hostapd: update to 0.6.8

SVN-Revision: 14544

4 files changed, 19 insertions, 199 deletions

diff --git a/package/hostapd/Makefile b/package/hostapd/Makefile
index fcea017..a0da7a7 100644
--- a/package/hostapd/Makefile
+++ b/package/hostapd/Makefile
@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2006-2008 OpenWrt.org
+# Copyright (C) 2006-2009 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -9,14 +9,14 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=hostapd
-PKG_VERSION:=0.6.7
+PKG_VERSION:=0.6.8
 PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=http://hostap.epitest.fi/releases/
 PKG_SOURCE_SUBDIR:=hostapd-$(PKG_VERSION)
 PKG_SOURCE_VERSION:=$(PKG_REV)
-PKG_MD5SUM:=0ce66cd5768235b5d2299f9efb9225d8
+PKG_MD5SUM:=4b183183e20af1386017e9f499184ee1
 PKG_BUILD_DEPENDS:=PACKAGE_kmod-madwifi:madwifi PACKAGE_kmod-mac80211:mac80211 PACKAGE_kmod-mac80211:libnl
 
 include $(INCLUDE_DIR)/package.mk
@@ -54,7 +54,7 @@ endef
 #endef
 
 define Package/hostapd/description
- This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS 
+ This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
  Authenticator.
 endef
 
@@ -68,7 +68,7 @@ endef
 #endef
 
 define Package/hostapd-mini/description
- This package contains a minimal IEEE 802.1x/WPA/EAP/RADIUS Authenticator 
+ This package contains a minimal IEEE 802.1x/WPA/EAP/RADIUS Authenticator
  (WPA-PSK only).
 endef
 
@@ -79,7 +79,7 @@ define Package/hostapd-utils
 endef
 
 define Package/hostapd-utils/description
- This package contains a command line utility to control the 
+ This package contains a command line utility to control the
  IEEE 802.1x/WPA/EAP/RADIUS Authenticator.
 endef
 
@@ -112,7 +112,7 @@ define Package/InstallTemplate
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd.$(2)/hostapd/hostapd $$(1)/usr/sbin/
 # config is managed through uci
 #	$(INSTALL_DIR) $$(1)/etc
-#	$(INSTALL_CONF) $(PKG_BUILD_DIR)/hostapd.$(2)/hostapd/hostapd.conf $$(1)/etc/hostapd.conf 
+#	$(INSTALL_CONF) $(PKG_BUILD_DIR)/hostapd.$(2)/hostapd/hostapd.conf $$(1)/etc/hostapd.conf
 endef
 
 define Package/Template
diff --git a/package/hostapd/patches/100-madwifi_fix.patch b/package/hostapd/patches/100-madwifi_fix.patch
index 47ce89d..8f8be44 100644
--- a/package/hostapd/patches/100-madwifi_fix.patch
+++ b/package/hostapd/patches/100-madwifi_fix.patch
@@ -1,6 +1,6 @@
 --- a/hostapd/driver_madwifi.c
 +++ b/hostapd/driver_madwifi.c
-@@ -310,6 +310,7 @@ madwifi_set_iface_flags(void *priv, int 
+@@ -312,6 +312,7 @@ madwifi_set_iface_flags(void *priv, int 
  {
  	struct madwifi_driver_data *drv = priv;
  	struct ifreq ifr;
@@ -8,7 +8,7 @@
  
  	wpa_printf(MSG_DEBUG, "%s: dev_up=%d", __func__, dev_up);
  
-@@ -324,10 +325,14 @@ madwifi_set_iface_flags(void *priv, int 
+@@ -326,10 +327,14 @@ madwifi_set_iface_flags(void *priv, int 
  		return -1;
  	}
  
diff --git a/package/hostapd/patches/110-nl80211_socketfilter.patch b/package/hostapd/patches/110-nl80211_socketfilter.patch
deleted file mode 100644
index 4427d00..0000000
--- a/package/hostapd/patches/110-nl80211_socketfilter.patch
+++ /dev/null
@@ -1,184 +0,0 @@
---- a/hostapd/driver_nl80211.c
-+++ b/hostapd/driver_nl80211.c
-@@ -27,6 +27,7 @@
- #include <net/if.h>
- #include <netpacket/packet.h>
- #include "wireless_copy.h"
-+#include <linux/filter.h>
- #include <net/if_arp.h>
- 
- #include "hostapd.h"
-@@ -1728,6 +1729,9 @@ static void handle_frame(struct hostapd_
- 		case WLAN_FC_TODS:
- 			bssid = hdr->addr1;
- 			break;
-+		case WLAN_FC_FROMDS:
-+			bssid = hdr->addr2;
-+			break;
- 		default:
- 			/* discard */
- 			return;
-@@ -1908,6 +1912,150 @@ static void handle_monitor_read(int sock
- }
- 
- 
-+/*
-+ * we post-process the filter code later and rewrite
-+ * this to the offset to the last instruction
-+ */
-+#define PASS	0xFF
-+#define FAIL	0xFE
-+
-+static struct sock_filter msock_filter_insns[] = {
-+	/*
-+	 * do a little-endian load of the radiotap length field
-+	 */
-+	/* load lower byte into A */
-+	BPF_STMT(BPF_LD  | BPF_B | BPF_ABS, 2),
-+	/* put it into X (== index register) */
-+	BPF_STMT(BPF_MISC| BPF_TAX, 0),
-+	/* load upper byte into A */
-+	BPF_STMT(BPF_LD  | BPF_B | BPF_ABS, 3),
-+	/* left-shift it by 8 */
-+	BPF_STMT(BPF_ALU | BPF_LSH | BPF_K, 8),
-+	/* or with X */
-+	BPF_STMT(BPF_ALU | BPF_OR | BPF_X, 0),
-+	/* put result into X */
-+	BPF_STMT(BPF_MISC| BPF_TAX, 0),
-+
-+	/*
-+	 * Allow management frames through, this also gives us those
-+	 * management frames that we sent ourselves with status
-+	 */
-+	/* load the lower byte of the IEEE 802.11 frame control field */
-+	BPF_STMT(BPF_LD  | BPF_B | BPF_IND, 0),
-+	/* mask off frame type and version */
-+	BPF_STMT(BPF_ALU | BPF_AND | BPF_K, 0xF),
-+	/* accept frame if it's both 0, fall through otherwise */
-+	BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, 0, PASS, 0),
-+
-+	/*
-+	 * TODO: add a bit to radiotap RX flags that indicates
-+	 * that the sending station is not associated, then
-+	 * add a filter here that filters on our DA and that flag
-+	 * to allow us to deauth frames to that bad station.
-+	 *
-+	 * Not a regression -- we didn't do it before either.
-+	 */
-+
-+#if 0
-+	/*
-+	 * drop non-data frames, WDS frames
-+	 */
-+	/* load the lower byte of the frame control field */
-+	BPF_STMT(BPF_LD   | BPF_B | BPF_IND, 0),
-+	/* mask off QoS bit */
-+	BPF_STMT(BPF_ALU  | BPF_AND | BPF_K, 0x0c),
-+	/* drop non-data frames */
-+	BPF_JUMP(BPF_JMP  | BPF_JEQ | BPF_K, 8, 0, FAIL),
-+	/* load the upper byte of the frame control field */
-+	BPF_STMT(BPF_LD   | BPF_B | BPF_IND, 0),
-+	/* mask off toDS/fromDS */
-+	BPF_STMT(BPF_ALU  | BPF_AND | BPF_K, 0x03),
-+	/* drop WDS frames */
-+	BPF_JUMP(BPF_JMP  | BPF_JEQ | BPF_K, 3, FAIL, 0),
-+#endif
-+
-+	/*
-+	 * add header length to index
-+	 */
-+	/* load the lower byte of the frame control field */
-+	BPF_STMT(BPF_LD   | BPF_B | BPF_IND, 0),
-+	/* mask off QoS bit */
-+	BPF_STMT(BPF_ALU  | BPF_AND | BPF_K, 0x80),
-+	/* right shift it by 6 to give 0 or 2 */
-+	BPF_STMT(BPF_ALU  | BPF_RSH | BPF_K, 6),
-+	/* add data frame header length */
-+	BPF_STMT(BPF_ALU  | BPF_ADD | BPF_K, 24),
-+	/* add index, was start of 802.11 header */
-+	BPF_STMT(BPF_ALU  | BPF_ADD | BPF_X, 0),
-+	/* move to index, now start of LL header */
-+	BPF_STMT(BPF_MISC | BPF_TAX, 0),
-+
-+	/*
-+	 * Accept empty data frames, we use those for
-+	 * polling activity.
-+	 */
-+	BPF_STMT(BPF_LD  | BPF_W | BPF_LEN, 0),
-+	BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_X, 0, PASS, 0),
-+
-+	/*
-+	 * Accept EAPOL frames
-+	 */
-+	BPF_STMT(BPF_LD  | BPF_W | BPF_IND, 0),
-+	BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, 0xAAAA0300, 0, FAIL),
-+	BPF_STMT(BPF_LD  | BPF_W | BPF_IND, 4),
-+	BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, 0x0000888E, PASS, FAIL),
-+
-+	/* keep these last two statements or change the code below */
-+	/* return 0 == "DROP" */
-+	BPF_STMT(BPF_RET | BPF_K, 0),
-+	/* return ~0 == "keep all" */
-+	BPF_STMT(BPF_RET | BPF_K, ~0),
-+};
-+
-+static struct sock_fprog msock_filter = {
-+	.len = sizeof(msock_filter_insns)/sizeof(msock_filter_insns[0]),
-+	.filter = msock_filter_insns,
-+};
-+
-+
-+static int add_monitor_filter(int s)
-+{
-+	int idx;
-+
-+	/* rewrite all PASS/FAIL jump offsets */
-+	for (idx = 0; idx < msock_filter.len; idx++) {
-+		struct sock_filter *insn = &msock_filter_insns[idx];
-+
-+		if (BPF_CLASS(insn->code) == BPF_JMP) {
-+			if (insn->code == (BPF_JMP|BPF_JA)) {
-+				if (insn->k == PASS)
-+					insn->k = msock_filter.len - idx - 2;
-+				else if (insn->k == FAIL)
-+					insn->k = msock_filter.len - idx - 3;
-+			}
-+
-+			if (insn->jt == PASS)
-+				insn->jt = msock_filter.len - idx - 2;
-+			else if (insn->jt == FAIL)
-+				insn->jt = msock_filter.len - idx - 3;
-+
-+			if (insn->jf == PASS)
-+				insn->jf = msock_filter.len - idx - 2;
-+			else if (insn->jf == FAIL)
-+				insn->jf = msock_filter.len - idx - 3;
-+		}
-+	}
-+
-+	if (setsockopt(s, SOL_SOCKET, SO_ATTACH_FILTER,
-+		       &msock_filter, sizeof(msock_filter))) {
-+		perror("SO_ATTACH_FILTER");
-+		return -1;
-+	}
-+
-+	return 0;
-+}
-+
-+
- static int nl80211_create_monitor_interface(struct i802_driver_data *drv)
- {
- 	char buf[IFNAMSIZ];
-@@ -1936,6 +2084,12 @@ static int nl80211_create_monitor_interf
- 		goto error;
- 	}
- 
-+	if (add_monitor_filter(drv->monitor_sock)) {
-+		wpa_printf(MSG_INFO, "Failed to set socket filter for monitor "
-+			   "interface; do filtering in user space");
-+		/* This works, but will cost in performance. */
-+	}
-+
- 	if (bind(drv->monitor_sock, (struct sockaddr *) &ll,
- 		 sizeof(ll)) < 0) {
- 		perror("monitor socket bind");
diff --git a/package/hostapd/patches/120-countrycode.patch b/package/hostapd/patches/120-countrycode.patch
index b719544..8ffc65c 100644
--- a/package/hostapd/patches/120-countrycode.patch
+++ b/package/hostapd/patches/120-countrycode.patch
@@ -1,10 +1,14 @@
 --- a/hostapd/hostapd.c
 +++ b/hostapd/hostapd.c
-@@ -1535,7 +1535,6 @@ static int setup_interface(struct hostap
- 	    hostapd_set_ieee80211d(hapd, 1) < 0) {
- 		printf("Failed to set ieee80211d (%d)\n",
- 		       hapd->iconf->ieee80211d);
--		return -1;
+@@ -1546,10 +1546,8 @@ static int setup_interface(struct hostap
+ 	if (hapd->iconf->country[0] && hapd->iconf->country[1]) {
+ 		os_memcpy(country, hapd->iconf->country, 3);
+ 		country[3] = '\0';
+-		if (hostapd_set_country(hapd, country) < 0) {
++		if (hostapd_set_country(hapd, country) < 0)
+ 			wpa_printf(MSG_ERROR, "Failed to set country code");
+-			return -1;
+-		}
  	}
  
- 	if (hapd->iconf->bridge_packets != INTERNAL_BRIDGE_DO_NOT_CONTROL &&
+ 	if (hapd->iconf->ieee80211d &&