diff options
| author | John Crispin <john@openwrt.org> | 2015-11-02 10:18:02 +0000 |
|---|---|---|
| committer | John Crispin <john@openwrt.org> | 2015-11-02 10:18:02 +0000 |
| commit | 907c67fa87143dacd91cc4370f6b85a8fb3d0d12 (patch) | |
| tree | d9f2f686cb61740a14eddb6171a12d7c7da75739 | |
| parent | 3760b95702b65de9d6d0f6a1029a654e3b11f72f (diff) | |
| download | mtk-20170518-907c67fa87143dacd91cc4370f6b85a8fb3d0d12.zip mtk-20170518-907c67fa87143dacd91cc4370f6b85a8fb3d0d12.tar.gz mtk-20170518-907c67fa87143dacd91cc4370f6b85a8fb3d0d12.tar.bz2 | |
ramips: preinit: use iproute2 instead of vconfig
Replace use of vconfig with the corresponding iproute2 syntax in
/lib/preinit/07_set_preinit_iface_ramips
The switch reset work-around needed on some ramips targets used the
deprecated vconfig tool to bring up the pre-init/failsafe interface.
This doesn't work on recent builds where vconfig is no longer being
deployed, resulting in the device being unreachable when triggered
into failsafe mode.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 47349
| -rw-r--r-- | target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips b/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips index 90b6d15..3dce1b6 100644 --- a/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips +++ b/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips @@ -23,8 +23,8 @@ ramips_set_preinit_iface() { swconfig dev rt305x vlan 1 set ports "0 6" swconfig dev rt305x port 6 set untag 0 swconfig dev rt305x set apply 1 - vconfig add eth0 1 - ifconfig eth0 up + ip link add link eth0 name eth0.1 type vlan id 1 + ip link set eth0 up ifname=eth0.1 else ifname=eth0 |