summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRafał Miłecki <rafal@milecki.pl>2017-02-02 09:27:20 +0100
committerRafał Miłecki <rafal@milecki.pl>2017-02-06 00:10:49 +0100
commit85d128f1454a546b3fb9a673bc782a3c77938ef4 (patch)
treefa5efe2cc7855a44e3443921c88a531b957ff3c3
parente48b1c2c07101a31ff416be2754df73aabb2a4cb (diff)
downloadmtk-20170518-85d128f1454a546b3fb9a673bc782a3c77938ef4.zip
mtk-20170518-85d128f1454a546b3fb9a673bc782a3c77938ef4.tar.gz
mtk-20170518-85d128f1454a546b3fb9a673bc782a3c77938ef4.tar.bz2
mac80211: brcmfmac: backport scheduled scan cleanup and chip support
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-rw-r--r--package/kernel/mac80211/patches/357-0001-brcmfmac-add-pcie-host-dongle-interface-rev6-support.patch490
-rw-r--r--package/kernel/mac80211/patches/357-0002-brcmfmac-add-support-for-43341-chip.patch39
-rw-r--r--package/kernel/mac80211/patches/357-0003-brcmfmac-move-pno-helper-functions-in-separate-sourc.patch319
-rw-r--r--package/kernel/mac80211/patches/357-0004-brcmfmac-fix-handling-ssids-in-.sched_scan_start-cal.patch221
-rw-r--r--package/kernel/mac80211/patches/357-0005-brcmfmac-change-prototype-for-brcmf_do_escan.patch58
-rw-r--r--package/kernel/mac80211/patches/357-0006-brcmfmac-make-internal-escan-more-generic.patch306
-rw-r--r--package/kernel/mac80211/patches/357-0007-brcmfmac-split-up-brcmf_pno_config-function.patch176
-rw-r--r--package/kernel/mac80211/patches/357-0008-brcmfmac-move-scheduled-scan-activation-to-pno-sourc.patch292
-rw-r--r--package/kernel/mac80211/patches/357-0009-brcmfmac-use-provided-channels-for-scheduled-scan.patch111
-rw-r--r--package/kernel/mac80211/patches/357-0010-brcmfmac-remove-restriction-from-.sched_scan_start-c.patch34
-rw-r--r--package/kernel/mac80211/patches/357-0011-brcmfmac-use-requested-scan-interval-in-scheduled-sc.patch67
-rw-r--r--package/kernel/mac80211/patches/357-0012-brcmfmac-fix-scheduled-scan-result-handling-for-newe.patch76
-rw-r--r--package/kernel/mac80211/patches/360-0001-brcmfmac-avoid-writing-channel-out-of-allocated-arra.patch6
-rw-r--r--package/kernel/mac80211/patches/360-0002-brcmfmac-don-t-preset-all-channels-as-disabled.patch4
-rw-r--r--package/kernel/mac80211/patches/360-0003-brcmfmac-setup-wiphy-bands-after-registering-it-firs.patch4
-rw-r--r--package/kernel/mac80211/patches/841-brcmfmac-use-wiphy_read_of_freq_limits.patch4
-rw-r--r--package/kernel/mac80211/patches/861-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch2
-rw-r--r--package/kernel/mac80211/patches/862-brcmfmac-Disable-power-management.patch2
18 files changed, 2200 insertions, 11 deletions
diff --git a/package/kernel/mac80211/patches/357-0001-brcmfmac-add-pcie-host-dongle-interface-rev6-support.patch b/package/kernel/mac80211/patches/357-0001-brcmfmac-add-pcie-host-dongle-interface-rev6-support.patch
new file mode 100644
index 0000000..e093913
--- /dev/null
+++ b/package/kernel/mac80211/patches/357-0001-brcmfmac-add-pcie-host-dongle-interface-rev6-support.patch
@@ -0,0 +1,490 @@
+From be4b092cab84b2ecc01ee7f4da6a044279430b6f Mon Sep 17 00:00:00 2001
+From: Franky Lin <franky.lin@broadcom.com>
+Date: Wed, 23 Nov 2016 10:25:20 +0000
+Subject: [PATCH] brcmfmac: add pcie host dongle interface rev6 support
+
+In rev6 of pcie host dongle interface protocol, host needs to maximum
+supported ring number from dongle shared memory and set up ring buffer
+and ring indices offset accordingly.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../net/wireless/broadcom/brcm80211/brcmfmac/bus.h | 10 +-
+ .../wireless/broadcom/brcm80211/brcmfmac/msgbuf.c | 38 +++--
+ .../wireless/broadcom/brcm80211/brcmfmac/msgbuf.h | 4 +
+ .../wireless/broadcom/brcm80211/brcmfmac/pcie.c | 171 ++++++++++++---------
+ 4 files changed, 132 insertions(+), 91 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
+@@ -22,10 +22,12 @@
+ /* IDs of the 6 default common rings of msgbuf protocol */
+ #define BRCMF_H2D_MSGRING_CONTROL_SUBMIT 0
+ #define BRCMF_H2D_MSGRING_RXPOST_SUBMIT 1
++#define BRCMF_H2D_MSGRING_FLOWRING_IDSTART 2
+ #define BRCMF_D2H_MSGRING_CONTROL_COMPLETE 2
+ #define BRCMF_D2H_MSGRING_TX_COMPLETE 3
+ #define BRCMF_D2H_MSGRING_RX_COMPLETE 4
+
++
+ #define BRCMF_NROF_H2D_COMMON_MSGRINGS 2
+ #define BRCMF_NROF_D2H_COMMON_MSGRINGS 3
+ #define BRCMF_NROF_COMMON_MSGRINGS (BRCMF_NROF_H2D_COMMON_MSGRINGS + \
+@@ -95,14 +97,18 @@ struct brcmf_bus_ops {
+ * @flowrings: commonrings which are dynamically created and destroyed for data.
+ * @rx_dataoffset: if set then all rx data has this this offset.
+ * @max_rxbufpost: maximum number of buffers to post for rx.
+- * @nrof_flowrings: number of flowrings.
++ * @max_flowrings: maximum number of tx flow rings supported.
++ * @max_submissionrings: maximum number of submission rings(h2d) supported.
++ * @max_completionrings: maximum number of completion rings(d2h) supported.
+ */
+ struct brcmf_bus_msgbuf {
+ struct brcmf_commonring *commonrings[BRCMF_NROF_COMMON_MSGRINGS];
+ struct brcmf_commonring **flowrings;
+ u32 rx_dataoffset;
+ u32 max_rxbufpost;
+- u32 nrof_flowrings;
++ u16 max_flowrings;
++ u16 max_submissionrings;
++ u16 max_completionrings;
+ };
+
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
+@@ -87,11 +87,6 @@ struct msgbuf_common_hdr {
+ __le32 request_id;
+ };
+
+-struct msgbuf_buf_addr {
+- __le32 low_addr;
+- __le32 high_addr;
+-};
+-
+ struct msgbuf_ioctl_req_hdr {
+ struct msgbuf_common_hdr msg;
+ __le32 cmd;
+@@ -227,7 +222,10 @@ struct brcmf_msgbuf {
+ struct brcmf_commonring **commonrings;
+ struct brcmf_commonring **flowrings;
+ dma_addr_t *flowring_dma_handle;
+- u16 nrof_flowrings;
++
++ u16 max_flowrings;
++ u16 max_submissionrings;
++ u16 max_completionrings;
+
+ u16 rx_dataoffset;
+ u32 max_rxbufpost;
+@@ -610,7 +608,7 @@ brcmf_msgbuf_flowring_create_worker(stru
+ create->msg.request_id = 0;
+ create->tid = brcmf_flowring_tid(msgbuf->flow, flowid);
+ create->flow_ring_id = cpu_to_le16(flowid +
+- BRCMF_NROF_H2D_COMMON_MSGRINGS);
++ BRCMF_H2D_MSGRING_FLOWRING_IDSTART);
+ memcpy(create->sa, work->sa, ETH_ALEN);
+ memcpy(create->da, work->da, ETH_ALEN);
+ address = (u64)msgbuf->flowring_dma_handle[flowid];
+@@ -760,7 +758,7 @@ static void brcmf_msgbuf_txflow_worker(s
+ u32 flowid;
+
+ msgbuf = container_of(worker, struct brcmf_msgbuf, txflow_work);
+- for_each_set_bit(flowid, msgbuf->flow_map, msgbuf->nrof_flowrings) {
++ for_each_set_bit(flowid, msgbuf->flow_map, msgbuf->max_flowrings) {
+ clear_bit(flowid, msgbuf->flow_map);
+ brcmf_msgbuf_txflow(msgbuf, flowid);
+ }
+@@ -866,7 +864,7 @@ brcmf_msgbuf_process_txstatus(struct brc
+ tx_status = (struct msgbuf_tx_status *)buf;
+ idx = le32_to_cpu(tx_status->msg.request_id);
+ flowid = le16_to_cpu(tx_status->compl_hdr.flow_ring_id);
+- flowid -= BRCMF_NROF_H2D_COMMON_MSGRINGS;
++ flowid -= BRCMF_H2D_MSGRING_FLOWRING_IDSTART;
+ skb = brcmf_msgbuf_get_pktid(msgbuf->drvr->bus_if->dev,
+ msgbuf->tx_pktids, idx);
+ if (!skb)
+@@ -1174,7 +1172,7 @@ brcmf_msgbuf_process_flow_ring_create_re
+ flowring_create_resp = (struct msgbuf_flowring_create_resp *)buf;
+
+ flowid = le16_to_cpu(flowring_create_resp->compl_hdr.flow_ring_id);
+- flowid -= BRCMF_NROF_H2D_COMMON_MSGRINGS;
++ flowid -= BRCMF_H2D_MSGRING_FLOWRING_IDSTART;
+ status = le16_to_cpu(flowring_create_resp->compl_hdr.status);
+
+ if (status) {
+@@ -1202,7 +1200,7 @@ brcmf_msgbuf_process_flow_ring_delete_re
+ flowring_delete_resp = (struct msgbuf_flowring_delete_resp *)buf;
+
+ flowid = le16_to_cpu(flowring_delete_resp->compl_hdr.flow_ring_id);
+- flowid -= BRCMF_NROF_H2D_COMMON_MSGRINGS;
++ flowid -= BRCMF_H2D_MSGRING_FLOWRING_IDSTART;
+ status = le16_to_cpu(flowring_delete_resp->compl_hdr.status);
+
+ if (status) {
+@@ -1307,7 +1305,7 @@ int brcmf_proto_msgbuf_rx_trigger(struct
+ brcmf_msgbuf_process_rx(msgbuf, buf);
+
+ for_each_set_bit(flowid, msgbuf->txstatus_done_map,
+- msgbuf->nrof_flowrings) {
++ msgbuf->max_flowrings) {
+ clear_bit(flowid, msgbuf->txstatus_done_map);
+ commonring = msgbuf->flowrings[flowid];
+ qlen = brcmf_flowring_qlen(msgbuf->flow, flowid);
+@@ -1349,7 +1347,7 @@ void brcmf_msgbuf_delete_flowring(struct
+ delete->msg.request_id = 0;
+
+ delete->flow_ring_id = cpu_to_le16(flowid +
+- BRCMF_NROF_H2D_COMMON_MSGRINGS);
++ BRCMF_H2D_MSGRING_FLOWRING_IDSTART);
+ delete->reason = 0;
+
+ brcmf_dbg(MSGBUF, "Send Flow Delete Req flow ID %d, ifindex %d\n",
+@@ -1427,10 +1425,10 @@ int brcmf_proto_msgbuf_attach(struct brc
+
+ if_msgbuf = drvr->bus_if->msgbuf;
+
+- if (if_msgbuf->nrof_flowrings >= BRCMF_FLOWRING_HASHSIZE) {
++ if (if_msgbuf->max_flowrings >= BRCMF_FLOWRING_HASHSIZE) {
+ brcmf_err("driver not configured for this many flowrings %d\n",
+- if_msgbuf->nrof_flowrings);
+- if_msgbuf->nrof_flowrings = BRCMF_FLOWRING_HASHSIZE - 1;
++ if_msgbuf->max_flowrings);
++ if_msgbuf->max_flowrings = BRCMF_FLOWRING_HASHSIZE - 1;
+ }
+
+ msgbuf = kzalloc(sizeof(*msgbuf), GFP_KERNEL);
+@@ -1443,7 +1441,7 @@ int brcmf_proto_msgbuf_attach(struct brc
+ goto fail;
+ }
+ INIT_WORK(&msgbuf->txflow_work, brcmf_msgbuf_txflow_worker);
+- count = BITS_TO_LONGS(if_msgbuf->nrof_flowrings);
++ count = BITS_TO_LONGS(if_msgbuf->max_flowrings);
+ count = count * sizeof(unsigned long);
+ msgbuf->flow_map = kzalloc(count, GFP_KERNEL);
+ if (!msgbuf->flow_map)
+@@ -1479,8 +1477,8 @@ int brcmf_proto_msgbuf_attach(struct brc
+ msgbuf->commonrings =
+ (struct brcmf_commonring **)if_msgbuf->commonrings;
+ msgbuf->flowrings = (struct brcmf_commonring **)if_msgbuf->flowrings;
+- msgbuf->nrof_flowrings = if_msgbuf->nrof_flowrings;
+- msgbuf->flowring_dma_handle = kzalloc(msgbuf->nrof_flowrings *
++ msgbuf->max_flowrings = if_msgbuf->max_flowrings;
++ msgbuf->flowring_dma_handle = kzalloc(msgbuf->max_flowrings *
+ sizeof(*msgbuf->flowring_dma_handle), GFP_KERNEL);
+ if (!msgbuf->flowring_dma_handle)
+ goto fail;
+@@ -1501,7 +1499,7 @@ int brcmf_proto_msgbuf_attach(struct brc
+ goto fail;
+
+ msgbuf->flow = brcmf_flowring_attach(drvr->bus_if->dev,
+- if_msgbuf->nrof_flowrings);
++ if_msgbuf->max_flowrings);
+ if (!msgbuf->flow)
+ goto fail;
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.h
+@@ -31,6 +31,10 @@
+ #define BRCMF_D2H_MSGRING_RX_COMPLETE_ITEMSIZE 32
+ #define BRCMF_H2D_TXFLOWRING_ITEMSIZE 48
+
++struct msgbuf_buf_addr {
++ __le32 low_addr;
++ __le32 high_addr;
++};
+
+ int brcmf_proto_msgbuf_rx_trigger(struct device *dev);
+ void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u16 flowid);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+@@ -135,7 +135,7 @@ static struct brcmf_firmware_mapping brc
+ BRCMF_PCIE_MB_INT_D2H3_DB1)
+
+ #define BRCMF_PCIE_MIN_SHARED_VERSION 5
+-#define BRCMF_PCIE_MAX_SHARED_VERSION 5
++#define BRCMF_PCIE_MAX_SHARED_VERSION 6
+ #define BRCMF_PCIE_SHARED_VERSION_MASK 0x00FF
+ #define BRCMF_PCIE_SHARED_DMA_INDEX 0x10000
+ #define BRCMF_PCIE_SHARED_DMA_2B_IDX 0x100000
+@@ -166,17 +166,6 @@ static struct brcmf_firmware_mapping brc
+ #define BRCMF_RING_MEM_SZ 16
+ #define BRCMF_RING_STATE_SZ 8
+
+-#define BRCMF_SHARED_RING_H2D_W_IDX_PTR_OFFSET 4
+-#define BRCMF_SHARED_RING_H2D_R_IDX_PTR_OFFSET 8
+-#define BRCMF_SHARED_RING_D2H_W_IDX_PTR_OFFSET 12
+-#define BRCMF_SHARED_RING_D2H_R_IDX_PTR_OFFSET 16
+-#define BRCMF_SHARED_RING_H2D_WP_HADDR_OFFSET 20
+-#define BRCMF_SHARED_RING_H2D_RP_HADDR_OFFSET 28
+-#define BRCMF_SHARED_RING_D2H_WP_HADDR_OFFSET 36
+-#define BRCMF_SHARED_RING_D2H_RP_HADDR_OFFSET 44
+-#define BRCMF_SHARED_RING_TCM_MEMLOC_OFFSET 0
+-#define BRCMF_SHARED_RING_MAX_SUB_QUEUES 52
+-
+ #define BRCMF_DEF_MAX_RXBUFPOST 255
+
+ #define BRCMF_CONSOLE_BUFADDR_OFFSET 8
+@@ -231,7 +220,9 @@ struct brcmf_pcie_shared_info {
+ struct brcmf_pcie_ringbuf *commonrings[BRCMF_NROF_COMMON_MSGRINGS];
+ struct brcmf_pcie_ringbuf *flowrings;
+ u16 max_rxbufpost;
+- u32 nrof_flowrings;
++ u16 max_flowrings;
++ u16 max_submissionrings;
++ u16 max_completionrings;
+ u32 rx_dataoffset;
+ u32 htod_mb_data_addr;
+ u32 dtoh_mb_data_addr;
+@@ -241,6 +232,7 @@ struct brcmf_pcie_shared_info {
+ dma_addr_t scratch_dmahandle;
+ void *ringupd;
+ dma_addr_t ringupd_dmahandle;
++ u8 version;
+ };
+
+ struct brcmf_pcie_core_info {
+@@ -284,6 +276,36 @@ struct brcmf_pcie_ringbuf {
+ u8 id;
+ };
+
++/**
++ * struct brcmf_pcie_dhi_ringinfo - dongle/host interface shared ring info
++ *
++ * @ringmem: dongle memory pointer to ring memory location
++ * @h2d_w_idx_ptr: h2d ring write indices dongle memory pointers
++ * @h2d_r_idx_ptr: h2d ring read indices dongle memory pointers
++ * @d2h_w_idx_ptr: d2h ring write indices dongle memory pointers
++ * @d2h_r_idx_ptr: d2h ring read indices dongle memory pointers
++ * @h2d_w_idx_hostaddr: h2d ring write indices host memory pointers
++ * @h2d_r_idx_hostaddr: h2d ring read indices host memory pointers
++ * @d2h_w_idx_hostaddr: d2h ring write indices host memory pointers
++ * @d2h_r_idx_hostaddr: d2h ring reaD indices host memory pointers
++ * @max_flowrings: maximum number of tx flow rings supported.
++ * @max_submissionrings: maximum number of submission rings(h2d) supported.
++ * @max_completionrings: maximum number of completion rings(d2h) supported.
++ */
++struct brcmf_pcie_dhi_ringinfo {
++ __le32 ringmem;
++ __le32 h2d_w_idx_ptr;
++ __le32 h2d_r_idx_ptr;
++ __le32 d2h_w_idx_ptr;
++ __le32 d2h_r_idx_ptr;
++ struct msgbuf_buf_addr h2d_w_idx_hostaddr;
++ struct msgbuf_buf_addr h2d_r_idx_hostaddr;
++ struct msgbuf_buf_addr d2h_w_idx_hostaddr;
++ struct msgbuf_buf_addr d2h_r_idx_hostaddr;
++ __le16 max_flowrings;
++ __le16 max_submissionrings;
++ __le16 max_completionrings;
++};
+
+ static const u32 brcmf_ring_max_item[BRCMF_NROF_COMMON_MSGRINGS] = {
+ BRCMF_H2D_MSGRING_CONTROL_SUBMIT_MAX_ITEM,
+@@ -1054,26 +1076,35 @@ static int brcmf_pcie_init_ringbuffers(s
+ {
+ struct brcmf_pcie_ringbuf *ring;
+ struct brcmf_pcie_ringbuf *rings;
+- u32 ring_addr;
+ u32 d2h_w_idx_ptr;
+ u32 d2h_r_idx_ptr;
+ u32 h2d_w_idx_ptr;
+ u32 h2d_r_idx_ptr;
+- u32 addr;
+ u32 ring_mem_ptr;
+ u32 i;
+ u64 address;
+ u32 bufsz;
+- u16 max_sub_queues;
+ u8 idx_offset;
+-
+- ring_addr = devinfo->shared.ring_info_addr;
+- brcmf_dbg(PCIE, "Base ring addr = 0x%08x\n", ring_addr);
+- addr = ring_addr + BRCMF_SHARED_RING_MAX_SUB_QUEUES;
+- max_sub_queues = brcmf_pcie_read_tcm16(devinfo, addr);
++ struct brcmf_pcie_dhi_ringinfo ringinfo;
++ u16 max_flowrings;
++ u16 max_submissionrings;
++ u16 max_completionrings;
++
++ memcpy_fromio(&ringinfo, devinfo->tcm + devinfo->shared.ring_info_addr,
++ sizeof(ringinfo));
++ if (devinfo->shared.version >= 6) {
++ max_submissionrings = le16_to_cpu(ringinfo.max_submissionrings);
++ max_flowrings = le16_to_cpu(ringinfo.max_flowrings);
++ max_completionrings = le16_to_cpu(ringinfo.max_completionrings);
++ } else {
++ max_submissionrings = le16_to_cpu(ringinfo.max_flowrings);
++ max_flowrings = max_submissionrings -
++ BRCMF_NROF_H2D_COMMON_MSGRINGS;
++ max_completionrings = BRCMF_NROF_D2H_COMMON_MSGRINGS;
++ }
+
+ if (devinfo->dma_idx_sz != 0) {
+- bufsz = (BRCMF_NROF_D2H_COMMON_MSGRINGS + max_sub_queues) *
++ bufsz = (max_submissionrings + max_completionrings) *
+ devinfo->dma_idx_sz * 2;
+ devinfo->idxbuf = dma_alloc_coherent(&devinfo->pdev->dev, bufsz,
+ &devinfo->idxbuf_dmahandle,
+@@ -1083,14 +1114,10 @@ static int brcmf_pcie_init_ringbuffers(s
+ }
+
+ if (devinfo->dma_idx_sz == 0) {
+- addr = ring_addr + BRCMF_SHARED_RING_D2H_W_IDX_PTR_OFFSET;
+- d2h_w_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
+- addr = ring_addr + BRCMF_SHARED_RING_D2H_R_IDX_PTR_OFFSET;
+- d2h_r_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
+- addr = ring_addr + BRCMF_SHARED_RING_H2D_W_IDX_PTR_OFFSET;
+- h2d_w_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
+- addr = ring_addr + BRCMF_SHARED_RING_H2D_R_IDX_PTR_OFFSET;
+- h2d_r_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
++ d2h_w_idx_ptr = le32_to_cpu(ringinfo.d2h_w_idx_ptr);
++ d2h_r_idx_ptr = le32_to_cpu(ringinfo.d2h_r_idx_ptr);
++ h2d_w_idx_ptr = le32_to_cpu(ringinfo.h2d_w_idx_ptr);
++ h2d_r_idx_ptr = le32_to_cpu(ringinfo.h2d_r_idx_ptr);
+ idx_offset = sizeof(u32);
+ devinfo->write_ptr = brcmf_pcie_write_tcm16;
+ devinfo->read_ptr = brcmf_pcie_read_tcm16;
+@@ -1103,34 +1130,42 @@ static int brcmf_pcie_init_ringbuffers(s
+ devinfo->read_ptr = brcmf_pcie_read_idx;
+
+ h2d_w_idx_ptr = 0;
+- addr = ring_addr + BRCMF_SHARED_RING_H2D_WP_HADDR_OFFSET;
+ address = (u64)devinfo->idxbuf_dmahandle;
+- brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff);
+- brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32);
+-
+- h2d_r_idx_ptr = h2d_w_idx_ptr + max_sub_queues * idx_offset;
+- addr = ring_addr + BRCMF_SHARED_RING_H2D_RP_HADDR_OFFSET;
+- address += max_sub_queues * idx_offset;
+- brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff);
+- brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32);
+-
+- d2h_w_idx_ptr = h2d_r_idx_ptr + max_sub_queues * idx_offset;
+- addr = ring_addr + BRCMF_SHARED_RING_D2H_WP_HADDR_OFFSET;
+- address += max_sub_queues * idx_offset;
+- brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff);
+- brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32);
++ ringinfo.h2d_w_idx_hostaddr.low_addr =
++ cpu_to_le32(address & 0xffffffff);
++ ringinfo.h2d_w_idx_hostaddr.high_addr =
++ cpu_to_le32(address >> 32);
++
++ h2d_r_idx_ptr = h2d_w_idx_ptr +
++ max_submissionrings * idx_offset;
++ address += max_submissionrings * idx_offset;
++ ringinfo.h2d_r_idx_hostaddr.low_addr =
++ cpu_to_le32(address & 0xffffffff);
++ ringinfo.h2d_r_idx_hostaddr.high_addr =
++ cpu_to_le32(address >> 32);
++
++ d2h_w_idx_ptr = h2d_r_idx_ptr +
++ max_submissionrings * idx_offset;
++ address += max_submissionrings * idx_offset;
++ ringinfo.d2h_w_idx_hostaddr.low_addr =
++ cpu_to_le32(address & 0xffffffff);
++ ringinfo.d2h_w_idx_hostaddr.high_addr =
++ cpu_to_le32(address >> 32);
+
+ d2h_r_idx_ptr = d2h_w_idx_ptr +
+- BRCMF_NROF_D2H_COMMON_MSGRINGS * idx_offset;
+- addr = ring_addr + BRCMF_SHARED_RING_D2H_RP_HADDR_OFFSET;
+- address += BRCMF_NROF_D2H_COMMON_MSGRINGS * idx_offset;
+- brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff);
+- brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32);
++ max_completionrings * idx_offset;
++ address += max_completionrings * idx_offset;
++ ringinfo.d2h_r_idx_hostaddr.low_addr =
++ cpu_to_le32(address & 0xffffffff);
++ ringinfo.d2h_r_idx_hostaddr.high_addr =
++ cpu_to_le32(address >> 32);
++
++ memcpy_toio(devinfo->tcm + devinfo->shared.ring_info_addr,
++ &ringinfo, sizeof(ringinfo));
+ brcmf_dbg(PCIE, "Using host memory indices\n");
+ }
+
+- addr = ring_addr + BRCMF_SHARED_RING_TCM_MEMLOC_OFFSET;
+- ring_mem_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
++ ring_mem_ptr = le32_to_cpu(ringinfo.ringmem);
+
+ for (i = 0; i < BRCMF_NROF_H2D_COMMON_MSGRINGS; i++) {
+ ring = brcmf_pcie_alloc_dma_and_ring(devinfo, i, ring_mem_ptr);
+@@ -1161,20 +1196,19 @@ static int brcmf_pcie_init_ringbuffers(s
+ ring_mem_ptr += BRCMF_RING_MEM_SZ;
+ }
+
+- devinfo->shared.nrof_flowrings =
+- max_sub_queues - BRCMF_NROF_H2D_COMMON_MSGRINGS;
+- rings = kcalloc(devinfo->shared.nrof_flowrings, sizeof(*ring),
+- GFP_KERNEL);
++ devinfo->shared.max_flowrings = max_flowrings;
++ devinfo->shared.max_submissionrings = max_submissionrings;
++ devinfo->shared.max_completionrings = max_completionrings;
++ rings = kcalloc(max_flowrings, sizeof(*ring), GFP_KERNEL);
+ if (!rings)
+ goto fail;
+
+- brcmf_dbg(PCIE, "Nr of flowrings is %d\n",
+- devinfo->shared.nrof_flowrings);
++ brcmf_dbg(PCIE, "Nr of flowrings is %d\n", max_flowrings);
+
+- for (i = 0; i < devinfo->shared.nrof_flowrings; i++) {
++ for (i = 0; i < max_flowrings; i++) {
+ ring = &rings[i];
+ ring->devinfo = devinfo;
+- ring->id = i + BRCMF_NROF_COMMON_MSGRINGS;
++ ring->id = i + BRCMF_H2D_MSGRING_FLOWRING_IDSTART;
+ brcmf_commonring_register_cb(&ring->commonring,
+ brcmf_pcie_ring_mb_ring_bell,
+ brcmf_pcie_ring_mb_update_rptr,
+@@ -1357,17 +1391,16 @@ brcmf_pcie_init_share_ram_info(struct br
+ {
+ struct brcmf_pcie_shared_info *shared;
+ u32 addr;
+- u32 version;
+
+ shared = &devinfo->shared;
+ shared->tcm_base_address = sharedram_addr;
+
+ shared->flags = brcmf_pcie_read_tcm32(devinfo, sharedram_addr);
+- version = shared->flags & BRCMF_PCIE_SHARED_VERSION_MASK;
+- brcmf_dbg(PCIE, "PCIe protocol version %d\n", version);
+- if ((version > BRCMF_PCIE_MAX_SHARED_VERSION) ||
+- (version < BRCMF_PCIE_MIN_SHARED_VERSION)) {
+- brcmf_err("Unsupported PCIE version %d\n", version);
++ shared->version = (u8)(shared->flags & BRCMF_PCIE_SHARED_VERSION_MASK);
++ brcmf_dbg(PCIE, "PCIe protocol version %d\n", shared->version);
++ if ((shared->version > BRCMF_PCIE_MAX_SHARED_VERSION) ||
++ (shared->version < BRCMF_PCIE_MIN_SHARED_VERSION)) {
++ brcmf_err("Unsupported PCIE version %d\n", shared->version);
+ return -EINVAL;
+ }
+
+@@ -1661,18 +1694,18 @@ static void brcmf_pcie_setup(struct devi
+ bus->msgbuf->commonrings[i] =
+ &devinfo->shared.commonrings[i]->commonring;
+
+- flowrings = kcalloc(devinfo->shared.nrof_flowrings, sizeof(*flowrings),
++ flowrings = kcalloc(devinfo->shared.max_flowrings, sizeof(*flowrings),
+ GFP_KERNEL);
+ if (!flowrings)
+ goto fail;
+
+- for (i = 0; i < devinfo->shared.nrof_flowrings; i++)
++ for (i = 0; i < devinfo->shared.max_flowrings; i++)
+ flowrings[i] = &devinfo->shared.flowrings[i].commonring;
+ bus->msgbuf->flowrings = flowrings;
+
+ bus->msgbuf->rx_dataoffset = devinfo->shared.rx_dataoffset;
+ bus->msgbuf->max_rxbufpost = devinfo->shared.max_rxbufpost;
+- bus->msgbuf->nrof_flowrings = devinfo->shared.nrof_flowrings;
++ bus->msgbuf->max_flowrings = devinfo->shared.max_flowrings;
+
+ init_waitqueue_head(&devinfo->mbdata_resp_wait);
+
diff --git a/package/kernel/mac80211/patches/357-0002-brcmfmac-add-support-for-43341-chip.patch b/package/kernel/mac80211/patches/357-0002-brcmfmac-add-support-for-43341-chip.patch
new file mode 100644
index 0000000..edd7de3
--- /dev/null
+++ b/package/kernel/mac80211/patches/357-0002-brcmfmac-add-support-for-43341-chip.patch
@@ -0,0 +1,39 @@
+From dc630dc5c753ccba97ce174f9c2894f802f9bd93 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Wed, 23 Nov 2016 10:25:21 +0000
+Subject: [PATCH] brcmfmac: add support for 43341 chip
+
+This chip was already supported, but seems a device came up giving
+a different chip identifier. So adding that effectively mapping to
+the same firmware file as for 43340 chip.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 1 +
+ drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h | 1 +
+ 2 files changed, 2 insertions(+)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+@@ -621,6 +621,7 @@ static struct brcmf_firmware_mapping brc
+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4330_CHIP_ID, 0xFFFFFFFF, 4330),
+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4334_CHIP_ID, 0xFFFFFFFF, 4334),
+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43340_CHIP_ID, 0xFFFFFFFF, 43340),
++ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43341_CHIP_ID, 0xFFFFFFFF, 43340),
+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, 4335),
+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, 43362),
+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, 4339),
+--- a/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
++++ b/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
+@@ -36,6 +36,7 @@
+ #define BRCM_CC_4330_CHIP_ID 0x4330
+ #define BRCM_CC_4334_CHIP_ID 0x4334
+ #define BRCM_CC_43340_CHIP_ID 43340
++#define BRCM_CC_43341_CHIP_ID 43341
+ #define BRCM_CC_43362_CHIP_ID 43362
+ #define BRCM_CC_4335_CHIP_ID 0x4335
+ #define BRCM_CC_4339_CHIP_ID 0x4339
diff --git a/package/kernel/mac80211/patches/357-0003-brcmfmac-move-pno-helper-functions-in-separate-sourc.patch b/package/kernel/mac80211/patches/357-0003-brcmfmac-move-pno-helper-functions-in-separate-sourc.patch
new file mode 100644
index 0000000..94f2e6b
--- /dev/null
+++ b/package/kernel/mac80211/patches/357-0003-brcmfmac-move-pno-helper-functions-in-separate-sourc.patch
@@ -0,0 +1,319 @@
+From ac55136f43d3336c7b40238b779c404008229929 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Wed, 23 Nov 2016 10:25:22 +0000
+Subject: [PATCH] brcmfmac: move pno helper functions in separate source file
+
+Introducing new source file for pno related functionality. Moving
+existing pno functions.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../wireless/broadcom/brcm80211/brcmfmac/Makefile | 3 +-
+ .../broadcom/brcm80211/brcmfmac/cfg80211.c | 93 ++-----------------
+ .../net/wireless/broadcom/brcm80211/brcmfmac/pno.c | 100 +++++++++++++++++++++
+ .../net/wireless/broadcom/brcm80211/brcmfmac/pno.h | 40 +++++++++
+ 4 files changed, 150 insertions(+), 86 deletions(-)
+ create mode 100644 drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
+ create mode 100644 drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/Makefile
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/Makefile
+@@ -35,7 +35,8 @@ brcmfmac-objs += \
+ firmware.o \
+ feature.o \
+ btcoex.o \
+- vendor.o
++ vendor.o \
++ pno.o
+ brcmfmac-$(CPTCFG_BRCMFMAC_PROTO_BCDC) += \
+ bcdc.o
+ brcmfmac-$(CPTCFG_BRCMFMAC_PROTO_MSGBUF) += \
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -32,6 +32,7 @@
+ #include "fwil_types.h"
+ #include "p2p.h"
+ #include "btcoex.h"
++#include "pno.h"
+ #include "cfg80211.h"
+ #include "feature.h"
+ #include "fwil.h"
+@@ -41,16 +42,6 @@
+ #include "common.h"
+
+ #define BRCMF_SCAN_IE_LEN_MAX 2048
+-#define BRCMF_PNO_VERSION 2
+-#define BRCMF_PNO_TIME 30
+-#define BRCMF_PNO_REPEAT 4
+-#define BRCMF_PNO_FREQ_EXPO_MAX 3
+-#define BRCMF_PNO_MAX_PFN_COUNT 16
+-#define BRCMF_PNO_ENABLE_ADAPTSCAN_BIT 6
+-#define BRCMF_PNO_HIDDEN_BIT 2
+-#define BRCMF_PNO_WPA_AUTH_ANY 0xFFFFFFFF
+-#define BRCMF_PNO_SCAN_COMPLETE 1
+-#define BRCMF_PNO_SCAN_INCOMPLETE 0
+
+ #define WPA_OUI "\x00\x50\xF2" /* WPA OUI */
+ #define WPA_OUI_TYPE 1
+@@ -3323,76 +3314,6 @@ out_err:
+ return err;
+ }
+
+-static int brcmf_dev_pno_clean(struct net_device *ndev)
+-{
+- int ret;
+-
+- /* Disable pfn */
+- ret = brcmf_fil_iovar_int_set(netdev_priv(ndev), "pfn", 0);
+- if (ret == 0) {
+- /* clear pfn */
+- ret = brcmf_fil_iovar_data_set(netdev_priv(ndev), "pfnclear",
+- NULL, 0);
+- }
+- if (ret < 0)
+- brcmf_err("failed code %d\n", ret);
+-
+- return ret;
+-}
+-
+-static int brcmf_dev_pno_config(struct brcmf_if *ifp,
+- struct cfg80211_sched_scan_request *request)
+-{
+- struct brcmf_pno_param_le pfn_param;
+- struct brcmf_pno_macaddr_le pfn_mac;
+- s32 err;
+- u8 *mac_mask;
+- int i;
+-
+- memset(&pfn_param, 0, sizeof(pfn_param));
+- pfn_param.version = cpu_to_le32(BRCMF_PNO_VERSION);
+-
+- /* set extra pno params */
+- pfn_param.flags = cpu_to_le16(1 << BRCMF_PNO_ENABLE_ADAPTSCAN_BIT);
+- pfn_param.repeat = BRCMF_PNO_REPEAT;
+- pfn_param.exp = BRCMF_PNO_FREQ_EXPO_MAX;
+-
+- /* set up pno scan fr */
+- pfn_param.scan_freq = cpu_to_le32(BRCMF_PNO_TIME);
+-
+- err = brcmf_fil_iovar_data_set(ifp, "pfn_set", &pfn_param,
+- sizeof(pfn_param));
+- if (err) {
+- brcmf_err("pfn_set failed, err=%d\n", err);
+- return err;
+- }
+-
+- /* Find out if mac randomization should be turned on */
+- if (!(request->flags & NL80211_SCAN_FLAG_RANDOM_ADDR))
+- return 0;
+-
+- pfn_mac.version = BRCMF_PFN_MACADDR_CFG_VER;
+- pfn_mac.flags = BRCMF_PFN_MAC_OUI_ONLY | BRCMF_PFN_SET_MAC_UNASSOC;
+-
+- memcpy(pfn_mac.mac, request->mac_addr, ETH_ALEN);
+- mac_mask = request->mac_addr_mask;
+- for (i = 0; i < ETH_ALEN; i++) {
+- pfn_mac.mac[i] &= mac_mask[i];
+- pfn_mac.mac[i] |= get_random_int() & ~(mac_mask[i]);
+- }
+- /* Clear multi bit */
+- pfn_mac.mac[0] &= 0xFE;
+- /* Set locally administered */
+- pfn_mac.mac[0] |= 0x02;
+-
+- err = brcmf_fil_iovar_data_set(ifp, "pfn_macaddr", &pfn_mac,
+- sizeof(pfn_mac));
+- if (err)
+- brcmf_err("pfn_macaddr failed, err=%d\n", err);
+-
+- return err;
+-}
+-
+ static int
+ brcmf_cfg80211_sched_scan_start(struct wiphy *wiphy,
+ struct net_device *ndev,
+@@ -3436,15 +3357,16 @@ brcmf_cfg80211_sched_scan_start(struct w
+
+ if (request->n_match_sets > 0) {
+ /* clean up everything */
+- ret = brcmf_dev_pno_clean(ndev);
++ ret = brcmf_pno_clean(ifp);
+ if (ret < 0) {
+ brcmf_err("failed error=%d\n", ret);
+ return ret;
+ }
+
+ /* configure pno */
+- if (brcmf_dev_pno_config(ifp, request))
+- return -EINVAL;
++ ret = brcmf_pno_config(ifp, request);
++ if (ret < 0)
++ return ret;
+
+ /* configure each match set */
+ for (i = 0; i < request->n_match_sets; i++) {
+@@ -3486,11 +3408,12 @@ static int brcmf_cfg80211_sched_scan_sto
+ struct net_device *ndev)
+ {
+ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
++ struct brcmf_if *ifp = netdev_priv(ndev);
+
+ brcmf_dbg(SCAN, "enter\n");
+- brcmf_dev_pno_clean(ndev);
++ brcmf_pno_clean(ifp);
+ if (cfg->sched_escan)
+- brcmf_notify_escan_complete(cfg, netdev_priv(ndev), true, true);
++ brcmf_notify_escan_complete(cfg, ifp, true, true);
+ return 0;
+ }
+
+--- /dev/null
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
+@@ -0,0 +1,100 @@
++/*
++ * Copyright (c) 2016 Broadcom
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
++ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
++ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
++ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++#include <linux/netdevice.h>
++#include <net/cfg80211.h>
++
++#include "core.h"
++#include "debug.h"
++#include "pno.h"
++#include "fwil.h"
++#include "fwil_types.h"
++
++#define BRCMF_PNO_VERSION 2
++#define BRCMF_PNO_TIME 30
++#define BRCMF_PNO_REPEAT 4
++#define BRCMF_PNO_FREQ_EXPO_MAX 3
++#define BRCMF_PNO_ENABLE_ADAPTSCAN_BIT 6
++#define BRCMF_PNO_SCAN_INCOMPLETE 0
++
++int brcmf_pno_clean(struct brcmf_if *ifp)
++{
++ int ret;
++
++ /* Disable pfn */
++ ret = brcmf_fil_iovar_int_set(ifp, "pfn", 0);
++ if (ret == 0) {
++ /* clear pfn */
++ ret = brcmf_fil_iovar_data_set(ifp, "pfnclear", NULL, 0);
++ }
++ if (ret < 0)
++ brcmf_err("failed code %d\n", ret);
++
++ return ret;
++}
++
++int brcmf_pno_config(struct brcmf_if *ifp,
++ struct cfg80211_sched_scan_request *request)
++{
++ struct brcmf_pno_param_le pfn_param;
++ struct brcmf_pno_macaddr_le pfn_mac;
++ s32 err;
++ u8 *mac_mask;
++ int i;
++
++ memset(&pfn_param, 0, sizeof(pfn_param));
++ pfn_param.version = cpu_to_le32(BRCMF_PNO_VERSION);
++
++ /* set extra pno params */
++ pfn_param.flags = cpu_to_le16(1 << BRCMF_PNO_ENABLE_ADAPTSCAN_BIT);
++ pfn_param.repeat = BRCMF_PNO_REPEAT;
++ pfn_param.exp = BRCMF_PNO_FREQ_EXPO_MAX;
++
++ /* set up pno scan fr */
++ pfn_param.scan_freq = cpu_to_le32(BRCMF_PNO_TIME);
++
++ err = brcmf_fil_iovar_data_set(ifp, "pfn_set", &pfn_param,
++ sizeof(pfn_param));
++ if (err) {
++ brcmf_err("pfn_set failed, err=%d\n", err);
++ return err;
++ }
++
++ /* Find out if mac randomization should be turned on */
++ if (!(request->flags & NL80211_SCAN_FLAG_RANDOM_ADDR))
++ return 0;
++
++ pfn_mac.version = BRCMF_PFN_MACADDR_CFG_VER;
++ pfn_mac.flags = BRCMF_PFN_MAC_OUI_ONLY | BRCMF_PFN_SET_MAC_UNASSOC;
++
++ memcpy(pfn_mac.mac, request->mac_addr, ETH_ALEN);
++ mac_mask = request->mac_addr_mask;
++ for (i = 0; i < ETH_ALEN; i++) {
++ pfn_mac.mac[i] &= mac_mask[i];
++ pfn_mac.mac[i] |= get_random_int() & ~(mac_mask[i]);
++ }
++ /* Clear multi bit */
++ pfn_mac.mac[0] &= 0xFE;
++ /* Set locally administered */
++ pfn_mac.mac[0] |= 0x02;
++
++ err = brcmf_fil_iovar_data_set(ifp, "pfn_macaddr", &pfn_mac,
++ sizeof(pfn_mac));
++ if (err)
++ brcmf_err("pfn_macaddr failed, err=%d\n", err);
++
++ return err;
++}
++
+--- /dev/null
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
+@@ -0,0 +1,40 @@
++/*
++ * Copyright (c) 2016 Broadcom
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
++ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
++ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
++ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++#ifndef _BRCMF_PNO_H
++#define _BRCMF_PNO_H
++
++#define BRCMF_PNO_SCAN_COMPLETE 1
++#define BRCMF_PNO_WPA_AUTH_ANY 0xFFFFFFFF
++#define BRCMF_PNO_HIDDEN_BIT 2
++#define BRCMF_PNO_MAX_PFN_COUNT 16
++
++/**
++ * brcmf_pno_clean - disable and clear pno in firmware.
++ *
++ * @ifp: interface object used.
++ */
++int brcmf_pno_clean(struct brcmf_if *ifp);
++
++/**
++ * brcmf_pno_config - configure pno parameters.
++ *
++ * @ifp: interface object used.
++ * @request: scheduled scan parameters.
++ */
++int brcmf_pno_config(struct brcmf_if *ifp,
++ struct cfg80211_sched_scan_request *request);
++
++#endif /* _BRCMF_PNO_H */
diff --git a/package/kernel/mac80211/patches/357-0004-brcmfmac-fix-handling-ssids-in-.sched_scan_start-cal.patch b/package/kernel/mac80211/patches/357-0004-brcmfmac-fix-handling-ssids-in-.sched_scan_start-cal.patch
new file mode 100644
index 0000000..f1934af
--- /dev/null
+++ b/package/kernel/mac80211/patches/357-0004-brcmfmac-fix-handling-ssids-in-.sched_scan_start-cal.patch
@@ -0,0 +1,221 @@
+From 3e2e86ab19c2a43953de30089c5411c580ddb5f7 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Wed, 23 Nov 2016 10:25:23 +0000
+Subject: [PATCH] brcmfmac: fix handling ssids in .sched_scan_start() callback
+
+The ssids list in the scheduled scan request were not properly taken
+into account when configuring in firmware. The hidden bit was set for
+any ssid resulting in active scanning for all. Only set it for ssids
+that are in the ssids list.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../broadcom/brcm80211/brcmfmac/cfg80211.c | 103 ++++++++++-----------
+ .../net/wireless/broadcom/brcm80211/brcmfmac/pno.c | 18 ++++
+ .../net/wireless/broadcom/brcm80211/brcmfmac/pno.h | 12 ++-
+ 3 files changed, 76 insertions(+), 57 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -3314,19 +3314,37 @@ out_err:
+ return err;
+ }
+
++static bool brcmf_is_ssid_active(struct cfg80211_ssid *ssid,
++ struct cfg80211_sched_scan_request *req)
++{
++ int i;
++
++ if (!ssid || !req->ssids || !req->n_ssids)
++ return false;
++
++ for (i = 0; i < req->n_ssids; i++) {
++ if (ssid->ssid_len == req->ssids[i].ssid_len) {
++ if (!strncmp(ssid->ssid, req->ssids[i].ssid,
++ ssid->ssid_len))
++ return true;
++ }
++ }
++ return false;
++}
++
+ static int
+ brcmf_cfg80211_sched_scan_start(struct wiphy *wiphy,
+ struct net_device *ndev,
+- struct cfg80211_sched_scan_request *request)
++ struct cfg80211_sched_scan_request *req)
+ {
+ struct brcmf_if *ifp = netdev_priv(ndev);
+ struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy);
+- struct brcmf_pno_net_param_le pfn;
++ struct cfg80211_ssid *ssid;
+ int i;
+ int ret = 0;
+
+ brcmf_dbg(SCAN, "Enter n_match_sets:%d n_ssids:%d\n",
+- request->n_match_sets, request->n_ssids);
++ req->n_match_sets, req->n_ssids);
+ if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
+ brcmf_err("Scanning already: status (%lu)\n", cfg->scan_status);
+ return -EAGAIN;
+@@ -3337,71 +3355,46 @@ brcmf_cfg80211_sched_scan_start(struct w
+ return -EAGAIN;
+ }
+
+- if (!request->n_ssids || !request->n_match_sets) {
+- brcmf_dbg(SCAN, "Invalid sched scan req!! n_ssids:%d\n",
+- request->n_ssids);
++ if (req->n_match_sets <= 0) {
++ brcmf_dbg(SCAN, "invalid number of matchsets specified: %d\n",
++ req->n_match_sets);
+ return -EINVAL;
+ }
+
+- if (request->n_ssids > 0) {
+- for (i = 0; i < request->n_ssids; i++) {
+- /* Active scan req for ssids */
+- brcmf_dbg(SCAN, ">>> Active scan req for ssid (%s)\n",
+- request->ssids[i].ssid);
+-
+- /* match_set ssids is a supert set of n_ssid list,
+- * so we need not add these set separately.
+- */
+- }
++ /* clean up everything */
++ ret = brcmf_pno_clean(ifp);
++ if (ret < 0) {
++ brcmf_err("failed error=%d\n", ret);
++ return ret;
+ }
+
+- if (request->n_match_sets > 0) {
+- /* clean up everything */
+- ret = brcmf_pno_clean(ifp);
+- if (ret < 0) {
+- brcmf_err("failed error=%d\n", ret);
+- return ret;
++ /* configure pno */
++ ret = brcmf_pno_config(ifp, req);
++ if (ret < 0)
++ return ret;
++
++ /* configure each match set */
++ for (i = 0; i < req->n_match_sets; i++) {
++
++ ssid = &req->match_sets[i].ssid;
++
++ if (!ssid->ssid_len) {
++ brcmf_err("skip broadcast ssid\n");
++ continue;
+ }
+
+- /* configure pno */
+- ret = brcmf_pno_config(ifp, request);
++ ret = brcmf_pno_add_ssid(ifp, ssid,
++ brcmf_is_ssid_active(ssid, req));
+ if (ret < 0)
+- return ret;
+-
+- /* configure each match set */
+- for (i = 0; i < request->n_match_sets; i++) {
+- struct cfg80211_ssid *ssid;
+- u32 ssid_len;
+-
+- ssid = &request->match_sets[i].ssid;
+- ssid_len = ssid->ssid_len;
+-
+- if (!ssid_len) {
+- brcmf_err("skip broadcast ssid\n");
+- continue;
+- }
+- pfn.auth = cpu_to_le32(WLAN_AUTH_OPEN);
+- pfn.wpa_auth = cpu_to_le32(BRCMF_PNO_WPA_AUTH_ANY);
+- pfn.wsec = cpu_to_le32(0);
+- pfn.infra = cpu_to_le32(1);
+- pfn.flags = cpu_to_le32(1 << BRCMF_PNO_HIDDEN_BIT);
+- pfn.ssid.SSID_len = cpu_to_le32(ssid_len);
+- memcpy(pfn.ssid.SSID, ssid->ssid, ssid_len);
+- ret = brcmf_fil_iovar_data_set(ifp, "pfn_add", &pfn,
+- sizeof(pfn));
+ brcmf_dbg(SCAN, ">>> PNO filter %s for ssid (%s)\n",
+ ret == 0 ? "set" : "failed", ssid->ssid);
+- }
+- /* Enable the PNO */
+- if (brcmf_fil_iovar_int_set(ifp, "pfn", 1) < 0) {
+- brcmf_err("PNO enable failed!! ret=%d\n", ret);
+- return -EINVAL;
+- }
+- } else {
+- return -EINVAL;
+ }
++ /* Enable the PNO */
++ ret = brcmf_fil_iovar_int_set(ifp, "pfn", 1);
++ if (ret < 0)
++ brcmf_err("PNO enable failed!! ret=%d\n", ret);
+
+- return 0;
++ return ret;
+ }
+
+ static int brcmf_cfg80211_sched_scan_stop(struct wiphy *wiphy,
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
+@@ -28,6 +28,8 @@
+ #define BRCMF_PNO_FREQ_EXPO_MAX 3
+ #define BRCMF_PNO_ENABLE_ADAPTSCAN_BIT 6
+ #define BRCMF_PNO_SCAN_INCOMPLETE 0
++#define BRCMF_PNO_WPA_AUTH_ANY 0xFFFFFFFF
++#define BRCMF_PNO_HIDDEN_BIT 2
+
+ int brcmf_pno_clean(struct brcmf_if *ifp)
+ {
+@@ -98,3 +100,19 @@ int brcmf_pno_config(struct brcmf_if *if
+ return err;
+ }
+
++int brcmf_pno_add_ssid(struct brcmf_if *ifp, struct cfg80211_ssid *ssid,
++ bool active)
++{
++ struct brcmf_pno_net_param_le pfn;
++
++ pfn.auth = cpu_to_le32(WLAN_AUTH_OPEN);
++ pfn.wpa_auth = cpu_to_le32(BRCMF_PNO_WPA_AUTH_ANY);
++ pfn.wsec = cpu_to_le32(0);
++ pfn.infra = cpu_to_le32(1);
++ if (active)
++ pfn.flags = cpu_to_le32(1 << BRCMF_PNO_HIDDEN_BIT);
++ pfn.ssid.SSID_len = cpu_to_le32(ssid->ssid_len);
++ memcpy(pfn.ssid.SSID, ssid->ssid, ssid->ssid_len);
++ return brcmf_fil_iovar_data_set(ifp, "pfn_add", &pfn, sizeof(pfn));
++}
++
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
+@@ -17,8 +17,6 @@
+ #define _BRCMF_PNO_H
+
+ #define BRCMF_PNO_SCAN_COMPLETE 1
+-#define BRCMF_PNO_WPA_AUTH_ANY 0xFFFFFFFF
+-#define BRCMF_PNO_HIDDEN_BIT 2
+ #define BRCMF_PNO_MAX_PFN_COUNT 16
+
+ /**
+@@ -37,4 +35,14 @@ int brcmf_pno_clean(struct brcmf_if *ifp
+ int brcmf_pno_config(struct brcmf_if *ifp,
+ struct cfg80211_sched_scan_request *request);
+
++/**
++ * brcmf_pno_add_ssid - add ssid for pno in firmware.
++ *
++ * @ifp: interface object used.
++ * @ssid: ssid information.
++ * @active: indicate this ssid needs to be actively probed.
++ */
++int brcmf_pno_add_ssid(struct brcmf_if *ifp, struct cfg80211_ssid *ssid,
++ bool active);
++
+ #endif /* _BRCMF_PNO_H */
diff --git a/package/kernel/mac80211/patches/357-0005-brcmfmac-change-prototype-for-brcmf_do_escan.patch b/package/kernel/mac80211/patches/357-0005-brcmfmac-change-prototype-for-brcmf_do_escan.patch
new file mode 100644
index 0000000..07b353b
--- /dev/null
+++ b/package/kernel/mac80211/patches/357-0005-brcmfmac-change-prototype-for-brcmf_do_escan.patch
@@ -0,0 +1,58 @@
+From ab5981c830339b945ddbedc314567a9e5f506d72 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Wed, 23 Nov 2016 10:25:24 +0000
+Subject: [PATCH] brcmfmac: change prototype for brcmf_do_escan()
+
+Reduce the number of parameters as the removed ones can be obtained
+through struct brcmf_if parameter.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 10 +++++-----
+ 1 file changed, 5 insertions(+), 5 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -1080,9 +1080,9 @@ exit:
+ }
+
+ static s32
+-brcmf_do_escan(struct brcmf_cfg80211_info *cfg, struct wiphy *wiphy,
+- struct brcmf_if *ifp, struct cfg80211_scan_request *request)
++brcmf_do_escan(struct brcmf_if *ifp, struct cfg80211_scan_request *request)
+ {
++ struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
+ s32 err;
+ u32 passive_scan;
+ struct brcmf_scan_results *results;
+@@ -1090,7 +1090,7 @@ brcmf_do_escan(struct brcmf_cfg80211_inf
+
+ brcmf_dbg(SCAN, "Enter\n");
+ escan->ifp = ifp;
+- escan->wiphy = wiphy;
++ escan->wiphy = cfg->wiphy;
+ escan->escan_state = WL_ESCAN_STATE_SCANNING;
+ passive_scan = cfg->active_scan ? 0 : 1;
+ err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PASSIVE_SCAN,
+@@ -1170,7 +1170,7 @@ brcmf_cfg80211_escan(struct wiphy *wiphy
+ if (err)
+ goto scan_out;
+
+- err = brcmf_do_escan(cfg, wiphy, vif->ifp, request);
++ err = brcmf_do_escan(vif->ifp, request);
+ if (err)
+ goto scan_out;
+ } else {
+@@ -3289,7 +3289,7 @@ brcmf_notify_sched_scan_results(struct b
+
+ set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
+ cfg->escan_info.run = brcmf_run_escan;
+- err = brcmf_do_escan(cfg, wiphy, ifp, request);
++ err = brcmf_do_escan(ifp, request);
+ if (err) {
+ clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
+ goto out_err;
diff --git a/package/kernel/mac80211/patches/357-0006-brcmfmac-make-internal-escan-more-generic.patch b/package/kernel/mac80211/patches/357-0006-brcmfmac-make-internal-escan-more-generic.patch
new file mode 100644
index 0000000..84a69f0
--- /dev/null
+++ b/package/kernel/mac80211/patches/357-0006-brcmfmac-make-internal-escan-more-generic.patch
@@ -0,0 +1,306 @@
+From fa85b30a908455ff25def3a5f319aad272ef4862 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Wed, 23 Nov 2016 10:25:25 +0000
+Subject: [PATCH] brcmfmac: make internal escan more generic
+
+For scheduled scan we initiate an escan in firmware to obtain more
+info missing from the scheduled scan notification we get from firmware.
+For upcoming functionality this is also required so make it a bit
+more generic.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../broadcom/brcm80211/brcmfmac/cfg80211.c | 187 ++++++++++++---------
+ .../broadcom/brcm80211/brcmfmac/cfg80211.h | 4 +-
+ 2 files changed, 109 insertions(+), 82 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -757,12 +757,12 @@ s32 brcmf_notify_escan_complete(struct b
+ brcmf_scan_config_mpc(ifp, 1);
+
+ /*
+- * e-scan can be initiated by scheduled scan
++ * e-scan can be initiated internally
+ * which takes precedence.
+ */
+- if (cfg->sched_escan) {
++ if (cfg->internal_escan) {
+ brcmf_dbg(SCAN, "scheduled scan completed\n");
+- cfg->sched_escan = false;
++ cfg->internal_escan = false;
+ if (!aborted)
+ cfg80211_sched_scan_results(cfg_to_wiphy(cfg));
+ } else if (scan_request) {
+@@ -3013,7 +3013,7 @@ void brcmf_abort_scanning(struct brcmf_c
+ struct escan_info *escan = &cfg->escan_info;
+
+ set_bit(BRCMF_SCAN_STATUS_ABORT, &cfg->scan_status);
+- if (cfg->scan_request) {
++ if (cfg->internal_escan || cfg->scan_request) {
+ escan->escan_state = WL_ESCAN_STATE_IDLE;
+ brcmf_notify_escan_complete(cfg, escan->ifp, true, true);
+ }
+@@ -3036,7 +3036,7 @@ static void brcmf_escan_timeout(unsigned
+ struct brcmf_cfg80211_info *cfg =
+ (struct brcmf_cfg80211_info *)data;
+
+- if (cfg->scan_request) {
++ if (cfg->internal_escan || cfg->scan_request) {
+ brcmf_err("timer expired\n");
+ schedule_work(&cfg->escan_timeout_work);
+ }
+@@ -3119,7 +3119,7 @@ brcmf_cfg80211_escan_handler(struct brcm
+ if (brcmf_p2p_scan_finding_common_channel(cfg, bss_info_le))
+ goto exit;
+
+- if (!cfg->scan_request) {
++ if (!cfg->internal_escan && !cfg->scan_request) {
+ brcmf_dbg(SCAN, "result without cfg80211 request\n");
+ goto exit;
+ }
+@@ -3165,7 +3165,7 @@ brcmf_cfg80211_escan_handler(struct brcm
+ cfg->escan_info.escan_state = WL_ESCAN_STATE_IDLE;
+ if (brcmf_p2p_scan_finding_common_channel(cfg, NULL))
+ goto exit;
+- if (cfg->scan_request) {
++ if (cfg->internal_escan || cfg->scan_request) {
+ brcmf_inform_bss(cfg);
+ aborted = status != BRCMF_E_STATUS_SUCCESS;
+ brcmf_notify_escan_complete(cfg, ifp, aborted, false);
+@@ -3190,6 +3190,73 @@ static void brcmf_init_escan(struct brcm
+ brcmf_cfg80211_escan_timeout_worker);
+ }
+
++static struct cfg80211_scan_request *
++brcmf_alloc_internal_escan_request(struct wiphy *wiphy, u32 n_netinfo) {
++ struct cfg80211_scan_request *req;
++ size_t req_size;
++
++ req_size = sizeof(*req) +
++ n_netinfo * sizeof(req->channels[0]) +
++ n_netinfo * sizeof(*req->ssids);
++
++ req = kzalloc(req_size, GFP_KERNEL);
++ if (req) {
++ req->wiphy = wiphy;
++ req->ssids = (void *)(&req->channels[0]) +
++ n_netinfo * sizeof(req->channels[0]);
++ }
++ return req;
++}
++
++static int brcmf_internal_escan_add_info(struct cfg80211_scan_request *req,
++ u8 *ssid, u8 ssid_len, u8 channel)
++{
++ struct ieee80211_channel *chan;
++ enum nl80211_band band;
++ int freq;
++
++ if (channel <= CH_MAX_2G_CHANNEL)
++ band = NL80211_BAND_2GHZ;
++ else
++ band = NL80211_BAND_5GHZ;
++
++ freq = ieee80211_channel_to_frequency(channel, band);
++ if (!freq)
++ return -EINVAL;
++
++ chan = ieee80211_get_channel(req->wiphy, freq);
++ if (!chan)
++ return -EINVAL;
++
++ req->channels[req->n_channels++] = chan;
++ memcpy(req->ssids[req->n_ssids].ssid, ssid, ssid_len);
++ req->ssids[req->n_ssids++].ssid_len = ssid_len;
++
++ return 0;
++}
++
++static int brcmf_start_internal_escan(struct brcmf_if *ifp,
++ struct cfg80211_scan_request *request)
++{
++ struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
++ int err;
++
++ if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
++ /* Abort any on-going scan */
++ brcmf_abort_scanning(cfg);
++ }
++
++ set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
++ cfg->escan_info.run = brcmf_run_escan;
++ err = brcmf_do_escan(ifp, request);
++ if (err) {
++ clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
++ return err;
++ }
++ cfg->internal_escan = true;
++ return 0;
++}
++
+ /* PFN result doesn't have all the info which are required by the supplicant
+ * (For e.g IEs) Do a target Escan so that sched scan results are reported
+ * via wl_inform_single_bss in the required format. Escan does require the
+@@ -3203,12 +3270,8 @@ brcmf_notify_sched_scan_results(struct b
+ struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
+ struct brcmf_pno_net_info_le *netinfo, *netinfo_start;
+ struct cfg80211_scan_request *request = NULL;
+- struct cfg80211_ssid *ssid = NULL;
+- struct ieee80211_channel *channel = NULL;
+ struct wiphy *wiphy = cfg_to_wiphy(cfg);
+- int err = 0;
+- int channel_req = 0;
+- int band = 0;
++ int i, err = 0;
+ struct brcmf_pno_scanresults_le *pfn_result;
+ u32 result_count;
+ u32 status;
+@@ -3234,83 +3297,47 @@ brcmf_notify_sched_scan_results(struct b
+ */
+ WARN_ON(status != BRCMF_PNO_SCAN_COMPLETE);
+ brcmf_dbg(SCAN, "PFN NET FOUND event. count: %d\n", result_count);
+- if (result_count > 0) {
+- int i;
+-
+- request = kzalloc(sizeof(*request), GFP_KERNEL);
+- ssid = kcalloc(result_count, sizeof(*ssid), GFP_KERNEL);
+- channel = kcalloc(result_count, sizeof(*channel), GFP_KERNEL);
+- if (!request || !ssid || !channel) {
+- err = -ENOMEM;
+- goto out_err;
+- }
++ if (!result_count) {
++ brcmf_err("FALSE PNO Event. (pfn_count == 0)\n");
++ goto out_err;
++ }
++ request = brcmf_alloc_internal_escan_request(wiphy,
++ result_count);
++ if (!request) {
++ err = -ENOMEM;
++ goto out_err;
++ }
+
+- request->wiphy = wiphy;
+- data += sizeof(struct brcmf_pno_scanresults_le);
+- netinfo_start = (struct brcmf_pno_net_info_le *)data;
+-
+- for (i = 0; i < result_count; i++) {
+- netinfo = &netinfo_start[i];
+- if (!netinfo) {
+- brcmf_err("Invalid netinfo ptr. index: %d\n",
+- i);
+- err = -EINVAL;
+- goto out_err;
+- }
++ data += sizeof(struct brcmf_pno_scanresults_le);
++ netinfo_start = (struct brcmf_pno_net_info_le *)data;
+
+- brcmf_dbg(SCAN, "SSID:%s Channel:%d\n",
+- netinfo->SSID, netinfo->channel);
+- memcpy(ssid[i].ssid, netinfo->SSID, netinfo->SSID_len);
+- ssid[i].ssid_len = netinfo->SSID_len;
+- request->n_ssids++;
+-
+- channel_req = netinfo->channel;
+- if (channel_req <= CH_MAX_2G_CHANNEL)
+- band = NL80211_BAND_2GHZ;
+- else
+- band = NL80211_BAND_5GHZ;
+- channel[i].center_freq =
+- ieee80211_channel_to_frequency(channel_req,
+- band);
+- channel[i].band = band;
+- channel[i].flags |= IEEE80211_CHAN_NO_HT40;
+- request->channels[i] = &channel[i];
+- request->n_channels++;
+- }
+-
+- /* assign parsed ssid array */
+- if (request->n_ssids)
+- request->ssids = &ssid[0];
+-
+- if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
+- /* Abort any on-going scan */
+- brcmf_abort_scanning(cfg);
++ for (i = 0; i < result_count; i++) {
++ netinfo = &netinfo_start[i];
++ if (!netinfo) {
++ brcmf_err("Invalid netinfo ptr. index: %d\n",
++ i);
++ err = -EINVAL;
++ goto out_err;
+ }
+
+- set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
+- cfg->escan_info.run = brcmf_run_escan;
+- err = brcmf_do_escan(ifp, request);
+- if (err) {
+- clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
++ brcmf_dbg(SCAN, "SSID:%.32s Channel:%d\n",
++ netinfo->SSID, netinfo->channel);
++ err = brcmf_internal_escan_add_info(request,
++ netinfo->SSID,
++ netinfo->SSID_len,
++ netinfo->channel);
++ if (err)
+ goto out_err;
+- }
+- cfg->sched_escan = true;
+- cfg->scan_request = request;
+- } else {
+- brcmf_err("FALSE PNO Event. (pfn_count == 0)\n");
+- goto out_err;
+ }
+
+- kfree(ssid);
+- kfree(channel);
+- kfree(request);
+- return 0;
++ err = brcmf_start_internal_escan(ifp, request);
++ if (!err)
++ goto free_req;
+
+ out_err:
+- kfree(ssid);
+- kfree(channel);
+- kfree(request);
+ cfg80211_sched_scan_stopped(wiphy);
++free_req:
++ kfree(request);
+ return err;
+ }
+
+@@ -3405,7 +3432,7 @@ static int brcmf_cfg80211_sched_scan_sto
+
+ brcmf_dbg(SCAN, "enter\n");
+ brcmf_pno_clean(ifp);
+- if (cfg->sched_escan)
++ if (cfg->internal_escan)
+ brcmf_notify_escan_complete(cfg, ifp, true, true);
+ return 0;
+ }
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
+@@ -271,7 +271,7 @@ struct brcmf_cfg80211_wowl {
+ * @pub: common driver information.
+ * @channel: current channel.
+ * @active_scan: current scan mode.
+- * @sched_escan: e-scan for scheduled scan support running.
++ * @internal_escan: indicates internally initiated e-scan is running.
+ * @ibss_starter: indicates this sta is ibss starter.
+ * @pwr_save: indicate whether dongle to support power save mode.
+ * @dongle_up: indicate whether dongle up or not.
+@@ -303,7 +303,7 @@ struct brcmf_cfg80211_info {
+ struct brcmf_pub *pub;
+ u32 channel;
+ bool active_scan;
+- bool sched_escan;
++ bool internal_escan;
+ bool ibss_starter;
+ bool pwr_save;
+ bool dongle_up;
diff --git a/package/kernel/mac80211/patches/357-0007-brcmfmac-split-up-brcmf_pno_config-function.patch b/package/kernel/mac80211/patches/357-0007-brcmfmac-split-up-brcmf_pno_config-function.patch
new file mode 100644
index 0000000..f81523a
--- /dev/null
+++ b/package/kernel/mac80211/patches/357-0007-brcmfmac-split-up-brcmf_pno_config-function.patch
@@ -0,0 +1,176 @@
+From fca6cb2f059e51dec3fcf3589a5abbbcce5b4043 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Wed, 23 Nov 2016 10:25:26 +0000
+Subject: [PATCH] brcmfmac: split up brcmf_pno_config() function
+
+The brcmf_pno_config() function handles two configurations in
+firmware. Split it and have caller sort out what is needed.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../broadcom/brcm80211/brcmfmac/cfg80211.c | 11 +++-
+ .../net/wireless/broadcom/brcm80211/brcmfmac/pno.c | 60 ++++++++++++++++------
+ .../net/wireless/broadcom/brcm80211/brcmfmac/pno.h | 17 ++++--
+ 3 files changed, 68 insertions(+), 20 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -42,6 +42,7 @@
+ #include "common.h"
+
+ #define BRCMF_SCAN_IE_LEN_MAX 2048
++#define BRCMF_SCHED_SCAN_PERIOD 30
+
+ #define WPA_OUI "\x00\x50\xF2" /* WPA OUI */
+ #define WPA_OUI_TYPE 1
+@@ -3396,10 +3397,18 @@ brcmf_cfg80211_sched_scan_start(struct w
+ }
+
+ /* configure pno */
+- ret = brcmf_pno_config(ifp, req);
++ ret = brcmf_pno_config(ifp, BRCMF_SCHED_SCAN_PERIOD, 0, 0);
+ if (ret < 0)
+ return ret;
+
++ /* configure random mac */
++ if (req->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) {
++ ret = brcmf_pno_set_random(ifp, req->mac_addr,
++ req->mac_addr_mask);
++ if (ret < 0)
++ return ret;
++ }
++
+ /* configure each match set */
+ for (i = 0; i < req->n_match_sets; i++) {
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
+@@ -23,10 +23,12 @@
+ #include "fwil_types.h"
+
+ #define BRCMF_PNO_VERSION 2
+-#define BRCMF_PNO_TIME 30
+ #define BRCMF_PNO_REPEAT 4
+ #define BRCMF_PNO_FREQ_EXPO_MAX 3
++#define BRCMF_PNO_IMMEDIATE_SCAN_BIT 3
++#define BRCMF_PNO_ENABLE_BD_SCAN_BIT 5
+ #define BRCMF_PNO_ENABLE_ADAPTSCAN_BIT 6
++#define BRCMF_PNO_REPORT_SEPARATELY_BIT 11
+ #define BRCMF_PNO_SCAN_INCOMPLETE 0
+ #define BRCMF_PNO_WPA_AUTH_ANY 0xFFFFFFFF
+ #define BRCMF_PNO_HIDDEN_BIT 2
+@@ -47,42 +49,68 @@ int brcmf_pno_clean(struct brcmf_if *ifp
+ return ret;
+ }
+
+-int brcmf_pno_config(struct brcmf_if *ifp,
+- struct cfg80211_sched_scan_request *request)
++int brcmf_pno_config(struct brcmf_if *ifp, u32 scan_freq,
++ u32 mscan, u32 bestn)
+ {
+ struct brcmf_pno_param_le pfn_param;
+- struct brcmf_pno_macaddr_le pfn_mac;
++ u16 flags;
++ u32 pfnmem;
+ s32 err;
+- u8 *mac_mask;
+- int i;
+
+ memset(&pfn_param, 0, sizeof(pfn_param));
+ pfn_param.version = cpu_to_le32(BRCMF_PNO_VERSION);
+
+ /* set extra pno params */
+- pfn_param.flags = cpu_to_le16(1 << BRCMF_PNO_ENABLE_ADAPTSCAN_BIT);
++ flags = BIT(BRCMF_PNO_IMMEDIATE_SCAN_BIT) |
++ BIT(BRCMF_PNO_REPORT_SEPARATELY_BIT) |
++ BIT(BRCMF_PNO_ENABLE_ADAPTSCAN_BIT);
+ pfn_param.repeat = BRCMF_PNO_REPEAT;
+ pfn_param.exp = BRCMF_PNO_FREQ_EXPO_MAX;
+
+ /* set up pno scan fr */
+- pfn_param.scan_freq = cpu_to_le32(BRCMF_PNO_TIME);
++ pfn_param.scan_freq = cpu_to_le32(scan_freq);
++
++ if (mscan) {
++ pfnmem = bestn;
+
++ /* set bestn in firmware */
++ err = brcmf_fil_iovar_int_set(ifp, "pfnmem", pfnmem);
++ if (err < 0) {
++ brcmf_err("failed to set pfnmem\n");
++ goto exit;
++ }
++ /* get max mscan which the firmware supports */
++ err = brcmf_fil_iovar_int_get(ifp, "pfnmem", &pfnmem);
++ if (err < 0) {
++ brcmf_err("failed to get pfnmem\n");
++ goto exit;
++ }
++ mscan = min_t(u32, mscan, pfnmem);
++ pfn_param.mscan = mscan;
++ pfn_param.bestn = bestn;
++ flags |= BIT(BRCMF_PNO_ENABLE_BD_SCAN_BIT);
++ brcmf_dbg(INFO, "mscan=%d, bestn=%d\n", mscan, bestn);
++ }
++
++ pfn_param.flags = cpu_to_le16(flags);
+ err = brcmf_fil_iovar_data_set(ifp, "pfn_set", &pfn_param,
+ sizeof(pfn_param));
+- if (err) {
++ if (err)
+ brcmf_err("pfn_set failed, err=%d\n", err);
+- return err;
+- }
+
+- /* Find out if mac randomization should be turned on */
+- if (!(request->flags & NL80211_SCAN_FLAG_RANDOM_ADDR))
+- return 0;
++exit:
++ return err;
++}
++
++int brcmf_pno_set_random(struct brcmf_if *ifp, u8 *mac_addr, u8 *mac_mask)
++{
++ struct brcmf_pno_macaddr_le pfn_mac;
++ int err, i;
+
+ pfn_mac.version = BRCMF_PFN_MACADDR_CFG_VER;
+ pfn_mac.flags = BRCMF_PFN_MAC_OUI_ONLY | BRCMF_PFN_SET_MAC_UNASSOC;
+
+- memcpy(pfn_mac.mac, request->mac_addr, ETH_ALEN);
+- mac_mask = request->mac_addr_mask;
++ memcpy(pfn_mac.mac, mac_addr, ETH_ALEN);
+ for (i = 0; i < ETH_ALEN; i++) {
+ pfn_mac.mac[i] &= mac_mask[i];
+ pfn_mac.mac[i] |= get_random_int() & ~(mac_mask[i]);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
+@@ -30,10 +30,21 @@ int brcmf_pno_clean(struct brcmf_if *ifp
+ * brcmf_pno_config - configure pno parameters.
+ *
+ * @ifp: interface object used.
+- * @request: scheduled scan parameters.
++ * @scan_freq: scan frequency period in seconds.
++ * @mscan: maximum number of scans stored in firmware.
++ * @bestn: maximum number of APs per scan stored in firmware.
+ */
+-int brcmf_pno_config(struct brcmf_if *ifp,
+- struct cfg80211_sched_scan_request *request);
++int brcmf_pno_config(struct brcmf_if *ifp, u32 scan_freq,
++ u32 mscan, u32 bestn);
++
++/**
++ * brcmf_pno_set_random - setup randomisation mac address for pno.
++ *
++ * @ifp: interface object used.
++ * @mac_addr: MAC address used with randomisation.
++ * @mac_mask: MAC address mask used for randomisation.
++ */
++int brcmf_pno_set_random(struct brcmf_if *ifp, u8 *mac_addr, u8 *mac_mask);
+
+ /**
+ * brcmf_pno_add_ssid - add ssid for pno in firmware.
diff --git a/package/kernel/mac80211/patches/357-0008-brcmfmac-move-scheduled-scan-activation-to-pno-sourc.patch b/package/kernel/mac80211/patches/357-0008-brcmfmac-move-scheduled-scan-activation-to-pno-sourc.patch
new file mode 100644
index 0000000..6dcea28
--- /dev/null
+++ b/package/kernel/mac80211/patches/357-0008-brcmfmac-move-scheduled-scan-activation-to-pno-sourc.patch
@@ -0,0 +1,292 @@
+From 3e48611d31dd333be01576902f2dc11adefc9a06 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Wed, 23 Nov 2016 10:25:27 +0000
+Subject: [PATCH] brcmfmac: move scheduled scan activation to pno source file
+
+Rework .sched_scan_start() callback moving actual configuration of
+the device in pno source file.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../broadcom/brcm80211/brcmfmac/cfg80211.c | 65 +-----------
+ .../net/wireless/broadcom/brcm80211/brcmfmac/pno.c | 110 +++++++++++++++++----
+ .../net/wireless/broadcom/brcm80211/brcmfmac/pno.h | 29 +-----
+ 3 files changed, 94 insertions(+), 110 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -42,7 +42,6 @@
+ #include "common.h"
+
+ #define BRCMF_SCAN_IE_LEN_MAX 2048
+-#define BRCMF_SCHED_SCAN_PERIOD 30
+
+ #define WPA_OUI "\x00\x50\xF2" /* WPA OUI */
+ #define WPA_OUI_TYPE 1
+@@ -3342,24 +3341,6 @@ free_req:
+ return err;
+ }
+
+-static bool brcmf_is_ssid_active(struct cfg80211_ssid *ssid,
+- struct cfg80211_sched_scan_request *req)
+-{
+- int i;
+-
+- if (!ssid || !req->ssids || !req->n_ssids)
+- return false;
+-
+- for (i = 0; i < req->n_ssids; i++) {
+- if (ssid->ssid_len == req->ssids[i].ssid_len) {
+- if (!strncmp(ssid->ssid, req->ssids[i].ssid,
+- ssid->ssid_len))
+- return true;
+- }
+- }
+- return false;
+-}
+-
+ static int
+ brcmf_cfg80211_sched_scan_start(struct wiphy *wiphy,
+ struct net_device *ndev,
+@@ -3367,9 +3348,6 @@ brcmf_cfg80211_sched_scan_start(struct w
+ {
+ struct brcmf_if *ifp = netdev_priv(ndev);
+ struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy);
+- struct cfg80211_ssid *ssid;
+- int i;
+- int ret = 0;
+
+ brcmf_dbg(SCAN, "Enter n_match_sets:%d n_ssids:%d\n",
+ req->n_match_sets, req->n_ssids);
+@@ -3389,48 +3367,7 @@ brcmf_cfg80211_sched_scan_start(struct w
+ return -EINVAL;
+ }
+
+- /* clean up everything */
+- ret = brcmf_pno_clean(ifp);
+- if (ret < 0) {
+- brcmf_err("failed error=%d\n", ret);
+- return ret;
+- }
+-
+- /* configure pno */
+- ret = brcmf_pno_config(ifp, BRCMF_SCHED_SCAN_PERIOD, 0, 0);
+- if (ret < 0)
+- return ret;
+-
+- /* configure random mac */
+- if (req->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) {
+- ret = brcmf_pno_set_random(ifp, req->mac_addr,
+- req->mac_addr_mask);
+- if (ret < 0)
+- return ret;
+- }
+-
+- /* configure each match set */
+- for (i = 0; i < req->n_match_sets; i++) {
+-
+- ssid = &req->match_sets[i].ssid;
+-
+- if (!ssid->ssid_len) {
+- brcmf_err("skip broadcast ssid\n");
+- continue;
+- }
+-
+- ret = brcmf_pno_add_ssid(ifp, ssid,
+- brcmf_is_ssid_active(ssid, req));
+- if (ret < 0)
+- brcmf_dbg(SCAN, ">>> PNO filter %s for ssid (%s)\n",
+- ret == 0 ? "set" : "failed", ssid->ssid);
+- }
+- /* Enable the PNO */
+- ret = brcmf_fil_iovar_int_set(ifp, "pfn", 1);
+- if (ret < 0)
+- brcmf_err("PNO enable failed!! ret=%d\n", ret);
+-
+- return ret;
++ return brcmf_pno_start_sched_scan(ifp, req);
+ }
+
+ static int brcmf_cfg80211_sched_scan_stop(struct wiphy *wiphy,
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
+@@ -32,25 +32,10 @@
+ #define BRCMF_PNO_SCAN_INCOMPLETE 0
+ #define BRCMF_PNO_WPA_AUTH_ANY 0xFFFFFFFF
+ #define BRCMF_PNO_HIDDEN_BIT 2
++#define BRCMF_PNO_SCHED_SCAN_PERIOD 30
+
+-int brcmf_pno_clean(struct brcmf_if *ifp)
+-{
+- int ret;
+-
+- /* Disable pfn */
+- ret = brcmf_fil_iovar_int_set(ifp, "pfn", 0);
+- if (ret == 0) {
+- /* clear pfn */
+- ret = brcmf_fil_iovar_data_set(ifp, "pfnclear", NULL, 0);
+- }
+- if (ret < 0)
+- brcmf_err("failed code %d\n", ret);
+-
+- return ret;
+-}
+-
+-int brcmf_pno_config(struct brcmf_if *ifp, u32 scan_freq,
+- u32 mscan, u32 bestn)
++static int brcmf_pno_config(struct brcmf_if *ifp, u32 scan_freq,
++ u32 mscan, u32 bestn)
+ {
+ struct brcmf_pno_param_le pfn_param;
+ u16 flags;
+@@ -102,7 +87,8 @@ exit:
+ return err;
+ }
+
+-int brcmf_pno_set_random(struct brcmf_if *ifp, u8 *mac_addr, u8 *mac_mask)
++static int brcmf_pno_set_random(struct brcmf_if *ifp, u8 *mac_addr,
++ u8 *mac_mask)
+ {
+ struct brcmf_pno_macaddr_le pfn_mac;
+ int err, i;
+@@ -128,8 +114,8 @@ int brcmf_pno_set_random(struct brcmf_if
+ return err;
+ }
+
+-int brcmf_pno_add_ssid(struct brcmf_if *ifp, struct cfg80211_ssid *ssid,
+- bool active)
++static int brcmf_pno_add_ssid(struct brcmf_if *ifp, struct cfg80211_ssid *ssid,
++ bool active)
+ {
+ struct brcmf_pno_net_param_le pfn;
+
+@@ -144,3 +130,85 @@ int brcmf_pno_add_ssid(struct brcmf_if *
+ return brcmf_fil_iovar_data_set(ifp, "pfn_add", &pfn, sizeof(pfn));
+ }
+
++static bool brcmf_is_ssid_active(struct cfg80211_ssid *ssid,
++ struct cfg80211_sched_scan_request *req)
++{
++ int i;
++
++ if (!ssid || !req->ssids || !req->n_ssids)
++ return false;
++
++ for (i = 0; i < req->n_ssids; i++) {
++ if (ssid->ssid_len == req->ssids[i].ssid_len) {
++ if (!strncmp(ssid->ssid, req->ssids[i].ssid,
++ ssid->ssid_len))
++ return true;
++ }
++ }
++ return false;
++}
++
++int brcmf_pno_clean(struct brcmf_if *ifp)
++{
++ int ret;
++
++ /* Disable pfn */
++ ret = brcmf_fil_iovar_int_set(ifp, "pfn", 0);
++ if (ret == 0) {
++ /* clear pfn */
++ ret = brcmf_fil_iovar_data_set(ifp, "pfnclear", NULL, 0);
++ }
++ if (ret < 0)
++ brcmf_err("failed code %d\n", ret);
++
++ return ret;
++}
++
++int brcmf_pno_start_sched_scan(struct brcmf_if *ifp,
++ struct cfg80211_sched_scan_request *req)
++{
++ struct cfg80211_ssid *ssid;
++ int i, ret;
++
++ /* clean up everything */
++ ret = brcmf_pno_clean(ifp);
++ if (ret < 0) {
++ brcmf_err("failed error=%d\n", ret);
++ return ret;
++ }
++
++ /* configure pno */
++ ret = brcmf_pno_config(ifp, BRCMF_PNO_SCHED_SCAN_PERIOD, 0, 0);
++ if (ret < 0)
++ return ret;
++
++ /* configure random mac */
++ if (req->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) {
++ ret = brcmf_pno_set_random(ifp, req->mac_addr,
++ req->mac_addr_mask);
++ if (ret < 0)
++ return ret;
++ }
++
++ /* configure each match set */
++ for (i = 0; i < req->n_match_sets; i++) {
++ ssid = &req->match_sets[i].ssid;
++ if (!ssid->ssid_len) {
++ brcmf_err("skip broadcast ssid\n");
++ continue;
++ }
++
++ ret = brcmf_pno_add_ssid(ifp, ssid,
++ brcmf_is_ssid_active(ssid, req));
++ if (ret < 0)
++ brcmf_dbg(SCAN, ">>> PNO filter %s for ssid (%s)\n",
++ ret == 0 ? "set" : "failed", ssid->ssid);
++ }
++ /* Enable the PNO */
++ ret = brcmf_fil_iovar_int_set(ifp, "pfn", 1);
++ if (ret < 0)
++ brcmf_err("PNO enable failed!! ret=%d\n", ret);
++
++ return ret;
++}
++
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
+@@ -27,33 +27,12 @@
+ int brcmf_pno_clean(struct brcmf_if *ifp);
+
+ /**
+- * brcmf_pno_config - configure pno parameters.
++ * brcmf_pno_start_sched_scan - initiate scheduled scan on device.
+ *
+ * @ifp: interface object used.
+- * @scan_freq: scan frequency period in seconds.
+- * @mscan: maximum number of scans stored in firmware.
+- * @bestn: maximum number of APs per scan stored in firmware.
++ * @req: configuration parameters for scheduled scan.
+ */
+-int brcmf_pno_config(struct brcmf_if *ifp, u32 scan_freq,
+- u32 mscan, u32 bestn);
+-
+-/**
+- * brcmf_pno_set_random - setup randomisation mac address for pno.
+- *
+- * @ifp: interface object used.
+- * @mac_addr: MAC address used with randomisation.
+- * @mac_mask: MAC address mask used for randomisation.
+- */
+-int brcmf_pno_set_random(struct brcmf_if *ifp, u8 *mac_addr, u8 *mac_mask);
+-
+-/**
+- * brcmf_pno_add_ssid - add ssid for pno in firmware.
+- *
+- * @ifp: interface object used.
+- * @ssid: ssid information.
+- * @active: indicate this ssid needs to be actively probed.
+- */
+-int brcmf_pno_add_ssid(struct brcmf_if *ifp, struct cfg80211_ssid *ssid,
+- bool active);
++int brcmf_pno_start_sched_scan(struct brcmf_if *ifp,
++ struct cfg80211_sched_scan_request *req);
+
+ #endif /* _BRCMF_PNO_H */
diff --git a/package/kernel/mac80211/patches/357-0009-brcmfmac-use-provided-channels-for-scheduled-scan.patch b/package/kernel/mac80211/patches/357-0009-brcmfmac-use-provided-channels-for-scheduled-scan.patch
new file mode 100644
index 0000000..fae844c
--- /dev/null
+++ b/package/kernel/mac80211/patches/357-0009-brcmfmac-use-provided-channels-for-scheduled-scan.patch
@@ -0,0 +1,111 @@
+From 331e789443618ca9cc3ed48ada4e670225cca036 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Wed, 23 Nov 2016 10:25:28 +0000
+Subject: [PATCH] brcmfmac: use provided channels for scheduled scan
+
+User-space can provide list of channels in the schedule scan request.
+This was ignored so all channels supported and allowed by the device
+were used. This patch configures the device to use the channels as
+listed in the request.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../broadcom/brcm80211/brcmfmac/fwil_types.h | 16 +++++++++++++
+ .../net/wireless/broadcom/brcm80211/brcmfmac/pno.c | 26 +++++++++++++++++++++-
+ 2 files changed, 41 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
+@@ -131,6 +131,7 @@
+ #define BRCMF_TXBF_MU_BFR_CAP BIT(1)
+
+ #define BRCMF_MAXPMKID 16 /* max # PMKID cache entries */
++#define BRCMF_NUMCHANNELS 64
+
+ #define BRCMF_PFN_MACADDR_CFG_VER 1
+ #define BRCMF_PFN_MAC_OUI_ONLY BIT(0)
+@@ -719,6 +720,21 @@ struct brcmf_pno_param_le {
+ };
+
+ /**
++ * struct brcmf_pno_config_le - PNO channel configuration.
++ *
++ * @reporttype: determines what is reported.
++ * @channel_num: number of channels specified in @channel_list.
++ * @channel_list: channels to use in PNO scan.
++ * @flags: reserved.
++ */
++struct brcmf_pno_config_le {
++ __le32 reporttype;
++ __le32 channel_num;
++ __le16 channel_list[BRCMF_NUMCHANNELS];
++ __le32 flags;
++};
++
++/**
+ * struct brcmf_pno_net_param_le - scan parameters per preferred network.
+ *
+ * @ssid: ssid name and its length.
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
+@@ -18,9 +18,10 @@
+
+ #include "core.h"
+ #include "debug.h"
+-#include "pno.h"
+ #include "fwil.h"
+ #include "fwil_types.h"
++#include "cfg80211.h"
++#include "pno.h"
+
+ #define BRCMF_PNO_VERSION 2
+ #define BRCMF_PNO_REPEAT 4
+@@ -34,6 +35,15 @@
+ #define BRCMF_PNO_HIDDEN_BIT 2
+ #define BRCMF_PNO_SCHED_SCAN_PERIOD 30
+
++static int brcmf_pno_channel_config(struct brcmf_if *ifp,
++ struct brcmf_pno_config_le *cfg)
++{
++ cfg->reporttype = 0;
++ cfg->flags = 0;
++
++ return brcmf_fil_iovar_data_set(ifp, "pfn_cfg", cfg, sizeof(*cfg));
++}
++
+ static int brcmf_pno_config(struct brcmf_if *ifp, u32 scan_freq,
+ u32 mscan, u32 bestn)
+ {
+@@ -167,7 +177,10 @@ int brcmf_pno_clean(struct brcmf_if *ifp
+ int brcmf_pno_start_sched_scan(struct brcmf_if *ifp,
+ struct cfg80211_sched_scan_request *req)
+ {
++ struct brcmu_d11inf *d11inf;
++ struct brcmf_pno_config_le pno_cfg;
+ struct cfg80211_ssid *ssid;
++ u16 chan;
+ int i, ret;
+
+ /* clean up everything */
+@@ -190,6 +203,17 @@ int brcmf_pno_start_sched_scan(struct br
+ return ret;
+ }
+
++ /* configure channels to use */
++ d11inf = &ifp->drvr->config->d11inf;
++ for (i = 0; i < req->n_channels; i++) {
++ chan = req->channels[i]->hw_value;
++ pno_cfg.channel_list[i] = cpu_to_le16(chan);
++ }
++ if (req->n_channels) {
++ pno_cfg.channel_num = cpu_to_le32(req->n_channels);
++ brcmf_pno_channel_config(ifp, &pno_cfg);
++ }
++
+ /* configure each match set */
+ for (i = 0; i < req->n_match_sets; i++) {
+ ssid = &req->match_sets[i].ssid;
diff --git a/package/kernel/mac80211/patches/357-0010-brcmfmac-remove-restriction-from-.sched_scan_start-c.patch b/package/kernel/mac80211/patches/357-0010-brcmfmac-remove-restriction-from-.sched_scan_start-c.patch
new file mode 100644
index 0000000..d14a60a
--- /dev/null
+++ b/package/kernel/mac80211/patches/357-0010-brcmfmac-remove-restriction-from-.sched_scan_start-c.patch
@@ -0,0 +1,34 @@
+From dfe5b0d52d5880bd9d4b427e1a53c9e9e4c3c820 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Wed, 23 Nov 2016 10:25:29 +0000
+Subject: [PATCH] brcmfmac: remove restriction from .sched_scan_start()
+ callback
+
+In the .sched_scan_start() callback a condition was checked whether a
+normal scan was ongoing. However, there is no need for this check as
+it is ok to start the scheduled scan irrespective whether or not a
+normal scan is ongoing.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 5 +----
+ 1 file changed, 1 insertion(+), 4 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -3351,10 +3351,7 @@ brcmf_cfg80211_sched_scan_start(struct w
+
+ brcmf_dbg(SCAN, "Enter n_match_sets:%d n_ssids:%d\n",
+ req->n_match_sets, req->n_ssids);
+- if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
+- brcmf_err("Scanning already: status (%lu)\n", cfg->scan_status);
+- return -EAGAIN;
+- }
++
+ if (test_bit(BRCMF_SCAN_STATUS_SUPPRESS, &cfg->scan_status)) {
+ brcmf_err("Scanning suppressed: status (%lu)\n",
+ cfg->scan_status);
diff --git a/package/kernel/mac80211/patches/357-0011-brcmfmac-use-requested-scan-interval-in-scheduled-sc.patch b/package/kernel/mac80211/patches/357-0011-brcmfmac-use-requested-scan-interval-in-scheduled-sc.patch
new file mode 100644
index 0000000..eb1d5d3
--- /dev/null
+++ b/package/kernel/mac80211/patches/357-0011-brcmfmac-use-requested-scan-interval-in-scheduled-sc.patch
@@ -0,0 +1,67 @@
+From c6989fd55ceb633d2f18c12ffae01b9123125c89 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Wed, 23 Nov 2016 10:25:30 +0000
+Subject: [PATCH] brcmfmac: use requested scan interval in scheduled scan
+
+User-space can specify the interval for the scheduled scan. This
+interval is found in scheduled scan plan. The driver supports only
+one plan, which is legacy behaviour.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 1 +
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c | 6 +++++-
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h | 6 ++++--
+ 3 files changed, 10 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -6312,6 +6312,7 @@ static void brcmf_wiphy_pno_params(struc
+ wiphy->max_sched_scan_ssids = BRCMF_PNO_MAX_PFN_COUNT;
+ wiphy->max_match_sets = BRCMF_PNO_MAX_PFN_COUNT;
+ wiphy->max_sched_scan_ie_len = BRCMF_SCAN_IE_LEN_MAX;
++ wiphy->max_sched_scan_plan_interval = BRCMF_PNO_SCHED_SCAN_MAX_PERIOD;
+ wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN;
+ }
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
+@@ -63,6 +63,10 @@ static int brcmf_pno_config(struct brcmf
+ pfn_param.exp = BRCMF_PNO_FREQ_EXPO_MAX;
+
+ /* set up pno scan fr */
++ if (scan_freq < BRCMF_PNO_SCHED_SCAN_MIN_PERIOD) {
++ brcmf_dbg(SCAN, "scan period too small, using minimum\n");
++ scan_freq = BRCMF_PNO_SCHED_SCAN_MIN_PERIOD;
++ }
+ pfn_param.scan_freq = cpu_to_le32(scan_freq);
+
+ if (mscan) {
+@@ -191,7 +195,7 @@ int brcmf_pno_start_sched_scan(struct br
+ }
+
+ /* configure pno */
+- ret = brcmf_pno_config(ifp, BRCMF_PNO_SCHED_SCAN_PERIOD, 0, 0);
++ ret = brcmf_pno_config(ifp, req->scan_plans[0].interval, 0, 0);
+ if (ret < 0)
+ return ret;
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
+@@ -16,8 +16,10 @@
+ #ifndef _BRCMF_PNO_H
+ #define _BRCMF_PNO_H
+
+-#define BRCMF_PNO_SCAN_COMPLETE 1
+-#define BRCMF_PNO_MAX_PFN_COUNT 16
++#define BRCMF_PNO_SCAN_COMPLETE 1
++#define BRCMF_PNO_MAX_PFN_COUNT 16
++#define BRCMF_PNO_SCHED_SCAN_MIN_PERIOD 10
++#define BRCMF_PNO_SCHED_SCAN_MAX_PERIOD 508
+
+ /**
+ * brcmf_pno_clean - disable and clear pno in firmware.
diff --git a/package/kernel/mac80211/patches/357-0012-brcmfmac-fix-scheduled-scan-result-handling-for-newe.patch b/package/kernel/mac80211/patches/357-0012-brcmfmac-fix-scheduled-scan-result-handling-for-newe.patch
new file mode 100644
index 0000000..bbd8774
--- /dev/null
+++ b/package/kernel/mac80211/patches/357-0012-brcmfmac-fix-scheduled-scan-result-handling-for-newe.patch
@@ -0,0 +1,76 @@
+From 53e3a80d80c80bf50ab64cf6c44fb0fa41aa22d8 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Wed, 23 Nov 2016 10:25:31 +0000
+Subject: [PATCH] brcmfmac: fix scheduled scan result handling for newer chips
+
+The scan results for scheduled scan as retrieved from the device
+have changed. A field has been added which is not needed. However,
+the appended info is. Luckily they are versioned so check that to
+find out the location of the appended data.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../broadcom/brcm80211/brcmfmac/cfg80211.c | 24 +++++++++++++++++++++-
+ .../broadcom/brcm80211/brcmfmac/fwil_types.h | 7 +++++++
+ 2 files changed, 30 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -3257,6 +3257,28 @@ static int brcmf_start_internal_escan(st
+ return 0;
+ }
+
++static struct brcmf_pno_net_info_le *
++brcmf_get_netinfo_array(struct brcmf_pno_scanresults_le *pfn_v1)
++{
++ struct brcmf_pno_scanresults_v2_le *pfn_v2;
++ struct brcmf_pno_net_info_le *netinfo;
++
++ switch (pfn_v1->version) {
++ default:
++ WARN_ON(1);
++ /* fall-thru */
++ case cpu_to_le32(1):
++ netinfo = (struct brcmf_pno_net_info_le *)(pfn_v1 + 1);
++ break;
++ case cpu_to_le32(2):
++ pfn_v2 = (struct brcmf_pno_scanresults_v2_le *)pfn_v1;
++ netinfo = (struct brcmf_pno_net_info_le *)(pfn_v2 + 1);
++ break;
++ }
++
++ return netinfo;
++}
++
+ /* PFN result doesn't have all the info which are required by the supplicant
+ * (For e.g IEs) Do a target Escan so that sched scan results are reported
+ * via wl_inform_single_bss in the required format. Escan does require the
+@@ -3309,7 +3331,7 @@ brcmf_notify_sched_scan_results(struct b
+ }
+
+ data += sizeof(struct brcmf_pno_scanresults_le);
+- netinfo_start = (struct brcmf_pno_net_info_le *)data;
++ netinfo_start = brcmf_get_netinfo_array(pfn_result);
+
+ for (i = 0; i < result_count; i++) {
+ netinfo = &netinfo_start[i];
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
+@@ -785,6 +785,13 @@ struct brcmf_pno_scanresults_le {
+ __le32 count;
+ };
+
++struct brcmf_pno_scanresults_v2_le {
++ __le32 version;
++ __le32 status;
++ __le32 count;
++ __le32 scan_ch_bucket;
++};
++
+ /**
+ * struct brcmf_pno_macaddr_le - to configure PNO macaddr randomization.
+ *
diff --git a/package/kernel/mac80211/patches/360-0001-brcmfmac-avoid-writing-channel-out-of-allocated-arra.patch b/package/kernel/mac80211/patches/360-0001-brcmfmac-avoid-writing-channel-out-of-allocated-arra.patch
index 58af4d9..c2ea368 100644
--- a/package/kernel/mac80211/patches/360-0001-brcmfmac-avoid-writing-channel-out-of-allocated-arra.patch
+++ b/package/kernel/mac80211/patches/360-0001-brcmfmac-avoid-writing-channel-out-of-allocated-arra.patch
@@ -28,7 +28,7 @@ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -5915,7 +5915,6 @@ static int brcmf_construct_chaninfo(stru
+@@ -5823,7 +5823,6 @@ static int brcmf_construct_chaninfo(stru
u32 i, j;
u32 total;
u32 chaninfo;
@@ -36,7 +36,7 @@ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
pbuf = kzalloc(BRCMF_DCMD_MEDLEN, GFP_KERNEL);
-@@ -5963,33 +5962,36 @@ static int brcmf_construct_chaninfo(stru
+@@ -5871,33 +5870,36 @@ static int brcmf_construct_chaninfo(stru
ch.bw == BRCMU_CHAN_BW_80)
continue;
@@ -85,7 +85,7 @@ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
ch.bw = BRCMU_CHAN_BW_20;
cfg->d11inf.encchspec(&ch);
chaninfo = ch.chspec;
-@@ -5997,11 +5999,11 @@ static int brcmf_construct_chaninfo(stru
+@@ -5905,11 +5907,11 @@ static int brcmf_construct_chaninfo(stru
&chaninfo);
if (!err) {
if (chaninfo & WL_CHAN_RADAR)
diff --git a/package/kernel/mac80211/patches/360-0002-brcmfmac-don-t-preset-all-channels-as-disabled.patch b/package/kernel/mac80211/patches/360-0002-brcmfmac-don-t-preset-all-channels-as-disabled.patch
index dbe4564..5a66a35 100644
--- a/package/kernel/mac80211/patches/360-0002-brcmfmac-don-t-preset-all-channels-as-disabled.patch
+++ b/package/kernel/mac80211/patches/360-0002-brcmfmac-don-t-preset-all-channels-as-disabled.patch
@@ -17,7 +17,7 @@ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -147,7 +147,6 @@ static struct ieee80211_rate __wl_rates[
+@@ -138,7 +138,6 @@ static struct ieee80211_rate __wl_rates[
.band = NL80211_BAND_2GHZ, \
.center_freq = (_freq), \
.hw_value = (_channel), \
@@ -25,7 +25,7 @@ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
.max_antenna_gain = 0, \
.max_power = 30, \
}
-@@ -156,7 +155,6 @@ static struct ieee80211_rate __wl_rates[
+@@ -147,7 +146,6 @@ static struct ieee80211_rate __wl_rates[
.band = NL80211_BAND_5GHZ, \
.center_freq = 5000 + (5 * (_channel)), \
.hw_value = (_channel), \
diff --git a/package/kernel/mac80211/patches/360-0003-brcmfmac-setup-wiphy-bands-after-registering-it-firs.patch b/package/kernel/mac80211/patches/360-0003-brcmfmac-setup-wiphy-bands-after-registering-it-firs.patch
index 9c773bd..29ebad7 100644
--- a/package/kernel/mac80211/patches/360-0003-brcmfmac-setup-wiphy-bands-after-registering-it-firs.patch
+++ b/package/kernel/mac80211/patches/360-0003-brcmfmac-setup-wiphy-bands-after-registering-it-firs.patch
@@ -25,7 +25,7 @@ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -6566,8 +6566,7 @@ static int brcmf_setup_wiphy(struct wiph
+@@ -6475,8 +6475,7 @@ static int brcmf_setup_wiphy(struct wiph
wiphy->bands[NL80211_BAND_5GHZ] = band;
}
}
@@ -35,7 +35,7 @@ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
}
static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg)
-@@ -6932,6 +6931,12 @@ struct brcmf_cfg80211_info *brcmf_cfg802
+@@ -6841,6 +6840,12 @@ struct brcmf_cfg80211_info *brcmf_cfg802
goto priv_out;
}
diff --git a/package/kernel/mac80211/patches/841-brcmfmac-use-wiphy_read_of_freq_limits.patch b/package/kernel/mac80211/patches/841-brcmfmac-use-wiphy_read_of_freq_limits.patch
index 9f26a49..c23d4c0 100644
--- a/package/kernel/mac80211/patches/841-brcmfmac-use-wiphy_read_of_freq_limits.patch
+++ b/package/kernel/mac80211/patches/841-brcmfmac-use-wiphy_read_of_freq_limits.patch
@@ -9,7 +9,7 @@ Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -5976,6 +5976,9 @@ static int brcmf_construct_chaninfo(stru
+@@ -5884,6 +5884,9 @@ static int brcmf_construct_chaninfo(stru
continue;
}
@@ -19,7 +19,7 @@ Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
/* assuming the chanspecs order is HT20,
* HT40 upper, HT40 lower, and VHT80.
*/
-@@ -6566,6 +6569,9 @@ static int brcmf_setup_wiphy(struct wiph
+@@ -6475,6 +6478,9 @@ static int brcmf_setup_wiphy(struct wiph
wiphy->bands[NL80211_BAND_5GHZ] = band;
}
}
diff --git a/package/kernel/mac80211/patches/861-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch b/package/kernel/mac80211/patches/861-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch
index 7551b7d..c7b1389 100644
--- a/package/kernel/mac80211/patches/861-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch
+++ b/package/kernel/mac80211/patches/861-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch
@@ -10,7 +10,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -663,9 +663,37 @@ static struct wireless_dev *brcmf_cfg802
+@@ -654,9 +654,37 @@ static struct wireless_dev *brcmf_cfg802
u32 *flags,
struct vif_params *params)
{
diff --git a/package/kernel/mac80211/patches/862-brcmfmac-Disable-power-management.patch b/package/kernel/mac80211/patches/862-brcmfmac-Disable-power-management.patch
index 70b8844..83bc7fe 100644
--- a/package/kernel/mac80211/patches/862-brcmfmac-Disable-power-management.patch
+++ b/package/kernel/mac80211/patches/862-brcmfmac-Disable-power-management.patch
@@ -14,7 +14,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -2782,6 +2782,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip
+@@ -2773,6 +2773,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip
* preference in cfg struct to apply this to
* FW later while initializing the dongle
*/