ar71xx: Add support for Ubiquiti UniFi AP AC PRO

Add support for the Ubiquiti UniFi AP AC PRO
Signed-off-by: P.Wassi <p.wassi at gmx.at>

10 files changed, 103 insertions, 4 deletions

diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 4cf7434..449af63 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -418,6 +418,11 @@ wpj344)
 		"0@eth0" "3:lan" "2:wan"
 	;;
 
+unifiac-pro)
+	ucidef_add_switch "switch0" \
+		"0@eth0" "2:lan" "3:wan"
+	;;
+
 wpj531)
 	ucidef_set_interfaces_lan_wan "eth0" "eth1"
 	;;
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 71f5ebc..3b5e299 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -355,7 +355,8 @@ get_status_led() {
 		status_led="ubnt:green:dome"
 		;;
 	uap-pro | \
-	unifiac-lite)
+	unifiac-lite | \
+	unifiac-pro)
 		status_led="ubnt:white:dome"
 		;;
 	unifi-outdoor-plus)
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 3490129..d925a85 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -76,7 +76,8 @@ case "$FIRMWARE" in
 		ath10kcal_extract "ART" 20480 2116
 		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
 		;;
-	unifiac-lite)
+	unifiac-lite | \
+	unifiac-pro)
 		ath10kcal_extract "EEPROM" 20480 2116
 		;;
 	esac
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index d05ef54..6c2b51a 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -952,6 +952,9 @@ ar71xx_board_detect() {
 	*"UniFi-AC-LITE")
 		name="unifiac-lite"
 		;;
+	*"UniFi-AC-PRO")
+		name="unifiac-pro"
+		;;
 	*"UniFi AP Pro")
 		name="uap-pro"
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 18d9237..9b771b7 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -269,6 +269,7 @@ platform_check_image() {
 	nbg460n_550n_550nh | \
 	unifi | \
 	unifiac-lite | \
+	unifiac-pro | \
 	unifi-outdoor | \
 	carambola2 | \
 	weio )
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 622d9a7..79d2d9d 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1442,7 +1442,7 @@ config ATH79_MACH_UBNT
 	select ATH79_DEV_USB
 
 config ATH79_MACH_UBNT_UNIFIAC
-	bool "Ubiquiti UniFi AC (LITE/LR) support"
+	bool "Ubiquiti UniFi AC (LITE/LR/PRO) support"
 	select SOC_QCA956X
 	select ATH79_DEV_AP9X_PCI if PCI
 	select ATH79_DEV_ETH
@@ -1450,6 +1450,7 @@ config ATH79_MACH_UBNT_UNIFIAC
 	select ATH79_DEV_LEDS_GPIO
 	select ATH79_DEV_M25P80
 	select ATH79_DEV_WMAC
+	select ATH79_DEV_USB
 
 config ATH79_MACH_WEIO
 	bool "WeIO board"
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c
index 31cbe30..9194bc1 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c
@@ -21,6 +21,7 @@
 #include <asm/mach-ath79/ar71xx_regs.h>
 
 #include <linux/platform_data/phy-at803x.h>
+#include <linux/ar8216_platform.h>
 
 #include "common.h"
 #include "dev-ap9x-pci.h"
@@ -29,6 +30,7 @@
 #include "dev-leds-gpio.h"
 #include "dev-m25p80.h"
 #include "dev-wmac.h"
+#include "dev-usb.h"
 #include "machtypes.h"
 
 
@@ -108,3 +110,70 @@ static void __init ubnt_unifiac_lite_setup(void)
 
 MIPS_MACHINE(ATH79_MACH_UBNT_UNIFIAC_LITE, "UBNT-UF-AC-LITE", "Ubiquiti UniFi-AC-LITE",
 	     ubnt_unifiac_lite_setup);
+
+static struct ar8327_pad_cfg ubnt_unifiac_pro_ar8327_pad0_cfg = {
+	.mode = AR8327_PAD_MAC_SGMII,
+	.sgmii_delay_en = true,
+};
+
+static struct ar8327_platform_data ubnt_unifiac_pro_ar8327_data = {
+	.pad0_cfg = &ubnt_unifiac_pro_ar8327_pad0_cfg,
+	.port0_cfg = {
+		.force_link = 1,
+		.speed = AR8327_PORT_SPEED_1000,
+		.duplex = 1,
+		.txpause = 1,
+		.rxpause = 1,
+	},
+};
+
+
+static struct mdio_board_info ubnt_unifiac_pro_mdio0_info[] = {
+	{
+		.bus_id = "ag71xx-mdio.0",
+		.phy_addr = 0,
+		.platform_data = &ubnt_unifiac_pro_ar8327_data,
+	},
+};
+
+static void __init ubnt_unifiac_pro_setup(void)
+{
+	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
+
+	ath79_register_m25p80(&ubnt_unifiac_flash_data);
+
+
+	ath79_init_mac(ath79_eth0_data.mac_addr,
+	               eeprom + UNIFIAC_MAC0_OFFSET, 0);
+
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+	ath79_eth0_data.phy_mask = BIT(0);
+
+	mdiobus_register_board_info(ubnt_unifiac_pro_mdio0_info,
+	                            ARRAY_SIZE(ubnt_unifiac_pro_mdio0_info));
+
+	ath79_register_mdio(0, 0x00);
+	ath79_register_eth(0);
+
+
+	ath79_register_usb();
+
+
+	ath79_register_wmac(eeprom + UNIFIAC_WMAC_CALDATA_OFFSET, NULL);
+
+
+	ap91_pci_init(eeprom + UNIFIAC_PCI_CALDATA_OFFSET, NULL);
+
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifiac_leds_gpio),
+	                         ubnt_unifiac_leds_gpio);
+
+	ath79_register_gpio_keys_polled(-1, UNIFIAC_KEYS_POLL_INTERVAL,
+	                                ARRAY_SIZE(ubnt_unifiac_gpio_keys),
+	                                ubnt_unifiac_gpio_keys);
+}
+
+
+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFIAC_PRO, "UBNT-UF-AC-PRO", "Ubiquiti UniFi-AC-PRO",
+	     ubnt_unifiac_pro_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index d83045c..7b4f67f 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -220,6 +220,7 @@ enum ath79_mach_type {
 	ATH79_MACH_UBNT_UAP_PRO,	/* Ubiquiti UniFi AP Pro */
 	ATH79_MACH_UBNT_UNIFI, 		/* Ubiquiti Unifi */
 	ATH79_MACH_UBNT_UNIFIAC_LITE,	/* Ubiquiti Unifi AC LITE/LR */
+	ATH79_MACH_UBNT_UNIFIAC_PRO,	/* Ubiquiti Unifi AC PRO */
 	ATH79_MACH_UBNT_UNIFI_OUTDOOR,	/* Ubiquiti UnifiAP Outdoor */
 	ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, /* Ubiquiti UnifiAP Outdoor+ */
 	ATH79_MACH_UBNT_XM,		/* Ubiquiti Networks XM board rev 1.0 */
diff --git a/target/linux/ar71xx/generic/profiles/ubnt.mk b/target/linux/ar71xx/generic/profiles/ubnt.mk
index eac0240..69b8398 100644
--- a/target/linux/ar71xx/generic/profiles/ubnt.mk
+++ b/target/linux/ar71xx/generic/profiles/ubnt.mk
@@ -49,6 +49,17 @@ endef
 
 $(eval $(call Profile,UBNTUNIFIACLITE))
 
+define Profile/UBNTUNIFIACPRO
+	NAME:=Ubiquiti UniFi AP AC PRO
+	PACKAGES:=kmod-ath10k ath10k-firmware-qca988x kmod-usb-core kmod-usb-ohci kmod-usb2
+endef
+
+define Profile/UBNTUNIFIACPRO/Description
+	Package set optimized for the Ubiquiti UniFi AP AC PRO.
+endef
+
+$(eval $(call Profile,UBNTUNIFIACPRO))
+
 define Profile/UBNTUNIFIOUTDOOR
 	NAME:=Ubiquiti UniFiAP Outdoor
 	PACKAGES:=
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index dba2667..4a9378c 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -1241,12 +1241,18 @@ define Device/ubnt-unifiac-lite
   BOARDNAME := UBNT-UF-AC-LITE
 endef
 
+define Device/ubnt-unifiac-pro
+  $(Device/ubnt-unifiac)
+  DEVICE_PROFILE := UBNT UBNTUNIFIACPRO
+  BOARDNAME := UBNT-UF-AC-PRO
+endef
+
 define Device/ubnt-unifi-outdoor
   $(Device/ubnt-bz)
   BOARDNAME := UBNT-U20
   DEVICE_PROFILE := UBNT UBNTUNIFIOUTDOOR
 endef
-TARGET_DEVICES += ubnt-unifi ubnt-unifiac-lite ubnt-unifi-outdoor
+TARGET_DEVICES += ubnt-unifi ubnt-unifiac-lite ubnt-unifiac-pro ubnt-unifi-outdoor
 
 define Device/ubnt-nano-m-xw
   $(Device/ubnt-xw)