bcm53xx: remove linux 3.14 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44946

42 files changed, 0 insertions, 9149 deletions

diff --git a/target/linux/bcm53xx/config-3.14 b/target/linux/bcm53xx/config-3.14
deleted file mode 100644
index e28c6a2..0000000
--- a/target/linux/bcm53xx/config-3.14
+++ /dev/null
@@ -1,276 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_BCM=y
-CONFIG_ARCH_BCM_5301X=y
-# CONFIG_ARCH_BCM_MOBILE is not set
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=0
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARM=y
-CONFIG_ARM_APPENDED_DTB=y
-# CONFIG_ARM_ATAG_DTB_COMPAT is not set
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GLOBAL_TIMER=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_NR_BANKS=8
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_B53=y
-# CONFIG_B53_MMAP_DRIVER is not set
-# CONFIG_B53_PHY_DRIVER is not set
-CONFIG_B53_SRAB_DRIVER=y
-CONFIG_BCM47XX_NVRAM=y
-CONFIG_BCM47XX_SPROM=y
-CONFIG_BCMA=y
-CONFIG_BCMA_BLOCKIO=y
-CONFIG_BCMA_DEBUG=y
-CONFIG_BCMA_DRIVER_GMAC_CMN=y
-CONFIG_BCMA_DRIVER_GPIO=y
-CONFIG_BCMA_HOST_PCI=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-CONFIG_BCMA_HOST_SOC=y
-# CONFIG_BCM_KONA_WDT is not set
-CONFIG_BGMAC=y
-CONFIG_BOUNCE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CACHE_PL310=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_XZ=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BCM_5301X=y
-# CONFIG_DEBUG_BCM_KONA_UART is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-# CONFIG_DEBUG_LL_UART_8250 is not set
-# CONFIG_DEBUG_LL_UART_PL01X is not set
-CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
-CONFIG_DEBUG_UART_8250_SHIFT=0
-CONFIG_DEBUG_UART_PHYS=0x18000300
-# CONFIG_DEBUG_UART_PL01X is not set
-CONFIG_DEBUG_UART_VIRT=0xf1000300
-CONFIG_DEBUG_UNCOMPRESS=y
-CONFIG_DEBUG_USER=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_74X164=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_KTIME_SCALAR=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_BCM47XX_PARTS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_BCM=y
-CONFIG_MTD_NAND_ECC=y
-# CONFIG_MTD_PHYSMAP_OF is not set
-# CONFIG_MTD_SM_COMMON is not set
-CONFIG_MTD_SPI_BCM53XXSPIFLASH=y
-CONFIG_MTD_SPI_NOR=y
-# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_CPUS=4
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCI_BCM5301X=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-# CONFIG_PL310_ERRATA_753970 is not set
-# CONFIG_PL310_ERRATA_769419 is not set
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SECCOMP is not set
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BCM53XX=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SWCONFIG=y
-CONFIG_SWIOTLB=y
-# CONFIG_SWP_EMULATE is not set
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TREE_RCU=y
-CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_XZ=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UID16=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-# CONFIG_VFP is not set
-# CONFIG_XEN is not set
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/bcm53xx/patches-3.14/001-mtd-spi-nor.patch b/target/linux/bcm53xx/patches-3.14/001-mtd-spi-nor.patch
deleted file mode 100644
index 8b6ed43..0000000
--- a/target/linux/bcm53xx/patches-3.14/001-mtd-spi-nor.patch
+++ /dev/null
@@ -1,2443 +0,0 @@
-This patches adds the SPI-NOR device support code form kernel 3.17-rc1.
-This patch does not contain any further code not in this mainline kernel.
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -366,6 +366,8 @@ source "drivers/mtd/onenand/Kconfig"
- 
- source "drivers/mtd/lpddr/Kconfig"
- 
-+source "drivers/mtd/spi-nor/Kconfig"
-+
- source "drivers/mtd/ubi/Kconfig"
- 
- endif # MTD
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -35,4 +35,5 @@ inftl-objs		:= inftlcore.o inftlmount.o
- 
- obj-y		+= chips/ lpddr/ maps/ devices/ nand/ onenand/ tests/
- 
-+obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor/
- obj-$(CONFIG_MTD_UBI)		+= ubi/
---- /dev/null
-+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
-@@ -0,0 +1,1009 @@
-+/*
-+ * Freescale QuadSPI driver.
-+ *
-+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/interrupt.h>
-+#include <linux/errno.h>
-+#include <linux/platform_device.h>
-+#include <linux/sched.h>
-+#include <linux/delay.h>
-+#include <linux/io.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/timer.h>
-+#include <linux/jiffies.h>
-+#include <linux/completion.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mtd/spi-nor.h>
-+
-+/* The registers */
-+#define QUADSPI_MCR			0x00
-+#define QUADSPI_MCR_RESERVED_SHIFT	16
-+#define QUADSPI_MCR_RESERVED_MASK	(0xF << QUADSPI_MCR_RESERVED_SHIFT)
-+#define QUADSPI_MCR_MDIS_SHIFT		14
-+#define QUADSPI_MCR_MDIS_MASK		(1 << QUADSPI_MCR_MDIS_SHIFT)
-+#define QUADSPI_MCR_CLR_TXF_SHIFT	11
-+#define QUADSPI_MCR_CLR_TXF_MASK	(1 << QUADSPI_MCR_CLR_TXF_SHIFT)
-+#define QUADSPI_MCR_CLR_RXF_SHIFT	10
-+#define QUADSPI_MCR_CLR_RXF_MASK	(1 << QUADSPI_MCR_CLR_RXF_SHIFT)
-+#define QUADSPI_MCR_DDR_EN_SHIFT	7
-+#define QUADSPI_MCR_DDR_EN_MASK		(1 << QUADSPI_MCR_DDR_EN_SHIFT)
-+#define QUADSPI_MCR_END_CFG_SHIFT	2
-+#define QUADSPI_MCR_END_CFG_MASK	(3 << QUADSPI_MCR_END_CFG_SHIFT)
-+#define QUADSPI_MCR_SWRSTHD_SHIFT	1
-+#define QUADSPI_MCR_SWRSTHD_MASK	(1 << QUADSPI_MCR_SWRSTHD_SHIFT)
-+#define QUADSPI_MCR_SWRSTSD_SHIFT	0
-+#define QUADSPI_MCR_SWRSTSD_MASK	(1 << QUADSPI_MCR_SWRSTSD_SHIFT)
-+
-+#define QUADSPI_IPCR			0x08
-+#define QUADSPI_IPCR_SEQID_SHIFT	24
-+#define QUADSPI_IPCR_SEQID_MASK		(0xF << QUADSPI_IPCR_SEQID_SHIFT)
-+
-+#define QUADSPI_BUF0CR			0x10
-+#define QUADSPI_BUF1CR			0x14
-+#define QUADSPI_BUF2CR			0x18
-+#define QUADSPI_BUFXCR_INVALID_MSTRID	0xe
-+
-+#define QUADSPI_BUF3CR			0x1c
-+#define QUADSPI_BUF3CR_ALLMST_SHIFT	31
-+#define QUADSPI_BUF3CR_ALLMST		(1 << QUADSPI_BUF3CR_ALLMST_SHIFT)
-+
-+#define QUADSPI_BFGENCR			0x20
-+#define QUADSPI_BFGENCR_PAR_EN_SHIFT	16
-+#define QUADSPI_BFGENCR_PAR_EN_MASK	(1 << (QUADSPI_BFGENCR_PAR_EN_SHIFT))
-+#define QUADSPI_BFGENCR_SEQID_SHIFT	12
-+#define QUADSPI_BFGENCR_SEQID_MASK	(0xF << QUADSPI_BFGENCR_SEQID_SHIFT)
-+
-+#define QUADSPI_BUF0IND			0x30
-+#define QUADSPI_BUF1IND			0x34
-+#define QUADSPI_BUF2IND			0x38
-+#define QUADSPI_SFAR			0x100
-+
-+#define QUADSPI_SMPR			0x108
-+#define QUADSPI_SMPR_DDRSMP_SHIFT	16
-+#define QUADSPI_SMPR_DDRSMP_MASK	(7 << QUADSPI_SMPR_DDRSMP_SHIFT)
-+#define QUADSPI_SMPR_FSDLY_SHIFT	6
-+#define QUADSPI_SMPR_FSDLY_MASK		(1 << QUADSPI_SMPR_FSDLY_SHIFT)
-+#define QUADSPI_SMPR_FSPHS_SHIFT	5
-+#define QUADSPI_SMPR_FSPHS_MASK		(1 << QUADSPI_SMPR_FSPHS_SHIFT)
-+#define QUADSPI_SMPR_HSENA_SHIFT	0
-+#define QUADSPI_SMPR_HSENA_MASK		(1 << QUADSPI_SMPR_HSENA_SHIFT)
-+
-+#define QUADSPI_RBSR			0x10c
-+#define QUADSPI_RBSR_RDBFL_SHIFT	8
-+#define QUADSPI_RBSR_RDBFL_MASK		(0x3F << QUADSPI_RBSR_RDBFL_SHIFT)
-+
-+#define QUADSPI_RBCT			0x110
-+#define QUADSPI_RBCT_WMRK_MASK		0x1F
-+#define QUADSPI_RBCT_RXBRD_SHIFT	8
-+#define QUADSPI_RBCT_RXBRD_USEIPS	(0x1 << QUADSPI_RBCT_RXBRD_SHIFT)
-+
-+#define QUADSPI_TBSR			0x150
-+#define QUADSPI_TBDR			0x154
-+#define QUADSPI_SR			0x15c
-+#define QUADSPI_SR_IP_ACC_SHIFT		1
-+#define QUADSPI_SR_IP_ACC_MASK		(0x1 << QUADSPI_SR_IP_ACC_SHIFT)
-+#define QUADSPI_SR_AHB_ACC_SHIFT	2
-+#define QUADSPI_SR_AHB_ACC_MASK		(0x1 << QUADSPI_SR_AHB_ACC_SHIFT)
-+
-+#define QUADSPI_FR			0x160
-+#define QUADSPI_FR_TFF_MASK		0x1
-+
-+#define QUADSPI_SFA1AD			0x180
-+#define QUADSPI_SFA2AD			0x184
-+#define QUADSPI_SFB1AD			0x188
-+#define QUADSPI_SFB2AD			0x18c
-+#define QUADSPI_RBDR			0x200
-+
-+#define QUADSPI_LUTKEY			0x300
-+#define QUADSPI_LUTKEY_VALUE		0x5AF05AF0
-+
-+#define QUADSPI_LCKCR			0x304
-+#define QUADSPI_LCKER_LOCK		0x1
-+#define QUADSPI_LCKER_UNLOCK		0x2
-+
-+#define QUADSPI_RSER			0x164
-+#define QUADSPI_RSER_TFIE		(0x1 << 0)
-+
-+#define QUADSPI_LUT_BASE		0x310
-+
-+/*
-+ * The definition of the LUT register shows below:
-+ *
-+ *  ---------------------------------------------------
-+ *  | INSTR1 | PAD1 | OPRND1 | INSTR0 | PAD0 | OPRND0 |
-+ *  ---------------------------------------------------
-+ */
-+#define OPRND0_SHIFT		0
-+#define PAD0_SHIFT		8
-+#define INSTR0_SHIFT		10
-+#define OPRND1_SHIFT		16
-+
-+/* Instruction set for the LUT register. */
-+#define LUT_STOP		0
-+#define LUT_CMD			1
-+#define LUT_ADDR		2
-+#define LUT_DUMMY		3
-+#define LUT_MODE		4
-+#define LUT_MODE2		5
-+#define LUT_MODE4		6
-+#define LUT_READ		7
-+#define LUT_WRITE		8
-+#define LUT_JMP_ON_CS		9
-+#define LUT_ADDR_DDR		10
-+#define LUT_MODE_DDR		11
-+#define LUT_MODE2_DDR		12
-+#define LUT_MODE4_DDR		13
-+#define LUT_READ_DDR		14
-+#define LUT_WRITE_DDR		15
-+#define LUT_DATA_LEARN		16
-+
-+/*
-+ * The PAD definitions for LUT register.
-+ *
-+ * The pad stands for the lines number of IO[0:3].
-+ * For example, the Quad read need four IO lines, so you should
-+ * set LUT_PAD4 which means we use four IO lines.
-+ */
-+#define LUT_PAD1		0
-+#define LUT_PAD2		1
-+#define LUT_PAD4		2
-+
-+/* Oprands for the LUT register. */
-+#define ADDR24BIT		0x18
-+#define ADDR32BIT		0x20
-+
-+/* Macros for constructing the LUT register. */
-+#define LUT0(ins, pad, opr)						\
-+		(((opr) << OPRND0_SHIFT) | ((LUT_##pad) << PAD0_SHIFT) | \
-+		((LUT_##ins) << INSTR0_SHIFT))
-+
-+#define LUT1(ins, pad, opr)	(LUT0(ins, pad, opr) << OPRND1_SHIFT)
-+
-+/* other macros for LUT register. */
-+#define QUADSPI_LUT(x)          (QUADSPI_LUT_BASE + (x) * 4)
-+#define QUADSPI_LUT_NUM		64
-+
-+/* SEQID -- we can have 16 seqids at most. */
-+#define SEQID_QUAD_READ		0
-+#define SEQID_WREN		1
-+#define SEQID_WRDI		2
-+#define SEQID_RDSR		3
-+#define SEQID_SE		4
-+#define SEQID_CHIP_ERASE	5
-+#define SEQID_PP		6
-+#define SEQID_RDID		7
-+#define SEQID_WRSR		8
-+#define SEQID_RDCR		9
-+#define SEQID_EN4B		10
-+#define SEQID_BRWR		11
-+
-+enum fsl_qspi_devtype {
-+	FSL_QUADSPI_VYBRID,
-+	FSL_QUADSPI_IMX6SX,
-+};
-+
-+struct fsl_qspi_devtype_data {
-+	enum fsl_qspi_devtype devtype;
-+	int rxfifo;
-+	int txfifo;
-+};
-+
-+static struct fsl_qspi_devtype_data vybrid_data = {
-+	.devtype = FSL_QUADSPI_VYBRID,
-+	.rxfifo = 128,
-+	.txfifo = 64
-+};
-+
-+static struct fsl_qspi_devtype_data imx6sx_data = {
-+	.devtype = FSL_QUADSPI_IMX6SX,
-+	.rxfifo = 128,
-+	.txfifo = 512
-+};
-+
-+#define FSL_QSPI_MAX_CHIP	4
-+struct fsl_qspi {
-+	struct mtd_info mtd[FSL_QSPI_MAX_CHIP];
-+	struct spi_nor nor[FSL_QSPI_MAX_CHIP];
-+	void __iomem *iobase;
-+	void __iomem *ahb_base; /* Used when read from AHB bus */
-+	u32 memmap_phy;
-+	struct clk *clk, *clk_en;
-+	struct device *dev;
-+	struct completion c;
-+	struct fsl_qspi_devtype_data *devtype_data;
-+	u32 nor_size;
-+	u32 nor_num;
-+	u32 clk_rate;
-+	unsigned int chip_base_addr; /* We may support two chips. */
-+};
-+
-+static inline int is_vybrid_qspi(struct fsl_qspi *q)
-+{
-+	return q->devtype_data->devtype == FSL_QUADSPI_VYBRID;
-+}
-+
-+static inline int is_imx6sx_qspi(struct fsl_qspi *q)
-+{
-+	return q->devtype_data->devtype == FSL_QUADSPI_IMX6SX;
-+}
-+
-+/*
-+ * An IC bug makes us to re-arrange the 32-bit data.
-+ * The following chips, such as IMX6SLX, have fixed this bug.
-+ */
-+static inline u32 fsl_qspi_endian_xchg(struct fsl_qspi *q, u32 a)
-+{
-+	return is_vybrid_qspi(q) ? __swab32(a) : a;
-+}
-+
-+static inline void fsl_qspi_unlock_lut(struct fsl_qspi *q)
-+{
-+	writel(QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY);
-+	writel(QUADSPI_LCKER_UNLOCK, q->iobase + QUADSPI_LCKCR);
-+}
-+
-+static inline void fsl_qspi_lock_lut(struct fsl_qspi *q)
-+{
-+	writel(QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY);
-+	writel(QUADSPI_LCKER_LOCK, q->iobase + QUADSPI_LCKCR);
-+}
-+
-+static irqreturn_t fsl_qspi_irq_handler(int irq, void *dev_id)
-+{
-+	struct fsl_qspi *q = dev_id;
-+	u32 reg;
-+
-+	/* clear interrupt */
-+	reg = readl(q->iobase + QUADSPI_FR);
-+	writel(reg, q->iobase + QUADSPI_FR);
-+
-+	if (reg & QUADSPI_FR_TFF_MASK)
-+		complete(&q->c);
-+
-+	dev_dbg(q->dev, "QUADSPI_FR : 0x%.8x:0x%.8x\n", q->chip_base_addr, reg);
-+	return IRQ_HANDLED;
-+}
-+
-+static void fsl_qspi_init_lut(struct fsl_qspi *q)
-+{
-+	void __iomem *base = q->iobase;
-+	int rxfifo = q->devtype_data->rxfifo;
-+	u32 lut_base;
-+	u8 cmd, addrlen, dummy;
-+	int i;
-+
-+	fsl_qspi_unlock_lut(q);
-+
-+	/* Clear all the LUT table */
-+	for (i = 0; i < QUADSPI_LUT_NUM; i++)
-+		writel(0, base + QUADSPI_LUT_BASE + i * 4);
-+
-+	/* Quad Read */
-+	lut_base = SEQID_QUAD_READ * 4;
-+
-+	if (q->nor_size <= SZ_16M) {
-+		cmd = SPINOR_OP_READ_1_1_4;
-+		addrlen = ADDR24BIT;
-+		dummy = 8;
-+	} else {
-+		/* use the 4-byte address */
-+		cmd = SPINOR_OP_READ_1_1_4;
-+		addrlen = ADDR32BIT;
-+		dummy = 8;
-+	}
-+
-+	writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
-+			base + QUADSPI_LUT(lut_base));
-+	writel(LUT0(DUMMY, PAD1, dummy) | LUT1(READ, PAD4, rxfifo),
-+			base + QUADSPI_LUT(lut_base + 1));
-+
-+	/* Write enable */
-+	lut_base = SEQID_WREN * 4;
-+	writel(LUT0(CMD, PAD1, SPINOR_OP_WREN), base + QUADSPI_LUT(lut_base));
-+
-+	/* Page Program */
-+	lut_base = SEQID_PP * 4;
-+
-+	if (q->nor_size <= SZ_16M) {
-+		cmd = SPINOR_OP_PP;
-+		addrlen = ADDR24BIT;
-+	} else {
-+		/* use the 4-byte address */
-+		cmd = SPINOR_OP_PP;
-+		addrlen = ADDR32BIT;
-+	}
-+
-+	writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
-+			base + QUADSPI_LUT(lut_base));
-+	writel(LUT0(WRITE, PAD1, 0), base + QUADSPI_LUT(lut_base + 1));
-+
-+	/* Read Status */
-+	lut_base = SEQID_RDSR * 4;
-+	writel(LUT0(CMD, PAD1, SPINOR_OP_RDSR) | LUT1(READ, PAD1, 0x1),
-+			base + QUADSPI_LUT(lut_base));
-+
-+	/* Erase a sector */
-+	lut_base = SEQID_SE * 4;
-+
-+	if (q->nor_size <= SZ_16M) {
-+		cmd = SPINOR_OP_SE;
-+		addrlen = ADDR24BIT;
-+	} else {
-+		/* use the 4-byte address */
-+		cmd = SPINOR_OP_SE;
-+		addrlen = ADDR32BIT;
-+	}
-+
-+	writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
-+			base + QUADSPI_LUT(lut_base));
-+
-+	/* Erase the whole chip */
-+	lut_base = SEQID_CHIP_ERASE * 4;
-+	writel(LUT0(CMD, PAD1, SPINOR_OP_CHIP_ERASE),
-+			base + QUADSPI_LUT(lut_base));
-+
-+	/* READ ID */
-+	lut_base = SEQID_RDID * 4;
-+	writel(LUT0(CMD, PAD1, SPINOR_OP_RDID) | LUT1(READ, PAD1, 0x8),
-+			base + QUADSPI_LUT(lut_base));
-+
-+	/* Write Register */
-+	lut_base = SEQID_WRSR * 4;
-+	writel(LUT0(CMD, PAD1, SPINOR_OP_WRSR) | LUT1(WRITE, PAD1, 0x2),
-+			base + QUADSPI_LUT(lut_base));
-+
-+	/* Read Configuration Register */
-+	lut_base = SEQID_RDCR * 4;
-+	writel(LUT0(CMD, PAD1, SPINOR_OP_RDCR) | LUT1(READ, PAD1, 0x1),
-+			base + QUADSPI_LUT(lut_base));
-+
-+	/* Write disable */
-+	lut_base = SEQID_WRDI * 4;
-+	writel(LUT0(CMD, PAD1, SPINOR_OP_WRDI), base + QUADSPI_LUT(lut_base));
-+
-+	/* Enter 4 Byte Mode (Micron) */
-+	lut_base = SEQID_EN4B * 4;
-+	writel(LUT0(CMD, PAD1, SPINOR_OP_EN4B), base + QUADSPI_LUT(lut_base));
-+
-+	/* Enter 4 Byte Mode (Spansion) */
-+	lut_base = SEQID_BRWR * 4;
-+	writel(LUT0(CMD, PAD1, SPINOR_OP_BRWR), base + QUADSPI_LUT(lut_base));
-+
-+	fsl_qspi_lock_lut(q);
-+}
-+
-+/* Get the SEQID for the command */
-+static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd)
-+{
-+	switch (cmd) {
-+	case SPINOR_OP_READ_1_1_4:
-+		return SEQID_QUAD_READ;
-+	case SPINOR_OP_WREN:
-+		return SEQID_WREN;
-+	case SPINOR_OP_WRDI:
-+		return SEQID_WRDI;
-+	case SPINOR_OP_RDSR:
-+		return SEQID_RDSR;
-+	case SPINOR_OP_SE:
-+		return SEQID_SE;
-+	case SPINOR_OP_CHIP_ERASE:
-+		return SEQID_CHIP_ERASE;
-+	case SPINOR_OP_PP:
-+		return SEQID_PP;
-+	case SPINOR_OP_RDID:
-+		return SEQID_RDID;
-+	case SPINOR_OP_WRSR:
-+		return SEQID_WRSR;
-+	case SPINOR_OP_RDCR:
-+		return SEQID_RDCR;
-+	case SPINOR_OP_EN4B:
-+		return SEQID_EN4B;
-+	case SPINOR_OP_BRWR:
-+		return SEQID_BRWR;
-+	default:
-+		dev_err(q->dev, "Unsupported cmd 0x%.2x\n", cmd);
-+		break;
-+	}
-+	return -EINVAL;
-+}
-+
-+static int
-+fsl_qspi_runcmd(struct fsl_qspi *q, u8 cmd, unsigned int addr, int len)
-+{
-+	void __iomem *base = q->iobase;
-+	int seqid;
-+	u32 reg, reg2;
-+	int err;
-+
-+	init_completion(&q->c);
-+	dev_dbg(q->dev, "to 0x%.8x:0x%.8x, len:%d, cmd:%.2x\n",
-+			q->chip_base_addr, addr, len, cmd);
-+
-+	/* save the reg */
-+	reg = readl(base + QUADSPI_MCR);
-+
-+	writel(q->memmap_phy + q->chip_base_addr + addr, base + QUADSPI_SFAR);
-+	writel(QUADSPI_RBCT_WMRK_MASK | QUADSPI_RBCT_RXBRD_USEIPS,
-+			base + QUADSPI_RBCT);
-+	writel(reg | QUADSPI_MCR_CLR_RXF_MASK, base + QUADSPI_MCR);
-+
-+	do {
-+		reg2 = readl(base + QUADSPI_SR);
-+		if (reg2 & (QUADSPI_SR_IP_ACC_MASK | QUADSPI_SR_AHB_ACC_MASK)) {
-+			udelay(1);
-+			dev_dbg(q->dev, "The controller is busy, 0x%x\n", reg2);
-+			continue;
-+		}
-+		break;
-+	} while (1);
-+
-+	/* trigger the LUT now */
-+	seqid = fsl_qspi_get_seqid(q, cmd);
-+	writel((seqid << QUADSPI_IPCR_SEQID_SHIFT) | len, base + QUADSPI_IPCR);
-+
-+	/* Wait for the interrupt. */
-+	err = wait_for_completion_timeout(&q->c, msecs_to_jiffies(1000));
-+	if (!err) {
-+		dev_err(q->dev,
-+			"cmd 0x%.2x timeout, addr@%.8x, FR:0x%.8x, SR:0x%.8x\n",
-+			cmd, addr, readl(base + QUADSPI_FR),
-+			readl(base + QUADSPI_SR));
-+		err = -ETIMEDOUT;
-+	} else {
-+		err = 0;
-+	}
-+
-+	/* restore the MCR */
-+	writel(reg, base + QUADSPI_MCR);
-+
-+	return err;
-+}
-+
-+/* Read out the data from the QUADSPI_RBDR buffer registers. */
-+static void fsl_qspi_read_data(struct fsl_qspi *q, int len, u8 *rxbuf)
-+{
-+	u32 tmp;
-+	int i = 0;
-+
-+	while (len > 0) {
-+		tmp = readl(q->iobase + QUADSPI_RBDR + i * 4);
-+		tmp = fsl_qspi_endian_xchg(q, tmp);
-+		dev_dbg(q->dev, "chip addr:0x%.8x, rcv:0x%.8x\n",
-+				q->chip_base_addr, tmp);
-+
-+		if (len >= 4) {
-+			*((u32 *)rxbuf) = tmp;
-+			rxbuf += 4;
-+		} else {
-+			memcpy(rxbuf, &tmp, len);
-+			break;
-+		}
-+
-+		len -= 4;
-+		i++;
-+	}
-+}
-+
-+/*
-+ * If we have changed the content of the flash by writing or erasing,
-+ * we need to invalidate the AHB buffer. If we do not do so, we may read out
-+ * the wrong data. The spec tells us reset the AHB domain and Serial Flash
-+ * domain at the same time.
-+ */
-+static inline void fsl_qspi_invalid(struct fsl_qspi *q)
-+{
-+	u32 reg;
-+
-+	reg = readl(q->iobase + QUADSPI_MCR);
-+	reg |= QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK;
-+	writel(reg, q->iobase + QUADSPI_MCR);
-+
-+	/*
-+	 * The minimum delay : 1 AHB + 2 SFCK clocks.
-+	 * Delay 1 us is enough.
-+	 */
-+	udelay(1);
-+
-+	reg &= ~(QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK);
-+	writel(reg, q->iobase + QUADSPI_MCR);
-+}
-+
-+static int fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor,
-+				u8 opcode, unsigned int to, u32 *txbuf,
-+				unsigned count, size_t *retlen)
-+{
-+	int ret, i, j;
-+	u32 tmp;
-+
-+	dev_dbg(q->dev, "to 0x%.8x:0x%.8x, len : %d\n",
-+		q->chip_base_addr, to, count);
-+
-+	/* clear the TX FIFO. */
-+	tmp = readl(q->iobase + QUADSPI_MCR);
-+	writel(tmp | QUADSPI_MCR_CLR_RXF_MASK, q->iobase + QUADSPI_MCR);
-+
-+	/* fill the TX data to the FIFO */
-+	for (j = 0, i = ((count + 3) / 4); j < i; j++) {
-+		tmp = fsl_qspi_endian_xchg(q, *txbuf);
-+		writel(tmp, q->iobase + QUADSPI_TBDR);
-+		txbuf++;
-+	}
-+
-+	/* Trigger it */
-+	ret = fsl_qspi_runcmd(q, opcode, to, count);
-+
-+	if (ret == 0 && retlen)
-+		*retlen += count;
-+
-+	return ret;
-+}
-+
-+static void fsl_qspi_set_map_addr(struct fsl_qspi *q)
-+{
-+	int nor_size = q->nor_size;
-+	void __iomem *base = q->iobase;
-+
-+	writel(nor_size + q->memmap_phy, base + QUADSPI_SFA1AD);
-+	writel(nor_size * 2 + q->memmap_phy, base + QUADSPI_SFA2AD);
-+	writel(nor_size * 3 + q->memmap_phy, base + QUADSPI_SFB1AD);
-+	writel(nor_size * 4 + q->memmap_phy, base + QUADSPI_SFB2AD);
-+}
-+
-+/*
-+ * There are two different ways to read out the data from the flash:
-+ *  the "IP Command Read" and the "AHB Command Read".
-+ *
-+ * The IC guy suggests we use the "AHB Command Read" which is faster
-+ * then the "IP Command Read". (What's more is that there is a bug in
-+ * the "IP Command Read" in the Vybrid.)
-+ *
-+ * After we set up the registers for the "AHB Command Read", we can use
-+ * the memcpy to read the data directly. A "missed" access to the buffer
-+ * causes the controller to clear the buffer, and use the sequence pointed
-+ * by the QUADSPI_BFGENCR[SEQID] to initiate a read from the flash.
-+ */
-+static void fsl_qspi_init_abh_read(struct fsl_qspi *q)
-+{
-+	void __iomem *base = q->iobase;
-+	int seqid;
-+
-+	/* AHB configuration for access buffer 0/1/2 .*/
-+	writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF0CR);
-+	writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF1CR);
-+	writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF2CR);
-+	writel(QUADSPI_BUF3CR_ALLMST, base + QUADSPI_BUF3CR);
-+
-+	/* We only use the buffer3 */
-+	writel(0, base + QUADSPI_BUF0IND);
-+	writel(0, base + QUADSPI_BUF1IND);
-+	writel(0, base + QUADSPI_BUF2IND);
-+
-+	/* Set the default lut sequence for AHB Read. */
-+	seqid = fsl_qspi_get_seqid(q, q->nor[0].read_opcode);
-+	writel(seqid << QUADSPI_BFGENCR_SEQID_SHIFT,
-+		q->iobase + QUADSPI_BFGENCR);
-+}
-+
-+/* We use this function to do some basic init for spi_nor_scan(). */
-+static int fsl_qspi_nor_setup(struct fsl_qspi *q)
-+{
-+	void __iomem *base = q->iobase;
-+	u32 reg;
-+	int ret;
-+
-+	/* the default frequency, we will change it in the future.*/
-+	ret = clk_set_rate(q->clk, 66000000);
-+	if (ret)
-+		return ret;
-+
-+	/* Init the LUT table. */
-+	fsl_qspi_init_lut(q);
-+
-+	/* Disable the module */
-+	writel(QUADSPI_MCR_MDIS_MASK | QUADSPI_MCR_RESERVED_MASK,
-+			base + QUADSPI_MCR);
-+
-+	reg = readl(base + QUADSPI_SMPR);
-+	writel(reg & ~(QUADSPI_SMPR_FSDLY_MASK
-+			| QUADSPI_SMPR_FSPHS_MASK
-+			| QUADSPI_SMPR_HSENA_MASK
-+			| QUADSPI_SMPR_DDRSMP_MASK), base + QUADSPI_SMPR);
-+
-+	/* Enable the module */
-+	writel(QUADSPI_MCR_RESERVED_MASK | QUADSPI_MCR_END_CFG_MASK,
-+			base + QUADSPI_MCR);
-+
-+	/* enable the interrupt */
-+	writel(QUADSPI_RSER_TFIE, q->iobase + QUADSPI_RSER);
-+
-+	return 0;
-+}
-+
-+static int fsl_qspi_nor_setup_last(struct fsl_qspi *q)
-+{
-+	unsigned long rate = q->clk_rate;
-+	int ret;
-+
-+	if (is_imx6sx_qspi(q))
-+		rate *= 4;
-+
-+	ret = clk_set_rate(q->clk, rate);
-+	if (ret)
-+		return ret;
-+
-+	/* Init the LUT table again. */
-+	fsl_qspi_init_lut(q);
-+
-+	/* Init for AHB read */
-+	fsl_qspi_init_abh_read(q);
-+
-+	return 0;
-+}
-+
-+static struct of_device_id fsl_qspi_dt_ids[] = {
-+	{ .compatible = "fsl,vf610-qspi", .data = (void *)&vybrid_data, },
-+	{ .compatible = "fsl,imx6sx-qspi", .data = (void *)&imx6sx_data, },
-+	{ /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids);
-+
-+static void fsl_qspi_set_base_addr(struct fsl_qspi *q, struct spi_nor *nor)
-+{
-+	q->chip_base_addr = q->nor_size * (nor - q->nor);
-+}
-+
-+static int fsl_qspi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
-+{
-+	int ret;
-+	struct fsl_qspi *q = nor->priv;
-+
-+	ret = fsl_qspi_runcmd(q, opcode, 0, len);
-+	if (ret)
-+		return ret;
-+
-+	fsl_qspi_read_data(q, len, buf);
-+	return 0;
-+}
-+
-+static int fsl_qspi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len,
-+			int write_enable)
-+{
-+	struct fsl_qspi *q = nor->priv;
-+	int ret;
-+
-+	if (!buf) {
-+		ret = fsl_qspi_runcmd(q, opcode, 0, 1);
-+		if (ret)
-+			return ret;
-+
-+		if (opcode == SPINOR_OP_CHIP_ERASE)
-+			fsl_qspi_invalid(q);
-+
-+	} else if (len > 0) {
-+		ret = fsl_qspi_nor_write(q, nor, opcode, 0,
-+					(u32 *)buf, len, NULL);
-+	} else {
-+		dev_err(q->dev, "invalid cmd %d\n", opcode);
-+		ret = -EINVAL;
-+	}
-+
-+	return ret;
-+}
-+
-+static void fsl_qspi_write(struct spi_nor *nor, loff_t to,
-+		size_t len, size_t *retlen, const u_char *buf)
-+{
-+	struct fsl_qspi *q = nor->priv;
-+
-+	fsl_qspi_nor_write(q, nor, nor->program_opcode, to,
-+				(u32 *)buf, len, retlen);
-+
-+	/* invalid the data in the AHB buffer. */
-+	fsl_qspi_invalid(q);
-+}
-+
-+static int fsl_qspi_read(struct spi_nor *nor, loff_t from,
-+		size_t len, size_t *retlen, u_char *buf)
-+{
-+	struct fsl_qspi *q = nor->priv;
-+	u8 cmd = nor->read_opcode;
-+	int ret;
-+
-+	dev_dbg(q->dev, "cmd [%x],read from (0x%p, 0x%.8x, 0x%.8x),len:%d\n",
-+		cmd, q->ahb_base, q->chip_base_addr, (unsigned int)from, len);
-+
-+	/* Wait until the previous command is finished. */
-+	ret = nor->wait_till_ready(nor);
-+	if (ret)
-+		return ret;
-+
-+	/* Read out the data directly from the AHB buffer.*/
-+	memcpy(buf, q->ahb_base + q->chip_base_addr + from, len);
-+
-+	*retlen += len;
-+	return 0;
-+}
-+
-+static int fsl_qspi_erase(struct spi_nor *nor, loff_t offs)
-+{
-+	struct fsl_qspi *q = nor->priv;
-+	int ret;
-+
-+	dev_dbg(nor->dev, "%dKiB at 0x%08x:0x%08x\n",
-+		nor->mtd->erasesize / 1024, q->chip_base_addr, (u32)offs);
-+
-+	/* Wait until finished previous write command. */
-+	ret = nor->wait_till_ready(nor);
-+	if (ret)
-+		return ret;
-+
-+	/* Send write enable, then erase commands. */
-+	ret = nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0);
-+	if (ret)
-+		return ret;
-+
-+	ret = fsl_qspi_runcmd(q, nor->erase_opcode, offs, 0);
-+	if (ret)
-+		return ret;
-+
-+	fsl_qspi_invalid(q);
-+	return 0;
-+}
-+
-+static int fsl_qspi_prep(struct spi_nor *nor, enum spi_nor_ops ops)
-+{
-+	struct fsl_qspi *q = nor->priv;
-+	int ret;
-+
-+	ret = clk_enable(q->clk_en);
-+	if (ret)
-+		return ret;
-+
-+	ret = clk_enable(q->clk);
-+	if (ret) {
-+		clk_disable(q->clk_en);
-+		return ret;
-+	}
-+
-+	fsl_qspi_set_base_addr(q, nor);
-+	return 0;
-+}
-+
-+static void fsl_qspi_unprep(struct spi_nor *nor, enum spi_nor_ops ops)
-+{
-+	struct fsl_qspi *q = nor->priv;
-+
-+	clk_disable(q->clk);
-+	clk_disable(q->clk_en);
-+}
-+
-+static int fsl_qspi_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node;
-+	struct mtd_part_parser_data ppdata;
-+	struct device *dev = &pdev->dev;
-+	struct fsl_qspi *q;
-+	struct resource *res;
-+	struct spi_nor *nor;
-+	struct mtd_info *mtd;
-+	int ret, i = 0;
-+	bool has_second_chip = false;
-+	const struct of_device_id *of_id =
-+			of_match_device(fsl_qspi_dt_ids, &pdev->dev);
-+
-+	q = devm_kzalloc(dev, sizeof(*q), GFP_KERNEL);
-+	if (!q)
-+		return -ENOMEM;
-+
-+	q->nor_num = of_get_child_count(dev->of_node);
-+	if (!q->nor_num || q->nor_num > FSL_QSPI_MAX_CHIP)
-+		return -ENODEV;
-+
-+	/* find the resources */
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "QuadSPI");
-+	q->iobase = devm_ioremap_resource(dev, res);
-+	if (IS_ERR(q->iobase)) {
-+		ret = PTR_ERR(q->iobase);
-+		goto map_failed;
-+	}
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+					"QuadSPI-memory");
-+	q->ahb_base = devm_ioremap_resource(dev, res);
-+	if (IS_ERR(q->ahb_base)) {
-+		ret = PTR_ERR(q->ahb_base);
-+		goto map_failed;
-+	}
-+	q->memmap_phy = res->start;
-+
-+	/* find the clocks */
-+	q->clk_en = devm_clk_get(dev, "qspi_en");
-+	if (IS_ERR(q->clk_en)) {
-+		ret = PTR_ERR(q->clk_en);
-+		goto map_failed;
-+	}
-+
-+	q->clk = devm_clk_get(dev, "qspi");
-+	if (IS_ERR(q->clk)) {
-+		ret = PTR_ERR(q->clk);
-+		goto map_failed;
-+	}
-+
-+	ret = clk_prepare_enable(q->clk_en);
-+	if (ret) {
-+		dev_err(dev, "can not enable the qspi_en clock\n");
-+		goto map_failed;
-+	}
-+
-+	ret = clk_prepare_enable(q->clk);
-+	if (ret) {
-+		clk_disable_unprepare(q->clk_en);
-+		dev_err(dev, "can not enable the qspi clock\n");
-+		goto map_failed;
-+	}
-+
-+	/* find the irq */
-+	ret = platform_get_irq(pdev, 0);
-+	if (ret < 0) {
-+		dev_err(dev, "failed to get the irq\n");
-+		goto irq_failed;
-+	}
-+
-+	ret = devm_request_irq(dev, ret,
-+			fsl_qspi_irq_handler, 0, pdev->name, q);
-+	if (ret) {
-+		dev_err(dev, "failed to request irq.\n");
-+		goto irq_failed;
-+	}
-+
-+	q->dev = dev;
-+	q->devtype_data = (struct fsl_qspi_devtype_data *)of_id->data;
-+	platform_set_drvdata(pdev, q);
-+
-+	ret = fsl_qspi_nor_setup(q);
-+	if (ret)
-+		goto irq_failed;
-+
-+	if (of_get_property(np, "fsl,qspi-has-second-chip", NULL))
-+		has_second_chip = true;
-+
-+	/* iterate the subnodes. */
-+	for_each_available_child_of_node(dev->of_node, np) {
-+		const struct spi_device_id *id;
-+		char modalias[40];
-+
-+		/* skip the holes */
-+		if (!has_second_chip)
-+			i *= 2;
-+
-+		nor = &q->nor[i];
-+		mtd = &q->mtd[i];
-+
-+		nor->mtd = mtd;
-+		nor->dev = dev;
-+		nor->priv = q;
-+		mtd->priv = nor;
-+
-+		/* fill the hooks */
-+		nor->read_reg = fsl_qspi_read_reg;
-+		nor->write_reg = fsl_qspi_write_reg;
-+		nor->read = fsl_qspi_read;
-+		nor->write = fsl_qspi_write;
-+		nor->erase = fsl_qspi_erase;
-+
-+		nor->prepare = fsl_qspi_prep;
-+		nor->unprepare = fsl_qspi_unprep;
-+
-+		if (of_modalias_node(np, modalias, sizeof(modalias)) < 0)
-+			goto map_failed;
-+
-+		id = spi_nor_match_id(modalias);
-+		if (!id)
-+			goto map_failed;
-+
-+		ret = of_property_read_u32(np, "spi-max-frequency",
-+				&q->clk_rate);
-+		if (ret < 0)
-+			goto map_failed;
-+
-+		/* set the chip address for READID */
-+		fsl_qspi_set_base_addr(q, nor);
-+
-+		ret = spi_nor_scan(nor, id, SPI_NOR_QUAD);
-+		if (ret)
-+			goto map_failed;
-+
-+		ppdata.of_node = np;
-+		ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
-+		if (ret)
-+			goto map_failed;
-+
-+		/* Set the correct NOR size now. */
-+		if (q->nor_size == 0) {
-+			q->nor_size = mtd->size;
-+
-+			/* Map the SPI NOR to accessiable address */
-+			fsl_qspi_set_map_addr(q);
-+		}
-+
-+		/*
-+		 * The TX FIFO is 64 bytes in the Vybrid, but the Page Program
-+		 * may writes 265 bytes per time. The write is working in the
-+		 * unit of the TX FIFO, not in the unit of the SPI NOR's page
-+		 * size.
-+		 *
-+		 * So shrink the spi_nor->page_size if it is larger then the
-+		 * TX FIFO.
-+		 */
-+		if (nor->page_size > q->devtype_data->txfifo)
-+			nor->page_size = q->devtype_data->txfifo;
-+
-+		i++;
-+	}
-+
-+	/* finish the rest init. */
-+	ret = fsl_qspi_nor_setup_last(q);
-+	if (ret)
-+		goto last_init_failed;
-+
-+	clk_disable(q->clk);
-+	clk_disable(q->clk_en);
-+	dev_info(dev, "QuadSPI SPI NOR flash driver\n");
-+	return 0;
-+
-+last_init_failed:
-+	for (i = 0; i < q->nor_num; i++)
-+		mtd_device_unregister(&q->mtd[i]);
-+
-+irq_failed:
-+	clk_disable_unprepare(q->clk);
-+	clk_disable_unprepare(q->clk_en);
-+map_failed:
-+	dev_err(dev, "Freescale QuadSPI probe failed\n");
-+	return ret;
-+}
-+
-+static int fsl_qspi_remove(struct platform_device *pdev)
-+{
-+	struct fsl_qspi *q = platform_get_drvdata(pdev);
-+	int i;
-+
-+	for (i = 0; i < q->nor_num; i++)
-+		mtd_device_unregister(&q->mtd[i]);
-+
-+	/* disable the hardware */
-+	writel(QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR);
-+	writel(0x0, q->iobase + QUADSPI_RSER);
-+
-+	clk_unprepare(q->clk);
-+	clk_unprepare(q->clk_en);
-+	return 0;
-+}
-+
-+static struct platform_driver fsl_qspi_driver = {
-+	.driver = {
-+		.name	= "fsl-quadspi",
-+		.bus	= &platform_bus_type,
-+		.owner	= THIS_MODULE,
-+		.of_match_table = fsl_qspi_dt_ids,
-+	},
-+	.probe          = fsl_qspi_probe,
-+	.remove		= fsl_qspi_remove,
-+};
-+module_platform_driver(fsl_qspi_driver);
-+
-+MODULE_DESCRIPTION("Freescale QuadSPI Controller Driver");
-+MODULE_AUTHOR("Freescale Semiconductor Inc.");
-+MODULE_LICENSE("GPL v2");
---- /dev/null
-+++ b/drivers/mtd/spi-nor/Kconfig
-@@ -0,0 +1,17 @@
-+menuconfig MTD_SPI_NOR
-+	tristate "SPI-NOR device support"
-+	depends on MTD
-+	help
-+	  This is the framework for the SPI NOR which can be used by the SPI
-+	  device drivers and the SPI-NOR device driver.
-+
-+if MTD_SPI_NOR
-+
-+config SPI_FSL_QUADSPI
-+	tristate "Freescale Quad SPI controller"
-+	depends on ARCH_MXC
-+	help
-+	  This enables support for the Quad SPI controller in master mode.
-+	  We only connect the NOR to this controller now.
-+
-+endif # MTD_SPI_NOR
---- /dev/null
-+++ b/drivers/mtd/spi-nor/Makefile
-@@ -0,0 +1,2 @@
-+obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor.o
-+obj-$(CONFIG_SPI_FSL_QUADSPI)	+= fsl-quadspi.o
---- /dev/null
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -0,0 +1,1160 @@
-+/*
-+ * Based on m25p80.c, by Mike Lavender (mike@steroidmicros.com), with
-+ * influence from lart.c (Abraham Van Der Merwe) and mtd_dataflash.c
-+ *
-+ * Copyright (C) 2005, Intec Automation Inc.
-+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
-+ *
-+ * This code is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/err.h>
-+#include <linux/errno.h>
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/mutex.h>
-+#include <linux/math64.h>
-+
-+#include <linux/mtd/cfi.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/of_platform.h>
-+#include <linux/spi/flash.h>
-+#include <linux/mtd/spi-nor.h>
-+
-+/* Define max times to check status register before we give up. */
-+#define	MAX_READY_WAIT_JIFFIES	(40 * HZ) /* M25P16 specs 40s max chip erase */
-+
-+#define JEDEC_MFR(_jedec_id)	((_jedec_id) >> 16)
-+
-+/*
-+ * Read the status register, returning its value in the location
-+ * Return the status register value.
-+ * Returns negative if error occurred.
-+ */
-+static int read_sr(struct spi_nor *nor)
-+{
-+	int ret;
-+	u8 val;
-+
-+	ret = nor->read_reg(nor, SPINOR_OP_RDSR, &val, 1);
-+	if (ret < 0) {
-+		pr_err("error %d reading SR\n", (int) ret);
-+		return ret;
-+	}
-+
-+	return val;
-+}
-+
-+/*
-+ * Read the flag status register, returning its value in the location
-+ * Return the status register value.
-+ * Returns negative if error occurred.
-+ */
-+static int read_fsr(struct spi_nor *nor)
-+{
-+	int ret;
-+	u8 val;
-+
-+	ret = nor->read_reg(nor, SPINOR_OP_RDFSR, &val, 1);
-+	if (ret < 0) {
-+		pr_err("error %d reading FSR\n", ret);
-+		return ret;
-+	}
-+
-+	return val;
-+}
-+
-+/*
-+ * Read configuration register, returning its value in the
-+ * location. Return the configuration register value.
-+ * Returns negative if error occured.
-+ */
-+static int read_cr(struct spi_nor *nor)
-+{
-+	int ret;
-+	u8 val;
-+
-+	ret = nor->read_reg(nor, SPINOR_OP_RDCR, &val, 1);
-+	if (ret < 0) {
-+		dev_err(nor->dev, "error %d reading CR\n", ret);
-+		return ret;
-+	}
-+
-+	return val;
-+}
-+
-+/*
-+ * Dummy Cycle calculation for different type of read.
-+ * It can be used to support more commands with
-+ * different dummy cycle requirements.
-+ */
-+static inline int spi_nor_read_dummy_cycles(struct spi_nor *nor)
-+{
-+	switch (nor->flash_read) {
-+	case SPI_NOR_FAST:
-+	case SPI_NOR_DUAL:
-+	case SPI_NOR_QUAD:
-+		return 1;
-+	case SPI_NOR_NORMAL:
-+		return 0;
-+	}
-+	return 0;
-+}
-+
-+/*
-+ * Write status register 1 byte
-+ * Returns negative if error occurred.
-+ */
-+static inline int write_sr(struct spi_nor *nor, u8 val)
-+{
-+	nor->cmd_buf[0] = val;
-+	return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1, 0);
-+}
-+
-+/*
-+ * Set write enable latch with Write Enable command.
-+ * Returns negative if error occurred.
-+ */
-+static inline int write_enable(struct spi_nor *nor)
-+{
-+	return nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0);
-+}
-+
-+/*
-+ * Send write disble instruction to the chip.
-+ */
-+static inline int write_disable(struct spi_nor *nor)
-+{
-+	return nor->write_reg(nor, SPINOR_OP_WRDI, NULL, 0, 0);
-+}
-+
-+static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd)
-+{
-+	return mtd->priv;
-+}
-+
-+/* Enable/disable 4-byte addressing mode. */
-+static inline int set_4byte(struct spi_nor *nor, u32 jedec_id, int enable)
-+{
-+	int status;
-+	bool need_wren = false;
-+	u8 cmd;
-+
-+	switch (JEDEC_MFR(jedec_id)) {
-+	case CFI_MFR_ST: /* Micron, actually */
-+		/* Some Micron need WREN command; all will accept it */
-+		need_wren = true;
-+	case CFI_MFR_MACRONIX:
-+	case 0xEF /* winbond */:
-+		if (need_wren)
-+			write_enable(nor);
-+
-+		cmd = enable ? SPINOR_OP_EN4B : SPINOR_OP_EX4B;
-+		status = nor->write_reg(nor, cmd, NULL, 0, 0);
-+		if (need_wren)
-+			write_disable(nor);
-+
-+		return status;
-+	default:
-+		/* Spansion style */
-+		nor->cmd_buf[0] = enable << 7;
-+		return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1, 0);
-+	}
-+}
-+
-+static int spi_nor_wait_till_ready(struct spi_nor *nor)
-+{
-+	unsigned long deadline;
-+	int sr;
-+
-+	deadline = jiffies + MAX_READY_WAIT_JIFFIES;
-+
-+	do {
-+		cond_resched();
-+
-+		sr = read_sr(nor);
-+		if (sr < 0)
-+			break;
-+		else if (!(sr & SR_WIP))
-+			return 0;
-+	} while (!time_after_eq(jiffies, deadline));
-+
-+	return -ETIMEDOUT;
-+}
-+
-+static int spi_nor_wait_till_fsr_ready(struct spi_nor *nor)
-+{
-+	unsigned long deadline;
-+	int sr;
-+	int fsr;
-+
-+	deadline = jiffies + MAX_READY_WAIT_JIFFIES;
-+
-+	do {
-+		cond_resched();
-+
-+		sr = read_sr(nor);
-+		if (sr < 0) {
-+			break;
-+		} else if (!(sr & SR_WIP)) {
-+			fsr = read_fsr(nor);
-+			if (fsr < 0)
-+				break;
-+			if (fsr & FSR_READY)
-+				return 0;
-+		}
-+	} while (!time_after_eq(jiffies, deadline));
-+
-+	return -ETIMEDOUT;
-+}
-+
-+/*
-+ * Service routine to read status register until ready, or timeout occurs.
-+ * Returns non-zero if error.
-+ */
-+static int wait_till_ready(struct spi_nor *nor)
-+{
-+	return nor->wait_till_ready(nor);
-+}
-+
-+/*
-+ * Erase the whole flash memory
-+ *
-+ * Returns 0 if successful, non-zero otherwise.
-+ */
-+static int erase_chip(struct spi_nor *nor)
-+{
-+	int ret;
-+
-+	dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd->size >> 10));
-+
-+	/* Wait until finished previous write command. */
-+	ret = wait_till_ready(nor);
-+	if (ret)
-+		return ret;
-+
-+	/* Send write enable, then erase commands. */
-+	write_enable(nor);
-+
-+	return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0, 0);
-+}
-+
-+static int spi_nor_lock_and_prep(struct spi_nor *nor, enum spi_nor_ops ops)
-+{
-+	int ret = 0;
-+
-+	mutex_lock(&nor->lock);
-+
-+	if (nor->prepare) {
-+		ret = nor->prepare(nor, ops);
-+		if (ret) {
-+			dev_err(nor->dev, "failed in the preparation.\n");
-+			mutex_unlock(&nor->lock);
-+			return ret;
-+		}
-+	}
-+	return ret;
-+}
-+
-+static void spi_nor_unlock_and_unprep(struct spi_nor *nor, enum spi_nor_ops ops)
-+{
-+	if (nor->unprepare)
-+		nor->unprepare(nor, ops);
-+	mutex_unlock(&nor->lock);
-+}
-+
-+/*
-+ * Erase an address range on the nor chip.  The address range may extend
-+ * one or more erase sectors.  Return an error is there is a problem erasing.
-+ */
-+static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
-+{
-+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
-+	u32 addr, len;
-+	uint32_t rem;
-+	int ret;
-+
-+	dev_dbg(nor->dev, "at 0x%llx, len %lld\n", (long long)instr->addr,
-+			(long long)instr->len);
-+
-+	div_u64_rem(instr->len, mtd->erasesize, &rem);
-+	if (rem)
-+		return -EINVAL;
-+
-+	addr = instr->addr;
-+	len = instr->len;
-+
-+	ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_ERASE);
-+	if (ret)
-+		return ret;
-+
-+	/* whole-chip erase? */
-+	if (len == mtd->size) {
-+		if (erase_chip(nor)) {
-+			ret = -EIO;
-+			goto erase_err;
-+		}
-+
-+	/* REVISIT in some cases we could speed up erasing large regions
-+	 * by using SPINOR_OP_SE instead of SPINOR_OP_BE_4K.  We may have set up
-+	 * to use "small sector erase", but that's not always optimal.
-+	 */
-+
-+	/* "sector"-at-a-time erase */
-+	} else {
-+		while (len) {
-+			if (nor->erase(nor, addr)) {
-+				ret = -EIO;
-+				goto erase_err;
-+			}
-+
-+			addr += mtd->erasesize;
-+			len -= mtd->erasesize;
-+		}
-+	}
-+
-+	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE);
-+
-+	instr->state = MTD_ERASE_DONE;
-+	mtd_erase_callback(instr);
-+
-+	return ret;
-+
-+erase_err:
-+	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE);
-+	instr->state = MTD_ERASE_FAILED;
-+	return ret;
-+}
-+
-+static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
-+{
-+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
-+	uint32_t offset = ofs;
-+	uint8_t status_old, status_new;
-+	int ret = 0;
-+
-+	ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_LOCK);
-+	if (ret)
-+		return ret;
-+
-+	/* Wait until finished previous command */
-+	ret = wait_till_ready(nor);
-+	if (ret)
-+		goto err;
-+
-+	status_old = read_sr(nor);
-+
-+	if (offset < mtd->size - (mtd->size / 2))
-+		status_new = status_old | SR_BP2 | SR_BP1 | SR_BP0;
-+	else if (offset < mtd->size - (mtd->size / 4))
-+		status_new = (status_old & ~SR_BP0) | SR_BP2 | SR_BP1;
-+	else if (offset < mtd->size - (mtd->size / 8))
-+		status_new = (status_old & ~SR_BP1) | SR_BP2 | SR_BP0;
-+	else if (offset < mtd->size - (mtd->size / 16))
-+		status_new = (status_old & ~(SR_BP0 | SR_BP1)) | SR_BP2;
-+	else if (offset < mtd->size - (mtd->size / 32))
-+		status_new = (status_old & ~SR_BP2) | SR_BP1 | SR_BP0;
-+	else if (offset < mtd->size - (mtd->size / 64))
-+		status_new = (status_old & ~(SR_BP2 | SR_BP0)) | SR_BP1;
-+	else
-+		status_new = (status_old & ~(SR_BP2 | SR_BP1)) | SR_BP0;
-+
-+	/* Only modify protection if it will not unlock other areas */
-+	if ((status_new & (SR_BP2 | SR_BP1 | SR_BP0)) >
-+				(status_old & (SR_BP2 | SR_BP1 | SR_BP0))) {
-+		write_enable(nor);
-+		ret = write_sr(nor, status_new);
-+		if (ret)
-+			goto err;
-+	}
-+
-+err:
-+	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK);
-+	return ret;
-+}
-+
-+static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
-+{
-+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
-+	uint32_t offset = ofs;
-+	uint8_t status_old, status_new;
-+	int ret = 0;
-+
-+	ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_UNLOCK);
-+	if (ret)
-+		return ret;
-+
-+	/* Wait until finished previous command */
-+	ret = wait_till_ready(nor);
-+	if (ret)
-+		goto err;
-+
-+	status_old = read_sr(nor);
-+
-+	if (offset+len > mtd->size - (mtd->size / 64))
-+		status_new = status_old & ~(SR_BP2 | SR_BP1 | SR_BP0);
-+	else if (offset+len > mtd->size - (mtd->size / 32))
-+		status_new = (status_old & ~(SR_BP2 | SR_BP1)) | SR_BP0;
-+	else if (offset+len > mtd->size - (mtd->size / 16))
-+		status_new = (status_old & ~(SR_BP2 | SR_BP0)) | SR_BP1;
-+	else if (offset+len > mtd->size - (mtd->size / 8))
-+		status_new = (status_old & ~SR_BP2) | SR_BP1 | SR_BP0;
-+	else if (offset+len > mtd->size - (mtd->size / 4))
-+		status_new = (status_old & ~(SR_BP0 | SR_BP1)) | SR_BP2;
-+	else if (offset+len > mtd->size - (mtd->size / 2))
-+		status_new = (status_old & ~SR_BP1) | SR_BP2 | SR_BP0;
-+	else
-+		status_new = (status_old & ~SR_BP0) | SR_BP2 | SR_BP1;
-+
-+	/* Only modify protection if it will not lock other areas */
-+	if ((status_new & (SR_BP2 | SR_BP1 | SR_BP0)) <
-+				(status_old & (SR_BP2 | SR_BP1 | SR_BP0))) {
-+		write_enable(nor);
-+		ret = write_sr(nor, status_new);
-+		if (ret)
-+			goto err;
-+	}
-+
-+err:
-+	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_UNLOCK);
-+	return ret;
-+}
-+
-+struct flash_info {
-+	/* JEDEC id zero means "no ID" (most older chips); otherwise it has
-+	 * a high byte of zero plus three data bytes: the manufacturer id,
-+	 * then a two byte device id.
-+	 */
-+	u32		jedec_id;
-+	u16             ext_id;
-+
-+	/* The size listed here is what works with SPINOR_OP_SE, which isn't
-+	 * necessarily called a "sector" by the vendor.
-+	 */
-+	unsigned	sector_size;
-+	u16		n_sectors;
-+
-+	u16		page_size;
-+	u16		addr_width;
-+
-+	u16		flags;
-+#define	SECT_4K			0x01	/* SPINOR_OP_BE_4K works uniformly */
-+#define	SPI_NOR_NO_ERASE	0x02	/* No erase command needed */
-+#define	SST_WRITE		0x04	/* use SST byte programming */
-+#define	SPI_NOR_NO_FR		0x08	/* Can't do fastread */
-+#define	SECT_4K_PMC		0x10	/* SPINOR_OP_BE_4K_PMC works uniformly */
-+#define	SPI_NOR_DUAL_READ	0x20    /* Flash supports Dual Read */
-+#define	SPI_NOR_QUAD_READ	0x40    /* Flash supports Quad Read */
-+#define	USE_FSR			0x80	/* use flag status register */
-+};
-+
-+#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
-+	((kernel_ulong_t)&(struct flash_info) {				\
-+		.jedec_id = (_jedec_id),				\
-+		.ext_id = (_ext_id),					\
-+		.sector_size = (_sector_size),				\
-+		.n_sectors = (_n_sectors),				\
-+		.page_size = 256,					\
-+		.flags = (_flags),					\
-+	})
-+
-+#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags)	\
-+	((kernel_ulong_t)&(struct flash_info) {				\
-+		.sector_size = (_sector_size),				\
-+		.n_sectors = (_n_sectors),				\
-+		.page_size = (_page_size),				\
-+		.addr_width = (_addr_width),				\
-+		.flags = (_flags),					\
-+	})
-+
-+/* NOTE: double check command sets and memory organization when you add
-+ * more nor chips.  This current list focusses on newer chips, which
-+ * have been converging on command sets which including JEDEC ID.
-+ */
-+const struct spi_device_id spi_nor_ids[] = {
-+	/* Atmel -- some are (confusingly) marketed as "DataFlash" */
-+	{ "at25fs010",  INFO(0x1f6601, 0, 32 * 1024,   4, SECT_4K) },
-+	{ "at25fs040",  INFO(0x1f6604, 0, 64 * 1024,   8, SECT_4K) },
-+
-+	{ "at25df041a", INFO(0x1f4401, 0, 64 * 1024,   8, SECT_4K) },
-+	{ "at25df321a", INFO(0x1f4701, 0, 64 * 1024,  64, SECT_4K) },
-+	{ "at25df641",  INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K) },
-+
-+	{ "at26f004",   INFO(0x1f0400, 0, 64 * 1024,  8, SECT_4K) },
-+	{ "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16, SECT_4K) },
-+	{ "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) },
-+	{ "at26df321",  INFO(0x1f4700, 0, 64 * 1024, 64, SECT_4K) },
-+
-+	{ "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) },
-+
-+	/* EON -- en25xxx */
-+	{ "en25f32",    INFO(0x1c3116, 0, 64 * 1024,   64, SECT_4K) },
-+	{ "en25p32",    INFO(0x1c2016, 0, 64 * 1024,   64, 0) },
-+	{ "en25q32b",   INFO(0x1c3016, 0, 64 * 1024,   64, 0) },
-+	{ "en25p64",    INFO(0x1c2017, 0, 64 * 1024,  128, 0) },
-+	{ "en25q64",    INFO(0x1c3017, 0, 64 * 1024,  128, SECT_4K) },
-+	{ "en25qh128",  INFO(0x1c7018, 0, 64 * 1024,  256, 0) },
-+	{ "en25qh256",  INFO(0x1c7019, 0, 64 * 1024,  512, 0) },
-+
-+	/* ESMT */
-+	{ "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K) },
-+
-+	/* Everspin */
-+	{ "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-+	{ "mr25h10",  CAT25_INFO(128 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-+
-+	/* GigaDevice */
-+	{ "gd25q32", INFO(0xc84016, 0, 64 * 1024,  64, SECT_4K) },
-+	{ "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) },
-+
-+	/* Intel/Numonyx -- xxxs33b */
-+	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  32, 0) },
-+	{ "320s33b",  INFO(0x898912, 0, 64 * 1024,  64, 0) },
-+	{ "640s33b",  INFO(0x898913, 0, 64 * 1024, 128, 0) },
-+
-+	/* Macronix */
-+	{ "mx25l2005a",  INFO(0xc22012, 0, 64 * 1024,   4, SECT_4K) },
-+	{ "mx25l4005a",  INFO(0xc22013, 0, 64 * 1024,   8, SECT_4K) },
-+	{ "mx25l8005",   INFO(0xc22014, 0, 64 * 1024,  16, 0) },
-+	{ "mx25l1606e",  INFO(0xc22015, 0, 64 * 1024,  32, SECT_4K) },
-+	{ "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64, 0) },
-+	{ "mx25l3255e",  INFO(0xc29e16, 0, 64 * 1024,  64, SECT_4K) },
-+	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, 0) },
-+	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
-+	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
-+	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) },
-+	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
-+	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_QUAD_READ) },
-+	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
-+
-+	/* Micron */
-+	{ "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128, 0) },
-+	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256, 0) },
-+	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256, 0) },
-+	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K) },
-+	{ "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K) },
-+	{ "n25q512ax3",  INFO(0x20ba20, 0, 64 * 1024, 1024, USE_FSR) },
-+	{ "n25q00",      INFO(0x20ba21, 0, 64 * 1024, 2048, USE_FSR) },
-+
-+	/* PMC */
-+	{ "pm25lv512",   INFO(0,        0, 32 * 1024,    2, SECT_4K_PMC) },
-+	{ "pm25lv010",   INFO(0,        0, 32 * 1024,    4, SECT_4K_PMC) },
-+	{ "pm25lq032",   INFO(0x7f9d46, 0, 64 * 1024,   64, SECT_4K) },
-+
-+	/* Spansion -- single (large) sector size only, at least
-+	 * for the chips listed here (without boot sectors).
-+	 */
-+	{ "s25sl032p",  INFO(0x010215, 0x4d00,  64 * 1024,  64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-+	{ "s25sl064p",  INFO(0x010216, 0x4d00,  64 * 1024, 128, 0) },
-+	{ "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) },
-+	{ "s25fl256s1", INFO(0x010219, 0x4d01,  64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-+	{ "s25fl512s",  INFO(0x010220, 0x4d00, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-+	{ "s70fl01gs",  INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
-+	{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024,  64, 0) },
-+	{ "s25sl12801", INFO(0x012018, 0x0301,  64 * 1024, 256, 0) },
-+	{ "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024,  64, 0) },
-+	{ "s25fl129p1", INFO(0x012018, 0x4d01,  64 * 1024, 256, 0) },
-+	{ "s25sl004a",  INFO(0x010212,      0,  64 * 1024,   8, 0) },
-+	{ "s25sl008a",  INFO(0x010213,      0,  64 * 1024,  16, 0) },
-+	{ "s25sl016a",  INFO(0x010214,      0,  64 * 1024,  32, 0) },
-+	{ "s25sl032a",  INFO(0x010215,      0,  64 * 1024,  64, 0) },
-+	{ "s25sl064a",  INFO(0x010216,      0,  64 * 1024, 128, 0) },
-+	{ "s25fl008k",  INFO(0xef4014,      0,  64 * 1024,  16, SECT_4K) },
-+	{ "s25fl016k",  INFO(0xef4015,      0,  64 * 1024,  32, SECT_4K) },
-+	{ "s25fl064k",  INFO(0xef4017,      0,  64 * 1024, 128, SECT_4K) },
-+
-+	/* SST -- large erase sizes are "overlays", "sectors" are 4K */
-+	{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024,  8, SECT_4K | SST_WRITE) },
-+	{ "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
-+	{ "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32, SECT_4K | SST_WRITE) },
-+	{ "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64, SECT_4K | SST_WRITE) },
-+	{ "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128, SECT_4K) },
-+	{ "sst25wf512",  INFO(0xbf2501, 0, 64 * 1024,  1, SECT_4K | SST_WRITE) },
-+	{ "sst25wf010",  INFO(0xbf2502, 0, 64 * 1024,  2, SECT_4K | SST_WRITE) },
-+	{ "sst25wf020",  INFO(0xbf2503, 0, 64 * 1024,  4, SECT_4K | SST_WRITE) },
-+	{ "sst25wf040",  INFO(0xbf2504, 0, 64 * 1024,  8, SECT_4K | SST_WRITE) },
-+
-+	/* ST Microelectronics -- newer production may have feature updates */
-+	{ "m25p05",  INFO(0x202010,  0,  32 * 1024,   2, 0) },
-+	{ "m25p10",  INFO(0x202011,  0,  32 * 1024,   4, 0) },
-+	{ "m25p20",  INFO(0x202012,  0,  64 * 1024,   4, 0) },
-+	{ "m25p40",  INFO(0x202013,  0,  64 * 1024,   8, 0) },
-+	{ "m25p80",  INFO(0x202014,  0,  64 * 1024,  16, 0) },
-+	{ "m25p16",  INFO(0x202015,  0,  64 * 1024,  32, 0) },
-+	{ "m25p32",  INFO(0x202016,  0,  64 * 1024,  64, 0) },
-+	{ "m25p64",  INFO(0x202017,  0,  64 * 1024, 128, 0) },
-+	{ "m25p128", INFO(0x202018,  0, 256 * 1024,  64, 0) },
-+	{ "n25q032", INFO(0x20ba16,  0,  64 * 1024,  64, 0) },
-+
-+	{ "m25p05-nonjedec",  INFO(0, 0,  32 * 1024,   2, 0) },
-+	{ "m25p10-nonjedec",  INFO(0, 0,  32 * 1024,   4, 0) },
-+	{ "m25p20-nonjedec",  INFO(0, 0,  64 * 1024,   4, 0) },
-+	{ "m25p40-nonjedec",  INFO(0, 0,  64 * 1024,   8, 0) },
-+	{ "m25p80-nonjedec",  INFO(0, 0,  64 * 1024,  16, 0) },
-+	{ "m25p16-nonjedec",  INFO(0, 0,  64 * 1024,  32, 0) },
-+	{ "m25p32-nonjedec",  INFO(0, 0,  64 * 1024,  64, 0) },
-+	{ "m25p64-nonjedec",  INFO(0, 0,  64 * 1024, 128, 0) },
-+	{ "m25p128-nonjedec", INFO(0, 0, 256 * 1024,  64, 0) },
-+
-+	{ "m45pe10", INFO(0x204011,  0, 64 * 1024,    2, 0) },
-+	{ "m45pe80", INFO(0x204014,  0, 64 * 1024,   16, 0) },
-+	{ "m45pe16", INFO(0x204015,  0, 64 * 1024,   32, 0) },
-+
-+	{ "m25pe20", INFO(0x208012,  0, 64 * 1024,  4,       0) },
-+	{ "m25pe80", INFO(0x208014,  0, 64 * 1024, 16,       0) },
-+	{ "m25pe16", INFO(0x208015,  0, 64 * 1024, 32, SECT_4K) },
-+
-+	{ "m25px16",    INFO(0x207115,  0, 64 * 1024, 32, SECT_4K) },
-+	{ "m25px32",    INFO(0x207116,  0, 64 * 1024, 64, SECT_4K) },
-+	{ "m25px32-s0", INFO(0x207316,  0, 64 * 1024, 64, SECT_4K) },
-+	{ "m25px32-s1", INFO(0x206316,  0, 64 * 1024, 64, SECT_4K) },
-+	{ "m25px64",    INFO(0x207117,  0, 64 * 1024, 128, 0) },
-+
-+	/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
-+	{ "w25x10", INFO(0xef3011, 0, 64 * 1024,  2,  SECT_4K) },
-+	{ "w25x20", INFO(0xef3012, 0, 64 * 1024,  4,  SECT_4K) },
-+	{ "w25x40", INFO(0xef3013, 0, 64 * 1024,  8,  SECT_4K) },
-+	{ "w25x80", INFO(0xef3014, 0, 64 * 1024,  16, SECT_4K) },
-+	{ "w25x16", INFO(0xef3015, 0, 64 * 1024,  32, SECT_4K) },
-+	{ "w25x32", INFO(0xef3016, 0, 64 * 1024,  64, SECT_4K) },
-+	{ "w25q32", INFO(0xef4016, 0, 64 * 1024,  64, SECT_4K) },
-+	{ "w25q32dw", INFO(0xef6016, 0, 64 * 1024,  64, SECT_4K) },
-+	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
-+	{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
-+	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
-+	{ "w25q80", INFO(0xef5014, 0, 64 * 1024,  16, SECT_4K) },
-+	{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024,  16, SECT_4K) },
-+	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
-+	{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K) },
-+
-+	/* Catalyst / On Semiconductor -- non-JEDEC */
-+	{ "cat25c11", CAT25_INFO(  16, 8, 16, 1, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-+	{ "cat25c03", CAT25_INFO(  32, 8, 16, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-+	{ "cat25c09", CAT25_INFO( 128, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-+	{ "cat25c17", CAT25_INFO( 256, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-+	{ "cat25128", CAT25_INFO(2048, 8, 64, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-+	{ },
-+};
-+EXPORT_SYMBOL_GPL(spi_nor_ids);
-+
-+static const struct spi_device_id *spi_nor_read_id(struct spi_nor *nor)
-+{
-+	int			tmp;
-+	u8			id[5];
-+	u32			jedec;
-+	u16                     ext_jedec;
-+	struct flash_info	*info;
-+
-+	tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, 5);
-+	if (tmp < 0) {
-+		dev_dbg(nor->dev, " error %d reading JEDEC ID\n", tmp);
-+		return ERR_PTR(tmp);
-+	}
-+	jedec = id[0];
-+	jedec = jedec << 8;
-+	jedec |= id[1];
-+	jedec = jedec << 8;
-+	jedec |= id[2];
-+
-+	ext_jedec = id[3] << 8 | id[4];
-+
-+	for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
-+		info = (void *)spi_nor_ids[tmp].driver_data;
-+		if (info->jedec_id == jedec) {
-+			if (info->ext_id == 0 || info->ext_id == ext_jedec)
-+				return &spi_nor_ids[tmp];
-+		}
-+	}
-+	dev_err(nor->dev, "unrecognized JEDEC id %06x\n", jedec);
-+	return ERR_PTR(-ENODEV);
-+}
-+
-+static const struct spi_device_id *jedec_probe(struct spi_nor *nor)
-+{
-+	return nor->read_id(nor);
-+}
-+
-+static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len,
-+			size_t *retlen, u_char *buf)
-+{
-+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
-+	int ret;
-+
-+	dev_dbg(nor->dev, "from 0x%08x, len %zd\n", (u32)from, len);
-+
-+	ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_READ);
-+	if (ret)
-+		return ret;
-+
-+	ret = nor->read(nor, from, len, retlen, buf);
-+
-+	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_READ);
-+	return ret;
-+}
-+
-+static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
-+		size_t *retlen, const u_char *buf)
-+{
-+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
-+	size_t actual;
-+	int ret;
-+
-+	dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
-+
-+	ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_WRITE);
-+	if (ret)
-+		return ret;
-+
-+	/* Wait until finished previous write command. */
-+	ret = wait_till_ready(nor);
-+	if (ret)
-+		goto time_out;
-+
-+	write_enable(nor);
-+
-+	nor->sst_write_second = false;
-+
-+	actual = to % 2;
-+	/* Start write from odd address. */
-+	if (actual) {
-+		nor->program_opcode = SPINOR_OP_BP;
-+
-+		/* write one byte. */
-+		nor->write(nor, to, 1, retlen, buf);
-+		ret = wait_till_ready(nor);
-+		if (ret)
-+			goto time_out;
-+	}
-+	to += actual;
-+
-+	/* Write out most of the data here. */
-+	for (; actual < len - 1; actual += 2) {
-+		nor->program_opcode = SPINOR_OP_AAI_WP;
-+
-+		/* write two bytes. */
-+		nor->write(nor, to, 2, retlen, buf + actual);
-+		ret = wait_till_ready(nor);
-+		if (ret)
-+			goto time_out;
-+		to += 2;
-+		nor->sst_write_second = true;
-+	}
-+	nor->sst_write_second = false;
-+
-+	write_disable(nor);
-+	ret = wait_till_ready(nor);
-+	if (ret)
-+		goto time_out;
-+
-+	/* Write out trailing byte if it exists. */
-+	if (actual != len) {
-+		write_enable(nor);
-+
-+		nor->program_opcode = SPINOR_OP_BP;
-+		nor->write(nor, to, 1, retlen, buf + actual);
-+
-+		ret = wait_till_ready(nor);
-+		if (ret)
-+			goto time_out;
-+		write_disable(nor);
-+	}
-+time_out:
-+	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
-+	return ret;
-+}
-+
-+/*
-+ * Write an address range to the nor chip.  Data must be written in
-+ * FLASH_PAGESIZE chunks.  The address range may be any size provided
-+ * it is within the physical boundaries.
-+ */
-+static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
-+	size_t *retlen, const u_char *buf)
-+{
-+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
-+	u32 page_offset, page_size, i;
-+	int ret;
-+
-+	dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
-+
-+	ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_WRITE);
-+	if (ret)
-+		return ret;
-+
-+	/* Wait until finished previous write command. */
-+	ret = wait_till_ready(nor);
-+	if (ret)
-+		goto write_err;
-+
-+	write_enable(nor);
-+
-+	page_offset = to & (nor->page_size - 1);
-+
-+	/* do all the bytes fit onto one page? */
-+	if (page_offset + len <= nor->page_size) {
-+		nor->write(nor, to, len, retlen, buf);
-+	} else {
-+		/* the size of data remaining on the first page */
-+		page_size = nor->page_size - page_offset;
-+		nor->write(nor, to, page_size, retlen, buf);
-+
-+		/* write everything in nor->page_size chunks */
-+		for (i = page_size; i < len; i += page_size) {
-+			page_size = len - i;
-+			if (page_size > nor->page_size)
-+				page_size = nor->page_size;
-+
-+			wait_till_ready(nor);
-+			write_enable(nor);
-+
-+			nor->write(nor, to + i, page_size, retlen, buf + i);
-+		}
-+	}
-+
-+write_err:
-+	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
-+	return 0;
-+}
-+
-+static int macronix_quad_enable(struct spi_nor *nor)
-+{
-+	int ret, val;
-+
-+	val = read_sr(nor);
-+	write_enable(nor);
-+
-+	nor->cmd_buf[0] = val | SR_QUAD_EN_MX;
-+	nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1, 0);
-+
-+	if (wait_till_ready(nor))
-+		return 1;
-+
-+	ret = read_sr(nor);
-+	if (!(ret > 0 && (ret & SR_QUAD_EN_MX))) {
-+		dev_err(nor->dev, "Macronix Quad bit not set\n");
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+/*
-+ * Write status Register and configuration register with 2 bytes
-+ * The first byte will be written to the status register, while the
-+ * second byte will be written to the configuration register.
-+ * Return negative if error occured.
-+ */
-+static int write_sr_cr(struct spi_nor *nor, u16 val)
-+{
-+	nor->cmd_buf[0] = val & 0xff;
-+	nor->cmd_buf[1] = (val >> 8);
-+
-+	return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 2, 0);
-+}
-+
-+static int spansion_quad_enable(struct spi_nor *nor)
-+{
-+	int ret;
-+	int quad_en = CR_QUAD_EN_SPAN << 8;
-+
-+	write_enable(nor);
-+
-+	ret = write_sr_cr(nor, quad_en);
-+	if (ret < 0) {
-+		dev_err(nor->dev,
-+			"error while writing configuration register\n");
-+		return -EINVAL;
-+	}
-+
-+	/* read back and check it */
-+	ret = read_cr(nor);
-+	if (!(ret > 0 && (ret & CR_QUAD_EN_SPAN))) {
-+		dev_err(nor->dev, "Spansion Quad bit not set\n");
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+static int set_quad_mode(struct spi_nor *nor, u32 jedec_id)
-+{
-+	int status;
-+
-+	switch (JEDEC_MFR(jedec_id)) {
-+	case CFI_MFR_MACRONIX:
-+		status = macronix_quad_enable(nor);
-+		if (status) {
-+			dev_err(nor->dev, "Macronix quad-read not enabled\n");
-+			return -EINVAL;
-+		}
-+		return status;
-+	default:
-+		status = spansion_quad_enable(nor);
-+		if (status) {
-+			dev_err(nor->dev, "Spansion quad-read not enabled\n");
-+			return -EINVAL;
-+		}
-+		return status;
-+	}
-+}
-+
-+static int spi_nor_check(struct spi_nor *nor)
-+{
-+	if (!nor->dev || !nor->read || !nor->write ||
-+		!nor->read_reg || !nor->write_reg || !nor->erase) {
-+		pr_err("spi-nor: please fill all the necessary fields!\n");
-+		return -EINVAL;
-+	}
-+
-+	if (!nor->read_id)
-+		nor->read_id = spi_nor_read_id;
-+	if (!nor->wait_till_ready)
-+		nor->wait_till_ready = spi_nor_wait_till_ready;
-+
-+	return 0;
-+}
-+
-+int spi_nor_scan(struct spi_nor *nor, const struct spi_device_id *id,
-+			enum read_mode mode)
-+{
-+	struct flash_info		*info;
-+	struct flash_platform_data	*data;
-+	struct device *dev = nor->dev;
-+	struct mtd_info *mtd = nor->mtd;
-+	struct device_node *np = dev->of_node;
-+	int ret;
-+	int i;
-+
-+	ret = spi_nor_check(nor);
-+	if (ret)
-+		return ret;
-+
-+	/* Platform data helps sort out which chip type we have, as
-+	 * well as how this board partitions it.  If we don't have
-+	 * a chip ID, try the JEDEC id commands; they'll work for most
-+	 * newer chips, even if we don't recognize the particular chip.
-+	 */
-+	data = dev_get_platdata(dev);
-+	if (data && data->type) {
-+		const struct spi_device_id *plat_id;
-+
-+		for (i = 0; i < ARRAY_SIZE(spi_nor_ids) - 1; i++) {
-+			plat_id = &spi_nor_ids[i];
-+			if (strcmp(data->type, plat_id->name))
-+				continue;
-+			break;
-+		}
-+
-+		if (i < ARRAY_SIZE(spi_nor_ids) - 1)
-+			id = plat_id;
-+		else
-+			dev_warn(dev, "unrecognized id %s\n", data->type);
-+	}
-+
-+	info = (void *)id->driver_data;
-+
-+	if (info->jedec_id) {
-+		const struct spi_device_id *jid;
-+
-+		jid = jedec_probe(nor);
-+		if (IS_ERR(jid)) {
-+			return PTR_ERR(jid);
-+		} else if (jid != id) {
-+			/*
-+			 * JEDEC knows better, so overwrite platform ID. We
-+			 * can't trust partitions any longer, but we'll let
-+			 * mtd apply them anyway, since some partitions may be
-+			 * marked read-only, and we don't want to lose that
-+			 * information, even if it's not 100% accurate.
-+			 */
-+			dev_warn(dev, "found %s, expected %s\n",
-+				 jid->name, id->name);
-+			id = jid;
-+			info = (void *)jid->driver_data;
-+		}
-+	}
-+
-+	mutex_init(&nor->lock);
-+
-+	/*
-+	 * Atmel, SST and Intel/Numonyx serial nor tend to power
-+	 * up with the software protection bits set
-+	 */
-+
-+	if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ATMEL ||
-+	    JEDEC_MFR(info->jedec_id) == CFI_MFR_INTEL ||
-+	    JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) {
-+		write_enable(nor);
-+		write_sr(nor, 0);
-+	}
-+
-+	if (data && data->name)
-+		mtd->name = data->name;
-+	else
-+		mtd->name = dev_name(dev);
-+
-+	mtd->type = MTD_NORFLASH;
-+	mtd->writesize = 1;
-+	mtd->flags = MTD_CAP_NORFLASH;
-+	mtd->size = info->sector_size * info->n_sectors;
-+	mtd->_erase = spi_nor_erase;
-+	mtd->_read = spi_nor_read;
-+
-+	/* nor protection support for STmicro chips */
-+	if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ST) {
-+		mtd->_lock = spi_nor_lock;
-+		mtd->_unlock = spi_nor_unlock;
-+	}
-+
-+	/* sst nor chips use AAI word program */
-+	if (info->flags & SST_WRITE)
-+		mtd->_write = sst_write;
-+	else
-+		mtd->_write = spi_nor_write;
-+
-+	if ((info->flags & USE_FSR) &&
-+	    nor->wait_till_ready == spi_nor_wait_till_ready)
-+		nor->wait_till_ready = spi_nor_wait_till_fsr_ready;
-+
-+	/* prefer "small sector" erase if possible */
-+	if (info->flags & SECT_4K) {
-+		nor->erase_opcode = SPINOR_OP_BE_4K;
-+		mtd->erasesize = 4096;
-+	} else if (info->flags & SECT_4K_PMC) {
-+		nor->erase_opcode = SPINOR_OP_BE_4K_PMC;
-+		mtd->erasesize = 4096;
-+	} else {
-+		nor->erase_opcode = SPINOR_OP_SE;
-+		mtd->erasesize = info->sector_size;
-+	}
-+
-+	if (info->flags & SPI_NOR_NO_ERASE)
-+		mtd->flags |= MTD_NO_ERASE;
-+
-+	mtd->dev.parent = dev;
-+	nor->page_size = info->page_size;
-+	mtd->writebufsize = nor->page_size;
-+
-+	if (np) {
-+		/* If we were instantiated by DT, use it */
-+		if (of_property_read_bool(np, "m25p,fast-read"))
-+			nor->flash_read = SPI_NOR_FAST;
-+		else
-+			nor->flash_read = SPI_NOR_NORMAL;
-+	} else {
-+		/* If we weren't instantiated by DT, default to fast-read */
-+		nor->flash_read = SPI_NOR_FAST;
-+	}
-+
-+	/* Some devices cannot do fast-read, no matter what DT tells us */
-+	if (info->flags & SPI_NOR_NO_FR)
-+		nor->flash_read = SPI_NOR_NORMAL;
-+
-+	/* Quad/Dual-read mode takes precedence over fast/normal */
-+	if (mode == SPI_NOR_QUAD && info->flags & SPI_NOR_QUAD_READ) {
-+		ret = set_quad_mode(nor, info->jedec_id);
-+		if (ret) {
-+			dev_err(dev, "quad mode not supported\n");
-+			return ret;
-+		}
-+		nor->flash_read = SPI_NOR_QUAD;
-+	} else if (mode == SPI_NOR_DUAL && info->flags & SPI_NOR_DUAL_READ) {
-+		nor->flash_read = SPI_NOR_DUAL;
-+	}
-+
-+	/* Default commands */
-+	switch (nor->flash_read) {
-+	case SPI_NOR_QUAD:
-+		nor->read_opcode = SPINOR_OP_READ_1_1_4;
-+		break;
-+	case SPI_NOR_DUAL:
-+		nor->read_opcode = SPINOR_OP_READ_1_1_2;
-+		break;
-+	case SPI_NOR_FAST:
-+		nor->read_opcode = SPINOR_OP_READ_FAST;
-+		break;
-+	case SPI_NOR_NORMAL:
-+		nor->read_opcode = SPINOR_OP_READ;
-+		break;
-+	default:
-+		dev_err(dev, "No Read opcode defined\n");
-+		return -EINVAL;
-+	}
-+
-+	nor->program_opcode = SPINOR_OP_PP;
-+
-+	if (info->addr_width)
-+		nor->addr_width = info->addr_width;
-+	else if (mtd->size > 0x1000000) {
-+		/* enable 4-byte addressing if the device exceeds 16MiB */
-+		nor->addr_width = 4;
-+		if (JEDEC_MFR(info->jedec_id) == CFI_MFR_AMD) {
-+			/* Dedicated 4-byte command set */
-+			switch (nor->flash_read) {
-+			case SPI_NOR_QUAD:
-+				nor->read_opcode = SPINOR_OP_READ4_1_1_4;
-+				break;
-+			case SPI_NOR_DUAL:
-+				nor->read_opcode = SPINOR_OP_READ4_1_1_2;
-+				break;
-+			case SPI_NOR_FAST:
-+				nor->read_opcode = SPINOR_OP_READ4_FAST;
-+				break;
-+			case SPI_NOR_NORMAL:
-+				nor->read_opcode = SPINOR_OP_READ4;
-+				break;
-+			}
-+			nor->program_opcode = SPINOR_OP_PP_4B;
-+			/* No small sector erase for 4-byte command set */
-+			nor->erase_opcode = SPINOR_OP_SE_4B;
-+			mtd->erasesize = info->sector_size;
-+		} else
-+			set_4byte(nor, info->jedec_id, 1);
-+	} else {
-+		nor->addr_width = 3;
-+	}
-+
-+	nor->read_dummy = spi_nor_read_dummy_cycles(nor);
-+
-+	dev_info(dev, "%s (%lld Kbytes)\n", id->name,
-+			(long long)mtd->size >> 10);
-+
-+	dev_dbg(dev,
-+		"mtd .name = %s, .size = 0x%llx (%lldMiB), "
-+		".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
-+		mtd->name, (long long)mtd->size, (long long)(mtd->size >> 20),
-+		mtd->erasesize, mtd->erasesize / 1024, mtd->numeraseregions);
-+
-+	if (mtd->numeraseregions)
-+		for (i = 0; i < mtd->numeraseregions; i++)
-+			dev_dbg(dev,
-+				"mtd.eraseregions[%d] = { .offset = 0x%llx, "
-+				".erasesize = 0x%.8x (%uKiB), "
-+				".numblocks = %d }\n",
-+				i, (long long)mtd->eraseregions[i].offset,
-+				mtd->eraseregions[i].erasesize,
-+				mtd->eraseregions[i].erasesize / 1024,
-+				mtd->eraseregions[i].numblocks);
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(spi_nor_scan);
-+
-+const struct spi_device_id *spi_nor_match_id(char *name)
-+{
-+	const struct spi_device_id *id = spi_nor_ids;
-+
-+	while (id->name[0]) {
-+		if (!strcmp(name, id->name))
-+			return id;
-+		id++;
-+	}
-+	return NULL;
-+}
-+EXPORT_SYMBOL_GPL(spi_nor_match_id);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Huang Shijie <shijie8@gmail.com>");
-+MODULE_AUTHOR("Mike Lavender");
-+MODULE_DESCRIPTION("framework for SPI NOR");
---- /dev/null
-+++ b/include/linux/mtd/spi-nor.h
-@@ -0,0 +1,218 @@
-+/*
-+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef __LINUX_MTD_SPI_NOR_H
-+#define __LINUX_MTD_SPI_NOR_H
-+
-+/*
-+ * Note on opcode nomenclature: some opcodes have a format like
-+ * SPINOR_OP_FUNCTION{4,}_x_y_z. The numbers x, y, and z stand for the number
-+ * of I/O lines used for the opcode, address, and data (respectively). The
-+ * FUNCTION has an optional suffix of '4', to represent an opcode which
-+ * requires a 4-byte (32-bit) address.
-+ */
-+
-+/* Flash opcodes. */
-+#define SPINOR_OP_WREN		0x06	/* Write enable */
-+#define SPINOR_OP_RDSR		0x05	/* Read status register */
-+#define SPINOR_OP_WRSR		0x01	/* Write status register 1 byte */
-+#define SPINOR_OP_READ		0x03	/* Read data bytes (low frequency) */
-+#define SPINOR_OP_READ_FAST	0x0b	/* Read data bytes (high frequency) */
-+#define SPINOR_OP_READ_1_1_2	0x3b	/* Read data bytes (Dual SPI) */
-+#define SPINOR_OP_READ_1_1_4	0x6b	/* Read data bytes (Quad SPI) */
-+#define SPINOR_OP_PP		0x02	/* Page program (up to 256 bytes) */
-+#define SPINOR_OP_BE_4K		0x20	/* Erase 4KiB block */
-+#define SPINOR_OP_BE_4K_PMC	0xd7	/* Erase 4KiB block on PMC chips */
-+#define SPINOR_OP_BE_32K	0x52	/* Erase 32KiB block */
-+#define SPINOR_OP_CHIP_ERASE	0xc7	/* Erase whole flash chip */
-+#define SPINOR_OP_SE		0xd8	/* Sector erase (usually 64KiB) */
-+#define SPINOR_OP_RDID		0x9f	/* Read JEDEC ID */
-+#define SPINOR_OP_RDCR		0x35	/* Read configuration register */
-+#define SPINOR_OP_RDFSR		0x70	/* Read flag status register */
-+
-+/* 4-byte address opcodes - used on Spansion and some Macronix flashes. */
-+#define SPINOR_OP_READ4		0x13	/* Read data bytes (low frequency) */
-+#define SPINOR_OP_READ4_FAST	0x0c	/* Read data bytes (high frequency) */
-+#define SPINOR_OP_READ4_1_1_2	0x3c	/* Read data bytes (Dual SPI) */
-+#define SPINOR_OP_READ4_1_1_4	0x6c	/* Read data bytes (Quad SPI) */
-+#define SPINOR_OP_PP_4B		0x12	/* Page program (up to 256 bytes) */
-+#define SPINOR_OP_SE_4B		0xdc	/* Sector erase (usually 64KiB) */
-+
-+/* Used for SST flashes only. */
-+#define SPINOR_OP_BP		0x02	/* Byte program */
-+#define SPINOR_OP_WRDI		0x04	/* Write disable */
-+#define SPINOR_OP_AAI_WP	0xad	/* Auto address increment word program */
-+
-+/* Used for Macronix and Winbond flashes. */
-+#define SPINOR_OP_EN4B		0xb7	/* Enter 4-byte mode */
-+#define SPINOR_OP_EX4B		0xe9	/* Exit 4-byte mode */
-+
-+/* Used for Spansion flashes only. */
-+#define SPINOR_OP_BRWR		0x17	/* Bank register write */
-+
-+/* Status Register bits. */
-+#define SR_WIP			1	/* Write in progress */
-+#define SR_WEL			2	/* Write enable latch */
-+/* meaning of other SR_* bits may differ between vendors */
-+#define SR_BP0			4	/* Block protect 0 */
-+#define SR_BP1			8	/* Block protect 1 */
-+#define SR_BP2			0x10	/* Block protect 2 */
-+#define SR_SRWD			0x80	/* SR write protect */
-+
-+#define SR_QUAD_EN_MX		0x40	/* Macronix Quad I/O */
-+
-+/* Flag Status Register bits */
-+#define FSR_READY		0x80
-+
-+/* Configuration Register bits. */
-+#define CR_QUAD_EN_SPAN		0x2	/* Spansion Quad I/O */
-+
-+enum read_mode {
-+	SPI_NOR_NORMAL = 0,
-+	SPI_NOR_FAST,
-+	SPI_NOR_DUAL,
-+	SPI_NOR_QUAD,
-+};
-+
-+/**
-+ * struct spi_nor_xfer_cfg - Structure for defining a Serial Flash transfer
-+ * @wren:		command for "Write Enable", or 0x00 for not required
-+ * @cmd:		command for operation
-+ * @cmd_pins:		number of pins to send @cmd (1, 2, 4)
-+ * @addr:		address for operation
-+ * @addr_pins:		number of pins to send @addr (1, 2, 4)
-+ * @addr_width:		number of address bytes
-+ *			(3,4, or 0 for address not required)
-+ * @mode:		mode data
-+ * @mode_pins:		number of pins to send @mode (1, 2, 4)
-+ * @mode_cycles:	number of mode cycles (0 for mode not required)
-+ * @dummy_cycles:	number of dummy cycles (0 for dummy not required)
-+ */
-+struct spi_nor_xfer_cfg {
-+	u8		wren;
-+	u8		cmd;
-+	u8		cmd_pins;
-+	u32		addr;
-+	u8		addr_pins;
-+	u8		addr_width;
-+	u8		mode;
-+	u8		mode_pins;
-+	u8		mode_cycles;
-+	u8		dummy_cycles;
-+};
-+
-+#define SPI_NOR_MAX_CMD_SIZE	8
-+enum spi_nor_ops {
-+	SPI_NOR_OPS_READ = 0,
-+	SPI_NOR_OPS_WRITE,
-+	SPI_NOR_OPS_ERASE,
-+	SPI_NOR_OPS_LOCK,
-+	SPI_NOR_OPS_UNLOCK,
-+};
-+
-+/**
-+ * struct spi_nor - Structure for defining a the SPI NOR layer
-+ * @mtd:		point to a mtd_info structure
-+ * @lock:		the lock for the read/write/erase/lock/unlock operations
-+ * @dev:		point to a spi device, or a spi nor controller device.
-+ * @page_size:		the page size of the SPI NOR
-+ * @addr_width:		number of address bytes
-+ * @erase_opcode:	the opcode for erasing a sector
-+ * @read_opcode:	the read opcode
-+ * @read_dummy:		the dummy needed by the read operation
-+ * @program_opcode:	the program opcode
-+ * @flash_read:		the mode of the read
-+ * @sst_write_second:	used by the SST write operation
-+ * @cfg:		used by the read_xfer/write_xfer
-+ * @cmd_buf:		used by the write_reg
-+ * @prepare:		[OPTIONAL] do some preparations for the
-+ *			read/write/erase/lock/unlock operations
-+ * @unprepare:		[OPTIONAL] do some post work after the
-+ *			read/write/erase/lock/unlock operations
-+ * @read_xfer:		[OPTIONAL] the read fundamental primitive
-+ * @write_xfer:		[OPTIONAL] the writefundamental primitive
-+ * @read_reg:		[DRIVER-SPECIFIC] read out the register
-+ * @write_reg:		[DRIVER-SPECIFIC] write data to the register
-+ * @read_id:		[REPLACEABLE] read out the ID data, and find
-+ *			the proper spi_device_id
-+ * @wait_till_ready:	[REPLACEABLE] wait till the NOR becomes ready
-+ * @read:		[DRIVER-SPECIFIC] read data from the SPI NOR
-+ * @write:		[DRIVER-SPECIFIC] write data to the SPI NOR
-+ * @erase:		[DRIVER-SPECIFIC] erase a sector of the SPI NOR
-+ *			at the offset @offs
-+ * @priv:		the private data
-+ */
-+struct spi_nor {
-+	struct mtd_info		*mtd;
-+	struct mutex		lock;
-+	struct device		*dev;
-+	u32			page_size;
-+	u8			addr_width;
-+	u8			erase_opcode;
-+	u8			read_opcode;
-+	u8			read_dummy;
-+	u8			program_opcode;
-+	enum read_mode		flash_read;
-+	bool			sst_write_second;
-+	struct spi_nor_xfer_cfg	cfg;
-+	u8			cmd_buf[SPI_NOR_MAX_CMD_SIZE];
-+
-+	int (*prepare)(struct spi_nor *nor, enum spi_nor_ops ops);
-+	void (*unprepare)(struct spi_nor *nor, enum spi_nor_ops ops);
-+	int (*read_xfer)(struct spi_nor *nor, struct spi_nor_xfer_cfg *cfg,
-+			 u8 *buf, size_t len);
-+	int (*write_xfer)(struct spi_nor *nor, struct spi_nor_xfer_cfg *cfg,
-+			  u8 *buf, size_t len);
-+	int (*read_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len);
-+	int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len,
-+			int write_enable);
-+	const struct spi_device_id *(*read_id)(struct spi_nor *nor);
-+	int (*wait_till_ready)(struct spi_nor *nor);
-+
-+	int (*read)(struct spi_nor *nor, loff_t from,
-+			size_t len, size_t *retlen, u_char *read_buf);
-+	void (*write)(struct spi_nor *nor, loff_t to,
-+			size_t len, size_t *retlen, const u_char *write_buf);
-+	int (*erase)(struct spi_nor *nor, loff_t offs);
-+
-+	void *priv;
-+};
-+
-+/**
-+ * spi_nor_scan() - scan the SPI NOR
-+ * @nor:	the spi_nor structure
-+ * @id:		the spi_device_id provided by the driver
-+ * @mode:	the read mode supported by the driver
-+ *
-+ * The drivers can use this fuction to scan the SPI NOR.
-+ * In the scanning, it will try to get all the necessary information to
-+ * fill the mtd_info{} and the spi_nor{}.
-+ *
-+ * The board may assigns a spi_device_id with @id which be used to compared with
-+ * the spi_device_id detected by the scanning.
-+ *
-+ * Return: 0 for success, others for failure.
-+ */
-+int spi_nor_scan(struct spi_nor *nor, const struct spi_device_id *id,
-+			enum read_mode mode);
-+extern const struct spi_device_id spi_nor_ids[];
-+
-+/**
-+ * spi_nor_match_id() - find the spi_device_id by the name
-+ * @name:	the name of the spi_device_id
-+ *
-+ * The drivers use this function to find the spi_device_id
-+ * specified by the @name.
-+ *
-+ * Return: returns the right spi_device_id pointer on success,
-+ *         and returns NULL on failure.
-+ */
-+const struct spi_device_id *spi_nor_match_id(char *name);
-+
-+#endif
diff --git a/target/linux/bcm53xx/patches-3.14/002-mtd-spi-nor-from-3.18.patch b/target/linux/bcm53xx/patches-3.14/002-mtd-spi-nor-from-3.18.patch
deleted file mode 100644
index 873861a..0000000
--- a/target/linux/bcm53xx/patches-3.14/002-mtd-spi-nor-from-3.18.patch
+++ /dev/null
@@ -1,219 +0,0 @@
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -28,6 +28,8 @@
- 
- #define JEDEC_MFR(_jedec_id)	((_jedec_id) >> 16)
- 
-+static const struct spi_device_id *spi_nor_match_id(const char *name);
-+
- /*
-  * Read the status register, returning its value in the location
-  * Return the status register value.
-@@ -473,7 +475,7 @@ struct flash_info {
-  * more nor chips.  This current list focusses on newer chips, which
-  * have been converging on command sets which including JEDEC ID.
-  */
--const struct spi_device_id spi_nor_ids[] = {
-+static const struct spi_device_id spi_nor_ids[] = {
- 	/* Atmel -- some are (confusingly) marketed as "DataFlash" */
- 	{ "at25fs010",  INFO(0x1f6601, 0, 32 * 1024,   4, SECT_4K) },
- 	{ "at25fs040",  INFO(0x1f6604, 0, 64 * 1024,   8, SECT_4K) },
-@@ -611,6 +613,7 @@ const struct spi_device_id spi_nor_ids[]
- 	{ "m25px32-s0", INFO(0x207316,  0, 64 * 1024, 64, SECT_4K) },
- 	{ "m25px32-s1", INFO(0x206316,  0, 64 * 1024, 64, SECT_4K) },
- 	{ "m25px64",    INFO(0x207117,  0, 64 * 1024, 128, 0) },
-+	{ "m25px80",    INFO(0x207114,  0, 64 * 1024, 16, 0) },
- 
- 	/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
- 	{ "w25x10", INFO(0xef3011, 0, 64 * 1024,  2,  SECT_4K) },
-@@ -623,7 +626,6 @@ const struct spi_device_id spi_nor_ids[]
- 	{ "w25q32dw", INFO(0xef6016, 0, 64 * 1024,  64, SECT_4K) },
- 	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
- 	{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
--	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
- 	{ "w25q80", INFO(0xef5014, 0, 64 * 1024,  16, SECT_4K) },
- 	{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024,  16, SECT_4K) },
- 	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
-@@ -637,7 +639,6 @@ const struct spi_device_id spi_nor_ids[]
- 	{ "cat25128", CAT25_INFO(2048, 8, 64, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- 	{ },
- };
--EXPORT_SYMBOL_GPL(spi_nor_ids);
- 
- static const struct spi_device_id *spi_nor_read_id(struct spi_nor *nor)
- {
-@@ -671,11 +672,6 @@ static const struct spi_device_id *spi_n
- 	return ERR_PTR(-ENODEV);
- }
- 
--static const struct spi_device_id *jedec_probe(struct spi_nor *nor)
--{
--	return nor->read_id(nor);
--}
--
- static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len,
- 			size_t *retlen, u_char *buf)
- {
-@@ -916,11 +912,10 @@ static int spi_nor_check(struct spi_nor
- 	return 0;
- }
- 
--int spi_nor_scan(struct spi_nor *nor, const struct spi_device_id *id,
--			enum read_mode mode)
-+int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
- {
-+	const struct spi_device_id	*id = NULL;
- 	struct flash_info		*info;
--	struct flash_platform_data	*data;
- 	struct device *dev = nor->dev;
- 	struct mtd_info *mtd = nor->mtd;
- 	struct device_node *np = dev->of_node;
-@@ -931,34 +926,16 @@ int spi_nor_scan(struct spi_nor *nor, co
- 	if (ret)
- 		return ret;
- 
--	/* Platform data helps sort out which chip type we have, as
--	 * well as how this board partitions it.  If we don't have
--	 * a chip ID, try the JEDEC id commands; they'll work for most
--	 * newer chips, even if we don't recognize the particular chip.
--	 */
--	data = dev_get_platdata(dev);
--	if (data && data->type) {
--		const struct spi_device_id *plat_id;
--
--		for (i = 0; i < ARRAY_SIZE(spi_nor_ids) - 1; i++) {
--			plat_id = &spi_nor_ids[i];
--			if (strcmp(data->type, plat_id->name))
--				continue;
--			break;
--		}
--
--		if (i < ARRAY_SIZE(spi_nor_ids) - 1)
--			id = plat_id;
--		else
--			dev_warn(dev, "unrecognized id %s\n", data->type);
--	}
-+	id = spi_nor_match_id(name);
-+	if (!id)
-+		return -ENOENT;
- 
- 	info = (void *)id->driver_data;
- 
- 	if (info->jedec_id) {
- 		const struct spi_device_id *jid;
- 
--		jid = jedec_probe(nor);
-+		jid = nor->read_id(nor);
- 		if (IS_ERR(jid)) {
- 			return PTR_ERR(jid);
- 		} else if (jid != id) {
-@@ -990,11 +967,8 @@ int spi_nor_scan(struct spi_nor *nor, co
- 		write_sr(nor, 0);
- 	}
- 
--	if (data && data->name)
--		mtd->name = data->name;
--	else
-+	if (!mtd->name)
- 		mtd->name = dev_name(dev);
--
- 	mtd->type = MTD_NORFLASH;
- 	mtd->writesize = 1;
- 	mtd->flags = MTD_CAP_NORFLASH;
-@@ -1018,6 +992,7 @@ int spi_nor_scan(struct spi_nor *nor, co
- 	    nor->wait_till_ready == spi_nor_wait_till_ready)
- 		nor->wait_till_ready = spi_nor_wait_till_fsr_ready;
- 
-+#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
- 	/* prefer "small sector" erase if possible */
- 	if (info->flags & SECT_4K) {
- 		nor->erase_opcode = SPINOR_OP_BE_4K;
-@@ -1025,7 +1000,9 @@ int spi_nor_scan(struct spi_nor *nor, co
- 	} else if (info->flags & SECT_4K_PMC) {
- 		nor->erase_opcode = SPINOR_OP_BE_4K_PMC;
- 		mtd->erasesize = 4096;
--	} else {
-+	} else
-+#endif
-+	{
- 		nor->erase_opcode = SPINOR_OP_SE;
- 		mtd->erasesize = info->sector_size;
- 	}
-@@ -1141,7 +1118,7 @@ int spi_nor_scan(struct spi_nor *nor, co
- }
- EXPORT_SYMBOL_GPL(spi_nor_scan);
- 
--const struct spi_device_id *spi_nor_match_id(char *name)
-+static const struct spi_device_id *spi_nor_match_id(const char *name)
- {
- 	const struct spi_device_id *id = spi_nor_ids;
- 
-@@ -1152,7 +1129,6 @@ const struct spi_device_id *spi_nor_matc
- 	}
- 	return NULL;
- }
--EXPORT_SYMBOL_GPL(spi_nor_match_id);
- 
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Huang Shijie <shijie8@gmail.com>");
---- a/drivers/mtd/spi-nor/Kconfig
-+++ b/drivers/mtd/spi-nor/Kconfig
-@@ -7,6 +7,20 @@ menuconfig MTD_SPI_NOR
- 
- if MTD_SPI_NOR
- 
-+config MTD_SPI_NOR_USE_4K_SECTORS
-+	bool "Use small 4096 B erase sectors"
-+	default y
-+	help
-+	  Many flash memories support erasing small (4096 B) sectors. Depending
-+	  on the usage this feature may provide performance gain in comparison
-+	  to erasing whole blocks (32/64 KiB).
-+	  Changing a small part of the flash's contents is usually faster with
-+	  small sectors. On the other hand erasing should be faster when using
-+	  64 KiB block instead of 16 × 4 KiB sectors.
-+
-+	  Please note that some tools/drivers/filesystems may not work with
-+	  4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum).
-+
- config SPI_FSL_QUADSPI
- 	tristate "Freescale Quad SPI controller"
- 	depends on ARCH_MXC
---- a/include/linux/mtd/spi-nor.h
-+++ b/include/linux/mtd/spi-nor.h
-@@ -187,32 +187,17 @@ struct spi_nor {
- /**
-  * spi_nor_scan() - scan the SPI NOR
-  * @nor:	the spi_nor structure
-- * @id:		the spi_device_id provided by the driver
-+ * @name:	the chip type name
-  * @mode:	the read mode supported by the driver
-  *
-  * The drivers can use this fuction to scan the SPI NOR.
-  * In the scanning, it will try to get all the necessary information to
-  * fill the mtd_info{} and the spi_nor{}.
-  *
-- * The board may assigns a spi_device_id with @id which be used to compared with
-- * the spi_device_id detected by the scanning.
-+ * The chip type name can be provided through the @name parameter.
-  *
-  * Return: 0 for success, others for failure.
-  */
--int spi_nor_scan(struct spi_nor *nor, const struct spi_device_id *id,
--			enum read_mode mode);
--extern const struct spi_device_id spi_nor_ids[];
--
--/**
-- * spi_nor_match_id() - find the spi_device_id by the name
-- * @name:	the name of the spi_device_id
-- *
-- * The drivers use this function to find the spi_device_id
-- * specified by the @name.
-- *
-- * Return: returns the right spi_device_id pointer on success,
-- *         and returns NULL on failure.
-- */
--const struct spi_device_id *spi_nor_match_id(char *name);
-+int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode);
- 
- #endif
diff --git a/target/linux/bcm53xx/patches-3.14/003-mtd-spi-nor-from-3.19.patch b/target/linux/bcm53xx/patches-3.14/003-mtd-spi-nor-from-3.19.patch
deleted file mode 100644
index 5451b9c..0000000
--- a/target/linux/bcm53xx/patches-3.14/003-mtd-spi-nor-from-3.19.patch
+++ /dev/null
@@ -1,662 +0,0 @@
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -26,7 +26,38 @@
- /* Define max times to check status register before we give up. */
- #define	MAX_READY_WAIT_JIFFIES	(40 * HZ) /* M25P16 specs 40s max chip erase */
- 
--#define JEDEC_MFR(_jedec_id)	((_jedec_id) >> 16)
-+#define SPI_NOR_MAX_ID_LEN	6
-+
-+struct flash_info {
-+	/*
-+	 * This array stores the ID bytes.
-+	 * The first three bytes are the JEDIC ID.
-+	 * JEDEC ID zero means "no ID" (mostly older chips).
-+	 */
-+	u8		id[SPI_NOR_MAX_ID_LEN];
-+	u8		id_len;
-+
-+	/* The size listed here is what works with SPINOR_OP_SE, which isn't
-+	 * necessarily called a "sector" by the vendor.
-+	 */
-+	unsigned	sector_size;
-+	u16		n_sectors;
-+
-+	u16		page_size;
-+	u16		addr_width;
-+
-+	u16		flags;
-+#define	SECT_4K			0x01	/* SPINOR_OP_BE_4K works uniformly */
-+#define	SPI_NOR_NO_ERASE	0x02	/* No erase command needed */
-+#define	SST_WRITE		0x04	/* use SST byte programming */
-+#define	SPI_NOR_NO_FR		0x08	/* Can't do fastread */
-+#define	SECT_4K_PMC		0x10	/* SPINOR_OP_BE_4K_PMC works uniformly */
-+#define	SPI_NOR_DUAL_READ	0x20    /* Flash supports Dual Read */
-+#define	SPI_NOR_QUAD_READ	0x40    /* Flash supports Quad Read */
-+#define	USE_FSR			0x80	/* use flag status register */
-+};
-+
-+#define JEDEC_MFR(info)	((info)->id[0])
- 
- static const struct spi_device_id *spi_nor_match_id(const char *name);
- 
-@@ -98,7 +129,7 @@ static inline int spi_nor_read_dummy_cyc
- 	case SPI_NOR_FAST:
- 	case SPI_NOR_DUAL:
- 	case SPI_NOR_QUAD:
--		return 1;
-+		return 8;
- 	case SPI_NOR_NORMAL:
- 		return 0;
- 	}
-@@ -138,13 +169,14 @@ static inline struct spi_nor *mtd_to_spi
- }
- 
- /* Enable/disable 4-byte addressing mode. */
--static inline int set_4byte(struct spi_nor *nor, u32 jedec_id, int enable)
-+static inline int set_4byte(struct spi_nor *nor, struct flash_info *info,
-+			    int enable)
- {
- 	int status;
- 	bool need_wren = false;
- 	u8 cmd;
- 
--	switch (JEDEC_MFR(jedec_id)) {
-+	switch (JEDEC_MFR(info)) {
- 	case CFI_MFR_ST: /* Micron, actually */
- 		/* Some Micron need WREN command; all will accept it */
- 		need_wren = true;
-@@ -165,81 +197,74 @@ static inline int set_4byte(struct spi_n
- 		return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1, 0);
- 	}
- }
--
--static int spi_nor_wait_till_ready(struct spi_nor *nor)
-+static inline int spi_nor_sr_ready(struct spi_nor *nor)
- {
--	unsigned long deadline;
--	int sr;
--
--	deadline = jiffies + MAX_READY_WAIT_JIFFIES;
--
--	do {
--		cond_resched();
-+	int sr = read_sr(nor);
-+	if (sr < 0)
-+		return sr;
-+	else
-+		return !(sr & SR_WIP);
-+}
- 
--		sr = read_sr(nor);
--		if (sr < 0)
--			break;
--		else if (!(sr & SR_WIP))
--			return 0;
--	} while (!time_after_eq(jiffies, deadline));
-+static inline int spi_nor_fsr_ready(struct spi_nor *nor)
-+{
-+	int fsr = read_fsr(nor);
-+	if (fsr < 0)
-+		return fsr;
-+	else
-+		return fsr & FSR_READY;
-+}
- 
--	return -ETIMEDOUT;
-+static int spi_nor_ready(struct spi_nor *nor)
-+{
-+	int sr, fsr;
-+	sr = spi_nor_sr_ready(nor);
-+	if (sr < 0)
-+		return sr;
-+	fsr = nor->flags & SNOR_F_USE_FSR ? spi_nor_fsr_ready(nor) : 1;
-+	if (fsr < 0)
-+		return fsr;
-+	return sr && fsr;
- }
- 
--static int spi_nor_wait_till_fsr_ready(struct spi_nor *nor)
-+/*
-+ * Service routine to read status register until ready, or timeout occurs.
-+ * Returns non-zero if error.
-+ */
-+static int spi_nor_wait_till_ready(struct spi_nor *nor)
- {
- 	unsigned long deadline;
--	int sr;
--	int fsr;
-+	int timeout = 0, ret;
- 
- 	deadline = jiffies + MAX_READY_WAIT_JIFFIES;
- 
--	do {
-+	while (!timeout) {
-+		if (time_after_eq(jiffies, deadline))
-+			timeout = 1;
-+
-+		ret = spi_nor_ready(nor);
-+		if (ret < 0)
-+			return ret;
-+		if (ret)
-+			return 0;
-+
- 		cond_resched();
-+	}
- 
--		sr = read_sr(nor);
--		if (sr < 0) {
--			break;
--		} else if (!(sr & SR_WIP)) {
--			fsr = read_fsr(nor);
--			if (fsr < 0)
--				break;
--			if (fsr & FSR_READY)
--				return 0;
--		}
--	} while (!time_after_eq(jiffies, deadline));
-+	dev_err(nor->dev, "flash operation timed out\n");
- 
- 	return -ETIMEDOUT;
- }
- 
- /*
-- * Service routine to read status register until ready, or timeout occurs.
-- * Returns non-zero if error.
-- */
--static int wait_till_ready(struct spi_nor *nor)
--{
--	return nor->wait_till_ready(nor);
--}
--
--/*
-  * Erase the whole flash memory
-  *
-  * Returns 0 if successful, non-zero otherwise.
-  */
- static int erase_chip(struct spi_nor *nor)
- {
--	int ret;
--
- 	dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd->size >> 10));
- 
--	/* Wait until finished previous write command. */
--	ret = wait_till_ready(nor);
--	if (ret)
--		return ret;
--
--	/* Send write enable, then erase commands. */
--	write_enable(nor);
--
- 	return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0, 0);
- }
- 
-@@ -294,11 +319,17 @@ static int spi_nor_erase(struct mtd_info
- 
- 	/* whole-chip erase? */
- 	if (len == mtd->size) {
-+		write_enable(nor);
-+
- 		if (erase_chip(nor)) {
- 			ret = -EIO;
- 			goto erase_err;
- 		}
- 
-+		ret = spi_nor_wait_till_ready(nor);
-+		if (ret)
-+			goto erase_err;
-+
- 	/* REVISIT in some cases we could speed up erasing large regions
- 	 * by using SPINOR_OP_SE instead of SPINOR_OP_BE_4K.  We may have set up
- 	 * to use "small sector erase", but that's not always optimal.
-@@ -307,6 +338,8 @@ static int spi_nor_erase(struct mtd_info
- 	/* "sector"-at-a-time erase */
- 	} else {
- 		while (len) {
-+			write_enable(nor);
-+
- 			if (nor->erase(nor, addr)) {
- 				ret = -EIO;
- 				goto erase_err;
-@@ -314,9 +347,15 @@ static int spi_nor_erase(struct mtd_info
- 
- 			addr += mtd->erasesize;
- 			len -= mtd->erasesize;
-+
-+			ret = spi_nor_wait_till_ready(nor);
-+			if (ret)
-+				goto erase_err;
- 		}
- 	}
- 
-+	write_disable(nor);
-+
- 	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE);
- 
- 	instr->state = MTD_ERASE_DONE;
-@@ -341,11 +380,6 @@ static int spi_nor_lock(struct mtd_info
- 	if (ret)
- 		return ret;
- 
--	/* Wait until finished previous command */
--	ret = wait_till_ready(nor);
--	if (ret)
--		goto err;
--
- 	status_old = read_sr(nor);
- 
- 	if (offset < mtd->size - (mtd->size / 2))
-@@ -388,11 +422,6 @@ static int spi_nor_unlock(struct mtd_inf
- 	if (ret)
- 		return ret;
- 
--	/* Wait until finished previous command */
--	ret = wait_till_ready(nor);
--	if (ret)
--		goto err;
--
- 	status_old = read_sr(nor);
- 
- 	if (offset+len > mtd->size - (mtd->size / 64))
-@@ -424,38 +453,34 @@ err:
- 	return ret;
- }
- 
--struct flash_info {
--	/* JEDEC id zero means "no ID" (most older chips); otherwise it has
--	 * a high byte of zero plus three data bytes: the manufacturer id,
--	 * then a two byte device id.
--	 */
--	u32		jedec_id;
--	u16             ext_id;
--
--	/* The size listed here is what works with SPINOR_OP_SE, which isn't
--	 * necessarily called a "sector" by the vendor.
--	 */
--	unsigned	sector_size;
--	u16		n_sectors;
--
--	u16		page_size;
--	u16		addr_width;
--
--	u16		flags;
--#define	SECT_4K			0x01	/* SPINOR_OP_BE_4K works uniformly */
--#define	SPI_NOR_NO_ERASE	0x02	/* No erase command needed */
--#define	SST_WRITE		0x04	/* use SST byte programming */
--#define	SPI_NOR_NO_FR		0x08	/* Can't do fastread */
--#define	SECT_4K_PMC		0x10	/* SPINOR_OP_BE_4K_PMC works uniformly */
--#define	SPI_NOR_DUAL_READ	0x20    /* Flash supports Dual Read */
--#define	SPI_NOR_QUAD_READ	0x40    /* Flash supports Quad Read */
--#define	USE_FSR			0x80	/* use flag status register */
--};
--
-+/* Used when the "_ext_id" is two bytes at most */
- #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
- 	((kernel_ulong_t)&(struct flash_info) {				\
--		.jedec_id = (_jedec_id),				\
--		.ext_id = (_ext_id),					\
-+		.id = {							\
-+			((_jedec_id) >> 16) & 0xff,			\
-+			((_jedec_id) >> 8) & 0xff,			\
-+			(_jedec_id) & 0xff,				\
-+			((_ext_id) >> 8) & 0xff,			\
-+			(_ext_id) & 0xff,				\
-+			},						\
-+		.id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))),	\
-+		.sector_size = (_sector_size),				\
-+		.n_sectors = (_n_sectors),				\
-+		.page_size = 256,					\
-+		.flags = (_flags),					\
-+	})
-+
-+#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
-+	((kernel_ulong_t)&(struct flash_info) {				\
-+		.id = {							\
-+			((_jedec_id) >> 16) & 0xff,			\
-+			((_jedec_id) >> 8) & 0xff,			\
-+			(_jedec_id) & 0xff,				\
-+			((_ext_id) >> 16) & 0xff,			\
-+			((_ext_id) >> 8) & 0xff,			\
-+			(_ext_id) & 0xff,				\
-+			},						\
-+		.id_len = 6,						\
- 		.sector_size = (_sector_size),				\
- 		.n_sectors = (_n_sectors),				\
- 		.page_size = 256,					\
-@@ -507,6 +532,9 @@ static const struct spi_device_id spi_no
- 	{ "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- 	{ "mr25h10",  CAT25_INFO(128 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- 
-+	/* Fujitsu */
-+	{ "mb85rs1mt", INFO(0x047f27, 0, 128 * 1024, 1, SPI_NOR_NO_ERASE) },
-+
- 	/* GigaDevice */
- 	{ "gd25q32", INFO(0xc84016, 0, 64 * 1024,  64, SECT_4K) },
- 	{ "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) },
-@@ -532,6 +560,7 @@ static const struct spi_device_id spi_no
- 	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
- 
- 	/* Micron */
-+	{ "n25q032",	 INFO(0x20ba16, 0, 64 * 1024,   64, 0) },
- 	{ "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128, 0) },
- 	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256, 0) },
- 	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256, 0) },
-@@ -556,6 +585,7 @@ static const struct spi_device_id spi_no
- 	{ "s70fl01gs",  INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
- 	{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024,  64, 0) },
- 	{ "s25sl12801", INFO(0x012018, 0x0301,  64 * 1024, 256, 0) },
-+	{ "s25fl128s",	INFO6(0x012018, 0x4d0180, 64 * 1024, 256, SPI_NOR_QUAD_READ) },
- 	{ "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024,  64, 0) },
- 	{ "s25fl129p1", INFO(0x012018, 0x4d01,  64 * 1024, 256, 0) },
- 	{ "s25sl004a",  INFO(0x010212,      0,  64 * 1024,   8, 0) },
-@@ -577,6 +607,7 @@ static const struct spi_device_id spi_no
- 	{ "sst25wf010",  INFO(0xbf2502, 0, 64 * 1024,  2, SECT_4K | SST_WRITE) },
- 	{ "sst25wf020",  INFO(0xbf2503, 0, 64 * 1024,  4, SECT_4K | SST_WRITE) },
- 	{ "sst25wf040",  INFO(0xbf2504, 0, 64 * 1024,  8, SECT_4K | SST_WRITE) },
-+	{ "sst25wf080",  INFO(0xbf2505, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
- 
- 	/* ST Microelectronics -- newer production may have feature updates */
- 	{ "m25p05",  INFO(0x202010,  0,  32 * 1024,   2, 0) },
-@@ -588,7 +619,6 @@ static const struct spi_device_id spi_no
- 	{ "m25p32",  INFO(0x202016,  0,  64 * 1024,  64, 0) },
- 	{ "m25p64",  INFO(0x202017,  0,  64 * 1024, 128, 0) },
- 	{ "m25p128", INFO(0x202018,  0, 256 * 1024,  64, 0) },
--	{ "n25q032", INFO(0x20ba16,  0,  64 * 1024,  64, 0) },
- 
- 	{ "m25p05-nonjedec",  INFO(0, 0,  32 * 1024,   2, 0) },
- 	{ "m25p10-nonjedec",  INFO(0, 0,  32 * 1024,   4, 0) },
-@@ -643,32 +673,24 @@ static const struct spi_device_id spi_no
- static const struct spi_device_id *spi_nor_read_id(struct spi_nor *nor)
- {
- 	int			tmp;
--	u8			id[5];
--	u32			jedec;
--	u16                     ext_jedec;
-+	u8			id[SPI_NOR_MAX_ID_LEN];
- 	struct flash_info	*info;
- 
--	tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, 5);
-+	tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
- 	if (tmp < 0) {
- 		dev_dbg(nor->dev, " error %d reading JEDEC ID\n", tmp);
- 		return ERR_PTR(tmp);
- 	}
--	jedec = id[0];
--	jedec = jedec << 8;
--	jedec |= id[1];
--	jedec = jedec << 8;
--	jedec |= id[2];
--
--	ext_jedec = id[3] << 8 | id[4];
- 
- 	for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
- 		info = (void *)spi_nor_ids[tmp].driver_data;
--		if (info->jedec_id == jedec) {
--			if (info->ext_id == 0 || info->ext_id == ext_jedec)
-+		if (info->id_len) {
-+			if (!memcmp(info->id, id, info->id_len))
- 				return &spi_nor_ids[tmp];
- 		}
- 	}
--	dev_err(nor->dev, "unrecognized JEDEC id %06x\n", jedec);
-+	dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %2x, %2x\n",
-+		id[0], id[1], id[2]);
- 	return ERR_PTR(-ENODEV);
- }
- 
-@@ -703,11 +725,6 @@ static int sst_write(struct mtd_info *mt
- 	if (ret)
- 		return ret;
- 
--	/* Wait until finished previous write command. */
--	ret = wait_till_ready(nor);
--	if (ret)
--		goto time_out;
--
- 	write_enable(nor);
- 
- 	nor->sst_write_second = false;
-@@ -719,7 +736,7 @@ static int sst_write(struct mtd_info *mt
- 
- 		/* write one byte. */
- 		nor->write(nor, to, 1, retlen, buf);
--		ret = wait_till_ready(nor);
-+		ret = spi_nor_wait_till_ready(nor);
- 		if (ret)
- 			goto time_out;
- 	}
-@@ -731,7 +748,7 @@ static int sst_write(struct mtd_info *mt
- 
- 		/* write two bytes. */
- 		nor->write(nor, to, 2, retlen, buf + actual);
--		ret = wait_till_ready(nor);
-+		ret = spi_nor_wait_till_ready(nor);
- 		if (ret)
- 			goto time_out;
- 		to += 2;
-@@ -740,7 +757,7 @@ static int sst_write(struct mtd_info *mt
- 	nor->sst_write_second = false;
- 
- 	write_disable(nor);
--	ret = wait_till_ready(nor);
-+	ret = spi_nor_wait_till_ready(nor);
- 	if (ret)
- 		goto time_out;
- 
-@@ -751,7 +768,7 @@ static int sst_write(struct mtd_info *mt
- 		nor->program_opcode = SPINOR_OP_BP;
- 		nor->write(nor, to, 1, retlen, buf + actual);
- 
--		ret = wait_till_ready(nor);
-+		ret = spi_nor_wait_till_ready(nor);
- 		if (ret)
- 			goto time_out;
- 		write_disable(nor);
-@@ -779,11 +796,6 @@ static int spi_nor_write(struct mtd_info
- 	if (ret)
- 		return ret;
- 
--	/* Wait until finished previous write command. */
--	ret = wait_till_ready(nor);
--	if (ret)
--		goto write_err;
--
- 	write_enable(nor);
- 
- 	page_offset = to & (nor->page_size - 1);
-@@ -802,16 +814,20 @@ static int spi_nor_write(struct mtd_info
- 			if (page_size > nor->page_size)
- 				page_size = nor->page_size;
- 
--			wait_till_ready(nor);
-+			ret = spi_nor_wait_till_ready(nor);
-+			if (ret)
-+				goto write_err;
-+
- 			write_enable(nor);
- 
- 			nor->write(nor, to + i, page_size, retlen, buf + i);
- 		}
- 	}
- 
-+	ret = spi_nor_wait_till_ready(nor);
- write_err:
- 	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
--	return 0;
-+	return ret;
- }
- 
- static int macronix_quad_enable(struct spi_nor *nor)
-@@ -824,7 +840,7 @@ static int macronix_quad_enable(struct s
- 	nor->cmd_buf[0] = val | SR_QUAD_EN_MX;
- 	nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1, 0);
- 
--	if (wait_till_ready(nor))
-+	if (spi_nor_wait_till_ready(nor))
- 		return 1;
- 
- 	ret = read_sr(nor);
-@@ -874,11 +890,11 @@ static int spansion_quad_enable(struct s
- 	return 0;
- }
- 
--static int set_quad_mode(struct spi_nor *nor, u32 jedec_id)
-+static int set_quad_mode(struct spi_nor *nor, struct flash_info *info)
- {
- 	int status;
- 
--	switch (JEDEC_MFR(jedec_id)) {
-+	switch (JEDEC_MFR(info)) {
- 	case CFI_MFR_MACRONIX:
- 		status = macronix_quad_enable(nor);
- 		if (status) {
-@@ -904,11 +920,6 @@ static int spi_nor_check(struct spi_nor
- 		return -EINVAL;
- 	}
- 
--	if (!nor->read_id)
--		nor->read_id = spi_nor_read_id;
--	if (!nor->wait_till_ready)
--		nor->wait_till_ready = spi_nor_wait_till_ready;
--
- 	return 0;
- }
- 
-@@ -926,16 +937,24 @@ int spi_nor_scan(struct spi_nor *nor, co
- 	if (ret)
- 		return ret;
- 
--	id = spi_nor_match_id(name);
--	if (!id)
-+	/* Try to auto-detect if chip name wasn't specified */
-+	if (!name)
-+		id = spi_nor_read_id(nor);
-+	else
-+		id = spi_nor_match_id(name);
-+	if (IS_ERR_OR_NULL(id))
- 		return -ENOENT;
- 
- 	info = (void *)id->driver_data;
- 
--	if (info->jedec_id) {
-+	/*
-+	 * If caller has specified name of flash model that can normally be
-+	 * detected using JEDEC, let's verify it.
-+	 */
-+	if (name && info->id_len) {
- 		const struct spi_device_id *jid;
- 
--		jid = nor->read_id(nor);
-+		jid = spi_nor_read_id(nor);
- 		if (IS_ERR(jid)) {
- 			return PTR_ERR(jid);
- 		} else if (jid != id) {
-@@ -960,9 +979,9 @@ int spi_nor_scan(struct spi_nor *nor, co
- 	 * up with the software protection bits set
- 	 */
- 
--	if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ATMEL ||
--	    JEDEC_MFR(info->jedec_id) == CFI_MFR_INTEL ||
--	    JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) {
-+	if (JEDEC_MFR(info) == CFI_MFR_ATMEL ||
-+	    JEDEC_MFR(info) == CFI_MFR_INTEL ||
-+	    JEDEC_MFR(info) == CFI_MFR_SST) {
- 		write_enable(nor);
- 		write_sr(nor, 0);
- 	}
-@@ -977,7 +996,7 @@ int spi_nor_scan(struct spi_nor *nor, co
- 	mtd->_read = spi_nor_read;
- 
- 	/* nor protection support for STmicro chips */
--	if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ST) {
-+	if (JEDEC_MFR(info) == CFI_MFR_ST) {
- 		mtd->_lock = spi_nor_lock;
- 		mtd->_unlock = spi_nor_unlock;
- 	}
-@@ -988,9 +1007,8 @@ int spi_nor_scan(struct spi_nor *nor, co
- 	else
- 		mtd->_write = spi_nor_write;
- 
--	if ((info->flags & USE_FSR) &&
--	    nor->wait_till_ready == spi_nor_wait_till_ready)
--		nor->wait_till_ready = spi_nor_wait_till_fsr_ready;
-+	if (info->flags & USE_FSR)
-+		nor->flags |= SNOR_F_USE_FSR;
- 
- #ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
- 	/* prefer "small sector" erase if possible */
-@@ -1031,7 +1049,7 @@ int spi_nor_scan(struct spi_nor *nor, co
- 
- 	/* Quad/Dual-read mode takes precedence over fast/normal */
- 	if (mode == SPI_NOR_QUAD && info->flags & SPI_NOR_QUAD_READ) {
--		ret = set_quad_mode(nor, info->jedec_id);
-+		ret = set_quad_mode(nor, info);
- 		if (ret) {
- 			dev_err(dev, "quad mode not supported\n");
- 			return ret;
-@@ -1067,7 +1085,7 @@ int spi_nor_scan(struct spi_nor *nor, co
- 	else if (mtd->size > 0x1000000) {
- 		/* enable 4-byte addressing if the device exceeds 16MiB */
- 		nor->addr_width = 4;
--		if (JEDEC_MFR(info->jedec_id) == CFI_MFR_AMD) {
-+		if (JEDEC_MFR(info) == CFI_MFR_AMD) {
- 			/* Dedicated 4-byte command set */
- 			switch (nor->flash_read) {
- 			case SPI_NOR_QUAD:
-@@ -1088,7 +1106,7 @@ int spi_nor_scan(struct spi_nor *nor, co
- 			nor->erase_opcode = SPINOR_OP_SE_4B;
- 			mtd->erasesize = info->sector_size;
- 		} else
--			set_4byte(nor, info->jedec_id, 1);
-+			set_4byte(nor, info, 1);
- 	} else {
- 		nor->addr_width = 3;
- 	}
---- a/include/linux/mtd/spi-nor.h
-+++ b/include/linux/mtd/spi-nor.h
-@@ -116,6 +116,10 @@ enum spi_nor_ops {
- 	SPI_NOR_OPS_UNLOCK,
- };
- 
-+enum spi_nor_option_flags {
-+	SNOR_F_USE_FSR		= BIT(0),
-+};
-+
- /**
-  * struct spi_nor - Structure for defining a the SPI NOR layer
-  * @mtd:		point to a mtd_info structure
-@@ -129,6 +133,7 @@ enum spi_nor_ops {
-  * @program_opcode:	the program opcode
-  * @flash_read:		the mode of the read
-  * @sst_write_second:	used by the SST write operation
-+ * @flags:		flag options for the current SPI-NOR (SNOR_F_*)
-  * @cfg:		used by the read_xfer/write_xfer
-  * @cmd_buf:		used by the write_reg
-  * @prepare:		[OPTIONAL] do some preparations for the
-@@ -139,9 +144,6 @@ enum spi_nor_ops {
-  * @write_xfer:		[OPTIONAL] the writefundamental primitive
-  * @read_reg:		[DRIVER-SPECIFIC] read out the register
-  * @write_reg:		[DRIVER-SPECIFIC] write data to the register
-- * @read_id:		[REPLACEABLE] read out the ID data, and find
-- *			the proper spi_device_id
-- * @wait_till_ready:	[REPLACEABLE] wait till the NOR becomes ready
-  * @read:		[DRIVER-SPECIFIC] read data from the SPI NOR
-  * @write:		[DRIVER-SPECIFIC] write data to the SPI NOR
-  * @erase:		[DRIVER-SPECIFIC] erase a sector of the SPI NOR
-@@ -160,6 +162,7 @@ struct spi_nor {
- 	u8			program_opcode;
- 	enum read_mode		flash_read;
- 	bool			sst_write_second;
-+	u32			flags;
- 	struct spi_nor_xfer_cfg	cfg;
- 	u8			cmd_buf[SPI_NOR_MAX_CMD_SIZE];
- 
-@@ -172,8 +175,6 @@ struct spi_nor {
- 	int (*read_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len);
- 	int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len,
- 			int write_enable);
--	const struct spi_device_id *(*read_id)(struct spi_nor *nor);
--	int (*wait_till_ready)(struct spi_nor *nor);
- 
- 	int (*read)(struct spi_nor *nor, loff_t from,
- 			size_t len, size_t *retlen, u_char *read_buf);
diff --git a/target/linux/bcm53xx/patches-3.14/004-mtd-spi-nor-from-3.20.patch b/target/linux/bcm53xx/patches-3.14/004-mtd-spi-nor-from-3.20.patch
deleted file mode 100644
index 8a20da6..0000000
--- a/target/linux/bcm53xx/patches-3.14/004-mtd-spi-nor-from-3.20.patch
+++ /dev/null
@@ -1,116 +0,0 @@
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -538,6 +538,7 @@ static const struct spi_device_id spi_no
- 	/* GigaDevice */
- 	{ "gd25q32", INFO(0xc84016, 0, 64 * 1024,  64, SECT_4K) },
- 	{ "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) },
-+	{ "gd25q128", INFO(0xc84018, 0, 64 * 1024, 256, SECT_4K) },
- 
- 	/* Intel/Numonyx -- xxxs33b */
- 	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  32, 0) },
-@@ -560,14 +561,14 @@ static const struct spi_device_id spi_no
- 	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
- 
- 	/* Micron */
--	{ "n25q032",	 INFO(0x20ba16, 0, 64 * 1024,   64, 0) },
--	{ "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128, 0) },
--	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256, 0) },
--	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256, 0) },
--	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K) },
--	{ "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K) },
--	{ "n25q512ax3",  INFO(0x20ba20, 0, 64 * 1024, 1024, USE_FSR) },
--	{ "n25q00",      INFO(0x20ba21, 0, 64 * 1024, 2048, USE_FSR) },
-+	{ "n25q032",	 INFO(0x20ba16, 0, 64 * 1024,   64, SPI_NOR_QUAD_READ) },
-+	{ "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128, SPI_NOR_QUAD_READ) },
-+	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256, SPI_NOR_QUAD_READ) },
-+	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256, SPI_NOR_QUAD_READ) },
-+	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_QUAD_READ) },
-+	{ "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
-+	{ "n25q512ax3",  INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
-+	{ "n25q00",      INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
- 
- 	/* PMC */
- 	{ "pm25lv512",   INFO(0,        0, 32 * 1024,    2, SECT_4K_PMC) },
-@@ -890,6 +891,45 @@ static int spansion_quad_enable(struct s
- 	return 0;
- }
- 
-+static int micron_quad_enable(struct spi_nor *nor)
-+{
-+	int ret;
-+	u8 val;
-+
-+	ret = nor->read_reg(nor, SPINOR_OP_RD_EVCR, &val, 1);
-+	if (ret < 0) {
-+		dev_err(nor->dev, "error %d reading EVCR\n", ret);
-+		return ret;
-+	}
-+
-+	write_enable(nor);
-+
-+	/* set EVCR, enable quad I/O */
-+	nor->cmd_buf[0] = val & ~EVCR_QUAD_EN_MICRON;
-+	ret = nor->write_reg(nor, SPINOR_OP_WD_EVCR, nor->cmd_buf, 1, 0);
-+	if (ret < 0) {
-+		dev_err(nor->dev, "error while writing EVCR register\n");
-+		return ret;
-+	}
-+
-+	ret = spi_nor_wait_till_ready(nor);
-+	if (ret)
-+		return ret;
-+
-+	/* read EVCR and check it */
-+	ret = nor->read_reg(nor, SPINOR_OP_RD_EVCR, &val, 1);
-+	if (ret < 0) {
-+		dev_err(nor->dev, "error %d reading EVCR\n", ret);
-+		return ret;
-+	}
-+	if (val & EVCR_QUAD_EN_MICRON) {
-+		dev_err(nor->dev, "Micron EVCR Quad bit not clear\n");
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
- static int set_quad_mode(struct spi_nor *nor, struct flash_info *info)
- {
- 	int status;
-@@ -902,6 +942,13 @@ static int set_quad_mode(struct spi_nor
- 			return -EINVAL;
- 		}
- 		return status;
-+	case CFI_MFR_ST:
-+		status = micron_quad_enable(nor);
-+		if (status) {
-+			dev_err(nor->dev, "Micron quad-read not enabled\n");
-+			return -EINVAL;
-+		}
-+		return status;
- 	default:
- 		status = spansion_quad_enable(nor);
- 		if (status) {
---- a/include/linux/mtd/spi-nor.h
-+++ b/include/linux/mtd/spi-nor.h
-@@ -56,6 +56,10 @@
- /* Used for Spansion flashes only. */
- #define SPINOR_OP_BRWR		0x17	/* Bank register write */
- 
-+/* Used for Micron flashes only. */
-+#define SPINOR_OP_RD_EVCR      0x65    /* Read EVCR register */
-+#define SPINOR_OP_WD_EVCR      0x61    /* Write EVCR register */
-+
- /* Status Register bits. */
- #define SR_WIP			1	/* Write in progress */
- #define SR_WEL			2	/* Write enable latch */
-@@ -67,6 +71,9 @@
- 
- #define SR_QUAD_EN_MX		0x40	/* Macronix Quad I/O */
- 
-+/* Enhanced Volatile Configuration Register bits */
-+#define EVCR_QUAD_EN_MICRON    0x80    /* Micron Quad I/O */
-+
- /* Flag Status Register bits */
- #define FSR_READY		0x80
- 
diff --git a/target/linux/bcm53xx/patches-3.14/040-ARM-BCM5301X-initial-support-for-the-BCM5301X-BCM470.patch b/target/linux/bcm53xx/patches-3.14/040-ARM-BCM5301X-initial-support-for-the-BCM5301X-BCM470.patch
deleted file mode 100644
index c12d8df..0000000
--- a/target/linux/bcm53xx/patches-3.14/040-ARM-BCM5301X-initial-support-for-the-BCM5301X-BCM470.patch
+++ /dev/null
@@ -1,148 +0,0 @@
-From 5b293ebe757213993ae93b6cbbf5e1d09b75ac2f Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Tue, 4 Feb 2014 00:01:43 +0100
-Subject: [PATCH 1/3] ARM: BCM5301X: initial support for the BCM5301X/BCM470X
- SoCs with ARM CPU
-
-This patch adds support for the BCM5301X/BCM470X SoCs with an ARM CPUs.
-Currently just booting to a shell is working and nothing else, no
-Ethernet, wifi, flash, ...
-I have some pending patches to make Ethernet work for this device.
-Mostly device tree support for bcma is missing.
-
-This SoC is used in small office and home router with Broadcom SoCs
-it's internal name is Northstar. This code should support the BCM4707,
-BCM4708, BCM4709, BCM53010, BCM53011 and BCM53012 SoC. It uses one or
-two ARM Cortex A9 Cores, some highlights are 2 PCIe 2.0 controllers,
-4 Gigabit Ethernet MACs and a USB 3.0 host controller.
-
-This SoC uses a dual core CPU, but this is currently not implemented.
-More information about this SoC can be found here:
-http://www.anandtech.com/show/5925/broadcom-announces-bcm4708x-and-bcm5301x-socs-for-80211ac-routers
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Acked-by: Arnd Bergmann <arnd@arndb.de>
-Acked-by: Christian Daudt <bcm@fixthebug.org>
-Signed-off-by: Matt Porter <mporter@linaro.org>
----
- Documentation/devicetree/bindings/arm/bcm4708.txt |    8 ++++++
- MAINTAINERS                                       |    8 ++++++
- arch/arm/configs/multi_v7_defconfig               |    1 +
- arch/arm/mach-bcm/Kconfig                         |   26 +++++++++++++++++++
- arch/arm/mach-bcm/Makefile                        |    1 +
- arch/arm/mach-bcm/bcm_5301x.c                     |   28 +++++++++++++++++++++
- 6 files changed, 72 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/arm/bcm4708.txt
- create mode 100644 arch/arm/mach-bcm/bcm_5301x.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/arm/bcm4708.txt
-@@ -0,0 +1,8 @@
-+Broadcom BCM4708 device tree bindings
-+-------------------------------------------
-+
-+Boards with the BCM4708 SoC shall have the following properties:
-+
-+Required root node property:
-+
-+compatible = "brcm,bcm4708";
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -1883,6 +1883,14 @@ F:	arch/arm/boot/dts/bcm2835*
- F:	arch/arm/configs/bcm2835_defconfig
- F:	drivers/*/*bcm2835*
- 
-+BROADCOM BCM5301X ARM ARCHICTURE
-+M:	Hauke Mehrtens <hauke@hauke-m.de>
-+L:	linux-arm-kernel@lists.infradead.org
-+S:	Maintained
-+F:	arch/arm/mach-bcm/bcm_5301x.c
-+F:	arch/arm/boot/dts/bcm5301x.dtsi
-+F:	arch/arm/boot/dts/bcm470*
-+
- BROADCOM TG3 GIGABIT ETHERNET DRIVER
- M:	Nithin Nayak Sujir <nsujir@broadcom.com>
- M:	Michael Chan <mchan@broadcom.com>
---- a/arch/arm/configs/multi_v7_defconfig
-+++ b/arch/arm/configs/multi_v7_defconfig
-@@ -11,6 +11,7 @@ CONFIG_ARCH_MVEBU=y
- CONFIG_MACH_ARMADA_370=y
- CONFIG_MACH_ARMADA_XP=y
- CONFIG_ARCH_BCM=y
-+CONFIG_ARCH_BCM_5301X=y
- CONFIG_ARCH_BCM_MOBILE=y
- CONFIG_ARCH_BERLIN=y
- CONFIG_MACH_BERLIN_BG2=y
---- a/arch/arm/mach-bcm/Kconfig
-+++ b/arch/arm/mach-bcm/Kconfig
-@@ -32,6 +32,32 @@ config ARCH_BCM_MOBILE
- 	  BCM11130, BCM11140, BCM11351, BCM28145 and
- 	  BCM28155 variants.
- 
-+config ARCH_BCM_5301X
-+	bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
-+	depends on MMU
-+	select ARM_GIC
-+	select CACHE_L2X0
-+	select HAVE_ARM_SCU if SMP
-+	select HAVE_ARM_TWD if SMP
-+	select HAVE_SMP
-+	select COMMON_CLK
-+	select GENERIC_CLOCKEVENTS
-+	select ARM_GLOBAL_TIMER
-+	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
-+	select MIGHT_HAVE_PCI
-+	help
-+	  Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
-+
-+	  This is a network SoC line mostly used in home routers and
-+	  wifi access points, it's internal name is Northstar.
-+	  This inclused the following SoC: BCM53010, BCM53011, BCM53012,
-+	  BCM53014, BCM53015, BCM53016, BCM53017, BCM53018, BCM4707,
-+	  BCM4708 and BCM4709.
-+
-+	  Do not confuse this with the BCM4760 which is a totally
-+	  different SoC or with the older BCM47XX and BCM53XX based
-+	  network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx
-+
- endmenu
- 
- endif
---- a/arch/arm/mach-bcm/Makefile
-+++ b/arch/arm/mach-bcm/Makefile
-@@ -13,3 +13,4 @@
- obj-$(CONFIG_ARCH_BCM_MOBILE)	:= board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o
- plus_sec := $(call as-instr,.arch_extension sec,+sec)
- AFLAGS_bcm_kona_smc_asm.o	:=-Wa,-march=armv7-a$(plus_sec)
-+obj-$(CONFIG_ARCH_BCM_5301X)	+= bcm_5301x.o
---- /dev/null
-+++ b/arch/arm/mach-bcm/bcm_5301x.c
-@@ -0,0 +1,28 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ *
-+ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+#include <linux/of_platform.h>
-+#include <asm/hardware/cache-l2x0.h>
-+
-+#include <asm/mach/arch.h>
-+
-+
-+static void __init bcm5301x_dt_init(void)
-+{
-+	l2x0_of_init(0, ~0UL);
-+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-+}
-+
-+static const char __initconst *bcm5301x_dt_compat[] = {
-+	"brcm,bcm4708",
-+	NULL,
-+};
-+
-+DT_MACHINE_START(BCM5301X, "BCM5301X")
-+	.init_machine	= bcm5301x_dt_init,
-+	.dt_compat	= bcm5301x_dt_compat,
-+MACHINE_END
diff --git a/target/linux/bcm53xx/patches-3.14/041-ARM-BCM5301X-add-early-debugging-support.patch b/target/linux/bcm53xx/patches-3.14/041-ARM-BCM5301X-add-early-debugging-support.patch
deleted file mode 100644
index 2e028a8..0000000
--- a/target/linux/bcm53xx/patches-3.14/041-ARM-BCM5301X-add-early-debugging-support.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 065802756b20d878c83290c115f212fc1631cba7 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Tue, 4 Feb 2014 00:01:44 +0100
-Subject: [PATCH 2/3] ARM: BCM5301X: add early debugging support
-
-This adds support for early debugging of BCM5301X SoC.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Acked-by: Arnd Bergmann <arnd@arndb.de>
-Acked-by: Christian Daudt <bcm@fixthebug.org>
-Signed-off-by: Matt Porter <mporter@linaro.org>
----
- arch/arm/Kconfig.debug |    7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/arm/Kconfig.debug
-+++ b/arch/arm/Kconfig.debug
-@@ -106,6 +106,11 @@ choice
- 		depends on ARCH_BCM2835
- 		select DEBUG_UART_PL01X
- 
-+	config DEBUG_BCM_5301X
-+		bool "Kernel low-level debugging on BCM5301X UART1"
-+		depends on ARCH_BCM_5301X
-+		select DEBUG_UART_PL01X
-+
- 	config DEBUG_BCM_KONA_UART
- 		bool "Kernel low-level debugging messages via BCM KONA UART"
- 		depends on ARCH_BCM
-@@ -1023,6 +1028,7 @@ config DEBUG_UART_PHYS
- 	default 0x101f1000 if ARCH_VERSATILE
- 	default 0x101fb000 if DEBUG_NOMADIK_UART
- 	default 0x16000000 if ARCH_INTEGRATOR
-+	default 0x18000300 if DEBUG_BCM_5301X
- 	default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
- 	default 0x20060000 if DEBUG_RK29_UART0
- 	default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
-@@ -1071,6 +1077,7 @@ config DEBUG_UART_VIRT
- 	default 0xf0009000 if DEBUG_CNS3XXX
- 	default 0xf01fb000 if DEBUG_NOMADIK_UART
- 	default 0xf0201000 if DEBUG_BCM2835
-+	default 0xf1000300 if DEBUG_BCM_5301X
- 	default 0xf11f1000 if ARCH_VERSATILE
- 	default 0xf1600000 if ARCH_INTEGRATOR
- 	default 0xf1c28000 if DEBUG_SUNXI_UART0
diff --git a/target/linux/bcm53xx/patches-3.14/042-ARM-BCM5301X-workaround-suppress-fault.patch b/target/linux/bcm53xx/patches-3.14/042-ARM-BCM5301X-workaround-suppress-fault.patch
deleted file mode 100644
index 41a9dd1..0000000
--- a/target/linux/bcm53xx/patches-3.14/042-ARM-BCM5301X-workaround-suppress-fault.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From fdf4850cb5b2e5e549a18b8b41abb001bfb19e9c Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Tue, 4 Feb 2014 00:01:46 +0100
-Subject: [PATCH 3/3] ARM: BCM5301X: workaround suppress fault
-
-Without this patch I am getting a unhandled fault exception like this
-one after "Freeing unused kernel memory":
-
-Freeing unused kernel memory: 1260K (c02c1000 - c03fc000)
-Unhandled fault: imprecise external abort (0x1c06) at 0xb6f89005
-Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007
-
-The address which is here 0xb6f89005 changes from boot to boot, with a
-new build the changes are bigger. With kernel 3.10 I have also seen
-this fault at different places in the boot process, but starting with
-3.11 they are always occurring after the "Freeing unused kernel memory"
-message. I never was able to completely boot to userspace without this
-handler. The abort code is constant 0x1c06. This fault just happens
-once in the boot process I have never seen it happing twice or more.
-
-I also tried changing the CPSR.A bit to 0 in init_early, with this code
-like Afzal suggested, but that did not change anything:
-asm volatile("mrs r12, cpsr\n"
-	"bic r12, r12, #0x00000100\n"
-	"msr cpsr_c, r12" ::: "r12", "cc", "memory");
-
-Disabling the L2 cache by building with CONFIG_CACHE_L2X0 unset did not
-help.
-
-This workaround was copied from the vendor code including most of the
-comments. It says it they think this is caused by the CFE boot loader
-used on this device. I do not have any access to any datasheet or
-errata document to check this.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Acked-by: Arnd Bergmann <arnd@arndb.de>
-Acked-by: Christian Daudt <bcm@fixthebug.org>
-Signed-off-by: Matt Porter <mporter@linaro.org>
----
- arch/arm/mach-bcm/bcm_5301x.c |   33 +++++++++++++++++++++++++++++++++
- 1 file changed, 33 insertions(+)
-
---- a/arch/arm/mach-bcm/bcm_5301x.c
-+++ b/arch/arm/mach-bcm/bcm_5301x.c
-@@ -9,8 +9,40 @@
- #include <asm/hardware/cache-l2x0.h>
- 
- #include <asm/mach/arch.h>
-+#include <asm/siginfo.h>
-+#include <asm/signal.h>
- 
- 
-+static bool first_fault = true;
-+
-+static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr,
-+				 struct pt_regs *regs)
-+{
-+	if (fsr == 0x1c06 && first_fault) {
-+		first_fault = false;
-+
-+		/*
-+		 * These faults with code 0x1c06 happens for no good reason,
-+		 * possibly left over from the CFE boot loader.
-+		 */
-+		pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
-+		addr, fsr);
-+
-+		/* Returning non-zero causes fault display and panic */
-+		return 0;
-+	}
-+
-+	/* Others should cause a fault */
-+	return 1;
-+}
-+
-+static void __init bcm5301x_init_early(void)
-+{
-+	/* Install our hook */
-+	hook_fault_code(16 + 6, bcm5301x_abort_handler, SIGBUS, BUS_OBJERR,
-+			"imprecise external abort");
-+}
-+
- static void __init bcm5301x_dt_init(void)
- {
- 	l2x0_of_init(0, ~0UL);
-@@ -23,6 +55,7 @@ static const char __initconst *bcm5301x_
- };
- 
- DT_MACHINE_START(BCM5301X, "BCM5301X")
-+	.init_early	= bcm5301x_init_early,
- 	.init_machine	= bcm5301x_dt_init,
- 	.dt_compat	= bcm5301x_dt_compat,
- MACHINE_END
diff --git a/target/linux/bcm53xx/patches-3.14/043-ARM-BCM5301X-add-dts-files-for-BCM4708-SoC.patch b/target/linux/bcm53xx/patches-3.14/043-ARM-BCM5301X-add-dts-files-for-BCM4708-SoC.patch
deleted file mode 100644
index 4e98ec8..0000000
--- a/target/linux/bcm53xx/patches-3.14/043-ARM-BCM5301X-add-dts-files-for-BCM4708-SoC.patch
+++ /dev/null
@@ -1,204 +0,0 @@
-From d27509f19b5f93ea3425cfef782bb3c6541cd44d Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Tue, 4 Feb 2014 00:01:45 +0100
-Subject: [PATCH] ARM: BCM5301X: add dts files for BCM4708 SoC
-
-This uses the newly added BCM5301X SoC code.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Acked-by: Arnd Bergmann <arnd@arndb.de>
-Acked-by: Christian Daudt <bcm@fixthebug.org>
-Signed-off-by: Matt Porter <mporter@linaro.org>
----
- arch/arm/boot/dts/Makefile                  |    1 +
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts |   35 ++++++++++
- arch/arm/boot/dts/bcm4708.dtsi              |   34 ++++++++++
- arch/arm/boot/dts/bcm5301x.dtsi             |   95 +++++++++++++++++++++++++++
- 4 files changed, 165 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm4708-netgear-r6250.dts
- create mode 100644 arch/arm/boot/dts/bcm4708.dtsi
- create mode 100644 arch/arm/boot/dts/bcm5301x.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -50,6 +50,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rp
- dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm11351-brt.dtb \
- 	bcm28155-ap.dtb
- dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
-+dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
- dtb-$(CONFIG_ARCH_BERLIN) += \
- 	berlin2-sony-nsz-gs7.dtb	\
- 	berlin2cd-google-chromecast.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -0,0 +1,35 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X arm platform code.
-+ * DTS for Netgear R6250 V1
-+ *
-+ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+
-+/ {
-+	compatible = "netgear,r6250v1", "brcm,bcm4708";
-+	model = "Netgear R6250 V1 (BCM4708)";
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200";
-+	};
-+
-+	memory {
-+		reg = <0x00000000 0x08000000>;
-+	};
-+
-+	chipcommonA {
-+		uart0: serial@0300 {
-+			status = "okay";
-+		};
-+
-+		uart1: serial@0400 {
-+			status = "okay";
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4708.dtsi
-@@ -0,0 +1,34 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for BCM4708 SoC.
-+ *
-+ * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include "bcm5301x.dtsi"
-+
-+/ {
-+	compatible = "brcm,bcm4708";
-+
-+	cpus {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		cpu@0 {
-+			device_type = "cpu";
-+			compatible = "arm,cortex-a9";
-+			next-level-cache = <&L2>;
-+			reg = <0x0>;
-+		};
-+
-+		cpu@1 {
-+			device_type = "cpu";
-+			compatible = "arm,cortex-a9";
-+			next-level-cache = <&L2>;
-+			reg = <0x1>;
-+		};
-+	};
-+
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -0,0 +1,95 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
-+ * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
-+ *
-+ * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+#include "skeleton.dtsi"
-+
-+/ {
-+	interrupt-parent = <&gic>;
-+
-+	chipcommonA {
-+		compatible = "simple-bus";
-+		ranges = <0x00000000 0x18000000 0x00001000>;
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		uart0: serial@0300 {
-+			compatible = "ns16550";
-+			reg = <0x0300 0x100>;
-+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-+			clock-frequency = <100000000>;
-+			status = "disabled";
-+		};
-+
-+		uart1: serial@0400 {
-+			compatible = "ns16550";
-+			reg = <0x0400 0x100>;
-+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-+			clock-frequency = <100000000>;
-+			status = "disabled";
-+		};
-+	};
-+
-+	mpcore {
-+		compatible = "simple-bus";
-+		ranges = <0x00000000 0x19020000 0x00003000>;
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		scu@0000 {
-+			compatible = "arm,cortex-a9-scu";
-+			reg = <0x0000 0x100>;
-+		};
-+
-+		timer@0200 {
-+			compatible = "arm,cortex-a9-global-timer";
-+			reg = <0x0200 0x100>;
-+			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&clk_periph>;
-+		};
-+
-+		local-timer@0600 {
-+			compatible = "arm,cortex-a9-twd-timer";
-+			reg = <0x0600 0x100>;
-+			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&clk_periph>;
-+		};
-+
-+		gic: interrupt-controller@1000 {
-+			compatible = "arm,cortex-a9-gic";
-+			#interrupt-cells = <3>;
-+			#address-cells = <0>;
-+			interrupt-controller;
-+			reg = <0x1000 0x1000>,
-+			      <0x0100 0x100>;
-+		};
-+
-+		L2: cache-controller@2000 {
-+			compatible = "arm,pl310-cache";
-+			reg = <0x2000 0x1000>;
-+			cache-unified;
-+			cache-level = <2>;
-+		};
-+	};
-+
-+	clocks {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		/* As long as we do not have a real clock driver us this
-+		 * fixed clock */
-+		clk_periph: periph {
-+			compatible = "fixed-clock";
-+			#clock-cells = <0>;
-+			clock-frequency = <400000000>;
-+		};
-+	};
-+};
diff --git a/target/linux/bcm53xx/patches-3.14/044-0-ARM-BCM5301X-fix-early-serial-console.patch b/target/linux/bcm53xx/patches-3.14/044-0-ARM-BCM5301X-fix-early-serial-console.patch
deleted file mode 100644
index 4ead8c4..0000000
--- a/target/linux/bcm53xx/patches-3.14/044-0-ARM-BCM5301X-fix-early-serial-console.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 140bd60383309e82b5cae3294a907c11a0a12b90 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 14 Sep 2014 21:43:40 +0200
-Subject: [PATCH] ARM: BCM5301X: fix early serial console
-
-This device actually has a 8250 serial with a shift of 0.
-Tested this on a BCM4708.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
----
- arch/arm/Kconfig.debug | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
-index 1c4889d..a528843 100644
---- a/arch/arm/Kconfig.debug
-+++ b/arch/arm/Kconfig.debug
-@@ -109,7 +109,7 @@ choice
- 	config DEBUG_BCM_5301X
- 		bool "Kernel low-level debugging on BCM5301X UART1"
- 		depends on ARCH_BCM_5301X
--		select DEBUG_UART_PL01X
-+		select DEBUG_UART_8250
- 
- 	config DEBUG_BCM_KONA_UART
- 		bool "Kernel low-level debugging messages via BCM KONA UART"
-@@ -1132,7 +1132,7 @@ config DEBUG_UART_VIRT
- config DEBUG_UART_8250_SHIFT
- 	int "Register offset shift for the 8250 debug UART"
- 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
--	default 0 if FOOTBRIDGE || ARCH_IOP32X
-+	default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X
- 	default 2
- 
- config DEBUG_UART_8250_WORD
--- 
-1.8.4.5
-
diff --git a/target/linux/bcm53xx/patches-3.14/044-ARM-BCM5301X-Add-Broadcom-s-bus-axi-to-the-DTS-file.patch b/target/linux/bcm53xx/patches-3.14/044-ARM-BCM5301X-Add-Broadcom-s-bus-axi-to-the-DTS-file.patch
deleted file mode 100644
index ac52aa0..0000000
--- a/target/linux/bcm53xx/patches-3.14/044-ARM-BCM5301X-Add-Broadcom-s-bus-axi-to-the-DTS-file.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From a2533caee935fff97e3e8dbfad5cc159e6bf6034 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 1 Oct 2014 09:21:07 +0200
-Subject: [PATCH 1/2] ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -8,6 +8,7 @@
-  * Licensed under the GNU/GPL. See COPYING for details.
-  */
- 
-+#include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include "skeleton.dtsi"
-@@ -92,4 +93,19 @@
- 			clock-frequency = <400000000>;
- 		};
- 	};
-+
-+	axi@18000000 {
-+		compatible = "brcm,bus-axi";
-+		reg = <0x18000000 0x1000>;
-+		ranges = <0x00000000 0x18000000 0x00100000>;
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		chipcommon: chipcommon@0 {
-+			reg = <0x00000000 0x1000>;
-+
-+			gpio-controller;
-+			#gpio-cells = <2>;
-+		};
-+	};
- };
diff --git a/target/linux/bcm53xx/patches-3.14/045-ARM-BCM5301X-Add-LEDs-for-Netgear-R6250-V1.patch b/target/linux/bcm53xx/patches-3.14/045-ARM-BCM5301X-Add-LEDs-for-Netgear-R6250-V1.patch
deleted file mode 100644
index c394f3c..0000000
--- a/target/linux/bcm53xx/patches-3.14/045-ARM-BCM5301X-Add-LEDs-for-Netgear-R6250-V1.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From b7e4d148906685882a081e7e50692313c5a8724e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 1 Oct 2014 09:23:09 +0200
-Subject: [PATCH 2/2] ARM: BCM5301X: Add LEDs for Netgear R6250 V1
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 34 +++++++++++++++++++++++++++++
- 1 file changed, 34 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -32,4 +32,38 @@
- 			status = "okay";
- 		};
- 	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		logo {
-+			label = "bcm53xx:white:logo";
-+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "default-on";
-+		};
-+
-+		power0 {
-+			label = "bcm53xx:green:power";
-+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "default-off";
-+		};
-+
-+		power1 {
-+			label = "bcm53xx:amber:power";
-+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "default-on";
-+		};
-+
-+		usb {
-+			label = "bcm53xx:blue:usb";
-+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "default-off";
-+		};
-+
-+		wireless {
-+			label = "bcm53xx:blue:wireless";
-+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "default-off";
-+		};
-+	};
- };
diff --git a/target/linux/bcm53xx/patches-3.14/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch b/target/linux/bcm53xx/patches-3.14/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch
deleted file mode 100644
index 35cd0ca..0000000
--- a/target/linux/bcm53xx/patches-3.14/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From dec378827c4aaab6c46ecdd5fc2c3b3155d68743 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Wed, 24 Sep 2014 23:50:07 +0200
-Subject: [PATCH] ARM: BCM5301X: Add IRQs to Broadcom's bus-axi in DTS file
-
-IRQ support for Broadcom's bus-axi driver bcma was merged into John
-Linville's wireless tree and will show up in 3.19. This patch makes use
-of this feature in the DTS file for the the BCM5301X SoCs. I left the
-PCIe controller out, because this still needs some discussion.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 34 ++++++++++++++++++++++++++++++++++
- 1 file changed, 34 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -101,6 +101,40 @@
- 		#address-cells = <1>;
- 		#size-cells = <1>;
- 
-+		#interrupt-cells = <1>;
-+		interrupt-map-mask = <0x000fffff 0xffff>;
-+		interrupt-map = 
-+			/* ChipCommon */
-+			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-+
-+			/* USB 2.0 Controller */
-+			<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
-+
-+			/* USB 3.0 Controller */
-+			<0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
-+
-+			/* Ethernet Controller 0 */
-+			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-+
-+			/* Ethernet Controller 1 */
-+			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-+
-+			/* Ethernet Controller 2 */
-+			<0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-+
-+			/* Ethernet Controller 3 */
-+			<0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-+
-+			/* NAND Controller */
-+			<0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-+
- 		chipcommon: chipcommon@0 {
- 			reg = <0x00000000 0x1000>;
- 
diff --git a/target/linux/bcm53xx/patches-3.14/047-ARM-BCM5301X-Add-buttons-for-Netgear-R6250.patch b/target/linux/bcm53xx/patches-3.14/047-ARM-BCM5301X-Add-buttons-for-Netgear-R6250.patch
deleted file mode 100644
index 2b9b900..0000000
--- a/target/linux/bcm53xx/patches-3.14/047-ARM-BCM5301X-Add-buttons-for-Netgear-R6250.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From f6f8234439737171e571a41264280e844a429699 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sun, 30 Nov 2014 18:28:29 +0100
-Subject: [PATCH] ARM: BCM5301X: Add buttons for Netgear R6250
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 25 +++++++++++++++++++++++++
- arch/arm/boot/dts/bcm5301x.dtsi             |  1 +
- 2 files changed, 26 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -66,4 +66,29 @@
- 			linux,default-trigger = "default-off";
- 		};
- 	};
-+
-+	gpio-keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		poll-interval = <200>;
-+
-+		wps {
-+			label = "WPS";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		rfkill {
-+			label = "WiFi";
-+			linux,code = <KEY_RFKILL>;
-+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		restart {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-+		};
-+	};
- };
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -9,6 +9,7 @@
-  */
- 
- #include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include "skeleton.dtsi"
diff --git a/target/linux/bcm53xx/patches-3.14/048-ARM-BCM5301X-Add-DT-for-Netgear-R6300-V2.patch b/target/linux/bcm53xx/patches-3.14/048-ARM-BCM5301X-Add-DT-for-Netgear-R6300-V2.patch
deleted file mode 100644
index a9e049a..0000000
--- a/target/linux/bcm53xx/patches-3.14/048-ARM-BCM5301X-Add-DT-for-Netgear-R6300-V2.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From 302a5ef29d497449280422576a1b55c72fc0ba4c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 4 Dec 2014 10:22:02 +0100
-Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R6300 V2
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/Makefile                     |  4 +-
- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 84 ++++++++++++++++++++++++++
- 2 files changed, 87 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -50,7 +50,9 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rp
- dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm11351-brt.dtb \
- 	bcm28155-ap.dtb
- dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
--dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
-+dtb-$(CONFIG_ARCH_BCM_5301X) += \
-+	bcm4708-netgear-r6250.dtb \
-+	bcm4708-netgear-r6300-v2.dtb
- dtb-$(CONFIG_ARCH_BERLIN) += \
- 	berlin2-sony-nsz-gs7.dtb	\
- 	berlin2cd-google-chromecast.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -0,0 +1,84 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Netgear R6300 V2
-+ *
-+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+
-+/ {
-+	compatible = "netgear,r6300v2", "brcm,bcm4708";
-+	model = "Netgear R6300 V2 (BCM4708)";
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200";
-+	};
-+
-+	memory {
-+		reg = <0x00000000 0x08000000>;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		logo {
-+			label = "bcm53xx:white:logo";
-+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "default-on";
-+		};
-+
-+		power0 {
-+			label = "bcm53xx:green:power";
-+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "default-off";
-+		};
-+
-+		power1 {
-+			label = "bcm53xx:amber:power";
-+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "default-on";
-+		};
-+
-+		usb {
-+			label = "bcm53xx:blue:usb";
-+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "default-off";
-+		};
-+
-+		wireless {
-+			label = "bcm53xx:blue:wireless";
-+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "default-off";
-+		};
-+	};
-+
-+	gpio-keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		poll-interval = <200>;
-+
-+		wps {
-+			label = "WPS";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		rfkill {
-+			label = "WiFi";
-+			linux,code = <KEY_RFKILL>;
-+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		restart {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
diff --git a/target/linux/bcm53xx/patches-3.14/049-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-1750DHP.patch b/target/linux/bcm53xx/patches-3.14/049-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-1750DHP.patch
deleted file mode 100644
index 01d85aa..0000000
--- a/target/linux/bcm53xx/patches-3.14/049-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-1750DHP.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From e336a14d2a2aa4431a8acc9eb3305b37f26fb696 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 4 Dec 2014 10:22:58 +0100
-Subject: [PATCH] ARM: BCM5301X: Add DT for Buffalo WZR-1750DHP
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/Makefile                        |  1 +
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 64 +++++++++++++++++++++++
- 2 files changed, 65 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -51,6 +51,7 @@ dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm1135
- 	bcm28155-ap.dtb
- dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
- dtb-$(CONFIG_ARCH_BCM_5301X) += \
-+	bcm4708-buffalo-wzr-1750dhp.dtb \
- 	bcm4708-netgear-r6250.dtb \
- 	bcm4708-netgear-r6300-v2.dtb
- dtb-$(CONFIG_ARCH_BERLIN) += \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -0,0 +1,64 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Buffalo WZR-1750DHP
-+ *
-+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+
-+/ {
-+	compatible = "buffalo,wzr-1750dhp", "brcm,bcm4708";
-+	model = "Buffalo WZR-1750DHP (BCM4708)";
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200";
-+	};
-+
-+	memory {
-+		reg = <0x00000000 0x08000000>;
-+	};
-+
-+	gpio-keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		poll-interval = <200>;
-+
-+		restart {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		aoss {
-+			label = "AOSS";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		/* Commit mode set by switch? */
-+		mode {
-+			label = "Mode";
-+			linux,code = <KEY_SETUP>;
-+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		/* Switch: AP mode */
-+		sw_ap {
-+			label = "AP";
-+			linux,code = <BTN_0>;
-+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		eject {
-+			label = "USB eject";
-+			linux,code = <KEY_EJECTCD>;
-+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
diff --git a/target/linux/bcm53xx/patches-3.14/050-ARM-BCM5301X-Add-DT-for-Asus-RT-N18U.patch b/target/linux/bcm53xx/patches-3.14/050-ARM-BCM5301X-Add-DT-for-Asus-RT-N18U.patch
deleted file mode 100644
index edcabcd..0000000
--- a/target/linux/bcm53xx/patches-3.14/050-ARM-BCM5301X-Add-DT-for-Asus-RT-N18U.patch
+++ /dev/null
@@ -1,140 +0,0 @@
-From ae2ed35a40007bf737da452df7081a453bf89ce3 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 4 Dec 2014 10:23:33 +0100
-Subject: [PATCH] ARM: BCM5301X: Add DT for Asus RT-N18U
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/Makefile                  |  3 +-
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 78 +++++++++++++++++++++++++++++
- arch/arm/boot/dts/bcm47081.dtsi             | 26 ++++++++++
- 3 files changed, 106 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
- create mode 100644 arch/arm/boot/dts/bcm47081.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -53,7 +53,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rp
- dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm4708-buffalo-wzr-1750dhp.dtb \
- 	bcm4708-netgear-r6250.dtb \
--	bcm4708-netgear-r6300-v2.dtb
-+	bcm4708-netgear-r6300-v2.dtb \
-+	bcm47081-asus-rt-n18u.dtb
- dtb-$(CONFIG_ARCH_BERLIN) += \
- 	berlin2-sony-nsz-gs7.dtb	\
- 	berlin2cd-google-chromecast.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -0,0 +1,78 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Asus RT-N18U
-+ *
-+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47081.dtsi"
-+
-+/ {
-+	compatible = "asus,rt-n18u", "brcm,bcm47081", "brcm,bcm4708";
-+	model = "Asus RT-N18U (BCM47081)";
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200";
-+	};
-+
-+	memory {
-+		reg = <0x00000000 0x08000000>;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		power {
-+			label = "bcm53xx:blue:power";
-+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "default-on";
-+		};
-+
-+		usb2 {
-+			label = "bcm53xx:blue:usb2";
-+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "default-off";
-+		};
-+
-+		wan {
-+			label = "bcm53xx:blue:wan";
-+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "default-on";
-+		};
-+
-+		lan {
-+			label = "bcm53xx:blue:lan";
-+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "default-on";
-+		};
-+
-+		usb3 {
-+			label = "bcm53xx:blue:usb3";
-+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "default-off";
-+		};
-+	};
-+
-+	gpio-keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		poll-interval = <200>;
-+
-+		restart {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		wps {
-+			label = "WPS";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47081.dtsi
-@@ -0,0 +1,26 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for BCM47081 SoC.
-+ *
-+ * Copyright © 2014 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include "bcm5301x.dtsi"
-+
-+/ {
-+	compatible = "brcm,bcm47081";
-+
-+	cpus {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		cpu@0 {
-+			device_type = "cpu";
-+			compatible = "arm,cortex-a9";
-+			next-level-cache = <&L2>;
-+			reg = <0x0>;
-+		};
-+	};
-+};
diff --git a/target/linux/bcm53xx/patches-3.14/051-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-600DHP2.patch b/target/linux/bcm53xx/patches-3.14/051-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-600DHP2.patch
deleted file mode 100644
index da5274f..0000000
--- a/target/linux/bcm53xx/patches-3.14/051-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-600DHP2.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From dd7733da69f198f576d7f52f6bc5a860fe24930d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 4 Dec 2014 10:24:02 +0100
-Subject: [PATCH] ARM: BCM5301X: Add DT for Buffalo WZR-600DHP2
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/Makefile                         |  3 +-
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 57 ++++++++++++++++++++++
- 2 files changed, 59 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -54,7 +54,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm4708-buffalo-wzr-1750dhp.dtb \
- 	bcm4708-netgear-r6250.dtb \
- 	bcm4708-netgear-r6300-v2.dtb \
--	bcm47081-asus-rt-n18u.dtb
-+	bcm47081-asus-rt-n18u.dtb \
-+	bcm47081-buffalo-wzr-600dhp2.dtb
- dtb-$(CONFIG_ARCH_BERLIN) += \
- 	berlin2-sony-nsz-gs7.dtb	\
- 	berlin2cd-google-chromecast.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -0,0 +1,57 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Buffalo WZR-600DHP2
-+ *
-+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47081.dtsi"
-+
-+/ {
-+	compatible = "buffalo,wzr-600dhp2", "brcm,bcm47081", "brcm,bcm4708";
-+	model = "Buffalo WZR-600DHP2 (BCM47081)";
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200";
-+	};
-+
-+	memory {
-+		reg = <0x00000000 0x08000000>;
-+	};
-+
-+	gpio-keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		poll-interval = <200>;
-+
-+		aoss {
-+			label = "AOSS";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		restart {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		/* Switch device mode? */
-+		mode {
-+			label = "Mode";
-+			linux,code = <KEY_SETUP>;
-+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		eject {
-+			label = "USB eject";
-+			linux,code = <KEY_EJECTCD>;
-+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
diff --git a/target/linux/bcm53xx/patches-3.14/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch b/target/linux/bcm53xx/patches-3.14/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch
deleted file mode 100644
index dfbab9d..0000000
--- a/target/linux/bcm53xx/patches-3.14/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From e27a09ae9369e10bc589ef4d720ecf4abcbcec50 Mon Sep 17 00:00:00 2001
-From: Dan Haab <dhaab@luxul.com>
-Date: Mon, 19 Jan 2015 12:45:37 -0700
-Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XWC-1000
-
-Luxul XWC-1000 is a controller device based on BCM4708 SoC. The only
-unusual thing in its DTS file is "ubi" partition on NAND flash.
-
-Signed-off-by: Dan Haab <dhaab@luxul.com>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/Makefile                   |  1 +
- arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 60 ++++++++++++++++++++++++++++
- 2 files changed, 61 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 91bd5bd..ff4a5ae 100644
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -52,6 +52,7 @@ dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm1135
- dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
- dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm4708-buffalo-wzr-1750dhp.dtb \
-+	bcm4708-luxul-xwc-1000.dtb \
- 	bcm4708-netgear-r6250.dtb \
- 	bcm4708-netgear-r6300-v2.dtb \
- 	bcm47081-asus-rt-n18u.dtb \
-diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-new file mode 100644
-index 0000000..946c728
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -0,0 +1,60 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Luxul XWC-1000
-+ *
-+ * Copyright 2014 Luxul Inc.
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+
-+/ {
-+	compatible = "luxul,xwc-1000", "brcm,bcm4708";
-+	model = "Luxul XWC-1000 (BCM4708)";
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200";
-+	};
-+
-+	memory {
-+		reg = <0x00000000 0x08000000>;
-+	};
-+
-+	axi@18000000 {
-+		nand@28000 {
-+			reg = <0x00028000 0x1000>;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			partition@0 {
-+				label = "ubi";
-+				reg = <0x00000000 0x08000000>;
-+			};
-+		};
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		status {
-+			label = "bcm53xx:green:status";
-+			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "timer";
-+		};
-+	};
-+
-+	gpio-keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		restart {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
--- 
-1.8.4.5
-
diff --git a/target/linux/bcm53xx/patches-3.14/053-ARM-BCM5301X-Drop-unused-poll-interval-from-gpio-key.patch b/target/linux/bcm53xx/patches-3.14/053-ARM-BCM5301X-Drop-unused-poll-interval-from-gpio-key.patch
deleted file mode 100644
index 177b360..0000000
--- a/target/linux/bcm53xx/patches-3.14/053-ARM-BCM5301X-Drop-unused-poll-interval-from-gpio-key.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From 78b745a4b05c920beaa66dfb140af134b5fc2425 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 14 Jan 2015 08:20:48 +0100
-Subject: [PATCH] ARM: BCM5301X: Drop unused poll-interval from gpio-keys
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It was accidentally left (& copied & pasted all around) from our
-experiments with gpio-keys-polled.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts  | 1 -
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts        | 1 -
- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts     | 1 -
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts        | 1 -
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 1 -
- 5 files changed, 5 deletions(-)
-
-diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-index 5fc0fae..13d51a9 100644
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -27,7 +27,6 @@
- 		compatible = "gpio-keys";
- 		#address-cells = <1>;
- 		#size-cells = <0>;
--		poll-interval = <200>;
- 
- 		restart {
- 			label = "Reset";
-diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-index 4ed7de1..f18c9d9 100644
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -71,7 +71,6 @@
- 		compatible = "gpio-keys";
- 		#address-cells = <1>;
- 		#size-cells = <0>;
--		poll-interval = <200>;
- 
- 		wps {
- 			label = "WPS";
-diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-index 12fc2a01..3991042 100644
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -61,7 +61,6 @@
- 		compatible = "gpio-keys";
- 		#address-cells = <1>;
- 		#size-cells = <0>;
--		poll-interval = <200>;
- 
- 		wps {
- 			label = "WPS";
-diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-index fb76378..0ee85ea 100644
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -61,7 +61,6 @@
- 		compatible = "gpio-keys";
- 		#address-cells = <1>;
- 		#size-cells = <0>;
--		poll-interval = <200>;
- 
- 		restart {
- 			label = "Reset";
-diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-index bbb414f..e23dbbf 100644
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -27,7 +27,6 @@
- 		compatible = "gpio-keys";
- 		#address-cells = <1>;
- 		#size-cells = <0>;
--		poll-interval = <200>;
- 
- 		aoss {
- 			label = "AOSS";
--- 
-1.8.4.5
-
diff --git a/target/linux/bcm53xx/patches-3.14/054-ARM-BCM5301X-Add-LEDs-for-Buffalo-devices.patch b/target/linux/bcm53xx/patches-3.14/054-ARM-BCM5301X-Add-LEDs-for-Buffalo-devices.patch
deleted file mode 100644
index d9a6607..0000000
--- a/target/linux/bcm53xx/patches-3.14/054-ARM-BCM5301X-Add-LEDs-for-Buffalo-devices.patch
+++ /dev/null
@@ -1,174 +0,0 @@
-From 8115a4e8d687427fbc1aa3774f50551563bf87f9 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 14 Jan 2015 08:20:49 +0100
-Subject: [PATCH] ARM: BCM5301X: Add LEDs for Buffalo devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts  | 67 ++++++++++++++++++++++
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 67 ++++++++++++++++++++++
- 2 files changed, 134 insertions(+)
-
-diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-index 13d51a9..b359c1e 100644
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -23,6 +23,73 @@
- 		reg = <0x00000000 0x08000000>;
- 	};
- 
-+	spi {
-+		compatible = "spi-gpio";
-+		num-chipselects = <1>;
-+		gpio-sck = <&chipcommon 7 0>;
-+		gpio-mosi = <&chipcommon 4 0>;
-+		cs-gpios = <&chipcommon 6 0>;
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		hc595: gpio_spi@0 {
-+			compatible = "fairchild,74hc595";
-+			reg = <0>;
-+			registers-number = <1>;
-+			spi-max-frequency = <100000>;
-+
-+			gpio-controller;
-+			#gpio-cells = <2>;
-+
-+		};
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		power0 {
-+			label = "bcm53xx:red:power";
-+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "default-off";
-+		};
-+
-+		power1 {
-+			label = "bcm53xx:white:power";
-+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "default-on";
-+		};
-+
-+		router0 {
-+			label = "bcm53xx:blue:router";
-+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "default-on";
-+		};
-+
-+		router1 {
-+			label = "bcm53xx:amber:router";
-+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "default-off";
-+		};
-+
-+		wan {
-+			label = "bcm53xx:blue:wan";
-+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "default-on";
-+		};
-+
-+		wireless0 {
-+			label = "bcm53xx:blue:wireless";
-+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "default-off";
-+		};
-+
-+		wireless1 {
-+			label = "bcm53xx:amber:wireless";
-+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "default-off";
-+		};
-+	};
-+
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 		#address-cells = <1>;
-diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-index e23dbbf..db9131e 100644
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -23,6 +23,73 @@
- 		reg = <0x00000000 0x08000000>;
- 	};
- 
-+	spi {
-+		compatible = "spi-gpio";
-+		num-chipselects = <1>;
-+		gpio-sck = <&chipcommon 7 0>;
-+		gpio-mosi = <&chipcommon 4 0>;
-+		cs-gpios = <&chipcommon 6 0>;
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		hc595: gpio_spi@0 {
-+			compatible = "fairchild,74hc595";
-+			reg = <0>;
-+			registers-number = <1>;
-+			spi-max-frequency = <100000>;
-+
-+			gpio-controller;
-+			#gpio-cells = <2>;
-+
-+		};
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		power0 {
-+			label = "bcm53xx:green:power";
-+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "default-on";
-+		};
-+
-+		power1 {
-+			label = "bcm53xx:red:power";
-+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "default-off";
-+		};
-+
-+		router0 {
-+			label = "bcm53xx:green:router";
-+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "default-on";
-+		};
-+
-+		router1 {
-+			label = "bcm53xx:amber:router";
-+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "default-off";
-+		};
-+
-+		wan {
-+			label = "bcm53xx:green:wan";
-+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "default-on";
-+		};
-+
-+		wireless0 {
-+			label = "bcm53xx:green:wireless";
-+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "default-off";
-+		};
-+
-+		wireless1 {
-+			label = "bcm53xx:amber:wireless";
-+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "default-off";
-+		};
-+	};
-+
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 		#address-cells = <1>;
--- 
-1.8.4.5
-
diff --git a/target/linux/bcm53xx/patches-3.14/055-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch b/target/linux/bcm53xx/patches-3.14/055-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch
deleted file mode 100644
index 70b3813..0000000
--- a/target/linux/bcm53xx/patches-3.14/055-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 5b1864b899d2b591402704dd0f6528c8661f1817 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Tue, 20 Jan 2015 22:42:16 +0100
-Subject: [PATCH] ARM: BCM5301X: Add DT for Buffalo WZR-900DHP
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/Makefile                        |  3 +-
- arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 37 +++++++++++++++++++++++
- 2 files changed, 39 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index ff4a5ae..0de664e 100644
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -56,7 +56,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm4708-netgear-r6250.dtb \
- 	bcm4708-netgear-r6300-v2.dtb \
- 	bcm47081-asus-rt-n18u.dtb \
--	bcm47081-buffalo-wzr-600dhp2.dtb
-+	bcm47081-buffalo-wzr-600dhp2.dtb \
-+	bcm47081-buffalo-wzr-900dhp.dtb
- dtb-$(CONFIG_ARCH_BERLIN) += \
- 	berlin2-sony-nsz-gs7.dtb	\
- 	berlin2cd-google-chromecast.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -0,0 +1,37 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Buffalo WZR-900DHP
-+ *
-+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47081.dtsi"
-+
-+/ {
-+	compatible = "buffalo,wzr-900dhp", "brcm,bcm47081", "brcm,bcm4708";
-+	model = "Buffalo WZR-900DHP (BCM47081)";
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200";
-+	};
-+
-+	memory {
-+		reg = <0x00000000 0x08000000>;
-+	};
-+
-+	gpio-keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		restart {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
--- 
-1.8.4.5
-
diff --git a/target/linux/bcm53xx/patches-3.14/110-firmware-backport-NVRAM-driver.patch b/target/linux/bcm53xx/patches-3.14/110-firmware-backport-NVRAM-driver.patch
deleted file mode 100644
index eeabb54..0000000
--- a/target/linux/bcm53xx/patches-3.14/110-firmware-backport-NVRAM-driver.patch
+++ /dev/null
@@ -1,119 +0,0 @@
-From 0509f6dcc46d10ea4bb8c70494dc7ae11bcb3f01 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 10 Dec 2014 21:14:10 +0100
-Subject: [PATCH] firmware: backport NVRAM driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- arch/arm/Kconfig                          | 2 ++
- drivers/firmware/Kconfig                  | 1 +
- drivers/firmware/Makefile                 | 1 +
- drivers/firmware/broadcom/bcm47xx_nvram.c | 3 ++-
- drivers/net/ethernet/broadcom/b44.c       | 2 +-
- drivers/net/ethernet/broadcom/bgmac.c     | 2 +-
- drivers/ssb/driver_chipcommon_pmu.c       | 2 +-
- 7 files changed, 9 insertions(+), 4 deletions(-)
-
-diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
-index 4733d32..ab18030 100644
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -2286,6 +2286,8 @@ source "net/Kconfig"
- 
- source "drivers/Kconfig"
- 
-+source "drivers/firmware/Kconfig"
-+
- source "fs/Kconfig"
- 
- source "arch/arm/Kconfig.debug"
-diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
-index 4198388..ffbc9e4 100644
---- a/drivers/firmware/Kconfig
-+++ b/drivers/firmware/Kconfig
-@@ -132,6 +132,7 @@ config ISCSI_IBFT
- 	  detect iSCSI boot parameters dynamically during system boot, say Y.
- 	  Otherwise, say N.
- 
-+source "drivers/firmware/broadcom/Kconfig"
- source "drivers/firmware/google/Kconfig"
- source "drivers/firmware/efi/Kconfig"
- 
-diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
-index 5373dc5..e251f2b 100644
---- a/drivers/firmware/Makefile
-+++ b/drivers/firmware/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_ISCSI_IBFT_FIND)	+= iscsi_ibft_find.o
- obj-$(CONFIG_ISCSI_IBFT)	+= iscsi_ibft.o
- obj-$(CONFIG_FIRMWARE_MEMMAP)	+= memmap.o
- 
-+obj-y				+= broadcom/
- obj-$(CONFIG_GOOGLE_FIRMWARE)	+= google/
- obj-$(CONFIG_EFI)		+= efi/
- obj-$(CONFIG_UEFI_CPER)		+= efi/
-diff --git a/drivers/firmware/broadcom/bcm47xx_nvram.c b/drivers/firmware/broadcom/bcm47xx_nvram.c
-index b6e1cc7..8ca7358 100644
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -11,6 +11,7 @@
-  * option) any later version.
-  */
- 
-+#include <linux/io.h>
- #include <linux/types.h>
- #include <linux/module.h>
- #include <linux/kernel.h>
-@@ -34,7 +35,7 @@ struct nvram_header {
- };
- 
- static char nvram_buf[NVRAM_SPACE];
--static const u32 nvram_sizes[] = {0x8000, 0xF000, 0x10000};
-+static const u32 nvram_sizes[] = {0x8000, 0xF000, 0x10000, 0x160000, 0x180000};
- 
- static u32 find_nvram_size(void __iomem *end)
- {
-diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c
-index 8a7bf7d..bf3bcd6 100644
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -400,7 +400,7 @@ static void b44_set_flow_ctrl(struct b44 *bp, u32 local, u32 remote)
- }
- 
- #ifdef CONFIG_BCM47XX
--#include <bcm47xx_nvram.h>
-+#include <linux/bcm47xx_nvram.h>
- static void b44_wap54g10_workaround(struct b44 *bp)
- {
- 	char buf[20];
-diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c
-index 34c7bc8..943707f 100644
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -17,7 +17,7 @@
- #include <linux/interrupt.h>
- #include <linux/dma-mapping.h>
- #include <linux/platform_data/b53.h>
--#include <bcm47xx_nvram.h>
-+#include <linux/bcm47xx_nvram.h>
- 
- static const struct bcma_device_id bgmac_bcma_tbl[] = {
- 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS),
-diff --git a/drivers/ssb/driver_chipcommon_pmu.c b/drivers/ssb/driver_chipcommon_pmu.c
-index 1173a09..0942841 100644
---- a/drivers/ssb/driver_chipcommon_pmu.c
-+++ b/drivers/ssb/driver_chipcommon_pmu.c
-@@ -14,7 +14,7 @@
- #include <linux/delay.h>
- #include <linux/export.h>
- #ifdef CONFIG_BCM47XX
--#include <bcm47xx_nvram.h>
-+#include <linux/bcm47xx_nvram.h>
- #endif
- 
- #include "ssb_private.h"
--- 
-1.8.4.5
-
diff --git a/target/linux/bcm53xx/patches-3.14/112-bcm53xx-sprom-add-sprom-driver.patch b/target/linux/bcm53xx/patches-3.14/112-bcm53xx-sprom-add-sprom-driver.patch
deleted file mode 100644
index e316a66..0000000
--- a/target/linux/bcm53xx/patches-3.14/112-bcm53xx-sprom-add-sprom-driver.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From 4e0ab3269a6d260a41a3673157753147f5f71341 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 4 May 2014 13:19:20 +0200
-Subject: [PATCH 03/17] bcm47xx-sprom: add Broadcom sprom parser driver
-
-This driver needs an nvram driver and fetches the sprom values from the
-nvram and provides it to any other driver. The calibration data for the
-wifi chip the mac address and some more board description data is
-stores in the sprom.
-
-This is based on a copy of arch/mips/bcm47xx/sprom.c and my plan is to
-make the bcm47xx MIPS SoCs also use this driver some time later.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- .../devicetree/bindings/misc/bcm47xx-sprom.txt     |  16 +
- drivers/misc/Kconfig                               |  11 +
- drivers/misc/Makefile                              |   1 +
- drivers/misc/bcm47xx-sprom.c                       | 690 +++++++++++++++++++++
- 4 files changed, 718 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/misc/bcm47xx-sprom.txt
- create mode 100644 drivers/misc/bcm47xx-sprom.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/misc/bcm47xx-sprom.txt
-@@ -0,0 +1,16 @@
-+Broadcom bcm47xx/bcm53xx sprom converter
-+
-+This driver provbides an sprom based on a given nvram.
-+
-+Required properties:
-+
-+- compatible : brcm,bcm47xx-sprom
-+
-+- nvram : reference to a nvram driver, e.g. bcm47xx-nvram
-+
-+Example:
-+
-+sprom0: sprom@0 {
-+	compatible = "brcm,bcm47xx-sprom";
-+	nvram = <&nvram0>;
-+};
---- a/drivers/misc/Kconfig
-+++ b/drivers/misc/Kconfig
-@@ -515,6 +515,17 @@ config SRAM
- 	  the genalloc API. It is supposed to be used for small on-chip SRAM
- 	  areas found on many SoCs.
- 
-+config BCM47XX_SPROM
-+	tristate "BCM47XX sprom driver"
-+	help
-+	  This driver parses the sprom from a given nvram which is found on
-+	  Broadcom bcm47xx and bcm53xx SoCs.
-+
-+	  The sprom contains board configuration data like the
-+	  calibration data fro the wifi chips, the mac addresses used
-+	  by the board and many other board configuration data. This
-+	  driver will provide the sprom to bcma.
-+
- source "drivers/misc/c2port/Kconfig"
- source "drivers/misc/eeprom/Kconfig"
- source "drivers/misc/cb710/Kconfig"
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -54,3 +54,4 @@ obj-$(CONFIG_LATTICE_ECP3_CONFIG)	+= lat
- obj-$(CONFIG_SRAM)		+= sram.o
- obj-y				+= mic/
- obj-$(CONFIG_GENWQE)		+= genwqe/
-+obj-$(CONFIG_BCM47XX_SPROM)	+= bcm47xx-sprom.o
diff --git a/target/linux/bcm53xx/patches-3.14/130-ARM-BCM5301X-register-bcma-bus.patch b/target/linux/bcm53xx/patches-3.14/130-ARM-BCM5301X-register-bcma-bus.patch
deleted file mode 100644
index 4044b44..0000000
--- a/target/linux/bcm53xx/patches-3.14/130-ARM-BCM5301X-register-bcma-bus.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From 414f0ad9b3a8e8ee6eaf09c6d79d5f448ac28630 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 25 Jan 2014 17:03:07 +0100
-Subject: [PATCH 07/17] ARM: BCM5301X: register bcma bus
-
----
- arch/arm/boot/dts/bcm4708.dtsi | 58 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 58 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -95,12 +95,23 @@
- 		};
- 	};
- 
-+	nvram0: nvram@1c000000 {
-+		compatible = "brcm,bcm47xx-nvram";
-+		reg = <0x1c000000 0x01000000>;
-+	};
-+
-+	sprom0: sprom@0 {
-+		compatible = "brcm,bcm47xx-sprom";
-+		nvram = <&nvram0>;
-+	};
-+
- 	axi@18000000 {
- 		compatible = "brcm,bus-axi";
- 		reg = <0x18000000 0x1000>;
- 		ranges = <0x00000000 0x18000000 0x00100000>;
- 		#address-cells = <1>;
- 		#size-cells = <1>;
-+		sprom = <&sprom0>;
- 
- 		#interrupt-cells = <1>;
- 		interrupt-map-mask = <0x000fffff 0xffff>;
-@@ -108,6 +119,30 @@
- 			/* ChipCommon */
- 			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
- 
-+			/* PCIe Controller 0 */
-+			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-+
-+			/* PCIe Controller 1 */
-+			<0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-+
-+			/* PCIe Controller 2 */
-+			<0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-+
- 			/* USB 2.0 Controller */
- 			<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
- 
diff --git a/target/linux/bcm53xx/patches-3.14/131-ARM-BCM5301X-add-restart-support.patch b/target/linux/bcm53xx/patches-3.14/131-ARM-BCM5301X-add-restart-support.patch
deleted file mode 100644
index 792d4b9..0000000
--- a/target/linux/bcm53xx/patches-3.14/131-ARM-BCM5301X-add-restart-support.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From 28b11a8b1258214b3b5d58bb6e3bbcb0fc9fd4fe Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 31 Jul 2014 07:28:05 +0200
-Subject: [PATCH] ARM: BCM5301X: add restart support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- arch/arm/mach-bcm/bcm_5301x.c | 31 +++++++++++++++++++++++++++++++
- 1 file changed, 31 insertions(+)
-
---- a/arch/arm/mach-bcm/bcm_5301x.c
-+++ b/arch/arm/mach-bcm/bcm_5301x.c
-@@ -12,9 +12,26 @@
- #include <asm/siginfo.h>
- #include <asm/signal.h>
- 
-+#include <linux/bcma/bcma.h>
- 
- static bool first_fault = true;
- 
-+static struct bcma_bus *bcm5301x_get_bcma_bus(void)
-+{
-+	struct device_node *np;
-+	struct platform_device *pdev;
-+
-+	np = of_find_compatible_node(NULL, NULL, "brcm,bus-axi");
-+	if (!np)
-+		return NULL;
-+
-+	pdev = of_find_device_by_node(np);
-+	if (!pdev)
-+		return NULL;
-+
-+	return platform_get_drvdata(pdev);
-+}
-+
- static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr,
- 				 struct pt_regs *regs)
- {
-@@ -49,6 +66,19 @@ static void __init bcm5301x_dt_init(void
- 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
- }
- 
-+static void bcm5301x_restart(enum reboot_mode mode, const char *cmd)
-+{
-+	struct bcma_bus *bus = bcm5301x_get_bcma_bus();
-+
-+	if (bus)
-+		bcma_chipco_watchdog_timer_set(&bus->drv_cc, 1);
-+	else
-+		pr_warn("Unable to access bcma bus\n");
-+
-+	while (1)
-+		;
-+}
-+
- static const char __initconst *bcm5301x_dt_compat[] = {
- 	"brcm,bcm4708",
- 	NULL,
-@@ -57,5 +87,6 @@ static const char __initconst *bcm5301x_
- DT_MACHINE_START(BCM5301X, "BCM5301X")
- 	.init_early	= bcm5301x_init_early,
- 	.init_machine	= bcm5301x_dt_init,
-+	.restart	= bcm5301x_restart,
- 	.dt_compat	= bcm5301x_dt_compat,
- MACHINE_END
diff --git a/target/linux/bcm53xx/patches-3.14/150-pci-do-not-probe-too-early.patch b/target/linux/bcm53xx/patches-3.14/150-pci-do-not-probe-too-early.patch
deleted file mode 100644
index 8413e91..0000000
--- a/target/linux/bcm53xx/patches-3.14/150-pci-do-not-probe-too-early.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From cf72936c001056de1cfcb27dd9a232f5484ec59c Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 29 May 2014 20:54:15 +0200
-Subject: [PATCH 12/17] pci: do not probe too early
-
-Probing is done before the PCIe bridge is fully activated and the
-address spaces does not get assigned to the PCIe devices. Without the
-address space the driver can not register to this device. With this
-patch the driver reregistration is done later.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/pci/probe.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/pci/probe.c
-+++ b/drivers/pci/probe.c
-@@ -1915,7 +1915,10 @@ struct pci_bus *pci_scan_root_bus(struct
- 	if (!found)
- 		pci_bus_update_busn_res_end(b, max);
- 
--	pci_bus_add_devices(b);
-+	/* this should be done in arch/arm/kernel/bios32.c, because the
-+	   resources for the PCI devices are initilized later and doing
-+	   it here will fail. */
-+	/* pci_bus_add_devices(b); */
- 	return b;
- }
- EXPORT_SYMBOL(pci_scan_root_bus);
diff --git a/target/linux/bcm53xx/patches-3.14/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch b/target/linux/bcm53xx/patches-3.14/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch
deleted file mode 100644
index d3e1a59..0000000
--- a/target/linux/bcm53xx/patches-3.14/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch
+++ /dev/null
@@ -1,535 +0,0 @@
-From cf067bf8bb993d6cfdc42d750ae241c43f88403f Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Mon, 12 May 2014 11:55:20 +0200
-Subject: [PATCH 1/2] PCI: BCM5301X: add PCIe2 driver for BCM5301X SoCs
-
-This driver supports the PCIe controller found on the BCM4708 and
-similar SoCs. The controller itself is automatically detected by bcma.
-
-This controller is found on SoCs usually used in SOHO routers to
-connect the wifi cards to the SoC. All the of the BCM5301X SoCs I know
-of have 2 or 3 of these controllers in the SoC.
-
-I had to use PCI domains otherwise the pci_create_root_bus() function
-in drivers/pci/probe.c would fail for the second controller being
-registered because pci_find_bus() would find the same PCIe bus again
-and assume it is already registered, which ends up in a kernel panic in
-pcibios_init_hw() in arch/arm/kernel/bios32.c
-
-The ARM PCI code assumes that every controller has an I/O space and
-adds a dummy area if the driver does not specify one. This will work
-for the first controller, but when we register the second one this will
-result in an error. To prevent this problem we add an empty I/O space.
-
-Currently I have problems with probing the devices on the bus, because
-pci_bus_add_devices() is called too early in pci_scan_root_bus() in
-drivers/pci/probe.c, before pci_bus_assign_resources() was called in
-pci_common_init_dev() in arch/arm/kernel/bios32.c. When the devices are
-added too early they do not have any resources and adding fails. I have
-to remove the call to pci_bus_add_devices() in pci_scan_root_bus() to
-make registration work, calling pci_bus_add_devices() later again does
-not fix this problem.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/mach-bcm/Kconfig            |   1 +
- drivers/pci/host/Kconfig             |   7 +
- drivers/pci/host/Makefile            |   1 +
- drivers/pci/host/pci-host-bcm5301x.c | 428 +++++++++++++++++++++++++++++++++++
- 4 files changed, 437 insertions(+)
- create mode 100644 drivers/pci/host/pci-host-bcm5301x.c
-
---- a/arch/arm/mach-bcm/Kconfig
-+++ b/arch/arm/mach-bcm/Kconfig
-@@ -45,6 +45,7 @@ config ARCH_BCM_5301X
- 	select ARM_GLOBAL_TIMER
- 	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
- 	select MIGHT_HAVE_PCI
-+	select PCI_DOMAINS if PCI
- 	help
- 	  Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
- 
---- a/drivers/pci/host/Kconfig
-+++ b/drivers/pci/host/Kconfig
-@@ -33,4 +33,11 @@ config PCI_RCAR_GEN2
- 	  There are 3 internal PCI controllers available with a single
- 	  built-in EHCI/OHCI host controller present on each one.
- 
-+config PCI_BCM5301X
-+	bool "BCM5301X PCIe2 host controller"
-+	depends on BCMA && OF && ARM && PCI_DOMAINS
-+	help
-+	  Say Y here if you want to support the PCIe host controller found
-+	  on Broadcom BCM5301X and BCM470X (Northstar) SoCs.
-+
- endmenu
---- a/drivers/pci/host/Makefile
-+++ b/drivers/pci/host/Makefile
-@@ -4,3 +4,4 @@ obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
- obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
- obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
- obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
-+obj-$(CONFIG_PCI_BCM5301X) += pci-host-bcm5301x.o
---- /dev/null
-+++ b/drivers/pci/host/pci-host-bcm5301x.c
-@@ -0,0 +1,460 @@
-+/*
-+ * Northstar PCI-Express driver
-+ * Only supports Root-Complex (RC) mode
-+ *
-+ * Notes:
-+ * PCI Domains are being used to identify the PCIe port 1:1.
-+ *
-+ * Only MEM access is supported, PAX does not support IO.
-+ *
-+ * Copyright 2012-2014, Broadcom Corporation
-+ * Copyright 2014, Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+#include <linux/pci.h>
-+#include <linux/io.h>
-+#include <linux/ioport.h>
-+#include <linux/bcma/bcma.h>
-+#include <linux/bcma/bcma_driver_pcie2.h>
-+
-+#define	SOC_PCIE_HDR_OFF	0x400	/* 256 bytes per function */
-+
-+#define PCI_LINK_STATUS_CTRL_2_OFFSET 0xDC
-+#define PCI_TARGET_LINK_SPEED_MASK    0xF
-+#define PCI_TARGET_LINK_SPEED_GEN2    0x2
-+#define PCI_TARGET_LINK_SPEED_GEN1    0x1
-+
-+static int bcma_pcie2_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
-+{
-+	struct pci_sys_data *sys = pdev->sysdata;
-+	struct bcma_device *bdev = sys->private_data;
-+
-+	return bcma_core_irq(bdev, 5);
-+}
-+
-+static u32 bcma_pcie2_cfg_base(struct bcma_device *bdev, int busno,
-+			       unsigned int devfn, int where)
-+{
-+	int slot = PCI_SLOT(devfn);
-+	int fn = PCI_FUNC(devfn);
-+	u32 addr_reg;
-+
-+	if (busno == 0) {
-+		if (slot >= 1)
-+			return 0;
-+		bcma_write32(bdev, BCMA_CORE_PCIE2_CONFIGINDADDR,
-+			     where & 0xffc);
-+		return BCMA_CORE_PCIE2_CONFIGINDDATA;
-+	}
-+	if (fn > 1)
-+		return 0;
-+	addr_reg = (busno & 0xff) << 20 | (slot << 15) | (fn << 12) |
-+		   (where & 0xffc) | (1 & 0x3);
-+
-+	bcma_write32(bdev, BCMA_CORE_PCIE2_CFG_ADDR, addr_reg);
-+	return BCMA_CORE_PCIE2_CFG_DATA;
-+}
-+
-+static u32 bcma_pcie2_read_config(struct bcma_device *bdev, int busno,
-+				  unsigned int devfn, int where, int size)
-+{
-+	u32 base;
-+	u32 data_reg;
-+	u32 mask;
-+	int shift;
-+
-+	base = bcma_pcie2_cfg_base(bdev, busno, devfn, where);
-+
-+	if (!base)
-+		return ~0UL;
-+
-+	data_reg = bcma_read32(bdev, base);
-+
-+	if (size == 4)
-+		return data_reg;
-+
-+	mask = (1 << (size * 8)) - 1;
-+	shift = (where % 4) * 8;
-+	return (data_reg >> shift) & mask;
-+}
-+
-+static void bcma_pcie2_write_config(struct bcma_device *bdev, int busno,
-+				    unsigned int devfn, int where, int size,
-+				    u32 val)
-+{
-+	u32 base;
-+	u32 data_reg;
-+
-+	base = bcma_pcie2_cfg_base(bdev, busno, devfn, where);
-+
-+	if (!base)
-+		return;
-+
-+	if (size < 4) {
-+		u32 mask = (1 << (size * 8)) - 1;
-+		int shift = (where % 4) * 8;
-+
-+		data_reg = bcma_read32(bdev, base);
-+		data_reg &= ~(mask << shift);
-+		data_reg |= (val & mask) << shift;
-+	} else {
-+		data_reg = val;
-+	}
-+
-+	bcma_write32(bdev, base, data_reg);
-+}
-+
-+static int bcma_pcie2_read_config_pci(struct pci_bus *bus, unsigned int devfn,
-+				   int where, int size, u32 *val)
-+{
-+	struct pci_sys_data *sys = bus->sysdata;
-+	struct bcma_device *bdev = sys->private_data;
-+
-+	*val = bcma_pcie2_read_config(bdev, bus->number, devfn, where, size);
-+
-+	return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int bcma_pcie2_write_config_pci(struct pci_bus *bus, unsigned int devfn,
-+				    int where, int size, u32 val)
-+{
-+	struct pci_sys_data *sys = bus->sysdata;
-+	struct bcma_device *bdev = sys->private_data;
-+
-+	bcma_pcie2_write_config(bdev, bus->number, devfn, where, size, val);
-+
-+	return PCIBIOS_SUCCESSFUL;
-+}
-+
-+/*
-+ * Methods for accessing configuration registers
-+ */
-+static struct pci_ops bcma_pcie2_ops = {
-+	.read = bcma_pcie2_read_config_pci,
-+	.write = bcma_pcie2_write_config_pci,
-+};
-+
-+/* NS: CLASS field is R/O, and set to wrong 0x200 value */
-+static void bcma_pcie2_fixup_class(struct pci_dev *dev)
-+{
-+	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
-+}
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x8011, bcma_pcie2_fixup_class);
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x8012, bcma_pcie2_fixup_class);
-+
-+/*
-+ * Check link status, return 0 if link is up in RC mode,
-+ * otherwise return non-zero
-+ */
-+static int bcma_pcie2_check_link(struct bcma_device *bdev, struct pci_sys_data *sys)
-+{
-+	u32 tmp32;
-+	u16 tmp16;
-+	u16 pos;
-+	u8 nlw;
-+	/*
-+	 * Setup callback (bcma_pcie2_setup) is called in pcibios_init_hw before
-+	 * creating bus root, so we don't have it here yet. On the other hand
-+	 * we really want to use pci_bus_find_capability helper to check NLW.
-+	 * Let's fake simple pci_bus just to query for capabilities.
-+	 */
-+	struct pci_bus bus = {
-+		.number = 0,
-+		.ops = &bcma_pcie2_ops,
-+		.sysdata = sys,
-+	};
-+
-+	tmp32 = bcma_read32(bdev, BCMA_CORE_PCIE2_LINK_STATUS);
-+	dev_dbg(&bdev->dev, "link status: 0x%08x\n", tmp32);
-+
-+	tmp32 = bcma_read32(bdev, BCMA_CORE_PCIE2_STRAP_STATUS);
-+	dev_dbg(&bdev->dev, "strap status: 0x%08x\n", tmp32);
-+
-+	/* check link status to see if link is active */
-+	pos = pci_bus_find_capability(&bus, 0, PCI_CAP_ID_EXP);
-+	pci_bus_read_config_word(&bus, 0, pos + PCI_EXP_LNKSTA, &tmp16);
-+	nlw = (tmp16 & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT;
-+
-+	if (nlw == 0) {
-+		/* try GEN 1 link speed */
-+		tmp32 = bcma_pcie2_read_config(bdev, 0, 0,
-+					PCI_LINK_STATUS_CTRL_2_OFFSET, 4);
-+		if ((tmp32 & PCI_TARGET_LINK_SPEED_MASK) ==
-+				PCI_TARGET_LINK_SPEED_GEN2) {
-+			tmp32 &= ~PCI_TARGET_LINK_SPEED_MASK;
-+			tmp32 |= PCI_TARGET_LINK_SPEED_GEN1;
-+			bcma_pcie2_write_config(bdev, 0, 0,
-+					PCI_LINK_STATUS_CTRL_2_OFFSET, 4, tmp32);
-+			tmp32 = bcma_pcie2_read_config(bdev, 0, 0,
-+					PCI_LINK_STATUS_CTRL_2_OFFSET, 4);
-+			msleep(100);
-+
-+			pos = pci_bus_find_capability(&bus, 0, PCI_CAP_ID_EXP);
-+			pci_bus_read_config_word(&bus, 0, pos + PCI_EXP_LNKSTA,
-+					&tmp16);
-+			nlw = (tmp16 & PCI_EXP_LNKSTA_NLW) >>
-+				PCI_EXP_LNKSTA_NLW_SHIFT;
-+		}
-+	}
-+
-+	dev_info(&bdev->dev, "link: %s\n", nlw ? "UP" : "DOWN");
-+	return nlw ? 0 : -ENODEV;
-+}
-+
-+/*
-+ * Initializte the PCIe controller
-+ */
-+static void bcma_pcie2_hw_init(struct bcma_device *bdev)
-+{
-+	u32 tmp32;
-+	u16 tmp16;
-+
-+	/* Change MPS and MRRS to 512 */
-+	tmp16 = bcma_pcie2_read_config(bdev, 0, 0, 0x4d4, 2);
-+	tmp16 &= ~7;
-+	tmp16 |= 2;
-+	bcma_pcie2_write_config(bdev, 0, 0, 0x4d4, 2, tmp16);
-+
-+	tmp32 = bcma_pcie2_read_config(bdev, 0, 0, 0xb4, 4);
-+	tmp32 &= ~((7 << 12) | (7 << 5));
-+	tmp32 |= (2 << 12) | (2 << 5);
-+	bcma_pcie2_write_config(bdev, 0, 0, 0xb4, 4, tmp32);
-+
-+	/*
-+	 * Turn-on Root-Complex (RC) mode, from reset default of EP
-+	 * The mode is set by straps, can be overwritten via DMU
-+	 * register <cru_straps_control> bit 5, "1" means RC
-+	 */
-+
-+	/* Send a downstream reset */
-+	bcma_write32(bdev, BCMA_CORE_PCIE2_CLK_CONTROL,
-+		     PCIE2_CLKC_RST_OE | PCIE2_CLKC_RST);
-+	usleep_range(250, 400);
-+	bcma_write32(bdev, BCMA_CORE_PCIE2_CLK_CONTROL, PCIE2_CLKC_RST_OE);
-+	msleep(250);
-+
-+	/* TBD: take care of PM, check we're on */
-+}
-+
-+/*
-+ * Setup the address translation
-+ *
-+ * NOTE: All PCI-to-CPU address mapping are 1:1 for simplicity
-+ */
-+static int bcma_pcie2_map_init(struct bcma_device *bdev, u32 addr)
-+{
-+	/* 64MB alignment */
-+	if (!addr || (addr & (SZ_64M - 1)))
-+		return -EINVAL;
-+
-+	bcma_write32(bdev, BCMA_CORE_PCIE2_OMAP0_LOWER, addr);
-+	bcma_write32(bdev, BCMA_CORE_PCIE2_OARR0, addr | 0x01);
-+
-+	bcma_write32(bdev, BCMA_CORE_PCIE2_OMAP1_LOWER, addr + SZ_64M);
-+	bcma_write32(bdev, BCMA_CORE_PCIE2_OARR1, (addr + SZ_64M) | 0x01);
-+
-+	/*
-+	 * Inbound address translation setup
-+	 * Northstar only maps up to 128 MiB inbound, DRAM could be up to 1 GiB.
-+	 *
-+	 * For now allow access to entire DRAM, assuming it is less than 128MiB,
-+	 * otherwise DMA bouncing mechanism may be required.
-+	 * Also consider DMA mask to limit DMA physical address
-+	 */
-+	/* 64-bit LE regs, write low word, high is 0 at reset */
-+	bcma_write32(bdev, BCMA_CORE_PCIE2_FUNC0_IMAP1, PHYS_OFFSET | 0x1);
-+	bcma_write32(bdev, BCMA_CORE_PCIE2_IARR1_LOWER,
-+			   PHYS_OFFSET | ((SZ_128M >> 20) & 0xff));
-+	return 0;
-+}
-+
-+/*
-+ * Setup PCIE Host bridge
-+ */
-+static int bcma_pcie2_bridge_init(struct bcma_device *bdev, u32 addr, u32 size)
-+{
-+	bcma_pcie2_write_config(bdev, 0, 0, PCI_PRIMARY_BUS, 1, 0);
-+	bcma_pcie2_write_config(bdev, 0, 0, PCI_SECONDARY_BUS, 1, 1);
-+	bcma_pcie2_write_config(bdev, 0, 0, PCI_SUBORDINATE_BUS, 1, 4);
-+
-+	bcma_pcie2_read_config(bdev, 0, 0, PCI_PRIMARY_BUS, 1);
-+	bcma_pcie2_read_config(bdev, 0, 0, PCI_SECONDARY_BUS, 1);
-+	bcma_pcie2_read_config(bdev, 0, 0, PCI_SUBORDINATE_BUS, 1);
-+
-+	/* MEM_BASE, MEM_LIM require 1MB alignment */
-+	if (((addr >> 16) & 0xf) || (((addr + size) >> 16) & 0xf))
-+		return -EINVAL;
-+
-+	bcma_pcie2_write_config(bdev, 0, 0, PCI_MEMORY_BASE, 2, addr >> 16);
-+	bcma_pcie2_write_config(bdev, 0, 0, PCI_MEMORY_LIMIT, 2,
-+				(addr + size) >> 16);
-+
-+	/* These registers are not supported on the NS */
-+	bcma_pcie2_write_config(bdev, 0, 0, PCI_IO_BASE_UPPER16, 2, 0);
-+	bcma_pcie2_write_config(bdev, 0, 0, PCI_IO_LIMIT_UPPER16, 2, 0);
-+
-+	/* Force class to that of a Bridge */
-+	bcma_pcie2_write_config(bdev, 0, 0, PCI_CLASS_DEVICE, 2,
-+				PCI_CLASS_BRIDGE_PCI);
-+
-+	bcma_pcie2_read_config(bdev, 0, 0, PCI_CLASS_DEVICE, 2);
-+	bcma_pcie2_read_config(bdev, 0, 0, PCI_MEMORY_BASE, 2);
-+	bcma_pcie2_read_config(bdev, 0, 0, PCI_MEMORY_LIMIT, 2);
-+	return 0;
-+}
-+
-+static void bcma_pcie2_3rd_init(struct bcma_bus *bus)
-+{
-+	/* PCIE PLL block register (base 0x8000) */
-+	bcma_chipco_b_mii_write(&bus->drv_cc_b, 0x00000088, 0x57fe8000);
-+	/* Check PCIE PLL lock status */
-+	bcma_chipco_b_mii_write(&bus->drv_cc_b, 0x00000088, 0x67c60000);
-+}
-+
-+/* To improve PCIE phy jitter */
-+static void bcma_pcie2_improve_phy_jitter(struct bcma_bus *bus, int phyaddr)
-+{
-+	u32 val;
-+
-+	/* Change blkaddr */
-+	val = (1 << 30) | (1 << 28) | (phyaddr << 23) | (0x1f << 18) |
-+		(2 << 16) | (0x863 << 4);
-+	bcma_chipco_b_mii_write(&bus->drv_cc_b, 0x0000009a, val);
-+
-+	/* Write 0x0190 to 0x13 regaddr */
-+	val = (1 << 30) | (1 << 28) | (phyaddr << 23) | (0x13 << 18) |
-+		(2 << 16) | 0x0190;
-+	bcma_chipco_b_mii_write(&bus->drv_cc_b, 0x0000009a, val);
-+
-+	/* Write 0x0191 to 0x19 regaddr */
-+	val = (1 << 30) | (1 << 28) | (phyaddr << 23) | (0x19 << 18) |
-+		(2 << 16) | 0x0191;
-+	bcma_chipco_b_mii_write(&bus->drv_cc_b, 0x0000009a, val);
-+}
-+
-+static int bcma_pcie2_setup(int nr, struct pci_sys_data *sys)
-+{
-+	struct bcma_device *bdev = sys->private_data;
-+	struct bcma_bus *bus = bdev->bus;
-+	struct resource *res;
-+	struct bcma_device *arm_core;
-+	u32 cru_straps_ctrl;
-+	int ret;
-+	int phyaddr;
-+
-+	if (bdev->core_unit == 2) {
-+		arm_core = bcma_find_core(bus, BCMA_CORE_ARMCA9);
-+		cru_straps_ctrl = bcma_read32(arm_core, 0x2a0);
-+
-+		/* 3rd PCIE is not selected */
-+		if (cru_straps_ctrl & 0x10)
-+			return -ENODEV;
-+
-+		bcma_pcie2_3rd_init(bus);
-+		phyaddr = 0xf;
-+	} else {
-+		phyaddr = bdev->core_unit;
-+	}
-+	bcma_pcie2_improve_phy_jitter(bus, phyaddr);
-+
-+	/* create mem resource */
-+	res = devm_kzalloc(&bdev->dev, sizeof(*res), GFP_KERNEL);
-+	if (!res)
-+		return -EINVAL;
-+
-+	res->start = bdev->addr_s[0];
-+	res->end = bdev->addr_s[0] + SZ_128M -1;
-+	res->name = "PCIe dummy IO space";
-+	res->flags = IORESOURCE_MEM;
-+
-+	pci_add_resource(&sys->resources, res);
-+
-+	/* This PCIe controller does not support IO Mem, so use a dummy one. */
-+	res = devm_kzalloc(&bdev->dev, sizeof(*res), GFP_KERNEL);
-+	if (!res)
-+		return -EINVAL;
-+
-+	res->start = 0;
-+	res->end = 0;
-+	res->name = "PCIe dummy IO space";
-+	res->flags = IORESOURCE_IO;
-+
-+	pci_add_resource(&sys->resources, res);
-+
-+	bcma_pcie2_hw_init(bdev);
-+	ret = bcma_pcie2_map_init(bdev, bdev->addr_s[0]);
-+	if (ret)
-+		return ret;
-+
-+	/*
-+	 * Skip inactive ports -
-+	 * will need to change this for hot-plugging
-+	 */
-+	ret = bcma_pcie2_check_link(bdev, sys);
-+	if (ret)
-+		return ret;
-+
-+	ret = bcma_pcie2_bridge_init(bdev, bdev->addr_s[0], SZ_128M);
-+	if (ret)
-+		return ret;
-+
-+	return 1;
-+}
-+
-+static int bcma_pcie2_probe(struct bcma_device *bdev)
-+{
-+	struct hw_pci hw = {
-+		.nr_controllers = 1,
-+		.domain		= bdev->core_unit,
-+		.private_data	= (void **)&bdev,
-+		.setup		= bcma_pcie2_setup,
-+		.map_irq	= bcma_pcie2_map_irq,
-+		.ops		= &bcma_pcie2_ops,
-+	};
-+
-+	dev_info(&bdev->dev, "initializing PCIe controller\n");
-+
-+	/* Announce this port to ARM/PCI common code */
-+	pci_common_init_dev(&bdev->dev, &hw);
-+
-+	/* Setup virtual-wire interrupts */
-+	bcma_write32(bdev, BCMA_CORE_PCIE2_SYS_RC_INTX_EN, 0xf);
-+
-+	/* Enable memory and bus master */
-+	bcma_write32(bdev, SOC_PCIE_HDR_OFF + 4, 0x6);
-+
-+	return 0;
-+}
-+
-+static const struct bcma_device_id bcma_pcie2_table[] = {
-+	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_PCIEG2, BCMA_ANY_REV, BCMA_ANY_CLASS),
-+	BCMA_CORETABLE_END
-+};
-+MODULE_DEVICE_TABLE(bcma, bcma_pcie2_table);
-+
-+static struct bcma_driver bcma_pcie2_driver = {
-+	.name		= KBUILD_MODNAME,
-+	.id_table	= bcma_pcie2_table,
-+	.probe		= bcma_pcie2_probe,
-+};
-+
-+static int __init bcma_pcie2_init(void)
-+{
-+	return bcma_driver_register(&bcma_pcie2_driver);
-+}
-+module_init(bcma_pcie2_init);
-+
-+static void __exit bcma_pcie2_exit(void)
-+{
-+	bcma_driver_unregister(&bcma_pcie2_driver);
-+}
-+module_exit(bcma_pcie2_exit);
-+
-+MODULE_AUTHOR("Hauke Mehrtens");
-+MODULE_DESCRIPTION("BCM5301X PCIe host controller");
-+MODULE_LICENSE("GPLv2");
diff --git a/target/linux/bcm53xx/patches-3.14/180-spi-bcm53xx-driver-for-SPI-controller-on-Broadcom-bc.patch b/target/linux/bcm53xx/patches-3.14/180-spi-bcm53xx-driver-for-SPI-controller-on-Broadcom-bc.patch
deleted file mode 100644
index f79e729..0000000
--- a/target/linux/bcm53xx/patches-3.14/180-spi-bcm53xx-driver-for-SPI-controller-on-Broadcom-bc.patch
+++ /dev/null
@@ -1,435 +0,0 @@
-From a59f3fa1dd4cb284171a53cb7a614ad947c544f6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 13 Aug 2014 14:11:39 +0200
-Subject: [PATCH V2] spi: bcm53xx: driver for SPI controller on Broadcom bcma
- SoC
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom 53xx ARM SoCs use bcma bus that contains various cores (AKA
-devices). If board has a serial flash, it's connected over SPI and the
-bcma bus includes a SPI controller. Example log from such a board:
-bus0: Found chip with id 53010, rev 0x00 and package 0x02
-(...)
-bus0: Core 18 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)
-
-This patch adds a bcma driver for SPI core, it registers SPI master
-controller and "bcm53xxspiflash" SPI device.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-Since RFC: Add Signed-off-by
-	   Update to compile on top of for-next
-V2: Use wait timeout
-    Describe bcm53xxspi_calc_timeout a bit
-    Use devm_spi_register_master
-
-Thanks Mark for your comments!
----
- drivers/spi/Kconfig       |   6 +
- drivers/spi/Makefile      |   1 +
- drivers/spi/spi-bcm53xx.c | 295 ++++++++++++++++++++++++++++++++++++++++++++++
- drivers/spi/spi-bcm53xx.h |  72 +++++++++++
- 4 files changed, 374 insertions(+)
- create mode 100644 drivers/spi/spi-bcm53xx.c
- create mode 100644 drivers/spi/spi-bcm53xx.h
-
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -112,6 +112,12 @@ config SPI_AU1550
- 	  If you say yes to this option, support will be included for the
- 	  PSC SPI controller found on Au1550, Au1200 and Au1300 series.
- 
-+config SPI_BCM53XX
-+	tristate "Broadcom BCM53xx SPI controller"
-+	depends on ARCH_BCM_5301X
-+	help
-+          Enable support for the SPI controller on Broadcom BCM53xx ARM SoCs.
-+
- config SPI_BCM63XX
- 	tristate "Broadcom BCM63xx SPI controller"
- 	depends on BCM63XX
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -15,6 +15,7 @@ obj-$(CONFIG_SPI_ATMEL)			+= spi-atmel.o
- obj-$(CONFIG_SPI_ATH79)			+= spi-ath79.o
- obj-$(CONFIG_SPI_AU1550)		+= spi-au1550.o
- obj-$(CONFIG_SPI_BCM2835)		+= spi-bcm2835.o
-+obj-$(CONFIG_SPI_BCM53XX)		+= spi-bcm53xx.o
- obj-$(CONFIG_SPI_BCM63XX)		+= spi-bcm63xx.o
- obj-$(CONFIG_SPI_BCM63XX_HSSPI)		+= spi-bcm63xx-hsspi.o
- obj-$(CONFIG_SPI_BFIN5XX)		+= spi-bfin5xx.o
---- /dev/null
-+++ b/drivers/spi/spi-bcm53xx.c
-@@ -0,0 +1,295 @@
-+#define pr_fmt(fmt)		KBUILD_MODNAME ": " fmt
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+#include <linux/bcma/bcma.h>
-+#include <linux/spi/spi.h>
-+
-+#include "spi-bcm53xx.h"
-+
-+#define BCM53XXSPI_MAX_SPI_BAUD	13500000	/* 216 MHz? */
-+
-+/* The longest observed required wait was 19 ms */
-+#define BCM53XXSPI_SPE_TIMEOUT_MS	80
-+
-+struct bcm53xxspi {
-+	struct bcma_device *core;
-+	struct spi_master *master;
-+
-+	size_t read_offset;
-+};
-+
-+static inline u32 bcm53xxspi_read(struct bcm53xxspi *b53spi, u16 offset)
-+{
-+	return bcma_read32(b53spi->core, offset);
-+}
-+
-+static inline void bcm53xxspi_write(struct bcm53xxspi *b53spi, u16 offset,
-+				    u32 value)
-+{
-+	bcma_write32(b53spi->core, offset, value);
-+}
-+
-+static inline unsigned int bcm53xxspi_calc_timeout(size_t len)
-+{
-+	/* Do some magic calculation based on length and buad. Add 10% and 1. */
-+	return (len * 9000 / BCM53XXSPI_MAX_SPI_BAUD * 110 / 100) + 1;
-+}
-+
-+static int bcm53xxspi_wait(struct bcm53xxspi *b53spi, unsigned int timeout_ms)
-+{
-+	unsigned long deadline;
-+	u32 tmp;
-+
-+	/* SPE bit has to be 0 before we read MSPI STATUS */
-+	deadline = jiffies + BCM53XXSPI_SPE_TIMEOUT_MS * HZ / 1000;
-+	do {
-+		tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
-+		if (!(tmp & B53SPI_MSPI_SPCR2_SPE))
-+			break;
-+		udelay(5);
-+	} while (!time_after_eq(jiffies, deadline));
-+
-+	if (tmp & B53SPI_MSPI_SPCR2_SPE)
-+		goto spi_timeout;
-+
-+	/* Check status */
-+	deadline = jiffies + timeout_ms * HZ / 1000;
-+	do {
-+		tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_MSPI_STATUS);
-+		if (tmp & B53SPI_MSPI_MSPI_STATUS_SPIF) {
-+			bcm53xxspi_write(b53spi, B53SPI_MSPI_MSPI_STATUS, 0);
-+			return 0;
-+		}
-+
-+		cpu_relax();
-+		udelay(100);
-+	} while (!time_after_eq(jiffies, deadline));
-+
-+spi_timeout:
-+	bcm53xxspi_write(b53spi, B53SPI_MSPI_MSPI_STATUS, 0);
-+
-+	pr_err("Timeout waiting for SPI to be ready!\n");
-+
-+	return -EBUSY;
-+}
-+
-+static void bcm53xxspi_buf_write(struct bcm53xxspi *b53spi, u8 *w_buf,
-+				 size_t len, bool cont)
-+{
-+	u32 tmp;
-+	int i;
-+
-+	for (i = 0; i < len; i++) {
-+		/* Transmit Register File MSB */
-+		bcm53xxspi_write(b53spi, B53SPI_MSPI_TXRAM + 4 * (i * 2),
-+				 (unsigned int)w_buf[i]);
-+	}
-+
-+	for (i = 0; i < len; i++) {
-+		tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL |
-+		      B53SPI_CDRAM_PCS_DSCK;
-+		if (!cont && i == len - 1)
-+			tmp &= ~B53SPI_CDRAM_CONT;
-+		tmp &= ~0x1;
-+		/* Command Register File */
-+		bcm53xxspi_write(b53spi, B53SPI_MSPI_CDRAM + 4 * i, tmp);
-+	}
-+
-+	/* Set queue pointers */
-+	bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0);
-+	bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, len - 1);
-+
-+	if (cont)
-+		bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1);
-+
-+	/* Start SPI transfer */
-+	tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
-+	tmp |= B53SPI_MSPI_SPCR2_SPE;
-+	if (cont)
-+		tmp |= B53SPI_MSPI_SPCR2_CONT_AFTER_CMD;
-+	bcm53xxspi_write(b53spi, B53SPI_MSPI_SPCR2, tmp);
-+
-+	/* Wait for SPI to finish */
-+	bcm53xxspi_wait(b53spi, bcm53xxspi_calc_timeout(len));
-+
-+	if (!cont)
-+		bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
-+
-+	b53spi->read_offset = len;
-+}
-+
-+static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf,
-+				size_t len, bool cont)
-+{
-+	u32 tmp;
-+	int i;
-+
-+	for (i = 0; i < b53spi->read_offset + len; i++) {
-+		tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL |
-+		      B53SPI_CDRAM_PCS_DSCK;
-+		if (!cont && i == b53spi->read_offset + len - 1)
-+			tmp &= ~B53SPI_CDRAM_CONT;
-+		tmp &= ~0x1;
-+		/* Command Register File */
-+		bcm53xxspi_write(b53spi, B53SPI_MSPI_CDRAM + 4 * i, tmp);
-+	}
-+
-+	/* Set queue pointers */
-+	bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0);
-+	bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP,
-+			 b53spi->read_offset + len - 1);
-+
-+	if (cont)
-+		bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1);
-+
-+	/* Start SPI transfer */
-+	tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
-+	tmp |= B53SPI_MSPI_SPCR2_SPE;
-+	if (cont)
-+		tmp |= B53SPI_MSPI_SPCR2_CONT_AFTER_CMD;
-+	bcm53xxspi_write(b53spi, B53SPI_MSPI_SPCR2, tmp);
-+
-+	/* Wait for SPI to finish */
-+	bcm53xxspi_wait(b53spi, bcm53xxspi_calc_timeout(len));
-+
-+	if (!cont)
-+		bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
-+
-+	for (i = 0; i < len; ++i) {
-+		int offset = b53spi->read_offset + i;
-+
-+		/* Data stored in the transmit register file LSB */
-+		r_buf[i] = (u8)bcm53xxspi_read(b53spi, B53SPI_MSPI_RXRAM + 4 * (1 + offset * 2));
-+	}
-+
-+	b53spi->read_offset = 0;
-+}
-+
-+static int bcm53xxspi_transfer_one(struct spi_master *master,
-+				   struct spi_device *spi,
-+				   struct spi_transfer *t)
-+{
-+	struct bcm53xxspi *b53spi = spi_master_get_devdata(master);
-+	u8 *buf;
-+	size_t left;
-+
-+	if (t->tx_buf) {
-+		buf = (u8 *)t->tx_buf;
-+		left = t->len;
-+		while (left) {
-+			size_t to_write = min_t(size_t, 16, left);
-+			bool cont = left - to_write > 0;
-+
-+			bcm53xxspi_buf_write(b53spi, buf, to_write, cont);
-+			left -= to_write;
-+			buf += to_write;
-+		}
-+	}
-+
-+	if (t->rx_buf) {
-+		buf = (u8 *)t->rx_buf;
-+		left = t->len;
-+		while (left) {
-+			size_t to_read = min_t(size_t, 16 - b53spi->read_offset,
-+					       left);
-+			bool cont = left - to_read > 0;
-+
-+			bcm53xxspi_buf_read(b53spi, buf, to_read, cont);
-+			left -= to_read;
-+			buf += to_read;
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+/**************************************************
-+ * BCMA
-+ **************************************************/
-+
-+struct spi_board_info bcm53xx_info = {
-+	.modalias	= "bcm53xxspiflash",
-+};
-+
-+static const struct bcma_device_id bcm53xxspi_bcma_tbl[] = {
-+	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_QSPI, BCMA_ANY_REV, BCMA_ANY_CLASS),
-+	BCMA_CORETABLE_END
-+};
-+MODULE_DEVICE_TABLE(bcma, bcm53xxspi_bcma_tbl);
-+
-+static int bcm53xxspi_bcma_probe(struct bcma_device *core)
-+{
-+	struct bcm53xxspi *b53spi;
-+	struct spi_master *master;
-+	int err;
-+
-+	if (core->bus->drv_cc.core->id.rev != 42) {
-+		pr_err("SPI on SoC with unsupported ChipCommon rev\n");
-+		return -ENOTSUPP;
-+	}
-+
-+	master = spi_alloc_master(&core->dev, sizeof(*b53spi));
-+	if (!master)
-+		return -ENOMEM;
-+
-+	b53spi = spi_master_get_devdata(master);
-+	b53spi->master = master;
-+	b53spi->core = core;
-+
-+	master->transfer_one = bcm53xxspi_transfer_one;
-+
-+	bcma_set_drvdata(core, b53spi);
-+
-+	err = devm_spi_register_master(&core->dev, master);
-+	if (err) {
-+		spi_master_put(master);
-+		bcma_set_drvdata(core, NULL);
-+		goto out;
-+	}
-+
-+	/* Broadcom SoCs (at least with the CC rev 42) use SPI for flash only */
-+	spi_new_device(master, &bcm53xx_info);
-+
-+out:
-+	return err;
-+}
-+
-+static void bcm53xxspi_bcma_remove(struct bcma_device *core)
-+{
-+	struct bcm53xxspi *b53spi = bcma_get_drvdata(core);
-+
-+	spi_unregister_master(b53spi->master);
-+}
-+
-+static struct bcma_driver bcm53xxspi_bcma_driver = {
-+	.name		= KBUILD_MODNAME,
-+	.id_table	= bcm53xxspi_bcma_tbl,
-+	.probe		= bcm53xxspi_bcma_probe,
-+	.remove		= bcm53xxspi_bcma_remove,
-+};
-+
-+/**************************************************
-+ * Init & exit
-+ **************************************************/
-+
-+static int __init bcm53xxspi_module_init(void)
-+{
-+	int err = 0;
-+
-+	err = bcma_driver_register(&bcm53xxspi_bcma_driver);
-+	if (err)
-+		pr_err("Failed to register bcma driver: %d\n", err);
-+
-+	return err;
-+}
-+
-+static void __exit bcm53xxspi_module_exit(void)
-+{
-+	bcma_driver_unregister(&bcm53xxspi_bcma_driver);
-+}
-+
-+module_init(bcm53xxspi_module_init);
-+module_exit(bcm53xxspi_module_exit);
---- /dev/null
-+++ b/drivers/spi/spi-bcm53xx.h
-@@ -0,0 +1,72 @@
-+#ifndef SPI_BCM53XX_H
-+#define SPI_BCM53XX_H
-+
-+#define B53SPI_BSPI_REVISION_ID			0x000
-+#define B53SPI_BSPI_SCRATCH			0x004
-+#define B53SPI_BSPI_MAST_N_BOOT_CTRL		0x008
-+#define B53SPI_BSPI_BUSY_STATUS			0x00c
-+#define B53SPI_BSPI_INTR_STATUS			0x010
-+#define B53SPI_BSPI_B0_STATUS			0x014
-+#define B53SPI_BSPI_B0_CTRL			0x018
-+#define B53SPI_BSPI_B1_STATUS			0x01c
-+#define B53SPI_BSPI_B1_CTRL			0x020
-+#define B53SPI_BSPI_STRAP_OVERRIDE_CTRL		0x024
-+#define B53SPI_BSPI_FLEX_MODE_ENABLE		0x028
-+#define B53SPI_BSPI_BITS_PER_CYCLE		0x02c
-+#define B53SPI_BSPI_BITS_PER_PHASE		0x030
-+#define B53SPI_BSPI_CMD_AND_MODE_BYTE		0x034
-+#define B53SPI_BSPI_BSPI_FLASH_UPPER_ADDR_BYTE	0x038
-+#define B53SPI_BSPI_BSPI_XOR_VALUE		0x03c
-+#define B53SPI_BSPI_BSPI_XOR_ENABLE		0x040
-+#define B53SPI_BSPI_BSPI_PIO_MODE_ENABLE	0x044
-+#define B53SPI_BSPI_BSPI_PIO_IODIR		0x048
-+#define B53SPI_BSPI_BSPI_PIO_DATA		0x04c
-+
-+/* RAF */
-+#define B53SPI_RAF_START_ADDR			0x100
-+#define B53SPI_RAF_NUM_WORDS			0x104
-+#define B53SPI_RAF_CTRL				0x108
-+#define B53SPI_RAF_FULLNESS			0x10c
-+#define B53SPI_RAF_WATERMARK			0x110
-+#define B53SPI_RAF_STATUS			0x114
-+#define B53SPI_RAF_READ_DATA			0x118
-+#define B53SPI_RAF_WORD_CNT			0x11c
-+#define B53SPI_RAF_CURR_ADDR			0x120
-+
-+/* MSPI */
-+#define B53SPI_MSPI_SPCR0_LSB			0x200
-+#define B53SPI_MSPI_SPCR0_MSB			0x204
-+#define B53SPI_MSPI_SPCR1_LSB			0x208
-+#define B53SPI_MSPI_SPCR1_MSB			0x20c
-+#define B53SPI_MSPI_NEWQP			0x210
-+#define B53SPI_MSPI_ENDQP			0x214
-+#define B53SPI_MSPI_SPCR2			0x218
-+#define  B53SPI_MSPI_SPCR2_SPE			0x00000040
-+#define  B53SPI_MSPI_SPCR2_CONT_AFTER_CMD	0x00000080
-+#define B53SPI_MSPI_MSPI_STATUS			0x220
-+#define  B53SPI_MSPI_MSPI_STATUS_SPIF		0x00000001
-+#define B53SPI_MSPI_CPTQP			0x224
-+#define B53SPI_MSPI_TXRAM			0x240 /* 32 registers, up to 0x2b8 */
-+#define B53SPI_MSPI_RXRAM			0x2c0 /* 32 registers, up to 0x33c */
-+#define B53SPI_MSPI_CDRAM			0x340 /* 16 registers, up to 0x37c */
-+#define  B53SPI_CDRAM_PCS_PCS0			0x00000001
-+#define  B53SPI_CDRAM_PCS_PCS1			0x00000002
-+#define  B53SPI_CDRAM_PCS_PCS2			0x00000004
-+#define  B53SPI_CDRAM_PCS_PCS3			0x00000008
-+#define  B53SPI_CDRAM_PCS_DISABLE_ALL		0x0000000f
-+#define  B53SPI_CDRAM_PCS_DSCK			0x00000010
-+#define  B53SPI_CDRAM_BITSE			0x00000040
-+#define  B53SPI_CDRAM_CONT			0x00000080
-+#define B53SPI_MSPI_WRITE_LOCK			0x380
-+#define B53SPI_MSPI_DISABLE_FLUSH_GEN		0x384
-+
-+/* Interrupt */
-+#define B53SPI_INTR_RAF_LR_FULLNESS_REACHED	0x3a0
-+#define B53SPI_INTR_RAF_LR_TRUNCATED		0x3a4
-+#define B53SPI_INTR_RAF_LR_IMPATIENT		0x3a8
-+#define B53SPI_INTR_RAF_LR_SESSION_DONE		0x3ac
-+#define B53SPI_INTR_RAF_LR_OVERREAD		0x3b0
-+#define B53SPI_INTR_MSPI_DONE			0x3b4
-+#define B53SPI_INTR_MSPI_HALT_SET_TRANSACTION_DONE	0x3b8
-+
-+#endif /* SPI_BCM53XX_H */
diff --git a/target/linux/bcm53xx/patches-3.14/300-ARM-BCM5301X-Disable-MMU-and-Dcache-for-decompression.patch b/target/linux/bcm53xx/patches-3.14/300-ARM-BCM5301X-Disable-MMU-and-Dcache-for-decompression.patch
deleted file mode 100644
index 8877096..0000000
--- a/target/linux/bcm53xx/patches-3.14/300-ARM-BCM5301X-Disable-MMU-and-Dcache-for-decompression.patch
+++ /dev/null
@@ -1,195 +0,0 @@
-From 26023cdfacaf116545b1087b9d1fe50dc6fbda10 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 24 Sep 2014 22:14:07 +0200
-Subject: [PATCH] ARM: BCM5301X: Disable MMU and Dcache for decompression
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Without this fix kernel was randomly hanging in ~25% of tries during
-early init. Hangs used to happen at random places in the start_kernel.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- arch/arm/boot/compressed/Makefile                |   5 +
- arch/arm/boot/compressed/head-bcm_5301x-mpcore.S |  37 +++++++
- arch/arm/boot/compressed/mpcore_cache.S          | 118 +++++++++++++++++++++++
- 3 files changed, 160 insertions(+)
- create mode 100644 arch/arm/boot/compressed/head-bcm_5301x-mpcore.S
- create mode 100644 arch/arm/boot/compressed/mpcore_cache.S
-
---- a/arch/arm/boot/compressed/Makefile
-+++ b/arch/arm/boot/compressed/Makefile
-@@ -44,6 +44,11 @@ ifeq ($(CONFIG_ARCH_ACORN),y)
- OBJS		+= ll_char_wr.o font.o
- endif
- 
-+ifeq ($(CONFIG_ARCH_BCM_5301X),y)
-+OBJS		+= head-bcm_5301x-mpcore.o
-+OBJS		+= mpcore_cache.o
-+endif
-+
- ifeq ($(CONFIG_ARCH_SA1100),y)
- OBJS		+= head-sa1100.o
- endif
---- /dev/null
-+++ b/arch/arm/boot/compressed/head-bcm_5301x-mpcore.S
-@@ -0,0 +1,37 @@
-+/*
-+ *
-+ * Platform specific tweaks.  This is merged into head.S by the linker.
-+ *
-+ */
-+
-+#include <linux/linkage.h>
-+#include <asm/assembler.h>
-+#include <asm/cp15.h>
-+
-+		.section        ".start", "ax"
-+
-+/*
-+ * This code section is spliced into the head code by the linker
-+ */
-+
-+__plat_uncompress_start:
-+
-+	@ Preserve r8/r7 i.e. kernel entry values
-+	mov	r12, r8
-+
-+	@ Clear MMU enable and Dcache enable bits
-+	mrc	p15, 0, r0, c1, c0, 0		@ Read SCTLR
-+	bic	r0, #CR_C|CR_M
-+	mcr	p15, 0, r0, c1, c0, 0		@ Write SCTLR
-+	nop
-+
-+	@ Call the cache invalidation routine
-+	bl	v7_all_dcache_invalidate
-+	nop
-+	mov	r0,#0
-+	ldr	r3, =0x19022000			@ L2 cache controller, control reg
-+	str	r0, [r3, #0x100]		@ Disable L2 cache
-+	nop
-+
-+	@ Restore
-+	mov	r8, r12
---- /dev/null
-+++ b/arch/arm/boot/compressed/mpcore_cache.S
-@@ -0,0 +1,118 @@
-+/*****************************************************************************
-+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
-+*
-+* Unless you and Broadcom execute a separate written software license
-+* agreement governing use of this software, this software is licensed to you
-+* under the terms of the GNU General Public License version 2, available at
-+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-+*
-+* Notwithstanding the above, under no circumstances may you combine this
-+* software in any way with any other Broadcom software provided under a
-+* license other than the GPL, without Broadcom's express prior written
-+* consent.
-+*****************************************************************************/
-+
-+#include <linux/linkage.h>
-+#include <linux/init.h>
-+
-+	__INIT
-+
-+/*
-+ * v7_l1_cache_invalidate
-+ *
-+ * Invalidate contents of L1 cache without flushing its contents
-+ * into outer cache and memory. This is needed when the contents
-+ * of the cache are unpredictable after power-up.
-+ *
-+ * corrupts r0-r6
-+ */
-+
-+ENTRY(v7_l1_cache_invalidate)
-+	mov	r0, #0
-+	mcr	p15, 2, r0, c0, c0, 0	@ set cache level to 1
-+	mrc	p15, 1, r0, c0, c0, 0	@ read CLIDR
-+
-+	ldr	r1, =0x7fff
-+	and	r2, r1, r0, lsr #13	@ get max # of index size
-+
-+	ldr	r1, =0x3ff
-+	and	r3, r1, r0, lsr #3	@ NumWays - 1
-+	add	r2, r2, #1		@ NumSets
-+
-+	and	r0, r0, #0x7
-+	add	r0, r0, #4		@ SetShift
-+
-+	clz	r1, r3			@ WayShift
-+	add	r4, r3, #1		@ NumWays
-+1:	sub	r2, r2, #1		@ NumSets--
-+	mov	r3, r4			@ Temp = NumWays
-+2:	subs	r3, r3, #1		@ Temp--
-+	mov	r5, r3, lsl r1
-+	mov	r6, r2, lsl r0
-+	orr	r5, r5, r6		@ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
-+	mcr	p15, 0, r5, c7, c6, 2	@ Invalidate line
-+	bgt	2b
-+	cmp	r2, #0
-+	bgt	1b
-+	dsb
-+	mov	r0,#0
-+	mcr	p15,0,r0,c7,c5,0	/* Invalidate icache */
-+	isb
-+	mov	pc, lr
-+ENDPROC(v7_l1_cache_invalidate)
-+
-+/*
-+ * v7_all_dcache_invalidate
-+ *
-+ * Invalidate without flushing the contents of all cache levels
-+ * accesible by the current processor core.
-+ * This is useful when the contents of cache memory are undetermined
-+ * at power-up.
-+ *	Corrupted registers: r0-r7, r9-r11
-+ *
-+ * Based on cache-v7.S: v7_flush_dcache_all()
-+ */
-+
-+ENTRY(v7_all_dcache_invalidate)
-+	mrc	p15, 1, r0, c0, c0, 1	@ read clidr
-+	ands	r3, r0, #0x7000000	@ extract loc from clidr
-+	mov	r3, r3, lsr #23		@ left align loc bit field
-+	beq	finished		@ if loc is 0, then no need to clean
-+	mov	r10, #0			@ start clean at cache level 0
-+loop1:
-+	add	r2, r10, r10, lsr #1	@ work out 3x current cache level
-+	mov	r1, r0, lsr r2		@ extract cache type bits from clidr
-+	and	r1, r1, #7		@ mask of bits for current cache only
-+	cmp	r1, #2			@ see what cache we have at this level
-+	blt	skip			@ skip if no cache, or just i-cache
-+	mcr	p15, 2, r10, c0, c0, 0	@ select current cache level in cssr
-+	isb				@ isb to sych the new cssr&csidr
-+	mrc	p15, 1, r1, c0, c0, 0	@ read the new csidr
-+	and	r2, r1, #7		@ extract the length of the cache lines
-+	add	r2, r2, #4		@ add 4 (line length offset)
-+	ldr	r4, =0x3ff
-+	ands	r4, r4, r1, lsr #3	@ find maximum number on the way size
-+	clz	r5, r4			@ find bit pos of way size increment
-+	ldr	r7, =0x7fff
-+	ands	r7, r7, r1, lsr #13	@ extract max number of the index size
-+loop2:
-+	mov	r9, r4			@ create working copy of max way size
-+loop3:
-+	orr	r11, r10, r9, lsl r5	@ factor way and cache number into r11
-+	orr	r11, r11, r7, lsl r2	@ factor index number into r11
-+	mcr	p15, 0, r11, c7, c6, 2	@ Invalidate line
-+	subs	r9, r9, #1		@ decrement the way
-+	bge	loop3
-+	subs	r7, r7, #1		@ decrement the index
-+	bge	loop2
-+skip:
-+	add	r10, r10, #2		@ increment cache number
-+	cmp	r3, r10
-+	bgt	loop1
-+finished:
-+	mov	r10, #0			@ swith back to cache level 0
-+	mcr	p15, 2, r10, c0, c0, 0	@ select current cache level in cssr
-+	dsb
-+	isb
-+	mov	pc, lr
-+ENDPROC(v7_all_dcache_invalidate)
diff --git a/target/linux/bcm53xx/patches-3.14/302-ARM-BCM5301X-select-GPIOLIB-as-optional.patch b/target/linux/bcm53xx/patches-3.14/302-ARM-BCM5301X-select-GPIOLIB-as-optional.patch
deleted file mode 100644
index 887650e..0000000
--- a/target/linux/bcm53xx/patches-3.14/302-ARM-BCM5301X-select-GPIOLIB-as-optional.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From e7b1065712e769eb4de7b9d4aa222a4531c2b8fd Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sat, 20 Sep 2014 18:21:19 +0200
-Subject: [PATCH V2] ARM: BCM5301X: select GPIOLIB as optional
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-All routers (or 99% of them) based on BCM5301X use GPIOs to control LEDs
-and buttons.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-V2: Don't select GPIOLIB. We may still think about making it default at
-    some point, but we dont' really require it to boot successfully.
----
- arch/arm/mach-bcm/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/mach-bcm/Kconfig
-+++ b/arch/arm/mach-bcm/Kconfig
-@@ -35,6 +35,7 @@ config ARCH_BCM_MOBILE
- config ARCH_BCM_5301X
- 	bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
- 	depends on MMU
-+	select ARCH_WANT_OPTIONAL_GPIOLIB
- 	select ARM_GIC
- 	select CACHE_L2X0
- 	select HAVE_ARM_SCU if SMP
diff --git a/target/linux/bcm53xx/patches-3.14/303-ARM-BCM5310X-Enable-earlyprintk-on-tested-devices.patch b/target/linux/bcm53xx/patches-3.14/303-ARM-BCM5310X-Enable-earlyprintk-on-tested-devices.patch
deleted file mode 100644
index 51ea2be..0000000
--- a/target/linux/bcm53xx/patches-3.14/303-ARM-BCM5310X-Enable-earlyprintk-on-tested-devices.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From eb1075cc48d3c315c7403822c33da9588ab76492 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 14 Jan 2015 08:33:25 +0100
-Subject: [PATCH] ARM: BCM5310X: Enable earlyprintk on tested devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts  | 2 +-
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts        | 2 +-
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts        | 2 +-
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 2 +-
- 4 files changed, 4 insertions(+), 4 deletions(-)
-
-diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-index 5fc0fae..fcb17c6 100644
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -16,7 +16,7 @@
- 	model = "Buffalo WZR-1750DHP (BCM4708)";
- 
- 	chosen {
--		bootargs = "console=ttyS0,115200";
-+		bootargs = "console=ttyS0,115200 earlyprintk";
- 	};
- 
- 	memory {
-diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-index 4ed7de1..05e80b1 100644
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -16,7 +16,7 @@
- 	model = "Netgear R6250 V1 (BCM4708)";
- 
- 	chosen {
--		bootargs = "console=ttyS0,115200";
-+		bootargs = "console=ttyS0,115200 earlyprintk";
- 	};
- 
- 	memory {
-diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-index fb76378..5dc50e1 100644
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -16,7 +16,7 @@
- 	model = "Asus RT-N18U (BCM47081)";
- 
- 	chosen {
--		bootargs = "console=ttyS0,115200";
-+		bootargs = "console=ttyS0,115200 earlyprintk";
- 	};
- 
- 	memory {
-diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-index bbb414f..20903a5 100644
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -16,7 +16,7 @@
- 	model = "Buffalo WZR-600DHP2 (BCM47081)";
- 
- 	chosen {
--		bootargs = "console=ttyS0,115200";
-+		bootargs = "console=ttyS0,115200 earlyprintk";
- 	};
- 
- 	memory {
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -16,7 +16,7 @@
- 	model = "Buffalo WZR-900DHP (BCM47081)";
- 
- 	chosen {
--		bootargs = "console=ttyS0,115200";
-+		bootargs = "console=ttyS0,115200 earlyprintk";
- 	};
- 
- 	memory {
--- 
-1.8.4.5
-
diff --git a/target/linux/bcm53xx/patches-3.14/306-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch b/target/linux/bcm53xx/patches-3.14/306-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch
deleted file mode 100644
index 183b53f..0000000
--- a/target/linux/bcm53xx/patches-3.14/306-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From 36b2fbb3badf0e32b371e1f7579a95d4fe25c0e1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 14 Jan 2015 09:13:58 +0100
-Subject: [PATCH] ARM: BCM5301X: Specify RAM on devices by including HIGHMEM
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts  | 3 ++-
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts        | 3 ++-
- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts     | 3 ++-
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts        | 3 ++-
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 3 ++-
- 5 files changed, 10 insertions(+), 5 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -20,7 +20,8 @@
- 	};
- 
- 	memory {
--		reg = <0x00000000 0x08000000>;
-+		reg = <0x00000000 0x08000000
-+		       0x88000000 0x18000000>;
- 	};
- 
- 	spi {
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -20,7 +20,8 @@
- 	};
- 
- 	memory {
--		reg = <0x00000000 0x08000000>;
-+		reg = <0x00000000 0x08000000
-+		       0x88000000 0x08000000>;
- 	};
- 
- 	chipcommonA {
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -20,7 +20,8 @@
- 	};
- 
- 	memory {
--		reg = <0x00000000 0x08000000>;
-+		reg = <0x00000000 0x08000000
-+		       0x88000000 0x08000000>;
- 	};
- 
- 	leds {
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -20,7 +20,8 @@
- 	};
- 
- 	memory {
--		reg = <0x00000000 0x08000000>;
-+		reg = <0x00000000 0x08000000
-+		       0x88000000 0x08000000>;
- 	};
- 
- 	leds {
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -20,7 +20,8 @@
- 	};
- 
- 	memory {
--		reg = <0x00000000 0x08000000>;
-+		reg = <0x00000000 0x08000000
-+		       0x88000000 0x08000000>;
- 	};
- 
- 	spi {
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -20,7 +20,8 @@
- 	};
- 
- 	memory {
--		reg = <0x00000000 0x08000000>;
-+		reg = <0x00000000 0x08000000
-+		       0x88000000 0x08000000>;
- 	};
- 
- 	gpio-keys {
diff --git a/target/linux/bcm53xx/patches-3.14/322-ARM-BCM5301X-Add-DT-for-Asus-RT-AC87U.patch b/target/linux/bcm53xx/patches-3.14/322-ARM-BCM5301X-Add-DT-for-Asus-RT-AC87U.patch
deleted file mode 100644
index 54dd0d1..0000000
--- a/target/linux/bcm53xx/patches-3.14/322-ARM-BCM5301X-Add-DT-for-Asus-RT-AC87U.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 0cc8daf2488539f734150e64c799e3a4dd014cd8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Mon, 19 Jan 2015 11:34:45 +0100
-Subject: [PATCH] ARM: BCM5301X: Add DT for Asus RT-AC87U
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- arch/arm/boot/dts/Makefile                  |  3 +-
- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 44 +++++++++++++++++++++++++++++
- 2 files changed, 46 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -0,0 +1,44 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Asus RT-AC87U
-+ *
-+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+
-+/ {
-+	compatible = "asus,rt-ac87u", "brcm,bcm4709", "brcm,bcm4708";
-+	model = "Asus RT-AC87U (BCM4709)";
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200 earlyprintk";
-+	};
-+
-+	memory {
-+		reg = <0x00000000 0x08000000
-+		       0x88000000 0x08000000>;
-+	};
-+
-+	gpio-keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		wps {
-+			label = "WPS";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		restart {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -57,7 +57,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm4708-netgear-r6300-v2.dtb \
- 	bcm47081-asus-rt-n18u.dtb \
- 	bcm47081-buffalo-wzr-600dhp2.dtb \
--	bcm47081-buffalo-wzr-900dhp.dtb
-+	bcm47081-buffalo-wzr-900dhp.dtb \
-+	bcm4709-asus-rt-ac87u.dtb
- dtb-$(CONFIG_ARCH_BERLIN) += \
- 	berlin2-sony-nsz-gs7.dtb	\
- 	berlin2cd-google-chromecast.dtb
diff --git a/target/linux/bcm53xx/patches-3.14/323-ARM-BCM5301X-Add-DT-for-Netgear-R8000.patch b/target/linux/bcm53xx/patches-3.14/323-ARM-BCM5301X-Add-DT-for-Netgear-R8000.patch
deleted file mode 100644
index 72f83af..0000000
--- a/target/linux/bcm53xx/patches-3.14/323-ARM-BCM5301X-Add-DT-for-Netgear-R8000.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From f3389cf7bc90d5702adcd4c100b49baf7a813bb9 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 28 Jan 2015 22:39:39 +0100
-Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R8000
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- arch/arm/boot/dts/Makefile                  |  3 ++-
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 26 ++++++++++++++++++++++++++
- 2 files changed, 28 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 25445c2..e93e9e4 100644
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -58,7 +58,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm47081-asus-rt-n18u.dtb \
- 	bcm47081-buffalo-wzr-600dhp2.dtb \
- 	bcm47081-buffalo-wzr-900dhp.dtb \
--	bcm4709-asus-rt-ac87u.dtb
-+	bcm4709-asus-rt-ac87u.dtb \
-+	bcm4709-netgear-r8000.dtb
- dtb-$(CONFIG_ARCH_BERLIN) += \
- 	berlin2-sony-nsz-gs7.dtb	\
- 	berlin2cd-google-chromecast.dtb
-diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-new file mode 100644
-index 0000000..2d7e388
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -0,0 +1,26 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Netgear R8000
-+ *
-+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+
-+/ {
-+	compatible = "netgear,r8000", "brcm,bcm4709", "brcm,bcm4708";
-+	model = "Netgear R8000 (BCM4709)";
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200 earlyprintk";
-+	};
-+
-+	memory {
-+		reg = <0x00000000 0x08000000
-+		       0x88000000 0x08000000>;
-+	};
-+};
---- a/arch/arm/mach-bcm/bcm_5301x.c
-+++ b/arch/arm/mach-bcm/bcm_5301x.c
-@@ -35,15 +35,16 @@ static struct bcma_bus *bcm5301x_get_bcm
- static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr,
- 				 struct pt_regs *regs)
- {
--	if (fsr == 0x1c06 && first_fault) {
-+	if ((fsr == 0x1406 || fsr == 0x1c06) && first_fault) {
- 		first_fault = false;
- 
- 		/*
--		 * These faults with code 0x1c06 happens for no good reason,
--		 * possibly left over from the CFE boot loader.
-+		 * These faults with codes 0x1406 (BCM4709) or 0x1c06 happens
-+		 * for no good reason, possibly left over from the CFE boot
-+		 * loader.
- 		 */
- 		pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
--		addr, fsr);
-+			addr, fsr);
- 
- 		/* Returning non-zero causes fault display and panic */
- 		return 0;
--- 
-1.8.4.5
-
diff --git a/target/linux/bcm53xx/patches-3.14/351-ARM-BCM5301X-Enable-ChipCommon-UART-serial-console.patch b/target/linux/bcm53xx/patches-3.14/351-ARM-BCM5301X-Enable-ChipCommon-UART-serial-console.patch
deleted file mode 100644
index fe7e0a1..0000000
--- a/target/linux/bcm53xx/patches-3.14/351-ARM-BCM5301X-Enable-ChipCommon-UART-serial-console.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From 6c223da976a9225ba9fae8d6f891a8fffaae6092 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Fri, 5 Dec 2014 17:38:40 +0100
-Subject: [PATCH] ARM: BCM5301X: Enable ChipCommon UART (serial console)
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts  | 10 ++++++++++
- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts     | 10 ++++++++++
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts        | 10 ++++++++++
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 10 ++++++++++
- 4 files changed, 40 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -91,6 +91,16 @@
- 		};
- 	};
- 
-+	chipcommonA {
-+		uart0: serial@0300 {
-+			status = "okay";
-+		};
-+
-+		uart1: serial@0400 {
-+			status = "okay";
-+		};
-+	};
-+
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 		#address-cells = <1>;
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -24,6 +24,16 @@
- 		       0x88000000 0x08000000>;
- 	};
- 
-+	chipcommonA {
-+		uart0: serial@0300 {
-+			status = "okay";
-+		};
-+
-+		uart1: serial@0400 {
-+			status = "okay";
-+		};
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -24,6 +24,16 @@
- 		       0x88000000 0x08000000>;
- 	};
- 
-+	chipcommonA {
-+		uart0: serial@0300 {
-+			status = "okay";
-+		};
-+
-+		uart1: serial@0400 {
-+			status = "okay";
-+		};
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -24,6 +24,16 @@
- 		       0x88000000 0x08000000>;
- 	};
- 
-+	chipcommonA {
-+		uart0: serial@0300 {
-+			status = "okay";
-+		};
-+
-+		uart1: serial@0400 {
-+			status = "okay";
-+		};
-+	};
-+
- 	spi {
- 		compatible = "spi-gpio";
- 		num-chipselects = <1>;
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -23,6 +23,16 @@
- 		reg = <0x00000000 0x08000000>;
- 	};
- 
-+	chipcommonA {
-+		uart0: serial@0300 {
-+			status = "okay";
-+		};
-+
-+		uart1: serial@0400 {
-+			status = "okay";
-+		};
-+	};
-+
- 	axi@18000000 {
- 		nand@28000 {
- 			reg = <0x00028000 0x1000>;
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -24,6 +24,16 @@
- 		       0x88000000 0x08000000>;
- 	};
- 
-+	chipcommonA {
-+		uart0: serial@0300 {
-+			status = "okay";
-+		};
-+
-+		uart1: serial@0400 {
-+			status = "okay";
-+		};
-+	};
-+
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 		#address-cells = <1>;
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -23,4 +23,16 @@
- 		reg = <0x00000000 0x08000000
- 		       0x88000000 0x08000000>;
- 	};
-+
-+	chipcommonA {
-+		uart0: serial@0300 {
-+			status = "okay";
-+			clock-frequency = <125000000>;
-+		};
-+
-+		uart1: serial@0400 {
-+			status = "okay";
-+			clock-frequency = <125000000>;
-+		};
-+	};
- };
diff --git a/target/linux/bcm53xx/patches-3.14/400-mtd-bcm47xxpart-scan-whole-flash-on-ARCH_BCM_5301X.patch b/target/linux/bcm53xx/patches-3.14/400-mtd-bcm47xxpart-scan-whole-flash-on-ARCH_BCM_5301X.patch
deleted file mode 100644
index d58d99c..0000000
--- a/target/linux/bcm53xx/patches-3.14/400-mtd-bcm47xxpart-scan-whole-flash-on-ARCH_BCM_5301X.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From d658c21d6697293a928434fd6ac19264b5a8948d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Fri, 30 Jan 2015 08:25:54 +0100
-Subject: [PATCH] mtd: bcm47xxpart: scan whole flash on ARCH_BCM_5301X
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/mtd/bcm47xxpart.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
-diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c
-index ee3e010..f13c824 100644
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -120,9 +120,15 @@ static int bcm47xxpart_parse(struct mtd_info *master,
- 	/* Parse block by block looking for magics */
- 	for (offset = 0; offset <= master->size - blocksize;
- 	     offset += blocksize) {
-+#ifndef CONFIG_ARCH_BCM_5301X
-+		/*
-+		 * ARM routers may have partitions in higher memory. E.g.
-+		 * Netgear R8000 has board_data at 0x2600000.
-+		 */
- 		/* Nothing more in higher memory */
- 		if (offset >= 0x2000000)
- 			break;
-+#endif
- 
- 		if (curr_part >= BCM47XXPART_MAX_PARTS) {
- 			pr_warn("Reached maximum number of partitions, scanning stopped!\n");
--- 
-1.8.4.5
-
diff --git a/target/linux/bcm53xx/patches-3.14/404-mtd-bcm53xxspiflash-new-driver-for-SPI-flahes-on-Bro.patch b/target/linux/bcm53xx/patches-3.14/404-mtd-bcm53xxspiflash-new-driver-for-SPI-flahes-on-Bro.patch
deleted file mode 100644
index 41ef3b3..0000000
--- a/target/linux/bcm53xx/patches-3.14/404-mtd-bcm53xxspiflash-new-driver-for-SPI-flahes-on-Bro.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/drivers/mtd/spi-nor/Kconfig
-+++ b/drivers/mtd/spi-nor/Kconfig
-@@ -28,4 +28,10 @@ config SPI_FSL_QUADSPI
- 	  This enables support for the Quad SPI controller in master mode.
- 	  We only connect the NOR to this controller now.
- 
-+config MTD_SPI_BCM53XXSPIFLASH
-+	tristate "SPI-NOR flashes connected to the Broadcom ARM SoC"
-+	depends on MTD_SPI_NOR
-+	help
-+	  SPI driver for flashes used on Broadcom ARM SoCs.
-+
- endif # MTD_SPI_NOR
---- a/drivers/mtd/spi-nor/Makefile
-+++ b/drivers/mtd/spi-nor/Makefile
-@@ -1,2 +1,3 @@
- obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor.o
- obj-$(CONFIG_SPI_FSL_QUADSPI)	+= fsl-quadspi.o
-+obj-$(CONFIG_MTD_SPI_BCM53XXSPIFLASH)	+= bcm53xxspiflash.o
diff --git a/target/linux/bcm53xx/patches-3.14/420-mtd-bcm5301x_nand.patch b/target/linux/bcm53xx/patches-3.14/420-mtd-bcm5301x_nand.patch
deleted file mode 100644
index 19c8116..0000000
--- a/target/linux/bcm53xx/patches-3.14/420-mtd-bcm5301x_nand.patch
+++ /dev/null
@@ -1,1608 +0,0 @@
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -510,4 +510,10 @@ config MTD_NAND_XWAY
- 	  Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
- 	  to the External Bus Unit (EBU).
- 
-+config MTD_NAND_BCM
-+	tristate "Support for NAND on some Broadcom SoC"
-+	help
-+	  This driver is currently used for the NAND flash controller on the
-+	  Broadcom BCM5301X (NorthStar) SoCs.
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -49,5 +49,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740)		+= jz4740
- obj-$(CONFIG_MTD_NAND_GPMI_NAND)	+= gpmi-nand/
- obj-$(CONFIG_MTD_NAND_XWAY)		+= xway_nand.o
- obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH)	+= bcm47xxnflash/
-+obj-$(CONFIG_MTD_NAND_BCM)		+= bcm_nand.o
- 
- nand-objs := nand_base.o nand_bbt.o
---- /dev/null
-+++ b/drivers/mtd/nand/bcm_nand.c
-@@ -0,0 +1,1583 @@
-+/*
-+ * Nortstar NAND controller driver
-+ *
-+ * (c) Broadcom, Inc. 2012 All Rights Reserved.
-+ * Copyright 2014 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ *
-+ * This module interfaces the NAND controller and hardware ECC capabilities
-+ * tp the generic NAND chip support in the NAND library.
-+ *
-+ * Notes:
-+ *	This driver depends on generic NAND driver, but works at the
-+ *	page level for operations.
-+ *
-+ *	When a page is written, the ECC calculated also protects the OOB
-+ *	bytes not taken by ECC, and so the OOB must be combined with any
-+ *	OOB data that preceded the page-write operation in order for the
-+ *	ECC to be calculated correctly.
-+ *	Also, when the page is erased, but OOB data is not, HW ECC will
-+ *	indicate an error, because it checks OOB too, which calls for some
-+ *	help from the software in this driver.
-+ *
-+ * TBD:
-+ *	Block locking/unlocking support, OTP support
-+ */
-+
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/io.h>
-+#include <linux/ioport.h>
-+#include <linux/interrupt.h>
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/slab.h>
-+#include <linux/bcma/bcma.h>
-+#include <linux/of_irq.h>
-+
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/mtd/partitions.h>
-+
-+#define NANDC_MAX_CHIPS		2	/* Only 2 CSn supported in NorthStar */
-+
-+/*
-+ * Driver private control structure
-+ */
-+struct bcmnand_ctrl {
-+	struct mtd_info		mtd;
-+	struct nand_chip	nand;
-+	struct bcma_device	*core;
-+
-+	struct completion	op_completion;
-+
-+	struct nand_ecclayout	ecclayout;
-+	int			cmd_ret;	/* saved error code */
-+	unsigned char		oob_index;
-+	unsigned char		id_byte_index;
-+	unsigned char		chip_num;
-+	unsigned char		last_cmd;
-+	unsigned char		ecc_level;
-+	unsigned char		sector_size_shift;
-+	unsigned char		sec_per_page_shift;
-+};
-+
-+
-+/*
-+ * IRQ numbers - offset from first irq in nandc_irq resource
-+ */
-+#define NANDC_IRQ_RD_MISS		0
-+#define NANDC_IRQ_ERASE_COMPLETE	1
-+#define NANDC_IRQ_COPYBACK_COMPLETE	2
-+#define NANDC_IRQ_PROGRAM_COMPLETE	3
-+#define NANDC_IRQ_CONTROLLER_RDY	4
-+#define NANDC_IRQ_RDBSY_RDY		5
-+#define NANDC_IRQ_ECC_UNCORRECTABLE	6
-+#define NANDC_IRQ_ECC_CORRECTABLE	7
-+#define NANDC_IRQ_NUM			8
-+
-+struct bcmnand_reg_field {
-+	unsigned int reg;
-+	unsigned int pos;
-+	unsigned int width;
-+};
-+
-+/*
-+ * REGISTERS
-+ *
-+ * Individual bit-fields aof registers are specificed here
-+ * for clarity, and the rest of the code will access each field
-+ * as if it was its own register.
-+ *
-+ * Following registers are off <reg_base>:
-+ */
-+#define REG_BIT_FIELD(r, p, w)	((struct bcmnand_reg_field){(r), (p), (w)})
-+
-+#define NANDC_8KB_PAGE_SUPPORT		REG_BIT_FIELD(0x0, 31, 1)
-+#define NANDC_REV_MAJOR			REG_BIT_FIELD(0x0, 8, 8)
-+#define NANDC_REV_MINOR			REG_BIT_FIELD(0x0, 0, 8)
-+
-+#define NANDC_CMD_START_OPCODE		REG_BIT_FIELD(0x4, 24, 5)
-+
-+#define NANDC_CMD_CS_SEL		REG_BIT_FIELD(0x8, 16, 3)
-+#define NANDC_CMD_EXT_ADDR		REG_BIT_FIELD(0x8, 0, 16)
-+
-+#define NANDC_CMD_ADDRESS		REG_BIT_FIELD(0xc, 0, 32)
-+#define NANDC_CMD_END_ADDRESS		REG_BIT_FIELD(0x10, 0, 32)
-+
-+#define NANDC_INT_STATUS		REG_BIT_FIELD(0x14, 0, 32)
-+#define NANDC_INT_STAT_CTLR_RDY		REG_BIT_FIELD(0x14, 31, 1)
-+#define NANDC_INT_STAT_FLASH_RDY	REG_BIT_FIELD(0x14, 30, 1)
-+#define NANDC_INT_STAT_CACHE_VALID	REG_BIT_FIELD(0x14, 29, 1)
-+#define NANDC_INT_STAT_SPARE_VALID	REG_BIT_FIELD(0x14, 28, 1)
-+#define NANDC_INT_STAT_ERASED		REG_BIT_FIELD(0x14, 27, 1)
-+#define NANDC_INT_STAT_PLANE_RDY	REG_BIT_FIELD(0x14, 26, 1)
-+#define NANDC_INT_STAT_FLASH_STATUS	REG_BIT_FIELD(0x14, 0, 8)
-+
-+#define NANDC_CS_LOCK			REG_BIT_FIELD(0x18, 31, 1)
-+#define NANDC_CS_AUTO_CONFIG		REG_BIT_FIELD(0x18, 30, 1)
-+#define NANDC_CS_NAND_WP		REG_BIT_FIELD(0x18, 29, 1)
-+#define NANDC_CS_BLK0_WP		REG_BIT_FIELD(0x18, 28, 1)
-+#define NANDC_CS_SW_USING_CS(n)		REG_BIT_FIELD(0x18, 8+(n), 1)
-+#define NANDC_CS_MAP_SEL_CS(n)		REG_BIT_FIELD(0x18, 0+(n), 1)
-+
-+#define NANDC_XOR_ADDR_BLK0_ONLY	REG_BIT_FIELD(0x1c, 31, 1)
-+#define NANDC_XOR_ADDR_CS(n)		REG_BIT_FIELD(0x1c, 0+(n), 1)
-+
-+#define NANDC_LL_OP_RET_IDLE		REG_BIT_FIELD(0x20, 31, 1)
-+#define NANDC_LL_OP_CLE			REG_BIT_FIELD(0x20, 19, 1)
-+#define NANDC_LL_OP_ALE			REG_BIT_FIELD(0x20, 18, 1)
-+#define NANDC_LL_OP_WE			REG_BIT_FIELD(0x20, 17, 1)
-+#define NANDC_LL_OP_RE			REG_BIT_FIELD(0x20, 16, 1)
-+#define NANDC_LL_OP_DATA		REG_BIT_FIELD(0x20, 0, 16)
-+
-+#define NANDC_MPLANE_ADDR_EXT		REG_BIT_FIELD(0x24, 0, 16)
-+#define NANDC_MPLANE_ADDR		REG_BIT_FIELD(0x28, 0, 32)
-+
-+#define NANDC_ACC_CTRL_CS(n)		REG_BIT_FIELD(0x50+((n)<<4), 0, 32)
-+#define NANDC_ACC_CTRL_RD_ECC(n)	REG_BIT_FIELD(0x50+((n)<<4), 31, 1)
-+#define NANDC_ACC_CTRL_WR_ECC(n)	REG_BIT_FIELD(0x50+((n)<<4), 30, 1)
-+#define NANDC_ACC_CTRL_CE_CARE(n)	REG_BIT_FIELD(0x50+((n)<<4), 29, 1)
-+#define NANDC_ACC_CTRL_PGM_RDIN(n)	REG_BIT_FIELD(0x50+((n)<<4), 28, 1)
-+#define NANDC_ACC_CTRL_ERA_ECC_ERR(n)	REG_BIT_FIELD(0x50+((n)<<4), 27, 1)
-+#define NANDC_ACC_CTRL_PGM_PARTIAL(n)	REG_BIT_FIELD(0x50+((n)<<4), 26, 1)
-+#define NANDC_ACC_CTRL_WR_PREEMPT(n)	REG_BIT_FIELD(0x50+((n)<<4), 25, 1)
-+#define NANDC_ACC_CTRL_PG_HIT(n)	REG_BIT_FIELD(0x50+((n)<<4), 24, 1)
-+#define NANDC_ACC_CTRL_PREFETCH(n)	REG_BIT_FIELD(0x50+((n)<<4), 23, 1)
-+#define NANDC_ACC_CTRL_CACHE_MODE(n)	REG_BIT_FIELD(0x50+((n)<<4), 22, 1)
-+#define NANDC_ACC_CTRL_CACHE_LASTPG(n)	REG_BIT_FIELD(0x50+((n)<<4), 21, 1)
-+#define NANDC_ACC_CTRL_ECC_LEVEL(n)	REG_BIT_FIELD(0x50+((n)<<4), 16, 5)
-+#define NANDC_ACC_CTRL_SECTOR_1K(n)	REG_BIT_FIELD(0x50+((n)<<4), 7, 1)
-+#define NANDC_ACC_CTRL_SPARE_SIZE(n)	REG_BIT_FIELD(0x50+((n)<<4), 0, 7)
-+
-+#define NANDC_CONFIG_CS(n)		REG_BIT_FIELD(0x54+((n)<<4), 0, 32)
-+#define NANDC_CONFIG_LOCK(n)		REG_BIT_FIELD(0x54+((n)<<4), 31, 1)
-+#define NANDC_CONFIG_BLK_SIZE(n)	REG_BIT_FIELD(0x54+((n)<<4), 28, 3)
-+#define NANDC_CONFIG_CHIP_SIZE(n)	REG_BIT_FIELD(0x54+((n)<<4), 24, 4)
-+#define NANDC_CONFIG_CHIP_WIDTH(n)	REG_BIT_FIELD(0x54+((n)<<4), 23, 1)
-+#define NANDC_CONFIG_PAGE_SIZE(n)	REG_BIT_FIELD(0x54+((n)<<4), 20, 2)
-+#define NANDC_CONFIG_FUL_ADDR_BYTES(n)	REG_BIT_FIELD(0x54+((n)<<4), 16, 3)
-+#define NANDC_CONFIG_COL_ADDR_BYTES(n)	REG_BIT_FIELD(0x54+((n)<<4), 12, 3)
-+#define NANDC_CONFIG_BLK_ADDR_BYTES(n)	REG_BIT_FIELD(0x54+((n)<<4), 8, 3)
-+
-+#define NANDC_TIMING_1_CS(n)		REG_BIT_FIELD(0x58+((n)<<4), 0, 32)
-+#define NANDC_TIMING_2_CS(n)		REG_BIT_FIELD(0x5c+((n)<<4), 0, 32)
-+	/* Individual bits for Timing registers - TBD */
-+
-+#define NANDC_CORR_STAT_THRESH_CS(n)	REG_BIT_FIELD(0xc0, 6*(n), 6)
-+
-+#define NANDC_BLK_WP_END_ADDR		REG_BIT_FIELD(0xc8, 0, 32)
-+
-+#define NANDC_MPLANE_ERASE_CYC2_OPCODE	REG_BIT_FIELD(0xcc, 24, 8)
-+#define NANDC_MPLANE_READ_STAT_OPCODE	REG_BIT_FIELD(0xcc, 16, 8)
-+#define NANDC_MPLANE_PROG_ODD_OPCODE	REG_BIT_FIELD(0xcc, 8, 8)
-+#define NANDC_MPLANE_PROG_TRL_OPCODE	REG_BIT_FIELD(0xcc, 0, 8)
-+
-+#define NANDC_MPLANE_PGCACHE_TRL_OPCODE	REG_BIT_FIELD(0xd0, 24, 8)
-+#define NANDC_MPLANE_READ_STAT2_OPCODE	REG_BIT_FIELD(0xd0, 16, 8)
-+#define NANDC_MPLANE_READ_EVEN_OPCODE	REG_BIT_FIELD(0xd0, 8, 8)
-+#define NANDC_MPLANE_READ_ODD__OPCODE	REG_BIT_FIELD(0xd0, 0, 8)
-+
-+#define NANDC_MPLANE_CTRL_ERASE_CYC2_EN	REG_BIT_FIELD(0xd4, 31, 1)
-+#define NANDC_MPLANE_CTRL_RD_ADDR_SIZE	REG_BIT_FIELD(0xd4, 30, 1)
-+#define NANDC_MPLANE_CTRL_RD_CYC_ADDR	REG_BIT_FIELD(0xd4, 29, 1)
-+#define NANDC_MPLANE_CTRL_RD_COL_ADDR	REG_BIT_FIELD(0xd4, 28, 1)
-+
-+#define NANDC_UNCORR_ERR_COUNT		REG_BIT_FIELD(0xfc, 0, 32)
-+
-+#define NANDC_CORR_ERR_COUNT		REG_BIT_FIELD(0x100, 0, 32)
-+
-+#define NANDC_READ_CORR_BIT_COUNT	REG_BIT_FIELD(0x104, 0, 32)
-+
-+#define NANDC_BLOCK_LOCK_STATUS		REG_BIT_FIELD(0x108, 0, 8)
-+
-+#define NANDC_ECC_CORR_ADDR_CS		REG_BIT_FIELD(0x10c, 16, 3)
-+#define NANDC_ECC_CORR_ADDR_EXT		REG_BIT_FIELD(0x10c, 0, 16)
-+
-+#define NANDC_ECC_CORR_ADDR		REG_BIT_FIELD(0x110, 0, 32)
-+
-+#define NANDC_ECC_UNC_ADDR_CS		REG_BIT_FIELD(0x114, 16, 3)
-+#define NANDC_ECC_UNC_ADDR_EXT		REG_BIT_FIELD(0x114, 0, 16)
-+
-+#define NANDC_ECC_UNC_ADDR		REG_BIT_FIELD(0x118, 0, 32)
-+
-+#define NANDC_READ_ADDR_CS		REG_BIT_FIELD(0x11c, 16, 3)
-+#define NANDC_READ_ADDR_EXT		REG_BIT_FIELD(0x11c, 0, 16)
-+#define NANDC_READ_ADDR			REG_BIT_FIELD(0x120, 0, 32)
-+
-+#define NANDC_PROG_ADDR_CS		REG_BIT_FIELD(0x124, 16, 3)
-+#define NANDC_PROG_ADDR_EXT		REG_BIT_FIELD(0x124, 0, 16)
-+#define NANDC_PROG_ADDR			REG_BIT_FIELD(0x128, 0, 32)
-+
-+#define NANDC_CPYBK_ADDR_CS		REG_BIT_FIELD(0x12c, 16, 3)
-+#define NANDC_CPYBK_ADDR_EXT		REG_BIT_FIELD(0x12c, 0, 16)
-+#define NANDC_CPYBK_ADDR		REG_BIT_FIELD(0x130, 0, 32)
-+
-+#define NANDC_ERASE_ADDR_CS		REG_BIT_FIELD(0x134, 16, 3)
-+#define NANDC_ERASE_ADDR_EXT		REG_BIT_FIELD(0x134, 0, 16)
-+#define NANDC_ERASE_ADDR		REG_BIT_FIELD(0x138, 0, 32)
-+
-+#define NANDC_INV_READ_ADDR_CS		REG_BIT_FIELD(0x13c, 16, 3)
-+#define NANDC_INV_READ_ADDR_EXT		REG_BIT_FIELD(0x13c, 0, 16)
-+#define NANDC_INV_READ_ADDR		REG_BIT_FIELD(0x140, 0, 32)
-+
-+#define NANDC_INIT_STAT			REG_BIT_FIELD(0x144, 0, 32)
-+#define NANDC_INIT_ONFI_DONE		REG_BIT_FIELD(0x144, 31, 1)
-+#define NANDC_INIT_DEVID_DONE		REG_BIT_FIELD(0x144, 30, 1)
-+#define NANDC_INIT_SUCCESS		REG_BIT_FIELD(0x144, 29, 1)
-+#define NANDC_INIT_FAIL			REG_BIT_FIELD(0x144, 28, 1)
-+#define NANDC_INIT_BLANK		REG_BIT_FIELD(0x144, 27, 1)
-+#define NANDC_INIT_TIMEOUT		REG_BIT_FIELD(0x144, 26, 1)
-+#define NANDC_INIT_UNC_ERROR		REG_BIT_FIELD(0x144, 25, 1)
-+#define NANDC_INIT_CORR_ERROR		REG_BIT_FIELD(0x144, 24, 1)
-+#define NANDC_INIT_PARAM_RDY		REG_BIT_FIELD(0x144, 23, 1)
-+#define NANDC_INIT_AUTH_FAIL		REG_BIT_FIELD(0x144, 22, 1)
-+
-+#define NANDC_ONFI_STAT			REG_BIT_FIELD(0x148, 0, 32)
-+#define NANDC_ONFI_DEBUG		REG_BIT_FIELD(0x148, 28, 4)
-+#define NANDC_ONFI_PRESENT		REG_BIT_FIELD(0x148, 27, 1)
-+#define NANDC_ONFI_BADID_PG2		REG_BIT_FIELD(0x148, 5, 1)
-+#define NANDC_ONFI_BADID_PG1		REG_BIT_FIELD(0x148, 4, 1)
-+#define NANDC_ONFI_BADID_PG0		REG_BIT_FIELD(0x148, 3, 1)
-+#define NANDC_ONFI_BADCRC_PG2		REG_BIT_FIELD(0x148, 2, 1)
-+#define NANDC_ONFI_BADCRC_PG1		REG_BIT_FIELD(0x148, 1, 1)
-+#define NANDC_ONFI_BADCRC_PG0		REG_BIT_FIELD(0x148, 0, 1)
-+
-+#define NANDC_ONFI_DEBUG_DATA		REG_BIT_FIELD(0x14c, 0, 32)
-+
-+#define NANDC_SEMAPHORE			REG_BIT_FIELD(0x150, 0, 8)
-+
-+#define NANDC_DEVID_BYTE(b)		REG_BIT_FIELD(0x194+((b)&0x4), \
-+						24-(((b)&3)<<3), 8)
-+
-+#define NANDC_LL_RDDATA			REG_BIT_FIELD(0x19c, 0, 16)
-+
-+#define NANDC_INT_N_REG(n)		REG_BIT_FIELD(0xf00|((n)<<2), 0, 1)
-+#define NANDC_INT_DIREC_READ_MISS	REG_BIT_FIELD(0xf00, 0, 1)
-+#define NANDC_INT_ERASE_DONE		REG_BIT_FIELD(0xf04, 0, 1)
-+#define NANDC_INT_CPYBK_DONE		REG_BIT_FIELD(0xf08, 0, 1)
-+#define NANDC_INT_PROGRAM_DONE		REG_BIT_FIELD(0xf0c, 0, 1)
-+#define NANDC_INT_CONTROLLER_RDY	REG_BIT_FIELD(0xf10, 0, 1)
-+#define NANDC_INT_RDBSY_RDY		REG_BIT_FIELD(0xf14, 0, 1)
-+#define NANDC_INT_ECC_UNCORRECTABLE	REG_BIT_FIELD(0xf18, 0, 1)
-+#define NANDC_INT_ECC_CORRECTABLE	REG_BIT_FIELD(0xf1c, 0, 1)
-+
-+/*
-+ * Following  registers are treated as contigous IO memory, offset is from
-+ * <reg_base>, and the data is in big-endian byte order
-+ */
-+#define NANDC_SPARE_AREA_READ_OFF	0x200
-+#define NANDC_SPARE_AREA_WRITE_OFF	0x280
-+#define NANDC_CACHE_OFF			0x400
-+#define NANDC_CACHE_SIZE		(128*4)
-+
-+struct bcmnand_areg_field {
-+	unsigned int reg;
-+	unsigned int pos;
-+	unsigned int width;
-+};
-+
-+/*
-+ * Following are IDM (a.k.a. Slave Wrapper) registers are off <idm_base>:
-+ */
-+#define IDMREG_BIT_FIELD(r, p, w)	((struct bcmnand_areg_field){(r), (p), (w)})
-+
-+#define NANDC_IDM_AXI_BIG_ENDIAN	IDMREG_BIT_FIELD(0x408, 28, 1)
-+#define NANDC_IDM_APB_LITTLE_ENDIAN	IDMREG_BIT_FIELD(0x408, 24, 1)
-+#define NANDC_IDM_TM			IDMREG_BIT_FIELD(0x408, 16, 5)
-+#define NANDC_IDM_IRQ_CORRECABLE_EN	IDMREG_BIT_FIELD(0x408, 9, 1)
-+#define NANDC_IDM_IRQ_UNCORRECABLE_EN	IDMREG_BIT_FIELD(0x408, 8, 1)
-+#define NANDC_IDM_IRQ_RDYBSY_RDY_EN	IDMREG_BIT_FIELD(0x408, 7, 1)
-+#define NANDC_IDM_IRQ_CONTROLLER_RDY_EN	IDMREG_BIT_FIELD(0x408, 6, 1)
-+#define NANDC_IDM_IRQ_PRPOGRAM_COMP_EN	IDMREG_BIT_FIELD(0x408, 5, 1)
-+#define NANDC_IDM_IRQ_COPYBK_COMP_EN	IDMREG_BIT_FIELD(0x408, 4, 1)
-+#define NANDC_IDM_IRQ_ERASE_COMP_EN	IDMREG_BIT_FIELD(0x408, 3, 1)
-+#define NANDC_IDM_IRQ_READ_MISS_EN	IDMREG_BIT_FIELD(0x408, 2, 1)
-+#define NANDC_IDM_IRQ_N_EN(n)		IDMREG_BIT_FIELD(0x408, 2+(n), 1)
-+
-+#define NANDC_IDM_CLOCK_EN		IDMREG_BIT_FIELD(0x408, 0, 1)
-+
-+#define NANDC_IDM_IO_ECC_CORR		IDMREG_BIT_FIELD(0x500, 3, 1)
-+#define NANDC_IDM_IO_ECC_UNCORR		IDMREG_BIT_FIELD(0x500, 2, 1)
-+#define NANDC_IDM_IO_RDYBSY		IDMREG_BIT_FIELD(0x500, 1, 1)
-+#define NANDC_IDM_IO_CTRL_RDY		IDMREG_BIT_FIELD(0x500, 0, 1)
-+
-+#define NANDC_IDM_RESET			IDMREG_BIT_FIELD(0x800, 0, 1)
-+	/* Remaining IDM registers do not seem to be useful, skipped */
-+
-+/*
-+ * NAND Controller has its own command opcodes
-+ * different from opcodes sent to the actual flash chip
-+ */
-+#define NANDC_CMD_OPCODE_NULL		0
-+#define NANDC_CMD_OPCODE_PAGE_READ	1
-+#define NANDC_CMD_OPCODE_SPARE_READ	2
-+#define NANDC_CMD_OPCODE_STATUS_READ	3
-+#define NANDC_CMD_OPCODE_PAGE_PROG	4
-+#define NANDC_CMD_OPCODE_SPARE_PROG	5
-+#define NANDC_CMD_OPCODE_DEVID_READ	7
-+#define NANDC_CMD_OPCODE_BLOCK_ERASE	8
-+#define NANDC_CMD_OPCODE_FLASH_RESET	9
-+
-+/*
-+ * NAND Controller hardware ECC data size
-+ *
-+ * The following table contains the number of bytes needed for
-+ * each of the ECC levels, per "sector", which is either 512 or 1024 bytes.
-+ * The actual layout is as follows:
-+ * The entire spare area is equally divided into as many sections as there
-+ * are sectors per page, and the ECC data is located at the end of each
-+ * of these sections.
-+ * For example, given a 2K per page and 64 bytes spare device, configured for
-+ * sector size 1k and ECC level of 4, the spare area will be divided into 2
-+ * sections 32 bytes each, and the last 14 bytes of 32 in each section will
-+ * be filled with ECC data.
-+ * Note: the name of the algorythm and the number of error bits it can correct
-+ * is of no consequence to this driver, therefore omitted.
-+ */
-+struct bcmnand_ecc_size_s {
-+	unsigned char sector_size_shift;
-+	unsigned char ecc_level;
-+	unsigned char ecc_bytes_per_sec;
-+	unsigned char reserved;
-+};
-+
-+static const struct bcmnand_ecc_size_s bcmnand_ecc_sizes[] = {
-+	{ 9,	0,	0 },
-+	{ 10,	0,	0 },
-+	{ 9,	1,	2 },
-+	{ 10,	1,	4 },
-+	{ 9,	2,	4 },
-+	{ 10,	2,	7 },
-+	{ 9,	3,	6 },
-+	{ 10,	3,	11 },
-+	{ 9,	4,	7 },
-+	{ 10,	4,	14 },
-+	{ 9,	5,	9 },
-+	{ 10,	5,	18 },
-+	{ 9,	6,	11 },
-+	{ 10,	6,	21 },
-+	{ 9,	7,	13 },
-+	{ 10,	7,	25 },
-+	{ 9,	8,	14 },
-+	{ 10,	8,	28 },
-+
-+	{ 9,	9,	16 },
-+	{ 9,	10,	18 },
-+	{ 9,	11,	20 },
-+	{ 9,	12,	21 },
-+
-+	{ 10,	9,	32 },
-+	{ 10,	10,	35 },
-+	{ 10,	11,	39 },
-+	{ 10,	12,	42 },
-+};
-+
-+/*
-+ * Populate the various fields that depend on how
-+ * the hardware ECC data is located in the spare area
-+ *
-+ * For this controiller, it is easier to fill-in these
-+ * structures at run time.
-+ *
-+ * The bad-block marker is assumed to occupy one byte
-+ * at chip->badblockpos, which must be in the first
-+ * sector of the spare area, namely it is either
-+ * at offset 0 or 5.
-+ * Some chips use both for manufacturer's bad block
-+ * markers, but we ingore that issue here, and assume only
-+ * one byte is used as bad-block marker always.
-+ */
-+static int bcmnand_hw_ecc_layout(struct bcmnand_ctrl *ctrl)
-+{
-+	struct nand_ecclayout *layout;
-+	struct device *dev = &ctrl->core->dev;
-+	unsigned int i, j, k;
-+	unsigned int ecc_per_sec, oob_per_sec;
-+	unsigned int bbm_pos = ctrl->nand.badblockpos;
-+
-+	/* Caclculate spare area per sector size */
-+	oob_per_sec = ctrl->mtd.oobsize >> ctrl->sec_per_page_shift;
-+
-+	/* Try to calculate the amount of ECC bytes per sector with a formula */
-+	if (ctrl->sector_size_shift == 9)
-+		ecc_per_sec = ((ctrl->ecc_level * 14) + 7) >> 3;
-+	else if (ctrl->sector_size_shift == 10)
-+		ecc_per_sec = ((ctrl->ecc_level * 14) + 3) >> 2;
-+	else
-+		ecc_per_sec = oob_per_sec + 1;	/* cause an error if not in table */
-+
-+	/* Now find out the answer according to the table */
-+	for (i = 0; i < ARRAY_SIZE(bcmnand_ecc_sizes); i++) {
-+		if (bcmnand_ecc_sizes[i].ecc_level == ctrl->ecc_level &&
-+		    bcmnand_ecc_sizes[i].sector_size_shift ==
-+				ctrl->sector_size_shift) {
-+			break;
-+		}
-+	}
-+
-+	/* Table match overrides formula */
-+	if (bcmnand_ecc_sizes[i].ecc_level == ctrl->ecc_level &&
-+	    bcmnand_ecc_sizes[i].sector_size_shift == ctrl->sector_size_shift)
-+		ecc_per_sec = bcmnand_ecc_sizes[i].ecc_bytes_per_sec;
-+
-+	/* Return an error if calculated ECC leaves no room for OOB */
-+	if ((ctrl->sec_per_page_shift != 0 && ecc_per_sec >= oob_per_sec) ||
-+	    (ctrl->sec_per_page_shift == 0 && ecc_per_sec >= (oob_per_sec - 1))) {
-+		dev_err(dev, "ECC level %d too high, leaves no room for OOB data\n",
-+			ctrl->ecc_level);
-+		return -EINVAL;
-+	}
-+
-+	/* Fill in the needed fields */
-+	ctrl->nand.ecc.size = ctrl->mtd.writesize >> ctrl->sec_per_page_shift;
-+	ctrl->nand.ecc.bytes = ecc_per_sec;
-+	ctrl->nand.ecc.steps = 1 << ctrl->sec_per_page_shift;
-+	ctrl->nand.ecc.total = ecc_per_sec << ctrl->sec_per_page_shift;
-+	ctrl->nand.ecc.strength = ctrl->ecc_level;
-+
-+	/* Build an ecc layout data structure */
-+	layout = &ctrl->ecclayout;
-+	memset(layout, 0, sizeof(*layout));
-+
-+	/* Total number of bytes used by HW ECC */
-+	layout->eccbytes = ecc_per_sec << ctrl->sec_per_page_shift;
-+
-+	/* Location for each of the HW ECC bytes */
-+	for (i = j = 0, k = 1;
-+	     i < ARRAY_SIZE(layout->eccpos) && i < layout->eccbytes;
-+	     i++, j++) {
-+		/* switch sector # */
-+		if (j == ecc_per_sec) {
-+			j = 0;
-+			k++;
-+		}
-+		/* save position of each HW-generated ECC byte */
-+		layout->eccpos[i] = (oob_per_sec * k) - ecc_per_sec + j;
-+
-+		/* Check that HW ECC does not overlap bad-block marker */
-+		if (bbm_pos == layout->eccpos[i]) {
-+			dev_err(dev, "ECC level %d too high, HW ECC collides with bad-block marker position\n",
-+				ctrl->ecc_level);
-+			return -EINVAL;
-+		}
-+	}
-+
-+	/* Location of all user-available OOB byte-ranges */
-+	for (i = 0; i < ARRAY_SIZE(layout->oobfree); i++) {
-+		struct nand_oobfree *oobfree = &layout->oobfree[i];
-+
-+		if (i >= (1 << ctrl->sec_per_page_shift))
-+			break;
-+		oobfree->offset = oob_per_sec * i;
-+		oobfree->length = oob_per_sec - ecc_per_sec;
-+
-+		/* Bad-block marker must be in the first sector spare area */
-+		if (WARN_ON(bbm_pos >= (oobfree->offset + oobfree->length)))
-+			return -EINVAL;
-+
-+		if (i != 0)
-+			continue;
-+
-+		/* Remove bad-block marker from available byte range */
-+		if (bbm_pos == oobfree->offset) {
-+			oobfree->offset += 1;
-+			oobfree->length -= 1;
-+		} else if (bbm_pos == (oobfree->offset + oobfree->length - 1)) {
-+			oobfree->length -= 1;
-+		} else {
-+			layout->oobfree[i + 1].offset = bbm_pos + 1;
-+			layout->oobfree[i + 1].length =
-+				oobfree->length - bbm_pos - 1;
-+			oobfree->length = bbm_pos;
-+			i++;
-+		}
-+	}
-+
-+	layout->oobavail = ((oob_per_sec - ecc_per_sec)
-+		<< ctrl->sec_per_page_shift) - 1;
-+
-+	ctrl->mtd.oobavail = layout->oobavail;
-+	ctrl->nand.ecc.layout = layout;
-+
-+	/* Output layout for debugging */
-+	dev_dbg(dev, "Spare area=%d eccbytes %d, ecc bytes located at:\n",
-+		ctrl->mtd.oobsize, layout->eccbytes);
-+	for (i = j = 0;
-+	     i < ARRAY_SIZE(layout->eccpos) && i < layout->eccbytes; i++)
-+		pr_debug(" %d", layout->eccpos[i]);
-+	pr_debug("\n");
-+
-+	dev_dbg(dev, "Available %d bytes at (off,len):\n", layout->oobavail);
-+	for (i = 0; i < ARRAY_SIZE(layout->oobfree); i++)
-+		pr_debug("(%d,%d) ", layout->oobfree[i].offset,
-+			 layout->oobfree[i].length);
-+	pr_debug("\n");
-+
-+	return 0;
-+}
-+
-+/*
-+ * Register bit-field manipulation routines
-+ */
-+
-+static inline unsigned int bcmnand_reg_read(struct bcmnand_ctrl *ctrl,
-+					    struct bcmnand_reg_field rbf)
-+{
-+	u32 val;
-+
-+	val = bcma_read32(ctrl->core, rbf.reg);
-+	val >>= rbf.pos;
-+	val &= (1 << rbf.width) - 1;
-+
-+	return val;
-+}
-+
-+static inline void bcmnand_reg_write(struct bcmnand_ctrl *ctrl,
-+				     struct bcmnand_reg_field rbf,
-+				     unsigned newval)
-+{
-+	u32 val, msk;
-+
-+	msk = (1 << rbf.width) - 1;
-+	msk <<= rbf.pos;
-+	newval <<= rbf.pos;
-+	newval &= msk;
-+
-+	val = bcma_read32(ctrl->core, rbf.reg);
-+	val &= ~msk;
-+	val |= newval;
-+	bcma_write32(ctrl->core, rbf.reg, val);
-+}
-+
-+static inline unsigned int bcmnand_reg_aread(struct bcmnand_ctrl *ctrl,
-+					     struct bcmnand_areg_field rbf)
-+{
-+	u32 val;
-+
-+	val = bcma_aread32(ctrl->core, rbf.reg);
-+	val >>= rbf.pos;
-+	val &= (1 << rbf.width) - 1;
-+
-+	return val;
-+}
-+
-+static inline void bcmnand_reg_awrite(struct bcmnand_ctrl *ctrl,
-+				      struct bcmnand_areg_field rbf,
-+				      unsigned int newval)
-+{
-+	u32 val, msk;
-+
-+	msk = (1 << rbf.width) - 1;
-+	msk <<= rbf.pos;
-+	newval <<= rbf.pos;
-+	newval &= msk;
-+
-+	val = bcma_aread32(ctrl->core, rbf.reg);
-+	val &= ~msk;
-+	val |= newval;
-+	bcma_awrite32(ctrl->core, rbf.reg, val);
-+}
-+
-+/*
-+ * NAND Interface - dev_ready
-+ *
-+ * Return 1 iff device is ready, 0 otherwise
-+ */
-+static int bcmnand_dev_ready(struct mtd_info *mtd)
-+{
-+	struct nand_chip *chip = mtd->priv;
-+	struct bcmnand_ctrl *ctrl = chip->priv;
-+
-+	return bcmnand_reg_aread(ctrl, NANDC_IDM_IO_CTRL_RDY);
-+}
-+
-+/*
-+ * Interrupt service routines
-+ */
-+static irqreturn_t bcmnand_isr(int irq, void *dev_id)
-+{
-+	struct bcmnand_ctrl *ctrl = dev_id;
-+	int irq_off;
-+
-+	irq_off = irq - ctrl->core->irq;
-+	WARN_ON(irq_off < 0 || irq_off >= NANDC_IRQ_NUM);
-+
-+	if (!bcmnand_reg_read(ctrl, NANDC_INT_N_REG(irq_off)))
-+		return IRQ_NONE;
-+
-+	/* Acknowledge interrupt */
-+	bcmnand_reg_write(ctrl, NANDC_INT_N_REG(irq_off), 1);
-+
-+	/* Wake up task */
-+	complete(&ctrl->op_completion);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int bcmnand_wait_interrupt(struct bcmnand_ctrl *ctrl,
-+				  unsigned int irq_off,
-+				  unsigned int timeout_usec)
-+{
-+	long timeout_jiffies;
-+	int ret = 0;
-+
-+	reinit_completion(&ctrl->op_completion);
-+
-+	/* Acknowledge interrupt */
-+	bcmnand_reg_write(ctrl, NANDC_INT_N_REG(irq_off), 1);
-+
-+	/* Enable IRQ to wait on */
-+	bcmnand_reg_awrite(ctrl, NANDC_IDM_IRQ_N_EN(irq_off), 1);
-+
-+	timeout_jiffies = 1 + usecs_to_jiffies(timeout_usec);
-+
-+	if (irq_off != NANDC_IRQ_CONTROLLER_RDY ||
-+		0 == bcmnand_reg_aread(ctrl, NANDC_IDM_IO_CTRL_RDY)) {
-+
-+		timeout_jiffies = wait_for_completion_interruptible_timeout(
-+					&ctrl->op_completion, timeout_jiffies);
-+
-+		if (timeout_jiffies < 0)
-+			ret =  timeout_jiffies;
-+		if (timeout_jiffies == 0)
-+			ret = -ETIME;
-+	}
-+
-+	/* Disable IRQ, we're done waiting */
-+	bcmnand_reg_awrite(ctrl, NANDC_IDM_IRQ_N_EN(irq_off), 0);
-+
-+	if (bcmnand_reg_aread(ctrl, NANDC_IDM_IO_CTRL_RDY))
-+		ret = 0;
-+
-+	return ret;
-+}
-+
-+/*
-+ * wait for command completion
-+ */
-+static int bcmnand_wait_cmd(struct bcmnand_ctrl *ctrl, unsigned int timeout_usec)
-+{
-+	unsigned int retries;
-+
-+	if (bcmnand_reg_read(ctrl, NANDC_INT_STAT_CTLR_RDY))
-+		return 0;
-+
-+	/* If the timeout is long, wait for interrupt */
-+	if (timeout_usec >= jiffies_to_usecs(1) >> 4)
-+		return bcmnand_wait_interrupt(
-+			ctrl, NANDC_IRQ_CONTROLLER_RDY, timeout_usec);
-+
-+	/* Wait for completion of the prior command */
-+	retries = (timeout_usec >> 3) + 1;
-+
-+	while (retries-- &&
-+		0 == bcmnand_reg_read(ctrl, NANDC_INT_STAT_CTLR_RDY)) {
-+		cpu_relax();
-+		udelay(6);
-+	}
-+
-+	if (retries == 0)
-+		return -ETIME;
-+
-+	return 0;
-+}
-+
-+
-+/*
-+ * NAND Interface - waitfunc
-+ */
-+static int bcmnand_waitfunc(struct mtd_info *mtd, struct nand_chip *chip)
-+{
-+	struct bcmnand_ctrl *ctrl = chip->priv;
-+	unsigned int to;
-+	int ret;
-+
-+	/* figure out timeout based on what command is on */
-+	switch (ctrl->last_cmd) {
-+	default:
-+	case NAND_CMD_ERASE1:
-+	case NAND_CMD_ERASE2:
-+		to = 1 << 16;
-+		break;
-+	case NAND_CMD_STATUS:
-+	case NAND_CMD_RESET:
-+		to = 256;
-+		break;
-+	case NAND_CMD_READID:
-+		to = 1024;
-+		break;
-+	case NAND_CMD_READ1:
-+	case NAND_CMD_READ0:
-+		to = 2048;
-+		break;
-+	case NAND_CMD_PAGEPROG:
-+		to = 4096;
-+		break;
-+	case NAND_CMD_READOOB:
-+		to = 512;
-+		break;
-+	}
-+
-+	/* deliver deferred error code if any */
-+	ret = ctrl->cmd_ret;
-+	if (ret < 0)
-+		ctrl->cmd_ret = 0;
-+	else
-+		ret = bcmnand_wait_cmd(ctrl, to);
-+
-+	/* Timeout */
-+	if (ret < 0)
-+		return NAND_STATUS_FAIL;
-+
-+	ret = bcmnand_reg_read(ctrl, NANDC_INT_STAT_FLASH_STATUS);
-+
-+	return ret;
-+}
-+
-+/*
-+ * NAND Interface - read_oob
-+ */
-+static int bcmnand_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
-+			    int page)
-+{
-+	struct bcmnand_ctrl *ctrl = chip->priv;
-+	unsigned int n = ctrl->chip_num;
-+	void __iomem *ctrl_spare;
-+	unsigned int spare_per_sec, sector;
-+	u64 nand_addr;
-+
-+	ctrl_spare = ctrl->core->io_addr + NANDC_SPARE_AREA_READ_OFF;
-+
-+	/* Set the page address for the following commands */
-+	nand_addr = ((u64)page << chip->page_shift);
-+	bcmnand_reg_write(ctrl, NANDC_CMD_EXT_ADDR, nand_addr >> 32);
-+
-+	spare_per_sec = mtd->oobsize >> ctrl->sec_per_page_shift;
-+
-+	/* Disable ECC validation for spare area reads */
-+	bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_RD_ECC(n), 0);
-+
-+	/* Loop all sectors in page */
-+	for (sector = 0; sector < (1<<ctrl->sec_per_page_shift); sector++) {
-+		unsigned int col;
-+
-+		col = (sector << ctrl->sector_size_shift);
-+
-+		/* Issue command to read partial page */
-+		bcmnand_reg_write(ctrl, NANDC_CMD_ADDRESS, nand_addr + col);
-+
-+		bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE,
-+				  NANDC_CMD_OPCODE_SPARE_READ);
-+
-+		/* Wait for the command to complete */
-+		if (bcmnand_wait_cmd(ctrl, (sector == 0) ? 10000 : 100))
-+			return -EIO;
-+
-+		if (!bcmnand_reg_read(ctrl, NANDC_INT_STAT_SPARE_VALID))
-+			return -EIO;
-+
-+		/* Set controller to Little Endian mode for copying */
-+		bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, 1);
-+
-+		memcpy(chip->oob_poi + sector * spare_per_sec,
-+		       ctrl_spare, spare_per_sec);
-+
-+		/* Return to Big Endian mode for commands etc */
-+		bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, 0);
-+	}
-+
-+	return 0;
-+}
-+
-+/*
-+ * NAND Interface - write_oob
-+ */
-+static int bcmnand_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
-+			     int page)
-+{
-+	struct bcmnand_ctrl *ctrl = chip->priv;
-+	unsigned int n = ctrl->chip_num;
-+	void __iomem *ctrl_spare;
-+	unsigned int spare_per_sec, sector, num_sec;
-+	u64 nand_addr;
-+	int to, status = 0;
-+
-+	ctrl_spare = ctrl->core->io_addr + NANDC_SPARE_AREA_WRITE_OFF;
-+
-+	/* Disable ECC generation for spare area writes */
-+	bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_WR_ECC(n), 0);
-+
-+	spare_per_sec = mtd->oobsize >> ctrl->sec_per_page_shift;
-+
-+	/* Set the page address for the following commands */
-+	nand_addr = ((u64)page << chip->page_shift);
-+	bcmnand_reg_write(ctrl, NANDC_CMD_EXT_ADDR, nand_addr >> 32);
-+
-+	/* Must allow partial programming to change spare area only */
-+	bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_PGM_PARTIAL(n), 1);
-+
-+	num_sec = 1 << ctrl->sec_per_page_shift;
-+	/* Loop all sectors in page */
-+	for (sector = 0; sector < num_sec; sector++) {
-+		unsigned int col;
-+
-+		/* Spare area accessed by the data sector offset */
-+		col = (sector << ctrl->sector_size_shift);
-+
-+		bcmnand_reg_write(ctrl, NANDC_CMD_ADDRESS, nand_addr + col);
-+
-+		/* Set controller to Little Endian mode for copying */
-+		bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, 1);
-+
-+		memcpy(ctrl_spare, chip->oob_poi + sector * spare_per_sec,
-+		       spare_per_sec);
-+
-+		/* Return to Big Endian mode for commands etc */
-+		bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, 0);
-+
-+		/* Push spare bytes into internal buffer, last goes to flash */
-+		bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE,
-+				  NANDC_CMD_OPCODE_SPARE_PROG);
-+
-+		if (sector == (num_sec - 1))
-+			to = 1 << 16;
-+		else
-+			to = 1 << 10;
-+
-+		if (bcmnand_wait_cmd(ctrl, to))
-+			return -EIO;
-+	}
-+
-+	/* Restore partial programming inhibition */
-+	bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_PGM_PARTIAL(n), 0);
-+
-+	status = bcmnand_waitfunc(mtd, chip);
-+	return status & NAND_STATUS_FAIL ? -EIO : 0;
-+}
-+
-+/*
-+ * verify that a buffer is all erased
-+ */
-+static bool bcmnand_buf_erased(const void *buf, unsigned int len)
-+{
-+	unsigned int i;
-+	const u32 *p = buf;
-+
-+	for (i = 0; i < (len >> 2); i++) {
-+		if (p[i] != 0xffffffff)
-+			return false;
-+	}
-+	return true;
-+}
-+
-+/*
-+ * read a page, with or without ECC checking
-+ */
-+static int bcmnand_read_page_do(struct mtd_info *mtd, struct nand_chip *chip,
-+				uint8_t *buf, int page, bool ecc)
-+{
-+	struct bcmnand_ctrl *ctrl = chip->priv;
-+	unsigned int n = ctrl->chip_num;
-+	void __iomem *ctrl_cache;
-+	void __iomem *ctrl_spare;
-+	unsigned int data_bytes;
-+	unsigned int spare_per_sec;
-+	unsigned int sector, to = 1 << 16;
-+	u32 err_soft_reg, err_hard_reg;
-+	unsigned int hard_err_count = 0;
-+	int ret;
-+	u64 nand_addr;
-+
-+	ctrl_cache = ctrl->core->io_addr + NANDC_CACHE_OFF;
-+	ctrl_spare = ctrl->core->io_addr + NANDC_SPARE_AREA_READ_OFF;
-+
-+	/* Reset  ECC error stats */
-+	err_hard_reg = bcmnand_reg_read(ctrl, NANDC_UNCORR_ERR_COUNT);
-+	err_soft_reg = bcmnand_reg_read(ctrl, NANDC_READ_CORR_BIT_COUNT);
-+
-+	spare_per_sec = mtd->oobsize >> ctrl->sec_per_page_shift;
-+
-+	/* Set the page address for the following commands */
-+	nand_addr = ((u64)page << chip->page_shift);
-+	bcmnand_reg_write(ctrl, NANDC_CMD_EXT_ADDR, nand_addr >> 32);
-+
-+	/* Enable ECC validation for ecc page reads */
-+	bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_RD_ECC(n), ecc);
-+
-+	/* Loop all sectors in page */
-+	for (sector = 0; sector < (1 << ctrl->sec_per_page_shift); sector++) {
-+		data_bytes  = 0;
-+
-+		/* Copy partial sectors sized by cache reg */
-+		while (data_bytes < (1<<ctrl->sector_size_shift)) {
-+			unsigned int col;
-+
-+			col = data_bytes + (sector << ctrl->sector_size_shift);
-+
-+			bcmnand_reg_write(ctrl, NANDC_CMD_ADDRESS,
-+					  nand_addr + col);
-+
-+			/* Issue command to read partial page */
-+			bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE,
-+					  NANDC_CMD_OPCODE_PAGE_READ);
-+
-+			/* Wait for the command to complete */
-+			ret = bcmnand_wait_cmd(ctrl, to);
-+			if (ret < 0)
-+				return ret;
-+
-+			/* Set controller to Little Endian mode for copying */
-+			bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, 1);
-+
-+			if (data_bytes == 0) {
-+				memcpy(chip->oob_poi + sector * spare_per_sec,
-+				       ctrl_spare, spare_per_sec);
-+			}
-+
-+			memcpy(buf + col, ctrl_cache, NANDC_CACHE_SIZE);
-+			data_bytes += NANDC_CACHE_SIZE;
-+
-+			/* Return to Big Endian mode for commands etc */
-+			bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, 0);
-+
-+			/* Next iterations should go fast */
-+			to = 1 << 10;
-+
-+			/* capture hard errors for each partial */
-+			if (err_hard_reg != bcmnand_reg_read(ctrl, NANDC_UNCORR_ERR_COUNT)) {
-+				int era = bcmnand_reg_read(ctrl, NANDC_INT_STAT_ERASED);
-+
-+				if (!era &&
-+				    !bcmnand_buf_erased(buf + col, NANDC_CACHE_SIZE))
-+					hard_err_count++;
-+
-+				err_hard_reg = bcmnand_reg_read(ctrl,
-+							NANDC_UNCORR_ERR_COUNT);
-+			}
-+		}
-+	}
-+
-+	if (!ecc)
-+		return 0;
-+
-+	/* Report hard ECC errors */
-+	if (hard_err_count)
-+		mtd->ecc_stats.failed++;
-+
-+	/* Get ECC soft error stats */
-+	mtd->ecc_stats.corrected += err_soft_reg -
-+			bcmnand_reg_read(ctrl, NANDC_READ_CORR_BIT_COUNT);
-+
-+	return 0;
-+}
-+
-+/*
-+ * NAND Interface - read_page_ecc
-+ */
-+static int bcmnand_read_page_ecc(struct mtd_info *mtd, struct nand_chip *chip,
-+				 uint8_t *buf, int oob_required, int page)
-+{
-+	return bcmnand_read_page_do(mtd, chip, buf, page, true);
-+}
-+
-+/*
-+ * NAND Interface - read_page_raw
-+ */
-+static int bcmnand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
-+				 uint8_t *buf, int oob_required, int page)
-+{
-+	return bcmnand_read_page_do(mtd, chip, buf, page, true);
-+}
-+
-+/*
-+ * do page write, with or without ECC generation enabled
-+ */
-+static int bcmnand_write_page_do(struct mtd_info *mtd, struct nand_chip *chip,
-+				 const uint8_t *buf, bool ecc)
-+{
-+	struct bcmnand_ctrl *ctrl = chip->priv;
-+	unsigned int n = ctrl->chip_num;
-+	void __iomem *ctrl_cache;
-+	void __iomem *ctrl_spare;
-+	unsigned int spare_per_sec, sector, num_sec;
-+	unsigned int data_bytes, spare_bytes;
-+	int i, to;
-+	uint8_t *tmp_poi;
-+	u32 nand_addr;
-+
-+	ctrl_cache = ctrl->core->io_addr + NANDC_CACHE_OFF;
-+	ctrl_spare = ctrl->core->io_addr + NANDC_SPARE_AREA_WRITE_OFF;
-+
-+	/* Get start-of-page address */
-+	nand_addr = bcmnand_reg_read(ctrl, NANDC_CMD_ADDRESS);
-+
-+	tmp_poi = kmalloc(mtd->oobsize, GFP_KERNEL);
-+	if (!tmp_poi)
-+		return -ENOMEM;
-+
-+	/* Retreive pre-existing OOB values */
-+	memcpy(tmp_poi, chip->oob_poi, mtd->oobsize);
-+	ctrl->cmd_ret = bcmnand_read_oob(mtd, chip,
-+					 nand_addr >> chip->page_shift);
-+	if (ctrl->cmd_ret < 0) {
-+		kfree(tmp_poi);
-+		return ctrl->cmd_ret;
-+	}
-+
-+	/* Apply new OOB data bytes just like they would end up on the chip */
-+	for (i = 0; i < mtd->oobsize; i++)
-+		chip->oob_poi[i] &= tmp_poi[i];
-+	kfree(tmp_poi);
-+
-+	spare_per_sec = mtd->oobsize >> ctrl->sec_per_page_shift;
-+
-+	/* Enable ECC generation for ecc page write, if requested */
-+	bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_WR_ECC(n), ecc);
-+
-+	spare_bytes = 0;
-+	num_sec = 1 << ctrl->sec_per_page_shift;
-+
-+	/* Loop all sectors in page */
-+	for (sector = 0; sector < num_sec; sector++) {
-+		data_bytes  = 0;
-+
-+		/* Copy partial sectors sized by cache reg */
-+		while (data_bytes < (1<<ctrl->sector_size_shift)) {
-+			unsigned int col;
-+
-+			col = data_bytes +
-+				(sector << ctrl->sector_size_shift);
-+
-+			/* Set address of 512-byte sub-page */
-+			bcmnand_reg_write(ctrl, NANDC_CMD_ADDRESS,
-+					  nand_addr + col);
-+
-+			/* Set controller to Little Endian mode for copying */
-+			bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN,
-+					   1);
-+
-+			/* Set spare area is written at each sector start */
-+			if (data_bytes == 0) {
-+				memcpy(ctrl_spare,
-+					chip->oob_poi + spare_bytes,
-+					spare_per_sec);
-+				spare_bytes += spare_per_sec;
-+			}
-+
-+			/* Copy sub-page data */
-+			memcpy(ctrl_cache, buf + col, NANDC_CACHE_SIZE);
-+			data_bytes += NANDC_CACHE_SIZE;
-+
-+			/* Return to Big Endian mode for commands etc */
-+			bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, 0);
-+
-+			/* Push data into internal cache */
-+			bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE,
-+					  NANDC_CMD_OPCODE_PAGE_PROG);
-+
-+			/* Wait for the command to complete */
-+			if (sector == (num_sec - 1))
-+				to = 1 << 16;
-+			else
-+				to = 1 << 10;
-+			ctrl->cmd_ret = bcmnand_wait_cmd(ctrl, to);
-+			if (ctrl->cmd_ret < 0)
-+				return ctrl->cmd_ret;
-+		}
-+	}
-+	return 0;
-+}
-+
-+/*
-+ * NAND Interface = write_page_ecc
-+ */
-+static int bcmnand_write_page_ecc(struct mtd_info *mtd, struct nand_chip *chip,
-+				  const uint8_t *buf, int oob_required)
-+{
-+	return bcmnand_write_page_do(mtd, chip, buf, true);
-+}
-+
-+/*
-+ * NAND Interface = write_page_raw
-+ */
-+static int bcmnand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
-+				  const uint8_t *buf, int oob_required)
-+{
-+	return bcmnand_write_page_do(mtd, chip, buf, false);
-+}
-+
-+/*
-+ * MTD Interface - read_byte
-+ *
-+ * This function emulates simple controllers behavior
-+ * for just a few relevant commands
-+ */
-+static uint8_t bcmnand_read_byte(struct mtd_info *mtd)
-+{
-+	struct nand_chip *nand = mtd->priv;
-+	struct bcmnand_ctrl *ctrl = nand->priv;
-+	struct device *dev = &ctrl->core->dev;
-+	uint8_t b = ~0;
-+
-+	switch (ctrl->last_cmd) {
-+	case NAND_CMD_READID:
-+		if (ctrl->id_byte_index < 8) {
-+			b = bcmnand_reg_read(ctrl, NANDC_DEVID_BYTE(
-+							ctrl->id_byte_index));
-+			ctrl->id_byte_index++;
-+		}
-+		break;
-+	case NAND_CMD_READOOB:
-+		if (ctrl->oob_index < mtd->oobsize)
-+			b = nand->oob_poi[ctrl->oob_index++];
-+		break;
-+	case NAND_CMD_STATUS:
-+		b = bcmnand_reg_read(ctrl, NANDC_INT_STAT_FLASH_STATUS);
-+		break;
-+	default:
-+		dev_err(dev, "got unkown command: 0x%x in read_byte\n",
-+			ctrl->last_cmd);
-+	}
-+	return b;
-+}
-+
-+/*
-+ * MTD Interface - read_word
-+ *
-+ * Can not be tested without x16 chip, but the SoC does not support x16 i/f.
-+ */
-+static u16 bcmnand_read_word(struct mtd_info *mtd)
-+{
-+	u16 w = ~0;
-+
-+	w = bcmnand_read_byte(mtd);
-+	barrier();
-+	w |= bcmnand_read_byte(mtd) << 8;
-+
-+	return w;
-+}
-+
-+/*
-+ * MTD Interface - select a chip from an array
-+ */
-+static void bcmnand_select_chip(struct mtd_info *mtd, int chip)
-+{
-+	struct nand_chip *nand = mtd->priv;
-+	struct bcmnand_ctrl *ctrl = nand->priv;
-+
-+	ctrl->chip_num = chip;
-+	bcmnand_reg_write(ctrl, NANDC_CMD_CS_SEL, chip);
-+}
-+
-+/*
-+ * NAND Interface - emulate low-level NAND commands
-+ *
-+ * Only a few low-level commands are really needed by generic NAND,
-+ * and they do not call for CMD_LL operations the controller can support.
-+ */
-+static void bcmnand_cmdfunc(struct mtd_info *mtd, unsigned int command,
-+			    int column, int page_addr)
-+{
-+	struct nand_chip *nand = mtd->priv;
-+	struct bcmnand_ctrl *ctrl = nand->priv;
-+	struct device *dev = &ctrl->core->dev;
-+	u64 nand_addr;
-+	unsigned int to = 1;
-+
-+	ctrl->last_cmd = command;
-+
-+	/* Set address for some commands */
-+	switch (command) {
-+	case NAND_CMD_ERASE1:
-+		column = 0;
-+		/*FALLTHROUGH*/
-+	case NAND_CMD_SEQIN:
-+	case NAND_CMD_READ0:
-+	case NAND_CMD_READ1:
-+		WARN_ON(column >= mtd->writesize);
-+		nand_addr = (u64) column |
-+			((u64)page_addr << nand->page_shift);
-+		bcmnand_reg_write(ctrl, NANDC_CMD_EXT_ADDR, nand_addr >> 32);
-+		bcmnand_reg_write(ctrl, NANDC_CMD_ADDRESS, nand_addr);
-+		break;
-+	case NAND_CMD_ERASE2:
-+	case NAND_CMD_RESET:
-+	case NAND_CMD_READID:
-+	case NAND_CMD_READOOB:
-+	case NAND_CMD_PAGEPROG:
-+	default:
-+		/* Do nothing, address not used */
-+		break;
-+	}
-+
-+	/* Issue appropriate command to controller */
-+	switch (command) {
-+	case NAND_CMD_SEQIN:
-+		/* Only need to load command address, done */
-+		return;
-+
-+	case NAND_CMD_RESET:
-+		bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE,
-+				  NANDC_CMD_OPCODE_FLASH_RESET);
-+		to = 1 << 8;
-+		break;
-+
-+	case NAND_CMD_READID:
-+		bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE,
-+				  NANDC_CMD_OPCODE_DEVID_READ);
-+		ctrl->id_byte_index = 0;
-+		to = 1 << 8;
-+		break;
-+
-+	case NAND_CMD_READ0:
-+	case NAND_CMD_READ1:
-+		bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE,
-+				  NANDC_CMD_OPCODE_PAGE_READ);
-+		to = 1 << 15;
-+		break;
-+	case NAND_CMD_STATUS:
-+		bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE,
-+				  NANDC_CMD_OPCODE_STATUS_READ);
-+		to = 1 << 8;
-+		break;
-+	case NAND_CMD_ERASE1:
-+		return;
-+
-+	case NAND_CMD_ERASE2:
-+		bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE,
-+				  NANDC_CMD_OPCODE_BLOCK_ERASE);
-+		to = 1 << 18;
-+		break;
-+
-+	case NAND_CMD_PAGEPROG:
-+		/* Cmd already set from write_page */
-+		return;
-+
-+	case NAND_CMD_READOOB:
-+		/* Emulate simple interface */
-+		bcmnand_read_oob(mtd, nand, page_addr);
-+		ctrl->oob_index = 0;
-+		return;
-+
-+	default:
-+		dev_err(dev, "got unkown command: 0x%x in cmdfunc\n",
-+			ctrl->last_cmd);
-+	}
-+
-+	/* Wait for command to complete */
-+	ctrl->cmd_ret = bcmnand_wait_cmd(ctrl, to);
-+
-+}
-+
-+static int bcmnand_scan(struct mtd_info *mtd)
-+{
-+	struct nand_chip *nand = mtd->priv;
-+	struct bcmnand_ctrl *ctrl = nand->priv;
-+	struct device *dev = &ctrl->core->dev;
-+	bool sector_1k = false;
-+	unsigned int chip_num = 0;
-+	int ecc_level = 0;
-+	int ret;
-+
-+	ret = nand_scan_ident(mtd, NANDC_MAX_CHIPS, NULL);
-+	if (ret)
-+		return ret;
-+
-+	/* Get configuration from first chip */
-+	sector_1k = bcmnand_reg_read(ctrl, NANDC_ACC_CTRL_SECTOR_1K(0));
-+	ecc_level = bcmnand_reg_read(ctrl, NANDC_ACC_CTRL_ECC_LEVEL(0));
-+	mtd->writesize_shift = nand->page_shift;
-+
-+	ctrl->ecc_level = ecc_level;
-+	ctrl->sector_size_shift = sector_1k ? 10 : 9;
-+
-+	/* Configure spare area, tweak as needed */
-+	do {
-+		ctrl->sec_per_page_shift =
-+			mtd->writesize_shift - ctrl->sector_size_shift;
-+
-+		/* will return -EINVAL if OOB space exhausted */
-+		ret = bcmnand_hw_ecc_layout(ctrl);
-+
-+		/* First try to bump sector size to 1k, then decrease level */
-+		if (ret && nand->page_shift > 9 && ctrl->sector_size_shift < 10)
-+			ctrl->sector_size_shift = 10;
-+		else if (ret)
-+			ctrl->ecc_level--;
-+
-+	} while (ret && ctrl->ecc_level > 0);
-+
-+	if (WARN_ON(ctrl->ecc_level == 0))
-+		return -ENOENT;
-+
-+	if ((ctrl->sector_size_shift > 9) != (sector_1k == 1)) {
-+		dev_info(dev, "sector size adjusted to 1k\n");
-+		sector_1k = 1;
-+	}
-+
-+	if (ecc_level != ctrl->ecc_level) {
-+		dev_info(dev, "ECC level adjusted from %u to %u\n",
-+			 ecc_level, ctrl->ecc_level);
-+		ecc_level = ctrl->ecc_level;
-+	}
-+
-+	/* handle the hardware chip config registers */
-+	for (chip_num = 0; chip_num < nand->numchips; chip_num++) {
-+		bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_SECTOR_1K(chip_num),
-+				  sector_1k);
-+		bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_ECC_LEVEL(chip_num),
-+				  ecc_level);
-+
-+		/* Large pages: no partial page programming */
-+		if (mtd->writesize > 512) {
-+			bcmnand_reg_write(ctrl,
-+				NANDC_ACC_CTRL_PGM_RDIN(chip_num), 0);
-+			bcmnand_reg_write(ctrl,
-+				NANDC_ACC_CTRL_PGM_PARTIAL(chip_num), 0);
-+		}
-+
-+		/* Do not raise ECC error when reading erased pages */
-+		/* This bit has only partial effect, driver needs to help */
-+		bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_ERA_ECC_ERR(chip_num),
-+				  0);
-+
-+		bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_PG_HIT(chip_num), 0);
-+		bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_PREFETCH(chip_num), 0);
-+		bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_CACHE_MODE(chip_num), 0);
-+		bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_CACHE_LASTPG(chip_num),
-+				  0);
-+
-+		/* TBD: consolidate or at least verify the s/w and h/w geometries agree */
-+	}
-+
-+	/* Allow writing on device */
-+	if (!(nand->options & NAND_ROM))
-+		bcmnand_reg_write(ctrl, NANDC_CS_NAND_WP, 0);
-+
-+	dev_dbg(dev, "layout.oobavail=%d\n", nand->ecc.layout->oobavail);
-+
-+	ret = nand_scan_tail(mtd);
-+
-+	if (nand->badblockbits == 0)
-+		nand->badblockbits = 8;
-+	if (WARN_ON((1 << nand->page_shift) != mtd->writesize))
-+		return -EIO;
-+
-+	/* Spit out some key chip parameters as detected by nand_base */
-+	dev_dbg(dev, "erasesize=%d writesize=%d oobsize=%d page_shift=%d badblockpos=%d badblockbits=%d\n",
-+		mtd->erasesize, mtd->writesize, mtd->oobsize,
-+		nand->page_shift, nand->badblockpos, nand->badblockbits);
-+
-+	return ret;
-+}
-+
-+/*
-+ * main intiailization function
-+ */
-+static int bcmnand_ctrl_init(struct bcmnand_ctrl *ctrl)
-+{
-+	unsigned int chip;
-+	struct nand_chip *nand;
-+	struct mtd_info *mtd;
-+	struct device *dev = &ctrl->core->dev;
-+	int ret;
-+
-+	/* Software variables init */
-+	nand = &ctrl->nand;
-+	mtd = &ctrl->mtd;
-+
-+	init_completion(&ctrl->op_completion);
-+
-+	mtd->priv = nand;
-+	mtd->owner = THIS_MODULE;
-+	mtd->name = KBUILD_MODNAME;
-+
-+	nand->priv = ctrl;
-+
-+	nand->chip_delay = 5;	/* not used */
-+	nand->IO_ADDR_R = nand->IO_ADDR_W = (void *)~0L;
-+
-+	if (bcmnand_reg_read(ctrl, NANDC_CONFIG_CHIP_WIDTH(0)))
-+		nand->options |= NAND_BUSWIDTH_16;
-+	nand->options |= NAND_SKIP_BBTSCAN;	/* Dont need BBTs */
-+
-+	nand->options |= NAND_NO_SUBPAGE_WRITE; /* Subpages unsupported */
-+
-+	nand->dev_ready			= bcmnand_dev_ready;
-+	nand->read_byte			= bcmnand_read_byte;
-+	nand->read_word			= bcmnand_read_word;
-+	nand->select_chip		= bcmnand_select_chip;
-+	nand->cmdfunc			= bcmnand_cmdfunc;
-+	nand->waitfunc			= bcmnand_waitfunc;
-+
-+	nand->ecc.mode			= NAND_ECC_HW;
-+	nand->ecc.read_page_raw		= bcmnand_read_page_raw;
-+	nand->ecc.write_page_raw	= bcmnand_write_page_raw;
-+	nand->ecc.read_page		= bcmnand_read_page_ecc;
-+	nand->ecc.write_page		= bcmnand_write_page_ecc;
-+	nand->ecc.read_oob		= bcmnand_read_oob;
-+	nand->ecc.write_oob		= bcmnand_write_oob;
-+
-+	/* Set AUTO_CNFIG bit - try to auto-detect chips */
-+	bcmnand_reg_write(ctrl, NANDC_CS_AUTO_CONFIG, 1);
-+
-+	usleep_range(1000, 1500);
-+
-+	/* Print out current chip config */
-+	for (chip = 0; chip < NANDC_MAX_CHIPS; chip++) {
-+		dev_dbg(dev, "chip[%d]: size=%#x block=%#x page=%#x ecc_level=%#x\n",
-+			chip,
-+			bcmnand_reg_read(ctrl, NANDC_CONFIG_CHIP_SIZE(chip)),
-+			bcmnand_reg_read(ctrl, NANDC_CONFIG_BLK_SIZE(chip)),
-+			bcmnand_reg_read(ctrl, NANDC_CONFIG_PAGE_SIZE(chip)),
-+			bcmnand_reg_read(ctrl, NANDC_ACC_CTRL_ECC_LEVEL(chip)));
-+	}
-+
-+	dev_dbg(dev, "Nand controller is reads=%d\n",
-+		bcmnand_reg_aread(ctrl, NANDC_IDM_IO_CTRL_RDY));
-+
-+	ret = bcmnand_scan(mtd);
-+	if (ret) {
-+		dev_err(dev, "scanning the nand flash chip failed with %i\n",
-+			ret);
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static int bcmnand_idm_init(struct bcmnand_ctrl *ctrl)
-+{
-+	int irq_off;
-+	unsigned int retries = 0x1000;
-+	struct device *dev = &ctrl->core->dev;
-+
-+	if (bcmnand_reg_aread(ctrl, NANDC_IDM_RESET))
-+		dev_info(dev, "stuck in reset\n");
-+
-+	bcmnand_reg_awrite(ctrl, NANDC_IDM_RESET, 1);
-+	if (!bcmnand_reg_aread(ctrl, NANDC_IDM_RESET)) {
-+		dev_err(dev, "reset of failed\n");
-+		return -EIO;
-+	}
-+
-+	while (bcmnand_reg_aread(ctrl, NANDC_IDM_RESET)) {
-+		bcmnand_reg_awrite(ctrl, NANDC_IDM_RESET, 0);
-+		cpu_relax();
-+		usleep_range(100, 150);
-+		if (!(retries--)) {
-+			dev_err(dev, "did not came back from reset\n");
-+			return -ETIMEDOUT;
-+		}
-+	}
-+
-+	bcmnand_reg_awrite(ctrl, NANDC_IDM_CLOCK_EN, 1);
-+	bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, 0);
-+	udelay(10);
-+
-+	dev_info(dev, "NAND Controller rev %d.%02d\n",
-+		bcmnand_reg_read(ctrl, NANDC_REV_MAJOR),
-+		bcmnand_reg_read(ctrl, NANDC_REV_MINOR));
-+
-+	usleep_range(250, 350);
-+
-+	/* Disable all IRQs */
-+	for (irq_off = 0; irq_off < NANDC_IRQ_NUM; irq_off++)
-+		bcmnand_reg_awrite(ctrl, NANDC_IDM_IRQ_N_EN(irq_off), 0);
-+
-+	return 0;
-+}
-+
-+static const char * const part_probes[] = { "ofpart", "bcm47xxpart", NULL };
-+
-+/*
-+ * Top-level init function
-+ */
-+static int bcmnand_probe(struct bcma_device *core)
-+{
-+	struct mtd_part_parser_data parser_data;
-+	struct device *dev = &core->dev;
-+	struct bcmnand_ctrl *ctrl;
-+	int res, i, irq;
-+
-+	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
-+	if (!ctrl)
-+		return -ENOMEM;
-+
-+	bcma_set_drvdata(core, ctrl);
-+
-+	ctrl->mtd.dev.parent = &core->dev;
-+	ctrl->core = core;
-+
-+	/* Acquire all interrupt lines */
-+	for (i = 0; i < NANDC_IRQ_NUM; i++) {
-+		irq = bcma_core_irq(core, i);
-+		if (!irq) {
-+			dev_err(dev, "IRQ idx %i not available\n", i);
-+			return -ENOENT;
-+		}
-+		res = devm_request_irq(dev, irq, bcmnand_isr, 0,
-+				       KBUILD_MODNAME, ctrl);
-+		if (res < 0) {
-+			dev_err(dev, "problem requesting irq: %i (idx: %i)\n",
-+				irq, i);
-+			return res;
-+		}
-+	}
-+
-+	res = bcmnand_idm_init(ctrl);
-+	if (res)
-+		return res;
-+
-+	res = bcmnand_ctrl_init(ctrl);
-+	if (res)
-+		return res;
-+
-+	parser_data.of_node = dev->of_node;
-+	res = mtd_device_parse_register(&ctrl->mtd, part_probes, &parser_data, NULL, 0);
-+	if (res) {
-+		dev_err(dev, "Failed to register MTD device: %d\n", res);
-+		return res;
-+	}
-+	return 0;
-+}
-+
-+static void bcmnand_remove(struct bcma_device *core)
-+{
-+	struct bcmnand_ctrl *ctrl = bcma_get_drvdata(core);
-+
-+	mtd_device_unregister(&ctrl->mtd);
-+}
-+
-+static const struct bcma_device_id bcmnand_bcma_tbl[] = {
-+	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_NAND, BCMA_ANY_REV, BCMA_ANY_CLASS),
-+	BCMA_CORETABLE_END
-+};
-+MODULE_DEVICE_TABLE(bcma, bgmac_bcma_tbl);
-+
-+static struct bcma_driver bcmnand_bcma_driver = {
-+	.name		= KBUILD_MODNAME,
-+	.id_table	= bcmnand_bcma_tbl,
-+	.probe		= bcmnand_probe,
-+	.remove		= bcmnand_remove,
-+};
-+
-+static int __init bcmnand_init(void)
-+{
-+	return bcma_driver_register(&bcmnand_bcma_driver);
-+}
-+
-+static void __exit bcmnand_exit(void)
-+{
-+	bcma_driver_unregister(&bcmnand_bcma_driver);
-+}
-+
-+module_init(bcmnand_init)
-+module_exit(bcmnand_exit)
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Hauke Mehrtens");
-+MODULE_DESCRIPTION("Northstar on-chip NAND Flash Controller driver");
diff --git a/target/linux/bcm53xx/patches-3.14/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch b/target/linux/bcm53xx/patches-3.14/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch
deleted file mode 100644
index b8229cd..0000000
--- a/target/linux/bcm53xx/patches-3.14/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From f41f8b42db092e505382f7120994de21590dff48 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 16 Oct 2014 20:52:16 +0200
-Subject: [PATCH] UBI: Detect EOF mark and erase all remaining blocks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/mtd/ubi/io.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/mtd/ubi/io.c
-+++ b/drivers/mtd/ubi/io.c
-@@ -727,6 +727,7 @@ bad:
-  * o %UBI_IO_FF if only 0xFF bytes were read (the PEB is supposedly empty)
-  * o a negative error code in case of failure.
-  */
-+static bool erase_all_next = false;
- int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
- 		       struct ubi_ec_hdr *ec_hdr, int verbose)
- {
-@@ -753,6 +754,10 @@ int ubi_io_read_ec_hdr(struct ubi_device
- 	}
- 
- 	magic = be32_to_cpu(ec_hdr->magic);
-+	if (magic == 0xdeadc0de)
-+		erase_all_next = true;
-+	if (erase_all_next)
-+		return read_err ? UBI_IO_FF_BITFLIPS : UBI_IO_FF;
- 	if (magic != UBI_EC_HDR_MAGIC) {
- 		if (mtd_is_eccerr(read_err))
- 			return UBI_IO_BAD_HDR_EBADMSG;
diff --git a/target/linux/bcm53xx/patches-3.14/800-bcma-use-two-different-initcalls-if-built-in.patch b/target/linux/bcm53xx/patches-3.14/800-bcma-use-two-different-initcalls-if-built-in.patch
deleted file mode 100644
index 6ae555b..0000000
--- a/target/linux/bcm53xx/patches-3.14/800-bcma-use-two-different-initcalls-if-built-in.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 666bdfc027cde41a171862dc698987a378c8b66a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Mon, 9 Feb 2015 18:00:42 +0100
-Subject: [PATCH RFC] bcma: use two different initcalls if built-in
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is needed as we can't initialize bus during fs_initcall.
-Initialization requires SPROM which depends on NVRAM which depends on
-mtd. Since mtd, spi, nand, spi-nor use standard module_init, we have to
-do the same in bcma.
-Without this we'll try to initialize SPROM without having a ready SPROM
-proviver registered using bcma_arch_register_fallback_sprom.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-While this patch seems to work and I can compile bcma as built-in and
-module, I'm not too proud of it. I don't really like these #if(n)def
-tricks and I'm afraid bcma_modinit may be called even if
-bcma_modinit_early failed.
-
-Do you see any better idea of solving this?
----
- drivers/bcma/main.c | 16 ++++++++++++++--
- 1 file changed, 14 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
-index 9635f10..c394207 100644
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -637,13 +637,25 @@ static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env)
- 			      core->id.rev, core->id.class);
- }
- 
-+/* Bus has to be registered early, before any bcma driver */
-+static int __init bcma_modinit_early(void)
-+{
-+	return bus_register(&bcma_bus_type);
-+}
-+#ifndef MODULE
-+fs_initcall(bcma_modinit_early);
-+#endif
-+
-+/* Initialization has to be done later with SPI/mtd/NAND/SPROM available */
- static int __init bcma_modinit(void)
- {
- 	int err;
- 
--	err = bus_register(&bcma_bus_type);
-+#ifdef MODULE
-+	err = bcma_modinit_early();
- 	if (err)
- 		return err;
-+#endif
- 
- 	err = bcma_host_soc_register_driver();
- 	if (err) {
-@@ -660,7 +672,7 @@ static int __init bcma_modinit(void)
- 
- 	return err;
- }
--fs_initcall(bcma_modinit);
-+module_init(bcma_modinit);
- 
- static void __exit bcma_modexit(void)
- {
--- 
-1.8.4.5
-
diff --git a/target/linux/bcm53xx/patches-3.14/900-bgmac-some-fixes-to-get-bgmac-work.patch b/target/linux/bcm53xx/patches-3.14/900-bgmac-some-fixes-to-get-bgmac-work.patch
deleted file mode 100644
index caf2f33..0000000
--- a/target/linux/bcm53xx/patches-3.14/900-bgmac-some-fixes-to-get-bgmac-work.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 0bd576e93a188fd3aab769b622fb3d35fa9bc7a7 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 3 May 2014 19:55:38 +0200
-Subject: [PATCH 15/15] bgmac: some fixes to get bgmac work
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/net/ethernet/broadcom/Kconfig | 2 +-
- drivers/net/phy/phy_device.c          | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/Kconfig
-+++ b/drivers/net/ethernet/broadcom/Kconfig
-@@ -131,7 +131,7 @@ config BNX2X_SRIOV
- 
- config BGMAC
- 	tristate "BCMA bus GBit core support"
--	depends on BCMA_HOST_SOC && HAS_DMA && BCM47XX
-+	depends on BCMA_HOST_SOC && HAS_DMA
- 	select PHYLIB
- 	---help---
- 	  This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -898,7 +898,7 @@ int genphy_update_link(struct phy_device
- 		return status;
- 
- 	if ((status & BMSR_LSTATUS) == 0)
--		phydev->link = 0;
-+		phydev->link = 1;
- 	else
- 		phydev->link = 1;
-