lantiq: drop ath9k device tree binding & ath9k pci fixup

Due to the addition of the bindings to the ath9k driver, this code
isn't used any longer. The fixup is now done by the owloader.

Rename the ath_eep.c file to ath5k_eep.c to indicate that this files
includes ath5k related code only.

Signed-off-by: Mathias Kresin <dev@kresin.me>

1 files changed, 7 insertions, 304 deletions

diff --git a/target/linux/lantiq/patches-4.4/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch b/target/linux/lantiq/patches-4.4/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
index fffd42d..73b3c3a 100644
--- a/target/linux/lantiq/patches-4.4/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
+++ b/target/linux/lantiq/patches-4.4/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
@@ -5,28 +5,15 @@ Subject: [PATCH 35/36] owrt: lantiq: wifi and ethernet eeprom handling
 
 Signed-off-by: John Crispin <blogic@openwrt.org>
 ---
- arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h  |   6 +
  .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |   3 +
  arch/mips/lantiq/xway/Makefile                     |   3 +
- arch/mips/lantiq/xway/ath_eep.c                    | 299 +++++++++++++++++++++
- arch/mips/lantiq/xway/eth_mac.c                    |  25 ++
- arch/mips/lantiq/xway/pci-ath-fixup.c              | 118 ++++++++
+ arch/mips/lantiq/xway/ath5k_eep.c                  | 136 +++++++++++++++++++++
+ arch/mips/lantiq/xway/eth_mac.c                    |  25 ++++
  drivers/net/ethernet/lantiq_etop.c                 |   6 +-
- 7 files changed, 459 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
- create mode 100644 arch/mips/lantiq/xway/ath_eep.c
+ 5 files changed, 172 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/lantiq/xway/ath5k_eep.c
  create mode 100644 arch/mips/lantiq/xway/eth_mac.c
- create mode 100644 arch/mips/lantiq/xway/pci-ath-fixup.c
 
---- /dev/null
-+++ b/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
-@@ -0,0 +1,6 @@
-+#ifndef _PCI_ATH_FIXUP
-+#define _PCI_ATH_FIXUP
-+
-+void ltq_pci_ath_fixup(unsigned slot, u16 *cal_data) __init;
-+
-+#endif /* _PCI_ATH_FIXUP */
 --- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
 +++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
 @@ -104,5 +104,8 @@ int xrx200_gphy_boot(struct device *dev,
@@ -45,12 +32,12 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  obj-y += vmmc.o tffs.o
  
 +obj-y += eth_mac.o
-+obj-$(CONFIG_PCI) += ath_eep.o pci-ath-fixup.o
++obj-$(CONFIG_PCI) += ath5k_eep.o
 +
  obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
 --- /dev/null
-+++ b/arch/mips/lantiq/xway/ath_eep.c
-@@ -0,0 +1,299 @@
++++ b/arch/mips/lantiq/xway/ath5k_eep.c
+@@ -0,0 +1,136 @@
 +/*
 + *  Copyright (C) 2011 Luca Olivetti <luca@ventoso.org>
 + *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
@@ -65,181 +52,18 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 + */
 +
 +#include <linux/init.h>
-+#include <linux/module.h>
 +#include <linux/platform_device.h>
 +#include <linux/etherdevice.h>
 +#include <linux/ath5k_platform.h>
-+#include <linux/ath9k_platform.h>
 +#include <linux/pci.h>
 +#include <linux/err.h>
 +#include <linux/mtd/mtd.h>
-+#include <pci-ath-fixup.h>
 +#include <lantiq_soc.h>
 +
 +extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev);
 +struct ath5k_platform_data ath5k_pdata;
-+struct ath9k_platform_data ath9k_pdata = {
-+	.led_pin = -1,
-+};
 +static u8 athxk_eeprom_mac[6];
 +
-+static int ath9k_pci_plat_dev_init(struct pci_dev *dev)
-+{
-+	dev->dev.platform_data = &ath9k_pdata;
-+	return 0;
-+}
-+
-+static int ath9k_eep_load;
-+int __init of_ath9k_eeprom_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node, *mtd_np = NULL;
-+	int mac_offset, led_pin;
-+	u32 mac_inc = 0, pci_slot = 0;
-+	int i;
-+	struct mtd_info *the_mtd;
-+	size_t flash_readlen;
-+	const __be32 *list;
-+	const char *part;
-+	phandle phandle;
-+	u16 dev_ids[2] = { 0 };
-+
-+	list = of_get_property(np, "ath,eep-flash", &i);
-+	if (!list || (i != (2 * sizeof(*list))))
-+		return -ENODEV;
-+
-+	phandle = be32_to_cpup(list++);
-+	if (phandle)
-+		mtd_np = of_find_node_by_phandle(phandle);
-+
-+	if (!mtd_np)
-+		return -ENODEV;
-+
-+	part = of_get_property(mtd_np, "label", NULL);
-+	if (!part)
-+		part = mtd_np->name;
-+
-+	the_mtd = get_mtd_device_nm(part);
-+	if (IS_ERR(the_mtd))
-+		return -ENODEV;
-+
-+	i = mtd_read(the_mtd, be32_to_cpup(list), ATH9K_PLAT_EEP_MAX_WORDS << 1,
-+		&flash_readlen, (void *) ath9k_pdata.eeprom_data);
-+
-+	if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
-+		size_t mac_readlen;
-+		mtd_read(the_mtd, mac_offset, 6, &mac_readlen,
-+			(void *) athxk_eeprom_mac);
-+	}
-+	put_mtd_device(the_mtd);
-+
-+	if ((sizeof(ath9k_pdata.eeprom_data) != flash_readlen) || i) {
-+		dev_err(&pdev->dev, "failed to load eeprom from mtd\n");
-+		return -ENODEV;
-+	}
-+
-+	if (of_find_property(np, "ath,eep-swap", NULL))
-+		for (i = 0; i < ATH9K_PLAT_EEP_MAX_WORDS; i++)
-+			ath9k_pdata.eeprom_data[i] = swab16(ath9k_pdata.eeprom_data[i]);
-+
-+	if (of_find_property(np, "ath,eep-endian", NULL)) {
-+		ath9k_pdata.endian_check = true;
-+
-+		dev_info(&pdev->dev, "endian check enabled.\n");
-+	}
-+
-+	if (!is_valid_ether_addr(athxk_eeprom_mac) && ltq_get_eth_mac())
-+		memcpy(athxk_eeprom_mac, ltq_get_eth_mac(), 6);
-+
-+	if (!is_valid_ether_addr(athxk_eeprom_mac)) {
-+		dev_warn(&pdev->dev, "using random mac\n");
-+		random_ether_addr(athxk_eeprom_mac);
-+	}
-+
-+	if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
-+		athxk_eeprom_mac[5] += mac_inc;
-+
-+	ath9k_pdata.macaddr = athxk_eeprom_mac;
-+	ltq_pci_plat_dev_init = ath9k_pci_plat_dev_init;
-+
-+	if (!of_property_read_u32(np, "ath,pci-slot", &pci_slot)) {
-+		ltq_pci_ath_fixup(pci_slot, ath9k_pdata.eeprom_data);
-+
-+		dev_info(&pdev->dev, "pci slot: %u\n", pci_slot);
-+                if (ath9k_eep_load) {
-+                        struct pci_dev *d = NULL;
-+                        while ((d = pci_get_device(PCI_VENDOR_ID_ATHEROS,
-+                                        PCI_ANY_ID, d)) != NULL)
-+                                pci_fixup_device(pci_fixup_early, d);
-+                }
-+
-+	}
-+
-+	if (!of_property_read_u16_array(np, "ath,device-id", dev_ids, 2)) {
-+		struct pci_dev *d = NULL;
-+
-+		while ((d = pci_get_device(PCI_VENDOR_ID_ATHEROS,
-+					   dev_ids[0], d)) != NULL)
-+		        d->device = dev_ids[1];
-+	}
-+
-+	if (!of_property_read_u32(np, "ath,led-pin", &led_pin)) {
-+		ath9k_pdata.led_pin = led_pin;
-+		dev_info(&pdev->dev, "using led pin %d.\n", led_pin);
-+	}
-+
-+	if (of_property_read_bool(np, "ath,led-active-high")) {
-+		ath9k_pdata.led_active_high = true;
-+		dev_info(&pdev->dev, "inverted LED polarity\n");
-+	}
-+
-+	if (of_property_read_bool(np, "ath,disable-2ghz")) {
-+		ath9k_pdata.disable_2ghz = true;
-+		dev_info(&pdev->dev, "disabled 2.4 GHz band\n");
-+	}
-+
-+	if (of_property_read_bool(np, "ath,disable-5ghz")) {
-+		ath9k_pdata.disable_5ghz = true;
-+		dev_info(&pdev->dev, "disabled 5 GHz band\n");
-+	}
-+
-+	dev_info(&pdev->dev, "loaded ath9k eeprom\n");
-+
-+	return 0;
-+}
-+
-+static struct of_device_id ath9k_eeprom_ids[] = {
-+	{ .compatible = "ath9k,eeprom" },
-+	{ }
-+};
-+
-+static struct platform_driver ath9k_eeprom_driver = {
-+	.driver		= {
-+		.name		= "ath9k,eeprom",
-+		.owner	= THIS_MODULE,
-+		.of_match_table	= of_match_ptr(ath9k_eeprom_ids),
-+	},
-+};
-+
-+static int __init of_ath9k_eeprom_init(void)
-+{
-+        int ret = platform_driver_probe(&ath9k_eeprom_driver, of_ath9k_eeprom_probe);
-+
-+        if (ret)
-+                ath9k_eep_load = 1;
-+
-+        return ret;
-+}
-+
-+static int __init of_ath9k_eeprom_init_late(void)
-+{
-+        if (!ath9k_eep_load)
-+                return 0;
-+        return platform_driver_probe(&ath9k_eeprom_driver, of_ath9k_eeprom_probe);
-+}
-+late_initcall(of_ath9k_eeprom_init_late);
-+subsys_initcall(of_ath9k_eeprom_init);
-+
-+
 +static int ath5k_pci_plat_dev_init(struct pci_dev *dev)
 +{
 +	dev->dev.platform_data = &ath5k_pdata;
@@ -378,127 +202,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +	return !eth_mac_set;
 +}
 +early_param("ethaddr", setup_ethaddr);
---- /dev/null
-+++ b/arch/mips/lantiq/xway/pci-ath-fixup.c
-@@ -0,0 +1,118 @@
-+/*
-+ *  Atheros AP94 reference board PCI initialization
-+ *
-+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <lantiq_soc.h>
-+
-+struct ath_fixup {
-+	u16		*cal_data;
-+	unsigned	slot;
-+};
-+
-+static int ath_num_fixups;
-+static struct ath_fixup ath_fixups[2];
-+
-+static void ath_pci_fixup(struct pci_dev *dev)
-+{
-+	void __iomem *mem;
-+	struct pci_dev *bridge = pci_upstream_bridge(dev); 
-+	u16 *cal_data = NULL;
-+	u16 cmd;
-+	u32 bar0;
-+	u32 val;
-+	u32 base;
-+	unsigned i;
-+
-+	for (i = 0; i < ath_num_fixups; i++) {
-+		if (ath_fixups[i].cal_data == NULL)
-+			continue;
-+
-+		if (ath_fixups[i].slot != PCI_SLOT(dev->devfn))
-+			continue;
-+
-+		cal_data = ath_fixups[i].cal_data;
-+		break;
-+	}
-+
-+	if (cal_data == NULL)
-+		return;
-+
-+	if (*cal_data != 0xa55a) {
-+		pr_err("pci %s: invalid calibration data\n", pci_name(dev));
-+		return;
-+	}
-+
-+	pr_info("pci %s: fixup device configuration\n", pci_name(dev));
-+
-+	base = dev->resource[0].start;
-+	mem = ioremap(base, 0x10000);
-+	if (!mem) {
-+		pr_err("pci %s: ioremap error\n", pci_name(dev));
-+		return;
-+	}
-+
-+	if (bridge) {
-+		pci_enable_device(dev);
-+	}
-+
-+	pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, base);
-+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+	cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-+	pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+	/* set pointer to first reg address */
-+	cal_data += 3;
-+	while (*cal_data != 0xffff) {
-+		u32 reg;
-+		reg = *cal_data++;
-+		val = *cal_data++;
-+		val |= (*cal_data++) << 16;
-+
-+		ltq_w32(swab32(val), mem + reg);
-+		udelay(100);
-+	}
-+
-+	pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
-+	dev->vendor = val & 0xffff;
-+	dev->device = (val >> 16) & 0xffff;
-+
-+	pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
-+	dev->revision = val & 0xff;
-+	dev->class = val >> 8; /* upper 3 bytes */
-+
-+	pr_info("pci %s: fixup info: [%04x:%04x] revision %02x class %#08x\n", 
-+		pci_name(dev), dev->vendor, dev->device, dev->revision, dev->class);
-+
-+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+	cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-+	pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
-+
-+	if (bridge) {
-+		pci_disable_device(dev);
-+	}
-+
-+	iounmap(mem);
-+}
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath_pci_fixup);
-+
-+void __init ltq_pci_ath_fixup(unsigned slot, u16 *cal_data)
-+{
-+	if (ath_num_fixups >= ARRAY_SIZE(ath_fixups))
-+		return;
-+
-+	ath_fixups[ath_num_fixups].slot = slot;
-+	ath_fixups[ath_num_fixups].cal_data = cal_data;
-+	ath_num_fixups++;
-+}
 --- a/drivers/net/ethernet/lantiq_etop.c
 +++ b/drivers/net/ethernet/lantiq_etop.c
 @@ -840,7 +840,11 @@ ltq_etop_init(struct net_device *dev)