bcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCs

This was only tested on a Netgear R6250, but it could also work on
other devices when the correct images are generated.
It is only possible to boot into a ram disk, no Ethernet, Wifi, flash,
USB is supported.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37268

15 files changed, 1428 insertions, 0 deletions

diff --git a/target/linux/bcm53xx/Makefile b/target/linux/bcm53xx/Makefile
new file mode 100644
index 0000000..ea3a332
--- /dev/null
+++ b/target/linux/bcm53xx/Makefile
@@ -0,0 +1,29 @@
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+ARCH:=arm
+BOARD:=bcm53xx
+BOARDNAME:=Broadcom BCM47xx/53xx with ARM CPU
+FEATURES:=squashfs usb pci pcie gpio
+MAINTAINER:=Hauke Mehrtens <hauke@hauke-m.de>
+
+LINUX_VERSION:=3.10
+
+include $(INCLUDE_DIR)/target.mk
+
+define Target/Description
+	Build firmware images for Broadcom based BCM47xx/53xx routers with ARM CPU, *not* MIPS.
+endef
+
+CFLAGS:=-Os -pipe -mtune=cortex-a9 -march=armv7-a -mfpu=vfp -mfloat-abi=softfp
+
+KERNELNAME:="zImage dtbs"
+
+DEFAULT_PACKAGES +=
+
+$(eval $(call BuildTarget))
diff --git a/target/linux/bcm53xx/config-3.10 b/target/linux/bcm53xx/config-3.10
new file mode 100644
index 0000000..6d1017f
--- /dev/null
+++ b/target/linux/bcm53xx/config-3.10
@@ -0,0 +1,207 @@
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_ARCH_BCM is not set
+CONFIG_ARCH_BCM53XX=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_TICK_BROADCAST=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_MULTIPLATFORM=y
+# CONFIG_ARCH_MULTI_CPU_AUTO is not set
+# CONFIG_ARCH_MULTI_V6 is not set
+CONFIG_ARCH_MULTI_V6_V7=y
+CONFIG_ARCH_MULTI_V7=y
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+CONFIG_ARCH_NR_GPIO=0
+# CONFIG_ARCH_OMAP2PLUS is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SUNXI is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ARCH_VIRT is not set
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+# CONFIG_ARCH_WM8850 is not set
+CONFIG_ARM=y
+CONFIG_ARM_APPENDED_DTB=y
+# CONFIG_ARM_ATAG_DTB_COMPAT is not set
+# CONFIG_ARM_CPU_SUSPEND is not set
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_643719 is not set
+# CONFIG_ARM_ERRATA_720789 is not set
+# CONFIG_ARM_ERRATA_754322 is not set
+# CONFIG_ARM_ERRATA_754327 is not set
+# CONFIG_ARM_ERRATA_764369 is not set
+# CONFIG_ARM_ERRATA_798181 is not set
+CONFIG_ARM_GIC=y
+CONFIG_ARM_GLOBAL_TIMER=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+# CONFIG_ARM_LPAE is not set
+CONFIG_ARM_NR_BANKS=8
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_ATAGS=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_BCMA=y
+CONFIG_BCMA_BLOCKIO=y
+CONFIG_BCMA_DEBUG=y
+CONFIG_BCMA_DRIVER_GMAC_CMN=y
+CONFIG_BCMA_HOST_SOC=y
+CONFIG_BGMAC=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
+CONFIG_CLKSRC_OF=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_COMMON_CLK=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_HAS_ASID=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_BCM53XX=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_INCLUDE="debug/bcm53xx.S"
+CONFIG_DEBUG_UNCOMPRESS=y
+CONFIG_DEBUG_USER=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_FRAME_POINTER=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_ARM_SCU=y
+CONFIG_HAVE_ARM_TWD=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SMP=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_WORK=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_LOCAL_TIMERS=y
+# CONFIG_MCPM is not set
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MPCORE_WATCHDOG is not set
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_PHYSMAP_OF is not set
+CONFIG_MULTI_IRQ_HANDLER=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+# CONFIG_NET_IP_TUNNEL is not set
+CONFIG_NR_CPUS=4
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_DEVICE=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PCI_SYSCALL is not set
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RCU_STALL_COMMON=y
+# CONFIG_RCU_USER_QS is not set
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_SCHED_HRTICK=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SMP=y
+CONFIG_SMP_ON_UP=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_STOP_MACHINE=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_TEGRA_HOST1X is not set
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TREE_RCU=y
+CONFIG_UID16=y
+CONFIG_UIDGID_CONVERTED=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_XHCI is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_USE_OF=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_VFP is not set
+# CONFIG_XEN is not set
+CONFIG_XPS=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/bcm53xx/image/Makefile b/target/linux/bcm53xx/image/Makefile
new file mode 100644
index 0000000..62544c6
--- /dev/null
+++ b/target/linux/bcm53xx/image/Makefile
@@ -0,0 +1,56 @@
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+define Image/Prepare
+	rm -f $(KDIR)/fs_mark
+	echo -ne '\xde\xad\xc0\xde' > $(KDIR)/fs_mark
+	$(call prepare_generic_squashfs,$(KDIR)/fs_mark)
+endef
+
+define Image/Build/Initramfs
+	$(call Image/Build/Initramfs/Chk,bcm5301-netgear-r6250,U12H245T00_NETGEAR,2,initramfs)
+endef
+
+define Image/Build/Initramfs/Chk
+	$(call Image/Build/Initramfs/DTB,$(1))
+	$(STAGING_DIR_HOST)/bin/mkchkimg -o $(BIN_DIR)/openwrt-$(1)-$(4).chk -k $(KDIR)/$(IMG_PREFIX)-$(4)-$(1).trx -b $(2) -r $(3)
+endef
+
+define Image/Build/Initramfs/DTB
+	$(call Image/Build/DTB,zImage-initramfs,$(1))
+	$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/$(IMG_PREFIX)-initramfs-$(1).trx \
+		-f $(KDIR)/zImage-initramfs-$(1).lzma
+endef
+
+define Image/Build/squashfs/DTB
+	$(call Image/Build/DTB,zImage,$(1))
+	$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/$(IMG_PREFIX)-squashfs-$(1).trx \
+		-f $(KDIR)/zImage-$(1).lzma \
+		-a 1024 -f $(KDIR)/root.squashfs -a 0x10000 -A $(KDIR)/fs_mark
+endef
+
+define Image/Build/squashfs/Chk
+	$(call Image/Build/squashfs/DTB,$(1))
+	$(STAGING_DIR_HOST)/bin/mkchkimg -o $(BIN_DIR)/openwrt-$(1)-$(4).chk -k $(KDIR)/$(IMG_PREFIX)-$(4)-$(1).trx -b $(2) -r $(3)
+endef
+
+define Image/Build/DTB
+	rm -f $(KDIR)/$(1)-$(2).lzma
+	rm -f $(KDIR)/$(1)-$(2).dts
+	cat $(KDIR)/$(1) $(LINUX_DIR)/arch/$(ARCH)/boot/dts/$(2).dtb > $(KDIR)/$(1)-$(2).dts;
+	$(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/$(1)-$(2).dts $(KDIR)/$(1)-$(2).lzma -d16
+endef
+
+define Image/Build
+	$(call Image/Build/$(1),$(1))
+	$(call Image/Build/squashfs/Chk,bcm5301-netgear-r6250,U12H245T00_NETGEAR,2,squashfs)
+endef
+
+
+$(eval $(call BuildImage))
diff --git a/target/linux/bcm53xx/patches-3.10/0001-clocksource-arm_global_timer-Add-ARM-global-timer-su.patch b/target/linux/bcm53xx/patches-3.10/0001-clocksource-arm_global_timer-Add-ARM-global-timer-su.patch
new file mode 100644
index 0000000..90c1178
--- /dev/null
+++ b/target/linux/bcm53xx/patches-3.10/0001-clocksource-arm_global_timer-Add-ARM-global-timer-su.patch
@@ -0,0 +1,421 @@
+From 403eb25e5ae7a2169d8c1eae9df4162815e7c3ba Mon Sep 17 00:00:00 2001
+From: Stuart Menefy <stuart.menefy at>
+Date: Wed, 26 Jun 2013 11:48:38 +0000
+Subject: [PATCH 01/17] clocksource:arm_global_timer: Add ARM global timer
+ support.
+
+This is a simple driver for the global timer module found in the Cortex
+A9-MP cores from revision r1p0 onwards. This should be able to perform
+the functions of the system timer and the local timer in an SMP system.
+
+The global timer has the following features:
+    The global timer is a 64-bit incrementing counter with an
+auto-incrementing feature. It continues incrementing after sending
+interrupts. The global timer is memory mapped in the private memory
+region.
+    The global timer is accessible to all Cortex-A9 processors in the
+cluster. Each Cortex-A9 processor has a private 64-bit comparator that
+is used to assert a private interrupt when the global timer has reached
+the comparator value. All the Cortex-A9 processors in a design use the
+banked ID, ID27, for this interrupt. ID27 is sent to the Interrupt
+Controller as a Private Peripheral Interrupt. The global timer is
+clocked by PERIPHCLK.
+
+Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
+Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+CC: Arnd Bergmann <arnd@arndb.de>
+CC: Rob Herring <robherring2@gmail.com>
+CC: Linus Walleij <linus.walleij@linaro.org>
+CC: Will Deacon <will.deacon@arm.com>
+CC: Thomas Gleixner <tglx@linutronix.de>
+---
+ .../devicetree/bindings/arm/global_timer.txt       |   21 ++
+ drivers/clocksource/Kconfig                        |   13 +
+ drivers/clocksource/Makefile                       |    1 +
+ drivers/clocksource/arm_global_timer.c             |  325 ++++++++++++++++++++
+ 4 files changed, 360 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/arm/global_timer.txt
+ create mode 100644 drivers/clocksource/arm_global_timer.c
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/arm/global_timer.txt
+@@ -0,0 +1,21 @@
++
++* ARM Global Timer
++	Cortex-A9 are often associated with a per-core Global timer.
++
++** Timer node required properties:
++
++- compatible : Should be "arm,cortex-a9-global-timer"
++		Driver supports versions r2p0 and above.
++
++- interrupts : One interrupt to each core
++
++- reg : Specify the base address and the size of the GT timer
++	register window.
++
++Example:
++
++	timer@2c000600 {
++		compatible = "arm,cortex-a9-global-timer";
++		reg = <0x2c000600 0x20>;
++		interrupts = <1 13 0xf01>;
++	};
+--- a/drivers/clocksource/Kconfig
++++ b/drivers/clocksource/Kconfig
+@@ -67,6 +67,19 @@ config ARM_ARCH_TIMER
+ 	bool
+ 	select CLKSRC_OF if OF
+ 
++config ARM_GLOBAL_TIMER
++	bool
++	select CLKSRC_OF if OF
++	help
++	  This options enables support for the ARM global timer unit
++
++config CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
++	bool
++	depends on ARM_GLOBAL_TIMER
++	default y
++	help
++	 Use ARM global timer clock source as sched_clock
++
+ config CLKSRC_METAG_GENERIC
+ 	def_bool y if METAG
+ 	help
+--- a/drivers/clocksource/Makefile
++++ b/drivers/clocksource/Makefile
+@@ -28,4 +28,5 @@ obj-$(CONFIG_CLKSRC_EXYNOS_MCT)	+= exyno
+ obj-$(CONFIG_CLKSRC_SAMSUNG_PWM)	+= samsung_pwm_timer.o
+ 
+ obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o
++obj-$(CONFIG_ARM_GLOBAL_TIMER)		+= arm_global_timer.o
+ obj-$(CONFIG_CLKSRC_METAG_GENERIC)	+= metag_generic.o
+--- /dev/null
++++ b/drivers/clocksource/arm_global_timer.c
+@@ -0,0 +1,325 @@
++/*
++ * drivers/clocksource/arm_global_timer.c
++ *
++ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
++ * Author: Stuart Menefy <stuart.menefy@st.com>
++ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/clocksource.h>
++#include <linux/clockchips.h>
++#include <linux/cpu.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/of.h>
++#include <linux/of_irq.h>
++#include <linux/of_address.h>
++
++#include <asm/sched_clock.h>
++#include <asm/cputype.h>
++
++#define GT_COUNTER0	0x00
++#define GT_COUNTER1	0x04
++
++#define GT_CONTROL	0x08
++#define GT_CONTROL_TIMER_ENABLE		BIT(0)  /* this bit is NOT banked */
++#define GT_CONTROL_COMP_ENABLE		BIT(1)	/* banked */
++#define GT_CONTROL_IRQ_ENABLE		BIT(2)	/* banked */
++#define GT_CONTROL_AUTO_INC		BIT(3)	/* banked */
++
++#define GT_INT_STATUS	0x0c
++#define GT_INT_STATUS_EVENT_FLAG	BIT(0)
++
++#define GT_COMP0	0x10
++#define GT_COMP1	0x14
++#define GT_AUTO_INC	0x18
++
++/*
++ * We are expecting to be clocked by the ARM peripheral clock.
++ *
++ * Note: it is assumed we are using a prescaler value of zero, so this is
++ * the units for all operations.
++ */
++static void __iomem *gt_base;
++static unsigned long gt_clk_rate;
++static int gt_ppi;
++static struct clock_event_device __percpu *gt_evt;
++
++/*
++ * To get the value from the Global Timer Counter register proceed as follows:
++ * 1. Read the upper 32-bit timer counter register
++ * 2. Read the lower 32-bit timer counter register
++ * 3. Read the upper 32-bit timer counter register again. If the value is
++ *  different to the 32-bit upper value read previously, go back to step 2.
++ *  Otherwise the 64-bit timer counter value is correct.
++ */
++static u64 gt_counter_read(void)
++{
++	u64 counter;
++	u32 lower;
++	u32 upper, old_upper;
++
++	upper = readl_relaxed(gt_base + GT_COUNTER1);
++	do {
++		old_upper = upper;
++		lower = readl_relaxed(gt_base + GT_COUNTER0);
++		upper = readl_relaxed(gt_base + GT_COUNTER1);
++	} while (upper != old_upper);
++
++	counter = upper;
++	counter <<= 32;
++	counter |= lower;
++	return counter;
++}
++
++/**
++ * To ensure that updates to comparator value register do not set the
++ * Interrupt Status Register proceed as follows:
++ * 1. Clear the Comp Enable bit in the Timer Control Register.
++ * 2. Write the lower 32-bit Comparator Value Register.
++ * 3. Write the upper 32-bit Comparator Value Register.
++ * 4. Set the Comp Enable bit and, if necessary, the IRQ enable bit.
++ */
++static void gt_compare_set(unsigned long delta, int periodic)
++{
++	u64 counter = gt_counter_read();
++	unsigned long ctrl = readl(gt_base + GT_CONTROL);
++
++	counter += delta;
++	ctrl &=  ~(GT_CONTROL_COMP_ENABLE | GT_CONTROL_IRQ_ENABLE);
++
++	writel(ctrl, gt_base + GT_CONTROL);
++	writel(lower_32_bits(counter), gt_base + GT_COMP0);
++	writel(upper_32_bits(counter), gt_base + GT_COMP1);
++
++	if (periodic) {
++		writel(delta, gt_base + GT_AUTO_INC);
++		ctrl |= GT_CONTROL_AUTO_INC;
++	}
++
++	ctrl |= GT_CONTROL_COMP_ENABLE | GT_CONTROL_IRQ_ENABLE;
++	writel(ctrl, gt_base + GT_CONTROL);
++}
++
++static void gt_clockevent_set_mode(enum clock_event_mode mode,
++				   struct clock_event_device *clk)
++{
++	unsigned long ctrl;
++
++	switch (mode) {
++	case CLOCK_EVT_MODE_PERIODIC:
++		gt_compare_set(DIV_ROUND_CLOSEST(gt_clk_rate, HZ), 1);
++		break;
++	case CLOCK_EVT_MODE_ONESHOT:
++	case CLOCK_EVT_MODE_UNUSED:
++	case CLOCK_EVT_MODE_SHUTDOWN:
++		ctrl = readl(gt_base + GT_CONTROL);
++		ctrl &= ~(GT_CONTROL_COMP_ENABLE |
++				GT_CONTROL_IRQ_ENABLE | GT_CONTROL_AUTO_INC);
++		writel(ctrl, gt_base + GT_CONTROL);
++		break;
++	default:
++		break;
++	}
++}
++
++static int gt_clockevent_set_next_event(unsigned long evt,
++					struct clock_event_device *unused)
++{
++	gt_compare_set(evt, 0);
++	return 0;
++}
++
++static irqreturn_t gt_clockevent_interrupt(int irq, void *dev_id)
++{
++	struct clock_event_device *evt = dev_id;
++
++	if (readl_relaxed(gt_base + GT_INT_STATUS) &
++				GT_INT_STATUS_EVENT_FLAG) {
++		/**
++		 * ERRATA 740657( Global Timer can send 2 interrupts for
++		 * the same event in single-shot mode)
++		 * Workaround:
++		 *	Either disable single-shot mode.
++		 *	Or
++		 *	Modify the Interrupt Handler to avoid the
++		 *	offending sequence. This is achieved by clearing
++		 *	the Global Timer flag _after_ having incremented
++		 *	the Comparator register	value to a higher value.
++		 */
++		if (!(readl_relaxed(gt_base + GT_CONTROL) &
++						GT_CONTROL_AUTO_INC))
++			gt_compare_set(ULONG_MAX, 0);
++
++		writel_relaxed(GT_INT_STATUS_EVENT_FLAG,
++					gt_base + GT_INT_STATUS);
++
++		evt->event_handler(evt);
++		return IRQ_HANDLED;
++	}
++
++	return IRQ_NONE;
++}
++
++static int __cpuinit gt_clockevents_init(struct clock_event_device *clk)
++{
++	int cpu = smp_processor_id();
++
++	clk->name = "arm_global_timer";
++	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
++	clk->set_mode = gt_clockevent_set_mode;
++	clk->set_next_event = gt_clockevent_set_next_event;
++	clk->cpumask = cpumask_of(cpu);
++	clk->rating = 300;
++	clk->irq = gt_ppi;
++	clockevents_config_and_register(clk, gt_clk_rate,
++					1, 0xffffffff);
++	enable_percpu_irq(clk->irq, IRQ_TYPE_NONE);
++	return 0;
++}
++
++static void gt_clockevents_stop(struct clock_event_device *clk)
++{
++	gt_clockevent_set_mode(CLOCK_EVT_MODE_UNUSED, clk);
++	disable_percpu_irq(clk->irq);
++}
++
++static cycle_t gt_clocksource_read(struct clocksource *cs)
++{
++	return gt_counter_read();
++}
++
++static struct clocksource gt_clocksource = {
++	.name	= "arm_global_timer",
++	.rating	= 300,
++	.read	= gt_clocksource_read,
++	.mask	= CLOCKSOURCE_MASK(64),
++	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
++};
++
++#ifdef CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
++static u32 notrace gt_sched_clock_read(void)
++{
++	return gt_counter_read();
++}
++#endif
++
++static void __init gt_clocksource_init(void)
++{
++	writel(0, gt_base + GT_CONTROL);
++	writel(0, gt_base + GT_COUNTER0);
++	writel(0, gt_base + GT_COUNTER1);
++	/* enables timer on all the cores */
++	writel(GT_CONTROL_TIMER_ENABLE, gt_base + GT_CONTROL);
++
++#ifdef CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
++	setup_sched_clock(gt_sched_clock_read, 32, gt_clk_rate);
++#endif
++	clocksource_register_hz(&gt_clocksource, gt_clk_rate);
++}
++
++static int __cpuinit gt_cpu_notify(struct notifier_block *self,
++					   unsigned long action, void *hcpu)
++{
++	switch (action & ~CPU_TASKS_FROZEN) {
++	case CPU_STARTING:
++		gt_clockevents_init(this_cpu_ptr(gt_evt));
++		break;
++	case CPU_DYING:
++		gt_clockevents_stop(this_cpu_ptr(gt_evt));
++		break;
++	}
++
++	return NOTIFY_OK;
++}
++static struct notifier_block gt_cpu_nb __cpuinitdata = {
++	.notifier_call = gt_cpu_notify,
++};
++
++static void __init global_timer_of_register(struct device_node *np)
++{
++	struct clk *gt_clk;
++	int err = 0;
++
++	/*
++	 * In r2p0 the comparators for each processor with the global timer
++	 * fire when the timer value is greater than or equal to. In previous
++	 * revisions the comparators fired when the timer value was equal to.
++	 */
++	if ((read_cpuid_id() & 0xf0000f) < 0x200000) {
++		pr_warn("global-timer: non support for this cpu version.\n");
++		return;
++	}
++
++	gt_ppi = irq_of_parse_and_map(np, 0);
++	if (!gt_ppi) {
++		pr_warn("global-timer: unable to parse irq\n");
++		return;
++	}
++
++	gt_base = of_iomap(np, 0);
++	if (!gt_base) {
++		pr_warn("global-timer: invalid base address\n");
++		return;
++	}
++
++	gt_clk = of_clk_get(np, 0);
++	if (!IS_ERR(gt_clk)) {
++		err = clk_prepare_enable(gt_clk);
++		if (err)
++			goto out_unmap;
++	} else {
++		pr_warn("global-timer: clk not found\n");
++		err = -EINVAL;
++		goto out_unmap;
++	}
++
++	gt_clk_rate = clk_get_rate(gt_clk);
++	gt_evt = alloc_percpu(struct clock_event_device);
++	if (!gt_evt) {
++		pr_warn("global-timer: can't allocate memory\n");
++		err = -ENOMEM;
++		goto out_clk;
++	}
++
++	err = request_percpu_irq(gt_ppi, gt_clockevent_interrupt,
++				 "gt", gt_evt);
++	if (err) {
++		pr_warn("global-timer: can't register interrupt %d (%d)\n",
++			gt_ppi, err);
++		goto out_free;
++	}
++
++	err = register_cpu_notifier(&gt_cpu_nb);
++	if (err) {
++		pr_warn("global-timer: unable to register cpu notifier.\n");
++		goto out_irq;
++	}
++
++	/* Immediately configure the timer on the boot CPU */
++	gt_clocksource_init();
++	gt_clockevents_init(this_cpu_ptr(gt_evt));
++
++	return;
++
++out_irq:
++	free_percpu_irq(gt_ppi, gt_evt);
++out_free:
++	free_percpu(gt_evt);
++out_clk:
++	clk_disable_unprepare(gt_clk);
++out_unmap:
++	iounmap(gt_base);
++	WARN(err, "ARM Global timer register failed (%d)\n", err);
++}
++
++/* Only tested on r2p2 and r3p0  */
++CLOCKSOURCE_OF_DECLARE(arm_gt, "arm,cortex-a9-global-timer",
++			global_timer_of_register);
diff --git a/target/linux/bcm53xx/patches-3.10/0008-bcm53xx-initial-support-for-the-BCM5301-BCM470X-SoC-.patch b/target/linux/bcm53xx/patches-3.10/0008-bcm53xx-initial-support-for-the-BCM5301-BCM470X-SoC-.patch
new file mode 100644
index 0000000..1273f41
--- /dev/null
+++ b/target/linux/bcm53xx/patches-3.10/0008-bcm53xx-initial-support-for-the-BCM5301-BCM470X-SoC-.patch
@@ -0,0 +1,307 @@
+From 6c55b7f2fe06eb01f4ca6dad35d54c6e2ecbff25 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 29 Jun 2013 22:06:43 +0200
+Subject: [PATCH 08/17] bcm53xx: initial support for the BCM5301/BCM470X SoC
+ with ARM CPU
+
+This patch adds support for the BCM5301/BCM470X SoCs with an ARM CPU.
+Currently just booting to a shell is working and nothing else, no
+Ethernet, wifi, flash, ...
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/arm/Kconfig                            |    2 +
+ arch/arm/Kconfig.debug                      |    5 ++
+ arch/arm/Makefile                           |    1 +
+ arch/arm/boot/dts/Makefile                  |    1 +
+ arch/arm/boot/dts/bcm5301-netgear-r6250.dts |   20 +++++++
+ arch/arm/boot/dts/bcm5301.dtsi              |   83 +++++++++++++++++++++++++++
+ arch/arm/include/debug/bcm53xx.S            |   19 ++++++
+ arch/arm/mach-bcm53xx/Kconfig               |   15 +++++
+ arch/arm/mach-bcm53xx/Makefile              |    1 +
+ arch/arm/mach-bcm53xx/bcm53xx.c             |   69 ++++++++++++++++++++++
+ 10 files changed, 216 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm5301-netgear-r6250.dts
+ create mode 100644 arch/arm/boot/dts/bcm5301.dtsi
+ create mode 100644 arch/arm/include/debug/bcm53xx.S
+ create mode 100644 arch/arm/mach-bcm53xx/Kconfig
+ create mode 100644 arch/arm/mach-bcm53xx/Makefile
+ create mode 100644 arch/arm/mach-bcm53xx/bcm53xx.c
+
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -922,6 +922,8 @@ source "arch/arm/mach-bcm/Kconfig"
+ 
+ source "arch/arm/mach-bcm2835/Kconfig"
+ 
++source "arch/arm/mach-bcm53xx/Kconfig"
++
+ source "arch/arm/mach-clps711x/Kconfig"
+ 
+ source "arch/arm/mach-cns3xxx/Kconfig"
+--- a/arch/arm/Kconfig.debug
++++ b/arch/arm/Kconfig.debug
+@@ -93,6 +93,10 @@ choice
+ 		bool "Kernel low-level debugging on BCM2835 PL011 UART"
+ 		depends on ARCH_BCM2835
+ 
++	config DEBUG_BCM53XX
++		bool "Kernel low-level debugging on BCM53XX UART1"
++		depends on ARCH_BCM53XX
++
+ 	config DEBUG_CLPS711X_UART1
+ 		bool "Kernel low-level debugging messages via UART1"
+ 		depends on ARCH_CLPS711X
+@@ -620,6 +624,7 @@ endchoice
+ config DEBUG_LL_INCLUDE
+ 	string
+ 	default "debug/bcm2835.S" if DEBUG_BCM2835
++	default "debug/bcm53xx.S" if DEBUG_BCM53XX
+ 	default "debug/cns3xxx.S" if DEBUG_CNS3XXX
+ 	default "debug/exynos.S" if DEBUG_EXYNOS_UART
+ 	default "debug/highbank.S" if DEBUG_HIGHBANK_UART
+--- a/arch/arm/Makefile
++++ b/arch/arm/Makefile
+@@ -145,6 +145,7 @@ textofs-$(CONFIG_ARCH_MSM8960) := 0x0020
+ machine-$(CONFIG_ARCH_AT91)		+= at91
+ machine-$(CONFIG_ARCH_BCM)		+= bcm
+ machine-$(CONFIG_ARCH_BCM2835)		+= bcm2835
++machine-$(CONFIG_ARCH_BCM53XX)		+= bcm53xx
+ machine-$(CONFIG_ARCH_CLPS711X)		+= clps711x
+ machine-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx
+ machine-$(CONFIG_ARCH_DAVINCI)		+= davinci
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -209,6 +209,7 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07
+ 	wm8650-mid.dtb \
+ 	wm8850-w70v2.dtb
+ dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
++dtb-$(CONFIG_ARCH_BCM53XX) += bcm5301-netgear-r6250.dtb
+ 
+ targets += dtbs
+ targets += $(dtb-y)
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm5301-netgear-r6250.dts
+@@ -0,0 +1,20 @@
++/*
++ * Broadcom BCM47XX / BCM53XX arm platform code.
++ *
++ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++/dts-v1/;
++
++/include/ "bcm5301.dtsi"
++
++/ {
++	model = "Netgear R6250 V1 (BCM4708)";
++	compatible = "netgear,r6250v1", "brcm,bcm5301";
++
++	memory {
++		reg = <0x00000000 0x08000000>;
++	};
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm5301.dtsi
+@@ -0,0 +1,83 @@
++/*
++ * Broadcom BCM47XX / BCM53XX ARM platform code.
++ *
++ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++/include/ "skeleton.dtsi"
++
++/ {
++	compatible = "brcm,bcm5301";
++	model = "BCM5301/BCM4707/BCM4708/BCM4709 SoC";
++	interrupt-parent = <&gic>;
++
++	chosen {
++		bootargs = "console=ttyS0,115200 earlyprintk debug vmalloc=64M";
++	};
++
++	cpus {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		cpu@0 {
++			device_type = "cpu";
++			compatible = "arm,cortex-a9";
++			reg = <0>;
++		};
++		cpu@1 {
++			device_type = "cpu";
++			compatible = "arm,cortex-a9";
++			reg = <1>;
++		};
++	};
++
++	clocks {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		clk_periph: periph {
++			compatible = "fixed-clock";
++			#clock-cells = <0>;
++			clock-frequency = <400000000>;
++		};
++	};
++
++	uart@18000300 {
++		compatible = "ns16550";
++		reg = <0x18000300 0x100>;
++		interrupts = <0 85 4>;
++		clock-frequency = <100000000>;
++	};
++
++	uart@18000400 {
++		compatible = "ns16550";
++		reg = <0x18000400 0x100>;
++		interrupts = <0 85 4>;
++		clock-frequency = <100000000>;
++	};
++
++	gic: interrupt-controller@19021000 {
++		compatible = "arm,cortex-a9-gic";
++		#interrupt-cells = <3>;
++		#address-cells = <0>;
++		interrupt-controller;
++		reg = <0x19021000 0x1000>,
++		      <0x19020100 0x100>;
++	};
++
++	timer@19020200 {
++		compatible = "arm,cortex-a9-global-timer";
++		reg = <0x19020200 0x100>;
++		interrupts = <1 11 0xf04>;
++		clocks = <&clk_periph>;
++		#clock-cells = <0>;
++	};
++
++	local-timer@19020200 {
++		compatible = "arm,cortex-a9-twd-timer";
++		reg = <0x19020600 0x100>;
++		interrupts = <1 13 0xf04>;
++	};
++};
+--- /dev/null
++++ b/arch/arm/include/debug/bcm53xx.S
+@@ -0,0 +1,19 @@
++/*
++ * Macros used for EARLY_PRINTK, in low-level UART debug console
++ *
++ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#define BCM53XX_UART1_PHYS	0x18000300
++#define BCM53XX_UART1_VIRT	0xf1000300
++#define BCM53XX_UART1_SH	0
++
++	.macro	addruart, rp, rv, tmp
++	ldr	\rp, =BCM53XX_UART1_PHYS 	@ MMU off, Physical
++	ldr	\rv, =BCM53XX_UART1_VIRT 	@ MMU on, Virtual
++	.endm
++
++#define UART_SHIFT	BCM53XX_UART1_SH
++#include <asm/hardware/debug-8250.S>
+--- /dev/null
++++ b/arch/arm/mach-bcm53xx/Kconfig
+@@ -0,0 +1,15 @@
++config ARCH_BCM53XX
++	bool "Broadcom BCM47XX / BCM53XX ARM SoC"
++	select CPU_V7
++	select ARM_GIC
++	select HAVE_ARM_SCU if SMP
++	select HAVE_ARM_TWD if LOCAL_TIMERS
++	select HAVE_SMP
++	select HAVE_CLK
++	select LOCAL_TIMERS if SMP
++	select GENERIC_TIME
++	select GENERIC_CLOCKEVENTS_BUILD
++	select GENERIC_CLOCKEVENTS
++	select ARM_GLOBAL_TIMER
++	help
++	  Support for Broadcom BCM47XX and BCM53XX SoCs with ARM CPU cores.
+--- /dev/null
++++ b/arch/arm/mach-bcm53xx/Makefile
+@@ -0,0 +1 @@
++obj-y += bcm53xx.o
+--- /dev/null
++++ b/arch/arm/mach-bcm53xx/bcm53xx.c
+@@ -0,0 +1,69 @@
++/*
++ * Broadcom BCM47XX / BCM53XX ARM platform code.
++ *
++ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++#include <linux/of_address.h>
++#include <linux/of_platform.h>
++#include <linux/irqchip.h>
++#include <linux/clocksource.h>
++#include <linux/clk-provider.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/smp_scu.h>
++#include <asm/signal.h>
++
++static int bcm53xx_abort_handler(unsigned long addr, unsigned int fsr,
++				 struct pt_regs *regs)
++{
++	/*
++	 * These happen for no good reason
++	 * possibly left over from CFE
++	 */
++	pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
++		addr, fsr);
++
++	/* Returning non-zero causes fault display and panic */
++	return 0;
++}
++
++static void bcm53xx_aborts_enable(void)
++{
++	/* Install our hook */
++	hook_fault_code(16 + 6, bcm53xx_abort_handler, SIGBUS, 0,
++			"imprecise external abort");
++}
++
++static void __init bcm53xx_timer_init(void)
++{
++	of_clk_init(NULL);
++	clocksource_of_init();
++}
++
++void __init bcm53xx_map_io(void)
++{
++	debug_ll_io_init();
++	bcm53xx_aborts_enable();
++}
++
++static void __init bcm53xx_dt_init(void)
++{
++	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
++}
++
++static const char const *bcm53xx_dt_compat[] = {
++	"brcm,bcm5301",
++	"netgear,r6250v1",
++	NULL,
++};
++
++DT_MACHINE_START(BCM53XX, "BCM53XX")
++	.init_machine = bcm53xx_dt_init,
++	.map_io = bcm53xx_map_io,
++	.init_irq = irqchip_init,
++	.init_time = bcm53xx_timer_init,
++	.dt_compat = bcm53xx_dt_compat,
++MACHINE_END
diff --git a/target/linux/bcm53xx/patches-3.10/0009-bcma-register-bcma-as-device-tree-driver.patch b/target/linux/bcm53xx/patches-3.10/0009-bcma-register-bcma-as-device-tree-driver.patch
new file mode 100644
index 0000000..ede3af5
--- /dev/null
+++ b/target/linux/bcm53xx/patches-3.10/0009-bcma-register-bcma-as-device-tree-driver.patch
@@ -0,0 +1,99 @@
+From d16de2a4ffeaf62fb3d838365a29b80f330bffe0 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Thu, 4 Jul 2013 22:26:58 +0200
+Subject: [PATCH 09/17] bcma: register bcma as device tree driver
+
+This driver is used by the bcm53xx ARM SoC code.Now it is possible to
+give the address of the chipcommon core in device tree.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/host_soc.c |   73 +++++++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 73 insertions(+)
+
+--- a/drivers/bcma/host_soc.c
++++ b/drivers/bcma/host_soc.c
+@@ -7,6 +7,9 @@
+ 
+ #include "bcma_private.h"
+ #include "scan.h"
++#include <linux/slab.h>
++#include <linux/module.h>
++#include <linux/of_address.h>
+ #include <linux/bcma/bcma.h>
+ #include <linux/bcma/bcma_soc.h>
+ 
+@@ -181,3 +184,73 @@ int __init bcma_host_soc_register(struct
+ 
+ 	return err;
+ }
++
++#ifdef CONFIG_OF
++static int bcma_host_soc_probe(struct platform_device *pdev)
++{
++	struct device *dev = &pdev->dev;
++	struct device_node *np = dev->of_node;
++	struct bcma_bus *bus;
++	int err;
++
++	/* Alloc */
++	bus = kzalloc(sizeof(*bus), GFP_KERNEL);
++	if (!bus)
++		return -ENOMEM;
++
++	/* Map MMIO */
++	err = -ENOMEM;
++	bus->mmio = of_iomap(np, 0);
++	if (!bus->mmio)
++		goto err_kfree_bus;
++
++	/* Host specific */
++	bus->hosttype = BCMA_HOSTTYPE_SOC;
++	bus->ops = &bcma_host_soc_ops;
++
++
++	/* Register */
++	err = bcma_bus_register(bus);
++	if (err)
++		goto err_unmap_mmio;
++
++	platform_set_drvdata(pdev, bus);
++
++	return err;
++
++err_unmap_mmio:
++	iounmap(bus->mmio);
++err_kfree_bus:
++	kfree(bus);
++	return err;
++}
++
++static int bcma_host_soc_remove(struct platform_device *pdev)
++{
++	struct bcma_bus *bus = platform_get_drvdata(pdev);
++
++	bcma_bus_unregister(bus);
++	iounmap(bus->mmio);
++	kfree(bus);
++	platform_set_drvdata(pdev, NULL);
++
++	return 0;
++}
++
++static const struct of_device_id bcma_host_soc_of_match[] = {
++	{ .compatible = "brcm,bus-aix", },
++	{},
++};
++MODULE_DEVICE_TABLE(of, bcma_host_soc_of_match);
++
++static struct platform_driver bcma_host_soc_driver = {
++	.driver = {
++		.name = "bcma-host-soc",
++		.owner = THIS_MODULE,
++		.of_match_table = bcma_host_soc_of_match,
++	},
++	.probe		= bcma_host_soc_probe,
++	.remove		= bcma_host_soc_remove,
++};
++module_platform_driver(bcma_host_soc_driver);
++#endif /* CONFIG_OF */
diff --git a/target/linux/bcm53xx/patches-3.10/0010-bcma-add-some-more-core-names.patch b/target/linux/bcm53xx/patches-3.10/0010-bcma-add-some-more-core-names.patch
new file mode 100644
index 0000000..aaedd59
--- /dev/null
+++ b/target/linux/bcm53xx/patches-3.10/0010-bcma-add-some-more-core-names.patch
@@ -0,0 +1,57 @@
+From 6fe4f63b017c3c0a7caa73d01fab23874ca0ed97 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Thu, 4 Jul 2013 22:29:48 +0200
+Subject: [PATCH 10/17] bcma: add some more core names
+
+These cores were found on a BCM4708 (chipid 53010), this is a ARM SoC
+with two Cortex A9 cores.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/scan.c       |   12 ++++++++++++
+ include/linux/bcma/bcma.h |   12 ++++++++++++
+ 2 files changed, 24 insertions(+)
+
+--- a/drivers/bcma/scan.c
++++ b/drivers/bcma/scan.c
+@@ -32,6 +32,18 @@ static const struct bcma_device_id_name
+ 	{ BCMA_CORE_4706_CHIPCOMMON, "BCM4706 ChipCommon" },
+ 	{ BCMA_CORE_4706_SOC_RAM, "BCM4706 SOC RAM" },
+ 	{ BCMA_CORE_4706_MAC_GBIT, "BCM4706 GBit MAC" },
++	{ BCMA_CORE_PCIEG2, "PCIe Gen 2" },
++	{ BCMA_CORE_DMA, "DMA" },
++	{ BCMA_CORE_SDIO3, "SDIO3" },
++	{ BCMA_CORE_USB20, "USB 2.0" },
++	{ BCMA_CORE_USB30, "USB 3.0" },
++	{ BCMA_CORE_A9JTAG, "ARM Cortex A9 JTAG" },
++	{ BCMA_CORE_DDR23, "Denali DDR2/DDR3 memory controller" },
++	{ BCMA_CORE_ROM, "ROM" },
++	{ BCMA_CORE_NAND, "NAND flash controller" },
++	{ BCMA_CORE_QSPI, "SPI flash controller" },
++	{ BCMA_CORE_CHIPCOMMON_B, "Chipcommon B" },
++	{ BCMA_CORE_ARMCA9, "ARM Cortex A9 core (ihost)" },
+ 	{ BCMA_CORE_AMEMC, "AMEMC (DDR)" },
+ 	{ BCMA_CORE_ALTA, "ALTA (I2S)" },
+ 	{ BCMA_CORE_INVALID, "Invalid" },
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -72,7 +72,19 @@ struct bcma_host_ops {
+ /* Core-ID values. */
+ #define BCMA_CORE_OOB_ROUTER		0x367	/* Out of band */
+ #define BCMA_CORE_4706_CHIPCOMMON	0x500
++#define BCMA_CORE_PCIEG2		0x501
++#define BCMA_CORE_DMA			0x502
++#define BCMA_CORE_SDIO3			0x503
++#define BCMA_CORE_USB20			0x504
++#define BCMA_CORE_USB30			0x505
++#define BCMA_CORE_A9JTAG		0x506
++#define BCMA_CORE_DDR23			0x507
++#define BCMA_CORE_ROM			0x508
++#define BCMA_CORE_NAND			0x509
++#define BCMA_CORE_QSPI			0x50A
++#define BCMA_CORE_CHIPCOMMON_B		0x50B		/* ChipcommonB core */
+ #define BCMA_CORE_4706_SOC_RAM		0x50E
++#define BCMA_CORE_ARMCA9		0x510
+ #define BCMA_CORE_4706_MAC_GBIT		0x52D
+ #define BCMA_CORE_AMEMC			0x52E	/* DDR1/2 memory controller core */
+ #define BCMA_CORE_ALTA			0x534	/* I2S core */
diff --git a/target/linux/bcm53xx/patches-3.10/0011-bcma-make-it-possible-to-select-SoC-support-without-.patch b/target/linux/bcm53xx/patches-3.10/0011-bcma-make-it-possible-to-select-SoC-support-without-.patch
new file mode 100644
index 0000000..0875734
--- /dev/null
+++ b/target/linux/bcm53xx/patches-3.10/0011-bcma-make-it-possible-to-select-SoC-support-without-.patch
@@ -0,0 +1,33 @@
+From b5f4430c100a4d7b526426db46b76add728f45d4 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Thu, 4 Jul 2013 22:35:22 +0200
+Subject: [PATCH 11/17] bcma: make it possible to select SoC support without
+ mips
+
+To make it possible to use the SoC host interface with ARM SoCs do not
+depend on the MIPS driver any more.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/Kconfig |   10 ++++++++--
+ 1 file changed, 8 insertions(+), 2 deletions(-)
+
+--- a/drivers/bcma/Kconfig
++++ b/drivers/bcma/Kconfig
+@@ -35,8 +35,14 @@ config BCMA_DRIVER_PCI_HOSTMODE
+ 	  PCI core hostmode operation (external PCI bus).
+ 
+ config BCMA_HOST_SOC
+-	bool
+-	depends on BCMA_DRIVER_MIPS
++	bool "Support for BCMA in a SoC"
++	depends on BCMA
++	help
++	  Host interface for a Broadcom AIX bus directly mapped into 
++	  the memory. This only works with the Broadcom SoCs from the
++	  BCM47XX line.
++
++	  If unsure, say N
+ 
+ config BCMA_DRIVER_MIPS
+ 	bool "BCMA Broadcom MIPS core driver"
diff --git a/target/linux/bcm53xx/patches-3.10/0012-bcm53xx-register-bcma-bus.patch b/target/linux/bcm53xx/patches-3.10/0012-bcm53xx-register-bcma-bus.patch
new file mode 100644
index 0000000..5e18b87
--- /dev/null
+++ b/target/linux/bcm53xx/patches-3.10/0012-bcm53xx-register-bcma-bus.patch
@@ -0,0 +1,24 @@
+From 5b9be5e1e3c368466e482c7dbb2cf6b890614b39 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Thu, 4 Jul 2013 22:37:13 +0200
+Subject: [PATCH 12/17] bcm53xx: register bcma bus
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/arm/boot/dts/bcm5301.dtsi |    5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm5301.dtsi
++++ b/arch/arm/boot/dts/bcm5301.dtsi
+@@ -67,6 +67,11 @@
+ 		      <0x19020100 0x100>;
+ 	};
+ 
++	bus@18000000 {
++		compatible = "brcm,bus-aix";
++		reg = <0x18000000 0x1000>;
++	};
++
+ 	timer@19020200 {
+ 		compatible = "arm,cortex-a9-global-timer";
+ 		reg = <0x19020200 0x100>;
diff --git a/target/linux/bcm53xx/patches-3.10/0013-bcma-add-constants-for-new-ARM-based-SoCs.patch b/target/linux/bcm53xx/patches-3.10/0013-bcma-add-constants-for-new-ARM-based-SoCs.patch
new file mode 100644
index 0000000..10c1c40
--- /dev/null
+++ b/target/linux/bcm53xx/patches-3.10/0013-bcma-add-constants-for-new-ARM-based-SoCs.patch
@@ -0,0 +1,26 @@
+From fda36440e95ef9adbd7955b069248d1d807a85b1 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Thu, 4 Jul 2013 22:48:25 +0200
+Subject: [PATCH 13/17] bcma: add constants for new ARM based SoCs
+
+These are the chipIDs of some ARM based SoCs from the BCM47xx line.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ include/linux/bcma/bcma.h |    5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -188,6 +188,11 @@ struct bcma_host_ops {
+ #define  BCMA_PKG_ID_BCM5357	11
+ #define BCMA_CHIP_ID_BCM53572	53572
+ #define  BCMA_PKG_ID_BCM47188	9
++#define BCMA_CHIP_ID_BCM4707	53010
++#define  BCMA_PKG_ID_BCM4707	1
++#define  BCMA_PKG_ID_BCM4708	2
++#define  BCMA_PKG_ID_BCM4709	0
++#define BCMA_CHIP_ID_BCM53018	53018
+ 
+ /* Board types (on PCI usually equals to the subsystem dev id) */
+ /* BCM4313 */
diff --git a/target/linux/bcm53xx/patches-3.10/0014-bcma-return-correct-error-code-when-bus-can-failed.patch b/target/linux/bcm53xx/patches-3.10/0014-bcma-return-correct-error-code-when-bus-can-failed.patch
new file mode 100644
index 0000000..04af9d4
--- /dev/null
+++ b/target/linux/bcm53xx/patches-3.10/0014-bcma-return-correct-error-code-when-bus-can-failed.patch
@@ -0,0 +1,21 @@
+From e2e1b185afd86a047e1f2db405c61ae4e43c0f29 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Thu, 4 Jul 2013 22:49:14 +0200
+Subject: [PATCH 14/17] bcma: return correct error code when bus can failed
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/main.c |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/bcma/main.c
++++ b/drivers/bcma/main.c
+@@ -218,7 +218,7 @@ int bcma_bus_register(struct bcma_bus *b
+ 	err = bcma_bus_scan(bus);
+ 	if (err) {
+ 		bcma_err(bus, "Failed to scan: %d\n", err);
+-		return -1;
++		return err;
+ 	}
+ 
+ 	/* Early init CC core */
diff --git a/target/linux/bcm53xx/patches-3.10/0015-bcma-fix-handling-of-big-addrl.patch b/target/linux/bcm53xx/patches-3.10/0015-bcma-fix-handling-of-big-addrl.patch
new file mode 100644
index 0000000..6a76f5d
--- /dev/null
+++ b/target/linux/bcm53xx/patches-3.10/0015-bcma-fix-handling-of-big-addrl.patch
@@ -0,0 +1,83 @@
+From 8204277ed0f4aeb7bb38d0d5f39d9ebcced92576 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Fri, 5 Jul 2013 00:24:38 +0200
+Subject: [PATCH 15/17] bcma: fix handling of big addrl
+
+The return value of bcma_erom_get_addr_desc() is a unsigned value and it
+could wrap around in the two complement writing.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/scan.c |   16 ++++++++--------
+ 1 file changed, 8 insertions(+), 8 deletions(-)
+
+--- a/drivers/bcma/scan.c
++++ b/drivers/bcma/scan.c
+@@ -213,7 +213,7 @@ static s32 bcma_erom_get_mst_port(struct
+ 	return ent;
+ }
+ 
+-static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr,
++static u32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr,
+ 				  u32 type, u8 port)
+ {
+ 	u32 addrl, addrh, sizel, sizeh = 0;
+@@ -225,7 +225,7 @@ static s32 bcma_erom_get_addr_desc(struc
+ 	    ((ent & SCAN_ADDR_TYPE) != type) ||
+ 	    (((ent & SCAN_ADDR_PORT) >> SCAN_ADDR_PORT_SHIFT) != port)) {
+ 		bcma_erom_push_ent(eromptr);
+-		return -EINVAL;
++		return (u32)-EINVAL;
+ 	}
+ 
+ 	addrl = ent & SCAN_ADDR_ADDR;
+@@ -273,7 +273,7 @@ static int bcma_get_next_core(struct bcm
+ 			      struct bcma_device_id *match, int core_num,
+ 			      struct bcma_device *core)
+ {
+-	s32 tmp;
++	u32 tmp;
+ 	u8 i, j;
+ 	s32 cia, cib;
+ 	u8 ports[2], wrappers[2];
+@@ -351,11 +351,11 @@ static int bcma_get_next_core(struct bcm
+ 	 * the main register space for the core
+ 	 */
+ 	tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0);
+-	if (tmp <= 0) {
++	if (tmp == 0 || IS_ERR_VALUE(tmp)) {
+ 		/* Try again to see if it is a bridge */
+ 		tmp = bcma_erom_get_addr_desc(bus, eromptr,
+ 					      SCAN_ADDR_TYPE_BRIDGE, 0);
+-		if (tmp <= 0) {
++		if (tmp == 0 || IS_ERR_VALUE(tmp)) {
+ 			return -EILSEQ;
+ 		} else {
+ 			bcma_info(bus, "Bridge found\n");
+@@ -369,7 +369,7 @@ static int bcma_get_next_core(struct bcm
+ 		for (j = 0; ; j++) {
+ 			tmp = bcma_erom_get_addr_desc(bus, eromptr,
+ 				SCAN_ADDR_TYPE_SLAVE, i);
+-			if (tmp < 0) {
++			if (IS_ERR_VALUE(tmp)) {
+ 				/* no more entries for port _i_ */
+ 				/* pr_debug("erom: slave port %d "
+ 				 * "has %d descriptors\n", i, j); */
+@@ -386,7 +386,7 @@ static int bcma_get_next_core(struct bcm
+ 		for (j = 0; ; j++) {
+ 			tmp = bcma_erom_get_addr_desc(bus, eromptr,
+ 				SCAN_ADDR_TYPE_MWRAP, i);
+-			if (tmp < 0) {
++			if (IS_ERR_VALUE(tmp)) {
+ 				/* no more entries for port _i_ */
+ 				/* pr_debug("erom: master wrapper %d "
+ 				 * "has %d descriptors\n", i, j); */
+@@ -404,7 +404,7 @@ static int bcma_get_next_core(struct bcm
+ 		for (j = 0; ; j++) {
+ 			tmp = bcma_erom_get_addr_desc(bus, eromptr,
+ 				SCAN_ADDR_TYPE_SWRAP, i + hack);
+-			if (tmp < 0) {
++			if (IS_ERR_VALUE(tmp)) {
+ 				/* no more entries for port _i_ */
+ 				/* pr_debug("erom: master wrapper %d "
+ 				 * has %d descriptors\n", i, j); */
diff --git a/target/linux/bcm53xx/patches-3.10/0016-bgmac-bgmac-depends-on-phylib.patch b/target/linux/bcm53xx/patches-3.10/0016-bgmac-bgmac-depends-on-phylib.patch
new file mode 100644
index 0000000..5c79720
--- /dev/null
+++ b/target/linux/bcm53xx/patches-3.10/0016-bgmac-bgmac-depends-on-phylib.patch
@@ -0,0 +1,22 @@
+From 0cf467765b64f6dc60f95c890cdb1641ae1d9390 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Wed, 10 Jul 2013 17:54:33 +0200
+Subject: [PATCH 16/17] bgmac: bgmac depends on phylib
+
+bgmac is using functions from phylib, add the dependency.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/net/ethernet/broadcom/Kconfig |    1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/net/ethernet/broadcom/Kconfig
++++ b/drivers/net/ethernet/broadcom/Kconfig
+@@ -133,6 +133,7 @@ config BNX2X_SRIOV
+ config BGMAC
+ 	tristate "BCMA bus GBit core support"
+ 	depends on BCMA_HOST_SOC && HAS_DMA
++	select PHYLIB
+ 	---help---
+ 	  This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
+ 	  They can be found on BCM47xx SoCs and provide gigabit ethernet.
diff --git a/target/linux/bcm53xx/patches-3.10/0017-bgmac-make-bgmac-work-on-systems-without-nvram.patch b/target/linux/bcm53xx/patches-3.10/0017-bgmac-make-bgmac-work-on-systems-without-nvram.patch
new file mode 100644
index 0000000..33ff0ef
--- /dev/null
+++ b/target/linux/bcm53xx/patches-3.10/0017-bgmac-make-bgmac-work-on-systems-without-nvram.patch
@@ -0,0 +1,25 @@
+From a0c7d2569ed39b8b0d90a431d80babc0f5f1f864 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Wed, 10 Jul 2013 17:55:34 +0200
+Subject: [PATCH 17/17] bgmac: make bgmac work on systems without nvram
+
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/net/ethernet/broadcom/bgmac.c |    4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/drivers/net/ethernet/broadcom/bgmac.c
++++ b/drivers/net/ethernet/broadcom/bgmac.c
+@@ -16,7 +16,11 @@
+ #include <linux/phy.h>
+ #include <linux/interrupt.h>
+ #include <linux/dma-mapping.h>
++#ifdef CONFIG_BCM47XX
+ #include <bcm47xx_nvram.h>
++#else
++#define bcm47xx_nvram_getenv(a, b, c) -1
++#endif
+ 
+ static const struct bcma_device_id bgmac_bcma_tbl[] = {
+ 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS),
diff --git a/target/linux/bcm53xx/profiles/100-Generic.mk b/target/linux/bcm53xx/profiles/100-Generic.mk
new file mode 100644
index 0000000..5e6d1ce
--- /dev/null
+++ b/target/linux/bcm53xx/profiles/100-Generic.mk
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Generic
+  NAME:=Broadcom SoC, BCM43xx WiFi (b43, default)
+endef
+
+define Profile/Generic/Description
+	Package set compatible with hardware any Broadcom BCM47xx or BCM535x 
+	SoC with a ARM CPU like the BCM4707, BCM4708, BCM4709, BCM53010
+endef
+
+$(eval $(call Profile,Generic))
+