summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorHannu Nyman <hannu.nyman@iki.fi>2018-08-13 23:10:47 +0300
committerMathias Kresin <dev@kresin.me>2018-08-14 10:19:37 +0200
commit437e35f8a3988cadf8797354e78cce3696b90916 (patch)
tree98c67f09d8c87880f67b18ec73f71ed3bc0145ca
parentb2a33d5463e88b74b021711d7f392edeafe61041 (diff)
downloadmtk-20170518-437e35f8a3988cadf8797354e78cce3696b90916.zip
mtk-20170518-437e35f8a3988cadf8797354e78cce3696b90916.tar.gz
mtk-20170518-437e35f8a3988cadf8797354e78cce3696b90916.tar.bz2
ath79: Add wifi to WNDR3700, WNDR3700v2 and WNDR3800
Add ath9k wifi capabilities to WNDR3700 family. * use kmod-owl-loader to load firmware from "art" * add wifi to DTS * add wifi LEDs Avoid using the same MAC for eth0 LAN and wlan0 by toggling the eth0 MAC into a locally administered MAC. That is currently done by in user-space by adding a uci config item into /etc/config/network (More elegant solution might be setting it already in preinit phase.) Known issues: * wifi firmware file may not get created on the first boot after flashing on time to bring wifi normally up. Likely the overlay jffs2 is not yet ready for creating the firmware file. "wifi up" may still bring wifi up. Wifi will work normally at subsequent boots. * phy0 and phy1 may get assigned mixed, so that phy0 may be the 5GHz radio instead of the normal 2.4GHz, and vice versa for phy1. Does not happen always, but may happen. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> [fix the wifi unit address in the dts] Signed-off-by: Mathias Kresin <dev@kresin.me>
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network5
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom10
-rw-r--r--target/linux/ath79/dts/ar7161_netgear_wndr3700.dtsi34
-rw-r--r--target/linux/ath79/image/generic.mk2
4 files changed, 50 insertions, 1 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 68f9523..da98061 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -160,6 +160,11 @@ ath79_setup_macs()
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
;;
+ netgear,wndr3700|\
+ netgear,wndr3700v2|\
+ netgear,wndr3800)
+ lan_mac=$(macaddr_setbit_la "$(mtd_get_mac_binary art 0)")
+ ;;
phicomm,k2t)
lan_mac=$(k2t_get_mac "lan_mac")
wan_mac=$(k2t_get_mac "wan_mac")
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 29c11bb..f71139c 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -146,6 +146,11 @@ case "$FIRMWARE" in
ath9k_eeprom_extract "caldata" 4096 3768
ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 65440) 524
;;
+ netgear,wndr3700|\
+ netgear,wndr3700v2|\
+ netgear,wndr3800)
+ ath9k_eeprom_extract "art" 4096 3768
+ ;;
*)
ath9k_eeprom_die "board $board is not supported yet"
;;
@@ -157,6 +162,11 @@ case "$FIRMWARE" in
ath9k_eeprom_extract "caldata" 20480 3768
ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 65460) 1) 524
;;
+ netgear,wndr3700|\
+ netgear,wndr3700v2|\
+ netgear,wndr3800)
+ ath9k_eeprom_extract "art" 20480 3768
+ ;;
*)
ath9k_eeprom_die "board $board is not supported yet"
;;
diff --git a/target/linux/ath79/dts/ar7161_netgear_wndr3700.dtsi b/target/linux/ath79/dts/ar7161_netgear_wndr3700.dtsi
index f3751d5..ef9984c 100644
--- a/target/linux/ath79/dts/ar7161_netgear_wndr3700.dtsi
+++ b/target/linux/ath79/dts/ar7161_netgear_wndr3700.dtsi
@@ -67,6 +67,22 @@
};
};
+ ath9k-leds {
+ compatible = "gpio-leds";
+ wlan2g {
+ label = "netgear:green:wlan2g";
+ gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
+ };
+ wlan5g {
+ label = "netgear:blue:wlan5g";
+ gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <100>;
@@ -138,6 +154,24 @@
&pcie0 {
status = "okay";
+
+ ath9k0: wifi@0,11 {
+ compatible = "pci168c,0029";
+ reg = <0x8800 0 0 0 0x10000>;
+ mtd-mac-address = <&art 0x0>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ ath9k1: wifi@0,12 {
+ compatible = "pci168c,0029";
+ reg = <0x9000 0 0 0 0x10000>;
+ mtd-mac-address = <&art 0xc>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
};
&uart {
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 117198f..0102081 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -141,7 +141,7 @@ define Device/netgear_wndr3x00
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
- DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset kmod-owl-loader
endef
define Device/netgear_wndr3700