summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMirko Vogt <mirko@openwrt.org>2013-01-07 14:10:01 +0000
committerMirko Vogt <mirko@openwrt.org>2013-01-07 14:10:01 +0000
commit12a6622bd938614b9758d20d136c78a0c67e7155 (patch)
tree7d85ef4c53b7d36975b36a83369786d622f8c268
parentc86485210ba6136bc90fc2708611ae5a609b6bf1 (diff)
downloadmtk-20170518-12a6622bd938614b9758d20d136c78a0c67e7155.zip
mtk-20170518-12a6622bd938614b9758d20d136c78a0c67e7155.tar.gz
mtk-20170518-12a6622bd938614b9758d20d136c78a0c67e7155.tar.bz2
This patch updates uboot-xburst from 2009.11 to 2012.10-rc2 - Ingenic SoC support went upstream
Summary: * remove all files/* (since merged to upstream) * patches on nand-spl, mmc and lcd driver Thanks a lot to Xiangfu Liu! Signed-off-by: Xiangfu Liu <xiangfu@sharism.cc> SVN-Revision: 35034
-rw-r--r--package/boot/uboot-xburst/Makefile33
-rw-r--r--package/boot/uboot-xburst/files/board/n516/Makefile40
-rw-r--r--package/boot/uboot-xburst/files/board/n516/config.mk33
-rw-r--r--package/boot/uboot-xburst/files/board/n516/flash.c50
-rw-r--r--package/boot/uboot-xburst/files/board/n516/n516.c126
-rw-r--r--package/boot/uboot-xburst/files/board/n516/u-boot-nand.lds63
-rw-r--r--package/boot/uboot-xburst/files/board/n516/u-boot.lds63
-rw-r--r--package/boot/uboot-xburst/files/board/nanonote/Makefile38
-rw-r--r--package/boot/uboot-xburst/files/board/nanonote/config.mk31
-rw-r--r--package/boot/uboot-xburst/files/board/nanonote/nanonote.c123
-rw-r--r--package/boot/uboot-xburst/files/board/nanonote/u-boot-nand.lds63
-rw-r--r--package/boot/uboot-xburst/files/board/nanonote/u-boot.lds63
-rw-r--r--package/boot/uboot-xburst/files/board/sakc/Makefile38
-rw-r--r--package/boot/uboot-xburst/files/board/sakc/config.mk31
-rw-r--r--package/boot/uboot-xburst/files/board/sakc/sakc.c94
-rw-r--r--package/boot/uboot-xburst/files/board/sakc/u-boot-nand.lds63
-rw-r--r--package/boot/uboot-xburst/files/board/sakc/u-boot.lds63
-rw-r--r--package/boot/uboot-xburst/files/cpu/mips/jz4740.c559
-rw-r--r--package/boot/uboot-xburst/files/cpu/mips/jz4740_nand.c199
-rw-r--r--package/boot/uboot-xburst/files/cpu/mips/jz_lcd.c484
-rw-r--r--package/boot/uboot-xburst/files/cpu/mips/jz_lcd.h260
-rw-r--r--package/boot/uboot-xburst/files/cpu/mips/jz_mmc.c1416
-rw-r--r--package/boot/uboot-xburst/files/cpu/mips/jz_mmc.h113
-rw-r--r--package/boot/uboot-xburst/files/cpu/mips/jz_serial.c141
-rw-r--r--package/boot/uboot-xburst/files/cpu/mips/mmc_protocol.h273
-rw-r--r--package/boot/uboot-xburst/files/cpu/mips/nanonote_gpm940b0.c420
-rw-r--r--package/boot/uboot-xburst/files/cpu/mips/nanonote_gpm940b0.h234
-rw-r--r--package/boot/uboot-xburst/files/cpu/mips/usb_boot.S880
-rw-r--r--package/boot/uboot-xburst/files/include/asm-mips/jz4740.h4892
-rw-r--r--package/boot/uboot-xburst/files/include/configs/avt2.h26
-rw-r--r--package/boot/uboot-xburst/files/include/configs/n516.h311
-rw-r--r--package/boot/uboot-xburst/files/include/configs/nanonote.h191
-rw-r--r--package/boot/uboot-xburst/files/include/configs/qi_lb60.h27
-rw-r--r--package/boot/uboot-xburst/files/include/configs/sakc.h200
-rw-r--r--package/boot/uboot-xburst/files/nand_spl/board/n516/Makefile104
-rw-r--r--package/boot/uboot-xburst/files/nand_spl/board/n516/config.mk34
-rw-r--r--package/boot/uboot-xburst/files/nand_spl/board/n516/u-boot.lds63
-rw-r--r--package/boot/uboot-xburst/files/nand_spl/board/nanonote/Makefile104
-rw-r--r--package/boot/uboot-xburst/files/nand_spl/board/nanonote/config.mk34
-rw-r--r--package/boot/uboot-xburst/files/nand_spl/board/nanonote/u-boot.lds63
-rw-r--r--package/boot/uboot-xburst/files/nand_spl/board/sakc/Makefile104
-rw-r--r--package/boot/uboot-xburst/files/nand_spl/board/sakc/config.mk34
-rw-r--r--package/boot/uboot-xburst/files/nand_spl/board/sakc/u-boot.lds63
-rw-r--r--package/boot/uboot-xburst/files/nand_spl/nand_boot_jz4740.c429
-rw-r--r--package/boot/uboot-xburst/patches/0001-qi_lb60-add-nand-spl-support.patch894
-rw-r--r--package/boot/uboot-xburst/patches/0002-qi_lb60-add-software-usbboot-support.patch916
-rw-r--r--package/boot/uboot-xburst/patches/0003-add-mmc-support.patch1664
-rw-r--r--package/boot/uboot-xburst/patches/0004-add-more-boot-options-F1-F2-F3-F4-M-S.patch200
-rw-r--r--package/boot/uboot-xburst/patches/0005-add-nanonote-lcd-support.patch847
-rw-r--r--package/boot/uboot-xburst/patches/0006-enable-silent-console.patch60
-rw-r--r--package/boot/uboot-xburst/patches/001-xburst.patch1669
-rw-r--r--package/boot/uboot-xburst/patches/005-i2c.patch13
-rw-r--r--package/boot/uboot-xburst/patches/009-n516.patch23
-rw-r--r--package/boot/uboot-xburst/patches/010-sakc.patch32
54 files changed, 4588 insertions, 14403 deletions
diff --git a/package/boot/uboot-xburst/Makefile b/package/boot/uboot-xburst/Makefile
index 1d340fd..1115d25 100644
--- a/package/boot/uboot-xburst/Makefile
+++ b/package/boot/uboot-xburst/Makefile
@@ -9,13 +9,13 @@ include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=u-boot
-PKG_VERSION:=2009.11
+PKG_VERSION:=2012.10-rc2
PKG_RELEASE:=1
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
PKG_SOURCE_URL:=ftp://ftp.denx.de/pub/u-boot
-PKG_MD5SUM:=
+PKG_MD5SUM:=451c07271940016cec6f5ad8a155263b
PKG_TARGETS:=bin
include $(INCLUDE_DIR)/package.mk
@@ -30,20 +30,7 @@ define uboot/qi_lb60
TITLE:=U-boot for the qi_lb60 board
endef
-define uboot/avt2
- TITLE:=U-boot for the avt2 board
-endef
-
-define uboot/sakc
- TITLE:=U-boot for the sakc board
-endef
-
-define uboot/n516
- TITLE:=U-boot for the N516 e-book reader
- CONFIG:=n516_nand
-endef
-
-UBOOTS:=qi_lb60 n516 avt2 sakc
+UBOOTS:=qi_lb60
define Package/uboot/template
define Package/uboot-xburst-$(1)
@@ -51,7 +38,7 @@ define Package/uboot-xburst-$(1)
CATEGORY:=Boot Loaders
DEPENDS:=@TARGET_xburst
TITLE:=$(2)
- URL:=http://www.denx.de/wiki/U-Boot
+ URL:=http://www.denx.de/wiki/UBoot/WebHome
VARIANT:=$(1)
endef
endef
@@ -66,15 +53,9 @@ endef
ifdef BUILD_VARIANT
$(eval $(call uboot/$(BUILD_VARIANT)))
UBOOT_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT))
-UBOOT_IMAGE:=$(if $(IMAGE),$(IMAGE),openwrt-$(BOARD)-$(BUILD_VARIANT)-u-boot.bin)
+UBOOT_IMAGE:=$(if $(IMAGE),$(IMAGE),openwrt-$(BOARD)-$(BUILD_BARIANT)-u-boot.bin)
endif
-define Build/Prepare
- $(call Build/Prepare/Default)
- $(CP) ./files/* $(PKG_BUILD_DIR)
- find $(PKG_BUILD_DIR) -name .svn | $(XARGS) rm -rf
-endef
-
define Build/Configure
$(MAKE) -C $(PKG_BUILD_DIR) \
$(UBOOT_CONFIG)_config
@@ -87,8 +68,8 @@ endef
define Package/uboot/install/template
define Package/uboot-xburst-$(1)/install
- $(INSTALL_DIR) $$(1)
- $(CP) $(PKG_BUILD_DIR)/u-boot-nand.bin $(BIN_DIR)/$(2)
+ $(CP) $(PKG_BUILD_DIR)/u-boot-xburst.bin $(BIN_DIR)/$(2)
+ rmdir $$(1)
endef
endef
diff --git a/package/boot/uboot-xburst/files/board/n516/Makefile b/package/boot/uboot-xburst/files/board/n516/Makefile
deleted file mode 100644
index da3bb4c..0000000
--- a/package/boot/uboot-xburst/files/board/n516/Makefile
+++ /dev/null
@@ -1,40 +0,0 @@
-#
-# (C) Copyright 2006
-# Ingenic Semiconductor, <jlwei@ingenic.cn>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).a
-
-COBJS = $(BOARD).o flash.o
-
-OBJS = $(addprefix $(obj),$(COBJS))
-SOBJS =
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
-
-#########################################################################
-
-$(obj).depend: Makefile $(SOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(COBJS:.o=.c) > $@
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/package/boot/uboot-xburst/files/board/n516/config.mk b/package/boot/uboot-xburst/files/board/n516/config.mk
deleted file mode 100644
index 4bfe680..0000000
--- a/package/boot/uboot-xburst/files/board/n516/config.mk
+++ /dev/null
@@ -1,33 +0,0 @@
-#
-# (C) Copyright 2006
-# Ingenic Semiconductor, <jlwei@ingenic.cn>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# Hanvon n516 e-book, MIPS32 core
-#
-
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifndef TEXT_BASE
-# ROM version
-TEXT_BASE = 0x88000000
-
-# RAM version
-#TEXT_BASE = 0x80100000
-endif
diff --git a/package/boot/uboot-xburst/files/board/n516/flash.c b/package/boot/uboot-xburst/files/board/n516/flash.c
deleted file mode 100644
index fd5f815..0000000
--- a/package/boot/uboot-xburst/files/board/n516/flash.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * (C) Copyright 2006
- * Ingenic Semiconductor, <jlwei@ingenic.cn>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-unsigned long flash_init (void)
-{
- return (0);
-}
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- printf ("flash_erase not implemented\n");
- return 0;
-}
-
-void flash_print_info (flash_info_t * info)
-{
- printf ("flash_print_info not implemented\n");
-}
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- printf ("write_buff not implemented\n");
- return (-1);
-}
diff --git a/package/boot/uboot-xburst/files/board/n516/n516.c b/package/boot/uboot-xburst/files/board/n516/n516.c
deleted file mode 100644
index d788596..0000000
--- a/package/boot/uboot-xburst/files/board/n516/n516.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * (C) Copyright 2006
- * Ingenic Semiconductor, <jlwei@ingenic.cn>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/mipsregs.h>
-#include <asm/jz4740.h>
-#include <asm/addrspace.h>
-#include <asm/cacheops.h>
-
-void _machine_restart(void)
-{
- __wdt_select_extalclk();
- __wdt_select_clk_div64();
- __wdt_set_data(100);
- __wdt_set_count(0);
- __tcu_start_wdt_clock();
- __wdt_start();
- while(1);
-
-}
-
-static void gpio_init(void)
-{
-
- REG_GPIO_PXPES(0) = 0xffffffff;
- REG_GPIO_PXPES(1) = 0xffffffff;
- REG_GPIO_PXPES(2) = 0xffffffff;
- REG_GPIO_PXPES(3) = 0xffffffff;
-
- /*
- * Initialize NAND Flash Pins
- */
- __gpio_as_nand();
-
- /*
- * Initialize SDRAM pins
- */
- __gpio_as_sdram_32bit();
-
- /*
- * Initialize UART0 pins
- */
- __gpio_as_uart0();
-
- /*
- * Initialize MSC pins
- */
- __gpio_as_msc();
-
- /*
- * Initialize LCD pins
- */
- __gpio_as_lcd_16bit();
-
- /*
- * Initialize Other pins
- */
- __gpio_as_output(GPIO_SD_VCC_EN_N);
- __gpio_clear_pin(GPIO_SD_VCC_EN_N);
-
- __gpio_as_input(GPIO_SD_CD_N);
- __gpio_disable_pull(GPIO_SD_CD_N);
-
- __gpio_as_output(GPIO_DISP_OFF_N);
-
- __gpio_as_output(GPIO_LED_EN);
- __gpio_set_pin(GPIO_LED_EN);
-
- __gpio_as_input(127);
-}
-
-static void cpm_init(void)
-{
- __cpm_stop_ipu();
- __cpm_stop_cim();
- __cpm_stop_i2c();
- __cpm_stop_ssi();
- __cpm_stop_uart1();
- __cpm_stop_sadc();
- __cpm_stop_uhc();
- __cpm_stop_udc();
- __cpm_stop_aic1();
- __cpm_stop_aic2();
- __cpm_suspend_udcphy();
- __cpm_suspend_usbphy();
-}
-
-//----------------------------------------------------------------------
-// board early init routine
-
-void board_early_init(void)
-{
- gpio_init();
- cpm_init();
-}
-
-//----------------------------------------------------------------------
-// U-Boot common routines
-
-int checkboard (void)
-{
- DECLARE_GLOBAL_DATA_PTR;
-
- printf("Board: Hanvon n516 e-book (CPU Speed %d MHz)\n",
- gd->cpu_clk/1000000);
-
- return 0; /* success */
-}
diff --git a/package/boot/uboot-xburst/files/board/n516/u-boot-nand.lds b/package/boot/uboot-xburst/files/board/n516/u-boot-nand.lds
deleted file mode 100644
index a15a96e..0000000
--- a/package/boot/uboot-xburst/files/board/n516/u-boot-nand.lds
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * (C) Copyright 2006
- * Ingenic Semiconductor, <jlwei@ingenic.cn>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips")
-
-OUTPUT_ARCH(mips)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- *(.text)
- }
-
- . = ALIGN(4);
- .rodata : { *(.rodata) }
-
- . = ALIGN(4);
- .data : { *(.data) }
-
- . = ALIGN(4);
- .sdata : { *(.sdata) }
-
- _gp = ALIGN(16);
-
- __got_start = .;
- .got : { *(.got) }
- __got_end = .;
-
- .sdata : { *(.sdata) }
-
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- uboot_end_data = .;
- num_got_entries = (__got_end - __got_start) >> 2;
-
- . = ALIGN(4);
- .sbss : { *(.sbss) }
- .bss : { *(.bss) }
- uboot_end = .;
-}
diff --git a/package/boot/uboot-xburst/files/board/n516/u-boot.lds b/package/boot/uboot-xburst/files/board/n516/u-boot.lds
deleted file mode 100644
index a15a96e..0000000
--- a/package/boot/uboot-xburst/files/board/n516/u-boot.lds
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * (C) Copyright 2006
- * Ingenic Semiconductor, <jlwei@ingenic.cn>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips")
-
-OUTPUT_ARCH(mips)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- *(.text)
- }
-
- . = ALIGN(4);
- .rodata : { *(.rodata) }
-
- . = ALIGN(4);
- .data : { *(.data) }
-
- . = ALIGN(4);
- .sdata : { *(.sdata) }
-
- _gp = ALIGN(16);
-
- __got_start = .;
- .got : { *(.got) }
- __got_end = .;
-
- .sdata : { *(.sdata) }
-
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- uboot_end_data = .;
- num_got_entries = (__got_end - __got_start) >> 2;
-
- . = ALIGN(4);
- .sbss : { *(.sbss) }
- .bss : { *(.bss) }
- uboot_end = .;
-}
diff --git a/package/boot/uboot-xburst/files/board/nanonote/Makefile b/package/boot/uboot-xburst/files/board/nanonote/Makefile
deleted file mode 100644
index 2c726a7..0000000
--- a/package/boot/uboot-xburst/files/board/nanonote/Makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-# (C) Copyright 2006
-# Ingenic Semiconductor, <jlwei@ingenic.cn>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = lib$(BOARD).a
-
-OBJS = $(BOARD).o
-SOBJS =
-
-$(LIB): .depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
-
-#########################################################################
-
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-
-sinclude .depend
-
-#########################################################################
diff --git a/package/boot/uboot-xburst/files/board/nanonote/config.mk b/package/boot/uboot-xburst/files/board/nanonote/config.mk
deleted file mode 100644
index 858e6a2..0000000
--- a/package/boot/uboot-xburst/files/board/nanonote/config.mk
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# (C) Copyright 2006 Qi Hardware, Inc.
-# Author: Xiangfu Liu <xiangfu.z@gmail.com>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# Qi Hardware, Inc. Ben NanoNote (QI_LB60)
-#
-
-ifndef TEXT_BASE
-# ROM version
-# TEXT_BASE = 0x88000000
-
-# RAM version
-TEXT_BASE = 0x80100000
-endif
diff --git a/package/boot/uboot-xburst/files/board/nanonote/nanonote.c b/package/boot/uboot-xburst/files/board/nanonote/nanonote.c
deleted file mode 100644
index 96a3c7d..0000000
--- a/package/boot/uboot-xburst/files/board/nanonote/nanonote.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * Authors: Xiangfu Liu <xiangfu.z@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 3 of the License, or (at your option) any later version.
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/mipsregs.h>
-#include <asm/jz4740.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void gpio_init(void)
-{
- /*
- * Initialize NAND Flash Pins
- */
- __gpio_as_nand();
-
- /*
- * Initialize SDRAM pins
- */
- __gpio_as_sdram_32bit();
-
- /*
- * Initialize LCD pins
- */
- __gpio_as_lcd_8bit();
-
- /*
- * Initialize MSC pins
- */
- __gpio_as_msc();
-
- /*
- * Initialize Other pins
- */
- unsigned int i;
- for (i = 0; i < 7; i++){
- __gpio_as_input(GPIO_KEYIN_BASE + i);
- __gpio_enable_pull(GPIO_KEYIN_BASE + i);
- }
-
- for (i = 0; i < 8; i++) {
- __gpio_as_output(GPIO_KEYOUT_BASE + i);
- __gpio_clear_pin(GPIO_KEYOUT_BASE + i);
- }
-
- /*
- * Initialize UART0 pins, in Ben NanoNote uart0 and keyin8 use the
- * same gpio, init the gpio as uart0 cause a keyboard bug. so for
- * end user we disable the uart0
- */
- if (__gpio_get_pin(GPIO_KEYIN_BASE + 2) == 0){
- /* if pressed [S] */
- printf("[S] pressed, enable UART0\n");
- gd->boot_option = 5;
- __gpio_as_uart0();
- } else {
- printf("[S] not pressed, disable UART0\n");
- __gpio_as_input(GPIO_KEYIN_8);
- __gpio_enable_pull(GPIO_KEYIN_8);
- }
-
- __gpio_as_output(GPIO_AUDIO_POP);
- __gpio_set_pin(GPIO_AUDIO_POP);
-
- __gpio_as_output(GPIO_LCD_CS);
- __gpio_clear_pin(GPIO_LCD_CS);
-
- __gpio_as_output(GPIO_AMP_EN);
- __gpio_clear_pin(GPIO_AMP_EN);
-
- __gpio_as_output(GPIO_SDPW_EN);
- __gpio_disable_pull(GPIO_SDPW_EN);
- __gpio_clear_pin(GPIO_SDPW_EN);
-
- __gpio_as_input(GPIO_SD_DETECT);
- __gpio_disable_pull(GPIO_SD_DETECT);
-
- __gpio_as_input(GPIO_USB_DETECT);
- __gpio_enable_pull(GPIO_USB_DETECT);
-
- if (__gpio_get_pin(GPIO_KEYIN_BASE + 3) == 0) {
- printf("[M] pressed, boot from sd card\n");
- gd->boot_option = 1;
- }
-}
-
-static void cpm_init(void)
-{
- __cpm_stop_ipu();
- __cpm_stop_cim();
- __cpm_stop_i2c();
- __cpm_stop_ssi();
- __cpm_stop_uart1();
- __cpm_stop_sadc();
- __cpm_stop_uhc();
- __cpm_stop_udc();
- __cpm_stop_aic1();
-/* __cpm_stop_aic2();*/
-}
-
-void board_early_init(void)
-{
- gpio_init();
- cpm_init();
-}
-
-/* U-Boot common routines */
-
-int checkboard (void)
-{
-
- printf("Board: Qi LB60 (Ingenic XBurst Jz4740 SoC, Speed %d MHz)\n",
- gd->cpu_clk/1000000);
-
- return 0; /* success */
-}
diff --git a/package/boot/uboot-xburst/files/board/nanonote/u-boot-nand.lds b/package/boot/uboot-xburst/files/board/nanonote/u-boot-nand.lds
deleted file mode 100644
index a15a96e..0000000
--- a/package/boot/uboot-xburst/files/board/nanonote/u-boot-nand.lds
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * (C) Copyright 2006
- * Ingenic Semiconductor, <jlwei@ingenic.cn>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips")
-
-OUTPUT_ARCH(mips)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- *(.text)
- }
-
- . = ALIGN(4);
- .rodata : { *(.rodata) }
-
- . = ALIGN(4);
- .data : { *(.data) }
-
- . = ALIGN(4);
- .sdata : { *(.sdata) }
-
- _gp = ALIGN(16);
-
- __got_start = .;
- .got : { *(.got) }
- __got_end = .;
-
- .sdata : { *(.sdata) }
-
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- uboot_end_data = .;
- num_got_entries = (__got_end - __got_start) >> 2;
-
- . = ALIGN(4);
- .sbss : { *(.sbss) }
- .bss : { *(.bss) }
- uboot_end = .;
-}
diff --git a/package/boot/uboot-xburst/files/board/nanonote/u-boot.lds b/package/boot/uboot-xburst/files/board/nanonote/u-boot.lds
deleted file mode 100644
index a15a96e..0000000
--- a/package/boot/uboot-xburst/files/board/nanonote/u-boot.lds
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * (C) Copyright 2006
- * Ingenic Semiconductor, <jlwei@ingenic.cn>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips")
-
-OUTPUT_ARCH(mips)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- *(.text)
- }
-
- . = ALIGN(4);
- .rodata : { *(.rodata) }
-
- . = ALIGN(4);
- .data : { *(.data) }
-
- . = ALIGN(4);
- .sdata : { *(.sdata) }
-
- _gp = ALIGN(16);
-
- __got_start = .;
- .got : { *(.got) }
- __got_end = .;
-
- .sdata : { *(.sdata) }
-
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- uboot_end_data = .;
- num_got_entries = (__got_end - __got_start) >> 2;
-
- . = ALIGN(4);
- .sbss : { *(.sbss) }
- .bss : { *(.bss) }
- uboot_end = .;
-}
diff --git a/package/boot/uboot-xburst/files/board/sakc/Makefile b/package/boot/uboot-xburst/files/board/sakc/Makefile
deleted file mode 100644
index 470447d..0000000
--- a/package/boot/uboot-xburst/files/board/sakc/Makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-# (C) Copyright 2006
-# Ingenic Semiconductor, <jlwei@ingenic.cn>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = lib$(BOARD).a
-
-OBJS = $(BOARD).o
-SOBJS =
-
-$(LIB): .depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
-
-#########################################################################
-
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-
-sinclude .depend
-
-#########################################################################
diff --git a/package/boot/uboot-xburst/files/board/sakc/config.mk b/package/boot/uboot-xburst/files/board/sakc/config.mk
deleted file mode 100644
index b254958..0000000
--- a/package/boot/uboot-xburst/files/board/sakc/config.mk
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# (C) Copyright 2006 Qi Hardware, Inc.
-# Author: Xiangfu Liu <xiangfu.z@gmail.com>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# SAKC Board
-#
-
-ifndef TEXT_BASE
-# ROM version
-# TEXT_BASE = 0x88000000
-
-# RAM version
-TEXT_BASE = 0x80100000
-endif
diff --git a/package/boot/uboot-xburst/files/board/sakc/sakc.c b/package/boot/uboot-xburst/files/board/sakc/sakc.c
deleted file mode 100644
index 85763c7..0000000
--- a/package/boot/uboot-xburst/files/board/sakc/sakc.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Authors: Xiangfu Liu <xiangfu.z@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 3 of the License, or (at your option) any later version.
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/mipsregs.h>
-#include <asm/jz4740.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void gpio_init(void)
-{
- /*
- * Initialize NAND Flash Pins
- */
- __gpio_as_nand();
-
- /*
- * Initialize SDRAM pins
- */
- __gpio_as_sdram_16bit_4725();
-
- /*
- * Initialize UART0 pins
- */
- __gpio_as_uart0();
-
- /*
- * Initialize LCD pins
- */
- __gpio_as_lcd_18bit();
-
- /*
- * Initialize MSC pins
- */
- __gpio_as_msc();
-
- /*
- * Initialize SSI pins
- */
- __gpio_as_ssi();
-
- /*
- * Initialize I2C pins
- */
- __gpio_as_i2c();
-
- /*
- * Initialize MSC pins
- */
- __gpio_as_msc();
-
- /*
- * Initialize Other pins
- */
- __gpio_as_input(GPIO_SD_DETECT);
- __gpio_disable_pull(GPIO_SD_DETECT);
-}
-/* TODO SAKC
-static void cpm_init(void)
-{
- __cpm_stop_ipu();
- __cpm_stop_cim();
- __cpm_stop_i2c();
- __cpm_stop_ssi();
- __cpm_stop_uart1();
- __cpm_stop_sadc();
- __cpm_stop_uhc();
- __cpm_stop_aic1();
- __cpm_stop_aic2();
-}*/
-
-void board_early_init(void)
-{
- gpio_init();
- //cpm_init(); //TODO SAKC
-}
-
-/* U-Boot common routines */
-
-int checkboard (void)
-{
-
- printf("Board: SAKC (Ingenic XBurst Jz4725 SoC, Speed %d MHz)\n",
- gd->cpu_clk/1000000);
-
- return 0; /* success */
-}
diff --git a/package/boot/uboot-xburst/files/board/sakc/u-boot-nand.lds b/package/boot/uboot-xburst/files/board/sakc/u-boot-nand.lds
deleted file mode 100644
index a15a96e..0000000
--- a/package/boot/uboot-xburst/files/board/sakc/u-boot-nand.lds
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * (C) Copyright 2006
- * Ingenic Semiconductor, <jlwei@ingenic.cn>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips")
-
-OUTPUT_ARCH(mips)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- *(.text)
- }
-
- . = ALIGN(4);
- .rodata : { *(.rodata) }
-
- . = ALIGN(4);
- .data : { *(.data) }
-
- . = ALIGN(4);
- .sdata : { *(.sdata) }
-
- _gp = ALIGN(16);
-
- __got_start = .;
- .got : { *(.got) }
- __got_end = .;
-
- .sdata : { *(.sdata) }
-
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- uboot_end_data = .;
- num_got_entries = (__got_end - __got_start) >> 2;
-
- . = ALIGN(4);
- .sbss : { *(.sbss) }
- .bss : { *(.bss) }
- uboot_end = .;
-}
diff --git a/package/boot/uboot-xburst/files/board/sakc/u-boot.lds b/package/boot/uboot-xburst/files/board/sakc/u-boot.lds
deleted file mode 100644
index a15a96e..0000000
--- a/package/boot/uboot-xburst/files/board/sakc/u-boot.lds
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * (C) Copyright 2006
- * Ingenic Semiconductor, <jlwei@ingenic.cn>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips")
-
-OUTPUT_ARCH(mips)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- *(.text)
- }
-
- . = ALIGN(4);
- .rodata : { *(.rodata) }
-
- . = ALIGN(4);
- .data : { *(.data) }
-
- . = ALIGN(4);
- .sdata : { *(.sdata) }
-
- _gp = ALIGN(16);
-
- __got_start = .;
- .got : { *(.got) }
- __got_end = .;
-
- .sdata : { *(.sdata) }
-
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- uboot_end_data = .;
- num_got_entries = (__got_end - __got_start) >> 2;
-
- . = ALIGN(4);
- .sbss : { *(.sbss) }
- .bss : { *(.bss) }
- uboot_end = .;
-}
diff --git a/package/boot/uboot-xburst/files/cpu/mips/jz4740.c b/package/boot/uboot-xburst/files/cpu/mips/jz4740.c
deleted file mode 100644
index 5ae5797..0000000
--- a/package/boot/uboot-xburst/files/cpu/mips/jz4740.c
+++ /dev/null
@@ -1,559 +0,0 @@
-/*
- * Jz4740 common routines
- *
- * Copyright (c) 2006
- * Ingenic Semiconductor, <jlwei@ingenic.cn>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-
-#ifdef CONFIG_JZ4740
-#include <common.h>
-#include <command.h>
-#include <asm/jz4740.h>
-
-extern void board_early_init(void);
-
-/* PLL output clock = EXTAL * NF / (NR * NO)
- *
- * NF = FD + 2, NR = RD + 2
- * NO = 1 (if OD = 0), NO = 2 (if OD = 1 or 2), NO = 4 (if OD = 3)
- */
-void pll_init(void)
-{
- register unsigned int cfcr, plcr1;
- int n2FR[33] = {
- 0, 0, 1, 2, 3, 0, 4, 0, 5, 0, 0, 0, 6, 0, 0, 0,
- 7, 0, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0, 0, 0,
- 9
- };
- int div[5] = {1, 3, 3, 3, 3}; /* divisors of I:S:P:L:M */
- int nf, pllout2;
-
- cfcr = CPM_CPCCR_CLKOEN |
- CPM_CPCCR_PCS |
- (n2FR[div[0]] << CPM_CPCCR_CDIV_BIT) |
- (n2FR[div[1]] << CPM_CPCCR_HDIV_BIT) |
- (n2FR[div[2]] << CPM_CPCCR_PDIV_BIT) |
- (n2FR[div[3]] << CPM_CPCCR_MDIV_BIT) |
- (n2FR[div[4]] << CPM_CPCCR_LDIV_BIT);
-
- pllout2 = (cfcr & CPM_CPCCR_PCS) ? CONFIG_SYS_CPU_SPEED : (CONFIG_SYS_CPU_SPEED / 2);
-
- /* Init USB Host clock, pllout2 must be n*48MHz */
- REG_CPM_UHCCDR = pllout2 / 48000000 - 1;
-
- nf = CONFIG_SYS_CPU_SPEED * 2 / CONFIG_SYS_EXTAL;
- plcr1 = ((nf - 2) << CPM_CPPCR_PLLM_BIT) | /* FD */
- (0 << CPM_CPPCR_PLLN_BIT) | /* RD=0, NR=2 */
- (0 << CPM_CPPCR_PLLOD_BIT) | /* OD=0, NO=1 */
- (0x20 << CPM_CPPCR_PLLST_BIT) | /* PLL stable time */
- CPM_CPPCR_PLLEN; /* enable PLL */
-
- /* init PLL */
- REG_CPM_CPCCR = cfcr;
- REG_CPM_CPPCR = plcr1;
-}
-
-void pll_add_test(int new_freq)
-{
- register unsigned int cfcr, plcr1;
- int n2FR[33] = {
- 0, 0, 1, 2, 3, 0, 4, 0, 5, 0, 0, 0, 6, 0, 0, 0,
- 7, 0, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0, 0, 0,
- 9
- };
- int div[5] = {1, 4, 4, 4, 4}; /* divisors of I:S:P:M:L */
- int nf, pllout2;
-
- cfcr = CPM_CPCCR_CLKOEN |
- (n2FR[div[0]] << CPM_CPCCR_CDIV_BIT) |
- (n2FR[div[1]] << CPM_CPCCR_HDIV_BIT) |
- (n2FR[div[2]] << CPM_CPCCR_PDIV_BIT) |
- (n2FR[div[3]] << CPM_CPCCR_MDIV_BIT) |
- (n2FR[div[4]] << CPM_CPCCR_LDIV_BIT);
-
- pllout2 = (cfcr & CPM_CPCCR_PCS) ? new_freq : (new_freq / 2);
-
- /* Init UHC clock */
- REG_CPM_UHCCDR = pllout2 / 48000000 - 1;
-
- /* nf = new_freq * 2 / CONFIG_SYS_EXTAL; */
- nf = new_freq / 1000000; /* step length is 1M */
- plcr1 = ((nf - 2) << CPM_CPPCR_PLLM_BIT) | /* FD */
- (10 << CPM_CPPCR_PLLN_BIT) | /* RD=0, NR=2 */
- (0 << CPM_CPPCR_PLLOD_BIT) | /* OD=0, NO=1 */
- (0x20 << CPM_CPPCR_PLLST_BIT) | /* PLL stable time */
- CPM_CPPCR_PLLEN; /* enable PLL */
-
- /* init PLL */
- REG_CPM_CPCCR = cfcr;
- REG_CPM_CPPCR = plcr1;
-}
-
-void calc_clocks_add_test(void)
-{
- DECLARE_GLOBAL_DATA_PTR;
-
- unsigned int pllout;
- unsigned int div[10] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
-
- pllout = __cpm_get_pllout();
-
- gd->cpu_clk = pllout / div[__cpm_get_cdiv()];
- gd->sys_clk = pllout / div[__cpm_get_hdiv()];
- gd->per_clk = pllout / div[__cpm_get_pdiv()];
- gd->mem_clk = pllout / div[__cpm_get_mdiv()];
- gd->dev_clk = CONFIG_SYS_EXTAL;
-}
-
-void sdram_add_test(int new_freq)
-{
- register unsigned int dmcr, sdmode, tmp, cpu_clk, mem_clk, ns;
-
- unsigned int cas_latency_sdmr[2] = {
- EMC_SDMR_CAS_2,
- EMC_SDMR_CAS_3,
- };
-
- unsigned int cas_latency_dmcr[2] = {
- 1 << EMC_DMCR_TCL_BIT, /* CAS latency is 2 */
- 2 << EMC_DMCR_TCL_BIT /* CAS latency is 3 */
- };
-
- int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
-
- cpu_clk = new_freq;
- mem_clk = cpu_clk * div[__cpm_get_cdiv()] / div[__cpm_get_mdiv()];
-
- REG_EMC_RTCSR = EMC_RTCSR_CKS_DISABLE;
- REG_EMC_RTCOR = 0;
- REG_EMC_RTCNT = 0;
-
- /* Basic DMCR register value. */
- dmcr = ((SDRAM_ROW-11)<<EMC_DMCR_RA_BIT) |
- ((SDRAM_COL-8)<<EMC_DMCR_CA_BIT) |
- (SDRAM_BANK4<<EMC_DMCR_BA_BIT) |
- (SDRAM_BW16<<EMC_DMCR_BW_BIT) |
- EMC_DMCR_EPIN |
- cas_latency_dmcr[((SDRAM_CASL == 3) ? 1 : 0)];
-
- /* SDRAM timimg parameters */
- ns = 1000000000 / mem_clk;
-
-#if 0
- tmp = SDRAM_TRAS/ns;
- if (tmp < 4) tmp = 4;
- if (tmp > 11) tmp = 11;
- dmcr |= ((tmp-4) << EMC_DMCR_TRAS_BIT);
-
- tmp = SDRAM_RCD/ns;
- if (tmp > 3) tmp = 3;
- dmcr |= (tmp << EMC_DMCR_RCD_BIT);
-
- tmp = SDRAM_TPC/ns;
- if (tmp > 7) tmp = 7;
- dmcr |= (tmp << EMC_DMCR_TPC_BIT);
-
- tmp = SDRAM_TRWL/ns;
- if (tmp > 3) tmp = 3;
- dmcr |= (tmp << EMC_DMCR_TRWL_BIT);
-
- tmp = (SDRAM_TRAS + SDRAM_TPC)/ns;
- if (tmp > 14) tmp = 14;
- dmcr |= (((tmp + 1) >> 1) << EMC_DMCR_TRC_BIT);
-#else
- dmcr |= 0xfffc;
-#endif
-
- /* First, precharge phase */
- REG_EMC_DMCR = dmcr;
-
- /* Set refresh registers */
- tmp = SDRAM_TREF/ns;
- tmp = tmp/64 + 1;
- if (tmp > 0xff) tmp = 0xff;
-
- REG_EMC_RTCOR = tmp;
- REG_EMC_RTCSR = EMC_RTCSR_CKS_64; /* Divisor is 64, CKO/64 */
-
- /* SDRAM mode values */
- sdmode = EMC_SDMR_BT_SEQ |
- EMC_SDMR_OM_NORMAL |
- EMC_SDMR_BL_4 |
- cas_latency_sdmr[((SDRAM_CASL == 3) ? 1 : 0)];
-
- /* precharge all chip-selects */
- REG8(EMC_SDMR0|sdmode) = 0;
-
- /* wait for precharge, > 200us */
- tmp = (cpu_clk / 1000000) * 200;
- while (tmp--);
-
- /* enable refresh and set SDRAM mode */
- REG_EMC_DMCR = dmcr | EMC_DMCR_RFSH | EMC_DMCR_MRSET;
-
- /* write sdram mode register for each chip-select */
- REG8(EMC_SDMR0|sdmode) = 0;
-
- /* everything is ok now */
-}
-
-void sdram_init(void)
-{
- register unsigned int dmcr0, dmcr, sdmode, tmp, cpu_clk, mem_clk, ns;
-
- unsigned int cas_latency_sdmr[2] = {
- EMC_SDMR_CAS_2,
- EMC_SDMR_CAS_3,
- };
-
- unsigned int cas_latency_dmcr[2] = {
- 1 << EMC_DMCR_TCL_BIT, /* CAS latency is 2 */
- 2 << EMC_DMCR_TCL_BIT /* CAS latency is 3 */
- };
-
- int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
-
- cpu_clk = CONFIG_SYS_CPU_SPEED;
- mem_clk = cpu_clk * div[__cpm_get_cdiv()] / div[__cpm_get_mdiv()];
-
- REG_EMC_BCR = 0; /* Disable bus release */
- REG_EMC_RTCSR = 0; /* Disable clock for counting */
-
- /* Fault DMCR value for mode register setting*/
-#define SDRAM_ROW0 11
-#define SDRAM_COL0 8
-#define SDRAM_BANK40 0
-
- dmcr0 = ((SDRAM_ROW0-11)<<EMC_DMCR_RA_BIT) |
- ((SDRAM_COL0-8)<<EMC_DMCR_CA_BIT) |
- (SDRAM_BANK40<<EMC_DMCR_BA_BIT) |
- (SDRAM_BW16<<EMC_DMCR_BW_BIT) |
- EMC_DMCR_EPIN |
- cas_latency_dmcr[((SDRAM_CASL == 3) ? 1 : 0)];
-
- /* Basic DMCR value */
- dmcr = ((SDRAM_ROW-11)<<EMC_DMCR_RA_BIT) |
- ((SDRAM_COL-8)<<EMC_DMCR_CA_BIT) |
- (SDRAM_BANK4<<EMC_DMCR_BA_BIT) |
- (SDRAM_BW16<<EMC_DMCR_BW_BIT) |
- EMC_DMCR_EPIN |
- cas_latency_dmcr[((SDRAM_CASL == 3) ? 1 : 0)];
-
- /* SDRAM timimg */
- ns = 1000000000 / mem_clk;
- tmp = SDRAM_TRAS/ns;
- if (tmp < 4) tmp = 4;
- if (tmp > 11) tmp = 11;
- dmcr |= ((tmp-4) << EMC_DMCR_TRAS_BIT);
- tmp = SDRAM_RCD/ns;
- if (tmp > 3) tmp = 3;
- dmcr |= (tmp << EMC_DMCR_RCD_BIT);
- tmp = SDRAM_TPC/ns;
- if (tmp > 7) tmp = 7;
- dmcr |= (tmp << EMC_DMCR_TPC_BIT);
- tmp = SDRAM_TRWL/ns;
- if (tmp > 3) tmp = 3;
- dmcr |= (tmp << EMC_DMCR_TRWL_BIT);
- tmp = (SDRAM_TRAS + SDRAM_TPC)/ns;
- if (tmp > 14) tmp = 14;
- dmcr |= (((tmp + 1) >> 1) << EMC_DMCR_TRC_BIT);
-
- /* SDRAM mode value */
- sdmode = EMC_SDMR_BT_SEQ |
- EMC_SDMR_OM_NORMAL |
- EMC_SDMR_BL_4 |
- cas_latency_sdmr[((SDRAM_CASL == 3) ? 1 : 0)];
-
- /* Stage 1. Precharge all banks by writing SDMR with DMCR.MRSET=0 */
- REG_EMC_DMCR = dmcr;
- REG8(EMC_SDMR0|sdmode) = 0;
-
- /* Wait for precharge, > 200us */
- tmp = (cpu_clk / 1000000) * 1000;
- while (tmp--);
-
- /* Stage 2. Enable auto-refresh */
- REG_EMC_DMCR = dmcr | EMC_DMCR_RFSH;
-
- tmp = SDRAM_TREF/ns;
- tmp = tmp/64 + 1;
- if (tmp > 0xff) tmp = 0xff;
- REG_EMC_RTCOR = tmp;
- REG_EMC_RTCNT = 0;
- REG_EMC_RTCSR = EMC_RTCSR_CKS_64; /* Divisor is 64, CKO/64 */
-
- /* Wait for number of auto-refresh cycles */
- tmp = (cpu_clk / 1000000) * 1000;
- while (tmp--);
-
- /* Stage 3. Mode Register Set */
- REG_EMC_DMCR = dmcr0 | EMC_DMCR_RFSH | EMC_DMCR_MRSET;
- REG8(EMC_SDMR0|sdmode) = 0;
-
- /* Set back to basic DMCR value */
- REG_EMC_DMCR = dmcr | EMC_DMCR_RFSH | EMC_DMCR_MRSET;
-
- /* everything is ok now */
-}
-
-#ifndef CONFIG_NAND_SPL
-
-static void calc_clocks(void)
-{
- DECLARE_GLOBAL_DATA_PTR;
-
- unsigned int pllout;
- unsigned int div[10] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
-
- pllout = __cpm_get_pllout();
-
- gd->cpu_clk = pllout / div[__cpm_get_cdiv()];
- gd->sys_clk = pllout / div[__cpm_get_hdiv()];
- gd->per_clk = pllout / div[__cpm_get_pdiv()];
- gd->mem_clk = pllout / div[__cpm_get_mdiv()];
- gd->dev_clk = CONFIG_SYS_EXTAL;
-}
-
-static void rtc_init(void)
-{
- unsigned long rtcsta;
-
- while ( !__rtc_write_ready()) ;
- __rtc_enable_alarm(); /* enable alarm */
-
- while ( !__rtc_write_ready())
- ;
- REG_RTC_RGR = 0x00007fff; /* type value */
-
- while ( !__rtc_write_ready())
- ;
- REG_RTC_HWFCR = 0x0000ffe0; /* Power on delay 2s */
-
- while ( !__rtc_write_ready())
- ;
- REG_RTC_HRCR = 0x00000fe0; /* reset delay 125ms */
-#if 0
- while ( !__rtc_write_ready())
- ;
- rtcsta = REG_RTC_HWRSR;
- while ( !__rtc_write_ready())
- ;
- if (rtcsta & 0x33) {
- if (rtcsta & 0x10) {
- while ( !__rtc_write_ready())
- ;
- REG_RTC_RSR = 0x0;
- }
- while ( !__rtc_write_ready())
- ;
- REG_RTC_HWRSR = 0x0;
- }
-#endif
-}
-
-/*
- * jz4740 board init routine
- */
-int jz_board_init(void)
-{
- board_early_init(); /* init gpio, pll etc. */
-#ifndef CONFIG_NAND_U_BOOT
- pll_init(); /* init PLL */
- sdram_init(); /* init sdram memory */
-#endif
- calc_clocks(); /* calc the clocks */
- rtc_init(); /* init rtc on any reset: */
- return 0;
-}
-
-/* U-Boot common routines */
-phys_size_t initdram(int board_type)
-{
- u32 dmcr;
- u32 rows, cols, dw, banks;
- ulong size;
-
- dmcr = REG_EMC_DMCR;
- rows = 11 + ((dmcr & EMC_DMCR_RA_MASK) >> EMC_DMCR_RA_BIT);
- cols = 8 + ((dmcr & EMC_DMCR_CA_MASK) >> EMC_DMCR_CA_BIT);
- dw = (dmcr & EMC_DMCR_BW) ? 2 : 4;
- banks = (dmcr & EMC_DMCR_BA) ? 4 : 2;
-
- size = (1 << (rows + cols)) * dw * banks;
-
- return size;
-}
-
-/*
- * Timer routines
- */
-
-#define TIMER_CHAN 0
-#define TIMER_FDATA 0xffff /* Timer full data value */
-#define TIMER_HZ CONFIG_SYS_HZ
-
-#define READ_TIMER REG_TCU_TCNT(TIMER_CHAN) /* macro to read the 16 bit timer */
-
-static ulong timestamp;
-static ulong lastdec;
-
-void reset_timer_masked (void);
-ulong get_timer_masked (void);
-void udelay_masked (unsigned long usec);
-
-/*
- * timer without interrupts
- */
-
-int timer_init(void)
-{
- REG_TCU_TCSR(TIMER_CHAN) = TCU_TCSR_PRESCALE256 | TCU_TCSR_EXT_EN;
- REG_TCU_TCNT(TIMER_CHAN) = 0;
- REG_TCU_TDHR(TIMER_CHAN) = 0;
- REG_TCU_TDFR(TIMER_CHAN) = TIMER_FDATA;
-
- REG_TCU_TMSR = (1 << TIMER_CHAN) | (1 << (TIMER_CHAN + 16)); /* mask irqs */
- REG_TCU_TSCR = (1 << TIMER_CHAN); /* enable timer clock */
- REG_TCU_TESR = (1 << TIMER_CHAN); /* start counting up */
-
- lastdec = 0;
- timestamp = 0;
-
- return 0;
-}
-
-void reset_timer(void)
-{
- reset_timer_masked ();
-}
-
-ulong get_timer(ulong base)
-{
- return get_timer_masked () - base;
-}
-
-void set_timer(ulong t)
-{
- timestamp = t;
-}
-
-void udelay (unsigned long usec)
-{
- ulong tmo,tmp;
-
- /* normalize */
- if (usec >= 1000) {
- tmo = usec / 1000;
- tmo *= TIMER_HZ;
- tmo /= 1000;
- }
- else {
- if (usec >= 1) {
- tmo = usec * TIMER_HZ;
- tmo /= (1000*1000);
- }
- else
- tmo = 1;
- }
-
- /* check for rollover during this delay */
- tmp = get_timer (0);
- if ((tmp + tmo) < tmp )
- reset_timer_masked(); /* timer would roll over */
- else
- tmo += tmp;
-
- while (get_timer_masked () < tmo);
-}
-
-void reset_timer_masked (void)
-{
- /* reset time */
- lastdec = READ_TIMER;
- timestamp = 0;
-}
-
-ulong get_timer_masked (void)
-{
- ulong now = READ_TIMER;
-
- if (lastdec <= now) {
- /* normal mode */
- timestamp += (now - lastdec);
- } else {
- /* we have an overflow ... */
- timestamp += TIMER_FDATA + now - lastdec;
- }
- lastdec = now;
-
- return timestamp;
-}
-
-void udelay_masked (unsigned long usec)
-{
- ulong tmo;
- ulong endtime;
- signed long diff;
-
- /* normalize */
- if (usec >= 1000) {
- tmo = usec / 1000;
- tmo *= TIMER_HZ;
- tmo /= 1000;
- } else {
- if (usec > 1) {
- tmo = usec * TIMER_HZ;
- tmo /= (1000*1000);
- } else {
- tmo = 1;
- }
- }
-
- endtime = get_timer_masked () + tmo;
-
- do {
- ulong now = get_timer_masked ();
- diff = endtime - now;
- } while (diff >= 0);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On MIPS it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
- return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On MIPS it returns the number of timer ticks per second.
- */
-ulong get_tbclk (void)
-{
- return TIMER_HZ;
-}
-
-#endif /* CONFIG_NAND_SPL */
-
-/* End of timer routine. */
-
-#endif
diff --git a/package/boot/uboot-xburst/files/cpu/mips/jz4740_nand.c b/package/boot/uboot-xburst/files/cpu/mips/jz4740_nand.c
deleted file mode 100644
index 7877194..0000000
--- a/package/boot/uboot-xburst/files/cpu/mips/jz4740_nand.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * Platform independend driver for JZ4740.
- *
- * Copyright (c) 2007 Ingenic Semiconductor Inc.
- * Author: <jlwei@ingenic.cn>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-#include <common.h>
-
-#if defined(CONFIG_CMD_NAND) && defined(CONFIG_JZ4740)
-
-#include <nand.h>
-#include <asm/jz4740.h>
-#include <asm/io.h>
-
-#define PAR_SIZE 9
-#define __nand_ecc_enable() (REG_EMC_NFECR = EMC_NFECR_ECCE | EMC_NFECR_ERST )
-#define __nand_ecc_disable() (REG_EMC_NFECR &= ~EMC_NFECR_ECCE)
-
-#define __nand_select_rs_ecc() (REG_EMC_NFECR |= EMC_NFECR_RS)
-
-#define __nand_rs_ecc_encoding() (REG_EMC_NFECR |= EMC_NFECR_RS_ENCODING)
-#define __nand_rs_ecc_decoding() (REG_EMC_NFECR |= EMC_NFECR_RS_DECODING)
-#define __nand_ecc_encode_sync() while (!(REG_EMC_NFINTS & EMC_NFINTS_ENCF))
-#define __nand_ecc_decode_sync() while (!(REG_EMC_NFINTS & EMC_NFINTS_DECF))
-
-static void jz_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- struct nand_chip *this = mtd->priv;
- unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
-
- if (ctrl & NAND_CTRL_CHANGE) {
- /* Change this to use I/O accessors. */
- if (ctrl & NAND_NCE)
- REG_EMC_NFCSR |= EMC_NFCSR_NFCE1;
- else
- REG_EMC_NFCSR &= ~EMC_NFCSR_NFCE1;
- }
-
- if (cmd == NAND_CMD_NONE)
- return;
-
- if (ctrl & NAND_CLE)
- nandaddr |= 0x00008000;
- else /* must be ALE */
- nandaddr |= 0x00010000;
-
- writeb(cmd, (uint8_t *)nandaddr);
-}
-
-static int jz_device_ready(struct mtd_info *mtd)
-{
- int ready;
- udelay(20); /* FIXME: add 20us delay */
- ready = (REG_GPIO_PXPIN(2) & 0x40000000) ? 1 : 0;
- return ready;
-}
-
-/*
- * EMC setup
- */
-static void jz_device_setup(void)
-{
- /* Set NFE bit */
- REG_EMC_NFCSR |= EMC_NFCSR_NFE1;
- REG_EMC_SMCR1 = 0x094c4400;
- /* REG_EMC_SMCR3 = 0x04444400; */
-}
-
-void board_nand_select_device(struct nand_chip *nand, int chip)
-{
- /*
- * Don't use "chip" to address the NAND device,
- * generate the cs from the address where it is encoded.
- */
-}
-
-static int jzsoc_nand_calculate_rs_ecc(struct mtd_info* mtd, const u_char* dat,
- u_char* ecc_code)
-{
- volatile u8 *paraddr = (volatile u8 *)EMC_NFPAR0;
- short i;
-
- __nand_ecc_encode_sync()
- __nand_ecc_disable();
-
- for(i = 0; i < PAR_SIZE; i++)
- ecc_code[i] = *paraddr++;
-
- return 0;
-}
-
-static void jzsoc_nand_enable_rs_hwecc(struct mtd_info* mtd, int mode)
-{
- __nand_ecc_enable();
- __nand_select_rs_ecc();
-
- REG_EMC_NFINTS = 0x0;
- if (NAND_ECC_READ == mode){
- __nand_rs_ecc_decoding();
- }
- if (NAND_ECC_WRITE == mode){
- __nand_rs_ecc_encoding();
- }
-}
-
-/* Correct 1~9-bit errors in 512-bytes data */
-static void jzsoc_rs_correct(unsigned char *dat, int idx, int mask)
-{
- int i;
-
- idx--;
-
- i = idx + (idx >> 3);
- if (i >= 512)
- return;
-
- mask <<= (idx & 0x7);
-
- dat[i] ^= mask & 0xff;
- if (i < 511)
- dat[i+1] ^= (mask >> 8) & 0xff;
-}
-
-static int jzsoc_nand_rs_correct_data(struct mtd_info *mtd, u_char *dat,
- u_char *read_ecc, u_char *calc_ecc)
-{
- volatile u8 *paraddr = (volatile u8 *)EMC_NFPAR0;
- short k;
- u32 stat;
- /* Set PAR values */
-
- for (k = 0; k < PAR_SIZE; k++) {
- *paraddr++ = read_ecc[k];
- }
-
- /* Set PRDY */
- REG_EMC_NFECR |= EMC_NFECR_PRDY;
-
- /* Wait for completion */
- __nand_ecc_decode_sync();
- __nand_ecc_disable();
-
- /* Check decoding */
- stat = REG_EMC_NFINTS;
- if (stat & EMC_NFINTS_ERR) {
- if (stat & EMC_NFINTS_UNCOR) {
- printk("Uncorrectable error occurred\n");
- return -1;
- }
- else {
- u32 errcnt = (stat & EMC_NFINTS_ERRCNT_MASK) >> EMC_NFINTS_ERRCNT_BIT;
- switch (errcnt) {
- case 4:
- jzsoc_rs_correct(dat, (REG_EMC_NFERR3 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT, (REG_EMC_NFERR3 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT);
- case 3:
- jzsoc_rs_correct(dat, (REG_EMC_NFERR2 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT, (REG_EMC_NFERR2 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT);
- case 2:
- jzsoc_rs_correct(dat, (REG_EMC_NFERR1 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT, (REG_EMC_NFERR1 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT);
- case 1:
- jzsoc_rs_correct(dat, (REG_EMC_NFERR0 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT, (REG_EMC_NFERR0 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT);
- return 0;
- default:
- break;
- }
- }
- }
- /* no error need to be correct */
- return 0;
-}
-
-/*
- * Main initialization routine
- */
-int board_nand_init(struct nand_chip *nand)
-{
- jz_device_setup();
-
- nand->cmd_ctrl = jz_hwcontrol;
- nand->dev_ready = jz_device_ready;
-
- /* FIXME: should use NAND_ECC_SOFT */
- nand->ecc.hwctl = jzsoc_nand_enable_rs_hwecc;
- nand->ecc.correct = jzsoc_nand_rs_correct_data;
- nand->ecc.calculate = jzsoc_nand_calculate_rs_ecc;
- nand->ecc.mode = NAND_ECC_HW;
- nand->ecc.size = 512;
- nand->ecc.bytes = 9;
-
- /* 20 us command delay time */
- nand->chip_delay = 20;
-
- return 0;
-}
-#endif /* (CONFIG_SYS_CMD_NAND) */
diff --git a/package/boot/uboot-xburst/files/cpu/mips/jz_lcd.c b/package/boot/uboot-xburst/files/cpu/mips/jz_lcd.c
deleted file mode 100644
index 927b82a..0000000
--- a/package/boot/uboot-xburst/files/cpu/mips/jz_lcd.c
+++ /dev/null
@@ -1,484 +0,0 @@
-/*
- * JzRISC lcd controller
- *
- * xiangfu liu <xiangfu.z@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Fallowing macro may be used:
- * CONFIG_LCD : LCD support
- * LCD_BPP : Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8
- * CONFIG_LCD_LOGO : show logo
- */
-
-#include <config.h>
-#include <common.h>
-#include <lcd.h>
-
-#include <asm/io.h> /* virt_to_phys() */
-
-#if defined(CONFIG_LCD) && !defined(CONFIG_SLCD)
-
-#if defined(CONFIG_JZ4740)
-#include <asm/jz4740.h>
-#endif
-
-#include "jz_lcd.h"
-
-
-struct jzfb_info {
- unsigned int cfg; /* panel mode and pin usage etc. */
- unsigned int w;
- unsigned int h;
- unsigned int bpp; /* bit per pixel */
- unsigned int fclk; /* frame clk */
- unsigned int hsw; /* hsync width, in pclk */
- unsigned int vsw; /* vsync width, in line count */
- unsigned int elw; /* end of line, in pclk */
- unsigned int blw; /* begin of line, in pclk */
- unsigned int efw; /* end of frame, in line count */
- unsigned int bfw; /* begin of frame, in line count */
-};
-
-static struct jzfb_info jzfb = {
- #if defined(CONFIG_NANONOTE)
- MODE_8BIT_SERIAL_TFT | PCLK_N | HSYNC_N | VSYNC_N,
- 320, 240, 32, 70, 1, 1, 273, 140, 1, 20
- #endif
-
-};
-
-/************************************************************************/
-
-vidinfo_t panel_info = {
-#if defined(CONFIG_JZLCD_FOXCONN_PT035TN01)
- 320, 240, LCD_BPP,
-#endif
-};
-
-/*----------------------------------------------------------------------*/
-
-int lcd_line_length;
-
-int lcd_color_fg;
-int lcd_color_bg;
-
-/*
- * Frame buffer memory information
- */
-void *lcd_base; /* Start of framebuffer memory */
-void *lcd_console_address; /* Start of console buffer */
-
-short console_col;
-short console_row;
-
-/*----------------------------------------------------------------------*/
-
-void lcd_ctrl_init (void *lcdbase);
-
-void lcd_enable (void);
-void lcd_disable (void);
-
-/*----------------------------------------------------------------------*/
-
-static int jz_lcd_init_mem(void *lcdbase, vidinfo_t *vid);
-static void jz_lcd_desc_init(vidinfo_t *vid);
-static int jz_lcd_hw_init( vidinfo_t *vid );
-extern int flush_cache_all(void);
-
-#if LCD_BPP == LCD_COLOR8
-void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue);
-#endif
-#if LCD_BPP == LCD_MONOCHROME
-void lcd_initcolregs (void);
-#endif
-
-/*-----------------------------------------------------------------------*/
-
-void lcd_ctrl_init (void *lcdbase)
-{
- __lcd_display_pin_init();
-
- jz_lcd_init_mem(lcdbase, &panel_info);
- jz_lcd_desc_init(&panel_info);
- jz_lcd_hw_init(&panel_info);
-
- __lcd_display_on() ;
-}
-
-/*----------------------------------------------------------------------*/
-#if LCD_BPP == LCD_COLOR8
-void
-lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue)
-{
-}
-#endif
-/*----------------------------------------------------------------------*/
-
-#if LCD_BPP == LCD_MONOCHROME
-static
-void lcd_initcolregs (void)
-{
-}
-#endif
-
-/*
- * Before enabled lcd controller, lcd registers should be configured correctly.
- */
-
-void lcd_enable (void)
-{
- REG_LCD_CTRL &= ~(1<<4); /* LCDCTRL.DIS */
- REG_LCD_CTRL |= 1<<3; /* LCDCTRL.ENA*/
-}
-
-void lcd_disable (void)
-{
- REG_LCD_CTRL |= (1<<4); /* LCDCTRL.DIS, regular disable */
- /* REG_LCD_CTRL |= (1<<3); */ /* LCDCTRL.DIS, quikly disable */
-}
-
-static int jz_lcd_init_mem(void *lcdbase, vidinfo_t *vid)
-{
- u_long palette_mem_size;
- struct jz_fb_info *fbi = &vid->jz_fb;
- int fb_size = vid->vl_row * (vid->vl_col * NBITS (vid->vl_bpix)) / 8;
-
- fbi->screen = (u_long)lcdbase;
- fbi->palette_size = 256;
- palette_mem_size = fbi->palette_size * sizeof(u16);
-
- debug("jz_lcd.c palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
- /* locate palette and descs at end of page following fb */
- fbi->palette = (u_long)lcdbase + fb_size + PAGE_SIZE - palette_mem_size;
-
- return 0;
-}
-
-static void jz_lcd_desc_init(vidinfo_t *vid)
-{
- struct jz_fb_info * fbi;
- fbi = &vid->jz_fb;
- fbi->dmadesc_fblow = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 3*16);
- fbi->dmadesc_fbhigh = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 2*16);
- fbi->dmadesc_palette = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 1*16);
-
- #define BYTES_PER_PANEL (vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8)
-
- /* populate descriptors */
- fbi->dmadesc_fblow->fdadr = virt_to_phys(fbi->dmadesc_fblow);
- fbi->dmadesc_fblow->fsadr = virt_to_phys((void *)(fbi->screen + BYTES_PER_PANEL));
- fbi->dmadesc_fblow->fidr = 0;
- fbi->dmadesc_fblow->ldcmd = BYTES_PER_PANEL / 4 ;
-
- fbi->fdadr1 = virt_to_phys(fbi->dmadesc_fblow); /* only used in dual-panel mode */
-
- fbi->dmadesc_fbhigh->fsadr = virt_to_phys((void *)fbi->screen);
- fbi->dmadesc_fbhigh->fidr = 0;
- fbi->dmadesc_fbhigh->ldcmd = BYTES_PER_PANEL / 4; /* length in word */
-
- fbi->dmadesc_palette->fsadr = virt_to_phys((void *)fbi->palette);
- fbi->dmadesc_palette->fidr = 0;
- fbi->dmadesc_palette->ldcmd = (fbi->palette_size * 2)/4 | (1<<28);
-
- if( NBITS(vid->vl_bpix) < 12)
- {
- /* assume any mode with <12 bpp is palette driven */
- fbi->dmadesc_palette->fdadr = virt_to_phys(fbi->dmadesc_fbhigh);
- fbi->dmadesc_fbhigh->fdadr = virt_to_phys(fbi->dmadesc_palette);
- /* flips back and forth between pal and fbhigh */
- fbi->fdadr0 = virt_to_phys(fbi->dmadesc_palette);
- } else {
- /* palette shouldn't be loaded in true-color mode */
- fbi->dmadesc_fbhigh->fdadr = virt_to_phys((void *)fbi->dmadesc_fbhigh);
- fbi->fdadr0 = virt_to_phys(fbi->dmadesc_fbhigh); /* no pal just fbhigh */
- }
-
- flush_cache_all();
-}
-
-static int jz_lcd_hw_init(vidinfo_t *vid)
-{
- struct jz_fb_info *fbi = &vid->jz_fb;
- unsigned int val = 0;
- unsigned int pclk;
- unsigned int stnH;
-#if defined(CONFIG_MIPS_JZ4740)
- int pll_div;
-#endif
-
- /* Setting Control register */
- switch (jzfb.bpp) {
- case 1:
- val |= LCD_CTRL_BPP_1;
- break;
- case 2:
- val |= LCD_CTRL_BPP_2;
- break;
- case 4:
- val |= LCD_CTRL_BPP_4;
- break;
- case 8:
- val |= LCD_CTRL_BPP_8;
- break;
- case 15:
- val |= LCD_CTRL_RGB555;
- case 16:
- val |= LCD_CTRL_BPP_16;
- break;
-#if defined(CONFIG_MIPS_JZ4740)
- case 17 ... 32:
- val |= LCD_CTRL_BPP_18_24; /* target is 4bytes/pixel */
- break;
-#endif
- default:
- printf("jz_lcd.c The BPP %d is not supported\n", jzfb.bpp);
- val |= LCD_CTRL_BPP_16;
- break;
- }
-
- switch (jzfb.cfg & MODE_MASK) {
- case MODE_STN_MONO_DUAL:
- case MODE_STN_COLOR_DUAL:
- case MODE_STN_MONO_SINGLE:
- case MODE_STN_COLOR_SINGLE:
- switch (jzfb.bpp) {
- case 1:
- /* val |= LCD_CTRL_PEDN; */
- case 2:
- val |= LCD_CTRL_FRC_2;
- break;
- case 4:
- val |= LCD_CTRL_FRC_4;
- break;
- case 8:
- default:
- val |= LCD_CTRL_FRC_16;
- break;
- }
- break;
- }
-
- val |= LCD_CTRL_BST_16; /* Burst Length is 16WORD=64Byte */
- val |= LCD_CTRL_OFUP; /* OutFIFO underrun protect */
-
- switch (jzfb.cfg & MODE_MASK) {
- case MODE_STN_MONO_DUAL:
- case MODE_STN_COLOR_DUAL:
- case MODE_STN_MONO_SINGLE:
- case MODE_STN_COLOR_SINGLE:
- switch (jzfb.cfg & STN_DAT_PINMASK) {
-#define align2(n) (n)=((((n)+1)>>1)<<1)
-#define align4(n) (n)=((((n)+3)>>2)<<2)
-#define align8(n) (n)=((((n)+7)>>3)<<3)
- case STN_DAT_PIN1:
- /* Do not adjust the hori-param value. */
- break;
- case STN_DAT_PIN2:
- align2(jzfb.hsw);
- align2(jzfb.elw);
- align2(jzfb.blw);
- break;
- case STN_DAT_PIN4:
- align4(jzfb.hsw);
- align4(jzfb.elw);
- align4(jzfb.blw);
- break;
- case STN_DAT_PIN8:
- align8(jzfb.hsw);
- align8(jzfb.elw);
- align8(jzfb.blw);
- break;
- }
- break;
- }
-
- REG_LCD_CTRL = val;
-
- switch (jzfb.cfg & MODE_MASK) {
- case MODE_STN_MONO_DUAL:
- case MODE_STN_COLOR_DUAL:
- case MODE_STN_MONO_SINGLE:
- case MODE_STN_COLOR_SINGLE:
- if (((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL) ||
- ((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL))
- stnH = jzfb.h >> 1;
- else
- stnH = jzfb.h;
-
- REG_LCD_VSYNC = (0 << 16) | jzfb.vsw;
- REG_LCD_HSYNC = ((jzfb.blw+jzfb.w) << 16) | (jzfb.blw+jzfb.w+jzfb.hsw);
-
- /* Screen setting */
- REG_LCD_VAT = ((jzfb.blw + jzfb.w + jzfb.hsw + jzfb.elw) << 16) | (stnH + jzfb.vsw + jzfb.bfw + jzfb.efw);
- REG_LCD_DAH = (jzfb.blw << 16) | (jzfb.blw + jzfb.w);
- REG_LCD_DAV = (0 << 16) | (stnH);
-
- /* AC BIAs signal */
- REG_LCD_PS = (0 << 16) | (stnH+jzfb.vsw+jzfb.efw+jzfb.bfw);
-
- break;
-
- case MODE_TFT_GEN:
- case MODE_TFT_SHARP:
- case MODE_TFT_CASIO:
- case MODE_TFT_SAMSUNG:
- case MODE_8BIT_SERIAL_TFT:
- case MODE_TFT_18BIT:
- REG_LCD_VSYNC = (0 << 16) | jzfb.vsw;
- REG_LCD_HSYNC = (0 << 16) | jzfb.hsw;
-#if defined(CONFIG_JZLCD_INNOLUX_AT080TN42)
- REG_LCD_DAV = (0 << 16) | ( jzfb.h );
-#else
- REG_LCD_DAV =((jzfb.vsw+jzfb.bfw) << 16) | (jzfb.vsw +jzfb.bfw+jzfb.h);
-#endif /*#if defined(CONFIG_JZLCD_INNOLUX_AT080TN42)*/
- REG_LCD_DAH = ((jzfb.hsw + jzfb.blw) << 16) | (jzfb.hsw + jzfb.blw + jzfb.w );
- REG_LCD_VAT = (((jzfb.blw + jzfb.w + jzfb.elw + jzfb.hsw)) << 16) \
- | (jzfb.vsw + jzfb.bfw + jzfb.h + jzfb.efw);
- break;
- }
-
- switch (jzfb.cfg & MODE_MASK) {
- case MODE_TFT_SAMSUNG:
- {
- unsigned int total, tp_s, tp_e, ckv_s, ckv_e;
- unsigned int rev_s, rev_e, inv_s, inv_e;
-
- pclk = val * (jzfb.w + jzfb.hsw + jzfb.elw + jzfb.blw) *
- (jzfb.h + jzfb.vsw + jzfb.efw + jzfb.bfw); /* Pixclk */
-
- total = jzfb.blw + jzfb.w + jzfb.elw + jzfb.hsw;
- tp_s = jzfb.blw + jzfb.w + 1;
- tp_e = tp_s + 1;
- /* ckv_s = tp_s - jz_clocks.pixclk/(1000000000/4100); */
- ckv_s = tp_s - pclk/(1000000000/4100);
- ckv_e = tp_s + total;
- rev_s = tp_s - 11; /* -11.5 clk */
- rev_e = rev_s + total;
- inv_s = tp_s;
- inv_e = inv_s + total;
- REG_LCD_CLS = (tp_s << 16) | tp_e;
- REG_LCD_PS = (ckv_s << 16) | ckv_e;
- REG_LCD_SPL = (rev_s << 16) | rev_e;
- REG_LCD_REV = (inv_s << 16) | inv_e;
- jzfb.cfg |= STFT_REVHI | STFT_SPLHI;
- break;
- }
- case MODE_TFT_SHARP:
- {
- unsigned int total, cls_s, cls_e, ps_s, ps_e;
- unsigned int spl_s, spl_e, rev_s, rev_e;
- total = jzfb.blw + jzfb.w + jzfb.elw + jzfb.hsw;
-#if !defined(CONFIG_JZLCD_INNOLUX_AT080TN42)
- spl_s = 1;
- spl_e = spl_s + 1;
- cls_s = 0;
- cls_e = total - 60; /* > 4us (pclk = 80ns) */
- ps_s = cls_s;
- ps_e = cls_e;
- rev_s = total - 40; /* > 3us (pclk = 80ns) */
- rev_e = rev_s + total;
- jzfb.cfg |= STFT_PSHI;
-#else /*#if defined(CONFIG_JZLCD_INNOLUX_AT080TN42)*/
- spl_s = total - 5; /* LD */
- spl_e = total -3;
- cls_s = 32; /* CKV */
- cls_e = 145;
- ps_s = 0; /* OEV */
- ps_e = 45;
- rev_s = 0; /* POL */
- rev_e = 0;
-#endif /*#if defined(CONFIG_JZLCD_INNOLUX_AT080TN42)*/
- REG_LCD_SPL = (spl_s << 16) | spl_e;
- REG_LCD_CLS = (cls_s << 16) | cls_e;
- REG_LCD_PS = (ps_s << 16) | ps_e;
- REG_LCD_REV = (rev_s << 16) | rev_e;
- break;
- }
- case MODE_TFT_CASIO:
- break;
- }
-
- /* Configure the LCD panel */
- REG_LCD_CFG = jzfb.cfg;
-
- /* Timing setting */
- __cpm_stop_lcd();
-
- val = jzfb.fclk; /* frame clk */
- if ( (jzfb.cfg & MODE_MASK) != MODE_8BIT_SERIAL_TFT) {
- pclk = val * (jzfb.w + jzfb.hsw + jzfb.elw + jzfb.blw) *
- (jzfb.h + jzfb.vsw + jzfb.efw + jzfb.bfw); /* Pixclk */
- }
- else {
- /* serial mode: Hsync period = 3*Width_Pixel */
- pclk = val * (jzfb.w*3 + jzfb.hsw + jzfb.elw + jzfb.blw) *
- (jzfb.h + jzfb.vsw + jzfb.efw + jzfb.bfw); /* Pixclk */
- }
-
- if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_SINGLE) ||
- ((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL))
- pclk = (pclk * 3);
-
- if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_SINGLE) ||
- ((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL) ||
- ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_SINGLE) ||
- ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL))
- pclk = pclk >> ((jzfb.cfg & STN_DAT_PINMASK) >> 4);
-
- if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL) ||
- ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL))
- pclk >>= 1;
-
- pll_div = ( REG_CPM_CPCCR & CPM_CPCCR_PCS ); /* clock source,0:pllout/2 1: pllout */
- pll_div = pll_div ? 1 : 2 ;
- val = ( __cpm_get_pllout()/pll_div ) / pclk;
- val--;
- if ( val > 0x1ff ) {
- printf("CPM_LPCDR too large, set it to 0x1ff\n");
- val = 0x1ff;
- }
- __cpm_set_pixdiv(val);
-
- val = pclk * 3 ; /* LCDClock > 2.5*Pixclock */
- if ( val > 150000000 ) {
- printf("Warning: LCDClock=%d\n, LCDClock must less or equal to 150MHz.\n", val);
- printf("Change LCDClock to 150MHz\n");
- val = 150000000;
- }
- val = ( __cpm_get_pllout()/pll_div ) / val;
- val--;
- if ( val > 0x1f ) {
- printf("CPM_CPCCR.LDIV too large, set it to 0x1f\n");
- val = 0x1f;
- }
- __cpm_set_ldiv( val );
- REG_CPM_CPCCR |= CPM_CPCCR_CE ; /* update divide */
-
- __cpm_start_lcd();
- udelay(1000);
-
- REG_LCD_DA0 = fbi->fdadr0; /* frame descripter*/
-
- if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL) ||
- ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL))
- REG_LCD_DA1 = fbi->fdadr1; /* frame descripter*/
-
- return 0;
-}
-
diff --git a/package/boot/uboot-xburst/files/cpu/mips/jz_lcd.h b/package/boot/uboot-xburst/files/cpu/mips/jz_lcd.h
deleted file mode 100644
index dfd63e0..0000000
--- a/package/boot/uboot-xburst/files/cpu/mips/jz_lcd.h
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * JzRISC lcd controller
- *
- * xiangfu liu <xiangfu.z@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __JZLCD_H__
-#define __JZLCD_H__
-
-#include <asm/io.h>
-/*
- * change u-boot macro to celinux macro
- */
-/* Chip type */
-#if defined(CONFIG_JZ4740)
-#define CONFIG_MIPS_JZ4740 1
-#endif
-
-/* board type */
-#if defined(CONFIG_NANONOTE)
-#define CONFIG_MIPS_JZ4740_PI 1
-#endif
-
-#define mdelay(n) udelay((n)*1000)
-
-/*
- * change u-boot macro to celinux macro
- */
-
-#define NR_PALETTE 256
-
-struct lcd_desc{
- unsigned int next_desc; /* LCDDAx */
- unsigned int databuf; /* LCDSAx */
- unsigned int frame_id; /* LCDFIDx */
- unsigned int cmd; /* LCDCMDx */
-};
-
-#define MODE_MASK 0x0f
-#define MODE_TFT_GEN 0x00
-#define MODE_TFT_SHARP 0x01
-#define MODE_TFT_CASIO 0x02
-#define MODE_TFT_SAMSUNG 0x03
-#define MODE_CCIR656_NONINT 0x04
-#define MODE_CCIR656_INT 0x05
-#define MODE_STN_COLOR_SINGLE 0x08
-#define MODE_STN_MONO_SINGLE 0x09
-#define MODE_STN_COLOR_DUAL 0x0a
-#define MODE_STN_MONO_DUAL 0x0b
-#define MODE_8BIT_SERIAL_TFT 0x0c
-
-#define MODE_TFT_18BIT (1<<7)
-
-#define STN_DAT_PIN1 (0x00 << 4)
-#define STN_DAT_PIN2 (0x01 << 4)
-#define STN_DAT_PIN4 (0x02 << 4)
-#define STN_DAT_PIN8 (0x03 << 4)
-#define STN_DAT_PINMASK STN_DAT_PIN8
-
-#define STFT_PSHI (1 << 15)
-#define STFT_CLSHI (1 << 14)
-#define STFT_SPLHI (1 << 13)
-#define STFT_REVHI (1 << 12)
-
-#define SYNC_MASTER (0 << 16)
-#define SYNC_SLAVE (1 << 16)
-
-#define DE_P (0 << 9)
-#define DE_N (1 << 9)
-
-#define PCLK_P (0 << 10)
-#define PCLK_N (1 << 10)
-
-#define HSYNC_P (0 << 11)
-#define HSYNC_N (1 << 11)
-
-#define VSYNC_P (0 << 8)
-#define VSYNC_N (1 << 8)
-
-#define DATA_NORMAL (0 << 17)
-#define DATA_INVERSE (1 << 17)
-
-
-/* Jz LCDFB supported I/O controls. */
-#define FBIOSETBACKLIGHT 0x4688
-#define FBIODISPON 0x4689
-#define FBIODISPOFF 0x468a
-#define FBIORESET 0x468b
-#define FBIOPRINT_REG 0x468c
-
-/*
- * LCD panel specific definition
- */
-
-#if defined(CONFIG_JZLCD_FOXCONN_PT035TN01) || defined(CONFIG_JZLCD_INNOLUX_PT035TN01_SERIAL)
-
-#if defined(CONFIG_JZLCD_FOXCONN_PT035TN01) /* board pmp */
-#define MODE 0xcd /* 24bit parellel RGB */
-#endif
-#if defined(CONFIG_JZLCD_INNOLUX_PT035TN01_SERIAL)
-#define MODE 0xc9 /* 8bit serial RGB */
-#endif
-
-#if defined(CONFIG_MIPS_JZ4740_PI) /* board pavo */
- #define SPEN (32*2+21) /*LCD_SPL */
- #define SPCK (32*2+23) /*LCD_CLS */
- #define SPDA (32*2+22) /*LCD_D12 */
- #define LCD_RET (32*3+27)
-#else
-#error "cpu/misp/Jzlcd.h, please define SPI pins on your board."
-#endif
-
- #define __spi_write_reg1(reg, val) \
- do { \
- unsigned char no;\
- unsigned short value;\
- unsigned char a=0;\
- unsigned char b=0;\
- a=reg;\
- b=val;\
- __gpio_set_pin(SPEN);\
- __gpio_set_pin(SPCK);\
- __gpio_clear_pin(SPDA);\
- __gpio_clear_pin(SPEN);\
- udelay(25);\
- value=((a<<8)|(b&0xFF));\
- for(no=0;no<16;no++)\
- {\
- __gpio_clear_pin(SPCK);\
- if((value&0x8000)==0x8000)\
- __gpio_set_pin(SPDA);\
- else\
- __gpio_clear_pin(SPDA);\
- udelay(25);\
- __gpio_set_pin(SPCK);\
- value=(value<<1); \
- udelay(25);\
- }\
- __gpio_set_pin(SPEN);\
- udelay(100);\
- } while (0)
-
- #define __spi_write_reg(reg, val) \
- do {\
- __spi_write_reg1((reg<<2|2), val);\
- udelay(100); \
- }while(0)
-
-
- #define __lcd_special_pin_init() \
- do { \
- __gpio_as_output(SPEN); /* use SPDA */\
- __gpio_as_output(SPCK); /* use SPCK */\
- __gpio_as_output(SPDA); /* use SPDA */\
- __gpio_as_output(LCD_RET);\
- } while (0)
-
-#if defined(CONFIG_NANONOTE)
- #define __lcd_special_on() \
- do { \
- udelay(50);\
- __spi_write_reg1(0x05, 0x16); \
- __spi_write_reg1(0x04, 0x0b); \
- __spi_write_reg1(0x07, 0x8d); \
- __spi_write_reg1(0x01, 0x95); \
- __spi_write_reg1(0x08, 0xc0); \
- __spi_write_reg1(0x03, 0x40); \
- __spi_write_reg1(0x06, 0x15); \
- __spi_write_reg1(0x05, 0xd7); \
- } while (0) /* reg 0x0a is control the display direction:DB0->horizontal level DB1->vertical level */
-
- #define __lcd_special_off() \
- do { \
- __spi_write_reg1(0x05, 0x5e); \
- } while (0)
-#endif /* CONFIG_NANONOTE */
-#endif /* CONFIG_JZLCD_FOXCONN_PT035TN01 or CONFIG_JZLCD_INNOLUX_PT035TN01_SERIAL */
-
-#ifndef __lcd_special_pin_init
-#define __lcd_special_pin_init()
-#endif
-#ifndef __lcd_special_on
-#define __lcd_special_on()
-#endif
-#ifndef __lcd_special_off
-#define __lcd_special_off()
-#endif
-
-
-/*
- * Platform specific definition
- */
-
-#if defined(CONFIG_MIPS_JZ4740_PI)
-
- /* 100 level: 0,1,...,100 */
- #define __lcd_set_backlight_level(n)\
- do { \
- __gpio_as_output(32*3+27); \
- __gpio_set_pin(32*3+27); \
- } while (0)
-
- #define __lcd_close_backlight() \
- do { \
- __gpio_as_output(GPIO_PWM); \
- __gpio_clear_pin(GPIO_PWM); \
- } while (0)
-
- #define __lcd_display_pin_init() \
- do { \
- __gpio_as_output(GPIO_DISP_OFF_N); \
- __cpm_start_tcu(); \
- __lcd_special_pin_init(); \
- } while (0)
- /* __lcd_set_backlight_level(100); \*/
- #define __lcd_display_on() \
- do { \
- __gpio_set_pin(GPIO_DISP_OFF_N); \
- __lcd_special_on(); \
- } while (0)
-
- #define __lcd_display_off() \
- do { \
- __lcd_special_off(); \
- __gpio_clear_pin(GPIO_DISP_OFF_N); \
- } while (0)
-
-#endif /* CONFIG_MIPS_JZ4740_PI) */
-
-/*****************************************************************************
- * LCD display pin dummy macros
- *****************************************************************************/
-#ifndef __lcd_display_pin_init
-#define __lcd_display_pin_init()
-#endif
-#ifndef __lcd_display_on
-#define __lcd_display_on()
-#endif
-#ifndef __lcd_display_off
-#define __lcd_display_off()
-#endif
-#ifndef __lcd_set_backlight_level
-#define __lcd_set_backlight_level(n)
-#endif
-
diff --git a/package/boot/uboot-xburst/files/cpu/mips/jz_mmc.c b/package/boot/uboot-xburst/files/cpu/mips/jz_mmc.c
deleted file mode 100644
index b3c4e99..0000000
--- a/package/boot/uboot-xburst/files/cpu/mips/jz_mmc.c
+++ /dev/null
@@ -1,1416 +0,0 @@
-/*
- * (C) Copyright 2003
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <part.h>
-
-#if defined CONFIG_JZ4740
-#include <asm-mips/jz4740.h>
-
-#include "jz_mmc.h"
-
-#define CFG_MMC_BASE 0x80600000
-static int sd2_0 = 0;
-
-/*
- * GPIO definition
- */
-#if defined(CONFIG_SAKC)
-
-#define __msc_init_io() \
-do { \
- __gpio_as_input(GPIO_SD_CD_N); \
-} while (0)
-
-#else
-#define __msc_init_io() \
-do { \
- __gpio_as_output(GPIO_SD_VCC_EN_N); \
- __gpio_as_input(GPIO_SD_CD_N); \
-} while (0)
-
-#define __msc_enable_power() \
-do { \
- __gpio_clear_pin(GPIO_SD_VCC_EN_N); \
-} while (0)
-
-#define __msc_disable_power() \
-do { \
- __gpio_set_pin(GPIO_SD_VCC_EN_N); \
-} while (0)
-
-#endif /* CONFIG_SAKE */
-
-#define __msc_card_detected() \
-({ \
- int detected = 1; \
- __gpio_as_input(GPIO_SD_CD_N); \
- __gpio_disable_pull(GPIO_SD_CD_N); \
- if (!__gpio_get_pin(GPIO_SD_CD_N)) \
- detected = 0; \
- detected; \
-})
-
-/*
- * Local functions
- */
-
-#ifdef CONFIG_MMC
-extern int
-fat_register_device(block_dev_desc_t *dev_desc, int part_no);
-
-static block_dev_desc_t mmc_dev;
-
-block_dev_desc_t * mmc_get_dev(int dev)
-{
- return ((block_dev_desc_t *)&mmc_dev);
-}
-
-/*
- * FIXME needs to read cid and csd info to determine block size
- * and other parameters
- */
-static uchar mmc_buf[MMC_BLOCK_SIZE];
-static int mmc_ready = 0;
-static mmc_csd_t mmc_csd;
-static int use_4bit; /* Use 4-bit data bus */
-/*
- * MMC Events
- */
-#define MMC_EVENT_NONE 0x00 /* No events */
-#define MMC_EVENT_RX_DATA_DONE 0x01 /* Rx data done */
-#define MMC_EVENT_TX_DATA_DONE 0x02 /* Tx data done */
-#define MMC_EVENT_PROG_DONE 0x04 /* Programming is done */
-
-
-#define MMC_IRQ_MASK() \
-do { \
- REG_MSC_IMASK = 0xffff; \
- REG_MSC_IREG = 0xffff; \
-} while (0)
-
-/* Stop the MMC clock and wait while it happens */
-static inline int jz_mmc_stop_clock(void)
-{
- int timeout = 1000;
-
- REG_MSC_STRPCL = MSC_STRPCL_CLOCK_CONTROL_STOP;
-
- while (timeout && (REG_MSC_STAT & MSC_STAT_CLK_EN)) {
- timeout--;
- if (timeout == 0) {
- return MMC_ERROR_TIMEOUT;
- }
- udelay(1);
- }
- return MMC_NO_ERROR;
-}
-
-/* Start the MMC clock and operation */
-static inline int jz_mmc_start_clock(void)
-{
- REG_MSC_STRPCL = MSC_STRPCL_CLOCK_CONTROL_START | MSC_STRPCL_START_OP;
- return MMC_NO_ERROR;
-}
-
-static inline u32 jz_mmc_calc_clkrt(int is_sd, u32 rate)
-{
- u32 clkrt;
- u32 clk_src = is_sd ? 24000000: 16000000;
-
- clkrt = 0;
- while (rate < clk_src)
- {
- clkrt ++;
- clk_src >>= 1;
- }
- return clkrt;
-}
-
-/* Set the MMC clock frequency */
-void jz_mmc_set_clock(int sd, u32 rate)
-{
- jz_mmc_stop_clock();
-
- /* Select clock source of MSC */
- __cpm_select_msc_clk(sd);
-
- /* Set clock dividor of MSC */
- REG_MSC_CLKRT = jz_mmc_calc_clkrt(sd, rate);
-}
-
-static int jz_mmc_check_status(struct mmc_request *request)
-{
- u32 status = REG_MSC_STAT;
-
- /* Checking for response or data timeout */
- if (status & (MSC_STAT_TIME_OUT_RES | MSC_STAT_TIME_OUT_READ)) {
- printf("MMC/SD timeout, MMC_STAT 0x%x CMD %d\n", status, request->cmd);
- return MMC_ERROR_TIMEOUT;
- }
-
- /* Checking for CRC error */
- if (status & (MSC_STAT_CRC_READ_ERROR | MSC_STAT_CRC_WRITE_ERROR | MSC_STAT_CRC_RES_ERR)) {
- printf("MMC/CD CRC error, MMC_STAT 0x%x\n", status);
- return MMC_ERROR_CRC;
- }
-
- return MMC_NO_ERROR;
-}
-
-/* Obtain response to the command and store it to response buffer */
-static void jz_mmc_get_response(struct mmc_request *request)
-{
- int i;
- u8 *buf;
- u32 data;
-
- DEBUG(3, "fetch response for request %d, cmd %d\n", request->rtype, request->cmd);
-
- buf = request->response;
- request->result = MMC_NO_ERROR;
-
- switch (request->rtype) {
- case RESPONSE_R1: case RESPONSE_R1B: case RESPONSE_R6:
- case RESPONSE_R3: case RESPONSE_R4: case RESPONSE_R5:
- {
- data = REG_MSC_RES;
- buf[0] = (data >> 8) & 0xff;
- buf[1] = data & 0xff;
- data = REG_MSC_RES;
- buf[2] = (data >> 8) & 0xff;
- buf[3] = data & 0xff;
- data = REG_MSC_RES;
- buf[4] = data & 0xff;
-
- DEBUG(3, "request %d, response [%02x %02x %02x %02x %02x]\n",
- request->rtype, buf[0], buf[1], buf[2], buf[3], buf[4]);
- break;
- }
- case RESPONSE_R2_CID: case RESPONSE_R2_CSD:
- {
- for (i = 0; i < 16; i += 2) {
- data = REG_MSC_RES;
- buf[i] = (data >> 8) & 0xff;
- buf[i+1] = data & 0xff;
- }
- DEBUG(3, "request %d, response [", request->rtype);
-#if CONFIG_MMC_DEBUG_VERBOSE > 2
- if (g_mmc_debug >= 3) {
- int n;
- for (n = 0; n < 17; n++)
- printk("%02x ", buf[n]);
- printk("]\n");
- }
-#endif
- break;
- }
- case RESPONSE_NONE:
- DEBUG(3, "No response\n");
- break;
-
- default:
- DEBUG(3, "unhandled response type for request %d\n", request->rtype);
- break;
- }
-}
-
-static int jz_mmc_receive_data(struct mmc_request *req)
-{
- u32 stat, timeout, data, cnt;
- u8 *buf = req->buffer;
- u32 wblocklen = (u32)(req->block_len + 3) >> 2; /* length in word */
-
- timeout = 0x3ffffff;
-
- while (timeout) {
- timeout--;
- stat = REG_MSC_STAT;
-
- if (stat & MSC_STAT_TIME_OUT_READ)
- return MMC_ERROR_TIMEOUT;
- else if (stat & MSC_STAT_CRC_READ_ERROR)
- return MMC_ERROR_CRC;
- else if (!(stat & MSC_STAT_DATA_FIFO_EMPTY)
- || (stat & MSC_STAT_DATA_FIFO_AFULL)) {
- /* Ready to read data */
- break;
- }
- udelay(1);
- }
- if (!timeout)
- return MMC_ERROR_TIMEOUT;
-
- /* Read data from RXFIFO. It could be FULL or PARTIAL FULL */
- cnt = wblocklen;
- while (cnt) {
- data = REG_MSC_RXFIFO;
- {
- *buf++ = (u8)(data >> 0);
- *buf++ = (u8)(data >> 8);
- *buf++ = (u8)(data >> 16);
- *buf++ = (u8)(data >> 24);
- }
- cnt --;
- while (cnt && (REG_MSC_STAT & MSC_STAT_DATA_FIFO_EMPTY))
- ;
- }
- return MMC_NO_ERROR;
-}
-
-static int jz_mmc_transmit_data(struct mmc_request *req)
-{
-#if 0
- u32 nob = req->nob;
- u32 wblocklen = (u32)(req->block_len + 3) >> 2; /* length in word */
- u8 *buf = req->buffer;
- u32 *wbuf = (u32 *)buf;
- u32 waligned = (((u32)buf & 0x3) == 0); /* word aligned ? */
- u32 stat, timeout, data, cnt;
-
- for (nob; nob >= 1; nob--) {
- timeout = 0x3FFFFFF;
-
- while (timeout) {
- timeout--;
- stat = REG_MSC_STAT;
-
- if (stat & (MSC_STAT_CRC_WRITE_ERROR | MSC_STAT_CRC_WRITE_ERROR_NOSTS))
- return MMC_ERROR_CRC;
- else if (!(stat & MSC_STAT_DATA_FIFO_FULL)) {
- /* Ready to write data */
- break;
- }
-
- udelay(1);
- }
-
- if (!timeout)
- return MMC_ERROR_TIMEOUT;
-
- /* Write data to TXFIFO */
- cnt = wblocklen;
- while (cnt) {
- while (REG_MSC_STAT & MSC_STAT_DATA_FIFO_FULL)
- ;
-
- if (waligned) {
- REG_MSC_TXFIFO = *wbuf++;
- }
- else {
- data = *buf++ | (*buf++ << 8) | (*buf++ << 16) | (*buf++ << 24);
- REG_MSC_TXFIFO = data;
- }
-
- cnt--;
- }
- }
-#endif
- return MMC_NO_ERROR;
-}
-
-
-/*
- * Name: int jz_mmc_exec_cmd()
- * Function: send command to the card, and get a response
- * Input: struct mmc_request *req : MMC/SD request
- * Output: 0: right >0: error code
- */
-int jz_mmc_exec_cmd(struct mmc_request *request)
-{
- u32 cmdat = 0, events = 0;
- int retval, timeout = 0x3fffff;
-
- /* Indicate we have no result yet */
- request->result = MMC_NO_RESPONSE;
- if (request->cmd == MMC_CIM_RESET) {
- /* On reset, 1-bit bus width */
- use_4bit = 0;
-
- /* Reset MMC/SD controller */
- __msc_reset();
-
- /* On reset, drop MMC clock down */
- jz_mmc_set_clock(0, MMC_CLOCK_SLOW);
-
- /* On reset, stop MMC clock */
- jz_mmc_stop_clock();
- }
- if (request->cmd == MMC_SEND_OP_COND) {
- DEBUG(3, "Have an MMC card\n");
- /* always use 1bit for MMC */
- use_4bit = 0;
- }
- if (request->cmd == SET_BUS_WIDTH) {
- if (request->arg == 0x2) {
- printf("Use 4-bit bus width\n");
- use_4bit = 1;
- }
- else {
- printf("Use 1-bit bus width\n");
- use_4bit = 0;
- }
- }
-
- /* stop clock */
- jz_mmc_stop_clock();
-
- /* mask all interrupts */
- REG_MSC_IMASK = 0xffff;
-
- /* clear status */
- REG_MSC_IREG = 0xffff;
-
- /* use 4-bit bus width when possible */
- if (use_4bit)
- cmdat |= MSC_CMDAT_BUS_WIDTH_4BIT;
-
- /* Set command type and events */
- switch (request->cmd) {
- /* MMC core extra command */
- case MMC_CIM_RESET:
- cmdat |= MSC_CMDAT_INIT; /* Initialization sequence sent prior to command */
- break;
-
- /* bc - broadcast - no response */
- case MMC_GO_IDLE_STATE:
- case MMC_SET_DSR:
- break;
-
- /* bcr - broadcast with response */
- case MMC_SEND_OP_COND:
- case MMC_ALL_SEND_CID:
- case MMC_GO_IRQ_STATE:
- break;
-
- /* adtc - addressed with data transfer */
- case MMC_READ_DAT_UNTIL_STOP:
- case MMC_READ_SINGLE_BLOCK:
- case MMC_READ_MULTIPLE_BLOCK:
- case SEND_SCR:
- cmdat |= MSC_CMDAT_DATA_EN | MSC_CMDAT_READ;
- events = MMC_EVENT_RX_DATA_DONE;
- break;
-
- case MMC_WRITE_DAT_UNTIL_STOP:
- case MMC_WRITE_BLOCK:
- case MMC_WRITE_MULTIPLE_BLOCK:
- case MMC_PROGRAM_CID:
- case MMC_PROGRAM_CSD:
- case MMC_SEND_WRITE_PROT:
- case MMC_GEN_CMD:
- case MMC_LOCK_UNLOCK:
- cmdat |= MSC_CMDAT_DATA_EN | MSC_CMDAT_WRITE;
- events = MMC_EVENT_TX_DATA_DONE | MMC_EVENT_PROG_DONE;
-
- break;
-
- case MMC_STOP_TRANSMISSION:
- events = MMC_EVENT_PROG_DONE;
- break;
-
- /* ac - no data transfer */
- default:
- break;
- }
-
- /* Set response type */
- switch (request->rtype) {
- case RESPONSE_NONE:
- break;
-
- case RESPONSE_R1B:
- cmdat |= MSC_CMDAT_BUSY;
- /*FALLTHRU*/
- case RESPONSE_R1:
- cmdat |= MSC_CMDAT_RESPONSE_R1;
- break;
- case RESPONSE_R2_CID:
- case RESPONSE_R2_CSD:
- cmdat |= MSC_CMDAT_RESPONSE_R2;
- break;
- case RESPONSE_R3:
- cmdat |= MSC_CMDAT_RESPONSE_R3;
- break;
- case RESPONSE_R4:
- cmdat |= MSC_CMDAT_RESPONSE_R4;
- break;
- case RESPONSE_R5:
- cmdat |= MSC_CMDAT_RESPONSE_R5;
- break;
- case RESPONSE_R6:
- cmdat |= MSC_CMDAT_RESPONSE_R6;
- break;
- default:
- break;
- }
-
- /* Set command index */
- if (request->cmd == MMC_CIM_RESET) {
- REG_MSC_CMD = MMC_GO_IDLE_STATE;
- } else {
- REG_MSC_CMD = request->cmd;
- }
-
- /* Set argument */
- REG_MSC_ARG = request->arg;
-
- /* Set block length and nob */
- if (request->cmd == SEND_SCR) { /* get SCR from DataFIFO */
- REG_MSC_BLKLEN = 8;
- REG_MSC_NOB = 1;
- } else {
- REG_MSC_BLKLEN = request->block_len;
- REG_MSC_NOB = request->nob;
- }
-
- /* Set command */
- REG_MSC_CMDAT = cmdat;
-
- DEBUG(1, "Send cmd %d cmdat: %x arg: %x resp %d\n", request->cmd,
- cmdat, request->arg, request->rtype);
-
- /* Start MMC/SD clock and send command to card */
- jz_mmc_start_clock();
-
- /* Wait for command completion */
- while (timeout-- && !(REG_MSC_STAT & MSC_STAT_END_CMD_RES))
- ;
-
- if (timeout == 0)
- return MMC_ERROR_TIMEOUT;
-
- REG_MSC_IREG = MSC_IREG_END_CMD_RES; /* clear flag */
-
- /* Check for status */
- retval = jz_mmc_check_status(request);
- if (retval) {
- return retval;
- }
-
- /* Complete command with no response */
- if (request->rtype == RESPONSE_NONE) {
- return MMC_NO_ERROR;
- }
-
- /* Get response */
- jz_mmc_get_response(request);
-
- /* Start data operation */
- if (events & (MMC_EVENT_RX_DATA_DONE | MMC_EVENT_TX_DATA_DONE)) {
- if (events & MMC_EVENT_RX_DATA_DONE) {
- if (request->cmd == SEND_SCR) {
- /* SD card returns SCR register as data.
- MMC core expect it in the response buffer,
- after normal response. */
- request->buffer = (u8 *)((u32)request->response + 5);
- }
- jz_mmc_receive_data(request);
- }
-
- if (events & MMC_EVENT_TX_DATA_DONE) {
- jz_mmc_transmit_data(request);
- }
-
- /* Wait for Data Done */
- while (!(REG_MSC_IREG & MSC_IREG_DATA_TRAN_DONE))
- ;
- REG_MSC_IREG = MSC_IREG_DATA_TRAN_DONE; /* clear status */
- }
-
- /* Wait for Prog Done event */
- if (events & MMC_EVENT_PROG_DONE) {
- while (!(REG_MSC_IREG & MSC_IREG_PRG_DONE))
- ;
- REG_MSC_IREG = MSC_IREG_PRG_DONE; /* clear status */
- }
-
- /* Command completed */
-
- return MMC_NO_ERROR; /* return successfully */
-}
-
-int mmc_block_read(u8 *dst, ulong src, ulong len)
-{
-
- struct mmc_request request;
- struct mmc_response_r1 r1;
- int retval;
-
- if (len == 0) {
- return 0;
- }
- mmc_simple_cmd(&request, MMC_SEND_STATUS, mmcinfo.rca, RESPONSE_R1);
- retval = mmc_unpack_r1(&request, &r1, 0);
- if (retval && (retval != MMC_ERROR_STATE_MISMATCH)) {
- return retval;
- }
-
- mmc_simple_cmd(&request, MMC_SET_BLOCKLEN, len, RESPONSE_R1);
- if ((retval = mmc_unpack_r1(&request, &r1, 0))) {
- return retval;
- }
-
- if (sd2_0)
- src /= len;
-
- mmc_send_cmd(&request, MMC_READ_SINGLE_BLOCK, src, 1,len, RESPONSE_R1, dst);
- if ((retval = mmc_unpack_r1(&request, &r1, 0))) {
- return retval;
- }
- return retval;
-}
-
-int mmc_block_write(ulong dst, uchar *src, int len)
-{
- return 0;
-}
-
-int mmc_read(ulong src, uchar *dst, int size)
-{
- ulong end, part_start, part_end, part_len, aligned_start, aligned_end;
- ulong mmc_block_size, mmc_block_address;
-
- if (size == 0) {
- return 0;
- }
-
- if (!mmc_ready) {
- printf("MMC card is not ready\n");
- return -1;
- }
-
- mmc_block_size = MMC_BLOCK_SIZE;
- mmc_block_address = ~(mmc_block_size - 1);
-
- src -= CFG_MMC_BASE;
- end = src + size;
- part_start = ~mmc_block_address & src;
- part_end = ~mmc_block_address & end;
- aligned_start = mmc_block_address & src;
- aligned_end = mmc_block_address & end;
- /* all block aligned accesses */
- debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
- src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
- if (part_start) {
- part_len = mmc_block_size - part_start;
- debug("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
- src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
- if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < 0) {
- return -1;
- }
- memcpy(dst, mmc_buf+part_start, part_len);
- dst += part_len;
- src += part_len;
- }
- debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
- src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
- for (; src < aligned_end; src += mmc_block_size, dst += mmc_block_size) {
- debug("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
- src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-
- if ((mmc_block_read((uchar *)(dst), src, mmc_block_size)) < 0) {
- return -1;
- }
- }
- debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
- src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-
- if (part_end && src < end) {
- if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) {
- return -1;
- }
- memcpy(dst, mmc_buf, part_end);
- }
- return 0;
-
-}
-
-int mmc_write(uchar *src, ulong dst, int size)
-{
- ulong end, part_start, part_end, part_len, aligned_start, aligned_end;
- ulong mmc_block_size, mmc_block_address;
-
- if (size == 0) {
- return 0;
- }
-
- if (!mmc_ready) {
- printf("MMC card is not ready\n");
- return -1;
- }
-
- mmc_block_size = MMC_BLOCK_SIZE;
- mmc_block_address = ~(mmc_block_size - 1);
-
- dst -= CFG_MMC_BASE;
- end = dst + size;
- part_start = ~mmc_block_address & dst;
- part_end = ~mmc_block_address & end;
- aligned_start = mmc_block_address & dst;
- aligned_end = mmc_block_address & end;
-
- /* all block aligned accesses */
- debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
- src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
- if (part_start) {
- part_len = mmc_block_size - part_start;
- debug("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
- (ulong)src, dst, end, part_start, part_end, aligned_start, aligned_end);
- if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < 0) {
- return -1;
- }
- memcpy(mmc_buf+part_start, src, part_len);
- if ((mmc_block_write(aligned_start, mmc_buf, mmc_block_size)) < 0) {
- return -1;
- }
- dst += part_len;
- src += part_len;
- }
- debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
- src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
- for (; dst < aligned_end; src += mmc_block_size, dst += mmc_block_size) {
- debug("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
- src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
- if ((mmc_block_write(dst, (uchar *)src, mmc_block_size)) < 0) {
- return -1;
- }
- }
- debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
- src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
- if (part_end && dst < end) {
- debug("pe src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
- src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
- if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) {
- return -1;
- }
- memcpy(mmc_buf, src, part_end);
- if ((mmc_block_write(aligned_end, mmc_buf, mmc_block_size)) < 0) {
- return -1;
- }
- }
- return 0;
-}
-
-ulong mmc_bread(int dev_num, ulong blknr, ulong blkcnt, ulong *dst)
-{
- ulong src;
- int mmc_block_size = MMC_BLOCK_SIZE;
-
- src = blknr * mmc_block_size + CFG_MMC_BASE;
- mmc_read(src, (uchar *)dst, blkcnt*mmc_block_size);
- return blkcnt;
-}
-
-int mmc_select_card(void)
-{
- struct mmc_request request;
- struct mmc_response_r1 r1;
- int retval;
-
- mmc_simple_cmd(&request, MMC_SELECT_CARD, mmcinfo.rca, RESPONSE_R1B);
- retval = mmc_unpack_r1(&request, &r1, 0);
- if (retval) {
- return retval;
- }
-
- if (mmcinfo.sd) {
- mmc_simple_cmd(&request, MMC_APP_CMD, mmcinfo.rca, RESPONSE_R1);
- retval = mmc_unpack_r1(&request,&r1,0);
- if (retval) {
- return retval;
- }
-#if defined(MMC_BUS_WIDTH_1BIT)
- mmc_simple_cmd(&request, SET_BUS_WIDTH, 1, RESPONSE_R1);
-#else
- mmc_simple_cmd(&request, SET_BUS_WIDTH, 2, RESPONSE_R1);
-#endif
- retval = mmc_unpack_r1(&request,&r1,0);
- if (retval) {
- return retval;
- }
- }
- return 0;
-}
-
-/*
- * Configure card
- */
-static void mmc_configure_card(void)
-{
- u32 rate;
-
- /* Get card info */
- if (sd2_0)
- mmcinfo.block_num = (mmcinfo.csd.c_size + 1) << 10;
- else
- mmcinfo.block_num = (mmcinfo.csd.c_size + 1) * (1 << (mmcinfo.csd.c_size_mult + 2));
-
- mmcinfo.block_len = 1 << mmcinfo.csd.read_bl_len;
-
- /* Fix the clock rate */
- rate = mmc_tran_speed(mmcinfo.csd.tran_speed);
- if (rate < MMC_CLOCK_SLOW)
- rate = MMC_CLOCK_SLOW;
- if ((mmcinfo.sd == 0) && (rate > MMC_CLOCK_FAST))
- rate = MMC_CLOCK_FAST;
- if ((mmcinfo.sd) && (rate > SD_CLOCK_FAST))
- rate = SD_CLOCK_FAST;
-
- DEBUG(2,"mmc_configure_card: block_len=%d block_num=%d rate=%d\n", mmcinfo.block_len, mmcinfo.block_num, rate);
-
- jz_mmc_set_clock(mmcinfo.sd, rate);
-}
-
-/*
- * State machine routines to initialize card(s)
- */
-
-/*
- CIM_SINGLE_CARD_ACQ (frequency at 400 kHz)
- --- Must enter from GO_IDLE_STATE ---
- 1. SD_SEND_OP_COND (SD Card) [CMD55] + [CMD41]
- 2. SEND_OP_COND (Full Range) [CMD1] {optional}
- 3. SEND_OP_COND (Set Range ) [CMD1]
- If busy, delay and repeat step 2
- 4. ALL_SEND_CID [CMD2]
- If timeout, set an error (no cards found)
- 5. SET_RELATIVE_ADDR [CMD3]
- 6. SEND_CSD [CMD9]
- 7. SET_DSR [CMD4] Only call this if (csd.dsr_imp).
- 8. Set clock frequency (check available in csd.tran_speed)
- */
-
-#define MMC_INIT_DOING 0
-#define MMC_INIT_PASSED 1
-#define MMC_INIT_FAILED 2
-
-static int mmc_init_card_state(struct mmc_request *request)
-{
- struct mmc_response_r1 r1;
- struct mmc_response_r3 r3;
- int retval;
- int ocr = 0x40300000;
- int limit_41 = 0;
-
- DEBUG(2,"mmc_init_card_state\n");
-
- switch (request->cmd) {
- case MMC_GO_IDLE_STATE: /* No response to parse */
- if (mmcinfo.sd)
- mmc_simple_cmd(request, 8, 0x1aa, RESPONSE_R1);
- else
- mmc_simple_cmd(request, MMC_SEND_OP_COND, MMC_OCR_ARG, RESPONSE_R3);
- break;
-
- case 8:
- retval = mmc_unpack_r1(request,&r1,mmcinfo.state);
- mmc_simple_cmd(request, MMC_APP_CMD, 0, RESPONSE_R1);
- break;
-
- case MMC_APP_CMD:
- retval = mmc_unpack_r1(request,&r1,mmcinfo.state);
- if (retval & (limit_41 < 100)) {
- DEBUG(0, "mmc_init_card_state: unable to MMC_APP_CMD error=%d (%s)\n",
- retval, mmc_result_to_string(retval));
- limit_41++;
- mmc_simple_cmd(request, SD_SEND_OP_COND, ocr, RESPONSE_R3);
- } else if (limit_41 < 100) {
- limit_41++;
- mmc_simple_cmd(request, SD_SEND_OP_COND, ocr, RESPONSE_R3);
- } else{
- /* reset the card to idle*/
- mmc_simple_cmd(request, MMC_GO_IDLE_STATE, 0, RESPONSE_NONE);
- mmcinfo.sd = 0;
- }
- break;
-
- case SD_SEND_OP_COND:
- retval = mmc_unpack_r3(request, &r3);
- if (retval) {
- /* Try MMC card */
- mmc_simple_cmd(request, MMC_SEND_OP_COND, MMC_OCR_ARG, RESPONSE_R3);
- break;
- }
-
- DEBUG(2,"mmc_init_card_state: read ocr value = 0x%08x\n", r3.ocr);
-
- if(!(r3.ocr & MMC_CARD_BUSY || ocr == 0)){
- udelay(10000);
- mmc_simple_cmd(request, MMC_APP_CMD, 0, RESPONSE_R1);
- }
- else {
- /* Set the data bus width to 4 bits */
- mmcinfo.sd = 1; /* SD Card ready */
- mmcinfo.state = CARD_STATE_READY;
- mmc_simple_cmd(request, MMC_ALL_SEND_CID, 0, RESPONSE_R2_CID);
- }
- break;
-
- case MMC_SEND_OP_COND:
- retval = mmc_unpack_r3(request, &r3);
- if (retval) {
- DEBUG(0,"mmc_init_card_state: failed SEND_OP_COND error=%d (%s)\n",
- retval, mmc_result_to_string(retval));
- return MMC_INIT_FAILED;
- }
-
- DEBUG(2,"mmc_init_card_state: read ocr value = 0x%08x\n", r3.ocr);
- if (!(r3.ocr & MMC_CARD_BUSY)) {
- mmc_simple_cmd(request, MMC_SEND_OP_COND, MMC_OCR_ARG, RESPONSE_R3);
- }
- else {
- mmcinfo.sd = 0; /* MMC Card ready */
- mmcinfo.state = CARD_STATE_READY;
- mmc_simple_cmd(request, MMC_ALL_SEND_CID, 0, RESPONSE_R2_CID);
- }
- break;
-
- case MMC_ALL_SEND_CID:
- retval = mmc_unpack_cid( request, &mmcinfo.cid );
- mmc_dev.if_type = IF_TYPE_MMC;
- mmc_dev.part_type = PART_TYPE_DOS;
- mmc_dev.dev = 0;
- mmc_dev.lun = 0;
- mmc_dev.type = 0;
- /* FIXME fill in the correct size (is set to 32MByte) */
- mmc_dev.blksz = 512;
- mmc_dev.lba = 0x10000;
- mmc_dev.removable = 0;
-
- /*FIXME:ignore CRC error for CMD2/CMD9/CMD10 */
- if ( retval && (retval != MMC_ERROR_CRC)) {
- DEBUG(0,"mmc_init_card_state: unable to ALL_SEND_CID error=%d (%s)\n",
- retval, mmc_result_to_string(retval));
- return MMC_INIT_FAILED;
- }
- mmcinfo.state = CARD_STATE_IDENT;
- if(mmcinfo.sd)
- mmc_simple_cmd(request, MMC_SET_RELATIVE_ADDR, 0, RESPONSE_R6);
- else
- mmc_simple_cmd(request, MMC_SET_RELATIVE_ADDR, ID_TO_RCA(mmcinfo.id) << 16, RESPONSE_R1);
- break;
-
- case MMC_SET_RELATIVE_ADDR:
- if (mmcinfo.sd) {
- retval = mmc_unpack_r6(request, &r1, mmcinfo.state, &mmcinfo.rca);
- mmcinfo.rca = mmcinfo.rca << 16;
- DEBUG(2, "mmc_init_card_state: Get RCA from SD: 0x%04x Status: %x\n", mmcinfo.rca, r1.status);
- } else {
- retval = mmc_unpack_r1(request,&r1,mmcinfo.state);
- mmcinfo.rca = ID_TO_RCA(mmcinfo.id) << 16;
- }
- if (retval) {
- DEBUG(0, "mmc_init_card_state: unable to SET_RELATIVE_ADDR error=%d (%s)\n",
- retval, mmc_result_to_string(retval));
- return MMC_INIT_FAILED;
- }
-
- mmcinfo.state = CARD_STATE_STBY;
- mmc_simple_cmd(request, MMC_SEND_CSD, mmcinfo.rca, RESPONSE_R2_CSD);
-
- break;
-
- case MMC_SEND_CSD:
- retval = mmc_unpack_csd(request, &mmcinfo.csd);
- mmc_csd_t *csd = (mmc_csd_t *)retval;
- memcpy(&mmc_csd, csd, sizeof(csd));
- mmc_ready = 1;
-
- printf("MMC card is ready\n");
- /* FIXME add verbose printout for csd */
-
- /*FIXME:ignore CRC error for CMD2/CMD9/CMD10 */
- if (retval && (retval != MMC_ERROR_CRC)) {
- DEBUG(0, "mmc_init_card_state: unable to SEND_CSD error=%d (%s)\n",
- retval, mmc_result_to_string(retval));
- return MMC_INIT_FAILED;
- }
- if (mmcinfo.csd.dsr_imp) {
- DEBUG(0, "mmc_init_card_state: driver doesn't support setting DSR\n");
- }
- mmc_configure_card();
- return MMC_INIT_PASSED;
-
- default:
- DEBUG(0, "mmc_init_card_state: error! Illegal last cmd %d\n", request->cmd);
- return MMC_INIT_FAILED;
- }
-
- return MMC_INIT_DOING;
-}
-
-int mmc_init_card(void)
-{
- struct mmc_request request;
- int retval;
-
- mmc_simple_cmd(&request, MMC_CIM_RESET, 0, RESPONSE_NONE); /* reset card */
- mmc_simple_cmd(&request, MMC_GO_IDLE_STATE, 0, RESPONSE_NONE);
- mmcinfo.sd = 1; /* assuming a SD card */
-
- while ((retval = mmc_init_card_state(&request)) == MMC_INIT_DOING)
- ;
-
- if (retval == MMC_INIT_PASSED)
- return MMC_NO_ERROR;
- else
- return MMC_NO_RESPONSE;
-}
-
-int mmc_legacy_init(int verbose)
-{
- if (!__msc_card_detected())
- return 1;
-
- printf("MMC card found\n");
-
- /* Step-1: init GPIO */
- __gpio_as_msc();
-
- __msc_init_io();
-
- /* Step-2: turn on power of card */
-#if !defined(CONFIG_SAKC)
- __msc_enable_power();
-#endif
-
- /* Step-3: Reset MSC Controller. */
- __msc_reset();
-
- /* Step-3: mask all IRQs. */
- MMC_IRQ_MASK();
-
- /* Step-4: stop MMC/SD clock */
- jz_mmc_stop_clock();
- mmc_init_card();
- mmc_select_card();
-
- mmc_dev.block_read = mmc_bread;
- fat_register_device(&mmc_dev,1); /* partitions start counting with 1 */
-
- return 0;
-}
-
-int mmc_ident(block_dev_desc_t *dev)
-{
- return 0;
-}
-
-int mmc2info(ulong addr)
-{
- /* FIXME hard codes to 32 MB device */
- if (addr >= CFG_MMC_BASE && addr < CFG_MMC_BASE + 0x02000000) {
- return 1;
- }
- return 0;
-}
-/*
- * Debugging functions
- */
-
-static char * mmc_result_strings[] = {
- "NO_RESPONSE",
- "NO_ERROR",
- "ERROR_OUT_OF_RANGE",
- "ERROR_ADDRESS",
- "ERROR_BLOCK_LEN",
- "ERROR_ERASE_SEQ",
- "ERROR_ERASE_PARAM",
- "ERROR_WP_VIOLATION",
- "ERROR_CARD_IS_LOCKED",
- "ERROR_LOCK_UNLOCK_FAILED",
- "ERROR_COM_CRC",
- "ERROR_ILLEGAL_COMMAND",
- "ERROR_CARD_ECC_FAILED",
- "ERROR_CC",
- "ERROR_GENERAL",
- "ERROR_UNDERRUN",
- "ERROR_OVERRUN",
- "ERROR_CID_CSD_OVERWRITE",
- "ERROR_STATE_MISMATCH",
- "ERROR_HEADER_MISMATCH",
- "ERROR_TIMEOUT",
- "ERROR_CRC",
- "ERROR_DRIVER_FAILURE",
-};
-
-char * mmc_result_to_string(int i)
-{
- return mmc_result_strings[i+1];
-}
-
-static char * card_state_strings[] = {
- "empty",
- "idle",
- "ready",
- "ident",
- "stby",
- "tran",
- "data",
- "rcv",
- "prg",
- "dis",
-};
-
-static inline char * card_state_to_string(int i)
-{
- return card_state_strings[i+1];
-}
-
-/*
- * Utility functions
- */
-
-#define PARSE_U32(_buf,_index) \
- (((u32)_buf[_index]) << 24) | (((u32)_buf[_index+1]) << 16) | \
- (((u32)_buf[_index+2]) << 8) | ((u32)_buf[_index+3]);
-
-#define PARSE_U16(_buf,_index) \
- (((u16)_buf[_index]) << 8) | ((u16)_buf[_index+1]);
-
-int mmc_unpack_csd(struct mmc_request *request, struct mmc_csd *csd)
-{
- u8 *buf = request->response;
- int num = 0;
-
- if (request->result)
- return request->result;
-
- csd->csd_structure = (buf[1] & 0xc0) >> 6;
- if (csd->csd_structure)
- sd2_0 = 1;
- else
- sd2_0 = 0;
-
- switch (csd->csd_structure) {
- case 0 :
- csd->taac = buf[2];
- csd->nsac = buf[3];
- csd->tran_speed = buf[4];
- csd->ccc = (((u16)buf[5]) << 4) | ((buf[6] & 0xf0) >> 4);
- csd->read_bl_len = buf[6] & 0x0f;
- /* for support 2GB card*/
- if (csd->read_bl_len >= 10)
- {
- num = csd->read_bl_len - 9;
- csd->read_bl_len = 9;
- }
-
- csd->read_bl_partial = (buf[7] & 0x80) ? 1 : 0;
- csd->write_blk_misalign = (buf[7] & 0x40) ? 1 : 0;
- csd->read_blk_misalign = (buf[7] & 0x20) ? 1 : 0;
- csd->dsr_imp = (buf[7] & 0x10) ? 1 : 0;
- csd->c_size = ((((u16)buf[7]) & 0x03) << 10) | (((u16)buf[8]) << 2) | (((u16)buf[9]) & 0xc0) >> 6;
-
- if (num)
- csd->c_size = csd->c_size << num;
-
-
- csd->vdd_r_curr_min = (buf[9] & 0x38) >> 3;
- csd->vdd_r_curr_max = buf[9] & 0x07;
- csd->vdd_w_curr_min = (buf[10] & 0xe0) >> 5;
- csd->vdd_w_curr_max = (buf[10] & 0x1c) >> 2;
- csd->c_size_mult = ((buf[10] & 0x03) << 1) | ((buf[11] & 0x80) >> 7);
- switch (csd->csd_structure) {
- case CSD_STRUCT_VER_1_0:
- case CSD_STRUCT_VER_1_1:
- csd->erase.v22.sector_size = (buf[11] & 0x7c) >> 2;
- csd->erase.v22.erase_grp_size = ((buf[11] & 0x03) << 3) | ((buf[12] & 0xe0) >> 5);
-
- break;
- case CSD_STRUCT_VER_1_2:
- default:
- csd->erase.v31.erase_grp_size = (buf[11] & 0x7c) >> 2;
- csd->erase.v31.erase_grp_mult = ((buf[11] & 0x03) << 3) | ((buf[12] & 0xe0) >> 5);
- break;
- }
- csd->wp_grp_size = buf[12] & 0x1f;
- csd->wp_grp_enable = (buf[13] & 0x80) ? 1 : 0;
- csd->default_ecc = (buf[13] & 0x60) >> 5;
- csd->r2w_factor = (buf[13] & 0x1c) >> 2;
- csd->write_bl_len = ((buf[13] & 0x03) << 2) | ((buf[14] & 0xc0) >> 6);
- if (csd->write_bl_len >= 10)
- csd->write_bl_len = 9;
-
- csd->write_bl_partial = (buf[14] & 0x20) ? 1 : 0;
- csd->file_format_grp = (buf[15] & 0x80) ? 1 : 0;
- csd->copy = (buf[15] & 0x40) ? 1 : 0;
- csd->perm_write_protect = (buf[15] & 0x20) ? 1 : 0;
- csd->tmp_write_protect = (buf[15] & 0x10) ? 1 : 0;
- csd->file_format = (buf[15] & 0x0c) >> 2;
- csd->ecc = buf[15] & 0x03;
-
- DEBUG(2," csd_structure=%d spec_vers=%d taac=%02x nsac=%02x tran_speed=%02x\n"
- " ccc=%04x read_bl_len=%d read_bl_partial=%d write_blk_misalign=%d\n"
- " read_blk_misalign=%d dsr_imp=%d c_size=%d vdd_r_curr_min=%d\n"
- " vdd_r_curr_max=%d vdd_w_curr_min=%d vdd_w_curr_max=%d c_size_mult=%d\n"
- " wp_grp_size=%d wp_grp_enable=%d default_ecc=%d r2w_factor=%d\n"
- " write_bl_len=%d write_bl_partial=%d file_format_grp=%d copy=%d\n"
- " perm_write_protect=%d tmp_write_protect=%d file_format=%d ecc=%d\n",
- csd->csd_structure, csd->spec_vers,
- csd->taac, csd->nsac, csd->tran_speed,
- csd->ccc, csd->read_bl_len,
- csd->read_bl_partial, csd->write_blk_misalign,
- csd->read_blk_misalign, csd->dsr_imp,
- csd->c_size, csd->vdd_r_curr_min,
- csd->vdd_r_curr_max, csd->vdd_w_curr_min,
- csd->vdd_w_curr_max, csd->c_size_mult,
- csd->wp_grp_size, csd->wp_grp_enable,
- csd->default_ecc, csd->r2w_factor,
- csd->write_bl_len, csd->write_bl_partial,
- csd->file_format_grp, csd->copy,
- csd->perm_write_protect, csd->tmp_write_protect,
- csd->file_format, csd->ecc);
- switch (csd->csd_structure) {
- case CSD_STRUCT_VER_1_0:
- case CSD_STRUCT_VER_1_1:
- DEBUG(2," V22 sector_size=%d erase_grp_size=%d\n",
- csd->erase.v22.sector_size,
- csd->erase.v22.erase_grp_size);
- break;
- case CSD_STRUCT_VER_1_2:
- default:
- DEBUG(2," V31 erase_grp_size=%d erase_grp_mult=%d\n",
- csd->erase.v31.erase_grp_size,
- csd->erase.v31.erase_grp_mult);
- break;
-
- }
- break;
-
- case 1 :
- csd->taac = 0;
- csd->nsac = 0;
- csd->tran_speed = buf[4];
- csd->ccc = (((u16)buf[5]) << 4) | ((buf[6] & 0xf0) >> 4);
-
- csd->read_bl_len = 9;
- csd->read_bl_partial = 0;
- csd->write_blk_misalign = 0;
- csd->read_blk_misalign = 0;
- csd->dsr_imp = (buf[7] & 0x10) ? 1 : 0;
- csd->c_size = ((((u16)buf[8]) & 0x3f) << 16) | (((u16)buf[9]) << 8) | ((u16)buf[10]) ;
- switch (csd->csd_structure) {
- case CSD_STRUCT_VER_1_0:
- case CSD_STRUCT_VER_1_1:
- csd->erase.v22.sector_size = 0x7f;
- csd->erase.v22.erase_grp_size = 0;
- break;
- case CSD_STRUCT_VER_1_2:
- default:
- csd->erase.v31.erase_grp_size = 0x7f;
- csd->erase.v31.erase_grp_mult = 0;
- break;
- }
- csd->wp_grp_size = 0;
- csd->wp_grp_enable = 0;
- csd->default_ecc = (buf[13] & 0x60) >> 5;
- csd->r2w_factor = 4;/* Unused */
- csd->write_bl_len = 9;
-
- csd->write_bl_partial = 0;
- csd->file_format_grp = 0;
- csd->copy = (buf[15] & 0x40) ? 1 : 0;
- csd->perm_write_protect = (buf[15] & 0x20) ? 1 : 0;
- csd->tmp_write_protect = (buf[15] & 0x10) ? 1 : 0;
- csd->file_format = 0;
- csd->ecc = buf[15] & 0x03;
-
- DEBUG(2," csd_structure=%d spec_vers=%d taac=%02x nsac=%02x tran_speed=%02x\n"
- " ccc=%04x read_bl_len=%d read_bl_partial=%d write_blk_misalign=%d\n"
- " read_blk_misalign=%d dsr_imp=%d c_size=%d vdd_r_curr_min=%d\n"
- " vdd_r_curr_max=%d vdd_w_curr_min=%d vdd_w_curr_max=%d c_size_mult=%d\n"
- " wp_grp_size=%d wp_grp_enable=%d default_ecc=%d r2w_factor=%d\n"
- " write_bl_len=%d write_bl_partial=%d file_format_grp=%d copy=%d\n"
- " perm_write_protect=%d tmp_write_protect=%d file_format=%d ecc=%d\n",
- csd->csd_structure, csd->spec_vers,
- csd->taac, csd->nsac, csd->tran_speed,
- csd->ccc, csd->read_bl_len,
- csd->read_bl_partial, csd->write_blk_misalign,
- csd->read_blk_misalign, csd->dsr_imp,
- csd->c_size, csd->vdd_r_curr_min,
- csd->vdd_r_curr_max, csd->vdd_w_curr_min,
- csd->vdd_w_curr_max, csd->c_size_mult,
- csd->wp_grp_size, csd->wp_grp_enable,
- csd->default_ecc, csd->r2w_factor,
- csd->write_bl_len, csd->write_bl_partial,
- csd->file_format_grp, csd->copy,
- csd->perm_write_protect, csd->tmp_write_protect,
- csd->file_format, csd->ecc);
- switch (csd->csd_structure) {
- case CSD_STRUCT_VER_1_0:
- case CSD_STRUCT_VER_1_1:
- DEBUG(2," V22 sector_size=%d erase_grp_size=%d\n",
- csd->erase.v22.sector_size,
- csd->erase.v22.erase_grp_size);
- break;
- case CSD_STRUCT_VER_1_2:
- default:
- DEBUG(2," V31 erase_grp_size=%d erase_grp_mult=%d\n",
- csd->erase.v31.erase_grp_size,
- csd->erase.v31.erase_grp_mult);
- break;
- }
- }
-
- if (buf[0] != 0x3f) return MMC_ERROR_HEADER_MISMATCH;
-
- return 0;
-}
-
-int mmc_unpack_r1(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state)
-{
- u8 *buf = request->response;
-
- if (request->result) return request->result;
-
- r1->cmd = buf[0];
- r1->status = PARSE_U32(buf,1);
-
- DEBUG(2, "mmc_unpack_r1: cmd=%d status=%08x\n", r1->cmd, r1->status);
-
- if (R1_STATUS(r1->status)) {
- if (r1->status & R1_OUT_OF_RANGE) return MMC_ERROR_OUT_OF_RANGE;
- if (r1->status & R1_ADDRESS_ERROR) return MMC_ERROR_ADDRESS;
- if (r1->status & R1_BLOCK_LEN_ERROR) return MMC_ERROR_BLOCK_LEN;
- if (r1->status & R1_ERASE_SEQ_ERROR) return MMC_ERROR_ERASE_SEQ;
- if (r1->status & R1_ERASE_PARAM) return MMC_ERROR_ERASE_PARAM;
- if (r1->status & R1_WP_VIOLATION) return MMC_ERROR_WP_VIOLATION;
- /*if (r1->status & R1_CARD_IS_LOCKED) return MMC_ERROR_CARD_IS_LOCKED; */
- if (r1->status & R1_LOCK_UNLOCK_FAILED) return MMC_ERROR_LOCK_UNLOCK_FAILED;
- if (r1->status & R1_COM_CRC_ERROR) return MMC_ERROR_COM_CRC;
- if (r1->status & R1_ILLEGAL_COMMAND) return MMC_ERROR_ILLEGAL_COMMAND;
- if (r1->status & R1_CARD_ECC_FAILED) return MMC_ERROR_CARD_ECC_FAILED;
- if (r1->status & R1_CC_ERROR) return MMC_ERROR_CC;
- if (r1->status & R1_ERROR) return MMC_ERROR_GENERAL;
- if (r1->status & R1_UNDERRUN) return MMC_ERROR_UNDERRUN;
- if (r1->status & R1_OVERRUN) return MMC_ERROR_OVERRUN;
- if (r1->status & R1_CID_CSD_OVERWRITE) return MMC_ERROR_CID_CSD_OVERWRITE;
- }
-
- if (buf[0] != request->cmd) return MMC_ERROR_HEADER_MISMATCH;
-
- /* This should be last - it's the least dangerous error */
-
- return 0;
-}
-
-int mmc_unpack_scr(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state, u32 *scr)
-{
- u8 *buf = request->response;
- if (request->result) return request->result;
-
- *scr = PARSE_U32(buf, 5); /* Save SCR returned by the SD Card */
- return mmc_unpack_r1(request, r1, state);
-
-}
-
-int mmc_unpack_r6(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state, int *rca)
-{
- u8 *buf = request->response;
-
- if (request->result) return request->result;
-
- *rca = PARSE_U16(buf,1); /* Save RCA returned by the SD Card */
-
- *(buf+1) = 0;
- *(buf+2) = 0;
-
- return mmc_unpack_r1(request, r1, state);
-}
-
-int mmc_unpack_cid(struct mmc_request *request, struct mmc_cid *cid)
-{
- u8 *buf = request->response;
- int i;
-
- if (request->result) return request->result;
-
- cid->mid = buf[1];
- cid->oid = PARSE_U16(buf,2);
- for (i = 0 ; i < 6 ; i++)
- cid->pnm[i] = buf[4+i];
- cid->pnm[6] = 0;
- cid->prv = buf[10];
- cid->psn = PARSE_U32(buf,11);
- cid->mdt = buf[15];
-
- DEBUG(2,"mmc_unpack_cid: mid=%d oid=%d pnm=%s prv=%d.%d psn=%08x mdt=%d/%d\n",
- cid->mid, cid->oid, cid->pnm,
- (cid->prv>>4), (cid->prv&0xf),
- cid->psn, (cid->mdt>>4), (cid->mdt&0xf)+1997);
-
- if (buf[0] != 0x3f) return MMC_ERROR_HEADER_MISMATCH;
- return 0;
-}
-
-int mmc_unpack_r3(struct mmc_request *request, struct mmc_response_r3 *r3)
-{
- u8 *buf = request->response;
-
- if (request->result) return request->result;
-
- r3->ocr = PARSE_U32(buf,1);
- DEBUG(2,"mmc_unpack_r3: ocr=%08x\n", r3->ocr);
-
- if (buf[0] != 0x3f) return MMC_ERROR_HEADER_MISMATCH;
- return 0;
-}
-
-#define KBPS 1
-#define MBPS 1000
-
-static u32 ts_exp[] = { 100*KBPS, 1*MBPS, 10*MBPS, 100*MBPS, 0, 0, 0, 0 };
-static u32 ts_mul[] = { 0, 1000, 1200, 1300, 1500, 2000, 2500, 3000,
- 3500, 4000, 4500, 5000, 5500, 6000, 7000, 8000 };
-
-u32 mmc_tran_speed(u8 ts)
-{
- u32 rate = ts_exp[(ts & 0x7)] * ts_mul[(ts & 0x78) >> 3];
-
- if (rate <= 0) {
- DEBUG(0, "mmc_tran_speed: error - unrecognized speed 0x%02x\n", ts);
- return 1;
- }
-
- return rate;
-}
-
-void mmc_send_cmd(struct mmc_request *request, int cmd, u32 arg,
- u16 nob, u16 block_len, enum mmc_rsp_t rtype, u8 *buffer)
-{
- request->cmd = cmd;
- request->arg = arg;
- request->rtype = rtype;
- request->nob = nob;
- request->block_len = block_len;
- request->buffer = buffer;
- request->cnt = nob * block_len;
-
- jz_mmc_exec_cmd(request);
-}
-
-#endif /* CONFIG_MMC */
-#endif /* CONFIG_JZ4740 */
diff --git a/package/boot/uboot-xburst/files/cpu/mips/jz_mmc.h b/package/boot/uboot-xburst/files/cpu/mips/jz_mmc.h
deleted file mode 100644
index 0c7b70f..0000000
--- a/package/boot/uboot-xburst/files/cpu/mips/jz_mmc.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * linux/drivers/mmc/jz_mmc.h
- *
- * Author: Vladimir Shebordaev, Igor Oblakov
- * Copyright: MontaVista Software Inc.
- *
- * $Id: jz_mmc.h,v 1.3 2007-06-15 08:04:20 jlwei Exp $
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __MMC_JZMMC_H__
-#define __MMC_JZMMC_H__
-
-#include "mmc_protocol.h"
-
-#define MMC_DEBUG_LEVEL 0 /* Enable Debug: 0 - no debug */
-
-#define MMC_BLOCK_SIZE 512 /* MMC/SD Block Size */
-
-#define ID_TO_RCA(x) ((x)+1)
-
-#define MMC_OCR_ARG 0x00ff8000 /* Argument of OCR */
-
-enum mmc_result_t {
- MMC_NO_RESPONSE = -1,
- MMC_NO_ERROR = 0,
- MMC_ERROR_OUT_OF_RANGE,
- MMC_ERROR_ADDRESS,
- MMC_ERROR_BLOCK_LEN,
- MMC_ERROR_ERASE_SEQ,
- MMC_ERROR_ERASE_PARAM,
- MMC_ERROR_WP_VIOLATION,
- MMC_ERROR_CARD_IS_LOCKED,
- MMC_ERROR_LOCK_UNLOCK_FAILED,
- MMC_ERROR_COM_CRC,
- MMC_ERROR_ILLEGAL_COMMAND,
- MMC_ERROR_CARD_ECC_FAILED,
- MMC_ERROR_CC,
- MMC_ERROR_GENERAL,
- MMC_ERROR_UNDERRUN,
- MMC_ERROR_OVERRUN,
- MMC_ERROR_CID_CSD_OVERWRITE,
- MMC_ERROR_STATE_MISMATCH,
- MMC_ERROR_HEADER_MISMATCH,
- MMC_ERROR_TIMEOUT,
- MMC_ERROR_CRC,
- MMC_ERROR_DRIVER_FAILURE,
-};
-
-/* the information structure of MMC/SD Card */
-typedef struct MMC_INFO
-{
- int id; /* Card index */
- int sd; /* MMC or SD card */
- int rca; /* RCA */
- u32 scr; /* SCR 63:32*/
- int flags; /* Ejected, inserted */
- enum card_state state; /* empty, ident, ready, whatever */
-
- /* Card specific information */
- struct mmc_cid cid;
- struct mmc_csd csd;
- u32 block_num;
- u32 block_len;
- u32 erase_unit;
-} mmc_info;
-
-mmc_info mmcinfo;
-
-struct mmc_request {
- int index; /* Slot index - used for CS lines */
- int cmd; /* Command to send */
- u32 arg; /* Argument to send */
- enum mmc_rsp_t rtype; /* Response type expected */
-
- /* Data transfer (these may be modified at the low level) */
- u16 nob; /* Number of blocks to transfer*/
- u16 block_len; /* Block length */
- u8 *buffer; /* Data buffer */
- u32 cnt; /* Data length, for PIO */
-
- /* Results */
- u8 response[18]; /* Buffer to store response - CRC is optional */
- enum mmc_result_t result;
-};
-
-char * mmc_result_to_string(int);
-int mmc_unpack_csd(struct mmc_request *request, struct mmc_csd *csd);
-int mmc_unpack_r1(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state);
-int mmc_unpack_r6(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state, int *rca);
-int mmc_unpack_scr(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state, u32 *scr);
-int mmc_unpack_cid(struct mmc_request *request, struct mmc_cid *cid);
-int mmc_unpack_r3(struct mmc_request *request, struct mmc_response_r3 *r3);
-
-void mmc_send_cmd(struct mmc_request *request, int cmd, u32 arg,
- u16 nob, u16 block_len, enum mmc_rsp_t rtype, u8 *buffer);
-u32 mmc_tran_speed(u8 ts);
-void jz_mmc_set_clock(int sd, u32 rate);
-void jz_mmc_hardware_init(void);
-
-static inline void mmc_simple_cmd(struct mmc_request *request, int cmd, u32 arg, enum mmc_rsp_t rtype)
-{
- mmc_send_cmd( request, cmd, arg, 0, 0, rtype, 0);
-}
-
-int mmc_legacy_init(int verbose);
-int mmc_read(ulong src, uchar *dst, int size);
-int mmc_write(uchar *src, ulong dst, int size);
-int mmc2info(ulong addr);
-
-#endif /* __MMC_JZMMC_H__ */
diff --git a/package/boot/uboot-xburst/files/cpu/mips/jz_serial.c b/package/boot/uboot-xburst/files/cpu/mips/jz_serial.c
deleted file mode 100644
index e9a18a1..0000000
--- a/package/boot/uboot-xburst/files/cpu/mips/jz_serial.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Jz47xx UART support
- *
- * Hardcoded to UART 0 for now
- * Options also hardcoded to 8N1
- *
- * Copyright (c) 2005
- * Ingenic Semiconductor, <jlwei@ingenic.cn>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-
-#if defined(CONFIG_JZ4740)
-
-#include <common.h>
-
-#include <asm/jz4740.h>
-
-#undef UART_BASE
-#ifndef CONFIG_SYS_UART_BASE
-#define UART_BASE UART0_BASE
-#else
-#define UART_BASE CONFIG_SYS_UART_BASE
-#endif
-
-/******************************************************************************
-*
-* serial_init - initialize a channel
-*
-* This routine initializes the number of data bits, parity
-* and set the selected baud rate. Interrupts are disabled.
-* Set the modem control signals if the option is selected.
-*
-* RETURNS: N/A
-*/
-
-int serial_init (void)
-{
-#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
- volatile u8 *uart_fcr = (volatile u8 *)(UART_BASE + OFF_FCR);
- volatile u8 *uart_lcr = (volatile u8 *)(UART_BASE + OFF_LCR);
- volatile u8 *uart_ier = (volatile u8 *)(UART_BASE + OFF_IER);
- volatile u8 *uart_sircr = (volatile u8 *)(UART_BASE + OFF_SIRCR);
-
- /* Disable port interrupts while changing hardware */
- *uart_ier = 0;
-
- /* Disable UART unit function */
- *uart_fcr = ~UART_FCR_UUE;
-
- /* Set both receiver and transmitter in UART mode (not SIR) */
- *uart_sircr = ~(SIRCR_RSIRE | SIRCR_TSIRE);
-
- /* Set databits, stopbits and parity. (8-bit data, 1 stopbit, no parity) */
- *uart_lcr = UART_LCR_WLEN_8 | UART_LCR_STOP_1;
-
- /* Set baud rate */
- serial_setbrg();
-
- /* Enable UART unit, enable and clear FIFO */
- *uart_fcr = UART_FCR_UUE | UART_FCR_FE | UART_FCR_TFLS | UART_FCR_RFLS;
-#endif
- return 0;
-}
-
-void serial_setbrg (void)
-{
- volatile u8 *uart_lcr = (volatile u8 *)(UART_BASE + OFF_LCR);
- volatile u8 *uart_dlhr = (volatile u8 *)(UART_BASE + OFF_DLHR);
- volatile u8 *uart_dllr = (volatile u8 *)(UART_BASE + OFF_DLLR);
- u32 baud_div, tmp;
-
- baud_div = CONFIG_SYS_EXTAL / 16 / CONFIG_BAUDRATE;
-
- tmp = *uart_lcr;
- tmp |= UART_LCR_DLAB;
- *uart_lcr = tmp;
-
- *uart_dlhr = (baud_div >> 8) & 0xff;
- *uart_dllr = baud_div & 0xff;
-
- tmp &= ~UART_LCR_DLAB;
- *uart_lcr = tmp;
-}
-
-void serial_putc (const char c)
-{
- volatile u8 *uart_lsr = (volatile u8 *)(UART_BASE + OFF_LSR);
- volatile u8 *uart_tdr = (volatile u8 *)(UART_BASE + OFF_TDR);
-
- if (c == '\n') serial_putc ('\r');
-
- /* Wait for fifo to shift out some bytes */
- while ( !((*uart_lsr & (UART_LSR_TDRQ | UART_LSR_TEMT)) == 0x60) );
-
- *uart_tdr = (u8)c;
-}
-
-void serial_puts (const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-int serial_getc (void)
-{
- volatile u8 *uart_rdr = (volatile u8 *)(UART_BASE + OFF_RDR);
-
- while (!serial_tstc());
-
- return *uart_rdr;
-}
-
-int serial_tstc (void)
-{
- volatile u8 *uart_lsr = (volatile u8 *)(UART_BASE + OFF_LSR);
-
- if (*uart_lsr & UART_LSR_DR) {
- /* Data in rfifo */
- return (1);
- }
- return 0;
-}
-
-#endif
diff --git a/package/boot/uboot-xburst/files/cpu/mips/mmc_protocol.h b/package/boot/uboot-xburst/files/cpu/mips/mmc_protocol.h
deleted file mode 100644
index ebd5912..0000000
--- a/package/boot/uboot-xburst/files/cpu/mips/mmc_protocol.h
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
-**********************************************************************
-*
-* uC/MMC
-*
-* (c) Copyright 2005 - 2007, Ingenic Semiconductor, Inc
-* All rights reserved.
-*
-***********************************************************************
-
-----------------------------------------------------------------------
-File : mmc_protocol.h
-Purpose : MMC protocol definitions.
-
-----------------------------------------------------------------------
-Version-Date-----Author-Explanation
-----------------------------------------------------------------------
-1.00.00 20060831 WeiJianli First release
-
-----------------------------------------------------------------------
-Known problems or limitations with current version
-----------------------------------------------------------------------
-(none)
----------------------------END-OF-HEADER------------------------------
-*/
-
-#ifndef __MMC_PROTOCOL__
-#define __MMC_PROTOCOL__
-
-/* Standard MMC/SD clock speeds */
-#define MMC_CLOCK_SLOW 400000 /* 400 kHz for initial setup */
-#define MMC_CLOCK_FAST 20000000 /* 20 MHz for maximum for normal operation */
-#define SD_CLOCK_FAST 24000000 /* 24 MHz for SD Cards */
-
-/* Extra MMC commands for state control */
-/* Use negative numbers to disambiguate */
-#define MMC_CIM_RESET -1
-
-/* Standard MMC commands (3.1) type argument response */
- /* class 1 */
-#define MMC_GO_IDLE_STATE 0 /* bc */
-#define MMC_SEND_OP_COND 1 /* bcr [31:0] OCR R3 */
-#define MMC_ALL_SEND_CID 2 /* bcr R2 */
-#define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */
-#define MMC_SET_DSR 4 /* bc [31:16] RCA */
-#define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */
-#define MMC_SEND_CSD 9 /* ac [31:16] RCA R2 */
-#define MMC_SEND_CID 10 /* ac [31:16] RCA R2 */
-#define MMC_READ_DAT_UNTIL_STOP 11 /* adtc [31:0] dadr R1 */
-#define MMC_STOP_TRANSMISSION 12 /* ac R1b */
-#define MMC_SEND_STATUS 13 /* ac [31:16] RCA R1 */
-#define MMC_GO_INACTIVE_STATE 15 /* ac [31:16] RCA */
-
- /* class 2 */
-#define MMC_SET_BLOCKLEN 16 /* ac [31:0] block len R1 */
-#define MMC_READ_SINGLE_BLOCK 17 /* adtc [31:0] data addr R1 */
-#define MMC_READ_MULTIPLE_BLOCK 18 /* adtc [31:0] data addr R1 */
-
- /* class 3 */
-#define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1 */
-
- /* class 4 */
-#define MMC_SET_BLOCK_COUNT 23 /* adtc [31:0] data addr R1 */
-#define MMC_WRITE_BLOCK 24 /* adtc [31:0] data addr R1 */
-#define MMC_WRITE_MULTIPLE_BLOCK 25 /* adtc R1 */
-#define MMC_PROGRAM_CID 26 /* adtc R1 */
-#define MMC_PROGRAM_CSD 27 /* adtc R1 */
-
- /* class 6 */
-#define MMC_SET_WRITE_PROT 28 /* ac [31:0] data addr R1b */
-#define MMC_CLR_WRITE_PROT 29 /* ac [31:0] data addr R1b */
-#define MMC_SEND_WRITE_PROT 30 /* adtc [31:0] wpdata addr R1 */
-
- /* class 5 */
-#define MMC_ERASE_GROUP_START 35 /* ac [31:0] data addr R1 */
-#define MMC_ERASE_GROUP_END 36 /* ac [31:0] data addr R1 */
-#define MMC_ERASE 37 /* ac R1b */
-
- /* class 9 */
-#define MMC_FAST_IO 39 /* ac <Complex> R4 */
-#define MMC_GO_IRQ_STATE 40 /* bcr R5 */
-
- /* class 7 */
-#define MMC_LOCK_UNLOCK 42 /* adtc R1b */
-
- /* class 8 */
-#define MMC_APP_CMD 55 /* ac [31:16] RCA R1 */
-#define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1b */
-
- /* SD class */
-#define SD_SEND_OP_COND 41 /* bcr [31:0] OCR R3 */
-#define SET_BUS_WIDTH 6 /* ac [1:0] bus width R1 */
-#define SEND_SCR 51 /* adtc [31:0] staff R1 */
-
-/* Don't change the order of these; they are used in dispatch tables */
-enum mmc_rsp_t {
- RESPONSE_NONE = 0,
- RESPONSE_R1 = 1,
- RESPONSE_R1B = 2,
- RESPONSE_R2_CID = 3,
- RESPONSE_R2_CSD = 4,
- RESPONSE_R3 = 5,
- RESPONSE_R4 = 6,
- RESPONSE_R5 = 7,
- RESPONSE_R6 = 8,
-};
-
-
-/*
- MMC status in R1
- Type
- e : error bit
- s : status bit
- r : detected and set for the actual command response
- x : detected and set during command execution. the host must poll
- the card by sending status command in order to read these bits.
- Clear condition
- a : according to the card state
- b : always related to the previous command. Reception of
- a valid command will clear it (with a delay of one command)
- c : clear by read
- */
-
-#define R1_OUT_OF_RANGE (1 << 31) /* er, c */
-#define R1_ADDRESS_ERROR (1 << 30) /* erx, c */
-#define R1_BLOCK_LEN_ERROR (1 << 29) /* er, c */
-#define R1_ERASE_SEQ_ERROR (1 << 28) /* er, c */
-#define R1_ERASE_PARAM (1 << 27) /* ex, c */
-#define R1_WP_VIOLATION (1 << 26) /* erx, c */
-#define R1_CARD_IS_LOCKED (1 << 25) /* sx, a */
-#define R1_LOCK_UNLOCK_FAILED (1 << 24) /* erx, c */
-#define R1_COM_CRC_ERROR (1 << 23) /* er, b */
-#define R1_ILLEGAL_COMMAND (1 << 22) /* er, b */
-#define R1_CARD_ECC_FAILED (1 << 21) /* ex, c */
-#define R1_CC_ERROR (1 << 20) /* erx, c */
-#define R1_ERROR (1 << 19) /* erx, c */
-#define R1_UNDERRUN (1 << 18) /* ex, c */
-#define R1_OVERRUN (1 << 17) /* ex, c */
-#define R1_CID_CSD_OVERWRITE (1 << 16) /* erx, c, CID/CSD overwrite */
-#define R1_WP_ERASE_SKIP (1 << 15) /* sx, c */
-#define R1_CARD_ECC_DISABLED (1 << 14) /* sx, a */
-#define R1_ERASE_RESET (1 << 13) /* sr, c */
-#define R1_STATUS(x) (x & 0xFFFFE000)
-#define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */
-#define R1_READY_FOR_DATA (1 << 8) /* sx, a */
-#define R1_APP_CMD (1 << 7) /* sr, c */
-
-enum card_state {
- CARD_STATE_EMPTY = -1,
- CARD_STATE_IDLE = 0,
- CARD_STATE_READY = 1,
- CARD_STATE_IDENT = 2,
- CARD_STATE_STBY = 3,
- CARD_STATE_TRAN = 4,
- CARD_STATE_DATA = 5,
- CARD_STATE_RCV = 6,
- CARD_STATE_PRG = 7,
- CARD_STATE_DIS = 8,
-};
-
-/* These are unpacked versions of the actual responses */
-
- struct mmc_response_r1 {
- u8 cmd;
- u32 status;
-};
-
-typedef struct mmc_cid {
- u8 mid;
- u16 oid;
- u8 pnm[7]; /* Product name (we null-terminate) */
- u8 prv;
- u32 psn;
- u8 mdt;
-}mmc_cid_t;
-
-typedef struct mmc_csd {
- u8 csd_structure;
- u8 spec_vers;
- u8 taac;
- u8 nsac;
- u8 tran_speed;
- u16 ccc;
- u8 read_bl_len;
- u8 read_bl_partial;
- u8 write_blk_misalign;
- u8 read_blk_misalign;
- u8 dsr_imp;
- u16 c_size;
- u8 vdd_r_curr_min;
- u8 vdd_r_curr_max;
- u8 vdd_w_curr_min;
- u8 vdd_w_curr_max;
- u8 c_size_mult;
- union {
- struct { /* MMC system specification version 3.1 */
- u8 erase_grp_size;
- u8 erase_grp_mult;
- } v31;
- struct { /* MMC system specification version 2.2 */
- u8 sector_size;
- u8 erase_grp_size;
- } v22;
- } erase;
- u8 wp_grp_size;
- u8 wp_grp_enable;
- u8 default_ecc;
- u8 r2w_factor;
- u8 write_bl_len;
- u8 write_bl_partial;
- u8 file_format_grp;
- u8 copy;
- u8 perm_write_protect;
- u8 tmp_write_protect;
- u8 file_format;
- u8 ecc;
-}mmc_csd_t;;
-
-struct mmc_response_r3 {
- u32 ocr;
-};
-
-#define MMC_VDD_145_150 0x00000001 /* VDD voltage 1.45 - 1.50 */
-#define MMC_VDD_150_155 0x00000002 /* VDD voltage 1.50 - 1.55 */
-#define MMC_VDD_155_160 0x00000004 /* VDD voltage 1.55 - 1.60 */
-#define MMC_VDD_160_165 0x00000008 /* VDD voltage 1.60 - 1.65 */
-#define MMC_VDD_165_170 0x00000010 /* VDD voltage 1.65 - 1.70 */
-#define MMC_VDD_17_18 0x00000020 /* VDD voltage 1.7 - 1.8 */
-#define MMC_VDD_18_19 0x00000040 /* VDD voltage 1.8 - 1.9 */
-#define MMC_VDD_19_20 0x00000080 /* VDD voltage 1.9 - 2.0 */
-#define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */
-#define MMC_VDD_21_22 0x00000200 /* VDD voltage 2.1 ~ 2.2 */
-#define MMC_VDD_22_23 0x00000400 /* VDD voltage 2.2 ~ 2.3 */
-#define MMC_VDD_23_24 0x00000800 /* VDD voltage 2.3 ~ 2.4 */
-#define MMC_VDD_24_25 0x00001000 /* VDD voltage 2.4 ~ 2.5 */
-#define MMC_VDD_25_26 0x00002000 /* VDD voltage 2.5 ~ 2.6 */
-#define MMC_VDD_26_27 0x00004000 /* VDD voltage 2.6 ~ 2.7 */
-#define MMC_VDD_27_28 0x00008000 /* VDD voltage 2.7 ~ 2.8 */
-#define MMC_VDD_28_29 0x00010000 /* VDD voltage 2.8 ~ 2.9 */
-#define MMC_VDD_29_30 0x00020000 /* VDD voltage 2.9 ~ 3.0 */
-#define MMC_VDD_30_31 0x00040000 /* VDD voltage 3.0 ~ 3.1 */
-#define MMC_VDD_31_32 0x00080000 /* VDD voltage 3.1 ~ 3.2 */
-#define MMC_VDD_32_33 0x00100000 /* VDD voltage 3.2 ~ 3.3 */
-#define MMC_VDD_33_34 0x00200000 /* VDD voltage 3.3 ~ 3.4 */
-#define MMC_VDD_34_35 0x00400000 /* VDD voltage 3.4 ~ 3.5 */
-#define MMC_VDD_35_36 0x00800000 /* VDD voltage 3.5 ~ 3.6 */
-#define MMC_CARD_BUSY 0x80000000 /* Card Power up status bit */
-
-
-/* CSD field definitions */
-
-#define CSD_STRUCT_VER_1_0 0 /* Valid for system specification 1.0 - 1.2 */
-#define CSD_STRUCT_VER_1_1 1 /* Valid for system specification 1.4 - 2.2 */
-#define CSD_STRUCT_VER_1_2 2 /* Valid for system specification 3.1 */
-
-#define CSD_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.2 */
-#define CSD_SPEC_VER_1 1 /* Implements system specification 1.4 */
-#define CSD_SPEC_VER_2 2 /* Implements system specification 2.0 - 2.2 */
-#define CSD_SPEC_VER_3 3 /* Implements system specification 3.1 */
-
-#if MMC_DEBUG_LEVEL
-
-#define DEBUG(n, args...) \
- do { \
- if (n <= MMC_DEBUG_LEVEL) { \
- printf(args); \
- } \
- } while(0)
-#else
-#define DEBUG(n, args...)
-#endif /* MMC_DEBUG_EN */
-
-#endif /* __MMC_PROTOCOL__ */
diff --git a/package/boot/uboot-xburst/files/cpu/mips/nanonote_gpm940b0.c b/package/boot/uboot-xburst/files/cpu/mips/nanonote_gpm940b0.c
deleted file mode 100644
index 4c98d29..0000000
--- a/package/boot/uboot-xburst/files/cpu/mips/nanonote_gpm940b0.c
+++ /dev/null
@@ -1,420 +0,0 @@
-/*
- * JzRISC lcd controller
- *
- * xiangfu liu <xiangfu.z@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <lcd.h>
-
-#include <asm/io.h> /* virt_to_phys() */
-
-#include <asm/jz4740.h>
-#include "nanonote_gpm940b0.h"
-
-#define align2(n) (n)=((((n)+1)>>1)<<1)
-#define align4(n) (n)=((((n)+3)>>2)<<2)
-#define align8(n) (n)=((((n)+7)>>3)<<3)
-
-struct jzfb_info {
- unsigned int cfg; /* panel mode and pin usage etc. */
- unsigned int w;
- unsigned int h;
- unsigned int bpp; /* bit per pixel */
- unsigned int fclk; /* frame clk */
- unsigned int hsw; /* hsync width, in pclk */
- unsigned int vsw; /* vsync width, in line count */
- unsigned int elw; /* end of line, in pclk */
- unsigned int blw; /* begin of line, in pclk */
- unsigned int efw; /* end of frame, in line count */
- unsigned int bfw; /* begin of frame, in line count */
-};
-
-static struct jzfb_info jzfb = {
- MODE_8BIT_SERIAL_TFT | PCLK_N | HSYNC_N | VSYNC_N,
- 320, 240, 32, 70, 1, 1, 273, 140, 1, 20
-};
-
-vidinfo_t panel_info = {
- 320, 240, LCD_BPP,
-};
-
-int lcd_line_length;
-
-int lcd_color_fg;
-int lcd_color_bg;
-/*
- * Frame buffer memory information
- */
-void *lcd_base; /* Start of framebuffer memory */
-void *lcd_console_address; /* Start of console buffer */
-
-short console_col;
-short console_row;
-
-void lcd_ctrl_init (void *lcdbase);
-void lcd_enable (void);
-void lcd_disable (void);
-
-static int jz_lcd_init_mem(void *lcdbase, vidinfo_t *vid);
-static void jz_lcd_desc_init(vidinfo_t *vid);
-static int jz_lcd_hw_init( vidinfo_t *vid );
-extern int flush_cache_all(void);
-
-void lcd_ctrl_init (void *lcdbase)
-{
- __lcd_display_pin_init();
-
- jz_lcd_init_mem(lcdbase, &panel_info);
- jz_lcd_desc_init(&panel_info);
- jz_lcd_hw_init(&panel_info);
-
- __lcd_display_on() ;
-}
-
-/*
- * Before enabled lcd controller, lcd registers should be configured correctly.
- */
-
-void lcd_enable (void)
-{
- REG_LCD_CTRL &= ~(1<<4); /* LCDCTRL.DIS */
- REG_LCD_CTRL |= 1<<3; /* LCDCTRL.ENA*/
-}
-
-void lcd_disable (void)
-{
- REG_LCD_CTRL |= (1<<4); /* LCDCTRL.DIS, regular disable */
- /* REG_LCD_CTRL |= (1<<3); */ /* LCDCTRL.DIS, quikly disable */
-}
-
-static int jz_lcd_init_mem(void *lcdbase, vidinfo_t *vid)
-{
- u_long palette_mem_size;
- struct jz_fb_info *fbi = &vid->jz_fb;
- int fb_size = vid->vl_row * (vid->vl_col * NBITS (vid->vl_bpix)) / 8;
-
- fbi->screen = (u_long)lcdbase;
- fbi->palette_size = 256;
- palette_mem_size = fbi->palette_size * sizeof(u16);
-
- debug("jz_lcd.c palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
- /* locate palette and descs at end of page following fb */
- fbi->palette = (u_long)lcdbase + fb_size + PAGE_SIZE - palette_mem_size;
-
- return 0;
-}
-
-static void jz_lcd_desc_init(vidinfo_t *vid)
-{
- struct jz_fb_info * fbi;
- fbi = &vid->jz_fb;
- fbi->dmadesc_fblow = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 3*16);
- fbi->dmadesc_fbhigh = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 2*16);
- fbi->dmadesc_palette = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 1*16);
-
- #define BYTES_PER_PANEL (vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8)
-
- /* populate descriptors */
- fbi->dmadesc_fblow->fdadr = virt_to_phys(fbi->dmadesc_fblow);
- fbi->dmadesc_fblow->fsadr = virt_to_phys((void *)(fbi->screen + BYTES_PER_PANEL));
- fbi->dmadesc_fblow->fidr = 0;
- fbi->dmadesc_fblow->ldcmd = BYTES_PER_PANEL / 4 ;
-
- fbi->fdadr1 = virt_to_phys(fbi->dmadesc_fblow); /* only used in dual-panel mode */
-
- fbi->dmadesc_fbhigh->fsadr = virt_to_phys((void *)fbi->screen);
- fbi->dmadesc_fbhigh->fidr = 0;
- fbi->dmadesc_fbhigh->ldcmd = BYTES_PER_PANEL / 4; /* length in word */
-
- fbi->dmadesc_palette->fsadr = virt_to_phys((void *)fbi->palette);
- fbi->dmadesc_palette->fidr = 0;
- fbi->dmadesc_palette->ldcmd = (fbi->palette_size * 2)/4 | (1<<28);
-
- if(NBITS(vid->vl_bpix) < 12)
- {
- /* assume any mode with <12 bpp is palette driven */
- fbi->dmadesc_palette->fdadr = virt_to_phys(fbi->dmadesc_fbhigh);
- fbi->dmadesc_fbhigh->fdadr = virt_to_phys(fbi->dmadesc_palette);
- /* flips back and forth between pal and fbhigh */
- fbi->fdadr0 = virt_to_phys(fbi->dmadesc_palette);
- } else {
- /* palette shouldn't be loaded in true-color mode */
- fbi->dmadesc_fbhigh->fdadr = virt_to_phys((void *)fbi->dmadesc_fbhigh);
- fbi->fdadr0 = virt_to_phys(fbi->dmadesc_fbhigh); /* no pal just fbhigh */
- }
-
- flush_cache_all();
-}
-
-static int jz_lcd_hw_init(vidinfo_t *vid)
-{
- struct jz_fb_info *fbi = &vid->jz_fb;
- unsigned int val = 0;
- unsigned int pclk;
- unsigned int stnH;
- int pll_div;
-
- /* Setting Control register */
- switch (jzfb.bpp) {
- case 1:
- val |= LCD_CTRL_BPP_1;
- break;
- case 2:
- val |= LCD_CTRL_BPP_2;
- break;
- case 4:
- val |= LCD_CTRL_BPP_4;
- break;
- case 8:
- val |= LCD_CTRL_BPP_8;
- break;
- case 15:
- val |= LCD_CTRL_RGB555;
- case 16:
- val |= LCD_CTRL_BPP_16;
- break;
- case 17 ... 32:
- val |= LCD_CTRL_BPP_18_24; /* target is 4bytes/pixel */
- break;
-
- default:
- printf("jz_lcd.c The BPP %d is not supported\n", jzfb.bpp);
- val |= LCD_CTRL_BPP_16;
- break;
- }
-
- switch (jzfb.cfg & MODE_MASK) {
- case MODE_STN_MONO_DUAL:
- case MODE_STN_COLOR_DUAL:
- case MODE_STN_MONO_SINGLE:
- case MODE_STN_COLOR_SINGLE:
- switch (jzfb.bpp) {
- case 1:
- /* val |= LCD_CTRL_PEDN; */
- case 2:
- val |= LCD_CTRL_FRC_2;
- break;
- case 4:
- val |= LCD_CTRL_FRC_4;
- break;
- case 8:
- default:
- val |= LCD_CTRL_FRC_16;
- break;
- }
- break;
- }
-
- val |= LCD_CTRL_BST_16; /* Burst Length is 16WORD=64Byte */
- val |= LCD_CTRL_OFUP; /* OutFIFO underrun protect */
-
- switch (jzfb.cfg & MODE_MASK) {
- case MODE_STN_MONO_DUAL:
- case MODE_STN_COLOR_DUAL:
- case MODE_STN_MONO_SINGLE:
- case MODE_STN_COLOR_SINGLE:
- switch (jzfb.cfg & STN_DAT_PINMASK) {
- case STN_DAT_PIN1:
- /* Do not adjust the hori-param value. */
- break;
- case STN_DAT_PIN2:
- align2(jzfb.hsw);
- align2(jzfb.elw);
- align2(jzfb.blw);
- break;
- case STN_DAT_PIN4:
- align4(jzfb.hsw);
- align4(jzfb.elw);
- align4(jzfb.blw);
- break;
- case STN_DAT_PIN8:
- align8(jzfb.hsw);
- align8(jzfb.elw);
- align8(jzfb.blw);
- break;
- }
- break;
- }
-
- REG_LCD_CTRL = val;
-
- switch (jzfb.cfg & MODE_MASK) {
- case MODE_STN_MONO_DUAL:
- case MODE_STN_COLOR_DUAL:
- case MODE_STN_MONO_SINGLE:
- case MODE_STN_COLOR_SINGLE:
- if (((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL) ||
- ((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL))
- stnH = jzfb.h >> 1;
- else
- stnH = jzfb.h;
-
- REG_LCD_VSYNC = (0 << 16) | jzfb.vsw;
- REG_LCD_HSYNC = ((jzfb.blw+jzfb.w) << 16) | (jzfb.blw+jzfb.w+jzfb.hsw);
-
- /* Screen setting */
- REG_LCD_VAT = ((jzfb.blw + jzfb.w + jzfb.hsw + jzfb.elw) << 16) | (stnH + jzfb.vsw + jzfb.bfw + jzfb.efw);
- REG_LCD_DAH = (jzfb.blw << 16) | (jzfb.blw + jzfb.w);
- REG_LCD_DAV = (0 << 16) | (stnH);
-
- /* AC BIAs signal */
- REG_LCD_PS = (0 << 16) | (stnH+jzfb.vsw+jzfb.efw+jzfb.bfw);
-
- break;
-
- case MODE_TFT_GEN:
- case MODE_TFT_SHARP:
- case MODE_TFT_CASIO:
- case MODE_TFT_SAMSUNG:
- case MODE_8BIT_SERIAL_TFT:
- case MODE_TFT_18BIT:
- REG_LCD_VSYNC = (0 << 16) | jzfb.vsw;
- REG_LCD_HSYNC = (0 << 16) | jzfb.hsw;
- REG_LCD_DAV =((jzfb.vsw+jzfb.bfw) << 16) | (jzfb.vsw +jzfb.bfw+jzfb.h);
- REG_LCD_DAH = ((jzfb.hsw + jzfb.blw) << 16) | (jzfb.hsw + jzfb.blw + jzfb.w );
- REG_LCD_VAT = (((jzfb.blw + jzfb.w + jzfb.elw + jzfb.hsw)) << 16) \
- | (jzfb.vsw + jzfb.bfw + jzfb.h + jzfb.efw);
- break;
- }
-
- switch (jzfb.cfg & MODE_MASK) {
- case MODE_TFT_SAMSUNG:
- {
- unsigned int total, tp_s, tp_e, ckv_s, ckv_e;
- unsigned int rev_s, rev_e, inv_s, inv_e;
-
- pclk = val * (jzfb.w + jzfb.hsw + jzfb.elw + jzfb.blw) *
- (jzfb.h + jzfb.vsw + jzfb.efw + jzfb.bfw); /* Pixclk */
-
- total = jzfb.blw + jzfb.w + jzfb.elw + jzfb.hsw;
- tp_s = jzfb.blw + jzfb.w + 1;
- tp_e = tp_s + 1;
- /* ckv_s = tp_s - jz_clocks.pixclk/(1000000000/4100); */
- ckv_s = tp_s - pclk/(1000000000/4100);
- ckv_e = tp_s + total;
- rev_s = tp_s - 11; /* -11.5 clk */
- rev_e = rev_s + total;
- inv_s = tp_s;
- inv_e = inv_s + total;
- REG_LCD_CLS = (tp_s << 16) | tp_e;
- REG_LCD_PS = (ckv_s << 16) | ckv_e;
- REG_LCD_SPL = (rev_s << 16) | rev_e;
- REG_LCD_REV = (inv_s << 16) | inv_e;
- jzfb.cfg |= STFT_REVHI | STFT_SPLHI;
- break;
- }
- case MODE_TFT_SHARP:
- {
- unsigned int total, cls_s, cls_e, ps_s, ps_e;
- unsigned int spl_s, spl_e, rev_s, rev_e;
- total = jzfb.blw + jzfb.w + jzfb.elw + jzfb.hsw;
- spl_s = 1;
- spl_e = spl_s + 1;
- cls_s = 0;
- cls_e = total - 60; /* > 4us (pclk = 80ns) */
- ps_s = cls_s;
- ps_e = cls_e;
- rev_s = total - 40; /* > 3us (pclk = 80ns) */
- rev_e = rev_s + total;
- jzfb.cfg |= STFT_PSHI;
- REG_LCD_SPL = (spl_s << 16) | spl_e;
- REG_LCD_CLS = (cls_s << 16) | cls_e;
- REG_LCD_PS = (ps_s << 16) | ps_e;
- REG_LCD_REV = (rev_s << 16) | rev_e;
- break;
- }
- case MODE_TFT_CASIO:
- break;
- }
-
- /* Configure the LCD panel */
- REG_LCD_CFG = jzfb.cfg;
-
- /* Timing setting */
- __cpm_stop_lcd();
-
- val = jzfb.fclk; /* frame clk */
- if ( (jzfb.cfg & MODE_MASK) != MODE_8BIT_SERIAL_TFT) {
- pclk = val * (jzfb.w + jzfb.hsw + jzfb.elw + jzfb.blw) *
- (jzfb.h + jzfb.vsw + jzfb.efw + jzfb.bfw); /* Pixclk */
- } else {
- /* serial mode: Hsync period = 3*Width_Pixel */
- pclk = val * (jzfb.w*3 + jzfb.hsw + jzfb.elw + jzfb.blw) *
- (jzfb.h + jzfb.vsw + jzfb.efw + jzfb.bfw); /* Pixclk */
- }
-
- if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_SINGLE) ||
- ((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL))
- pclk = (pclk * 3);
-
- if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_SINGLE) ||
- ((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL) ||
- ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_SINGLE) ||
- ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL))
- pclk = pclk >> ((jzfb.cfg & STN_DAT_PINMASK) >> 4);
-
- if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL) ||
- ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL))
- pclk >>= 1;
-
- pll_div = ( REG_CPM_CPCCR & CPM_CPCCR_PCS ); /* clock source,0:pllout/2 1: pllout */
- pll_div = pll_div ? 1 : 2 ;
- val = ( __cpm_get_pllout()/pll_div ) / pclk;
- val--;
- if ( val > 0x1ff ) {
- printf("CPM_LPCDR too large, set it to 0x1ff\n");
- val = 0x1ff;
- }
- __cpm_set_pixdiv(val);
-
- val = pclk * 3 ; /* LCDClock > 2.5*Pixclock */
- if ( val > 150000000 ) {
- printf("Warning: LCDClock=%d\n, LCDClock must less or equal to 150MHz.\n", val);
- printf("Change LCDClock to 150MHz\n");
- val = 150000000;
- }
- val = ( __cpm_get_pllout()/pll_div ) / val;
- val--;
- if ( val > 0x1f ) {
- printf("CPM_CPCCR.LDIV too large, set it to 0x1f\n");
- val = 0x1f;
- }
- __cpm_set_ldiv( val );
- REG_CPM_CPCCR |= CPM_CPCCR_CE ; /* update divide */
-
- __cpm_start_lcd();
- udelay(1000);
-
- REG_LCD_DA0 = fbi->fdadr0; /* frame descripter*/
-
- if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL) ||
- ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL))
- REG_LCD_DA1 = fbi->fdadr1; /* frame descripter*/
-
- return 0;
-}
-
-void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue)
-{
-}
-
-void lcd_initcolregs (void)
-{
-}
diff --git a/package/boot/uboot-xburst/files/cpu/mips/nanonote_gpm940b0.h b/package/boot/uboot-xburst/files/cpu/mips/nanonote_gpm940b0.h
deleted file mode 100644
index 8ff78ad..0000000
--- a/package/boot/uboot-xburst/files/cpu/mips/nanonote_gpm940b0.h
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * JzRISC lcd controller
- *
- * xiangfu liu <xiangfu.z@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __QI_LB60_GPM940B0_H__
-#define __QI_LB60_GPM940B0_H__
-
-#include <asm/io.h>
-
-#define mdelay(n) udelay((n)*1000)
-
-#define NR_PALETTE 256
-
-struct lcd_desc{
- unsigned int next_desc; /* LCDDAx */
- unsigned int databuf; /* LCDSAx */
- unsigned int frame_id; /* LCDFIDx */
- unsigned int cmd; /* LCDCMDx */
-};
-
-#define MODE_MASK 0x0f
-#define MODE_TFT_GEN 0x00
-#define MODE_TFT_SHARP 0x01
-#define MODE_TFT_CASIO 0x02
-#define MODE_TFT_SAMSUNG 0x03
-#define MODE_CCIR656_NONINT 0x04
-#define MODE_CCIR656_INT 0x05
-#define MODE_STN_COLOR_SINGLE 0x08
-#define MODE_STN_MONO_SINGLE 0x09
-#define MODE_STN_COLOR_DUAL 0x0a
-#define MODE_STN_MONO_DUAL 0x0b
-#define MODE_8BIT_SERIAL_TFT 0x0c
-
-#define MODE_TFT_18BIT (1<<7)
-
-#define STN_DAT_PIN1 (0x00 << 4)
-#define STN_DAT_PIN2 (0x01 << 4)
-#define STN_DAT_PIN4 (0x02 << 4)
-#define STN_DAT_PIN8 (0x03 << 4)
-#define STN_DAT_PINMASK STN_DAT_PIN8
-
-#define STFT_PSHI (1 << 15)
-#define STFT_CLSHI (1 << 14)
-#define STFT_SPLHI (1 << 13)
-#define STFT_REVHI (1 << 12)
-
-#define SYNC_MASTER (0 << 16)
-#define SYNC_SLAVE (1 << 16)
-
-#define DE_P (0 << 9)
-#define DE_N (1 << 9)
-
-#define PCLK_P (0 << 10)
-#define PCLK_N (1 << 10)
-
-#define HSYNC_P (0 << 11)
-#define HSYNC_N (1 << 11)
-
-#define VSYNC_P (0 << 8)
-#define VSYNC_N (1 << 8)
-
-#define DATA_NORMAL (0 << 17)
-#define DATA_INVERSE (1 << 17)
-
-
-/* Jz LCDFB supported I/O controls. */
-#define FBIOSETBACKLIGHT 0x4688
-#define FBIODISPON 0x4689
-#define FBIODISPOFF 0x468a
-#define FBIORESET 0x468b
-#define FBIOPRINT_REG 0x468c
-
-/*
- * LCD panel specific definition
- */
-#define MODE 0xc9 /* 8bit serial RGB */
-#define SPEN (32*2+21) /*LCD_SPL */
-#define SPCK (32*2+23) /*LCD_CLS */
-#define SPDA (32*2+22) /*LCD_D12 */
-#define LCD_RET (32*3+27)
-
-#define __spi_write_reg1(reg, val) \
-do { \
- unsigned char no;\
- unsigned short value;\
- unsigned char a=0;\
- unsigned char b=0;\
- a=reg;\
- b=val;\
- __gpio_set_pin(SPEN);\
- __gpio_set_pin(SPCK);\
- __gpio_clear_pin(SPDA);\
- __gpio_clear_pin(SPEN);\
- udelay(25);\
- value=((a<<8)|(b&0xFF));\
- for(no=0;no<16;no++)\
- {\
- __gpio_clear_pin(SPCK);\
- if((value&0x8000)==0x8000)\
- __gpio_set_pin(SPDA);\
- else\
- __gpio_clear_pin(SPDA);\
- udelay(25);\
- __gpio_set_pin(SPCK);\
- value=(value<<1); \
- udelay(25);\
- }\
- __gpio_set_pin(SPEN);\
- udelay(100);\
-} while (0)
-
-#define __spi_write_reg(reg, val) \
-do {\
- __spi_write_reg1((reg<<2|2), val);\
- udelay(100); \
-}while(0)
-
-#define __lcd_special_pin_init() \
-do { \
- __gpio_as_output(SPEN); /* use SPDA */\
- __gpio_as_output(SPCK); /* use SPCK */\
- __gpio_as_output(SPDA); /* use SPDA */\
- __gpio_as_output(LCD_RET);\
-} while (0)
-
-#define __lcd_special_on() \
-do { \
- __spi_write_reg1(0x05, 0x1e); \
- udelay(50);\
- __spi_write_reg1(0x05, 0x5d); \
- __spi_write_reg1(0x0B, 0x81); \
- __spi_write_reg1(0x01, 0x95); \
- __spi_write_reg1(0x00, 0x07); \
- __spi_write_reg1(0x06, 0x15); \
- __spi_write_reg1(0x07, 0x8d); \
- __spi_write_reg1(0x04, 0x0f); \
- __spi_write_reg1(0x0d, 0x3d); \
- __spi_write_reg1(0x10, 0x42); \
- __spi_write_reg1(0x11, 0x3a); \
- __spi_write_reg1(0x05, 0x5f); \
-} while (0)
-
-#define __lcd_special_off() \
-do { \
- __spi_write_reg1(0x05, 0x5e); \
-} while (0)
-
-#define __lcd_display_pin_init() \
-do { \
- __lcd_special_pin_init();\
- __gpio_as_pwm();\
- __lcd_set_backlight_level(8);\
-} while (0)
-
-#define __lcd_display_on() \
-do { \
- __lcd_set_backlight_level(8); \
- __lcd_special_on();\
-} while (0)
-
-#define __lcd_display_off() \
-do { \
- __lcd_set_backlight_level(0); \
- __lcd_special_off();\
-} while (0)
-
-#define __lcd_set_backlight_level(n)\
-do { \
- __gpio_as_output(LCD_RET); \
- __gpio_set_pin(LCD_RET); \
-} while (0)
-
-#if defined(CONFIG_SAKC)
-#define __lcd_close_backlight() \
-do { \
- __gpio_as_output(GPIO_PWM); \
- __gpio_clear_pin(GPIO_PWM); \
-} while (0)
-#endif
-
-#if defined(CONFIG_SAKC)
-#define __lcd_display_pin_init() \
-do { \
- __cpm_start_tcu(); \
- __lcd_special_pin_init(); \
-} while (0)
-
-#define __lcd_display_on() \
-do { \
- __lcd_special_on(); \
-} while (0)
-
-#define __lcd_display_off() \
-do { \
- __lcd_special_off(); \
-} while (0)
-#else
-#define __lcd_display_pin_init() \
-do { \
- __cpm_start_tcu(); \
- __lcd_special_pin_init(); \
-} while (0)
-
-#define __lcd_display_on() \
-do { \
- __gpio_set_pin(GPIO_DISP_OFF_N); \
- __lcd_special_on(); \
-} while (0)
-
-#define __lcd_display_off() \
-do { \
- __lcd_special_off(); \
- __gpio_clear_pin(GPIO_DISP_OFF_N); \
-} while (0)
-#endif
-
-#endif /* __QI_LB60_GPM940B0_H__ */
diff --git a/package/boot/uboot-xburst/files/cpu/mips/usb_boot.S b/package/boot/uboot-xburst/files/cpu/mips/usb_boot.S
deleted file mode 100644
index 107b928..0000000
--- a/package/boot/uboot-xburst/files/cpu/mips/usb_boot.S
+++ /dev/null
@@ -1,880 +0,0 @@
-/*
- * for jz4740 usb boot
- *
- * Copyright (c) 2009 Xiangfu Liu <xiangfu.z@gmail.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
- .set noreorder
- .globl usb_boot
- .text
-
-//----------------------------------------------------------------------
-// Both NAND and USB boot load data to D-Cache first, then transfer
-// data from D-Cache to I-Cache, and jump to execute the code in I-Cache.
-// So init caches first and then dispatch to a proper boot routine.
-//----------------------------------------------------------------------
-
-.macro load_addr reg addr
- li \reg, 0x80000000
- addiu \reg, \reg, \addr
- la $2, usbboot_begin
- subu \reg, \reg, $2
-.endm
-
-usb_boot:
- //--------------------------------------------------------------
- // Initialize PLL: set ICLK to 84MHz and HCLK to 42MHz.
- //--------------------------------------------------------------
- la $9, 0xB0000000 // CPCCR: Clock Control Register
- la $8, 0x42041110 // I:S:M:P=1:2:2:2
- sw $8, 0($9)
-
- la $9, 0xB0000010 // CPPCR: PLL Control Register
- la $8, 0x06000120 // M=12 N=0 D=0 CLK=12*(M+2)/(N+2)
- sw $8, 0($9)
-
- mtc0 $0, $26 // CP0_ERRCTL, restore WST reset state
- nop
-
- mtc0 $0, $16 // CP0_CONFIG
- nop
-
- // Relocate code to beginning of the ram
-
- la $2, usbboot_begin
- la $3, usbboot_end
- li $4, 0x80000000
-
-1:
- lw $5, 0($2)
- sw $5, 0($4)
- addiu $2, $2, 4
- bne $2, $3, 1b
- addiu $4, $4, 4
-
- li $2, 0x80000000
- ori $3, $2, 0
- addiu $3, $3, usbboot_end
- la $4, usbboot_begin
- subu $3, $3, $4
-
-
-2:
- cache 0x0, 0($2) // Index_Invalidate_I
- cache 0x1, 0($2) // Index_Writeback_Inv_D
- addiu $2, $2, 32
- subu $4, $3, $2
- bgtz $4, 2b
- nop
-
- load_addr $3, usb_boot_return
-
- jr $3
-
-usbboot_begin:
-
-init_caches:
- li $2, 3 // cacheable for kseg0 access
- mtc0 $2, $16 // CP0_CONFIG
- nop
-
- li $2, 0x20000000 // enable idx-store-data cache insn
- mtc0 $2, $26 // CP0_ERRCTL
-
- ori $2, $28, 0 // start address
- ori $3, $2, 0x3fe0 // end address, total 16KB
- mtc0 $0, $28, 0 // CP0_TAGLO
- mtc0 $0, $28, 1 // CP0_DATALO
-cache_clear_a_line:
- cache 0x8, 0($2) // Index_Store_Tag_I
- cache 0x9, 0($2) // Index_Store_Tag_D
- bne $2, $3, cache_clear_a_line
- addiu $2, $2, 32 // increment CACHE_LINE_SIZE
-
- ori $2, $28, 0 // start address
- ori $3, $2, 0x3fe0 // end address, total 16KB
- la $4, 0x1ffff000 // physical address and 4KB page mask
-cache_alloc_a_line:
- and $5, $2, $4
- ori $5, $5, 1 // V bit of the physical tag
- mtc0 $5, $28, 0 // CP0_TAGLO
- cache 0x8, 0($2) // Index_Store_Tag_I
- cache 0x9, 0($2) // Index_Store_Tag_D
- bne $2, $3, cache_alloc_a_line
- addiu $2, $2, 32 // increment CACHE_LINE_SIZE
-
- nop
- nop
- nop
- //--------------------------------------------------------------
- // Transfer data from dcache to icache, then jump to icache.
- //
- // Input parameters:
- //
- // $19: data length in bytes
- // $20: jump target address
- //--------------------------------------------------------------
-xfer_d2i:
-
- ori $8, $20, 0
- addu $9, $8, $19 // total 16KB
-
-1:
- cache 0x0, 0($8) // Index_Invalidate_I
- cache 0x1, 0($8) // Index_Writeback_Inv_D
- bne $8, $9, 1b
- addiu $8, $8, 32
-
- // flush write-buffer
- sync
-
- // Invalidate BTB
- mfc0 $8, $16, 7 // CP0_CONFIG
- nop
- ori $8, 2
- mtc0 $8, $16, 7
- nop
-
- // Overwrite config to disable ram initalisation
- li $2, 0xff
- sb $2, 20($20)
-
- jalr $20
- nop
-
-icache_return:
- //--------------------------------------------------------------
- // User code can return to here after executing itself in
- // icache, by jumping to $31.
- //--------------------------------------------------------------
- b usb_boot_return
- nop
-
-
-usb_boot_return:
- //--------------------------------------------------------------
- // Enable the USB PHY
- //--------------------------------------------------------------
- la $9, 0xB0000024 // CPM_SCR
- lw $8, 0($9)
- ori $8, 0x40 // USBPHY_ENABLE
- sw $8, 0($9)
-
- //--------------------------------------------------------------
- // Initialize USB registers
- //--------------------------------------------------------------
- la $27, 0xb3040000 // USB registers base address
-
- sb $0, 0x0b($27) // INTRUSBE: disable common USB interrupts
- sh $0, 0x06($27) // INTRINE: disable EPIN interrutps
- sh $0, 0x08($27) // INTROUTE: disable EPOUT interrutps
-
- li $9, 0x61
- sb $9, 0x01($27) // POWER: HSENAB | SUSPENDM | SOFTCONN
-
- //--------------------------------------------------------------
- // Initialize USB states
- //--------------------------------------------------------------
- li $22, 0 // set EP0 to IDLE state
- li $23, 1 // no data stage
-
- //--------------------------------------------------------------
- // Main loop of polling the usb commands
- //--------------------------------------------------------------
-usb_command_loop:
- lbu $9, 0x0a($27) // read INTRUSB
- andi $9, 0x04 // check USB_INTR_RESET
- beqz $9, check_intr_ep0in
- nop
-
- //--------------------------------------------------------------
- // 1. Handle USB reset interrupt
- //--------------------------------------------------------------
-handle_reset_intr:
- lbu $9, 0x01($27) // read POWER
- andi $9, 0x10 // test HS_MODE
- bnez $9, _usb_set_maxpktsize
- li $9, 512 // max packet size of HS mode
- li $9, 64 // max packet size of FS mode
-
-_usb_set_maxpktsize:
- li $8, 1
- sb $8, 0x0e($27) // set INDEX 1
-
- sh $9, 0x10($27) // INMAXP
- sb $0, 0x13($27) // INCSRH
- sh $9, 0x14($27) // OUTMAXP
- sb $0, 0x17($27) // OUTCSRH
-
-_usb_flush_fifo:
- li $8, 0x48 // INCSR_CDT && INCSR_FF
- sb $8, 0x12($27) // INCSR
- li $8, 0x90 // OUTCSR_CDT && OUTCSR_FF
- sb $8, 0x16($27) // OUTCSR
-
- li $22, 0 // set EP0 to IDLE state
- li $23, 1 // no data stage
-
- //--------------------------------------------------------------
- // 2. Check and handle EP0 interrupt
- //--------------------------------------------------------------
-check_intr_ep0in:
- lhu $10, 0x02($27) // read INTRIN
- andi $9, $10, 0x1 // check EP0 interrupt
- beqz $9, check_intr_ep1in
- nop
-
-handle_ep0_intr:
- sb $0, 0x0e($27) // set INDEX 0
- lbu $11, 0x12($27) // read CSR0
-
- andi $9, $11, 0x04 // check SENTSTALL
- beqz $9, _ep0_setupend
- nop
-
-_ep0_sentstall:
- andi $9, $11, 0xdb
- sb $9, 0x12($27) // clear SENDSTALL and SENTSTALL
- li $22, 0 // set EP0 to IDLE state
-
-_ep0_setupend:
- andi $9, $11, 0x10 // check SETUPEND
- beqz $9, ep0_idle_state
- nop
-
- ori $9, $11, 0x80
- sb $9, 0x12($27) // set SVDSETUPEND
- li $22, 0 // set EP0 to IDLE state
-
-ep0_idle_state:
- bnez $22, ep0_tx_state
- nop
-
- //--------------------------------------------------------------
- // 2.1 Handle EP0 IDLE state interrupt
- //--------------------------------------------------------------
- andi $9, $11, 0x01 // check OUTPKTRDY
- beqz $9, check_intr_ep1in
- nop
-
- //--------------------------------------------------------------
- // Read 8-bytes setup packet from the FIFO
- //--------------------------------------------------------------
- lw $25, 0x20($27) // first word of setup packet
- lw $26, 0x20($27) // second word of setup packet
-
- andi $9, $25, 0x60 // bRequestType & USB_TYPE_MASK
- beqz $9, _ep0_std_req
- nop
-
- //--------------------------------------------------------------
- // 2.1.1 Vendor-specific setup request
- //--------------------------------------------------------------
-_ep0_vend_req:
- li $22, 0 // set EP0 to IDLE state
- li $23, 1 // NoData = 1
-
- andi $9, $25, 0xff00 // check bRequest
- srl $9, $9, 8
- beqz $9, __ep0_get_cpu_info
- sub $8, $9, 0x1
- beqz $8, __ep0_set_data_address
- sub $8, $9, 0x2
- beqz $8, __ep0_set_data_length
- sub $8, $9, 0x3
- beqz $8, __ep0_flush_caches
- sub $8, $9, 0x4
- beqz $8, __ep0_prog_start1
- sub $8, $9, 0x5
- beqz $8, __ep0_prog_start2
- nop
- b _ep0_idle_state_fini // invalid request
- nop
-
-__ep0_get_cpu_info:
- load_addr $20, cpu_info_data // data pointer to transfer
- li $21, 8 // bytes left to transfer
- li $22, 1 // set EP0 to TX state
- li $23, 0 // NoData = 0
-
- b _ep0_idle_state_fini
- nop
-
-__ep0_set_data_address:
- li $9, 0xffff0000
- and $9, $25, $9
- andi $8, $26, 0xffff
- or $20, $9, $8 // data address of next transfer
-
- b _ep0_idle_state_fini
- nop
-
-__ep0_set_data_length:
- li $9, 0xffff0000
- and $9, $25, $9
- andi $8, $26, 0xffff
- or $21, $9, $8 // data length of next transfer
-
- li $9, 0x48 // SVDOUTPKTRDY and DATAEND
- sb $9, 0x12($27) // CSR0
-
- // We must write packet to FIFO before EP1-IN interrupt here.
- b handle_epin1_intr
- nop
-
-__ep0_flush_caches:
- // Flush dcache and invalidate icache.
- li $8, 0x80000000
- addi $9, $8, 0x3fe0 // total 16KB
-
-1:
- cache 0x0, 0($8) // Index_Invalidate_I
- cache 0x1, 0($8) // Index_Writeback_Inv_D
- bne $8, $9, 1b
- addiu $8, $8, 32
-
- // flush write-buffer
- sync
-
- // Invalidate BTB
- mfc0 $8, $16, 7 // CP0_CONFIG
- nop
- ori $8, 2
- mtc0 $8, $16, 7
- nop
-
- b _ep0_idle_state_fini
- nop
-
-__ep0_prog_start1:
- li $9, 0x48 // SVDOUTPKTRDY and DATAEND
- sb $9, 0x12($27) // CSR0
-
- li $9, 0xffff0000
- and $9, $25, $9
- andi $8, $26, 0xffff
- or $20, $9, $8 // target address
-
- b xfer_d2i
- li $19, 0x2000 // 16KB data length
-
-__ep0_prog_start2:
- li $9, 0x48 // SVDOUTPKTRDY and DATAEND
- sb $9, 0x12($27) // CSR0
-
- li $9, 0xffff0000
- and $9, $25, $9
- andi $8, $26, 0xffff
- or $20, $9, $8 // target address
-
- jalr $20 // jump, and place the return address in $31
- nop
-
-__ep0_prog_start2_return:
- // User code can return to here after executing itself, by jumping to $31.
- b usb_boot_return
- nop
-
- //--------------------------------------------------------------
- // 2.1.2 Standard setup request
- //--------------------------------------------------------------
-_ep0_std_req:
- andi $12, $25, 0xff00 // check bRequest
- srl $12, $12, 8
- sub $9, $12, 0x05 // check USB_REQ_SET_ADDRESS
- bnez $9, __ep0_req_set_config
- nop
-
- //--------------------------------------------------------------
- // Handle USB_REQ_SET_ADDRESS
- //--------------------------------------------------------------
-__ep0_req_set_addr:
- srl $9, $25, 16 // get wValue
- sb $9, 0x0($27) // set FADDR
- li $23, 1 // NoData = 1
- b _ep0_idle_state_fini
- nop
-
-__ep0_req_set_config:
- sub $9, $12, 0x09 // check USB_REQ_SET_CONFIGURATION
- bnez $9, __ep0_req_get_desc
- nop
-
- //--------------------------------------------------------------
- // Handle USB_REQ_SET_CONFIGURATION
- //--------------------------------------------------------------
- li $23, 1 // NoData = 1
- b _ep0_idle_state_fini
- nop
-
-__ep0_req_get_desc:
- sub $9, $12, 0x06 // check USB_REQ_GET_DESCRIPTOR
- bnez $9, _ep0_idle_state_fini
- li $23, 1 // NoData = 1
-
- //--------------------------------------------------------------
- // Handle USB_REQ_GET_DESCRIPTOR
- //--------------------------------------------------------------
- li $23, 0 // NoData = 0
-
- srl $9, $25, 24 // wValue >> 8
- sub $8, $9, 0x01 // check USB_DT_DEVICE
- beqz $8, ___ep0_get_dev_desc
- srl $21, $26, 16 // get wLength
- sub $8, $9, 0x02 // check USB_DT_CONFIG
- beqz $8, ___ep0_get_conf_desc
- sub $8, $9, 0x03 // check USB_DT_STRING
- beqz $8, ___ep0_get_string_desc
- sub $8, $9, 0x06 // check USB_DT_DEVICE_QUALIFIER
- beqz $8, ___ep0_get_dev_qualifier
- nop
- b _ep0_idle_state_fini
- nop
-
-___ep0_get_dev_desc:
- load_addr $20, device_desc // data pointer
- li $22, 1 // set EP0 to TX state
- sub $8, $21, 18
- blez $8, _ep0_idle_state_fini // wLength <= 18
- nop
- li $21, 18 // max length of device_desc
- b _ep0_idle_state_fini
- nop
-
-___ep0_get_dev_qualifier:
- load_addr $20, dev_qualifier // data pointer
- li $22, 1 // set EP0 to TX state
- sub $8, $21, 10
- blez $8, _ep0_idle_state_fini // wLength <= 10
- nop
- li $21, 10 // max length of dev_qualifier
- b _ep0_idle_state_fini
- nop
-
-___ep0_get_conf_desc:
- load_addr $20, config_desc_fs // data pointer of FS mode
- lbu $8, 0x01($27) // read POWER
- andi $8, 0x10 // test HS_MODE
- beqz $8, ___ep0_get_conf_desc2
- nop
- load_addr $20, config_desc_hs // data pointer of HS mode
-
-___ep0_get_conf_desc2:
- li $22, 1 // set EP0 to TX state
- sub $8, $21, 32
- blez $8, _ep0_idle_state_fini // wLength <= 32
- nop
- li $21, 32 // max length of config_desc
- b _ep0_idle_state_fini
- nop
-
-___ep0_get_string_desc:
- li $22, 1 // set EP0 to TX state
-
- srl $9, $25, 16 // wValue & 0xff
- andi $9, 0xff
-
- sub $8, $9, 1
- beqz $8, ___ep0_get_string_manufacture
- sub $8, $9, 2
- beqz $8, ___ep0_get_string_product
- nop
-
-___ep0_get_string_lang_ids:
- load_addr $20, string_lang_ids // data pointer
- b _ep0_idle_state_fini
- li $21, 4 // data length
-
-___ep0_get_string_manufacture:
- load_addr $20, string_manufacture // data pointer
- b _ep0_idle_state_fini
- li $21, 16 // data length
-
-___ep0_get_string_product:
- load_addr $20, string_product // data pointer
- b _ep0_idle_state_fini
- li $21, 46 // data length
-
-_ep0_idle_state_fini:
- li $9, 0x40 // SVDOUTPKTRDY
- beqz $23, _ep0_idle_state_fini2
- nop
- ori $9, $9, 0x08 // DATAEND
-_ep0_idle_state_fini2:
- sb $9, 0x12($27) // CSR0
- beqz $22, check_intr_ep1in
- nop
-
- //--------------------------------------------------------------
- // 2.2 Handle EP0 TX state interrupt
- //--------------------------------------------------------------
-ep0_tx_state:
- sub $9, $22, 1
- bnez $9, check_intr_ep1in
- nop
-
- sub $9, $21, 64 // max packetsize
- blez $9, _ep0_tx_state2 // data count <= 64
- ori $19, $21, 0
- li $19, 64
-
-_ep0_tx_state2:
- beqz $19, _ep0_tx_state3 // send ZLP
- ori $18, $19, 0 // record bytes to be transferred
- sub $21, $21, $19 // decrement data count
-
-_ep0_fifo_write_loop:
- lbu $9, 0($20) // read data
- sb $9, 0x20($27) // load FIFO
- sub $19, $19, 1 // decrement counter
- bnez $19, _ep0_fifo_write_loop
- addi $20, $20, 1 // increment data pointer
-
- sub $9, $18, 64 // max packetsize
- beqz $9, _ep0_tx_state4
- nop
-
-_ep0_tx_state3:
- // transferred bytes < max packetsize
- li $9, 0x0a // set INPKTRDY and DATAEND
- sb $9, 0x12($27) // CSR0
- li $22, 0 // set EP0 to IDLE state
- b check_intr_ep1in
- nop
-
-_ep0_tx_state4:
- // transferred bytes == max packetsize
- li $9, 0x02 // set INPKTRDY
- sb $9, 0x12($27) // CSR0
- b check_intr_ep1in
- nop
-
- //--------------------------------------------------------------
- // 3. Check and handle EP1 BULK-IN interrupt
- //--------------------------------------------------------------
-check_intr_ep1in:
- andi $9, $10, 0x2 // check EP1 IN interrupt
- beqz $9, check_intr_ep1out
- nop
-
-handle_epin1_intr:
- li $9, 1
- sb $9, 0x0e($27) // set INDEX 1
- lbu $9, 0x12($27) // read INCSR
-
- andi $8, $9, 0x2 // check INCSR_FFNOTEMPT
- bnez $8, _epin1_tx_state4
- nop
-
-_epin1_write_fifo:
- lhu $9, 0x10($27) // get INMAXP
- sub $8, $21, $9
- blez $8, _epin1_tx_state1 // bytes left <= INMAXP
- ori $19, $21, 0
- ori $19, $9, 0
-
-_epin1_tx_state1:
- beqz $19, _epin1_tx_state4 // No data
- nop
-
- sub $21, $21, $19 // decrement data count
-
- srl $5, $19, 2 // # of word
- andi $6, $19, 0x3 // # of byte
- beqz $5, _epin1_tx_state2
- nop
-
-_epin1_fifo_write_word:
- lw $9, 0($20) // read data from source address
- sw $9, 0x24($27) // write FIFO
- sub $5, $5, 1 // decrement counter
- bnez $5, _epin1_fifo_write_word
- addiu $20, $20, 4 // increment dest address
-
-_epin1_tx_state2:
- beqz $6, _epin1_tx_state3
- nop
-
-_epin1_fifo_write_byte:
- lbu $9, 0($20) // read data from source address
- sb $9, 0x24($27) // write FIFO
- sub $6, $6, 1 // decrement counter
- bnez $6, _epin1_fifo_write_byte
- addiu $20, $20, 1 // increment dest address
-
-_epin1_tx_state3:
- li $9, 0x1
- sb $9, 0x12($27) // INCSR, set INPKTRDY
-
-_epin1_tx_state4:
- // nop
-
- //--------------------------------------------------------------
- // 4. Check and handle EP1 BULK-OUT interrupt
- //--------------------------------------------------------------
-check_intr_ep1out:
- lhu $9, 0x04($27) // read INTROUT
- andi $9, 0x2
- beqz $9, check_status_next
- nop
-
-handle_epout1_intr:
- li $9, 1
- sb $9, 0x0e($27) // set INDEX 1
-
- lbu $9, 0x16($27) // read OUTCSR
- andi $9, 0x1 // check OUTPKTRDY
- beqz $9, check_status_next
- nop
-
-_epout1_read_fifo:
- lhu $19, 0x18($27) // read OUTCOUNT
- srl $5, $19, 2 // # of word
- andi $6, $19, 0x3 // # of byte
- beqz $5, _epout1_rx_state1
- nop
-
-_epout1_fifo_read_word:
- lw $9, 0x24($27) // read FIFO
- sw $9, 0($20) // store to dest address
- sub $5, $5, 1 // decrement counter
- bnez $5, _epout1_fifo_read_word
- addiu $20, $20, 4 // increment dest address
-
-_epout1_rx_state1:
- beqz $6, _epout1_rx_state2
- nop
-
-_epout1_fifo_read_byte:
- lbu $9, 0x24($27) // read FIFO
- sb $9, 0($20) // store to dest address
- sub $6, $6, 1 // decrement counter
- bnez $6, _epout1_fifo_read_byte
- addiu $20, $20, 1 // increment dest address
-
-_epout1_rx_state2:
- sb $0, 0x16($27) // clear OUTPKTRDY
-
-check_status_next:
- b usb_command_loop
- nop
-
-//--------------------------------------------------------------
-// Device/Configuration/Interface/Endpoint/String Descriptors
-//--------------------------------------------------------------
-
- .align 2
-device_desc:
- .byte 0x12 // bLength
- .byte 0x01 // bDescriptorType
- .byte 0x00 // bcdUSB
- .byte 0x02 // bcdUSB
- .byte 0x00 // bDeviceClass
- .byte 0x00 // bDeviceSubClass
- .byte 0x00 // bDeviceProtocol
- .byte 0x40 // bMaxPacketSize0
- .byte 0x1a // idVendor
- .byte 0x60 // idVendor
- .byte 0x40 // idProduct
- .byte 0x47 // idProduct
- .byte 0x00 // bcdDevice
- .byte 0x01 // bcdDevice
- .byte 0x01 // iManufacturer
- .byte 0x02 // iProduct
- .byte 0x00 // iSerialNumber
- .byte 0x01 // bNumConfigurations
-
- .align 2
-dev_qualifier:
- .byte 0x0a // bLength
- .byte 0x06 // bDescriptorType
- .byte 0x00 // bcdUSB
- .byte 0x02 // bcdUSB
- .byte 0x00 // bDeviceClass
- .byte 0x00 // bDeviceSubClass
- .byte 0x00 // bDeviceProtocol
- .byte 0x40 // bMaxPacketSize0
- .byte 0x01 // bNumConfigurations
- .byte 0x00 // bRESERVED
-
- .align 2
-config_desc_hs:
- .byte 0x09 // bLength
- .byte 0x02 // bDescriptorType
- .byte 0x20 // wTotalLength
- .byte 0x00 // wTotalLength
- .byte 0x01 // bNumInterfaces
- .byte 0x01 // bConfigurationValue
- .byte 0x00 // iConfiguration
- .byte 0xc0 // bmAttributes
- .byte 0x01 // MaxPower
-intf_desc_hs:
- .byte 0x09 // bLength
- .byte 0x04 // bDescriptorType
- .byte 0x00 // bInterfaceNumber
- .byte 0x00 // bAlternateSetting
- .byte 0x02 // bNumEndpoints
- .byte 0xff // bInterfaceClass
- .byte 0x00 // bInterfaceSubClass
- .byte 0x50 // bInterfaceProtocol
- .byte 0x00 // iInterface
-ep1_desc_hs:
- .byte 0x07 // bLength
- .byte 0x05 // bDescriptorType
- .byte 0x01 // bEndpointAddress
- .byte 0x02 // bmAttributes
- .byte 0x00 // wMaxPacketSize
- .byte 0x02 // wMaxPacketSize
- .byte 0x00 // bInterval
-ep2_desc_hs:
- .byte 0x07 // bLength
- .byte 0x05 // bDescriptorType
- .byte 0x81 // bEndpointAddress
- .byte 0x02 // bmAttributes
- .byte 0x00 // wMaxPacketSize
- .byte 0x02 // wMaxPacketSize
- .byte 0x00 // bInterval
-
- .align 2
-config_desc_fs:
- .byte 0x09 // bLength
- .byte 0x02 // bDescriptorType
- .byte 0x20 // wTotalLength
- .byte 0x00 // wTotalLength
- .byte 0x01 // bNumInterfaces
- .byte 0x01 // bConfigurationValue
- .byte 0x00 // iConfiguration
- .byte 0xc0 // bmAttributes
- .byte 0x01 // MaxPower
-intf_desc_fs:
- .byte 0x09 // bLength
- .byte 0x04 // bDescriptorType
- .byte 0x00 // bInterfaceNumber
- .byte 0x00 // bAlternateSetting
- .byte 0x02 // bNumEndpoints
- .byte 0xff // bInterfaceClass
- .byte 0x00 // bInterfaceSubClass
- .byte 0x50 // bInterfaceProtocol
- .byte 0x00 // iInterface
-ep1_desc_fs:
- .byte 0x07 // bLength
- .byte 0x05 // bDescriptorType
- .byte 0x01 // bEndpointAddress
- .byte 0x02 // bmAttributes
- .byte 0x40 // wMaxPacketSize
- .byte 0x00 // wMaxPacketSize
- .byte 0x00 // bInterval
-ep2_desc_fs:
- .byte 0x07 // bLength
- .byte 0x05 // bDescriptorType
- .byte 0x81 // bEndpointAddress
- .byte 0x02 // bmAttributes
- .byte 0x40 // wMaxPacketSize
- .byte 0x00 // wMaxPacketSize
- .byte 0x00 // bInterval
-
- .align 2
-string_lang_ids:
- .byte 0x04
- .byte 0x03
- .byte 0x09
- .byte 0x04
-
- .align 2
-string_manufacture:
- .byte 0x10
- .byte 0x03
- .byte 0x49
- .byte 0x00
- .byte 0x6e
- .byte 0x00
- .byte 0x67
- .byte 0x00
- .byte 0x65
- .byte 0x00
- .byte 0x6e
- .byte 0x00
- .byte 0x69
- .byte 0x00
- .byte 0x63
- .byte 0x00
-
- .align 2
-string_product:
- .byte 0x2e
- .byte 0x03
- .byte 0x4a
- .byte 0x00
- .byte 0x5a
- .byte 0x00
- .byte 0x34
- .byte 0x00
- .byte 0x37
- .byte 0x00
- .byte 0x34
- .byte 0x00
- .byte 0x30
- .byte 0x00
- .byte 0x20
- .byte 0x00
- .byte 0x55
- .byte 0x00
- .byte 0x53
- .byte 0x00
- .byte 0x42
- .byte 0x00
- .byte 0x20
- .byte 0x00
- .byte 0x42
- .byte 0x00
- .byte 0x6f
- .byte 0x00
- .byte 0x6f
- .byte 0x00
- .byte 0x74
- .byte 0x00
- .byte 0x20
- .byte 0x00
- .byte 0x44
- .byte 0x00
- .byte 0x65
- .byte 0x00
- .byte 0x76
- .byte 0x00
- .byte 0x69
- .byte 0x00
- .byte 0x63
- .byte 0x00
- .byte 0x65
- .byte 0x00
-
- .align 2
-cpu_info_data:
- .byte 0x4a
- .byte 0x5a
- .byte 0x34
- .byte 0x37
- .byte 0x34
- .byte 0x30
- .byte 0x56
- .byte 0x31
-usbboot_end:
-
- .set reorder
diff --git a/package/boot/uboot-xburst/files/include/asm-mips/jz4740.h b/package/boot/uboot-xburst/files/include/asm-mips/jz4740.h
deleted file mode 100644
index 4098873..0000000
--- a/package/boot/uboot-xburst/files/include/asm-mips/jz4740.h
+++ /dev/null
@@ -1,4892 +0,0 @@
-/*
- * Include file for Ingenic Semiconductor's JZ4740 CPU.
- */
-#ifndef __JZ4740_H__
-#define __JZ4740_H__
-
-#ifndef __ASSEMBLY__
-#define UCOS_CSP 0
-
-#if UCOS_CSP
-#define __KERNEL__
-#include <bsp.h>
-#include <types.h>
-
-#include <sysdefs.h>
-#include <cacheops.h>
-#define KSEG0 KSEG0BASE
-#else
-#include <asm/addrspace.h>
-#include <asm/cacheops.h>
-#endif
-
-#define cache_unroll(base,op) \
- __asm__ __volatile__(" \
- .set noreorder; \
- .set mips3; \
- cache %1, (%0); \
- .set mips0; \
- .set reorder" \
- : \
- : "r" (base), \
- "i" (op));
-
-static inline void jz_flush_dcache(void)
-{
- unsigned long start;
- unsigned long end;
-
- start = KSEG0;
- end = start + CONFIG_SYS_DCACHE_SIZE;
- while (start < end) {
- cache_unroll(start,Index_Writeback_Inv_D);
- start += CONFIG_SYS_CACHELINE_SIZE;
- }
-}
-
-static inline void jz_flush_icache(void)
-{
- unsigned long start;
- unsigned long end;
-
- start = KSEG0;
- end = start + CONFIG_SYS_ICACHE_SIZE;
- while(start < end) {
- cache_unroll(start,Index_Invalidate_I);
- start += CONFIG_SYS_CACHELINE_SIZE;
- }
-}
-
-/* cpu pipeline flush */
-static inline void jz_sync(void)
-{
- __asm__ volatile ("sync");
-}
-
-static inline void jz_writeb(u32 address, u8 value)
-{
- *((volatile u8 *)address) = value;
-}
-
-static inline void jz_writew(u32 address, u16 value)
-{
- *((volatile u16 *)address) = value;
-}
-
-static inline void jz_writel(u32 address, u32 value)
-{
- *((volatile u32 *)address) = value;
-}
-
-static inline u8 jz_readb(u32 address)
-{
- return *((volatile u8 *)address);
-}
-
-static inline u16 jz_readw(u32 address)
-{
- return *((volatile u16 *)address);
-}
-
-static inline u32 jz_readl(u32 address)
-{
- return *((volatile u32 *)address);
-}
-
-#define REG8(addr) *((volatile u8 *)(addr))
-#define REG16(addr) *((volatile u16 *)(addr))
-#define REG32(addr) *((volatile u32 *)(addr))
-
-#else
-
-#define REG8(addr) (addr)
-#define REG16(addr) (addr)
-#define REG32(addr) (addr)
-
-#endif /* !ASSEMBLY */
-
-/* Boot ROM Specification */
-/* NOR Boot config */
-#define JZ4740_NORBOOT_8BIT 0x00000000 /* 8-bit data bus flash */
-#define JZ4740_NORBOOT_16BIT 0x10101010 /* 16-bit data bus flash */
-#define JZ4740_NORBOOT_32BIT 0x20202020 /* 32-bit data bus flash */
-
-/* NAND Boot config */
-#define JZ4740_NANDBOOT_B8R3 0xffffffff /* 8-bit bus & 3 row cycles */
-#define JZ4740_NANDBOOT_B8R2 0xf0f0f0f0 /* 8-bit bus & 2 row cycles */
-#define JZ4740_NANDBOOT_B16R3 0x0f0f0f0f /* 16-bit bus & 3 row cycles */
-#define JZ4740_NANDBOOT_B16R2 0x00000000 /* 16-bit bus & 2 row cycles */
-
-
-/* Register Definitions */
-#define CPM_BASE 0xB0000000
-#define INTC_BASE 0xB0001000
-#define TCU_BASE 0xB0002000
-#define WDT_BASE 0xB0002000
-#define RTC_BASE 0xB0003000
-#define GPIO_BASE 0xB0010000
-#define AIC_BASE 0xB0020000
-#define ICDC_BASE 0xB0020000
-#define MSC_BASE 0xB0021000
-#define UART0_BASE 0xB0030000
-#define I2C_BASE 0xB0042000
-#define SSI_BASE 0xB0043000
-#define SADC_BASE 0xB0070000
-#define EMC_BASE 0xB3010000
-#define DMAC_BASE 0xB3020000
-#define UHC_BASE 0xB3030000
-#define UDC_BASE 0xB3040000
-#define LCD_BASE 0xB3050000
-#define SLCD_BASE 0xB3050000
-#define CIM_BASE 0xB3060000
-#define ETH_BASE 0xB3100000
-
-
-/*
- * INTC (Interrupt Controller)
- */
-#define INTC_ISR (INTC_BASE + 0x00)
-#define INTC_IMR (INTC_BASE + 0x04)
-#define INTC_IMSR (INTC_BASE + 0x08)
-#define INTC_IMCR (INTC_BASE + 0x0c)
-#define INTC_IPR (INTC_BASE + 0x10)
-
-#define REG_INTC_ISR REG32(INTC_ISR)
-#define REG_INTC_IMR REG32(INTC_IMR)
-#define REG_INTC_IMSR REG32(INTC_IMSR)
-#define REG_INTC_IMCR REG32(INTC_IMCR)
-#define REG_INTC_IPR REG32(INTC_IPR)
-
-/* 1st-level interrupts */
-#define IRQ_I2C 1
-#define IRQ_UHC 3
-#define IRQ_UART0 9
-#define IRQ_SADC 12
-#define IRQ_MSC 14
-#define IRQ_RTC 15
-#define IRQ_SSI 16
-#define IRQ_CIM 17
-#define IRQ_AIC 18
-#define IRQ_ETH 19
-#define IRQ_DMAC 20
-#define IRQ_TCU2 21
-#define IRQ_TCU1 22
-#define IRQ_TCU0 23
-#define IRQ_UDC 24
-#define IRQ_GPIO3 25
-#define IRQ_GPIO2 26
-#define IRQ_GPIO1 27
-#define IRQ_GPIO0 28
-#define IRQ_IPU 29
-#define IRQ_LCD 30
-
-/* 2nd-level interrupts */
-#define IRQ_DMA_0 32 /* 32 to 37 for DMAC channel 0 to 5 */
-#define IRQ_GPIO_0 48 /* 48 to 175 for GPIO pin 0 to 127 */
-
-
-/*
- * RTC
- */
-#define RTC_RCR (RTC_BASE + 0x00) /* RTC Control Register */
-#define RTC_RSR (RTC_BASE + 0x04) /* RTC Second Register */
-#define RTC_RSAR (RTC_BASE + 0x08) /* RTC Second Alarm Register */
-#define RTC_RGR (RTC_BASE + 0x0c) /* RTC Regulator Register */
-
-#define RTC_HCR (RTC_BASE + 0x20) /* Hibernate Control Register */
-#define RTC_HWFCR (RTC_BASE + 0x24) /* Hibernate Wakeup Filter Counter Reg */
-#define RTC_HRCR (RTC_BASE + 0x28) /* Hibernate Reset Counter Register */
-#define RTC_HWCR (RTC_BASE + 0x2c) /* Hibernate Wakeup Control Register */
-#define RTC_HWRSR (RTC_BASE + 0x30) /* Hibernate Wakeup Status Register */
-#define RTC_HSPR (RTC_BASE + 0x34) /* Hibernate Scratch Pattern Register */
-
-#define REG_RTC_RCR REG32(RTC_RCR)
-#define REG_RTC_RSR REG32(RTC_RSR)
-#define REG_RTC_RSAR REG32(RTC_RSAR)
-#define REG_RTC_RGR REG32(RTC_RGR)
-#define REG_RTC_HCR REG32(RTC_HCR)
-#define REG_RTC_HWFCR REG32(RTC_HWFCR)
-#define REG_RTC_HRCR REG32(RTC_HRCR)
-#define REG_RTC_HWCR REG32(RTC_HWCR)
-#define REG_RTC_HWRSR REG32(RTC_HWRSR)
-#define REG_RTC_HSPR REG32(RTC_HSPR)
-
-/* RTC Control Register */
-#define RTC_RCR_WRDY (1 << 7) /* Write Ready Flag */
-#define RTC_RCR_HZ (1 << 6) /* 1Hz Flag */
-#define RTC_RCR_HZIE (1 << 5) /* 1Hz Interrupt Enable */
-#define RTC_RCR_AF (1 << 4) /* Alarm Flag */
-#define RTC_RCR_AIE (1 << 3) /* Alarm Interrupt Enable */
-#define RTC_RCR_AE (1 << 2) /* Alarm Enable */
-#define RTC_RCR_RTCE (1 << 0) /* RTC Enable */
-
-/* RTC Regulator Register */
-#define RTC_RGR_LOCK (1 << 31) /* Lock Bit */
-#define RTC_RGR_ADJC_BIT 16
-#define RTC_RGR_ADJC_MASK (0x3ff << RTC_RGR_ADJC_BIT)
-#define RTC_RGR_NC1HZ_BIT 0
-#define RTC_RGR_NC1HZ_MASK (0xffff << RTC_RGR_NC1HZ_BIT)
-
-/* Hibernate Control Register */
-#define RTC_HCR_PD (1 << 0) /* Power Down */
-
-/* Hibernate Wakeup Filter Counter Register */
-#define RTC_HWFCR_BIT 5
-#define RTC_HWFCR_MASK (0x7ff << RTC_HWFCR_BIT)
-
-/* Hibernate Reset Counter Register */
-#define RTC_HRCR_BIT 5
-#define RTC_HRCR_MASK (0x7f << RTC_HRCR_BIT)
-
-/* Hibernate Wakeup Control Register */
-#define RTC_HWCR_EALM (1 << 0) /* RTC alarm wakeup enable */
-
-/* Hibernate Wakeup Status Register */
-#define RTC_HWRSR_HR (1 << 5) /* Hibernate reset */
-#define RTC_HWRSR_PPR (1 << 4) /* PPR reset */
-#define RTC_HWRSR_PIN (1 << 1) /* Wakeup pin status bit */
-#define RTC_HWRSR_ALM (1 << 0) /* RTC alarm status bit */
-
-
-/*************************************************************************
- * CPM (Clock reset and Power control Management)
- *************************************************************************/
-#define CPM_CPCCR (CPM_BASE+0x00)
-#define CPM_CPPCR (CPM_BASE+0x10)
-#define CPM_I2SCDR (CPM_BASE+0x60)
-#define CPM_LPCDR (CPM_BASE+0x64)
-#define CPM_MSCCDR (CPM_BASE+0x68)
-#define CPM_UHCCDR (CPM_BASE+0x6C)
-
-#define CPM_LCR (CPM_BASE+0x04)
-#define CPM_CLKGR (CPM_BASE+0x20)
-#define CPM_SCR (CPM_BASE+0x24)
-
-#define CPM_HCR (CPM_BASE+0x30)
-#define CPM_HWFCR (CPM_BASE+0x34)
-#define CPM_HRCR (CPM_BASE+0x38)
-#define CPM_HWCR (CPM_BASE+0x3c)
-#define CPM_HWSR (CPM_BASE+0x40)
-#define CPM_HSPR (CPM_BASE+0x44)
-
-#define CPM_RSR (CPM_BASE+0x08)
-
-
-#define REG_CPM_CPCCR REG32(CPM_CPCCR)
-#define REG_CPM_CPPCR REG32(CPM_CPPCR)
-#define REG_CPM_I2SCDR REG32(CPM_I2SCDR)
-#define REG_CPM_LPCDR REG32(CPM_LPCDR)
-#define REG_CPM_MSCCDR REG32(CPM_MSCCDR)
-#define REG_CPM_UHCCDR REG32(CPM_UHCCDR)
-
-#define REG_CPM_LCR REG32(CPM_LCR)
-#define REG_CPM_CLKGR REG32(CPM_CLKGR)
-#define REG_CPM_SCR REG32(CPM_SCR)
-#define REG_CPM_HCR REG32(CPM_HCR)
-#define REG_CPM_HWFCR REG32(CPM_HWFCR)
-#define REG_CPM_HRCR REG32(CPM_HRCR)
-#define REG_CPM_HWCR REG32(CPM_HWCR)
-#define REG_CPM_HWSR REG32(CPM_HWSR)
-#define REG_CPM_HSPR REG32(CPM_HSPR)
-
-#define REG_CPM_RSR REG32(CPM_RSR)
-
-
-/* Clock Control Register */
-#define CPM_CPCCR_I2CS (1 << 31)
-#define CPM_CPCCR_CLKOEN (1 << 30)
-#define CPM_CPCCR_UCS (1 << 29)
-#define CPM_CPCCR_UDIV_BIT 23
-#define CPM_CPCCR_UDIV_MASK (0x3f << CPM_CPCCR_UDIV_BIT)
-#define CPM_CPCCR_CE (1 << 22)
-#define CPM_CPCCR_PCS (1 << 21)
-#define CPM_CPCCR_LDIV_BIT 16
-#define CPM_CPCCR_LDIV_MASK (0x1f << CPM_CPCCR_LDIV_BIT)
-#define CPM_CPCCR_MDIV_BIT 12
-#define CPM_CPCCR_MDIV_MASK (0x0f << CPM_CPCCR_MDIV_BIT)
-#define CPM_CPCCR_PDIV_BIT 8
-#define CPM_CPCCR_PDIV_MASK (0x0f << CPM_CPCCR_PDIV_BIT)
-#define CPM_CPCCR_HDIV_BIT 4
-#define CPM_CPCCR_HDIV_MASK (0x0f << CPM_CPCCR_HDIV_BIT)
-#define CPM_CPCCR_CDIV_BIT 0
-#define CPM_CPCCR_CDIV_MASK (0x0f << CPM_CPCCR_CDIV_BIT)
-
-/* I2S Clock Divider Register */
-#define CPM_I2SCDR_I2SDIV_BIT 0
-#define CPM_I2SCDR_I2SDIV_MASK (0x1ff << CPM_I2SCDR_I2SDIV_BIT)
-
-/* LCD Pixel Clock Divider Register */
-#define CPM_LPCDR_PIXDIV_BIT 0
-#define CPM_LPCDR_PIXDIV_MASK (0x1ff << CPM_LPCDR_PIXDIV_BIT)
-
-/* MSC Clock Divider Register */
-#define CPM_MSCCDR_MSCDIV_BIT 0
-#define CPM_MSCCDR_MSCDIV_MASK (0x1f << CPM_MSCCDR_MSCDIV_BIT)
-
-/* PLL Control Register */
-#define CPM_CPPCR_PLLM_BIT 23
-#define CPM_CPPCR_PLLM_MASK (0x1ff << CPM_CPPCR_PLLM_BIT)
-#define CPM_CPPCR_PLLN_BIT 18
-#define CPM_CPPCR_PLLN_MASK (0x1f << CPM_CPPCR_PLLN_BIT)
-#define CPM_CPPCR_PLLOD_BIT 16
-#define CPM_CPPCR_PLLOD_MASK (0x03 << CPM_CPPCR_PLLOD_BIT)
-#define CPM_CPPCR_PLLS (1 << 10)
-#define CPM_CPPCR_PLLBP (1 << 9)
-#define CPM_CPPCR_PLLEN (1 << 8)
-#define CPM_CPPCR_PLLST_BIT 0
-#define CPM_CPPCR_PLLST_MASK (0xff << CPM_CPPCR_PLLST_BIT)
-
-/* Low Power Control Register */
-#define CPM_LCR_DOZE_DUTY_BIT 3
-#define CPM_LCR_DOZE_DUTY_MASK (0x1f << CPM_LCR_DOZE_DUTY_BIT)
-#define CPM_LCR_DOZE_ON (1 << 2)
-#define CPM_LCR_LPM_BIT 0
-#define CPM_LCR_LPM_MASK (0x3 << CPM_LCR_LPM_BIT)
- #define CPM_LCR_LPM_IDLE (0x0 << CPM_LCR_LPM_BIT)
- #define CPM_LCR_LPM_SLEEP (0x1 << CPM_LCR_LPM_BIT)
-
-/* Clock Gate Register */
-#define CPM_CLKGR_UART1 (1 << 15)
-#define CPM_CLKGR_UHC (1 << 14)
-#define CPM_CLKGR_IPU (1 << 13)
-#define CPM_CLKGR_DMAC (1 << 12)
-#define CPM_CLKGR_UDC (1 << 11)
-#define CPM_CLKGR_LCD (1 << 10)
-#define CPM_CLKGR_CIM (1 << 9)
-#define CPM_CLKGR_SADC (1 << 8)
-#define CPM_CLKGR_MSC (1 << 7)
-#define CPM_CLKGR_AIC1 (1 << 6)
-#define CPM_CLKGR_AIC2 (1 << 5)
-#define CPM_CLKGR_SSI (1 << 4)
-#define CPM_CLKGR_I2C (1 << 3)
-#define CPM_CLKGR_RTC (1 << 2)
-#define CPM_CLKGR_TCU (1 << 1)
-#define CPM_CLKGR_UART0 (1 << 0)
-
-/* Sleep Control Register */
-#define CPM_SCR_O1ST_BIT 8
-#define CPM_SCR_O1ST_MASK (0xff << CPM_SCR_O1ST_BIT)
-#define CPM_SCR_UDCPHY_ENABLE (1 << 6)
-#define CPM_SCR_USBPHY_DISABLE (1 << 7)
-#define CPM_SCR_OSC_ENABLE (1 << 4)
-
-/* Hibernate Control Register */
-#define CPM_HCR_PD (1 << 0)
-
-/* Wakeup Filter Counter Register in Hibernate Mode */
-#define CPM_HWFCR_TIME_BIT 0
-#define CPM_HWFCR_TIME_MASK (0x3ff << CPM_HWFCR_TIME_BIT)
-
-/* Reset Counter Register in Hibernate Mode */
-#define CPM_HRCR_TIME_BIT 0
-#define CPM_HRCR_TIME_MASK (0x7f << CPM_HRCR_TIME_BIT)
-
-/* Wakeup Control Register in Hibernate Mode */
-#define CPM_HWCR_WLE_LOW (0 << 2)
-#define CPM_HWCR_WLE_HIGH (1 << 2)
-#define CPM_HWCR_PIN_WAKEUP (1 << 1)
-#define CPM_HWCR_RTC_WAKEUP (1 << 0)
-
-/* Wakeup Status Register in Hibernate Mode */
-#define CPM_HWSR_WSR_PIN (1 << 1)
-#define CPM_HWSR_WSR_RTC (1 << 0)
-
-/* Reset Status Register */
-#define CPM_RSR_HR (1 << 2)
-#define CPM_RSR_WR (1 << 1)
-#define CPM_RSR_PR (1 << 0)
-
-
-/*************************************************************************
- * TCU (Timer Counter Unit)
- *************************************************************************/
-#define TCU_TSR (TCU_BASE + 0x1C) /* Timer Stop Register */
-#define TCU_TSSR (TCU_BASE + 0x2C) /* Timer Stop Set Register */
-#define TCU_TSCR (TCU_BASE + 0x3C) /* Timer Stop Clear Register */
-#define TCU_TER (TCU_BASE + 0x10) /* Timer Counter Enable Register */
-#define TCU_TESR (TCU_BASE + 0x14) /* Timer Counter Enable Set Register */
-#define TCU_TECR (TCU_BASE + 0x18) /* Timer Counter Enable Clear Register */
-#define TCU_TFR (TCU_BASE + 0x20) /* Timer Flag Register */
-#define TCU_TFSR (TCU_BASE + 0x24) /* Timer Flag Set Register */
-#define TCU_TFCR (TCU_BASE + 0x28) /* Timer Flag Clear Register */
-#define TCU_TMR (TCU_BASE + 0x30) /* Timer Mask Register */
-#define TCU_TMSR (TCU_BASE + 0x34) /* Timer Mask Set Register */
-#define TCU_TMCR (TCU_BASE + 0x38) /* Timer Mask Clear Register */
-#define TCU_TDFR0 (TCU_BASE + 0x40) /* Timer Data Full Register */
-#define TCU_TDHR0 (TCU_BASE + 0x44) /* Timer Data Half Register */
-#define TCU_TCNT0 (TCU_BASE + 0x48) /* Timer Counter Register */
-#define TCU_TCSR0 (TCU_BASE + 0x4C) /* Timer Control Register */
-#define TCU_TDFR1 (TCU_BASE + 0x50)
-#define TCU_TDHR1 (TCU_BASE + 0x54)
-#define TCU_TCNT1 (TCU_BASE + 0x58)
-#define TCU_TCSR1 (TCU_BASE + 0x5C)
-#define TCU_TDFR2 (TCU_BASE + 0x60)
-#define TCU_TDHR2 (TCU_BASE + 0x64)
-#define TCU_TCNT2 (TCU_BASE + 0x68)
-#define TCU_TCSR2 (TCU_BASE + 0x6C)
-#define TCU_TDFR3 (TCU_BASE + 0x70)
-#define TCU_TDHR3 (TCU_BASE + 0x74)
-#define TCU_TCNT3 (TCU_BASE + 0x78)
-#define TCU_TCSR3 (TCU_BASE + 0x7C)
-#define TCU_TDFR4 (TCU_BASE + 0x80)
-#define TCU_TDHR4 (TCU_BASE + 0x84)
-#define TCU_TCNT4 (TCU_BASE + 0x88)
-#define TCU_TCSR4 (TCU_BASE + 0x8C)
-#define TCU_TDFR5 (TCU_BASE + 0x90)
-#define TCU_TDHR5 (TCU_BASE + 0x94)
-#define TCU_TCNT5 (TCU_BASE + 0x98)
-#define TCU_TCSR5 (TCU_BASE + 0x9C)
-
-#define REG_TCU_TSR REG32(TCU_TSR)
-#define REG_TCU_TSSR REG32(TCU_TSSR)
-#define REG_TCU_TSCR REG32(TCU_TSCR)
-#define REG_TCU_TER REG8(TCU_TER)
-#define REG_TCU_TESR REG8(TCU_TESR)
-#define REG_TCU_TECR REG8(TCU_TECR)
-#define REG_TCU_TFR REG32(TCU_TFR)
-#define REG_TCU_TFSR REG32(TCU_TFSR)
-#define REG_TCU_TFCR REG32(TCU_TFCR)
-#define REG_TCU_TMR REG32(TCU_TMR)
-#define REG_TCU_TMSR REG32(TCU_TMSR)
-#define REG_TCU_TMCR REG32(TCU_TMCR)
-#define REG_TCU_TDFR0 REG16(TCU_TDFR0)
-#define REG_TCU_TDHR0 REG16(TCU_TDHR0)
-#define REG_TCU_TCNT0 REG16(TCU_TCNT0)
-#define REG_TCU_TCSR0 REG16(TCU_TCSR0)
-#define REG_TCU_TDFR1 REG16(TCU_TDFR1)
-#define REG_TCU_TDHR1 REG16(TCU_TDHR1)
-#define REG_TCU_TCNT1 REG16(TCU_TCNT1)
-#define REG_TCU_TCSR1 REG16(TCU_TCSR1)
-#define REG_TCU_TDFR2 REG16(TCU_TDFR2)
-#define REG_TCU_TDHR2 REG16(TCU_TDHR2)
-#define REG_TCU_TCNT2 REG16(TCU_TCNT2)
-#define REG_TCU_TCSR2 REG16(TCU_TCSR2)
-#define REG_TCU_TDFR3 REG16(TCU_TDFR3)
-#define REG_TCU_TDHR3 REG16(TCU_TDHR3)
-#define REG_TCU_TCNT3 REG16(TCU_TCNT3)
-#define REG_TCU_TCSR3 REG16(TCU_TCSR3)
-#define REG_TCU_TDFR4 REG16(TCU_TDFR4)
-#define REG_TCU_TDHR4 REG16(TCU_TDHR4)
-#define REG_TCU_TCNT4 REG16(TCU_TCNT4)
-#define REG_TCU_TCSR4 REG16(TCU_TCSR4)
-
-/* n = 0,1,2,3,4,5 */
-#define TCU_TDFR(n) (TCU_BASE + (0x40 + (n)*0x10)) /* Timer Data Full Reg */
-#define TCU_TDHR(n) (TCU_BASE + (0x44 + (n)*0x10)) /* Timer Data Half Reg */
-#define TCU_TCNT(n) (TCU_BASE + (0x48 + (n)*0x10)) /* Timer Counter Reg */
-#define TCU_TCSR(n) (TCU_BASE + (0x4C + (n)*0x10)) /* Timer Control Reg */
-
-#define REG_TCU_TDFR(n) REG16(TCU_TDFR((n)))
-#define REG_TCU_TDHR(n) REG16(TCU_TDHR((n)))
-#define REG_TCU_TCNT(n) REG16(TCU_TCNT((n)))
-#define REG_TCU_TCSR(n) REG16(TCU_TCSR((n)))
-
-/* Register definitions */
-#define TCU_TCSR_PWM_SD (1 << 9)
-#define TCU_TCSR_PWM_INITL_HIGH (1 << 8)
-#define TCU_TCSR_PWM_EN (1 << 7)
-#define TCU_TCSR_PRESCALE_BIT 3
-#define TCU_TCSR_PRESCALE_MASK (0x7 << TCU_TCSR_PRESCALE_BIT)
-#define TCU_TCSR_PRESCALE1 (0x0 << TCU_TCSR_PRESCALE_BIT)
-#define TCU_TCSR_PRESCALE4 (0x1 << TCU_TCSR_PRESCALE_BIT)
-#define TCU_TCSR_PRESCALE16 (0x2 << TCU_TCSR_PRESCALE_BIT)
-#define TCU_TCSR_PRESCALE64 (0x3 << TCU_TCSR_PRESCALE_BIT)
-#define TCU_TCSR_PRESCALE256 (0x4 << TCU_TCSR_PRESCALE_BIT)
-#define TCU_TCSR_PRESCALE1024 (0x5 << TCU_TCSR_PRESCALE_BIT)
-#define TCU_TCSR_EXT_EN (1 << 2)
-#define TCU_TCSR_RTC_EN (1 << 1)
-#define TCU_TCSR_PCK_EN (1 << 0)
-
-#define TCU_TER_TCEN5 (1 << 5)
-#define TCU_TER_TCEN4 (1 << 4)
-#define TCU_TER_TCEN3 (1 << 3)
-#define TCU_TER_TCEN2 (1 << 2)
-#define TCU_TER_TCEN1 (1 << 1)
-#define TCU_TER_TCEN0 (1 << 0)
-
-#define TCU_TESR_TCST5 (1 << 5)
-#define TCU_TESR_TCST4 (1 << 4)
-#define TCU_TESR_TCST3 (1 << 3)
-#define TCU_TESR_TCST2 (1 << 2)
-#define TCU_TESR_TCST1 (1 << 1)
-#define TCU_TESR_TCST0 (1 << 0)
-
-#define TCU_TECR_TCCL5 (1 << 5)
-#define TCU_TECR_TCCL4 (1 << 4)
-#define TCU_TECR_TCCL3 (1 << 3)
-#define TCU_TECR_TCCL2 (1 << 2)
-#define TCU_TECR_TCCL1 (1 << 1)
-#define TCU_TECR_TCCL0 (1 << 0)
-
-#define TCU_TFR_HFLAG5 (1 << 21)
-#define TCU_TFR_HFLAG4 (1 << 20)
-#define TCU_TFR_HFLAG3 (1 << 19)
-#define TCU_TFR_HFLAG2 (1 << 18)
-#define TCU_TFR_HFLAG1 (1 << 17)
-#define TCU_TFR_HFLAG0 (1 << 16)
-#define TCU_TFR_FFLAG5 (1 << 5)
-#define TCU_TFR_FFLAG4 (1 << 4)
-#define TCU_TFR_FFLAG3 (1 << 3)
-#define TCU_TFR_FFLAG2 (1 << 2)
-#define TCU_TFR_FFLAG1 (1 << 1)
-#define TCU_TFR_FFLAG0 (1 << 0)
-
-#define TCU_TFSR_HFLAG5 (1 << 21)
-#define TCU_TFSR_HFLAG4 (1 << 20)
-#define TCU_TFSR_HFLAG3 (1 << 19)
-#define TCU_TFSR_HFLAG2 (1 << 18)
-#define TCU_TFSR_HFLAG1 (1 << 17)
-#define TCU_TFSR_HFLAG0 (1 << 16)
-#define TCU_TFSR_FFLAG5 (1 << 5)
-#define TCU_TFSR_FFLAG4 (1 << 4)
-#define TCU_TFSR_FFLAG3 (1 << 3)
-#define TCU_TFSR_FFLAG2 (1 << 2)
-#define TCU_TFSR_FFLAG1 (1 << 1)
-#define TCU_TFSR_FFLAG0 (1 << 0)
-
-#define TCU_TFCR_HFLAG5 (1 << 21)
-#define TCU_TFCR_HFLAG4 (1 << 20)
-#define TCU_TFCR_HFLAG3 (1 << 19)
-#define TCU_TFCR_HFLAG2 (1 << 18)
-#define TCU_TFCR_HFLAG1 (1 << 17)
-#define TCU_TFCR_HFLAG0 (1 << 16)
-#define TCU_TFCR_FFLAG5 (1 << 5)
-#define TCU_TFCR_FFLAG4 (1 << 4)
-#define TCU_TFCR_FFLAG3 (1 << 3)
-#define TCU_TFCR_FFLAG2 (1 << 2)
-#define TCU_TFCR_FFLAG1 (1 << 1)
-#define TCU_TFCR_FFLAG0 (1 << 0)
-
-#define TCU_TMR_HMASK5 (1 << 21)
-#define TCU_TMR_HMASK4 (1 << 20)
-#define TCU_TMR_HMASK3 (1 << 19)
-#define TCU_TMR_HMASK2 (1 << 18)
-#define TCU_TMR_HMASK1 (1 << 17)
-#define TCU_TMR_HMASK0 (1 << 16)
-#define TCU_TMR_FMASK5 (1 << 5)
-#define TCU_TMR_FMASK4 (1 << 4)
-#define TCU_TMR_FMASK3 (1 << 3)
-#define TCU_TMR_FMASK2 (1 << 2)
-#define TCU_TMR_FMASK1 (1 << 1)
-#define TCU_TMR_FMASK0 (1 << 0)
-
-#define TCU_TMSR_HMST5 (1 << 21)
-#define TCU_TMSR_HMST4 (1 << 20)
-#define TCU_TMSR_HMST3 (1 << 19)
-#define TCU_TMSR_HMST2 (1 << 18)
-#define TCU_TMSR_HMST1 (1 << 17)
-#define TCU_TMSR_HMST0 (1 << 16)
-#define TCU_TMSR_FMST5 (1 << 5)
-#define TCU_TMSR_FMST4 (1 << 4)
-#define TCU_TMSR_FMST3 (1 << 3)
-#define TCU_TMSR_FMST2 (1 << 2)
-#define TCU_TMSR_FMST1 (1 << 1)
-#define TCU_TMSR_FMST0 (1 << 0)
-
-#define TCU_TMCR_HMCL5 (1 << 21)
-#define TCU_TMCR_HMCL4 (1 << 20)
-#define TCU_TMCR_HMCL3 (1 << 19)
-#define TCU_TMCR_HMCL2 (1 << 18)
-#define TCU_TMCR_HMCL1 (1 << 17)
-#define TCU_TMCR_HMCL0 (1 << 16)
-#define TCU_TMCR_FMCL5 (1 << 5)
-#define TCU_TMCR_FMCL4 (1 << 4)
-#define TCU_TMCR_FMCL3 (1 << 3)
-#define TCU_TMCR_FMCL2 (1 << 2)
-#define TCU_TMCR_FMCL1 (1 << 1)
-#define TCU_TMCR_FMCL0 (1 << 0)
-
-#define TCU_TSR_WDTS (1 << 16)
-#define TCU_TSR_STOP5 (1 << 5)
-#define TCU_TSR_STOP4 (1 << 4)
-#define TCU_TSR_STOP3 (1 << 3)
-#define TCU_TSR_STOP2 (1 << 2)
-#define TCU_TSR_STOP1 (1 << 1)
-#define TCU_TSR_STOP0 (1 << 0)
-
-#define TCU_TSSR_WDTSS (1 << 16)
-#define TCU_TSSR_STPS5 (1 << 5)
-#define TCU_TSSR_STPS4 (1 << 4)
-#define TCU_TSSR_STPS3 (1 << 3)
-#define TCU_TSSR_STPS2 (1 << 2)
-#define TCU_TSSR_STPS1 (1 << 1)
-#define TCU_TSSR_STPS0 (1 << 0)
-
-#define TCU_TSSR_WDTSC (1 << 16)
-#define TCU_TSSR_STPC5 (1 << 5)
-#define TCU_TSSR_STPC4 (1 << 4)
-#define TCU_TSSR_STPC3 (1 << 3)
-#define TCU_TSSR_STPC2 (1 << 2)
-#define TCU_TSSR_STPC1 (1 << 1)
-#define TCU_TSSR_STPC0 (1 << 0)
-
-
-/*
- * WDT (WatchDog Timer)
- */
-#define WDT_TDR (WDT_BASE + 0x00)
-#define WDT_TCER (WDT_BASE + 0x04)
-#define WDT_TCNT (WDT_BASE + 0x08)
-#define WDT_TCSR (WDT_BASE + 0x0C)
-
-#define REG_WDT_TDR REG16(WDT_TDR)
-#define REG_WDT_TCER REG8(WDT_TCER)
-#define REG_WDT_TCNT REG16(WDT_TCNT)
-#define REG_WDT_TCSR REG16(WDT_TCSR)
-
-/* Register definition */
-#define WDT_TCSR_PRESCALE_BIT 3
-#define WDT_TCSR_PRESCALE_MASK (0x7 << WDT_TCSR_PRESCALE_BIT)
- #define WDT_TCSR_PRESCALE1 (0x0 << WDT_TCSR_PRESCALE_BIT)
- #define WDT_TCSR_PRESCALE4 (0x1 << WDT_TCSR_PRESCALE_BIT)
- #define WDT_TCSR_PRESCALE16 (0x2 << WDT_TCSR_PRESCALE_BIT)
- #define WDT_TCSR_PRESCALE64 (0x3 << WDT_TCSR_PRESCALE_BIT)
- #define WDT_TCSR_PRESCALE256 (0x4 << WDT_TCSR_PRESCALE_BIT)
- #define WDT_TCSR_PRESCALE1024 (0x5 << WDT_TCSR_PRESCALE_BIT)
-#define WDT_TCSR_EXT_EN (1 << 2)
-#define WDT_TCSR_RTC_EN (1 << 1)
-#define WDT_TCSR_PCK_EN (1 << 0)
-
-#define WDT_TCER_TCEN (1 << 0)
-
-
-/*
- * DMAC (DMA Controller)
- */
-
-#define MAX_DMA_NUM 6 /* max 6 channels */
-
-#define DMAC_DSAR(n) (DMAC_BASE + (0x00 + (n) * 0x20)) /* DMA source address */
-#define DMAC_DTAR(n) (DMAC_BASE + (0x04 + (n) * 0x20)) /* DMA target address */
-#define DMAC_DTCR(n) (DMAC_BASE + (0x08 + (n) * 0x20)) /* DMA transfer count */
-#define DMAC_DRSR(n) (DMAC_BASE + (0x0c + (n) * 0x20)) /* DMA request source */
-#define DMAC_DCCSR(n) (DMAC_BASE + (0x10 + (n) * 0x20)) /* DMA control/status */
-#define DMAC_DCMD(n) (DMAC_BASE + (0x14 + (n) * 0x20)) /* DMA command */
-#define DMAC_DDA(n) (DMAC_BASE + (0x18 + (n) * 0x20)) /* DMA descriptor address */
-#define DMAC_DMACR (DMAC_BASE + 0x0300) /* DMA control register */
-#define DMAC_DMAIPR (DMAC_BASE + 0x0304) /* DMA interrupt pending */
-#define DMAC_DMADBR (DMAC_BASE + 0x0308) /* DMA doorbell */
-#define DMAC_DMADBSR (DMAC_BASE + 0x030C) /* DMA doorbell set */
-
-/* channel 0 */
-#define DMAC_DSAR0 DMAC_DSAR(0)
-#define DMAC_DTAR0 DMAC_DTAR(0)
-#define DMAC_DTCR0 DMAC_DTCR(0)
-#define DMAC_DRSR0 DMAC_DRSR(0)
-#define DMAC_DCCSR0 DMAC_DCCSR(0)
-#define DMAC_DCMD0 DMAC_DCMD(0)
-#define DMAC_DDA0 DMAC_DDA(0)
-
-/* channel 1 */
-#define DMAC_DSAR1 DMAC_DSAR(1)
-#define DMAC_DTAR1 DMAC_DTAR(1)
-#define DMAC_DTCR1 DMAC_DTCR(1)
-#define DMAC_DRSR1 DMAC_DRSR(1)
-#define DMAC_DCCSR1 DMAC_DCCSR(1)
-#define DMAC_DCMD1 DMAC_DCMD(1)
-#define DMAC_DDA1 DMAC_DDA(1)
-
-/* channel 2 */
-#define DMAC_DSAR2 DMAC_DSAR(2)
-#define DMAC_DTAR2 DMAC_DTAR(2)
-#define DMAC_DTCR2 DMAC_DTCR(2)
-#define DMAC_DRSR2 DMAC_DRSR(2)
-#define DMAC_DCCSR2 DMAC_DCCSR(2)
-#define DMAC_DCMD2 DMAC_DCMD(2)
-#define DMAC_DDA2 DMAC_DDA(2)
-
-/* channel 3 */
-#define DMAC_DSAR3 DMAC_DSAR(3)
-#define DMAC_DTAR3 DMAC_DTAR(3)
-#define DMAC_DTCR3 DMAC_DTCR(3)
-#define DMAC_DRSR3 DMAC_DRSR(3)
-#define DMAC_DCCSR3 DMAC_DCCSR(3)
-#define DMAC_DCMD3 DMAC_DCMD(3)
-#define DMAC_DDA3 DMAC_DDA(3)
-
-/* channel 4 */
-#define DMAC_DSAR4 DMAC_DSAR(4)
-#define DMAC_DTAR4 DMAC_DTAR(4)
-#define DMAC_DTCR4 DMAC_DTCR(4)
-#define DMAC_DRSR4 DMAC_DRSR(4)
-#define DMAC_DCCSR4 DMAC_DCCSR(4)
-#define DMAC_DCMD4 DMAC_DCMD(4)
-#define DMAC_DDA4 DMAC_DDA(4)
-
-/* channel 5 */
-#define DMAC_DSAR5 DMAC_DSAR(5)
-#define DMAC_DTAR5 DMAC_DTAR(5)
-#define DMAC_DTCR5 DMAC_DTCR(5)
-#define DMAC_DRSR5 DMAC_DRSR(5)
-#define DMAC_DCCSR5 DMAC_DCCSR(5)
-#define DMAC_DCMD5 DMAC_DCMD(5)
-#define DMAC_DDA5 DMAC_DDA(5)
-
-#define REG_DMAC_DSAR(n) REG32(DMAC_DSAR((n)))
-#define REG_DMAC_DTAR(n) REG32(DMAC_DTAR((n)))
-#define REG_DMAC_DTCR(n) REG32(DMAC_DTCR((n)))
-#define REG_DMAC_DRSR(n) REG32(DMAC_DRSR((n)))
-#define REG_DMAC_DCCSR(n) REG32(DMAC_DCCSR((n)))
-#define REG_DMAC_DCMD(n) REG32(DMAC_DCMD((n)))
-#define REG_DMAC_DDA(n) REG32(DMAC_DDA((n)))
-#define REG_DMAC_DMACR REG32(DMAC_DMACR)
-#define REG_DMAC_DMAIPR REG32(DMAC_DMAIPR)
-#define REG_DMAC_DMADBR REG32(DMAC_DMADBR)
-#define REG_DMAC_DMADBSR REG32(DMAC_DMADBSR)
-
-/* DMA request source register */
-#define DMAC_DRSR_RS_BIT 0
-#define DMAC_DRSR_RS_MASK (0x1f << DMAC_DRSR_RS_BIT)
-#define DMAC_DRSR_RS_AUTO (8 << DMAC_DRSR_RS_BIT)
-#define DMAC_DRSR_RS_UART0OUT (20 << DMAC_DRSR_RS_BIT)
-#define DMAC_DRSR_RS_UART0IN (21 << DMAC_DRSR_RS_BIT)
-#define DMAC_DRSR_RS_SSIOUT (22 << DMAC_DRSR_RS_BIT)
-#define DMAC_DRSR_RS_SSIIN (23 << DMAC_DRSR_RS_BIT)
-#define DMAC_DRSR_RS_AICOUT (24 << DMAC_DRSR_RS_BIT)
-#define DMAC_DRSR_RS_AICIN (25 << DMAC_DRSR_RS_BIT)
-#define DMAC_DRSR_RS_MSCOUT (26 << DMAC_DRSR_RS_BIT)
-#define DMAC_DRSR_RS_MSCIN (27 << DMAC_DRSR_RS_BIT)
-#define DMAC_DRSR_RS_TCU (28 << DMAC_DRSR_RS_BIT)
-#define DMAC_DRSR_RS_SADC (29 << DMAC_DRSR_RS_BIT)
-#define DMAC_DRSR_RS_SLCD (30 << DMAC_DRSR_RS_BIT)
-
-/* DMA channel control/status register */
-#define DMAC_DCCSR_NDES (1 << 31) /* descriptor (0) or not (1) ? */
-#define DMAC_DCCSR_CDOA_BIT 16 /* copy of DMA offset address */
-#define DMAC_DCCSR_CDOA_MASK (0xff << DMAC_DCCSR_CDOA_BIT)
-#define DMAC_DCCSR_INV (1 << 6) /* descriptor invalid */
-#define DMAC_DCCSR_AR (1 << 4) /* address error */
-#define DMAC_DCCSR_TT (1 << 3) /* transfer terminated */
-#define DMAC_DCCSR_HLT (1 << 2) /* DMA halted */
-#define DMAC_DCCSR_CT (1 << 1) /* count terminated */
-#define DMAC_DCCSR_EN (1 << 0) /* channel enable bit */
-
-/* DMA channel command register */
-#define DMAC_DCMD_SAI (1 << 23) /* source address increment */
-#define DMAC_DCMD_DAI (1 << 22) /* dest address increment */
-#define DMAC_DCMD_RDIL_BIT 16 /* request detection interval length */
-#define DMAC_DCMD_RDIL_MASK (0x0f << DMAC_DCMD_RDIL_BIT)
- #define DMAC_DCMD_RDIL_IGN (0 << DMAC_DCMD_RDIL_BIT)
- #define DMAC_DCMD_RDIL_2 (1 << DMAC_DCMD_RDIL_BIT)
- #define DMAC_DCMD_RDIL_4 (2 << DMAC_DCMD_RDIL_BIT)
- #define DMAC_DCMD_RDIL_8 (3 << DMAC_DCMD_RDIL_BIT)
- #define DMAC_DCMD_RDIL_12 (4 << DMAC_DCMD_RDIL_BIT)
- #define DMAC_DCMD_RDIL_16 (5 << DMAC_DCMD_RDIL_BIT)
- #define DMAC_DCMD_RDIL_20 (6 << DMAC_DCMD_RDIL_BIT)
- #define DMAC_DCMD_RDIL_24 (7 << DMAC_DCMD_RDIL_BIT)
- #define DMAC_DCMD_RDIL_28 (8 << DMAC_DCMD_RDIL_BIT)
- #define DMAC_DCMD_RDIL_32 (9 << DMAC_DCMD_RDIL_BIT)
- #define DMAC_DCMD_RDIL_48 (10 << DMAC_DCMD_RDIL_BIT)
- #define DMAC_DCMD_RDIL_60 (11 << DMAC_DCMD_RDIL_BIT)
- #define DMAC_DCMD_RDIL_64 (12 << DMAC_DCMD_RDIL_BIT)
- #define DMAC_DCMD_RDIL_124 (13 << DMAC_DCMD_RDIL_BIT)
- #define DMAC_DCMD_RDIL_128 (14 << DMAC_DCMD_RDIL_BIT)
- #define DMAC_DCMD_RDIL_200 (15 << DMAC_DCMD_RDIL_BIT)
-#define DMAC_DCMD_SWDH_BIT 14 /* source port width */
-#define DMAC_DCMD_SWDH_MASK (0x03 << DMAC_DCMD_SWDH_BIT)
- #define DMAC_DCMD_SWDH_32 (0 << DMAC_DCMD_SWDH_BIT)
- #define DMAC_DCMD_SWDH_8 (1 << DMAC_DCMD_SWDH_BIT)
- #define DMAC_DCMD_SWDH_16 (2 << DMAC_DCMD_SWDH_BIT)
-#define DMAC_DCMD_DWDH_BIT 12 /* dest port width */
-#define DMAC_DCMD_DWDH_MASK (0x03 << DMAC_DCMD_DWDH_BIT)
- #define DMAC_DCMD_DWDH_32 (0 << DMAC_DCMD_DWDH_BIT)
- #define DMAC_DCMD_DWDH_8 (1 << DMAC_DCMD_DWDH_BIT)
- #define DMAC_DCMD_DWDH_16 (2 << DMAC_DCMD_DWDH_BIT)
-#define DMAC_DCMD_DS_BIT 8 /* transfer data size of a data unit */
-#define DMAC_DCMD_DS_MASK (0x07 << DMAC_DCMD_DS_BIT)
- #define DMAC_DCMD_DS_32BIT (0 << DMAC_DCMD_DS_BIT)
- #define DMAC_DCMD_DS_8BIT (1 << DMAC_DCMD_DS_BIT)
- #define DMAC_DCMD_DS_16BIT (2 << DMAC_DCMD_DS_BIT)
- #define DMAC_DCMD_DS_16BYTE (3 << DMAC_DCMD_DS_BIT)
- #define DMAC_DCMD_DS_32BYTE (4 << DMAC_DCMD_DS_BIT)
-#define DMAC_DCMD_TM (1 << 7) /* transfer mode: 0-single 1-block */
-#define DMAC_DCMD_DES_V (1 << 4) /* descriptor valid flag */
-#define DMAC_DCMD_DES_VM (1 << 3) /* descriptor valid mask: 1:support V-bit */
-#define DMAC_DCMD_DES_VIE (1 << 2) /* DMA valid error interrupt enable */
-#define DMAC_DCMD_TIE (1 << 1) /* DMA transfer interrupt enable */
-#define DMAC_DCMD_LINK (1 << 0) /* descriptor link enable */
-
-/* DMA descriptor address register */
-#define DMAC_DDA_BASE_BIT 12 /* descriptor base address */
-#define DMAC_DDA_BASE_MASK (0x0fffff << DMAC_DDA_BASE_BIT)
-#define DMAC_DDA_OFFSET_BIT 4 /* descriptor offset address */
-#define DMAC_DDA_OFFSET_MASK (0x0ff << DMAC_DDA_OFFSET_BIT)
-
-/* DMA control register */
-#define DMAC_DMACR_PR_BIT 8 /* channel priority mode */
-#define DMAC_DMACR_PR_MASK (0x03 << DMAC_DMACR_PR_BIT)
- #define DMAC_DMACR_PR_012345 (0 << DMAC_DMACR_PR_BIT)
- #define DMAC_DMACR_PR_023145 (1 << DMAC_DMACR_PR_BIT)
- #define DMAC_DMACR_PR_201345 (2 << DMAC_DMACR_PR_BIT)
- #define DMAC_DMACR_PR_RR (3 << DMAC_DMACR_PR_BIT) /* round robin */
-#define DMAC_DMACR_HLT (1 << 3) /* DMA halt flag */
-#define DMAC_DMACR_AR (1 << 2) /* address error flag */
-#define DMAC_DMACR_DMAE (1 << 0) /* DMA enable bit */
-
-/* DMA doorbell register */
-#define DMAC_DMADBR_DB5 (1 << 5) /* doorbell for channel 5 */
-#define DMAC_DMADBR_DB4 (1 << 5) /* doorbell for channel 4 */
-#define DMAC_DMADBR_DB3 (1 << 5) /* doorbell for channel 3 */
-#define DMAC_DMADBR_DB2 (1 << 5) /* doorbell for channel 2 */
-#define DMAC_DMADBR_DB1 (1 << 5) /* doorbell for channel 1 */
-#define DMAC_DMADBR_DB0 (1 << 5) /* doorbell for channel 0 */
-
-/* DMA doorbell set register */
-#define DMAC_DMADBSR_DBS5 (1 << 5) /* enable doorbell for channel 5 */
-#define DMAC_DMADBSR_DBS4 (1 << 5) /* enable doorbell for channel 4 */
-#define DMAC_DMADBSR_DBS3 (1 << 5) /* enable doorbell for channel 3 */
-#define DMAC_DMADBSR_DBS2 (1 << 5) /* enable doorbell for channel 2 */
-#define DMAC_DMADBSR_DBS1 (1 << 5) /* enable doorbell for channel 1 */
-#define DMAC_DMADBSR_DBS0 (1 << 5) /* enable doorbell for channel 0 */
-
-/* DMA interrupt pending register */
-#define DMAC_DMAIPR_CIRQ5 (1 << 5) /* irq pending status for channel 5 */
-#define DMAC_DMAIPR_CIRQ4 (1 << 4) /* irq pending status for channel 4 */
-#define DMAC_DMAIPR_CIRQ3 (1 << 3) /* irq pending status for channel 3 */
-#define DMAC_DMAIPR_CIRQ2 (1 << 2) /* irq pending status for channel 2 */
-#define DMAC_DMAIPR_CIRQ1 (1 << 1) /* irq pending status for channel 1 */
-#define DMAC_DMAIPR_CIRQ0 (1 << 0) /* irq pending status for channel 0 */
-
-
-/*************************************************************************
- * GPIO (General-Purpose I/O Ports)
- *************************************************************************/
-#define MAX_GPIO_NUM 128
-
-/* = 0,1,2,3 */
-#define GPIO_PXPIN(n) (GPIO_BASE + (0x00 + (n)*0x100)) /* PIN Level Register */
-#define GPIO_PXDAT(n) (GPIO_BASE + (0x10 + (n)*0x100)) /* Port Data Register */
-#define GPIO_PXDATS(n) (GPIO_BASE + (0x14 + (n)*0x100)) /* Port Data Set Register */
-#define GPIO_PXDATC(n) (GPIO_BASE + (0x18 + (n)*0x100)) /* Port Data Clear Register */
-#define GPIO_PXIM(n) (GPIO_BASE + (0x20 + (n)*0x100)) /* Interrupt Mask Register */
-#define GPIO_PXIMS(n) (GPIO_BASE + (0x24 + (n)*0x100)) /* Interrupt Mask Set Reg */
-#define GPIO_PXIMC(n) (GPIO_BASE + (0x28 + (n)*0x100)) /* Interrupt Mask Clear Reg */
-#define GPIO_PXPE(n) (GPIO_BASE + (0x30 + (n)*0x100)) /* Pull Enable Register */
-#define GPIO_PXPES(n) (GPIO_BASE + (0x34 + (n)*0x100)) /* Pull Enable Set Reg. */
-#define GPIO_PXPEC(n) (GPIO_BASE + (0x38 + (n)*0x100)) /* Pull Enable Clear Reg. */
-#define GPIO_PXFUN(n) (GPIO_BASE + (0x40 + (n)*0x100)) /* Function Register */
-#define GPIO_PXFUNS(n) (GPIO_BASE + (0x44 + (n)*0x100)) /* Function Set Register */
-#define GPIO_PXFUNC(n) (GPIO_BASE + (0x48 + (n)*0x100)) /* Function Clear Register */
-#define GPIO_PXSEL(n) (GPIO_BASE + (0x50 + (n)*0x100)) /* Select Register */
-#define GPIO_PXSELS(n) (GPIO_BASE + (0x54 + (n)*0x100)) /* Select Set Register */
-#define GPIO_PXSELC(n) (GPIO_BASE + (0x58 + (n)*0x100)) /* Select Clear Register */
-#define GPIO_PXDIR(n) (GPIO_BASE + (0x60 + (n)*0x100)) /* Direction Register */
-#define GPIO_PXDIRS(n) (GPIO_BASE + (0x64 + (n)*0x100)) /* Direction Set Register */
-#define GPIO_PXDIRC(n) (GPIO_BASE + (0x68 + (n)*0x100)) /* Direction Clear Register */
-#define GPIO_PXTRG(n) (GPIO_BASE + (0x70 + (n)*0x100)) /* Trigger Register */
-#define GPIO_PXTRGS(n) (GPIO_BASE + (0x74 + (n)*0x100)) /* Trigger Set Register */
-#define GPIO_PXTRGC(n) (GPIO_BASE + (0x78 + (n)*0x100)) /* Trigger Set Register */
-#define GPIO_PXFLG(n) (GPIO_BASE + (0x80 + (n)*0x100)) /* Port Flag Register */
-#define GPIO_PXFLGC(n) (GPIO_BASE + (0x14 + (n)*0x100)) /* Port Flag clear Register */
-
-#define REG_GPIO_PXPIN(n) REG32(GPIO_PXPIN((n))) /* PIN level */
-#define REG_GPIO_PXDAT(n) REG32(GPIO_PXDAT((n))) /* 1: interrupt pending */
-#define REG_GPIO_PXDATS(n) REG32(GPIO_PXDATS((n)))
-#define REG_GPIO_PXDATC(n) REG32(GPIO_PXDATC((n)))
-#define REG_GPIO_PXIM(n) REG32(GPIO_PXIM((n))) /* 1: mask pin interrupt */
-#define REG_GPIO_PXIMS(n) REG32(GPIO_PXIMS((n)))
-#define REG_GPIO_PXIMC(n) REG32(GPIO_PXIMC((n)))
-#define REG_GPIO_PXPE(n) REG32(GPIO_PXPE((n))) /* 1: disable pull up/down */
-#define REG_GPIO_PXPES(n) REG32(GPIO_PXPES((n)))
-#define REG_GPIO_PXPEC(n) REG32(GPIO_PXPEC((n)))
-#define REG_GPIO_PXFUN(n) REG32(GPIO_PXFUN((n))) /* 0:GPIO or intr, 1:FUNC */
-#define REG_GPIO_PXFUNS(n) REG32(GPIO_PXFUNS((n)))
-#define REG_GPIO_PXFUNC(n) REG32(GPIO_PXFUNC((n)))
-#define REG_GPIO_PXSEL(n) REG32(GPIO_PXSEL((n))) /* 0:GPIO/Fun0,1:intr/fun1*/
-#define REG_GPIO_PXSELS(n) REG32(GPIO_PXSELS((n)))
-#define REG_GPIO_PXSELC(n) REG32(GPIO_PXSELC((n)))
-#define REG_GPIO_PXDIR(n) REG32(GPIO_PXDIR((n))) /* 0:input/low-level-trig/falling-edge-trig, 1:output/high-level-trig/rising-edge-trig */
-#define REG_GPIO_PXDIRS(n) REG32(GPIO_PXDIRS((n)))
-#define REG_GPIO_PXDIRC(n) REG32(GPIO_PXDIRC((n)))
-#define REG_GPIO_PXTRG(n) REG32(GPIO_PXTRG((n))) /* 0:level-trigger, 1:edge-trigger */
-#define REG_GPIO_PXTRGS(n) REG32(GPIO_PXTRGS((n)))
-#define REG_GPIO_PXTRGC(n) REG32(GPIO_PXTRGC((n)))
-#define REG_GPIO_PXFLG(n) REG32(GPIO_PXFLG((n))) /* interrupt flag */
-#define REG_GPIO_PXFLGC(n) REG32(GPIO_PXFLGC((n))) /* interrupt flag */
-
-
-/*************************************************************************
- * UART
- *************************************************************************/
-
-#define IRDA_BASE UART0_BASE
-#define UART_BASE UART0_BASE
-#define UART_OFF 0x1000
-
-/* Register Offset */
-#define OFF_RDR (0x00) /* R 8b H'xx */
-#define OFF_TDR (0x00) /* W 8b H'xx */
-#define OFF_DLLR (0x00) /* RW 8b H'00 */
-#define OFF_DLHR (0x04) /* RW 8b H'00 */
-#define OFF_IER (0x04) /* RW 8b H'00 */
-#define OFF_ISR (0x08) /* R 8b H'01 */
-#define OFF_FCR (0x08) /* W 8b H'00 */
-#define OFF_LCR (0x0C) /* RW 8b H'00 */
-#define OFF_MCR (0x10) /* RW 8b H'00 */
-#define OFF_LSR (0x14) /* R 8b H'00 */
-#define OFF_MSR (0x18) /* R 8b H'00 */
-#define OFF_SPR (0x1C) /* RW 8b H'00 */
-#define OFF_SIRCR (0x20) /* RW 8b H'00, UART0 */
-#define OFF_UMR (0x24) /* RW 8b H'00, UART M Register */
-#define OFF_UACR (0x28) /* RW 8b H'00, UART Add Cycle Register */
-
-/* Register Address */
-#define UART0_RDR (UART0_BASE + OFF_RDR)
-#define UART0_TDR (UART0_BASE + OFF_TDR)
-#define UART0_DLLR (UART0_BASE + OFF_DLLR)
-#define UART0_DLHR (UART0_BASE + OFF_DLHR)
-#define UART0_IER (UART0_BASE + OFF_IER)
-#define UART0_ISR (UART0_BASE + OFF_ISR)
-#define UART0_FCR (UART0_BASE + OFF_FCR)
-#define UART0_LCR (UART0_BASE + OFF_LCR)
-#define UART0_MCR (UART0_BASE + OFF_MCR)
-#define UART0_LSR (UART0_BASE + OFF_LSR)
-#define UART0_MSR (UART0_BASE + OFF_MSR)
-#define UART0_SPR (UART0_BASE + OFF_SPR)
-#define UART0_SIRCR (UART0_BASE + OFF_SIRCR)
-#define UART0_UMR (UART0_BASE + OFF_UMR)
-#define UART0_UACR (UART0_BASE + OFF_UACR)
-
-/*
- * Define macros for UART_IER
- * UART Interrupt Enable Register
- */
-#define UART_IER_RIE (1 << 0) /* 0: receive fifo "full" interrupt disable */
-#define UART_IER_TIE (1 << 1) /* 0: transmit fifo "empty" interrupt disable */
-#define UART_IER_RLIE (1 << 2) /* 0: receive line status interrupt disable */
-#define UART_IER_MIE (1 << 3) /* 0: modem status interrupt disable */
-#define UART_IER_RTIE (1 << 4) /* 0: receive timeout interrupt disable */
-
-/*
- * Define macros for UART_ISR
- * UART Interrupt Status Register
- */
-#define UART_ISR_IP (1 << 0) /* 0: interrupt is pending 1: no interrupt */
-#define UART_ISR_IID (7 << 1) /* Source of Interrupt */
-#define UART_ISR_IID_MSI (0 << 1) /* Modem status interrupt */
-#define UART_ISR_IID_THRI (1 << 1) /* Transmitter holding register empty */
-#define UART_ISR_IID_RDI (2 << 1) /* Receiver data interrupt */
-#define UART_ISR_IID_RLSI (3 << 1) /* Receiver line status interrupt */
-#define UART_ISR_FFMS (3 << 6) /* FIFO mode select, set when UART_FCR.FE is set to 1 */
-#define UART_ISR_FFMS_NO_FIFO (0 << 6)
-#define UART_ISR_FFMS_FIFO_MODE (3 << 6)
-
-/*
- * Define macros for UART_FCR
- * UART FIFO Control Register
- */
-#define UART_FCR_FE (1 << 0) /* 0: non-FIFO mode 1: FIFO mode */
-#define UART_FCR_RFLS (1 << 1) /* write 1 to flush receive FIFO */
-#define UART_FCR_TFLS (1 << 2) /* write 1 to flush transmit FIFO */
-#define UART_FCR_DMS (1 << 3) /* 0: disable DMA mode */
-#define UART_FCR_UUE (1 << 4) /* 0: disable UART */
-#define UART_FCR_RTRG (3 << 6) /* Receive FIFO Data Trigger */
-#define UART_FCR_RTRG_1 (0 << 6)
-#define UART_FCR_RTRG_4 (1 << 6)
-#define UART_FCR_RTRG_8 (2 << 6)
-#define UART_FCR_RTRG_15 (3 << 6)
-
-/*
- * Define macros for UART_LCR
- * UART Line Control Register
- */
-#define UART_LCR_WLEN (3 << 0) /* word length */
-#define UART_LCR_WLEN_5 (0 << 0)
-#define UART_LCR_WLEN_6 (1 << 0)
-#define UART_LCR_WLEN_7 (2 << 0)
-#define UART_LCR_WLEN_8 (3 << 0)
-#define UART_LCR_STOP (1 << 2) /* 0: 1 stop bit when word length is 5,6,7,8
- 1: 1.5 stop bits when 5; 2 stop bits when 6,7,8 */
-#define UART_LCR_STOP_1 (0 << 2) /* 0: 1 stop bit when word length is 5,6,7,8
- 1: 1.5 stop bits when 5; 2 stop bits when 6,7,8 */
-#define UART_LCR_STOP_2 (1 << 2) /* 0: 1 stop bit when word length is 5,6,7,8
- 1: 1.5 stop bits when 5; 2 stop bits when 6,7,8 */
-
-#define UART_LCR_PE (1 << 3) /* 0: parity disable */
-#define UART_LCR_PROE (1 << 4) /* 0: even parity 1: odd parity */
-#define UART_LCR_SPAR (1 << 5) /* 0: sticky parity disable */
-#define UART_LCR_SBRK (1 << 6) /* write 0 normal, write 1 send break */
-#define UART_LCR_DLAB (1 << 7) /* 0: access UART_RDR/TDR/IER 1: access UART_DLLR/DLHR */
-
-/*
- * Define macros for UART_LSR
- * UART Line Status Register
- */
-#define UART_LSR_DR (1 << 0) /* 0: receive FIFO is empty 1: receive data is ready */
-#define UART_LSR_ORER (1 << 1) /* 0: no overrun error */
-#define UART_LSR_PER (1 << 2) /* 0: no parity error */
-#define UART_LSR_FER (1 << 3) /* 0; no framing error */
-#define UART_LSR_BRK (1 << 4) /* 0: no break detected 1: receive a break signal */
-#define UART_LSR_TDRQ (1 << 5) /* 1: transmit FIFO half "empty" */
-#define UART_LSR_TEMT (1 << 6) /* 1: transmit FIFO and shift registers empty */
-#define UART_LSR_RFER (1 << 7) /* 0: no receive error 1: receive error in FIFO mode */
-
-/*
- * Define macros for UART_MCR
- * UART Modem Control Register
- */
-#define UART_MCR_DTR (1 << 0) /* 0: DTR_ ouput high */
-#define UART_MCR_RTS (1 << 1) /* 0: RTS_ output high */
-#define UART_MCR_OUT1 (1 << 2) /* 0: UART_MSR.RI is set to 0 and RI_ input high */
-#define UART_MCR_OUT2 (1 << 3) /* 0: UART_MSR.DCD is set to 0 and DCD_ input high */
-#define UART_MCR_LOOP (1 << 4) /* 0: normal 1: loopback mode */
-#define UART_MCR_MCE (1 << 7) /* 0: modem function is disable */
-
-/*
- * Define macros for UART_MSR
- * UART Modem Status Register
- */
-#define UART_MSR_DCTS (1 << 0) /* 0: no change on CTS_ pin since last read of UART_MSR */
-#define UART_MSR_DDSR (1 << 1) /* 0: no change on DSR_ pin since last read of UART_MSR */
-#define UART_MSR_DRI (1 << 2) /* 0: no change on RI_ pin since last read of UART_MSR */
-#define UART_MSR_DDCD (1 << 3) /* 0: no change on DCD_ pin since last read of UART_MSR */
-#define UART_MSR_CTS (1 << 4) /* 0: CTS_ pin is high */
-#define UART_MSR_DSR (1 << 5) /* 0: DSR_ pin is high */
-#define UART_MSR_RI (1 << 6) /* 0: RI_ pin is high */
-#define UART_MSR_DCD (1 << 7) /* 0: DCD_ pin is high */
-
-/*
- * Define macros for SIRCR
- * Slow IrDA Control Register
- */
-#define SIRCR_TSIRE (1 << 0) /* 0: transmitter is in UART mode 1: IrDA mode */
-#define SIRCR_RSIRE (1 << 1) /* 0: receiver is in UART mode 1: IrDA mode */
-#define SIRCR_TPWS (1 << 2) /* 0: transmit 0 pulse width is 3/16 of bit length
- 1: 0 pulse width is 1.6us for 115.2Kbps */
-#define SIRCR_TXPL (1 << 3) /* 0: encoder generates a positive pulse for 0 */
-#define SIRCR_RXPL (1 << 4) /* 0: decoder interprets positive pulse as 0 */
-
-
-/*************************************************************************
- * AIC (AC97/I2S Controller)
- *************************************************************************/
-#define AIC_FR (AIC_BASE + 0x000)
-#define AIC_CR (AIC_BASE + 0x004)
-#define AIC_ACCR1 (AIC_BASE + 0x008)
-#define AIC_ACCR2 (AIC_BASE + 0x00C)
-#define AIC_I2SCR (AIC_BASE + 0x010)
-#define AIC_SR (AIC_BASE + 0x014)
-#define AIC_ACSR (AIC_BASE + 0x018)
-#define AIC_I2SSR (AIC_BASE + 0x01C)
-#define AIC_ACCAR (AIC_BASE + 0x020)
-#define AIC_ACCDR (AIC_BASE + 0x024)
-#define AIC_ACSAR (AIC_BASE + 0x028)
-#define AIC_ACSDR (AIC_BASE + 0x02C)
-#define AIC_I2SDIV (AIC_BASE + 0x030)
-#define AIC_DR (AIC_BASE + 0x034)
-
-#define REG_AIC_FR REG32(AIC_FR)
-#define REG_AIC_CR REG32(AIC_CR)
-#define REG_AIC_ACCR1 REG32(AIC_ACCR1)
-#define REG_AIC_ACCR2 REG32(AIC_ACCR2)
-#define REG_AIC_I2SCR REG32(AIC_I2SCR)
-#define REG_AIC_SR REG32(AIC_SR)
-#define REG_AIC_ACSR REG32(AIC_ACSR)
-#define REG_AIC_I2SSR REG32(AIC_I2SSR)
-#define REG_AIC_ACCAR REG32(AIC_ACCAR)
-#define REG_AIC_ACCDR REG32(AIC_ACCDR)
-#define REG_AIC_ACSAR REG32(AIC_ACSAR)
-#define REG_AIC_ACSDR REG32(AIC_ACSDR)
-#define REG_AIC_I2SDIV REG32(AIC_I2SDIV)
-#define REG_AIC_DR REG32(AIC_DR)
-
-/* AIC Controller Configuration Register (AIC_FR) */
-
-#define AIC_FR_RFTH_BIT 12 /* Receive FIFO Threshold */
-#define AIC_FR_RFTH_MASK (0xf << AIC_FR_RFTH_BIT)
-#define AIC_FR_TFTH_BIT 8 /* Transmit FIFO Threshold */
-#define AIC_FR_TFTH_MASK (0xf << AIC_FR_TFTH_BIT)
-#define AIC_FR_ICDC (1 << 5) /* External(0) or Internal CODEC(1) */
-#define AIC_FR_AUSEL (1 << 4) /* AC97(0) or I2S/MSB-justified(1) */
-#define AIC_FR_RST (1 << 3) /* AIC registers reset */
-#define AIC_FR_BCKD (1 << 2) /* I2S BIT_CLK direction, 0:input,1:output */
-#define AIC_FR_SYNCD (1 << 1) /* I2S SYNC direction, 0:input,1:output */
-#define AIC_FR_ENB (1 << 0) /* AIC enable bit */
-
-/* AIC Controller Common Control Register (AIC_CR) */
-
-#define AIC_CR_OSS_BIT 19 /* Output Sample Size from memory (AIC V2 only) */
-#define AIC_CR_OSS_MASK (0x7 << AIC_CR_OSS_BIT)
- #define AIC_CR_OSS_8BIT (0x0 << AIC_CR_OSS_BIT)
- #define AIC_CR_OSS_16BIT (0x1 << AIC_CR_OSS_BIT)
- #define AIC_CR_OSS_18BIT (0x2 << AIC_CR_OSS_BIT)
- #define AIC_CR_OSS_20BIT (0x3 << AIC_CR_OSS_BIT)
- #define AIC_CR_OSS_24BIT (0x4 << AIC_CR_OSS_BIT)
-#define AIC_CR_ISS_BIT 16 /* Input Sample Size from memory (AIC V2 only) */
-#define AIC_CR_ISS_MASK (0x7 << AIC_CR_ISS_BIT)
- #define AIC_CR_ISS_8BIT (0x0 << AIC_CR_ISS_BIT)
- #define AIC_CR_ISS_16BIT (0x1 << AIC_CR_ISS_BIT)
- #define AIC_CR_ISS_18BIT (0x2 << AIC_CR_ISS_BIT)
- #define AIC_CR_ISS_20BIT (0x3 << AIC_CR_ISS_BIT)
- #define AIC_CR_ISS_24BIT (0x4 << AIC_CR_ISS_BIT)
-#define AIC_CR_RDMS (1 << 15) /* Receive DMA enable */
-#define AIC_CR_TDMS (1 << 14) /* Transmit DMA enable */
-#define AIC_CR_M2S (1 << 11) /* Mono to Stereo enable */
-#define AIC_CR_ENDSW (1 << 10) /* Endian switch enable */
-#define AIC_CR_AVSTSU (1 << 9) /* Signed <-> Unsigned toggle enable */
-#define AIC_CR_FLUSH (1 << 8) /* Flush FIFO */
-#define AIC_CR_EROR (1 << 6) /* Enable ROR interrupt */
-#define AIC_CR_ETUR (1 << 5) /* Enable TUR interrupt */
-#define AIC_CR_ERFS (1 << 4) /* Enable RFS interrupt */
-#define AIC_CR_ETFS (1 << 3) /* Enable TFS interrupt */
-#define AIC_CR_ENLBF (1 << 2) /* Enable Loopback Function */
-#define AIC_CR_ERPL (1 << 1) /* Enable Playback Function */
-#define AIC_CR_EREC (1 << 0) /* Enable Record Function */
-
-/* AIC Controller AC-link Control Register 1 (AIC_ACCR1) */
-
-#define AIC_ACCR1_RS_BIT 16 /* Receive Valid Slots */
-#define AIC_ACCR1_RS_MASK (0x3ff << AIC_ACCR1_RS_BIT)
- #define AIC_ACCR1_RS_SLOT12 (1 << 25) /* Slot 12 valid bit */
- #define AIC_ACCR1_RS_SLOT11 (1 << 24) /* Slot 11 valid bit */
- #define AIC_ACCR1_RS_SLOT10 (1 << 23) /* Slot 10 valid bit */
- #define AIC_ACCR1_RS_SLOT9 (1 << 22) /* Slot 9 valid bit, LFE */
- #define AIC_ACCR1_RS_SLOT8 (1 << 21) /* Slot 8 valid bit, Surround Right */
- #define AIC_ACCR1_RS_SLOT7 (1 << 20) /* Slot 7 valid bit, Surround Left */
- #define AIC_ACCR1_RS_SLOT6 (1 << 19) /* Slot 6 valid bit, PCM Center */
- #define AIC_ACCR1_RS_SLOT5 (1 << 18) /* Slot 5 valid bit */
- #define AIC_ACCR1_RS_SLOT4 (1 << 17) /* Slot 4 valid bit, PCM Right */
- #define AIC_ACCR1_RS_SLOT3 (1 << 16) /* Slot 3 valid bit, PCM Left */
-#define AIC_ACCR1_XS_BIT 0 /* Transmit Valid Slots */
-#define AIC_ACCR1_XS_MASK (0x3ff << AIC_ACCR1_XS_BIT)
- #define AIC_ACCR1_XS_SLOT12 (1 << 9) /* Slot 12 valid bit */
- #define AIC_ACCR1_XS_SLOT11 (1 << 8) /* Slot 11 valid bit */
- #define AIC_ACCR1_XS_SLOT10 (1 << 7) /* Slot 10 valid bit */
- #define AIC_ACCR1_XS_SLOT9 (1 << 6) /* Slot 9 valid bit, LFE */
- #define AIC_ACCR1_XS_SLOT8 (1 << 5) /* Slot 8 valid bit, Surround Right */
- #define AIC_ACCR1_XS_SLOT7 (1 << 4) /* Slot 7 valid bit, Surround Left */
- #define AIC_ACCR1_XS_SLOT6 (1 << 3) /* Slot 6 valid bit, PCM Center */
- #define AIC_ACCR1_XS_SLOT5 (1 << 2) /* Slot 5 valid bit */
- #define AIC_ACCR1_XS_SLOT4 (1 << 1) /* Slot 4 valid bit, PCM Right */
- #define AIC_ACCR1_XS_SLOT3 (1 << 0) /* Slot 3 valid bit, PCM Left */
-
-/* AIC Controller AC-link Control Register 2 (AIC_ACCR2) */
-
-#define AIC_ACCR2_ERSTO (1 << 18) /* Enable RSTO interrupt */
-#define AIC_ACCR2_ESADR (1 << 17) /* Enable SADR interrupt */
-#define AIC_ACCR2_ECADT (1 << 16) /* Enable CADT interrupt */
-#define AIC_ACCR2_OASS_BIT 8 /* Output Sample Size for AC-link */
-#define AIC_ACCR2_OASS_MASK (0x3 << AIC_ACCR2_OASS_BIT)
- #define AIC_ACCR2_OASS_20BIT (0 << AIC_ACCR2_OASS_BIT) /* Output Audio Sample Size is 20-bit */
- #define AIC_ACCR2_OASS_18BIT (1 << AIC_ACCR2_OASS_BIT) /* Output Audio Sample Size is 18-bit */
- #define AIC_ACCR2_OASS_16BIT (2 << AIC_ACCR2_OASS_BIT) /* Output Audio Sample Size is 16-bit */
- #define AIC_ACCR2_OASS_8BIT (3 << AIC_ACCR2_OASS_BIT) /* Output Audio Sample Size is 8-bit */
-#define AIC_ACCR2_IASS_BIT 6 /* Output Sample Size for AC-link */
-#define AIC_ACCR2_IASS_MASK (0x3 << AIC_ACCR2_IASS_BIT)
- #define AIC_ACCR2_IASS_20BIT (0 << AIC_ACCR2_IASS_BIT) /* Input Audio Sample Size is 20-bit */
- #define AIC_ACCR2_IASS_18BIT (1 << AIC_ACCR2_IASS_BIT) /* Input Audio Sample Size is 18-bit */
- #define AIC_ACCR2_IASS_16BIT (2 << AIC_ACCR2_IASS_BIT) /* Input Audio Sample Size is 16-bit */
- #define AIC_ACCR2_IASS_8BIT (3 << AIC_ACCR2_IASS_BIT) /* Input Audio Sample Size is 8-bit */
-#define AIC_ACCR2_SO (1 << 3) /* SDATA_OUT output value */
-#define AIC_ACCR2_SR (1 << 2) /* RESET# pin level */
-#define AIC_ACCR2_SS (1 << 1) /* SYNC pin level */
-#define AIC_ACCR2_SA (1 << 0) /* SYNC and SDATA_OUT alternation */
-
-/* AIC Controller I2S/MSB-justified Control Register (AIC_I2SCR) */
-
-#define AIC_I2SCR_STPBK (1 << 12) /* Stop BIT_CLK for I2S/MSB-justified */
-#define AIC_I2SCR_WL_BIT 1 /* Input/Output Sample Size for I2S/MSB-justified */
-#define AIC_I2SCR_WL_MASK (0x7 << AIC_I2SCR_WL_BIT)
- #define AIC_I2SCR_WL_24BIT (0 << AIC_I2SCR_WL_BIT) /* Word Length is 24 bit */
- #define AIC_I2SCR_WL_20BIT (1 << AIC_I2SCR_WL_BIT) /* Word Length is 20 bit */
- #define AIC_I2SCR_WL_18BIT (2 << AIC_I2SCR_WL_BIT) /* Word Length is 18 bit */
- #define AIC_I2SCR_WL_16BIT (3 << AIC_I2SCR_WL_BIT) /* Word Length is 16 bit */
- #define AIC_I2SCR_WL_8BIT (4 << AIC_I2SCR_WL_BIT) /* Word Length is 8 bit */
-#define AIC_I2SCR_AMSL (1 << 0) /* 0:I2S, 1:MSB-justified */
-
-/* AIC Controller FIFO Status Register (AIC_SR) */
-
-#define AIC_SR_RFL_BIT 24 /* Receive FIFO Level */
-#define AIC_SR_RFL_MASK (0x3f << AIC_SR_RFL_BIT)
-#define AIC_SR_TFL_BIT 8 /* Transmit FIFO level */
-#define AIC_SR_TFL_MASK (0x3f << AIC_SR_TFL_BIT)
-#define AIC_SR_ROR (1 << 6) /* Receive FIFO Overrun */
-#define AIC_SR_TUR (1 << 5) /* Transmit FIFO Underrun */
-#define AIC_SR_RFS (1 << 4) /* Receive FIFO Service Request */
-#define AIC_SR_TFS (1 << 3) /* Transmit FIFO Service Request */
-
-/* AIC Controller AC-link Status Register (AIC_ACSR) */
-
-#define AIC_ACSR_SLTERR (1 << 21) /* Slot Error Flag */
-#define AIC_ACSR_CRDY (1 << 20) /* External CODEC Ready Flag */
-#define AIC_ACSR_CLPM (1 << 19) /* External CODEC low power mode flag */
-#define AIC_ACSR_RSTO (1 << 18) /* External CODEC regs read status timeout */
-#define AIC_ACSR_SADR (1 << 17) /* External CODEC regs status addr and data received */
-#define AIC_ACSR_CADT (1 << 16) /* Command Address and Data Transmitted */
-
-/* AIC Controller I2S/MSB-justified Status Register (AIC_I2SSR) */
-
-#define AIC_I2SSR_BSY (1 << 2) /* AIC Busy in I2S/MSB-justified format */
-
-/* AIC Controller AC97 codec Command Address Register (AIC_ACCAR) */
-
-#define AIC_ACCAR_CAR_BIT 0
-#define AIC_ACCAR_CAR_MASK (0xfffff << AIC_ACCAR_CAR_BIT)
-
-/* AIC Controller AC97 codec Command Data Register (AIC_ACCDR) */
-
-#define AIC_ACCDR_CDR_BIT 0
-#define AIC_ACCDR_CDR_MASK (0xfffff << AIC_ACCDR_CDR_BIT)
-
-/* AIC Controller AC97 codec Status Address Register (AIC_ACSAR) */
-
-#define AIC_ACSAR_SAR_BIT 0
-#define AIC_ACSAR_SAR_MASK (0xfffff << AIC_ACSAR_SAR_BIT)
-
-/* AIC Controller AC97 codec Status Data Register (AIC_ACSDR) */
-
-#define AIC_ACSDR_SDR_BIT 0
-#define AIC_ACSDR_SDR_MASK (0xfffff << AIC_ACSDR_SDR_BIT)
-
-/* AIC Controller I2S/MSB-justified Clock Divider Register (AIC_I2SDIV) */
-
-#define AIC_I2SDIV_DIV_BIT 0
-#define AIC_I2SDIV_DIV_MASK (0x7f << AIC_I2SDIV_DIV_BIT)
- #define AIC_I2SDIV_BITCLK_3072KHZ (0x0C << AIC_I2SDIV_DIV_BIT) /* BIT_CLK of 3.072MHz */
- #define AIC_I2SDIV_BITCLK_2836KHZ (0x0D << AIC_I2SDIV_DIV_BIT) /* BIT_CLK of 2.836MHz */
- #define AIC_I2SDIV_BITCLK_1418KHZ (0x1A << AIC_I2SDIV_DIV_BIT) /* BIT_CLK of 1.418MHz */
- #define AIC_I2SDIV_BITCLK_1024KHZ (0x24 << AIC_I2SDIV_DIV_BIT) /* BIT_CLK of 1.024MHz */
- #define AIC_I2SDIV_BITCLK_7089KHZ (0x34 << AIC_I2SDIV_DIV_BIT) /* BIT_CLK of 708.92KHz */
- #define AIC_I2SDIV_BITCLK_512KHZ (0x48 << AIC_I2SDIV_DIV_BIT) /* BIT_CLK of 512.00KHz */
-
-
-/*************************************************************************
- * ICDC (Internal CODEC)
- *************************************************************************/
-#define ICDC_CR (ICDC_BASE + 0x0400) /* ICDC Control Register */
-#define ICDC_APWAIT (ICDC_BASE + 0x0404) /* Anti-Pop WAIT Stage Timing Control Register */
-#define ICDC_APPRE (ICDC_BASE + 0x0408) /* Anti-Pop HPEN-PRE Stage Timing Control Register */
-#define ICDC_APHPEN (ICDC_BASE + 0x040C) /* Anti-Pop HPEN Stage Timing Control Register */
-#define ICDC_APSR (ICDC_BASE + 0x0410) /* Anti-Pop Status Register */
-#define ICDC_CDCCR1 (ICDC_BASE + 0x0080)
-#define ICDC_CDCCR2 (ICDC_BASE + 0x0084)
-
-#define REG_ICDC_CR REG32(ICDC_CR)
-#define REG_ICDC_APWAIT REG32(ICDC_APWAIT)
-#define REG_ICDC_APPRE REG32(ICDC_APPRE)
-#define REG_ICDC_APHPEN REG32(ICDC_APHPEN)
-#define REG_ICDC_APSR REG32(ICDC_APSR)
-#define REG_ICDC_CDCCR1 REG32(ICDC_CDCCR1)
-#define REG_ICDC_CDCCR2 REG32(ICDC_CDCCR2)
-
-/* ICDC Control Register */
-#define ICDC_CR_LINVOL_BIT 24 /* LINE Input Volume Gain: GAIN=LINVOL*1.5-34.5 */
-#define ICDC_CR_LINVOL_MASK (0x1f << ICDC_CR_LINVOL_BIT)
-#define ICDC_CR_ASRATE_BIT 20 /* Audio Sample Rate */
-#define ICDC_CR_ASRATE_MASK (0x0f << ICDC_CR_ASRATE_BIT)
- #define ICDC_CR_ASRATE_8000 (0x0 << ICDC_CR_ASRATE_BIT)
- #define ICDC_CR_ASRATE_11025 (0x1 << ICDC_CR_ASRATE_BIT)
- #define ICDC_CR_ASRATE_12000 (0x2 << ICDC_CR_ASRATE_BIT)
- #define ICDC_CR_ASRATE_16000 (0x3 << ICDC_CR_ASRATE_BIT)
- #define ICDC_CR_ASRATE_22050 (0x4 << ICDC_CR_ASRATE_BIT)
- #define ICDC_CR_ASRATE_24000 (0x5 << ICDC_CR_ASRATE_BIT)
- #define ICDC_CR_ASRATE_32000 (0x6 << ICDC_CR_ASRATE_BIT)
- #define ICDC_CR_ASRATE_44100 (0x7 << ICDC_CR_ASRATE_BIT)
- #define ICDC_CR_ASRATE_48000 (0x8 << ICDC_CR_ASRATE_BIT)
-#define ICDC_CR_MICBG_BIT 18 /* MIC Boost Gain */
-#define ICDC_CR_MICBG_MASK (0x3 << ICDC_CR_MICBG_BIT)
- #define ICDC_CR_MICBG_0DB (0x0 << ICDC_CR_MICBG_BIT)
- #define ICDC_CR_MICBG_6DB (0x1 << ICDC_CR_MICBG_BIT)
- #define ICDC_CR_MICBG_12DB (0x2 << ICDC_CR_MICBG_BIT)
- #define ICDC_CR_MICBG_20DB (0x3 << ICDC_CR_MICBG_BIT)
-#define ICDC_CR_HPVOL_BIT 16 /* Headphone Volume Gain */
-#define ICDC_CR_HPVOL_MASK (0x3 << ICDC_CR_HPVOL_BIT)
- #define ICDC_CR_HPVOL_0DB (0x0 << ICDC_CR_HPVOL_BIT)
- #define ICDC_CR_HPVOL_2DB (0x1 << ICDC_CR_HPVOL_BIT)
- #define ICDC_CR_HPVOL_4DB (0x2 << ICDC_CR_HPVOL_BIT)
- #define ICDC_CR_HPVOL_6DB (0x3 << ICDC_CR_HPVOL_BIT)
-#define ICDC_CR_ELINEIN (1 << 13) /* Enable LINE Input */
-#define ICDC_CR_EMIC (1 << 12) /* Enable MIC Input */
-#define ICDC_CR_SW1ON (1 << 11) /* Switch 1 in CODEC is on */
-#define ICDC_CR_EADC (1 << 10) /* Enable ADC */
-#define ICDC_CR_SW2ON (1 << 9) /* Switch 2 in CODEC is on */
-#define ICDC_CR_EDAC (1 << 8) /* Enable DAC */
-#define ICDC_CR_HPMUTE (1 << 5) /* Headphone Mute */
-#define ICDC_CR_HPTON (1 << 4) /* Headphone Amplifier Trun On */
-#define ICDC_CR_HPTOFF (1 << 3) /* Headphone Amplifier Trun Off */
-#define ICDC_CR_TAAP (1 << 2) /* Turn Around of the Anti-Pop Procedure */
-#define ICDC_CR_EAP (1 << 1) /* Enable Anti-Pop Procedure */
-#define ICDC_CR_SUSPD (1 << 0) /* CODEC Suspend */
-
-/* Anti-Pop WAIT Stage Timing Control Register */
-#define ICDC_APWAIT_WAITSN_BIT 0
-#define ICDC_APWAIT_WAITSN_MASK (0x7ff << ICDC_APWAIT_WAITSN_BIT)
-
-/* Anti-Pop HPEN-PRE Stage Timing Control Register */
-#define ICDC_APPRE_PRESN_BIT 0
-#define ICDC_APPRE_PRESN_MASK (0x1ff << ICDC_APPRE_PRESN_BIT)
-
-/* Anti-Pop HPEN Stage Timing Control Register */
-#define ICDC_APHPEN_HPENSN_BIT 0
-#define ICDC_APHPEN_HPENSN_MASK (0x3fff << ICDC_APHPEN_HPENSN_BIT)
-
-/* Anti-Pop Status Register */
-#define ICDC_SR_HPST_BIT 14 /* Headphone Amplifier State */
-#define ICDC_SR_HPST_MASK (0x7 << ICDC_SR_HPST_BIT)
-#define ICDC_SR_HPST_HP_OFF (0x0 << ICDC_SR_HPST_BIT) /* HP amplifier is off */
-#define ICDC_SR_HPST_TON_WAIT (0x1 << ICDC_SR_HPST_BIT) /* wait state in turn-on */
- #define ICDC_SR_HPST_TON_PRE (0x2 << ICDC_SR_HPST_BIT) /* pre-enable state in turn-on */
-#define ICDC_SR_HPST_TON_HPEN (0x3 << ICDC_SR_HPST_BIT) /* HP enable state in turn-on */
- #define ICDC_SR_HPST_TOFF_HPEN (0x4 << ICDC_SR_HPST_BIT) /* HP enable state in turn-off */
- #define ICDC_SR_HPST_TOFF_PRE (0x5 << ICDC_SR_HPST_BIT) /* pre-enable state in turn-off */
- #define ICDC_SR_HPST_TOFF_WAIT (0x6 << ICDC_SR_HPST_BIT) /* wait state in turn-off */
- #define ICDC_SR_HPST_HP_ON (0x7 << ICDC_SR_HPST_BIT) /* HP amplifier is on */
-#define ICDC_SR_SNCNT_BIT 0 /* Sample Number Counter */
-#define ICDC_SR_SNCNT_MASK (0x3fff << ICDC_SR_SNCNT_BIT)
-
-
-/*************************************************************************
- * I2C
- *************************************************************************/
-#define I2C_DR (I2C_BASE + 0x000)
-#define I2C_CR (I2C_BASE + 0x004)
-#define I2C_SR (I2C_BASE + 0x008)
-#define I2C_GR (I2C_BASE + 0x00C)
-
-#define REG_I2C_DR REG8(I2C_DR)
-#define REG_I2C_CR REG8(I2C_CR)
-#define REG_I2C_SR REG8(I2C_SR)
-#define REG_I2C_GR REG16(I2C_GR)
-
-/* I2C Control Register (I2C_CR) */
-
-#define I2C_CR_IEN (1 << 4)
-#define I2C_CR_STA (1 << 3)
-#define I2C_CR_STO (1 << 2)
-#define I2C_CR_AC (1 << 1)
-#define I2C_CR_I2CE (1 << 0)
-
-/* I2C Status Register (I2C_SR) */
-
-#define I2C_SR_STX (1 << 4)
-#define I2C_SR_BUSY (1 << 3)
-#define I2C_SR_TEND (1 << 2)
-#define I2C_SR_DRF (1 << 1)
-#define I2C_SR_ACKF (1 << 0)
-
-
-/*************************************************************************
- * SSI
- *************************************************************************/
-#define SSI_DR (SSI_BASE + 0x000)
-#define SSI_CR0 (SSI_BASE + 0x004)
-#define SSI_CR1 (SSI_BASE + 0x008)
-#define SSI_SR (SSI_BASE + 0x00C)
-#define SSI_ITR (SSI_BASE + 0x010)
-#define SSI_ICR (SSI_BASE + 0x014)
-#define SSI_GR (SSI_BASE + 0x018)
-
-#define REG_SSI_DR REG32(SSI_DR)
-#define REG_SSI_CR0 REG16(SSI_CR0)
-#define REG_SSI_CR1 REG32(SSI_CR1)
-#define REG_SSI_SR REG32(SSI_SR)
-#define REG_SSI_ITR REG16(SSI_ITR)
-#define REG_SSI_ICR REG8(SSI_ICR)
-#define REG_SSI_GR REG16(SSI_GR)
-
-/* SSI Data Register (SSI_DR) */
-
-#define SSI_DR_GPC_BIT 0
-#define SSI_DR_GPC_MASK (0x1ff << SSI_DR_GPC_BIT)
-
-/* SSI Control Register 0 (SSI_CR0) */
-
-#define SSI_CR0_SSIE (1 << 15)
-#define SSI_CR0_TIE (1 << 14)
-#define SSI_CR0_RIE (1 << 13)
-#define SSI_CR0_TEIE (1 << 12)
-#define SSI_CR0_REIE (1 << 11)
-#define SSI_CR0_LOOP (1 << 10)
-#define SSI_CR0_RFINE (1 << 9)
-#define SSI_CR0_RFINC (1 << 8)
-#define SSI_CR0_FSEL (1 << 6)
-#define SSI_CR0_TFLUSH (1 << 2)
-#define SSI_CR0_RFLUSH (1 << 1)
-#define SSI_CR0_DISREV (1 << 0)
-
-/* SSI Control Register 1 (SSI_CR1) */
-
-#define SSI_CR1_FRMHL_BIT 30
-#define SSI_CR1_FRMHL_MASK (0x3 << SSI_CR1_FRMHL_BIT)
- #define SSI_CR1_FRMHL_CELOW_CE2LOW (0 << SSI_CR1_FRMHL_BIT) /* SSI_CE_ is low valid and SSI_CE2_ is low valid */
- #define SSI_CR1_FRMHL_CEHIGH_CE2LOW (1 << SSI_CR1_FRMHL_BIT) /* SSI_CE_ is high valid and SSI_CE2_ is low valid */
- #define SSI_CR1_FRMHL_CELOW_CE2HIGH (2 << SSI_CR1_FRMHL_BIT) /* SSI_CE_ is low valid and SSI_CE2_ is high valid */
- #define SSI_CR1_FRMHL_CEHIGH_CE2HIGH (3 << SSI_CR1_FRMHL_BIT) /* SSI_CE_ is high valid and SSI_CE2_ is high valid */
-#define SSI_CR1_TFVCK_BIT 28
-#define SSI_CR1_TFVCK_MASK (0x3 << SSI_CR1_TFVCK_BIT)
- #define SSI_CR1_TFVCK_0 (0 << SSI_CR1_TFVCK_BIT)
- #define SSI_CR1_TFVCK_1 (1 << SSI_CR1_TFVCK_BIT)
- #define SSI_CR1_TFVCK_2 (2 << SSI_CR1_TFVCK_BIT)
- #define SSI_CR1_TFVCK_3 (3 << SSI_CR1_TFVCK_BIT)
-#define SSI_CR1_TCKFI_BIT 26
-#define SSI_CR1_TCKFI_MASK (0x3 << SSI_CR1_TCKFI_BIT)
- #define SSI_CR1_TCKFI_0 (0 << SSI_CR1_TCKFI_BIT)
- #define SSI_CR1_TCKFI_1 (1 << SSI_CR1_TCKFI_BIT)
- #define SSI_CR1_TCKFI_2 (2 << SSI_CR1_TCKFI_BIT)
- #define SSI_CR1_TCKFI_3 (3 << SSI_CR1_TCKFI_BIT)
-#define SSI_CR1_LFST (1 << 25)
-#define SSI_CR1_ITFRM (1 << 24)
-#define SSI_CR1_UNFIN (1 << 23)
-#define SSI_CR1_MULTS (1 << 22)
-#define SSI_CR1_FMAT_BIT 20
-#define SSI_CR1_FMAT_MASK (0x3 << SSI_CR1_FMAT_BIT)
- #define SSI_CR1_FMAT_SPI (0 << SSI_CR1_FMAT_BIT) /* Motorola¡¯s SPI format */
- #define SSI_CR1_FMAT_SSP (1 << SSI_CR1_FMAT_BIT) /* TI's SSP format */
- #define SSI_CR1_FMAT_MW1 (2 << SSI_CR1_FMAT_BIT) /* National Microwire 1 format */
- #define SSI_CR1_FMAT_MW2 (3 << SSI_CR1_FMAT_BIT) /* National Microwire 2 format */
-#define SSI_CR1_TTRG_BIT 16
-#define SSI_CR1_TTRG_MASK (0xf << SSI_CR1_TTRG_BIT)
- #define SSI_CR1_TTRG_1 (0 << SSI_CR1_TTRG_BIT)
- #define SSI_CR1_TTRG_8 (1 << SSI_CR1_TTRG_BIT)
- #define SSI_CR1_TTRG_16 (2 << SSI_CR1_TTRG_BIT)
- #define SSI_CR1_TTRG_24 (3 << SSI_CR1_TTRG_BIT)
- #define SSI_CR1_TTRG_32 (4 << SSI_CR1_TTRG_BIT)
- #define SSI_CR1_TTRG_40 (5 << SSI_CR1_TTRG_BIT)
- #define SSI_CR1_TTRG_48 (6 << SSI_CR1_TTRG_BIT)
- #define SSI_CR1_TTRG_56 (7 << SSI_CR1_TTRG_BIT)
- #define SSI_CR1_TTRG_64 (8 << SSI_CR1_TTRG_BIT)
- #define SSI_CR1_TTRG_72 (9 << SSI_CR1_TTRG_BIT)
- #define SSI_CR1_TTRG_80 (10<< SSI_CR1_TTRG_BIT)
- #define SSI_CR1_TTRG_88 (11<< SSI_CR1_TTRG_BIT)
- #define SSI_CR1_TTRG_96 (12<< SSI_CR1_TTRG_BIT)
- #define SSI_CR1_TTRG_104 (13<< SSI_CR1_TTRG_BIT)
- #define SSI_CR1_TTRG_112 (14<< SSI_CR1_TTRG_BIT)
- #define SSI_CR1_TTRG_120 (15<< SSI_CR1_TTRG_BIT)
-#define SSI_CR1_MCOM_BIT 12
-#define SSI_CR1_MCOM_MASK (0xf << SSI_CR1_MCOM_BIT)
- #define SSI_CR1_MCOM_1BIT (0x0 << SSI_CR1_MCOM_BIT) /* 1-bit command selected */
- #define SSI_CR1_MCOM_2BIT (0x1 << SSI_CR1_MCOM_BIT) /* 2-bit command selected */
- #define SSI_CR1_MCOM_3BIT (0x2 << SSI_CR1_MCOM_BIT) /* 3-bit command selected */
- #define SSI_CR1_MCOM_4BIT (0x3 << SSI_CR1_MCOM_BIT) /* 4-bit command selected */
- #define SSI_CR1_MCOM_5BIT (0x4 << SSI_CR1_MCOM_BIT) /* 5-bit command selected */
- #define SSI_CR1_MCOM_6BIT (0x5 << SSI_CR1_MCOM_BIT) /* 6-bit command selected */
- #define SSI_CR1_MCOM_7BIT (0x6 << SSI_CR1_MCOM_BIT) /* 7-bit command selected */
- #define SSI_CR1_MCOM_8BIT (0x7 << SSI_CR1_MCOM_BIT) /* 8-bit command selected */
- #define SSI_CR1_MCOM_9BIT (0x8 << SSI_CR1_MCOM_BIT) /* 9-bit command selected */
- #define SSI_CR1_MCOM_10BIT (0x9 << SSI_CR1_MCOM_BIT) /* 10-bit command selected */
- #define SSI_CR1_MCOM_11BIT (0xA << SSI_CR1_MCOM_BIT) /* 11-bit command selected */
- #define SSI_CR1_MCOM_12BIT (0xB << SSI_CR1_MCOM_BIT) /* 12-bit command selected */
- #define SSI_CR1_MCOM_13BIT (0xC << SSI_CR1_MCOM_BIT) /* 13-bit command selected */
- #define SSI_CR1_MCOM_14BIT (0xD << SSI_CR1_MCOM_BIT) /* 14-bit command selected */
- #define SSI_CR1_MCOM_15BIT (0xE << SSI_CR1_MCOM_BIT) /* 15-bit command selected */
- #define SSI_CR1_MCOM_16BIT (0xF << SSI_CR1_MCOM_BIT) /* 16-bit command selected */
-#define SSI_CR1_RTRG_BIT 8
-#define SSI_CR1_RTRG_MASK (0xf << SSI_CR1_RTRG_BIT)
- #define SSI_CR1_RTRG_1 (0 << SSI_CR1_RTRG_BIT)
- #define SSI_CR1_RTRG_8 (1 << SSI_CR1_RTRG_BIT)
- #define SSI_CR1_RTRG_16 (2 << SSI_CR1_RTRG_BIT)
- #define SSI_CR1_RTRG_24 (3 << SSI_CR1_RTRG_BIT)
- #define SSI_CR1_RTRG_32 (4 << SSI_CR1_RTRG_BIT)
- #define SSI_CR1_RTRG_40 (5 << SSI_CR1_RTRG_BIT)
- #define SSI_CR1_RTRG_48 (6 << SSI_CR1_RTRG_BIT)
- #define SSI_CR1_RTRG_56 (7 << SSI_CR1_RTRG_BIT)
- #define SSI_CR1_RTRG_64 (8 << SSI_CR1_RTRG_BIT)
- #define SSI_CR1_RTRG_72 (9 << SSI_CR1_RTRG_BIT)
- #define SSI_CR1_RTRG_80 (10<< SSI_CR1_RTRG_BIT)
- #define SSI_CR1_RTRG_88 (11<< SSI_CR1_RTRG_BIT)
- #define SSI_CR1_RTRG_96 (12<< SSI_CR1_RTRG_BIT)
- #define SSI_CR1_RTRG_104 (13<< SSI_CR1_RTRG_BIT)
- #define SSI_CR1_RTRG_112 (14<< SSI_CR1_RTRG_BIT)
- #define SSI_CR1_RTRG_120 (15<< SSI_CR1_RTRG_BIT)
-#define SSI_CR1_FLEN_BIT 4
-#define SSI_CR1_FLEN_MASK (0xf << SSI_CR1_FLEN_BIT)
- #define SSI_CR1_FLEN_2BIT (0x0 << SSI_CR1_FLEN_BIT)
- #define SSI_CR1_FLEN_3BIT (0x1 << SSI_CR1_FLEN_BIT)
- #define SSI_CR1_FLEN_4BIT (0x2 << SSI_CR1_FLEN_BIT)
- #define SSI_CR1_FLEN_5BIT (0x3 << SSI_CR1_FLEN_BIT)
- #define SSI_CR1_FLEN_6BIT (0x4 << SSI_CR1_FLEN_BIT)
- #define SSI_CR1_FLEN_7BIT (0x5 << SSI_CR1_FLEN_BIT)
- #define SSI_CR1_FLEN_8BIT (0x6 << SSI_CR1_FLEN_BIT)
- #define SSI_CR1_FLEN_9BIT (0x7 << SSI_CR1_FLEN_BIT)
- #define SSI_CR1_FLEN_10BIT (0x8 << SSI_CR1_FLEN_BIT)
- #define SSI_CR1_FLEN_11BIT (0x9 << SSI_CR1_FLEN_BIT)
- #define SSI_CR1_FLEN_12BIT (0xA << SSI_CR1_FLEN_BIT)
- #define SSI_CR1_FLEN_13BIT (0xB << SSI_CR1_FLEN_BIT)
- #define SSI_CR1_FLEN_14BIT (0xC << SSI_CR1_FLEN_BIT)
- #define SSI_CR1_FLEN_15BIT (0xD << SSI_CR1_FLEN_BIT)
- #define SSI_CR1_FLEN_16BIT (0xE << SSI_CR1_FLEN_BIT)
- #define SSI_CR1_FLEN_17BIT (0xF << SSI_CR1_FLEN_BIT)
-#define SSI_CR1_PHA (1 << 1)
-#define SSI_CR1_POL (1 << 0)
-
-/* SSI Status Register (SSI_SR) */
-
-#define SSI_SR_TFIFONUM_BIT 16
-#define SSI_SR_TFIFONUM_MASK (0xff << SSI_SR_TFIFONUM_BIT)
-#define SSI_SR_RFIFONUM_BIT 8
-#define SSI_SR_RFIFONUM_MASK (0xff << SSI_SR_RFIFONUM_BIT)
-#define SSI_SR_END (1 << 7)
-#define SSI_SR_BUSY (1 << 6)
-#define SSI_SR_TFF (1 << 5)
-#define SSI_SR_RFE (1 << 4)
-#define SSI_SR_TFHE (1 << 3)
-#define SSI_SR_RFHF (1 << 2)
-#define SSI_SR_UNDR (1 << 1)
-#define SSI_SR_OVER (1 << 0)
-
-/* SSI Interval Time Control Register (SSI_ITR) */
-
-#define SSI_ITR_CNTCLK (1 << 15)
-#define SSI_ITR_IVLTM_BIT 0
-#define SSI_ITR_IVLTM_MASK (0x7fff << SSI_ITR_IVLTM_BIT)
-
-
-/*************************************************************************
- * MSC
- *************************************************************************/
-#define MSC_STRPCL (MSC_BASE + 0x000)
-#define MSC_STAT (MSC_BASE + 0x004)
-#define MSC_CLKRT (MSC_BASE + 0x008)
-#define MSC_CMDAT (MSC_BASE + 0x00C)
-#define MSC_RESTO (MSC_BASE + 0x010)
-#define MSC_RDTO (MSC_BASE + 0x014)
-#define MSC_BLKLEN (MSC_BASE + 0x018)
-#define MSC_NOB (MSC_BASE + 0x01C)
-#define MSC_SNOB (MSC_BASE + 0x020)
-#define MSC_IMASK (MSC_BASE + 0x024)
-#define MSC_IREG (MSC_BASE + 0x028)
-#define MSC_CMD (MSC_BASE + 0x02C)
-#define MSC_ARG (MSC_BASE + 0x030)
-#define MSC_RES (MSC_BASE + 0x034)
-#define MSC_RXFIFO (MSC_BASE + 0x038)
-#define MSC_TXFIFO (MSC_BASE + 0x03C)
-
-#define REG_MSC_STRPCL REG16(MSC_STRPCL)
-#define REG_MSC_STAT REG32(MSC_STAT)
-#define REG_MSC_CLKRT REG16(MSC_CLKRT)
-#define REG_MSC_CMDAT REG32(MSC_CMDAT)
-#define REG_MSC_RESTO REG16(MSC_RESTO)
-#define REG_MSC_RDTO REG16(MSC_RDTO)
-#define REG_MSC_BLKLEN REG16(MSC_BLKLEN)
-#define REG_MSC_NOB REG16(MSC_NOB)
-#define REG_MSC_SNOB REG16(MSC_SNOB)
-#define REG_MSC_IMASK REG16(MSC_IMASK)
-#define REG_MSC_IREG REG16(MSC_IREG)
-#define REG_MSC_CMD REG8(MSC_CMD)
-#define REG_MSC_ARG REG32(MSC_ARG)
-#define REG_MSC_RES REG16(MSC_RES)
-#define REG_MSC_RXFIFO REG32(MSC_RXFIFO)
-#define REG_MSC_TXFIFO REG32(MSC_TXFIFO)
-
-/* MSC Clock and Control Register (MSC_STRPCL) */
-
-#define MSC_STRPCL_EXIT_MULTIPLE (1 << 7)
-#define MSC_STRPCL_EXIT_TRANSFER (1 << 6)
-#define MSC_STRPCL_START_READWAIT (1 << 5)
-#define MSC_STRPCL_STOP_READWAIT (1 << 4)
-#define MSC_STRPCL_RESET (1 << 3)
-#define MSC_STRPCL_START_OP (1 << 2)
-#define MSC_STRPCL_CLOCK_CONTROL_BIT 0
-#define MSC_STRPCL_CLOCK_CONTROL_MASK (0x3 << MSC_STRPCL_CLOCK_CONTROL_BIT)
- #define MSC_STRPCL_CLOCK_CONTROL_STOP (0x1 << MSC_STRPCL_CLOCK_CONTROL_BIT) /* Stop MMC/SD clock */
- #define MSC_STRPCL_CLOCK_CONTROL_START (0x2 << MSC_STRPCL_CLOCK_CONTROL_BIT) /* Start MMC/SD clock */
-
-/* MSC Status Register (MSC_STAT) */
-
-#define MSC_STAT_IS_RESETTING (1 << 15)
-#define MSC_STAT_SDIO_INT_ACTIVE (1 << 14)
-#define MSC_STAT_PRG_DONE (1 << 13)
-#define MSC_STAT_DATA_TRAN_DONE (1 << 12)
-#define MSC_STAT_END_CMD_RES (1 << 11)
-#define MSC_STAT_DATA_FIFO_AFULL (1 << 10)
-#define MSC_STAT_IS_READWAIT (1 << 9)
-#define MSC_STAT_CLK_EN (1 << 8)
-#define MSC_STAT_DATA_FIFO_FULL (1 << 7)
-#define MSC_STAT_DATA_FIFO_EMPTY (1 << 6)
-#define MSC_STAT_CRC_RES_ERR (1 << 5)
-#define MSC_STAT_CRC_READ_ERROR (1 << 4)
-#define MSC_STAT_CRC_WRITE_ERROR_BIT 2
-#define MSC_STAT_CRC_WRITE_ERROR_MASK (0x3 << MSC_STAT_CRC_WRITE_ERROR_BIT)
- #define MSC_STAT_CRC_WRITE_ERROR_NO (0 << MSC_STAT_CRC_WRITE_ERROR_BIT) /* No error on transmission of data */
- #define MSC_STAT_CRC_WRITE_ERROR (1 << MSC_STAT_CRC_WRITE_ERROR_BIT) /* Card observed erroneous transmission of data */
- #define MSC_STAT_CRC_WRITE_ERROR_NOSTS (2 << MSC_STAT_CRC_WRITE_ERROR_BIT) /* No CRC status is sent back */
-#define MSC_STAT_TIME_OUT_RES (1 << 1)
-#define MSC_STAT_TIME_OUT_READ (1 << 0)
-
-/* MSC Bus Clock Control Register (MSC_CLKRT) */
-
-#define MSC_CLKRT_CLK_RATE_BIT 0
-#define MSC_CLKRT_CLK_RATE_MASK (0x7 << MSC_CLKRT_CLK_RATE_BIT)
- #define MSC_CLKRT_CLK_RATE_DIV_1 (0x0 << MSC_CLKRT_CLK_RATE_BIT) /* CLK_SRC */
- #define MSC_CLKRT_CLK_RATE_DIV_2 (0x1 << MSC_CLKRT_CLK_RATE_BIT) /* 1/2 of CLK_SRC */
- #define MSC_CLKRT_CLK_RATE_DIV_4 (0x2 << MSC_CLKRT_CLK_RATE_BIT) /* 1/4 of CLK_SRC */
- #define MSC_CLKRT_CLK_RATE_DIV_8 (0x3 << MSC_CLKRT_CLK_RATE_BIT) /* 1/8 of CLK_SRC */
- #define MSC_CLKRT_CLK_RATE_DIV_16 (0x4 << MSC_CLKRT_CLK_RATE_BIT) /* 1/16 of CLK_SRC */
- #define MSC_CLKRT_CLK_RATE_DIV_32 (0x5 << MSC_CLKRT_CLK_RATE_BIT) /* 1/32 of CLK_SRC */
- #define MSC_CLKRT_CLK_RATE_DIV_64 (0x6 << MSC_CLKRT_CLK_RATE_BIT) /* 1/64 of CLK_SRC */
- #define MSC_CLKRT_CLK_RATE_DIV_128 (0x7 << MSC_CLKRT_CLK_RATE_BIT) /* 1/128 of CLK_SRC */
-
-/* MSC Command Sequence Control Register (MSC_CMDAT) */
-
-#define MSC_CMDAT_IO_ABORT (1 << 11)
-#define MSC_CMDAT_BUS_WIDTH_BIT 9
-#define MSC_CMDAT_BUS_WIDTH_MASK (0x3 << MSC_CMDAT_BUS_WIDTH_BIT)
- #define MSC_CMDAT_BUS_WIDTH_1BIT (0x0 << MSC_CMDAT_BUS_WIDTH_BIT) /* 1-bit data bus */
- #define MSC_CMDAT_BUS_WIDTH_4BIT (0x2 << MSC_CMDAT_BUS_WIDTH_BIT) /* 4-bit data bus */
- #define CMDAT_BUS_WIDTH1 (0x0 << MSC_CMDAT_BUS_WIDTH_BIT)
- #define CMDAT_BUS_WIDTH4 (0x2 << MSC_CMDAT_BUS_WIDTH_BIT)
-#define MSC_CMDAT_DMA_EN (1 << 8)
-#define MSC_CMDAT_INIT (1 << 7)
-#define MSC_CMDAT_BUSY (1 << 6)
-#define MSC_CMDAT_STREAM_BLOCK (1 << 5)
-#define MSC_CMDAT_WRITE (1 << 4)
-#define MSC_CMDAT_READ (0 << 4)
-#define MSC_CMDAT_DATA_EN (1 << 3)
-#define MSC_CMDAT_RESPONSE_BIT 0
-#define MSC_CMDAT_RESPONSE_MASK (0x7 << MSC_CMDAT_RESPONSE_BIT)
- #define MSC_CMDAT_RESPONSE_NONE (0x0 << MSC_CMDAT_RESPONSE_BIT) /* No response */
- #define MSC_CMDAT_RESPONSE_R1 (0x1 << MSC_CMDAT_RESPONSE_BIT) /* Format R1 and R1b */
- #define MSC_CMDAT_RESPONSE_R2 (0x2 << MSC_CMDAT_RESPONSE_BIT) /* Format R2 */
- #define MSC_CMDAT_RESPONSE_R3 (0x3 << MSC_CMDAT_RESPONSE_BIT) /* Format R3 */
- #define MSC_CMDAT_RESPONSE_R4 (0x4 << MSC_CMDAT_RESPONSE_BIT) /* Format R4 */
- #define MSC_CMDAT_RESPONSE_R5 (0x5 << MSC_CMDAT_RESPONSE_BIT) /* Format R5 */
- #define MSC_CMDAT_RESPONSE_R6 (0x6 << MSC_CMDAT_RESPONSE_BIT) /* Format R6 */
-
-#define CMDAT_DMA_EN (1 << 8)
-#define CMDAT_INIT (1 << 7)
-#define CMDAT_BUSY (1 << 6)
-#define CMDAT_STREAM (1 << 5)
-#define CMDAT_WRITE (1 << 4)
-#define CMDAT_DATA_EN (1 << 3)
-
-/* MSC Interrupts Mask Register (MSC_IMASK) */
-
-#define MSC_IMASK_SDIO (1 << 7)
-#define MSC_IMASK_TXFIFO_WR_REQ (1 << 6)
-#define MSC_IMASK_RXFIFO_RD_REQ (1 << 5)
-#define MSC_IMASK_END_CMD_RES (1 << 2)
-#define MSC_IMASK_PRG_DONE (1 << 1)
-#define MSC_IMASK_DATA_TRAN_DONE (1 << 0)
-
-
-/* MSC Interrupts Status Register (MSC_IREG) */
-
-#define MSC_IREG_SDIO (1 << 7)
-#define MSC_IREG_TXFIFO_WR_REQ (1 << 6)
-#define MSC_IREG_RXFIFO_RD_REQ (1 << 5)
-#define MSC_IREG_END_CMD_RES (1 << 2)
-#define MSC_IREG_PRG_DONE (1 << 1)
-#define MSC_IREG_DATA_TRAN_DONE (1 << 0)
-
-
-/*************************************************************************
- * EMC (External Memory Controller)
- *************************************************************************/
-#define EMC_BCR (EMC_BASE + 0x0) /* BCR */
-
-#define EMC_SMCR0 (EMC_BASE + 0x10) /* Static Memory Control Register 0 */
-#define EMC_SMCR1 (EMC_BASE + 0x14) /* Static Memory Control Register 1 */
-#define EMC_SMCR2 (EMC_BASE + 0x18) /* Static Memory Control Register 2 */
-#define EMC_SMCR3 (EMC_BASE + 0x1c) /* Static Memory Control Register 3 */
-#define EMC_SMCR4 (EMC_BASE + 0x20) /* Static Memory Control Register 4 */
-#define EMC_SACR0 (EMC_BASE + 0x30) /* Static Memory Bank 0 Addr Config Reg */
-#define EMC_SACR1 (EMC_BASE + 0x34) /* Static Memory Bank 1 Addr Config Reg */
-#define EMC_SACR2 (EMC_BASE + 0x38) /* Static Memory Bank 2 Addr Config Reg */
-#define EMC_SACR3 (EMC_BASE + 0x3c) /* Static Memory Bank 3 Addr Config Reg */
-#define EMC_SACR4 (EMC_BASE + 0x40) /* Static Memory Bank 4 Addr Config Reg */
-
-#define EMC_NFCSR (EMC_BASE + 0x050) /* NAND Flash Control/Status Register */
-#define EMC_NFECR (EMC_BASE + 0x100) /* NAND Flash ECC Control Register */
-#define EMC_NFECC (EMC_BASE + 0x104) /* NAND Flash ECC Data Register */
-#define EMC_NFPAR0 (EMC_BASE + 0x108) /* NAND Flash RS Parity 0 Register */
-#define EMC_NFPAR1 (EMC_BASE + 0x10c) /* NAND Flash RS Parity 1 Register */
-#define EMC_NFPAR2 (EMC_BASE + 0x110) /* NAND Flash RS Parity 2 Register */
-#define EMC_NFINTS (EMC_BASE + 0x114) /* NAND Flash Interrupt Status Register */
-#define EMC_NFINTE (EMC_BASE + 0x118) /* NAND Flash Interrupt Enable Register */
-#define EMC_NFERR0 (EMC_BASE + 0x11c) /* NAND Flash RS Error Report 0 Register */
-#define EMC_NFERR1 (EMC_BASE + 0x120) /* NAND Flash RS Error Report 1 Register */
-#define EMC_NFERR2 (EMC_BASE + 0x124) /* NAND Flash RS Error Report 2 Register */
-#define EMC_NFERR3 (EMC_BASE + 0x128) /* NAND Flash RS Error Report 3 Register */
-
-#define EMC_DMCR (EMC_BASE + 0x80) /* DRAM Control Register */
-#define EMC_RTCSR (EMC_BASE + 0x84) /* Refresh Time Control/Status Register */
-#define EMC_RTCNT (EMC_BASE + 0x88) /* Refresh Timer Counter */
-#define EMC_RTCOR (EMC_BASE + 0x8c) /* Refresh Time Constant Register */
-#define EMC_DMAR0 (EMC_BASE + 0x90) /* SDRAM Bank 0 Addr Config Register */
-#define EMC_SDMR0 (EMC_BASE + 0xa000) /* Mode Register of SDRAM bank 0 */
-
-#define REG_EMC_BCR REG32(EMC_BCR)
-
-#define REG_EMC_SMCR0 REG32(EMC_SMCR0)
-#define REG_EMC_SMCR1 REG32(EMC_SMCR1)
-#define REG_EMC_SMCR2 REG32(EMC_SMCR2)
-#define REG_EMC_SMCR3 REG32(EMC_SMCR3)
-#define REG_EMC_SMCR4 REG32(EMC_SMCR4)
-#define REG_EMC_SACR0 REG32(EMC_SACR0)
-#define REG_EMC_SACR1 REG32(EMC_SACR1)
-#define REG_EMC_SACR2 REG32(EMC_SACR2)
-#define REG_EMC_SACR3 REG32(EMC_SACR3)
-#define REG_EMC_SACR4 REG32(EMC_SACR4)
-
-#define REG_EMC_NFCSR REG32(EMC_NFCSR)
-#define REG_EMC_NFECR REG32(EMC_NFECR)
-#define REG_EMC_NFECC REG32(EMC_NFECC)
-#define REG_EMC_NFPAR0 REG32(EMC_NFPAR0)
-#define REG_EMC_NFPAR1 REG32(EMC_NFPAR1)
-#define REG_EMC_NFPAR2 REG32(EMC_NFPAR2)
-#define REG_EMC_NFINTS REG32(EMC_NFINTS)
-#define REG_EMC_NFINTE REG32(EMC_NFINTE)
-#define REG_EMC_NFERR0 REG32(EMC_NFERR0)
-#define REG_EMC_NFERR1 REG32(EMC_NFERR1)
-#define REG_EMC_NFERR2 REG32(EMC_NFERR2)
-#define REG_EMC_NFERR3 REG32(EMC_NFERR3)
-
-#define REG_EMC_DMCR REG32(EMC_DMCR)
-#define REG_EMC_RTCSR REG16(EMC_RTCSR)
-#define REG_EMC_RTCNT REG16(EMC_RTCNT)
-#define REG_EMC_RTCOR REG16(EMC_RTCOR)
-#define REG_EMC_DMAR0 REG32(EMC_DMAR0)
-
-/* Static Memory Control Register */
-#define EMC_SMCR_STRV_BIT 24
-#define EMC_SMCR_STRV_MASK (0x0f << EMC_SMCR_STRV_BIT)
-#define EMC_SMCR_TAW_BIT 20
-#define EMC_SMCR_TAW_MASK (0x0f << EMC_SMCR_TAW_BIT)
-#define EMC_SMCR_TBP_BIT 16
-#define EMC_SMCR_TBP_MASK (0x0f << EMC_SMCR_TBP_BIT)
-#define EMC_SMCR_TAH_BIT 12
-#define EMC_SMCR_TAH_MASK (0x07 << EMC_SMCR_TAH_BIT)
-#define EMC_SMCR_TAS_BIT 8
-#define EMC_SMCR_TAS_MASK (0x07 << EMC_SMCR_TAS_BIT)
-#define EMC_SMCR_BW_BIT 6
-#define EMC_SMCR_BW_MASK (0x03 << EMC_SMCR_BW_BIT)
- #define EMC_SMCR_BW_8BIT (0 << EMC_SMCR_BW_BIT)
- #define EMC_SMCR_BW_16BIT (1 << EMC_SMCR_BW_BIT)
- #define EMC_SMCR_BW_32BIT (2 << EMC_SMCR_BW_BIT)
-#define EMC_SMCR_BCM (1 << 3)
-#define EMC_SMCR_BL_BIT 1
-#define EMC_SMCR_BL_MASK (0x03 << EMC_SMCR_BL_BIT)
- #define EMC_SMCR_BL_4 (0 << EMC_SMCR_BL_BIT)
- #define EMC_SMCR_BL_8 (1 << EMC_SMCR_BL_BIT)
- #define EMC_SMCR_BL_16 (2 << EMC_SMCR_BL_BIT)
- #define EMC_SMCR_BL_32 (3 << EMC_SMCR_BL_BIT)
-#define EMC_SMCR_SMT (1 << 0)
-
-/* Static Memory Bank Addr Config Reg */
-#define EMC_SACR_BASE_BIT 8
-#define EMC_SACR_BASE_MASK (0xff << EMC_SACR_BASE_BIT)
-#define EMC_SACR_MASK_BIT 0
-#define EMC_SACR_MASK_MASK (0xff << EMC_SACR_MASK_BIT)
-
-/* NAND Flash Control/Status Register */
-#define EMC_NFCSR_NFCE4 (1 << 7) /* NAND Flash Enable */
-#define EMC_NFCSR_NFE4 (1 << 6) /* NAND Flash FCE# Assertion Enable */
-#define EMC_NFCSR_NFCE3 (1 << 5)
-#define EMC_NFCSR_NFE3 (1 << 4)
-#define EMC_NFCSR_NFCE2 (1 << 3)
-#define EMC_NFCSR_NFE2 (1 << 2)
-#define EMC_NFCSR_NFCE1 (1 << 1)
-#define EMC_NFCSR_NFE1 (1 << 0)
-
-/* NAND Flash ECC Control Register */
-#define EMC_NFECR_PRDY (1 << 4) /* Parity Ready */
-#define EMC_NFECR_RS_DECODING (0 << 3) /* RS is in decoding phase */
-#define EMC_NFECR_RS_ENCODING (1 << 3) /* RS is in encoding phase */
-#define EMC_NFECR_HAMMING (0 << 2) /* Select HAMMING Correction Algorithm */
-#define EMC_NFECR_RS (1 << 2) /* Select RS Correction Algorithm */
-#define EMC_NFECR_ERST (1 << 1) /* ECC Reset */
-#define EMC_NFECR_ECCE (1 << 0) /* ECC Enable */
-
-/* NAND Flash ECC Data Register */
-#define EMC_NFECC_ECC2_BIT 16
-#define EMC_NFECC_ECC2_MASK (0xff << EMC_NFECC_ECC2_BIT)
-#define EMC_NFECC_ECC1_BIT 8
-#define EMC_NFECC_ECC1_MASK (0xff << EMC_NFECC_ECC1_BIT)
-#define EMC_NFECC_ECC0_BIT 0
-#define EMC_NFECC_ECC0_MASK (0xff << EMC_NFECC_ECC0_BIT)
-
-/* NAND Flash Interrupt Status Register */
-#define EMC_NFINTS_ERRCNT_BIT 29 /* Error Count */
-#define EMC_NFINTS_ERRCNT_MASK (0x7 << EMC_NFINTS_ERRCNT_BIT)
-#define EMC_NFINTS_PADF (1 << 4) /* Padding Finished */
-#define EMC_NFINTS_DECF (1 << 3) /* Decoding Finished */
-#define EMC_NFINTS_ENCF (1 << 2) /* Encoding Finished */
-#define EMC_NFINTS_UNCOR (1 << 1) /* Uncorrectable Error Occurred */
-#define EMC_NFINTS_ERR (1 << 0) /* Error Occurred */
-
-/* NAND Flash Interrupt Enable Register */
-#define EMC_NFINTE_PADFE (1 << 4) /* Padding Finished Interrupt Enable */
-#define EMC_NFINTE_DECFE (1 << 3) /* Decoding Finished Interrupt Enable */
-#define EMC_NFINTE_ENCFE (1 << 2) /* Encoding Finished Interrupt Enable */
-#define EMC_NFINTE_UNCORE (1 << 1) /* Uncorrectable Error Occurred Intr Enable */
-#define EMC_NFINTE_ERRE (1 << 0) /* Error Occurred Interrupt */
-
-/* NAND Flash RS Error Report Register */
-#define EMC_NFERR_INDEX_BIT 16 /* Error Symbol Index */
-#define EMC_NFERR_INDEX_MASK (0x1ff << EMC_NFERR_INDEX_BIT)
-#define EMC_NFERR_MASK_BIT 0 /* Error Symbol Value */
-#define EMC_NFERR_MASK_MASK (0x1ff << EMC_NFERR_MASK_BIT)
-
-
-/* DRAM Control Register */
-#define EMC_DMCR_BW_BIT 31
-#define EMC_DMCR_BW (1 << EMC_DMCR_BW_BIT)
-#define EMC_DMCR_CA_BIT 26
-#define EMC_DMCR_CA_MASK (0x07 << EMC_DMCR_CA_BIT)
- #define EMC_DMCR_CA_8 (0 << EMC_DMCR_CA_BIT)
- #define EMC_DMCR_CA_9 (1 << EMC_DMCR_CA_BIT)
- #define EMC_DMCR_CA_10 (2 << EMC_DMCR_CA_BIT)
- #define EMC_DMCR_CA_11 (3 << EMC_DMCR_CA_BIT)
- #define EMC_DMCR_CA_12 (4 << EMC_DMCR_CA_BIT)
-#define EMC_DMCR_RMODE (1 << 25)
-#define EMC_DMCR_RFSH (1 << 24)
-#define EMC_DMCR_MRSET (1 << 23)
-#define EMC_DMCR_RA_BIT 20
-#define EMC_DMCR_RA_MASK (0x03 << EMC_DMCR_RA_BIT)
- #define EMC_DMCR_RA_11 (0 << EMC_DMCR_RA_BIT)
- #define EMC_DMCR_RA_12 (1 << EMC_DMCR_RA_BIT)
- #define EMC_DMCR_RA_13 (2 << EMC_DMCR_RA_BIT)
-#define EMC_DMCR_BA_BIT 19
-#define EMC_DMCR_BA (1 << EMC_DMCR_BA_BIT)
-#define EMC_DMCR_PDM (1 << 18)
-#define EMC_DMCR_EPIN (1 << 17)
-#define EMC_DMCR_TRAS_BIT 13
-#define EMC_DMCR_TRAS_MASK (0x07 << EMC_DMCR_TRAS_BIT)
-#define EMC_DMCR_RCD_BIT 11
-#define EMC_DMCR_RCD_MASK (0x03 << EMC_DMCR_RCD_BIT)
-#define EMC_DMCR_TPC_BIT 8
-#define EMC_DMCR_TPC_MASK (0x07 << EMC_DMCR_TPC_BIT)
-#define EMC_DMCR_TRWL_BIT 5
-#define EMC_DMCR_TRWL_MASK (0x03 << EMC_DMCR_TRWL_BIT)
-#define EMC_DMCR_TRC_BIT 2
-#define EMC_DMCR_TRC_MASK (0x07 << EMC_DMCR_TRC_BIT)
-#define EMC_DMCR_TCL_BIT 0
-#define EMC_DMCR_TCL_MASK (0x03 << EMC_DMCR_TCL_BIT)
-
-/* Refresh Time Control/Status Register */
-#define EMC_RTCSR_CMF (1 << 7)
-#define EMC_RTCSR_CKS_BIT 0
-#define EMC_RTCSR_CKS_MASK (0x07 << EMC_RTCSR_CKS_BIT)
- #define EMC_RTCSR_CKS_DISABLE (0 << EMC_RTCSR_CKS_BIT)
- #define EMC_RTCSR_CKS_4 (1 << EMC_RTCSR_CKS_BIT)
- #define EMC_RTCSR_CKS_16 (2 << EMC_RTCSR_CKS_BIT)
- #define EMC_RTCSR_CKS_64 (3 << EMC_RTCSR_CKS_BIT)
- #define EMC_RTCSR_CKS_256 (4 << EMC_RTCSR_CKS_BIT)
- #define EMC_RTCSR_CKS_1024 (5 << EMC_RTCSR_CKS_BIT)
- #define EMC_RTCSR_CKS_2048 (6 << EMC_RTCSR_CKS_BIT)
- #define EMC_RTCSR_CKS_4096 (7 << EMC_RTCSR_CKS_BIT)
-
-/* SDRAM Bank Address Configuration Register */
-#define EMC_DMAR_BASE_BIT 8
-#define EMC_DMAR_BASE_MASK (0xff << EMC_DMAR_BASE_BIT)
-#define EMC_DMAR_MASK_BIT 0
-#define EMC_DMAR_MASK_MASK (0xff << EMC_DMAR_MASK_BIT)
-
-/* Mode Register of SDRAM bank 0 */
-#define EMC_SDMR_BM (1 << 9) /* Write Burst Mode */
-#define EMC_SDMR_OM_BIT 7 /* Operating Mode */
-#define EMC_SDMR_OM_MASK (3 << EMC_SDMR_OM_BIT)
- #define EMC_SDMR_OM_NORMAL (0 << EMC_SDMR_OM_BIT)
-#define EMC_SDMR_CAS_BIT 4 /* CAS Latency */
-#define EMC_SDMR_CAS_MASK (7 << EMC_SDMR_CAS_BIT)
- #define EMC_SDMR_CAS_1 (1 << EMC_SDMR_CAS_BIT)
- #define EMC_SDMR_CAS_2 (2 << EMC_SDMR_CAS_BIT)
- #define EMC_SDMR_CAS_3 (3 << EMC_SDMR_CAS_BIT)
-#define EMC_SDMR_BT_BIT 3 /* Burst Type */
-#define EMC_SDMR_BT_MASK (1 << EMC_SDMR_BT_BIT)
- #define EMC_SDMR_BT_SEQ (0 << EMC_SDMR_BT_BIT) /* Sequential */
- #define EMC_SDMR_BT_INT (1 << EMC_SDMR_BT_BIT) /* Interleave */
-#define EMC_SDMR_BL_BIT 0 /* Burst Length */
-#define EMC_SDMR_BL_MASK (7 << EMC_SDMR_BL_BIT)
- #define EMC_SDMR_BL_1 (0 << EMC_SDMR_BL_BIT)
- #define EMC_SDMR_BL_2 (1 << EMC_SDMR_BL_BIT)
- #define EMC_SDMR_BL_4 (2 << EMC_SDMR_BL_BIT)
- #define EMC_SDMR_BL_8 (3 << EMC_SDMR_BL_BIT)
-
-#define EMC_SDMR_CAS2_16BIT \
- (EMC_SDMR_CAS_2 | EMC_SDMR_BT_SEQ | EMC_SDMR_BL_2)
-#define EMC_SDMR_CAS2_32BIT \
- (EMC_SDMR_CAS_2 | EMC_SDMR_BT_SEQ | EMC_SDMR_BL_4)
-#define EMC_SDMR_CAS3_16BIT \
- (EMC_SDMR_CAS_3 | EMC_SDMR_BT_SEQ | EMC_SDMR_BL_2)
-#define EMC_SDMR_CAS3_32BIT \
- (EMC_SDMR_CAS_3 | EMC_SDMR_BT_SEQ | EMC_SDMR_BL_4)
-
-/*************************************************************************
- * CIM
- *************************************************************************/
-#define CIM_CFG (CIM_BASE + 0x0000)
-#define CIM_CTRL (CIM_BASE + 0x0004)
-#define CIM_STATE (CIM_BASE + 0x0008)
-#define CIM_IID (CIM_BASE + 0x000C)
-#define CIM_RXFIFO (CIM_BASE + 0x0010)
-#define CIM_DA (CIM_BASE + 0x0020)
-#define CIM_FA (CIM_BASE + 0x0024)
-#define CIM_FID (CIM_BASE + 0x0028)
-#define CIM_CMD (CIM_BASE + 0x002C)
-
-#define REG_CIM_CFG REG32(CIM_CFG)
-#define REG_CIM_CTRL REG32(CIM_CTRL)
-#define REG_CIM_STATE REG32(CIM_STATE)
-#define REG_CIM_IID REG32(CIM_IID)
-#define REG_CIM_RXFIFO REG32(CIM_RXFIFO)
-#define REG_CIM_DA REG32(CIM_DA)
-#define REG_CIM_FA REG32(CIM_FA)
-#define REG_CIM_FID REG32(CIM_FID)
-#define REG_CIM_CMD REG32(CIM_CMD)
-
-/* CIM Configuration Register (CIM_CFG) */
-
-#define CIM_CFG_INV_DAT (1 << 15)
-#define CIM_CFG_VSP (1 << 14)
-#define CIM_CFG_HSP (1 << 13)
-#define CIM_CFG_PCP (1 << 12)
-#define CIM_CFG_DUMMY_ZERO (1 << 9)
-#define CIM_CFG_EXT_VSYNC (1 << 8)
-#define CIM_CFG_PACK_BIT 4
-#define CIM_CFG_PACK_MASK (0x7 << CIM_CFG_PACK_BIT)
- #define CIM_CFG_PACK_0 (0 << CIM_CFG_PACK_BIT)
- #define CIM_CFG_PACK_1 (1 << CIM_CFG_PACK_BIT)
- #define CIM_CFG_PACK_2 (2 << CIM_CFG_PACK_BIT)
- #define CIM_CFG_PACK_3 (3 << CIM_CFG_PACK_BIT)
- #define CIM_CFG_PACK_4 (4 << CIM_CFG_PACK_BIT)
- #define CIM_CFG_PACK_5 (5 << CIM_CFG_PACK_BIT)
- #define CIM_CFG_PACK_6 (6 << CIM_CFG_PACK_BIT)
- #define CIM_CFG_PACK_7 (7 << CIM_CFG_PACK_BIT)
-#define CIM_CFG_DSM_BIT 0
-#define CIM_CFG_DSM_MASK (0x3 << CIM_CFG_DSM_BIT)
- #define CIM_CFG_DSM_CPM (0 << CIM_CFG_DSM_BIT) /* CCIR656 Progressive Mode */
- #define CIM_CFG_DSM_CIM (1 << CIM_CFG_DSM_BIT) /* CCIR656 Interlace Mode */
- #define CIM_CFG_DSM_GCM (2 << CIM_CFG_DSM_BIT) /* Gated Clock Mode */
- #define CIM_CFG_DSM_NGCM (3 << CIM_CFG_DSM_BIT) /* Non-Gated Clock Mode */
-
-/* CIM Control Register (CIM_CTRL) */
-
-#define CIM_CTRL_MCLKDIV_BIT 24
-#define CIM_CTRL_MCLKDIV_MASK (0xff << CIM_CTRL_MCLKDIV_BIT)
-#define CIM_CTRL_FRC_BIT 16
-#define CIM_CTRL_FRC_MASK (0xf << CIM_CTRL_FRC_BIT)
- #define CIM_CTRL_FRC_1 (0x0 << CIM_CTRL_FRC_BIT) /* Sample every frame */
- #define CIM_CTRL_FRC_2 (0x1 << CIM_CTRL_FRC_BIT) /* Sample 1/2 frame */
- #define CIM_CTRL_FRC_3 (0x2 << CIM_CTRL_FRC_BIT) /* Sample 1/3 frame */
- #define CIM_CTRL_FRC_4 (0x3 << CIM_CTRL_FRC_BIT) /* Sample 1/4 frame */
- #define CIM_CTRL_FRC_5 (0x4 << CIM_CTRL_FRC_BIT) /* Sample 1/5 frame */
- #define CIM_CTRL_FRC_6 (0x5 << CIM_CTRL_FRC_BIT) /* Sample 1/6 frame */
- #define CIM_CTRL_FRC_7 (0x6 << CIM_CTRL_FRC_BIT) /* Sample 1/7 frame */
- #define CIM_CTRL_FRC_8 (0x7 << CIM_CTRL_FRC_BIT) /* Sample 1/8 frame */
- #define CIM_CTRL_FRC_9 (0x8 << CIM_CTRL_FRC_BIT) /* Sample 1/9 frame */
- #define CIM_CTRL_FRC_10 (0x9 << CIM_CTRL_FRC_BIT) /* Sample 1/10 frame */
- #define CIM_CTRL_FRC_11 (0xA << CIM_CTRL_FRC_BIT) /* Sample 1/11 frame */
- #define CIM_CTRL_FRC_12 (0xB << CIM_CTRL_FRC_BIT) /* Sample 1/12 frame */
- #define CIM_CTRL_FRC_13 (0xC << CIM_CTRL_FRC_BIT) /* Sample 1/13 frame */
- #define CIM_CTRL_FRC_14 (0xD << CIM_CTRL_FRC_BIT) /* Sample 1/14 frame */
- #define CIM_CTRL_FRC_15 (0xE << CIM_CTRL_FRC_BIT) /* Sample 1/15 frame */
- #define CIM_CTRL_FRC_16 (0xF << CIM_CTRL_FRC_BIT) /* Sample 1/16 frame */
-#define CIM_CTRL_VDDM (1 << 13)
-#define CIM_CTRL_DMA_SOFM (1 << 12)
-#define CIM_CTRL_DMA_EOFM (1 << 11)
-#define CIM_CTRL_DMA_STOPM (1 << 10)
-#define CIM_CTRL_RXF_TRIGM (1 << 9)
-#define CIM_CTRL_RXF_OFM (1 << 8)
-#define CIM_CTRL_RXF_TRIG_BIT 4
-#define CIM_CTRL_RXF_TRIG_MASK (0x7 << CIM_CTRL_RXF_TRIG_BIT)
- #define CIM_CTRL_RXF_TRIG_4 (0 << CIM_CTRL_RXF_TRIG_BIT) /* RXFIFO Trigger Value is 4 */
- #define CIM_CTRL_RXF_TRIG_8 (1 << CIM_CTRL_RXF_TRIG_BIT) /* RXFIFO Trigger Value is 8 */
- #define CIM_CTRL_RXF_TRIG_12 (2 << CIM_CTRL_RXF_TRIG_BIT) /* RXFIFO Trigger Value is 12 */
- #define CIM_CTRL_RXF_TRIG_16 (3 << CIM_CTRL_RXF_TRIG_BIT) /* RXFIFO Trigger Value is 16 */
- #define CIM_CTRL_RXF_TRIG_20 (4 << CIM_CTRL_RXF_TRIG_BIT) /* RXFIFO Trigger Value is 20 */
- #define CIM_CTRL_RXF_TRIG_24 (5 << CIM_CTRL_RXF_TRIG_BIT) /* RXFIFO Trigger Value is 24 */
- #define CIM_CTRL_RXF_TRIG_28 (6 << CIM_CTRL_RXF_TRIG_BIT) /* RXFIFO Trigger Value is 28 */
- #define CIM_CTRL_RXF_TRIG_32 (7 << CIM_CTRL_RXF_TRIG_BIT) /* RXFIFO Trigger Value is 32 */
-#define CIM_CTRL_DMA_EN (1 << 2)
-#define CIM_CTRL_RXF_RST (1 << 1)
-#define CIM_CTRL_ENA (1 << 0)
-
-/* CIM State Register (CIM_STATE) */
-
-#define CIM_STATE_DMA_SOF (1 << 6)
-#define CIM_STATE_DMA_EOF (1 << 5)
-#define CIM_STATE_DMA_STOP (1 << 4)
-#define CIM_STATE_RXF_OF (1 << 3)
-#define CIM_STATE_RXF_TRIG (1 << 2)
-#define CIM_STATE_RXF_EMPTY (1 << 1)
-#define CIM_STATE_VDD (1 << 0)
-
-/* CIM DMA Command Register (CIM_CMD) */
-
-#define CIM_CMD_SOFINT (1 << 31)
-#define CIM_CMD_EOFINT (1 << 30)
-#define CIM_CMD_STOP (1 << 28)
-#define CIM_CMD_LEN_BIT 0
-#define CIM_CMD_LEN_MASK (0xffffff << CIM_CMD_LEN_BIT)
-
-
-/*************************************************************************
- * SADC (Smart A/D Controller)
- *************************************************************************/
-
-#define SADC_ENA (SADC_BASE + 0x00) /* ADC Enable Register */
-#define SADC_CFG (SADC_BASE + 0x04) /* ADC Configure Register */
-#define SADC_CTRL (SADC_BASE + 0x08) /* ADC Control Register */
-#define SADC_STATE (SADC_BASE + 0x0C) /* ADC Status Register*/
-#define SADC_SAMETIME (SADC_BASE + 0x10) /* ADC Same Point Time Register */
-#define SADC_WAITTIME (SADC_BASE + 0x14) /* ADC Wait Time Register */
-#define SADC_TSDAT (SADC_BASE + 0x18) /* ADC Touch Screen Data Register */
-#define SADC_BATDAT (SADC_BASE + 0x1C) /* ADC PBAT Data Register */
-#define SADC_SADDAT (SADC_BASE + 0x20) /* ADC SADCIN Data Register */
-
-#define REG_SADC_ENA REG8(SADC_ENA)
-#define REG_SADC_CFG REG32(SADC_CFG)
-#define REG_SADC_CTRL REG8(SADC_CTRL)
-#define REG_SADC_STATE REG8(SADC_STATE)
-#define REG_SADC_SAMETIME REG16(SADC_SAMETIME)
-#define REG_SADC_WAITTIME REG16(SADC_WAITTIME)
-#define REG_SADC_TSDAT REG32(SADC_TSDAT)
-#define REG_SADC_BATDAT REG16(SADC_BATDAT)
-#define REG_SADC_SADDAT REG16(SADC_SADDAT)
-
-/* ADC Enable Register */
-#define SADC_ENA_ADEN (1 << 7) /* Touch Screen Enable */
-#define SADC_ENA_TSEN (1 << 2) /* Touch Screen Enable */
-#define SADC_ENA_PBATEN (1 << 1) /* PBAT Enable */
-#define SADC_ENA_SADCINEN (1 << 0) /* SADCIN Enable */
-
-/* ADC Configure Register */
-#define SADC_CFG_CLKOUT_NUM_BIT 16
-#define SADC_CFG_CLKOUT_NUM_MASK (0x7 << SADC_CFG_CLKOUT_NUM_BIT)
-#define SADC_CFG_TS_DMA (1 << 15) /* Touch Screen DMA Enable */
-#define SADC_CFG_XYZ_BIT 13 /* XYZ selection */
-#define SADC_CFG_XYZ_MASK (0x3 << SADC_CFG_XYZ_BIT)
- #define SADC_CFG_XY (0 << SADC_CFG_XYZ_BIT)
- #define SADC_CFG_XYZ (1 << SADC_CFG_XYZ_BIT)
- #define SADC_CFG_XYZ1Z2 (2 << SADC_CFG_XYZ_BIT)
-#define SADC_CFG_SNUM_BIT 10 /* Sample Number */
-#define SADC_CFG_SNUM_MASK (0x7 << SADC_CFG_SNUM_BIT)
- #define SADC_CFG_SNUM_1 (0x0 << SADC_CFG_SNUM_BIT)
- #define SADC_CFG_SNUM_2 (0x1 << SADC_CFG_SNUM_BIT)
- #define SADC_CFG_SNUM_3 (0x2 << SADC_CFG_SNUM_BIT)
- #define SADC_CFG_SNUM_4 (0x3 << SADC_CFG_SNUM_BIT)
- #define SADC_CFG_SNUM_5 (0x4 << SADC_CFG_SNUM_BIT)
- #define SADC_CFG_SNUM_6 (0x5 << SADC_CFG_SNUM_BIT)
- #define SADC_CFG_SNUM_8 (0x6 << SADC_CFG_SNUM_BIT)
- #define SADC_CFG_SNUM_9 (0x7 << SADC_CFG_SNUM_BIT)
-#define SADC_CFG_CLKDIV_BIT 5 /* AD Converter frequency clock divider */
-#define SADC_CFG_CLKDIV_MASK (0x1f << SADC_CFG_CLKDIV_BIT)
-#define SADC_CFG_PBAT_HIGH (0 << 4) /* PBAT >= 2.5V */
-#define SADC_CFG_PBAT_LOW (1 << 4) /* PBAT < 2.5V */
-#define SADC_CFG_CMD_BIT 0 /* ADC Command */
-#define SADC_CFG_CMD_MASK (0xf << SADC_CFG_CMD_BIT)
- #define SADC_CFG_CMD_X_SE (0x0 << SADC_CFG_CMD_BIT) /* X Single-End */
- #define SADC_CFG_CMD_Y_SE (0x1 << SADC_CFG_CMD_BIT) /* Y Single-End */
- #define SADC_CFG_CMD_X_DIFF (0x2 << SADC_CFG_CMD_BIT) /* X Differential */
- #define SADC_CFG_CMD_Y_DIFF (0x3 << SADC_CFG_CMD_BIT) /* Y Differential */
- #define SADC_CFG_CMD_Z1_DIFF (0x4 << SADC_CFG_CMD_BIT) /* Z1 Differential */
- #define SADC_CFG_CMD_Z2_DIFF (0x5 << SADC_CFG_CMD_BIT) /* Z2 Differential */
- #define SADC_CFG_CMD_Z3_DIFF (0x6 << SADC_CFG_CMD_BIT) /* Z3 Differential */
- #define SADC_CFG_CMD_Z4_DIFF (0x7 << SADC_CFG_CMD_BIT) /* Z4 Differential */
- #define SADC_CFG_CMD_TP_SE (0x8 << SADC_CFG_CMD_BIT) /* Touch Pressure */
- #define SADC_CFG_CMD_PBATH_SE (0x9 << SADC_CFG_CMD_BIT) /* PBAT >= 2.5V */
- #define SADC_CFG_CMD_PBATL_SE (0xa << SADC_CFG_CMD_BIT) /* PBAT < 2.5V */
- #define SADC_CFG_CMD_SADCIN_SE (0xb << SADC_CFG_CMD_BIT) /* Measure SADCIN */
- #define SADC_CFG_CMD_INT_PEN (0xc << SADC_CFG_CMD_BIT) /* INT_PEN Enable */
-
-/* ADC Control Register */
-#define SADC_CTRL_PENDM (1 << 4) /* Pen Down Interrupt Mask */
-#define SADC_CTRL_PENUM (1 << 3) /* Pen Up Interrupt Mask */
-#define SADC_CTRL_TSRDYM (1 << 2) /* Touch Screen Data Ready Interrupt Mask */
-#define SADC_CTRL_PBATRDYM (1 << 1) /* PBAT Data Ready Interrupt Mask */
-#define SADC_CTRL_SRDYM (1 << 0) /* SADCIN Data Ready Interrupt Mask */
-
-/* ADC Status Register */
-#define SADC_STATE_TSBUSY (1 << 7) /* TS A/D is working */
-#define SADC_STATE_PBATBUSY (1 << 6) /* PBAT A/D is working */
-#define SADC_STATE_SBUSY (1 << 5) /* SADCIN A/D is working */
-#define SADC_STATE_PEND (1 << 4) /* Pen Down Interrupt Flag */
-#define SADC_STATE_PENU (1 << 3) /* Pen Up Interrupt Flag */
-#define SADC_STATE_TSRDY (1 << 2) /* Touch Screen Data Ready Interrupt Flag */
-#define SADC_STATE_PBATRDY (1 << 1) /* PBAT Data Ready Interrupt Flag */
-#define SADC_STATE_SRDY (1 << 0) /* SADCIN Data Ready Interrupt Flag */
-
-/* ADC Touch Screen Data Register */
-#define SADC_TSDAT_DATA0_BIT 0
-#define SADC_TSDAT_DATA0_MASK (0xfff << SADC_TSDAT_DATA0_BIT)
-#define SADC_TSDAT_TYPE0 (1 << 15)
-#define SADC_TSDAT_DATA1_BIT 16
-#define SADC_TSDAT_DATA1_MASK (0xfff << SADC_TSDAT_DATA1_BIT)
-#define SADC_TSDAT_TYPE1 (1 << 31)
-
-
-/*************************************************************************
- * SLCD (Smart LCD Controller)
- *************************************************************************/
-
-#define SLCD_CFG (SLCD_BASE + 0xA0) /* SLCD Configure Register */
-#define SLCD_CTRL (SLCD_BASE + 0xA4) /* SLCD Control Register */
-#define SLCD_STATE (SLCD_BASE + 0xA8) /* SLCD Status Register */
-#define SLCD_DATA (SLCD_BASE + 0xAC) /* SLCD Data Register */
-#define SLCD_FIFO (SLCD_BASE + 0xB0) /* SLCD FIFO Register */
-
-#define REG_SLCD_CFG REG32(SLCD_CFG)
-#define REG_SLCD_CTRL REG8(SLCD_CTRL)
-#define REG_SLCD_STATE REG8(SLCD_STATE)
-#define REG_SLCD_DATA REG32(SLCD_DATA)
-#define REG_SLCD_FIFO REG32(SLCD_FIFO)
-
-/* SLCD Configure Register */
-#define SLCD_CFG_BURST_BIT 14
-#define SLCD_CFG_BURST_MASK (0x3 << SLCD_CFG_BURST_BIT)
- #define SLCD_CFG_BURST_4_WORD (0 << SLCD_CFG_BURST_BIT)
- #define SLCD_CFG_BURST_8_WORD (1 << SLCD_CFG_BURST_BIT)
-#define SLCD_CFG_DWIDTH_BIT 10
-#define SLCD_CFG_DWIDTH_MASK (0x7 << SLCD_CFG_DWIDTH_BIT)
- #define SLCD_CFG_DWIDTH_18 (0 << SLCD_CFG_DWIDTH_BIT)
- #define SLCD_CFG_DWIDTH_16 (1 << SLCD_CFG_DWIDTH_BIT)
- #define SLCD_CFG_DWIDTH_8_x3 (2 << SLCD_CFG_DWIDTH_BIT)
- #define SLCD_CFG_DWIDTH_8_x2 (3 << SLCD_CFG_DWIDTH_BIT)
- #define SLCD_CFG_DWIDTH_8_x1 (4 << SLCD_CFG_DWIDTH_BIT)
- #define SLCD_CFG_DWIDTH_9_x2 (4 << SLCD_CFG_DWIDTH_BIT)
-#define SLCD_CFG_CWIDTH_16BIT (0 << 8)
-#define SLCD_CFG_CWIDTH_8BIT (1 << 8)
-#define SLCD_CFG_CWIDTH_18BIT (2 << 8)
-#define SLCD_CFG_CS_ACTIVE_LOW (0 << 4)
-#define SLCD_CFG_CS_ACTIVE_HIGH (1 << 4)
-#define SLCD_CFG_RS_CMD_LOW (0 << 3)
-#define SLCD_CFG_RS_CMD_HIGH (1 << 3)
-#define SLCD_CFG_CLK_ACTIVE_FALLING (0 << 1)
-#define SLCD_CFG_CLK_ACTIVE_RISING (1 << 1)
-#define SLCD_CFG_TYPE_PARALLEL (0 << 0)
-#define SLCD_CFG_TYPE_SERIAL (1 << 0)
-
-/* SLCD Control Register */
-#define SLCD_CTRL_DMA_EN (1 << 0)
-
-/* SLCD Status Register */
-#define SLCD_STATE_BUSY (1 << 0)
-
-/* SLCD Data Register */
-#define SLCD_DATA_RS_DATA (0 << 31)
-#define SLCD_DATA_RS_COMMAND (1 << 31)
-
-/* SLCD FIFO Register */
-#define SLCD_FIFO_RS_DATA (0 << 31)
-#define SLCD_FIFO_RS_COMMAND (1 << 31)
-
-
-/*************************************************************************
- * LCD (LCD Controller)
- *************************************************************************/
-#define LCD_CFG (LCD_BASE + 0x00) /* LCD Configure Register */
-#define LCD_VSYNC (LCD_BASE + 0x04) /* Vertical Synchronize Register */
-#define LCD_HSYNC (LCD_BASE + 0x08) /* Horizontal Synchronize Register */
-#define LCD_VAT (LCD_BASE + 0x0c) /* Virtual Area Setting Register */
-#define LCD_DAH (LCD_BASE + 0x10) /* Display Area Horizontal Start/End Point */
-#define LCD_DAV (LCD_BASE + 0x14) /* Display Area Vertical Start/End Point */
-#define LCD_PS (LCD_BASE + 0x18) /* PS Signal Setting */
-#define LCD_CLS (LCD_BASE + 0x1c) /* CLS Signal Setting */
-#define LCD_SPL (LCD_BASE + 0x20) /* SPL Signal Setting */
-#define LCD_REV (LCD_BASE + 0x24) /* REV Signal Setting */
-#define LCD_CTRL (LCD_BASE + 0x30) /* LCD Control Register */
-#define LCD_STATE (LCD_BASE + 0x34) /* LCD Status Register */
-#define LCD_IID (LCD_BASE + 0x38) /* Interrupt ID Register */
-#define LCD_DA0 (LCD_BASE + 0x40) /* Descriptor Address Register 0 */
-#define LCD_SA0 (LCD_BASE + 0x44) /* Source Address Register 0 */
-#define LCD_FID0 (LCD_BASE + 0x48) /* Frame ID Register 0 */
-#define LCD_CMD0 (LCD_BASE + 0x4c) /* DMA Command Register 0 */
-#define LCD_DA1 (LCD_BASE + 0x50) /* Descriptor Address Register 1 */
-#define LCD_SA1 (LCD_BASE + 0x54) /* Source Address Register 1 */
-#define LCD_FID1 (LCD_BASE + 0x58) /* Frame ID Register 1 */
-#define LCD_CMD1 (LCD_BASE + 0x5c) /* DMA Command Register 1 */
-
-#define REG_LCD_CFG REG32(LCD_CFG)
-#define REG_LCD_VSYNC REG32(LCD_VSYNC)
-#define REG_LCD_HSYNC REG32(LCD_HSYNC)
-#define REG_LCD_VAT REG32(LCD_VAT)
-#define REG_LCD_DAH REG32(LCD_DAH)
-#define REG_LCD_DAV REG32(LCD_DAV)
-#define REG_LCD_PS REG32(LCD_PS)
-#define REG_LCD_CLS REG32(LCD_CLS)
-#define REG_LCD_SPL REG32(LCD_SPL)
-#define REG_LCD_REV REG32(LCD_REV)
-#define REG_LCD_CTRL REG32(LCD_CTRL)
-#define REG_LCD_STATE REG32(LCD_STATE)
-#define REG_LCD_IID REG32(LCD_IID)
-#define REG_LCD_DA0 REG32(LCD_DA0)
-#define REG_LCD_SA0 REG32(LCD_SA0)
-#define REG_LCD_FID0 REG32(LCD_FID0)
-#define REG_LCD_CMD0 REG32(LCD_CMD0)
-#define REG_LCD_DA1 REG32(LCD_DA1)
-#define REG_LCD_SA1 REG32(LCD_SA1)
-#define REG_LCD_FID1 REG32(LCD_FID1)
-#define REG_LCD_CMD1 REG32(LCD_CMD1)
-
-/* LCD Configure Register */
-#define LCD_CFG_LCDPIN_BIT 31 /* LCD pins selection */
-#define LCD_CFG_LCDPIN_MASK (0x1 << LCD_CFG_LCDPIN_BIT)
- #define LCD_CFG_LCDPIN_LCD (0x0 << LCD_CFG_LCDPIN_BIT)
- #define LCD_CFG_LCDPIN_SLCD (0x1 << LCD_CFG_LCDPIN_BIT)
-#define LCD_CFG_PSM (1 << 23) /* PS signal mode */
-#define LCD_CFG_CLSM (1 << 22) /* CLS signal mode */
-#define LCD_CFG_SPLM (1 << 21) /* SPL signal mode */
-#define LCD_CFG_REVM (1 << 20) /* REV signal mode */
-#define LCD_CFG_HSYNM (1 << 19) /* HSYNC signal mode */
-#define LCD_CFG_PCLKM (1 << 18) /* PCLK signal mode */
-#define LCD_CFG_INVDAT (1 << 17) /* Inverse output data */
-#define LCD_CFG_SYNDIR_IN (1 << 16) /* VSYNC&HSYNC direction */
-#define LCD_CFG_PSP (1 << 15) /* PS pin reset state */
-#define LCD_CFG_CLSP (1 << 14) /* CLS pin reset state */
-#define LCD_CFG_SPLP (1 << 13) /* SPL pin reset state */
-#define LCD_CFG_REVP (1 << 12) /* REV pin reset state */
-#define LCD_CFG_HSP (1 << 11) /* HSYNC pority:0-active high,1-active low */
-#define LCD_CFG_PCP (1 << 10) /* PCLK pority:0-rising,1-falling */
-#define LCD_CFG_DEP (1 << 9) /* DE pority:0-active high,1-active low */
-#define LCD_CFG_VSP (1 << 8) /* VSYNC pority:0-rising,1-falling */
-#define LCD_CFG_PDW_BIT 4 /* STN pins utilization */
-#define LCD_CFG_PDW_MASK (0x3 << LCD_DEV_PDW_BIT)
-#define LCD_CFG_PDW_1 (0 << LCD_CFG_PDW_BIT) /* LCD_D[0] */
- #define LCD_CFG_PDW_2 (1 << LCD_CFG_PDW_BIT) /* LCD_D[0:1] */
- #define LCD_CFG_PDW_4 (2 << LCD_CFG_PDW_BIT) /* LCD_D[0:3]/LCD_D[8:11] */
- #define LCD_CFG_PDW_8 (3 << LCD_CFG_PDW_BIT) /* LCD_D[0:7]/LCD_D[8:15] */
-#define LCD_CFG_MODE_BIT 0 /* Display Device Mode Select */
-#define LCD_CFG_MODE_MASK (0x0f << LCD_CFG_MODE_BIT)
- #define LCD_CFG_MODE_GENERIC_TFT (0 << LCD_CFG_MODE_BIT) /* 16,18 bit TFT */
- #define LCD_CFG_MODE_SPECIAL_TFT_1 (1 << LCD_CFG_MODE_BIT)
- #define LCD_CFG_MODE_SPECIAL_TFT_2 (2 << LCD_CFG_MODE_BIT)
- #define LCD_CFG_MODE_SPECIAL_TFT_3 (3 << LCD_CFG_MODE_BIT)
- #define LCD_CFG_MODE_NONINTER_CCIR656 (4 << LCD_CFG_MODE_BIT)
- #define LCD_CFG_MODE_INTER_CCIR656 (5 << LCD_CFG_MODE_BIT)
- #define LCD_CFG_MODE_SINGLE_CSTN (8 << LCD_CFG_MODE_BIT)
- #define LCD_CFG_MODE_SINGLE_MSTN (9 << LCD_CFG_MODE_BIT)
- #define LCD_CFG_MODE_DUAL_CSTN (10 << LCD_CFG_MODE_BIT)
- #define LCD_CFG_MODE_DUAL_MSTN (11 << LCD_CFG_MODE_BIT)
- #define LCD_CFG_MODE_SERIAL_TFT (12 << LCD_CFG_MODE_BIT)
- #define LCD_CFG_MODE_GENERIC_18BIT_TFT (13 << LCD_CFG_MODE_BIT)
- /* JZ47XX defines */
- #define LCD_CFG_MODE_SHARP_HR (1 << LCD_CFG_MODE_BIT)
- #define LCD_CFG_MODE_CASIO_TFT (2 << LCD_CFG_MODE_BIT)
- #define LCD_CFG_MODE_SAMSUNG_ALPHA (3 << LCD_CFG_MODE_BIT)
-
-
-
-/* Vertical Synchronize Register */
-#define LCD_VSYNC_VPS_BIT 16 /* VSYNC pulse start in line clock, fixed to 0 */
-#define LCD_VSYNC_VPS_MASK (0xffff << LCD_VSYNC_VPS_BIT)
-#define LCD_VSYNC_VPE_BIT 0 /* VSYNC pulse end in line clock */
-#define LCD_VSYNC_VPE_MASK (0xffff << LCD_VSYNC_VPS_BIT)
-
-/* Horizontal Synchronize Register */
-#define LCD_HSYNC_HPS_BIT 16 /* HSYNC pulse start position in dot clock */
-#define LCD_HSYNC_HPS_MASK (0xffff << LCD_HSYNC_HPS_BIT)
-#define LCD_HSYNC_HPE_BIT 0 /* HSYNC pulse end position in dot clock */
-#define LCD_HSYNC_HPE_MASK (0xffff << LCD_HSYNC_HPE_BIT)
-
-/* Virtual Area Setting Register */
-#define LCD_VAT_HT_BIT 16 /* Horizontal Total size in dot clock */
-#define LCD_VAT_HT_MASK (0xffff << LCD_VAT_HT_BIT)
-#define LCD_VAT_VT_BIT 0 /* Vertical Total size in dot clock */
-#define LCD_VAT_VT_MASK (0xffff << LCD_VAT_VT_BIT)
-
-/* Display Area Horizontal Start/End Point Register */
-#define LCD_DAH_HDS_BIT 16 /* Horizontal display area start in dot clock */
-#define LCD_DAH_HDS_MASK (0xffff << LCD_DAH_HDS_BIT)
-#define LCD_DAH_HDE_BIT 0 /* Horizontal display area end in dot clock */
-#define LCD_DAH_HDE_MASK (0xffff << LCD_DAH_HDE_BIT)
-
-/* Display Area Vertical Start/End Point Register */
-#define LCD_DAV_VDS_BIT 16 /* Vertical display area start in line clock */
-#define LCD_DAV_VDS_MASK (0xffff << LCD_DAV_VDS_BIT)
-#define LCD_DAV_VDE_BIT 0 /* Vertical display area end in line clock */
-#define LCD_DAV_VDE_MASK (0xffff << LCD_DAV_VDE_BIT)
-
-/* PS Signal Setting */
-#define LCD_PS_PSS_BIT 16 /* PS signal start position in dot clock */
-#define LCD_PS_PSS_MASK (0xffff << LCD_PS_PSS_BIT)
-#define LCD_PS_PSE_BIT 0 /* PS signal end position in dot clock */
-#define LCD_PS_PSE_MASK (0xffff << LCD_PS_PSE_BIT)
-
-/* CLS Signal Setting */
-#define LCD_CLS_CLSS_BIT 16 /* CLS signal start position in dot clock */
-#define LCD_CLS_CLSS_MASK (0xffff << LCD_CLS_CLSS_BIT)
-#define LCD_CLS_CLSE_BIT 0 /* CLS signal end position in dot clock */
-#define LCD_CLS_CLSE_MASK (0xffff << LCD_CLS_CLSE_BIT)
-
-/* SPL Signal Setting */
-#define LCD_SPL_SPLS_BIT 16 /* SPL signal start position in dot clock */
-#define LCD_SPL_SPLS_MASK (0xffff << LCD_SPL_SPLS_BIT)
-#define LCD_SPL_SPLE_BIT 0 /* SPL signal end position in dot clock */
-#define LCD_SPL_SPLE_MASK (0xffff << LCD_SPL_SPLE_BIT)
-
-/* REV Signal Setting */
-#define LCD_REV_REVS_BIT 16 /* REV signal start position in dot clock */
-#define LCD_REV_REVS_MASK (0xffff << LCD_REV_REVS_BIT)
-
-/* LCD Control Register */
-#define LCD_CTRL_BST_BIT 28 /* Burst Length Selection */
-#define LCD_CTRL_BST_MASK (0x03 << LCD_CTRL_BST_BIT)
- #define LCD_CTRL_BST_4 (0 << LCD_CTRL_BST_BIT) /* 4-word */
- #define LCD_CTRL_BST_8 (1 << LCD_CTRL_BST_BIT) /* 8-word */
- #define LCD_CTRL_BST_16 (2 << LCD_CTRL_BST_BIT) /* 16-word */
-#define LCD_CTRL_RGB565 (0 << 27) /* RGB565 mode */
-#define LCD_CTRL_RGB555 (1 << 27) /* RGB555 mode */
-#define LCD_CTRL_OFUP (1 << 26) /* Output FIFO underrun protection enable */
-#define LCD_CTRL_FRC_BIT 24 /* STN FRC Algorithm Selection */
-#define LCD_CTRL_FRC_MASK (0x03 << LCD_CTRL_FRC_BIT)
- #define LCD_CTRL_FRC_16 (0 << LCD_CTRL_FRC_BIT) /* 16 grayscale */
- #define LCD_CTRL_FRC_4 (1 << LCD_CTRL_FRC_BIT) /* 4 grayscale */
- #define LCD_CTRL_FRC_2 (2 << LCD_CTRL_FRC_BIT) /* 2 grayscale */
-#define LCD_CTRL_PDD_BIT 16 /* Load Palette Delay Counter */
-#define LCD_CTRL_PDD_MASK (0xff << LCD_CTRL_PDD_BIT)
-#define LCD_CTRL_EOFM (1 << 13) /* EOF interrupt mask */
-#define LCD_CTRL_SOFM (1 << 12) /* SOF interrupt mask */
-#define LCD_CTRL_OFUM (1 << 11) /* Output FIFO underrun interrupt mask */
-#define LCD_CTRL_IFUM0 (1 << 10) /* Input FIFO 0 underrun interrupt mask */
-#define LCD_CTRL_IFUM1 (1 << 9) /* Input FIFO 1 underrun interrupt mask */
-#define LCD_CTRL_LDDM (1 << 8) /* LCD disable done interrupt mask */
-#define LCD_CTRL_QDM (1 << 7) /* LCD quick disable done interrupt mask */
-#define LCD_CTRL_BEDN (1 << 6) /* Endian selection */
-#define LCD_CTRL_PEDN (1 << 5) /* Endian in byte:0-msb first, 1-lsb first */
-#define LCD_CTRL_DIS (1 << 4) /* Disable indicate bit */
-#define LCD_CTRL_ENA (1 << 3) /* LCD enable bit */
-#define LCD_CTRL_BPP_BIT 0 /* Bits Per Pixel */
-#define LCD_CTRL_BPP_MASK (0x07 << LCD_CTRL_BPP_BIT)
- #define LCD_CTRL_BPP_1 (0 << LCD_CTRL_BPP_BIT) /* 1 bpp */
- #define LCD_CTRL_BPP_2 (1 << LCD_CTRL_BPP_BIT) /* 2 bpp */
- #define LCD_CTRL_BPP_4 (2 << LCD_CTRL_BPP_BIT) /* 4 bpp */
- #define LCD_CTRL_BPP_8 (3 << LCD_CTRL_BPP_BIT) /* 8 bpp */
- #define LCD_CTRL_BPP_16 (4 << LCD_CTRL_BPP_BIT) /* 15/16 bpp */
- #define LCD_CTRL_BPP_18_24 (5 << LCD_CTRL_BPP_BIT) /* 18/24/32 bpp */
-
-/* LCD Status Register */
-#define LCD_STATE_QD (1 << 7) /* Quick Disable Done */
-#define LCD_STATE_EOF (1 << 5) /* EOF Flag */
-#define LCD_STATE_SOF (1 << 4) /* SOF Flag */
-#define LCD_STATE_OFU (1 << 3) /* Output FIFO Underrun */
-#define LCD_STATE_IFU0 (1 << 2) /* Input FIFO 0 Underrun */
-#define LCD_STATE_IFU1 (1 << 1) /* Input FIFO 1 Underrun */
-#define LCD_STATE_LDD (1 << 0) /* LCD Disabled */
-
-/* DMA Command Register */
-#define LCD_CMD_SOFINT (1 << 31)
-#define LCD_CMD_EOFINT (1 << 30)
-#define LCD_CMD_PAL (1 << 28)
-#define LCD_CMD_LEN_BIT 0
-#define LCD_CMD_LEN_MASK (0xffffff << LCD_CMD_LEN_BIT)
-
-
-/*************************************************************************
- * USB Device
- *************************************************************************/
-#define USB_BASE UDC_BASE
-
-#define USB_REG_FADDR (USB_BASE + 0x00) /* Function Address 8-bit */
-#define USB_REG_POWER (USB_BASE + 0x01) /* Power Managemetn 8-bit */
-#define USB_REG_INTRIN (USB_BASE + 0x02) /* Interrupt IN 16-bit */
-#define USB_REG_INTROUT (USB_BASE + 0x04) /* Interrupt OUT 16-bit */
-#define USB_REG_INTRINE (USB_BASE + 0x06) /* Intr IN enable 16-bit */
-#define USB_REG_INTROUTE (USB_BASE + 0x08) /* Intr OUT enable 16-bit */
-#define USB_REG_INTRUSB (USB_BASE + 0x0a) /* Interrupt USB 8-bit */
-#define USB_REG_INTRUSBE (USB_BASE + 0x0b) /* Interrupt USB Enable 8-bit */
-#define USB_REG_FRAME (USB_BASE + 0x0c) /* Frame number 16-bit */
-#define USB_REG_INDEX (USB_BASE + 0x0e) /* Index register 8-bit */
-#define USB_REG_TESTMODE (USB_BASE + 0x0f) /* USB test mode 8-bit */
-
-#define USB_REG_CSR0 (USB_BASE + 0x12) /* EP0 CSR 8-bit */
-#define USB_REG_INMAXP (USB_BASE + 0x10) /* EP1-2 IN Max Pkt Size 16-bit */
-#define USB_REG_INCSR (USB_BASE + 0x12) /* EP1-2 IN CSR LSB 8/16bit */
-#define USB_REG_INCSRH (USB_BASE + 0x13) /* EP1-2 IN CSR MSB 8-bit */
-#define USB_REG_OUTMAXP (USB_BASE + 0x14) /* EP1 OUT Max Pkt Size 16-bit */
-#define USB_REG_OUTCSR (USB_BASE + 0x16) /* EP1 OUT CSR LSB 8/16bit */
-#define USB_REG_OUTCSRH (USB_BASE + 0x17) /* EP1 OUT CSR MSB 8-bit */
-#define USB_REG_OUTCOUNT (USB_BASE + 0x18) /* bytes in EP0/1 OUT FIFO 16-bit */
-
-#define USB_FIFO_EP0 (USB_BASE + 0x20)
-#define USB_FIFO_EP1 (USB_BASE + 0x24)
-#define USB_FIFO_EP2 (USB_BASE + 0x28)
-
-#define USB_REG_EPINFO (USB_BASE + 0x78) /* Endpoint information */
-#define USB_REG_RAMINFO (USB_BASE + 0x79) /* RAM information */
-
-#define USB_REG_INTR (USB_BASE + 0x200) /* DMA pending interrupts */
-#define USB_REG_CNTL1 (USB_BASE + 0x204) /* DMA channel 1 control */
-#define USB_REG_ADDR1 (USB_BASE + 0x208) /* DMA channel 1 AHB memory addr */
-#define USB_REG_COUNT1 (USB_BASE + 0x20c) /* DMA channel 1 byte count */
-#define USB_REG_CNTL2 (USB_BASE + 0x214) /* DMA channel 2 control */
-#define USB_REG_ADDR2 (USB_BASE + 0x218) /* DMA channel 2 AHB memory addr */
-#define USB_REG_COUNT2 (USB_BASE + 0x21c) /* DMA channel 2 byte count */
-
-
-/* Power register bit masks */
-#define USB_POWER_SUSPENDM 0x01
-#define USB_POWER_RESUME 0x04
-#define USB_POWER_HSMODE 0x10
-#define USB_POWER_HSENAB 0x20
-#define USB_POWER_SOFTCONN 0x40
-
-/* Interrupt register bit masks */
-#define USB_INTR_SUSPEND 0x01
-#define USB_INTR_RESUME 0x02
-#define USB_INTR_RESET 0x04
-
-#define USB_INTR_EP0 0x0001
-#define USB_INTR_INEP1 0x0002
-#define USB_INTR_INEP2 0x0004
-#define USB_INTR_OUTEP1 0x0002
-
-/* CSR0 bit masks */
-#define USB_CSR0_OUTPKTRDY 0x01
-#define USB_CSR0_INPKTRDY 0x02
-#define USB_CSR0_SENTSTALL 0x04
-#define USB_CSR0_DATAEND 0x08
-#define USB_CSR0_SETUPEND 0x10
-#define USB_CSR0_SENDSTALL 0x20
-#define USB_CSR0_SVDOUTPKTRDY 0x40
-#define USB_CSR0_SVDSETUPEND 0x80
-
-/* Endpoint CSR register bits */
-#define USB_INCSRH_AUTOSET 0x80
-#define USB_INCSRH_ISO 0x40
-#define USB_INCSRH_MODE 0x20
-#define USB_INCSRH_DMAREQENAB 0x10
-#define USB_INCSRH_DMAREQMODE 0x04
-#define USB_INCSR_CDT 0x40
-#define USB_INCSR_SENTSTALL 0x20
-#define USB_INCSR_SENDSTALL 0x10
-#define USB_INCSR_FF 0x08
-#define USB_INCSR_UNDERRUN 0x04
-#define USB_INCSR_FFNOTEMPT 0x02
-#define USB_INCSR_INPKTRDY 0x01
-#define USB_OUTCSRH_AUTOCLR 0x80
-#define USB_OUTCSRH_ISO 0x40
-#define USB_OUTCSRH_DMAREQENAB 0x20
-#define USB_OUTCSRH_DNYT 0x10
-#define USB_OUTCSRH_DMAREQMODE 0x08
-#define USB_OUTCSR_CDT 0x80
-#define USB_OUTCSR_SENTSTALL 0x40
-#define USB_OUTCSR_SENDSTALL 0x20
-#define USB_OUTCSR_FF 0x10
-#define USB_OUTCSR_DATAERR 0x08
-#define USB_OUTCSR_OVERRUN 0x04
-#define USB_OUTCSR_FFFULL 0x02
-#define USB_OUTCSR_OUTPKTRDY 0x01
-
-/* Testmode register bits */
-#define USB_TEST_SE0NAK 0x01
-#define USB_TEST_J 0x02
-#define USB_TEST_K 0x04
-#define USB_TEST_PACKET 0x08
-
-/* DMA control bits */
-#define USB_CNTL_ENA 0x01
-#define USB_CNTL_DIR_IN 0x02
-#define USB_CNTL_MODE_1 0x04
-#define USB_CNTL_INTR_EN 0x08
-#define USB_CNTL_EP(n) ((n) << 4)
-#define USB_CNTL_BURST_0 (0 << 9)
-#define USB_CNTL_BURST_4 (1 << 9)
-#define USB_CNTL_BURST_8 (2 << 9)
-#define USB_CNTL_BURST_16 (3 << 9)
-
-
-
-/* Module Operation Definitions */
-#ifndef __ASSEMBLY__
-
-
-/* GPIO Pins Description */
-/* PORT 0: */
-/* PIN/BIT N FUNC0 FUNC1 */
-/* 0 D0 - */
-/* 1 D1 - */
-/* 2 D2 - */
-/* 3 D3 - */
-/* 4 D4 - */
-/* 5 D5 - */
-/* 6 D6 - */
-/* 7 D7 - */
-/* 8 D8 - */
-/* 9 D9 - */
-/* 10 D10 - */
-/* 11 D11 - */
-/* 12 D12 - */
-/* 13 D13 - */
-/* 14 D14 - */
-/* 15 D15 - */
-/* 16 D16 - */
-/* 17 D17 - */
-/* 18 D18 - */
-/* 19 D19 - */
-/* 20 D20 - */
-/* 21 D21 - */
-/* 22 D22 - */
-/* 23 D23 - */
-/* 24 D24 - */
-/* 25 D25 - */
-/* 26 D26 - */
-/* 27 D27 - */
-/* 28 D28 - */
-/* 29 D29 - */
-/* 30 D30 - */
-/* 31 D31 - */
-/*------------------------------------------------------ */
-/* PORT 1: */
-/* */
-/* PIN/BIT N FUNC0 FUNC1 */
-/* 0 A0 - */
-/* 1 A1 - */
-/* 2 A2 - */
-/* 3 A3 - */
-/* 4 A4 - */
-/* 5 A5 - */
-/* 6 A6 - */
-/* 7 A7 - */
-/* 8 A8 - */
-/* 9 A9 - */
-/* 10 A10 - */
-/* 11 A11 - */
-/* 12 A12 - */
-/* 13 A13 - */
-/* 14 A14 - */
-/* 15 A15/CL - */
-/* 16 A16/AL - */
-/* 17 LCD_CLS A21 */
-/* 18 LCD_SPL A22 */
-/* 19 DCS# - */
-/* 20 RAS# - */
-/* 21 CAS# - */
-/* 22 RDWE#/BUFD# - */
-/* 23 CKE - */
-/* 24 CKO - */
-/* 25 CS1# - */
-/* 26 CS2# - */
-/* 27 CS3# - */
-/* 28 CS4# - */
-/* 29 RD# - */
-/* 30 WR# - */
-/* 31 WE0# - */
-/* Note: PIN15&16 are CL&AL when connecting to NAND flash. */
-/*------------------------------------------------------ */
-/* PORT 2: */
-/* */
-/* PIN/BIT N FUNC0 FUNC1 */
-/* 0 LCD_D0 - */
-/* 1 LCD_D1 - */
-/* 2 LCD_D2 - */
-/* 3 LCD_D3 - */
-/* 4 LCD_D4 - */
-/* 5 LCD_D5 - */
-/* 6 LCD_D6 - */
-/* 7 LCD_D7 - */
-/* 8 LCD_D8 - */
-/* 9 LCD_D9 - */
-/* 10 LCD_D10 - */
-/* 11 LCD_D11 - */
-/* 12 LCD_D12 - */
-/* 13 LCD_D13 - */
-/* 14 LCD_D14 - */
-/* 15 LCD_D15 - */
-/* 16 LCD_D16 - */
-/* 17 LCD_D17 - */
-/* 18 LCD_PCLK - */
-/* 19 LCD_HSYNC - */
-/* 20 LCD_VSYNC - */
-/* 21 LCD_DE - */
-/* 22 LCD_PS A19 */
-/* 23 LCD_REV A20 */
-/* 24 WE1# - */
-/* 25 WE2# - */
-/* 26 WE3# - */
-/* 27 WAIT# - */
-/* 28 FRE# - */
-/* 29 FWE# - */
-/* 30(NOTE:FRB#) - - */
-/* 31 - - */
-/* NOTE(1): PIN30 is used for FRB# when connecting to NAND flash. */
-/*------------------------------------------------------ */
-/* PORT 3: */
-/* */
-/* PIN/BIT N FUNC0 FUNC1 */
-/* 0 CIM_D0 - */
-/* 1 CIM_D1 - */
-/* 2 CIM_D2 - */
-/* 3 CIM_D3 - */
-/* 4 CIM_D4 - */
-/* 5 CIM_D5 - */
-/* 6 CIM_D6 - */
-/* 7 CIM_D7 - */
-/* 8 MSC_CMD - */
-/* 9 MSC_CLK - */
-/* 10 MSC_D0 - */
-/* 11 MSC_D1 - */
-/* 12 MSC_D2 - */
-/* 13 MSC_D3 - */
-/* 14 CIM_MCLK - */
-/* 15 CIM_PCLK - */
-/* 16 CIM_VSYNC - */
-/* 17 CIM_HSYNC - */
-/* 18 SSI_CLK SCLK_RSTN */
-/* 19 SSI_CE0# BIT_CLK(AIC) */
-/* 20 SSI_DT SDATA_OUT(AIC) */
-/* 21 SSI_DR SDATA_IN(AIC) */
-/* 22 SSI_CE1#&GPC SYNC(AIC) */
-/* 23 PWM0 I2C_SDA */
-/* 24 PWM1 I2C_SCK */
-/* 25 PWM2 UART0_TxD */
-/* 26 PWM3 UART0_RxD */
-/* 27 PWM4 A17 */
-/* 28 PWM5 A18 */
-/* 29 - - */
-/* 30 PWM6 UART0_CTS/UART1_RxD */
-/* 31 PWM7 UART0_RTS/UART1_TxD */
-/*
- * p is the port number (0,1,2,3)
- * o is the pin offset (0-31) inside the port
- * n is the absolute number of a pin (0-127), regardless of the port
- */
-
-/* Function Pins Mode */
-
-#define __gpio_as_func0(n) \
-do { \
- unsigned int p, o; \
- p = (n) / 32; \
- o = (n) % 32; \
- REG_GPIO_PXFUNS(p) = (1 << o); \
- REG_GPIO_PXSELC(p) = (1 << o); \
-} while (0)
-
-#define __gpio_as_func1(n) \
-do { \
- unsigned int p, o; \
- p = (n) / 32; \
- o = (n) % 32; \
- REG_GPIO_PXFUNS(p) = (1 << o); \
- REG_GPIO_PXSELS(p) = (1 << o); \
-} while (0)
-
-/*
- * D0 ~ D31, A0 ~ A16, DCS#, RAS#, CAS#, CKE#,
- * RDWE#, CKO#, WE0#, WE1#, WE2#, WE3#
- */
-#define __gpio_as_sdram_32bit() \
-do { \
- REG_GPIO_PXFUNS(0) = 0xffffffff; \
- REG_GPIO_PXSELC(0) = 0xffffffff; \
- REG_GPIO_PXPES(0) = 0xffffffff; \
- REG_GPIO_PXFUNS(1) = 0x81f9ffff; \
- REG_GPIO_PXSELC(1) = 0x81f9ffff; \
- REG_GPIO_PXPES(1) = 0x81f9ffff; \
- REG_GPIO_PXFUNS(2) = 0x07000000; \
- REG_GPIO_PXSELC(2) = 0x07000000; \
- REG_GPIO_PXPES(2) = 0x07000000; \
-} while (0)
-
-/*
- * D0 ~ D15, A0 ~ A16, DCS#, RAS#, CAS#, CKE#,
- * RDWE#, CKO#, WE0#, WE1#
- */
-#define __gpio_as_sdram_16bit_4720() \
-do { \
- REG_GPIO_PXFUNS(0) = 0x5442bfaa; \
- REG_GPIO_PXSELC(0) = 0x5442bfaa; \
- REG_GPIO_PXPES(0) = 0x5442bfaa; \
- REG_GPIO_PXFUNS(1) = 0x81f9ffff; \
- REG_GPIO_PXSELC(1) = 0x81f9ffff; \
- REG_GPIO_PXPES(1) = 0x81f9ffff; \
- REG_GPIO_PXFUNS(2) = 0x01000000; \
- REG_GPIO_PXSELC(2) = 0x01000000; \
- REG_GPIO_PXPES(2) = 0x01000000; \
-} while (0)
-
-/*
- * D0 ~ D15, A0 ~ A16, DCS#, RAS#, CAS#, CKE#,
- * RDWE#, CKO#, WE0#, WE1#
- */
-#define __gpio_as_sdram_16bit_4725() \
-do { \
- REG_GPIO_PXFUNS(0) = 0x0000ffff; \
- REG_GPIO_PXSELC(0) = 0x0000ffff; \
- REG_GPIO_PXPES(0) = 0x0000ffff; \
- REG_GPIO_PXFUNS(1) = 0x81f9ffff; \
- REG_GPIO_PXSELC(1) = 0x81f9ffff; \
- REG_GPIO_PXPES(1) = 0x81f9ffff; \
- REG_GPIO_PXFUNS(2) = 0x01000000; \
- REG_GPIO_PXSELC(2) = 0x01000000; \
- REG_GPIO_PXPES(2) = 0x01000000; \
-} while (0)
-
-
-/*
- * CS1#, CLE, ALE, FRE#, FWE#, FRB#, RDWE#/BUFD#
- */
-#define __gpio_as_nand() \
-do { \
- REG_GPIO_PXFUNS(1) = 0x02018000; \
- REG_GPIO_PXSELC(1) = 0x02018000; \
- REG_GPIO_PXPES(1) = 0x02018000; \
- REG_GPIO_PXFUNS(2) = 0x30000000; \
- REG_GPIO_PXSELC(2) = 0x30000000; \
- REG_GPIO_PXPES(2) = 0x30000000; \
- REG_GPIO_PXFUNC(2) = 0x40000000; \
- REG_GPIO_PXSELC(2) = 0x40000000; \
- REG_GPIO_PXDIRC(2) = 0x40000000; \
- REG_GPIO_PXPES(2) = 0x40000000; \
- REG_GPIO_PXFUNS(1) = 0x00400000; \
- REG_GPIO_PXSELC(1) = 0x00400000; \
-} while (0)
-
-/*
- * CS4#, RD#, WR#, WAIT#, A0 ~ A22, D0 ~ D7
- */
-#define __gpio_as_nor_8bit() \
-do { \
- REG_GPIO_PXFUNS(0) = 0x000000ff; \
- REG_GPIO_PXSELC(0) = 0x000000ff; \
- REG_GPIO_PXPES(0) = 0x000000ff; \
- REG_GPIO_PXFUNS(1) = 0x7041ffff; \
- REG_GPIO_PXSELC(1) = 0x7041ffff; \
- REG_GPIO_PXPES(1) = 0x7041ffff; \
- REG_GPIO_PXFUNS(1) = 0x00060000; \
- REG_GPIO_PXSELS(1) = 0x00060000; \
- REG_GPIO_PXPES(1) = 0x00060000; \
- REG_GPIO_PXFUNS(2) = 0x08000000; \
- REG_GPIO_PXSELC(2) = 0x08000000; \
- REG_GPIO_PXPES(2) = 0x08000000; \
- REG_GPIO_PXFUNS(2) = 0x00c00000; \
- REG_GPIO_PXSELS(2) = 0x00c00000; \
- REG_GPIO_PXPES(2) = 0x00c00000; \
- REG_GPIO_PXFUNS(3) = 0x18000000; \
- REG_GPIO_PXSELS(3) = 0x18000000; \
- REG_GPIO_PXPES(3) = 0x18000000; \
-} while (0)
-
-/*
- * CS4#, RD#, WR#, WAIT#, A0 ~ A22, D0 ~ D15
- */
-#define __gpio_as_nor_16bit() \
-do { \
- REG_GPIO_PXFUNS(0) = 0x0000ffff; \
- REG_GPIO_PXSELC(0) = 0x0000ffff; \
- REG_GPIO_PXPES(0) = 0x0000ffff; \
- REG_GPIO_PXFUNS(1) = 0x7041ffff; \
- REG_GPIO_PXSELC(1) = 0x7041ffff; \
- REG_GPIO_PXPES(1) = 0x7041ffff; \
- REG_GPIO_PXFUNS(1) = 0x00060000; \
- REG_GPIO_PXSELS(1) = 0x00060000; \
- REG_GPIO_PXPES(1) = 0x00060000; \
- REG_GPIO_PXFUNS(2) = 0x08000000; \
- REG_GPIO_PXSELC(2) = 0x08000000; \
- REG_GPIO_PXPES(2) = 0x08000000; \
- REG_GPIO_PXFUNS(2) = 0x00c00000; \
- REG_GPIO_PXSELS(2) = 0x00c00000; \
- REG_GPIO_PXPES(2) = 0x00c00000; \
- REG_GPIO_PXFUNS(3) = 0x18000000; \
- REG_GPIO_PXSELS(3) = 0x18000000; \
- REG_GPIO_PXPES(3) = 0x18000000; \
-} while (0)
-
-/*
- * UART0_TxD, UART_RxD0
- */
-#define __gpio_as_uart0() \
-do { \
- REG_GPIO_PXFUNS(3) = 0x06000000; \
- REG_GPIO_PXSELS(3) = 0x06000000; \
- REG_GPIO_PXPES(3) = 0x06000000; \
-} while (0)
-
-#define __gpio_jtag_to_uart0() \
-do { \
- REG_GPIO_PXSELS(2) = 0x80000000; \
-} while (0)
-
-/*
- * UART0_CTS, UART0_RTS
- */
-#define __gpio_as_ctsrts() \
-do { \
- REG_GPIO_PXFUNS(3) = 0xc0000000; \
- REG_GPIO_PXSELS(3) = 0xc0000000; \
- REG_GPIO_PXTRGC(3) = 0xc0000000; \
- REG_GPIO_PXPES(3) = 0xc0000000; \
-} while (0)
-
-/*
- * UART1_TxD, UART1_RxD1
- */
-#define __gpio_as_uart1() \
-do { \
- REG_GPIO_PXFUNS(3) = 0xc0000000; \
- REG_GPIO_PXSELC(3) = 0xc0000000; \
- REG_GPIO_PXTRGS(3) = 0xc0000000; \
- REG_GPIO_PXPES(3) = 0xc0000000; \
-} while (0)
-
-/*
- * LCD_D0~LCD_D7, LCD_PCLK, LCD_HSYNC, LCD_VSYNC, LCD_DE
- */
-#define __gpio_as_lcd_8bit() \
-do { \
- REG_GPIO_PXFUNS(2) = 0x003c00ff; \
- REG_GPIO_PXSELC(2) = 0x003c00ff; \
- REG_GPIO_PXPES(2) = 0x003c00ff; \
-} while (0)
-
-/*
- * LCD_D0~LCD_D15, LCD_PCLK, LCD_HSYNC, LCD_VSYNC, LCD_DE
- */
-#define __gpio_as_lcd_16bit() \
-do { \
- REG_GPIO_PXFUNS(2) = 0x003cffff; \
- REG_GPIO_PXSELC(2) = 0x003cffff; \
- REG_GPIO_PXPES(2) = 0x003cffff; \
-} while (0)
-
-/*
- * LCD_D0~LCD_D17, LCD_PCLK, LCD_HSYNC, LCD_VSYNC, LCD_DE
- */
-#define __gpio_as_lcd_18bit() \
-do { \
- REG_GPIO_PXFUNS(2) = 0x003fffff; \
- REG_GPIO_PXSELC(2) = 0x003fffff; \
- REG_GPIO_PXPES(2) = 0x003fffff; \
-} while (0)
-
-
-/* LCD_D0~LCD_D7, SLCD_RS, SLCD_CS */
-#define __gpio_as_slcd_8bit() \
-do { \
- REG_GPIO_PXFUNS(2) = 0x001800ff; \
- REG_GPIO_PXSELC(2) = 0x001800ff; \
-} while (0)
-
-/* LCD_D0~LCD_D7, SLCD_RS, SLCD_CS */
-#define __gpio_as_slcd_9bit() \
-do { \
- REG_GPIO_PXFUNS(2) = 0x001801ff; \
- REG_GPIO_PXSELC(2) = 0x001801ff; \
-} while (0)
-
-/* LCD_D0~LCD_D15, SLCD_RS, SLCD_CS */
-#define __gpio_as_slcd_16bit() \
-do { \
- REG_GPIO_PXFUNS(2) = 0x0018ffff; \
- REG_GPIO_PXSELC(2) = 0x0018ffff; \
-} while (0)
-
-/* LCD_D0~LCD_D17, SLCD_RS, SLCD_CS */
-#define __gpio_as_slcd_18bit() \
-do { \
- REG_GPIO_PXFUNS(2) = 0x001bffff; \
- REG_GPIO_PXSELC(2) = 0x001bffff; \
-} while (0)
-/*
- * CIM_D0~CIM_D7, CIM_MCLK, CIM_PCLK, CIM_VSYNC, CIM_HSYNC
- */
-#define __gpio_as_cim() \
-do { \
- REG_GPIO_PXFUNS(3) = 0x0003c0ff; \
- REG_GPIO_PXSELC(3) = 0x0003c0ff; \
- REG_GPIO_PXPES(3) = 0x0003c0ff; \
-} while (0)
-
-/*
- * SDATA_OUT, SDATA_IN, BIT_CLK, SYNC, SCLK_RESET
- */
-#define __gpio_as_aic() \
-do { \
- REG_GPIO_PXFUNS(3) = 0x007c0000; \
- REG_GPIO_PXSELS(3) = 0x007c0000; \
- REG_GPIO_PXPES(3) = 0x007c0000; \
-} while (0)
-
-/*
- * MSC_CMD, MSC_CLK, MSC_D0 ~ MSC_D3
- */
-#define __gpio_as_msc() \
-do { \
- REG_GPIO_PXFUNS(3) = 0x00003f00; \
- REG_GPIO_PXSELC(3) = 0x00003f00; \
- REG_GPIO_PXPES(3) = 0x00003f00; \
-} while (0)
-
-/*
- * SSI_CS0, SSI_CLK, SSI_DT, SSI_DR
- */
-#define __gpio_as_ssi() \
-do { \
- REG_GPIO_PXFUNS(3) = 0x003c0000; \
- REG_GPIO_PXSELC(3) = 0x003c0000; \
- REG_GPIO_PXPES(3) = 0x003c0000; \
-} while (0)
-
-/*
- * I2C_SCK, I2C_SDA
- */
-#define __gpio_as_i2c() \
-do { \
- REG_GPIO_PXFUNS(3) = 0x01800000; \
- REG_GPIO_PXSELS(3) = 0x01800000; \
- REG_GPIO_PXPES(3) = 0x01800000; \
-} while (0)
-
-/*
- * PWM0
- */
-#define __gpio_as_pwm0() \
-do { \
- REG_GPIO_PXFUNS(3) = 0x00800000; \
- REG_GPIO_PXSELC(3) = 0x00800000; \
- REG_GPIO_PXPES(3) = 0x00800000; \
-} while (0)
-
-/*
- * PWM1
- */
-#define __gpio_as_pwm1() \
-do { \
- REG_GPIO_PXFUNS(3) = 0x01000000; \
- REG_GPIO_PXSELC(3) = 0x01000000; \
- REG_GPIO_PXPES(3) = 0x01000000; \
-} while (0)
-
-/*
- * PWM2
- */
-#define __gpio_as_pwm2() \
-do { \
- REG_GPIO_PXFUNS(3) = 0x02000000; \
- REG_GPIO_PXSELC(3) = 0x02000000; \
- REG_GPIO_PXPES(3) = 0x02000000; \
-} while (0)
-
-/*
- * PWM3
- */
-#define __gpio_as_pwm3() \
-do { \
- REG_GPIO_PXFUNS(3) = 0x04000000; \
- REG_GPIO_PXSELC(3) = 0x04000000; \
- REG_GPIO_PXPES(3) = 0x04000000; \
-} while (0)
-
-/*
- * PWM4
- */
-#define __gpio_as_pwm4() \
-do { \
- REG_GPIO_PXFUNS(3) = 0x08000000; \
- REG_GPIO_PXSELC(3) = 0x08000000; \
- REG_GPIO_PXPES(3) = 0x08000000; \
-} while (0)
-
-/*
- * PWM5
- */
-#define __gpio_as_pwm5() \
-do { \
- REG_GPIO_PXFUNS(3) = 0x10000000; \
- REG_GPIO_PXSELC(3) = 0x10000000; \
- REG_GPIO_PXPES(3) = 0x10000000; \
-} while (0)
-
-/*
- * PWM6
- */
-#define __gpio_as_pwm6() \
-do { \
- REG_GPIO_PXFUNS(3) = 0x40000000; \
- REG_GPIO_PXSELC(3) = 0x40000000; \
- REG_GPIO_PXPES(3) = 0x40000000; \
-} while (0)
-
-/*
- * PWM7
- */
-#define __gpio_as_pwm7() \
-do { \
- REG_GPIO_PXFUNS(3) = 0x80000000; \
- REG_GPIO_PXSELC(3) = 0x80000000; \
- REG_GPIO_PXPES(3) = 0x80000000; \
-} while (0)
-
-/*
- * n = 0 ~ 7
- */
-#define __gpio_as_pwm(n) __gpio_as_pwm##n()
-
-/* GPIO or Interrupt Mode */
-
-#define __gpio_get_port(p) (REG_GPIO_PXPIN(p))
-
-#define __gpio_port_as_output(p, o) \
-do { \
- REG_GPIO_PXFUNC(p) = (1 << (o)); \
- REG_GPIO_PXSELC(p) = (1 << (o)); \
- REG_GPIO_PXDIRS(p) = (1 << (o)); \
-} while (0)
-
-#define __gpio_port_as_input(p, o) \
-do { \
- REG_GPIO_PXFUNC(p) = (1 << (o)); \
- REG_GPIO_PXSELC(p) = (1 << (o)); \
- REG_GPIO_PXDIRC(p) = (1 << (o)); \
-} while (0)
-
-#define __gpio_as_output(n) \
-do { \
- unsigned int p, o; \
- p = (n) / 32; \
- o = (n) % 32; \
- __gpio_port_as_output(p, o); \
-} while (0)
-
-#define __gpio_as_input(n) \
-do { \
- unsigned int p, o; \
- p = (n) / 32; \
- o = (n) % 32; \
- __gpio_port_as_input(p, o); \
-} while (0)
-
-#define __gpio_set_pin(n) \
-do { \
- unsigned int p, o; \
- p = (n) / 32; \
- o = (n) % 32; \
- REG_GPIO_PXDATS(p) = (1 << o); \
-} while (0)
-
-#define __gpio_clear_pin(n) \
-do { \
- unsigned int p, o; \
- p = (n) / 32; \
- o = (n) % 32; \
- REG_GPIO_PXDATC(p) = (1 << o); \
-} while (0)
-
-#define __gpio_get_pin(n) \
-({ \
- unsigned int p, o, v; \
- p = (n) / 32; \
- o = (n) % 32; \
- if (__gpio_get_port(p) & (1 << o)) \
- v = 1; \
- else \
- v = 0; \
- v; \
-})
-
-#define __gpio_as_irq_high_level(n) \
-do { \
- unsigned int p, o; \
- p = (n) / 32; \
- o = (n) % 32; \
- REG_GPIO_PXIMS(p) = (1 << o); \
- REG_GPIO_PXTRGC(p) = (1 << o); \
- REG_GPIO_PXFUNC(p) = (1 << o); \
- REG_GPIO_PXSELS(p) = (1 << o); \
- REG_GPIO_PXDIRS(p) = (1 << o); \
- REG_GPIO_PXFLGC(p) = (1 << o); \
- REG_GPIO_PXIMC(p) = (1 << o); \
-} while (0)
-
-#define __gpio_as_irq_low_level(n) \
-do { \
- unsigned int p, o; \
- p = (n) / 32; \
- o = (n) % 32; \
- REG_GPIO_PXIMS(p) = (1 << o); \
- REG_GPIO_PXTRGC(p) = (1 << o); \
- REG_GPIO_PXFUNC(p) = (1 << o); \
- REG_GPIO_PXSELS(p) = (1 << o); \
- REG_GPIO_PXDIRC(p) = (1 << o); \
- REG_GPIO_PXFLGC(p) = (1 << o); \
- REG_GPIO_PXIMC(p) = (1 << o); \
-} while (0)
-
-#define __gpio_as_irq_rise_edge(n) \
-do { \
- unsigned int p, o; \
- p = (n) / 32; \
- o = (n) % 32; \
- REG_GPIO_PXIMS(p) = (1 << o); \
- REG_GPIO_PXTRGS(p) = (1 << o); \
- REG_GPIO_PXFUNC(p) = (1 << o); \
- REG_GPIO_PXSELS(p) = (1 << o); \
- REG_GPIO_PXDIRS(p) = (1 << o); \
- REG_GPIO_PXFLGC(p) = (1 << o); \
- REG_GPIO_PXIMC(p) = (1 << o); \
-} while (0)
-
-#define __gpio_as_irq_fall_edge(n) \
-do { \
- unsigned int p, o; \
- p = (n) / 32; \
- o = (n) % 32; \
- REG_GPIO_PXIMS(p) = (1 << o); \
- REG_GPIO_PXTRGS(p) = (1 << o); \
- REG_GPIO_PXFUNC(p) = (1 << o); \
- REG_GPIO_PXSELS(p) = (1 << o); \
- REG_GPIO_PXDIRC(p) = (1 << o); \
- REG_GPIO_PXFLGC(p) = (1 << o); \
- REG_GPIO_PXIMC(p) = (1 << o); \
-} while (0)
-
-#define __gpio_mask_irq(n) \
-do { \
- unsigned int p, o; \
- p = (n) / 32; \
- o = (n) % 32; \
- REG_GPIO_PXIMS(p) = (1 << o); \
-} while (0)
-
-#define __gpio_unmask_irq(n) \
-do { \
- unsigned int p, o; \
- p = (n) / 32; \
- o = (n) % 32; \
- REG_GPIO_PXIMC(p) = (1 << o); \
-} while (0)
-
-#define __gpio_ack_irq(n) \
-do { \
- unsigned int p, o; \
- p = (n) / 32; \
- o = (n) % 32; \
- REG_GPIO_PXFLGC(p) = (1 << o); \
-} while (0)
-
-#define __gpio_get_irq() \
-({ \
- unsigned int p, i, tmp, v = 0; \
- for (p = 3; p >= 0; p--) { \
- tmp = REG_GPIO_PXFLG(p); \
- for (i = 0; i < 32; i++) \
- if (tmp & (1 << i)) \
- v = (32*p + i); \
- } \
- v; \
-})
-
-#define __gpio_group_irq(n) \
-({ \
- register int tmp, i; \
- tmp = REG_GPIO_PXFLG((n)); \
- for (i=31;i>=0;i--) \
- if (tmp & (1 << i)) \
- break; \
- i; \
-})
-
-#define __gpio_enable_pull(n) \
-do { \
- unsigned int p, o; \
- p = (n) / 32; \
- o = (n) % 32; \
- REG_GPIO_PXPEC(p) = (1 << o); \
-} while (0)
-
-#define __gpio_disable_pull(n) \
-do { \
- unsigned int p, o; \
- p = (n) / 32; \
- o = (n) % 32; \
- REG_GPIO_PXPES(p) = (1 << o); \
-} while (0)
-
-
-/***************************************************************************
- * CPM
- ***************************************************************************/
-#define __cpm_get_pllm() \
- ((REG_CPM_CPPCR & CPM_CPPCR_PLLM_MASK) >> CPM_CPPCR_PLLM_BIT)
-#define __cpm_get_plln() \
- ((REG_CPM_CPPCR & CPM_CPPCR_PLLN_MASK) >> CPM_CPPCR_PLLN_BIT)
-#define __cpm_get_pllod() \
- ((REG_CPM_CPPCR & CPM_CPPCR_PLLOD_MASK) >> CPM_CPPCR_PLLOD_BIT)
-
-#define __cpm_get_cdiv() \
- ((REG_CPM_CPCCR & CPM_CPCCR_CDIV_MASK) >> CPM_CPCCR_CDIV_BIT)
-#define __cpm_get_hdiv() \
- ((REG_CPM_CPCCR & CPM_CPCCR_HDIV_MASK) >> CPM_CPCCR_HDIV_BIT)
-#define __cpm_get_pdiv() \
- ((REG_CPM_CPCCR & CPM_CPCCR_PDIV_MASK) >> CPM_CPCCR_PDIV_BIT)
-#define __cpm_get_mdiv() \
- ((REG_CPM_CPCCR & CPM_CPCCR_MDIV_MASK) >> CPM_CPCCR_MDIV_BIT)
-#define __cpm_get_ldiv() \
- ((REG_CPM_CPCCR & CPM_CPCCR_LDIV_MASK) >> CPM_CPCCR_LDIV_BIT)
-#define __cpm_get_udiv() \
- ((REG_CPM_CPCCR & CPM_CPCCR_UDIV_MASK) >> CPM_CPCCR_UDIV_BIT)
-#define __cpm_get_i2sdiv() \
- ((REG_CPM_I2SCDR & CPM_I2SCDR_I2SDIV_MASK) >> CPM_I2SCDR_I2SDIV_BIT)
-#define __cpm_get_pixdiv() \
- ((REG_CPM_LPCDR & CPM_LPCDR_PIXDIV_MASK) >> CPM_LPCDR_PIXDIV_BIT)
-#define __cpm_get_mscdiv() \
- ((REG_CPM_MSCCDR & CPM_MSCCDR_MSCDIV_MASK) >> CPM_MSCCDR_MSCDIV_BIT)
-
-#define __cpm_set_cdiv(v) \
- (REG_CPM_CPCCR = (REG_CPM_CPCCR & ~CPM_CPCCR_CDIV_MASK) | ((v) << (CPM_CPCCR_CDIV_BIT)))
-#define __cpm_set_hdiv(v) \
- (REG_CPM_CPCCR = (REG_CPM_CPCCR & ~CPM_CPCCR_HDIV_MASK) | ((v) << (CPM_CPCCR_HDIV_BIT)))
-#define __cpm_set_pdiv(v) \
- (REG_CPM_CPCCR = (REG_CPM_CPCCR & ~CPM_CPCCR_PDIV_MASK) | ((v) << (CPM_CPCCR_PDIV_BIT)))
-#define __cpm_set_mdiv(v) \
- (REG_CPM_CPCCR = (REG_CPM_CPCCR & ~CPM_CPCCR_MDIV_MASK) | ((v) << (CPM_CPCCR_MDIV_BIT)))
-#define __cpm_set_ldiv(v) \
- (REG_CPM_CPCCR = (REG_CPM_CPCCR & ~CPM_CPCCR_LDIV_MASK) | ((v) << (CPM_CPCCR_LDIV_BIT)))
-#define __cpm_set_udiv(v) \
- (REG_CPM_CPCCR = (REG_CPM_CPCCR & ~CPM_CPCCR_UDIV_MASK) | ((v) << (CPM_CPCCR_UDIV_BIT)))
-#define __cpm_set_i2sdiv(v) \
- (REG_CPM_I2SCDR = (REG_CPM_I2SCDR & ~CPM_I2SCDR_I2SDIV_MASK) | ((v) << (CPM_I2SCDR_I2SDIV_BIT)))
-#define __cpm_set_pixdiv(v) \
- (REG_CPM_LPCDR = (REG_CPM_LPCDR & ~CPM_LPCDR_PIXDIV_MASK) | ((v) << (CPM_LPCDR_PIXDIV_BIT)))
-#define __cpm_set_mscdiv(v) \
- (REG_CPM_MSCCDR = (REG_CPM_MSCCDR & ~CPM_MSCCDR_MSCDIV_MASK) | ((v) << (CPM_MSCCDR_MSCDIV_BIT)))
-
-#define __cpm_select_i2sclk_exclk() (REG_CPM_CPCCR &= ~CPM_CPCCR_I2CS)
-#define __cpm_select_i2sclk_pll() (REG_CPM_CPCCR |= CPM_CPCCR_I2CS)
-#define __cpm_enable_cko() (REG_CPM_CPCCR |= CPM_CPCCR_CLKOEN)
-#define __cpm_select_usbclk_exclk() (REG_CPM_CPCCR &= ~CPM_CPCCR_UCS)
-#define __cpm_select_usbclk_pll() (REG_CPM_CPCCR |= CPM_CPCCR_UCS)
-#define __cpm_enable_pll_change() (REG_CPM_CPCCR |= CPM_CPCCR_CE)
-#define __cpm_pllout_direct() (REG_CPM_CPCCR |= CPM_CPCCR_PCS)
-#define __cpm_pllout_div2() (REG_CPM_CPCCR &= ~CPM_CPCCR_PCS)
-
-#define __cpm_pll_is_on() (REG_CPM_CPPCR & CPM_CPPCR_PLLS)
-#define __cpm_pll_bypass() (REG_CPM_CPPCR |= CPM_CPPCR_PLLBP)
-#define __cpm_pll_enable() (REG_CPM_CPPCR |= CPM_CPPCR_PLLEN)
-
-#define __cpm_get_cclk_doze_duty() \
- ((REG_CPM_LCR & CPM_LCR_DOZE_DUTY_MASK) >> CPM_LCR_DOZE_DUTY_BIT)
-#define __cpm_set_cclk_doze_duty(v) \
- (REG_CPM_LCR = (REG_CPM_LCR & ~CPM_LCR_DOZE_DUTY_MASK) | ((v) << (CPM_LCR_DOZE_DUTY_BIT)))
-
-#define __cpm_doze_mode() (REG_CPM_LCR |= CPM_LCR_DOZE_ON)
-#define __cpm_idle_mode() \
- (REG_CPM_LCR = (REG_CPM_LCR & ~CPM_LCR_LPM_MASK) | CPM_LCR_LPM_IDLE)
-#define __cpm_sleep_mode() \
- (REG_CPM_LCR = (REG_CPM_LCR & ~CPM_LCR_LPM_MASK) | CPM_LCR_LPM_SLEEP)
-
-#define __cpm_stop_all() (REG_CPM_CLKGR = 0x7fff)
-#define __cpm_stop_uart1() (REG_CPM_CLKGR |= CPM_CLKGR_UART1)
-#define __cpm_stop_uhc() (REG_CPM_CLKGR |= CPM_CLKGR_UHC)
-#define __cpm_stop_ipu() (REG_CPM_CLKGR |= CPM_CLKGR_IPU)
-#define __cpm_stop_dmac() (REG_CPM_CLKGR |= CPM_CLKGR_DMAC)
-#define __cpm_stop_udc() (REG_CPM_CLKGR |= CPM_CLKGR_UDC)
-#define __cpm_stop_lcd() (REG_CPM_CLKGR |= CPM_CLKGR_LCD)
-#define __cpm_stop_cim() (REG_CPM_CLKGR |= CPM_CLKGR_CIM)
-#define __cpm_stop_sadc() (REG_CPM_CLKGR |= CPM_CLKGR_SADC)
-#define __cpm_stop_msc() (REG_CPM_CLKGR |= CPM_CLKGR_MSC)
-#define __cpm_stop_aic1() (REG_CPM_CLKGR |= CPM_CLKGR_AIC1)
-#define __cpm_stop_aic2() (REG_CPM_CLKGR |= CPM_CLKGR_AIC2)
-#define __cpm_stop_ssi() (REG_CPM_CLKGR |= CPM_CLKGR_SSI)
-#define __cpm_stop_i2c() (REG_CPM_CLKGR |= CPM_CLKGR_I2C)
-#define __cpm_stop_rtc() (REG_CPM_CLKGR |= CPM_CLKGR_RTC)
-#define __cpm_stop_tcu() (REG_CPM_CLKGR |= CPM_CLKGR_TCU)
-#define __cpm_stop_uart0() (REG_CPM_CLKGR |= CPM_CLKGR_UART0)
-
-#define __cpm_start_all() (REG_CPM_CLKGR = 0x0)
-#define __cpm_start_uart1() (REG_CPM_CLKGR &= ~CPM_CLKGR_UART1)
-#define __cpm_start_uhc() (REG_CPM_CLKGR &= ~CPM_CLKGR_UHC)
-#define __cpm_start_ipu() (REG_CPM_CLKGR &= ~CPM_CLKGR_IPU)
-#define __cpm_start_dmac() (REG_CPM_CLKGR &= ~CPM_CLKGR_DMAC)
-#define __cpm_start_udc() (REG_CPM_CLKGR &= ~CPM_CLKGR_UDC)
-#define __cpm_start_lcd() (REG_CPM_CLKGR &= ~CPM_CLKGR_LCD)
-#define __cpm_start_cim() (REG_CPM_CLKGR &= ~CPM_CLKGR_CIM)
-#define __cpm_start_sadc() (REG_CPM_CLKGR &= ~CPM_CLKGR_SADC)
-#define __cpm_start_msc() (REG_CPM_CLKGR &= ~CPM_CLKGR_MSC)
-#define __cpm_start_aic1() (REG_CPM_CLKGR &= ~CPM_CLKGR_AIC1)
-#define __cpm_start_aic2() (REG_CPM_CLKGR &= ~CPM_CLKGR_AIC2)
-#define __cpm_start_ssi() (REG_CPM_CLKGR &= ~CPM_CLKGR_SSI)
-#define __cpm_start_i2c() (REG_CPM_CLKGR &= ~CPM_CLKGR_I2C)
-#define __cpm_start_rtc() (REG_CPM_CLKGR &= ~CPM_CLKGR_RTC)
-#define __cpm_start_tcu() (REG_CPM_CLKGR &= ~CPM_CLKGR_TCU)
-#define __cpm_start_uart0() (REG_CPM_CLKGR &= ~CPM_CLKGR_UART0)
-
-#define __cpm_get_o1st() \
- ((REG_CPM_SCR & CPM_SCR_O1ST_MASK) >> CPM_SCR_O1ST_BIT)
-#define __cpm_set_o1st(v) \
- (REG_CPM_SCR = (REG_CPM_SCR & ~CPM_SCR_O1ST_MASK) | ((v) << (CPM_SCR_O1ST_BIT)))
-#define __cpm_suspend_udcphy() (REG_CPM_SCR &= ~CPM_SCR_UDCPHY_ENABLE)
-#define __cpm_suspend_usbphy() (REG_CPM_SCR |= CPM_SCR_USBPHY_DISABLE)
-#define __cpm_enable_osc_in_sleep() (REG_CPM_SCR |= CPM_SCR_OSC_ENABLE)
-
-
-#ifdef CONFIG_SYS_EXTAL
-#define JZ_EXTAL CONFIG_SYS_EXTAL
-#else
-#define JZ_EXTAL 3686400
-#endif
-#define JZ_EXTAL2 32768 /* RTC clock */
-
-/* PLL output frequency */
-static __inline__ unsigned int __cpm_get_pllout(void)
-{
- unsigned long m, n, no, pllout;
- unsigned long cppcr = REG_CPM_CPPCR;
- unsigned long od[4] = {1, 2, 2, 4};
- if ((cppcr & CPM_CPPCR_PLLEN) && !(cppcr & CPM_CPPCR_PLLBP)) {
- m = __cpm_get_pllm() + 2;
- n = __cpm_get_plln() + 2;
- no = od[__cpm_get_pllod()];
- pllout = ((JZ_EXTAL) / (n * no)) * m;
- } else
- pllout = JZ_EXTAL;
- return pllout;
-}
-
-/* PLL output frequency for MSC/I2S/LCD/USB */
-static __inline__ unsigned int __cpm_get_pllout2(void)
-{
- if (REG_CPM_CPCCR & CPM_CPCCR_PCS)
- return __cpm_get_pllout();
- else
- return __cpm_get_pllout()/2;
-}
-
-/* CPU core clock */
-static __inline__ unsigned int __cpm_get_cclk(void)
-{
- int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
-
- return __cpm_get_pllout() / div[__cpm_get_cdiv()];
-}
-
-/* AHB system bus clock */
-static __inline__ unsigned int __cpm_get_hclk(void)
-{
- int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
-
- return __cpm_get_pllout() / div[__cpm_get_hdiv()];
-}
-
-/* Memory bus clock */
-static __inline__ unsigned int __cpm_get_mclk(void)
-{
- int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
-
- return __cpm_get_pllout() / div[__cpm_get_mdiv()];
-}
-
-/* APB peripheral bus clock */
-static __inline__ unsigned int __cpm_get_pclk(void)
-{
- int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
-
- return __cpm_get_pllout() / div[__cpm_get_pdiv()];
-}
-
-/* LCDC module clock */
-static __inline__ unsigned int __cpm_get_lcdclk(void)
-{
- return __cpm_get_pllout2() / (__cpm_get_ldiv() + 1);
-}
-
-/* LCD pixel clock */
-static __inline__ unsigned int __cpm_get_pixclk(void)
-{
- return __cpm_get_pllout2() / (__cpm_get_pixdiv() + 1);
-}
-
-/* I2S clock */
-static __inline__ unsigned int __cpm_get_i2sclk(void)
-{
- if (REG_CPM_CPCCR & CPM_CPCCR_I2CS) {
- return __cpm_get_pllout2() / (__cpm_get_i2sdiv() + 1);
- }
- else {
- return JZ_EXTAL;
- }
-}
-
-/* USB clock */
-static __inline__ unsigned int __cpm_get_usbclk(void)
-{
- if (REG_CPM_CPCCR & CPM_CPCCR_UCS) {
- return __cpm_get_pllout2() / (__cpm_get_udiv() + 1);
- }
- else {
- return JZ_EXTAL;
- }
-}
-
-/* MSC clock */
-static __inline__ unsigned int __cpm_get_mscclk(void)
-{
- return __cpm_get_pllout2() / (__cpm_get_mscdiv() + 1);
-}
-
-/* EXTAL clock for UART,I2C,SSI,TCU,USB-PHY */
-static __inline__ unsigned int __cpm_get_extalclk(void)
-{
- return JZ_EXTAL;
-}
-
-/* RTC clock for CPM,INTC,RTC,TCU,WDT */
-static __inline__ unsigned int __cpm_get_rtcclk(void)
-{
- return JZ_EXTAL2;
-}
-
-/*
- * Output 24MHz for SD and 16MHz for MMC.
- */
-static inline void __cpm_select_msc_clk(int sd)
-{
- unsigned int pllout2 = __cpm_get_pllout2();
- unsigned int div = 0;
-
- if (sd) {
- div = pllout2 / 24000000;
- }
- else {
- div = pllout2 / 16000000;
- }
-
- REG_CPM_MSCCDR = div - 1;
-}
-
-/*
- * TCU
- */
-/* where 'n' is the TCU channel */
-#define __tcu_select_extalclk(n) \
- (REG_TCU_TCSR((n)) = (REG_TCU_TCSR((n)) & ~(TCU_TCSR_EXT_EN | TCU_TCSR_RTC_EN | TCU_TCSR_PCK_EN)) | TCU_TCSR_EXT_EN)
-#define __tcu_select_rtcclk(n) \
- (REG_TCU_TCSR((n)) = (REG_TCU_TCSR((n)) & ~(TCU_TCSR_EXT_EN | TCU_TCSR_RTC_EN | TCU_TCSR_PCK_EN)) | TCU_TCSR_RTC_EN)
-#define __tcu_select_pclk(n) \
- (REG_TCU_TCSR((n)) = (REG_TCU_TCSR((n)) & ~(TCU_TCSR_EXT_EN | TCU_TCSR_RTC_EN | TCU_TCSR_PCK_EN)) | TCU_TCSR_PCK_EN)
-
-#define __tcu_select_clk_div1(n) \
- (REG_TCU_TCSR((n)) = (REG_TCU_TCSR((n)) & ~TCU_TCSR_PRESCALE_MASK) | TCU_TCSR_PRESCALE1)
-#define __tcu_select_clk_div4(n) \
- (REG_TCU_TCSR((n)) = (REG_TCU_TCSR((n)) & ~TCU_TCSR_PRESCALE_MASK) | TCU_TCSR_PRESCALE4)
-#define __tcu_select_clk_div16(n) \
- (REG_TCU_TCSR((n)) = (REG_TCU_TCSR((n)) & ~TCU_TCSR_PRESCALE_MASK) | TCU_TCSR_PRESCALE16)
-#define __tcu_select_clk_div64(n) \
- (REG_TCU_TCSR((n)) = (REG_TCU_TCSR((n)) & ~TCU_TCSR_PRESCALE_MASK) | TCU_TCSR_PRESCALE64)
-#define __tcu_select_clk_div256(n) \
- (REG_TCU_TCSR((n)) = (REG_TCU_TCSR((n)) & ~TCU_TCSR_PRESCALE_MASK) | TCU_TCSR_PRESCALE256)
-#define __tcu_select_clk_div1024(n) \
- (REG_TCU_TCSR((n)) = (REG_TCU_TCSR((n)) & ~TCU_TCSR_PRESCALE_MASK) | TCU_TCSR_PRESCALE1024)
-
-#define __tcu_enable_pwm_output(n) ( REG_TCU_TCSR((n)) |= TCU_TCSR_PWM_EN )
-#define __tcu_disable_pwm_output(n) ( REG_TCU_TCSR((n)) &= ~TCU_TCSR_PWM_EN )
-
-#define __tcu_init_pwm_output_high(n) ( REG_TCU_TCSR((n)) |= TCU_TCSR_PWM_INITL_HIGH )
-#define __tcu_init_pwm_output_low(n) ( REG_TCU_TCSR((n)) &= ~TCU_TCSR_PWM_INITL_HIGH )
-
-#define __tcu_set_pwm_output_shutdown_graceful(n) ( REG_TCU_TCSR((n)) &= ~TCU_TCSR_PWM_SD )
-#define __tcu_set_pwm_output_shutdown_abrupt(n) ( REG_TCU_TCSR((n)) |= TCU_TCSR_PWM_SD )
-
-#define __tcu_start_counter(n) ( REG_TCU_TESR |= (1 << (n)) )
-#define __tcu_stop_counter(n) ( REG_TCU_TECR |= (1 << (n)) )
-
-#define __tcu_half_match_flag(n) ( REG_TCU_TFR & (1 << ((n) + 16)) )
-#define __tcu_full_match_flag(n) ( REG_TCU_TFR & (1 << (n)) )
-#define __tcu_set_half_match_flag(n) ( REG_TCU_TFSR = (1 << ((n) + 16)) )
-#define __tcu_set_full_match_flag(n) ( REG_TCU_TFSR = (1 << (n)) )
-#define __tcu_clear_half_match_flag(n) ( REG_TCU_TFCR = (1 << ((n) + 16)) )
-#define __tcu_clear_full_match_flag(n) ( REG_TCU_TFCR = (1 << (n)) )
-#define __tcu_mask_half_match_irq(n) ( REG_TCU_TMSR = (1 << ((n) + 16)) )
-#define __tcu_mask_full_match_irq(n) ( REG_TCU_TMSR = (1 << (n)) )
-#define __tcu_unmask_half_match_irq(n) ( REG_TCU_TMCR = (1 << ((n) + 16)) )
-#define __tcu_unmask_full_match_irq(n) ( REG_TCU_TMCR = (1 << (n)) )
-
-#define __tcu_wdt_clock_stopped() ( REG_TCU_TSR & TCU_TSSR_WDTSC )
-#define __tcu_timer_clock_stopped(n) ( REG_TCU_TSR & (1 << (n)) )
-
-#define __tcu_start_wdt_clock() ( REG_TCU_TSCR = TCU_TSSR_WDTSC )
-#define __tcu_start_timer_clock(n) ( REG_TCU_TSCR = (1 << (n)) )
-
-#define __tcu_stop_wdt_clock() ( REG_TCU_TSSR = TCU_TSSR_WDTSC )
-#define __tcu_stop_timer_clock(n) ( REG_TCU_TSSR = (1 << (n)) )
-
-#define __tcu_get_count(n) ( REG_TCU_TCNT((n)) )
-#define __tcu_set_count(n,v) ( REG_TCU_TCNT((n)) = (v) )
-#define __tcu_set_full_data(n,v) ( REG_TCU_TDFR((n)) = (v) )
-#define __tcu_set_half_data(n,v) ( REG_TCU_TDHR((n)) = (v) )
-
-
-/***************************************************************************
- * WDT
- ***************************************************************************/
-#define __wdt_start() ( REG_WDT_TCER |= WDT_TCER_TCEN )
-#define __wdt_stop() ( REG_WDT_TCER &= ~WDT_TCER_TCEN )
-#define __wdt_set_count(v) ( REG_WDT_TCNT = (v) )
-#define __wdt_set_data(v) ( REG_WDT_TDR = (v) )
-
-#define __wdt_select_extalclk() \
- (REG_WDT_TCSR = (REG_WDT_TCSR & ~(WDT_TCSR_EXT_EN | WDT_TCSR_RTC_EN | WDT_TCSR_PCK_EN)) | WDT_TCSR_EXT_EN)
-#define __wdt_select_rtcclk() \
- (REG_WDT_TCSR = (REG_WDT_TCSR & ~(WDT_TCSR_EXT_EN | WDT_TCSR_RTC_EN | WDT_TCSR_PCK_EN)) | WDT_TCSR_RTC_EN)
-#define __wdt_select_pclk() \
- (REG_WDT_TCSR = (REG_WDT_TCSR & ~(WDT_TCSR_EXT_EN | WDT_TCSR_RTC_EN | WDT_TCSR_PCK_EN)) | WDT_TCSR_PCK_EN)
-
-#define __wdt_select_clk_div1() \
- (REG_WDT_TCSR = (REG_WDT_TCSR & ~WDT_TCSR_PRESCALE_MASK) | WDT_TCSR_PRESCALE1)
-#define __wdt_select_clk_div4() \
- (REG_WDT_TCSR = (REG_WDT_TCSR & ~WDT_TCSR_PRESCALE_MASK) | WDT_TCSR_PRESCALE4)
-#define __wdt_select_clk_div16() \
- (REG_WDT_TCSR = (REG_WDT_TCSR & ~WDT_TCSR_PRESCALE_MASK) | WDT_TCSR_PRESCALE16)
-#define __wdt_select_clk_div64() \
- (REG_WDT_TCSR = (REG_WDT_TCSR & ~WDT_TCSR_PRESCALE_MASK) | WDT_TCSR_PRESCALE64)
-#define __wdt_select_clk_div256() \
- (REG_WDT_TCSR = (REG_WDT_TCSR & ~WDT_TCSR_PRESCALE_MASK) | WDT_TCSR_PRESCALE256)
-#define __wdt_select_clk_div1024() \
- (REG_WDT_TCSR = (REG_WDT_TCSR & ~WDT_TCSR_PRESCALE_MASK) | WDT_TCSR_PRESCALE1024)
-
-
-/***************************************************************************
- * UART
- ***************************************************************************/
-
-#define __uart_enable() ( REG8(UART0_FCR) |= UARTFCR_UUE | UARTFCR_FE )
-#define __uart_disable() ( REG8(UART0_FCR) = ~UARTFCR_UUE )
-
-#define __uart_enable_transmit_irq() ( REG8(UART0_IER) |= UARTIER_TIE )
-#define __uart_disable_transmit_irq() ( REG8(UART0_IER) &= ~UARTIER_TIE )
-
-#define __uart_enable_receive_irq() \
- ( REG8(UART0_IER) |= UARTIER_RIE | UARTIER_RLIE | UARTIER_RTIE )
-#define __uart_disable_receive_irq() \
- ( REG8(UART0_IER) &= ~(UARTIER_RIE | UARTIER_RLIE | UARTIER_RTIE) )
-
-#define __uart_enable_loopback() ( REG8(UART0_MCR) |= UARTMCR_LOOP )
-#define __uart_disable_loopback() ( REG8(UART0_MCR) &= ~UARTMCR_LOOP )
-
-#define __uart_set_8n1() ( REG8(UART0_LCR) = UARTLCR_WLEN_8 )
-
-#define __uart_set_baud(devclk, baud) \
- do { \
- REG8(UART0_LCR) |= UARTLCR_DLAB; \
- REG8(UART0_DLLR) = (devclk / 16 / baud) & 0xff; \
- REG8(UART0_DLHR) = ((devclk / 16 / baud) >> 8) & 0xff; \
- REG8(UART0_LCR) &= ~UARTLCR_DLAB; \
- } while (0)
-
-#define __uart_parity_error() ( (REG8(UART0_LSR) & UARTLSR_PER) != 0 )
-#define __uart_clear_errors() \
- ( REG8(UART0_LSR) &= ~(UARTLSR_ORER | UARTLSR_BRK | UARTLSR_FER | UARTLSR_PER | UARTLSR_RFER) )
-
-#define __uart_transmit_fifo_empty() ( (REG8(UART0_LSR) & UARTLSR_TDRQ) != 0 )
-#define __uart_transmit_end() ( (REG8(UART0_LSR) & UARTLSR_TEMT) != 0 )
-#define __uart_transmit_char(ch) ( REG8(UART0_TDR) = (ch) )
-#define __uart_receive_fifo_full() ( (REG8(UART0_LSR) & UARTLSR_DR) != 0 )
-#define __uart_receive_ready() ( (REG8(UART0_LSR) & UARTLSR_DR) != 0 )
-#define __uart_receive_char() REG8(UART0_RDR)
-#define __uart_disable_irda() ( REG8(UART0_SIRCR) &= ~(SIRCR_TSIRE | SIRCR_RSIRE) )
-#define __uart_enable_irda() \
- /* Tx high pulse as 0, Rx low pulse as 0 */ \
- ( REG8(UART0_SIRCR) = SIRCR_TSIRE | SIRCR_RSIRE | SIRCR_RXPL | SIRCR_TPWS )
-
-
-/***************************************************************************
- * DMAC
- ***************************************************************************/
-
-/* n is the DMA channel (0 - 5) */
-
-#define __dmac_enable_module() \
- ( REG_DMAC_DMACR |= DMAC_DMACR_DMAE | DMAC_DMACR_PR_RR )
-#define __dmac_disable_module() \
- ( REG_DMAC_DMACR &= ~DMAC_DMACR_DMAE )
-
-/* p=0,1,2,3 */
-#define __dmac_set_priority(p) \
-do { \
- REG_DMAC_DMACR &= ~DMAC_DMACR_PR_MASK; \
- REG_DMAC_DMACR |= ((p) << DMAC_DMACR_PR_BIT); \
-} while (0)
-
-#define __dmac_test_halt_error() ( REG_DMAC_DMACR & DMAC_DMACR_HLT )
-#define __dmac_test_addr_error() ( REG_DMAC_DMACR & DMAC_DMACR_AR )
-
-#define __dmac_enable_descriptor(n) \
- ( REG_DMAC_DCCSR((n)) &= ~DMAC_DCCSR_NDES )
-#define __dmac_disable_descriptor(n) \
- ( REG_DMAC_DCCSR((n)) |= DMAC_DCCSR_NDES )
-
-#define __dmac_enable_channel(n) \
- ( REG_DMAC_DCCSR((n)) |= DMAC_DCCSR_EN )
-#define __dmac_disable_channel(n) \
- ( REG_DMAC_DCCSR((n)) &= ~DMAC_DCCSR_EN )
-#define __dmac_channel_enabled(n) \
- ( REG_DMAC_DCCSR((n)) & DMAC_DCCSR_EN )
-
-#define __dmac_channel_enable_irq(n) \
- ( REG_DMAC_DCMD((n)) |= DMAC_DCMD_TIE )
-#define __dmac_channel_disable_irq(n) \
- ( REG_DMAC_DCMD((n)) &= ~DMAC_DCMD_TIE )
-
-#define __dmac_channel_transmit_halt_detected(n) \
- ( REG_DMAC_DCCSR((n)) & DMAC_DCCSR_HLT )
-#define __dmac_channel_transmit_end_detected(n) \
- ( REG_DMAC_DCCSR((n)) & DMAC_DCCSR_TT )
-#define __dmac_channel_address_error_detected(n) \
- ( REG_DMAC_DCCSR((n)) & DMAC_DCCSR_AR )
-#define __dmac_channel_count_terminated_detected(n) \
- ( REG_DMAC_DCCSR((n)) & DMAC_DCCSR_CT )
-#define __dmac_channel_descriptor_invalid_detected(n) \
- ( REG_DMAC_DCCSR((n)) & DMAC_DCCSR_INV )
-
-#define __dmac_channel_clear_transmit_halt(n) \
- ( REG_DMAC_DCCSR(n) &= ~DMAC_DCCSR_HLT )
-#define __dmac_channel_clear_transmit_end(n) \
- ( REG_DMAC_DCCSR(n) &= ~DMAC_DCCSR_TT )
-#define __dmac_channel_clear_address_error(n) \
- ( REG_DMAC_DCCSR(n) &= ~DMAC_DCCSR_AR )
-#define __dmac_channel_clear_count_terminated(n) \
- ( REG_DMAC_DCCSR((n)) &= ~DMAC_DCCSR_CT )
-#define __dmac_channel_clear_descriptor_invalid(n) \
- ( REG_DMAC_DCCSR((n)) &= ~DMAC_DCCSR_INV )
-
-#define __dmac_channel_set_single_mode(n) \
- ( REG_DMAC_DCMD((n)) &= ~DMAC_DCMD_TM )
-#define __dmac_channel_set_block_mode(n) \
- ( REG_DMAC_DCMD((n)) |= DMAC_DCMD_TM )
-
-#define __dmac_channel_set_transfer_unit_32bit(n) \
-do { \
- REG_DMAC_DCMD((n)) &= ~DMAC_DCMD_DS_MASK; \
- REG_DMAC_DCMD((n)) |= DMAC_DCMD_DS_32BIT; \
-} while (0)
-
-#define __dmac_channel_set_transfer_unit_16bit(n) \
-do { \
- REG_DMAC_DCMD((n)) &= ~DMAC_DCMD_DS_MASK; \
- REG_DMAC_DCMD((n)) |= DMAC_DCMD_DS_16BIT; \
-} while (0)
-
-#define __dmac_channel_set_transfer_unit_8bit(n) \
-do { \
- REG_DMAC_DCMD((n)) &= ~DMAC_DCMD_DS_MASK; \
- REG_DMAC_DCMD((n)) |= DMAC_DCMD_DS_8BIT; \
-} while (0)
-
-#define __dmac_channel_set_transfer_unit_16byte(n) \
-do { \
- REG_DMAC_DCMD((n)) &= ~DMAC_DCMD_DS_MASK; \
- REG_DMAC_DCMD((n)) |= DMAC_DCMD_DS_16BYTE; \
-} while (0)
-
-#define __dmac_channel_set_transfer_unit_32byte(n) \
-do { \
- REG_DMAC_DCMD((n)) &= ~DMAC_DCMD_DS_MASK; \
- REG_DMAC_DCMD((n)) |= DMAC_DCMD_DS_32BYTE; \
-} while (0)
-
-/* w=8,16,32 */
-#define __dmac_channel_set_dest_port_width(n,w) \
-do { \
- REG_DMAC_DCMD((n)) &= ~DMAC_DCMD_DWDH_MASK; \
- REG_DMAC_DCMD((n)) |= DMAC_DCMD_DWDH_##w; \
-} while (0)
-
-/* w=8,16,32 */
-#define __dmac_channel_set_src_port_width(n,w) \
-do { \
- REG_DMAC_DCMD((n)) &= ~DMAC_DCMD_SWDH_MASK; \
- REG_DMAC_DCMD((n)) |= DMAC_DCMD_SWDH_##w; \
-} while (0)
-
-/* v=0-15 */
-#define __dmac_channel_set_rdil(n,v) \
-do { \
- REG_DMAC_DCMD((n)) &= ~DMAC_DCMD_RDIL_MASK; \
- REG_DMAC_DCMD((n) |= ((v) << DMAC_DCMD_RDIL_BIT); \
-} while (0)
-
-#define __dmac_channel_dest_addr_fixed(n) \
- ( REG_DMAC_DCMD((n)) &= ~DMAC_DCMD_DAI )
-#define __dmac_channel_dest_addr_increment(n) \
- ( REG_DMAC_DCMD((n)) |= DMAC_DCMD_DAI )
-
-#define __dmac_channel_src_addr_fixed(n) \
- ( REG_DMAC_DCMD((n)) &= ~DMAC_DCMD_SAI )
-#define __dmac_channel_src_addr_increment(n) \
- ( REG_DMAC_DCMD((n)) |= DMAC_DCMD_SAI )
-
-#define __dmac_channel_set_doorbell(n) \
- ( REG_DMAC_DMADBSR = (1 << (n)) )
-
-#define __dmac_channel_irq_detected(n) ( REG_DMAC_DMAIPR & (1 << (n)) )
-#define __dmac_channel_ack_irq(n) ( REG_DMAC_DMAIPR &= ~(1 << (n)) )
-
-static __inline__ int __dmac_get_irq(void)
-{
- int i;
- for (i = 0; i < MAX_DMA_NUM; i++)
- if (__dmac_channel_irq_detected(i))
- return i;
- return -1;
-}
-
-
-/***************************************************************************
- * AIC (AC'97 & I2S Controller)
- ***************************************************************************/
-
-#define __aic_enable() ( REG_AIC_FR |= AIC_FR_ENB )
-#define __aic_disable() ( REG_AIC_FR &= ~AIC_FR_ENB )
-
-#define __aic_select_ac97() ( REG_AIC_FR &= ~AIC_FR_AUSEL )
-#define __aic_select_i2s() ( REG_AIC_FR |= AIC_FR_AUSEL )
-
-#define __i2s_as_master() ( REG_AIC_FR |= AIC_FR_BCKD | AIC_FR_SYNCD )
-#define __i2s_as_slave() ( REG_AIC_FR &= ~(AIC_FR_BCKD | AIC_FR_SYNCD) )
-#define __aic_reset_status() ( REG_AIC_FR & AIC_FR_RST )
-
-#define __aic_reset() \
-do { \
- REG_AIC_FR |= AIC_FR_RST; \
-} while(0)
-
-
-#define __aic_set_transmit_trigger(n) \
-do { \
- REG_AIC_FR &= ~AIC_FR_TFTH_MASK; \
- REG_AIC_FR |= ((n) << AIC_FR_TFTH_BIT); \
-} while(0)
-
-#define __aic_set_receive_trigger(n) \
-do { \
- REG_AIC_FR &= ~AIC_FR_RFTH_MASK; \
- REG_AIC_FR |= ((n) << AIC_FR_RFTH_BIT); \
-} while(0)
-
-#define __aic_enable_record() ( REG_AIC_CR |= AIC_CR_EREC )
-#define __aic_disable_record() ( REG_AIC_CR &= ~AIC_CR_EREC )
-#define __aic_enable_replay() ( REG_AIC_CR |= AIC_CR_ERPL )
-#define __aic_disable_replay() ( REG_AIC_CR &= ~AIC_CR_ERPL )
-#define __aic_enable_loopback() ( REG_AIC_CR |= AIC_CR_ENLBF )
-#define __aic_disable_loopback() ( REG_AIC_CR &= ~AIC_CR_ENLBF )
-
-#define __aic_flush_fifo() ( REG_AIC_CR |= AIC_CR_FLUSH )
-#define __aic_unflush_fifo() ( REG_AIC_CR &= ~AIC_CR_FLUSH )
-
-#define __aic_enable_transmit_intr() \
- ( REG_AIC_CR |= (AIC_CR_ETFS | AIC_CR_ETUR) )
-#define __aic_disable_transmit_intr() \
- ( REG_AIC_CR &= ~(AIC_CR_ETFS | AIC_CR_ETUR) )
-#define __aic_enable_receive_intr() \
- ( REG_AIC_CR |= (AIC_CR_ERFS | AIC_CR_EROR) )
-#define __aic_disable_receive_intr() \
- ( REG_AIC_CR &= ~(AIC_CR_ERFS | AIC_CR_EROR) )
-
-#define __aic_enable_transmit_dma() ( REG_AIC_CR |= AIC_CR_TDMS )
-#define __aic_disable_transmit_dma() ( REG_AIC_CR &= ~AIC_CR_TDMS )
-#define __aic_enable_receive_dma() ( REG_AIC_CR |= AIC_CR_RDMS )
-#define __aic_disable_receive_dma() ( REG_AIC_CR &= ~AIC_CR_RDMS )
-
-#define __aic_enable_mono2stereo() ( REG_AIC_CR |= AIC_CR_M2S )
-#define __aic_disable_mono2stereo() ( REG_AIC_CR &= ~AIC_CR_M2S )
-#define __aic_enable_byteswap() ( REG_AIC_CR |= AIC_CR_ENDSW )
-#define __aic_disable_byteswap() ( REG_AIC_CR &= ~AIC_CR_ENDSW )
-#define __aic_enable_unsignadj() ( REG_AIC_CR |= AIC_CR_AVSTSU )
-#define __aic_disable_unsignadj() ( REG_AIC_CR &= ~AIC_CR_AVSTSU )
-
-#define AC97_PCM_XS_L_FRONT AIC_ACCR1_XS_SLOT3
-#define AC97_PCM_XS_R_FRONT AIC_ACCR1_XS_SLOT4
-#define AC97_PCM_XS_CENTER AIC_ACCR1_XS_SLOT6
-#define AC97_PCM_XS_L_SURR AIC_ACCR1_XS_SLOT7
-#define AC97_PCM_XS_R_SURR AIC_ACCR1_XS_SLOT8
-#define AC97_PCM_XS_LFE AIC_ACCR1_XS_SLOT9
-
-#define AC97_PCM_RS_L_FRONT AIC_ACCR1_RS_SLOT3
-#define AC97_PCM_RS_R_FRONT AIC_ACCR1_RS_SLOT4
-#define AC97_PCM_RS_CENTER AIC_ACCR1_RS_SLOT6
-#define AC97_PCM_RS_L_SURR AIC_ACCR1_RS_SLOT7
-#define AC97_PCM_RS_R_SURR AIC_ACCR1_RS_SLOT8
-#define AC97_PCM_RS_LFE AIC_ACCR1_RS_SLOT9
-
-#define __ac97_set_xs_none() ( REG_AIC_ACCR1 &= ~AIC_ACCR1_XS_MASK )
-#define __ac97_set_xs_mono() \
-do { \
- REG_AIC_ACCR1 &= ~AIC_ACCR1_XS_MASK; \
- REG_AIC_ACCR1 |= AC97_PCM_XS_R_FRONT; \
-} while(0)
-#define __ac97_set_xs_stereo() \
-do { \
- REG_AIC_ACCR1 &= ~AIC_ACCR1_XS_MASK; \
- REG_AIC_ACCR1 |= AC97_PCM_XS_L_FRONT | AC97_PCM_XS_R_FRONT; \
-} while(0)
-
-/* In fact, only stereo is support now. */
-#define __ac97_set_rs_none() ( REG_AIC_ACCR1 &= ~AIC_ACCR1_RS_MASK )
-#define __ac97_set_rs_mono() \
-do { \
- REG_AIC_ACCR1 &= ~AIC_ACCR1_RS_MASK; \
- REG_AIC_ACCR1 |= AC97_PCM_RS_R_FRONT; \
-} while(0)
-#define __ac97_set_rs_stereo() \
-do { \
- REG_AIC_ACCR1 &= ~AIC_ACCR1_RS_MASK; \
- REG_AIC_ACCR1 |= AC97_PCM_RS_L_FRONT | AC97_PCM_RS_R_FRONT; \
-} while(0)
-
-#define __ac97_warm_reset_codec() \
- do { \
- REG_AIC_ACCR2 |= AIC_ACCR2_SA; \
- REG_AIC_ACCR2 |= AIC_ACCR2_SS; \
- udelay(2); \
- REG_AIC_ACCR2 &= ~AIC_ACCR2_SS; \
- REG_AIC_ACCR2 &= ~AIC_ACCR2_SA; \
- } while (0)
-
-#define __ac97_cold_reset_codec() \
- do { \
- REG_AIC_ACCR2 |= AIC_ACCR2_SR; \
- udelay(2); \
- REG_AIC_ACCR2 &= ~AIC_ACCR2_SR; \
- } while (0)
-
-/* n=8,16,18,20 */
-#define __ac97_set_iass(n) \
- ( REG_AIC_ACCR2 = (REG_AIC_ACCR2 & ~AIC_ACCR2_IASS_MASK) | AIC_ACCR2_IASS_##n##BIT )
-#define __ac97_set_oass(n) \
- ( REG_AIC_ACCR2 = (REG_AIC_ACCR2 & ~AIC_ACCR2_OASS_MASK) | AIC_ACCR2_OASS_##n##BIT )
-
-#define __i2s_select_i2s() ( REG_AIC_I2SCR &= ~AIC_I2SCR_AMSL )
-#define __i2s_select_msbjustified() ( REG_AIC_I2SCR |= AIC_I2SCR_AMSL )
-
-/* n=8,16,18,20,24 */
-/*#define __i2s_set_sample_size(n) \
- ( REG_AIC_I2SCR |= (REG_AIC_I2SCR & ~AIC_I2SCR_WL_MASK) | AIC_I2SCR_WL_##n##BIT )*/
-
-#define __i2s_set_oss_sample_size(n) \
- ( REG_AIC_CR = (REG_AIC_CR & ~AIC_CR_OSS_MASK) | AIC_CR_OSS_##n##BIT )
-#define __i2s_set_iss_sample_size(n) \
- ( REG_AIC_CR = (REG_AIC_CR & ~AIC_CR_ISS_MASK) | AIC_CR_ISS_##n##BIT )
-
-#define __i2s_stop_bitclk() ( REG_AIC_I2SCR |= AIC_I2SCR_STPBK )
-#define __i2s_start_bitclk() ( REG_AIC_I2SCR &= ~AIC_I2SCR_STPBK )
-
-#define __aic_transmit_request() ( REG_AIC_SR & AIC_SR_TFS )
-#define __aic_receive_request() ( REG_AIC_SR & AIC_SR_RFS )
-#define __aic_transmit_underrun() ( REG_AIC_SR & AIC_SR_TUR )
-#define __aic_receive_overrun() ( REG_AIC_SR & AIC_SR_ROR )
-
-#define __aic_clear_errors() ( REG_AIC_SR &= ~(AIC_SR_TUR | AIC_SR_ROR) )
-
-#define __aic_get_transmit_resident() \
- ( (REG_AIC_SR & AIC_SR_TFL_MASK) >> AIC_SR_TFL_BIT )
-#define __aic_get_receive_count() \
- ( (REG_AIC_SR & AIC_SR_RFL_MASK) >> AIC_SR_RFL_BIT )
-
-#define __ac97_command_transmitted() ( REG_AIC_ACSR & AIC_ACSR_CADT )
-#define __ac97_status_received() ( REG_AIC_ACSR & AIC_ACSR_SADR )
-#define __ac97_status_receive_timeout() ( REG_AIC_ACSR & AIC_ACSR_RSTO )
-#define __ac97_codec_is_low_power_mode() ( REG_AIC_ACSR & AIC_ACSR_CLPM )
-#define __ac97_codec_is_ready() ( REG_AIC_ACSR & AIC_ACSR_CRDY )
-#define __ac97_slot_error_detected() ( REG_AIC_ACSR & AIC_ACSR_SLTERR )
-#define __ac97_clear_slot_error() ( REG_AIC_ACSR &= ~AIC_ACSR_SLTERR )
-
-#define __i2s_is_busy() ( REG_AIC_I2SSR & AIC_I2SSR_BSY )
-
-#define CODEC_READ_CMD (1 << 19)
-#define CODEC_WRITE_CMD (0 << 19)
-#define CODEC_REG_INDEX_BIT 12
-#define CODEC_REG_INDEX_MASK (0x7f << CODEC_REG_INDEX_BIT) /* 18:12 */
-#define CODEC_REG_DATA_BIT 4
-#define CODEC_REG_DATA_MASK (0x0ffff << 4) /* 19:4 */
-
-#define __ac97_out_rcmd_addr(reg) \
-do { \
- REG_AIC_ACCAR = CODEC_READ_CMD | ((reg) << CODEC_REG_INDEX_BIT); \
-} while (0)
-
-#define __ac97_out_wcmd_addr(reg) \
-do { \
- REG_AIC_ACCAR = CODEC_WRITE_CMD | ((reg) << CODEC_REG_INDEX_BIT); \
-} while (0)
-
-#define __ac97_out_data(value) \
-do { \
- REG_AIC_ACCDR = ((value) << CODEC_REG_DATA_BIT); \
-} while (0)
-
-#define __ac97_in_data() \
- ( (REG_AIC_ACSDR & CODEC_REG_DATA_MASK) >> CODEC_REG_DATA_BIT )
-
-#define __ac97_in_status_addr() \
- ( (REG_AIC_ACSAR & CODEC_REG_INDEX_MASK) >> CODEC_REG_INDEX_BIT )
-
-#define __i2s_set_sample_rate(i2sclk, sync) \
- ( REG_AIC_I2SDIV = ((i2sclk) / (4*64)) / (sync) )
-
-#define __aic_write_tfifo(v) ( REG_AIC_DR = (v) )
-#define __aic_read_rfifo() ( REG_AIC_DR )
-
-#define __aic_internal_codec() ( REG_AIC_FR |= AIC_FR_ICDC )
-#define __aic_external_codec() ( REG_AIC_FR &= ~AIC_FR_ICDC )
-
-/* Define next ops for AC97 compatible */
-
-#define AC97_ACSR AIC_ACSR
-
-#define __ac97_enable() __aic_enable(); __aic_select_ac97()
-#define __ac97_disable() __aic_disable()
-#define __ac97_reset() __aic_reset()
-
-#define __ac97_set_transmit_trigger(n) __aic_set_transmit_trigger(n)
-#define __ac97_set_receive_trigger(n) __aic_set_receive_trigger(n)
-
-#define __ac97_enable_record() __aic_enable_record()
-#define __ac97_disable_record() __aic_disable_record()
-#define __ac97_enable_replay() __aic_enable_replay()
-#define __ac97_disable_replay() __aic_disable_replay()
-#define __ac97_enable_loopback() __aic_enable_loopback()
-#define __ac97_disable_loopback() __aic_disable_loopback()
-
-#define __ac97_enable_transmit_dma() __aic_enable_transmit_dma()
-#define __ac97_disable_transmit_dma() __aic_disable_transmit_dma()
-#define __ac97_enable_receive_dma() __aic_enable_receive_dma()
-#define __ac97_disable_receive_dma() __aic_disable_receive_dma()
-
-#define __ac97_transmit_request() __aic_transmit_request()
-#define __ac97_receive_request() __aic_receive_request()
-#define __ac97_transmit_underrun() __aic_transmit_underrun()
-#define __ac97_receive_overrun() __aic_receive_overrun()
-
-#define __ac97_clear_errors() __aic_clear_errors()
-
-#define __ac97_get_transmit_resident() __aic_get_transmit_resident()
-#define __ac97_get_receive_count() __aic_get_receive_count()
-
-#define __ac97_enable_transmit_intr() __aic_enable_transmit_intr()
-#define __ac97_disable_transmit_intr() __aic_disable_transmit_intr()
-#define __ac97_enable_receive_intr() __aic_enable_receive_intr()
-#define __ac97_disable_receive_intr() __aic_disable_receive_intr()
-
-#define __ac97_write_tfifo(v) __aic_write_tfifo(v)
-#define __ac97_read_rfifo() __aic_read_rfifo()
-
-/* Define next ops for I2S compatible */
-
-#define I2S_ACSR AIC_I2SSR
-
-#define __i2s_enable() __aic_enable(); __aic_select_i2s()
-#define __i2s_disable() __aic_disable()
-#define __i2s_reset() __aic_reset()
-
-#define __i2s_set_transmit_trigger(n) __aic_set_transmit_trigger(n)
-#define __i2s_set_receive_trigger(n) __aic_set_receive_trigger(n)
-
-#define __i2s_enable_record() __aic_enable_record()
-#define __i2s_disable_record() __aic_disable_record()
-#define __i2s_enable_replay() __aic_enable_replay()
-#define __i2s_disable_replay() __aic_disable_replay()
-#define __i2s_enable_loopback() __aic_enable_loopback()
-#define __i2s_disable_loopback() __aic_disable_loopback()
-
-#define __i2s_enable_transmit_dma() __aic_enable_transmit_dma()
-#define __i2s_disable_transmit_dma() __aic_disable_transmit_dma()
-#define __i2s_enable_receive_dma() __aic_enable_receive_dma()
-#define __i2s_disable_receive_dma() __aic_disable_receive_dma()
-
-#define __i2s_transmit_request() __aic_transmit_request()
-#define __i2s_receive_request() __aic_receive_request()
-#define __i2s_transmit_underrun() __aic_transmit_underrun()
-#define __i2s_receive_overrun() __aic_receive_overrun()
-
-#define __i2s_clear_errors() __aic_clear_errors()
-
-#define __i2s_get_transmit_resident() __aic_get_transmit_resident()
-#define __i2s_get_receive_count() __aic_get_receive_count()
-
-#define __i2s_enable_transmit_intr() __aic_enable_transmit_intr()
-#define __i2s_disable_transmit_intr() __aic_disable_transmit_intr()
-#define __i2s_enable_receive_intr() __aic_enable_receive_intr()
-#define __i2s_disable_receive_intr() __aic_disable_receive_intr()
-
-#define __i2s_write_tfifo(v) __aic_write_tfifo(v)
-#define __i2s_read_rfifo() __aic_read_rfifo()
-
-#define __i2s_reset_codec() \
- do { \
- } while (0)
-
-
-/***************************************************************************
- * ICDC
- ***************************************************************************/
-#define __i2s_internal_codec() __aic_internal_codec()
-#define __i2s_external_codec() __aic_external_codec()
-
-/***************************************************************************
- * INTC
- ***************************************************************************/
-#define __intc_unmask_irq(n) ( REG_INTC_IMCR = (1 << (n)) )
-#define __intc_mask_irq(n) ( REG_INTC_IMSR = (1 << (n)) )
-#define __intc_ack_irq(n) ( REG_INTC_IPR = (1 << (n)) )
-
-
-/***************************************************************************
- * I2C
- ***************************************************************************/
-
-#define __i2c_enable() ( REG_I2C_CR |= I2C_CR_I2CE )
-#define __i2c_disable() ( REG_I2C_CR &= ~I2C_CR_I2CE )
-
-#define __i2c_send_start() ( REG_I2C_CR |= I2C_CR_STA )
-#define __i2c_send_stop() ( REG_I2C_CR |= I2C_CR_STO )
-#define __i2c_send_ack() ( REG_I2C_CR &= ~I2C_CR_AC )
-#define __i2c_send_nack() ( REG_I2C_CR |= I2C_CR_AC )
-
-#define __i2c_set_drf() ( REG_I2C_SR |= I2C_SR_DRF )
-#define __i2c_clear_drf() ( REG_I2C_SR &= ~I2C_SR_DRF )
-#define __i2c_check_drf() ( REG_I2C_SR & I2C_SR_DRF )
-
-#define __i2c_received_ack() ( !(REG_I2C_SR & I2C_SR_ACKF) )
-#define __i2c_is_busy() ( REG_I2C_SR & I2C_SR_BUSY )
-#define __i2c_transmit_ended() ( REG_I2C_SR & I2C_SR_TEND )
-
-#define __i2c_set_clk(dev_clk, i2c_clk) \
- ( REG_I2C_GR = (dev_clk) / (16*(i2c_clk)) - 1 )
-
-#define __i2c_read() ( REG_I2C_DR )
-#define __i2c_write(val) ( REG_I2C_DR = (val) )
-
-
-/***************************************************************************
- * MSC
- ***************************************************************************/
-
-#define __msc_start_op() \
- ( REG_MSC_STRPCL = MSC_STRPCL_START_OP | MSC_STRPCL_CLOCK_CONTROL_START )
-
-#define __msc_set_resto(to) ( REG_MSC_RESTO = to )
-#define __msc_set_rdto(to) ( REG_MSC_RDTO = to )
-#define __msc_set_cmd(cmd) ( REG_MSC_CMD = cmd )
-#define __msc_set_arg(arg) ( REG_MSC_ARG = arg )
-#define __msc_set_nob(nob) ( REG_MSC_NOB = nob )
-#define __msc_get_nob() ( REG_MSC_NOB )
-#define __msc_set_blklen(len) ( REG_MSC_BLKLEN = len )
-#define __msc_set_cmdat(cmdat) ( REG_MSC_CMDAT = cmdat )
-#define __msc_set_cmdat_ioabort() ( REG_MSC_CMDAT |= MSC_CMDAT_IO_ABORT )
-#define __msc_clear_cmdat_ioabort() ( REG_MSC_CMDAT &= ~MSC_CMDAT_IO_ABORT )
-
-#define __msc_set_cmdat_bus_width1() \
-do { \
- REG_MSC_CMDAT &= ~MSC_CMDAT_BUS_WIDTH_MASK; \
- REG_MSC_CMDAT |= MSC_CMDAT_BUS_WIDTH_1BIT; \
-} while(0)
-
-#define __msc_set_cmdat_bus_width4() \
-do { \
- REG_MSC_CMDAT &= ~MSC_CMDAT_BUS_WIDTH_MASK; \
- REG_MSC_CMDAT |= MSC_CMDAT_BUS_WIDTH_4BIT; \
-} while(0)
-
-#define __msc_set_cmdat_dma_en() ( REG_MSC_CMDAT |= MSC_CMDAT_DMA_EN )
-#define __msc_set_cmdat_init() ( REG_MSC_CMDAT |= MSC_CMDAT_INIT )
-#define __msc_set_cmdat_busy() ( REG_MSC_CMDAT |= MSC_CMDAT_BUSY )
-#define __msc_set_cmdat_stream() ( REG_MSC_CMDAT |= MSC_CMDAT_STREAM_BLOCK )
-#define __msc_set_cmdat_block() ( REG_MSC_CMDAT &= ~MSC_CMDAT_STREAM_BLOCK )
-#define __msc_set_cmdat_read() ( REG_MSC_CMDAT &= ~MSC_CMDAT_WRITE_READ )
-#define __msc_set_cmdat_write() ( REG_MSC_CMDAT |= MSC_CMDAT_WRITE_READ )
-#define __msc_set_cmdat_data_en() ( REG_MSC_CMDAT |= MSC_CMDAT_DATA_EN )
-
-/* r is MSC_CMDAT_RESPONSE_FORMAT_Rx or MSC_CMDAT_RESPONSE_FORMAT_NONE */
-#define __msc_set_cmdat_res_format(r) \
-do { \
- REG_MSC_CMDAT &= ~MSC_CMDAT_RESPONSE_FORMAT_MASK; \
- REG_MSC_CMDAT |= (r); \
-} while(0)
-
-#define __msc_clear_cmdat() \
- REG_MSC_CMDAT &= ~( MSC_CMDAT_IO_ABORT | MSC_CMDAT_DMA_EN | MSC_CMDAT_INIT| \
- MSC_CMDAT_BUSY | MSC_CMDAT_STREAM_BLOCK | MSC_CMDAT_WRITE_READ | \
- MSC_CMDAT_DATA_EN | MSC_CMDAT_RESPONSE_FORMAT_MASK )
-
-#define __msc_get_imask() ( REG_MSC_IMASK )
-#define __msc_mask_all_intrs() ( REG_MSC_IMASK = 0xff )
-#define __msc_unmask_all_intrs() ( REG_MSC_IMASK = 0x00 )
-#define __msc_mask_rd() ( REG_MSC_IMASK |= MSC_IMASK_RXFIFO_RD_REQ )
-#define __msc_unmask_rd() ( REG_MSC_IMASK &= ~MSC_IMASK_RXFIFO_RD_REQ )
-#define __msc_mask_wr() ( REG_MSC_IMASK |= MSC_IMASK_TXFIFO_WR_REQ )
-#define __msc_unmask_wr() ( REG_MSC_IMASK &= ~MSC_IMASK_TXFIFO_WR_REQ )
-#define __msc_mask_endcmdres() ( REG_MSC_IMASK |= MSC_IMASK_END_CMD_RES )
-#define __msc_unmask_endcmdres() ( REG_MSC_IMASK &= ~MSC_IMASK_END_CMD_RES )
-#define __msc_mask_datatrandone() ( REG_MSC_IMASK |= MSC_IMASK_DATA_TRAN_DONE )
-#define __msc_unmask_datatrandone() ( REG_MSC_IMASK &= ~MSC_IMASK_DATA_TRAN_DONE )
-#define __msc_mask_prgdone() ( REG_MSC_IMASK |= MSC_IMASK_PRG_DONE )
-#define __msc_unmask_prgdone() ( REG_MSC_IMASK &= ~MSC_IMASK_PRG_DONE )
-
-/* n=0,1,2,3,4,5,6,7 */
-#define __msc_set_clkrt(n) \
-do { \
- REG_MSC_CLKRT = n; \
-} while(0)
-
-#define __msc_get_ireg() ( REG_MSC_IREG )
-#define __msc_ireg_rd() ( REG_MSC_IREG & MSC_IREG_RXFIFO_RD_REQ )
-#define __msc_ireg_wr() ( REG_MSC_IREG & MSC_IREG_TXFIFO_WR_REQ )
-#define __msc_ireg_end_cmd_res() ( REG_MSC_IREG & MSC_IREG_END_CMD_RES )
-#define __msc_ireg_data_tran_done() ( REG_MSC_IREG & MSC_IREG_DATA_TRAN_DONE )
-#define __msc_ireg_prg_done() ( REG_MSC_IREG & MSC_IREG_PRG_DONE )
-#define __msc_ireg_clear_end_cmd_res() ( REG_MSC_IREG = MSC_IREG_END_CMD_RES )
-#define __msc_ireg_clear_data_tran_done() ( REG_MSC_IREG = MSC_IREG_DATA_TRAN_DONE )
-#define __msc_ireg_clear_prg_done() ( REG_MSC_IREG = MSC_IREG_PRG_DONE )
-
-#define __msc_get_stat() ( REG_MSC_STAT )
-#define __msc_stat_not_end_cmd_res() ( (REG_MSC_STAT & MSC_STAT_END_CMD_RES) == 0)
-#define __msc_stat_crc_err() \
- ( REG_MSC_STAT & (MSC_STAT_CRC_RES_ERR | MSC_STAT_CRC_READ_ERROR | MSC_STAT_CRC_WRITE_ERROR_YES) )
-#define __msc_stat_res_crc_err() ( REG_MSC_STAT & MSC_STAT_CRC_RES_ERR )
-#define __msc_stat_rd_crc_err() ( REG_MSC_STAT & MSC_STAT_CRC_READ_ERROR )
-#define __msc_stat_wr_crc_err() ( REG_MSC_STAT & MSC_STAT_CRC_WRITE_ERROR_YES )
-#define __msc_stat_resto_err() ( REG_MSC_STAT & MSC_STAT_TIME_OUT_RES )
-#define __msc_stat_rdto_err() ( REG_MSC_STAT & MSC_STAT_TIME_OUT_READ )
-
-#define __msc_rd_resfifo() ( REG_MSC_RES )
-#define __msc_rd_rxfifo() ( REG_MSC_RXFIFO )
-#define __msc_wr_txfifo(v) ( REG_MSC_TXFIFO = v )
-
-#define __msc_reset() \
-do { \
- REG_MSC_STRPCL = MSC_STRPCL_RESET; \
- while (REG_MSC_STAT & MSC_STAT_IS_RESETTING); \
-} while (0)
-
-#define __msc_start_clk() \
-do { \
- REG_MSC_STRPCL = MSC_STRPCL_CLOCK_CONTROL_START; \
-} while (0)
-
-#define __msc_stop_clk() \
-do { \
- REG_MSC_STRPCL = MSC_STRPCL_CLOCK_CONTROL_STOP; \
-} while (0)
-
-#define MMC_CLK 19169200
-#define SD_CLK 24576000
-
-/* msc_clk should little than pclk and little than clk retrieve from card */
-#define __msc_calc_clk_divisor(type,dev_clk,msc_clk,lv) \
-do { \
- unsigned int rate, pclk, i; \
- pclk = dev_clk; \
- rate = type?SD_CLK:MMC_CLK; \
- if (msc_clk && msc_clk < pclk) \
- pclk = msc_clk; \
- i = 0; \
- while (pclk < rate) \
- { \
- i ++; \
- rate >>= 1; \
- } \
- lv = i; \
-} while(0)
-
-/* divide rate to little than or equal to 400kHz */
-#define __msc_calc_slow_clk_divisor(type, lv) \
-do { \
- unsigned int rate, i; \
- rate = (type?SD_CLK:MMC_CLK)/1000/400; \
- i = 0; \
- while (rate > 0) \
- { \
- rate >>= 1; \
- i ++; \
- } \
- lv = i; \
-} while(0)
-
-
-/***************************************************************************
- * SSI
- ***************************************************************************/
-
-#define __ssi_enable() ( REG_SSI_CR0 |= SSI_CR0_SSIE )
-#define __ssi_disable() ( REG_SSI_CR0 &= ~SSI_CR0_SSIE )
-#define __ssi_select_ce() ( REG_SSI_CR0 &= ~SSI_CR0_FSEL )
-
-#define __ssi_normal_mode() ( REG_SSI_ITR &= ~SSI_ITR_IVLTM_MASK )
-
-#define __ssi_select_ce2() \
-do { \
- REG_SSI_CR0 |= SSI_CR0_FSEL; \
- REG_SSI_CR1 &= ~SSI_CR1_MULTS; \
-} while (0)
-
-#define __ssi_select_gpc() \
-do { \
- REG_SSI_CR0 &= ~SSI_CR0_FSEL; \
- REG_SSI_CR1 |= SSI_CR1_MULTS; \
-} while (0)
-
-#define __ssi_enable_tx_intr() \
- ( REG_SSI_CR0 |= SSI_CR0_TIE | SSI_CR0_TEIE )
-
-#define __ssi_disable_tx_intr() \
- ( REG_SSI_CR0 &= ~(SSI_CR0_TIE | SSI_CR0_TEIE) )
-
-#define __ssi_enable_rx_intr() \
- ( REG_SSI_CR0 |= SSI_CR0_RIE | SSI_CR0_REIE )
-
-#define __ssi_disable_rx_intr() \
- ( REG_SSI_CR0 &= ~(SSI_CR0_RIE | SSI_CR0_REIE) )
-
-#define __ssi_enable_loopback() ( REG_SSI_CR0 |= SSI_CR0_LOOP )
-#define __ssi_disable_loopback() ( REG_SSI_CR0 &= ~SSI_CR0_LOOP )
-
-#define __ssi_enable_receive() ( REG_SSI_CR0 &= ~SSI_CR0_DISREV )
-#define __ssi_disable_receive() ( REG_SSI_CR0 |= SSI_CR0_DISREV )
-
-#define __ssi_finish_receive() \
- ( REG_SSI_CR0 |= (SSI_CR0_RFINE | SSI_CR0_RFINC) )
-
-#define __ssi_disable_recvfinish() \
- ( REG_SSI_CR0 &= ~(SSI_CR0_RFINE | SSI_CR0_RFINC) )
-
-#define __ssi_flush_txfifo() ( REG_SSI_CR0 |= SSI_CR0_TFLUSH )
-#define __ssi_flush_rxfifo() ( REG_SSI_CR0 |= SSI_CR0_RFLUSH )
-
-#define __ssi_flush_fifo() \
- ( REG_SSI_CR0 |= SSI_CR0_TFLUSH | SSI_CR0_RFLUSH )
-
-#define __ssi_finish_transmit() ( REG_SSI_CR1 &= ~SSI_CR1_UNFIN )
-
-#define __ssi_spi_format() \
-do { \
- REG_SSI_CR1 &= ~SSI_CR1_FMAT_MASK; \
- REG_SSI_CR1 |= SSI_CR1_FMAT_SPI; \
- REG_SSI_CR1 &= ~(SSI_CR1_TFVCK_MASK|SSI_CR1_TCKFI_MASK);\
- REG_SSI_CR1 |= (SSI_CR1_TFVCK_1 | SSI_CR1_TCKFI_1); \
-} while (0)
-
-/* TI's SSP format, must clear SSI_CR1.UNFIN */
-#define __ssi_ssp_format() \
-do { \
- REG_SSI_CR1 &= ~(SSI_CR1_FMAT_MASK | SSI_CR1_UNFIN); \
- REG_SSI_CR1 |= SSI_CR1_FMAT_SSP; \
-} while (0)
-
-/* National's Microwire format, must clear SSI_CR0.RFINE, and set max delay */
-#define __ssi_microwire_format() \
-do { \
- REG_SSI_CR1 &= ~SSI_CR1_FMAT_MASK; \
- REG_SSI_CR1 |= SSI_CR1_FMAT_MW1; \
- REG_SSI_CR1 &= ~(SSI_CR1_TFVCK_MASK|SSI_CR1_TCKFI_MASK);\
- REG_SSI_CR1 |= (SSI_CR1_TFVCK_3 | SSI_CR1_TCKFI_3); \
- REG_SSI_CR0 &= ~SSI_CR0_RFINE; \
-} while (0)
-
-/* CE# level (FRMHL), CE# in interval time (ITFRM),
- clock phase and polarity (PHA POL),
- interval time (SSIITR), interval characters/frame (SSIICR) */
-
- /* frmhl,endian,mcom,flen,pha,pol MASK */
-#define SSICR1_MISC_MASK \
- ( SSI_CR1_FRMHL_MASK | SSI_CR1_LFST | SSI_CR1_MCOM_MASK \
- | SSI_CR1_FLEN_MASK | SSI_CR1_PHA | SSI_CR1_POL ) \
-
-#define __ssi_spi_set_misc(frmhl,endian,flen,mcom,pha,pol) \
-do { \
- REG_SSI_CR1 &= ~SSICR1_MISC_MASK; \
- REG_SSI_CR1 |= ((frmhl) << 30) | ((endian) << 25) | \
- (((mcom) - 1) << 12) | (((flen) - 2) << 4) | \
- ((pha) << 1) | (pol); \
-} while(0)
-
-/* Transfer with MSB or LSB first */
-#define __ssi_set_msb() ( REG_SSI_CR1 &= ~SSI_CR1_LFST )
-#define __ssi_set_lsb() ( REG_SSI_CR1 |= SSI_CR1_LFST )
-
-#define __ssi_set_frame_length(n) \
- REG_SSI_CR1 = (REG_SSI_CR1 & ~SSI_CR1_FLEN_MASK) | (((n) - 2) << 4)
-
-/* n = 1 - 16 */
-#define __ssi_set_microwire_command_length(n) \
- ( REG_SSI_CR1 = ((REG_SSI_CR1 & ~SSI_CR1_MCOM_MASK) | SSI_CR1_MCOM_##n##BIT) )
-
-/* Set the clock phase for SPI */
-#define __ssi_set_spi_clock_phase(n) \
- ( REG_SSI_CR1 = ((REG_SSI_CR1 & ~SSI_CR1_PHA) | (n&0x1)) )
-
-/* Set the clock polarity for SPI */
-#define __ssi_set_spi_clock_polarity(n) \
- ( REG_SSI_CR1 = ((REG_SSI_CR1 & ~SSI_CR1_POL) | (n&0x1)) )
-
-/* n = ix8 */
-#define __ssi_set_tx_trigger(n) \
-do { \
- REG_SSI_CR1 &= ~SSI_CR1_TTRG_MASK; \
- REG_SSI_CR1 |= SSI_CR1_TTRG_##n; \
-} while (0)
-
-/* n = ix8 */
-#define __ssi_set_rx_trigger(n) \
-do { \
- REG_SSI_CR1 &= ~SSI_CR1_RTRG_MASK; \
- REG_SSI_CR1 |= SSI_CR1_RTRG_##n; \
-} while (0)
-
-#define __ssi_get_txfifo_count() \
- ( (REG_SSI_SR & SSI_SR_TFIFONUM_MASK) >> SSI_SR_TFIFONUM_BIT )
-
-#define __ssi_get_rxfifo_count() \
- ( (REG_SSI_SR & SSI_SR_RFIFONUM_MASK) >> SSI_SR_RFIFONUM_BIT )
-
-#define __ssi_clear_errors() \
- ( REG_SSI_SR &= ~(SSI_SR_UNDR | SSI_SR_OVER) )
-
-#define __ssi_transfer_end() ( REG_SSI_SR & SSI_SR_END )
-#define __ssi_is_busy() ( REG_SSI_SR & SSI_SR_BUSY )
-
-#define __ssi_txfifo_full() ( REG_SSI_SR & SSI_SR_TFF )
-#define __ssi_rxfifo_empty() ( REG_SSI_SR & SSI_SR_RFE )
-#define __ssi_rxfifo_noempty() ( REG_SSI_SR & SSI_SR_RFHF )
-
-#define __ssi_set_clk(dev_clk, ssi_clk) \
- ( REG_SSI_GR = (dev_clk) / (2*(ssi_clk)) - 1 )
-
-#define __ssi_receive_data() REG_SSI_DR
-#define __ssi_transmit_data(v) ( REG_SSI_DR = (v) )
-
-
-/***************************************************************************
- * CIM
- ***************************************************************************/
-
-#define __cim_enable() ( REG_CIM_CTRL |= CIM_CTRL_ENA )
-#define __cim_disable() ( REG_CIM_CTRL &= ~CIM_CTRL_ENA )
-
-#define __cim_input_data_inverse() ( REG_CIM_CFG |= CIM_CFG_INV_DAT )
-#define __cim_input_data_normal() ( REG_CIM_CFG &= ~CIM_CFG_INV_DAT )
-
-#define __cim_vsync_active_low() ( REG_CIM_CFG |= CIM_CFG_VSP )
-#define __cim_vsync_active_high() ( REG_CIM_CFG &= ~CIM_CFG_VSP )
-
-#define __cim_hsync_active_low() ( REG_CIM_CFG |= CIM_CFG_HSP )
-#define __cim_hsync_active_high() ( REG_CIM_CFG &= ~CIM_CFG_HSP )
-
-#define __cim_sample_data_at_pclk_falling_edge() \
- ( REG_CIM_CFG |= CIM_CFG_PCP )
-#define __cim_sample_data_at_pclk_rising_edge() \
- ( REG_CIM_CFG &= ~CIM_CFG_PCP )
-
-#define __cim_enable_dummy_zero() ( REG_CIM_CFG |= CIM_CFG_DUMMY_ZERO )
-#define __cim_disable_dummy_zero() ( REG_CIM_CFG &= ~CIM_CFG_DUMMY_ZERO )
-
-#define __cim_select_external_vsync() ( REG_CIM_CFG |= CIM_CFG_EXT_VSYNC )
-#define __cim_select_internal_vsync() ( REG_CIM_CFG &= ~CIM_CFG_EXT_VSYNC )
-
-/* n=0-7 */
-#define __cim_set_data_packing_mode(n) \
-do { \
- REG_CIM_CFG &= ~CIM_CFG_PACK_MASK; \
- REG_CIM_CFG |= (CIM_CFG_PACK_##n); \
-} while (0)
-
-#define __cim_enable_ccir656_progressive_mode() \
-do { \
- REG_CIM_CFG &= ~CIM_CFG_DSM_MASK; \
- REG_CIM_CFG |= CIM_CFG_DSM_CPM; \
-} while (0)
-
-#define __cim_enable_ccir656_interlace_mode() \
-do { \
- REG_CIM_CFG &= ~CIM_CFG_DSM_MASK; \
- REG_CIM_CFG |= CIM_CFG_DSM_CIM; \
-} while (0)
-
-#define __cim_enable_gated_clock_mode() \
-do { \
- REG_CIM_CFG &= ~CIM_CFG_DSM_MASK; \
- REG_CIM_CFG |= CIM_CFG_DSM_GCM; \
-} while (0)
-
-#define __cim_enable_nongated_clock_mode() \
-do { \
- REG_CIM_CFG &= ~CIM_CFG_DSM_MASK; \
- REG_CIM_CFG |= CIM_CFG_DSM_NGCM; \
-} while (0)
-
-/* sclk:system bus clock
- * mclk: CIM master clock
- */
-#define __cim_set_master_clk(sclk, mclk) \
-do { \
- REG_CIM_CTRL &= ~CIM_CTRL_MCLKDIV_MASK; \
- REG_CIM_CTRL |= (((sclk)/(mclk) - 1) << CIM_CTRL_MCLKDIV_BIT); \
-} while (0)
-
-#define __cim_enable_sof_intr() \
- ( REG_CIM_CTRL |= CIM_CTRL_DMA_SOFM )
-#define __cim_disable_sof_intr() \
- ( REG_CIM_CTRL &= ~CIM_CTRL_DMA_SOFM )
-
-#define __cim_enable_eof_intr() \
- ( REG_CIM_CTRL |= CIM_CTRL_DMA_EOFM )
-#define __cim_disable_eof_intr() \
- ( REG_CIM_CTRL &= ~CIM_CTRL_DMA_EOFM )
-
-#define __cim_enable_stop_intr() \
- ( REG_CIM_CTRL |= CIM_CTRL_DMA_STOPM )
-#define __cim_disable_stop_intr() \
- ( REG_CIM_CTRL &= ~CIM_CTRL_DMA_STOPM )
-
-#define __cim_enable_trig_intr() \
- ( REG_CIM_CTRL |= CIM_CTRL_RXF_TRIGM )
-#define __cim_disable_trig_intr() \
- ( REG_CIM_CTRL &= ~CIM_CTRL_RXF_TRIGM )
-
-#define __cim_enable_rxfifo_overflow_intr() \
- ( REG_CIM_CTRL |= CIM_CTRL_RXF_OFM )
-#define __cim_disable_rxfifo_overflow_intr() \
- ( REG_CIM_CTRL &= ~CIM_CTRL_RXF_OFM )
-
-/* n=1-16 */
-#define __cim_set_frame_rate(n) \
-do { \
- REG_CIM_CTRL &= ~CIM_CTRL_FRC_MASK; \
- REG_CIM_CTRL |= CIM_CTRL_FRC_##n; \
-} while (0)
-
-#define __cim_enable_dma() ( REG_CIM_CTRL |= CIM_CTRL_DMA_EN )
-#define __cim_disable_dma() ( REG_CIM_CTRL &= ~CIM_CTRL_DMA_EN )
-
-#define __cim_reset_rxfifo() ( REG_CIM_CTRL |= CIM_CTRL_RXF_RST )
-#define __cim_unreset_rxfifo() ( REG_CIM_CTRL &= ~CIM_CTRL_RXF_RST )
-
-/* n=4,8,12,16,20,24,28,32 */
-#define __cim_set_rxfifo_trigger(n) \
-do { \
- REG_CIM_CTRL &= ~CIM_CTRL_RXF_TRIG_MASK; \
- REG_CIM_CTRL |= CIM_CTRL_RXF_TRIG_##n; \
-} while (0)
-
-#define __cim_clear_state() ( REG_CIM_STATE = 0 )
-
-#define __cim_disable_done() ( REG_CIM_STATE & CIM_STATE_VDD )
-#define __cim_rxfifo_empty() ( REG_CIM_STATE & CIM_STATE_RXF_EMPTY )
-#define __cim_rxfifo_reach_trigger() ( REG_CIM_STATE & CIM_STATE_RXF_TRIG )
-#define __cim_rxfifo_overflow() ( REG_CIM_STATE & CIM_STATE_RXF_OF )
-#define __cim_clear_rxfifo_overflow() ( REG_CIM_STATE &= ~CIM_STATE_RXF_OF )
-#define __cim_dma_stop() ( REG_CIM_STATE & CIM_STATE_DMA_STOP )
-#define __cim_dma_eof() ( REG_CIM_STATE & CIM_STATE_DMA_EOF )
-#define __cim_dma_sof() ( REG_CIM_STATE & CIM_STATE_DMA_SOF )
-
-#define __cim_get_iid() ( REG_CIM_IID )
-#define __cim_get_image_data() ( REG_CIM_RXFIFO )
-#define __cim_get_dam_cmd() ( REG_CIM_CMD )
-
-#define __cim_set_da(a) ( REG_CIM_DA = (a) )
-
-/***************************************************************************
- * LCD
- ***************************************************************************/
-#define __lcd_as_smart_lcd() ( REG_LCD_CFG |= (1<<LCD_CFG_LCDPIN_BIT) )
-#define __lcd_as_general_lcd() ( REG_LCD_CFG &= ~(1<<LCD_CFG_LCDPIN_BIT) )
-
-#define __lcd_set_dis() ( REG_LCD_CTRL |= LCD_CTRL_DIS )
-#define __lcd_clr_dis() ( REG_LCD_CTRL &= ~LCD_CTRL_DIS )
-
-#define __lcd_set_ena() ( REG_LCD_CTRL |= LCD_CTRL_ENA )
-#define __lcd_clr_ena() ( REG_LCD_CTRL &= ~LCD_CTRL_ENA )
-
-/* n=1,2,4,8,16 */
-#define __lcd_set_bpp(n) \
- ( REG_LCD_CTRL = (REG_LCD_CTRL & ~LCD_CTRL_BPP_MASK) | LCD_CTRL_BPP_##n )
-
-/* n=4,8,16 */
-#define __lcd_set_burst_length(n) \
-do { \
- REG_LCD_CTRL &= ~LCD_CTRL_BST_MASK; \
- REG_LCD_CTRL |= LCD_CTRL_BST_n##; \
-} while (0)
-
-#define __lcd_select_rgb565() ( REG_LCD_CTRL &= ~LCD_CTRL_RGB555 )
-#define __lcd_select_rgb555() ( REG_LCD_CTRL |= LCD_CTRL_RGB555 )
-
-#define __lcd_set_ofup() ( REG_LCD_CTRL |= LCD_CTRL_OFUP )
-#define __lcd_clr_ofup() ( REG_LCD_CTRL &= ~LCD_CTRL_OFUP )
-
-/* n=2,4,16 */
-#define __lcd_set_stn_frc(n) \
-do { \
- REG_LCD_CTRL &= ~LCD_CTRL_FRC_MASK; \
- REG_LCD_CTRL |= LCD_CTRL_FRC_n##; \
-} while (0)
-
-
-#define __lcd_pixel_endian_little() ( REG_LCD_CTRL |= LCD_CTRL_PEDN )
-#define __lcd_pixel_endian_big() ( REG_LCD_CTRL &= ~LCD_CTRL_PEDN )
-
-#define __lcd_reverse_byte_endian() ( REG_LCD_CTRL |= LCD_CTRL_BEDN )
-#define __lcd_normal_byte_endian() ( REG_LCD_CTRL &= ~LCD_CTRL_BEDN )
-
-#define __lcd_enable_eof_intr() ( REG_LCD_CTRL |= LCD_CTRL_EOFM )
-#define __lcd_disable_eof_intr() ( REG_LCD_CTRL &= ~LCD_CTRL_EOFM )
-
-#define __lcd_enable_sof_intr() ( REG_LCD_CTRL |= LCD_CTRL_SOFM )
-#define __lcd_disable_sof_intr() ( REG_LCD_CTRL &= ~LCD_CTRL_SOFM )
-
-#define __lcd_enable_ofu_intr() ( REG_LCD_CTRL |= LCD_CTRL_OFUM )
-#define __lcd_disable_ofu_intr() ( REG_LCD_CTRL &= ~LCD_CTRL_OFUM )
-
-#define __lcd_enable_ifu0_intr() ( REG_LCD_CTRL |= LCD_CTRL_IFUM0 )
-#define __lcd_disable_ifu0_intr() ( REG_LCD_CTRL &= ~LCD_CTRL_IFUM0 )
-
-#define __lcd_enable_ifu1_intr() ( REG_LCD_CTRL |= LCD_CTRL_IFUM1 )
-#define __lcd_disable_ifu1_intr() ( REG_LCD_CTRL &= ~LCD_CTRL_IFUM1 )
-
-#define __lcd_enable_ldd_intr() ( REG_LCD_CTRL |= LCD_CTRL_LDDM )
-#define __lcd_disable_ldd_intr() ( REG_LCD_CTRL &= ~LCD_CTRL_LDDM )
-
-#define __lcd_enable_qd_intr() ( REG_LCD_CTRL |= LCD_CTRL_QDM )
-#define __lcd_disable_qd_intr() ( REG_LCD_CTRL &= ~LCD_CTRL_QDM )
-
-
-/* LCD status register indication */
-
-#define __lcd_quick_disable_done() ( REG_LCD_STATE & LCD_STATE_QD )
-#define __lcd_disable_done() ( REG_LCD_STATE & LCD_STATE_LDD )
-#define __lcd_infifo0_underrun() ( REG_LCD_STATE & LCD_STATE_IFU0 )
-#define __lcd_infifo1_underrun() ( REG_LCD_STATE & LCD_STATE_IFU1 )
-#define __lcd_outfifo_underrun() ( REG_LCD_STATE & LCD_STATE_OFU )
-#define __lcd_start_of_frame() ( REG_LCD_STATE & LCD_STATE_SOF )
-#define __lcd_end_of_frame() ( REG_LCD_STATE & LCD_STATE_EOF )
-
-#define __lcd_clr_outfifounderrun() ( REG_LCD_STATE &= ~LCD_STATE_OFU )
-#define __lcd_clr_sof() ( REG_LCD_STATE &= ~LCD_STATE_SOF )
-#define __lcd_clr_eof() ( REG_LCD_STATE &= ~LCD_STATE_EOF )
-
-#define __lcd_panel_white() ( REG_LCD_CFG |= LCD_CFG_WHITE )
-#define __lcd_panel_black() ( REG_LCD_CFG &= ~LCD_CFG_WHITE )
-
-/* n=1,2,4,8 for single mono-STN
- * n=4,8 for dual mono-STN
- */
-#define __lcd_set_panel_datawidth(n) \
-do { \
- REG_LCD_CFG &= ~LCD_CFG_PDW_MASK; \
- REG_LCD_CFG |= LCD_CFG_PDW_n##; \
-} while (0)
-
-/* m=LCD_CFG_MODE_GENERUIC_TFT_xxx */
-#define __lcd_set_panel_mode(m) \
-do { \
- REG_LCD_CFG &= ~LCD_CFG_MODE_MASK; \
- REG_LCD_CFG |= (m); \
-} while(0)
-
-/* n = 0-255 */
-#define __lcd_disable_ac_bias() ( REG_LCD_IO = 0xff )
-#define __lcd_set_ac_bias(n) \
-do { \
- REG_LCD_IO &= ~LCD_IO_ACB_MASK; \
- REG_LCD_IO |= ((n) << LCD_IO_ACB_BIT); \
-} while(0)
-
-#define __lcd_io_set_dir() ( REG_LCD_IO |= LCD_IO_DIR )
-#define __lcd_io_clr_dir() ( REG_LCD_IO &= ~LCD_IO_DIR )
-
-#define __lcd_io_set_dep() ( REG_LCD_IO |= LCD_IO_DEP )
-#define __lcd_io_clr_dep() ( REG_LCD_IO &= ~LCD_IO_DEP )
-
-#define __lcd_io_set_vsp() ( REG_LCD_IO |= LCD_IO_VSP )
-#define __lcd_io_clr_vsp() ( REG_LCD_IO &= ~LCD_IO_VSP )
-
-#define __lcd_io_set_hsp() ( REG_LCD_IO |= LCD_IO_HSP )
-#define __lcd_io_clr_hsp() ( REG_LCD_IO &= ~LCD_IO_HSP )
-
-#define __lcd_io_set_pcp() ( REG_LCD_IO |= LCD_IO_PCP )
-#define __lcd_io_clr_pcp() ( REG_LCD_IO &= ~LCD_IO_PCP )
-
-#define __lcd_vsync_get_vps() \
- ( (REG_LCD_VSYNC & LCD_VSYNC_VPS_MASK) >> LCD_VSYNC_VPS_BIT )
-
-#define __lcd_vsync_get_vpe() \
- ( (REG_LCD_VSYNC & LCD_VSYNC_VPE_MASK) >> LCD_VSYNC_VPE_BIT )
-#define __lcd_vsync_set_vpe(n) \
-do { \
- REG_LCD_VSYNC &= ~LCD_VSYNC_VPE_MASK; \
- REG_LCD_VSYNC |= (n) << LCD_VSYNC_VPE_BIT; \
-} while (0)
-
-#define __lcd_hsync_get_hps() \
- ( (REG_LCD_HSYNC & LCD_HSYNC_HPS_MASK) >> LCD_HSYNC_HPS_BIT )
-#define __lcd_hsync_set_hps(n) \
-do { \
- REG_LCD_HSYNC &= ~LCD_HSYNC_HPS_MASK; \
- REG_LCD_HSYNC |= (n) << LCD_HSYNC_HPS_BIT; \
-} while (0)
-
-#define __lcd_hsync_get_hpe() \
- ( (REG_LCD_HSYNC & LCD_HSYNC_HPE_MASK) >> LCD_VSYNC_HPE_BIT )
-#define __lcd_hsync_set_hpe(n) \
-do { \
- REG_LCD_HSYNC &= ~LCD_HSYNC_HPE_MASK; \
- REG_LCD_HSYNC |= (n) << LCD_HSYNC_HPE_BIT; \
-} while (0)
-
-#define __lcd_vat_get_ht() \
- ( (REG_LCD_VAT & LCD_VAT_HT_MASK) >> LCD_VAT_HT_BIT )
-#define __lcd_vat_set_ht(n) \
-do { \
- REG_LCD_VAT &= ~LCD_VAT_HT_MASK; \
- REG_LCD_VAT |= (n) << LCD_VAT_HT_BIT; \
-} while (0)
-
-#define __lcd_vat_get_vt() \
- ( (REG_LCD_VAT & LCD_VAT_VT_MASK) >> LCD_VAT_VT_BIT )
-#define __lcd_vat_set_vt(n) \
-do { \
- REG_LCD_VAT &= ~LCD_VAT_VT_MASK; \
- REG_LCD_VAT |= (n) << LCD_VAT_VT_BIT; \
-} while (0)
-
-#define __lcd_dah_get_hds() \
- ( (REG_LCD_DAH & LCD_DAH_HDS_MASK) >> LCD_DAH_HDS_BIT )
-#define __lcd_dah_set_hds(n) \
-do { \
- REG_LCD_DAH &= ~LCD_DAH_HDS_MASK; \
- REG_LCD_DAH |= (n) << LCD_DAH_HDS_BIT; \
-} while (0)
-
-#define __lcd_dah_get_hde() \
- ( (REG_LCD_DAH & LCD_DAH_HDE_MASK) >> LCD_DAH_HDE_BIT )
-#define __lcd_dah_set_hde(n) \
-do { \
- REG_LCD_DAH &= ~LCD_DAH_HDE_MASK; \
- REG_LCD_DAH |= (n) << LCD_DAH_HDE_BIT; \
-} while (0)
-
-#define __lcd_dav_get_vds() \
- ( (REG_LCD_DAV & LCD_DAV_VDS_MASK) >> LCD_DAV_VDS_BIT )
-#define __lcd_dav_set_vds(n) \
-do { \
- REG_LCD_DAV &= ~LCD_DAV_VDS_MASK; \
- REG_LCD_DAV |= (n) << LCD_DAV_VDS_BIT; \
-} while (0)
-
-#define __lcd_dav_get_vde() \
- ( (REG_LCD_DAV & LCD_DAV_VDE_MASK) >> LCD_DAV_VDE_BIT )
-#define __lcd_dav_set_vde(n) \
-do { \
- REG_LCD_DAV &= ~LCD_DAV_VDE_MASK; \
- REG_LCD_DAV |= (n) << LCD_DAV_VDE_BIT; \
-} while (0)
-
-#define __lcd_cmd0_set_sofint() ( REG_LCD_CMD0 |= LCD_CMD_SOFINT )
-#define __lcd_cmd0_clr_sofint() ( REG_LCD_CMD0 &= ~LCD_CMD_SOFINT )
-#define __lcd_cmd1_set_sofint() ( REG_LCD_CMD1 |= LCD_CMD_SOFINT )
-#define __lcd_cmd1_clr_sofint() ( REG_LCD_CMD1 &= ~LCD_CMD_SOFINT )
-
-#define __lcd_cmd0_set_eofint() ( REG_LCD_CMD0 |= LCD_CMD_EOFINT )
-#define __lcd_cmd0_clr_eofint() ( REG_LCD_CMD0 &= ~LCD_CMD_EOFINT )
-#define __lcd_cmd1_set_eofint() ( REG_LCD_CMD1 |= LCD_CMD_EOFINT )
-#define __lcd_cmd1_clr_eofint() ( REG_LCD_CMD1 &= ~LCD_CMD_EOFINT )
-
-#define __lcd_cmd0_set_pal() ( REG_LCD_CMD0 |= LCD_CMD_PAL )
-#define __lcd_cmd0_clr_pal() ( REG_LCD_CMD0 &= ~LCD_CMD_PAL )
-
-#define __lcd_cmd0_get_len() \
- ( (REG_LCD_CMD0 & LCD_CMD_LEN_MASK) >> LCD_CMD_LEN_BIT )
-#define __lcd_cmd1_get_len() \
- ( (REG_LCD_CMD1 & LCD_CMD_LEN_MASK) >> LCD_CMD_LEN_BIT )
-
-/***************************************************************************
- * RTC ops
- ***************************************************************************/
-
-#define __rtc_write_ready() ( REG_RTC_RCR & RTC_RCR_WRDY )
-#define __rtc_enabled() \
-do{ \
- while(!__rtc_write_ready()); \
- REG_RTC_RCR |= RTC_RCR_RTCE ; \
-}while(0) \
-
-#define __rtc_disabled() \
-do{ \
- while(!__rtc_write_ready()); \
- REG_RTC_RCR &= ~RTC_RCR_RTCE; \
-}while(0)
-#define __rtc_enable_alarm() \
-do{ \
- while(!__rtc_write_ready()); \
- REG_RTC_RCR |= RTC_RCR_AE; \
-}while(0)
-
-#define __rtc_disable_alarm() \
-do{ \
- while(!__rtc_write_ready()); \
- REG_RTC_RCR &= ~RTC_RCR_AE; \
-}while(0)
-
-#define __rtc_enable_alarm_irq() \
-do{ \
- while(!__rtc_write_ready()); \
- REG_RTC_RCR |= RTC_RCR_AIE; \
-}while(0)
-
-#define __rtc_disable_alarm_irq() \
-do{ \
- while(!__rtc_write_ready()); \
- REG_RTC_RCR &= ~RTC_RCR_AIE; \
-}while(0)
-#define __rtc_enable_Hz_irq() \
-do{ \
- while(!__rtc_write_ready()); \
- REG_RTC_RCR |= RTC_RCR_HZIE; \
-}while(0)
-
-#define __rtc_disable_Hz_irq() \
-do{ \
- while(!__rtc_write_ready()); \
- REG_RTC_RCR &= ~RTC_RCR_HZIE; \
-}while(0)
-#define __rtc_get_1Hz_flag() \
-do{ \
- while(!__rtc_write_ready()); \
- ((REG_RTC_RCR >> RTC_RCR_HZ) & 0x1); \
-}while(0)
-#define __rtc_clear_1Hz_flag() \
-do{ \
- while(!__rtc_write_ready()); \
- REG_RTC_RCR &= ~RTC_RCR_HZ; \
-}while(0)
-#define __rtc_get_alarm_flag() \
-do{ \
- while(!__rtc_write_ready()); \
- ((REG_RTC_RCR >> RTC_RCR_AF) & 0x1) \
-while(0)
-#define __rtc_clear_alarm_flag() \
-do{ \
- while(!__rtc_write_ready()); \
- REG_RTC_RCR &= ~RTC_RCR_AF; \
-}while(0)
-#define __rtc_get_second() \
-do{ \
- while(!__rtc_write_ready());\
- REG_RTC_RSR; \
-}while(0)
-
-#define __rtc_set_second(v) \
-do{ \
- while(!__rtc_write_ready()); \
- REG_RTC_RSR = v; \
-}while(0)
-
-#define __rtc_get_alarm_second() \
-do{ \
- while(!__rtc_write_ready()); \
- REG_RTC_RSAR; \
-}while(0)
-
-
-#define __rtc_set_alarm_second(v) \
-do{ \
- while(!__rtc_write_ready()); \
- REG_RTC_RSAR = v; \
-}while(0)
-
-#define __rtc_RGR_is_locked() \
-do{ \
- while(!__rtc_write_ready()); \
- REG_RTC_RGR >> RTC_RGR_LOCK; \
-}while(0)
-#define __rtc_lock_RGR() \
-do{ \
- while(!__rtc_write_ready()); \
- REG_RTC_RGR |= RTC_RGR_LOCK; \
-}while(0)
-
-#define __rtc_unlock_RGR() \
-do{ \
- while(!__rtc_write_ready()); \
- REG_RTC_RGR &= ~RTC_RGR_LOCK; \
-}while(0)
-
-#define __rtc_get_adjc_val() \
-do{ \
- while(!__rtc_write_ready()); \
- ( (REG_RTC_RGR & RTC_RGR_ADJC_MASK) >> RTC_RGR_ADJC_BIT ); \
-}while(0)
-#define __rtc_set_adjc_val(v) \
-do{ \
- while(!__rtc_write_ready()); \
- ( REG_RTC_RGR = ( (REG_RTC_RGR & ~RTC_RGR_ADJC_MASK) | (v << RTC_RGR_ADJC_BIT) )) \
-}while(0)
-
-#define __rtc_get_nc1Hz_val() \
- while(!__rtc_write_ready()); \
- ( (REG_RTC_RGR & RTC_RGR_NC1HZ_MASK) >> RTC_RGR_NC1HZ_BIT )
-
-#define __rtc_set_nc1Hz_val(v) \
-do{ \
- while(!__rtc_write_ready()); \
- ( REG_RTC_RGR = ( (REG_RTC_RGR & ~RTC_RGR_NC1HZ_MASK) | (v << RTC_RGR_NC1HZ_BIT) )) \
-}while(0)
-#define __rtc_power_down() \
-do{ \
- while(!__rtc_write_ready()); \
- REG_RTC_HCR |= RTC_HCR_PD; \
-}while(0)
-
-#define __rtc_get_hwfcr_val() \
-do{ \
- while(!__rtc_write_ready()); \
- REG_RTC_HWFCR & RTC_HWFCR_MASK; \
-}while(0)
-#define __rtc_set_hwfcr_val(v) \
-do{ \
- while(!__rtc_write_ready()); \
- REG_RTC_HWFCR = (v) & RTC_HWFCR_MASK; \
-}while(0)
-
-#define __rtc_get_hrcr_val() \
-do{ \
- while(!__rtc_write_ready()); \
- ( REG_RTC_HRCR & RTC_HRCR_MASK ); \
-}while(0)
-#define __rtc_set_hrcr_val(v) \
-do{ \
- while(!__rtc_write_ready()); \
- ( REG_RTC_HRCR = (v) & RTC_HRCR_MASK ); \
-}while(0)
-
-#define __rtc_enable_alarm_wakeup() \
-do{ \
- while(!__rtc_write_ready()); \
- ( REG_RTC_HWCR |= RTC_HWCR_EALM ); \
-}while(0)
-
-#define __rtc_disable_alarm_wakeup() \
-do{ \
- while(!__rtc_write_ready()); \
- ( REG_RTC_HWCR &= ~RTC_HWCR_EALM ); \
-}while(0)
-
-#define __rtc_status_hib_reset_occur() \
-do{ \
- while(!__rtc_write_ready()); \
- ( (REG_RTC_HWRSR >> RTC_HWRSR_HR) & 0x1 ); \
-}while(0)
-#define __rtc_status_ppr_reset_occur() \
-do{ \
- while(!__rtc_write_ready()); \
- ( (REG_RTC_HWRSR >> RTC_HWRSR_PPR) & 0x1 ); \
-}while(0)
-#define __rtc_status_wakeup_pin_waken_up() \
-do{ \
- while(!__rtc_write_ready()); \
- ( (REG_RTC_HWRSR >> RTC_HWRSR_PIN) & 0x1 ); \
-}while(0)
-#define __rtc_status_alarm_waken_up() \
-do{ \
- while(!__rtc_write_ready()); \
- ( (REG_RTC_HWRSR >> RTC_HWRSR_ALM) & 0x1 ); \
-}while(0)
-#define __rtc_clear_hib_stat_all() \
-do{ \
- while(!__rtc_write_ready()); \
- ( REG_RTC_HWRSR = 0 ); \
-}while(0)
-
-#define __rtc_get_scratch_pattern() \
- while(!__rtc_write_ready()); \
- (REG_RTC_HSPR)
-#define __rtc_set_scratch_pattern(n) \
-do{ \
- while(!__rtc_write_ready()); \
- (REG_RTC_HSPR = n ); \
-}while(0)
-
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __JZ4740_H__ */
diff --git a/package/boot/uboot-xburst/files/include/configs/avt2.h b/package/boot/uboot-xburst/files/include/configs/avt2.h
deleted file mode 100644
index cbf34d7..0000000
--- a/package/boot/uboot-xburst/files/include/configs/avt2.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef __CONFIG_AVT2_H
-#define __CONFIG_AVT2_H
-
-#include <configs/nanonote.h>
-
-#define CONFIG_AVT2 1
-
-#define CONFIG_BOOTARGS "mem=64M console=ttyS0,57600n8 ubi.mtd=2 rootfstype=ubifs root=ubi0:rootfs rw rootwait avt2=1"
-#define CONFIG_BOOTARGSFROMSD "mem=64M console=ttyS0,57600n8 rootfstype=ext2 root=/dev/mmcblk0p1 rw rootwait avt2=1"
-#define CONFIG_BOOTCOMMAND "nand read 0x80600000 0x400000 0x200000;bootm"
-
-/* SDRAM paramters */
-#define SDRAM_BW16 1 /* Data bus width: 0-32bit, 1-16bit */
-#define SDRAM_BANK4 1 /* Banks each chip: 0-2bank, 1-4bank */
-#define SDRAM_ROW 13 /* Row address: 11 to 13 */
-#define SDRAM_COL 10 /* Column address: 8 to 12 */
-#define SDRAM_CASL 2 /* CAS latency: 2 or 3 */
-
-/* SDRAM Timings, unit: ns */
-#define SDRAM_TRAS 45 /* RAS# Active Time */
-#define SDRAM_RCD 20 /* RAS# to CAS# Delay */
-#define SDRAM_TPC 20 /* RAS# Precharge Time */
-#define SDRAM_TRWL 7 /* Write Latency Time */
-#define SDRAM_TREF 15625 /* Refresh period: 8192 cycles/64ms */
-
-#endif /* __CONFIG_AVT_H */
diff --git a/package/boot/uboot-xburst/files/include/configs/n516.h b/package/boot/uboot-xburst/files/include/configs/n516.h
deleted file mode 100644
index c741bfe..0000000
--- a/package/boot/uboot-xburst/files/include/configs/n516.h
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
- * (C) Copyright 2006
- * Ingenic Semiconductor, <jlwei@ingenic.cn>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file contains the configuration parameters for the pavo board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-//#define DEBUG
-//#define DEBUG_SHELL
-
-#define CONFIG_MIPS32 1 /* MIPS32 CPU core */
-#define CONFIG_JzRISC 1 /* JzRISC core */
-#define CONFIG_JZSOC 1 /* Jz SoC */
-#define CONFIG_JZ4740 1 /* Jz4740 SoC */
-#define CONFIG_PAVO 1 /* PAVO validation board */
-
-#define CONFIG_BOARD_NAME "n516"
-#define CONFIG_BOARD_HWREV "1.0"
-#define CONFIG_FIRMWARE_EPOCH "0"
-#define CONFIG_UPDATE_TMPBUF 0x80600000
-#define CONFIG_UPDATE_CHUNKSIZE 0x800000
-#define CONFIG_UPDATE_FILENAME "update.oifw"
-#define CONFIG_UPDATE_FILEEXT ".oifw"
-#define CONFIG_UBI_PARTITION "UBI"
-
-#define CONFIG_SKIP_LOWLEVEL_INIT 1
-#undef CONFIG_SKIP_RELOCATE_UBOOT
-
-#if 0
-#define CONFIG_LCD /* LCD support */
-#define CONFIG_JZLCD_METRONOME_800x600
-#define LCD_BPP LCD_COLOR8
-
-#define WFM_DATA_SIZE ( 1 << 14 )
-#define CONFIG_METRONOME_WF_LEN (64 * (1 << 10))
-#define CONFIG_METRONOME_WF_NAND_OFFSET (0x100000)
-#define BMP_LOGO_HEIGHT 0
-#define CONFIG_UBI_WF_VOLUME "waveforms"
-#define CONFIG_UBI_BOOTSPLASH_VOLUME "bootsplash"
-#define CONFIG_METRONOME_BOOTSPLASH_LEN 480000
-#endif
-
-#if 0
-#define CONFIG_JZSOC_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 0
-#define CONFIG_LPC_I2C_ADDR 0x54
-#endif
-
-#define JZ4740_NORBOOT_CFG JZ4740_NORBOOT_16BIT /* NOR Boot config code */
-#define JZ4740_NANDBOOT_CFG JZ4740_NANDBOOT_B8R3 /* NAND Boot config code */
-
-#define CONFIG_SYS_CPU_SPEED 336000000 /* CPU clock: 336 MHz */
-#define CONFIG_SYS_EXTAL 12000000 /* EXTAL freq: 12 MHz */
-#define CONFIG_SYS_HZ (CONFIG_SYS_EXTAL/256) /* incrementer freq */
-
-#define CONFIG_SYS_UART_BASE UART0_BASE /* Base of the UART channel */
-
-#define CONFIG_BAUDRATE 57600
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-
-#define CONFIG_MMC 1
-#define CONFIG_GENERIC_MMC 1
-#define CONFIG_JZ_MMC 1
-#define CONFIG_FAT 1
-
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 ">"
-#define CONFIG_CMDLINE_EDITING
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#include <config_cmd_default.h>
-
-#undef CONFIG_CMD_BDI /* bdinfo */
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_ECHO /* echo arguments */
-#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
-#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
-#undef CONFIG_CMD_IMI /* iminfo */
-#undef CONFIG_CMD_ITEST /* Integer (and string) test */
-#undef CONFIG_CMD_LOADB /* loadb */
-#undef CONFIG_CMD_LOADS /* loads */
-#undef CONFIG_CMD_NFS /* NFS support */
-#undef CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
-#undef CONFIG_CMD_SOURCE /* "source" command support */
-#undef CONFIG_CMD_XIMG /* Load part of Multi Image */
-#undef CONFIG_CMD_NET
-
-//#define CONFIG_CMD_ASKENV
-//#define CONFIG_CMD_DHCP
-//#define CONFIG_CMD_PING
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_FAT
-/*#define CONFIG_CMD_UBI*/
-/*#define CONFIG_CMD_MTDPARTS*/
-//#define CONFIG_CMD_JFFS2
-//#define CONFIG_JFFS2_NAND
-//#define CONFIG_JFFS2_CMDLINE
-#define CONFIG_CMD_UPDATE
-
-#define CONFIG_DOS_PARTITION
-
-/*#define CONFIG_MTD_PARTITIONS*/
-#define CONFIG_RBTREE
-
-#define CONFIG_BOOTP_MASK ( CONFIG_BOOTP_DEFAUL )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#if 0
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_BOOTDELAY 0
-#define CONFIG_BOOTFILE uImage /* file to load */
-#define CONFIG_BOOTARGS "mem=64M console=ttyS0,57600n8 ip=off rootfstype=ubifs root=ubi:rootfs ubi.mtd=UBI rw panic=5 " MTDPARTS_DEFAULT
-#define CONFIG_BOOTCOMMAND "check_and_update; setenv bootargs $bootargs $batt_level_param; ubi read 0x80600000 bootsplash && show_image 0x80600000; ubi read 0x80600000 kernel; bootm 0x80600000; ubi read 0x80600000 errorsplash && show_image 0x80600000; while test 0 = 0; do check_and_update; done"
-#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */
-#define CONFIG_IPADDR 192.168.111.1
-#define CONFIG_SERVERIP 192.168.111.2
-#define MTDIDS_DEFAULT "nand0=jz4740-nand"
-#define MTDPARTS_DEFAULT "mtdparts=jz4740-nand:1M@0(uboot)ro,-@1M(UBI)"
-#define CONFIG_EXTRA_ENV_SETTINGS "mtdids=nand0=jz4740-nand\0mtdparts=mtdparts=jz4740-nand:1M@0(uboot)ro,-@1M(UBI)\0" \
- "stdout=serial\0stderr=lcd\0"
-#endif
-
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAUL)
-#define CONFIG_BOOTDELAY 0
-#define CONFIG_BOOTFILE "uImage" /* file to load */
-#define CONFIG_BOOTARGS "mem=64M console=ttyS0,57600n8 ubi.mtd=2 rootfstype=ubifs root=ubi0:rootfs rw rootwait"
-#define CONFIG_BOOTCOMMAND "nand read 0x80600000 0x400000 0x200000;bootm"
-
-
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
-/*
- * Serial download configuration
- *
- */
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "n516 # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
-
-#define CONFIG_SYS_MALLOC_LEN 1024*1024*2
-#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
-
-#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
-
-#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
-
-#define CONFIG_SYS_LOAD_ADDR 0x80600000 /* default load address */
-
-#define CONFIG_SYS_MEMTEST_START 0x80100000
-#define CONFIG_SYS_MEMTEST_END 0x80800000
-
-/*-----------------------------------------------------------------------
- * Environment
- *----------------------------------------------------------------------*/
-#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
-#else
-#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
-#endif
-
-/*-----------------------------------------------------------------------
- * NAND FLASH configuration
- */
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define NAND_MAX_CHIPS 1
-#define CONFIG_SYS_NAND_BASE 0xB8000000
-#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
-
-/*
- * IPL (Initial Program Loader, integrated inside CPU)
- * Will load first 8k from NAND (SPL) into cache and execute it from there.
- *
- * SPL (Secondary Program Loader)
- * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
- * has to fit into 8kByte. It sets up the CPU and configures the SDRAM
- * controller and the NAND controller so that the special U-Boot image can be
- * loaded from NAND to SDRAM.
- *
- * NUB (NAND U-Boot)
- * This NAND U-Boot (NUB) is a special U-Boot version which can be started
- * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
- *
- */
-#define CONFIG_SYS_NAND_U_BOOT_DST 0x80100000 /* Load NUB to this addr */
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST /* Start NUB from this addr */
-
-/*
- * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
- */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) /* Offset to RAM U-Boot image */
-#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) /* Size of RAM U-Boot image */
-
-#define CONFIG_SYS_NAND_PAGE_SIZE 2048
-#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) /* NAND chip block size */
-#define CONFIG_SYS_NAND_BADBLOCK_PAGE 63 /* NAND bad block was marked at this page in a block, starting from 0 */
-#define CONFIG_SYS_NAND_ECC_POS 6
-
-#ifdef CONFIG_ENV_IS_IN_NAND
-//#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_SIZE (128 * 1024)
-//#define CONFIG_ENV_OFFSET (CONFIG_SYS_NAND_BLOCK_SIZE + CONFIG_SYS_NAND_U_BOOT_SIZE + CONFIG_SYS_NAND_BLOCK_SIZE) /* environment starts here */
-#define CONFIG_ENV_OFFSET (CONFIG_SYS_NAND_U_BOOT_SIZE + CONFIG_SYS_NAND_U_BOOT_OFFS)
-//#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#endif
-
-
-/*-----------------------------------------------------------------------
- * NOR FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
-
-#define PHYS_FLASH_1 0xa8000000 /* Flash Bank #1 */
-
-/* The following #defines are needed to get flash environment right */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* in pavo/config.mk TEXT_BASE=0x88000000*/
-#define CONFIG_SYS_SYS_MONITOR_BASE TEXT_BASE /* in pavo/config.mk TEXT_BASE=0x88000000*/
-#define CONFIG_SYS_MONITOR_LEN (256*1024) /* Reserve 256 kB for Monitor */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_IS_NOWHERE 1
-#define CONFIG_ENV_ADDR 0xa8040000
-#define CONFIG_ENV_SIZE 0x20000
-#endif
-
-/*-----------------------------------------------------------------------
- * SDRAM Info.
- */
-#define CONFIG_NR_DRAM_BANKS 1
-
-// SDRAM paramters
-#define SDRAM_BW16 0 /* Data bus width: 0-32bit, 1-16bit */
-#define SDRAM_BANK4 1 /* Banks each chip: 0-2bank, 1-4bank */
-#define SDRAM_ROW 13 /* Row address: 11 to 13 */
-#define SDRAM_COL 9 /* Column address: 8 to 12 */
-#define SDRAM_CASL 2 /* CAS latency: 2 or 3 */
-
-// SDRAM Timings, unit: ns
-#define SDRAM_TRAS 45 /* RAS# Active Time */
-#define SDRAM_RCD 20 /* RAS# to CAS# Delay */
-#define SDRAM_TPC 20 /* RAS# Precharge Time */
-#define SDRAM_TRWL 7 /* Write Latency Time */
-#define SDRAM_TREF 15625 /* Refresh period: 4096 refresh cycles/64ms */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_DCACHE_SIZE 16384
-#define CONFIG_SYS_ICACHE_SIZE 16384
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
-/*-----------------------------------------------------------------------
- * GPIO definition
- */
-#define GPIO_SD_VCC_EN_N 113 /* GPD17 */
-#define GPIO_SD_CD_N 103 /* GPD7 */
-#define GPIO_SD_WP 111 /* GPD15 */
-#define GPIO_USB_DETE 115 /* GPD6 */
-//#define GPIO_DC_DETE_N 103 /* GPD7 */
-#define GPIO_CHARG_STAT_N 112 /* GPD15 */
-#define GPIO_DISP_OFF_N 97 /* GPD1 */
-#define GPIO_UDC_HOTPLUG 100 /* GPD4 */
-#define GPIO_LED_EN 124 /* GPD28 */
-
-#define GPIO_RST_L 50 /* GPB18 LCD_SPL */
-#define GPIO_LCDRDY 49 /* GPB17 LCD_CLS */
-#define GPIO_STBY 86 /* GPC22 LCD_PS */
-#define GPIO_ERR 87 /* GPC23 LCD_REV */
-
-#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-xburst/files/include/configs/nanonote.h b/package/boot/uboot-xburst/files/include/configs/nanonote.h
deleted file mode 100644
index 8926877..0000000
--- a/package/boot/uboot-xburst/files/include/configs/nanonote.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * Authors: Xiangfu Liu <xiangfu.z@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 3 of the License, or (at your option) any later version.
- */
-
-/*
- * This file contains the configuration parameters for the NanoNote.
- */
-#ifndef __CONFIG_NANONOTE_H
-#define __CONFIG_NANONOTE_H
-
-#define CONFIG_MIPS32 1 /* MIPS32 CPU core */
-#define CONFIG_JzRISC 1 /* JzRISC core */
-#define CONFIG_JZSOC 1 /* Jz SoC */
-#define CONFIG_JZ4740 1 /* Jz4740 SoC */
-#define CONFIG_NANONOTE 1
-
-#define CONFIG_LCD 1 /* LCD support */
-#define LCD_BPP LCD_COLOR32 /*5:18,24,32 bits per pixel */
-#define CONFIG_SYS_WHITE_ON_BLACK 1
-
-#define CONFIG_SYS_CPU_SPEED 336000000 /* CPU clock: 336 MHz */
-#define CONFIG_SYS_EXTAL 12000000 /* EXTAL freq: 12 MHz */
-#define CONFIG_SYS_HZ (CONFIG_SYS_EXTAL / 256) /* incrementer freq */
-#define CONFIG_SYS_MIPS_TIMER_FREQ CONFIG_SYS_CPU_SPEED
-
-#define CONFIG_SYS_UART_BASE UART0_BASE /* Base of the UART channel */
-#define CONFIG_BAUDRATE 57600
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-#define CONFIG_MMC 1
-#define CONFIG_FAT 1
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_SKIP_LOWLEVEL_INIT 1
-#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CONFIG_SYS_NO_FLASH 1
-#define CONFIG_ENV_OVERWRITE 1
-
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAUL)
-#define CONFIG_BOOTDELAY 0
-#define CONFIG_BOOTFILE "uImage" /* file to load */
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_BOOTD /* bootd */
-#define CONFIG_CMD_CONSOLE /* coninfo */
-#define CONFIG_CMD_ECHO /* echo arguments */
-
-#define CONFIG_CMD_LOADB /* loadb */
-#define CONFIG_CMD_LOADS /* loads */
-#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */
-#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/
-#define CONFIG_CMD_RUN /* run command in env variable */
-#define CONFIG_CMD_SAVEENV /* saveenv */
-#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
-#define CONFIG_CMD_SOURCE /* "source" command support */
-
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_FAT
-
-/*
- * Serial download configuration
- */
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "QI# " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
-
-#define CONFIG_SYS_MALLOC_LEN 896 * 1024
-#define CONFIG_SYS_BOOTPARAMS_LEN 128 * 1024
-
-#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
-#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
-#define CONFIG_SYS_LOAD_ADDR 0x80600000 /* default load address */
-#define CONFIG_SYS_MEMTEST_START 0x80100000
-#define CONFIG_SYS_MEMTEST_END 0x80800000
-
-/*
- * Environment
- */
-#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
-
-/*
- * NAND FLASH configuration
- */
-/* NAND Boot config code */
-#define JZ4740_NANDBOOT_CFG JZ4740_NANDBOOT_B8R3
-
-#define NANONOTE_NAND_SIZE 2 /* if board nand flash is 1GB, set to 1
- * if board nand flash is 2GB, set to 2
- * for change the PAGE_SIZE and BLOCK_SIZE
- * will delete when there is no 1GB flash
- */
-
-#define CONFIG_SYS_NAND_PAGE_SIZE (2048 * NANONOTE_NAND_SIZE)
-/* nand chip block size */
-#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * NANONOTE_NAND_SIZE << 10)
-/* nand bad block was marked at this page in a block, start from 0 */
-#define CONFIG_SYS_NAND_BADBLOCK_PAGE 127
-/* ECC offset position in oob area, default value is 6 if it isn't defined */
-#define CONFIG_SYS_NAND_ECC_POS (6 * NANONOTE_NAND_SIZE)
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define NAND_MAX_CHIPS 1
-#define CONFIG_SYS_NAND_BASE 0xB8000000
-#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl.*/
-#define CONFIG_SYS_ONENAND_BASE CONFIG_SYS_NAND_BASE
-
-/*
- * IPL (Initial Program Loader, integrated inside CPU)
- * Will load first 8k from NAND (SPL) into cache and execute it from there.
- *
- * SPL (Secondary Program Loader)
- * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
- * has to fit into 8kByte. It sets up the CPU and configures the SDRAM
- * controller and the NAND controller so that the special U-Boot image can be
- * loaded from NAND to SDRAM.
- *
- * NUB (NAND U-Boot)
- * This NAND U-Boot (NUB) is a special U-Boot version which can be started
- * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
- *
- */
-#define CONFIG_SYS_NAND_U_BOOT_DST 0x80100000 /* Load NUB to this addr */
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
-/* Start NUB from this addr*/
-
-/*
- * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
- */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) /* Offset to RAM U-Boot image */
-#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) /* Size of RAM U-Boot image */
-
-#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET (CONFIG_SYS_NAND_BLOCK_SIZE + CONFIG_SYS_NAND_U_BOOT_SIZE + CONFIG_SYS_NAND_BLOCK_SIZE)
-/* environment starts here */
-#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-
-/* in board/nanonote/config.mk TEXT_BAS = 0x88000000 */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-
-/*
- * SDRAM Info.
- */
-#define CONFIG_NR_DRAM_BANKS 1
-
-/*
- * Cache Configuration
- */
-#define CONFIG_SYS_DCACHE_SIZE 16384
-#define CONFIG_SYS_ICACHE_SIZE 16384
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
-/*
- * GPIO definition
- */
-#define GPIO_LCD_CS (2 * 32 + 21)
-#define GPIO_DISP_OFF_N (3 * 32 + 21)
-#define GPIO_PWM (3 * 32 + 27)
-
-#define GPIO_AMP_EN (3 * 32 + 4)
-
-#define GPIO_SDPW_EN (3 * 32 + 2)
-#define GPIO_SD_DETECT (3 * 32 + 0)
-
-#define GPIO_USB_DETECT (3 * 32 + 27)
-#define GPIO_BUZZ_PWM (3 * 32 + 28)
-
-#define GPIO_AUDIO_POP (1 * 32 + 29)
-#define GPIO_COB_TEST (1 * 32 + 30)
-
-#define GPIO_KEYOUT_BASE (2 * 32 + 10)
-#define GPIO_KEYIN_BASE (3 * 32 + 18)
-#define GPIO_KEYIN_8 (3 * 32 + 26)
-
-#define GPIO_SD_CD_N GPIO_SD_DETECT /* SD Card insert detect */
-#define GPIO_SD_VCC_EN_N GPIO_SDPW_EN /* SD Card Power Enable */
-
-#endif /* __CONFIG_NANONOTE_H */
diff --git a/package/boot/uboot-xburst/files/include/configs/qi_lb60.h b/package/boot/uboot-xburst/files/include/configs/qi_lb60.h
deleted file mode 100644
index 1542c3d..0000000
--- a/package/boot/uboot-xburst/files/include/configs/qi_lb60.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef __CONFIG_QI_LB60_H
-#define __CONFIG_QI_LB60_H
-
-#include <configs/nanonote.h>
-
-#define CONFIG_QI_LB60 1
-
-#define CONFIG_BOOTARGS "mem=32M console=ttyS0,57600n8 ubi.mtd=2 rootfstype=ubifs root=ubi0:rootfs rw rootwait"
-#define CONFIG_BOOTARGSFROMSD "mem=32M console=ttyS0,57600n8 rootfstype=ext2 root=/dev/mmcblk0p2 rw rootwait"
-#define CONFIG_BOOTCOMMAND "nand read 0x80600000 0x400000 0x200000;bootm"
-#define CONFIG_BOOTCOMMANDFROMSD "mmc init; fatload mmc 0 0x80600000 uImage; bootm"
-
-/* SDRAM paramters */
-#define SDRAM_BW16 1 /* Data bus width: 0-32bit, 1-16bit */
-#define SDRAM_BANK4 1 /* Banks each chip: 0-2bank, 1-4bank */
-#define SDRAM_ROW 13 /* Row address: 11 to 13 */
-#define SDRAM_COL 9 /* Column address: 8 to 12 */
-#define SDRAM_CASL 2 /* CAS latency: 2 or 3 */
-
-/* SDRAM Timings, unit: ns */
-#define SDRAM_TRAS 45 /* RAS# Active Time */
-#define SDRAM_RCD 20 /* RAS# to CAS# Delay */
-#define SDRAM_TPC 20 /* RAS# Precharge Time */
-#define SDRAM_TRWL 7 /* Write Latency Time */
-#define SDRAM_TREF 15625 /* Refresh period: 8192 cycles/64ms */
-
-#endif
diff --git a/package/boot/uboot-xburst/files/include/configs/sakc.h b/package/boot/uboot-xburst/files/include/configs/sakc.h
deleted file mode 100644
index b88d8b0..0000000
--- a/package/boot/uboot-xburst/files/include/configs/sakc.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * Authors: Xiangfu Liu <xiangfu.z@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 3 of the License, or (at your option) any later version.
- */
-
-/*
- * This file contains the configuration parameters for SAKC.
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define DEBUG
-#define CONFIG_MIPS32 1 /* MIPS32 CPU core */
-#define CONFIG_JzRISC 1 /* JzRISC core */
-#define CONFIG_JZSOC 1 /* Jz SoC */
-#define CONFIG_JZ4725 1 /* Jz4725 SoC */
-#define CONFIG_JZ4740 1 /* Jz4740 SoC */
-#define CONFIG_SAKC 1 /* SAKC board */
-
-#define MMC_BUS_WIDTH_1BIT 1 /* 1 for MMC 1Bit Bus Width */
-
-//#define CONFIG_LCD 1 /* LCD support */
-//#define LCD_BPP LCD_COLOR32 /*5:18,24,32 bits per pixel */
-//#define CONFIG_SYS_WHITE_ON_BLACK 1
-
-#define CONFIG_SYS_CPU_SPEED 336000000 /* CPU clock: 336 MHz */
-#define CONFIG_SYS_EXTAL 12000000 /* EXTAL freq: 12 MHz */
-#define CONFIG_SYS_HZ (CONFIG_SYS_EXTAL / 256) /* incrementer freq */
-#define CONFIG_SYS_MIPS_TIMER_FREQ CONFIG_SYS_CPU_SPEED
-
-#define CONFIG_SYS_UART_BASE UART0_BASE /* Base of the UART channel */
-#define CONFIG_BAUDRATE 57600
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-#define CONFIG_MMC 1
-#define CONFIG_FAT 1
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_SKIP_LOWLEVEL_INIT 1
-#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CONFIG_SYS_NO_FLASH 1
-#define CONFIG_ENV_OVERWRITE 1
-
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAUL)
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTFILE "uImage" /* file to load */
-#define CONFIG_BOOTARGS "mem=32M console=ttyS0,57600n8 ubi.mtd=2 rootfstype=ubifs root=ubi0:rootfs rw rootwait"
-#define CONFIG_EXTRA_ENV_SETTINGS 1
-#define CONFIG_BOOTARGSFROMSD "mem=32M console=ttyS0,57600n8 rootfstype=ext2 root=/dev/mmcblk0p1 rw rootwait"
-#define CONFIG_BOOTCOMMAND "nand read 0x80600000 0x400000 0x200000;bootm"
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_BDI /* bdinfo */
-#define CONFIG_CMD_BOOTD /* bootd */
-#define CONFIG_CMD_CONSOLE /* coninfo */
-#define CONFIG_CMD_ECHO /* echo arguments */
-#define CONFIG_CMD_IMI /* iminfo */
-#define CONFIG_CMD_ITEST /* Integer (and string) test */
-
-#define CONFIG_CMD_LOADB /* loadb */
-#define CONFIG_CMD_LOADS /* loads */
-#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */
-#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/
-#define CONFIG_CMD_RUN /* run command in env variable */
-#define CONFIG_CMD_SAVEENV /* saveenv */
-#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
-#define CONFIG_CMD_SOURCE /* "source" command support */
-#define CONFIG_CMD_XIMG /* Load part of Multi Image */
-
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_FAT
-
-/*
- * Serial download configuration
- */
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "SAKC# " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
-
-#define CONFIG_SYS_MALLOC_LEN 128 * 1024
-#define CONFIG_SYS_BOOTPARAMS_LEN 128 * 1024
-
-#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
-#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
-#define CONFIG_SYS_LOAD_ADDR 0x80600000 /* default load address */
-#define CONFIG_SYS_MEMTEST_START 0x80100000
-#define CONFIG_SYS_MEMTEST_END 0x80800000
-
-/*
- * Environment
- */
-#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
-
-/*
- * NAND FLASH configuration
- */
-/* NAND Boot config code */
-#define JZ4740_NANDBOOT_CFG JZ4740_NANDBOOT_B8R3
-
-#define SAKC_NAND_SIZE 1 /* if board nand flash is 1GB, set to 1
- * if board nand flash is 2GB, set to 2
- * for change the PAGE_SIZE and BLOCK_SIZE
- * will delete when there is no 1GB flash
- */
-
-#define CONFIG_SYS_NAND_PAGE_SIZE (2048 * SAKC_NAND_SIZE)
-/* nand chip block size */
-#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * SAKC_NAND_SIZE << 10)
-/* nand bad block was marked at this page in a block, start from 0 */
-#define CONFIG_SYS_NAND_BADBLOCK_PAGE 127
-/* ECC offset position in oob area, default value is 6 if it isn't defined */
-#define CONFIG_SYS_NAND_ECC_POS (6 * SAKC_NAND_SIZE)
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define NAND_MAX_CHIPS 1
-#define CONFIG_SYS_NAND_BASE 0xB8000000
-#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl.*/
-#define CONFIG_SYS_ONENAND_BASE CONFIG_SYS_NAND_BASE
-
-/*
- * IPL (Initial Program Loader, integrated inside CPU)
- * Will load first 8k from NAND (SPL) into cache and execute it from there.
- *
- * SPL (Secondary Program Loader)
- * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
- * has to fit into 8kByte. It sets up the CPU and configures the SDRAM
- * controller and the NAND controller so that the special U-Boot image can be
- * loaded from NAND to SDRAM.
- *
- * NUB (NAND U-Boot)
- * This NAND U-Boot (NUB) is a special U-Boot version which can be started
- * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
- *
- */
-#define CONFIG_SYS_NAND_U_BOOT_DST 0x80100000 /* Load NUB to this addr */
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
-/* Start NUB from this addr*/
-
-/*
- * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
- */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) /* Offset to RAM U-Boot image */
-#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) /* Size of RAM U-Boot image */
-
-#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET (CONFIG_SYS_NAND_BLOCK_SIZE + CONFIG_SYS_NAND_U_BOOT_SIZE + CONFIG_SYS_NAND_BLOCK_SIZE)
-/* environment starts here */
-#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-
-/* in qi_lb60.h/config.mk TEXT_BAS = 0x88000000 */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-
-/*
- * SDRAM Info.
- */
-#define CONFIG_NR_DRAM_BANKS 1
-
-/* SDRAM paramters */
-#define SDRAM_BW16 1 /* Data bus width: 0-32bit, 1-16bit */
-#define SDRAM_BANK4 1 /* Banks each chip: 0-2bank, 1-4bank */
-#define SDRAM_ROW 13 /* Row address: 11 to 13 */
-#define SDRAM_COL 9 /* Column address: 8 to 12 */
-#define SDRAM_CASL 2 /* CAS latency: 2 or 3 */
-
-/* SDRAM Timings, unit: ns */
-#define SDRAM_TRAS 45 /* RAS# Active Time */
-#define SDRAM_RCD 20 /* RAS# to CAS# Delay */
-#define SDRAM_TPC 20 /* RAS# Precharge Time */
-#define SDRAM_TRWL 7 /* Write Latency Time */
-#define SDRAM_TREF 15625 /* Refresh period: 8192 cycles/64ms */
-
-/*
- * Cache Configuration
- */
-#define CONFIG_SYS_DCACHE_SIZE 16384
-#define CONFIG_SYS_ICACHE_SIZE 16384
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
-/*
- * GPIO definition
- */
-#define GPIO_SD_DETECT (2 * 32 + 27)
-#define GPIO_SD_CD_N GPIO_SD_DETECT /* SD Card insert detect */
-#define GPIO_SD_VCC_EN_N GPIO_SDPW_EN /* SD Card Power Enable */
-
-#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-xburst/files/nand_spl/board/n516/Makefile b/package/boot/uboot-xburst/files/nand_spl/board/n516/Makefile
deleted file mode 100644
index bd45379..0000000
--- a/package/boot/uboot-xburst/files/nand_spl/board/n516/Makefile
+++ /dev/null
@@ -1,104 +0,0 @@
-#
-# (C) Copyright 2006
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
-
-LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE)
-AFLAGS += -DCONFIG_NAND_SPL
-CFLAGS += -DCONFIG_NAND_SPL
-
-SOBJS = start.o usb_boot.o
-COBJS = nand_boot_jz4740.o cpu.o jz4740.o jz_serial.o
-
-SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-__OBJS := $(SOBJS) $(COBJS)
-LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR)
-
-nandobj := $(OBJTREE)/nand_spl/
-
-ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
-all: $(obj).depend $(ALL)
-
-$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl.bin
- dd bs=1024 count=8 if=/dev/zero of=$(nandobj)junk1
- cat $< $(nandobj)junk1 > $(nandobj)junk2
- dd bs=1024 count=8 if=$(nandobj)junk2 of=$(nandobj)junk3
- cat $(nandobj)junk3 $(nandobj)junk3 > $(nandobj)junk4
- dd bs=1024 count=256 if=/dev/zero of=$(nandobj)junk5
- cat $(nandobj)junk4 $(nandobj)junk5 > $(nandobj)junk6
- dd bs=1024 count=256 if=$(nandobj)junk6 of=$@
- rm -f $(nandobj)junk*
-
-$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
- $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-
-$(nandobj)u-boot-spl: $(OBJS)
- cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
- -Map $(nandobj)u-boot-spl.map \
- -o $(nandobj)u-boot-spl
-
-# create symbolic links for common files
-
-# from cpu directory
-$(obj)start.S:
- @rm -f $(obj)start.S
- ln -s $(SRCTREE)/cpu/mips/start.S $(obj)start.S
-
-$(obj)usb_boot.S:
- @rm -f $(obj)usb_boot.S
- ln -s $(SRCTREE)/cpu/mips/usb_boot.S $(obj)usb_boot.S
-
-$(obj)cpu.c:
- @rm -f $(obj)cpu.c
- ln -s $(SRCTREE)/cpu/mips/cpu.c $(obj)cpu.c
-
-$(obj)jz4740.c:
- @rm -f $(obj)jz4740.c
- ln -s $(SRCTREE)/cpu/mips/jz4740.c $(obj)jz4740.c
-
-$(obj)jz_serial.c:
- @rm -f $(obj)jz_serial.c
- ln -s $(SRCTREE)/cpu/mips/jz_serial.c $(obj)jz_serial.c
-
-# from nand_spl directory
-$(obj)nand_boot_jz4740.c:
- @rm -f $(obj)nand_boot_jz4740.c
- ln -s $(SRCTREE)/nand_spl/nand_boot_jz4740.c $(obj)nand_boot_jz4740.c
-
-#########################################################################
-
-$(obj)%.o: $(obj)%.S
- $(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o: $(obj)%.c
- $(CC) $(CFLAGS) -c -o $@ $<
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/package/boot/uboot-xburst/files/nand_spl/board/n516/config.mk b/package/boot/uboot-xburst/files/nand_spl/board/n516/config.mk
deleted file mode 100644
index 698c476..0000000
--- a/package/boot/uboot-xburst/files/nand_spl/board/n516/config.mk
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# (C) Copyright 2006
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-#
-# Ingenic JZ4740 Reference Platform
-#
-
-#
-# TEXT_BASE for SPL:
-#
-# On JZ4730 platforms the SPL is located at 0x80000000...0x80001000,
-# in the first 4kBytes of memory space in cache. So we set
-# TEXT_BASE to starting address in internal cache here.
-#
-TEXT_BASE = 0x80000000
diff --git a/package/boot/uboot-xburst/files/nand_spl/board/n516/u-boot.lds b/package/boot/uboot-xburst/files/nand_spl/board/n516/u-boot.lds
deleted file mode 100644
index 7042388..0000000
--- a/package/boot/uboot-xburst/files/nand_spl/board/n516/u-boot.lds
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * (C) Copyright 2005
- * Ingenic Semiconductor, <jlwei@ingenic.cn>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips")
-
-OUTPUT_ARCH(mips)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- *(.text)
- }
-
- . = ALIGN(4);
- .rodata : { *(.rodata) }
-
- . = ALIGN(4);
- .data : { *(.data) }
-
- . = ALIGN(4);
- .sdata : { *(.sdata) }
-
- _gp = ALIGN(16);
-
- __got_start = .;
- .got : { *(.got) }
- __got_end = .;
-
- .sdata : { *(.sdata) }
-
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- uboot_end_data = .;
- num_got_entries = (__got_end - __got_start) >> 2;
-
- . = ALIGN(4);
- .sbss : { *(.sbss) }
- .bss : { *(.bss) }
- uboot_end = .;
-}
diff --git a/package/boot/uboot-xburst/files/nand_spl/board/nanonote/Makefile b/package/boot/uboot-xburst/files/nand_spl/board/nanonote/Makefile
deleted file mode 100644
index bd45379..0000000
--- a/package/boot/uboot-xburst/files/nand_spl/board/nanonote/Makefile
+++ /dev/null
@@ -1,104 +0,0 @@
-#
-# (C) Copyright 2006
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
-
-LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE)
-AFLAGS += -DCONFIG_NAND_SPL
-CFLAGS += -DCONFIG_NAND_SPL
-
-SOBJS = start.o usb_boot.o
-COBJS = nand_boot_jz4740.o cpu.o jz4740.o jz_serial.o
-
-SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-__OBJS := $(SOBJS) $(COBJS)
-LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR)
-
-nandobj := $(OBJTREE)/nand_spl/
-
-ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
-all: $(obj).depend $(ALL)
-
-$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl.bin
- dd bs=1024 count=8 if=/dev/zero of=$(nandobj)junk1
- cat $< $(nandobj)junk1 > $(nandobj)junk2
- dd bs=1024 count=8 if=$(nandobj)junk2 of=$(nandobj)junk3
- cat $(nandobj)junk3 $(nandobj)junk3 > $(nandobj)junk4
- dd bs=1024 count=256 if=/dev/zero of=$(nandobj)junk5
- cat $(nandobj)junk4 $(nandobj)junk5 > $(nandobj)junk6
- dd bs=1024 count=256 if=$(nandobj)junk6 of=$@
- rm -f $(nandobj)junk*
-
-$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
- $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-
-$(nandobj)u-boot-spl: $(OBJS)
- cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
- -Map $(nandobj)u-boot-spl.map \
- -o $(nandobj)u-boot-spl
-
-# create symbolic links for common files
-
-# from cpu directory
-$(obj)start.S:
- @rm -f $(obj)start.S
- ln -s $(SRCTREE)/cpu/mips/start.S $(obj)start.S
-
-$(obj)usb_boot.S:
- @rm -f $(obj)usb_boot.S
- ln -s $(SRCTREE)/cpu/mips/usb_boot.S $(obj)usb_boot.S
-
-$(obj)cpu.c:
- @rm -f $(obj)cpu.c
- ln -s $(SRCTREE)/cpu/mips/cpu.c $(obj)cpu.c
-
-$(obj)jz4740.c:
- @rm -f $(obj)jz4740.c
- ln -s $(SRCTREE)/cpu/mips/jz4740.c $(obj)jz4740.c
-
-$(obj)jz_serial.c:
- @rm -f $(obj)jz_serial.c
- ln -s $(SRCTREE)/cpu/mips/jz_serial.c $(obj)jz_serial.c
-
-# from nand_spl directory
-$(obj)nand_boot_jz4740.c:
- @rm -f $(obj)nand_boot_jz4740.c
- ln -s $(SRCTREE)/nand_spl/nand_boot_jz4740.c $(obj)nand_boot_jz4740.c
-
-#########################################################################
-
-$(obj)%.o: $(obj)%.S
- $(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o: $(obj)%.c
- $(CC) $(CFLAGS) -c -o $@ $<
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/package/boot/uboot-xburst/files/nand_spl/board/nanonote/config.mk b/package/boot/uboot-xburst/files/nand_spl/board/nanonote/config.mk
deleted file mode 100644
index 698c476..0000000
--- a/package/boot/uboot-xburst/files/nand_spl/board/nanonote/config.mk
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# (C) Copyright 2006
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-#
-# Ingenic JZ4740 Reference Platform
-#
-
-#
-# TEXT_BASE for SPL:
-#
-# On JZ4730 platforms the SPL is located at 0x80000000...0x80001000,
-# in the first 4kBytes of memory space in cache. So we set
-# TEXT_BASE to starting address in internal cache here.
-#
-TEXT_BASE = 0x80000000
diff --git a/package/boot/uboot-xburst/files/nand_spl/board/nanonote/u-boot.lds b/package/boot/uboot-xburst/files/nand_spl/board/nanonote/u-boot.lds
deleted file mode 100644
index 7042388..0000000
--- a/package/boot/uboot-xburst/files/nand_spl/board/nanonote/u-boot.lds
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * (C) Copyright 2005
- * Ingenic Semiconductor, <jlwei@ingenic.cn>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips")
-
-OUTPUT_ARCH(mips)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- *(.text)
- }
-
- . = ALIGN(4);
- .rodata : { *(.rodata) }
-
- . = ALIGN(4);
- .data : { *(.data) }
-
- . = ALIGN(4);
- .sdata : { *(.sdata) }
-
- _gp = ALIGN(16);
-
- __got_start = .;
- .got : { *(.got) }
- __got_end = .;
-
- .sdata : { *(.sdata) }
-
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- uboot_end_data = .;
- num_got_entries = (__got_end - __got_start) >> 2;
-
- . = ALIGN(4);
- .sbss : { *(.sbss) }
- .bss : { *(.bss) }
- uboot_end = .;
-}
diff --git a/package/boot/uboot-xburst/files/nand_spl/board/sakc/Makefile b/package/boot/uboot-xburst/files/nand_spl/board/sakc/Makefile
deleted file mode 100644
index bd45379..0000000
--- a/package/boot/uboot-xburst/files/nand_spl/board/sakc/Makefile
+++ /dev/null
@@ -1,104 +0,0 @@
-#
-# (C) Copyright 2006
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
-
-LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE)
-AFLAGS += -DCONFIG_NAND_SPL
-CFLAGS += -DCONFIG_NAND_SPL
-
-SOBJS = start.o usb_boot.o
-COBJS = nand_boot_jz4740.o cpu.o jz4740.o jz_serial.o
-
-SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-__OBJS := $(SOBJS) $(COBJS)
-LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR)
-
-nandobj := $(OBJTREE)/nand_spl/
-
-ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
-all: $(obj).depend $(ALL)
-
-$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl.bin
- dd bs=1024 count=8 if=/dev/zero of=$(nandobj)junk1
- cat $< $(nandobj)junk1 > $(nandobj)junk2
- dd bs=1024 count=8 if=$(nandobj)junk2 of=$(nandobj)junk3
- cat $(nandobj)junk3 $(nandobj)junk3 > $(nandobj)junk4
- dd bs=1024 count=256 if=/dev/zero of=$(nandobj)junk5
- cat $(nandobj)junk4 $(nandobj)junk5 > $(nandobj)junk6
- dd bs=1024 count=256 if=$(nandobj)junk6 of=$@
- rm -f $(nandobj)junk*
-
-$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
- $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-
-$(nandobj)u-boot-spl: $(OBJS)
- cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
- -Map $(nandobj)u-boot-spl.map \
- -o $(nandobj)u-boot-spl
-
-# create symbolic links for common files
-
-# from cpu directory
-$(obj)start.S:
- @rm -f $(obj)start.S
- ln -s $(SRCTREE)/cpu/mips/start.S $(obj)start.S
-
-$(obj)usb_boot.S:
- @rm -f $(obj)usb_boot.S
- ln -s $(SRCTREE)/cpu/mips/usb_boot.S $(obj)usb_boot.S
-
-$(obj)cpu.c:
- @rm -f $(obj)cpu.c
- ln -s $(SRCTREE)/cpu/mips/cpu.c $(obj)cpu.c
-
-$(obj)jz4740.c:
- @rm -f $(obj)jz4740.c
- ln -s $(SRCTREE)/cpu/mips/jz4740.c $(obj)jz4740.c
-
-$(obj)jz_serial.c:
- @rm -f $(obj)jz_serial.c
- ln -s $(SRCTREE)/cpu/mips/jz_serial.c $(obj)jz_serial.c
-
-# from nand_spl directory
-$(obj)nand_boot_jz4740.c:
- @rm -f $(obj)nand_boot_jz4740.c
- ln -s $(SRCTREE)/nand_spl/nand_boot_jz4740.c $(obj)nand_boot_jz4740.c
-
-#########################################################################
-
-$(obj)%.o: $(obj)%.S
- $(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o: $(obj)%.c
- $(CC) $(CFLAGS) -c -o $@ $<
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/package/boot/uboot-xburst/files/nand_spl/board/sakc/config.mk b/package/boot/uboot-xburst/files/nand_spl/board/sakc/config.mk
deleted file mode 100644
index 698c476..0000000
--- a/package/boot/uboot-xburst/files/nand_spl/board/sakc/config.mk
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# (C) Copyright 2006
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-#
-# Ingenic JZ4740 Reference Platform
-#
-
-#
-# TEXT_BASE for SPL:
-#
-# On JZ4730 platforms the SPL is located at 0x80000000...0x80001000,
-# in the first 4kBytes of memory space in cache. So we set
-# TEXT_BASE to starting address in internal cache here.
-#
-TEXT_BASE = 0x80000000
diff --git a/package/boot/uboot-xburst/files/nand_spl/board/sakc/u-boot.lds b/package/boot/uboot-xburst/files/nand_spl/board/sakc/u-boot.lds
deleted file mode 100644
index 7042388..0000000
--- a/package/boot/uboot-xburst/files/nand_spl/board/sakc/u-boot.lds
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * (C) Copyright 2005
- * Ingenic Semiconductor, <jlwei@ingenic.cn>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips")
-
-OUTPUT_ARCH(mips)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- *(.text)
- }
-
- . = ALIGN(4);
- .rodata : { *(.rodata) }
-
- . = ALIGN(4);
- .data : { *(.data) }
-
- . = ALIGN(4);
- .sdata : { *(.sdata) }
-
- _gp = ALIGN(16);
-
- __got_start = .;
- .got : { *(.got) }
- __got_end = .;
-
- .sdata : { *(.sdata) }
-
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- uboot_end_data = .;
- num_got_entries = (__got_end - __got_start) >> 2;
-
- . = ALIGN(4);
- .sbss : { *(.sbss) }
- .bss : { *(.bss) }
- uboot_end = .;
-}
diff --git a/package/boot/uboot-xburst/files/nand_spl/nand_boot_jz4740.c b/package/boot/uboot-xburst/files/nand_spl/nand_boot_jz4740.c
deleted file mode 100644
index 9df0596..0000000
--- a/package/boot/uboot-xburst/files/nand_spl/nand_boot_jz4740.c
+++ /dev/null
@@ -1,429 +0,0 @@
-/*
- * Copyright (C) 2007 Ingenic Semiconductor Inc.
- * Author: Peter <jlwei@ingenic.cn>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <nand.h>
-
-#include <asm/io.h>
-#include <asm/jz4740.h>
-
-#define KEY_U_OUT (32 * 2 + 16)
-#define KEY_U_IN (32 * 3 + 19)
-
-/*
- * NAND flash definitions
- */
-
-#define NAND_DATAPORT 0xb8000000
-#define NAND_ADDRPORT 0xb8010000
-#define NAND_COMMPORT 0xb8008000
-
-#define ECC_BLOCK 512
-#define ECC_POS 6
-#define PAR_SIZE 9
-
-#define __nand_enable() (REG_EMC_NFCSR |= EMC_NFCSR_NFE1 | EMC_NFCSR_NFCE1)
-#define __nand_disable() (REG_EMC_NFCSR &= ~(EMC_NFCSR_NFCE1))
-#define __nand_ecc_rs_encoding() \
- (REG_EMC_NFECR = EMC_NFECR_ECCE | EMC_NFECR_ERST | EMC_NFECR_RS | EMC_NFECR_RS_ENCODING)
-#define __nand_ecc_rs_decoding() \
- (REG_EMC_NFECR = EMC_NFECR_ECCE | EMC_NFECR_ERST | EMC_NFECR_RS | EMC_NFECR_RS_DECODING)
-#define __nand_ecc_disable() (REG_EMC_NFECR &= ~EMC_NFECR_ECCE)
-#define __nand_ecc_encode_sync() while (!(REG_EMC_NFINTS & EMC_NFINTS_ENCF))
-#define __nand_ecc_decode_sync() while (!(REG_EMC_NFINTS & EMC_NFINTS_DECF))
-
-static inline void __nand_dev_ready(void)
-{
- unsigned int timeout = 10000;
- while ((REG_GPIO_PXPIN(2) & 0x40000000) && timeout--);
- while (!(REG_GPIO_PXPIN(2) & 0x40000000));
-}
-
-#define __nand_cmd(n) (REG8(NAND_COMMPORT) = (n))
-#define __nand_addr(n) (REG8(NAND_ADDRPORT) = (n))
-#define __nand_data8() REG8(NAND_DATAPORT)
-#define __nand_data16() REG16(NAND_DATAPORT)
-
-#if (JZ4740_NANDBOOT_CFG == JZ4740_NANDBOOT_B8R3)
- #define NAND_BUS_WIDTH 8
- #define NAND_ROW_CYCLE 3
-#elif (JZ4740_NANDBOOT_CFG == JZ4740_NANDBOOT_B8R2)
- #define NAND_BUS_WIDTH 8
- #define NAND_ROW_CYCLE 2
-#elif (JZ4740_NANDBOOT_CFG == JZ4740_NANDBOOT_B16R3)
- #define NAND_BUS_WIDTH 16
- #define NAND_ROW_CYCLE 3
-#elif (JZ4740_NANDBOOT_CFG == JZ4740_NANDBOOT_B16R2)
- #define NAND_BUS_WIDTH 16
- #define NAND_ROW_CYCLE 2
-#endif
-
-/*
- * NAND flash parameters
- */
-static int page_size = 2048;
-static int oob_size = 64;
-static int ecc_count = 4;
-static int page_per_block = 64;
-static int bad_block_pos = 0;
-static int block_size = 131072;
-
-static unsigned char oob_buf[128] = {0};
-
-/*
- * External routines
- */
-extern void flush_cache_all(void);
-extern int serial_init(void);
-extern void serial_puts(const char *s);
-extern void sdram_init(void);
-extern void pll_init(void);
-extern void usb_boot();
-
-/*
- * NAND flash routines
- */
-#if NAND_BUS_WIDTH == 16
-static inline void nand_read_buf16(void *buf, int count)
-{
- int i;
- u16 *p = (u16 *)buf;
-
- for (i = 0; i < count; i += 2)
- *p++ = __nand_data16();
-}
-#define nand_read_buf nand_read_buf16
-
-#elif NAND_BUS_WIDTH == 8
-static inline void nand_read_buf8(void *buf, int count)
-{
- int i;
- u8 *p = (u8 *)buf;
-
- for (i = 0; i < count; i++)
- *p++ = __nand_data8();
-}
-#define nand_read_buf nand_read_buf8
-
-#endif
-
-/* Correct 1~9-bit errors in 512-bytes data */
-static void rs_correct(unsigned char *dat, int idx, int mask)
-{
- int i;
-
- idx--;
-
- i = idx + (idx >> 3);
- if (i >= 512)
- return;
-
- mask <<= (idx & 0x7);
-
- dat[i] ^= mask & 0xff;
- if (i < 511)
- dat[i+1] ^= (mask >> 8) & 0xff;
-}
-
-static int nand_read_oob(int page_addr, uchar *buf, int size)
-{
- int col_addr;
- if (page_size != 512)
- col_addr = page_size;
- else {
- col_addr = 0;
- __nand_dev_ready();
- }
-
- if (page_size != 512)
- /* Send READ0 command */
- __nand_cmd(NAND_CMD_READ0);
- else
- /* Send READOOB command */
- __nand_cmd(NAND_CMD_READOOB);
-
- /* Send column address */
- __nand_addr(col_addr & 0xff);
- if (page_size != 512)
- __nand_addr((col_addr >> 8) & 0xff);
-
- /* Send page address */
- __nand_addr(page_addr & 0xff);
- __nand_addr((page_addr >> 8) & 0xff);
- #ifdef NAND_ROW_CYCLE == 3
- __nand_addr((page_addr >> 16) & 0xff);
- #endif
-
- /* Send READSTART command for 2048 or 4096 ps NAND */
- if (page_size != 512)
- __nand_cmd(NAND_CMD_READSTART);
-
- /* Wait for device ready */
- __nand_dev_ready();
-
- /* Read oob data */
- nand_read_buf(buf, size);
- if (page_size == 512)
- __nand_dev_ready();
- return 0;
-}
-
-static int nand_read_page(int page_addr, uchar *dst, uchar *oobbuf)
-{
- uchar *databuf = dst, *tmpbuf;
- int i, j;
-
- /*
- * Read oob data
- */
- nand_read_oob(page_addr, oobbuf, oob_size);
-
- /*
- * Read page data
- */
-
- /* Send READ0 command */
- __nand_cmd(NAND_CMD_READ0);
-
- /* Send column address */
- __nand_addr(0);
- if (page_size != 512)
- __nand_addr(0);
-
- /* Send page address */
- __nand_addr(page_addr & 0xff);
- __nand_addr((page_addr >> 8) & 0xff);
- #if NAND_ROW_CYCLE == 3
- __nand_addr((page_addr >> 16) & 0xff);
- #endif
-
- /* Send READSTART command for 2048 or 4096 ps NAND */
- if (page_size != 512)
- __nand_cmd(NAND_CMD_READSTART);
-
- /* Wait for device ready */
- __nand_dev_ready();
-
- /* Read page data */
- tmpbuf = databuf;
-
- for (i = 0; i < ecc_count; i++) {
- volatile unsigned char *paraddr = (volatile unsigned char *)EMC_NFPAR0;
- unsigned int stat;
-
- /* Enable RS decoding */
- REG_EMC_NFINTS = 0x0;
- __nand_ecc_rs_decoding();
-
- /* Read data */
- nand_read_buf((void *)tmpbuf, ECC_BLOCK);
-
- /* Set PAR values */
- for (j = 0; j < PAR_SIZE; j++) {
-#if defined(CONFIG_SYS_NAND_ECC_POS)
- *paraddr++ = oobbuf[CONFIG_SYS_NAND_ECC_POS + i*PAR_SIZE + j];
-#else
- *paraddr++ = oobbuf[ECC_POS + i*PAR_SIZE + j];
-#endif
- }
-
- /* Set PRDY */
- REG_EMC_NFECR |= EMC_NFECR_PRDY;
-
- /* Wait for completion */
- __nand_ecc_decode_sync();
-
- /* Disable decoding */
- __nand_ecc_disable();
-
- /* Check result of decoding */
- stat = REG_EMC_NFINTS;
- if (stat & EMC_NFINTS_ERR) {
- /* Error occurred */
- /* serial_puts("\n Error occurred\n"); */
- if (stat & EMC_NFINTS_UNCOR) {
- /* Uncorrectable error occurred */
- /* serial_puts("\nUncorrectable error occurred\n"); */
- }
- else {
- unsigned int errcnt, index, mask;
-
- errcnt = (stat & EMC_NFINTS_ERRCNT_MASK) >> EMC_NFINTS_ERRCNT_BIT;
- switch (errcnt) {
- case 4:
- index = (REG_EMC_NFERR3 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT;
- mask = (REG_EMC_NFERR3 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT;
- rs_correct(tmpbuf, index, mask);
- /* FALL-THROUGH */
- case 3:
- index = (REG_EMC_NFERR2 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT;
- mask = (REG_EMC_NFERR2 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT;
- rs_correct(tmpbuf, index, mask);
- /* FALL-THROUGH */
- case 2:
- index = (REG_EMC_NFERR1 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT;
- mask = (REG_EMC_NFERR1 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT;
- rs_correct(tmpbuf, index, mask);
- /* FALL-THROUGH */
- case 1:
- index = (REG_EMC_NFERR0 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT;
- mask = (REG_EMC_NFERR0 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT;
- rs_correct(tmpbuf, index, mask);
- break;
- default:
- break;
- }
- }
- }
-
- tmpbuf += ECC_BLOCK;
- }
-
- return 0;
-}
-
-#ifndef CONFIG_SYS_NAND_BADBLOCK_PAGE
-#define CONFIG_SYS_NAND_BADBLOCK_PAGE 0 /* NAND bad block was marked at this page in a block, starting from 0 */
-#endif
-
-static void nand_load(int offs, int uboot_size, uchar *dst)
-{
- int page;
- int pagecopy_count;
-
- __nand_enable();
-
- page = offs / page_size;
- pagecopy_count = 0;
- while (pagecopy_count < (uboot_size / page_size)) {
- if (page % page_per_block == 0) {
- nand_read_oob(page + CONFIG_SYS_NAND_BADBLOCK_PAGE, oob_buf, oob_size);
- if (oob_buf[bad_block_pos] != 0xff) {
- page += page_per_block;
- /* Skip bad block */
- continue;
- }
- }
- /* Load this page to dst, do the ECC */
- nand_read_page(page, dst, oob_buf);
-
- dst += page_size;
- page++;
- pagecopy_count++;
- }
-
- __nand_disable();
-}
-
-static void jz_nand_init(void) {
-
- /* Optimize the timing of nand */
- REG_EMC_SMCR1 = 0x094c4400;
-}
-
-static void gpio_init(void)
-{
- /*
- * Initialize SDRAM pins
- */
-#if defined(CONFIG_JZ4720)
- __gpio_as_sdram_16bit_4720();
-#elif defined(CONFIG_JZ4725)
- __gpio_as_sdram_16bit_4725();
-#else
- __gpio_as_sdram_32bit();
-#endif
-
- /*
- * Initialize UART0 pins
- */
- __gpio_as_uart0();
-}
-
-static int is_usb_boot()
-{
- int keyU = 0;
-
- __gpio_as_input(KEY_U_IN);
- __gpio_enable_pull(KEY_U_IN);
-
- __gpio_as_output(KEY_U_OUT);
- __gpio_clear_pin(KEY_U_OUT);
-
- keyU = __gpio_get_pin(KEY_U_IN);
-
- if (keyU)
- serial_puts("[U] not pressed\n");
- else
- serial_puts("[U] pressed\n");
-
- return !keyU;
-}
-
-void nand_boot(void)
-{
- void (*uboot)(void);
-
- /*
- * Init hardware
- */
- jz_nand_init();
- gpio_init();
- serial_init();
-
- serial_puts("\n\nNAND Secondary Program Loader\n\n");
-
- pll_init();
- sdram_init();
-
-#if defined(CONFIG_NANONOTE)
- if(is_usb_boot()) {
- serial_puts("enter USB BOOT mode\n");
- usb_boot();
- }
-#endif
-
- page_size = CONFIG_SYS_NAND_PAGE_SIZE;
- block_size = CONFIG_SYS_NAND_BLOCK_SIZE;
- page_per_block = CONFIG_SYS_NAND_BLOCK_SIZE / CONFIG_SYS_NAND_PAGE_SIZE;
- bad_block_pos = (page_size == 512) ? 5 : 0;
- oob_size = page_size / 32;
- ecc_count = page_size / ECC_BLOCK;
-
- /*
- * Load U-Boot image from NAND into RAM
- */
- nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE,
- (uchar *)CONFIG_SYS_NAND_U_BOOT_DST);
-
- uboot = (void (*)(void))CONFIG_SYS_NAND_U_BOOT_START;
-
- serial_puts("Starting U-Boot ...\n");
-
- /*
- * Flush caches
- */
- flush_cache_all();
-
- /*
- * Jump to U-Boot image
- */
- (*uboot)();
-}
diff --git a/package/boot/uboot-xburst/patches/0001-qi_lb60-add-nand-spl-support.patch b/package/boot/uboot-xburst/patches/0001-qi_lb60-add-nand-spl-support.patch
new file mode 100644
index 0000000..e770243
--- /dev/null
+++ b/package/boot/uboot-xburst/patches/0001-qi_lb60-add-nand-spl-support.patch
@@ -0,0 +1,894 @@
+From 0329cf7965956a5a7044827e0ce88ae8d5150e54 Mon Sep 17 00:00:00 2001
+From: Xiangfu <xiangfu@openmobilefree.net>
+Date: Fri, 12 Oct 2012 09:46:58 +0800
+Subject: [PATCH 1/6] qi_lb60: add nand spl support
+
+ The JZ4740 CPU can load 8KB from two different addresses:
+ 1. the normal area up to 8KB starting from NAND flash address 0x00000000
+ 2. the backup area up to 8KB starting from NAND flash address 0x00002000
+
+Signed-off-by: Xiangfu <xiangfu@openmobilefree.net>
+---
+ Makefile | 12 +++
+ arch/mips/cpu/xburst/Makefile | 7 +-
+ arch/mips/cpu/xburst/cpu.c | 4 +
+ arch/mips/cpu/xburst/jz4740.c | 82 +++++++----------
+ arch/mips/cpu/xburst/spl/Makefile | 47 ++++++++++
+ arch/mips/cpu/xburst/spl/start.S | 63 +++++++++++++
+ board/qi/qi_lb60/Makefile | 4 +
+ board/qi/qi_lb60/qi_lb60-spl.c | 30 +++++++
+ board/qi/qi_lb60/qi_lb60.c | 8 +-
+ board/qi/qi_lb60/u-boot-spl.lds | 61 +++++++++++++
+ drivers/mtd/nand/jz4740_nand.c | 39 ++++++++-
+ include/configs/qi_lb60.h | 175 ++++++++++++++++++-------------------
+ 12 files changed, 386 insertions(+), 146 deletions(-)
+ create mode 100644 arch/mips/cpu/xburst/spl/Makefile
+ create mode 100644 arch/mips/cpu/xburst/spl/start.S
+ create mode 100644 board/qi/qi_lb60/qi_lb60-spl.c
+ create mode 100644 board/qi/qi_lb60/u-boot-spl.lds
+
+diff --git a/Makefile b/Makefile
+index 34d9075..a22778e 100644
+--- a/Makefile
++++ b/Makefile
+@@ -393,6 +393,10 @@ ALL-y += $(obj)u-boot-nodtb-tegra.bin
+ endif
+ endif
+
++ifeq ($(CPU),xburst)
++ALL-y += $(obj)u-boot-xburst.bin
++endif
++
+ all: $(ALL-y) $(SUBDIR_EXAMPLES)
+
+ $(obj)u-boot.dtb: $(obj)u-boot
+@@ -506,6 +510,14 @@ $(obj)u-boot-nodtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+ endif
+ endif
+
++ifeq ($(CPU),xburst)
++$(obj)u-boot-xburst.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
++ dd if=$(obj)spl/u-boot-spl.bin of=$(obj)spl/u-boot-pad.bin conv=sync bs=8192 count=1
++ dd if=$(obj)spl/u-boot-spl.bin of=$(obj)spl/u-boot-pad.bin conv=sync,notrunc oflag=append bs=8192 count=1
++ tr '\0' '\377' < /dev/zero | dd of=$(obj)spl/u-boot-pad.bin conv=sync,notrunc oflag=append bs=16384 count=1
++ cat $(obj)spl/u-boot-pad.bin u-boot.bin > $@
++endif
++
+ ifeq ($(CONFIG_SANDBOX),y)
+ GEN_UBOOT = \
+ cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \
+diff --git a/arch/mips/cpu/xburst/Makefile b/arch/mips/cpu/xburst/Makefile
+index b1f2ae4..ec35e55 100644
+--- a/arch/mips/cpu/xburst/Makefile
++++ b/arch/mips/cpu/xburst/Makefile
+@@ -24,9 +24,12 @@ include $(TOPDIR)/config.mk
+
+ LIB = $(obj)lib$(CPU).o
+
++COBJS-y = cpu.o jz_serial.o
++
++ifneq ($(CONFIG_SPL_BUILD),y)
+ START = start.o
+-SOBJS-y =
+-COBJS-y = cpu.o timer.o jz_serial.o
++COBJS-y += timer.o
++endif
+
+ COBJS-$(CONFIG_JZ4740) += jz4740.o
+
+diff --git a/arch/mips/cpu/xburst/cpu.c b/arch/mips/cpu/xburst/cpu.c
+index ddcbfaa..1432838 100644
+--- a/arch/mips/cpu/xburst/cpu.c
++++ b/arch/mips/cpu/xburst/cpu.c
+@@ -42,6 +42,8 @@
+ : \
+ : "i" (op), "R" (*(unsigned char *)(addr)))
+
++#ifndef CONFIG_SPL_BUILD
++
+ void __attribute__((weak)) _machine_restart(void)
+ {
+ struct jz4740_wdt *wdt = (struct jz4740_wdt *)JZ4740_WDT_BASE;
+@@ -109,6 +111,8 @@ void invalidate_dcache_range(ulong start_addr, ulong stop)
+ cache_op(Hit_Invalidate_D, addr);
+ }
+
++#endif
++
+ void flush_icache_all(void)
+ {
+ u32 addr, t = 0;
+diff --git a/arch/mips/cpu/xburst/jz4740.c b/arch/mips/cpu/xburst/jz4740.c
+index c0b9817..8816aa3 100644
+--- a/arch/mips/cpu/xburst/jz4740.c
++++ b/arch/mips/cpu/xburst/jz4740.c
+@@ -32,31 +32,19 @@ int disable_interrupts(void)
+ return 0;
+ }
+
+-/*
+- * PLL output clock = EXTAL * NF / (NR * NO)
+- * NF = FD + 2, NR = RD + 2
+- * NO = 1 (if OD = 0), NO = 2 (if OD = 1 or 2), NO = 4 (if OD = 3)
+- */
+ void pll_init(void)
+ {
+ struct jz4740_cpm *cpm = (struct jz4740_cpm *)JZ4740_CPM_BASE;
+
+- register unsigned int cfcr, plcr1;
+- int n2FR[33] = {
+- 0, 0, 1, 2, 3, 0, 4, 0, 5, 0, 0, 0, 6, 0, 0, 0,
+- 7, 0, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0, 0, 0,
+- 9
+- };
+- int div[5] = {1, 3, 3, 3, 3}; /* divisors of I:S:P:L:M */
+- int nf, pllout2;
++ register unsigned int cfcr, plcr;
++ unsigned int nf, pllout2;
+
+ cfcr = CPM_CPCCR_CLKOEN |
+- CPM_CPCCR_PCS |
+- (n2FR[div[0]] << CPM_CPCCR_CDIV_BIT) |
+- (n2FR[div[1]] << CPM_CPCCR_HDIV_BIT) |
+- (n2FR[div[2]] << CPM_CPCCR_PDIV_BIT) |
+- (n2FR[div[3]] << CPM_CPCCR_MDIV_BIT) |
+- (n2FR[div[4]] << CPM_CPCCR_LDIV_BIT);
++ (0 << CPM_CPCCR_CDIV_BIT) |
++ (2 << CPM_CPCCR_HDIV_BIT) |
++ (2 << CPM_CPCCR_PDIV_BIT) |
++ (2 << CPM_CPCCR_MDIV_BIT) |
++ (2 << CPM_CPCCR_LDIV_BIT);
+
+ pllout2 = (cfcr & CPM_CPCCR_PCS) ?
+ CONFIG_SYS_CPU_SPEED : (CONFIG_SYS_CPU_SPEED / 2);
+@@ -65,15 +53,18 @@ void pll_init(void)
+ writel(pllout2 / 48000000 - 1, &cpm->uhccdr);
+
+ nf = CONFIG_SYS_CPU_SPEED * 2 / CONFIG_SYS_EXTAL;
+- plcr1 = ((nf - 2) << CPM_CPPCR_PLLM_BIT) | /* FD */
++ plcr = ((nf - 2) << CPM_CPPCR_PLLM_BIT) | /* FD */
+ (0 << CPM_CPPCR_PLLN_BIT) | /* RD=0, NR=2 */
+ (0 << CPM_CPPCR_PLLOD_BIT) | /* OD=0, NO=1 */
+- (0x20 << CPM_CPPCR_PLLST_BIT) | /* PLL stable time */
++ (0x32 << CPM_CPPCR_PLLST_BIT) | /* PLL stable time */
+ CPM_CPPCR_PLLEN; /* enable PLL */
+
+ /* init PLL */
+ writel(cfcr, &cpm->cpccr);
+- writel(plcr1, &cpm->cppcr);
++ writel(plcr, &cpm->cppcr);
++
++ while (!(readl(&cpm->cppcr) & CPM_CPPCR_PLLS))
++ ;
+ }
+
+ void sdram_init(void)
+@@ -92,26 +83,12 @@ void sdram_init(void)
+ 2 << EMC_DMCR_TCL_BIT /* CAS latency is 3 */
+ };
+
+- int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
+-
+ cpu_clk = CONFIG_SYS_CPU_SPEED;
+- mem_clk = cpu_clk * div[__cpm_get_cdiv()] / div[__cpm_get_mdiv()];
++ mem_clk = 84000000;
+
+ writel(0, &emc->bcr); /* Disable bus release */
+ writew(0, &emc->rtcsr); /* Disable clock for counting */
+
+- /* Fault DMCR value for mode register setting*/
+-#define SDRAM_ROW0 11
+-#define SDRAM_COL0 8
+-#define SDRAM_BANK40 0
+-
+- dmcr0 = ((SDRAM_ROW0 - 11) << EMC_DMCR_RA_BIT) |
+- ((SDRAM_COL0 - 8) << EMC_DMCR_CA_BIT) |
+- (SDRAM_BANK40 << EMC_DMCR_BA_BIT) |
+- (SDRAM_BW16 << EMC_DMCR_BW_BIT) |
+- EMC_DMCR_EPIN |
+- cas_latency_dmcr[((SDRAM_CASL == 3) ? 1 : 0)];
+-
+ /* Basic DMCR value */
+ dmcr = ((SDRAM_ROW - 11) << EMC_DMCR_RA_BIT) |
+ ((SDRAM_COL - 8) << EMC_DMCR_CA_BIT) |
+@@ -128,31 +105,31 @@ void sdram_init(void)
+ if (tmp > 11)
+ tmp = 11;
+ dmcr |= (tmp - 4) << EMC_DMCR_TRAS_BIT;
+- tmp = SDRAM_RCD / ns;
+
++ tmp = SDRAM_RCD / ns;
+ if (tmp > 3)
+ tmp = 3;
+ dmcr |= tmp << EMC_DMCR_RCD_BIT;
+- tmp = SDRAM_TPC / ns;
+
++ tmp = SDRAM_TPC / ns;
+ if (tmp > 7)
+ tmp = 7;
+ dmcr |= tmp << EMC_DMCR_TPC_BIT;
+- tmp = SDRAM_TRWL / ns;
+
++ tmp = SDRAM_TRWL / ns;
+ if (tmp > 3)
+ tmp = 3;
+ dmcr |= tmp << EMC_DMCR_TRWL_BIT;
+- tmp = (SDRAM_TRAS + SDRAM_TPC) / ns;
+
++ tmp = (SDRAM_TRAS + SDRAM_TPC) / ns;
+ if (tmp > 14)
+ tmp = 14;
+ dmcr |= ((tmp + 1) >> 1) << EMC_DMCR_TRC_BIT;
+
+ /* SDRAM mode value */
+- sdmode = EMC_SDMR_BT_SEQ |
+- EMC_SDMR_OM_NORMAL |
+- EMC_SDMR_BL_4 |
++ sdmode = EMC_SDMR_BT_SEQ |
++ EMC_SDMR_OM_NORMAL |
++ EMC_SDMR_BL_4 |
+ cas_latency_sdmr[((SDRAM_CASL == 3) ? 1 : 0)];
+
+ /* Stage 1. Precharge all banks by writing SDMR with DMCR.MRSET=0 */
+@@ -172,8 +149,8 @@ void sdram_init(void)
+ if (tmp > 0xff)
+ tmp = 0xff;
+ writew(tmp, &emc->rtcor);
++
+ writew(0, &emc->rtcnt);
+- /* Divisor is 64, CKO/64 */
+ writew(EMC_RTCSR_CKS_64, &emc->rtcsr);
+
+ /* Wait for number of auto-refresh cycles */
+@@ -182,13 +159,17 @@ void sdram_init(void)
+ ;
+
+ /* Stage 3. Mode Register Set */
++ dmcr0 = (11 << EMC_DMCR_RA_BIT) |
++ (8 << EMC_DMCR_CA_BIT) |
++ (0 << EMC_DMCR_BA_BIT) |
++ EMC_DMCR_EPIN |
++ (SDRAM_BW16 << EMC_DMCR_BW_BIT) |
++ cas_latency_dmcr[((SDRAM_CASL == 3) ? 1 : 0)];
+ writel(dmcr0 | EMC_DMCR_RFSH | EMC_DMCR_MRSET, &emc->dmcr);
+ writeb(0, JZ4740_EMC_SDMR0 | sdmode);
+
+ /* Set back to basic DMCR value */
+ writel(dmcr | EMC_DMCR_RFSH | EMC_DMCR_MRSET, &emc->dmcr);
+-
+- /* everything is ok now */
+ }
+
+ DECLARE_GLOBAL_DATA_PTR;
+@@ -232,9 +213,10 @@ void rtc_init(void)
+ phys_size_t initdram(int board_type)
+ {
+ struct jz4740_emc *emc = (struct jz4740_emc *)JZ4740_EMC_BASE;
+- u32 dmcr;
+- u32 rows, cols, dw, banks;
+- ulong size;
++
++ unsigned int dmcr;
++ unsigned int rows, cols, dw, banks;
++ unsigned long size;
+
+ dmcr = readl(&emc->dmcr);
+ rows = 11 + ((dmcr & EMC_DMCR_RA_MASK) >> EMC_DMCR_RA_BIT);
+diff --git a/arch/mips/cpu/xburst/spl/Makefile b/arch/mips/cpu/xburst/spl/Makefile
+new file mode 100644
+index 0000000..f45e8c8
+--- /dev/null
++++ b/arch/mips/cpu/xburst/spl/Makefile
+@@ -0,0 +1,47 @@
++#
++# Copyright (C) 2011 Xiangfu Liu <xiangfu@openmobilefree.net>
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(CPU).o
++
++START = start.o
++SOBJS-y =
++COBJS-y =
++
++SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
++OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
++START := $(addprefix $(obj),$(START))
++
++all: $(obj).depend $(START) $(LIB)
++
++$(LIB): $(OBJS)
++ $(call cmd_link_o_target, $(OBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+diff --git a/arch/mips/cpu/xburst/spl/start.S b/arch/mips/cpu/xburst/spl/start.S
+new file mode 100644
+index 0000000..e31c4c8
+--- /dev/null
++++ b/arch/mips/cpu/xburst/spl/start.S
+@@ -0,0 +1,63 @@
++/*
++ * Copyright (c) 2010 Xiangfu Liu <xiangfu@openmobilefree.net>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 3 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <config.h>
++#include <version.h>
++#include <asm/regdef.h>
++#include <asm/mipsregs.h>
++#include <asm/addrspace.h>
++#include <asm/cacheops.h>
++
++#include <asm/jz4740.h>
++
++ .set noreorder
++
++ .globl _start
++ .text
++_start:
++ .word JZ4740_NANDBOOT_CFG /* fetched during NAND Boot */
++reset:
++ /*
++ * STATUS register
++ * CU0=UM=EXL=IE=0, BEV=ERL=1, IP2~7=1
++ */
++ li t0, 0x0040FC04
++ mtc0 t0, CP0_STATUS
++ /*
++ * CAUSE register
++ * IV=1, use the specical interrupt vector (0x200)
++ */
++ li t1, 0x00800000
++ mtc0 t1, CP0_CAUSE
++
++ bal 1f
++ nop
++ .word _GLOBAL_OFFSET_TABLE_
++1:
++ move gp, ra
++ lw t1, 0(ra)
++ move gp, t1
++
++ la sp, 0x80004000
++ la t9, nand_spl_boot
++ j t9
++ nop
+diff --git a/board/qi/qi_lb60/Makefile b/board/qi/qi_lb60/Makefile
+index 5dae11b..e399246 100644
+--- a/board/qi/qi_lb60/Makefile
++++ b/board/qi/qi_lb60/Makefile
+@@ -22,7 +22,11 @@ include $(TOPDIR)/config.mk
+
+ LIB = $(obj)lib$(BOARD).o
+
++ifeq ($(CONFIG_SPL_BUILD),y)
++COBJS := $(BOARD)-spl.o
++else
+ COBJS := $(BOARD).o
++endif
+
+ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+ OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+diff --git a/board/qi/qi_lb60/qi_lb60-spl.c b/board/qi/qi_lb60/qi_lb60-spl.c
+new file mode 100644
+index 0000000..3fe3fa3
+--- /dev/null
++++ b/board/qi/qi_lb60/qi_lb60-spl.c
+@@ -0,0 +1,30 @@
++/*
++ * Authors: Xiangfu Liu <xiangfu@openmobilefree.cc>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 3 of the License, or (at your option) any later version.
++ */
++
++#include <common.h>
++#include <nand.h>
++#include <asm/io.h>
++#include <asm/jz4740.h>
++
++void nand_spl_boot(void)
++{
++ __gpio_as_sdram_16bit_4720();
++ __gpio_as_uart0();
++ __gpio_jtag_to_uart0();
++
++ serial_init();
++
++ pll_init();
++ sdram_init();
++
++ nand_init();
++
++ puts("\nQi LB60 SPL: Starting U-Boot ...\n");
++ nand_boot();
++}
+diff --git a/board/qi/qi_lb60/qi_lb60.c b/board/qi/qi_lb60/qi_lb60.c
+index d975209..3bd4e2f 100644
+--- a/board/qi/qi_lb60/qi_lb60.c
++++ b/board/qi/qi_lb60/qi_lb60.c
+@@ -1,5 +1,5 @@
+ /*
+- * Authors: Xiangfu Liu <xiangfu@sharism.cc>
++ * Authors: Xiangfu Liu <xiangfu@openmobilefree.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+@@ -97,8 +97,10 @@ int board_early_init_f(void)
+ /* U-Boot common routines */
+ int checkboard(void)
+ {
+- printf("Board: Qi LB60 (Ingenic XBurst Jz4740 SoC, Speed %ld MHz)\n",
+- gd->cpu_clk / 1000000);
++ printf("Board: Qi LB60 (Ingenic XBurst Jz4740 SoC)\n");
++ printf(" CPU: %ld\n", gd->cpu_clk);
++ printf(" MEM: %ld\n", gd->mem_clk);
++ printf(" DEV: %ld\n", gd->dev_clk);
+
+ return 0;
+ }
+diff --git a/board/qi/qi_lb60/u-boot-spl.lds b/board/qi/qi_lb60/u-boot-spl.lds
+new file mode 100644
+index 0000000..930537f
+--- /dev/null
++++ b/board/qi/qi_lb60/u-boot-spl.lds
+@@ -0,0 +1,61 @@
++/*
++ * (C) Copyright 2012 Xiangfu Liu <xiangfu@openmobilefree.net>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips")
++
++OUTPUT_ARCH(mips)
++ENTRY(_start)
++SECTIONS
++{
++ . = 0x80000000;
++ . = ALIGN(4);
++ .text :
++ {
++ *(.text)
++ }
++
++ . = ALIGN(4);
++ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
++
++ . = ALIGN(4);
++ .data : { *(.data) }
++
++ . = ALIGN(4);
++ .sdata : { *(.sdata) }
++
++ _gp = ALIGN(16);
++
++ __got_start = .;
++ .got : { *(.got) }
++ __got_end = .;
++
++ . = .;
++ __u_boot_cmd_start = .;
++ .u_boot_cmd : { *(.u_boot_cmd) }
++ __u_boot_cmd_end = .;
++
++ uboot_end_data = .;
++ num_got_entries = (__got_end - __got_start) >> 2;
++
++ . = ALIGN(4);
++ .sbss : { *(.sbss) }
++ .bss : { *(.bss) }
++ uboot_end = .;
++}
++ASSERT(uboot_end <= 0x80002000, "NAND bootstrap too big");
+diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
+index 3ec34f3..24a4921 100644
+--- a/drivers/mtd/nand/jz4740_nand.c
++++ b/drivers/mtd/nand/jz4740_nand.c
+@@ -15,6 +15,9 @@
+ #include <asm/io.h>
+ #include <asm/jz4740.h>
+
++#ifdef CONFIG_SPL_BUILD
++#define printf(s) puts(s)
++#endif
+ #define JZ_NAND_DATA_ADDR ((void __iomem *)0xB8000000)
+ #define JZ_NAND_CMD_ADDR (JZ_NAND_DATA_ADDR + 0x8000)
+ #define JZ_NAND_ADDR_ADDR (JZ_NAND_DATA_ADDR + 0x10000)
+@@ -176,7 +179,7 @@ static int jz_nand_rs_correct_data(struct mtd_info *mtd, u_char *dat,
+ for (k = 0; k < 9; k++)
+ writeb(read_ecc[k], &emc->nfpar[k]);
+ }
+- /* Set PRDY */
++
+ writel(readl(&emc->nfecr) | EMC_NFECR_PRDY, &emc->nfecr);
+
+ /* Wait for completion */
+@@ -184,7 +187,7 @@ static int jz_nand_rs_correct_data(struct mtd_info *mtd, u_char *dat,
+ status = readl(&emc->nfints);
+ } while (!(status & EMC_NFINTS_DECF));
+
+- /* disable ecc */
++ /* Disable ECC */
+ writel(readl(&emc->nfecr) & ~EMC_NFECR_ECCE, &emc->nfecr);
+
+ /* Check decoding */
+@@ -192,7 +195,7 @@ static int jz_nand_rs_correct_data(struct mtd_info *mtd, u_char *dat,
+ return 0;
+
+ if (status & EMC_NFINTS_UNCOR) {
+- printf("uncorrectable ecc\n");
++ printf("JZ4740 uncorrectable ECC\n");
+ return -1;
+ }
+
+@@ -230,6 +233,32 @@ static int jz_nand_rs_correct_data(struct mtd_info *mtd, u_char *dat,
+ return errcnt;
+ }
+
++#ifdef CONFIG_SPL_BUILD
++static void jz_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
++{
++ int i;
++ struct nand_chip *this = mtd->priv;
++
++#if (JZ4740_NANDBOOT_CFG == JZ4740_NANDBOOT_B16R3) || \
++ (JZ4740_NANDBOOT_CFG == JZ4740_NANDBOOT_B16R2)
++ for (i = 0; i < len; i += 2)
++ buf[i] = readw(this->IO_ADDR_R);
++#elif (JZ4740_NANDBOOT_CFG == JZ4740_NANDBOOT_B8R3) || \
++ (JZ4740_NANDBOOT_CFG == JZ4740_NANDBOOT_B8R2)
++ for (i = 0; i < len; i++)
++ buf[i] = readb(this->IO_ADDR_R);
++#else
++ #error JZ4740_NANDBOOT_CFG not defined or wrong
++#endif
++}
++
++static uint8_t jz_nand_read_byte(struct mtd_info *mtd)
++{
++ struct nand_chip *this = mtd->priv;
++ return readb(this->IO_ADDR_R);
++}
++#endif
++
+ /*
+ * Main initialization routine
+ */
+@@ -254,6 +283,10 @@ int board_nand_init(struct nand_chip *nand)
+ nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
+ nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
+ nand->ecc.layout = &qi_lb60_ecclayout_2gb;
++#ifdef CONFIG_SPL_BUILD
++ nand->read_byte = jz_nand_read_byte;
++ nand->read_buf = jz_nand_read_buf;
++#endif
+ nand->chip_delay = 50;
+ nand->options = NAND_USE_FLASH_BBT;
+
+diff --git a/include/configs/qi_lb60.h b/include/configs/qi_lb60.h
+index 4bb5bbc..7bff444 100644
+--- a/include/configs/qi_lb60.h
++++ b/include/configs/qi_lb60.h
+@@ -1,5 +1,5 @@
+ /*
+- * Authors: Xiangfu Liu <xiangfu.z@gmail.com>
++ * Authors: Xiangfu Liu <xiangfu@openmobilefree.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+@@ -14,7 +14,6 @@
+ #define CONFIG_SYS_LITTLE_ENDIAN
+ #define CONFIG_JZSOC /* Jz SoC */
+ #define CONFIG_JZ4740 /* Jz4740 SoC */
+-#define CONFIG_NAND_JZ4740
+
+ #define CONFIG_SYS_CPU_SPEED 336000000 /* CPU clock: 336 MHz */
+ #define CONFIG_SYS_EXTAL 12000000 /* EXTAL freq: 12 MHz */
+@@ -24,24 +23,43 @@
+ #define CONFIG_SYS_UART_BASE JZ4740_UART0_BASE /* Base of the UART channel */
+ #define CONFIG_BAUDRATE 57600
+
++#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAUL)
++#define CONFIG_BOOTDELAY 0
++#define CONFIG_BOOTARGS "mem=32M console=tty0 console=ttyS0,57600n8 ubi.mtd=2 rootfstype=ubifs root=ubi0:rootfs rw rootwait"
++#define CONFIG_BOOTCOMMAND "nand read 0x80600000 0x400000 0x280000;bootm"
++
++/*
++ * Miscellaneous configurable options
++ */
++#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
++#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
++#define CONFIG_SYS_LOAD_ADDR 0x80600000
++#define CONFIG_SYS_MEMTEST_START 0x80100000
++#define CONFIG_SYS_MEMTEST_END 0x80A00000
++#define CONFIG_SYS_TEXT_BASE 0x80100000
++#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
++
++#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
++#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024)
++
++#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
++#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
++
++#define CONFIG_SYS_LONGHELP
++#define CONFIG_SYS_MAXARGS 16
++#define CONFIG_SYS_PROMPT "NanoNote# "
++
+ #define CONFIG_SKIP_LOWLEVEL_INIT
+ #define CONFIG_BOARD_EARLY_INIT_F
+ #define CONFIG_SYS_NO_FLASH
+ #define CONFIG_SYS_FLASH_BASE 0 /* init flash_base as 0 */
+-#define CONFIG_ENV_OVERWRITE
+-
+-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAUL)
+-#define CONFIG_BOOTDELAY 0
+-#define CONFIG_BOOTARGS "mem=32M console=tty0 console=ttyS0,57600n8 ubi.mtd=2 rootfstype=ubifs root=ubi0:rootfs rw rootwait"
+-#define CONFIG_BOOTCOMMAND "nand read 0x80600000 0x400000 0x200000;bootm"
+
+ /*
+- * Command line configuration.
++ * Command line configuration
+ */
+ #define CONFIG_CMD_BOOTD /* bootd */
+ #define CONFIG_CMD_CONSOLE /* coninfo */
+ #define CONFIG_CMD_ECHO /* echo arguments */
+-
+ #define CONFIG_CMD_LOADB /* loadb */
+ #define CONFIG_CMD_LOADS /* loads */
+ #define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */
+@@ -58,45 +76,16 @@
+ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+
+ /*
+- * Miscellaneous configurable options
+- */
+-#define CONFIG_SYS_MAXARGS 16
+-#define CONFIG_SYS_LONGHELP
+-#define CONFIG_SYS_PROMPT "NanoNote# "
+-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+-
+-#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
+-#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024)
+-
+-#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
+-#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
+-#define CONFIG_SYS_LOAD_ADDR 0x80600000
+-#define CONFIG_SYS_MEMTEST_START 0x80100000
+-#define CONFIG_SYS_MEMTEST_END 0x80800000
+-
+-/*
+- * Environment
++ * NAND driver configuration
+ */
+-#define CONFIG_ENV_IS_IN_NAND /* use NAND for environment vars */
+-
+-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+-/*
+- * if board nand flash is 1GB, set to 1
+- * if board nand flash is 2GB, set to 2
+- * for change the PAGE_SIZE and BLOCK_SIZE
+- * will delete when there is no 1GB flash
+- */
+-#define NANONOTE_NAND_SIZE 2
+-
+-#define CONFIG_SYS_NAND_PAGE_SIZE (2048 * NANONOTE_NAND_SIZE)
+-#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * NANONOTE_NAND_SIZE << 10)
+-/* nand bad block was marked at this page in a block, start from 0 */
++#define CONFIG_NAND_JZ4740
++#define CONFIG_SYS_NAND_PAGE_SIZE 4096
++#define CONFIG_SYS_NAND_BLOCK_SIZE (512 << 10)
++/* NAND bad block was marked at this page in a block, start from 0 */
+ #define CONFIG_SYS_NAND_BADBLOCK_PAGE 127
+ #define CONFIG_SYS_NAND_PAGE_COUNT 128
+ #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
+-/* ECC offset position in oob area, default value is 6 if it isn't defined */
+-#define CONFIG_SYS_NAND_ECC_POS (6 * NANONOTE_NAND_SIZE)
++#define CONFIG_SYS_NAND_ECC_POS 12
+ #define CONFIG_SYS_NAND_ECCSIZE 512
+ #define CONFIG_SYS_NAND_ECCBYTES 9
+ #define CONFIG_SYS_NAND_ECCPOS \
+@@ -115,10 +104,9 @@
+ #define CONFIG_SYS_ONENAND_BASE CONFIG_SYS_NAND_BASE
+ #define CONFIG_SYS_MAX_NAND_DEVICE 1
+ #define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl.*/
+-#define CONFIG_NAND_SPL_TEXT_BASE 0x80000000
+
+ /*
+- * IPL (Initial Program Loader, integrated inside CPU)
++ * IPL (Initial Program Loader, integrated inside Ingenic Xburst JZ4740 CPU)
+ * Will load first 8k from NAND (SPL) into cache and execute it from there.
+ *
+ * SPL (Secondary Program Loader)
+@@ -130,77 +118,88 @@
+ * NUB (NAND U-Boot)
+ * This NAND U-Boot (NUB) is a special U-Boot version which can be started
+ * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
+- *
+ */
++
++/*
++ * NAND SPL configuration
++ */
++#define CONFIG_SPL
++#define CONFIG_SPL_LIBGENERIC_SUPPORT
++#define CONFIG_SPL_LIBCOMMON_SUPPORT
++#define CONFIG_SPL_NAND_LOAD
++#define CONFIG_SPL_NAND_SIMPLE
++#define CONFIG_SPL_NAND_SUPPORT
++#define CONFIG_SPL_TEXT_BASE 0x80000000
++#define CONFIG_SPL_START_S_PATH "arch/mips/cpu/xburst/spl"
++
++#define CONFIG_SYS_NAND_5_ADDR_CYCLE
++#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
++#define JZ4740_NANDBOOT_CFG JZ4740_NANDBOOT_B8R3
++
+ #define CONFIG_SYS_NAND_U_BOOT_DST 0x80100000 /* Load NUB to this addr */
+ #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
+-/* Start NUB from this addr*/
++ /* Start NUB from this addr */
++#define CONFIG_SYS_NAND_U_BOOT_OFFS (32 << 10) /* Offset of NUB */
++#define CONFIG_SYS_NAND_U_BOOT_SIZE (256 << 10) /* Size of NUB */
+
+ /*
+- * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
++ * Environment configuration
+ */
+-#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) /* Offset to RAM U-Boot image */
+-#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) /* Size of RAM U-Boot image */
+-
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_IS_IN_NAND
+ #define CONFIG_ENV_SIZE (4 << 10)
+ #define CONFIG_ENV_OFFSET \
+ (CONFIG_SYS_NAND_BLOCK_SIZE + CONFIG_SYS_NAND_U_BOOT_SIZE)
+ #define CONFIG_ENV_OFFSET_REDUND \
+ (CONFIG_ENV_OFFSET + CONFIG_SYS_NAND_BLOCK_SIZE)
+
+-#define CONFIG_SYS_TEXT_BASE 0x80100000
+-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+-
+ /*
+- * SDRAM Info.
++ * CPU cache configuration
+ */
+-#define CONFIG_NR_DRAM_BANKS 1
++#define CONFIG_SYS_DCACHE_SIZE 16384
++#define CONFIG_SYS_ICACHE_SIZE 16384
++#define CONFIG_SYS_CACHELINE_SIZE 32
+
+ /*
+- * Cache Configuration
++ * SDRAM configuration
+ */
+-#define CONFIG_SYS_DCACHE_SIZE 16384
+-#define CONFIG_SYS_ICACHE_SIZE 16384
+-#define CONFIG_SYS_CACHELINE_SIZE 32
++#define CONFIG_NR_DRAM_BANKS 1
++
++#define SDRAM_BW16 1 /* Data bus width: 0-32bit, 1-16bit */
++#define SDRAM_BANK4 1 /* Banks each chip: 0-2bank, 1-4bank */
++#define SDRAM_ROW 13 /* Row address: 11 to 13 */
++#define SDRAM_COL 9 /* Column address: 8 to 12 */
++#define SDRAM_CASL 2 /* CAS latency: 2 or 3 */
++#define SDRAM_TRAS 45 /* RAS# Active Time */
++#define SDRAM_RCD 20 /* RAS# to CAS# Delay */
++#define SDRAM_TPC 20 /* RAS# Precharge Time */
++#define SDRAM_TRWL 7 /* Write Latency Time */
++#define SDRAM_TREF 15625 /* Refresh period: 8192 cycles/64ms */
+
+ /*
+- * GPIO definition
++ * GPIO configuration
+ */
+-#define GPIO_LCD_CS (2 * 32 + 21)
+-#define GPIO_AMP_EN (3 * 32 + 4)
++#define GPIO_LCD_CS (2 * 32 + 21)
++#define GPIO_AMP_EN (3 * 32 + 4)
+
+-#define GPIO_SDPW_EN (3 * 32 + 2)
+-#define GPIO_SD_DETECT (3 * 32 + 0)
++#define GPIO_SDPW_EN (3 * 32 + 2)
++#define GPIO_SD_DETECT (3 * 32 + 0)
+
+-#define GPIO_BUZZ_PWM (3 * 32 + 27)
+-#define GPIO_USB_DETECT (3 * 32 + 28)
++#define GPIO_BUZZ_PWM (3 * 32 + 27)
++#define GPIO_USB_DETECT (3 * 32 + 28)
+
+-#define GPIO_AUDIO_POP (1 * 32 + 29)
+-#define GPIO_COB_TEST (1 * 32 + 30)
++#define GPIO_AUDIO_POP (1 * 32 + 29)
++#define GPIO_COB_TEST (1 * 32 + 30)
+
+ #define GPIO_KEYOUT_BASE (2 * 32 + 10)
+-#define GPIO_KEYIN_BASE (3 * 32 + 18)
+-#define GPIO_KEYIN_8 (3 * 32 + 26)
++#define GPIO_KEYIN_BASE (3 * 32 + 18)
++#define GPIO_KEYIN_8 (3 * 32 + 26)
+
+-#define GPIO_SD_CD_N GPIO_SD_DETECT /* SD Card insert detect */
++#define GPIO_SD_CD_N GPIO_SD_DETECT /* SD Card insert detect */
+ #define GPIO_SD_VCC_EN_N GPIO_SDPW_EN /* SD Card Power Enable */
+
+ #define SPEN GPIO_LCD_CS /* LCDCS :Serial command enable */
+ #define SPDA (2 * 32 + 22) /* LCDSCL:Serial command clock input */
+ #define SPCK (2 * 32 + 23) /* LCDSDA:Serial command data input */
+
+-/* SDRAM paramters */
+-#define SDRAM_BW16 1 /* Data bus width: 0-32bit, 1-16bit */
+-#define SDRAM_BANK4 1 /* Banks each chip: 0-2bank, 1-4bank */
+-#define SDRAM_ROW 13 /* Row address: 11 to 13 */
+-#define SDRAM_COL 9 /* Column address: 8 to 12 */
+-#define SDRAM_CASL 2 /* CAS latency: 2 or 3 */
+-
+-/* SDRAM Timings, unit: ns */
+-#define SDRAM_TRAS 45 /* RAS# Active Time */
+-#define SDRAM_RCD 20 /* RAS# to CAS# Delay */
+-#define SDRAM_TPC 20 /* RAS# Precharge Time */
+-#define SDRAM_TRWL 7 /* Write Latency Time */
+-#define SDRAM_TREF 15625 /* Refresh period: 8192 cycles/64ms */
+-
+ #endif
+--
+1.7.9.5
+
diff --git a/package/boot/uboot-xburst/patches/0002-qi_lb60-add-software-usbboot-support.patch b/package/boot/uboot-xburst/patches/0002-qi_lb60-add-software-usbboot-support.patch
new file mode 100644
index 0000000..feaf297
--- /dev/null
+++ b/package/boot/uboot-xburst/patches/0002-qi_lb60-add-software-usbboot-support.patch
@@ -0,0 +1,916 @@
+From fa51192b912d296b8eec10f7d44c6c17eb1dd368 Mon Sep 17 00:00:00 2001
+From: Xiangfu <xiangfu@openmobilefree.net>
+Date: Fri, 12 Oct 2012 09:47:39 +0800
+Subject: [PATCH 2/6] qi_lb60: add software usbboot support
+
+ JZ4740 CPU have a internal ROM have such kind of code, that make
+ JZ4740 can boot from USB
+
+ usbboot.S can downloads user program from the USB port to internal
+ SRAM and branches to the internal SRAM to execute the program
+
+Signed-off-by: Xiangfu <xiangfu@openmobilefree.net>
+---
+ board/qi/qi_lb60/Makefile | 1 +
+ board/qi/qi_lb60/qi_lb60-spl.c | 20 +
+ board/qi/qi_lb60/usbboot.S | 838 ++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 859 insertions(+)
+ create mode 100644 board/qi/qi_lb60/usbboot.S
+
+diff --git a/board/qi/qi_lb60/Makefile b/board/qi/qi_lb60/Makefile
+index e399246..6dd8c6f 100644
+--- a/board/qi/qi_lb60/Makefile
++++ b/board/qi/qi_lb60/Makefile
+@@ -23,6 +23,7 @@ include $(TOPDIR)/config.mk
+ LIB = $(obj)lib$(BOARD).o
+
+ ifeq ($(CONFIG_SPL_BUILD),y)
++SOBJS := usbboot.o
+ COBJS := $(BOARD)-spl.o
+ else
+ COBJS := $(BOARD).o
+diff --git a/board/qi/qi_lb60/qi_lb60-spl.c b/board/qi/qi_lb60/qi_lb60-spl.c
+index 3fe3fa3..aea459c 100644
+--- a/board/qi/qi_lb60/qi_lb60-spl.c
++++ b/board/qi/qi_lb60/qi_lb60-spl.c
+@@ -12,6 +12,24 @@
+ #include <asm/io.h>
+ #include <asm/jz4740.h>
+
++#define KEY_U_OUT (32 * 2 + 16)
++#define KEY_U_IN (32 * 3 + 19)
++
++extern void usb_boot(void);
++
++static void check_usb_boot(void)
++{
++ __gpio_as_input(KEY_U_IN);
++ __gpio_enable_pull(KEY_U_IN);
++ __gpio_as_output(KEY_U_OUT);
++ __gpio_clear_pin(KEY_U_OUT);
++
++ if (!__gpio_get_pin(KEY_U_IN)) {
++ puts("[U] pressed, goto USBBOOT mode\n");
++ usb_boot();
++ }
++}
++
+ void nand_spl_boot(void)
+ {
+ __gpio_as_sdram_16bit_4720();
+@@ -23,6 +41,8 @@ void nand_spl_boot(void)
+ pll_init();
+ sdram_init();
+
++ check_usb_boot();
++
+ nand_init();
+
+ puts("\nQi LB60 SPL: Starting U-Boot ...\n");
+diff --git a/board/qi/qi_lb60/usbboot.S b/board/qi/qi_lb60/usbboot.S
+new file mode 100644
+index 0000000..c872266
+--- /dev/null
++++ b/board/qi/qi_lb60/usbboot.S
+@@ -0,0 +1,838 @@
++/*
++ * for jz4740 usb boot
++ *
++ * Copyright (c) 2009 Author: <jlwei@ingenic.cn>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++ .set noreorder
++ .globl usb_boot
++ .text
++
++/*
++ * Both NAND and USB boot load data to D-Cache first, then transfer
++ * data from D-Cache to I-Cache, and jump to execute the code in I-Cache.
++ * So init caches first and then dispatch to a proper boot routine.
++ */
++
++.macro load_addr reg addr
++ li \reg, 0x80000000
++ addiu \reg, \reg, \addr
++ la $2, usbboot_begin
++ subu \reg, \reg, $2
++.endm
++
++usb_boot:
++ /* Initialize PLL: set ICLK to 84MHz and HCLK to 42MHz. */
++ la $9, 0xB0000000 /* CPCCR: Clock Control Register */
++ la $8, 0x42041110 /* I:S:M:P=1:2:2:2 */
++ sw $8, 0($9)
++
++ la $9, 0xB0000010 /* CPPCR: PLL Control Register */
++ la $8, 0x06000120 /* M=12 N=0 D=0 CLK=12*(M+2)/(N+2) */
++ sw $8, 0($9)
++
++ mtc0 $0, $26 /* CP0_ERRCTL, restore WST reset state */
++ nop
++
++ mtc0 $0, $16 /* CP0_CONFIG */
++ nop
++
++ /* Relocate code to beginning of the ram */
++
++ la $2, usbboot_begin
++ la $3, usbboot_end
++ li $4, 0x80000000
++
++1:
++ lw $5, 0($2)
++ sw $5, 0($4)
++ addiu $2, $2, 4
++ bne $2, $3, 1b
++ addiu $4, $4, 4
++
++ li $2, 0x80000000
++ ori $3, $2, 0
++ addiu $3, $3, usbboot_end
++ la $4, usbboot_begin
++ subu $3, $3, $4
++
++
++2:
++ cache 0x0, 0($2) /* Index_Invalidate_I */
++ cache 0x1, 0($2) /* Index_Writeback_Inv_D */
++ addiu $2, $2, 32
++ subu $4, $3, $2
++ bgtz $4, 2b
++ nop
++
++ load_addr $3, usb_boot_return
++
++ jr $3
++
++usbboot_begin:
++
++init_caches:
++ li $2, 3 /* cacheable for kseg0 access */
++ mtc0 $2, $16 /* CP0_CONFIG */
++ nop
++
++ li $2, 0x20000000 /* enable idx-store-data cache insn */
++ mtc0 $2, $26 /* CP0_ERRCTL */
++
++ ori $2, $28, 0 /* start address */
++ ori $3, $2, 0x3fe0 /* end address, total 16KB */
++ mtc0 $0, $28, 0 /* CP0_TAGLO */
++ mtc0 $0, $28, 1 /* CP0_DATALO */
++cache_clear_a_line:
++ cache 0x8, 0($2) /* Index_Store_Tag_I */
++ cache 0x9, 0($2) /* Index_Store_Tag_D */
++ bne $2, $3, cache_clear_a_line
++ addiu $2, $2, 32 /* increment CACHE_LINE_SIZE */
++
++ ori $2, $28, 0 /* start address */
++ ori $3, $2, 0x3fe0 /* end address, total 16KB */
++ la $4, 0x1ffff000 /* physical address and 4KB page mask */
++cache_alloc_a_line:
++ and $5, $2, $4
++ ori $5, $5, 1 /* V bit of the physical tag */
++ mtc0 $5, $28, 0 /* CP0_TAGLO */
++ cache 0x8, 0($2) /* Index_Store_Tag_I */
++ cache 0x9, 0($2) /* Index_Store_Tag_D */
++ bne $2, $3, cache_alloc_a_line
++ addiu $2, $2, 32 /* increment CACHE_LINE_SIZE */
++
++ nop
++ nop
++ nop
++ /*
++ * Transfer data from dcache to icache, then jump to icache.
++ * Input parameters:
++ * $19: data length in bytes
++ * $20: jump target address
++ */
++xfer_d2i:
++
++ ori $8, $20, 0
++ addu $9, $8, $19 /* total 16KB */
++
++1:
++ cache 0x0, 0($8) /* Index_Invalidate_I */
++ cache 0x1, 0($8) /* Index_Writeback_Inv_D */
++ bne $8, $9, 1b
++ addiu $8, $8, 32
++
++ /* flush write-buffer */
++ sync
++
++ /* Invalidate BTB */
++ mfc0 $8, $16, 7 /* CP0_CONFIG */
++ nop
++ ori $8, 2
++ mtc0 $8, $16, 7
++ nop
++
++ /* Overwrite config to disable ram initalisation */
++ li $2, 0xff
++ sb $2, 20($20)
++
++ jalr $20
++ nop
++
++icache_return:
++ /* User code can return to here after executing itself in
++ icache, by jumping to $31. */
++ b usb_boot_return
++ nop
++
++
++usb_boot_return:
++ /* Enable the USB PHY */
++ la $9, 0xB0000024 /* CPM_SCR */
++ lw $8, 0($9)
++ ori $8, 0x40 /* USBPHY_ENABLE */
++ sw $8, 0($9)
++
++ /* Initialize USB registers */
++ la $27, 0xb3040000 /* USB registers base address */
++
++ sb $0, 0x0b($27) /* INTRUSBE: disable common USB interrupts */
++ sh $0, 0x06($27) /* INTRINE: disable EPIN interrutps */
++ sh $0, 0x08($27) /* INTROUTE: disable EPOUT interrutps */
++
++ li $9, 0x61
++ sb $9, 0x01($27) /* POWER: HSENAB | SUSPENDM | SOFTCONN */
++
++ /* Initialize USB states */
++ li $22, 0 /* set EP0 to IDLE state */
++ li $23, 1 /* no data stage */
++
++ /* Main loop of polling the usb commands */
++usb_command_loop:
++ lbu $9, 0x0a($27) /* read INTRUSB */
++ andi $9, 0x04 /* check USB_INTR_RESET */
++ beqz $9, check_intr_ep0in
++ nop
++
++ /* 1. Handle USB reset interrupt */
++handle_reset_intr:
++ lbu $9, 0x01($27) /* read POWER */
++ andi $9, 0x10 /* test HS_MODE */
++ bnez $9, _usb_set_maxpktsize
++ li $9, 512 /* max packet size of HS mode */
++ li $9, 64 /* max packet size of FS mode */
++
++_usb_set_maxpktsize:
++ li $8, 1
++ sb $8, 0x0e($27) /* set INDEX 1 */
++
++ sh $9, 0x10($27) /* INMAXP */
++ sb $0, 0x13($27) /* INCSRH */
++ sh $9, 0x14($27) /* OUTMAXP */
++ sb $0, 0x17($27) /* OUTCSRH */
++
++_usb_flush_fifo:
++ li $8, 0x48 /* INCSR_CDT && INCSR_FF */
++ sb $8, 0x12($27) /* INCSR */
++ li $8, 0x90 /* OUTCSR_CDT && OUTCSR_FF */
++ sb $8, 0x16($27) /* OUTCSR */
++
++ li $22, 0 /* set EP0 to IDLE state */
++ li $23, 1 /* no data stage */
++
++ /* 2. Check and handle EP0 interrupt */
++check_intr_ep0in:
++ lhu $10, 0x02($27) /* read INTRIN */
++ andi $9, $10, 0x1 /* check EP0 interrupt */
++ beqz $9, check_intr_ep1in
++ nop
++
++handle_ep0_intr:
++ sb $0, 0x0e($27) /* set INDEX 0 */
++ lbu $11, 0x12($27) /* read CSR0 */
++
++ andi $9, $11, 0x04 /* check SENTSTALL */
++ beqz $9, _ep0_setupend
++ nop
++
++_ep0_sentstall:
++ andi $9, $11, 0xdb
++ sb $9, 0x12($27) /* clear SENDSTALL and SENTSTALL */
++ li $22, 0 /* set EP0 to IDLE state */
++
++_ep0_setupend:
++ andi $9, $11, 0x10 /* check SETUPEND */
++ beqz $9, ep0_idle_state
++ nop
++
++ ori $9, $11, 0x80
++ sb $9, 0x12($27) /* set SVDSETUPEND */
++ li $22, 0 /* set EP0 to IDLE state */
++
++ep0_idle_state:
++ bnez $22, ep0_tx_state
++ nop
++
++ /* 2.1 Handle EP0 IDLE state interrupt */
++ andi $9, $11, 0x01 /* check OUTPKTRDY */
++ beqz $9, check_intr_ep1in
++ nop
++
++ /* Read 8-bytes setup packet from the FIFO */
++ lw $25, 0x20($27) /* first word of setup packet */
++ lw $26, 0x20($27) /* second word of setup packet */
++
++ andi $9, $25, 0x60 /* bRequestType & USB_TYPE_MASK */
++ beqz $9, _ep0_std_req
++ nop
++
++ /* 2.1.1 Vendor-specific setup request */
++_ep0_vend_req:
++ li $22, 0 /* set EP0 to IDLE state */
++ li $23, 1 /* NoData = 1 */
++
++ andi $9, $25, 0xff00 /* check bRequest */
++ srl $9, $9, 8
++ beqz $9, __ep0_get_cpu_info
++ sub $8, $9, 0x1
++ beqz $8, __ep0_set_data_address
++ sub $8, $9, 0x2
++ beqz $8, __ep0_set_data_length
++ sub $8, $9, 0x3
++ beqz $8, __ep0_flush_caches
++ sub $8, $9, 0x4
++ beqz $8, __ep0_prog_start1
++ sub $8, $9, 0x5
++ beqz $8, __ep0_prog_start2
++ nop
++ b _ep0_idle_state_fini /* invalid request */
++ nop
++
++__ep0_get_cpu_info:
++ load_addr $20, cpu_info_data /* data pointer to transfer */
++ li $21, 8 /* bytes left to transfer */
++ li $22, 1 /* set EP0 to TX state */
++ li $23, 0 /* NoData = 0 */
++
++ b _ep0_idle_state_fini
++ nop
++
++__ep0_set_data_address:
++ li $9, 0xffff0000
++ and $9, $25, $9
++ andi $8, $26, 0xffff
++ or $20, $9, $8 /* data address of next transfer */
++
++ b _ep0_idle_state_fini
++ nop
++
++__ep0_set_data_length:
++ li $9, 0xffff0000
++ and $9, $25, $9
++ andi $8, $26, 0xffff
++ or $21, $9, $8 /* data length of next transfer */
++
++ li $9, 0x48 /* SVDOUTPKTRDY and DATAEND */
++ sb $9, 0x12($27) /* CSR0 */
++
++ /* We must write packet to FIFO before EP1-IN interrupt here. */
++ b handle_epin1_intr
++ nop
++
++__ep0_flush_caches:
++ /* Flush dcache and invalidate icache. */
++ li $8, 0x80000000
++ addi $9, $8, 0x3fe0 /* total 16KB */
++
++1:
++ cache 0x0, 0($8) /* Index_Invalidate_I */
++ cache 0x1, 0($8) /* Index_Writeback_Inv_D */
++ bne $8, $9, 1b
++ addiu $8, $8, 32
++
++ /* flush write-buffer */
++ sync
++
++ /* Invalidate BTB */
++ mfc0 $8, $16, 7 /* CP0_CONFIG */
++ nop
++ ori $8, 2
++ mtc0 $8, $16, 7
++ nop
++
++ b _ep0_idle_state_fini
++ nop
++
++__ep0_prog_start1:
++ li $9, 0x48 /* SVDOUTPKTRDY and DATAEND */
++ sb $9, 0x12($27) /* CSR0 */
++
++ li $9, 0xffff0000
++ and $9, $25, $9
++ andi $8, $26, 0xffff
++ or $20, $9, $8 /* target address */
++
++ b xfer_d2i
++ li $19, 0x2000 /* 16KB data length */
++
++__ep0_prog_start2:
++ li $9, 0x48 /* SVDOUTPKTRDY and DATAEND */
++ sb $9, 0x12($27) /* CSR0 */
++
++ li $9, 0xffff0000
++ and $9, $25, $9
++ andi $8, $26, 0xffff
++ or $20, $9, $8 /* target address */
++
++ jalr $20 /* jump, and place the return address in $31 */
++ nop
++
++__ep0_prog_start2_return:
++/* User code can return to here after executing itself, by jumping to $31 */
++ b usb_boot_return
++ nop
++
++ /* 2.1.2 Standard setup request */
++_ep0_std_req:
++ andi $12, $25, 0xff00 /* check bRequest */
++ srl $12, $12, 8
++ sub $9, $12, 0x05 /* check USB_REQ_SET_ADDRESS */
++ bnez $9, __ep0_req_set_config
++ nop
++
++ /* Handle USB_REQ_SET_ADDRESS */
++__ep0_req_set_addr:
++ srl $9, $25, 16 /* get wValue */
++ sb $9, 0x0($27) /* set FADDR */
++ li $23, 1 /* NoData = 1 */
++ b _ep0_idle_state_fini
++ nop
++
++__ep0_req_set_config:
++ sub $9, $12, 0x09 /* check USB_REQ_SET_CONFIGURATION */
++ bnez $9, __ep0_req_get_desc
++ nop
++
++ /* Handle USB_REQ_SET_CONFIGURATION */
++ li $23, 1 /* NoData = 1 */
++ b _ep0_idle_state_fini
++ nop
++
++__ep0_req_get_desc:
++ sub $9, $12, 0x06 /* check USB_REQ_GET_DESCRIPTOR */
++ bnez $9, _ep0_idle_state_fini
++ li $23, 1 /* NoData = 1 */
++
++ /* Handle USB_REQ_GET_DESCRIPTOR */
++ li $23, 0 /* NoData = 0 */
++
++ srl $9, $25, 24 /* wValue >> 8 */
++ sub $8, $9, 0x01 /* check USB_DT_DEVICE */
++ beqz $8, ___ep0_get_dev_desc
++ srl $21, $26, 16 /* get wLength */
++ sub $8, $9, 0x02 /* check USB_DT_CONFIG */
++ beqz $8, ___ep0_get_conf_desc
++ sub $8, $9, 0x03 /* check USB_DT_STRING */
++ beqz $8, ___ep0_get_string_desc
++ sub $8, $9, 0x06 /* check USB_DT_DEVICE_QUALIFIER */
++ beqz $8, ___ep0_get_dev_qualifier
++ nop
++ b _ep0_idle_state_fini
++ nop
++
++___ep0_get_dev_desc:
++ load_addr $20, device_desc /* data pointer */
++ li $22, 1 /* set EP0 to TX state */
++ sub $8, $21, 18
++ blez $8, _ep0_idle_state_fini /* wLength <= 18 */
++ nop
++ li $21, 18 /* max length of device_desc */
++ b _ep0_idle_state_fini
++ nop
++
++___ep0_get_dev_qualifier:
++ load_addr $20, dev_qualifier /* data pointer */
++ li $22, 1 /* set EP0 to TX state */
++ sub $8, $21, 10
++ blez $8, _ep0_idle_state_fini /* wLength <= 10 */
++ nop
++ li $21, 10 /* max length of dev_qualifier */
++ b _ep0_idle_state_fini
++ nop
++
++___ep0_get_conf_desc:
++ load_addr $20, config_desc_fs /* data pointer of FS mode */
++ lbu $8, 0x01($27) /* read POWER */
++ andi $8, 0x10 /* test HS_MODE */
++ beqz $8, ___ep0_get_conf_desc2
++ nop
++ load_addr $20, config_desc_hs /* data pointer of HS mode */
++
++___ep0_get_conf_desc2:
++ li $22, 1 /* set EP0 to TX state */
++ sub $8, $21, 32
++ blez $8, _ep0_idle_state_fini /* wLength <= 32 */
++ nop
++ li $21, 32 /* max length of config_desc */
++ b _ep0_idle_state_fini
++ nop
++
++___ep0_get_string_desc:
++ li $22, 1 /* set EP0 to TX state */
++
++ srl $9, $25, 16 /* wValue & 0xff */
++ andi $9, 0xff
++
++ sub $8, $9, 1
++ beqz $8, ___ep0_get_string_manufacture
++ sub $8, $9, 2
++ beqz $8, ___ep0_get_string_product
++ nop
++
++___ep0_get_string_lang_ids:
++ load_addr $20, string_lang_ids /* data pointer */
++ b _ep0_idle_state_fini
++ li $21, 4 /* data length */
++
++___ep0_get_string_manufacture:
++ load_addr $20, string_manufacture /* data pointer */
++ b _ep0_idle_state_fini
++ li $21, 16 /* data length */
++
++___ep0_get_string_product:
++ load_addr $20, string_product /* data pointer */
++ b _ep0_idle_state_fini
++ li $21, 46 /* data length */
++
++_ep0_idle_state_fini:
++ li $9, 0x40 /* SVDOUTPKTRDY */
++ beqz $23, _ep0_idle_state_fini2
++ nop
++ ori $9, $9, 0x08 /* DATAEND */
++_ep0_idle_state_fini2:
++ sb $9, 0x12($27) /* CSR0 */
++ beqz $22, check_intr_ep1in
++ nop
++
++ /* 2.2 Handle EP0 TX state interrupt */
++ep0_tx_state:
++ sub $9, $22, 1
++ bnez $9, check_intr_ep1in
++ nop
++
++ sub $9, $21, 64 /* max packetsize */
++ blez $9, _ep0_tx_state2 /* data count <= 64 */
++ ori $19, $21, 0
++ li $19, 64
++
++_ep0_tx_state2:
++ beqz $19, _ep0_tx_state3 /* send ZLP */
++ ori $18, $19, 0 /* record bytes to be transferred */
++ sub $21, $21, $19 /* decrement data count */
++
++_ep0_fifo_write_loop:
++ lbu $9, 0($20) /* read data */
++ sb $9, 0x20($27) /* load FIFO */
++ sub $19, $19, 1 /* decrement counter */
++ bnez $19, _ep0_fifo_write_loop
++ addi $20, $20, 1 /* increment data pointer */
++
++ sub $9, $18, 64 /* max packetsize */
++ beqz $9, _ep0_tx_state4
++ nop
++
++_ep0_tx_state3:
++ /* transferred bytes < max packetsize */
++ li $9, 0x0a /* set INPKTRDY and DATAEND */
++ sb $9, 0x12($27) /* CSR0 */
++ li $22, 0 /* set EP0 to IDLE state */
++ b check_intr_ep1in
++ nop
++
++_ep0_tx_state4:
++ /* transferred bytes == max packetsize */
++ li $9, 0x02 /* set INPKTRDY */
++ sb $9, 0x12($27) /* CSR0 */
++ b check_intr_ep1in
++ nop
++
++ /* 3. Check and handle EP1 BULK-IN interrupt */
++check_intr_ep1in:
++ andi $9, $10, 0x2 /* check EP1 IN interrupt */
++ beqz $9, check_intr_ep1out
++ nop
++
++handle_epin1_intr:
++ li $9, 1
++ sb $9, 0x0e($27) /* set INDEX 1 */
++ lbu $9, 0x12($27) /* read INCSR */
++
++ andi $8, $9, 0x2 /* check INCSR_FFNOTEMPT */
++ bnez $8, _epin1_tx_state4
++ nop
++
++_epin1_write_fifo:
++ lhu $9, 0x10($27) /* get INMAXP */
++ sub $8, $21, $9
++ blez $8, _epin1_tx_state1 /* bytes left <= INMAXP */
++ ori $19, $21, 0
++ ori $19, $9, 0
++
++_epin1_tx_state1:
++ beqz $19, _epin1_tx_state4 /* No data */
++ nop
++
++ sub $21, $21, $19 /* decrement data count */
++
++ srl $5, $19, 2 /* # of word */
++ andi $6, $19, 0x3 /* # of byte */
++ beqz $5, _epin1_tx_state2
++ nop
++
++_epin1_fifo_write_word:
++ lw $9, 0($20) /* read data from source address */
++ sw $9, 0x24($27) /* write FIFO */
++ sub $5, $5, 1 /* decrement counter */
++ bnez $5, _epin1_fifo_write_word
++ addiu $20, $20, 4 /* increment dest address */
++
++_epin1_tx_state2:
++ beqz $6, _epin1_tx_state3
++ nop
++
++_epin1_fifo_write_byte:
++ lbu $9, 0($20) /* read data from source address */
++ sb $9, 0x24($27) /* write FIFO */
++ sub $6, $6, 1 /* decrement counter */
++ bnez $6, _epin1_fifo_write_byte
++ addiu $20, $20, 1 /* increment dest address */
++
++_epin1_tx_state3:
++ li $9, 0x1
++ sb $9, 0x12($27) /* INCSR, set INPKTRDY */
++
++_epin1_tx_state4:
++ /* 4. Check and handle EP1 BULK-OUT interrupt */
++check_intr_ep1out:
++ lhu $9, 0x04($27) /* read INTROUT */
++ andi $9, 0x2
++ beqz $9, check_status_next
++ nop
++
++handle_epout1_intr:
++ li $9, 1
++ sb $9, 0x0e($27) /* set INDEX 1 */
++
++ lbu $9, 0x16($27) /* read OUTCSR */
++ andi $9, 0x1 /* check OUTPKTRDY */
++ beqz $9, check_status_next
++ nop
++
++_epout1_read_fifo:
++ lhu $19, 0x18($27) /* read OUTCOUNT */
++ srl $5, $19, 2 /* # of word */
++ andi $6, $19, 0x3 /* # of byte */
++ beqz $5, _epout1_rx_state1
++ nop
++
++_epout1_fifo_read_word:
++ lw $9, 0x24($27) /* read FIFO */
++ sw $9, 0($20) /* store to dest address */
++ sub $5, $5, 1 /* decrement counter */
++ bnez $5, _epout1_fifo_read_word
++ addiu $20, $20, 4 /* increment dest address */
++
++_epout1_rx_state1:
++ beqz $6, _epout1_rx_state2
++ nop
++
++_epout1_fifo_read_byte:
++ lbu $9, 0x24($27) /* read FIFO */
++ sb $9, 0($20) /* store to dest address */
++ sub $6, $6, 1 /* decrement counter */
++ bnez $6, _epout1_fifo_read_byte
++ addiu $20, $20, 1 /* increment dest address */
++
++_epout1_rx_state2:
++ sb $0, 0x16($27) /* clear OUTPKTRDY */
++
++check_status_next:
++ b usb_command_loop
++ nop
++
++/* Device/Configuration/Interface/Endpoint/String Descriptors */
++
++ .align 2
++device_desc:
++ .byte 0x12 /* bLength */
++ .byte 0x01 /* bDescriptorType */
++ .byte 0x00 /* bcdUSB */
++ .byte 0x02 /* bcdUSB */
++ .byte 0x00 /* bDeviceClass */
++ .byte 0x00 /* bDeviceSubClass */
++ .byte 0x00 /* bDeviceProtocol */
++ .byte 0x40 /* bMaxPacketSize0 */
++ .byte 0x1a /* idVendor */
++ .byte 0x60 /* idVendor */
++ .byte 0x40 /* idProduct */
++ .byte 0x47 /* idProduct */
++ .byte 0x00 /* bcdDevice */
++ .byte 0x01 /* bcdDevice */
++ .byte 0x01 /* iManufacturer */
++ .byte 0x02 /* iProduct */
++ .byte 0x00 /* iSerialNumber */
++ .byte 0x01 /* bNumConfigurations */
++
++ .align 2
++dev_qualifier:
++ .byte 0x0a /* bLength */
++ .byte 0x06 /* bDescriptorType */
++ .byte 0x00 /* bcdUSB */
++ .byte 0x02 /* bcdUSB */
++ .byte 0x00 /* bDeviceClass */
++ .byte 0x00 /* bDeviceSubClass */
++ .byte 0x00 /* bDeviceProtocol */
++ .byte 0x40 /* bMaxPacketSize0 */
++ .byte 0x01 /* bNumConfigurations */
++ .byte 0x00 /* bRESERVED */
++
++ .align 2
++config_desc_hs:
++ .byte 0x09 /* bLength */
++ .byte 0x02 /* bDescriptorType */
++ .byte 0x20 /* wTotalLength */
++ .byte 0x00 /* wTotalLength */
++ .byte 0x01 /* bNumInterfaces */
++ .byte 0x01 /* bConfigurationValue */
++ .byte 0x00 /* iConfiguration */
++ .byte 0xc0 /* bmAttributes */
++ .byte 0x01 /* MaxPower */
++intf_desc_hs:
++ .byte 0x09 /* bLength */
++ .byte 0x04 /* bDescriptorType */
++ .byte 0x00 /* bInterfaceNumber */
++ .byte 0x00 /* bAlternateSetting */
++ .byte 0x02 /* bNumEndpoints */
++ .byte 0xff /* bInterfaceClass */
++ .byte 0x00 /* bInterfaceSubClass */
++ .byte 0x50 /* bInterfaceProtocol */
++ .byte 0x00 /* iInterface */
++ep1_desc_hs:
++ .byte 0x07 /* bLength */
++ .byte 0x05 /* bDescriptorType */
++ .byte 0x01 /* bEndpointAddress */
++ .byte 0x02 /* bmAttributes */
++ .byte 0x00 /* wMaxPacketSize */
++ .byte 0x02 /* wMaxPacketSize */
++ .byte 0x00 /* bInterval */
++ep2_desc_hs:
++ .byte 0x07 /* bLength */
++ .byte 0x05 /* bDescriptorType */
++ .byte 0x81 /* bEndpointAddress */
++ .byte 0x02 /* bmAttributes */
++ .byte 0x00 /* wMaxPacketSize */
++ .byte 0x02 /* wMaxPacketSize */
++ .byte 0x00 /* bInterval */
++
++ .align 2
++config_desc_fs:
++ .byte 0x09 /* bLength */
++ .byte 0x02 /* bDescriptorType */
++ .byte 0x20 /* wTotalLength */
++ .byte 0x00 /* wTotalLength */
++ .byte 0x01 /* bNumInterfaces */
++ .byte 0x01 /* bConfigurationValue */
++ .byte 0x00 /* iConfiguration */
++ .byte 0xc0 /* bmAttributes */
++ .byte 0x01 /* MaxPower */
++intf_desc_fs:
++ .byte 0x09 /* bLength */
++ .byte 0x04 /* bDescriptorType */
++ .byte 0x00 /* bInterfaceNumber */
++ .byte 0x00 /* bAlternateSetting */
++ .byte 0x02 /* bNumEndpoints */
++ .byte 0xff /* bInterfaceClass */
++ .byte 0x00 /* bInterfaceSubClass */
++ .byte 0x50 /* bInterfaceProtocol */
++ .byte 0x00 /* iInterface */
++ep1_desc_fs:
++ .byte 0x07 /* bLength */
++ .byte 0x05 /* bDescriptorType */
++ .byte 0x01 /* bEndpointAddress */
++ .byte 0x02 /* bmAttributes */
++ .byte 0x40 /* wMaxPacketSize */
++ .byte 0x00 /* wMaxPacketSize */
++ .byte 0x00 /* bInterval */
++ep2_desc_fs:
++ .byte 0x07 /* bLength */
++ .byte 0x05 /* bDescriptorType */
++ .byte 0x81 /* bEndpointAddress */
++ .byte 0x02 /* bmAttributes */
++ .byte 0x40 /* wMaxPacketSize */
++ .byte 0x00 /* wMaxPacketSize */
++ .byte 0x00 /* bInterval */
++
++ .align 2
++string_lang_ids:
++ .byte 0x04
++ .byte 0x03
++ .byte 0x09
++ .byte 0x04
++
++ .align 2
++string_manufacture:
++ .byte 0x10
++ .byte 0x03
++ .byte 0x49
++ .byte 0x00
++ .byte 0x6e
++ .byte 0x00
++ .byte 0x67
++ .byte 0x00
++ .byte 0x65
++ .byte 0x00
++ .byte 0x6e
++ .byte 0x00
++ .byte 0x69
++ .byte 0x00
++ .byte 0x63
++ .byte 0x00
++
++ .align 2
++string_product:
++ .byte 0x2e
++ .byte 0x03
++ .byte 0x4a
++ .byte 0x00
++ .byte 0x5a
++ .byte 0x00
++ .byte 0x34
++ .byte 0x00
++ .byte 0x37
++ .byte 0x00
++ .byte 0x34
++ .byte 0x00
++ .byte 0x30
++ .byte 0x00
++ .byte 0x20
++ .byte 0x00
++ .byte 0x55
++ .byte 0x00
++ .byte 0x53
++ .byte 0x00
++ .byte 0x42
++ .byte 0x00
++ .byte 0x20
++ .byte 0x00
++ .byte 0x42
++ .byte 0x00
++ .byte 0x6f
++ .byte 0x00
++ .byte 0x6f
++ .byte 0x00
++ .byte 0x74
++ .byte 0x00
++ .byte 0x20
++ .byte 0x00
++ .byte 0x44
++ .byte 0x00
++ .byte 0x65
++ .byte 0x00
++ .byte 0x76
++ .byte 0x00
++ .byte 0x69
++ .byte 0x00
++ .byte 0x63
++ .byte 0x00
++ .byte 0x65
++ .byte 0x00
++
++ .align 2
++cpu_info_data:
++ .byte 0x4a
++ .byte 0x5a
++ .byte 0x34
++ .byte 0x37
++ .byte 0x34
++ .byte 0x30
++ .byte 0x56
++ .byte 0x31
++usbboot_end:
++
++ .set reorder
+--
+1.7.9.5
+
diff --git a/package/boot/uboot-xburst/patches/0003-add-mmc-support.patch b/package/boot/uboot-xburst/patches/0003-add-mmc-support.patch
new file mode 100644
index 0000000..e9baa7c
--- /dev/null
+++ b/package/boot/uboot-xburst/patches/0003-add-mmc-support.patch
@@ -0,0 +1,1664 @@
+From bd36739e77669e8df45c38f6acfe2cea511534d9 Mon Sep 17 00:00:00 2001
+From: Xiangfu <xiangfu@openmobilefree.net>
+Date: Wed, 10 Oct 2012 18:19:41 +0800
+Subject: [PATCH 3/6] add mmc support
+
+---
+ arch/mips/include/asm/jz4740.h | 166 ++++++
+ board/qi/qi_lb60/qi_lb60.c | 9 +-
+ drivers/mmc/Makefile | 1 +
+ drivers/mmc/jz_mmc.c | 1179 ++++++++++++++++++++++++++++++++++++++++
+ drivers/mmc/jz_mmc.h | 176 ++++++
+ include/configs/qi_lb60.h | 9 +
+ include/mmc.h | 40 ++
+ 7 files changed, 1578 insertions(+), 2 deletions(-)
+ create mode 100644 drivers/mmc/jz_mmc.c
+ create mode 100644 drivers/mmc/jz_mmc.h
+
+diff --git a/arch/mips/include/asm/jz4740.h b/arch/mips/include/asm/jz4740.h
+index 7a7cfff..68287fb 100644
+--- a/arch/mips/include/asm/jz4740.h
++++ b/arch/mips/include/asm/jz4740.h
+@@ -1146,5 +1146,171 @@ extern void sdram_init(void);
+ extern void calc_clocks(void);
+ extern void rtc_init(void);
+
++/*************************************************************************
++ * MSC
++ *************************************************************************/
++#define REG8(addr) *((volatile u8 *)(addr))
++#define REG16(addr) *((volatile u16 *)(addr))
++#define REG32(addr) *((volatile u32 *)(addr))
++
++#define CPM_BASE 0xB0000000
++#define CPM_CPCCR (CPM_BASE+0x00)
++#define CPM_MSCCDR (CPM_BASE+0x68)
++#define REG_CPM_MSCCDR REG32(CPM_MSCCDR)
++#define REG_CPM_CPCCR REG32(CPM_CPCCR)
++
++#define MSC_BASE 0xB0021000
++
++#define MSC_STRPCL (MSC_BASE + 0x000)
++#define MSC_STAT (MSC_BASE + 0x004)
++#define MSC_CLKRT (MSC_BASE + 0x008)
++#define MSC_CMDAT (MSC_BASE + 0x00C)
++#define MSC_RESTO (MSC_BASE + 0x010)
++#define MSC_RDTO (MSC_BASE + 0x014)
++#define MSC_BLKLEN (MSC_BASE + 0x018)
++#define MSC_NOB (MSC_BASE + 0x01C)
++#define MSC_SNOB (MSC_BASE + 0x020)
++#define MSC_IMASK (MSC_BASE + 0x024)
++#define MSC_IREG (MSC_BASE + 0x028)
++#define MSC_CMD (MSC_BASE + 0x02C)
++#define MSC_ARG (MSC_BASE + 0x030)
++#define MSC_RES (MSC_BASE + 0x034)
++#define MSC_RXFIFO (MSC_BASE + 0x038)
++#define MSC_TXFIFO (MSC_BASE + 0x03C)
++
++#define REG_MSC_STRPCL REG16(MSC_STRPCL)
++#define REG_MSC_STAT REG32(MSC_STAT)
++#define REG_MSC_CLKRT REG16(MSC_CLKRT)
++#define REG_MSC_CMDAT REG32(MSC_CMDAT)
++#define REG_MSC_RESTO REG16(MSC_RESTO)
++#define REG_MSC_RDTO REG16(MSC_RDTO)
++#define REG_MSC_BLKLEN REG16(MSC_BLKLEN)
++#define REG_MSC_NOB REG16(MSC_NOB)
++#define REG_MSC_SNOB REG16(MSC_SNOB)
++#define REG_MSC_IMASK REG16(MSC_IMASK)
++#define REG_MSC_IREG REG16(MSC_IREG)
++#define REG_MSC_CMD REG8(MSC_CMD)
++#define REG_MSC_ARG REG32(MSC_ARG)
++#define REG_MSC_RES REG16(MSC_RES)
++#define REG_MSC_RXFIFO REG32(MSC_RXFIFO)
++#define REG_MSC_TXFIFO REG32(MSC_TXFIFO)
++
++/* MSC Clock and Control Register (MSC_STRPCL) */
++
++#define MSC_STRPCL_EXIT_MULTIPLE (1 << 7)
++#define MSC_STRPCL_EXIT_TRANSFER (1 << 6)
++#define MSC_STRPCL_START_READWAIT (1 << 5)
++#define MSC_STRPCL_STOP_READWAIT (1 << 4)
++#define MSC_STRPCL_RESET (1 << 3)
++#define MSC_STRPCL_START_OP (1 << 2)
++#define MSC_STRPCL_CLOCK_CONTROL_BIT 0
++#define MSC_STRPCL_CLOCK_CONTROL_MASK (0x3 << MSC_STRPCL_CLOCK_CONTROL_BIT)
++ #define MSC_STRPCL_CLOCK_CONTROL_STOP (0x1 << MSC_STRPCL_CLOCK_CONTROL_BIT) /* Stop MMC/SD clock */
++ #define MSC_STRPCL_CLOCK_CONTROL_START (0x2 << MSC_STRPCL_CLOCK_CONTROL_BIT) /* Start MMC/SD clock */
++
++/* MSC Status Register (MSC_STAT) */
++
++#define MSC_STAT_IS_RESETTING (1 << 15)
++#define MSC_STAT_SDIO_INT_ACTIVE (1 << 14)
++#define MSC_STAT_PRG_DONE (1 << 13)
++#define MSC_STAT_DATA_TRAN_DONE (1 << 12)
++#define MSC_STAT_END_CMD_RES (1 << 11)
++#define MSC_STAT_DATA_FIFO_AFULL (1 << 10)
++#define MSC_STAT_IS_READWAIT (1 << 9)
++#define MSC_STAT_CLK_EN (1 << 8)
++#define MSC_STAT_DATA_FIFO_FULL (1 << 7)
++#define MSC_STAT_DATA_FIFO_EMPTY (1 << 6)
++#define MSC_STAT_CRC_RES_ERR (1 << 5)
++#define MSC_STAT_CRC_READ_ERROR (1 << 4)
++#define MSC_STAT_CRC_WRITE_ERROR_BIT 2
++#define MSC_STAT_CRC_WRITE_ERROR_MASK (0x3 << MSC_STAT_CRC_WRITE_ERROR_BIT)
++ #define MSC_STAT_CRC_WRITE_ERROR_NO (0 << MSC_STAT_CRC_WRITE_ERROR_BIT) /* No error on transmission of data */
++ #define MSC_STAT_CRC_WRITE_ERROR (1 << MSC_STAT_CRC_WRITE_ERROR_BIT) /* Card observed erroneous transmission of data */
++ #define MSC_STAT_CRC_WRITE_ERROR_NOSTS (2 << MSC_STAT_CRC_WRITE_ERROR_BIT) /* No CRC status is sent back */
++#define MSC_STAT_TIME_OUT_RES (1 << 1)
++#define MSC_STAT_TIME_OUT_READ (1 << 0)
++
++/* MSC Bus Clock Control Register (MSC_CLKRT) */
++
++#define MSC_CLKRT_CLK_RATE_BIT 0
++#define MSC_CLKRT_CLK_RATE_MASK (0x7 << MSC_CLKRT_CLK_RATE_BIT)
++ #define MSC_CLKRT_CLK_RATE_DIV_1 (0x0 << MSC_CLKRT_CLK_RATE_BIT) /* CLK_SRC */
++ #define MSC_CLKRT_CLK_RATE_DIV_2 (0x1 << MSC_CLKRT_CLK_RATE_BIT) /* 1/2 of CLK_SRC */
++ #define MSC_CLKRT_CLK_RATE_DIV_4 (0x2 << MSC_CLKRT_CLK_RATE_BIT) /* 1/4 of CLK_SRC */
++ #define MSC_CLKRT_CLK_RATE_DIV_8 (0x3 << MSC_CLKRT_CLK_RATE_BIT) /* 1/8 of CLK_SRC */
++ #define MSC_CLKRT_CLK_RATE_DIV_16 (0x4 << MSC_CLKRT_CLK_RATE_BIT) /* 1/16 of CLK_SRC */
++ #define MSC_CLKRT_CLK_RATE_DIV_32 (0x5 << MSC_CLKRT_CLK_RATE_BIT) /* 1/32 of CLK_SRC */
++ #define MSC_CLKRT_CLK_RATE_DIV_64 (0x6 << MSC_CLKRT_CLK_RATE_BIT) /* 1/64 of CLK_SRC */
++ #define MSC_CLKRT_CLK_RATE_DIV_128 (0x7 << MSC_CLKRT_CLK_RATE_BIT) /* 1/128 of CLK_SRC */
++
++/* MSC Command Sequence Control Register (MSC_CMDAT) */
++
++#define MSC_CMDAT_IO_ABORT (1 << 11)
++#define MSC_CMDAT_BUS_WIDTH_BIT 9
++#define MSC_CMDAT_BUS_WIDTH_MASK (0x3 << MSC_CMDAT_BUS_WIDTH_BIT)
++#define MSC_CMDAT_BUS_WIDTH_1BIT (0x0 << MSC_CMDAT_BUS_WIDTH_BIT)
++#define MSC_CMDAT_BUS_WIDTH_4BIT (0x2 << MSC_CMDAT_BUS_WIDTH_BIT)
++#define MSC_CMDAT_DMA_EN (1 << 8)
++#define MSC_CMDAT_INIT (1 << 7)
++#define MSC_CMDAT_BUSY (1 << 6)
++#define MSC_CMDAT_STREAM_BLOCK (1 << 5)
++#define MSC_CMDAT_WRITE (1 << 4)
++#define MSC_CMDAT_READ (0 << 4)
++#define MSC_CMDAT_DATA_EN (1 << 3)
++#define MSC_CMDAT_RESPONSE_BIT 0
++#define MSC_CMDAT_RESPONSE_MASK (0x7 << MSC_CMDAT_RESPONSE_BIT)
++#define MSC_CMDAT_RESPONSE_NONE (0x0 << MSC_CMDAT_RESPONSE_BIT)
++#define MSC_CMDAT_RESPONSE_R1 (0x1 << MSC_CMDAT_RESPONSE_BIT)
++#define MSC_CMDAT_RESPONSE_R2 (0x2 << MSC_CMDAT_RESPONSE_BIT)
++#define MSC_CMDAT_RESPONSE_R3 (0x3 << MSC_CMDAT_RESPONSE_BIT)
++#define MSC_CMDAT_RESPONSE_R4 (0x4 << MSC_CMDAT_RESPONSE_BIT)
++#define MSC_CMDAT_RESPONSE_R5 (0x5 << MSC_CMDAT_RESPONSE_BIT)
++#define MSC_CMDAT_RESPONSE_R6 (0x6 << MSC_CMDAT_RESPONSE_BIT)
++
++/* MSC Interrupts Mask Register (MSC_IMASK) */
++#define MSC_IMASK_SDIO (1 << 7)
++#define MSC_IMASK_TXFIFO_WR_REQ (1 << 6)
++#define MSC_IMASK_RXFIFO_RD_REQ (1 << 5)
++#define MSC_IMASK_END_CMD_RES (1 << 2)
++#define MSC_IMASK_PRG_DONE (1 << 1)
++#define MSC_IMASK_DATA_TRAN_DONE (1 << 0)
++
++
++/* MSC Interrupts Status Register (MSC_IREG) */
++#define MSC_IREG_SDIO (1 << 7)
++#define MSC_IREG_TXFIFO_WR_REQ (1 << 6)
++#define MSC_IREG_RXFIFO_RD_REQ (1 << 5)
++#define MSC_IREG_END_CMD_RES (1 << 2)
++#define MSC_IREG_PRG_DONE (1 << 1)
++#define MSC_IREG_DATA_TRAN_DONE (1 << 0)
++
++static __inline__ unsigned int __cpm_get_pllout2(void)
++{
++ if (REG_CPM_CPCCR & CPM_CPCCR_PCS)
++ return __cpm_get_pllout();
++ else
++ return __cpm_get_pllout()/2;
++}
++
++static inline void __cpm_select_msc_clk(int sd)
++{
++ unsigned int pllout2 = __cpm_get_pllout2();
++ unsigned int div = 0;
++
++ if (sd) {
++ div = pllout2 / 24000000;
++ }
++ else {
++ div = pllout2 / 16000000;
++ }
++
++ REG_CPM_MSCCDR = div - 1;
++}
++#define __msc_reset() \
++do { \
++ REG_MSC_STRPCL = MSC_STRPCL_RESET; \
++ while (REG_MSC_STAT & MSC_STAT_IS_RESETTING); \
++} while (0)
++
+ #endif /* !__ASSEMBLY__ */
+ #endif /* __JZ4740_H__ */
+diff --git a/board/qi/qi_lb60/qi_lb60.c b/board/qi/qi_lb60/qi_lb60.c
+index 3bd4e2f..a2ba648 100644
+--- a/board/qi/qi_lb60/qi_lb60.c
++++ b/board/qi/qi_lb60/qi_lb60.c
+@@ -40,8 +40,13 @@ static void gpio_init(void)
+ __gpio_clear_pin(GPIO_KEYOUT_BASE + i);
+ }
+
+- __gpio_as_input(GPIO_KEYIN_8);
+- __gpio_enable_pull(GPIO_KEYIN_8);
++ if (__gpio_get_pin(GPIO_KEYIN_BASE + 2) == 0){
++ printf("[S] pressed, enable UART0\n");
++ __gpio_as_uart0();
++ } else {
++ __gpio_as_input(GPIO_KEYIN_8);
++ __gpio_enable_pull(GPIO_KEYIN_8);
++ }
+
+ /* enable the TP4, TP5 as UART0 */
+ __gpio_jtag_to_uart0();
+diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
+index 565ba6a..3c717b1 100644
+--- a/drivers/mmc/Makefile
++++ b/drivers/mmc/Makefile
+@@ -47,6 +47,7 @@ COBJS-$(CONFIG_SDHCI) += sdhci.o
+ COBJS-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o
+ COBJS-$(CONFIG_SH_MMCIF) += sh_mmcif.o
+ COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o
++COBJS-$(CONFIG_JZ4740_MMC) += jz_mmc.o
+
+ COBJS := $(COBJS-y)
+ SRCS := $(COBJS:.o=.c)
+diff --git a/drivers/mmc/jz_mmc.c b/drivers/mmc/jz_mmc.c
+new file mode 100644
+index 0000000..642cecc
+--- /dev/null
++++ b/drivers/mmc/jz_mmc.c
+@@ -0,0 +1,1179 @@
++/*
++ * (C) Copyright 2003
++ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <config.h>
++#include <common.h>
++#include <part.h>
++#include <mmc.h>
++
++#include <asm/io.h>
++#include <asm/jz4740.h>
++#include "jz_mmc.h"
++
++static int sd2_0 = 0;
++static int mmc_ready = 0;
++static int use_4bit; /* Use 4-bit data bus */
++/*
++ * MMC Events
++ */
++#define MMC_EVENT_NONE 0x00 /* No events */
++#define MMC_EVENT_RX_DATA_DONE 0x01 /* Rx data done */
++#define MMC_EVENT_TX_DATA_DONE 0x02 /* Tx data done */
++#define MMC_EVENT_PROG_DONE 0x04 /* Programming is done */
++
++
++#define MMC_IRQ_MASK() \
++do { \
++ REG_MSC_IMASK = 0xffff; \
++ REG_MSC_IREG = 0xffff; \
++} while (0)
++
++/*
++ * GPIO definition
++ */
++#if defined(CONFIG_SAKC)
++
++#define __msc_init_io() \
++do { \
++ __gpio_as_input(GPIO_SD_CD_N); \
++} while (0)
++
++#else
++#define __msc_init_io() \
++do { \
++ __gpio_as_output(GPIO_SD_VCC_EN_N); \
++ __gpio_as_input(GPIO_SD_CD_N); \
++} while (0)
++
++#define __msc_enable_power() \
++do { \
++ __gpio_clear_pin(GPIO_SD_VCC_EN_N); \
++} while (0)
++
++#define __msc_disable_power() \
++do { \
++ __gpio_set_pin(GPIO_SD_VCC_EN_N); \
++} while (0)
++
++#endif /* CONFIG_SAKE */
++
++#define __msc_card_detected() \
++({ \
++ int detected = 1; \
++ __gpio_as_input(GPIO_SD_CD_N); \
++ __gpio_disable_pull(GPIO_SD_CD_N); \
++ if (!__gpio_get_pin(GPIO_SD_CD_N)) \
++ detected = 0; \
++ detected; \
++})
++
++/*
++ * Local functions
++ */
++
++extern int
++fat_register_device(block_dev_desc_t *dev_desc, int part_no);
++
++static block_dev_desc_t mmc_dev;
++
++block_dev_desc_t * mmc_get_dev(int dev)
++{
++ return ((block_dev_desc_t *)&mmc_dev);
++}
++
++/* Stop the MMC clock and wait while it happens */
++static inline int jz_mmc_stop_clock(void)
++{
++ int timeout = 1000;
++
++ REG_MSC_STRPCL = MSC_STRPCL_CLOCK_CONTROL_STOP;
++
++ while (timeout && (REG_MSC_STAT & MSC_STAT_CLK_EN)) {
++ timeout--;
++ if (timeout == 0)
++ return MMC_ERROR_TIMEOUT;
++ udelay(1);
++ }
++ return MMC_NO_ERROR;
++}
++
++/* Start the MMC clock and operation */
++static inline int jz_mmc_start_clock(void)
++{
++ REG_MSC_STRPCL = MSC_STRPCL_CLOCK_CONTROL_START | MSC_STRPCL_START_OP;
++ return MMC_NO_ERROR;
++}
++
++static inline u32 jz_mmc_calc_clkrt(int is_sd, u32 rate)
++{
++ u32 clkrt = 0;
++ u32 clk_src = is_sd ? 24000000 : 16000000;
++
++ while (rate < clk_src) {
++ clkrt ++;
++ clk_src >>= 1;
++ }
++
++ return clkrt;
++}
++
++/* Set the MMC clock frequency */
++void jz_mmc_set_clock(int sd, u32 rate)
++{
++ jz_mmc_stop_clock();
++
++ /* Select clock source of MSC */
++ __cpm_select_msc_clk(sd);
++
++ /* Set clock dividor of MSC */
++ REG_MSC_CLKRT = jz_mmc_calc_clkrt(sd, rate);
++}
++
++static int jz_mmc_check_status(struct mmc_request *request)
++{
++ u32 status = REG_MSC_STAT;
++
++ /* Checking for response or data timeout */
++ if (status & (MSC_STAT_TIME_OUT_RES | MSC_STAT_TIME_OUT_READ)) {
++ printf("MMC/SD timeout, MMC_STAT 0x%x CMD %d\n", status, request->cmd);
++ return MMC_ERROR_TIMEOUT;
++ }
++
++ /* Checking for CRC error */
++ if (status & (MSC_STAT_CRC_READ_ERROR | MSC_STAT_CRC_WRITE_ERROR | MSC_STAT_CRC_RES_ERR)) {
++ printf("MMC/CD CRC error, MMC_STAT 0x%x\n", status);
++ return MMC_ERROR_CRC;
++ }
++
++ return MMC_NO_ERROR;
++}
++
++/* Obtain response to the command and store it to response buffer */
++static void jz_mmc_get_response(struct mmc_request *request)
++{
++ int i;
++ u8 *buf;
++ u32 data;
++
++ debug("fetch response for request %d, cmd %d\n",
++ request->rtype, request->cmd);
++
++ buf = request->response;
++ request->result = MMC_NO_ERROR;
++
++ switch (request->rtype) {
++ case RESPONSE_R1: case RESPONSE_R1B: case RESPONSE_R6:
++ case RESPONSE_R3: case RESPONSE_R4: case RESPONSE_R5:
++ {
++ data = REG_MSC_RES;
++ buf[0] = (data >> 8) & 0xff;
++ buf[1] = data & 0xff;
++ data = REG_MSC_RES;
++ buf[2] = (data >> 8) & 0xff;
++ buf[3] = data & 0xff;
++ data = REG_MSC_RES;
++ buf[4] = data & 0xff;
++
++ debug("request %d, response [%02x %02x %02x %02x %02x]\n",
++ request->rtype, buf[0], buf[1], buf[2], buf[3], buf[4]);
++ break;
++ }
++ case RESPONSE_R2_CID: case RESPONSE_R2_CSD:
++ {
++ for (i = 0; i < 16; i += 2) {
++ data = REG_MSC_RES;
++ buf[i] = (data >> 8) & 0xff;
++ buf[i+1] = data & 0xff;
++ }
++ debug("request %d, response [", request->rtype);
++#if CONFIG_MMC_DEBUG_VERBOSE > 2
++ if (g_mmc_debug >= 3) {
++ int n;
++ for (n = 0; n < 17; n++)
++ printk("%02x ", buf[n]);
++ printk("]\n");
++ }
++#endif
++ break;
++ }
++ case RESPONSE_NONE:
++ debug("No response\n");
++ break;
++
++ default:
++ debug("unhandled response type for request %d\n", request->rtype);
++ break;
++ }
++}
++
++static int jz_mmc_receive_data(struct mmc_request *req)
++{
++ u32 stat, timeout, data, cnt;
++ u8 *buf = req->buffer;
++ u32 wblocklen = (u32)(req->block_len + 3) >> 2; /* length in word */
++
++ timeout = 0x3ffffff;
++
++ while (timeout) {
++ timeout--;
++ stat = REG_MSC_STAT;
++
++ if (stat & MSC_STAT_TIME_OUT_READ)
++ return MMC_ERROR_TIMEOUT;
++ else if (stat & MSC_STAT_CRC_READ_ERROR)
++ return MMC_ERROR_CRC;
++ else if (!(stat & MSC_STAT_DATA_FIFO_EMPTY)
++ || (stat & MSC_STAT_DATA_FIFO_AFULL)) {
++ /* Ready to read data */
++ break;
++ }
++ udelay(1);
++ }
++ if (!timeout)
++ return MMC_ERROR_TIMEOUT;
++
++ /* Read data from RXFIFO. It could be FULL or PARTIAL FULL */
++ cnt = wblocklen;
++ while (cnt) {
++ data = REG_MSC_RXFIFO;
++ {
++ *buf++ = (u8)(data >> 0);
++ *buf++ = (u8)(data >> 8);
++ *buf++ = (u8)(data >> 16);
++ *buf++ = (u8)(data >> 24);
++ }
++ cnt --;
++ while (cnt && (REG_MSC_STAT & MSC_STAT_DATA_FIFO_EMPTY))
++ ;
++ }
++ return MMC_NO_ERROR;
++}
++
++static int jz_mmc_transmit_data(struct mmc_request *req)
++{
++#if 0
++ u32 nob = req->nob;
++ u32 wblocklen = (u32)(req->block_len + 3) >> 2; /* length in word */
++ u8 *buf = req->buffer;
++ u32 *wbuf = (u32 *)buf;
++ u32 waligned = (((u32)buf & 0x3) == 0); /* word aligned ? */
++ u32 stat, timeout, data, cnt;
++
++ for (nob; nob >= 1; nob--) {
++ timeout = 0x3FFFFFF;
++
++ while (timeout) {
++ timeout--;
++ stat = REG_MSC_STAT;
++
++ if (stat & (MSC_STAT_CRC_WRITE_ERROR | MSC_STAT_CRC_WRITE_ERROR_NOSTS))
++ return MMC_ERROR_CRC;
++ else if (!(stat & MSC_STAT_DATA_FIFO_FULL)) {
++ /* Ready to write data */
++ break;
++ }
++
++ udelay(1);
++ }
++
++ if (!timeout)
++ return MMC_ERROR_TIMEOUT;
++
++ /* Write data to TXFIFO */
++ cnt = wblocklen;
++ while (cnt) {
++ while (REG_MSC_STAT & MSC_STAT_DATA_FIFO_FULL)
++ ;
++
++ if (waligned) {
++ REG_MSC_TXFIFO = *wbuf++;
++ }
++ else {
++ data = *buf++ | (*buf++ << 8) | (*buf++ << 16) | (*buf++ << 24);
++ REG_MSC_TXFIFO = data;
++ }
++
++ cnt--;
++ }
++ }
++#endif
++ return MMC_NO_ERROR;
++}
++
++
++/*
++ * Name: int jz_mmc_exec_cmd()
++ * Function: send command to the card, and get a response
++ * Input: struct mmc_request *req : MMC/SD request
++ * Output: 0: right >0: error code
++ */
++int jz_mmc_exec_cmd(struct mmc_request *request)
++{
++ u32 cmdat = 0, events = 0;
++ int retval, timeout = 0x3fffff;
++
++ /* Indicate we have no result yet */
++ request->result = MMC_NO_RESPONSE;
++ if (request->cmd == MMC_CIM_RESET) {
++ /* On reset, 1-bit bus width */
++ use_4bit = 0;
++
++ /* Reset MMC/SD controller */
++ __msc_reset();
++
++ /* On reset, drop MMC clock down */
++ jz_mmc_set_clock(0, MMC_CLOCK_SLOW);
++
++ /* On reset, stop MMC clock */
++ jz_mmc_stop_clock();
++ }
++ if (request->cmd == MMC_CMD_SEND_OP_COND) {
++ debug("Have an MMC card\n");
++ /* always use 1bit for MMC */
++ use_4bit = 0;
++ }
++ if (request->cmd == SET_BUS_WIDTH) {
++ if (request->arg == 0x2) {
++ printf("Use 4-bit bus width\n");
++ use_4bit = 1;
++ } else {
++ printf("Use 1-bit bus width\n");
++ use_4bit = 0;
++ }
++ }
++
++ /* stop clock */
++ jz_mmc_stop_clock();
++
++ /* mask all interrupts */
++ REG_MSC_IMASK = 0xffff;
++
++ /* clear status */
++ REG_MSC_IREG = 0xffff;
++
++ /* use 4-bit bus width when possible */
++ if (use_4bit)
++ cmdat |= MSC_CMDAT_BUS_WIDTH_4BIT;
++
++ /* Set command type and events */
++ switch (request->cmd) {
++ /* MMC core extra command */
++ case MMC_CIM_RESET:
++ cmdat |= MSC_CMDAT_INIT; /* Initialization sequence sent prior to command */
++ break;
++
++ /* bc - broadcast - no response */
++ case MMC_CMD_GO_IDLE_STATE:
++ case MMC_CMD_SET_DSR:
++ break;
++
++ /* bcr - broadcast with response */
++ case MMC_CMD_SEND_OP_COND:
++ case MMC_CMD_ALL_SEND_CID:
++ case MMC_GO_IRQ_STATE:
++ break;
++
++ /* adtc - addressed with data transfer */
++ case MMC_READ_DAT_UNTIL_STOP:
++ case MMC_CMD_READ_SINGLE_BLOCK:
++ case MMC_CMD_READ_MULTIPLE_BLOCK:
++ case SD_CMD_APP_SEND_SCR:
++ cmdat |= MSC_CMDAT_DATA_EN | MSC_CMDAT_READ;
++ events = MMC_EVENT_RX_DATA_DONE;
++ break;
++
++ case MMC_WRITE_DAT_UNTIL_STOP:
++ case MMC_CMD_WRITE_SINGLE_BLOCK:
++ case MMC_CMD_WRITE_MULTIPLE_BLOCK:
++ case MMC_PROGRAM_CID:
++ case MMC_PROGRAM_CSD:
++ case MMC_SEND_WRITE_PROT:
++ case MMC_GEN_CMD:
++ case MMC_LOCK_UNLOCK:
++ cmdat |= MSC_CMDAT_DATA_EN | MSC_CMDAT_WRITE;
++ events = MMC_EVENT_TX_DATA_DONE | MMC_EVENT_PROG_DONE;
++
++ break;
++
++ case MMC_CMD_STOP_TRANSMISSION:
++ events = MMC_EVENT_PROG_DONE;
++ break;
++
++ /* ac - no data transfer */
++ default:
++ break;
++ }
++
++ /* Set response type */
++ switch (request->rtype) {
++ case RESPONSE_NONE:
++ break;
++
++ case RESPONSE_R1B:
++ cmdat |= MSC_CMDAT_BUSY;
++ /*FALLTHRU*/
++ case RESPONSE_R1:
++ cmdat |= MSC_CMDAT_RESPONSE_R1;
++ break;
++ case RESPONSE_R2_CID:
++ case RESPONSE_R2_CSD:
++ cmdat |= MSC_CMDAT_RESPONSE_R2;
++ break;
++ case RESPONSE_R3:
++ cmdat |= MSC_CMDAT_RESPONSE_R3;
++ break;
++ case RESPONSE_R4:
++ cmdat |= MSC_CMDAT_RESPONSE_R4;
++ break;
++ case RESPONSE_R5:
++ cmdat |= MSC_CMDAT_RESPONSE_R5;
++ break;
++ case RESPONSE_R6:
++ cmdat |= MSC_CMDAT_RESPONSE_R6;
++ break;
++ default:
++ break;
++ }
++
++ /* Set command index */
++ if (request->cmd == MMC_CIM_RESET) {
++ REG_MSC_CMD = MMC_CMD_GO_IDLE_STATE;
++ } else {
++ REG_MSC_CMD = request->cmd;
++ }
++
++ /* Set argument */
++ REG_MSC_ARG = request->arg;
++
++ /* Set block length and nob */
++ if (request->cmd == SD_CMD_APP_SEND_SCR) { /* get SCR from DataFIFO */
++ REG_MSC_BLKLEN = 8;
++ REG_MSC_NOB = 1;
++ } else {
++ REG_MSC_BLKLEN = request->block_len;
++ REG_MSC_NOB = request->nob;
++ }
++
++ /* Set command */
++ REG_MSC_CMDAT = cmdat;
++
++ debug("Send cmd %d cmdat: %x arg: %x resp %d\n", request->cmd,
++ cmdat, request->arg, request->rtype);
++
++ /* Start MMC/SD clock and send command to card */
++ jz_mmc_start_clock();
++
++ /* Wait for command completion */
++ while (timeout-- && !(REG_MSC_STAT & MSC_STAT_END_CMD_RES))
++ ;
++
++ if (timeout == 0)
++ return MMC_ERROR_TIMEOUT;
++
++ REG_MSC_IREG = MSC_IREG_END_CMD_RES; /* clear flag */
++
++ /* Check for status */
++ retval = jz_mmc_check_status(request);
++ if (retval) {
++ return retval;
++ }
++
++ /* Complete command with no response */
++ if (request->rtype == RESPONSE_NONE) {
++ return MMC_NO_ERROR;
++ }
++
++ /* Get response */
++ jz_mmc_get_response(request);
++
++ /* Start data operation */
++ if (events & (MMC_EVENT_RX_DATA_DONE | MMC_EVENT_TX_DATA_DONE)) {
++ if (events & MMC_EVENT_RX_DATA_DONE) {
++ if (request->cmd == SD_CMD_APP_SEND_SCR) {
++ /* SD card returns SCR register as data.
++ MMC core expect it in the response buffer,
++ after normal response. */
++ request->buffer = (u8 *)((u32)request->response + 5);
++ }
++ jz_mmc_receive_data(request);
++ }
++
++ if (events & MMC_EVENT_TX_DATA_DONE) {
++ jz_mmc_transmit_data(request);
++ }
++
++ /* Wait for Data Done */
++ while (!(REG_MSC_IREG & MSC_IREG_DATA_TRAN_DONE))
++ ;
++ REG_MSC_IREG = MSC_IREG_DATA_TRAN_DONE; /* clear status */
++ }
++
++ /* Wait for Prog Done event */
++ if (events & MMC_EVENT_PROG_DONE) {
++ while (!(REG_MSC_IREG & MSC_IREG_PRG_DONE))
++ ;
++ REG_MSC_IREG = MSC_IREG_PRG_DONE; /* clear status */
++ }
++
++ /* Command completed */
++
++ return MMC_NO_ERROR; /* return successfully */
++}
++
++int mmc_block_read(u8 *dst, ulong src, ulong len)
++{
++
++ struct mmc_request request;
++ struct mmc_response_r1 r1;
++ int retval = 0;
++
++ if (len == 0)
++ goto exit;
++
++ mmc_simple_cmd(&request, MMC_CMD_SEND_STATUS, mmcinfo.rca, RESPONSE_R1);
++ retval = mmc_unpack_r1(&request, &r1, 0);
++ if (retval && (retval != MMC_ERROR_STATE_MISMATCH))
++ goto exit;
++
++ mmc_simple_cmd(&request, MMC_CMD_SET_BLOCKLEN, len, RESPONSE_R1);
++ if (retval = mmc_unpack_r1(&request, &r1, 0))
++ goto exit;
++
++ if (!sd2_0)
++ src *= mmcinfo.block_len;
++
++ mmc_send_cmd(&request, MMC_CMD_READ_SINGLE_BLOCK, src, 1, len, RESPONSE_R1, dst);
++ if (retval = mmc_unpack_r1(&request, &r1, 0))
++ goto exit;
++
++exit:
++ return retval;
++}
++
++ulong mmc_bread(int dev_num, ulong blkstart, ulong blkcnt, ulong *dst)
++{
++ if (!mmc_ready) {
++ printf("Please initial the MMC first\n");
++ return -1;
++ }
++
++ int i = 0;
++ ulong dst_tmp = dst;
++
++ for (i = 0; i < blkcnt; i++) {
++ if ((mmc_block_read((uchar *)(dst_tmp), blkstart, mmcinfo.block_len)) < 0)
++ return -1;
++
++ dst_tmp += mmcinfo.block_len;
++ blkstart++;
++ }
++
++ return i;
++}
++
++int mmc_select_card(void)
++{
++ struct mmc_request request;
++ struct mmc_response_r1 r1;
++ int retval;
++
++ mmc_simple_cmd(&request, MMC_CMD_SELECT_CARD, mmcinfo.rca, RESPONSE_R1B);
++ retval = mmc_unpack_r1(&request, &r1, 0);
++ if (retval) {
++ return retval;
++ }
++
++ if (mmcinfo.sd) {
++ mmc_simple_cmd(&request, MMC_CMD_APP_CMD, mmcinfo.rca, RESPONSE_R1);
++ retval = mmc_unpack_r1(&request,&r1,0);
++ if (retval) {
++ return retval;
++ }
++#if defined(MMC_BUS_WIDTH_1BIT)
++ mmc_simple_cmd(&request, SET_BUS_WIDTH, 1, RESPONSE_R1);
++#else
++ mmc_simple_cmd(&request, SET_BUS_WIDTH, 2, RESPONSE_R1);
++#endif
++ retval = mmc_unpack_r1(&request,&r1,0);
++ if (retval) {
++ return retval;
++ }
++ }
++ return 0;
++}
++
++/*
++ * Configure card
++ */
++static void mmc_configure_card(void)
++{
++ u32 rate;
++
++ /* Get card info */
++ if (sd2_0)
++ mmcinfo.block_num = (mmcinfo.csd.c_size + 1) << 10;
++ else
++ mmcinfo.block_num = (mmcinfo.csd.c_size + 1) * (1 << (mmcinfo.csd.c_size_mult + 2));
++
++ mmcinfo.block_len = 1 << mmcinfo.csd.read_bl_len;
++
++ mmc_dev.if_type = IF_TYPE_SD;
++ mmc_dev.part_type = PART_TYPE_DOS;
++ mmc_dev.dev = 0;
++ mmc_dev.lun = 0;
++ mmc_dev.type = 0;
++ mmc_dev.blksz = mmcinfo.block_len;
++ mmc_dev.lba = mmcinfo.block_num;
++ mmc_dev.removable = 0;
++
++ printf("%s Detected: %lu blocks of %lu bytes\n",
++ sd2_0 == 1 ? "SDHC" : "SD",
++ mmc_dev.lba,
++ mmc_dev.blksz);
++
++ /* Fix the clock rate */
++ rate = mmc_tran_speed(mmcinfo.csd.tran_speed);
++ if (rate < MMC_CLOCK_SLOW)
++ rate = MMC_CLOCK_SLOW;
++ if ((mmcinfo.sd == 0) && (rate > MMC_CLOCK_FAST))
++ rate = MMC_CLOCK_FAST;
++ if ((mmcinfo.sd) && (rate > SD_CLOCK_FAST))
++ rate = SD_CLOCK_FAST;
++
++ debug("%s: block_len=%d block_num=%d rate=%d\n",
++ __func__, mmcinfo.block_len, mmcinfo.block_num, rate);
++
++ jz_mmc_set_clock(mmcinfo.sd, rate);
++}
++
++/*
++ * State machine routines to initialize card(s)
++ */
++
++/*
++ CIM_SINGLE_CARD_ACQ (frequency at 400 kHz)
++ --- Must enter from GO_IDLE_STATE ---
++ 1. SD_SEND_OP_COND (SD Card) [CMD55] + [CMD41]
++ 2. SEND_OP_COND (Full Range) [CMD1] {optional}
++ 3. SEND_OP_COND (Set Range ) [CMD1]
++ If busy, delay and repeat step 2
++ 4. ALL_SEND_CID [CMD2]
++ If timeout, set an error (no cards found)
++ 5. SET_RELATIVE_ADDR [CMD3]
++ 6. SEND_CSD [CMD9]
++ 7. SET_DSR [CMD4] Only call this if (csd.dsr_imp).
++ 8. Set clock frequency (check available in csd.tran_speed)
++ */
++
++#define MMC_INIT_DOING 0
++#define MMC_INIT_PASSED 1
++#define MMC_INIT_FAILED 2
++
++static int mmc_init_card_state(struct mmc_request *request)
++{
++ struct mmc_response_r1 r1;
++ struct mmc_response_r3 r3;
++ int retval;
++ int ocr = 0x40300000;
++ int limit_41 = 0;
++
++ switch (request->cmd) {
++ case MMC_CMD_GO_IDLE_STATE: /* No response to parse */
++ if (mmcinfo.sd)
++ mmc_simple_cmd(request, 8, 0x1aa, RESPONSE_R1);
++ else
++ mmc_simple_cmd(request, MMC_CMD_SEND_OP_COND, MMC_OCR_ARG, RESPONSE_R3);
++ break;
++
++ case 8:
++ retval = mmc_unpack_r1(request,&r1,mmcinfo.state);
++ mmc_simple_cmd(request, MMC_CMD_APP_CMD, 0, RESPONSE_R1);
++ break;
++
++ case MMC_CMD_APP_CMD:
++ retval = mmc_unpack_r1(request,&r1,mmcinfo.state);
++ if (retval & (limit_41 < 100)) {
++ debug("%s: unable to MMC_APP_CMD error=%d (%s)\n",
++ __func__, retval, mmc_result_to_string(retval));
++ limit_41++;
++ mmc_simple_cmd(request, SD_CMD_APP_SEND_OP_COND, ocr, RESPONSE_R3);
++ } else if (limit_41 < 100) {
++ limit_41++;
++ mmc_simple_cmd(request, SD_CMD_APP_SEND_OP_COND, ocr, RESPONSE_R3);
++ } else{
++ /* reset the card to idle*/
++ mmc_simple_cmd(request, MMC_CMD_GO_IDLE_STATE, 0, RESPONSE_NONE);
++ mmcinfo.sd = 0;
++ }
++ break;
++
++ case SD_CMD_APP_SEND_OP_COND:
++ retval = mmc_unpack_r3(request, &r3);
++ if (retval) {
++ debug("%s: try MMC card\n", __func__);
++ mmc_simple_cmd(request, SD_CMD_APP_SEND_OP_COND, MMC_OCR_ARG, RESPONSE_R3);
++ break;
++ }
++
++ debug("%s: read ocr value = 0x%08x\n", __func__, r3.ocr);
++
++ if(!(r3.ocr & MMC_CARD_BUSY || ocr == 0)){
++ udelay(50000);
++ mmc_simple_cmd(request, MMC_CMD_APP_CMD, 0, RESPONSE_R1);
++ } else {
++ mmcinfo.sd = 1; /* SD Card ready */
++ mmcinfo.state = CARD_STATE_READY;
++ mmc_simple_cmd(request, MMC_CMD_ALL_SEND_CID, 0, RESPONSE_R2_CID);
++ }
++ break;
++
++ case MMC_CMD_SEND_OP_COND:
++ retval = mmc_unpack_r3(request, &r3);
++ if (retval) {
++ debug("%s: failed SEND_OP_COND error=%d (%s)\n",
++ __func__, retval, mmc_result_to_string(retval));
++ return MMC_INIT_FAILED;
++ }
++
++ debug("%s: read ocr value = 0x%08x\n", __func__, r3.ocr);
++ if (!(r3.ocr & MMC_CARD_BUSY)) {
++ mmc_simple_cmd(request, MMC_CMD_SEND_OP_COND, MMC_OCR_ARG, RESPONSE_R3);
++ } else {
++ mmcinfo.sd = 0; /* MMC Card ready */
++ mmcinfo.state = CARD_STATE_READY;
++ mmc_simple_cmd(request, MMC_CMD_ALL_SEND_CID, 0, RESPONSE_R2_CID);
++ }
++ break;
++
++ case MMC_CMD_ALL_SEND_CID:
++ retval = mmc_unpack_cid( request, &mmcinfo.cid );
++ /*FIXME:ignore CRC error for CMD2/CMD9/CMD10 */
++ if ( retval && (retval != MMC_ERROR_CRC)) {
++ debug("mmc_init_card_state: unable to ALL_SEND_CID error=%d (%s)\n",
++ retval, mmc_result_to_string(retval));
++ return MMC_INIT_FAILED;
++ }
++ mmcinfo.state = CARD_STATE_IDENT;
++ if(mmcinfo.sd)
++ mmc_simple_cmd(request, MMC_CMD_SET_RELATIVE_ADDR, 0, RESPONSE_R6);
++ else
++ mmc_simple_cmd(request, MMC_CMD_SET_RELATIVE_ADDR, ID_TO_RCA(mmcinfo.id) << 16, RESPONSE_R1);
++ break;
++
++ case MMC_CMD_SET_RELATIVE_ADDR:
++ if (mmcinfo.sd) {
++ retval = mmc_unpack_r6(request, &r1, mmcinfo.state, &mmcinfo.rca);
++ mmcinfo.rca = mmcinfo.rca << 16;
++ debug("%s: Get RCA from SD: 0x%04x Status: %x\n",
++ __func__, mmcinfo.rca, r1.status);
++ } else {
++ retval = mmc_unpack_r1(request,&r1,mmcinfo.state);
++ mmcinfo.rca = ID_TO_RCA(mmcinfo.id) << 16;
++ }
++ if (retval) {
++ debug("%s: unable to SET_RELATIVE_ADDR error=%d (%s)\n",
++ __func__, retval, mmc_result_to_string(retval));
++ return MMC_INIT_FAILED;
++ }
++
++ mmcinfo.state = CARD_STATE_STBY;
++ mmc_simple_cmd(request, MMC_CMD_SEND_CSD, mmcinfo.rca, RESPONSE_R2_CSD);
++
++ break;
++
++ case MMC_CMD_SEND_CSD:
++ retval = mmc_unpack_csd(request, &mmcinfo.csd);
++ mmc_ready = 1;
++ /*FIXME:ignore CRC error for CMD2/CMD9/CMD10 */
++ if (retval && (retval != MMC_ERROR_CRC)) {
++ debug("%s: unable to SEND_CSD error=%d (%s)\n",
++ __func__, retval, mmc_result_to_string(retval));
++ return MMC_INIT_FAILED;
++ }
++ if (mmcinfo.csd.dsr_imp) {
++ debug("%s: driver doesn't support setting DSR\n", __func__);
++ }
++ mmc_configure_card();
++ return MMC_INIT_PASSED;
++
++ default:
++ debug("%s: error! Illegal last cmd %d\n", __func__, request->cmd);
++ return MMC_INIT_FAILED;
++ }
++
++ return MMC_INIT_DOING;
++}
++
++int mmc_init_card(void)
++{
++ struct mmc_request request;
++ int retval;
++
++ mmc_simple_cmd(&request, MMC_CIM_RESET, 0, RESPONSE_NONE); /* reset card */
++ mmc_simple_cmd(&request, MMC_CMD_GO_IDLE_STATE, 0, RESPONSE_NONE);
++ mmcinfo.sd = 1; /* assuming a SD card */
++
++ while ((retval = mmc_init_card_state(&request)) == MMC_INIT_DOING)
++ ;
++
++ if (retval == MMC_INIT_PASSED)
++ return MMC_NO_ERROR;
++ else
++ return MMC_NO_RESPONSE;
++}
++
++int mmc_legacy_init(int verbose)
++{
++ if (!__msc_card_detected())
++ return 1;
++
++ /* Step-1: init GPIO */
++ __gpio_as_msc();
++ __msc_init_io();
++
++ /* Step-2: turn on power of card */
++#if !defined(CONFIG_SAKC)
++ __msc_enable_power();
++#endif
++
++ /* Step-3: Reset MSC Controller. */
++ __msc_reset();
++
++ /* Step-3: mask all IRQs. */
++ MMC_IRQ_MASK();
++
++ /* Step-4: stop MMC/SD clock */
++ jz_mmc_stop_clock();
++ mmc_init_card();
++ mmc_select_card();
++
++ mmc_dev.block_read = mmc_bread;
++ fat_register_device(&mmc_dev,1); /* partitions start counting with 1 */
++
++ return 0;
++}
++
++/*
++ * Debugging functions
++ */
++static char * mmc_result_strings[] = {
++ "NO_RESPONSE",
++ "NO_ERROR",
++ "ERROR_OUT_OF_RANGE",
++ "ERROR_ADDRESS",
++ "ERROR_BLOCK_LEN",
++ "ERROR_ERASE_SEQ",
++ "ERROR_ERASE_PARAM",
++ "ERROR_WP_VIOLATION",
++ "ERROR_CARD_IS_LOCKED",
++ "ERROR_LOCK_UNLOCK_FAILED",
++ "ERROR_COM_CRC",
++ "ERROR_ILLEGAL_COMMAND",
++ "ERROR_CARD_ECC_FAILED",
++ "ERROR_CC",
++ "ERROR_GENERAL",
++ "ERROR_UNDERRUN",
++ "ERROR_OVERRUN",
++ "ERROR_CID_CSD_OVERWRITE",
++ "ERROR_STATE_MISMATCH",
++ "ERROR_HEADER_MISMATCH",
++ "ERROR_TIMEOUT",
++ "ERROR_CRC",
++ "ERROR_DRIVER_FAILURE",
++};
++
++char * mmc_result_to_string(int i)
++{
++ return mmc_result_strings[i+1];
++}
++
++static char * card_state_strings[] = {
++ "empty",
++ "idle",
++ "ready",
++ "ident",
++ "stby",
++ "tran",
++ "data",
++ "rcv",
++ "prg",
++ "dis",
++};
++
++static inline char * card_state_to_string(int i)
++{
++ return card_state_strings[i+1];
++}
++
++/*
++ * Utility functions
++ */
++
++#define PARSE_U32(_buf,_index) \
++ (((u32)_buf[_index]) << 24) | (((u32)_buf[_index+1]) << 16) | \
++ (((u32)_buf[_index+2]) << 8) | ((u32)_buf[_index+3]);
++
++#define PARSE_U16(_buf,_index) \
++ (((u16)_buf[_index]) << 8) | ((u16)_buf[_index+1]);
++
++int mmc_unpack_csd(struct mmc_request *request, struct mmc_csd *csd)
++{
++ u8 *buf = request->response;
++ int num = 0;
++
++ if (request->result)
++ return request->result;
++
++ if (buf[0] != 0x3f)
++ return MMC_ERROR_HEADER_MISMATCH;
++
++ csd->csd_structure = (buf[1] & 0xc0) >> 6;
++ if (csd->csd_structure)
++ sd2_0 = 1;
++ else
++ sd2_0 = 0;
++
++ switch (csd->csd_structure) {
++ case 0 :/* Version 1.01-1.10
++ * Version 2.00/Standard Capacity */
++ csd->taac = buf[2];
++ csd->nsac = buf[3];
++ csd->tran_speed = buf[4];
++ csd->ccc = (((u16)buf[5]) << 4) | ((buf[6] & 0xf0) >> 4);
++ csd->read_bl_len = buf[6] & 0x0f;
++ /* for support 2GB card*/
++ if (csd->read_bl_len >= 10)
++ {
++ num = csd->read_bl_len - 9;
++ csd->read_bl_len = 9;
++ }
++
++ csd->read_bl_partial = (buf[7] & 0x80) ? 1 : 0;
++ csd->write_blk_misalign = (buf[7] & 0x40) ? 1 : 0;
++ csd->read_blk_misalign = (buf[7] & 0x20) ? 1 : 0;
++ csd->dsr_imp = (buf[7] & 0x10) ? 1 : 0;
++ csd->c_size = ((((u16)buf[7]) & 0x03) << 10) | (((u16)buf[8]) << 2) | (((u16)buf[9]) & 0xc0) >> 6;
++
++ if (num)
++ csd->c_size = csd->c_size << num;
++
++
++ csd->vdd_r_curr_min = (buf[9] & 0x38) >> 3;
++ csd->vdd_r_curr_max = buf[9] & 0x07;
++ csd->vdd_w_curr_min = (buf[10] & 0xe0) >> 5;
++ csd->vdd_w_curr_max = (buf[10] & 0x1c) >> 2;
++ csd->c_size_mult = ((buf[10] & 0x03) << 1) | ((buf[11] & 0x80) >> 7);
++ csd->sector_size = (buf[11] & 0x7c) >> 2;
++ csd->erase_grp_size = ((buf[11] & 0x03) << 3) | ((buf[12] & 0xe0) >> 5);
++ csd->wp_grp_size = buf[12] & 0x1f;
++ csd->wp_grp_enable = (buf[13] & 0x80) ? 1 : 0;
++ csd->default_ecc = (buf[13] & 0x60) >> 5;
++ csd->r2w_factor = (buf[13] & 0x1c) >> 2;
++ csd->write_bl_len = ((buf[13] & 0x03) << 2) | ((buf[14] & 0xc0) >> 6);
++ if (csd->write_bl_len >= 10)
++ csd->write_bl_len = 9;
++
++ csd->write_bl_partial = (buf[14] & 0x20) ? 1 : 0;
++ csd->file_format_grp = (buf[15] & 0x80) ? 1 : 0;
++ csd->copy = (buf[15] & 0x40) ? 1 : 0;
++ csd->perm_write_protect = (buf[15] & 0x20) ? 1 : 0;
++ csd->tmp_write_protect = (buf[15] & 0x10) ? 1 : 0;
++ csd->file_format = (buf[15] & 0x0c) >> 2;
++ csd->ecc = buf[15] & 0x03;
++ break;
++ case 1 : /* Version 2.00/High Capacity */
++ csd->taac = 0;
++ csd->nsac = 0;
++ csd->tran_speed = buf[4];
++ csd->ccc = (((u16)buf[5]) << 4) | ((buf[6] & 0xf0) >> 4);
++
++ csd->read_bl_len = 9;
++ csd->read_bl_partial = 0;
++ csd->write_blk_misalign = 0;
++ csd->read_blk_misalign = 0;
++ csd->dsr_imp = (buf[7] & 0x10) ? 1 : 0;
++ csd->c_size = ((((u16)buf[8]) & 0x3f) << 16) | (((u16)buf[9]) << 8) | ((u16)buf[10]) ;
++ csd->sector_size = 0x7f;
++ csd->erase_grp_size = 0;
++ csd->wp_grp_size = 0;
++ csd->wp_grp_enable = 0;
++ csd->default_ecc = (buf[13] & 0x60) >> 5;
++ csd->r2w_factor = 4;/* Unused */
++ csd->write_bl_len = 9;
++
++ csd->write_bl_partial = 0;
++ csd->file_format_grp = 0;
++ csd->copy = (buf[15] & 0x40) ? 1 : 0;
++ csd->perm_write_protect = (buf[15] & 0x20) ? 1 : 0;
++ csd->tmp_write_protect = (buf[15] & 0x10) ? 1 : 0;
++ csd->file_format = 0;
++ csd->ecc = buf[15] & 0x03;
++ }
++
++ return 0;
++}
++
++int mmc_unpack_r1(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state)
++{
++ u8 *buf = request->response;
++
++ if (request->result)
++ return request->result;
++
++ r1->cmd = buf[0];
++ r1->status = PARSE_U32(buf,1);
++
++ debug("mmc_unpack_r1: cmd=%d status=%08x\n", r1->cmd, r1->status);
++
++ if (R1_STATUS(r1->status)) {
++ if (r1->status & R1_OUT_OF_RANGE) return MMC_ERROR_OUT_OF_RANGE;
++ if (r1->status & R1_ADDRESS_ERROR) return MMC_ERROR_ADDRESS;
++ if (r1->status & R1_BLOCK_LEN_ERROR) return MMC_ERROR_BLOCK_LEN;
++ if (r1->status & R1_ERASE_SEQ_ERROR) return MMC_ERROR_ERASE_SEQ;
++ if (r1->status & R1_ERASE_PARAM) return MMC_ERROR_ERASE_PARAM;
++ if (r1->status & R1_WP_VIOLATION) return MMC_ERROR_WP_VIOLATION;
++ /*if (r1->status & R1_CARD_IS_LOCKED) return MMC_ERROR_CARD_IS_LOCKED; */
++ if (r1->status & R1_LOCK_UNLOCK_FAILED) return MMC_ERROR_LOCK_UNLOCK_FAILED;
++ if (r1->status & R1_COM_CRC_ERROR) return MMC_ERROR_COM_CRC;
++ if (r1->status & R1_ILLEGAL_COMMAND) return MMC_ERROR_ILLEGAL_COMMAND;
++ if (r1->status & R1_CARD_ECC_FAILED) return MMC_ERROR_CARD_ECC_FAILED;
++ if (r1->status & R1_CC_ERROR) return MMC_ERROR_CC;
++ if (r1->status & R1_ERROR) return MMC_ERROR_GENERAL;
++ if (r1->status & R1_UNDERRUN) return MMC_ERROR_UNDERRUN;
++ if (r1->status & R1_OVERRUN) return MMC_ERROR_OVERRUN;
++ if (r1->status & R1_CID_CSD_OVERWRITE) return MMC_ERROR_CID_CSD_OVERWRITE;
++ }
++
++ if (buf[0] != request->cmd)
++ return MMC_ERROR_HEADER_MISMATCH;
++
++ /* This should be last - it's the least dangerous error */
++
++ return 0;
++}
++
++int mmc_unpack_scr(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state, u32 *scr)
++{
++ u8 *buf = request->response;
++ if (request->result)
++ return request->result;
++
++ *scr = PARSE_U32(buf, 5); /* Save SCR returned by the SD Card */
++ return mmc_unpack_r1(request, r1, state);
++
++}
++
++int mmc_unpack_r6(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state, int *rca)
++{
++ u8 *buf = request->response;
++
++ if (request->result)
++ return request->result;
++
++ *rca = PARSE_U16(buf,1); /* Save RCA returned by the SD Card */
++
++ *(buf+1) = 0;
++ *(buf+2) = 0;
++
++ return mmc_unpack_r1(request, r1, state);
++}
++
++int mmc_unpack_cid(struct mmc_request *request, struct mmc_cid *cid)
++{
++ int i;
++ u8 *buf = request->response;
++
++ if (request->result)
++ return request->result;
++
++ cid->mid = buf[1];
++ cid->oid = PARSE_U16(buf,2);
++ for (i = 0 ; i < 5 ; i++)
++ cid->pnm[i] = buf[4+i];
++ cid->pnm[6] = 0;
++ cid->prv = buf[10];
++ cid->psn = PARSE_U32(buf,10);
++ cid->mdt = buf[15];
++
++ printf("Man %02x OEM 0x%04x \"%s\" %d.%d 0x%08x "
++ "Date %02u/%04u\n",
++ cid->mid,
++ cid->oid,
++ cid->pnm,
++ cid->prv >> 4,
++ cid->prv & 0xf,
++ cid->psn,
++ cid->mdt & 0xf,
++ (cid->mdt >> 4) + 2000);
++
++ if (buf[0] != 0x3f)
++ return MMC_ERROR_HEADER_MISMATCH;
++ return 0;
++}
++
++int mmc_unpack_r3(struct mmc_request *request, struct mmc_response_r3 *r3)
++{
++ u8 *buf = request->response;
++
++ if (request->result)
++ return request->result;
++
++ r3->ocr = PARSE_U32(buf,1);
++ debug("mmc_unpack_r3: ocr=%08x\n", r3->ocr);
++
++ if (buf[0] != 0x3f) return MMC_ERROR_HEADER_MISMATCH;
++ return 0;
++}
++
++#define KBPS 1
++#define MBPS 1000
++
++static u32 ts_exp[] = { 100*KBPS, 1*MBPS, 10*MBPS, 100*MBPS, 0, 0, 0, 0 };
++static u32 ts_mul[] = { 0, 1000, 1200, 1300, 1500, 2000, 2500, 3000,
++ 3500, 4000, 4500, 5000, 5500, 6000, 7000, 8000 };
++
++u32 mmc_tran_speed(u8 ts)
++{
++ u32 rate = ts_exp[(ts & 0x7)] * ts_mul[(ts & 0x78) >> 3];
++
++ if (rate <= 0) {
++ debug("%s: error - unrecognized speed 0x%02x\n", __func__, ts);
++ return 1;
++ }
++
++ return rate;
++}
++
++void mmc_send_cmd(struct mmc_request *request, int cmd, u32 arg,
++ u16 nob, u16 block_len, enum mmc_rsp_t rtype, u8 *buffer)
++{
++ request->cmd = cmd;
++ request->arg = arg;
++ request->rtype = rtype;
++ request->nob = nob;
++ request->block_len = block_len;
++ request->buffer = buffer;
++ request->cnt = nob * block_len;
++
++ jz_mmc_exec_cmd(request);
++}
+diff --git a/drivers/mmc/jz_mmc.h b/drivers/mmc/jz_mmc.h
+new file mode 100644
+index 0000000..936c514
+--- /dev/null
++++ b/drivers/mmc/jz_mmc.h
+@@ -0,0 +1,176 @@
++/*
++ * linux/drivers/mmc/jz_mmc.h
++ *
++ * Author: Vladimir Shebordaev, Igor Oblakov
++ * Copyright: MontaVista Software Inc.
++ *
++ * $Id: jz_mmc.h,v 1.3 2007-06-15 08:04:20 jlwei Exp $
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __MMC_JZMMC_H__
++#define __MMC_JZMMC_H__
++
++#define ID_TO_RCA(x) ((x)+1)
++#define MMC_OCR_ARG 0x00ff8000 /* Argument of OCR */
++
++/* Standard MMC/SD clock speeds */
++#define MMC_CLOCK_SLOW 400000 /* 400 kHz for initial setup */
++#define MMC_CLOCK_FAST 20000000 /* 20 MHz for maximum for normal operation */
++#define SD_CLOCK_FAST 24000000 /* 24 MHz for SD Cards */
++
++/* Use negative numbers to disambiguate */
++#define MMC_CIM_RESET -1
++#define SET_BUS_WIDTH 6 /* ac [1:0] bus width R1 */
++
++#define R1_OUT_OF_RANGE (1 << 31) /* er, c */
++#define R1_ADDRESS_ERROR (1 << 30) /* erx, c */
++#define R1_BLOCK_LEN_ERROR (1 << 29) /* er, c */
++#define R1_ERASE_SEQ_ERROR (1 << 28) /* er, c */
++#define R1_ERASE_PARAM (1 << 27) /* ex, c */
++#define R1_WP_VIOLATION (1 << 26) /* erx, c */
++#define R1_CARD_IS_LOCKED (1 << 25) /* sx, a */
++#define R1_LOCK_UNLOCK_FAILED (1 << 24) /* erx, c */
++#define R1_COM_CRC_ERROR (1 << 23) /* er, b */
++#define R1_ILLEGAL_COMMAND (1 << 22) /* er, b */
++#define R1_CARD_ECC_FAILED (1 << 21) /* ex, c */
++#define R1_CC_ERROR (1 << 20) /* erx, c */
++#define R1_ERROR (1 << 19) /* erx, c */
++#define R1_UNDERRUN (1 << 18) /* ex, c */
++#define R1_OVERRUN (1 << 17) /* ex, c */
++#define R1_CID_CSD_OVERWRITE (1 << 16) /* erx, c, CID/CSD overwrite */
++#define R1_WP_ERASE_SKIP (1 << 15) /* sx, c */
++#define R1_CARD_ECC_DISABLED (1 << 14) /* sx, a */
++#define R1_ERASE_RESET (1 << 13) /* sr, c */
++#define R1_STATUS(x) (x & 0xFFFFE000)
++
++#define MMC_CARD_BUSY 0x80000000 /* Card Power up status bit */
++
++#define MMC_PROGRAM_CID 26 /* adtc R1 */
++#define MMC_PROGRAM_CSD 27 /* adtc R1 */
++
++#define MMC_GO_IRQ_STATE 40 /* bcr R5 */
++#define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1b */
++#define MMC_LOCK_UNLOCK 42 /* adtc R1b */
++#define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1 */
++#define MMC_READ_DAT_UNTIL_STOP 11 /* adtc [31:0] dadr R1 */
++#define MMC_SEND_WRITE_PROT 30 /* adtc [31:0] wpdata addr R1 */
++
++
++enum mmc_result_t {
++ MMC_NO_RESPONSE = -1,
++ MMC_NO_ERROR = 0,
++ MMC_ERROR_OUT_OF_RANGE,
++ MMC_ERROR_ADDRESS,
++ MMC_ERROR_BLOCK_LEN,
++ MMC_ERROR_ERASE_SEQ,
++ MMC_ERROR_ERASE_PARAM,
++ MMC_ERROR_WP_VIOLATION,
++ MMC_ERROR_CARD_IS_LOCKED,
++ MMC_ERROR_LOCK_UNLOCK_FAILED,
++ MMC_ERROR_COM_CRC,
++ MMC_ERROR_ILLEGAL_COMMAND,
++ MMC_ERROR_CARD_ECC_FAILED,
++ MMC_ERROR_CC,
++ MMC_ERROR_GENERAL,
++ MMC_ERROR_UNDERRUN,
++ MMC_ERROR_OVERRUN,
++ MMC_ERROR_CID_CSD_OVERWRITE,
++ MMC_ERROR_STATE_MISMATCH,
++ MMC_ERROR_HEADER_MISMATCH,
++ MMC_ERROR_TIMEOUT,
++ MMC_ERROR_CRC,
++ MMC_ERROR_DRIVER_FAILURE,
++};
++
++enum card_state {
++ CARD_STATE_EMPTY = -1,
++ CARD_STATE_IDLE = 0,
++ CARD_STATE_READY = 1,
++ CARD_STATE_IDENT = 2,
++ CARD_STATE_STBY = 3,
++ CARD_STATE_TRAN = 4,
++ CARD_STATE_DATA = 5,
++ CARD_STATE_RCV = 6,
++ CARD_STATE_PRG = 7,
++ CARD_STATE_DIS = 8,
++};
++
++enum mmc_rsp_t {
++ RESPONSE_NONE = 0,
++ RESPONSE_R1 = 1,
++ RESPONSE_R1B = 2,
++ RESPONSE_R2_CID = 3,
++ RESPONSE_R2_CSD = 4,
++ RESPONSE_R3 = 5,
++ RESPONSE_R4 = 6,
++ RESPONSE_R5 = 7,
++ RESPONSE_R6 = 8,
++};
++
++struct mmc_response_r1 {
++ u8 cmd;
++ u32 status;
++};
++
++struct mmc_response_r3 {
++ u32 ocr;
++};
++
++/* the information structure of MMC/SD Card */
++struct mmc_info {
++ int id; /* Card index */
++ int sd; /* MMC or SD card */
++ int rca; /* RCA */
++ u32 scr; /* SCR 63:32*/
++ int flags; /* Ejected, inserted */
++ enum card_state state; /* empty, ident, ready, whatever */
++
++ /* Card specific information */
++ struct mmc_cid cid;
++ struct mmc_csd csd;
++ u32 block_num;
++ u32 block_len;
++ u32 erase_unit;
++};
++
++struct mmc_info mmcinfo;
++
++struct mmc_request {
++ int index; /* Slot index - used for CS lines */
++ int cmd; /* Command to send */
++ u32 arg; /* Argument to send */
++ enum mmc_rsp_t rtype; /* Response type expected */
++
++ /* Data transfer (these may be modified at the low level) */
++ u16 nob; /* Number of blocks to transfer*/
++ u16 block_len; /* Block length */
++ u8 *buffer; /* Data buffer */
++ u32 cnt; /* Data length, for PIO */
++
++ /* Results */
++ u8 response[18]; /* Buffer to store response - CRC is optional */
++ enum mmc_result_t result;
++};
++
++char * mmc_result_to_string(int);
++int mmc_unpack_csd(struct mmc_request *request, struct mmc_csd *csd);
++int mmc_unpack_r1(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state);
++int mmc_unpack_r6(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state, int *rca);
++int mmc_unpack_scr(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state, u32 *scr);
++int mmc_unpack_cid(struct mmc_request *request, struct mmc_cid *cid);
++int mmc_unpack_r3(struct mmc_request *request, struct mmc_response_r3 *r3);
++
++void mmc_send_cmd(struct mmc_request *request, int cmd, u32 arg,
++ u16 nob, u16 block_len, enum mmc_rsp_t rtype, u8 *buffer);
++u32 mmc_tran_speed(u8 ts);
++void jz_mmc_set_clock(int sd, u32 rate);
++
++static inline void mmc_simple_cmd(struct mmc_request *request, int cmd, u32 arg, enum mmc_rsp_t rtype)
++{
++ mmc_send_cmd( request, cmd, arg, 0, 0, rtype, 0);
++}
++
++#endif /* __MMC_JZMMC_H__ */
+diff --git a/include/configs/qi_lb60.h b/include/configs/qi_lb60.h
+index 7bff444..7b33be0 100644
+--- a/include/configs/qi_lb60.h
++++ b/include/configs/qi_lb60.h
+@@ -31,6 +31,15 @@
+ /*
+ * Miscellaneous configurable options
+ */
++#define CONFIG_JZ4740_MMC
++#define CONFIG_MMC 1
++#define CONFIG_FAT 1
++#define CONFIG_DOS_PARTITION 1
++#define CONFIG_CMD_MMC
++#define CONFIG_CMD_FAT
++#define CONFIG_CMD_EXT2
++
++
+ #define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
+ #define CONFIG_SYS_INIT_SP_OFFSET 0x400000
+ #define CONFIG_SYS_LOAD_ADDR 0x80600000
+diff --git a/include/mmc.h b/include/mmc.h
+index a13e2bd..3c4761c 100644
+--- a/include/mmc.h
++++ b/include/mmc.h
+@@ -283,4 +283,44 @@ struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode);
+ int mmc_legacy_init(int verbose);
+ #endif
+
++struct mmc_csd
++{
++ u8 csd_structure:2,
++ spec_vers:4,
++ rsvd1:2;
++ u8 taac;
++ u8 nsac;
++ u8 tran_speed;
++ u16 ccc:12,
++ read_bl_len:4;
++ u32 c_size:22;
++ u64 read_bl_partial:1,
++ write_blk_misalign:1,
++ read_blk_misalign:1,
++ dsr_imp:1,
++ rsvd2:2,
++ vdd_r_curr_min:3,
++ vdd_r_curr_max:3,
++ vdd_w_curr_min:3,
++ vdd_w_curr_max:3,
++ c_size_mult:3,
++ sector_size:5,
++ erase_grp_size:5,
++ wp_grp_size:5,
++ wp_grp_enable:1,
++ default_ecc:2,
++ r2w_factor:3,
++ write_bl_len:4,
++ write_bl_partial:1,
++ rsvd3:5;
++ u8 file_format_grp:1,
++ copy:1,
++ perm_write_protect:1,
++ tmp_write_protect:1,
++ file_format:2,
++ ecc:2;
++ u8 crc:7;
++ u8 one:1;
++};
++
+ #endif /* _MMC_H_ */
+--
+1.7.9.5
+
diff --git a/package/boot/uboot-xburst/patches/0004-add-more-boot-options-F1-F2-F3-F4-M-S.patch b/package/boot/uboot-xburst/patches/0004-add-more-boot-options-F1-F2-F3-F4-M-S.patch
new file mode 100644
index 0000000..73e0324
--- /dev/null
+++ b/package/boot/uboot-xburst/patches/0004-add-more-boot-options-F1-F2-F3-F4-M-S.patch
@@ -0,0 +1,200 @@
+From c52b6168979d03fc31205444c3278c537787472a Mon Sep 17 00:00:00 2001
+From: Xiangfu <xiangfu@openmobilefree.net>
+Date: Wed, 10 Oct 2012 18:39:55 +0800
+Subject: [PATCH 4/6] add more boot options(F1/F2/F3/F4/M/S)
+
+---
+ arch/mips/include/asm/global_data.h | 3 +++
+ arch/mips/lib/bootm.c | 17 ++++++++++++++++-
+ board/qi/qi_lb60/qi_lb60.c | 26 +++++++++++++++++++++++---
+ common/main.c | 21 +++++++++++++++++++--
+ include/configs/qi_lb60.h | 32 ++++++++++++++++++++++++++++++++
+ 5 files changed, 93 insertions(+), 6 deletions(-)
+
+diff --git a/arch/mips/include/asm/global_data.h b/arch/mips/include/asm/global_data.h
+index 6e2cdc7..cd03d7e 100644
+--- a/arch/mips/include/asm/global_data.h
++++ b/arch/mips/include/asm/global_data.h
+@@ -59,6 +59,9 @@ typedef struct global_data {
+ unsigned long env_valid; /* Checksum of Environment valid? */
+ void **jt; /* jump table */
+ char env_buf[32]; /* buffer for getenv() before reloc. */
++#if defined(CONFIG_NANONOTE)
++ unsigned long boot_option;
++#endif
+ } gd_t;
+
+ #include <asm-generic/global_data_flags.h>
+diff --git a/arch/mips/lib/bootm.c b/arch/mips/lib/bootm.c
+index 608c1a7..e00416b 100644
+--- a/arch/mips/lib/bootm.c
++++ b/arch/mips/lib/bootm.c
+@@ -47,10 +47,25 @@ int do_bootm_linux(int flag, int argc, char * const argv[],
+ bootm_headers_t *images)
+ {
+ void (*theKernel) (int, char **, char **, int *);
+- char *commandline = getenv("bootargs");
++ char *commandline;
+ char env_buf[12];
+ char *cp;
+
++#if defined(CONFIG_NANONOTE)
++ if (gd->boot_option & BOOT_FROM_MEMCARD)
++ commandline = getenv ("bootargsfromsd");
++ else if (gd->boot_option & BOOT_WITH_F1)
++ commandline = getenv ("bootargsf1");
++ else if (gd->boot_option & BOOT_WITH_F2)
++ commandline = getenv ("bootargsf2");
++ else if (gd->boot_option & BOOT_WITH_F3)
++ commandline = getenv ("bootargsf3");
++ else if (gd->boot_option & BOOT_WITH_F4)
++ commandline = getenv ("bootargsf4");
++ else
++#endif
++ commandline = getenv ("bootargs");
++
+ if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+ return 1;
+
+diff --git a/board/qi/qi_lb60/qi_lb60.c b/board/qi/qi_lb60/qi_lb60.c
+index a2ba648..d622219 100644
+--- a/board/qi/qi_lb60/qi_lb60.c
++++ b/board/qi/qi_lb60/qi_lb60.c
+@@ -15,7 +15,7 @@ DECLARE_GLOBAL_DATA_PTR;
+
+ static void gpio_init(void)
+ {
+- unsigned int i;
++ unsigned int i, j;
+
+ /* Initialize NAND Flash Pins */
+ __gpio_as_nand();
+@@ -42,14 +42,34 @@ static void gpio_init(void)
+
+ if (__gpio_get_pin(GPIO_KEYIN_BASE + 2) == 0){
+ printf("[S] pressed, enable UART0\n");
++ gd->boot_option |= BOOT_WITH_ENABLE_UART;
+ __gpio_as_uart0();
+ } else {
+ __gpio_as_input(GPIO_KEYIN_8);
+ __gpio_enable_pull(GPIO_KEYIN_8);
+ }
+
+- /* enable the TP4, TP5 as UART0 */
+- __gpio_jtag_to_uart0();
++ if (__gpio_get_pin(GPIO_KEYIN_BASE + 3) == 0) {
++ printf("[M] pressed, boot from memory card\n");
++ gd->boot_option |= BOOT_FROM_MEMCARD;
++ __gpio_jtag_to_uart0();
++ }
++
++ for (j = 0; j < 4; j++) {
++ for (i = 0; i < 4; i++)
++ __gpio_set_pin(GPIO_KEYOUT_BASE + i);
++
++ __gpio_clear_pin(GPIO_KEYOUT_BASE + j);
++
++ if (__gpio_get_pin(GPIO_KEYIN_BASE) == 0) {
++ printf("[F%d] pressed", (j + 1));
++ gd->boot_option |= (1 << (j + 2));
++ /* BOOT_WITH_F1 (1 << 2) */
++ /* BOOT_WITH_F2 (1 << 3) */
++ /* BOOT_WITH_F3 (1 << 4) */
++ /* BOOT_WITH_F4 (1 << 5) */
++ }
++ }
+
+ __gpio_as_output(GPIO_AUDIO_POP);
+ __gpio_set_pin(GPIO_AUDIO_POP);
+diff --git a/common/main.c b/common/main.c
+index 9507cec..dbfb7ca 100644
+--- a/common/main.c
++++ b/common/main.c
+@@ -355,7 +355,11 @@ void main_loop (void)
+ #if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0)
+ s = getenv ("bootdelay");
+ bootdelay = s ? (int)simple_strtol(s, NULL, 10) : CONFIG_BOOTDELAY;
+-
++#if defined(CONFIG_NANONOTE)
++ DECLARE_GLOBAL_DATA_PTR;
++ if (gd->boot_option & BOOT_WITH_ENABLE_UART)
++ bootdelay = 3;
++# endif
+ debug ("### main_loop entered: bootdelay=%d\n\n", bootdelay);
+
+ #if defined(CONFIG_MENU_SHOW)
+@@ -379,7 +383,20 @@ void main_loop (void)
+ }
+ else
+ #endif /* CONFIG_BOOTCOUNT_LIMIT */
+- s = getenv ("bootcmd");
++#if defined(CONFIG_NANONOTE)
++ if (gd->boot_option & BOOT_FROM_MEMCARD)
++ s = getenv ("bootcmdfromsd");
++ else if (gd->boot_option & BOOT_WITH_F1)
++ s = getenv ("bootcmdf1");
++ else if (gd->boot_option & BOOT_WITH_F2)
++ s = getenv ("bootcmdf2");
++ else if (gd->boot_option & BOOT_WITH_F3)
++ s = getenv ("bootcmdf3");
++ else if (gd->boot_option & BOOT_WITH_F4)
++ s = getenv ("bootcmdf4");
++ else
++#endif
++ s = getenv ("bootcmd");
+
+ debug ("### main_loop: bootcmd=\"%s\"\n", s ? s : "<UNDEFINED>");
+
+diff --git a/include/configs/qi_lb60.h b/include/configs/qi_lb60.h
+index 7b33be0..52b370c 100644
+--- a/include/configs/qi_lb60.h
++++ b/include/configs/qi_lb60.h
+@@ -31,6 +31,7 @@
+ /*
+ * Miscellaneous configurable options
+ */
++#define CONFIG_NANONOTE
+ #define CONFIG_JZ4740_MMC
+ #define CONFIG_MMC 1
+ #define CONFIG_FAT 1
+@@ -39,6 +40,37 @@
+ #define CONFIG_CMD_FAT
+ #define CONFIG_CMD_EXT2
+
++#define CONFIG_CMD_UBIFS
++#define CONFIG_CMD_UBI
++#define CONFIG_MTD_PARTITIONS
++#define CONFIG_MTD_DEVICE
++#define CONFIG_CMD_MTDPARTS
++#define CONFIG_CMD_UBI
++#define CONFIG_CMD_UBIFS
++#define CONFIG_LZO
++#define CONFIG_RBTREE
++
++#define MTDIDS_DEFAULT "nand0=jz4740-nand"
++#define MTDPARTS_DEFAULT "mtdparts=jz4740-nand:4M@0(uboot)ro,4M@4M(kernel)ro,512M@8M(rootfs)ro,-(data)ro"
++
++#define BOOT_FROM_MEMCARD 1
++#define BOOT_WITH_ENABLE_UART (1 << 1) /* Vaule for global_data.h gd->boot_option */
++#define BOOT_WITH_F1 (1 << 2)
++#define BOOT_WITH_F2 (1 << 3)
++#define BOOT_WITH_F3 (1 << 4)
++#define BOOT_WITH_F4 (1 << 5)
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ "bootcmdfromsd=mmc init; ext2load mmc 0 0x80600000 /boot/uImage; bootm;\0" \
++ "bootargsfromsd=mem=32M console=tty0 console=ttyS0,57600n8 rootfstype=ext2 root=/dev/mmcblk0p1 rw rootwait\0" \
++ "bootcmdf1=mmc init; ext2load mmc 0:1 0x80600000 /boot/uImage; bootm;\0" \
++ "bootargsf1=mem=32M console=tty0 console=ttyS0,57600n8 rootfstype=ext2 root=/dev/mmcblk0p1 rw rootwait\0" \
++ "bootcmdf2=mmc init; ext2load mmc 0:2 0x80600000 /boot/uImage; bootm;\0" \
++ "bootargsf2=mem=32M console=tty0 console=ttyS0,57600n8 rootfstype=ext2 root=/dev/mmcblk0p2 rw rootwait\0" \
++ "bootcmdf3=mmc init; ext2load mmc 0:3 0x80600000 /boot/uImage; bootm;\0" \
++ "bootargsf3=mem=32M console=tty0 console=ttyS0,57600n8 rootfstype=ext2 root=/dev/mmcblk0p3 rw rootwait\0" \
++ "bootcmdf4=mtdparts default;ubi part rootfs;ubifsmount rootfs;ubifsload 0x80600000 /boot/uImage; bootm;\0" \
++ "bootargsf4=mem=32M console=tty0 console=ttyS0,57600n8 ubi.mtd=2 rootfstype=ubifs root=ubi0:rootfs rw rootwait"
+
+ #define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
+ #define CONFIG_SYS_INIT_SP_OFFSET 0x400000
+--
+1.7.9.5
+
diff --git a/package/boot/uboot-xburst/patches/0005-add-nanonote-lcd-support.patch b/package/boot/uboot-xburst/patches/0005-add-nanonote-lcd-support.patch
new file mode 100644
index 0000000..2c550f7
--- /dev/null
+++ b/package/boot/uboot-xburst/patches/0005-add-nanonote-lcd-support.patch
@@ -0,0 +1,847 @@
+From ca8c5216cfd3ad3fda9867ed2d157ae5a209834b Mon Sep 17 00:00:00 2001
+From: Xiangfu <xiangfu@openmobilefree.net>
+Date: Wed, 10 Oct 2012 22:05:27 +0800
+Subject: [PATCH 5/6] add nanonote lcd support
+
+---
+ arch/mips/include/asm/global_data.h | 1 +
+ arch/mips/include/asm/jz4740.h | 90 ++++++++
+ arch/mips/lib/board.c | 6 +
+ common/lcd.c | 9 +-
+ drivers/video/Makefile | 1 +
+ drivers/video/nanonote_gpm940b0.c | 400 +++++++++++++++++++++++++++++++++++
+ drivers/video/nanonote_gpm940b0.h | 135 ++++++++++++
+ include/configs/qi_lb60.h | 7 +
+ include/lcd.h | 52 ++++-
+ 9 files changed, 697 insertions(+), 4 deletions(-)
+ create mode 100644 drivers/video/nanonote_gpm940b0.c
+ create mode 100644 drivers/video/nanonote_gpm940b0.h
+
+diff --git a/arch/mips/include/asm/global_data.h b/arch/mips/include/asm/global_data.h
+index cd03d7e..7cec2de 100644
+--- a/arch/mips/include/asm/global_data.h
++++ b/arch/mips/include/asm/global_data.h
+@@ -44,6 +44,7 @@ typedef struct global_data {
+ unsigned long per_clk; /* Peripheral bus clock */
+ unsigned long mem_clk; /* Memory bus clock */
+ unsigned long dev_clk; /* Device clock */
++ unsigned long fb_base; /* base address of framebuffer */
+ /* "static data" needed by most of timer.c */
+ unsigned long tbl;
+ unsigned long lastinc;
+diff --git a/arch/mips/include/asm/jz4740.h b/arch/mips/include/asm/jz4740.h
+index 68287fb..13724a2 100644
+--- a/arch/mips/include/asm/jz4740.h
++++ b/arch/mips/include/asm/jz4740.h
+@@ -1312,5 +1312,95 @@ do { \
+ while (REG_MSC_STAT & MSC_STAT_IS_RESETTING); \
+ } while (0)
+
++/*************************************************************************
++ * LCD (LCD Controller)
++ *************************************************************************/
++#define REG32(addr) *((volatile u32 *)(addr))
++
++#define CPM_BASE 0xB0000000
++#define CPM_CPCCR (CPM_BASE+0x00)
++#define REG_CPM_CPCCR REG32(CPM_CPCCR)
++
++#define LCD_BASE 0xB3050000
++#define LCD_CFG (LCD_BASE + 0x00) /* LCD Configure Register */
++#define LCD_VSYNC (LCD_BASE + 0x04) /* Vertical Synchronize Register */
++#define LCD_HSYNC (LCD_BASE + 0x08) /* Horizontal Synchronize Register */
++#define LCD_VAT (LCD_BASE + 0x0c) /* Virtual Area Setting Register */
++#define LCD_DAH (LCD_BASE + 0x10) /* Display Area Horizontal Start/End Point */
++#define LCD_DAV (LCD_BASE + 0x14) /* Display Area Vertical Start/End Point */
++#define LCD_PS (LCD_BASE + 0x18) /* PS Signal Setting */
++#define LCD_CLS (LCD_BASE + 0x1c) /* CLS Signal Setting */
++#define LCD_SPL (LCD_BASE + 0x20) /* SPL Signal Setting */
++#define LCD_REV (LCD_BASE + 0x24) /* REV Signal Setting */
++#define LCD_CTRL (LCD_BASE + 0x30) /* LCD Control Register */
++#define LCD_STATE (LCD_BASE + 0x34) /* LCD Status Register */
++#define LCD_IID (LCD_BASE + 0x38) /* Interrupt ID Register */
++#define LCD_DA0 (LCD_BASE + 0x40) /* Descriptor Address Register 0 */
++#define LCD_SA0 (LCD_BASE + 0x44) /* Source Address Register 0 */
++#define LCD_FID0 (LCD_BASE + 0x48) /* Frame ID Register 0 */
++#define LCD_CMD0 (LCD_BASE + 0x4c) /* DMA Command Register 0 */
++#define LCD_DA1 (LCD_BASE + 0x50) /* Descriptor Address Register 1 */
++#define LCD_SA1 (LCD_BASE + 0x54) /* Source Address Register 1 */
++#define LCD_FID1 (LCD_BASE + 0x58) /* Frame ID Register 1 */
++#define LCD_CMD1 (LCD_BASE + 0x5c) /* DMA Command Register 1 */
++
++#define REG_LCD_CFG REG32(LCD_CFG)
++#define REG_LCD_VSYNC REG32(LCD_VSYNC)
++#define REG_LCD_HSYNC REG32(LCD_HSYNC)
++#define REG_LCD_VAT REG32(LCD_VAT)
++#define REG_LCD_DAH REG32(LCD_DAH)
++#define REG_LCD_DAV REG32(LCD_DAV)
++#define REG_LCD_PS REG32(LCD_PS)
++#define REG_LCD_CLS REG32(LCD_CLS)
++#define REG_LCD_SPL REG32(LCD_SPL)
++#define REG_LCD_REV REG32(LCD_REV)
++#define REG_LCD_CTRL REG32(LCD_CTRL)
++#define REG_LCD_STATE REG32(LCD_STATE)
++#define REG_LCD_IID REG32(LCD_IID)
++#define REG_LCD_DA0 REG32(LCD_DA0)
++#define REG_LCD_SA0 REG32(LCD_SA0)
++#define REG_LCD_FID0 REG32(LCD_FID0)
++#define REG_LCD_CMD0 REG32(LCD_CMD0)
++#define REG_LCD_DA1 REG32(LCD_DA1)
++#define REG_LCD_SA1 REG32(LCD_SA1)
++#define REG_LCD_FID1 REG32(LCD_FID1)
++#define REG_LCD_CMD1 REG32(LCD_CMD1)
++
++#define LCD_CTRL_BPP_BIT 0 /* Bits Per Pixel */
++#define LCD_CTRL_BPP_MASK (0x07 << LCD_CTRL_BPP_BIT)
++ #define LCD_CTRL_BPP_1 (0 << LCD_CTRL_BPP_BIT) /* 1 bpp */
++ #define LCD_CTRL_BPP_2 (1 << LCD_CTRL_BPP_BIT) /* 2 bpp */
++ #define LCD_CTRL_BPP_4 (2 << LCD_CTRL_BPP_BIT) /* 4 bpp */
++ #define LCD_CTRL_BPP_8 (3 << LCD_CTRL_BPP_BIT) /* 8 bpp */
++ #define LCD_CTRL_BPP_16 (4 << LCD_CTRL_BPP_BIT) /* 15/16 bpp */
++ #define LCD_CTRL_BPP_18_24 (5 << LCD_CTRL_BPP_BIT) /* 18/24/32 bpp */
++
++#define LCD_CTRL_BST_BIT 28 /* Burst Length Selection */
++#define LCD_CTRL_BST_MASK (0x03 << LCD_CTRL_BST_BIT)
++ #define LCD_CTRL_BST_4 (0 << LCD_CTRL_BST_BIT) /* 4-word */
++ #define LCD_CTRL_BST_8 (1 << LCD_CTRL_BST_BIT) /* 8-word */
++ #define LCD_CTRL_BST_16 (2 << LCD_CTRL_BST_BIT) /* 16-word */
++#define LCD_CTRL_RGB565 (0 << 27) /* RGB565 mode */
++#define LCD_CTRL_RGB555 (1 << 27) /* RGB555 mode */
++#define LCD_CTRL_OFUP (1 << 26) /* Output FIFO underrun protection enable */
++#define LCD_CTRL_FRC_BIT 24 /* STN FRC Algorithm Selection */
++#define LCD_CTRL_FRC_MASK (0x03 << LCD_CTRL_FRC_BIT)
++ #define LCD_CTRL_FRC_16 (0 << LCD_CTRL_FRC_BIT) /* 16 grayscale */
++ #define LCD_CTRL_FRC_4 (1 << LCD_CTRL_FRC_BIT) /* 4 grayscale */
++ #define LCD_CTRL_FRC_2 (2 << LCD_CTRL_FRC_BIT) /* 2 grayscale */
++
++#define CPM_LPCDR (CPM_BASE+0x64)
++#define CPM_CLKGR (CPM_BASE+0x20)
++#define REG_CPM_LPCDR REG32(CPM_LPCDR)
++#define REG_CPM_CLKGR REG32(CPM_CLKGR)
++
++#define __cpm_start_tcu() (REG_CPM_CLKGR &= ~CPM_CLKGR_TCU)
++#define __cpm_stop_lcd() (REG_CPM_CLKGR |= CPM_CLKGR_LCD)
++#define __cpm_set_pixdiv(v) \
++ (REG_CPM_LPCDR = (REG_CPM_LPCDR & ~CPM_LPCDR_PIXDIV_MASK) | ((v) << (CPM_LPCDR_PIXDIV_BIT)))
++#define __cpm_set_ldiv(v) \
++ (REG_CPM_CPCCR = (REG_CPM_CPCCR & ~CPM_CPCCR_LDIV_MASK) | ((v) << (CPM_CPCCR_LDIV_BIT)))
++#define __cpm_start_lcd() (REG_CPM_CLKGR &= ~CPM_CLKGR_LCD)
++
+ #endif /* !__ASSEMBLY__ */
+ #endif /* __JZ4740_H__ */
+diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c
+index b14b33e..c2e64d9 100644
+--- a/arch/mips/lib/board.c
++++ b/arch/mips/lib/board.c
+@@ -172,6 +172,12 @@ void board_init_f(ulong bootflag)
+ addr &= ~(4096 - 1);
+ debug("Top of RAM usable for U-Boot at: %08lx\n", addr);
+
++#ifdef CONFIG_LCD
++ /* reserve memory for LCD display (always full pages) */
++ addr = lcd_setmem (addr);
++ gd->fb_base = addr;
++#endif /* CONFIG_LCD */
++
+ /* Reserve memory for U-Boot code, data & bss
+ * round down to next 16 kB limit
+ */
+diff --git a/common/lcd.c b/common/lcd.c
+index b6be800..af1281a 100644
+--- a/common/lcd.c
++++ b/common/lcd.c
+@@ -263,6 +263,13 @@ static void lcd_drawchars(ushort x, ushort y, uchar *str, int count)
+ lcd_color_fg : lcd_color_bg;
+ bits <<= 1;
+ }
++#elif LCD_BPP == LCD_COLOR32
++ uint *m = (uint *)d;
++ for (c=0; c<32; ++c) {
++ *m++ = (bits & 0x80) ?
++ lcd_color_fg : lcd_color_bg;
++ bits <<= 1;
++ }
+ #endif
+ }
+ #if LCD_BPP == LCD_MONOCHROME
+@@ -509,7 +516,7 @@ static inline ushort *configuration_get_cmap(void)
+ return (ushort *)&(cp->lcd_cmap[255 * sizeof(ushort)]);
+ #elif defined(CONFIG_ATMEL_LCD)
+ return (ushort *)(panel_info.mmio + ATMEL_LCDC_LUT(0));
+-#elif !defined(CONFIG_ATMEL_HLCD) && !defined(CONFIG_EXYNOS_FB)
++#elif !defined(CONFIG_ATMEL_HLCD) && !defined(CONFIG_EXYNOS_FB) && !defined(CONFIG_VIDEO_GPM940B0)
+ return panel_info.cmap;
+ #else
+ #if defined(CONFIG_LCD_LOGO)
+diff --git a/drivers/video/Makefile b/drivers/video/Makefile
+index ebb6da8..03625bc 100644
+--- a/drivers/video/Makefile
++++ b/drivers/video/Makefile
+@@ -50,6 +50,7 @@ COBJS-$(CONFIG_VIDEO_SED13806) += sed13806.o
+ COBJS-$(CONFIG_VIDEO_SM501) += sm501.o
+ COBJS-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o videomodes.o
+ COBJS-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o
++COBJS-$(CONFIG_VIDEO_GPM940B0) += nanonote_gpm940b0.o
+
+ COBJS := $(sort $(COBJS-y))
+ SRCS := $(COBJS:.o=.c)
+diff --git a/drivers/video/nanonote_gpm940b0.c b/drivers/video/nanonote_gpm940b0.c
+new file mode 100644
+index 0000000..11efb72
+--- /dev/null
++++ b/drivers/video/nanonote_gpm940b0.c
+@@ -0,0 +1,400 @@
++/*
++ * JzRISC lcd controller
++ *
++ * Xiangfu Liu <xiangfu@sharism.cc>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <config.h>
++#include <common.h>
++#include <lcd.h>
++
++#include <asm/io.h> /* virt_to_phys() */
++#include <asm/jz4740.h>
++
++#include "nanonote_gpm940b0.h"
++
++#define align2(n) (n)=((((n)+1)>>1)<<1)
++#define align4(n) (n)=((((n)+3)>>2)<<2)
++#define align8(n) (n)=((((n)+7)>>3)<<3)
++
++struct jzfb_info {
++ unsigned int cfg; /* panel mode and pin usage etc. */
++ unsigned int w;
++ unsigned int h;
++ unsigned int bpp; /* bit per pixel */
++ unsigned int fclk; /* frame clk */
++ unsigned int hsw; /* hsync width, in pclk */
++ unsigned int vsw; /* vsync width, in line count */
++ unsigned int elw; /* end of line, in pclk */
++ unsigned int blw; /* begin of line, in pclk */
++ unsigned int efw; /* end of frame, in line count */
++ unsigned int bfw; /* begin of frame, in line count */
++};
++
++static struct jzfb_info jzfb = {
++ MODE_8BIT_SERIAL_TFT | PCLK_N | HSYNC_N | VSYNC_N,
++ 320, 240, 32, 70, 1, 1, 273, 140, 1, 20
++};
++
++vidinfo_t panel_info = {
++ 320, 240, LCD_BPP,
++};
++
++void *lcd_base;
++void *lcd_console_address;
++int lcd_line_length;
++int lcd_color_fg;
++int lcd_color_bg;
++short console_col;
++short console_row;
++
++static int jz_lcd_init_mem(void *lcdbase, vidinfo_t *vid)
++{
++ u_long palette_mem_size;
++ struct jz_fb_info *fbi = &vid->jz_fb;
++ int fb_size = vid->vl_row * (vid->vl_col * NBITS (vid->vl_bpix)) / 8;
++
++ fbi->screen = (u_long)lcdbase;
++ fbi->palette_size = 256;
++ palette_mem_size = fbi->palette_size * sizeof(u16);
++
++ debug("jz_lcd.c palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
++ /* locate palette and descs at end of page following fb */
++ fbi->palette = (u_long)lcdbase + fb_size + PAGE_SIZE - palette_mem_size;
++
++ return 0;
++}
++
++static void jz_lcd_desc_init(vidinfo_t *vid)
++{
++ struct jz_fb_info * fbi;
++ fbi = &vid->jz_fb;
++ fbi->dmadesc_fblow = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 3*16);
++ fbi->dmadesc_fbhigh = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 2*16);
++ fbi->dmadesc_palette = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 1*16);
++
++ #define BYTES_PER_PANEL (vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8)
++
++ /* populate descriptors */
++ fbi->dmadesc_fblow->fdadr = virt_to_phys(fbi->dmadesc_fblow);
++ fbi->dmadesc_fblow->fsadr = virt_to_phys((void *)(fbi->screen + BYTES_PER_PANEL));
++ fbi->dmadesc_fblow->fidr = 0;
++ fbi->dmadesc_fblow->ldcmd = BYTES_PER_PANEL / 4 ;
++
++ fbi->fdadr1 = virt_to_phys(fbi->dmadesc_fblow); /* only used in dual-panel mode */
++
++ fbi->dmadesc_fbhigh->fsadr = virt_to_phys((void *)fbi->screen);
++ fbi->dmadesc_fbhigh->fidr = 0;
++ fbi->dmadesc_fbhigh->ldcmd = BYTES_PER_PANEL / 4; /* length in word */
++
++ fbi->dmadesc_palette->fsadr = virt_to_phys((void *)fbi->palette);
++ fbi->dmadesc_palette->fidr = 0;
++ fbi->dmadesc_palette->ldcmd = (fbi->palette_size * 2)/4 | (1<<28);
++
++ if(NBITS(vid->vl_bpix) < 12) {
++ /* assume any mode with <12 bpp is palette driven */
++ fbi->dmadesc_palette->fdadr = virt_to_phys(fbi->dmadesc_fbhigh);
++ fbi->dmadesc_fbhigh->fdadr = virt_to_phys(fbi->dmadesc_palette);
++ /* flips back and forth between pal and fbhigh */
++ fbi->fdadr0 = virt_to_phys(fbi->dmadesc_palette);
++ } else {
++ /* palette shouldn't be loaded in true-color mode */
++ fbi->dmadesc_fbhigh->fdadr = virt_to_phys((void *)fbi->dmadesc_fbhigh);
++ fbi->fdadr0 = virt_to_phys(fbi->dmadesc_fbhigh); /* no pal just fbhigh */
++ }
++}
++
++static int jz_lcd_hw_init(vidinfo_t *vid)
++{
++ struct jz_fb_info *fbi = &vid->jz_fb;
++ unsigned int val = 0;
++ unsigned int pclk;
++ unsigned int stnH;
++ int pll_div;
++
++ /* Setting Control register */
++ switch (jzfb.bpp) {
++ case 1:
++ val |= LCD_CTRL_BPP_1;
++ break;
++ case 2:
++ val |= LCD_CTRL_BPP_2;
++ break;
++ case 4:
++ val |= LCD_CTRL_BPP_4;
++ break;
++ case 8:
++ val |= LCD_CTRL_BPP_8;
++ break;
++ case 15:
++ val |= LCD_CTRL_RGB555;
++ case 16:
++ val |= LCD_CTRL_BPP_16;
++ break;
++ case 17 ... 32:
++ val |= LCD_CTRL_BPP_18_24; /* target is 4bytes/pixel */
++ break;
++
++ default:
++ printf("jz_lcd.c The BPP %d is not supported\n", jzfb.bpp);
++ val |= LCD_CTRL_BPP_16;
++ break;
++ }
++
++ switch (jzfb.cfg & MODE_MASK) {
++ case MODE_STN_MONO_DUAL:
++ case MODE_STN_COLOR_DUAL:
++ case MODE_STN_MONO_SINGLE:
++ case MODE_STN_COLOR_SINGLE:
++ switch (jzfb.bpp) {
++ case 1:
++ /* val |= LCD_CTRL_PEDN; */
++ case 2:
++ val |= LCD_CTRL_FRC_2;
++ break;
++ case 4:
++ val |= LCD_CTRL_FRC_4;
++ break;
++ case 8:
++ default:
++ val |= LCD_CTRL_FRC_16;
++ break;
++ }
++ break;
++ }
++
++ val |= LCD_CTRL_BST_16; /* Burst Length is 16WORD=64Byte */
++ val |= LCD_CTRL_OFUP; /* OutFIFO underrun protect */
++
++ switch (jzfb.cfg & MODE_MASK) {
++ case MODE_STN_MONO_DUAL:
++ case MODE_STN_COLOR_DUAL:
++ case MODE_STN_MONO_SINGLE:
++ case MODE_STN_COLOR_SINGLE:
++ switch (jzfb.cfg & STN_DAT_PINMASK) {
++ case STN_DAT_PIN1:
++ /* Do not adjust the hori-param value. */
++ break;
++ case STN_DAT_PIN2:
++ align2(jzfb.hsw);
++ align2(jzfb.elw);
++ align2(jzfb.blw);
++ break;
++ case STN_DAT_PIN4:
++ align4(jzfb.hsw);
++ align4(jzfb.elw);
++ align4(jzfb.blw);
++ break;
++ case STN_DAT_PIN8:
++ align8(jzfb.hsw);
++ align8(jzfb.elw);
++ align8(jzfb.blw);
++ break;
++ }
++ break;
++ }
++
++ REG_LCD_CTRL = val;
++
++ switch (jzfb.cfg & MODE_MASK) {
++ case MODE_STN_MONO_DUAL:
++ case MODE_STN_COLOR_DUAL:
++ case MODE_STN_MONO_SINGLE:
++ case MODE_STN_COLOR_SINGLE:
++ if (((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL) ||
++ ((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL))
++ stnH = jzfb.h >> 1;
++ else
++ stnH = jzfb.h;
++
++ REG_LCD_VSYNC = (0 << 16) | jzfb.vsw;
++ REG_LCD_HSYNC = ((jzfb.blw+jzfb.w) << 16) | (jzfb.blw+jzfb.w+jzfb.hsw);
++
++ /* Screen setting */
++ REG_LCD_VAT = ((jzfb.blw + jzfb.w + jzfb.hsw + jzfb.elw) << 16) | (stnH + jzfb.vsw + jzfb.bfw + jzfb.efw);
++ REG_LCD_DAH = (jzfb.blw << 16) | (jzfb.blw + jzfb.w);
++ REG_LCD_DAV = (0 << 16) | (stnH);
++
++ /* AC BIAs signal */
++ REG_LCD_PS = (0 << 16) | (stnH+jzfb.vsw+jzfb.efw+jzfb.bfw);
++
++ break;
++
++ case MODE_TFT_GEN:
++ case MODE_TFT_SHARP:
++ case MODE_TFT_CASIO:
++ case MODE_TFT_SAMSUNG:
++ case MODE_8BIT_SERIAL_TFT:
++ case MODE_TFT_18BIT:
++ REG_LCD_VSYNC = (0 << 16) | jzfb.vsw;
++ REG_LCD_HSYNC = (0 << 16) | jzfb.hsw;
++ REG_LCD_DAV =((jzfb.vsw+jzfb.bfw) << 16) | (jzfb.vsw +jzfb.bfw+jzfb.h);
++ REG_LCD_DAH = ((jzfb.hsw + jzfb.blw) << 16) | (jzfb.hsw + jzfb.blw + jzfb.w );
++ REG_LCD_VAT = (((jzfb.blw + jzfb.w + jzfb.elw + jzfb.hsw)) << 16) \
++ | (jzfb.vsw + jzfb.bfw + jzfb.h + jzfb.efw);
++ break;
++ }
++
++ switch (jzfb.cfg & MODE_MASK) {
++ case MODE_TFT_SAMSUNG:
++ {
++ unsigned int total, tp_s, tp_e, ckv_s, ckv_e;
++ unsigned int rev_s, rev_e, inv_s, inv_e;
++
++ pclk = val * (jzfb.w + jzfb.hsw + jzfb.elw + jzfb.blw) *
++ (jzfb.h + jzfb.vsw + jzfb.efw + jzfb.bfw); /* Pixclk */
++
++ total = jzfb.blw + jzfb.w + jzfb.elw + jzfb.hsw;
++ tp_s = jzfb.blw + jzfb.w + 1;
++ tp_e = tp_s + 1;
++ ckv_s = tp_s - pclk/(1000000000/4100);
++ ckv_e = tp_s + total;
++ rev_s = tp_s - 11; /* -11.5 clk */
++ rev_e = rev_s + total;
++ inv_s = tp_s;
++ inv_e = inv_s + total;
++ REG_LCD_CLS = (tp_s << 16) | tp_e;
++ REG_LCD_PS = (ckv_s << 16) | ckv_e;
++ REG_LCD_SPL = (rev_s << 16) | rev_e;
++ REG_LCD_REV = (inv_s << 16) | inv_e;
++ jzfb.cfg |= STFT_REVHI | STFT_SPLHI;
++ break;
++ }
++ case MODE_TFT_SHARP:
++ {
++ unsigned int total, cls_s, cls_e, ps_s, ps_e;
++ unsigned int spl_s, spl_e, rev_s, rev_e;
++ total = jzfb.blw + jzfb.w + jzfb.elw + jzfb.hsw;
++ spl_s = 1;
++ spl_e = spl_s + 1;
++ cls_s = 0;
++ cls_e = total - 60; /* > 4us (pclk = 80ns) */
++ ps_s = cls_s;
++ ps_e = cls_e;
++ rev_s = total - 40; /* > 3us (pclk = 80ns) */
++ rev_e = rev_s + total;
++ jzfb.cfg |= STFT_PSHI;
++ REG_LCD_SPL = (spl_s << 16) | spl_e;
++ REG_LCD_CLS = (cls_s << 16) | cls_e;
++ REG_LCD_PS = (ps_s << 16) | ps_e;
++ REG_LCD_REV = (rev_s << 16) | rev_e;
++ break;
++ }
++ case MODE_TFT_CASIO:
++ break;
++ }
++
++ /* Configure the LCD panel */
++ REG_LCD_CFG = jzfb.cfg;
++
++ /* Timing setting */
++ __cpm_stop_lcd();
++
++ val = jzfb.fclk; /* frame clk */
++ if ( (jzfb.cfg & MODE_MASK) != MODE_8BIT_SERIAL_TFT) {
++ pclk = val * (jzfb.w + jzfb.hsw + jzfb.elw + jzfb.blw) *
++ (jzfb.h + jzfb.vsw + jzfb.efw + jzfb.bfw); /* Pixclk */
++ } else {
++ /* serial mode: Hsync period = 3*Width_Pixel */
++ pclk = val * (jzfb.w*3 + jzfb.hsw + jzfb.elw + jzfb.blw) *
++ (jzfb.h + jzfb.vsw + jzfb.efw + jzfb.bfw); /* Pixclk */
++ }
++
++ if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_SINGLE) ||
++ ((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL))
++ pclk = (pclk * 3);
++
++ if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_SINGLE) ||
++ ((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL) ||
++ ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_SINGLE) ||
++ ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL))
++ pclk = pclk >> ((jzfb.cfg & STN_DAT_PINMASK) >> 4);
++
++ if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL) ||
++ ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL))
++ pclk >>= 1;
++
++ pll_div = (REG_CPM_CPCCR & CPM_CPCCR_PCS); /* clock source,0:pllout/2 1: pllout */
++ pll_div = pll_div ? 1 : 2;
++ val = (__cpm_get_pllout() / pll_div) / pclk;
++ val--;
++ if (val > 0x1ff) {
++ printf("CPM_LPCDR too large, set it to 0x1ff\n");
++ val = 0x1ff;
++ }
++ __cpm_set_pixdiv(val);
++
++ val = pclk * 3 ; /* LCDClock > 2.5*Pixclock */
++ if (val > 150000000) {
++ printf("Warning: LCDClock=%d\n, LCDClock must less or equal to 150MHz.\n", val);
++ printf("Change LCDClock to 150MHz\n");
++ val = 150000000;
++ }
++ val = (__cpm_get_pllout() / pll_div) / val;
++ val--;
++ if (val > 0x1f) {
++ printf("CPM_CPCCR.LDIV too large, set it to 0x1f\n");
++ val = 0x1f;
++ }
++ __cpm_set_ldiv( val );
++ REG_CPM_CPCCR |= CPM_CPCCR_CE ; /* update divide */
++
++ __cpm_start_lcd();
++ udelay(1000);
++
++ REG_LCD_DA0 = fbi->fdadr0; /* frame descripter*/
++
++ if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL) ||
++ ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL))
++ REG_LCD_DA1 = fbi->fdadr1; /* frame descripter*/
++
++ return 0;
++}
++
++void lcd_ctrl_init (void *lcdbase)
++{
++ __lcd_display_pin_init();
++ __lcd_display_on() ;
++
++ jz_lcd_init_mem(lcdbase, &panel_info);
++ jz_lcd_desc_init(&panel_info);
++ jz_lcd_hw_init(&panel_info);
++
++}
++
++/*
++ * Before enabled lcd controller, lcd registers should be configured correctly.
++ */
++void lcd_enable (void)
++{
++ REG_LCD_CTRL &= ~(1<<4); /* LCDCTRL.DIS */
++ REG_LCD_CTRL |= 1<<3; /* LCDCTRL.ENA*/
++}
++
++void lcd_disable (void)
++{
++ REG_LCD_CTRL |= (1<<4);
++}
++
++void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue)
++{
++}
++
++void lcd_initcolregs (void)
++{
++}
+diff --git a/drivers/video/nanonote_gpm940b0.h b/drivers/video/nanonote_gpm940b0.h
+new file mode 100644
+index 0000000..efe491e
+--- /dev/null
++++ b/drivers/video/nanonote_gpm940b0.h
+@@ -0,0 +1,135 @@
++/*
++ * JzRISC lcd controller
++ *
++ * Xiangfu Liu <xiangfu@sharism.cc>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __QI_LB60_GPM940B0_H__
++#define __QI_LB60_GPM940B0_H__
++
++struct lcd_desc{
++ unsigned int next_desc; /* LCDDAx */
++ unsigned int databuf; /* LCDSAx */
++ unsigned int frame_id; /* LCDFIDx */
++ unsigned int cmd; /* LCDCMDx */
++};
++
++#define MODE_MASK 0x0f
++#define MODE_TFT_GEN 0x00
++#define MODE_TFT_SHARP 0x01
++#define MODE_TFT_CASIO 0x02
++#define MODE_TFT_SAMSUNG 0x03
++#define MODE_CCIR656_NONINT 0x04
++#define MODE_CCIR656_INT 0x05
++#define MODE_STN_COLOR_SINGLE 0x08
++#define MODE_STN_MONO_SINGLE 0x09
++#define MODE_STN_COLOR_DUAL 0x0a
++#define MODE_STN_MONO_DUAL 0x0b
++#define MODE_8BIT_SERIAL_TFT 0x0c
++
++#define MODE_TFT_18BIT (1<<7)
++
++#define STN_DAT_PIN1 (0x00 << 4)
++#define STN_DAT_PIN2 (0x01 << 4)
++#define STN_DAT_PIN4 (0x02 << 4)
++#define STN_DAT_PIN8 (0x03 << 4)
++#define STN_DAT_PINMASK STN_DAT_PIN8
++
++#define STFT_PSHI (1 << 15)
++#define STFT_CLSHI (1 << 14)
++#define STFT_SPLHI (1 << 13)
++#define STFT_REVHI (1 << 12)
++
++#define SYNC_MASTER (0 << 16)
++#define SYNC_SLAVE (1 << 16)
++
++#define DE_P (0 << 9)
++#define DE_N (1 << 9)
++
++#define PCLK_P (0 << 10)
++#define PCLK_N (1 << 10)
++
++#define HSYNC_P (0 << 11)
++#define HSYNC_N (1 << 11)
++
++#define VSYNC_P (0 << 8)
++#define VSYNC_N (1 << 8)
++
++#define DATA_NORMAL (0 << 17)
++#define DATA_INVERSE (1 << 17)
++
++
++/* Jz LCDFB supported I/O controls. */
++#define FBIOSETBACKLIGHT 0x4688
++#define FBIODISPON 0x4689
++#define FBIODISPOFF 0x468a
++#define FBIORESET 0x468b
++#define FBIOPRINT_REG 0x468c
++
++/*
++ * LCD panel specific definition
++ */
++#define MODE (0xc9) /* 8bit serial RGB */
++
++#define __spi_write_reg1(reg, val) \
++do { \
++ unsigned char no; \
++ unsigned short value; \
++ unsigned char a=reg; \
++ unsigned char b=val; \
++ __gpio_set_pin(SPEN); \
++ __gpio_set_pin(SPCK); \
++ __gpio_clear_pin(SPDA); \
++ __gpio_clear_pin(SPEN); \
++ value=((a<<8)|(b&0xFF)); \
++ for(no=0;no<16;no++) \
++ { \
++ __gpio_clear_pin(SPCK); \
++ if((value&0x8000)==0x8000) \
++ __gpio_set_pin(SPDA); \
++ else \
++ __gpio_clear_pin(SPDA); \
++ __gpio_set_pin(SPCK); \
++ value=(value<<1); \
++ } \
++ __gpio_set_pin(SPEN); \
++} while (0)
++
++#define __lcd_display_pin_init() \
++do { \
++ __cpm_start_tcu(); \
++ __gpio_as_output(SPEN); /* use SPDA */ \
++ __gpio_as_output(SPCK); /* use SPCK */ \
++ __gpio_as_output(SPDA); /* use SPDA */ \
++} while (0)
++
++#define __lcd_display_on() \
++do { \
++ __spi_write_reg1(0x05, 0x1e); \
++ __spi_write_reg1(0x05, 0x5e); \
++ __spi_write_reg1(0x07, 0x8d); \
++ __spi_write_reg1(0x13, 0x01); \
++ __spi_write_reg1(0x05, 0x5f); \
++} while (0)
++
++#define __lcd_display_off() \
++do { \
++ __spi_write_reg1(0x05, 0x5e); \
++} while (0)
++
++#endif /* __QI_LB60_GPM940B0_H__ */
+diff --git a/include/configs/qi_lb60.h b/include/configs/qi_lb60.h
+index 52b370c..d3e78ad 100644
+--- a/include/configs/qi_lb60.h
++++ b/include/configs/qi_lb60.h
+@@ -32,6 +32,13 @@
+ * Miscellaneous configurable options
+ */
+ #define CONFIG_NANONOTE
++
++#define CONFIG_LCD
++#define CONFIG_SYS_WHITE_ON_BLACK
++#define LCD_BPP LCD_COLOR32
++#define CONFIG_VIDEO_GPM940B0
++
++
+ #define CONFIG_JZ4740_MMC
+ #define CONFIG_MMC 1
+ #define CONFIG_FAT 1
+diff --git a/include/lcd.h b/include/lcd.h
+index 42070d7..6de5482 100644
+--- a/include/lcd.h
++++ b/include/lcd.h
+@@ -263,8 +263,44 @@ typedef struct vidinfo {
+
+ void init_panel_info(vidinfo_t *vid);
+
+-#else
++#elif defined(CONFIG_JZSOC)
++/*
++ * LCD controller stucture for JZSOC: JZ4740
++ */
++struct jz_fb_dma_descriptor {
++ u_long fdadr; /* Frame descriptor address register */
++ u_long fsadr; /* Frame source address register */
++ u_long fidr; /* Frame ID register */
++ u_long ldcmd; /* Command register */
++};
++
++/*
++ * Jz LCD info
++ */
++struct jz_fb_info {
++
++ u_long fdadr0; /* physical address of frame/palette descriptor */
++ u_long fdadr1; /* physical address of frame descriptor */
++
++ /* DMA descriptors */
++ struct jz_fb_dma_descriptor * dmadesc_fblow;
++ struct jz_fb_dma_descriptor * dmadesc_fbhigh;
++ struct jz_fb_dma_descriptor * dmadesc_palette;
++ u_long screen; /* address of frame buffer */
++ u_long palette; /* address of palette memory */
++ u_int palette_size;
++};
++typedef struct vidinfo {
++ ushort vl_col; /* Number of columns (i.e. 640) */
++ ushort vl_row; /* Number of rows (i.e. 480) */
++ u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */
++
++ struct jz_fb_info jz_fb;
++} vidinfo_t;
++
++extern vidinfo_t panel_info;
+
++#else
+ typedef struct vidinfo {
+ ushort vl_col; /* Number of columns (i.e. 160) */
+ ushort vl_row; /* Number of rows (i.e. 100) */
+@@ -318,6 +354,7 @@ void lcd_show_board_info(void);
+ #define LCD_COLOR4 2
+ #define LCD_COLOR8 3
+ #define LCD_COLOR16 4
++#define LCD_COLOR32 5
+
+ /*----------------------------------------------------------------------*/
+ #if defined(CONFIG_LCD_INFO_BELOW_LOGO)
+@@ -369,7 +406,7 @@ void lcd_show_board_info(void);
+ # define CONSOLE_COLOR_GREY 14
+ # define CONSOLE_COLOR_WHITE 15 /* Must remain last / highest */
+
+-#else
++#elif LCD_BPP == LCD_COLOR16
+
+ /*
+ * 16bpp color definitions
+@@ -377,6 +414,15 @@ void lcd_show_board_info(void);
+ # define CONSOLE_COLOR_BLACK 0x0000
+ # define CONSOLE_COLOR_WHITE 0xffff /* Must remain last / highest */
+
++#elif LCD_BPP == LCD_COLOR32
++/*
++ * 18,24,32 bpp color definitions
++ */
++# define CONSOLE_COLOR_BLACK 0x00000000
++# define CONSOLE_COLOR_WHITE 0xffffffff /* Must remain last / highest */
++
++#else
++
+ #endif /* color definitions */
+
+ /************************************************************************/
+@@ -406,7 +452,7 @@ void lcd_show_board_info(void);
+ #if LCD_BPP == LCD_MONOCHROME
+ # define COLOR_MASK(c) ((c) | (c) << 1 | (c) << 2 | (c) << 3 | \
+ (c) << 4 | (c) << 5 | (c) << 6 | (c) << 7)
+-#elif (LCD_BPP == LCD_COLOR8) || (LCD_BPP == LCD_COLOR16)
++#elif (LCD_BPP == LCD_COLOR8) || (LCD_BPP == LCD_COLOR16) || (LCD_BPP == LCD_COLOR32)
+ # define COLOR_MASK(c) (c)
+ #else
+ # error Unsupported LCD BPP.
+--
+1.7.9.5
+
diff --git a/package/boot/uboot-xburst/patches/0006-enable-silent-console.patch b/package/boot/uboot-xburst/patches/0006-enable-silent-console.patch
new file mode 100644
index 0000000..ebd6a6a
--- /dev/null
+++ b/package/boot/uboot-xburst/patches/0006-enable-silent-console.patch
@@ -0,0 +1,60 @@
+From 5eb4d4c598f2806bd1b3d1140e917bfead7851ad Mon Sep 17 00:00:00 2001
+From: Xiangfu <xiangfu@openmobilefree.net>
+Date: Wed, 10 Oct 2012 23:51:26 +0800
+Subject: [PATCH 6/6] enable silent console
+
+---
+ common/console.c | 16 ++++++++++++++++
+ include/configs/qi_lb60.h | 2 ++
+ 2 files changed, 18 insertions(+)
+
+diff --git a/common/console.c b/common/console.c
+index 1177f7d..e8a2078 100644
+--- a/common/console.c
++++ b/common/console.c
+@@ -685,6 +685,14 @@ done:
+
+ gd->flags |= GD_FLG_DEVINIT; /* device initialization completed */
+
++#ifdef CONFIG_SILENT_CONSOLE
++ /* Check one more time the contents of the silent environment
++ * variable, because if the environment is loaded from NAND it was
++ * not available when console_init_f() was called */
++ if (getenv("silent") != NULL)
++ gd->flags |= GD_FLG_SILENT;
++#endif
++
+ stdio_print_current_devices();
+
+ #ifdef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
+@@ -760,6 +768,14 @@ int console_init_r(void)
+
+ gd->flags |= GD_FLG_DEVINIT; /* device initialization completed */
+
++#ifdef CONFIG_SILENT_CONSOLE
++ /* Check one more time the contents of the silent environment
++ * variable, because if the environment is loaded from NAND it was
++ * not available when console_init_f() was called */
++ if (getenv("silent") != NULL)
++ gd->flags |= GD_FLG_SILENT;
++#endif
++
+ stdio_print_current_devices();
+
+ /* Setting environment variables */
+diff --git a/include/configs/qi_lb60.h b/include/configs/qi_lb60.h
+index d3e78ad..a3534ff 100644
+--- a/include/configs/qi_lb60.h
++++ b/include/configs/qi_lb60.h
+@@ -102,6 +102,8 @@
+ #define CONFIG_SYS_NO_FLASH
+ #define CONFIG_SYS_FLASH_BASE 0 /* init flash_base as 0 */
+
++#define CONFIG_SILENT_CONSOLE 1 /* Enable silent console */
++
+ /*
+ * Command line configuration
+ */
+--
+1.7.9.5
+
diff --git a/package/boot/uboot-xburst/patches/001-xburst.patch b/package/boot/uboot-xburst/patches/001-xburst.patch
deleted file mode 100644
index be83330..0000000
--- a/package/boot/uboot-xburst/patches/001-xburst.patch
+++ /dev/null
@@ -1,1669 +0,0 @@
-this patch include the u-boot2009.11 change files
-
-From: Xiangfu Liu <xiangfu@sharism.cc>
-
-
----
-
- Makefile | 10 +
- common/env_common.c | 2
- common/lcd.c | 45 ++++
- common/main.c | 4
- cpu/mips/Makefile | 4
- cpu/mips/cache.S | 280 ++++++++++----------------
- cpu/mips/config.mk | 6 -
- cpu/mips/cpu.c | 75 +++++++
- cpu/mips/start.S | 432 ++++++++++++++++++++++++++++++++--------
- drivers/mtd/nand/nand_base.c | 88 ++++++++
- examples/standalone/mips.lds | 2
- include/asm-mips/addrspace.h | 2
- include/asm-mips/global_data.h | 11 +
- include/lcd.h | 56 +++++
- lib_mips/board.c | 18 +-
- lib_mips/bootm.c | 7 +
- lib_mips/time.c | 4
- 20 files changed, 800 insertions(+), 333 deletions(-)
-
-
-diff --git a/Makefile b/Makefile
-index f06a97c..a318eb4 100644
---- a/Makefile
-+++ b/Makefile
-@@ -3439,6 +3439,22 @@ qemu_mips_config : unconfig
- @$(MKCONFIG) -a qemu-mips mips mips qemu-mips
-
- #########################################################################
-+## MIPS32 Jz47XX
-+#########################################################################
-+qi_lb60_config : unconfig
-+ @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
-+ @echo "Compile NAND boot image for QI LB60"
-+ @$(MKCONFIG) -a qi_lb60 mips mips nanonote
-+ @echo "TEXT_BASE = 0x80100000" > $(obj)board/nanonote/config.tmp
-+ @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-+
-+avt2_config : unconfig
-+ @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
-+ @echo "Compile NAND boot image for AVT2"
-+ @$(MKCONFIG) -a avt2 mips mips nanonote
-+ @echo "TEXT_BASE = 0x80100000" > $(obj)board/nanonote/config.tmp
-+ @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-+#########################################################################
- ## MIPS64 5Kc
- #########################################################################
-
-diff --git a/common/env_common.c b/common/env_common.c
-index 439a4a9..6cfe30b 100644
---- a/common/env_common.c
-+++ b/common/env_common.c
-@@ -134,7 +134,10 @@ uchar default_environment[] = {
- "pcidelay=" MK_STR(CONFIG_PCI_BOOTDELAY) "\0"
- #endif
--#ifdef CONFIG_EXTRA_ENV_SETTINGS
-- CONFIG_EXTRA_ENV_SETTINGS
-+#ifdef CONFIG_BOOTARGSFROMSD
-+ "bootargsfromsd=" CONFIG_BOOTARGSFROMSD "\0"
-+#endif
-+#ifdef CONFIG_BOOTCOMMANDFROMSD
-+ "bootcmdfromsd=" CONFIG_BOOTCOMMANDFROMSD "\0"
- #endif
- "\0"
- };
-diff --git a/common/lcd.c b/common/lcd.c
-index 4e31618..ddd5aa8 100644
---- a/common/lcd.c
-+++ b/common/lcd.c
-@@ -64,7 +64,9 @@
- #ifdef CONFIG_LCD_LOGO
- # include <bmp_logo.h> /* Get logo data, width and height */
- # if (CONSOLE_COLOR_WHITE >= BMP_LOGO_OFFSET)
--# error Default Color Map overlaps with Logo Color Map
-+# ifndef CONFIG_JzRISC /* JzRISC core */
-+# error Default Color Map overlaps with Logo Color Map
-+# endif
- # endif
- #endif
-
-@@ -249,6 +251,14 @@ static void lcd_drawchars (ushort x, ushort y, uchar *str, int count)
- lcd_color_fg : lcd_color_bg;
- bits <<= 1;
- }
-+#elif LCD_BPP == LCD_COLOR32
-+ uint *m = (uint *)d;
-+ for (c=0; c<32; ++c) {
-+ *m++ = (bits & 0x80) ?
-+ lcd_color_fg : lcd_color_bg;
-+ //d+=4;
-+ bits <<= 1;
-+ }
- #endif
- }
- #if LCD_BPP == LCD_MONOCHROME
-@@ -315,6 +325,9 @@ static void test_pattern (void)
- }
- #endif /* LCD_TEST_PATTERN */
-
-+#ifdef CONFIG_JzRISC /* JzRISC core */
-+extern int flush_cache_all(void);
-+#endif
-
- /************************************************************************/
- /* ** GENERIC Initialization Routines */
-@@ -381,6 +394,7 @@ static int lcd_clear (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
- COLOR_MASK(lcd_getbgcolor()),
- lcd_line_length*panel_info.vl_row);
- #endif
-+
- /* Paint the logo and retrieve LCD base address */
- debug ("[LCD] Drawing the logo...\n");
- lcd_console_address = lcd_logo ();
-@@ -458,6 +472,8 @@ static void lcd_setfgcolor (int color)
- {
- #ifdef CONFIG_ATMEL_LCD
- lcd_color_fg = color;
-+#elif LCD_BPP == LCD_COLOR32
-+ lcd_color_fg = color & 0xFFFFFFFF;
- #else
- lcd_color_fg = color & 0x0F;
- #endif
-@@ -469,6 +485,8 @@ static void lcd_setbgcolor (int color)
- {
- #ifdef CONFIG_ATMEL_LCD
- lcd_color_bg = color;
-+#elif LCD_BPP == LCD_COLOR32
-+ lcd_color_bg = color & 0xFFFFFFFF;
- #else
- lcd_color_bg = color & 0x0F;
- #endif
-@@ -507,6 +525,7 @@ void bitmap_plot (int x, int y)
- uchar *bmap;
- uchar *fb;
- ushort *fb16;
-+ uint *fb32;
- #if defined(CONFIG_PXA250)
- struct pxafb_info *fbi = &panel_info.pxa;
- #elif defined(CONFIG_MPC823)
-@@ -567,13 +586,25 @@ void bitmap_plot (int x, int y)
- }
- }
- else { /* true color mode */
-- fb16 = (ushort *)(lcd_base + y * lcd_line_length + x);
-- for (i=0; i<BMP_LOGO_HEIGHT; ++i) {
-- for (j=0; j<BMP_LOGO_WIDTH; j++) {
-- fb16[j] = bmp_logo_palette[(bmap[j])];
-+ if(NBITS(panel_info.vl_bpix) == 16){
-+ fb16 = (ushort *)(lcd_base + y * lcd_line_length + x);
-+ for (i=0; i<BMP_LOGO_HEIGHT; ++i) {
-+ for (j=0; j<BMP_LOGO_WIDTH; j++) {
-+ fb16[j] = bmp_logo_palette[(bmap[j])];
- }
-- bmap += BMP_LOGO_WIDTH;
-- fb16 += panel_info.vl_col;
-+ bmap += BMP_LOGO_WIDTH;
-+ fb16 += panel_info.vl_col;
-+ }
-+ }
-+ else{
-+ fb32 = (uint *)(lcd_base + y * lcd_line_length + x);
-+ for (i=0; i<BMP_LOGO_HEIGHT; ++i) {
-+ for (j=0; j<BMP_LOGO_WIDTH; j++) {
-+ fb32[j] = bmp_logo_palette[(bmap[j])];
-+ }
-+ bmap += BMP_LOGO_WIDTH;
-+ fb32 += panel_info.vl_col;
-+ }
- }
- }
-
-diff --git a/common/main.c b/common/main.c
-index 10d8904..ff11ad7 100644
---- a/common/main.c
-+++ b/common/main.c
-@@ -372,7 +372,9 @@ void main_loop (void)
- #if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0)
- s = getenv ("bootdelay");
- bootdelay = s ? (int)simple_strtol(s, NULL, 10) : CONFIG_BOOTDELAY;
--
-+ DECLARE_GLOBAL_DATA_PTR;
-+ if (gd->boot_option == 5)
-+ bootdelay = gd->boot_option;
- debug ("### main_loop entered: bootdelay=%d\n\n", bootdelay);
-
- # ifdef CONFIG_BOOT_RETRY_TIME
-@@ -393,7 +395,9 @@ void main_loop (void)
- }
- else
- #endif /* CONFIG_BOOTCOUNT_LIMIT */
-- s = getenv ("bootcmd");
-+ s = gd->boot_option == 1 ?
-+ getenv ("bootcmdfromsd"):
-+ getenv ("bootcmd") ;
-
- debug ("### main_loop: bootcmd=\"%s\"\n", s ? s : "<UNDEFINED>");
-
-diff --git a/cpu/mips/Makefile b/cpu/mips/Makefile
-index 28a1cbb..5207bc5 100644
---- a/cpu/mips/Makefile
-+++ b/cpu/mips/Makefile
-@@ -33,6 +33,9 @@ SOBJS-$(CONFIG_INCA_IP) += incaip_wdt.o
- COBJS-$(CONFIG_INCA_IP) += asc_serial.o incaip_clock.o
- COBJS-$(CONFIG_PURPLE) += asc_serial.o
- COBJS-$(CONFIG_SOC_AU1X00) += au1x00_eth.o au1x00_serial.o au1x00_usb_ohci.o
-+COBJS-$(CONFIG_JZSOC) += jz4740.o jz_serial.o jz_mmc.o jz4740_nand.o
-+COBJS-$(CONFIG_NANONOTE) += nanonote_gpm940b0.o
-+
-
- SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
- OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-diff --git a/cpu/mips/cache.S b/cpu/mips/cache.S
-index ff4f11c..cb3baff 100644
---- a/cpu/mips/cache.S
-+++ b/cpu/mips/cache.S
-@@ -23,32 +23,19 @@
- */
-
- #include <config.h>
--#include <asm/asm.h>
-+#include <version.h>
- #include <asm/regdef.h>
- #include <asm/mipsregs.h>
- #include <asm/addrspace.h>
- #include <asm/cacheops.h>
-
--#define RA t8
-+#ifndef CONFIG_JzRISC
-
--/*
-- * 16kB is the maximum size of instruction and data caches on MIPS 4K,
-- * 64kB is on 4KE, 24K, 5K, etc. Set bigger size for convenience.
-- *
-- * Note that the above size is the maximum size of primary cache. U-Boot
-- * doesn't have L2 cache support for now.
-- */
--#define MIPS_MAX_CACHE_SIZE 0x10000
--
--#define INDEX_BASE CKSEG0
-+ /* 16KB is the maximum size of instruction and data caches on
-+ * MIPS 4K.
-+ */
-+#define MIPS_MAX_CACHE_SIZE 0x4000
-
-- .macro cache_op op addr
-- .set push
-- .set noreorder
-- .set mips3
-- cache \op, 0(\addr)
-- .set pop
-- .endm
-
- /*
- * cacheop macro to automate cache operations
-@@ -119,79 +106,7 @@
- #define icacheop(kva, n, cacheSize, cacheLineSize, op) \
- icacheopn(kva, n, cacheSize, cacheLineSize, 1, (op))
-
-- .macro f_fill64 dst, offset, val
-- LONG_S \val, (\offset + 0 * LONGSIZE)(\dst)
-- LONG_S \val, (\offset + 1 * LONGSIZE)(\dst)
-- LONG_S \val, (\offset + 2 * LONGSIZE)(\dst)
-- LONG_S \val, (\offset + 3 * LONGSIZE)(\dst)
-- LONG_S \val, (\offset + 4 * LONGSIZE)(\dst)
-- LONG_S \val, (\offset + 5 * LONGSIZE)(\dst)
-- LONG_S \val, (\offset + 6 * LONGSIZE)(\dst)
-- LONG_S \val, (\offset + 7 * LONGSIZE)(\dst)
--#if LONGSIZE == 4
-- LONG_S \val, (\offset + 8 * LONGSIZE)(\dst)
-- LONG_S \val, (\offset + 9 * LONGSIZE)(\dst)
-- LONG_S \val, (\offset + 10 * LONGSIZE)(\dst)
-- LONG_S \val, (\offset + 11 * LONGSIZE)(\dst)
-- LONG_S \val, (\offset + 12 * LONGSIZE)(\dst)
-- LONG_S \val, (\offset + 13 * LONGSIZE)(\dst)
-- LONG_S \val, (\offset + 14 * LONGSIZE)(\dst)
-- LONG_S \val, (\offset + 15 * LONGSIZE)(\dst)
--#endif
-- .endm
--
--/*
-- * mips_init_icache(uint PRId, ulong icache_size, unchar icache_linesz)
-- */
--LEAF(mips_init_icache)
-- blez a1, 9f
-- mtc0 zero, CP0_TAGLO
-- /* clear tag to invalidate */
-- PTR_LI t0, INDEX_BASE
-- PTR_ADDU t1, t0, a1
--1: cache_op Index_Store_Tag_I t0
-- PTR_ADDU t0, a2
-- bne t0, t1, 1b
-- /* fill once, so data field parity is correct */
-- PTR_LI t0, INDEX_BASE
--2: cache_op Fill t0
-- PTR_ADDU t0, a2
-- bne t0, t1, 2b
-- /* invalidate again - prudent but not strictly neccessary */
-- PTR_LI t0, INDEX_BASE
--1: cache_op Index_Store_Tag_I t0
-- PTR_ADDU t0, a2
-- bne t0, t1, 1b
--9: jr ra
-- END(mips_init_icache)
--
- /*
-- * mips_init_dcache(uint PRId, ulong dcache_size, unchar dcache_linesz)
-- */
--LEAF(mips_init_dcache)
-- blez a1, 9f
-- mtc0 zero, CP0_TAGLO
-- /* clear all tags */
-- PTR_LI t0, INDEX_BASE
-- PTR_ADDU t1, t0, a1
--1: cache_op Index_Store_Tag_D t0
-- PTR_ADDU t0, a2
-- bne t0, t1, 1b
-- /* load from each line (in cached space) */
-- PTR_LI t0, INDEX_BASE
--2: LONG_L zero, 0(t0)
-- PTR_ADDU t0, a2
-- bne t0, t1, 2b
-- /* clear all tags */
-- PTR_LI t0, INDEX_BASE
--1: cache_op Index_Store_Tag_D t0
-- PTR_ADDU t0, a2
-- bne t0, t1, 1b
--9: jr ra
-- END(mips_init_dcache)
--
--/*******************************************************************************
--*
- * mips_cache_reset - low level initialisation of the primary caches
- *
- * This routine initialises the primary caches to ensure that they
-@@ -204,112 +119,129 @@ LEAF(mips_init_dcache)
- * a source of parity.
- *
- * RETURNS: N/A
--*
- */
--NESTED(mips_cache_reset, 0, ra)
-- move RA, ra
-+ .globl mips_cache_reset
-+ .ent mips_cache_reset
-+mips_cache_reset:
-+
- li t2, CONFIG_SYS_ICACHE_SIZE
- li t3, CONFIG_SYS_DCACHE_SIZE
- li t4, CONFIG_SYS_CACHELINE_SIZE
- move t5, t4
-
-+
- li v0, MIPS_MAX_CACHE_SIZE
-
-- /*
-- * Now clear that much memory starting from zero.
-+ /* Now clear that much memory starting from zero.
- */
-- PTR_LI a0, CKSEG1
-- PTR_ADDU a1, a0, v0
--2: PTR_ADDIU a0, 64
-- f_fill64 a0, -64, zero
-- bne a0, a1, 2b
--
-- /*
-- * The caches are probably in an indeterminate state,
-- * so we force good parity into them by doing an
-- * invalidate, load/fill, invalidate for each line.
-+
-+ li a0, KSEG1
-+ addu a1, a0, v0
-+
-+2: sw zero, 0(a0)
-+ sw zero, 4(a0)
-+ sw zero, 8(a0)
-+ sw zero, 12(a0)
-+ sw zero, 16(a0)
-+ sw zero, 20(a0)
-+ sw zero, 24(a0)
-+ sw zero, 28(a0)
-+ addu a0, 32
-+ bltu a0, a1, 2b
-+
-+ /* Set invalid tag.
- */
-
-- /*
-- * Assume bottom of RAM will generate good parity for the cache.
-+ mtc0 zero, CP0_TAGLO
-+
-+ /*
-+ * The caches are probably in an indeterminate state,
-+ * so we force good parity into them by doing an
-+ * invalidate, load/fill, invalidate for each line.
-+ */
-+
-+ /* Assume bottom of RAM will generate good parity for the cache.
- */
-
-- /*
-- * Initialize the I-cache first,
-+ li a0, K0BASE
-+ move a2, t2 # icacheSize
-+ move a3, t4 # icacheLineSize
-+ move a1, a2
-+ icacheopn(a0,a1,a2,a3,121,(Index_Store_Tag_I,Fill))
-+
-+ /* To support Orion/R4600, we initialise the data cache in 3 passes.
- */
-- move a1, t2
-- move a2, t4
-- PTR_LA t7, mips_init_icache
-- jalr t7
-
-- /*
-- * then initialize D-cache.
-+ /* 1: initialise dcache tags.
- */
-- move a1, t3
-- move a2, t5
-- PTR_LA t7, mips_init_dcache
-- jalr t7
-
-- jr RA
-- END(mips_cache_reset)
-+ li a0, K0BASE
-+ move a2, t3 # dcacheSize
-+ move a3, t5 # dcacheLineSize
-+ move a1, a2
-+ icacheop(a0,a1,a2,a3,Index_Store_Tag_D)
-
--/*******************************************************************************
--*
--* dcache_status - get cache status
--*
--* RETURNS: 0 - cache disabled; 1 - cache enabled
--*
--*/
--LEAF(dcache_status)
-- mfc0 t0, CP0_CONFIG
-- li t1, CONF_CM_UNCACHED
-- andi t0, t0, CONF_CM_CMASK
-- move v0, zero
-- beq t0, t1, 2f
-- li v0, 1
--2: jr ra
-- END(dcache_status)
--
--/*******************************************************************************
--*
-+ /* 2: fill dcache.
-+ */
-+
-+ li a0, K0BASE
-+ move a2, t3 # dcacheSize
-+ move a3, t5 # dcacheLineSize
-+ move a1, a2
-+ icacheopn(a0,a1,a2,a3,1lw,(dummy))
-+
-+ /* 3: clear dcache tags.
-+ */
-+
-+ li a0, K0BASE
-+ move a2, t3 # dcacheSize
-+ move a3, t5 # dcacheLineSize
-+ move a1, a2
-+ icacheop(a0,a1,a2,a3,Index_Store_Tag_D)
-+
-+ j ra
-+ .end mips_cache_reset
-+
-+
-+/*
-+ * dcache_status - get cache status
-+ *
-+ * RETURNS: 0 - cache disabled; 1 - cache enabled
-+ */
-+ .globl dcache_status
-+ .ent dcache_status
-+dcache_status:
-+
-+ mfc0 v0, CP0_CONFIG
-+ andi v0, v0, 1
-+ j ra
-+
-+ .end dcache_status
-+
-+/*
- * dcache_disable - disable cache
- *
- * RETURNS: N/A
--*
- */
--LEAF(dcache_disable)
-+ .globl dcache_disable
-+ .ent dcache_disable
-+dcache_disable:
-+
- mfc0 t0, CP0_CONFIG
- li t1, -8
- and t0, t0, t1
- ori t0, t0, CONF_CM_UNCACHED
-- mtc0 t0, CP0_CONFIG
-- jr ra
-- END(dcache_disable)
-+ mtc0 t0, CP0_CONFIG
-+ j ra
-
--/*******************************************************************************
--*
--* dcache_enable - enable cache
--*
--* RETURNS: N/A
--*
--*/
--LEAF(dcache_enable)
-- mfc0 t0, CP0_CONFIG
-- ori t0, CONF_CM_CMASK
-- xori t0, CONF_CM_CMASK
-- ori t0, CONF_CM_CACHABLE_NONCOHERENT
-- mtc0 t0, CP0_CONFIG
-- jr ra
-- END(dcache_enable)
--
--#ifdef CONFIG_SYS_INIT_RAM_LOCK_MIPS
--/*******************************************************************************
--*
--* mips_cache_lock - lock RAM area pointed to by a0 in cache.
--*
--* RETURNS: N/A
--*
--*/
-+ .end dcache_disable
-+
-+
-+/*
-+ * mips_cache_lock - lock RAM area pointed to by a0 in cache.
-+ *
-+ * RETURNS: N/A
-+ */
- #if defined(CONFIG_PURPLE)
- # define CACHE_LOCK_SIZE (CONFIG_SYS_DCACHE_SIZE/2)
- #else
-@@ -318,14 +250,14 @@ LEAF(dcache_enable)
- .globl mips_cache_lock
- .ent mips_cache_lock
- mips_cache_lock:
-- li a1, CKSEG0 - CACHE_LOCK_SIZE
-+ li a1, K0BASE - CACHE_LOCK_SIZE
- addu a0, a1
- li a2, CACHE_LOCK_SIZE
- li a3, CONFIG_SYS_CACHELINE_SIZE
- move a1, a2
- icacheop(a0,a1,a2,a3,0x1d)
-
-- jr ra
--
-+ j ra
- .end mips_cache_lock
--#endif /* CONFIG_SYS_INIT_RAM_LOCK_MIPS */
-+
-+#endif /* CONFIG_JzRISC */
-diff --git a/cpu/mips/config.mk b/cpu/mips/config.mk
-index a173c54..8d27e52 100644
---- a/cpu/mips/config.mk
-+++ b/cpu/mips/config.mk
-@@ -25,15 +25,15 @@ MIPSFLAGS:=$(shell \
- if [ "$v" -lt "14" ]; then \
- echo "-mcpu=4kc"; \
- else \
-- echo "-march=4kc -mtune=4kc"; \
-+ echo "-march=4kc -mtune=r4600"; \
- fi)
-
- ifneq (,$(findstring 4KCle,$(CROSS_COMPILE)))
- ENDIANNESS = -EL
- else
--ENDIANNESS = -EB
-+#ENDIANNESS = -EB
- endif
-
--MIPSFLAGS += $(ENDIANNESS)
-+MIPSFLAGS += $(ENDIANNESS) -mabicalls -mips32 -O2
-
- PLATFORM_CPPFLAGS += $(MIPSFLAGS)
-diff --git a/cpu/mips/cpu.c b/cpu/mips/cpu.c
-index d5a1604..48e1cea 100644
---- a/cpu/mips/cpu.c
-+++ b/cpu/mips/cpu.c
-@@ -28,6 +28,12 @@
- #include <asm/cacheops.h>
- #include <asm/reboot.h>
-
-+#ifdef CONFIG_JZ4740
-+#include <asm/jz4740.h>
-+#endif
-+
-+#if !defined (CONFIG_NAND_SPL) && !defined (CONFIG_MSC_SPL)
-+
- #define cache_op(op,addr) \
- __asm__ __volatile__( \
- " .set push \n" \
-@@ -40,6 +46,19 @@
-
- void __attribute__((weak)) _machine_restart(void)
- {
-+#ifdef CONFIG_JZ4740
-+ __wdt_select_extalclk();
-+ __wdt_select_clk_div64();
-+ __wdt_set_data(100);
-+ __wdt_set_count(0);
-+ __tcu_start_wdt_clock();
-+ __wdt_start();
-+ while(1);
-+#endif
-+#if defined(CONFIG_JzRISC)
-+ void (*f)(void) = (void *) 0xbfc00000;
-+ f();
-+#endif
- }
-
- int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-@@ -110,3 +129,59 @@ int cpu_eth_init(bd_t *bis)
- #endif
- return 0;
- }
-+
-+#endif /* !CONFIG_NAND_SPL !CONFIG_MSC_SPL */
-+
-+#ifdef CONFIG_JzRISC
-+void flush_icache_all(void)
-+{
-+ u32 addr, t = 0;
-+
-+ asm volatile ("mtc0 $0, $28"); /* Clear Taglo */
-+ asm volatile ("mtc0 $0, $29"); /* Clear TagHi */
-+
-+ for (addr = KSEG0; addr < KSEG0 + CONFIG_SYS_ICACHE_SIZE;
-+ addr += CONFIG_SYS_CACHELINE_SIZE) {
-+ asm volatile (
-+ ".set mips3\n\t"
-+ " cache %0, 0(%1)\n\t"
-+ ".set mips2\n\t"
-+ :
-+ : "I" (Index_Store_Tag_I), "r"(addr));
-+ }
-+
-+ /* invalicate btb */
-+ asm volatile (
-+ ".set mips32\n\t"
-+ "mfc0 %0, $16, 7\n\t"
-+ "nop\n\t"
-+ "ori %0,2\n\t"
-+ "mtc0 %0, $16, 7\n\t"
-+ ".set mips2\n\t"
-+ :
-+ : "r" (t));
-+}
-+
-+void flush_dcache_all(void)
-+{
-+ u32 addr;
-+
-+ for (addr = KSEG0; addr < KSEG0 + CONFIG_SYS_DCACHE_SIZE;
-+ addr += CONFIG_SYS_CACHELINE_SIZE) {
-+ asm volatile (
-+ ".set mips3\n\t"
-+ " cache %0, 0(%1)\n\t"
-+ ".set mips2\n\t"
-+ :
-+ : "I" (Index_Writeback_Inv_D), "r"(addr));
-+ }
-+
-+ asm volatile ("sync");
-+}
-+
-+void flush_cache_all(void)
-+{
-+ flush_dcache_all();
-+ flush_icache_all();
-+}
-+#endif /* CONFIG_JzRISC */
-diff --git a/cpu/mips/start.S b/cpu/mips/start.S
-index 57db589..fa6e352 100644
---- a/cpu/mips/start.S
-+++ b/cpu/mips/start.S
-@@ -23,32 +23,33 @@
- */
-
- #include <config.h>
-+#include <version.h>
- #include <asm/regdef.h>
- #include <asm/mipsregs.h>
-+#include <asm/addrspace.h>
-+#include <asm/cacheops.h>
-
-- /*
-- * For the moment disable interrupts, mark the kernel mode and
-- * set ST0_KX so that the CPU does not spit fire when using
-- * 64-bit addresses.
-- */
-- .macro setup_c0_status set clr
-- .set push
-- mfc0 t0, CP0_STATUS
-- or t0, ST0_CU0 | \set | 0x1f | \clr
-- xor t0, 0x1f | \clr
-- mtc0 t0, CP0_STATUS
-- .set noreorder
-- sll zero, 3 # ehb
-- .set pop
-- .endm
--
-- .macro setup_c0_status_reset
--#ifdef CONFIG_64BIT
-- setup_c0_status ST0_KX 0
--#else
-- setup_c0_status 0 0
-+#ifdef CONFIG_JZ4730
-+#include <asm/jz4730.h>
-+#endif
-+
-+#ifdef CONFIG_JZ4740
-+#include <asm/jz4740.h>
-+#endif
-+
-+#ifdef CONFIG_JZ4750
-+#include <asm/jz4750.h>
-+#endif
-+
-+#ifdef CONFIG_JZ4750D
-+#include <asm/jz4750d.h>
-+#endif
-+
-+#if defined(CONFIG_JZ4750) || defined(CONFIG_JZ4750D)
-+#define JZ4750_NANDBOOT_CFG0 (0x55555500 | (CFG_NAND_BW8*0xff))
-+#define JZ4750_NANDBOOT_CFG1 0x55555555
-+#define JZ4750_NANDBOOT_CFG2 ((CFG_NAND_PAGE_SIZE==2048)&0xff0000) | ((CFG_NAND_PAGE_SIZE!=512)&0xff00) | ((CFG_NAND_ROW_CYCLE==3)&0xff)
- #endif
-- .endm
-
- #define RVECENT(f,n) \
- b f; nop
-@@ -61,6 +62,28 @@
- .globl _start
- .text
- _start:
-+#if defined(CONFIG_JZ4740)
-+#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_NAND_U_BOOT)
-+ .word JZ4740_NORBOOT_CFG /* fetched during NOR Boot */
-+#else
-+#if defined(CONFIG_NAND_SPL)
-+ .word JZ4740_NANDBOOT_CFG /* fetched during NAND Boot */
-+#endif
-+#endif
-+#endif /* CONFIG_JZ4740 */
-+#if defined(CONFIG_JZ4750) || defined(CONFIG_JZ4750D)
-+#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_NAND_U_BOOT)
-+ .word JZ4750_NORBOOT_CFG /* fetched during NOR Boot */
-+#else
-+#if defined(CONFIG_NAND_SPL) && !defined(CONFIG_MSC_SPL)
-+ /* First three words fetched by CPU during NAND Boot */
-+ .word JZ4750_NANDBOOT_CFG0
-+ .word JZ4750_NANDBOOT_CFG1
-+ .word JZ4750_NANDBOOT_CFG2
-+#endif
-+#endif
-+#endif /* CONFIG_JZ4750 || CONFIG_JZ4750D */
-+#if !defined(CONFIG_JzRISC)
- RVECENT(reset,0) /* U-boot entry point */
- RVECENT(reset,1) /* software reboot */
- #if defined(CONFIG_INCA_IP)
-@@ -213,7 +236,7 @@ _start:
- .word 0x00000000
- .word 0x03e00008
- .word 0x00000000
-- .word 0x00000000
-+ .word 0x00000000
- /* 0xbfc00428 */
- .word 0xdc870000
- .word 0xfca70000
-@@ -224,74 +247,192 @@ _start:
- .word 0x00000000
- .word 0x03e00008
- .word 0x00000000
-- .word 0x00000000
-+ .word 0x00000000
- #endif /* CONFIG_PURPLE */
- .align 4
-+#endif /* CONFIG_JzRISC */
-+
- reset:
-
-+#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
-+
-+#ifdef CONFIG_JZ4730
-+
-+ /* Disable interrupts */
-+ la t0, INTC_IMR
-+ li t1, 0xffffffff
-+ sw t1, 0(t0)
-+
-+ /*
-+ * Clear SCR.HGP
-+ */
-+ la t0, CPM_SCR
-+ lw t1, 0(t0)
-+ ori t1, 0x8
-+ xori t1, 0x8
-+ sw t1, 0(t0)
-+
-+ /*
-+ * Set usb port0 as host
-+ */
-+ la t0, HARB_HAPOR
-+ lw t1, 0(t0)
-+ ori t1, HARB_HAPOR_UCHSEL
-+ sw t1, 0(t0)
-+
-+ /*
-+ * Check reset status
-+ */
-+ la t0, CPM_RSTR
-+ lw t1, 0(t0)
-+ andi t1, 0x4
-+ bnez t1, resume_from_hibernate
-+ nop
-+#endif /* CONFIG_JZ4730 */
-+
-+#ifndef CONFIG_NAND_SPL
- /* Clear watch registers.
- */
- mtc0 zero, CP0_WATCHLO
- mtc0 zero, CP0_WATCHHI
-+#endif
-
-- /* WP(Watch Pending), SW0/1 should be cleared. */
-- mtc0 zero, CP0_CAUSE
-+ /* STATUS register */
-+#ifdef CONFIG_JzRISC
-+ /*
-+ * CU0=UM=EXL=IE=0, BEV=ERL=1, IP2~7=1
-+ */
-+ li t0, 0x0040FC04
-+ mtc0 t0, CP0_STATUS
-+#else
-+#ifdef CONFIG_TB0229
-+ li k0, ST0_CU0
-+#else
-+ mfc0 k0, CP0_STATUS
-+#endif
-+ li k1, ~ST0_IE
-+ and k0, k1
-+ mtc0 k0, CP0_STATUS
-+#endif
-
-- setup_c0_status_reset
-+ /* CAUSE register */
-+#ifdef CONFIG_JzRISC
-+ /* IV=1, use the specical interrupt vector (0x200) */
-+ li t1, 0x00800000
-+ mtc0 t1, CP0_CAUSE
-+#else
-+ mtc0 zero, CP0_CAUSE
-+#endif
-
-+#ifndef CONFIG_JzRISC
- /* Init Timer */
- mtc0 zero, CP0_COUNT
- mtc0 zero, CP0_COMPARE
-+#endif
-
--#if !defined(CONFIG_SKIP_LOWLEVEL_INIT)
-+#endif /* !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
-+
-+#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_NAND_U_BOOT)
- /* CONFIG0 register */
- li t0, CONF_CM_UNCACHED
- mtc0 t0, CP0_CONFIG
--#endif /* !CONFIG_SKIP_LOWLEVEL_INIT */
-+#endif
-
-- /* Initialize $gp.
-+ /* Initialize GOT pointer.
-+ */
-+ bal 1f
-+ nop
-+ .word _GLOBAL_OFFSET_TABLE_
-+ 1:
-+ move gp, ra
-+ lw t1, 0(ra)
-+ move gp, t1
-+
-+#ifdef CONFIG_INCA_IP
-+ /* Disable INCA-IP Watchdog.
- */
-- bal 1f
-+ la t9, disable_incaip_wdt
-+ jalr t9
- nop
-- .word _gp
--1:
-- lw gp, 0(ra)
-+#endif
-
--#if !defined(CONFIG_SKIP_LOWLEVEL_INIT)
-+/* JzRISC will init external memory in board_init_f,
-+ which uses cache as stack and calls into C code. */
-+#ifndef CONFIG_JzRISC
- /* Initialize any external memory.
- */
-- la t9, lowlevel_init
-- jalr t9
-+ la t9, lowlevel_init
-+ jalr t9
- nop
-+#endif
-
-+#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_NAND_U_BOOT)
- /* Initialize caches...
- */
-- la t9, mips_cache_reset
-- jalr t9
-+#ifdef CONFIG_JzRISC
-+ .set mips32
-+ mtc0 zero, CP0_TAGLO
-+ mtc0 zero, CP0_TAGHI
-+
-+ li t0, K0BASE
-+ ori t1, t0, CONFIG_SYS_DCACHE_SIZE
-+1:
-+ cache Index_Store_Tag_D, 0(t0)
-+ bne t0, t1, 1b
-+ addiu t0, t0, CONFIG_SYS_CACHELINE_SIZE
-+
-+ li t0, K0BASE
-+ ori t1, t0, CONFIG_SYS_ICACHE_SIZE
-+2:
-+ cache Index_Store_Tag_I, 0(t0)
-+ bne t0, t1, 2b
-+ addiu t0, t0, CONFIG_SYS_CACHELINE_SIZE
-+
-+ /* Invalidate BTB */
-+ mfc0 t0, CP0_CONFIG, 7
-+ nop
-+ ori t0, 2
-+ mtc0 t0, CP0_CONFIG, 7
- nop
-
-+ .set mips2
-+#else
-+ la t9, mips_cache_reset
-+ jalr t9
-+ nop
-+#endif
-+
- /* ... and enable them.
- */
- li t0, CONF_CM_CACHABLE_NONCOHERENT
- mtc0 t0, CP0_CONFIG
--#endif /* !CONFIG_SKIP_LOWLEVEL_INIT */
-+ nop
-+
-+#endif /* !defined(CONFIG_NAND_SPL) && !defined(CONFIG_NAND_U_BOOT) */
-
- /* Set up temporary stack.
- */
--#ifdef CONFIG_SYS_INIT_RAM_LOCK_MIPS
-+#ifndef CONFIG_JzRISC
- li a0, CONFIG_SYS_INIT_SP_OFFSET
-- la t9, mips_cache_lock
-- jalr t9
-+ la t9, mips_cache_lock
-+ jalr t9
- nop
- #endif
-
-+#ifdef CONFIG_NAND_SPL
-+ la sp, 0x80004000
-+ la t9, nand_boot
-+ j t9
-+ nop
-+#else
- li t0, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET
- la sp, 0(t0)
-
- la t9, board_init_f
-- jr t9
-+ j t9
- nop
-
-+
- /*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
-@@ -305,37 +446,28 @@ reset:
- .globl relocate_code
- .ent relocate_code
- relocate_code:
-- move sp, a0 /* Set new stack pointer */
-+ move sp, a0 /* Set new stack pointer */
-
-- li t0, CONFIG_SYS_MONITOR_BASE
-+ li t0, TEXT_BASE
- la t3, in_ram
- lw t2, -12(t3) /* t2 <-- uboot_end_data */
- move t1, a2
-- move s2, a2 /* s2 <-- destination address */
-
- /*
-- * Fix $gp:
-+ * Fix GOT pointer:
- *
-- * New $gp = (Old $gp - CONFIG_SYS_MONITOR_BASE) + Destination Address
-+ * New GOT-PTR = (old GOT-PTR - TEXT_BASE) + Destination Address
- */
- move t6, gp
-- sub gp, CONFIG_SYS_MONITOR_BASE
-- add gp, a2 /* gp now adjusted */
-- sub s1, gp, t6 /* s1 <-- relocation offset */
-+ sub gp, TEXT_BASE
-+ add gp, a2 /* gp now adjusted */
-+ sub t6, gp, t6 /* t6 <-- relocation offset */
-
- /*
- * t0 = source address
- * t1 = target address
- * t2 = source end address
- */
--
-- /*
-- * Save destination address and size for later usage in flush_cache()
-- */
-- move s0, a1 /* save gd in s0 */
-- move a0, t1 /* a0 <-- destination addr */
-- sub a1, t2, t0 /* a1 <-- size */
--
- /* On the purple board we copy the code earlier in a special way
- * in order to solve flash problems
- */
-@@ -345,47 +477,61 @@ relocate_code:
- sw t3, 0(t1)
- addu t0, 4
- ble t0, t2, 1b
-- addu t1, 4 /* delay slot */
-+ addu t1, 4 /* delay slot */
- #endif
-
- /* If caches were enabled, we would have to flush them here.
- */
--
-- /* a0 & a1 are already set up for flush_cache(start, size) */
-- la t9, flush_cache
-- jalr t9
-+#ifdef CONFIG_JzRISC
-+ /* flush d-cache */
-+ .set mips32
-+ li t0, KSEG0
-+ addi t1, t0, CONFIG_SYS_DCACHE_SIZE
-+2:
-+ cache Index_Writeback_Inv_D, 0(t0)
-+ bne t0, t1, 2b
-+ addi t0, CONFIG_SYS_CACHELINE_SIZE
-+
-+ sync
-+
-+ /* flush i-cache */
-+ li t0, KSEG0
-+ addi t1, t0, CONFIG_SYS_ICACHE_SIZE
-+3:
-+ cache Index_Invalidate_I, 0(t0)
-+ bne t0, t1, 3b
-+ addi t0, CONFIG_SYS_CACHELINE_SIZE
-+
-+ /* Invalidate BTB */
-+ mfc0 t0, CP0_CONFIG, 7
-+ nop
-+ ori t0, 2
-+ mtc0 t0, CP0_CONFIG, 7
- nop
-
-+ .set mips0
-+#endif
-+
- /* Jump to where we've relocated ourselves.
- */
-- addi t0, s2, in_ram - _start
-- jr t0
-+ addi t0, a2, in_ram - _start
-+ j t0
- nop
-
-- .word _gp
-- .word _GLOBAL_OFFSET_TABLE_
- .word uboot_end_data
- .word uboot_end
- .word num_got_entries
-
- in_ram:
-- /*
-- * Now we want to update GOT.
-- *
-- * GOT[0] is reserved. GOT[1] is also reserved for the dynamic object
-- * generated by GNU ld. Skip these reserved entries from relocation.
-+ /* Now we want to update GOT.
- */
- lw t3, -4(t0) /* t3 <-- num_got_entries */
-- lw t4, -16(t0) /* t4 <-- _GLOBAL_OFFSET_TABLE_ */
-- lw t5, -20(t0) /* t5 <-- _gp */
-- sub t4, t5 /* compute offset*/
-- add t4, t4, gp /* t4 now holds relocated _GLOBAL_OFFSET_TABLE_ */
-- addi t4, t4, 8 /* Skipping first two entries. */
-+ addi t4, gp, 8 /* Skipping first two entries. */
- li t2, 2
- 1:
- lw t1, 0(t4)
- beqz t1, 2f
-- add t1, s1
-+ add t1, t6
- sw t1, 0(t4)
- 2:
- addi t2, 1
-@@ -396,26 +542,134 @@ in_ram:
- */
- lw t1, -12(t0) /* t1 <-- uboot_end_data */
- lw t2, -8(t0) /* t2 <-- uboot_end */
-- add t1, s1 /* adjust pointers */
-- add t2, s1
-+ add t1, t6 /* adjust pointers */
-+ add t2, t6
-
- sub t1, 4
--1:
-- addi t1, 4
-+1: addi t1, 4
- bltl t1, t2, 1b
- sw zero, 0(t1) /* delay slot */
-
-- move a0, s0 /* a0 <-- gd */
-+ move a0, a1
- la t9, board_init_r
-- jr t9
-- move a1, s2 /* delay slot */
-+ j t9
-+ move a1, a2 /* delay slot */
-
- .end relocate_code
-
-+#endif /* CONFIG_NAND_SPL */
-+
-+#if !defined(CONFIG_JzRISC)
- /* Exception handlers.
- */
- romReserved:
-- b romReserved
-+ b romReserved
-
- romExcHandle:
-- b romExcHandle
-+ b romExcHandle
-+#endif
-+
-+#ifdef CONFIG_JZ4730
-+
-+/* These are the runtime values, modify them according to your platform. */
-+#define PLCR1_VAL 0x1b000520
-+#define CFCR_VAL 0x0c526220
-+
-+#define DMCR_VAL0 0x042a3211
-+#define DMCR_VAL1 0x05aa3211 /*(DMCR_VAL0|EMC_DMCR_RFSH|EMC_DMCR_MRSET)*/
-+
-+#define RTCOR_VAL 0x10
-+#define RTCSR_VAL 0x83
-+
-+ /*
-+ * cpu was reset from hibernate mode
-+ */
-+resume_from_hibernate:
-+ /*
-+ * Init PLL
-+ */
-+ la t0, 0xB0000000 /* CFCR */
-+ li t1, CFCR_VAL
-+ sw t1, 0(t0)
-+
-+ la t0, 0xB0000010 /* PLCR1 */
-+ li t1, PLCR1_VAL
-+ sw t1, 0(t0)
-+ nop;nop;nop;nop
-+
-+ /* Init caches */
-+ .set mips32
-+ mtc0 zero, CP0_TAGLO
-+ mtc0 zero, CP0_TAGHI
-+
-+ li t0, K0BASE
-+ ori t1, t0, CONFIG_SYS_DCACHE_SIZE
-+1:
-+ cache Index_Store_Tag_D, 0(t0)
-+ cache Index_Store_Tag_I, 0(t0)
-+ bne t0, t1, 1b
-+ addiu t0, t0, CONFIG_SYS_CACHELINE_SIZE
-+
-+ /*
-+ * Init SDRAM
-+ */
-+ la t0, 0xB0010070 /* GPALR2 */
-+ lw t1, 0(t0)
-+ li t2, 0x3FFFFFFF
-+ and t1, t2
-+ li t2, 0x40000000
-+ or t1, t2
-+ sw t1, 0(t0)
-+
-+ la t0, 0xB0010074 /* GPAUR2 */
-+ lw t1, 0(t0)
-+ li t2, 0xFFFF0000
-+ and t1, t2
-+ li t2, 0x00005555
-+ or t1, t2
-+ sw t1, 0(t0)
-+
-+ la t0, 0xB3010000 /* EMC base address */
-+
-+ li t1, DMCR_VAL0 /* DMCR */
-+ sw t1, 0x80(t0)
-+
-+ li t1, RTCOR_VAL
-+ sh t1, 0x8c(t0) /* RTCOR */
-+
-+ li t1, RTCSR_VAL
-+ sh t1, 0x84(t0) /* RTCSR */
-+
-+ /* precharge all chip-selects */
-+ ori t1, t0, 0xa088
-+ sb $0, 0(t1)
-+ ori t1, t0, 0xb088
-+ sb $0, 0(t1)
-+
-+ /* delay about 200us */
-+ li t1, 0x20000
-+1:
-+ bnez t1, 1b
-+ sub t1, 1
-+
-+ la t1, DMCR_VAL1 /* DMCR */
-+ sw t1, 0x80(t0)
-+
-+ /* write sdram mode register for each chip-select */
-+ ori t1, t0, 0xa088
-+ sb $0, 0(t1)
-+ ori t1, t0, 0xb088
-+ sb $0, 0(t1)
-+
-+ /*
-+ * jump to resume entry point
-+ */
-+ la t0, CPM_SPR
-+ lw t1, 0(t0)
-+ li t0, 0x80000000
-+ or t0, t1
-+
-+ j t0
-+ nop
-+
-+#endif /* CONFIG_JZ4730 */
-diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
-index 426bb95..6e5fbd3 100644
---- a/drivers/mtd/nand/nand_base.c
-+++ b/drivers/mtd/nand/nand_base.c
-@@ -109,6 +109,22 @@ static struct nand_ecclayout nand_oob_16 = {
- . length = 8}}
- };
-
-+#if defined(CONFIG_JZ4740)
-+static struct nand_ecclayout nand_oob_64 = {
-+ .eccbytes = 36,
-+ .eccpos = {
-+ 6, 7, 8, 9, 10, 11, 12, 13,
-+ 14, 15, 16, 17, 18, 19, 20, 21,
-+ 22, 23, 24, 25, 26, 27, 28, 29,
-+ 30, 31, 32, 33, 34, 35, 36, 37,
-+ 38, 39, 40, 41},
-+ .oobfree ={
-+ {.offset = 2,
-+ .length = 4},
-+ {.offset = 42,
-+ .length = 22}}
-+};
-+#else
- static struct nand_ecclayout nand_oob_64 = {
- .eccbytes = 24,
- .eccpos = {
-@@ -119,6 +135,7 @@ static struct nand_ecclayout nand_oob_64 = {
- {.offset = 2,
- .length = 38}}
- };
-+#endif
-
- static struct nand_ecclayout nand_oob_128 = {
- .eccbytes = 48,
-@@ -1116,6 +1133,60 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
- }
-
- /**
-+ * nand_read_page_hwecc_rs - [REPLACABLE] hardware rs ecc based page read function
-+ * @mtd: mtd info structure
-+ * @chip: nand chip info structure
-+ * @buf: buffer to store read data
-+ *
-+ * Not for syndrome calculating ecc controllers which need a special oob layout
-+ */
-+static int nand_read_page_hwecc_rs(struct mtd_info *mtd, struct nand_chip *chip,
-+ uint8_t *buf)
-+{
-+ int i, eccsize = chip->ecc.size;
-+ int eccbytes = chip->ecc.bytes;
-+ int eccsteps = chip->ecc.steps;
-+ uint8_t *p = buf;
-+ uint8_t *ecc_calc = chip->buffers->ecccalc;
-+ uint8_t *ecc_code = chip->buffers->ecccode;
-+ uint32_t *eccpos = chip->ecc.layout->eccpos;
-+ uint32_t page;
-+ uint8_t flag = 0;
-+
-+ page = (buf[3]<<24) + (buf[2]<<16) + (buf[1]<<8) + buf[0];
-+
-+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
-+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-+
-+ for (i = 0; i < chip->ecc.total; i++) {
-+ ecc_code[i] = chip->oob_poi[CONFIG_SYS_NAND_ECC_POS + i];
-+ if (ecc_code[i] != 0xff)
-+ flag = 1;
-+ }
-+
-+ eccsteps = chip->ecc.steps;
-+ p = buf;
-+
-+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, 0x00, -1);
-+ for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
-+ int stat;
-+ if (flag) {
-+ chip->ecc.hwctl(mtd, NAND_ECC_READ);
-+ chip->read_buf(mtd, p, eccsize);
-+ stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
-+ if (stat < 0)
-+ mtd->ecc_stats.failed++;
-+ else
-+ mtd->ecc_stats.corrected += stat;
-+ }
-+ else {
-+ chip->ecc.hwctl(mtd, NAND_ECC_READ);
-+ chip->read_buf(mtd, p, eccsize);
-+ }
-+ }
-+ return 0;
-+}
-+/**
- * nand_read_page_syndrome - [REPLACABLE] hardware ecc syndrom based page read
- * @mtd: mtd info structure
- * @chip: nand chip info structure
-@@ -1271,9 +1342,17 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
- bufpoi, page);
- else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
- ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi);
-- else
-+ else {
-+#if defined(CONFIG_JZ4740)
-+ bufpoi[0] = (uint8_t)page;
-+ bufpoi[1] = (uint8_t)(page >> 8);
-+ bufpoi[2] = (uint8_t)(page >> 16);
-+ bufpoi[3] = (uint8_t)(page >> 24);
-+#endif
-+
- ret = chip->ecc.read_page(mtd, chip, bufpoi,
- page);
-+ }
- if (ret < 0)
- break;
-
-@@ -2791,8 +2870,13 @@ int nand_scan_tail(struct mtd_info *mtd)
-
- case NAND_ECC_HW:
- /* Use standard hwecc read page function ? */
-- if (!chip->ecc.read_page)
-+ if (!chip->ecc.read_page) {
-+#if defined(CONFIG_JZ4740)
-+ chip->ecc.read_page = nand_read_page_hwecc_rs;
-+#else
- chip->ecc.read_page = nand_read_page_hwecc;
-+#endif
-+ }
- if (!chip->ecc.write_page)
- chip->ecc.write_page = nand_write_page_hwecc;
- if (!chip->ecc.read_oob)
-diff --git a/examples/standalone/mips.lds b/examples/standalone/mips.lds
-index 717b201..d4a45f8 100644
---- a/examples/standalone/mips.lds
-+++ b/examples/standalone/mips.lds
-@@ -23,8 +23,8 @@
-
- /*
- OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
--*/
- OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradbigmips")
-+*/
- OUTPUT_ARCH(mips)
- SECTIONS
- {
-diff --git a/include/asm-mips/addrspace.h b/include/asm-mips/addrspace.h
-index 3a1e6d6..2ee6920 100644
---- a/include/asm-mips/addrspace.h
-+++ b/include/asm-mips/addrspace.h
-@@ -131,7 +131,7 @@
- * Returns the uncached address of a sdram address
- */
- #ifndef __ASSEMBLY__
--#if defined(CONFIG_SOC_AU1X00) || defined(CONFIG_TB0229)
-+#if defined(CONFIG_SOC_AU1X00) || defined(CONFIG_TB0229) || defined(CONFIG_JzRISC)
- /* We use a 36 bit physical address map here and
- cannot access physical memory directly from core */
- #define UNCACHED_SDRAM(a) (((unsigned long)(a)) | 0x20000000)
-diff --git a/include/asm-mips/global_data.h b/include/asm-mips/global_data.h
-index b2c4891..23f597e 100644
---- a/include/asm-mips/global_data.h
-+++ b/include/asm-mips/global_data.h
-@@ -39,6 +39,17 @@
- typedef struct global_data {
- bd_t *bd;
- unsigned long flags;
-+#if defined(CONFIG_JZSOC)
-+ /* There are other clocks in the Jz47xx or Jz5730*/
-+ unsigned long cpu_clk; /* CPU core clock */
-+ unsigned long sys_clk; /* System bus clock */
-+ unsigned long per_clk; /* Peripheral bus clock */
-+ unsigned long mem_clk; /* Memory bus clock */
-+ unsigned long dev_clk; /* Device clock */
-+ unsigned long fb_base; /* base address of framebuffer */
-+ unsigned long boot_option; /* 1: boot from sd
-+ * 5: boot delay for 5 secs*/
-+#endif
- unsigned long baudrate;
- unsigned long have_console; /* serial_init() was called */
- phys_size_t ram_size; /* RAM size */
-diff --git a/include/lcd.h b/include/lcd.h
-index 1f85daa..997e246 100644
---- a/include/lcd.h
-+++ b/include/lcd.h
-@@ -181,8 +181,44 @@ typedef struct vidinfo {
- u_long mmio; /* Memory mapped registers */
- } vidinfo_t;
-
--#else
-+#elif defined(CONFIG_JZSOC)
-+/*
-+ * LCD controller stucture for JZSOC: JZ4730 JZ4740
-+ */
-+struct jz_fb_dma_descriptor {
-+ u_long fdadr; /* Frame descriptor address register */
-+ u_long fsadr; /* Frame source address register */
-+ u_long fidr; /* Frame ID register */
-+ u_long ldcmd; /* Command register */
-+};
-
-+/*
-+ * Jz LCD info
-+ */
-+struct jz_fb_info {
-+
-+ u_long fdadr0; /* physical address of frame/palette descriptor */
-+ u_long fdadr1; /* physical address of frame descriptor */
-+
-+ /* DMA descriptors */
-+ struct jz_fb_dma_descriptor * dmadesc_fblow;
-+ struct jz_fb_dma_descriptor * dmadesc_fbhigh;
-+ struct jz_fb_dma_descriptor * dmadesc_palette;
-+ u_long screen; /* address of frame buffer */
-+ u_long palette; /* address of palette memory */
-+ u_int palette_size;
-+};
-+typedef struct vidinfo {
-+ ushort vl_col; /* Number of columns (i.e. 640) */
-+ ushort vl_row; /* Number of rows (i.e. 480) */
-+ u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */
-+
-+ struct jz_fb_info jz_fb;
-+} vidinfo_t;
-+
-+extern vidinfo_t panel_info;
-+
-+#else
- typedef struct vidinfo {
- ushort vl_col; /* Number of columns (i.e. 160) */
- ushort vl_row; /* Number of rows (i.e. 100) */
-@@ -194,7 +230,7 @@ typedef struct vidinfo {
- void *priv; /* Pointer to driver-specific data */
- } vidinfo_t;
-
--#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 or CONFIG_ATMEL_LCD */
-+#endif /* CONFIG_MPC823, CONFIG_PXA250, CONFIG_MCC200 or CONFIG_JZ4740 */
-
- extern vidinfo_t panel_info;
-
-@@ -234,6 +270,7 @@ void lcd_show_board_info(void);
- #define LCD_COLOR4 2
- #define LCD_COLOR8 3
- #define LCD_COLOR16 4
-+#define LCD_COLOR32 5
-
- /*----------------------------------------------------------------------*/
- #if defined(CONFIG_LCD_INFO_BELOW_LOGO)
-@@ -285,13 +322,22 @@ void lcd_show_board_info(void);
- # define CONSOLE_COLOR_GREY 14
- # define CONSOLE_COLOR_WHITE 15 /* Must remain last / highest */
-
--#else
-+#elif LCD_BPP == LCD_COLOR16
-
- /*
- * 16bpp color definitions
- */
- # define CONSOLE_COLOR_BLACK 0x0000
--# define CONSOLE_COLOR_WHITE 0xffff /* Must remain last / highest */
-+# define CONSOLE_COLOR_WHITE 0xffff /* Must remain last / highest */
-+
-+#elif LCD_BPP == LCD_COLOR32
-+/*
-+ * 18,24,32 bpp color definitions
-+ */
-+# define CONSOLE_COLOR_BLACK 0x00000000
-+# define CONSOLE_COLOR_WHITE 0xffffffff /* Must remain last / highest */
-+
-+#else
-
- #endif /* color definitions */
-
-@@ -322,7 +368,7 @@ void lcd_show_board_info(void);
- #if LCD_BPP == LCD_MONOCHROME
- # define COLOR_MASK(c) ((c) | (c) << 1 | (c) << 2 | (c) << 3 | \
- (c) << 4 | (c) << 5 | (c) << 6 | (c) << 7)
--#elif (LCD_BPP == LCD_COLOR8) || (LCD_BPP == LCD_COLOR16)
-+#elif (LCD_BPP == LCD_COLOR8) || (LCD_BPP == LCD_COLOR16) || (LCD_BPP == LCD_COLOR32)
- # define COLOR_MASK(c) (c)
- #else
- # error Unsupported LCD BPP.
-diff --git a/lib_mips/board.c b/lib_mips/board.c
-index b2d113e..87cb12d 100644
---- a/lib_mips/board.c
-+++ b/lib_mips/board.c
-@@ -49,6 +49,10 @@ DECLARE_GLOBAL_DATA_PTR;
-
- #undef DEBUG
-
-+#if defined(CONFIG_JZSOC)
-+extern int jz_board_init(void);
-+#endif
-+
- extern int timer_init(void);
-
- extern int incaip_set_cpuclk(void);
-@@ -78,7 +82,6 @@ int __board_early_init_f(void)
- }
- int board_early_init_f(void) __attribute__((weak, alias("__board_early_init_f")));
-
--
- static int init_func_ram (void)
- {
- #ifdef CONFIG_BOARD_TYPES
-@@ -98,7 +101,6 @@ static int init_func_ram (void)
-
- static int display_banner(void)
- {
--
- printf ("\n\n%s\n\n", version_string);
- return (0);
- }
-@@ -147,6 +149,9 @@ static int init_baudrate (void)
- typedef int (init_fnc_t) (void);
-
- init_fnc_t *init_sequence[] = {
-+#if defined(CONFIG_JZSOC)
-+ jz_board_init, /* init gpio/clocks/dram etc. */
-+#endif
- board_early_init_f,
- timer_init,
- env_init, /* initialize environment */
-@@ -162,7 +167,6 @@ init_fnc_t *init_sequence[] = {
- NULL,
- };
-
--
- void board_init_f(ulong bootflag)
- {
- gd_t gd_data, *id;
-@@ -202,6 +206,12 @@ void board_init_f(ulong bootflag)
- addr &= ~(4096 - 1);
- debug ("Top of RAM usable for U-Boot at: %08lx\n", addr);
-
-+#ifdef CONFIG_LCD
-+ /* reserve memory for LCD display (always full pages) */
-+ addr = lcd_setmem (addr);
-+ gd->fb_base = addr;
-+#endif /* CONFIG_LCD */
-+
- /* Reserve memory for U-Boot code, data & bss
- * round down to next 16 kB limit
- */
-@@ -349,9 +359,9 @@ void board_init_r (gd_t *id, ulong dest_addr)
- size = flash_init();
- display_flash_config (size);
- bd->bi_flashsize = size;
-+ bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
- #endif
-
-- bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
- #if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
- bd->bi_flashoffset = monitor_flash_len; /* reserved area for U-Boot */
- #else
-diff --git a/lib_mips/bootm.c b/lib_mips/bootm.c
-index 54af24c..64bcad9 100644
---- a/lib_mips/bootm.c
-+++ b/lib_mips/bootm.c
-@@ -46,7 +46,9 @@ static void linux_env_set (char * env_name, char * env_val);
- int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
- {
- void (*theKernel) (int, char **, char **, int *);
-- char *commandline = getenv ("bootargs");
-+ char *commandline = gd->boot_option == 1 ?
-+ getenv ("bootargsfromsd") :
-+ getenv ("bootargs");
- char env_buf[12];
- char *cp;
-
-@@ -98,6 +100,9 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
- }
-
- /* we assume that the kernel is in place */
-+ if (gd->boot_option == 1)
-+ printf ("\n *** Booting from mircoSD ***\n");
-+
- printf ("\nStarting kernel ...\n\n");
-
- theKernel (linux_argc, linux_argv, linux_env, 0);
-diff --git a/lib_mips/time.c b/lib_mips/time.c
-index 07e356d..4654bf4 100644
---- a/lib_mips/time.c
-+++ b/lib_mips/time.c
-@@ -24,6 +24,8 @@
- #include <common.h>
- #include <asm/mipsregs.h>
-
-+#ifndef CONFIG_JzRISC
-+
- static unsigned long timestamp;
-
- /* how many counter cycles in a jiffy */
-@@ -96,3 +98,5 @@ ulong get_tbclk(void)
- {
- return CONFIG_SYS_HZ;
- }
-+
-+#endif /* !CONFIG_JzRISC */
-
diff --git a/package/boot/uboot-xburst/patches/005-i2c.patch b/package/boot/uboot-xburst/patches/005-i2c.patch
deleted file mode 100644
index b8ad22f..0000000
--- a/package/boot/uboot-xburst/patches/005-i2c.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
-index ef32f13..4e234b4 100644
---- a/drivers/i2c/Makefile
-+++ b/drivers/i2c/Makefile
-@@ -36,6 +36,7 @@ COBJS-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o
- COBJS-$(CONFIG_S3C44B0_I2C) += s3c44b0_i2c.o
- COBJS-$(CONFIG_SOFT_I2C) += soft_i2c.o
- COBJS-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
-+COBJS-$(CONFIG_JZSOC_I2C) += jz_i2c.o
-
- COBJS := $(COBJS-y)
- SRCS := $(COBJS:.o=.c)
-
diff --git a/package/boot/uboot-xburst/patches/009-n516.patch b/package/boot/uboot-xburst/patches/009-n516.patch
deleted file mode 100644
index 49eaf3d..0000000
--- a/package/boot/uboot-xburst/patches/009-n516.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-diff --git a/Makefile b/Makefile
-index ed848f5..04cd32e 100644
---- a/Makefile
-+++ b/Makefile
-@@ -3448,6 +3448,18 @@ pavo_nand_config : unconfig
- @echo "TEXT_BASE = 0x80100000" > $(obj)board/qi_lb60/config.tmp
- @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-
-+n516_config : unconfig
-+ @ >include/config.h
-+ @echo "#define CONFIG_N516 1" >>include/config.h
-+ @./mkconfig -a n516 mips mips n516
-+
-+n516_nand_config : unconfig
-+ @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
-+ @echo "Compile NAND boot image for n516"
-+ @./mkconfig -a n516 mips mips n516
-+ @echo "TEXT_BASE = 0x80100000" > $(obj)board/n516/config.tmp
-+ @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-+
- #########################################################################
- ## MIPS64 5Kc
- #########################################################################
diff --git a/package/boot/uboot-xburst/patches/010-sakc.patch b/package/boot/uboot-xburst/patches/010-sakc.patch
deleted file mode 100644
index 2ec82b7..0000000
--- a/package/boot/uboot-xburst/patches/010-sakc.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-diff --git a/Makefile b/Makefile
-index a318eb4..7d14b8b 100644
---- a/Makefile
-+++ b/Makefile
-@@ -3448,6 +3448,13 @@ qi_lb60_config : unconfig
- @echo "TEXT_BASE = 0x80100000" > $(obj)board/n516/config.tmp
- @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-
-+sakc_config : unconfig
-+ @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
-+ @echo "Compile NAND boot image for SAKC"
-+ @$(MKCONFIG) -a sakc mips mips sakc
-+ @echo "TEXT_BASE = 0x80100000" > $(obj)board/sakc/config.tmp
-+ @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-+
- #########################################################################
- ## MIPS64 5Kc
- #########################################################################
-diff --git a/cpu/mips/Makefile b/cpu/mips/Makefile
-index 33afb66..a177653 100644
---- a/cpu/mips/Makefile
-+++ b/cpu/mips/Makefile
-@@ -35,7 +35,7 @@ COBJS-$(CONFIG_PURPLE) += asc_serial.o
- COBJS-$(CONFIG_JZSOC) += jz_serial.o jz_i2c.o jz_mmc.o
- COBJS-$(CONFIG_JZ4740) += jz4740.o jz4740_nand.o
- COBJS-$(CONFIG_NANONOTE) += nanonote_gpm940b0.o
--
-+COBJS-$(CONFIG_SAKC) += nanonote_gpm940b0.o
-
- SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
- OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-