summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2016-01-19 10:16:04 +0000
committerJohn Crispin <john@openwrt.org>2016-01-19 10:16:04 +0000
commited72c5f846941dcca3eab1d72c48472b383752e9 (patch)
treec993281e19195b82f17834134fad51815a293843
parent9f7bbc649c09a31957b6cc7c04f5b6780712b714 (diff)
downloadmtk-20170518-ed72c5f846941dcca3eab1d72c48472b383752e9.zip
mtk-20170518-ed72c5f846941dcca3eab1d72c48472b383752e9.tar.gz
mtk-20170518-ed72c5f846941dcca3eab1d72c48472b383752e9.tar.bz2
ar71xx: add support for Netgear WPN824N
Add support for Netgear WPN824N. Hardware specs: * AR7240, 4 LAN ports, 1 WAN port * AR9285 WLAN * 32 MB RAM * 4 MB Flash * 16 LEDs (LAN, WAN and Power/Status contain two LEDs for dual color effect) * 3 Buttons (not supported) Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> SVN-Revision: 48356
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/01_leds20
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/02_network3
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rw-r--r--target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx1
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh3
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt2
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c124
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h1
-rw-r--r--target/linux/ar71xx/generic/profiles/netgear.mk10
-rw-r--r--target/linux/ar71xx/image/Makefile1
-rw-r--r--target/linux/generic/files/drivers/mtd/mtdsplit/mtdsplit_uimage.c2
12 files changed, 166 insertions, 7 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index cfb42a5..151eac2 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -684,7 +684,25 @@ wnr2000-v4)
ucidef_set_led_switch "lan3" "LAN3" "netgear:amber:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "netgear:amber:lan4" "switch0" "0x10"
ucidef_set_led_usbdev "usb" "USB" "netgear:amber:status" "1-1"
- ;;
+ ;;
+
+wpn824n)
+ ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0"
+ ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy0tpt"
+ ucidef_set_led_switch "lan1amber" "LAN1 (amber)" "netgear:amber:lan1" "switch0" "0x02"
+ ucidef_set_led_switch "lan2amber" "LAN2 (amber)" "netgear:amber:lan2" "switch0" "0x04"
+ ucidef_set_led_switch "lan3amber" "LAN3 (amber)" "netgear:amber:lan3" "switch0" "0x08"
+ ucidef_set_led_switch "lan4amber" "LAN4 (amber)" "netgear:amber:lan4" "switch0" "0x10"
+ ucidef_set_led_default "lan1green" "LAN1 (green)" "netgear:green:lan1" "0"
+ ucidef_set_led_default "lan2green" "LAN2 (green)" "netgear:green:lan2" "0"
+ ucidef_set_led_default "lan3green" "LAN3 (green)" "netgear:green:lan3" "0"
+ ucidef_set_led_default "lan4green" "LAN4 (green)" "netgear:green:lan4" "0"
+ ucidef_set_led_default "wan-green" "WAN (green)" "netgear:green:wan" "0"
+ ucidef_set_led_default "wps1" "WPS1" "netgear:blue:wps1" "0"
+ ucidef_set_led_default "wps2" "WPS2" "netgear:blue:wps2" "0"
+ ucidef_set_led_default "status" "STATUS" "netgear:amber:status" "0"
+ ucidef_set_led_default "test" "TEST" "netgear:amber:test" "0"
+ ;;
wzr-hp-ag300h)
ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 190b693..944ced3 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -227,7 +227,8 @@ wnr2000-v3 |\
wnr2000-v4 |\
wnr2200 |\
wnr612-v2 |\
-wnr1000-v2)
+wnr1000-v2 |\
+wpn824n)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4@eth1" # XXX: confirm!
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 13a0a98..c0e73ad 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -370,7 +370,8 @@ get_status_led() {
wnr2000 | \
wnr2200 |\
wnr612-v2 |\
- wnr1000-v2)
+ wnr1000-v2 |\
+ wpn824n)
status_led="netgear:green:power"
;;
wp543)
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 678482e..34d5741 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -974,6 +974,9 @@ ar71xx_board_detect() {
*"WNR1000 V2")
name="wnr1000-v2"
;;
+ *WPN824N)
+ name="wpn824n"
+ ;;
*WRT160NL)
name="wrt160nl"
;;
diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
index 38a0382..c4177e1 100644
--- a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
+++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
@@ -41,6 +41,7 @@ set_preinit_iface() {
wnr2200 |\
wnr612-v2 |\
wnr1000-v2 |\
+ wpn824n |\
wpe72)
ifname=eth1
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 1f6eaf2..0276a69 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -431,7 +431,8 @@ platform_check_image() {
wndr3700 | \
wnr2000-v3 | \
wnr612-v2 | \
- wnr1000-v2)
+ wnr1000-v2 | \
+ wpn824n)
local hw_magic
hw_magic="$(ar71xx_get_mtd_part_magic firmware)"
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index cdd4fa2..da26414 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -794,7 +794,7 @@ config ATH79_MACH_WNR2000
select ATH79_DEV_WMAC
config ATH79_MACH_WNR2000_V3
- bool "NETGEAR WNR2000 V3/WNR612 v2/WNR1000 v2 board support"
+ bool "NETGEAR WNR2000 V3/WNR612 v2/WNR1000 v2/WPN824N board support"
select SOC_AR724X
select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_ETH
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c
index 2e14782..205c2e7 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c
@@ -1,7 +1,8 @@
/*
- * NETGEAR WNR2000v3/WNR612v2/WNR1000v2 board support
+ * NETGEAR WNR2000v3/WNR612v2/WNR1000v2/WPN824N board support
*
- * Copytight (C) 2013 Mathieu Olivari <mathieu.olivari@gmail.com>
+ * Copyright (C) 2015 Hartmut Knaack <knaack.h@gmx.de>
+ * Copyright (C) 2013 Mathieu Olivari <mathieu.olivari@gmail.com>
* Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
* Copyright (C) 2008-2009 Andy Boyett <agb@openwrt.org>
@@ -15,6 +16,8 @@
#include <linux/mtd/partitions.h>
#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h> /* needed to disable switch LEDs */
+#include "common.h" /* needed to disable switch LEDs */
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
@@ -34,6 +37,29 @@
#define WNR1000V2_GPIO_LED_PWR_AMBER 1
#define WNR1000V2_GPIO_LED_PWR_GREEN 11
+/* Connected through AR7240 */
+#define WPN824N_GPIO_LED_WAN_AMBER 0
+#define WPN824N_GPIO_LED_STATUS_AMBER 1
+#define WPN824N_GPIO_LED_LAN1_AMBER 6 /* AR724X_GPIO_FUNC_JTAG_DISABLE */
+#define WPN824N_GPIO_LED_LAN2_AMBER 7 /* AR724X_GPIO_FUNC_JTAG_DISABLE */
+#define WPN824N_GPIO_LED_LAN3_AMBER 8 /* AR724X_GPIO_FUNC_JTAG_DISABLE */
+#define WPN824N_GPIO_LED_LAN4_AMBER 12
+#define WPN824N_GPIO_LED_LAN1_GREEN 13
+#define WPN824N_GPIO_LED_LAN2_GREEN 14
+#define WPN824N_GPIO_LED_LAN3_GREEN 15 /* AR724X_GPIO_FUNC_CLK_OBS3_EN */
+#define WPN824N_GPIO_LED_LAN4_GREEN 16
+#define WPN824N_GPIO_LED_WAN_GREEN 17
+
+/* Connected through AR9285 */
+#define WPN824N_WGPIO_LED_PWR_GREEN 0
+#define WPN824N_WGPIO_LED_WLAN_BLUE 1
+#define WPN824N_WGPIO_LED_WPS1_BLUE 5
+#define WPN824N_WGPIO_LED_WPS2_BLUE 9
+#define WPN824N_WGPIO_LED_TEST_AMBER 10
+#define WPN824N_WGPIO_BTN_PUSH 6 /* currently unused */
+#define WPN824N_WGPIO_BTN_RESET 7 /* currently unused */
+#define WPN824N_WGPIO_BTN_WLAN 8 /* currently unused */
+
#define WNR2000V3_KEYS_POLL_INTERVAL 20 /* msecs */
#define WNR2000V3_KEYS_DEBOUNCE_INTERVAL (3 * WNR2000V3_KEYS_POLL_INTERVAL)
@@ -73,6 +99,78 @@ static struct gpio_led wnr1000v2_leds_gpio[] __initdata = {
}
};
+static struct gpio_led wpn824n_leds_gpio[] __initdata = {
+ {
+ .name = "netgear:amber:wan",
+ .gpio = WPN824N_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "netgear:amber:status",
+ .gpio = WPN824N_GPIO_LED_STATUS_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "netgear:amber:lan1",
+ .gpio = WPN824N_GPIO_LED_LAN1_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "netgear:amber:lan2",
+ .gpio = WPN824N_GPIO_LED_LAN2_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "netgear:amber:lan3",
+ .gpio = WPN824N_GPIO_LED_LAN3_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "netgear:amber:lan4",
+ .gpio = WPN824N_GPIO_LED_LAN4_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:lan1",
+ .gpio = WPN824N_GPIO_LED_LAN1_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:lan2",
+ .gpio = WPN824N_GPIO_LED_LAN2_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:lan3",
+ .gpio = WPN824N_GPIO_LED_LAN3_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:lan4",
+ .gpio = WPN824N_GPIO_LED_LAN4_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:wan",
+ .gpio = WPN824N_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led wpn824n_wmac_leds_gpio[] = {
+ {
+ .name = "netgear:green:power",
+ .gpio = WPN824N_WGPIO_LED_PWR_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "netgear:blue:wlan",
+ .gpio = WPN824N_WGPIO_LED_WLAN_BLUE,
+ .active_low = 1,
+ }, {
+ .name = "netgear:blue:wps1",
+ .gpio = WPN824N_WGPIO_LED_WPS1_BLUE,
+ .active_low = 1,
+ }, {
+ .name = "netgear:blue:wps2",
+ .gpio = WPN824N_WGPIO_LED_WPS2_BLUE,
+ .active_low = 1,
+ }, {
+ .name = "netgear:amber:test",
+ .gpio = WPN824N_WGPIO_LED_TEST_AMBER,
+ .active_low = 1,
+ }
+};
+
static struct gpio_keys_button wnr2000v3_gpio_keys[] __initdata = {
{
.desc = "wps",
@@ -138,3 +236,25 @@ static void __init wnr1000v2_setup(void)
}
MIPS_MACHINE(ATH79_MACH_WNR1000_V2, "WNR1000V2", "NETGEAR WNR1000 V2", wnr1000v2_setup);
+
+static void __init wpn824n_setup(void)
+{
+ ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN |
+ AR724X_GPIO_FUNC_CLK_OBS3_EN);
+
+ wnr_common_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wpn824n_leds_gpio),
+ wpn824n_leds_gpio);
+
+ ap9x_pci_setup_wmac_led_pin(0, WPN824N_WGPIO_LED_WLAN_BLUE);
+ ap9x_pci_setup_wmac_leds(0, wpn824n_wmac_leds_gpio,
+ ARRAY_SIZE(wpn824n_wmac_leds_gpio));
+}
+
+MIPS_MACHINE(ATH79_MACH_WPN824N, "WPN824N", "NETGEAR WPN824N", wpn824n_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index d12829f..a170e8d 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -228,6 +228,7 @@ enum ath79_mach_type {
ATH79_MACH_WNR2200, /* NETGEAR WNR2200 */
ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */
ATH79_MACH_WNR1000_V2, /* NETGEAR WNR1000 v2 */
+ ATH79_MACH_WPN824N, /* NETGEAR WPN824N */
ATH79_MACH_WP543, /* Compex WP543 */
ATH79_MACH_WPE72, /* Compex WPE72 */
ATH79_MACH_WPJ344, /* Compex WPJ344 */
diff --git a/target/linux/ar71xx/generic/profiles/netgear.mk b/target/linux/ar71xx/generic/profiles/netgear.mk
index 16b1087..ca22a18 100644
--- a/target/linux/ar71xx/generic/profiles/netgear.mk
+++ b/target/linux/ar71xx/generic/profiles/netgear.mk
@@ -82,3 +82,13 @@ define Profile/WNR2200/Description
endef
$(eval $(call Profile,WNR2200))
+
+define Profile/WPN824N
+ NAME:=NETGEAR WPN824N
+endef
+
+define Profile/WPN824N/Description
+ Package set optimized for the NETGEAR WPN824N
+endef
+
+$(eval $(call Profile,WPN824N))
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index 1ec72dc..6483284 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -2436,6 +2436,7 @@ $(eval $(call SingleProfile,Netgear,64kraw,REALWNR612V2,wnr612v2,WNR612V2,ttyS0,
$(eval $(call SingleProfile,Netgear,64kraw,N150R,n150r,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,N150R,"",))
$(eval $(call SingleProfile,Netgear,64kraw,REALWNR1000V2,wnr1000v2,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303031,WNR1000V2,"",))
$(eval $(call SingleProfile,Netgear,64kraw,WNR1000V2_VC,wnr1000v2-vc,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303030,WNR1000V2-VC,"",))
+$(eval $(call SingleProfile,Netgear,64kraw,WPN824N,wpn824n,WPN824N,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31313030,WPN824N,"" NA,))
$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM2P,om2p,,,,OM2P))
$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5P,om5p,,,,OM5P))
diff --git a/target/linux/generic/files/drivers/mtd/mtdsplit/mtdsplit_uimage.c b/target/linux/generic/files/drivers/mtd/mtdsplit/mtdsplit_uimage.c
index 2602f98..b815869 100644
--- a/target/linux/generic/files/drivers/mtd/mtdsplit/mtdsplit_uimage.c
+++ b/target/linux/generic/files/drivers/mtd/mtdsplit/mtdsplit_uimage.c
@@ -252,6 +252,7 @@ static struct mtd_part_parser uimage_generic_parser = {
#define FW_MAGIC_WNR1000V2_VC 0x31303030
#define FW_MAGIC_WNDR3700 0x33373030
#define FW_MAGIC_WNDR3700V2 0x33373031
+#define FW_MAGIC_WPN824N 0x31313030
static ssize_t uimage_verify_wndr3700(u_char *buf, size_t len)
{
@@ -266,6 +267,7 @@ static ssize_t uimage_verify_wndr3700(u_char *buf, size_t len)
case FW_MAGIC_WNR2200:
case FW_MAGIC_WNDR3700:
case FW_MAGIC_WNDR3700V2:
+ case FW_MAGIC_WPN824N:
break;
case FW_MAGIC_WNR2000V4:
expected_type = IH_TYPE_KERNEL;