summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorGabor Juhos <juhosg@openwrt.org>2009-01-23 11:45:38 +0000
committerGabor Juhos <juhosg@openwrt.org>2009-01-23 11:45:38 +0000
commitd2100254066a577a2f495731d21c12375f350137 (patch)
tree7f487879890536c8e361d008e27a1f69e257568f
parentac2304477f7585abf097040c807b2970cc573492 (diff)
downloadmtk-20170518-d2100254066a577a2f495731d21c12375f350137.zip
mtk-20170518-d2100254066a577a2f495731d21c12375f350137.tar.gz
mtk-20170518-d2100254066a577a2f495731d21c12375f350137.tar.bz2
mac80211: update compat-wireless to 2009-01-23
SVN-Revision: 14154
-rw-r--r--[-rwxr-xr-x]package/mac80211/Makefile4
-rw-r--r--package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch4
-rw-r--r--package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch1
-rw-r--r--package/mac80211/patches/304-rt2x00-Update-copyright-year-to-2009.patch319
-rw-r--r--package/mac80211/patches/318-rt2x00-conf_tx-only-need-register-access-for-WMM.patch116
-rw-r--r--package/mac80211/patches/322-rt2x00-Add-LED_MODE_ASUS-support.patch54
-rw-r--r--package/mac80211/patches/323-rt2x00-Fix-TX-rate-short-preamble-detection.patch51
-rw-r--r--package/mac80211/patches/325-rt2x00-rt2x00_rev-should-return-u32.patch25
-rw-r--r--package/mac80211/patches/326-rt2x00-Update-chipset-ID-handling-rt2800pci.patch96
-rw-r--r--package/mac80211/patches/327-rt2x00-Add-support-for-rt3070-rt2800usb.patch683
-rw-r--r--package/mac80211/patches/329-rt2x00-Add-support-for-2-firmware-file-lengths-rt2.patch58
-rw-r--r--package/mac80211/patches/400-ath9k-restore-ath9k_platform.h.patch31
12 files changed, 867 insertions, 575 deletions
diff --git a/package/mac80211/Makefile b/package/mac80211/Makefile
index 8790e55..bb05123 100755..100644
--- a/package/mac80211/Makefile
+++ b/package/mac80211/Makefile
@@ -12,11 +12,11 @@ PKG_NAME:=mac80211
PKG_RELEASE:=1
ifneq ($(CONFIG_LINUX_2_6_27)$(CONFIG_LINUX_2_6_28),)
- PKG_VERSION:=2009-01-19
+ PKG_VERSION:=2009-01-23
PKG_SOURCE_URL:= \
http://www.orbit-lab.org/kernel/compat-wireless-2.6/2009/01 \
http://wireless.kernel.org/download/compat-wireless-2.6
- PKG_MD5SUM:=2d1cc9dacd41cdd56694c030b1865228
+ PKG_MD5SUM:=f4c8df5e077432d7018112849e36f438
else
PKG_VERSION:=2008-08-06
PKG_SOURCE_URL:=http://www.orbit-lab.org/kernel/compat-wireless-2.6/2008/08
diff --git a/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch b/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch
index a6e76bc..a218846 100644
--- a/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch
+++ b/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch
@@ -412,13 +412,13 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
#ifdef CONFIG_RT2X00_LIB_RFKILL
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
-@@ -325,6 +325,7 @@ static void rt2x00queue_create_tx_descri
+@@ -326,6 +326,7 @@ static void rt2x00queue_create_tx_descri
* Apply TX descriptor handling by components
*/
rt2x00crypto_create_tx_descriptor(entry, txdesc);
+ rt2x00ht_create_tx_descriptor(entry, txdesc, rate);
rt2x00queue_create_tx_descriptor_seq(entry, txdesc);
- rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, rate);
+ rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, hwrate);
}
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
diff --git a/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch b/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch
index 6df88d1..ed697bb 100644
--- a/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch
+++ b/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch
@@ -20,6 +20,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
5 files changed, 4606 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.c
create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.h
+
--- a/drivers/net/wireless/rt2x00/Makefile
+++ b/drivers/net/wireless/rt2x00/Makefile
@@ -16,5 +16,6 @@ obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00u
diff --git a/package/mac80211/patches/304-rt2x00-Update-copyright-year-to-2009.patch b/package/mac80211/patches/304-rt2x00-Update-copyright-year-to-2009.patch
deleted file mode 100644
index 66eb553..0000000
--- a/package/mac80211/patches/304-rt2x00-Update-copyright-year-to-2009.patch
+++ /dev/null
@@ -1,319 +0,0 @@
-From 9b9917b3acb758bb72c0e59b3f5b884ad6aec8cd Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sat, 10 Jan 2009 14:03:40 +0100
-Subject: [PATCH] rt2x00: Update copyright year to 2009
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2400pci.c | 2 +-
- drivers/net/wireless/rt2x00/rt2400pci.h | 2 +-
- drivers/net/wireless/rt2x00/rt2500pci.c | 2 +-
- drivers/net/wireless/rt2x00/rt2500pci.h | 2 +-
- drivers/net/wireless/rt2x00/rt2500usb.c | 2 +-
- drivers/net/wireless/rt2x00/rt2500usb.h | 2 +-
- drivers/net/wireless/rt2x00/rt2x00.h | 2 +-
- drivers/net/wireless/rt2x00/rt2x00config.c | 2 +-
- drivers/net/wireless/rt2x00/rt2x00crypto.c | 2 +-
- drivers/net/wireless/rt2x00/rt2x00debug.c | 2 +-
- drivers/net/wireless/rt2x00/rt2x00debug.h | 2 +-
- drivers/net/wireless/rt2x00/rt2x00dev.c | 2 +-
- drivers/net/wireless/rt2x00/rt2x00dump.h | 2 +-
- drivers/net/wireless/rt2x00/rt2x00firmware.c | 2 +-
- drivers/net/wireless/rt2x00/rt2x00leds.c | 2 +-
- drivers/net/wireless/rt2x00/rt2x00leds.h | 2 +-
- drivers/net/wireless/rt2x00/rt2x00lib.h | 2 +-
- drivers/net/wireless/rt2x00/rt2x00link.c | 2 +-
- drivers/net/wireless/rt2x00/rt2x00mac.c | 2 +-
- drivers/net/wireless/rt2x00/rt2x00pci.c | 2 +-
- drivers/net/wireless/rt2x00/rt2x00pci.h | 2 +-
- drivers/net/wireless/rt2x00/rt2x00queue.c | 2 +-
- drivers/net/wireless/rt2x00/rt2x00queue.h | 2 +-
- drivers/net/wireless/rt2x00/rt2x00reg.h | 2 +-
- drivers/net/wireless/rt2x00/rt2x00rfkill.c | 2 +-
- drivers/net/wireless/rt2x00/rt2x00usb.c | 2 +-
- drivers/net/wireless/rt2x00/rt2x00usb.h | 2 +-
- drivers/net/wireless/rt2x00/rt61pci.c | 2 +-
- drivers/net/wireless/rt2x00/rt61pci.h | 2 +-
- drivers/net/wireless/rt2x00/rt73usb.c | 2 +-
- drivers/net/wireless/rt2x00/rt73usb.h | 2 +-
- 31 files changed, 31 insertions(+), 31 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2400pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2400pci.h
-+++ b/drivers/net/wireless/rt2x00/rt2400pci.h
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2500pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2500pci.h
-+++ b/drivers/net/wireless/rt2x00/rt2500pci.h
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2500usb.c
-+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2500usb.h
-+++ b/drivers/net/wireless/rt2x00/rt2500usb.h
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00.h
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00config.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00crypto.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00debug.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00debug.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00debug.h
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00dump.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00dump.h
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00firmware.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00firmware.c
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00leds.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00leds.c
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00leds.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00leds.h
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00lib.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00link.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00link.c
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00mac.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00pci.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00pci.h
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00queue.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00queue.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00reg.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00usb.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt2x00usb.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt61pci.c
-+++ b/drivers/net/wireless/rt2x00/rt61pci.c
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt61pci.h
-+++ b/drivers/net/wireless/rt2x00/rt61pci.h
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt73usb.c
-+++ b/drivers/net/wireless/rt2x00/rt73usb.c
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
---- a/drivers/net/wireless/rt2x00/rt73usb.h
-+++ b/drivers/net/wireless/rt2x00/rt73usb.h
-@@ -1,5 +1,5 @@
- /*
-- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
diff --git a/package/mac80211/patches/318-rt2x00-conf_tx-only-need-register-access-for-WMM.patch b/package/mac80211/patches/318-rt2x00-conf_tx-only-need-register-access-for-WMM.patch
deleted file mode 100644
index c454165..0000000
--- a/package/mac80211/patches/318-rt2x00-conf_tx-only-need-register-access-for-WMM.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From bbb27190d504b453625d1a663124b2b1cec0fe8b Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sat, 17 Jan 2009 20:25:27 +0100
-Subject: [PATCH] rt2x00: conf_tx() only need register access for WMM queues
-
-conf_tx() in rt61pci and rt73usb only have to check once
-if the queue_idx indicates a non-WMM queue and break of
-the function immediately if that is the case.
-
-Only the WMM queues need to have the TX configuration written
-to the registers.
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt61pci.c | 30 +++++++++++++++---------------
- drivers/net/wireless/rt2x00/rt73usb.c | 30 +++++++++++++++---------------
- 2 files changed, 30 insertions(+), 30 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt61pci.c
-+++ b/drivers/net/wireless/rt2x00/rt61pci.c
-@@ -2657,6 +2657,7 @@ static int rt61pci_conf_tx(struct ieee80
- struct rt2x00_field32 field;
- int retval;
- u32 reg;
-+ u32 offset;
-
- /*
- * First pass the configuration through rt2x00lib, that will
-@@ -2668,24 +2669,23 @@ static int rt61pci_conf_tx(struct ieee80
- if (retval)
- return retval;
-
-+ /*
-+ * We only need to perform additional register initialization
-+ * for WMM queues/
-+ */
-+ if (queue_idx >= 4)
-+ return 0;
-+
- queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
-
- /* Update WMM TXOP register */
-- if (queue_idx < 2) {
-- field.bit_offset = queue_idx * 16;
-- field.bit_mask = 0xffff << field.bit_offset;
--
-- rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR0, &reg);
-- rt2x00_set_field32(&reg, field, queue->txop);
-- rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
-- } else if (queue_idx < 4) {
-- field.bit_offset = (queue_idx - 2) * 16;
-- field.bit_mask = 0xffff << field.bit_offset;
--
-- rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR1, &reg);
-- rt2x00_set_field32(&reg, field, queue->txop);
-- rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
-- }
-+ offset = AC_TXOP_CSR0 + (sizeof(u32) * (!!(queue_idx & 2)));
-+ field.bit_offset = (queue_idx & 1) * 16;
-+ field.bit_mask = 0xffff << field.bit_offset;
-+
-+ rt2x00pci_register_read(rt2x00dev, offset, &reg);
-+ rt2x00_set_field32(&reg, field, queue->txop);
-+ rt2x00pci_register_write(rt2x00dev, offset, reg);
-
- /* Update WMM registers */
- field.bit_offset = queue_idx * 4;
---- a/drivers/net/wireless/rt2x00/rt73usb.c
-+++ b/drivers/net/wireless/rt2x00/rt73usb.c
-@@ -2180,6 +2180,7 @@ static int rt73usb_conf_tx(struct ieee80
- struct rt2x00_field32 field;
- int retval;
- u32 reg;
-+ u32 offset;
-
- /*
- * First pass the configuration through rt2x00lib, that will
-@@ -2191,24 +2192,23 @@ static int rt73usb_conf_tx(struct ieee80
- if (retval)
- return retval;
-
-+ /*
-+ * We only need to perform additional register initialization
-+ * for WMM queues/
-+ */
-+ if (queue_idx >= 4)
-+ return 0;
-+
- queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
-
- /* Update WMM TXOP register */
-- if (queue_idx < 2) {
-- field.bit_offset = queue_idx * 16;
-- field.bit_mask = 0xffff << field.bit_offset;
--
-- rt2x00usb_register_read(rt2x00dev, AC_TXOP_CSR0, &reg);
-- rt2x00_set_field32(&reg, field, queue->txop);
-- rt2x00usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
-- } else if (queue_idx < 4) {
-- field.bit_offset = (queue_idx - 2) * 16;
-- field.bit_mask = 0xffff << field.bit_offset;
--
-- rt2x00usb_register_read(rt2x00dev, AC_TXOP_CSR1, &reg);
-- rt2x00_set_field32(&reg, field, queue->txop);
-- rt2x00usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
-- }
-+ offset = AC_TXOP_CSR0 + (sizeof(u32) * (!!(queue_idx & 2)));
-+ field.bit_offset = (queue_idx & 1) * 16;
-+ field.bit_mask = 0xffff << field.bit_offset;
-+
-+ rt2x00usb_register_read(rt2x00dev, offset, &reg);
-+ rt2x00_set_field32(&reg, field, queue->txop);
-+ rt2x00usb_register_write(rt2x00dev, offset, reg);
-
- /* Update WMM registers */
- field.bit_offset = queue_idx * 4;
diff --git a/package/mac80211/patches/322-rt2x00-Add-LED_MODE_ASUS-support.patch b/package/mac80211/patches/322-rt2x00-Add-LED_MODE_ASUS-support.patch
deleted file mode 100644
index c19edd9..0000000
--- a/package/mac80211/patches/322-rt2x00-Add-LED_MODE_ASUS-support.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From ac8402781662b40a9f69bc33a3ec20292331e940 Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sat, 17 Jan 2009 20:36:44 +0100
-Subject: [PATCH] rt2x00: Add LED_MODE_ASUS support
-
-When the led mode is asus, the activity led mode must
-be registered otherwise the second LED will not be enabled.
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2400pci.c | 4 +++-
- drivers/net/wireless/rt2x00/rt2500pci.c | 4 +++-
- drivers/net/wireless/rt2x00/rt2500usb.c | 4 +++-
- 3 files changed, 9 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2400pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
-@@ -1395,7 +1395,9 @@ static int rt2400pci_init_eeprom(struct
- value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
-
- rt2400pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
-- if (value == LED_MODE_TXRX_ACTIVITY || value == LED_MODE_DEFAULT)
-+ if (value == LED_MODE_TXRX_ACTIVITY ||
-+ value == LED_MODE_DEFAULT ||
-+ value == LED_MODE_ASUS)
- rt2400pci_init_led(rt2x00dev, &rt2x00dev->led_qual,
- LED_TYPE_ACTIVITY);
- #endif /* CONFIG_RT2X00_LIB_LEDS */
---- a/drivers/net/wireless/rt2x00/rt2500pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
-@@ -1552,7 +1552,9 @@ static int rt2500pci_init_eeprom(struct
- value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
-
- rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
-- if (value == LED_MODE_TXRX_ACTIVITY || value == LED_MODE_DEFAULT)
-+ if (value == LED_MODE_TXRX_ACTIVITY ||
-+ value == LED_MODE_DEFAULT ||
-+ value == LED_MODE_ASUS)
- rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_qual,
- LED_TYPE_ACTIVITY);
- #endif /* CONFIG_RT2X00_LIB_LEDS */
---- a/drivers/net/wireless/rt2x00/rt2500usb.c
-+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
-@@ -1603,7 +1603,9 @@ static int rt2500usb_init_eeprom(struct
- value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
-
- rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
-- if (value == LED_MODE_TXRX_ACTIVITY || value == LED_MODE_DEFAULT)
-+ if (value == LED_MODE_TXRX_ACTIVITY ||
-+ value == LED_MODE_DEFAULT ||
-+ value == LED_MODE_ASUS)
- rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_qual,
- LED_TYPE_ACTIVITY);
- #endif /* CONFIG_RT2X00_LIB_LEDS */
diff --git a/package/mac80211/patches/323-rt2x00-Fix-TX-rate-short-preamble-detection.patch b/package/mac80211/patches/323-rt2x00-Fix-TX-rate-short-preamble-detection.patch
deleted file mode 100644
index 712dea6..0000000
--- a/package/mac80211/patches/323-rt2x00-Fix-TX-rate-short-preamble-detection.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 4f9ea5700c714afce77e410d1c0c114c42d5a910 Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sun, 18 Jan 2009 20:17:10 +0100
-Subject: [PATCH] rt2x00: Fix TX rate short preamble detection
-
-Mac80211 provides 2 structures to handle bitrates, namely
-ieee80211_rate and ieee80211_tx_rate. To determine the short preamble
-mode for an outgoing frame, the flag IEEE80211_TX_RC_USE_SHORT_PREAMBLE
-must be checked on ieee80211_tx_rate and not ieee80211_rate (which rt2x00 did).
-
-This fixes a regression which was triggered in 2.6.29-rcX as reported by Chris Clayton.
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2x00queue.c | 9 +++++----
- 1 files changed, 5 insertions(+), 4 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2x00queue.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
-@@ -186,10 +186,11 @@ static void rt2x00queue_create_tx_descri
-
- static void rt2x00queue_create_tx_descriptor_plcp(struct queue_entry *entry,
- struct txentry_desc *txdesc,
-- struct ieee80211_rate *rate)
-+ const struct rt2x00_rate *hwrate)
- {
- struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-- const struct rt2x00_rate *hwrate = rt2x00_get_rate(rate->hw_value);
-+ struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
-+ struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0];
- unsigned int data_length;
- unsigned int duration;
- unsigned int residual;
-@@ -232,7 +233,7 @@ static void rt2x00queue_create_tx_descri
- * When preamble is enabled we should set the
- * preamble bit for the signal.
- */
-- if (rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
-+ if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
- txdesc->signal |= 0x08;
- }
- }
-@@ -327,7 +328,7 @@ static void rt2x00queue_create_tx_descri
- rt2x00crypto_create_tx_descriptor(entry, txdesc);
- rt2x00ht_create_tx_descriptor(entry, txdesc, rate);
- rt2x00queue_create_tx_descriptor_seq(entry, txdesc);
-- rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, rate);
-+ rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, hwrate);
- }
-
- static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry,
diff --git a/package/mac80211/patches/325-rt2x00-rt2x00_rev-should-return-u32.patch b/package/mac80211/patches/325-rt2x00-rt2x00_rev-should-return-u32.patch
new file mode 100644
index 0000000..0a14d9f
--- /dev/null
+++ b/package/mac80211/patches/325-rt2x00-rt2x00_rev-should-return-u32.patch
@@ -0,0 +1,25 @@
+From 3dc31edfe4bad6048f097cd4a088499500db9a2e Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Thu, 22 Jan 2009 21:01:56 +0100
+Subject: [PATCH] rt2x00: rt2x00_rev() should return u32
+
+The "rev" field in chipset definition is an u32,
+which means that rt2x00_rev() which returns that field
+should be of the same type.
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2x00.h | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/rt2x00/rt2x00.h
+@@ -878,7 +878,7 @@ static inline char rt2x00_rf(const struc
+ return (chipset->rf == chip);
+ }
+
+-static inline u16 rt2x00_rev(const struct rt2x00_chip *chipset)
++static inline u32 rt2x00_rev(const struct rt2x00_chip *chipset)
+ {
+ return chipset->rev;
+ }
diff --git a/package/mac80211/patches/326-rt2x00-Update-chipset-ID-handling-rt2800pci.patch b/package/mac80211/patches/326-rt2x00-Update-chipset-ID-handling-rt2800pci.patch
new file mode 100644
index 0000000..284ba04
--- /dev/null
+++ b/package/mac80211/patches/326-rt2x00-Update-chipset-ID-handling-rt2800pci.patch
@@ -0,0 +1,96 @@
+From d2216933a12c38ab23ee1170c1c143002a825046 Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Thu, 22 Jan 2009 21:16:08 +0100
+Subject: [PATCH] rt2x00: Update chipset ID handling (rt2800pci)
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2800pci.c | 22 ++++++++++++++++------
+ drivers/net/wireless/rt2x00/rt2800pci.h | 8 +++++---
+ 2 files changed, 21 insertions(+), 9 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800pci.c
++++ b/drivers/net/wireless/rt2x00/rt2800pci.c
+@@ -984,7 +984,7 @@ static void rt2800pci_reset_tuner(struct
+ static void rt2800pci_link_tuner(struct rt2x00_dev *rt2x00dev,
+ struct link_qual *qual, const u32 count)
+ {
+- if (rt2x00_rev(&rt2x00dev->chip) == RT2860_VERSION_C)
++ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION)
+ return;
+
+ /*
+@@ -1272,7 +1272,11 @@ static int rt2800pci_init_registers(stru
+
+ rt2x00pci_register_read(rt2x00dev, MAX_LEN_CFG, &reg);
+ rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
+- rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 1);
++ if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION &&
++ rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION)
++ rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 2);
++ else
++ rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 1);
+ rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_PSDU, 0);
+ rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_MPDU, 0);
+ rt2x00pci_register_write(rt2x00dev, MAX_LEN_CFG, reg);
+@@ -1523,12 +1527,12 @@ static int rt2800pci_init_bbp(struct rt2
+ rt2800pci_bbp_write(rt2x00dev, 103, 0x00);
+ rt2800pci_bbp_write(rt2x00dev, 105, 0x05);
+
+- if (rt2x00_rev(&rt2x00dev->chip) == RT2860_VERSION_C) {
++ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+ rt2800pci_bbp_write(rt2x00dev, 69, 0x16);
+ rt2800pci_bbp_write(rt2x00dev, 73, 0x12);
+ }
+
+- if (rt2x00_rev(&rt2x00dev->chip) == RT2860_VERSION_D)
++ if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION)
+ rt2800pci_bbp_write(rt2x00dev, 84, 0x19);
+
+ for (i = 0; i < EEPROM_BBP_SIZE; i++) {
+@@ -1637,6 +1641,11 @@ static int rt2800pci_enable_radio(struct
+ /*
+ * Enable RX.
+ */
++ rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
++ rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
++ rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 0);
++ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
++
+ rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1);
+@@ -2253,13 +2262,14 @@ static int rt2800pci_init_eeprom(struct
+ PCI_CONFIG_HEADER_DEVICE, &device);
+ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
+ rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
+- reg = rt2x00_get_field32(reg, MAC_CSR0_ASIC_REV);
+ rt2x00_set_chip(rt2x00dev, device, value, reg);
+
+ if (!rt2x00_rf(&rt2x00dev->chip, RF2820) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF2850) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF2720) &&
+- !rt2x00_rf(&rt2x00dev->chip, RF2750)) {
++ !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
++ !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
++ !rt2x00_rf(&rt2x00dev->chip, RF2020)) {
+ ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
+ return -ENODEV;
+ }
+--- a/drivers/net/wireless/rt2x00/rt2800pci.h
++++ b/drivers/net/wireless/rt2x00/rt2800pci.h
+@@ -47,9 +47,11 @@
+ /*
+ * RT2860 version
+ */
+-#define RT2860_VERSION_C 0x0100
+-#define RT2860_VERSION_D 0x0101
+-#define RT2860_VERSION_E 0x0200
++#define RT2860C_VERSION 0x28600100
++#define RT2860D_VERSION 0x28600101
++#define RT2880E_VERSION 0x28720200
++#define RT2883_VERSION 0x28830300
++#define RT3070_VERSION 0x30700200
+
+ /*
+ * Signal information.
diff --git a/package/mac80211/patches/327-rt2x00-Add-support-for-rt3070-rt2800usb.patch b/package/mac80211/patches/327-rt2x00-Add-support-for-rt3070-rt2800usb.patch
new file mode 100644
index 0000000..e92bcd2
--- /dev/null
+++ b/package/mac80211/patches/327-rt2x00-Add-support-for-rt3070-rt2800usb.patch
@@ -0,0 +1,683 @@
+From 84706fce3026650c49c6290e0e6525b45795027c Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Thu, 22 Jan 2009 21:16:46 +0100
+Subject: [PATCH] rt2x00: Add support for rt3070 (rt2800usb)
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2800usb.c | 384 +++++++++++++++++++++++++++----
+ drivers/net/wireless/rt2x00/rt2800usb.h | 57 +++++-
+ drivers/net/wireless/rt2x00/rt2x00.h | 6 +
+ 3 files changed, 404 insertions(+), 43 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800usb.c
++++ b/drivers/net/wireless/rt2x00/rt2800usb.c
+@@ -59,6 +59,8 @@ MODULE_PARM_DESC(nohwcrypt, "Disable har
+ */
+ #define WAIT_FOR_BBP(__dev, __reg) \
+ rt2x00usb_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
++#define WAIT_FOR_RFCSR(__dev, __reg) \
++ rt2x00usb_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
+ #define WAIT_FOR_RF(__dev, __reg) \
+ rt2x00usb_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
+ #define WAIT_FOR_MCU(__dev, __reg) \
+@@ -120,6 +122,61 @@ static void rt2800usb_bbp_read(struct rt
+ mutex_unlock(&rt2x00dev->csr_mutex);
+ }
+
++static void rt2800usb_rfcsr_write(struct rt2x00_dev *rt2x00dev,
++ const unsigned int word, const u8 value)
++{
++ u32 reg;
++
++ mutex_lock(&rt2x00dev->csr_mutex);
++
++ /*
++ * Wait until the RFCSR becomes available, afterwards we
++ * can safely write the new data into the register.
++ */
++ if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
++ reg = 0;
++ rt2x00_set_field32(&reg, RF_CSR_CFG_DATA, value);
++ rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
++ rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 1);
++ rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
++
++ rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
++ }
++
++ mutex_unlock(&rt2x00dev->csr_mutex);
++}
++
++static void rt2800usb_rfcsr_read(struct rt2x00_dev *rt2x00dev,
++ const unsigned int word, u8 *value)
++{
++ u32 reg;
++
++ mutex_lock(&rt2x00dev->csr_mutex);
++
++ /*
++ * Wait until the RFCSR becomes available, afterwards we
++ * can safely write the read request into the register.
++ * After the data has been written, we wait until hardware
++ * returns the correct value, if at any time the register
++ * doesn't become available in time, reg will be 0xffffffff
++ * which means we return 0xff to the caller.
++ */
++ if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
++ reg = 0;
++ rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
++ rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 0);
++ rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
++
++ rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
++
++ WAIT_FOR_RFCSR(rt2x00dev, &reg);
++ }
++
++ *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
++
++ mutex_unlock(&rt2x00dev->csr_mutex);
++}
++
+ static void rt2800usb_rf_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, const u32 value)
+ {
+@@ -635,42 +692,24 @@ static void rt2800usb_config_lna_gain(st
+ rt2x00dev->lna_gain = lna_gain;
+ }
+
+-static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev,
+- struct rf_channel *rf,
+- struct channel_info *info)
++static void rt2800usb_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
++ struct rf_channel *rf,
++ struct channel_info *info)
+ {
+- u32 reg;
+- unsigned int tx_pin;
+ u16 eeprom;
+
+- tx_pin = 0;
+- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
+- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
+- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
+- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
+- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
+- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
+- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
+-
+ rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
+
+ /*
+ * Determine antenna settings from EEPROM
+ */
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
+- if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) {
++ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1)
+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
+- /* Turn off unused PA or LNA when only 1T or 1R */
+- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 0);
+- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 0);
+- }
+
+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) {
+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
+- /* Turn off unused PA or LNA when only 1T or 1R */
+- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 0);
+- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 0);
+ } else if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 2)
+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
+
+@@ -698,15 +737,11 @@ static void rt2800usb_config_channel(str
+
+ rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A,
+ TXPOWER_A_TO_DEV(info->tx_power2));
+-
+- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, 1);
+ } else {
+ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G,
+ TXPOWER_G_TO_DEV(info->tx_power1));
+ rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G,
+ TXPOWER_G_TO_DEV(info->tx_power2));
+-
+- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1);
+ }
+
+ rt2x00_set_field32(&rf->rf4, RF4_BW40,
+@@ -730,6 +765,81 @@ static void rt2800usb_config_channel(str
+ rt2800usb_rf_write(rt2x00dev, 2, rf->rf2);
+ rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
+ rt2800usb_rf_write(rt2x00dev, 4, rf->rf4);
++}
++
++static void rt2800usb_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
++ struct rf_channel *rf,
++ struct channel_info *info)
++{
++ u8 rfcsr;
++
++ rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf1);
++ rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf3);
++
++ rt2800usb_rfcsr_read(rt2x00dev, 6, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
++ rt2800usb_rfcsr_write(rt2x00dev, 6, rfcsr);
++
++ rt2800usb_rfcsr_read(rt2x00dev, 12, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
++ TXPOWER_G_TO_DEV(info->tx_power1));
++ rt2800usb_rfcsr_write(rt2x00dev, 12, rfcsr);
++
++ rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
++ rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr);
++
++ if (test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
++ rt2800usb_rfcsr_write(rt2x00dev, 24, rt2x00dev->calibration_bw40);
++ else
++ rt2800usb_rfcsr_write(rt2x00dev, 24, rt2x00dev->calibration_bw20);
++
++ rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
++ rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr);
++}
++
++static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev,
++ struct rf_channel *rf,
++ struct channel_info *info)
++{
++ u32 reg;
++ unsigned int tx_pin;
++ u16 eeprom;
++
++ if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
++ rt2800usb_config_channel_rt2x(rt2x00dev, rf, info);
++ else
++ rt2800usb_config_channel_rt3x(rt2x00dev, rf, info);
++
++ tx_pin = 0;
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
++
++ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
++
++ /* Turn off unused PA or LNA when only 1T or 1R */
++ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) {
++
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 0);
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 0);
++ }
++
++ /* Turn off unused PA or LNA when only 1T or 1R */
++ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) {
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 0);
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 0);
++ }
++
++ if (rf->channel > 14)
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, 1);
++ else
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1);
+
+ /*
+ * Change BBP settings
+@@ -935,8 +1045,12 @@ static void rt2800usb_link_stats(struct
+
+ static u8 rt2800usb_get_default_vgc(struct rt2x00_dev *rt2x00dev)
+ {
+- if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ)
+- return 0x2e + rt2x00dev->lna_gain;
++ if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
++ if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION)
++ return 0x1c + (2 * rt2x00dev->lna_gain);
++ else
++ return 0x2e + rt2x00dev->lna_gain;
++ }
+
+ if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
+ return 0x32 + (rt2x00dev->lna_gain * 5) / 3;
+@@ -964,7 +1078,7 @@ static void rt2800usb_reset_tuner(struct
+ static void rt2800usb_link_tuner(struct rt2x00_dev *rt2x00dev,
+ struct link_qual *qual, const u32 count)
+ {
+- if (rt2x00_rev(&rt2x00dev->chip) == RT2870_VERSION_C)
++ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION)
+ return;
+
+ /*
+@@ -1145,8 +1259,14 @@ static int rt2800usb_init_registers(stru
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
+ rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
+- rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00040a06);
+- rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
++ if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
++ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
++ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
++ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
++ } else {
++ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00040a06);
++ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
++ }
+
+ rt2x00usb_register_read(rt2x00dev, TX_LINK_CFG, &reg);
+ rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32);
+@@ -1166,7 +1286,11 @@ static int rt2800usb_init_registers(stru
+
+ rt2x00usb_register_read(rt2x00dev, MAX_LEN_CFG, &reg);
+ rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
+- rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 1);
++ if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION &&
++ rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION)
++ rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 2);
++ else
++ rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 1);
+ rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_PSDU, 0);
+ rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_MPDU, 0);
+ rt2x00usb_register_write(rt2x00dev, MAX_LEN_CFG, reg);
+@@ -1427,13 +1551,16 @@ static int rt2800usb_init_bbp(struct rt2
+ rt2800usb_bbp_write(rt2x00dev, 103, 0x00);
+ rt2800usb_bbp_write(rt2x00dev, 105, 0x05);
+
+- if (rt2x00_rev(&rt2x00dev->chip) == RT2870_VERSION_C) {
++ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+ rt2800usb_bbp_write(rt2x00dev, 69, 0x16);
+ rt2800usb_bbp_write(rt2x00dev, 73, 0x12);
+ }
+
+- if (rt2x00_rev(&rt2x00dev->chip) != RT2870_VERSION_D)
+- rt2800usb_bbp_write(rt2x00dev, 84, 0x19);
++ if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
++ rt2800usb_bbp_write(rt2x00dev, 70, 0x0a);
++ rt2800usb_bbp_write(rt2x00dev, 84, 0x99);
++ rt2800usb_bbp_write(rt2x00dev, 105, 0x05);
++ }
+
+ for (i = 0; i < EEPROM_BBP_SIZE; i++) {
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
+@@ -1448,6 +1575,134 @@ static int rt2800usb_init_bbp(struct rt2
+ return 0;
+ }
+
++static u8 rt2800usb_init_rx_filter(struct rt2x00_dev *rt2x00dev,
++ bool bw40, u8 rfcsr24, u8 filter_target)
++{
++ unsigned int i;
++ u8 bbp;
++ u8 rfcsr;
++ u8 passband;
++ u8 stopband;
++ u8 overtuned = 0;
++
++ rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
++
++ if (bw40) {
++ rt2800usb_bbp_read(rt2x00dev, 4, &bbp);
++ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0x10);
++ rt2800usb_bbp_write(rt2x00dev, 4, bbp);
++ }
++
++ rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
++ rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr);
++
++ /*
++ * Set power & frequency of passband test tone
++ */
++ rt2800usb_bbp_write(rt2x00dev, 24, 0);
++
++ for (i = 0; i < 100; i++) {
++ rt2800usb_bbp_write(rt2x00dev, 25, 0x90);
++ msleep(1);
++
++ rt2800usb_bbp_read(rt2x00dev, 55, &passband);
++ if (passband)
++ break;
++ }
++
++ /*
++ * Set power & frequency of stopband test tone
++ */
++ rt2800usb_bbp_write(rt2x00dev, 24, 0x06);
++
++ for (i = 0; i < 100; i++) {
++ rt2800usb_bbp_write(rt2x00dev, 25, 0x90);
++ msleep(1);
++
++ rt2800usb_bbp_read(rt2x00dev, 55, &stopband);
++
++ if ((passband - stopband) <= filter_target) {
++ rfcsr24++;
++ overtuned += ((passband - stopband) == filter_target);
++ } else
++ break;
++
++ rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
++ }
++
++ rfcsr24 -= !!overtuned;
++
++ rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
++ return rfcsr24;
++}
++
++static int rt2800usb_init_rfcsr(struct rt2x00_dev *rt2x00dev)
++{
++ u8 rfcsr;
++ u8 bbp;
++
++ if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
++ return 0;
++
++ /*
++ * Init RF calibration.
++ */
++ rt2800usb_rfcsr_read(rt2x00dev, 30, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
++ rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr);
++ msleep(1);
++ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
++ rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr);
++
++ rt2800usb_rfcsr_write(rt2x00dev, 4, 0x40);
++ rt2800usb_rfcsr_write(rt2x00dev, 5, 0x03);
++ rt2800usb_rfcsr_write(rt2x00dev, 6, 0x02);
++ rt2800usb_rfcsr_write(rt2x00dev, 7, 0x70);
++ rt2800usb_rfcsr_write(rt2x00dev, 9, 0x0f);
++ rt2800usb_rfcsr_write(rt2x00dev, 10, 0x71);
++ rt2800usb_rfcsr_write(rt2x00dev, 11, 0x21);
++ rt2800usb_rfcsr_write(rt2x00dev, 12, 0x7b);
++ rt2800usb_rfcsr_write(rt2x00dev, 14, 0x90);
++ rt2800usb_rfcsr_write(rt2x00dev, 15, 0x58);
++ rt2800usb_rfcsr_write(rt2x00dev, 16, 0xb3);
++ rt2800usb_rfcsr_write(rt2x00dev, 17, 0x92);
++ rt2800usb_rfcsr_write(rt2x00dev, 18, 0x2c);
++ rt2800usb_rfcsr_write(rt2x00dev, 19, 0x02);
++ rt2800usb_rfcsr_write(rt2x00dev, 20, 0xba);
++ rt2800usb_rfcsr_write(rt2x00dev, 21, 0xdb);
++ rt2800usb_rfcsr_write(rt2x00dev, 24, 0x16);
++ rt2800usb_rfcsr_write(rt2x00dev, 25, 0x01);
++ rt2800usb_rfcsr_write(rt2x00dev, 27, 0x03);
++ rt2800usb_rfcsr_write(rt2x00dev, 29, 0x1f);
++
++ /*
++ * Set RX Filter calibration for 20MHz and 40MHz
++ */
++ rt2x00dev->calibration_bw20 =
++ rt2800usb_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
++ rt2x00dev->calibration_bw40 =
++ rt2800usb_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
++
++ /*
++ * Set back to initial state
++ */
++ rt2800usb_bbp_write(rt2x00dev, 24, 0);
++
++ rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
++ rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr);
++
++ /*
++ * set BBP back to BW20
++ */
++ rt2800usb_bbp_read(rt2x00dev, 4, &bbp);
++ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
++ rt2800usb_bbp_write(rt2x00dev, 4, bbp);
++
++ return 0;
++}
++
+ /*
+ * Device state switch handlers.
+ */
+@@ -1491,7 +1746,8 @@ static int rt2800usb_enable_radio(struct
+ */
+ if (unlikely(rt2800usb_wait_wpdma_ready(rt2x00dev) ||
+ rt2800usb_init_registers(rt2x00dev) ||
+- rt2800usb_init_bbp(rt2x00dev)))
++ rt2800usb_init_bbp(rt2x00dev) ||
++ rt2800usb_init_rfcsr(rt2x00dev)))
+ return -EIO;
+
+ rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+@@ -1982,7 +2238,6 @@ static int rt2800usb_validate_eeprom(str
+ static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
+ {
+ u32 reg;
+- u16 rev;
+ u16 value;
+ u16 eeprom;
+
+@@ -1996,8 +2251,7 @@ static int rt2800usb_init_eeprom(struct
+ */
+ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
+ rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
+- rev = rt2x00_get_field32(reg, MAC_CSR0_ASIC_REV);
+- rt2x00_set_chip(rt2x00dev, RT2870, value, rev);
++ rt2x00_set_chip(rt2x00dev, RT2870, value, reg);
+
+ /*
+ * The check for rt2860 is not a typo, some rt2870 hardware
+@@ -2012,7 +2266,9 @@ static int rt2800usb_init_eeprom(struct
+ if (!rt2x00_rf(&rt2x00dev->chip, RF2820) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF2850) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF2720) &&
+- !rt2x00_rf(&rt2x00dev->chip, RF2750)) {
++ !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
++ !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
++ !rt2x00_rf(&rt2x00dev->chip, RF2020)) {
+ ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
+ return -ENODEV;
+ }
+@@ -2127,6 +2383,27 @@ static const struct rf_channel rf_vals[]
+ { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 },
+ };
+
++/*
++ * RF value list for rt3070
++ * Supports: 2.4 GHz
++ */
++static const struct rf_channel rf_vals_3070[] = {
++ {1, 241, 2, 2 },
++ {2, 241, 2, 7 },
++ {3, 242, 2, 2 },
++ {4, 242, 2, 7 },
++ {5, 243, 2, 2 },
++ {6, 243, 2, 7 },
++ {7, 244, 2, 2 },
++ {8, 244, 2, 7 },
++ {9, 245, 2, 2 },
++ {10, 245, 2, 7 },
++ {11, 246, 2, 2 },
++ {12, 246, 2, 7 },
++ {13, 247, 2, 2 },
++ {14, 248, 2, 4 },
++};
++
+ static int rt2800usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+ {
+ struct hw_mode_spec *spec = &rt2x00dev->spec;
+@@ -2184,6 +2461,10 @@ static int rt2800usb_probe_hw_mode(struc
+ spec->supported_bands |= SUPPORT_BAND_5GHZ;
+ spec->num_channels = ARRAY_SIZE(rf_vals);
+ spec->channels = rf_vals;
++ } else if (rt2x00_rf(&rt2x00dev->chip, RF3020) ||
++ rt2x00_rf(&rt2x00dev->chip, RF2020)) {
++ spec->num_channels = ARRAY_SIZE(rf_vals_3070);
++ spec->channels = rf_vals_3070;
+ }
+
+ /*
+@@ -2473,6 +2754,12 @@ static const struct rt2x00_ops rt2800usb
+ * rt2800usb module information.
+ */
+ static struct usb_device_id rt2800usb_device_table[] = {
++ /* Abocom */
++ { USB_DEVICE(0x07b8, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x07b8, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x07b8, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x07b8, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x1482, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Amit */
+ { USB_DEVICE(0x15c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* ASUS */
+@@ -2483,9 +2770,12 @@ static struct usb_device_id rt2800usb_de
+ { USB_DEVICE(0x13d3, 0x3247), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Belkin */
+ { USB_DEVICE(0x050d, 0x8053), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x050d, 0x805c), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Conceptronic */
+ { USB_DEVICE(0x14b2, 0x3c06), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x14b2, 0x3c07), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x14b2, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x14b2, 0x3c12), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x14b2, 0x3c23), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x14b2, 0x3c25), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x14b2, 0x3c27), USB_DEVICE_DATA(&rt2800usb_ops) },
+@@ -2494,9 +2784,12 @@ static struct usb_device_id rt2800usb_de
+ { USB_DEVICE(0x07aa, 0x002f), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07aa, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07aa, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x18c5, 0x0012), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* D-Link */
+ { USB_DEVICE(0x07d1, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07d1, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) },
++ /* Edimax */
++ { USB_DEVICE(0x7392, 0x7711), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* EnGenius */
+ { USB_DEVICE(0X1740, 0x9701), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1740, 0x9702), USB_DEVICE_DATA(&rt2800usb_ops) },
+@@ -2507,13 +2800,21 @@ static struct usb_device_id rt2800usb_de
+ { USB_DEVICE(0x0e66, 0x0003), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Linksys */
+ { USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) },
++ /* Logitec */
++ { USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x0789, 0x0164), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Philips */
+ { USB_DEVICE(0x0471, 0x200f), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Planex */
+ { USB_DEVICE(0x2019, 0xed06), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x2019, 0xab25), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Ralink */
+ { USB_DEVICE(0x148f, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x148f, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x148f, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
++ /* Samsung */
++ { USB_DEVICE(0x04e8, 0x2018), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Siemens */
+ { USB_DEVICE(0x129b, 0x1828), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Sitecom */
+@@ -2533,6 +2834,9 @@ static struct usb_device_id rt2800usb_de
+ /* ZCOM */
+ { USB_DEVICE(0x0cde, 0x0022), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0cde, 0x0025), USB_DEVICE_DATA(&rt2800usb_ops) },
++ /* Zinwell */
++ { USB_DEVICE(0x5a57, 0x0280), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x5a57, 0x0282), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Zyxel */
+ { USB_DEVICE(0x0586, 0x3416), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { 0, }
+--- a/drivers/net/wireless/rt2x00/rt2800usb.h
++++ b/drivers/net/wireless/rt2x00/rt2800usb.h
+@@ -47,9 +47,11 @@
+ /*
+ * RT2870 version
+ */
+-#define RT2870_VERSION_C 0x0100
+-#define RT2870_VERSION_D 0x0101
+-#define RT2870_VERSION_E 0x0200
++#define RT2860C_VERSION 0x28600100
++#define RT2860D_VERSION 0x28600101
++#define RT2880E_VERSION 0x28720200
++#define RT2883_VERSION 0x28830300
++#define RT3070_VERSION 0x30700200
+
+ /*
+ * Signal information.
+@@ -383,6 +385,15 @@
+ #define PBF_DBG 0x043c
+
+ /*
++ * RF registers
++ */
++#define RF_CSR_CFG 0x0500
++#define RF_CSR_CFG_DATA FIELD32(0x000000ff)
++#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00)
++#define RF_CSR_CFG_WRITE FIELD32(0x00010000)
++#define RF_CSR_CFG_BUSY FIELD32(0x00020000)
++
++/*
+ * MAC Control/Status Registers(CSR).
+ * Some values are set in TU, whereas 1 TU == 1024 us.
+ */
+@@ -1482,6 +1493,46 @@ struct hw_key_entry {
+ #define BBP3_RX_ANTENNA FIELD8(0x18)
+
+ /*
++ * BBP 4: Bandwidth
++ */
++#define BBP4_BANDWIDTH FIELD8(0x18)
++
++/*
++ * RFCSR registers
++ * The wordsize of the RFCSR is 8 bits.
++ */
++
++/*
++ * RFCSR 6:
++ */
++#define RFCSR6_R FIELD8(0x03)
++
++/*
++ * RFCSR 7:
++ */
++#define RFCSR7_RF_TUNING FIELD8(0x01)
++
++/*
++ * RFCSR 12:
++ */
++#define RFCSR12_TX_POWER FIELD8(0x1f)
++
++/*
++ * RFCSR 22:
++ */
++#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01)
++
++/*
++ * RFCSR 23:
++ */
++#define RFCSR23_FREQ_OFFSET FIELD8(0x7f)
++
++/*
++ * RFCSR 30:
++ */
++#define RFCSR30_RF_CALIBRATION FIELD8(0x80)
++
++/*
+ * RF registers
+ */
+
+--- a/drivers/net/wireless/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/rt2x00/rt2x00.h
+@@ -780,6 +780,12 @@ struct rt2x00_dev {
+ u8 freq_offset;
+
+ /*
++ * Calibration information (for rt2800usb).
++ */
++ u8 calibration_bw20;
++ u8 calibration_bw40;
++
++ /*
+ * Low level statistics which will have
+ * to be kept up to date while device is running.
+ */
diff --git a/package/mac80211/patches/329-rt2x00-Add-support-for-2-firmware-file-lengths-rt2.patch b/package/mac80211/patches/329-rt2x00-Add-support-for-2-firmware-file-lengths-rt2.patch
new file mode 100644
index 0000000..b05843d
--- /dev/null
+++ b/package/mac80211/patches/329-rt2x00-Add-support-for-2-firmware-file-lengths-rt2.patch
@@ -0,0 +1,58 @@
+From cac151e6e6aa50ecb5d965aa5e2840d0e69f8efa Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Thu, 22 Jan 2009 22:02:32 +0100
+Subject: [PATCH] rt2x00: Add support for 2 firmware file lengths (rt2800usb)
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2800usb.c | 32 +++++++++++++++++++++++++++++-
+ 1 files changed, 30 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800usb.c
++++ b/drivers/net/wireless/rt2x00/rt2800usb.c
+@@ -1128,6 +1128,34 @@ static int rt2800usb_load_firmware(struc
+ unsigned int i;
+ int status;
+ u32 reg;
++ u32 offset;
++ u32 length;
++ u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff;
++
++ /*
++ * Firmware files:
++ * There are 2 variations of the rt2870 firmware.
++ * a) size: 4kb
++ * b) size: 8kb
++ * Note that (b) contains 2 seperate firmware blobs of 4k
++ * within the file. The first blob is the same firmware as (a),
++ * but the second blob is for the additional chipsets.
++ */
++ if (len < 4096) {
++ ERROR(rt2x00dev, "Unsupported firmware file (len=%zu)\n", len);
++ return -ENOENT;
++ }
++
++ if ((chipset == 0x2860) || (chipset == 0x2872) || (chipset == 0x3070)) {
++ offset = 0;
++ length = 4096;
++ } else if (len == 8192) {
++ offset = 4096;
++ length = 4096;
++ } else {
++ ERROR(rt2x00dev, "Unsupported firmware file (len=%zu)\n", len);
++ return -ENOENT;
++ }
+
+ /*
+ * Wait for stable hardware.
+@@ -1150,8 +1178,8 @@ static int rt2800usb_load_firmware(struc
+ rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+ USB_VENDOR_REQUEST_OUT,
+ FIRMWARE_IMAGE_BASE,
+- data, len,
+- REGISTER_TIMEOUT32(len));
++ data + offset, length,
++ REGISTER_TIMEOUT32(length));
+
+ rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
+ rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
diff --git a/package/mac80211/patches/400-ath9k-restore-ath9k_platform.h.patch b/package/mac80211/patches/400-ath9k-restore-ath9k_platform.h.patch
deleted file mode 100644
index 6c7d29d..0000000
--- a/package/mac80211/patches/400-ath9k-restore-ath9k_platform.h.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- /dev/null
-+++ b/include/linux/ath9k_platform.h
-@@ -0,0 +1,28 @@
-+/*
-+ * Copyright (c) 2008 Atheros Communications Inc.
-+ * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+#ifndef _LINUX_ATH9K_PLATFORM_H
-+#define _LINUX_ATH9K_PLATFORM_H
-+
-+#define ATH9K_PLAT_EEP_MAX_WORDS 2048
-+
-+struct ath9k_platform_data {
-+ u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS];
-+};
-+
-+#endif /* _LINUX_ATH9K_PLATFORM_H */