summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorFelix Fietkau <nbd@openwrt.org>2009-04-23 14:27:16 +0000
committerFelix Fietkau <nbd@openwrt.org>2009-04-23 14:27:16 +0000
commita0c097720d195f4fbb05721d26697114a3982fc4 (patch)
treeca77f0ebc13b62d96559be8180cf2167a654bbaa
parentf778c81d5f1f6c3528f6d84b2aad9157227cf444 (diff)
downloadmtk-20170518-a0c097720d195f4fbb05721d26697114a3982fc4.zip
mtk-20170518-a0c097720d195f4fbb05721d26697114a3982fc4.tar.gz
mtk-20170518-a0c097720d195f4fbb05721d26697114a3982fc4.tar.bz2
brcm47xx: 2.6.28 was accidentally committed with the old (and conceptually broken) b44 phy fix. replace it with my cleaned up version from 2.6.25 (thx, netprince)
SVN-Revision: 15351
-rw-r--r--target/linux/brcm47xx/patches-2.6.28/210-b44_phy_fix.patch50
1 files changed, 16 insertions, 34 deletions
diff --git a/target/linux/brcm47xx/patches-2.6.28/210-b44_phy_fix.patch b/target/linux/brcm47xx/patches-2.6.28/210-b44_phy_fix.patch
index f990b85..e38332e 100644
--- a/target/linux/brcm47xx/patches-2.6.28/210-b44_phy_fix.patch
+++ b/target/linux/brcm47xx/patches-2.6.28/210-b44_phy_fix.patch
@@ -1,5 +1,14 @@
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
+@@ -339,7 +339,7 @@ static int b44_phy_reset(struct b44 *bp)
+ }
+ }
+
+- return 0;
++ return err;
+ }
+
+ static void __b44_set_flow_ctrl(struct b44 *bp, u32 pause_flags)
@@ -384,7 +384,7 @@ static void b44_set_flow_ctrl(struct b44
__b44_set_flow_ctrl(bp, pause_enab);
}
@@ -9,41 +18,14 @@
extern char *nvram_get(char *name);
static void b44_wap54g10_workaround(struct b44 *bp)
{
-@@ -2068,6 +2068,28 @@ out:
- return err;
- }
+@@ -2213,6 +2213,10 @@ static int __devinit b44_init_one(struct
+ */
+ b44_chip_reset(bp, B44_CHIP_RESET_FULL);
-+#ifdef CONFIG_SSB_DRIVER_MIPS
-+static void b44_wrtsl54gs_workaround(struct b44 *bp)
-+{
-+ const char *str;
-+
-+ /*
-+ * workaround for physical wiring in Linksys WRSL54GS
-+ * see https://dev.openwrt.org/ticket/2662 and 3903
-+ * eth1 PHY is probably on BCM5325 switch accessed via eth0
-+ */
-+ str = nvram_get("boardnum");
-+ if (!str)
-+ return;
-+ if (simple_strtoul(str, NULL, 0) == 42) {
++ /* do a phy reset to test if there is an active phy */
++ if (b44_phy_reset(bp) < 0)
+ bp->phy_addr = B44_PHY_ADDR_NO_PHY;
-+ }
-+ return;
-+}
-+#else
-+static void b44_wrtsl54gs_workaround(struct b44 *bp) { }
-+#endif
-+
- static int __devinit b44_get_invariants(struct b44 *bp)
- {
- struct ssb_device *sdev = bp->sdev;
-@@ -2089,6 +2111,8 @@ static int __devinit b44_get_invariants(
- * valid PHY address. */
- bp->phy_addr &= 0x1F;
-
-+ b44_wrtsl54gs_workaround(bp);
+
- memcpy(bp->dev->dev_addr, addr, 6);
+ printk(KERN_INFO "%s: Broadcom 44xx/47xx 10/100BaseT Ethernet %s\n",
+ dev->name, print_mac(mac, dev->dev_addr));
- if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){