cleanup patch of the USB driver

SVN-Revision: 8408

1 files changed, 0 insertions, 166 deletions

diff --git a/target/linux/adm5120-2.6/patches-2.6.22/005-adm5120_usb.patch b/target/linux/adm5120-2.6/patches-2.6.22/005-adm5120_usb.patch
index 73f326e..9b2272a 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/005-adm5120_usb.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/005-adm5120_usb.patch
@@ -2,15 +2,6 @@ Index: linux-2.6.22.1/drivers/usb/core/hub.c
 ===================================================================
 --- linux-2.6.22.1.orig/drivers/usb/core/hub.c
 +++ linux-2.6.22.1/drivers/usb/core/hub.c
-@@ -464,7 +464,7 @@ void usb_hub_tt_clear_buffer (struct usb
- 			: (USB_ENDPOINT_XFER_BULK << 11);
- 	if (usb_pipein (pipe))
- 		clear->devinfo |= 1 << 15;
--	
-+
- 	/* tell keventd to clear state for this TT */
- 	spin_lock_irqsave (&tt->lock, flags);
- 	list_add_tail (&clear->clear_list, &tt->clear_list);
 @@ -540,7 +540,7 @@ static int hub_hub_status(struct usb_hub
  			"%s failed (err = %d)\n", __FUNCTION__, ret);
  	else {
@@ -29,42 +20,6 @@ Index: linux-2.6.22.1/drivers/usb/core/hub.c
  		ret = 0;
  	}
  	mutex_unlock(&hub->status_mutex);
-@@ -2007,7 +2007,7 @@ static inline int remote_wakeup(struct u
-  * Between connect detection and reset signaling there must be a delay
-  * of 100ms at least for debounce and power-settling.  The corresponding
-  * timer shall restart whenever the downstream port detects a disconnect.
-- * 
-+ *
-  * Apparently there are some bluetooth and irda-dongles and a number of
-  * low-speed devices for which this debounce period may last over a second.
-  * Not covered by the spec - but easy to deal with.
-@@ -2142,7 +2142,7 @@ hub_port_init (struct usb_hub *hub, stru
- 		goto fail;
- 	}
- 	oldspeed = udev->speed;
--  
-+
- 	/* USB 2.0 section 5.5.3 talks about ep0 maxpacket ...
- 	 * it's fixed size except for full speed devices.
- 	 * For Wireless USB devices, ep0 max packet is always 512 (tho
-@@ -2168,7 +2168,7 @@ hub_port_init (struct usb_hub *hub, stru
- 	default:
- 		goto fail;
- 	}
-- 
-+
- 	type = "";
- 	switch (udev->speed) {
- 	case USB_SPEED_LOW:	speed = "low";	break;
-@@ -2194,7 +2194,7 @@ hub_port_init (struct usb_hub *hub, stru
- 		udev->tt = &hub->tt;
- 		udev->ttport = port1;
- 	}
-- 
-+
- 	/* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way?
- 	 * Because device hardware and firmware is sometimes buggy in
- 	 * this area, and this is how Linux has done it for ages.
 @@ -2230,6 +2230,8 @@ hub_port_init (struct usb_hub *hub, stru
  					USB_DT_DEVICE << 8, 0,
  					buf, GET_DESCRIPTOR_BUFSIZE,
@@ -74,114 +29,6 @@ Index: linux-2.6.22.1/drivers/usb/core/hub.c
  				switch (buf->bMaxPacketSize0) {
  				case 8: case 16: case 32: case 64: case 255:
  					if (buf->bDescriptorType ==
-@@ -2281,7 +2283,7 @@ hub_port_init (struct usb_hub *hub, stru
- 				udev->devnum, retval);
- 			goto fail;
- 		}
-- 
-+
- 		/* cope with hardware quirkiness:
- 		 *  - let SET_ADDRESS settle, some device hardware wants it
- 		 *  - read ep0 maxpacket even for high and low speed,
-@@ -2318,7 +2320,7 @@ hub_port_init (struct usb_hub *hub, stru
- 		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i);
- 		ep0_reinit(udev);
- 	}
--  
-+
- 	retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE);
- 	if (retval < (signed)sizeof(udev->descriptor)) {
- 		dev_err(&udev->dev, "device descriptor read/%s, error %d\n",
-@@ -2416,7 +2418,7 @@ static void hub_port_connect_change(stru
- 	struct device *hub_dev = hub->intfdev;
- 	u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
- 	int status, i;
-- 
-+
- 	dev_dbg (hub_dev,
- 		"port %d, status %04x, change %04x, %s\n",
- 		port1, portstatus, portchange, portspeed (portstatus));
-@@ -2425,7 +2427,7 @@ static void hub_port_connect_change(stru
- 		set_port_led(hub, port1, HUB_LED_AUTO);
- 		hub->indicator[port1-1] = INDICATOR_AUTO;
- 	}
-- 
-+
- 	/* Disconnect any existing devices under this port */
- 	if (hdev->children[port1-1])
- 		usb_disconnect(&hdev->children[port1-1]);
-@@ -2455,7 +2457,7 @@ static void hub_port_connect_change(stru
- 		if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
- 				&& !(portstatus & (1 << USB_PORT_FEAT_POWER)))
- 			set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
-- 
-+
- 		if (portstatus & USB_PORT_STAT_ENABLE)
-   			goto done;
- 		return;
-@@ -2535,7 +2537,7 @@ static void hub_port_connect_change(stru
- 				goto loop_disable;
- 			}
- 		}
-- 
-+
- 		/* check for devices running slower than they could */
- 		if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200
- 				&& udev->speed == USB_SPEED_FULL
-@@ -2587,7 +2589,7 @@ loop:
- 		if (status == -ENOTCONN)
- 			break;
- 	}
-- 
-+
- done:
- 	hub_port_disable(hub, port1, 1);
- }
-@@ -2720,7 +2722,7 @@ static void hub_events(void)
- 				 * EM interference sometimes causes badly
- 				 * shielded USB devices to be shutdown by
- 				 * the hub, this hack enables them again.
--				 * Works at least with mouse driver. 
-+				 * Works at least with mouse driver.
- 				 */
- 				if (!(portstatus & USB_PORT_STAT_ENABLE)
- 				    && !connect_change
-@@ -2750,7 +2752,7 @@ static void hub_events(void)
- 					"resume on port %d, status %d\n",
- 					i, ret);
- 			}
--			
-+
- 			if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
- 				dev_err (hub_dev,
- 					"over-current change on port %d\n",
-@@ -2985,7 +2987,7 @@ int usb_reset_device(struct usb_device *
- 
- 	if (ret < 0)
- 		goto re_enumerate;
-- 
-+
- 	/* Device might have changed firmware (DFU or similar) */
- 	if (memcmp(&udev->descriptor, &descriptor, sizeof descriptor)
- 			|| config_descriptors_changed (udev)) {
-@@ -2993,7 +2995,7 @@ int usb_reset_device(struct usb_device *
- 		udev->descriptor = descriptor;	/* for disconnect() calls */
- 		goto re_enumerate;
-   	}
--  
-+
- 	if (!udev->actconfig)
- 		goto done;
- 
-@@ -3031,7 +3033,7 @@ int usb_reset_device(struct usb_device *
- 
- done:
- 	return 0;
-- 
-+
- re_enumerate:
- 	hub_port_logical_disconnect(parent_hub, port1);
- 	return -ENODEV;
 Index: linux-2.6.22.1/drivers/usb/host/Kconfig
 ===================================================================
 --- linux-2.6.22.1.orig/drivers/usb/host/Kconfig
@@ -205,19 +52,6 @@ Index: linux-2.6.22.1/drivers/usb/host/Makefile
  obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
  obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
  obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
-Index: linux-2.6.22.1/drivers/usb/Kconfig
-===================================================================
---- linux-2.6.22.1.orig/drivers/usb/Kconfig
-+++ linux-2.6.22.1/drivers/usb/Kconfig
-@@ -88,8 +88,6 @@ source "drivers/usb/storage/Kconfig"
- 
- source "drivers/usb/image/Kconfig"
- 
--source "drivers/usb/mon/Kconfig"
--
- comment "USB port drivers"
- 	depends on USB
- 
 Index: linux-2.6.22.1/drivers/usb/Makefile
 ===================================================================
 --- linux-2.6.22.1.orig/drivers/usb/Makefile