mvebu: Replace RTC initialization patch with upstreamed version

While we're at it, rename the patches to their proper git format-patch
name.

Tested on a Turris Omnia.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

3 files changed, 78 insertions, 74 deletions

diff --git a/target/linux/mvebu/patches-4.14/420-rtc-trimming-support.patch b/target/linux/mvebu/patches-4.14/420-rtc-armada38x-add-support-for-trimming-the-RTC.patch
index 2974a69..2974a69 100644
--- a/target/linux/mvebu/patches-4.14/420-rtc-trimming-support.patch
+++ b/target/linux/mvebu/patches-4.14/420-rtc-armada38x-add-support-for-trimming-the-RTC.patch
diff --git a/target/linux/mvebu/patches-4.14/421-rtc-armada38x-reset-after-rtc-power-loss.patch b/target/linux/mvebu/patches-4.14/421-rtc-armada38x-reset-after-rtc-power-loss.patch
new file mode 100644
index 0000000..e9291c4
--- /dev/null
+++ b/target/linux/mvebu/patches-4.14/421-rtc-armada38x-reset-after-rtc-power-loss.patch
@@ -0,0 +1,78 @@
+From 1a990fefb641398fb580a0ea0be99b0ff27cbb9b Mon Sep 17 00:00:00 2001
+From: Baruch Siach <baruch@tkos.co.il>
+Date: Thu, 21 Jun 2018 20:40:23 +0300
+Subject: [PATCH] rtc: armada38x: reset after rtc power loss
+
+When the RTC block looses power it needs a reset sequence to make it
+usable again. Otherwise, writes to the time register have no effect.
+
+This reset sequence combines information from the mvebu_rtc driver in
+the Marvell provided U-Boot, and the SolidRun provided U-Boot repo.
+
+Tested on the Armada 388 based SolidRun Clearfog Base.
+
+Signed-off-by: Baruch Siach <baruch@tkos.co.il>
+Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
+Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
+---
+ drivers/rtc/rtc-armada38x.c | 23 +++++++++++++++++++++++
+ 1 file changed, 23 insertions(+)
+
+diff --git a/drivers/rtc/rtc-armada38x.c b/drivers/rtc/rtc-armada38x.c
+index 1e4978c..bde53c8c 100644
+--- a/drivers/rtc/rtc-armada38x.c
++++ b/drivers/rtc/rtc-armada38x.c
+@@ -30,6 +30,8 @@
+ #define RTC_IRQ_FREQ_1HZ	    BIT(2)
+ #define RTC_CCR		    0x18
+ #define RTC_CCR_MODE		    BIT(15)
++#define RTC_CONF_TEST	    0x1C
++#define RTC_NOMINAL_TIMING	    BIT(13)
+ 
+ #define RTC_TIME	    0xC
+ #define RTC_ALARM1	    0x10
+@@ -75,6 +77,7 @@ struct armada38x_rtc {
+ 	void __iomem	    *regs_soc;
+ 	spinlock_t	    lock;
+ 	int		    irq;
++	bool		    initialized;
+ 	struct value_to_freq *val_to_freq;
+ 	struct armada38x_rtc_data *data;
+ };
+@@ -226,6 +229,23 @@ static int armada38x_rtc_read_time(struct device *dev, struct rtc_time *tm)
+ 	return 0;
+ }
+ 
++static void armada38x_rtc_reset(struct armada38x_rtc *rtc)
++{
++	u32 reg;
++
++	reg = rtc->data->read_rtc_reg(rtc, RTC_CONF_TEST);
++	/* If bits [7:0] are non-zero, assume RTC was uninitialized */
++	if (reg & 0xff) {
++		rtc_delayed_write(0, rtc, RTC_CONF_TEST);
++		msleep(500); /* Oscillator startup time */
++		rtc_delayed_write(0, rtc, RTC_TIME);
++		rtc_delayed_write(SOC_RTC_ALARM1 | SOC_RTC_ALARM2, rtc,
++				  RTC_STATUS);
++		rtc_delayed_write(RTC_NOMINAL_TIMING, rtc, RTC_CCR);
++	}
++	rtc->initialized = true;
++}
++
+ static int armada38x_rtc_set_time(struct device *dev, struct rtc_time *tm)
+ {
+ 	struct armada38x_rtc *rtc = dev_get_drvdata(dev);
+@@ -237,6 +257,9 @@ static int armada38x_rtc_set_time(struct device *dev, struct rtc_time *tm)
+ 	if (ret)
+ 		goto out;
+ 
++	if (!rtc->initialized)
++		armada38x_rtc_reset(rtc);
++
+ 	spin_lock_irqsave(&rtc->lock, flags);
+ 	rtc_delayed_write(time, rtc, RTC_TIME);
+ 	spin_unlock_irqrestore(&rtc->lock, flags);
+-- 
+2.7.4
+
diff --git a/target/linux/mvebu/patches-4.14/421-rtc-initialize.patch b/target/linux/mvebu/patches-4.14/421-rtc-initialize.patch
deleted file mode 100644
index 47a5acc..0000000
--- a/target/linux/mvebu/patches-4.14/421-rtc-initialize.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-Some boards like the Turris Omnia have an RTC chip that does not get
-initialized. Initializing the RTC at the driver level helps get rid of
-bootloader hacks that write special register values.
-
---- a/drivers/rtc/rtc-armada38x.c
-+++ b/drivers/rtc/rtc-armada38x.c
-@@ -30,6 +30,9 @@
- #define RTC_IRQ_FREQ_1HZ	    BIT(2)
- #define RTC_CCR		    0x18
- #define RTC_CCR_MODE		    BIT(15)
-+#define RTC_CCR_NORMAL_PPB	    0x2000
-+#define RTC_TEST_CONF		    0x1c
-+#define RTC_TEST_CONF_MASK	    0xff
- 
- #define RTC_TIME	    0xC
- #define RTC_ALARM1	    0x10
-@@ -91,6 +94,7 @@ struct armada38x_rtc_data {
- 	void (*clear_isr)(struct armada38x_rtc *rtc);
- 	void (*unmask_interrupt)(struct armada38x_rtc *rtc);
- 	u32 alarm;
-+	void (*init_rtc)(struct armada38x_rtc *rtc);
- };
- 
- /*
-@@ -202,6 +206,23 @@ static void armada38x_unmask_interrupt(s
- 	writel(val | SOC_RTC_ALARM1_MASK, rtc->regs_soc + SOC_RTC_INTERRUPT);
- }
- 
-+static void armada38x_rtc_init(struct armada38x_rtc *rtc)
-+{
-+	u32 reg;
-+
-+	/* Test RTC test configuration register bits [7:0] */
-+	reg = readl(rtc->regs + RTC_TEST_CONF);
-+	/* If bits [7:0] are non-zero, assume RTC was uninitialized */
-+	if (reg & RTC_TEST_CONF_MASK) {
-+		rtc_delayed_write(0, rtc, RTC_TEST_CONF);
-+		rtc_delayed_write(0, rtc, RTC_TIME);
-+		rtc_delayed_write((RTC_STATUS_ALARM1 | RTC_STATUS_ALARM2),
-+				rtc, RTC_STATUS);
-+		rtc_delayed_write(RTC_CCR_NORMAL_PPB, rtc, RTC_CCR);
-+	}
-+	return;
-+}
-+
- static void armada8k_clear_isr(struct armada38x_rtc *rtc)
- {
- 	writel(RTC_8K_ALARM2, rtc->regs_soc + RTC_8K_ISR);
-@@ -464,6 +485,7 @@ static const struct armada38x_rtc_data a
- 	.clear_isr = armada38x_clear_isr,
- 	.unmask_interrupt = armada38x_unmask_interrupt,
- 	.alarm = ALARM1,
-+	.init_rtc = armada38x_rtc_init,
- };
- 
- static const struct armada38x_rtc_data armada8k_data = {
-@@ -558,6 +580,17 @@ static __init int armada38x_rtc_probe(st
- 		dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret);
- 		return ret;
- 	}
-+
-+	/*
-+	 * Try to detect if RTC is in uninitialized state.
-+	 * It is not definitive to know if the RTC is in an uninialized state or not,
-+	 * but the following call will read some bits in the RTC unit and guess if
-+	 * if it's in that state, and accordingly set it to sane default values.
-+	 */
-+	if (rtc->data->init_rtc) {
-+		rtc->data->init_rtc(rtc);
-+	}
-+
- 	return 0;
- }
-