Serial patches for .21

SVN-Revision: 7375

2 files changed, 91 insertions, 104 deletions

diff --git a/target/linux/at91-2.6/patches/008-fdl-serial.patch b/target/linux/at91-2.6/patches/008-fdl-serial.patch
index cac6744..4258919 100644
--- a/target/linux/at91-2.6/patches/008-fdl-serial.patch
+++ b/target/linux/at91-2.6/patches/008-fdl-serial.patch
@@ -1,75 +1,72 @@
---- linux-2.6.19.2.old/drivers/serial/atmel_serial.c	2007-05-01 13:08:03.000000000 +0200
-+++ linux-2.6.19.2/drivers/serial/atmel_serial.c	2007-05-09 17:13:34.000000000 +0200
-@@ -173,6 +173,34 @@
+--- linux-2.6.21.1.orig/drivers/serial/atmel_serial.c	2007-05-28 12:22:29.000000000 +0200
++++ linux-2.6.21.1/drivers/serial/atmel_serial.c	2007-05-28 16:39:09.000000000 +0200
+@@ -174,7 +174,35 @@
  				at91_set_gpio_value(AT91_PIN_PA21, 0);
  			else
  				at91_set_gpio_value(AT91_PIN_PA21, 1);
 +
-+			/* 
-+			 * FDL VersaLink adds GPIOS to provide full modem control on
-+			 * USART 0 - Drive DTR and RI pins manually
-+			 */
-+			if (mctrl & TIOCM_DTR)
-+				at91_set_gpio_value(AT91_PIN_PB6, 0);
-+			else
-+				at91_set_gpio_value(AT91_PIN_PB6, 1);
-+			if (mctrl & TIOCM_RI)
-+				at91_set_gpio_value(AT91_PIN_PB7, 0);
-+			else
-+				at91_set_gpio_value(AT91_PIN_PB7, 1);
-+		}
-+
-+		/* 
-+		 * FDL VersaLink adds GPIOS to provide full modem control on
-+		 * USART 3 - Drive DTR and RI pins manually
-+		 */
-+		if (port->mapbase == AT91RM9200_BASE_US3) {
-+			if (mctrl & TIOCM_DTR)
-+				at91_set_gpio_value(AT91_PIN_PB29, 0);
-+			else
-+				at91_set_gpio_value(AT91_PIN_PB29, 1);
-+			if (mctrl & TIOCM_RI)
-+				at91_set_gpio_value(AT91_PIN_PB2, 0);
-+			else
-+				at91_set_gpio_value(AT91_PIN_PB2, 1);
++      /*
++       * FDL VersaLink adds GPIOS to provide full modem control on
++       * USART 0 - Drive DTR and RI pins manually
++       */
++      if (mctrl & TIOCM_DTR)
++        at91_set_gpio_value(AT91_PIN_PB6, 0);
++      else
++        at91_set_gpio_value(AT91_PIN_PB6, 1);
++      if (mctrl & TIOCM_RI)
++        at91_set_gpio_value(AT91_PIN_PB7, 0);
++      else
++        at91_set_gpio_value(AT91_PIN_PB7, 1);
  		}
++
++    /*
++     * FDL VersaLink adds GPIOS to provide full modem control on
++     * USART 3 - Drive DTR and RI pins manually
++     */
++    if (port->mapbase == AT91RM9200_BASE_US3) {
++      if (mctrl & TIOCM_DTR)
++        at91_set_gpio_value(AT91_PIN_PB29, 0);
++      else
++        at91_set_gpio_value(AT91_PIN_PB29, 1);
++      if (mctrl & TIOCM_RI)
++        at91_set_gpio_value(AT91_PIN_PB2, 0);
++      else
++        at91_set_gpio_value(AT91_PIN_PB2, 1);
++    }
  	}
  #endif
-@@ -210,8 +238,14 @@
+ 
+@@ -211,8 +239,10 @@
  	/*
  	 * The control signals are active low.
  	 */
 -	if (!(status & ATMEL_US_DCD))
 -		ret |= TIOCM_CD;
 +
-+	/* 
-+	 * Ignore DCD reister for USARTS 0 and 3 as FDL Versalink uses
-+	 * GPIO's for these signals
-+	 */
-+	if (!(port->mapbase == AT91RM9200_BASE_US0 || port->mapbase == AT91RM9200_BASE_US3))
++  if (!(port->mapbase == AT91RM9200_BASE_US0 || port->mapbase == AT91RM9200_BASE_US3))
 +		if (!(status & ATMEL_US_DCD))
 +			ret |= TIOCM_CD;
  	if (!(status & ATMEL_US_CTS))
  		ret |= TIOCM_CTS;
  	if (!(status & ATMEL_US_DSR))
-@@ -219,6 +253,16 @@
+@@ -220,6 +250,16 @@
  	if (!(status & ATMEL_US_RI))
  		ret |= TIOCM_RI;
  
-+	/*
-+	 * Read the GPIO's for the FDL VersaLink special case
-+	 */
-+	if (port->mapbase == AT91RM9200_BASE_US0)
-+		if (!(at91_get_gpio_value(AT91_PIN_PA19)))
-+			ret |= TIOCM_CD;
-+	if (port->mapbase == AT91RM9200_BASE_US3)
-+		if (!(at91_get_gpio_value(AT91_PIN_PA24)))
-+			ret |= TIOCM_CD;
++  /*
++   * Read the GPIO's for the FDL VersaLink special case
++   */
++  if (port->mapbase == AT91RM9200_BASE_US0)
++    if (!(at91_get_gpio_value(AT91_PIN_PA19)))
++      ret |= TIOCM_CD;
++  if (port->mapbase == AT91RM9200_BASE_US3)
++    if (!(at91_get_gpio_value(AT91_PIN_PA24)))
++      ret |= TIOCM_CD;
 +
  	return ret;
  }
  
-@@ -510,6 +554,34 @@
+@@ -511,6 +551,34 @@
  }
  
  /*
@@ -78,12 +75,12 @@
 +
 +static irqreturn_t atmel_u0_DCD_interrupt(int irq, void *dev_id)
 +{
-+	struct uart_port *port = dev_id;
-+	int status = at91_get_gpio_value(irq);
-+	
-+	uart_handle_dcd_change(port, !(status));
++  struct uart_port *port = dev_id;
++  int status = at91_get_gpio_value(irq);
++
++  uart_handle_dcd_change(port, !(status));
 +
-+	return IRQ_HANDLED;
++  return IRQ_HANDLED;
 +}
 +
 +/*
@@ -92,19 +89,19 @@
 +
 +static irqreturn_t atmel_u3_DCD_interrupt(int irq, void *dev_id)
 +{
-+	struct uart_port *port = dev_id;
-+	int status = at91_get_gpio_value(irq);
-+	
-+	uart_handle_dcd_change(port, !(status));
++  struct uart_port *port = dev_id;
++  int status = at91_get_gpio_value(irq);
++
++  uart_handle_dcd_change(port, !(status));
 +
-+	return IRQ_HANDLED;
++  return IRQ_HANDLED;
 +}
 +
 +/*
   * Interrupt handler
   */
  static irqreturn_t atmel_interrupt(int irq, void *dev_id)
-@@ -586,6 +658,24 @@
+@@ -587,6 +655,23 @@
  		return retval;
  	}
  
@@ -125,40 +122,39 @@
 +		}
 +	}
 +
-+
-  	/*
+ 	/*
  	 * Initialize DMA (if necessary)
  	 */
-@@ -602,6 +692,10 @@
+@@ -603,6 +688,10 @@
  					kfree(atmel_port->pdc_rx[0].buf);
  				}
  				free_irq(port->irq, port);
-+				if (port->mapbase == AT91RM9200_BASE_US0)
-+					free_irq(AT91_PIN_PA19, port);
-+				if (port->mapbase == AT91RM9200_BASE_US3)
-+					free_irq(AT91_PIN_PA24, port);
++        if (port->mapbase == AT91RM9200_BASE_US0)
++          free_irq(AT91_PIN_PA19, port);
++        if (port->mapbase == AT91RM9200_BASE_US3)
++          free_irq(AT91_PIN_PA24, port);
  				return -ENOMEM;
  			}
  			pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
-@@ -635,6 +729,10 @@
+@@ -636,6 +725,10 @@
  		retval = atmel_open_hook(port);
  		if (retval) {
  			free_irq(port->irq, port);
-+			if (port->mapbase == AT91RM9200_BASE_US0)
-+				free_irq(AT91_PIN_PA19, port);
-+			if (port->mapbase == AT91RM9200_BASE_US3)
-+				free_irq(AT91_PIN_PA24, port);
++      if (port->mapbase == AT91RM9200_BASE_US0)
++        free_irq(AT91_PIN_PA19, port);
++      if (port->mapbase == AT91RM9200_BASE_US3)
++        free_irq(AT91_PIN_PA24, port);
  			return retval;
  		}
  	}
-@@ -694,6 +792,10 @@
+@@ -701,6 +794,10 @@
  	 * Free the interrupt
  	 */
  	free_irq(port->irq, port);
-+	if (port->mapbase == AT91RM9200_BASE_US0)
-+		free_irq(AT91_PIN_PA19, port);
-+	if (port->mapbase == AT91RM9200_BASE_US3)
-+		free_irq(AT91_PIN_PA24, port);
++  if (port->mapbase == AT91RM9200_BASE_US0)
++    free_irq(AT91_PIN_PA19, port);
++  if (port->mapbase == AT91RM9200_BASE_US3)
++    free_irq(AT91_PIN_PA24, port);
  
  	/*
  	 * If there is a specific "close" function (to unregister
diff --git a/target/linux/at91-2.6/patches/009-fdl-uartinit.patch b/target/linux/at91-2.6/patches/009-fdl-uartinit.patch
index 26d7986..f2491f3 100644
--- a/target/linux/at91-2.6/patches/009-fdl-uartinit.patch
+++ b/target/linux/at91-2.6/patches/009-fdl-uartinit.patch
@@ -1,43 +1,34 @@
-diff -urN linux-2.6.19.2.old/arch/arm/mach-at91rm9200/at91rm9200_devices.c linux-2.6.19.2/arch/arm/mach-at91rm9200/at91rm9200_devices.c
---- linux-2.6.19.2.old/arch/arm/mach-at91rm9200/at91rm9200_devices.c	2007-05-01 13:08:02.000000000 +0200
-+++ linux-2.6.19.2/arch/arm/mach-at91rm9200/at91rm9200_devices.c	2007-05-09 12:59:58.000000000 +0200
-@@ -709,6 +709,10 @@
+--- linux-2.6.21.1.orig/arch/arm/mach-at91/at91rm9200_devices.c	2007-05-28 12:22:29.000000000 +0200
++++ linux-2.6.21.1/arch/arm/mach-at91/at91rm9200_devices.c	2007-05-28 16:44:36.000000000 +0200
+@@ -618,7 +618,6 @@
+ 
+ 
+ #if defined(CONFIG_NEW_LEDS)
+-
+ static struct platform_device at91_leds = {
+ 	.name		= "at91_leds",
+ 	.id		= -1,
+@@ -724,6 +723,10 @@
  	 *  We need to drive the pin manually.  Default is off (RTS is active low).
  	 */
  	at91_set_gpio_output(AT91_PIN_PA21, 1);
-+	at91_set_gpio_output(AT91_PIN_PB6, 1);	/* DTR0 */
-+	at91_set_gpio_output(AT91_PIN_PB7, 1);	/* RI0 */
-+	at91_set_gpio_input(AT91_PIN_PA19, 1);	/* DCD0 */
++	at91_set_gpio_output(AT91_PIN_PB6, 1);  /* DTR0 */
++	at91_set_gpio_output(AT91_PIN_PB7, 1);  /* RI0 */
++	at91_set_gpio_input(AT91_PIN_PA19, 1);  /* DCD0 */
 +	at91_set_deglitch(AT91_PIN_PA19, 1);
  }
  
  static struct resource uart1_resources[] = {
-@@ -820,6 +824,12 @@
+@@ -835,6 +838,12 @@
  {
  	at91_set_B_periph(AT91_PIN_PA5, 1);		/* TXD3 */
  	at91_set_B_periph(AT91_PIN_PA6, 0);		/* RXD3 */
-+	at91_set_B_periph(AT91_PIN_PB0, 0);		/* RTS3 */
-+	at91_set_B_periph(AT91_PIN_PB1, 0);		/* CTS3 */
-+	at91_set_gpio_output(AT91_PIN_PB29, 1);	/* DTR0 */
-+	at91_set_gpio_output(AT91_PIN_PB2, 1);	/* RI0 */
-+	at91_set_gpio_input(AT91_PIN_PA24, 1);	/* DCD0 */
++	at91_set_B_periph(AT91_PIN_PB0, 0);   /* RTS3 */
++	at91_set_B_periph(AT91_PIN_PB1, 0);   /* CTS3 */
++	at91_set_gpio_output(AT91_PIN_PB29, 1); /* DTR0 */
++	at91_set_gpio_output(AT91_PIN_PB2, 1);  /* RI0 */
++	at91_set_gpio_input(AT91_PIN_PA24, 1);  /* DCD0 */
 +	at91_set_deglitch(AT91_PIN_PA24, 1);
  }
  
  struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-diff -urN linux-2.6.19.2.old/arch/arm/mach-at91rm9200/vlink_leds.c linux-2.6.19.2/arch/arm/mach-at91rm9200/vlink_leds.c
---- linux-2.6.19.2.old/arch/arm/mach-at91rm9200/vlink_leds.c	2007-05-01 13:08:03.000000000 +0200
-+++ linux-2.6.19.2/arch/arm/mach-at91rm9200/vlink_leds.c	2007-05-09 12:58:42.000000000 +0200
-@@ -114,12 +114,6 @@
- 
- 	at91_set_gpio_input(AT91_PIN_PB8, 1);  	// JIGPRESENT
- 	at91_set_gpio_input(AT91_PIN_PB22, 1); 	// PWR_IND
--	at91_set_gpio_input(AT91_PIN_PA19, 1); 	// P1DTR
--	at91_set_gpio_input(AT91_PIN_PA24, 1); 	// P2DTR
--	at91_set_gpio_output(AT91_PIN_PB29, 1); // P2DCD
--	at91_set_gpio_output(AT91_PIN_PB2, 1); 	// P2RI
--	at91_set_gpio_output(AT91_PIN_PB6, 1);	// P1DCD
--	at91_set_gpio_output(AT91_PIN_PB7, 1);	// P1RI
- 
- 	at91_set_gpio_input(AT91_PIN_PB27, 1);	// UDB_CNX
- 	at91_set_gpio_output(AT91_PIN_PB28, 1);	// UDB_PUP