ramips: add support for D-Link DIR-615 H1

rt2x00 still needs some patching as the radio doesn't come to life.
Installation via webflash.

[juhosg: fix whitespace issues, remove rt305x_register_usb
from machine setup because the board has no USB port]

Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi>

SVN-Revision: 33205

13 files changed, 152 insertions, 4 deletions

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index b426693..6c86513 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -36,7 +36,7 @@ get_status_led() {
 	argus-atp52b)
 		status_led="argus-atp52b:green:run"
 		;;
-	dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-620-a1)
+	dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-615-h1 | dir-620-a1)
 		status_led="d-link:green:status"
 		;;
 	dap-1350)
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 392a8e1..2a40519 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -57,6 +57,7 @@ case "$FIRMWARE" in
 	all5002 | \
 	argus-atp52b | \
 	bc2 | \
+	dir-615-h1 | \
 	dir-620-a1 | \
 	esr-9753 | \
 	fonera20n | \
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/leds b/target/linux/ramips/base-files/etc/uci-defaults/leds
index 21804c7..32fae25 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/leds
@@ -32,6 +32,10 @@ case $board in
 		ucidef_set_led_default "wan" "WAN LED (amber)" "d-link:amber:wan" "1"
 		set_wifi_led "rt2800pci-phy0::radio"
 		;;
+	dir-615-h1)
+		ucidef_set_led_default "status" "Status LED (amber)" "d-link:amber:status" "0"
+		set_wifi_led "rt2800pci-phy0::radio"
+		;;
 	esr-9753)
 		set_wifi_led "rt2800pci-phy0::radio"
 		;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index cbb0b85..e7e9334 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -18,6 +18,7 @@ ramips_setup_interfaces()
 	case $board in
 	all0256n | \
 	all5002 | \
+	dir-615-h1 | \
 	wl-330n)
 		ucidef_set_interface_lan "eth0.1"
 		;;
@@ -89,7 +90,8 @@ ramips_setup_macs()
 
 	case $board in
 	all0256n | \
-	all5002)
+	all5002 | \
+	dir-615-h1)
 		lan_mac=$(ramips_get_mac_binary factory 40)
 		;;
 	3g-6200n | \
diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index a6c88ed..7709b3b 100644
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -35,7 +35,8 @@ preinit_set_mac_address() {
 		ifconfig eth0 hw ether $mac 2>/dev/null
                 ;;
 	all0256n |\
-	all5002 | \
+	all5002 |\
+	dir-615-h1 |\
 	fonera20n |\
 	hw550-3g |\
 	nbg-419n |\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 8dcda48..fb2a573 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -83,6 +83,9 @@ ramips_board_name() {
 	*"DIR-620 A1")
 		name="dir-620-a1"
 		;;
+	*"DIR-615 H1")
+		name="dir-615-h1"
+		;;
         *"DAP-1350")
                 name="dap-1350"
                 ;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 2548e1d..1b5d546 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -21,6 +21,7 @@ platform_check_image() {
 	dir-300-b1 | \
 	dir-600-b1 | \
 	dir-600-b2 | \
+	dir-615-h1 | \
 	dir-620-a1 | \
 	dap-1350 | \
 	esr-9753 | \
diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
index 2de19d7..d09bd41 100644
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
@@ -63,6 +63,7 @@ enum ramips_mach_type {
 	
 	/* RT3352 based machines */
 	RAMIPS_MACH_ALL5002,		/* Allnet ALL5002 */
+	RAMIPS_MACH_DIR_615_H1,
 
 	/* RT3662 based machines */
 	RAMIPS_MACH_RT_N56U,		/* Asus RT-N56U */
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
index 48745ae..5837196 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
@@ -16,7 +16,7 @@ config RT305X_MACH_ALL0256N
 	bool "Allnet ALL0256N support"
 	select RALINK_DEV_GPIO_BUTTONS
 	select RALINK_DEV_GPIO_LEDS
-	
+
 config RT305X_MACH_ALL5002
 	bool "Allnet ALL5002 support"
 	select RALINK_DEV_GPIO_BUTTONS
@@ -71,6 +71,11 @@ config RT305X_MACH_DIR_300_REVB
 	select RALINK_DEV_GPIO_BUTTONS
 	select RALINK_DEV_GPIO_LEDS
 
+config RT305X_MACH_DIR_615_H1
+	bool "D-Link DIR-615 H1 board support"
+	select RALINK_DEV_GPIO_BUTTONS
+	select RALINK_DEV_GPIO_LEDS
+
 config RT305X_MACH_DAP_1350
 	bool "D-Link DAP-1350 board support"
 	select RALINK_DEV_GPIO_BUTTONS
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
index e5035e2..0dcb1f9 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_RT305X_MACH_BC2)		+= mach-bc2.o
 obj-$(CONFIG_RT305X_MACH_ALL0256N)	+= mach-all0256n.o
 obj-$(CONFIG_RT305X_MACH_ALL5002)	+= mach-all5002.o
 obj-$(CONFIG_RT305X_MACH_DIR_300_REVB)	+= mach-dir-300-revb.o
+obj-$(CONFIG_RT305X_MACH_DIR_615_H1)	+= mach-dir-615-h1.o
 obj-$(CONFIG_RT305X_MACH_DAP_1350)	+= mach-dap-1350.o
 obj-$(CONFIG_RT305X_MACH_ESR_9753)	+= mach-esr-9753.o
 obj-$(CONFIG_RT305X_MACH_F5D8235_V2)    += mach-f5d8235-v2.o
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-615-h1.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-615-h1.c
new file mode 100644
index 0000000..dbfe4aa
--- /dev/null
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-615-h1.c
@@ -0,0 +1,112 @@
+/*
+ *  D-Link DIR-615 H1
+ *
+ *  Copyright (C) 2012 Mikko Hissa <mikko.hissa@uta.fi>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt305x.h>
+#include <asm/mach-ralink/rt305x_regs.h>
+
+#include "devices.h"
+
+#define DIR_615_H1_GPIO_LED_WAN_AMBER	12 /* active low */
+#define DIR_615_H1_GPIO_LED_WAN_GREEN	13 /* active low */
+#define DIR_615_H1_GPIO_LED_WPS_BLUE	14 /* active low */
+
+#define DIR_615_H1_GPIO_LED_STATUS_AMBER 7
+#define DIR_615_H1_GPIO_LED_STATUS_GREEN 9
+
+#define DIR_615_H1_GPIO_BUTTON_RESET	10 /* active low */
+#define DIR_615_H1_GPIO_BUTTON_WPS	0  /* active low */
+
+#define DIR_615_H1_KEYS_POLL_INTERVAL	20
+#define DIR_615_H1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615_H1_KEYS_POLL_INTERVAL)
+
+static struct gpio_led dir_615_h1_leds_gpio[] __initdata = {
+	{
+		.name		= "d-link:amber:status",
+		.gpio		= DIR_615_H1_GPIO_LED_STATUS_AMBER,
+	}, {
+		.name		= "d-link:green:status",
+		.gpio		= DIR_615_H1_GPIO_LED_STATUS_GREEN,
+	}, {
+		.name		= "d-link:amber:wan",
+		.gpio		= DIR_615_H1_GPIO_LED_WAN_AMBER,
+		.active_low	= 1,
+	}, {
+		.name		= "d-link:green:wan",
+		.gpio		= DIR_615_H1_GPIO_LED_WAN_GREEN,
+		.active_low	= 1,
+	}, {
+		.name		= "d-link:blue:wps",
+		.gpio		= DIR_615_H1_GPIO_LED_WPS_BLUE,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_keys_button dir_615_h1_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = DIR_615_H1_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= DIR_615_H1_GPIO_BUTTON_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.debounce_interval = DIR_615_H1_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= DIR_615_H1_GPIO_BUTTON_WPS,
+		.active_low	= 1,
+	}
+};
+
+const struct flash_platform_data dir615h1_flash = {
+	.type		= "mx25l3205d",
+};
+
+struct spi_board_info dir615h1_spi_slave_info[] __initdata = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &dir615h1_flash,
+		.irq		= -1,
+		.max_speed_hz	= 10000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+static void __init dir615h1_init(void)
+{
+	rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
+	rt305x_register_spi(dir615h1_spi_slave_info,
+			    ARRAY_SIZE(dir615h1_spi_slave_info));
+	rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
+	rt305x_register_ethernet();
+	ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_615_h1_leds_gpio),
+				  dir_615_h1_leds_gpio);
+	ramips_register_gpio_buttons(-1, DIR_615_H1_KEYS_POLL_INTERVAL,
+				     ARRAY_SIZE(dir_615_h1_gpio_buttons),
+				     dir_615_h1_gpio_buttons);
+	rt305x_register_wifi();
+	rt305x_register_wdt();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_DIR_615_H1, "DIR-615-H1", "D-Link DIR-615 H1",
+	     dir615h1_init);
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 1e17187..3441863 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -183,6 +183,17 @@ define BuildFirmware/DIR300B1/initramfs
 	$(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_dir300b1)),$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size))
 endef
 
+mtdlayout_dir615h1=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware)
+define BuildFirmware/DIR615H1
+        $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_dir615h1)),917504,2949120)
+	mkdir615h1 -e $(call sysupname,$(1),$(2)) \
+		-o $(call imgname,$(1),$(2))-factory.bin
+endef
+
+define BuildFirmware/DIR615H1/initramfs
+        $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_dir615h1)))
+endef
+
 mtdlayout_dap1350=192k(u-boot)ro,64k(devdata)ro,192k(devconf)ro,256k(devlang)ro,1088k(kernel),6400k(rootfs),7488k@0xb0000(firmware)
 mtd_dap1350_kernel_part_size=1114112
 mtd_dap1350_rootfs_part_size=6553600
@@ -380,6 +391,10 @@ define Image/Build/Profile/DIR300B1
 	$(call Image/Build/Template/$(fs_squash)/$(1),DIR620A1,dir-620-a1,DIR-620-A1)
 endef
 
+define Image/Build/Profile/DIR615H1
+        $(call Image/Build/Template/$(fs_squash)/$(1),DIR615H1,dir-615-h1,DIR-615-H1,ttyS1,57600,spi)
+endef
+
 define Image/Build/Profile/DAP1350
 	$(call Image/Build/Template/$(fs_squash)/$(1),DAP1350,dap-1350,DAP-1350,RT3052-AP-DAP1350-3)
 endef
@@ -503,6 +518,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
 	$(call Image/Build/Profile/BC2,$(1))
 	$(call Image/Build/Profile/DIR300B1,$(1))
+	$(call Image/Build/Profile/DIR615H1,$(1))
 	$(call Image/Build/Profile/DAP1350,$(1))
 	$(call Image/Build/Profile/ESR9753,$(1))
 	$(call Image/Build/Profile/F5D8235V2,$(1))
diff --git a/target/linux/ramips/rt305x/config-3.3 b/target/linux/ramips/rt305x/config-3.3
index 04afff6..409bdbb 100644
--- a/target/linux/ramips/rt305x/config-3.3
+++ b/target/linux/ramips/rt305x/config-3.3
@@ -93,6 +93,7 @@ CONFIG_RT305X_MACH_ALL5002=y
 CONFIG_RT305X_MACH_ARGUS_ATP52B=y
 CONFIG_RT305X_MACH_BC2=y
 CONFIG_RT305X_MACH_DIR_300_REVB=y
+CONFIG_RT305X_MACH_DIR_615_H1=y
 CONFIG_RT305X_MACH_DAP_1350=y
 CONFIG_RT305X_MACH_ESR_9753=y
 CONFIG_RT305X_MACH_F5D8235_V2=y