ramips: introduce DTS for ALL5003

Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c.
With the change to DTS, this is no longer accurate, as ALL5002 is based on
Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding
rt5350.dtsi need to be included for ALL5003.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3557/
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36435

9 files changed, 133 insertions, 4 deletions

diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 538047b..320e01d 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -59,6 +59,7 @@ case "$FIRMWARE" in
 	all0239-3g | \
 	all0256n | \
 	all5002 | \
+	all5003 | \
 	argus-atp52b | \
 	bc2 | \
 	br6425 | \
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index b3d87d2..41907bf 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -41,6 +41,7 @@ ramips_setup_interfaces()
 	w150m | \
 	all0256n | \
 	all5002 | \
+	all5003 | \
 	broadway | \
 	wnce2001)
 		ucidef_add_switch "switch0" "1" "0"
diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index 7becaf7..022f72e 100644
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -53,6 +53,7 @@ preinit_set_mac_address() {
 	all0239-3g |\
 	all0256n |\
 	all5002 |\
+	all5003 |\
 	carambola |\
 	dir-615-h1 |\
 	fonera20n |\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index c1355bc..99bdbdd 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -48,9 +48,12 @@ ramips_board_detect() {
 	*"Allnet ALL0256N")
 		name="all0256n"
 		;;
-	*"Allnet ALL5002/ALL5003")
+	*"Allnet ALL5002")
 		name="all5002"
 		;;
+	*"Allnet ALL5003")
+		name="all5003"
+		;;
 	*"ARC FreeStation5")
 		name="freestation5"
 		;;
@@ -212,7 +215,7 @@ ramips_board_detect() {
 		;;
 	*"UR-326N4G Wireless N router")
 		name="ur-326n4g"
- 		;;
+		;;
 	*"UR-336UN Wireless N router")
 		name="ur-336un"
 		;;
@@ -228,7 +231,7 @@ ramips_board_detect() {
 	esac
 
 	case "$machine" in
-	*"Allnet ALL5002/ALL5003")
+	*"Allnet ALL500"[23]*)
 		all500x_board_detect
 		;;
 	esac
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 15c0007..b2fa0bd 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -22,6 +22,7 @@ platform_check_image() {
 	all0239-3g | \
 	all0256n | \
 	all5002 | \
+	all5003 | \
 	asl26555 | \
 	bc2 | \
 	broadway | \
diff --git a/target/linux/ramips/dts/ALL5002.dts b/target/linux/ramips/dts/ALL5002.dts
index fb704f3..0ede2e3 100644
--- a/target/linux/ramips/dts/ALL5002.dts
+++ b/target/linux/ramips/dts/ALL5002.dts
@@ -4,7 +4,7 @@
 
 / {
 	compatible = "ALL5002", "ralink,rt3352-soc";
-	model = "Allnet ALL5002/ALL5003";
+	model = "Allnet ALL5002";
 
 	palmbus@10000000 {
 		sysc@0 {
diff --git a/target/linux/ramips/dts/ALL5003.dts b/target/linux/ramips/dts/ALL5003.dts
new file mode 100644
index 0000000..581304e
--- /dev/null
+++ b/target/linux/ramips/dts/ALL5003.dts
@@ -0,0 +1,108 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+	compatible = "ALL5003", "ralink,rt5350-soc";
+	model = "Allnet ALL5003";
+
+	palmbus@10000000 {
+		sysc@0 {
+			ralink,pinmux = "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+			ralink,gpiomux = "i2c";
+			ralink,uartmux = "gpio";
+			ralink,wdtmux = <1>;
+		};
+
+		gpio0: gpio@600 {
+			status = "okay";
+		};
+
+		spi@b00 {
+			status = "okay";
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mx25l25635e";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "mx25l25635e";
+				spi-max-frequency = <10000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition@30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+
+		factory: partition@40000 {
+			label = "factory";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+
+		partition@50000 {
+			label = "firmware";
+			reg = <0x50000 0x1fb0000>;
+		};
+			};
+		};
+	};
+
+	ethernet@10100000 {
+		status = "okay";
+	};
+
+	esw@10110000 {
+		status = "okay";
+		ralink,portmap = <0x3f>;
+	};
+
+	wmac@10180000 {
+		status = "okay";
+	};
+
+	ehci@101c0000 {
+		status = "okay";
+	};
+
+	ohci@101c1000 {
+		status = "okay";
+	};
+
+	i2c-gpio {
+		compatible = "i2c-gpio";
+
+		gpios = <&gpio0 1 0 &gpio0 2 0>;
+		i2c-gpio,delay-us = <10>;
+
+		pcf0: iexp@38 {
+			#gpio-cells = <2>;
+			compatible = "inxp,pcf8574a";
+			reg = <0x38>;
+			gpio-controller;
+		};
+
+		hwmon@4b {
+			compatible = "national,lm92";
+			reg = <0x4b>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		ld1 {
+			label = "allnet:green:ld1";
+			gpios = <&pcf0 0 1>;
+		};
+		ld2 {
+			label = "allnet:green:ld2";
+			gpios = <&pcf0 1 1>;
+		};
+	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 99d4702..621f23e 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -265,6 +265,7 @@ Image/Build/Profile/ALL0256N=$(call BuildFirmware/DefaultDualSize/$(1),$(1),all0
 
 allnet_all5002_mtd_size=33226752
 Image/Build/Profile/ALL5002=$(call BuildFirmware/CustomFlash/$(1),$(1),all5002,ALL5002,$(allnet_all5002_mtd_size))
+Image/Build/Profile/ALL5003=$(call BuildFirmware/CustomFlash/$(1),$(1),all5003,ALL5003,$(allnet_all5002_mtd_size))
 
 argus_atp52b_mtd_size=7995392
 Image/Build/Profile/ARGUS_ATP52B=$(call BuildFirmware/CustomFlash/$(1),$(1),argus_atp52b,ARGUS_ATP52B,$(argus_atp52b_mtd_size))
@@ -436,6 +437,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/ALL02393G,$(1))
 	$(call Image/Build/Profile/ALL0256N,$(1))
 	$(call Image/Build/Profile/ALL5002,$(1))
+	$(call Image/Build/Profile/ALL5003,$(1))
 	$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
 	$(call Image/Build/Profile/ASL26555,$(1))
 	$(call Image/Build/Profile/BC2,$(1))
diff --git a/target/linux/ramips/rt305x/profiles/allnet.mk b/target/linux/ramips/rt305x/profiles/allnet.mk
index 4ec2ffd..858891f 100644
--- a/target/linux/ramips/rt305x/profiles/allnet.mk
+++ b/target/linux/ramips/rt305x/profiles/allnet.mk
@@ -40,3 +40,15 @@ define Profile/ALL5002/Description
 endef
 
 $(eval $(call Profile,ALL5002))
+
+define Profile/ALL5003
+	NAME:=Allnet ALL5003
+	PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev \
+	kmod-i2c-core kmod-i2c-gpio kmod-hwmon-lm92 kmod-gpio-pcf857x
+endef
+
+define Profile/ALL5003/Description
+	Package set for Allnet ALL5003
+endef
+
+$(eval $(call Profile,ALL5003))