summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorFelix Fietkau <nbd@openwrt.org>2012-04-16 21:13:18 +0000
committerFelix Fietkau <nbd@openwrt.org>2012-04-16 21:13:18 +0000
commitb138bca2908456bf7f7a90089e42efd3e8a05c48 (patch)
treec848c2ebab4eb134ef8125c06d243bf2a810beed
parentc0c371b58134d391f46de6dabf2bd0a96267cb38 (diff)
downloadmtk-20170518-b138bca2908456bf7f7a90089e42efd3e8a05c48.zip
mtk-20170518-b138bca2908456bf7f7a90089e42efd3e8a05c48.tar.gz
mtk-20170518-b138bca2908456bf7f7a90089e42efd3e8a05c48.tar.bz2
iw: sync nl80211.h update with compat-wireless
SVN-Revision: 31323
-rw-r--r--package/iw/patches/001-nl80211_h_sync.patch221
1 files changed, 214 insertions, 7 deletions
diff --git a/package/iw/patches/001-nl80211_h_sync.patch b/package/iw/patches/001-nl80211_h_sync.patch
index 544df9d..cccc144 100644
--- a/package/iw/patches/001-nl80211_h_sync.patch
+++ b/package/iw/patches/001-nl80211_h_sync.patch
@@ -1,6 +1,121 @@
--- a/nl80211.h
+++ b/nl80211.h
-@@ -1475,6 +1475,7 @@ enum nl80211_attrs {
+@@ -156,21 +156,23 @@
+ * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
+ * or %NL80211_ATTR_MAC.
+ *
+- * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a
+- * %NL80222_CMD_NEW_BEACON message)
+- * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface
+- * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD,
+- * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes.
+- * Following attributes are provided for drivers that generate full Beacon
+- * and Probe Response frames internally: %NL80211_ATTR_SSID,
++ * @NL80211_CMD_GET_BEACON: (not used)
++ * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface
++ * using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL
++ * attributes. For drivers that generate the beacon and probe responses
++ * internally, the following attributes must be provided: %NL80211_ATTR_IE,
++ * %NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP.
++ * @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters
++ * are like for %NL80211_CMD_SET_BEACON, and additionally parameters that
++ * do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL,
++ * %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID,
+ * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
+ * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
+ * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
+- * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_IE, %NL80211_ATTR_IE_PROBE_RESP,
+- * %NL80211_ATTR_IE_ASSOC_RESP.
+- * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface,
+- * parameters are like for %NL80211_CMD_SET_BEACON.
+- * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it
++ * %NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT.
++ * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
++ * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface
++ * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP
+ *
+ * @NL80211_CMD_GET_STATION: Get station attributes for station identified by
+ * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
+@@ -367,6 +369,11 @@
+ * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
+ * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
+ * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
++ * Background scan period can optionally be
++ * specified in %NL80211_ATTR_BG_SCAN_PERIOD,
++ * if not specified default background scan configuration
++ * in driver is used and if period value is 0, bg scan will be disabled.
++ * This attribute is ignored if driver does not support roam scan.
+ * It is also sent as an event, with the BSSID and response IEs when the
+ * connection is established or failed to be established. This can be
+ * determined by the STATUS_CODE attribute.
+@@ -541,6 +548,11 @@
+ * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether
+ * No Acknowledgement Policy should be applied.
+ *
++ * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels
++ * independently of the userspace SME, send this event indicating
++ * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with
++ * %NL80211_ATTR_WIPHY_CHANNEL_TYPE.
++ *
+ * @NL80211_CMD_MAX: highest used command number
+ * @__NL80211_CMD_AFTER_LAST: internal use
+ */
+@@ -565,8 +577,10 @@ enum nl80211_commands {
+
+ NL80211_CMD_GET_BEACON,
+ NL80211_CMD_SET_BEACON,
+- NL80211_CMD_NEW_BEACON,
+- NL80211_CMD_DEL_BEACON,
++ NL80211_CMD_START_AP,
++ NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP,
++ NL80211_CMD_STOP_AP,
++ NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP,
+
+ NL80211_CMD_GET_STATION,
+ NL80211_CMD_SET_STATION,
+@@ -680,6 +694,8 @@ enum nl80211_commands {
+
+ NL80211_CMD_SET_NOACK_MAP,
+
++ NL80211_CMD_CH_SWITCH_NOTIFY,
++
+ /* add new commands above here */
+
+ /* used to define NL80211_CMD_MAX below */
+@@ -1193,6 +1209,19 @@ enum nl80211_commands {
+ * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of
+ * up to 16 TIDs.
+ *
++ * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be
++ * used by the drivers which has MLME in firmware and does not have support
++ * to report per station tx/rx activity to free up the staion entry from
++ * the list. This needs to be used when the driver advertises the
++ * capability to timeout the stations.
++ *
++ * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int);
++ * this attribute is (depending on the driver capabilities) added to
++ * received frames indicated with %NL80211_CMD_FRAME.
++ *
++ * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds
++ * or 0 to disable background scan.
++ *
+ * @NL80211_ATTR_MAX: highest attribute number currently defined
+ * @__NL80211_ATTR_AFTER_LAST: internal use
+ */
+@@ -1438,6 +1467,12 @@ enum nl80211_attrs {
+
+ NL80211_ATTR_NOACK_MAP,
+
++ NL80211_ATTR_INACTIVITY_TIMEOUT,
++
++ NL80211_ATTR_RX_SIGNAL_DBM,
++
++ NL80211_ATTR_BG_SCAN_PERIOD,
++
+ /* add attributes here, update the policy in nl80211.c */
+
+ __NL80211_ATTR_AFTER_LAST,
+@@ -1475,6 +1510,7 @@ enum nl80211_attrs {
#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
#define NL80211_MAX_SUPP_RATES 32
@@ -8,7 +123,7 @@
#define NL80211_MAX_SUPP_REG_RULES 32
#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0
#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
-@@ -1536,7 +1537,11 @@ enum nl80211_iftype {
+@@ -1536,7 +1572,11 @@ enum nl80211_iftype {
* @NL80211_STA_FLAG_WME: station is WME/QoS capable
* @NL80211_STA_FLAG_MFP: station uses management frame protection
* @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated
@@ -21,45 +136,123 @@
* @NL80211_STA_FLAG_MAX: highest station flag number currently defined
* @__NL80211_STA_FLAG_AFTER_LAST: internal use
*/
-@@ -1651,6 +1656,9 @@ enum nl80211_sta_bss_param {
+@@ -1651,6 +1691,10 @@ enum nl80211_sta_bss_param {
* containing info as possible, see &enum nl80211_sta_bss_param
* @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected
* @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
+ * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
++ * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64)
+ * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU
+ * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
* @__NL80211_STA_INFO_AFTER_LAST: internal
* @NL80211_STA_INFO_MAX: highest possible station info attribute
*/
-@@ -1673,6 +1681,9 @@ enum nl80211_sta_info {
+@@ -1673,6 +1717,10 @@ enum nl80211_sta_info {
NL80211_STA_INFO_BSS_PARAM,
NL80211_STA_INFO_CONNECTED_TIME,
NL80211_STA_INFO_STA_FLAGS,
+ NL80211_STA_INFO_BEACON_LOSS,
++ NL80211_STA_INFO_T_OFFSET,
+ NL80211_STA_INFO_CHAIN_SIGNAL,
+ NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
-@@ -2098,6 +2109,9 @@ enum nl80211_mntr_flags {
+@@ -2098,8 +2146,18 @@ enum nl80211_mntr_flags {
* TUs) during which a mesh STA can send only one Action frame containing a
* PERR element.
*
+ * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding
+ * or forwarding entity (default is TRUE - forwarding entity)
+ *
++ * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the
++ * threshold for average signal strength of candidate station to establish
++ * a peer link.
++ *
* @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
*
++ * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors
++ * to synchronize to for 11s default synchronization method (see 11C.12.2.2)
++ *
* @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
-@@ -2122,6 +2136,7 @@ enum nl80211_meshconf_params {
+ */
+ enum nl80211_meshconf_params {
+@@ -2122,6 +2180,9 @@ enum nl80211_meshconf_params {
NL80211_MESHCONF_HWMP_RANN_INTERVAL,
NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,
+ NL80211_MESHCONF_FORWARDING,
++ NL80211_MESHCONF_RSSI_THRESHOLD,
++ NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
/* keep last */
__NL80211_MESHCONF_ATTR_AFTER_LAST,
-@@ -2395,12 +2410,15 @@ enum nl80211_key_attributes {
+@@ -2161,6 +2222,11 @@ enum nl80211_meshconf_params {
+ * complete (unsecured) mesh peering without the need of a userspace daemon.
+ *
+ * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
++ *
++ * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a
++ * vendor specific synchronization method or disable it to use the default
++ * neighbor offset synchronization
++ *
+ * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
+ */
+ enum nl80211_mesh_setup_params {
+@@ -2170,6 +2236,7 @@ enum nl80211_mesh_setup_params {
+ NL80211_MESH_SETUP_IE,
+ NL80211_MESH_SETUP_USERSPACE_AUTH,
+ NL80211_MESH_SETUP_USERSPACE_AMPE,
++ NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC,
+
+ /* keep last */
+ __NL80211_MESH_SETUP_ATTR_AFTER_LAST,
+@@ -2179,7 +2246,7 @@ enum nl80211_mesh_setup_params {
+ /**
+ * enum nl80211_txq_attr - TX queue parameter attributes
+ * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
+- * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*)
++ * @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*)
+ * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
+ * disabled
+ * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
+@@ -2192,7 +2259,7 @@ enum nl80211_mesh_setup_params {
+ */
+ enum nl80211_txq_attr {
+ __NL80211_TXQ_ATTR_INVALID,
+- NL80211_TXQ_ATTR_QUEUE,
++ NL80211_TXQ_ATTR_AC,
+ NL80211_TXQ_ATTR_TXOP,
+ NL80211_TXQ_ATTR_CWMIN,
+ NL80211_TXQ_ATTR_CWMAX,
+@@ -2203,13 +2270,21 @@ enum nl80211_txq_attr {
+ NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1
+ };
+
+-enum nl80211_txq_q {
+- NL80211_TXQ_Q_VO,
+- NL80211_TXQ_Q_VI,
+- NL80211_TXQ_Q_BE,
+- NL80211_TXQ_Q_BK
++enum nl80211_ac {
++ NL80211_AC_VO,
++ NL80211_AC_VI,
++ NL80211_AC_BE,
++ NL80211_AC_BK,
++ NL80211_NUM_ACS
+ };
+
++/* backward compat */
++#define NL80211_TXQ_ATTR_QUEUE NL80211_TXQ_ATTR_AC
++#define NL80211_TXQ_Q_VO NL80211_AC_VO
++#define NL80211_TXQ_Q_VI NL80211_AC_VI
++#define NL80211_TXQ_Q_BE NL80211_AC_BE
++#define NL80211_TXQ_Q_BK NL80211_AC_BK
++
+ enum nl80211_channel_type {
+ NL80211_CHAN_NO_HT,
+ NL80211_CHAN_HT20,
+@@ -2395,12 +2470,15 @@ enum nl80211_key_attributes {
* in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with
* 1 = 500 kbps) but without the IE length restriction (at most
* %NL80211_MAX_SUPP_RATES in a single array).
@@ -75,3 +268,17 @@
/* keep last */
__NL80211_TXRATE_AFTER_LAST,
+@@ -2786,10 +2864,13 @@ enum nl80211_ap_sme_features {
+ * TX status to the socket error queue when requested with the
+ * socket option.
+ * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates.
++ * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up
++ * the connected inactive stations in AP mode.
+ */
+ enum nl80211_feature_flags {
+ NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
+ NL80211_FEATURE_HT_IBSS = 1 << 1,
++ NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
+ };
+
+ /**