summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorClaudio Mignanti <c.mignanti@gmail.com>2010-07-22 11:32:42 +0000
committerClaudio Mignanti <c.mignanti@gmail.com>2010-07-22 11:32:42 +0000
commitd4d6fefdf27845273be0c49b53539334817aa3c6 (patch)
tree72eb9cc4523168d9acf478a36b0d319ed609f355
parent4a829973275bc47a85e499b9f6f4872bacadb502 (diff)
downloadmtk-20170518-d4d6fefdf27845273be0c49b53539334817aa3c6.zip
mtk-20170518-d4d6fefdf27845273be0c49b53539334817aa3c6.tar.gz
mtk-20170518-d4d6fefdf27845273be0c49b53539334817aa3c6.tar.bz2
general cleanup
SVN-Revision: 22352
-rw-r--r--target/linux/at91/config-default (renamed from target/linux/at91/config-2.6.34)0
-rw-r--r--target/linux/at91/patches-2.6.25/000-at91patches.patch13019
-rw-r--r--target/linux/at91/patches-2.6.25/001-vlink-machine.patch229
-rw-r--r--target/linux/at91/patches-2.6.25/002-led-driver.patch167
-rw-r--r--target/linux/at91/patches-2.6.25/003-gpio-driver.patch546
-rw-r--r--target/linux/at91/patches-2.6.25/007-mtd-partition.patch36
-rw-r--r--target/linux/at91/patches-2.6.25/008-fdl-serial.patch161
-rw-r--r--target/linux/at91/patches-2.6.25/009-fdl-uartinit.patch34
-rw-r--r--target/linux/at91/patches-2.6.25/010-dm9161a-phyfix.patch28
-rw-r--r--target/linux/at91/patches-2.6.25/014-initpartition.patch18
-rw-r--r--target/linux/at91/patches-2.6.25/017-usb_serial_endpoint_size.patch11
11 files changed, 0 insertions, 14249 deletions
diff --git a/target/linux/at91/config-2.6.34 b/target/linux/at91/config-default
index 8abb310..8abb310 100644
--- a/target/linux/at91/config-2.6.34
+++ b/target/linux/at91/config-default
diff --git a/target/linux/at91/patches-2.6.25/000-at91patches.patch b/target/linux/at91/patches-2.6.25/000-at91patches.patch
deleted file mode 100644
index 06c2935..0000000
--- a/target/linux/at91/patches-2.6.25/000-at91patches.patch
+++ /dev/null
@@ -1,13019 +0,0 @@
---- a/arch/arm/mach-at91/Kconfig
-+++ b/arch/arm/mach-at91/Kconfig
-@@ -12,18 +12,28 @@ config ARCH_AT91RM9200
-
- config ARCH_AT91SAM9260
- bool "AT91SAM9260 or AT91SAM9XE"
-+ select GENERIC_TIME
-+ select GENERIC_CLOCKEVENTS
-
- config ARCH_AT91SAM9261
- bool "AT91SAM9261"
-+ select GENERIC_TIME
-+ select GENERIC_CLOCKEVENTS
-
- config ARCH_AT91SAM9263
- bool "AT91SAM9263"
-+ select GENERIC_TIME
-+ select GENERIC_CLOCKEVENTS
-
- config ARCH_AT91SAM9RL
- bool "AT91SAM9RL"
-+ select GENERIC_TIME
-+ select GENERIC_CLOCKEVENTS
-
- config ARCH_AT91CAP9
- bool "AT91CAP9"
-+ select GENERIC_TIME
-+ select GENERIC_CLOCKEVENTS
-
- config ARCH_AT91X40
- bool "AT91x40"
-@@ -45,7 +55,7 @@ config MACH_ONEARM
- depends on ARCH_AT91RM9200
- help
- Select this if you are using Ajeco's 1ARM Single Board Computer.
-- <http://www.ajeco.fi/products.htm>
-+ <http://www.ajeco.fi/eng/products_e.htm>
-
- config ARCH_AT91RM9200DK
- bool "Atmel AT91RM9200-DK Development board"
-@@ -94,7 +104,7 @@ config MACH_KB9200
- depends on ARCH_AT91RM9200
- help
- Select this if you are using KwikByte's KB920x board.
-- <http://kwikbyte.com/KB9202_description_new.htm>
-+ <http://www.kwikbyte.com/KB9202.html>
-
- config MACH_PICOTUX2XX
- bool "picotux 200"
-@@ -109,6 +119,38 @@ config MACH_KAFA
- help
- Select this if you are using Sperry-Sun's KAFA board.
-
-+config MACH_CHUB
-+ bool "Promwad Chub board"
-+ depends on ARCH_AT91RM9200
-+ help
-+ Select this if you are using Promwad's Chub board.
-+
-+config MACH_HOMEMATIC
-+ bool "eQ-3 HomeMatic"
-+ depends on ARCH_AT91RM9200
-+ help
-+ Select this if you are using eQ-3's HomeMatic device.
-+ <http://www.eq-3.com>
-+
-+config MACH_ECBAT91
-+ bool "emQbit ECB_AT91 SBC"
-+ depends on ARCH_AT91RM9200
-+ help
-+ Select this if you are using emQbit's ECB_AT91 board.
-+ <http://wiki.emqbit.com/free-ecb-at91>
-+
-+config MACH_SWEDATMS
-+ bool "Sweda TMS Board"
-+ depends on ARCH_AT91RM9200
-+ help
-+ Select this if you are using Sweda TMS-100 board.
-+
-+config MACH_TT9200
-+ bool "Toptech TT9200"
-+ depends on ARCH_AT91RM9200
-+ help
-+ Select this if you are using Toptech's TT9200 board.
-+
- endif
-
- # ----------------------------------------------------------
-@@ -133,6 +175,34 @@ config MACH_AT91SAM9260EK
- Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
-
-+config MACH_CAM60
-+ bool "KwikByte KB9260 (CAM60) board"
-+ depends on ARCH_AT91SAM9260
-+ help
-+ Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
-+ <http://www.kwikbyte.com/KB9260.html>
-+
-+config MACH_SAM9_L9260
-+ bool "Olimex SAM9-L9260 board"
-+ depends on ARCH_AT91SAM9260
-+ help
-+ Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
-+ <http://www.olimex.com/dev/sam9-L9260.html>
-+
-+config MACH_USB_A9260
-+ bool "CALAO USB-A9260"
-+ depends on ARCH_AT91SAM9260
-+ help
-+ Select this if you are using a Calao Systems USB-A9260.
-+ <http://www.calao-systems.com>
-+
-+config MACH_QIL_A9260
-+ bool "CALAO QIL-A9260 board"
-+ depends on ARCH_AT91SAM9260
-+ help
-+ Select this if you are using a Calao Systems QIL-A9260 Board.
-+ <http://www.calao-systems.com>
-+
- endif
-
- # ----------------------------------------------------------
-@@ -163,6 +233,13 @@ config MACH_AT91SAM9263EK
- Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
-
-+config MACH_USB_A9263
-+ bool "CALAO USB-A9263"
-+ depends on ARCH_AT91SAM9263
-+ help
-+ Select this if you are using a Calao Systems USB-A9263.
-+ <http://www.calao-systems.com>
-+
- endif
-
- # ----------------------------------------------------------
-@@ -216,7 +293,7 @@ comment "AT91 Board Options"
-
- config MTD_AT91_DATAFLASH_CARD
- bool "Enable DataFlash Card support"
-- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK)
-+ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK)
- help
- Enable support for the DataFlash card.
-
-@@ -237,6 +314,19 @@ config AT91_PROGRAMMABLE_CLOCKS
- Select this if you need to program one or more of the PCK0..PCK3
- programmable clock outputs.
-
-+config AT91_SLOW_CLOCK
-+ bool "Suspend-to-RAM disables main oscillator"
-+ depends on SUSPEND
-+ help
-+ Select this if you want Suspend-to-RAM to save the most power
-+ possible (without powering off the CPU) by disabling the PLLs
-+ and main oscillator so that only the 32 KiHz clock is available.
-+
-+ When only that slow-clock is available, some peripherals lose
-+ functionality. Many can't issue wakeup events unless faster
-+ clocks are available. Some lose their operating state and
-+ need to be completely re-initialized.
-+
- config AT91_TIMER_HZ
- int "Kernel HZ (jiffies per second)"
- range 32 1024
---- a/arch/arm/mach-at91/Makefile
-+++ b/arch/arm/mach-at91/Makefile
-@@ -28,16 +28,26 @@ obj-$(CONFIG_MACH_CARMEVA) += board-carm
- obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
- obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
- obj-$(CONFIG_MACH_KAFA) += board-kafa.o
-+obj-$(CONFIG_MACH_CHUB) += board-chub.o
- obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o
-+obj-$(CONFIG_MACH_HOMEMATIC) += board-homematic.o
-+obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o
-+obj-$(CONFIG_MACH_SWEDATMS) += board-tms.o
-+obj-$(CONFIG_MACH_TT9200) += board-tt9200.o
-
- # AT91SAM9260 board-specific support
- obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
-+obj-$(CONFIG_MACH_CAM60) += board-cam60.o
-+obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o
-+obj-$(CONFIG_MACH_USB_A9260) += board-usb-a9260.o
-+obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o
-
- # AT91SAM9261 board-specific support
- obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
-
- # AT91SAM9263 board-specific support
- obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
-+obj-$(CONFIG_MACH_USB_A9263) += board-usb-a9263.o
-
- # AT91SAM9RL board-specific support
- obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
-@@ -50,9 +60,11 @@ obj-$(CONFIG_MACH_AT91EB01) += board-eb0
-
- # Drivers
- obj-y += leds.o
-+obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
-
- # Power Management
- obj-$(CONFIG_PM) += pm.o
-+obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o
-
- ifeq ($(CONFIG_PM_DEBUG),y)
- CFLAGS_pm.o += -DDEBUG
---- a/arch/arm/mach-at91/at91cap9.c
-+++ b/arch/arm/mach-at91/at91cap9.c
-@@ -13,12 +13,15 @@
- */
-
- #include <linux/module.h>
-+#include <linux/pm.h>
-
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
-+#include <asm/arch/cpu.h>
- #include <asm/arch/at91cap9.h>
- #include <asm/arch/at91_pmc.h>
- #include <asm/arch/at91_rstc.h>
-+#include <asm/arch/at91_shdwc.h>
-
- #include "generic.h"
- #include "clock.h"
-@@ -288,6 +291,12 @@ static void at91cap9_reset(void)
- at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
- }
-
-+static void at91cap9_poweroff(void)
-+{
-+ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-+}
-+
-+
- /* --------------------------------------------------------------------
- * AT91CAP9 processor initialization
- * -------------------------------------------------------------------- */
-@@ -298,6 +307,7 @@ void __init at91cap9_initialize(unsigned
- iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc));
-
- at91_arch_reset = at91cap9_reset;
-+ pm_power_off = at91cap9_poweroff;
- at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
-
- /* Init clock subsystem */
-@@ -308,6 +318,12 @@ void __init at91cap9_initialize(unsigned
-
- /* Register GPIO subsystem */
- at91_gpio_init(at91cap9_gpio, 4);
-+
-+ /* Remember the silicon revision */
-+ if (cpu_is_at91cap9_revB())
-+ system_rev = 0xB;
-+ else if (cpu_is_at91cap9_revC())
-+ system_rev = 0xC;
- }
-
- /* --------------------------------------------------------------------
---- a/arch/arm/mach-at91/at91cap9_devices.c
-+++ b/arch/arm/mach-at91/at91cap9_devices.c
-@@ -13,18 +13,20 @@
- */
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-
- #include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
--#include <linux/mtd/physmap.h>
-+#include <linux/i2c-gpio.h>
-
- #include <video/atmel_lcdc.h>
-
- #include <asm/arch/board.h>
-+#include <asm/arch/cpu.h>
- #include <asm/arch/gpio.h>
- #include <asm/arch/at91cap9.h>
--#include <asm/arch/at91sam926x_mc.h>
- #include <asm/arch/at91cap9_matrix.h>
-+#include <asm/arch/at91sam9_smc.h>
-
- #include "generic.h"
-
-@@ -69,6 +71,9 @@ void __init at91_add_device_usbh(struct
- if (!data)
- return;
-
-+ if (cpu_is_at91cap9_revB())
-+ set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH);
-+
- /* Enable VBus control for UHP ports */
- for (i = 0; i < data->ports; i++) {
- if (data->vbus_pin[i])
-@@ -84,6 +89,110 @@ void __init at91_add_device_usbh(struct
-
-
- /* --------------------------------------------------------------------
-+ * USB HS Device (Gadget)
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
-+
-+static struct resource usba_udc_resources[] = {
-+ [0] = {
-+ .start = AT91CAP9_UDPHS_FIFO,
-+ .end = AT91CAP9_UDPHS_FIFO + SZ_512K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91CAP9_BASE_UDPHS,
-+ .end = AT91CAP9_BASE_UDPHS + SZ_1K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [2] = {
-+ .start = AT91CAP9_ID_UDPHS,
-+ .end = AT91CAP9_ID_UDPHS,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
-+ [idx] = { \
-+ .name = nam, \
-+ .index = idx, \
-+ .fifo_size = maxpkt, \
-+ .nr_banks = maxbk, \
-+ .can_dma = dma, \
-+ .can_isoc = isoc, \
-+ }
-+
-+static struct usba_ep_data usba_udc_ep[] = {
-+ EP("ep0", 0, 64, 1, 0, 0),
-+ EP("ep1", 1, 1024, 3, 1, 1),
-+ EP("ep2", 2, 1024, 3, 1, 1),
-+ EP("ep3", 3, 1024, 2, 1, 1),
-+ EP("ep4", 4, 1024, 2, 1, 1),
-+ EP("ep5", 5, 1024, 2, 1, 0),
-+ EP("ep6", 6, 1024, 2, 1, 0),
-+ EP("ep7", 7, 1024, 2, 0, 0),
-+};
-+
-+#undef EP
-+
-+/*
-+ * pdata doesn't have room for any endpoints, so we need to
-+ * append room for the ones we need right after it.
-+ */
-+static struct {
-+ struct usba_platform_data pdata;
-+ struct usba_ep_data ep[8];
-+} usba_udc_data;
-+
-+static struct platform_device at91_usba_udc_device = {
-+ .name = "atmel_usba_udc",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &usba_udc_data.pdata,
-+ },
-+ .resource = usba_udc_resources,
-+ .num_resources = ARRAY_SIZE(usba_udc_resources),
-+};
-+
-+void __init at91_add_device_usba(struct usba_platform_data *data)
-+{
-+ if (cpu_is_at91cap9_revB()) {
-+ set_irq_type(AT91CAP9_ID_UDPHS, IRQT_HIGH);
-+ at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS |
-+ AT91_MATRIX_UDPHS_BYPASS_LOCK);
-+ }
-+ else
-+ at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS);
-+
-+ /*
-+ * Invalid pins are 0 on AT91, but the usba driver is shared
-+ * with AVR32, which use negative values instead. Once/if
-+ * gpio_is_valid() is ported to AT91, revisit this code.
-+ */
-+ usba_udc_data.pdata.vbus_pin = -EINVAL;
-+ usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
-+ memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
-+
-+ if (data && data->vbus_pin > 0) {
-+ at91_set_gpio_input(data->vbus_pin, 0);
-+ at91_set_deglitch(data->vbus_pin, 1);
-+ usba_udc_data.pdata.vbus_pin = data->vbus_pin;
-+ }
-+
-+ /* Pullup pin is handled internally by USB device peripheral */
-+
-+ /* Clocks */
-+ at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
-+ at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
-+
-+ platform_device_register(&at91_usba_udc_device);
-+}
-+#else
-+void __init at91_add_device_usba(struct usba_platform_data *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
- * Ethernet
- * -------------------------------------------------------------------- */
-
-@@ -246,7 +355,7 @@ void __init at91_add_device_mmc(short mm
- }
-
- mmc0_data = *data;
-- at91_clock_associate("mci0_clk", &at91cap9_mmc1_device.dev, "mci_clk");
-+ at91_clock_associate("mci0_clk", &at91cap9_mmc0_device.dev, "mci_clk");
- platform_device_register(&at91cap9_mmc0_device);
- } else { /* MCI1 */
- /* CLK */
-@@ -283,10 +392,15 @@ static struct at91_nand_data nand_data;
- #define NAND_BASE AT91_CHIPSELECT_3
-
- static struct resource nand_resources[] = {
-- {
-+ [0] = {
- .start = NAND_BASE,
- .end = NAND_BASE + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91_BASE_SYS + AT91_ECC,
-+ .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
-+ .flags = IORESOURCE_MEM,
- }
- };
-
-@@ -344,6 +458,7 @@ void __init at91_add_device_nand(struct
- void __init at91_add_device_nand(struct at91_nand_data *data) {}
- #endif
-
-+
- /* --------------------------------------------------------------------
- * TWI (i2c)
- * -------------------------------------------------------------------- */
-@@ -532,17 +647,64 @@ void __init at91_add_device_spi(struct s
-
-
- /* --------------------------------------------------------------------
-+ * Timer/Counter block
-+ * -------------------------------------------------------------------- */
-+
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+static struct resource tcb_resources[] = {
-+ [0] = {
-+ .start = AT91CAP9_BASE_TCB0,
-+ .end = AT91CAP9_BASE_TCB0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91CAP9_ID_TCB,
-+ .end = AT91CAP9_ID_TCB,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91cap9_tcb_device = {
-+ .name = "atmel_tcb",
-+ .id = 0,
-+ .resource = tcb_resources,
-+ .num_resources = ARRAY_SIZE(tcb_resources),
-+};
-+
-+static void __init at91_add_device_tc(void)
-+{
-+ /* this chip has one clock and irq for all three TC channels */
-+ at91_clock_associate("tcb_clk", &at91cap9_tcb_device.dev, "t0_clk");
-+ platform_device_register(&at91cap9_tcb_device);
-+}
-+#else
-+static void __init at91_add_device_tc(void) { }
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
- * RTT
- * -------------------------------------------------------------------- */
-
-+static struct resource rtt_resources[] = {
-+ {
-+ .start = AT91_BASE_SYS + AT91_RTT,
-+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
- static struct platform_device at91cap9_rtt_device = {
- .name = "at91_rtt",
-- .id = -1,
-- .num_resources = 0,
-+ .id = 0,
-+ .resource = rtt_resources,
-+ .num_resources = ARRAY_SIZE(rtt_resources),
- };
-
- static void __init at91_add_device_rtt(void)
- {
-+ device_init_wakeup(&at91cap9_rtt_device.dev, 1);
- platform_device_register(&at91cap9_rtt_device);
- }
-
-@@ -660,6 +822,9 @@ void __init at91_add_device_lcdc(struct
- if (!data)
- return;
-
-+ if (cpu_is_at91cap9_revB())
-+ set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH);
-+
- at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
- at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
-@@ -990,7 +1155,7 @@ static inline void configure_usart2_pins
- at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
- }
-
--static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
- struct platform_device *atmel_default_console_device; /* the serial console device */
-
- void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-@@ -1031,8 +1196,6 @@ void __init at91_set_serial_console(unsi
- {
- if (portnr < ATMEL_MAX_UART)
- atmel_default_console_device = at91_uarts[portnr];
-- if (!atmel_default_console_device)
-- printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
-
- void __init at91_add_device_serial(void)
-@@ -1043,6 +1206,9 @@ void __init at91_add_device_serial(void)
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-+
-+ if (!atmel_default_console_device)
-+ printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
- #else
- void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-@@ -1060,6 +1226,7 @@ static int __init at91_add_standard_devi
- {
- at91_add_device_rtt();
- at91_add_device_watchdog();
-+ at91_add_device_tc();
- return 0;
- }
-
---- a/arch/arm/mach-at91/at91rm9200_devices.c
-+++ b/arch/arm/mach-at91/at91rm9200_devices.c
-@@ -513,7 +513,18 @@ void __init at91_add_device_i2c(struct i
- * SPI
- * -------------------------------------------------------------------- */
-
--#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-+#if defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE) /* legacy SPI driver */
-+#define SPI_DEVNAME "at91_spi"
-+
-+#elif defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) /* SPI bitbanging driver */
-+#define SPI_DEVNAME "at91_spi"
-+
-+#elif defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) /* new SPI driver */
-+#define SPI_DEVNAME "atmel_spi"
-+
-+#endif
-+
-+#ifdef SPI_DEVNAME
- static u64 spi_dmamask = DMA_BIT_MASK(32);
-
- static struct resource spi_resources[] = {
-@@ -530,7 +541,7 @@ static struct resource spi_resources[] =
- };
-
- static struct platform_device at91rm9200_spi_device = {
-- .name = "atmel_spi",
-+ .name = SPI_DEVNAME,
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
-@@ -563,6 +574,12 @@ void __init at91_add_device_spi(struct s
- else
- at91_set_gpio_output(cs_pin, 1);
-
-+#if defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)
-+ /*
-+ * Force peripheral mode when using the legacy SPI driver.
-+ */
-+ at91_set_A_periph(cs_pin, 0);
-+#endif
-
- /* pass chip-select pin to driver */
- devices[i].controller_data = (void *) cs_pin;
-@@ -577,6 +594,90 @@ void __init at91_add_device_spi(struct s
-
-
- /* --------------------------------------------------------------------
-+ * Timer/Counter blocks
-+ * -------------------------------------------------------------------- */
-+
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+static struct resource tcb0_resources[] = {
-+ [0] = {
-+ .start = AT91RM9200_BASE_TCB0,
-+ .end = AT91RM9200_BASE_TCB0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91RM9200_ID_TC0,
-+ .end = AT91RM9200_ID_TC0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [2] = {
-+ .start = AT91RM9200_ID_TC1,
-+ .end = AT91RM9200_ID_TC1,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [3] = {
-+ .start = AT91RM9200_ID_TC2,
-+ .end = AT91RM9200_ID_TC2,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91rm9200_tcb0_device = {
-+ .name = "atmel_tcb",
-+ .id = 0,
-+ .resource = tcb0_resources,
-+ .num_resources = ARRAY_SIZE(tcb0_resources),
-+};
-+
-+static struct resource tcb1_resources[] = {
-+ [0] = {
-+ .start = AT91RM9200_BASE_TCB1,
-+ .end = AT91RM9200_BASE_TCB1 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91RM9200_ID_TC3,
-+ .end = AT91RM9200_ID_TC3,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [2] = {
-+ .start = AT91RM9200_ID_TC4,
-+ .end = AT91RM9200_ID_TC4,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [3] = {
-+ .start = AT91RM9200_ID_TC5,
-+ .end = AT91RM9200_ID_TC5,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91rm9200_tcb1_device = {
-+ .name = "atmel_tcb",
-+ .id = 1,
-+ .resource = tcb1_resources,
-+ .num_resources = ARRAY_SIZE(tcb1_resources),
-+};
-+
-+static void __init at91_add_device_tc(void)
-+{
-+ /* this chip has a separate clock and irq for each TC channel */
-+ at91_clock_associate("tc0_clk", &at91rm9200_tcb0_device.dev, "t0_clk");
-+ at91_clock_associate("tc1_clk", &at91rm9200_tcb0_device.dev, "t1_clk");
-+ at91_clock_associate("tc2_clk", &at91rm9200_tcb0_device.dev, "t2_clk");
-+ platform_device_register(&at91rm9200_tcb0_device);
-+
-+ at91_clock_associate("tc3_clk", &at91rm9200_tcb1_device.dev, "t0_clk");
-+ at91_clock_associate("tc4_clk", &at91rm9200_tcb1_device.dev, "t1_clk");
-+ at91_clock_associate("tc5_clk", &at91rm9200_tcb1_device.dev, "t2_clk");
-+ platform_device_register(&at91rm9200_tcb1_device);
-+}
-+#else
-+static void __init at91_add_device_tc(void) { }
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
- * RTC
- * -------------------------------------------------------------------- */
-
-@@ -589,6 +690,7 @@ static struct platform_device at91rm9200
-
- static void __init at91_add_device_rtc(void)
- {
-+ device_init_wakeup(&at91rm9200_rtc_device.dev, 1);
- platform_device_register(&at91rm9200_rtc_device);
- }
- #else
-@@ -1019,7 +1121,7 @@ static inline void configure_usart3_pins
- at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */
- }
-
--static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
- struct platform_device *atmel_default_console_device; /* the serial console device */
-
- void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-@@ -1110,8 +1212,6 @@ void __init at91_set_serial_console(unsi
- {
- if (portnr < ATMEL_MAX_UART)
- atmel_default_console_device = at91_uarts[portnr];
-- if (!atmel_default_console_device)
-- printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
-
- void __init at91_add_device_serial(void)
-@@ -1122,6 +1222,9 @@ void __init at91_add_device_serial(void)
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-+
-+ if (!atmel_default_console_device)
-+ printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
- #else
- void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
-@@ -1141,6 +1244,7 @@ static int __init at91_add_standard_devi
- {
- at91_add_device_rtc();
- at91_add_device_watchdog();
-+ at91_add_device_tc();
- return 0;
- }
-
---- a/arch/arm/mach-at91/at91rm9200_time.c
-+++ b/arch/arm/mach-at91/at91rm9200_time.c
-@@ -136,8 +136,6 @@ clkevt32k_next_event(unsigned long delta
- u32 alm;
- int status = 0;
-
-- BUG_ON(delta < 2);
--
- /* Use "raw" primitives so we behave correctly on RT kernels. */
- raw_local_irq_save(flags);
-
---- a/arch/arm/mach-at91/at91sam9260.c
-+++ b/arch/arm/mach-at91/at91sam9260.c
-@@ -11,6 +11,7 @@
- */
-
- #include <linux/module.h>
-+#include <linux/pm.h>
-
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
-@@ -18,6 +19,7 @@
- #include <asm/arch/at91sam9260.h>
- #include <asm/arch/at91_pmc.h>
- #include <asm/arch/at91_rstc.h>
-+#include <asm/arch/at91_shdwc.h>
-
- #include "generic.h"
- #include "clock.h"
-@@ -267,6 +269,11 @@ static void at91sam9260_reset(void)
- at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
- }
-
-+static void at91sam9260_poweroff(void)
-+{
-+ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-+}
-+
-
- /* --------------------------------------------------------------------
- * AT91SAM9260 processor initialization
-@@ -304,6 +311,7 @@ void __init at91sam9260_initialize(unsig
- iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
-
- at91_arch_reset = at91sam9260_reset;
-+ pm_power_off = at91sam9260_poweroff;
- at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
- | (1 << AT91SAM9260_ID_IRQ2);
-
---- a/arch/arm/mach-at91/at91sam9260_devices.c
-+++ b/arch/arm/mach-at91/at91sam9260_devices.c
-@@ -19,8 +19,8 @@
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
- #include <asm/arch/at91sam9260.h>
--#include <asm/arch/at91sam926x_mc.h>
- #include <asm/arch/at91sam9260_matrix.h>
-+#include <asm/arch/at91sam9_smc.h>
-
- #include "generic.h"
-
-@@ -288,10 +288,15 @@ static struct at91_nand_data nand_data;
- #define NAND_BASE AT91_CHIPSELECT_3
-
- static struct resource nand_resources[] = {
-- {
-+ [0] = {
- .start = NAND_BASE,
- .end = NAND_BASE + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91_BASE_SYS + AT91_ECC,
-+ .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
-+ .flags = IORESOURCE_MEM,
- }
- };
-
-@@ -540,6 +545,90 @@ void __init at91_add_device_spi(struct s
-
-
- /* --------------------------------------------------------------------
-+ * Timer/Counter blocks
-+ * -------------------------------------------------------------------- */
-+
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+static struct resource tcb0_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9260_BASE_TCB0,
-+ .end = AT91SAM9260_BASE_TCB0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9260_ID_TC0,
-+ .end = AT91SAM9260_ID_TC0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [2] = {
-+ .start = AT91SAM9260_ID_TC1,
-+ .end = AT91SAM9260_ID_TC1,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [3] = {
-+ .start = AT91SAM9260_ID_TC2,
-+ .end = AT91SAM9260_ID_TC2,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9260_tcb0_device = {
-+ .name = "atmel_tcb",
-+ .id = 0,
-+ .resource = tcb0_resources,
-+ .num_resources = ARRAY_SIZE(tcb0_resources),
-+};
-+
-+static struct resource tcb1_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9260_BASE_TCB1,
-+ .end = AT91SAM9260_BASE_TCB1 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9260_ID_TC3,
-+ .end = AT91SAM9260_ID_TC3,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [2] = {
-+ .start = AT91SAM9260_ID_TC4,
-+ .end = AT91SAM9260_ID_TC4,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [3] = {
-+ .start = AT91SAM9260_ID_TC5,
-+ .end = AT91SAM9260_ID_TC5,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9260_tcb1_device = {
-+ .name = "atmel_tcb",
-+ .id = 1,
-+ .resource = tcb1_resources,
-+ .num_resources = ARRAY_SIZE(tcb1_resources),
-+};
-+
-+static void __init at91_add_device_tc(void)
-+{
-+ /* this chip has a separate clock and irq for each TC channel */
-+ at91_clock_associate("tc0_clk", &at91sam9260_tcb0_device.dev, "t0_clk");
-+ at91_clock_associate("tc1_clk", &at91sam9260_tcb0_device.dev, "t1_clk");
-+ at91_clock_associate("tc2_clk", &at91sam9260_tcb0_device.dev, "t2_clk");
-+ platform_device_register(&at91sam9260_tcb0_device);
-+
-+ at91_clock_associate("tc3_clk", &at91sam9260_tcb1_device.dev, "t0_clk");
-+ at91_clock_associate("tc4_clk", &at91sam9260_tcb1_device.dev, "t1_clk");
-+ at91_clock_associate("tc5_clk", &at91sam9260_tcb1_device.dev, "t2_clk");
-+ platform_device_register(&at91sam9260_tcb1_device);
-+}
-+#else
-+static void __init at91_add_device_tc(void) { }
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
- * RTT
- * -------------------------------------------------------------------- */
-
-@@ -553,13 +642,14 @@ static struct resource rtt_resources[] =
-
- static struct platform_device at91sam9260_rtt_device = {
- .name = "at91_rtt",
-- .id = -1,
-+ .id = 0,
- .resource = rtt_resources,
- .num_resources = ARRAY_SIZE(rtt_resources),
- };
-
- static void __init at91_add_device_rtt(void)
- {
-+ device_init_wakeup(&at91sam9260_rtt_device.dev, 1);
- platform_device_register(&at91sam9260_rtt_device);
- }
-
-@@ -962,7 +1052,7 @@ static inline void configure_usart5_pins
- at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */
- }
-
--static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
- struct platform_device *atmel_default_console_device; /* the serial console device */
-
- void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-@@ -1073,8 +1163,6 @@ void __init at91_set_serial_console(unsi
- {
- if (portnr < ATMEL_MAX_UART)
- atmel_default_console_device = at91_uarts[portnr];
-- if (!atmel_default_console_device)
-- printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
-
- void __init at91_add_device_serial(void)
-@@ -1085,6 +1173,9 @@ void __init at91_add_device_serial(void)
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-+
-+ if (!atmel_default_console_device)
-+ printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
- #else
- void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
-@@ -1103,6 +1194,7 @@ static int __init at91_add_standard_devi
- {
- at91_add_device_rtt();
- at91_add_device_watchdog();
-+ at91_add_device_tc();
- return 0;
- }
-
---- a/arch/arm/mach-at91/at91sam9261.c
-+++ b/arch/arm/mach-at91/at91sam9261.c
-@@ -11,12 +11,14 @@
- */
-
- #include <linux/module.h>
-+#include <linux/pm.h>
-
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
- #include <asm/arch/at91sam9261.h>
- #include <asm/arch/at91_pmc.h>
- #include <asm/arch/at91_rstc.h>
-+#include <asm/arch/at91_shdwc.h>
-
- #include "generic.h"
- #include "clock.h"
-@@ -245,6 +247,11 @@ static void at91sam9261_reset(void)
- at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
- }
-
-+static void at91sam9261_poweroff(void)
-+{
-+ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-+}
-+
-
- /* --------------------------------------------------------------------
- * AT91SAM9261 processor initialization
-@@ -256,6 +263,7 @@ void __init at91sam9261_initialize(unsig
- iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
-
- at91_arch_reset = at91sam9261_reset;
-+ pm_power_off = at91sam9261_poweroff;
- at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
- | (1 << AT91SAM9261_ID_IRQ2);
-
---- a/arch/arm/mach-at91/at91sam9261_devices.c
-+++ b/arch/arm/mach-at91/at91sam9261_devices.c
-@@ -24,7 +24,7 @@
- #include <asm/arch/gpio.h>
- #include <asm/arch/at91sam9261.h>
- #include <asm/arch/at91sam9261_matrix.h>
--#include <asm/arch/at91sam926x_mc.h>
-+#include <asm/arch/at91sam9_smc.h>
-
- #include "generic.h"
-
-@@ -548,6 +548,55 @@ void __init at91_add_device_lcdc(struct
-
-
- /* --------------------------------------------------------------------
-+ * Timer/Counter block
-+ * -------------------------------------------------------------------- */
-+
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+static struct resource tcb_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9261_BASE_TCB0,
-+ .end = AT91SAM9261_BASE_TCB0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9261_ID_TC0,
-+ .end = AT91SAM9261_ID_TC0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [2] = {
-+ .start = AT91SAM9261_ID_TC1,
-+ .end = AT91SAM9261_ID_TC1,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [3] = {
-+ .start = AT91SAM9261_ID_TC2,
-+ .end = AT91SAM9261_ID_TC2,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9261_tcb_device = {
-+ .name = "atmel_tcb",
-+ .id = 0,
-+ .resource = tcb_resources,
-+ .num_resources = ARRAY_SIZE(tcb_resources),
-+};
-+
-+static void __init at91_add_device_tc(void)
-+{
-+ /* this chip has a separate clock and irq for each TC channel */
-+ at91_clock_associate("tc0_clk", &at91sam9261_tcb_device.dev, "t0_clk");
-+ at91_clock_associate("tc1_clk", &at91sam9261_tcb_device.dev, "t1_clk");
-+ at91_clock_associate("tc2_clk", &at91sam9261_tcb_device.dev, "t2_clk");
-+ platform_device_register(&at91sam9261_tcb_device);
-+}
-+#else
-+static void __init at91_add_device_tc(void) { }
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
- * RTT
- * -------------------------------------------------------------------- */
-
-@@ -561,13 +610,14 @@ static struct resource rtt_resources[] =
-
- static struct platform_device at91sam9261_rtt_device = {
- .name = "at91_rtt",
-- .id = -1,
-+ .id = 0,
- .resource = rtt_resources,
- .num_resources = ARRAY_SIZE(rtt_resources),
- };
-
- static void __init at91_add_device_rtt(void)
- {
-+ device_init_wakeup(&at91sam9261_rtt_device.dev, 1);
- platform_device_register(&at91sam9261_rtt_device);
- }
-
-@@ -938,7 +988,7 @@ static inline void configure_usart2_pins
- at91_set_B_periph(AT91_PIN_PA16, 0); /* CTS2 */
- }
-
--static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
- struct platform_device *atmel_default_console_device; /* the serial console device */
-
- void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-@@ -1019,8 +1069,6 @@ void __init at91_set_serial_console(unsi
- {
- if (portnr < ATMEL_MAX_UART)
- atmel_default_console_device = at91_uarts[portnr];
-- if (!atmel_default_console_device)
-- printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
-
- void __init at91_add_device_serial(void)
-@@ -1031,6 +1079,9 @@ void __init at91_add_device_serial(void)
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-+
-+ if (!atmel_default_console_device)
-+ printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
- #else
- void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
-@@ -1050,6 +1101,7 @@ static int __init at91_add_standard_devi
- {
- at91_add_device_rtt();
- at91_add_device_watchdog();
-+ at91_add_device_tc();
- return 0;
- }
-
---- a/arch/arm/mach-at91/at91sam9263.c
-+++ b/arch/arm/mach-at91/at91sam9263.c
-@@ -11,12 +11,14 @@
- */
-
- #include <linux/module.h>
-+#include <linux/pm.h>
-
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
- #include <asm/arch/at91sam9263.h>
- #include <asm/arch/at91_pmc.h>
- #include <asm/arch/at91_rstc.h>
-+#include <asm/arch/at91_shdwc.h>
-
- #include "generic.h"
- #include "clock.h"
-@@ -271,6 +273,11 @@ static void at91sam9263_reset(void)
- at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
- }
-
-+static void at91sam9263_poweroff(void)
-+{
-+ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-+}
-+
-
- /* --------------------------------------------------------------------
- * AT91SAM9263 processor initialization
-@@ -282,6 +289,7 @@ void __init at91sam9263_initialize(unsig
- iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
-
- at91_arch_reset = at91sam9263_reset;
-+ pm_power_off = at91sam9263_poweroff;
- at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
-
- /* Init clock subsystem */
---- a/arch/arm/mach-at91/at91sam9263_devices.c
-+++ b/arch/arm/mach-at91/at91sam9263_devices.c
-@@ -22,8 +22,8 @@
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
- #include <asm/arch/at91sam9263.h>
--#include <asm/arch/at91sam926x_mc.h>
- #include <asm/arch/at91sam9263_matrix.h>
-+#include <asm/arch/at91sam9_smc.h>
-
- #include "generic.h"
-
-@@ -308,7 +308,7 @@ void __init at91_add_device_mmc(short mm
- }
-
- mmc0_data = *data;
-- at91_clock_associate("mci0_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
-+ at91_clock_associate("mci0_clk", &at91sam9263_mmc0_device.dev, "mci_clk");
- platform_device_register(&at91sam9263_mmc0_device);
- } else { /* MCI1 */
- /* CLK */
-@@ -358,10 +358,15 @@ static struct at91_nand_data nand_data;
- #define NAND_BASE AT91_CHIPSELECT_3
-
- static struct resource nand_resources[] = {
-- {
-+ [0] = {
- .start = NAND_BASE,
- .end = NAND_BASE + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91_BASE_SYS + AT91_ECC0,
-+ .end = AT91_BASE_SYS + AT91_ECC0 + SZ_512 - 1,
-+ .flags = IORESOURCE_MEM,
- }
- };
-
-@@ -783,6 +788,43 @@ void __init at91_add_device_isi(void) {}
-
-
- /* --------------------------------------------------------------------
-+ * Timer/Counter block
-+ * -------------------------------------------------------------------- */
-+
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+static struct resource tcb_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9263_BASE_TCB0,
-+ .end = AT91SAM9263_BASE_TCB0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9263_ID_TCB,
-+ .end = AT91SAM9263_ID_TCB,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9263_tcb_device = {
-+ .name = "atmel_tcb",
-+ .id = 0,
-+ .resource = tcb_resources,
-+ .num_resources = ARRAY_SIZE(tcb_resources),
-+};
-+
-+static void __init at91_add_device_tc(void)
-+{
-+ /* this chip has one clock and irq for all three TC channels */
-+ at91_clock_associate("tcb_clk", &at91sam9263_tcb_device.dev, "t0_clk");
-+ platform_device_register(&at91sam9263_tcb_device);
-+}
-+#else
-+static void __init at91_add_device_tc(void) { }
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
- * RTT
- * -------------------------------------------------------------------- */
-
-@@ -818,7 +860,9 @@ static struct platform_device at91sam926
-
- static void __init at91_add_device_rtt(void)
- {
-+ device_init_wakeup(&at91sam9263_rtt0_device.dev, 1);
- platform_device_register(&at91sam9263_rtt0_device);
-+ device_init_wakeup(&at91sam9263_rtt1_device.dev, 1);
- platform_device_register(&at91sam9263_rtt1_device);
- }
-
-@@ -933,9 +977,6 @@ static inline void configure_ssc1_pins(u
- }
-
- /*
-- * Return the device node so that board init code can use it as the
-- * parent for the device node reflecting how it's used on this board.
-- *
- * SSC controllers are accessed through library code, instead of any
- * kind of all-singing/all-dancing driver. For example one could be
- * used by a particular I2S audio codec's driver, while another one
-@@ -1146,7 +1187,7 @@ static inline void configure_usart2_pins
- at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
- }
-
--static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
- struct platform_device *atmel_default_console_device; /* the serial console device */
-
- void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-@@ -1227,8 +1268,6 @@ void __init at91_set_serial_console(unsi
- {
- if (portnr < ATMEL_MAX_UART)
- atmel_default_console_device = at91_uarts[portnr];
-- if (!atmel_default_console_device)
-- printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
-
- void __init at91_add_device_serial(void)
-@@ -1239,9 +1278,12 @@ void __init at91_add_device_serial(void)
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-+
-+ if (!atmel_default_console_device)
-+ printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
- #else
--void __init at91_init_serial(struct at91_uart_config *config) {}
-+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
- void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
- void __init at91_set_serial_console(unsigned portnr) {}
- void __init at91_add_device_serial(void) {}
-@@ -1257,6 +1299,7 @@ static int __init at91_add_standard_devi
- {
- at91_add_device_rtt();
- at91_add_device_watchdog();
-+ at91_add_device_tc();
- return 0;
- }
-
---- a/arch/arm/mach-at91/at91sam926x_time.c
-+++ b/arch/arm/mach-at91/at91sam926x_time.c
-@@ -1,23 +1,20 @@
- /*
-- * linux/arch/arm/mach-at91/at91sam926x_time.c
-+ * at91sam926x_time.c - Periodic Interval Timer (PIT) for at91sam926x
- *
- * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
- * Revision 2005 M. Nicolas Diremdjian, ATMEL Rousset, France
-+ * Converted to ClockSource/ClockEvents by David Brownell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
--
--#include <linux/init.h>
- #include <linux/interrupt.h>
- #include <linux/irq.h>
- #include <linux/kernel.h>
--#include <linux/sched.h>
--#include <linux/time.h>
-+#include <linux/clk.h>
-+#include <linux/clockchips.h>
-
--#include <asm/hardware.h>
--#include <asm/io.h>
- #include <asm/mach/time.h>
-
- #include <asm/arch/at91_pit.h>
-@@ -26,85 +23,167 @@
- #define PIT_CPIV(x) ((x) & AT91_PIT_CPIV)
- #define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20)
-
-+static u32 pit_cycle; /* write-once */
-+static u32 pit_cnt; /* access only w/system irq blocked */
-+
-+
- /*
-- * Returns number of microseconds since last timer interrupt. Note that interrupts
-- * will have been disabled by do_gettimeofday()
-- * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
-+ * Clocksource: just a monotonic counter of MCK/16 cycles.
-+ * We don't care whether or not PIT irqs are enabled.
- */
--static unsigned long at91sam926x_gettimeoffset(void)
-+static cycle_t read_pit_clk(void)
- {
-- unsigned long elapsed;
-- unsigned long t = at91_sys_read(AT91_PIT_PIIR);
-+ unsigned long flags;
-+ u32 elapsed;
-+ u32 t;
-+
-+ raw_local_irq_save(flags);
-+ elapsed = pit_cnt;
-+ t = at91_sys_read(AT91_PIT_PIIR);
-+ raw_local_irq_restore(flags);
-+
-+ elapsed += PIT_PICNT(t) * pit_cycle;
-+ elapsed += PIT_CPIV(t);
-+ return elapsed;
-+}
-+
-+static struct clocksource pit_clk = {
-+ .name = "pit",
-+ .rating = 175,
-+ .read = read_pit_clk,
-+ .shift = 20,
-+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-+};
-+
-
-- elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t); /* hardware clock cycles */
-+/*
-+ * Clockevent device: interrupts every 1/HZ (== pit_cycles * MCK/16)
-+ */
-+static void
-+pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
-+{
-+ unsigned long flags;
-
-- return (unsigned long)(elapsed * jiffies_to_usecs(1)) / LATCH;
-+ switch (mode) {
-+ case CLOCK_EVT_MODE_PERIODIC:
-+ /* update clocksource counter, then enable the IRQ */
-+ raw_local_irq_save(flags);
-+ pit_cnt += pit_cycle * PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
-+ at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN
-+ | AT91_PIT_PITIEN);
-+ raw_local_irq_restore(flags);
-+ break;
-+ case CLOCK_EVT_MODE_ONESHOT:
-+ BUG();
-+ /* FALLTHROUGH */
-+ case CLOCK_EVT_MODE_SHUTDOWN:
-+ case CLOCK_EVT_MODE_UNUSED:
-+ /* disable irq, leaving the clocksource active */
-+ at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
-+ break;
-+ case CLOCK_EVT_MODE_RESUME:
-+ break;
-+ }
- }
-
-+static struct clock_event_device pit_clkevt = {
-+ .name = "pit",
-+ .features = CLOCK_EVT_FEAT_PERIODIC,
-+ .shift = 32,
-+ .rating = 100,
-+ .cpumask = CPU_MASK_CPU0,
-+ .set_mode = pit_clkevt_mode,
-+};
-+
-+
- /*
- * IRQ handler for the timer.
- */
--static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id)
-+static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
- {
-- volatile long nr_ticks;
-
-- if (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS) { /* This is a shared interrupt */
-- /* Get number to ticks performed before interrupt and clear PIT interrupt */
-+ /* The PIT interrupt may be disabled, and is shared */
-+ if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC)
-+ && (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS)) {
-+ unsigned nr_ticks;
-+
-+ /* Get number of ticks performed before irq, and ack it */
- nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
- do {
-- timer_tick();
-+ pit_cnt += pit_cycle;
-+ pit_clkevt.event_handler(&pit_clkevt);
- nr_ticks--;
- } while (nr_ticks);
-
- return IRQ_HANDLED;
-- } else
-- return IRQ_NONE; /* not handled */
-+ }
-+
-+ return IRQ_NONE;
- }
-
--static struct irqaction at91sam926x_timer_irq = {
-+static struct irqaction at91sam926x_pit_irq = {
- .name = "at91_tick",
- .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-- .handler = at91sam926x_timer_interrupt
-+ .handler = at91sam926x_pit_interrupt
- };
-
--void at91sam926x_timer_reset(void)
-+static void at91sam926x_pit_reset(void)
- {
-- /* Disable timer */
-+ /* Disable timer and irqs */
- at91_sys_write(AT91_PIT_MR, 0);
-
-- /* Clear any pending interrupts */
-- (void) at91_sys_read(AT91_PIT_PIVR);
-+ /* Clear any pending interrupts, wait for PIT to stop counting */
-+ while (PIT_CPIV(at91_sys_read(AT91_PIT_PIVR)) != 0)
-+ cpu_relax();
-
-- /* Set Period Interval timer and enable its interrupt */
-- at91_sys_write(AT91_PIT_MR, (LATCH & AT91_PIT_PIV) | AT91_PIT_PITIEN | AT91_PIT_PITEN);
-+ /* Start PIT but don't enable IRQ */
-+ at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
- }
-
- /*
-- * Set up timer interrupt.
-+ * Set up both clocksource and clockevent support.
- */
--void __init at91sam926x_timer_init(void)
-+static void __init at91sam926x_pit_init(void)
- {
-+ unsigned long pit_rate;
-+ unsigned bits;
-+
-+ /*
-+ * Use our actual MCK to figure out how many MCK/16 ticks per
-+ * 1/HZ period (instead of a compile-time constant LATCH).
-+ */
-+ pit_rate = clk_get_rate(clk_get(NULL, "mck")) / 16;
-+ pit_cycle = (pit_rate + HZ/2) / HZ;
-+ WARN_ON(((pit_cycle - 1) & ~AT91_PIT_PIV) != 0);
-+
- /* Initialize and enable the timer */
-- at91sam926x_timer_reset();
-+ at91sam926x_pit_reset();
-
-- /* Make IRQs happen for the system timer. */
-- setup_irq(AT91_ID_SYS, &at91sam926x_timer_irq);
-+ /*
-+ * Register clocksource. The high order bits of PIV are unused,
-+ * so this isn't a 32-bit counter unless we get clockevent irqs.
-+ */
-+ pit_clk.mult = clocksource_hz2mult(pit_rate, pit_clk.shift);
-+ bits = 12 /* PICNT */ + ilog2(pit_cycle) /* PIV */;
-+ pit_clk.mask = CLOCKSOURCE_MASK(bits);
-+ clocksource_register(&pit_clk);
-+
-+ /* Set up irq handler */
-+ setup_irq(AT91_ID_SYS, &at91sam926x_pit_irq);
-+
-+ /* Set up and register clockevents */
-+ pit_clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, pit_clkevt.shift);
-+ clockevents_register_device(&pit_clkevt);
- }
-
--#ifdef CONFIG_PM
--static void at91sam926x_timer_suspend(void)
-+static void at91sam926x_pit_suspend(void)
- {
- /* Disable timer */
- at91_sys_write(AT91_PIT_MR, 0);
- }
--#else
--#define at91sam926x_timer_suspend NULL
--#endif
-
- struct sys_timer at91sam926x_timer = {
-- .init = at91sam926x_timer_init,
-- .offset = at91sam926x_gettimeoffset,
-- .suspend = at91sam926x_timer_suspend,
-- .resume = at91sam926x_timer_reset,
-+ .init = at91sam926x_pit_init,
-+ .suspend = at91sam926x_pit_suspend,
-+ .resume = at91sam926x_pit_reset,
- };
--
---- a/arch/arm/mach-at91/at91sam9rl.c
-+++ b/arch/arm/mach-at91/at91sam9rl.c
-@@ -10,6 +10,7 @@
- */
-
- #include <linux/module.h>
-+#include <linux/pm.h>
-
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
-@@ -17,6 +18,7 @@
- #include <asm/arch/at91sam9rl.h>
- #include <asm/arch/at91_pmc.h>
- #include <asm/arch/at91_rstc.h>
-+#include <asm/arch/at91_shdwc.h>
-
- #include "generic.h"
- #include "clock.h"
-@@ -244,6 +246,11 @@ static void at91sam9rl_reset(void)
- at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
- }
-
-+static void at91sam9rl_poweroff(void)
-+{
-+ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-+}
-+
-
- /* --------------------------------------------------------------------
- * AT91SAM9RL processor initialization
-@@ -274,6 +281,7 @@ void __init at91sam9rl_initialize(unsign
- iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc));
-
- at91_arch_reset = at91sam9rl_reset;
-+ pm_power_off = at91sam9rl_poweroff;
- at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
-
- /* Init clock subsystem */
---- a/arch/arm/mach-at91/at91sam9rl_devices.c
-+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
-@@ -20,12 +20,107 @@
- #include <asm/arch/gpio.h>
- #include <asm/arch/at91sam9rl.h>
- #include <asm/arch/at91sam9rl_matrix.h>
--#include <asm/arch/at91sam926x_mc.h>
-+#include <asm/arch/at91sam9_smc.h>
-
- #include "generic.h"
-
-
- /* --------------------------------------------------------------------
-+ * USB HS Device (Gadget)
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
-+
-+static struct resource usba_udc_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9RL_UDPHS_FIFO,
-+ .end = AT91SAM9RL_UDPHS_FIFO + SZ_512K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9RL_BASE_UDPHS,
-+ .end = AT91SAM9RL_BASE_UDPHS + SZ_1K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [2] = {
-+ .start = AT91SAM9RL_ID_UDPHS,
-+ .end = AT91SAM9RL_ID_UDPHS,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
-+ [idx] = { \
-+ .name = nam, \
-+ .index = idx, \
-+ .fifo_size = maxpkt, \
-+ .nr_banks = maxbk, \
-+ .can_dma = dma, \
-+ .can_isoc = isoc, \
-+ }
-+
-+static struct usba_ep_data usba_udc_ep[] __initdata = {
-+ EP("ep0", 0, 64, 1, 0, 0),
-+ EP("ep1", 1, 1024, 2, 1, 1),
-+ EP("ep2", 2, 1024, 2, 1, 1),
-+ EP("ep3", 3, 1024, 3, 1, 0),
-+ EP("ep4", 4, 1024, 3, 1, 0),
-+ EP("ep5", 5, 1024, 3, 1, 1),
-+ EP("ep6", 6, 1024, 3, 1, 1),
-+};
-+
-+#undef EP
-+
-+/*
-+ * pdata doesn't have room for any endpoints, so we need to
-+ * append room for the ones we need right after it.
-+ */
-+static struct {
-+ struct usba_platform_data pdata;
-+ struct usba_ep_data ep[7];
-+} usba_udc_data;
-+
-+static struct platform_device at91_usba_udc_device = {
-+ .name = "atmel_usba_udc",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &usba_udc_data.pdata,
-+ },
-+ .resource = usba_udc_resources,
-+ .num_resources = ARRAY_SIZE(usba_udc_resources),
-+};
-+
-+void __init at91_add_device_usba(struct usba_platform_data *data)
-+{
-+ /*
-+ * Invalid pins are 0 on AT91, but the usba driver is shared
-+ * with AVR32, which use negative values instead. Once/if
-+ * gpio_is_valid() is ported to AT91, revisit this code.
-+ */
-+ usba_udc_data.pdata.vbus_pin = -EINVAL;
-+ usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
-+ memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
-+
-+ if (data && data->vbus_pin > 0) {
-+ at91_set_gpio_input(data->vbus_pin, 0);
-+ at91_set_deglitch(data->vbus_pin, 1);
-+ usba_udc_data.pdata.vbus_pin = data->vbus_pin;
-+ }
-+
-+ /* Pullup pin is handled internally by USB device peripheral */
-+
-+ /* Clocks */
-+ at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
-+ at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
-+
-+ platform_device_register(&at91_usba_udc_device);
-+}
-+#else
-+void __init at91_add_device_usba(struct usba_platform_data *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
- * MMC / SD
- * -------------------------------------------------------------------- */
-
-@@ -105,10 +200,15 @@ static struct at91_nand_data nand_data;
- #define NAND_BASE AT91_CHIPSELECT_3
-
- static struct resource nand_resources[] = {
-- {
-+ [0] = {
- .start = NAND_BASE,
- .end = NAND_BASE + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91_BASE_SYS + AT91_ECC,
-+ .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
-+ .flags = IORESOURCE_MEM,
- }
- };
-
-@@ -385,6 +485,100 @@ void __init at91_add_device_lcdc(struct
-
-
- /* --------------------------------------------------------------------
-+ * Timer/Counter block
-+ * -------------------------------------------------------------------- */
-+
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+static struct resource tcb_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9RL_BASE_TCB0,
-+ .end = AT91SAM9RL_BASE_TCB0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9RL_ID_TC0,
-+ .end = AT91SAM9RL_ID_TC0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [2] = {
-+ .start = AT91SAM9RL_ID_TC1,
-+ .end = AT91SAM9RL_ID_TC1,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [3] = {
-+ .start = AT91SAM9RL_ID_TC2,
-+ .end = AT91SAM9RL_ID_TC2,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9rl_tcb_device = {
-+ .name = "atmel_tcb",
-+ .id = 0,
-+ .resource = tcb_resources,
-+ .num_resources = ARRAY_SIZE(tcb_resources),
-+};
-+
-+static void __init at91_add_device_tc(void)
-+{
-+ /* this chip has a separate clock and irq for each TC channel */
-+ at91_clock_associate("tc0_clk", &at91sam9rl_tcb_device.dev, "t0_clk");
-+ at91_clock_associate("tc1_clk", &at91sam9rl_tcb_device.dev, "t1_clk");
-+ at91_clock_associate("tc2_clk", &at91sam9rl_tcb_device.dev, "t2_clk");
-+ platform_device_register(&at91sam9rl_tcb_device);
-+}
-+#else
-+static void __init at91_add_device_tc(void) { }
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * Touchscreen
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
-+static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
-+
-+static struct resource tsadcc_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9RL_BASE_TSC,
-+ .end = AT91SAM9RL_BASE_TSC + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9RL_ID_TSC,
-+ .end = AT91SAM9RL_ID_TSC,
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct platform_device at91_tsadcc_device = {
-+ .name = "atmel_tsadcc",
-+ .id = -1,
-+ .dev = {
-+ .dma_mask = &tsadcc_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ },
-+ .resource = tsadcc_resources,
-+ .num_resources = ARRAY_SIZE(tsadcc_resources),
-+};
-+
-+void __init at91_add_device_tsadcc(void)
-+{
-+ at91_set_A_periph(AT91_PIN_PA17, 0); /* AD0_XR */
-+ at91_set_A_periph(AT91_PIN_PA18, 0); /* AD1_XL */
-+ at91_set_A_periph(AT91_PIN_PA19, 0); /* AD2_YT */
-+ at91_set_A_periph(AT91_PIN_PA20, 0); /* AD3_TB */
-+
-+ platform_device_register(&at91_tsadcc_device);
-+}
-+#else
-+void __init at91_add_device_tsadcc(void) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
- * RTC
- * -------------------------------------------------------------------- */
-
-@@ -397,6 +591,7 @@ static struct platform_device at91sam9rl
-
- static void __init at91_add_device_rtc(void)
- {
-+ device_init_wakeup(&at91sam9rl_rtc_device.dev, 1);
- platform_device_register(&at91sam9rl_rtc_device);
- }
- #else
-@@ -418,13 +613,14 @@ static struct resource rtt_resources[] =
-
- static struct platform_device at91sam9rl_rtt_device = {
- .name = "at91_rtt",
-- .id = -1,
-+ .id = 0,
- .resource = rtt_resources,
- .num_resources = ARRAY_SIZE(rtt_resources),
- };
-
- static void __init at91_add_device_rtt(void)
- {
-+ device_init_wakeup(&at91sam9rl_rtt_device.dev, 1);
- platform_device_register(&at91sam9rl_rtt_device);
- }
-
-@@ -539,9 +735,6 @@ static inline void configure_ssc1_pins(u
- }
-
- /*
-- * Return the device node so that board init code can use it as the
-- * parent for the device node reflecting how it's used on this board.
-- *
- * SSC controllers are accessed through library code, instead of any
- * kind of all-singing/all-dancing driver. For example one could be
- * used by a particular I2S audio codec's driver, while another one
-@@ -802,7 +995,7 @@ static inline void configure_usart3_pins
- at91_set_B_periph(AT91_PIN_PD3, 0); /* CTS3 */
- }
-
--static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
- struct platform_device *atmel_default_console_device; /* the serial console device */
-
- void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-@@ -893,8 +1086,6 @@ void __init at91_set_serial_console(unsi
- {
- if (portnr < ATMEL_MAX_UART)
- atmel_default_console_device = at91_uarts[portnr];
-- if (!atmel_default_console_device)
-- printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
-
- void __init at91_add_device_serial(void)
-@@ -905,6 +1096,9 @@ void __init at91_add_device_serial(void)
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-+
-+ if (!atmel_default_console_device)
-+ printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
- #else
- void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
-@@ -925,6 +1119,7 @@ static int __init at91_add_standard_devi
- at91_add_device_rtc();
- at91_add_device_rtt();
- at91_add_device_watchdog();
-+ at91_add_device_tc();
- return 0;
- }
-
---- /dev/null
-+++ b/arch/arm/mach-at91/board-cam60.c
-@@ -0,0 +1,180 @@
-+/*
-+ * KwikByte CAM60 (KB9260)
-+ *
-+ * based on board-sam9260ek.c
-+ * Copyright (C) 2005 SAN People
-+ * Copyright (C) 2006 Atmel
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/flash.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#include "generic.h"
-+
-+
-+static void __init cam60_map_io(void)
-+{
-+ /* Initialize processor: 10 MHz crystal */
-+ at91sam9260_initialize(10000000);
-+
-+ /* DGBU on ttyS0. (Rx & Tx only) */
-+ at91_register_uart(0, 0, 0);
-+
-+ /* set serial console to ttyS0 (ie, DBGU) */
-+ at91_set_serial_console(0);
-+}
-+
-+static void __init cam60_init_irq(void)
-+{
-+ at91sam9260_init_interrupts(NULL);
-+}
-+
-+
-+/*
-+ * USB Host
-+ */
-+static struct at91_usbh_data __initdata cam60_usbh_data = {
-+ .ports = 1,
-+};
-+
-+
-+/*
-+ * SPI devices.
-+ */
-+#if defined(CONFIG_MTD_DATAFLASH)
-+static struct mtd_partition __initdata cam60_spi_partitions[] = {
-+ {
-+ .name = "BOOT1",
-+ .offset = 0,
-+ .size = 4 * 1056,
-+ },
-+ {
-+ .name = "BOOT2",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 256 * 1056,
-+ },
-+ {
-+ .name = "kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 2222 * 1056,
-+ },
-+ {
-+ .name = "file system",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+static struct flash_platform_data __initdata cam60_spi_flash_platform_data = {
-+ .name = "spi_flash",
-+ .parts = cam60_spi_partitions,
-+ .nr_parts = ARRAY_SIZE(cam60_spi_partitions)
-+};
-+#endif
-+
-+static struct spi_board_info cam60_spi_devices[] = {
-+#if defined(CONFIG_MTD_DATAFLASH)
-+ { /* DataFlash chip */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 0,
-+ .max_speed_hz = 15 * 1000 * 1000,
-+ .bus_num = 0,
-+ .platform_data = &cam60_spi_flash_platform_data
-+ },
-+#endif
-+};
-+
-+
-+/*
-+ * MACB Ethernet device
-+ */
-+static struct __initdata at91_eth_data cam60_macb_data = {
-+ .phy_irq_pin = AT91_PIN_PB5,
-+ .is_rmii = 0,
-+};
-+
-+
-+/*
-+ * NAND Flash
-+ */
-+static struct mtd_partition __initdata cam60_nand_partition[] = {
-+ {
-+ .name = "nand_fs",
-+ .offset = 0,
-+ .size = MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-+{
-+ *num_partitions = ARRAY_SIZE(cam60_nand_partition);
-+ return cam60_nand_partition;
-+}
-+
-+static struct at91_nand_data __initdata cam60_nand_data = {
-+ .ale = 21,
-+ .cle = 22,
-+ // .det_pin = ... not there
-+ .rdy_pin = AT91_PIN_PA9,
-+ .enable_pin = AT91_PIN_PA7,
-+ .partition_info = nand_partitions,
-+};
-+
-+
-+static void __init cam60_board_init(void)
-+{
-+ /* Serial */
-+ at91_add_device_serial();
-+ /* SPI */
-+ at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices));
-+ /* Ethernet */
-+ at91_add_device_eth(&cam60_macb_data);
-+ /* USB Host */
-+ /* enable USB power supply circuit */
-+ at91_set_gpio_output(AT91_PIN_PB18, 1);
-+ at91_add_device_usbh(&cam60_usbh_data);
-+ /* NAND */
-+ at91_add_device_nand(&cam60_nand_data);
-+}
-+
-+MACHINE_START(CAM60, "KwikByte CAM60")
-+ /* Maintainer: KwikByte */
-+ .phys_io = AT91_BASE_SYS,
-+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+ .boot_params = AT91_SDRAM_BASE + 0x100,
-+ .timer = &at91sam926x_timer,
-+ .map_io = cam60_map_io,
-+ .init_irq = cam60_init_irq,
-+ .init_machine = cam60_board_init,
-+MACHINE_END
---- a/arch/arm/mach-at91/board-cap9adk.c
-+++ b/arch/arm/mach-at91/board-cap9adk.c
-@@ -36,16 +36,14 @@
- #include <asm/hardware.h>
- #include <asm/setup.h>
- #include <asm/mach-types.h>
--#include <asm/irq.h>
-
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
--#include <asm/mach/irq.h>
-
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
- #include <asm/arch/at91cap9_matrix.h>
--#include <asm/arch/at91sam926x_mc.h>
-+#include <asm/arch/at91sam9_smc.h>
-
- #include "generic.h"
-
-@@ -78,6 +76,12 @@ static struct at91_usbh_data __initdata
- .ports = 2,
- };
-
-+/*
-+ * USB HS Device port
-+ */
-+static struct usba_platform_data __initdata cap9adk_usba_udc_data = {
-+ .vbus_pin = AT91_PIN_PB31,
-+};
-
- /*
- * ADS7846 Touchscreen
-@@ -130,7 +134,7 @@ static struct spi_board_info cap9adk_spi
- {
- .modalias = "ads7846",
- .chip_select = 3, /* can be 2 or 3, depending on J2 jumper */
-- .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
-+ .max_speed_hz = 125000 * 16, /* max sample rate * clocks per sample */
- .bus_num = 0,
- .platform_data = &ads_info,
- .irq = AT91_PIN_PC4,
-@@ -324,8 +328,9 @@ static void __init cap9adk_board_init(vo
- /* Serial */
- at91_add_device_serial();
- /* USB Host */
-- set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH);
- at91_add_device_usbh(&cap9adk_usbh_data);
-+ /* USB HS */
-+ at91_add_device_usba(&cap9adk_usba_udc_data);
- /* SPI */
- at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
- /* Touchscreen */
-@@ -341,7 +346,6 @@ static void __init cap9adk_board_init(vo
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* LCD Controller */
-- set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH);
- at91_add_device_lcdc(&cap9adk_lcdc_data);
- /* AC97 */
- at91_add_device_ac97(&cap9adk_ac97_data);
---- a/arch/arm/mach-at91/board-carmeva.c
-+++ b/arch/arm/mach-at91/board-carmeva.c
-@@ -40,24 +40,21 @@
- #include "generic.h"
-
-
--/*
-- * Serial port configuration.
-- * 0 .. 3 = USART0 .. USART3
-- * 4 = DBGU
-- */
--static struct at91_uart_config __initdata carmeva_uart_config = {
-- .console_tty = 0, /* ttyS0 */
-- .nr_tty = 2,
-- .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
--};
--
- static void __init carmeva_map_io(void)
- {
- /* Initialize processor: 20.000 MHz crystal */
- at91rm9200_initialize(20000000, AT91RM9200_BGA);
-
-- /* Setup the serial ports and console */
-- at91_init_serial(&carmeva_uart_config);
-+ /* DBGU on ttyS0. (Rx & Tx only) */
-+ at91_register_uart(0, 0, 0);
-+
-+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-+ | ATMEL_UART_RI);
-+
-+ /* set serial console to ttyS0 (ie, DBGU) */
-+ at91_set_serial_console(0);
- }
-
- static void __init carmeva_init_irq(void)
-@@ -117,6 +114,30 @@ static struct spi_board_info carmeva_spi
- },
- };
-
-+static struct gpio_led carmeva_leds[] = {
-+ { /* "user led 1", LED9 */
-+ .name = "led9",
-+ .gpio = AT91_PIN_PA21,
-+ .active_low = 1,
-+ .default_trigger = "heartbeat",
-+ },
-+ { /* "user led 2", LED10 */
-+ .name = "led10",
-+ .gpio = AT91_PIN_PA25,
-+ .active_low = 1,
-+ },
-+ { /* "user led 3", LED11 */
-+ .name = "led11",
-+ .gpio = AT91_PIN_PA26,
-+ .active_low = 1,
-+ },
-+ { /* "user led 4", LED12 */
-+ .name = "led12",
-+ .gpio = AT91_PIN_PA18,
-+ .active_low = 1,
-+ }
-+};
-+
- static void __init carmeva_board_init(void)
- {
- /* Serial */
-@@ -135,6 +156,8 @@ static void __init carmeva_board_init(vo
- // at91_add_device_cf(&carmeva_cf_data);
- /* MMC */
- at91_add_device_mmc(0, &carmeva_mmc_data);
-+ /* LEDs */
-+ at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds));
- }
-
- MACHINE_START(CARMEVA, "Carmeva")
---- /dev/null
-+++ b/arch/arm/mach-at91/board-chub.c
-@@ -0,0 +1,132 @@
-+/*
-+ * linux/arch/arm/mach-at91/board-chub.c
-+ *
-+ * Copyright (C) 2005 SAN People, adapted for Promwad Chub board
-+ * by Kuten Ivan
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#include "generic.h"
-+
-+/*
-+ * Serial port configuration.
-+ * 0 .. 3 = USART0 .. USART3
-+ * 4 = DBGU
-+ */
-+static struct at91_uart_config __initdata chub_uart_config = {
-+ .console_tty = 0, /* ttyS0 */
-+ .nr_tty = 5,
-+ .tty_map = { 4, 0, 1, 2, 3 } /* ttyS0, ..., ttyS4 */
-+};
-+
-+static void __init chub_init_irq(void)
-+{
-+ at91rm9200_init_interrupts(NULL);
-+}
-+
-+static void __init chub_map_io(void)
-+{
-+ /* Initialize clocks: 18.432 MHz crystal */
-+ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
-+
-+ /* Setup the serial ports and console */
-+ at91_init_serial(&chub_uart_config);
-+}
-+
-+static struct at91_eth_data __initdata chub_eth_data = {
-+ .phy_irq_pin = AT91_PIN_PB29,
-+ .is_rmii = 0,
-+};
-+
-+static struct mtd_partition __initdata chub_nand_partition[] = {
-+ {
-+ .name = "NAND Partition 1",
-+ .offset = 0,
-+ .size = MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-+{
-+ *num_partitions = ARRAY_SIZE(chub_nand_partition);
-+ return chub_nand_partition;
-+}
-+
-+static struct at91_nand_data __initdata chub_nand_data = {
-+ .ale = 22,
-+ .cle = 21,
-+ .enable_pin = AT91_PIN_PA27,
-+ .partition_info = nand_partitions,
-+};
-+
-+static struct spi_board_info chub_spi_devices[] = {
-+ { /* DataFlash chip */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 0,
-+ .max_speed_hz = 15 * 1000 * 1000,
-+ },
-+};
-+
-+static void __init chub_board_init(void)
-+{
-+ /* Serial */
-+ at91_add_device_serial();
-+ /* I2C */
-+ at91_add_device_i2c(NULL, 0);
-+ /* Ethernet */
-+ at91_add_device_eth(&chub_eth_data);
-+ /* SPI */
-+ at91_add_device_spi(chub_spi_devices, ARRAY_SIZE(chub_spi_devices));
-+ /* NAND Flash */
-+ at91_add_device_nand(&chub_nand_data);
-+ /* Disable write protect for NAND */
-+ at91_set_gpio_output(AT91_PIN_PB7, 1);
-+ /* Power enable for 3x RS-232 and 1x RS-485 */
-+ at91_set_gpio_output(AT91_PIN_PB9, 1);
-+ /* Disable write protect for FRAM */
-+ at91_set_gpio_output(AT91_PIN_PA21, 1);
-+ /* Disable write protect for Dataflash */
-+ at91_set_gpio_output(AT91_PIN_PA19, 1);
-+}
-+
-+MACHINE_START(CHUB, "Promwad Chub")
-+ /* Maintainer: Ivan Kuten AT Promwad DOT com */
-+ .phys_io = AT91_BASE_SYS,
-+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+ .boot_params = AT91_SDRAM_BASE + 0x100,
-+ .timer = &at91rm9200_timer,
-+ .map_io = chub_map_io,
-+ .init_irq = chub_init_irq,
-+ .init_machine = chub_board_init,
-+MACHINE_END
---- a/arch/arm/mach-at91/board-csb337.c
-+++ b/arch/arm/mach-at91/board-csb337.c
-@@ -61,6 +61,7 @@ static void __init csb337_map_io(void)
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-+ at91_set_gpio_output(AT91_PIN_PB2, 1); /* third (unused) LED */
-
- /* Setup the serial ports and console */
- at91_init_serial(&csb337_uart_config);
-@@ -202,11 +203,11 @@ static struct platform_device csb300_but
-
- static void __init csb300_add_device_buttons(void)
- {
-- at91_set_gpio_input(AT91_PIN_PB29, 0); /* sw0 */
-+ at91_set_gpio_input(AT91_PIN_PB29, 1); /* sw0 */
- at91_set_deglitch(AT91_PIN_PB29, 1);
-- at91_set_gpio_input(AT91_PIN_PB28, 0); /* sw1 */
-+ at91_set_gpio_input(AT91_PIN_PB28, 1); /* sw1 */
- at91_set_deglitch(AT91_PIN_PB28, 1);
-- at91_set_gpio_input(AT91_PIN_PA21, 0); /* sw2 */
-+ at91_set_gpio_input(AT91_PIN_PA21, 1); /* sw2 */
- at91_set_deglitch(AT91_PIN_PA21, 1);
-
- platform_device_register(&csb300_button_device);
-@@ -233,7 +234,7 @@ static struct gpio_led csb_leds[] = {
- .gpio = AT91_PIN_PB0,
- .active_low = 1,
- .default_trigger = "ide-disk",
-- },
-+ }
- };
-
-
---- a/arch/arm/mach-at91/board-csb637.c
-+++ b/arch/arm/mach-at91/board-csb637.c
-@@ -40,27 +40,16 @@
- #include "generic.h"
-
-
--/*
-- * Serial port configuration.
-- * 0 .. 3 = USART0 .. USART3
-- * 4 = DBGU
-- */
--static struct at91_uart_config __initdata csb637_uart_config = {
-- .console_tty = 0, /* ttyS0 */
-- .nr_tty = 2,
-- .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
--};
--
- static void __init csb637_map_io(void)
- {
- /* Initialize processor: 3.6864 MHz crystal */
- at91rm9200_initialize(3686400, AT91RM9200_BGA);
-
-- /* Setup the LEDs */
-- at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-+ /* DBGU on ttyS0. (Rx & Tx only) */
-+ at91_register_uart(0, 0, 0);
-
-- /* Setup the serial ports and console */
-- at91_init_serial(&csb637_uart_config);
-+ /* make console=ttyS0 (ie, DBGU) the default */
-+ at91_set_serial_console(0);
- }
-
- static void __init csb637_init_irq(void)
-@@ -118,8 +107,19 @@ static struct platform_device csb_flash
- .num_resources = ARRAY_SIZE(csb_flash_resources),
- };
-
-+static struct gpio_led csb_leds[] = {
-+ { /* "d1", red */
-+ .name = "d1",
-+ .gpio = AT91_PIN_PB2,
-+ .active_low = 1,
-+ .default_trigger = "heartbeat",
-+ }
-+};
-+
- static void __init csb637_board_init(void)
- {
-+ /* LED(s) */
-+ at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
- /* Serial */
- at91_add_device_serial();
- /* Ethernet */
---- a/arch/arm/mach-at91/board-dk.c
-+++ b/arch/arm/mach-at91/board-dk.c
-@@ -25,6 +25,7 @@
- #include <linux/init.h>
- #include <linux/mm.h>
- #include <linux/module.h>
-+#include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
- #include <linux/mtd/physmap.h>
-@@ -45,17 +46,6 @@
- #include "generic.h"
-
-
--/*
-- * Serial port configuration.
-- * 0 .. 3 = USART0 .. USART3
-- * 4 = DBGU
-- */
--static struct at91_uart_config __initdata dk_uart_config = {
-- .console_tty = 0, /* ttyS0 */
-- .nr_tty = 2,
-- .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
--};
--
- static void __init dk_map_io(void)
- {
- /* Initialize processor: 18.432 MHz crystal */
-@@ -64,8 +54,16 @@ static void __init dk_map_io(void)
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
-- /* Setup the serial ports and console */
-- at91_init_serial(&dk_uart_config);
-+ /* DBGU on ttyS0. (Rx & Tx only) */
-+ at91_register_uart(0, 0, 0);
-+
-+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-+ | ATMEL_UART_RI);
-+
-+ /* set serial console to ttyS0 (ie, DBGU) */
-+ at91_set_serial_console(0);
- }
-
- static void __init dk_init_irq(void)
-@@ -73,6 +71,185 @@ static void __init dk_init_irq(void)
- at91rm9200_init_interrupts(NULL);
- }
-
-+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
-+#include <video/s1d13xxxfb.h>
-+#include <asm/arch/ics1523.h>
-+
-+/* EPSON S1D13806 FB */
-+#define AT91_FB_REG_BASE 0x30000000L
-+#define AT91_FB_REG_SIZE 0x200
-+#define AT91_FB_VMEM_BASE 0x30200000L
-+#define AT91_FB_VMEM_SIZE 0x140000L
-+
-+static void dk_init_video(void)
-+{
-+ /* NWAIT Signal */
-+ at91_set_A_periph(AT91_PIN_PC6, 0);
-+
-+ /* Initialization of the Static Memory Controller for Chip Select 2 */
-+ at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */
-+ | AT91_SMC_WSEN | AT91_SMC_NWS_(4) /* wait states */
-+ | AT91_SMC_TDF_(1) /* float time */
-+ );
-+
-+ at91_ics1523_init();
-+}
-+
-+/* CRT: (active) 640x480 60Hz (PCLK=CLKI=25.175MHz)
-+ Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
-+static const struct s1d13xxxfb_regval dk_s1dfb_initregs[] = {
-+ {S1DREG_MISC, 0x00}, /* Enable Memory/Register select bit */
-+ {S1DREG_COM_DISP_MODE, 0x00}, /* disable display output */
-+ {S1DREG_GPIO_CNF0, 0x00},
-+ {S1DREG_GPIO_CNF1, 0x00},
-+ {S1DREG_GPIO_CTL0, 0x08},
-+ {S1DREG_GPIO_CTL1, 0x00},
-+ {S1DREG_CLK_CNF, 0x01}, /* no divide, MCLK source is CLKI3 0x02*/
-+ {S1DREG_LCD_CLK_CNF, 0x00},
-+ {S1DREG_CRT_CLK_CNF, 0x00},
-+ {S1DREG_MPLUG_CLK_CNF, 0x00},
-+ {S1DREG_CPU2MEM_WST_SEL, 0x01}, /* 2*period(MCLK) - 4ns > period(BCLK) */
-+ {S1DREG_SDRAM_REF_RATE, 0x03}, /* 32768 <= MCLK <= 50000 (MHz) */
-+ {S1DREG_SDRAM_TC0, 0x00}, /* MCLK source freq (MHz): */
-+ {S1DREG_SDRAM_TC1, 0x01}, /* 42 <= MCLK <= 50 */
-+ {S1DREG_MEM_CNF, 0x80}, /* SDRAM Initialization - needed before mem access */
-+ {S1DREG_PANEL_TYPE, 0x25}, /* std TFT 16bit, 8bit SCP format 2, single passive LCD */
-+ {S1DREG_MOD_RATE, 0x00}, /* toggle every FPFRAME */
-+ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* 680 pix */
-+ {S1DREG_LCD_NDISP_HPER, 0x12}, /* 152 pix */
-+ {S1DREG_TFT_FPLINE_START, 0x01}, /* 13 pix */
-+ {S1DREG_TFT_FPLINE_PWIDTH, 0x0B}, /* 96 pix */
-+ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF},
-+ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* 480 lines */
-+ {S1DREG_LCD_NDISP_VPER, 0x2C}, /* 44 lines */
-+ {S1DREG_TFT_FPFRAME_START, 0x0A}, /* 10 lines */
-+ {S1DREG_TFT_FPFRAME_PWIDTH, 0x01}, /* 2 lines */
-+ {S1DREG_LCD_DISP_MODE, 0x05}, /* 16 bpp */
-+ {S1DREG_LCD_MISC, 0x00}, /* dithering enabled, dual panel buffer enabled */
-+ {S1DREG_LCD_DISP_START0, 0x00},
-+ {S1DREG_LCD_DISP_START1, 0xC8},
-+ {S1DREG_LCD_DISP_START2, 0x00},
-+ {S1DREG_LCD_MEM_OFF0, 0x80},
-+ {S1DREG_LCD_MEM_OFF1, 0x02},
-+ {S1DREG_LCD_PIX_PAN, 0x00},
-+ {S1DREG_LCD_DISP_FIFO_HTC, 0x3B},
-+ {S1DREG_LCD_DISP_FIFO_LTC, 0x3C},
-+ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* 680 pix */
-+ {S1DREG_CRT_NDISP_HPER, 0x13}, /* 160 pix */
-+ {S1DREG_CRT_HRTC_START, 0x01}, /* 13 pix */
-+ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* 96 pix */
-+ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF},
-+ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* 480 lines */
-+ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* 44 lines */
-+ {S1DREG_CRT_VRTC_START, 0x09}, /* 10 lines */
-+ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* 2 lines */
-+ {S1DREG_TV_OUT_CTL, 0x10},
-+ {S1DREG_CRT_DISP_MODE, 0x05}, /* 16 bpp */
-+ {S1DREG_CRT_DISP_START0, 0x00},
-+ {S1DREG_CRT_DISP_START1, 0x00},
-+ {S1DREG_CRT_DISP_START2, 0x00},
-+ {S1DREG_CRT_MEM_OFF0, 0x80},
-+ {S1DREG_CRT_MEM_OFF1, 0x02},
-+ {S1DREG_CRT_PIX_PAN, 0x00},
-+ {S1DREG_CRT_DISP_FIFO_HTC, 0x3B},
-+ {S1DREG_CRT_DISP_FIFO_LTC, 0x3C},
-+ {S1DREG_LCD_CUR_CTL, 0x00}, /* inactive */
-+ {S1DREG_LCD_CUR_START, 0x01},
-+ {S1DREG_LCD_CUR_XPOS0, 0x00},
-+ {S1DREG_LCD_CUR_XPOS1, 0x00},
-+ {S1DREG_LCD_CUR_YPOS0, 0x00},
-+ {S1DREG_LCD_CUR_YPOS1, 0x00},
-+ {S1DREG_LCD_CUR_BCTL0, 0x00},
-+ {S1DREG_LCD_CUR_GCTL0, 0x00},
-+ {S1DREG_LCD_CUR_RCTL0, 0x00},
-+ {S1DREG_LCD_CUR_BCTL1, 0x1F},
-+ {S1DREG_LCD_CUR_GCTL1, 0x3F},
-+ {S1DREG_LCD_CUR_RCTL1, 0x1F},
-+ {S1DREG_LCD_CUR_FIFO_HTC, 0x00},
-+ {S1DREG_CRT_CUR_CTL, 0x00}, /* inactive */
-+ {S1DREG_CRT_CUR_START, 0x01},
-+ {S1DREG_CRT_CUR_XPOS0, 0x00},
-+ {S1DREG_CRT_CUR_XPOS1, 0x00},
-+ {S1DREG_CRT_CUR_YPOS0, 0x00},
-+ {S1DREG_CRT_CUR_YPOS1, 0x00},
-+ {S1DREG_CRT_CUR_BCTL0, 0x00},
-+ {S1DREG_CRT_CUR_GCTL0, 0x00},
-+ {S1DREG_CRT_CUR_RCTL0, 0x00},
-+ {S1DREG_CRT_CUR_BCTL1, 0x1F},
-+ {S1DREG_CRT_CUR_GCTL1, 0x3F},
-+ {S1DREG_CRT_CUR_RCTL1, 0x1F},
-+ {S1DREG_CRT_CUR_FIFO_HTC, 0x00},
-+ {S1DREG_BBLT_CTL0, 0x00},
-+ {S1DREG_BBLT_CTL0, 0x00},
-+ {S1DREG_BBLT_CC_EXP, 0x00},
-+ {S1DREG_BBLT_OP, 0x00},
-+ {S1DREG_BBLT_SRC_START0, 0x00},
-+ {S1DREG_BBLT_SRC_START1, 0x00},
-+ {S1DREG_BBLT_SRC_START2, 0x00},
-+ {S1DREG_BBLT_DST_START0, 0x00},
-+ {S1DREG_BBLT_DST_START1, 0x00},
-+ {S1DREG_BBLT_DST_START2, 0x00},
-+ {S1DREG_BBLT_MEM_OFF0, 0x00},
-+ {S1DREG_BBLT_MEM_OFF1, 0x00},
-+ {S1DREG_BBLT_WIDTH0, 0x00},
-+ {S1DREG_BBLT_WIDTH1, 0x00},
-+ {S1DREG_BBLT_HEIGHT0, 0x00},
-+ {S1DREG_BBLT_HEIGHT1, 0x00},
-+ {S1DREG_BBLT_BGC0, 0x00},
-+ {S1DREG_BBLT_BGC1, 0x00},
-+ {S1DREG_BBLT_FGC0, 0x00},
-+ {S1DREG_BBLT_FGC1, 0x00},
-+ {S1DREG_LKUP_MODE, 0x00}, /* LCD LUT r | LCD and CRT/TV LUT w */
-+ {S1DREG_LKUP_ADDR, 0x00},
-+ {S1DREG_PS_CNF, 0x00}, /* Power Save disable */
-+ {S1DREG_PS_STATUS, 0x02}, /* LCD Panel down, mem up */
-+ {S1DREG_CPU2MEM_WDOGT, 0x00},
-+ {S1DREG_COM_DISP_MODE, 0x02}, /* enable CRT display output */
-+};
-+
-+static struct s1d13xxxfb_pdata dk_s1dfb_pdata = {
-+ .initregs = dk_s1dfb_initregs,
-+ .initregssize = ARRAY_SIZE(dk_s1dfb_initregs),
-+ .platform_init_video = dk_init_video,
-+};
-+
-+static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
-+
-+static struct resource dk_s1dfb_resource[] = {
-+ [0] = { /* video mem */
-+ .name = "s1d13806 memory",
-+ .start = AT91_FB_VMEM_BASE,
-+ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = { /* video registers */
-+ .name = "s1d13806 registers",
-+ .start = AT91_FB_REG_BASE,
-+ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct platform_device dk_s1dfb_device = {
-+ .name = "s1d13806fb",
-+ .id = -1,
-+ .dev = {
-+ .dma_mask = &s1dfb_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &dk_s1dfb_pdata,
-+ },
-+ .resource = dk_s1dfb_resource,
-+ .num_resources = ARRAY_SIZE(dk_s1dfb_resource),
-+};
-+
-+static void __init dk_add_device_video(void)
-+{
-+ platform_device_register(&dk_s1dfb_device);
-+}
-+#else
-+static void __init dk_add_device_video(void) {}
-+#endif
-+
- static struct at91_eth_data __initdata dk_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-@@ -164,7 +341,7 @@ static struct at91_nand_data __initdata
- #define DK_FLASH_SIZE 0x200000
-
- static struct physmap_flash_data dk_flash_data = {
-- .width = 2,
-+ .width = 2,
- };
-
- static struct resource dk_flash_resource = {
-@@ -223,8 +400,12 @@ static void __init dk_board_init(void)
- platform_device_register(&dk_flash);
- /* LEDs */
- at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
-+ /* SSC (to LM4549 audio codec) */
-+ at91_add_device_ssc(AT91RM9200_ID_SSC1, ATMEL_SSC_TD | ATMEL_SSC_RX);
-+ /* SSC (to SI3021 line interface) */
-+ at91_add_device_ssc(AT91RM9200_ID_SSC2, ATMEL_SSC_TD | ATMEL_SSC_TK | ATMEL_SSC_RD | ATMEL_SSC_RF);
- /* VGA */
--// dk_add_device_video();
-+ dk_add_device_video();
- }
-
- MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
---- a/arch/arm/mach-at91/board-eb9200.c
-+++ b/arch/arm/mach-at91/board-eb9200.c
-@@ -40,24 +40,24 @@
- #include "generic.h"
-
-
--/*
-- * Serial port configuration.
-- * 0 .. 3 = USART0 .. USART3
-- * 4 = DBGU
-- */
--static struct at91_uart_config __initdata eb9200_uart_config = {
-- .console_tty = 0, /* ttyS0 */
-- .nr_tty = 2,
-- .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
--};
--
- static void __init eb9200_map_io(void)
- {
- /* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000, AT91RM9200_BGA);
-
-- /* Setup the serial ports and console */
-- at91_init_serial(&eb9200_uart_config);
-+ /* DBGU on ttyS0. (Rx & Tx only) */
-+ at91_register_uart(0, 0, 0);
-+
-+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-+ | ATMEL_UART_RI);
-+
-+ /* USART2 on ttyS2. (Rx, Tx) - IRDA */
-+ at91_register_uart(AT91RM9200_ID_US2, 2, 0);
-+
-+ /* set serial console to ttyS0 (ie, DBGU) */
-+ at91_set_serial_console(0);
- }
-
- static void __init eb9200_init_irq(void)
---- /dev/null
-+++ b/arch/arm/mach-at91/board-ecbat91.c
-@@ -0,0 +1,178 @@
-+/*
-+ * linux/arch/arm/mach-at91rm9200/board-ecbat91.c
-+ * Copyright (C) 2007 emQbit.com.
-+ *
-+ * We started from board-dk.c, which is Copyright (C) 2005 SAN People.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/flash.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#include "generic.h"
-+
-+
-+static void __init ecb_at91map_io(void)
-+{
-+ /* Initialize processor: 18.432 MHz crystal */
-+ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
-+
-+ /* Setup the LEDs */
-+ at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
-+
-+ /* DBGU on ttyS0. (Rx & Tx only) */
-+ at91_register_uart(0, 0, 0);
-+
-+ /* USART0 on ttyS1. (Rx & Tx only) */
-+ at91_register_uart(AT91RM9200_ID_US0, 1, 0);
-+
-+ /* set serial console to ttyS0 (ie, DBGU) */
-+ at91_set_serial_console(0);
-+}
-+
-+static void __init ecb_at91init_irq(void)
-+{
-+ at91rm9200_init_interrupts(NULL);
-+}
-+
-+static struct at91_eth_data __initdata ecb_at91eth_data = {
-+ .phy_irq_pin = AT91_PIN_PC4,
-+ .is_rmii = 0,
-+};
-+
-+static struct at91_usbh_data __initdata ecb_at91usbh_data = {
-+ .ports = 1,
-+};
-+
-+static struct at91_mmc_data __initdata ecb_at91mmc_data = {
-+ .slot_b = 0,
-+ .wire4 = 1,
-+};
-+
-+
-+#if defined(CONFIG_MTD_DATAFLASH)
-+static struct mtd_partition __initdata my_flash0_partitions[] =
-+{
-+ { /* 0x8400 */
-+ .name = "Darrell-loader",
-+ .offset = 0,
-+ .size = 12* 1056,
-+ },
-+ {
-+ .name = "U-boot",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 110 * 1056,
-+ },
-+ { /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
-+ .name = "Uoot-env",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 8 * 1056,
-+ },
-+ { /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
-+ .name = "Kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 1534 * 1056,
-+ },
-+ { /* 190200 - jffs2 root filesystem */
-+ .name = "Filesystem",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL, /* 26 sectors */
-+ }
-+};
-+
-+static struct flash_platform_data __initdata my_flash0_platform = {
-+ .name = "Removable flash card",
-+ .parts = my_flash0_partitions,
-+ .nr_parts = ARRAY_SIZE(my_flash0_partitions)
-+};
-+
-+#endif
-+
-+static struct spi_board_info __initdata ecb_at91spi_devices[] = {
-+ { /* DataFlash chip */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 0,
-+ .max_speed_hz = 10 * 1000 * 1000,
-+ .bus_num = 0,
-+#if defined(CONFIG_MTD_DATAFLASH)
-+ .platform_data = &my_flash0_platform,
-+#endif
-+ },
-+ { /* User accessable spi - cs1 (250KHz) */
-+ .modalias = "spi-cs1",
-+ .chip_select = 1,
-+ .max_speed_hz = 250 * 1000,
-+ },
-+ { /* User accessable spi - cs2 (1MHz) */
-+ .modalias = "spi-cs2",
-+ .chip_select = 2,
-+ .max_speed_hz = 1 * 1000 * 1000,
-+ },
-+ { /* User accessable spi - cs3 (10MHz) */
-+ .modalias = "spi-cs3",
-+ .chip_select = 3,
-+ .max_speed_hz = 10 * 1000 * 1000,
-+ },
-+};
-+
-+static void __init ecb_at91board_init(void)
-+{
-+ /* Serial */
-+ at91_add_device_serial();
-+
-+ /* Ethernet */
-+ at91_add_device_eth(&ecb_at91eth_data);
-+
-+ /* USB Host */
-+ at91_add_device_usbh(&ecb_at91usbh_data);
-+
-+ /* I2C */
-+ at91_add_device_i2c(NULL, 0);
-+
-+ /* MMC */
-+ at91_add_device_mmc(0, &ecb_at91mmc_data);
-+
-+ /* SPI */
-+ at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices));
-+}
-+
-+MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
-+ /* Maintainer: emQbit.com */
-+ .phys_io = AT91_BASE_SYS,
-+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+ .boot_params = AT91_SDRAM_BASE + 0x100,
-+ .timer = &at91rm9200_timer,
-+ .map_io = ecb_at91map_io,
-+ .init_irq = ecb_at91init_irq,
-+ .init_machine = ecb_at91board_init,
-+MACHINE_END
---- a/arch/arm/mach-at91/board-ek.c
-+++ b/arch/arm/mach-at91/board-ek.c
-@@ -25,6 +25,7 @@
- #include <linux/init.h>
- #include <linux/mm.h>
- #include <linux/module.h>
-+#include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
- #include <linux/mtd/physmap.h>
-@@ -45,17 +46,6 @@
- #include "generic.h"
-
-
--/*
-- * Serial port configuration.
-- * 0 .. 3 = USART0 .. USART3
-- * 4 = DBGU
-- */
--static struct at91_uart_config __initdata ek_uart_config = {
-- .console_tty = 0, /* ttyS0 */
-- .nr_tty = 2,
-- .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
--};
--
- static void __init ek_map_io(void)
- {
- /* Initialize processor: 18.432 MHz crystal */
-@@ -64,8 +54,16 @@ static void __init ek_map_io(void)
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
-
-- /* Setup the serial ports and console */
-- at91_init_serial(&ek_uart_config);
-+ /* DBGU on ttyS0. (Rx & Tx only) */
-+ at91_register_uart(0, 0, 0);
-+
-+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-+ | ATMEL_UART_RI);
-+
-+ /* set serial console to ttyS0 (ie, DBGU) */
-+ at91_set_serial_console(0);
- }
-
- static void __init ek_init_irq(void)
-@@ -73,6 +71,187 @@ static void __init ek_init_irq(void)
- at91rm9200_init_interrupts(NULL);
- }
-
-+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
-+#include <video/s1d13xxxfb.h>
-+#include <asm/arch/ics1523.h>
-+
-+/* EPSON S1D13806 FB */
-+#define AT91_FB_REG_BASE 0x40000000L
-+#define AT91_FB_REG_SIZE 0x200
-+#define AT91_FB_VMEM_BASE 0x40200000L
-+#define AT91_FB_VMEM_SIZE 0x140000L
-+
-+static void ek_init_video(void)
-+{
-+ /* NWAIT Signal */
-+ at91_set_A_periph(AT91_PIN_PC6, 0);
-+
-+ /* Initialization of the Static Memory Controller for Chip Select 3 */
-+ at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_DBW_16 /* 16 bit */
-+ | AT91_SMC_WSEN | AT91_SMC_NWS_(5) /* wait states */
-+ | AT91_SMC_TDF_(1) /* float time */
-+ );
-+
-+ at91_ics1523_init();
-+}
-+
-+/* CRT: (active) 640x480 60Hz (PCLK=CLKI=25.175MHz)
-+ Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
-+static const struct s1d13xxxfb_regval ek_s1dfb_initregs[] = {
-+ {S1DREG_MISC, 0x00}, /* Enable Memory/Register select bit */
-+ {S1DREG_COM_DISP_MODE, 0x00}, /* disable display output */
-+ {S1DREG_GPIO_CNF0, 0xFF}, // 0x00
-+ {S1DREG_GPIO_CNF1, 0x1F}, // 0x08
-+ {S1DREG_GPIO_CTL0, 0x00},
-+ {S1DREG_GPIO_CTL1, 0x00},
-+ {S1DREG_CLK_CNF, 0x01}, /* no divide, MCLK source is CLKI3 0x02*/
-+ {S1DREG_LCD_CLK_CNF, 0x00},
-+ {S1DREG_CRT_CLK_CNF, 0x00},
-+ {S1DREG_MPLUG_CLK_CNF, 0x00},
-+ {S1DREG_CPU2MEM_WST_SEL, 0x01}, /* 2*period(MCLK) - 4ns > period(BCLK) */
-+ {S1DREG_SDRAM_REF_RATE, 0x03}, /* 32768 <= MCLK <= 50000 (MHz) */
-+ {S1DREG_SDRAM_TC0, 0x00}, /* MCLK source freq (MHz): */
-+ {S1DREG_SDRAM_TC1, 0x01}, /* 42 <= MCLK <= 50 */
-+ {S1DREG_MEM_CNF, 0x80}, /* SDRAM Initialization - needed before mem access */
-+ {S1DREG_PANEL_TYPE, 0x25}, /* std TFT 16bit, 8bit SCP format 2, single passive LCD */
-+ {S1DREG_MOD_RATE, 0x00}, /* toggle every FPFRAME */
-+ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* 680 pix */
-+ {S1DREG_LCD_NDISP_HPER, 0x12}, /* 152 pix */
-+ {S1DREG_TFT_FPLINE_START, 0x01}, /* 13 pix */
-+ {S1DREG_TFT_FPLINE_PWIDTH, 0x0B}, /* 96 pix */
-+ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF},
-+ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* 480 lines */
-+ {S1DREG_LCD_NDISP_VPER, 0x2C}, /* 44 lines */
-+ {S1DREG_TFT_FPFRAME_START, 0x0A}, /* 10 lines */
-+ {S1DREG_TFT_FPFRAME_PWIDTH, 0x01}, /* 2 lines */
-+ {S1DREG_LCD_DISP_MODE, 0x05}, /* 16 bpp */
-+ {S1DREG_LCD_MISC, 0x00}, /* dithering enabled, dual panel buffer enabled */
-+ {S1DREG_LCD_DISP_START0, 0x00},
-+ {S1DREG_LCD_DISP_START1, 0xC8},
-+ {S1DREG_LCD_DISP_START2, 0x00},
-+ {S1DREG_LCD_MEM_OFF0, 0x80},
-+ {S1DREG_LCD_MEM_OFF1, 0x02},
-+ {S1DREG_LCD_PIX_PAN, 0x00},
-+ {S1DREG_LCD_DISP_FIFO_HTC, 0x3B},
-+ {S1DREG_LCD_DISP_FIFO_LTC, 0x3C},
-+ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* 680 pix */
-+ {S1DREG_CRT_NDISP_HPER, 0x13}, /* 160 pix */
-+ {S1DREG_CRT_HRTC_START, 0x01}, /* 13 pix */
-+ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* 96 pix */
-+ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF},
-+ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* 480 lines */
-+ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* 44 lines */
-+ {S1DREG_CRT_VRTC_START, 0x09}, /* 10 lines */
-+ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* 2 lines */
-+ {S1DREG_TV_OUT_CTL, 0x10},
-+ {0x005E, 0x9F},
-+ {0x005F, 0x00},
-+ {S1DREG_CRT_DISP_MODE, 0x05}, /* 16 bpp */
-+ {S1DREG_CRT_DISP_START0, 0x00},
-+ {S1DREG_CRT_DISP_START1, 0x00},
-+ {S1DREG_CRT_DISP_START2, 0x00},
-+ {S1DREG_CRT_MEM_OFF0, 0x80},
-+ {S1DREG_CRT_MEM_OFF1, 0x02},
-+ {S1DREG_CRT_PIX_PAN, 0x00},
-+ {S1DREG_CRT_DISP_FIFO_HTC, 0x3B},
-+ {S1DREG_CRT_DISP_FIFO_LTC, 0x3C},
-+ {S1DREG_LCD_CUR_CTL, 0x00}, /* inactive */
-+ {S1DREG_LCD_CUR_START, 0x01},
-+ {S1DREG_LCD_CUR_XPOS0, 0x00},
-+ {S1DREG_LCD_CUR_XPOS1, 0x00},
-+ {S1DREG_LCD_CUR_YPOS0, 0x00},
-+ {S1DREG_LCD_CUR_YPOS1, 0x00},
-+ {S1DREG_LCD_CUR_BCTL0, 0x00},
-+ {S1DREG_LCD_CUR_GCTL0, 0x00},
-+ {S1DREG_LCD_CUR_RCTL0, 0x00},
-+ {S1DREG_LCD_CUR_BCTL1, 0x1F},
-+ {S1DREG_LCD_CUR_GCTL1, 0x3F},
-+ {S1DREG_LCD_CUR_RCTL1, 0x1F},
-+ {S1DREG_LCD_CUR_FIFO_HTC, 0x00},
-+ {S1DREG_CRT_CUR_CTL, 0x00}, /* inactive */
-+ {S1DREG_CRT_CUR_START, 0x01},
-+ {S1DREG_CRT_CUR_XPOS0, 0x00},
-+ {S1DREG_CRT_CUR_XPOS1, 0x00},
-+ {S1DREG_CRT_CUR_YPOS0, 0x00},
-+ {S1DREG_CRT_CUR_YPOS1, 0x00},
-+ {S1DREG_CRT_CUR_BCTL0, 0x00},
-+ {S1DREG_CRT_CUR_GCTL0, 0x00},
-+ {S1DREG_CRT_CUR_RCTL0, 0x00},
-+ {S1DREG_CRT_CUR_BCTL1, 0x1F},
-+ {S1DREG_CRT_CUR_GCTL1, 0x3F},
-+ {S1DREG_CRT_CUR_RCTL1, 0x1F},
-+ {S1DREG_CRT_CUR_FIFO_HTC, 0x00},
-+ {S1DREG_BBLT_CTL0, 0x00},
-+ {S1DREG_BBLT_CTL0, 0x00},
-+ {S1DREG_BBLT_CC_EXP, 0x00},
-+ {S1DREG_BBLT_OP, 0x00},
-+ {S1DREG_BBLT_SRC_START0, 0x00},
-+ {S1DREG_BBLT_SRC_START1, 0x00},
-+ {S1DREG_BBLT_SRC_START2, 0x00},
-+ {S1DREG_BBLT_DST_START0, 0x00},
-+ {S1DREG_BBLT_DST_START1, 0x00},
-+ {S1DREG_BBLT_DST_START2, 0x00},
-+ {S1DREG_BBLT_MEM_OFF0, 0x00},
-+ {S1DREG_BBLT_MEM_OFF1, 0x00},
-+ {S1DREG_BBLT_WIDTH0, 0x00},
-+ {S1DREG_BBLT_WIDTH1, 0x00},
-+ {S1DREG_BBLT_HEIGHT0, 0x00},
-+ {S1DREG_BBLT_HEIGHT1, 0x00},
-+ {S1DREG_BBLT_BGC0, 0x00},
-+ {S1DREG_BBLT_BGC1, 0x00},
-+ {S1DREG_BBLT_FGC0, 0x00},
-+ {S1DREG_BBLT_FGC1, 0x00},
-+ {S1DREG_LKUP_MODE, 0x00}, /* LCD LUT r | LCD and CRT/TV LUT w */
-+ {S1DREG_LKUP_ADDR, 0x00},
-+ {S1DREG_PS_CNF, 0x10}, /* Power Save disable */
-+ {S1DREG_PS_STATUS, 0x02}, /* LCD Panel down, mem up */
-+ {S1DREG_CPU2MEM_WDOGT, 0x00},
-+ {S1DREG_COM_DISP_MODE, 0x02}, /* enable CRT display output */
-+};
-+
-+static struct s1d13xxxfb_pdata ek_s1dfb_pdata = {
-+ .initregs = ek_s1dfb_initregs,
-+ .initregssize = ARRAY_SIZE(ek_s1dfb_initregs),
-+ .platform_init_video = ek_init_video,
-+};
-+
-+static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
-+
-+static struct resource ek_s1dfb_resource[] = {
-+ [0] = { /* video mem */
-+ .name = "s1d13806 memory",
-+ .start = AT91_FB_VMEM_BASE,
-+ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = { /* video registers */
-+ .name = "s1d13806 registers",
-+ .start = AT91_FB_REG_BASE,
-+ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct platform_device ek_s1dfb_device = {
-+ .name = "s1d13806fb",
-+ .id = -1,
-+ .dev = {
-+ .dma_mask = &s1dfb_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &ek_s1dfb_pdata,
-+ },
-+ .resource = ek_s1dfb_resource,
-+ .num_resources = ARRAY_SIZE(ek_s1dfb_resource),
-+};
-+
-+static void __init ek_add_device_video(void)
-+{
-+ platform_device_register(&ek_s1dfb_device);
-+}
-+#else
-+static void __init ek_add_device_video(void) {}
-+#endif
-+
- static struct at91_eth_data __initdata ek_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-@@ -122,7 +301,7 @@ static struct i2c_board_info __initdata
- #define EK_FLASH_SIZE 0x200000
-
- static struct physmap_flash_data ek_flash_data = {
-- .width = 2,
-+ .width = 2,
- };
-
- static struct resource ek_flash_resource = {
-@@ -189,7 +368,7 @@ static void __init ek_board_init(void)
- /* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- /* VGA */
--// ek_add_device_video();
-+ ek_add_device_video();
- }
-
- MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
---- /dev/null
-+++ b/arch/arm/mach-at91/board-homematic.c
-@@ -0,0 +1,163 @@
-+/*
-+ * linux/arch/arm/mach-at91/board-homematic.c
-+ *
-+ * Copyright (C) 2007 eQ-3 Entwicklung GmbH
-+ *
-+ * based on work
-+ * Copyright (C) 2005 SAN People
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/mtd/physmap.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91rm9200_mc.h>
-+
-+#include "generic.h"
-+
-+
-+/*
-+ * Serial port configuration.
-+ * 0 .. 3 = USART0 .. USART3
-+ * 4 = DBGU
-+ */
-+static struct at91_uart_config __initdata homematic_uart_config = {
-+ .console_tty = 0, /* ttyS0 */
-+ .nr_tty = 2,
-+ .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
-+};
-+
-+static void __init homematic_map_io(void)
-+{
-+ /* Initialize processor: 18.432 MHz crystal */
-+ at91rm9200_initialize(18432000, AT91RM9200_BGA);
-+
-+ /* Setup the serial ports and console */
-+ at91_init_serial(&homematic_uart_config);
-+}
-+
-+static void __init homematic_init_irq(void)
-+{
-+ at91rm9200_init_interrupts(NULL);
-+}
-+
-+static struct at91_eth_data __initdata homematic_eth_data = {
-+ .phy_irq_pin = AT91_PIN_PC4,
-+ .is_rmii = 0,
-+};
-+
-+static struct at91_usbh_data __initdata homematic_usbh_data = {
-+ .ports = 2,
-+};
-+
-+static struct at91_udc_data __initdata homematic_udc_data = {
-+ .vbus_pin = AT91_PIN_PD4,
-+ .pullup_pin = AT91_PIN_PD5,
-+};
-+
-+static struct at91_mmc_data __initdata homematic_mmc_data = {
-+ .slot_b = 0,
-+ .wire4 = 1,
-+};
-+
-+static struct spi_board_info homematic_spi_devices[] = {
-+ { /* DataFlash chip */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 0,
-+ .max_speed_hz = 15 * 1000 * 1000,
-+ },
-+};
-+
-+static struct mtd_partition __initdata homematic_nand_partition[] = {
-+ {
-+ .name = "root",
-+ .offset = 0,
-+ .size = 0x02000000,
-+ }, {
-+ .name = "storage",
-+ .offset = 0x02000000,
-+ .size = MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-+{
-+ *num_partitions = ARRAY_SIZE(homematic_nand_partition);
-+ return homematic_nand_partition;
-+}
-+
-+static struct at91_nand_data __initdata homematic_nand_data = {
-+ .ale = 22,
-+ .cle = 21,
-+// .det_pin = AT91_PIN_PB1,
-+ .rdy_pin = AT91_PIN_PC2,
-+ .enable_pin = AT91_PIN_PC0,
-+ .partition_info = nand_partitions,
-+};
-+
-+static void __init homematic_board_init(void)
-+{
-+ /* Serial */
-+ at91_add_device_serial();
-+ /* Ethernet */
-+ at91_add_device_eth(&homematic_eth_data);
-+ /* USB Host */
-+ at91_add_device_usbh(&homematic_usbh_data);
-+ /* USB Device */
-+ at91_add_device_udc(&homematic_udc_data);
-+ at91_set_multi_drive(homematic_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
-+ /* I2C */
-+ at91_add_device_i2c(NULL, 0);
-+ /* SPI */
-+ at91_add_device_spi(homematic_spi_devices, ARRAY_SIZE(homematic_spi_devices));
-+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-+ /* DataFlash card */
-+ at91_set_gpio_output(AT91_PIN_PB7, 0);
-+#else
-+ /* MMC */
-+ at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
-+ at91_add_device_mmc(0, &homematic_mmc_data);
-+#endif
-+ /* NAND */
-+ at91_add_device_nand(&homematic_nand_data);
-+}
-+
-+MACHINE_START(HOMEMATIC, "HomeMatic")
-+ /* Maintainer: eQ-3 */
-+ .phys_io = AT91_BASE_SYS,
-+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+ .boot_params = AT91_SDRAM_BASE + 0x100,
-+ .timer = &at91rm9200_timer,
-+ .map_io = homematic_map_io,
-+ .init_irq = homematic_init_irq,
-+ .init_machine = homematic_board_init,
-+MACHINE_END
---- a/arch/arm/mach-at91/board-kb9202.c
-+++ b/arch/arm/mach-at91/board-kb9202.c
-@@ -37,19 +37,10 @@
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
-
--#include "generic.h"
-+#include <asm/arch/at91rm9200_mc.h>
-
-+#include "generic.h"
-
--/*
-- * Serial port configuration.
-- * 0 .. 3 = USART0 .. USART3
-- * 4 = DBGU
-- */
--static struct at91_uart_config __initdata kb9202_uart_config = {
-- .console_tty = 0, /* ttyS0 */
-- .nr_tty = 3,
-- .tty_map = { 4, 0, 1, -1, -1 } /* ttyS0, ..., ttyS4 */
--};
-
- static void __init kb9202_map_io(void)
- {
-@@ -59,8 +50,20 @@ static void __init kb9202_map_io(void)
- /* Set up the LEDs */
- at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
-
-- /* Setup the serial ports and console */
-- at91_init_serial(&kb9202_uart_config);
-+ /* DBGU on ttyS0. (Rx & Tx only) */
-+ at91_register_uart(0, 0, 0);
-+
-+ /* USART0 on ttyS1 (Rx & Tx only) */
-+ at91_register_uart(AT91RM9200_ID_US0, 1, 0);
-+
-+ /* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
-+ at91_register_uart(AT91RM9200_ID_US1, 2, 0);
-+
-+ /* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
-+ at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-+
-+ /* set serial console to ttyS0 (ie, DBGU) */
-+ at91_set_serial_console(0);
- }
-
- static void __init kb9202_init_irq(void)
-@@ -111,6 +114,48 @@ static struct at91_nand_data __initdata
- .partition_info = nand_partitions,
- };
-
-+
-+#if defined(CONFIG_FB_S1D15605)
-+#warning "The Reset pin must be passed via platform_data, not this way"
-+static struct resource kb9202_lcd_resources[] = {
-+ [0] = {
-+ .start = AT91_CHIPSELECT_2,
-+ .end = AT91_CHIPSELECT_2 + 0x200FF,
-+ .flags = IORESOURCE_MEM
-+ },
-+ [1] = { /* reset pin */
-+ .start = AT91_PIN_PC22,
-+ .end = AT91_PIN_PC22,
-+ .flags = IORESOURCE_MEM
-+ },
-+};
-+
-+static struct platform_device kb9202_lcd_device = {
-+ .name = "s1d15605fb",
-+ .id = 0,
-+ .num_resources = ARRAY_SIZE(kb9202_lcd_resources),
-+ .resource = kb9202_lcd_resources,
-+};
-+
-+static void __init kb9202_add_device_lcd(void)
-+{
-+ /* In case the boot loader did not set the chip select mode and timing */
-+ at91_sys_write(AT91_SMC_CSR(2),
-+ AT91_SMC_WSEN | AT91_SMC_NWS_(18) | AT91_SMC_TDF_(1) | AT91_SMC_DBW_8 |
-+ AT91_SMC_RWSETUP_(1) | AT91_SMC_RWHOLD_(1));
-+
-+ /* Backlight pin = output, off */
-+ at91_set_gpio_output(AT91_PIN_PC23, 0);
-+
-+ /* Reset pin = output, in reset */
-+ at91_set_gpio_output(AT91_PIN_PC22, 0);
-+
-+ platform_device_register(&kb9202_lcd_device);
-+}
-+#else
-+static void __init kb9202_add_device_lcd(void) {}
-+#endif
-+
- static void __init kb9202_board_init(void)
- {
- /* Serial */
-@@ -129,6 +174,8 @@ static void __init kb9202_board_init(voi
- at91_add_device_spi(NULL, 0);
- /* NAND */
- at91_add_device_nand(&kb9202_nand_data);
-+ /* LCD */
-+ kb9202_add_device_lcd();
- }
-
- MACHINE_START(KB9200, "KB920x")
---- /dev/null
-+++ b/arch/arm/mach-at91/board-qil-a9260.c
-@@ -0,0 +1,255 @@
-+/*
-+ * linux/arch/arm/mach-at91/board-qil-a9260.c
-+ *
-+ * Copyright (C) 2005 SAN People
-+ * Copyright (C) 2006 Atmel
-+ * Copyright (C) 2007 Calao-systems
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
-+#include <linux/clk.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91_shdwc.h>
-+
-+#include "generic.h"
-+
-+
-+static void __init ek_map_io(void)
-+{
-+ /* Initialize processor: 12.000 MHz crystal */
-+ at91sam9260_initialize(12000000);
-+
-+ /* DGBU on ttyS0. (Rx & Tx only) */
-+ at91_register_uart(0, 0, 0);
-+
-+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-+ | ATMEL_UART_RI);
-+
-+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
-+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-+
-+ /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
-+ at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-+
-+ /* set serial console to ttyS1 (ie, USART0) */
-+ at91_set_serial_console(1);
-+
-+}
-+
-+static void __init ek_init_irq(void)
-+{
-+ at91sam9260_init_interrupts(NULL);
-+}
-+
-+
-+/*
-+ * USB Host port
-+ */
-+static struct at91_usbh_data __initdata ek_usbh_data = {
-+ .ports = 2,
-+};
-+
-+/*
-+ * USB Device port
-+ */
-+static struct at91_udc_data __initdata ek_udc_data = {
-+ .vbus_pin = AT91_PIN_PC5,
-+ .pullup_pin = 0, /* pull-up driven by UDC */
-+};
-+
-+/*
-+ * SPI devices.
-+ */
-+static struct spi_board_info ek_spi_devices[] = {
-+#if defined(CONFIG_RTC_DRV_M41T94)
-+ { /* M41T94 RTC */
-+ .modalias = "m41t94",
-+ .chip_select = 0,
-+ .max_speed_hz = 1 * 1000 * 1000,
-+ .bus_num = 0,
-+ }
-+#endif
-+};
-+
-+/*
-+ * MACB Ethernet device
-+ */
-+static struct at91_eth_data __initdata ek_macb_data = {
-+ .phy_irq_pin = AT91_PIN_PA31,
-+ .is_rmii = 1,
-+};
-+
-+/*
-+ * NAND flash
-+ */
-+static struct mtd_partition __initdata ek_nand_partition[] = {
-+ {
-+ .name = "Uboot & Kernel",
-+ .offset = 0x00000000,
-+ .size = 16 * 1024 * 1024,
-+ },
-+ {
-+ .name = "Root FS",
-+ .offset = 0x01000000,
-+ .size = 120 * 1024 * 1024,
-+ },
-+ {
-+ .name = "FS",
-+ .offset = 0x08800000,
-+ .size = 120 * 1024 * 1024,
-+ },
-+};
-+
-+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-+{
-+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
-+ return ek_nand_partition;
-+}
-+
-+static struct at91_nand_data __initdata ek_nand_data = {
-+ .ale = 21,
-+ .cle = 22,
-+// .det_pin = ... not connected
-+ .rdy_pin = AT91_PIN_PC13,
-+ .enable_pin = AT91_PIN_PC14,
-+ .partition_info = nand_partitions,
-+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
-+ .bus_width_16 = 1,
-+#else
-+ .bus_width_16 = 0,
-+#endif
-+};
-+
-+/*
-+ * MCI (SD/MMC)
-+ */
-+static struct at91_mmc_data __initdata ek_mmc_data = {
-+ .slot_b = 0,
-+ .wire4 = 1,
-+// .det_pin = ... not connected
-+// .wp_pin = ... not connected
-+// .vcc_pin = ... not connected
-+};
-+
-+/*
-+ * GPIO Buttons
-+ */
-+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-+static struct gpio_keys_button ek_buttons[] = {
-+ { /* USER PUSH BUTTON */
-+ .code = KEY_ENTER,
-+ .gpio = AT91_PIN_PB10,
-+ .active_low = 1,
-+ .desc = "user_pb",
-+ .wakeup = 1,
-+ }
-+};
-+
-+static struct gpio_keys_platform_data ek_button_data = {
-+ .buttons = ek_buttons,
-+ .nbuttons = ARRAY_SIZE(ek_buttons),
-+};
-+
-+static struct platform_device ek_button_device = {
-+ .name = "gpio-keys",
-+ .id = -1,
-+ .num_resources = 0,
-+ .dev = {
-+ .platform_data = &ek_button_data,
-+ }
-+};
-+
-+static void __init ek_add_device_buttons(void)
-+{
-+ at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */
-+ at91_set_deglitch(AT91_PIN_PB10, 1);
-+
-+ platform_device_register(&ek_button_device);
-+}
-+#else
-+static void __init ek_add_device_buttons(void) {}
-+#endif
-+
-+/*
-+ * LEDs
-+ */
-+static struct gpio_led ek_leds[] = {
-+ { /* user_led (green) */
-+ .name = "user_led",
-+ .gpio = AT91_PIN_PB21,
-+ .active_low = 0,
-+ .default_trigger = "heartbeat",
-+ }
-+};
-+
-+static void __init ek_board_init(void)
-+{
-+ /* Serial */
-+ at91_add_device_serial();
-+ /* USB Host */
-+ at91_add_device_usbh(&ek_usbh_data);
-+ /* USB Device */
-+ at91_add_device_udc(&ek_udc_data);
-+ /* SPI */
-+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-+ /* NAND */
-+ at91_add_device_nand(&ek_nand_data);
-+ /* I2C */
-+ at91_add_device_i2c(NULL, 0);
-+ /* Ethernet */
-+ at91_add_device_eth(&ek_macb_data);
-+ /* MMC */
-+ at91_add_device_mmc(0, &ek_mmc_data);
-+ /* Push Buttons */
-+ ek_add_device_buttons();
-+ /* LEDs */
-+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-+ /* shutdown controller, wakeup button (5 msec low) */
-+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
-+ | AT91_SHDW_RTTWKEN);
-+}
-+
-+MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
-+ /* Maintainer: calao-systems */
-+ .phys_io = AT91_BASE_SYS,
-+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+ .boot_params = AT91_SDRAM_BASE + 0x100,
-+ .timer = &at91sam926x_timer,
-+ .map_io = ek_map_io,
-+ .init_irq = ek_init_irq,
-+ .init_machine = ek_board_init,
-+MACHINE_END
---- /dev/null
-+++ b/arch/arm/mach-at91/board-sam9-l9260.c
-@@ -0,0 +1,199 @@
-+/*
-+ * linux/arch/arm/mach-at91/board-sam9-l9260.c
-+ *
-+ * Copyright (C) 2005 SAN People
-+ * Copyright (C) 2006 Atmel
-+ * Copyright (C) 2007 Olimex Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#include "generic.h"
-+
-+
-+static void __init ek_map_io(void)
-+{
-+ /* Initialize processor: 18.432 MHz crystal */
-+ at91sam9260_initialize(18432000);
-+
-+ /* Setup the LEDs */
-+ at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
-+
-+ /* DBGU on ttyS0. (Rx & Tx only) */
-+ at91_register_uart(0, 0, 0);
-+
-+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-+ | ATMEL_UART_RI);
-+
-+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
-+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-+
-+ /* set serial console to ttyS0 (ie, DBGU) */
-+ at91_set_serial_console(0);
-+}
-+
-+static void __init ek_init_irq(void)
-+{
-+ at91sam9260_init_interrupts(NULL);
-+}
-+
-+
-+/*
-+ * USB Host port
-+ */
-+static struct at91_usbh_data __initdata ek_usbh_data = {
-+ .ports = 2,
-+};
-+
-+/*
-+ * USB Device port
-+ */
-+static struct at91_udc_data __initdata ek_udc_data = {
-+ .vbus_pin = AT91_PIN_PC5,
-+ .pullup_pin = 0, /* pull-up driven by UDC */
-+};
-+
-+
-+/*
-+ * SPI devices.
-+ */
-+static struct spi_board_info ek_spi_devices[] = {
-+#if !defined(CONFIG_MMC_AT91)
-+ { /* DataFlash chip */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 1,
-+ .max_speed_hz = 15 * 1000 * 1000,
-+ .bus_num = 0,
-+ },
-+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-+ { /* DataFlash card */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 0,
-+ .max_speed_hz = 15 * 1000 * 1000,
-+ .bus_num = 0,
-+ },
-+#endif
-+#endif
-+};
-+
-+
-+/*
-+ * MACB Ethernet device
-+ */
-+static struct at91_eth_data __initdata ek_macb_data = {
-+ .phy_irq_pin = AT91_PIN_PA7,
-+ .is_rmii = 0,
-+};
-+
-+
-+/*
-+ * NAND flash
-+ */
-+static struct mtd_partition __initdata ek_nand_partition[] = {
-+ {
-+ .name = "Bootloader Area",
-+ .offset = 0,
-+ .size = 10 * 1024 * 1024,
-+ },
-+ {
-+ .name = "User Area",
-+ .offset = 10 * 1024 * 1024,
-+ .size = MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-+{
-+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
-+ return ek_nand_partition;
-+}
-+
-+static struct at91_nand_data __initdata ek_nand_data = {
-+ .ale = 21,
-+ .cle = 22,
-+// .det_pin = ... not connected
-+ .rdy_pin = AT91_PIN_PC13,
-+ .enable_pin = AT91_PIN_PC14,
-+ .partition_info = nand_partitions,
-+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
-+ .bus_width_16 = 1,
-+#else
-+ .bus_width_16 = 0,
-+#endif
-+};
-+
-+
-+/*
-+ * MCI (SD/MMC)
-+ */
-+static struct at91_mmc_data __initdata ek_mmc_data = {
-+ .slot_b = 1,
-+ .wire4 = 1,
-+ .det_pin = AT91_PIN_PC8,
-+ .wp_pin = AT91_PIN_PC4,
-+// .vcc_pin = ... not connected
-+};
-+
-+static void __init ek_board_init(void)
-+{
-+ /* Serial */
-+ at91_add_device_serial();
-+ /* USB Host */
-+ at91_add_device_usbh(&ek_usbh_data);
-+ /* USB Device */
-+ at91_add_device_udc(&ek_udc_data);
-+ /* SPI */
-+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-+ /* NAND */
-+ at91_add_device_nand(&ek_nand_data);
-+ /* Ethernet */
-+ at91_add_device_eth(&ek_macb_data);
-+ /* MMC */
-+ at91_add_device_mmc(0, &ek_mmc_data);
-+ /* I2C */
-+ at91_add_device_i2c(NULL, 0);
-+}
-+
-+MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
-+ /* Maintainer: Olimex */
-+ .phys_io = AT91_BASE_SYS,
-+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+ .boot_params = AT91_SDRAM_BASE + 0x100,
-+ .timer = &at91sam926x_timer,
-+ .map_io = ek_map_io,
-+ .init_irq = ek_init_irq,
-+ .init_machine = ek_board_init,
-+MACHINE_END
---- a/arch/arm/mach-at91/board-sam9260ek.c
-+++ b/arch/arm/mach-at91/board-sam9260ek.c
-@@ -25,6 +25,10 @@
- #include <linux/module.h>
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
-+#include <linux/spi/at73c213.h>
-+#include <linux/clk.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
-
- #include <asm/hardware.h>
- #include <asm/setup.h>
-@@ -37,29 +41,29 @@
-
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
--#include <asm/arch/at91sam926x_mc.h>
-+#include <asm/arch/at91_shdwc.h>
-
- #include "generic.h"
-
-
--/*
-- * Serial port configuration.
-- * 0 .. 5 = USART0 .. USART5
-- * 6 = DBGU
-- */
--static struct at91_uart_config __initdata ek_uart_config = {
-- .console_tty = 0, /* ttyS0 */
-- .nr_tty = 3,
-- .tty_map = { 6, 0, 1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */
--};
--
- static void __init ek_map_io(void)
- {
- /* Initialize processor: 18.432 MHz crystal */
- at91sam9260_initialize(18432000);
-
-- /* Setup the serial ports and console */
-- at91_init_serial(&ek_uart_config);
-+ /* DGBU on ttyS0. (Rx & Tx only) */
-+ at91_register_uart(0, 0, 0);
-+
-+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-+ | ATMEL_UART_RI);
-+
-+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-+
-+ /* set serial console to ttyS0 (ie, DBGU) */
-+ at91_set_serial_console(0);
- }
-
- static void __init ek_init_irq(void)
-@@ -85,6 +89,35 @@ static struct at91_udc_data __initdata e
-
-
- /*
-+ * Audio
-+ */
-+static struct at73c213_board_info at73c213_data = {
-+ .ssc_id = 0,
-+ .shortname = "AT91SAM9260-EK external DAC",
-+};
-+
-+#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
-+static void __init at73c213_set_clk(struct at73c213_board_info *info)
-+{
-+ struct clk *pck0;
-+ struct clk *plla;
-+
-+ pck0 = clk_get(NULL, "pck0");
-+ plla = clk_get(NULL, "plla");
-+
-+ /* AT73C213 MCK Clock */
-+ at91_set_B_periph(AT91_PIN_PC1, 0); /* PCK0 */
-+
-+ clk_set_parent(pck0, plla);
-+ clk_put(plla);
-+
-+ info->dac_clk = pck0;
-+}
-+#else
-+static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
-+#endif
-+
-+/*
- * SPI devices.
- */
- static struct spi_board_info ek_spi_devices[] = {
-@@ -110,6 +143,8 @@ static struct spi_board_info ek_spi_devi
- .chip_select = 0,
- .max_speed_hz = 10 * 1000 * 1000,
- .bus_num = 1,
-+ .mode = SPI_MODE_1,
-+ .platform_data = &at73c213_data,
- },
- #endif
- };
-@@ -172,6 +207,74 @@ static struct at91_mmc_data __initdata e
- // .vcc_pin = ... not connected
- };
-
-+
-+/*
-+ * LEDs
-+ */
-+static struct gpio_led ek_leds[] = {
-+ { /* "bottom" led, green, userled1 to be defined */
-+ .name = "ds5",
-+ .gpio = AT91_PIN_PA6,
-+ .active_low = 1,
-+ .default_trigger = "none",
-+ },
-+ { /* "power" led, yellow */
-+ .name = "ds1",
-+ .gpio = AT91_PIN_PA9,
-+ .default_trigger = "heartbeat",
-+ }
-+};
-+
-+
-+/*
-+ * GPIO Buttons
-+ */
-+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-+static struct gpio_keys_button ek_buttons[] = {
-+ {
-+ .gpio = AT91_PIN_PA30,
-+ .code = BTN_3,
-+ .desc = "Button 3",
-+ .active_low = 1,
-+ .wakeup = 1,
-+ },
-+ {
-+ .gpio = AT91_PIN_PA31,
-+ .code = BTN_4,
-+ .desc = "Button 4",
-+ .active_low = 1,
-+ .wakeup = 1,
-+ }
-+};
-+
-+static struct gpio_keys_platform_data ek_button_data = {
-+ .buttons = ek_buttons,
-+ .nbuttons = ARRAY_SIZE(ek_buttons),
-+};
-+
-+static struct platform_device ek_button_device = {
-+ .name = "gpio-keys",
-+ .id = -1,
-+ .num_resources = 0,
-+ .dev = {
-+ .platform_data = &ek_button_data,
-+ }
-+};
-+
-+static void __init ek_add_device_buttons(void)
-+{
-+ at91_set_gpio_input(AT91_PIN_PA30, 1); /* btn3 */
-+ at91_set_deglitch(AT91_PIN_PA30, 1);
-+ at91_set_gpio_input(AT91_PIN_PA31, 1); /* btn4 */
-+ at91_set_deglitch(AT91_PIN_PA31, 1);
-+
-+ platform_device_register(&ek_button_device);
-+}
-+#else
-+static void __init ek_add_device_buttons(void) {}
-+#endif
-+
-+
- static void __init ek_board_init(void)
- {
- /* Serial */
-@@ -190,6 +293,16 @@ static void __init ek_board_init(void)
- at91_add_device_mmc(0, &ek_mmc_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
-+ /* SSC (to AT73C213) */
-+ at73c213_set_clk(&at73c213_data);
-+ at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
-+ /* LEDs */
-+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-+ /* Push Buttons */
-+ ek_add_device_buttons();
-+ /* shutdown controller, wakeup button (5 msec low) */
-+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
-+ | AT91_SHDW_RTTWKEN);
- }
-
- MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
---- a/arch/arm/mach-at91/board-sam9261ek.c
-+++ b/arch/arm/mach-at91/board-sam9261ek.c
-@@ -26,6 +26,8 @@
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
- #include <linux/spi/ads7846.h>
-+#include <linux/spi/at73c213.h>
-+#include <linux/clk.h>
- #include <linux/dm9000.h>
- #include <linux/fb.h>
- #include <linux/gpio_keys.h>
-@@ -44,22 +46,12 @@
-
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
--#include <asm/arch/at91sam926x_mc.h>
-+#include <asm/arch/at91sam9_smc.h>
-+#include <asm/arch/at91_shdwc.h>
-
- #include "generic.h"
-
-
--/*
-- * Serial port configuration.
-- * 0 .. 2 = USART0 .. USART2
-- * 3 = DBGU
-- */
--static struct at91_uart_config __initdata ek_uart_config = {
-- .console_tty = 0, /* ttyS0 */
-- .nr_tty = 1,
-- .tty_map = { 3, -1, -1, -1 } /* ttyS0, ..., ttyS3 */
--};
--
- static void __init ek_map_io(void)
- {
- /* Initialize processor: 18.432 MHz crystal */
-@@ -68,8 +60,11 @@ static void __init ek_map_io(void)
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
-
-- /* Setup the serial ports and console */
-- at91_init_serial(&ek_uart_config);
-+ /* DGBU on ttyS0. (Rx & Tx only) */
-+ at91_register_uart(0, 0, 0);
-+
-+ /* set serial console to ttyS0 (ie, DBGU) */
-+ at91_set_serial_console(0);
- }
-
- static void __init ek_init_irq(void)
-@@ -239,6 +234,35 @@ static void __init ek_add_device_ts(void
- #endif
-
- /*
-+ * Audio
-+ */
-+static struct at73c213_board_info at73c213_data = {
-+ .ssc_id = 1,
-+ .shortname = "AT91SAM9261-EK external DAC",
-+};
-+
-+#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
-+static void __init at73c213_set_clk(struct at73c213_board_info *info)
-+{
-+ struct clk *pck2;
-+ struct clk *plla;
-+
-+ pck2 = clk_get(NULL, "pck2");
-+ plla = clk_get(NULL, "plla");
-+
-+ /* AT73C213 MCK Clock */
-+ at91_set_B_periph(AT91_PIN_PB31, 0); /* PCK2 */
-+
-+ clk_set_parent(pck2, plla);
-+ clk_put(plla);
-+
-+ info->dac_clk = pck2;
-+}
-+#else
-+static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
-+#endif
-+
-+/*
- * SPI devices
- */
- static struct spi_board_info ek_spi_devices[] = {
-@@ -252,10 +276,11 @@ static struct spi_board_info ek_spi_devi
- {
- .modalias = "ads7846",
- .chip_select = 2,
-- .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
-+ .max_speed_hz = 125000 * 16, /* max sample rate * clocks per sample */
- .bus_num = 0,
- .platform_data = &ads_info,
- .irq = AT91SAM9261_ID_IRQ0,
-+ .controller_data = (void *) AT91_PIN_PA28, /* CS pin */
- },
- #endif
- #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-@@ -271,6 +296,9 @@ static struct spi_board_info ek_spi_devi
- .chip_select = 3,
- .max_speed_hz = 10 * 1000 * 1000,
- .bus_num = 0,
-+ .mode = SPI_MODE_1,
-+ .platform_data = &at73c213_data,
-+ .controller_data = (void*) AT91_PIN_PA29, /* default for CS3 is PA6, but it must be PA29 */
- },
- #endif
- };
-@@ -408,24 +436,28 @@ static struct gpio_keys_button ek_button
- .code = BTN_0,
- .desc = "Button 0",
- .active_low = 1,
-+ .wakeup = 1,
- },
- {
- .gpio = AT91_PIN_PA26,
- .code = BTN_1,
- .desc = "Button 1",
- .active_low = 1,
-+ .wakeup = 1,
- },
- {
- .gpio = AT91_PIN_PA25,
- .code = BTN_2,
- .desc = "Button 2",
- .active_low = 1,
-+ .wakeup = 1,
- },
- {
- .gpio = AT91_PIN_PA24,
- .code = BTN_3,
- .desc = "Button 3",
- .active_low = 1,
-+ .wakeup = 1,
- }
- };
-
-@@ -445,13 +477,13 @@ static struct platform_device ek_button_
-
- static void __init ek_add_device_buttons(void)
- {
-- at91_set_gpio_input(AT91_PIN_PA27, 0); /* btn0 */
-+ at91_set_gpio_input(AT91_PIN_PA27, 1); /* btn0 */
- at91_set_deglitch(AT91_PIN_PA27, 1);
-- at91_set_gpio_input(AT91_PIN_PA26, 0); /* btn1 */
-+ at91_set_gpio_input(AT91_PIN_PA26, 1); /* btn1 */
- at91_set_deglitch(AT91_PIN_PA26, 1);
-- at91_set_gpio_input(AT91_PIN_PA25, 0); /* btn2 */
-+ at91_set_gpio_input(AT91_PIN_PA25, 1); /* btn2 */
- at91_set_deglitch(AT91_PIN_PA25, 1);
-- at91_set_gpio_input(AT91_PIN_PA24, 0); /* btn3 */
-+ at91_set_gpio_input(AT91_PIN_PA24, 1); /* btn3 */
- at91_set_deglitch(AT91_PIN_PA24, 1);
-
- platform_device_register(&ek_button_device);
-@@ -460,6 +492,29 @@ static void __init ek_add_device_buttons
- static void __init ek_add_device_buttons(void) {}
- #endif
-
-+/*
-+ * LEDs
-+ */
-+static struct gpio_led ek_leds[] = {
-+ { /* "bottom" led, green, userled1 to be defined */
-+ .name = "ds7",
-+ .gpio = AT91_PIN_PA14,
-+ .active_low = 1,
-+ .default_trigger = "none",
-+ },
-+ { /* "top" led, green, userled2 to be defined */
-+ .name = "ds8",
-+ .gpio = AT91_PIN_PA13,
-+ .active_low = 1,
-+ .default_trigger = "none",
-+ },
-+ { /* "power" led, yellow */
-+ .name = "ds1",
-+ .gpio = AT91_PIN_PA23,
-+ .default_trigger = "heartbeat",
-+ }
-+};
-+
- static void __init ek_board_init(void)
- {
- /* Serial */
-@@ -481,6 +536,9 @@ static void __init ek_board_init(void)
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
- /* Touchscreen */
- ek_add_device_ts();
-+ /* SSC (to AT73C213) */
-+ at73c213_set_clk(&at73c213_data);
-+ at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX);
- #else
- /* MMC */
- at91_add_device_mmc(0, &ek_mmc_data);
-@@ -489,6 +547,11 @@ static void __init ek_board_init(void)
- at91_add_device_lcdc(&ek_lcdc_data);
- /* Push Buttons */
- ek_add_device_buttons();
-+ /* LEDs */
-+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-+ /* shutdown controller, wakeup button (5 msec low) */
-+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
-+ | AT91_SHDW_RTTWKEN);
- }
-
- MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
---- a/arch/arm/mach-at91/board-sam9263ek.c
-+++ b/arch/arm/mach-at91/board-sam9263ek.c
-@@ -43,29 +43,24 @@
-
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
--#include <asm/arch/at91sam926x_mc.h>
-+#include <asm/arch/at91_shdwc.h>
-
- #include "generic.h"
-
-
--/*
-- * Serial port configuration.
-- * 0 .. 2 = USART0 .. USART2
-- * 3 = DBGU
-- */
--static struct at91_uart_config __initdata ek_uart_config = {
-- .console_tty = 0, /* ttyS0 */
-- .nr_tty = 2,
-- .tty_map = { 3, 0, -1, -1, } /* ttyS0, ..., ttyS3 */
--};
--
- static void __init ek_map_io(void)
- {
- /* Initialize processor: 16.367 MHz crystal */
- at91sam9263_initialize(16367660);
-
-- /* Setup the serial ports and console */
-- at91_init_serial(&ek_uart_config);
-+ /* DGBU on ttyS0. (Rx & Tx only) */
-+ at91_register_uart(0, 0, 0);
-+
-+ /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
-+ at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-+
-+ /* set serial console to ttyS0 (ie, DBGU) */
-+ at91_set_serial_console(0);
- }
-
- static void __init ek_init_irq(void)
-@@ -141,7 +136,7 @@ static struct spi_board_info ek_spi_devi
- {
- .modalias = "ads7846",
- .chip_select = 3,
-- .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
-+ .max_speed_hz = 125000 * 16, /* max sample rate * clocks per sample */
- .bus_num = 0,
- .platform_data = &ads_info,
- .irq = AT91SAM9263_ID_IRQ1,
-@@ -301,9 +296,9 @@ static struct platform_device ek_button_
-
- static void __init ek_add_device_buttons(void)
- {
-- at91_set_GPIO_periph(AT91_PIN_PC5, 0); /* left button */
-+ at91_set_GPIO_periph(AT91_PIN_PC5, 1); /* left button */
- at91_set_deglitch(AT91_PIN_PC5, 1);
-- at91_set_GPIO_periph(AT91_PIN_PC4, 0); /* right button */
-+ at91_set_GPIO_periph(AT91_PIN_PC4, 1); /* right button */
- at91_set_deglitch(AT91_PIN_PC4, 1);
-
- platform_device_register(&ek_button_device);
-@@ -341,7 +336,7 @@ static struct gpio_led ek_leds[] = {
- .name = "ds3",
- .gpio = AT91_PIN_PB7,
- .default_trigger = "heartbeat",
-- },
-+ }
- };
-
-
-@@ -374,6 +369,9 @@ static void __init ek_board_init(void)
- at91_add_device_ac97(&ek_ac97_data);
- /* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-+ /* shutdown controller, wakeup button (5 msec low) */
-+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
-+ | AT91_SHDW_RTTWKEN);
- }
-
- MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
---- a/arch/arm/mach-at91/board-sam9rlek.c
-+++ b/arch/arm/mach-at91/board-sam9rlek.c
-@@ -29,29 +29,24 @@
-
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
--#include <asm/arch/at91sam926x_mc.h>
-+#include <asm/arch/at91_shdwc.h>
-
- #include "generic.h"
-
-
--/*
-- * Serial port configuration.
-- * 0 .. 3 = USART0 .. USART3
-- * 4 = DBGU
-- */
--static struct at91_uart_config __initdata ek_uart_config = {
-- .console_tty = 0, /* ttyS0 */
-- .nr_tty = 2,
-- .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
--};
--
- static void __init ek_map_io(void)
- {
- /* Initialize processor: 12.000 MHz crystal */
- at91sam9rl_initialize(12000000);
-
-- /* Setup the serial ports and console */
-- at91_init_serial(&ek_uart_config);
-+ /* DGBU on ttyS0. (Rx & Tx only) */
-+ at91_register_uart(0, 0, 0);
-+
-+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
-+ at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-+
-+ /* set serial console to ttyS0 (ie, DBGU) */
-+ at91_set_serial_console(0);
- }
-
- static void __init ek_init_irq(void)
-@@ -61,6 +56,14 @@ static void __init ek_init_irq(void)
-
-
- /*
-+ * USB HS Device port
-+ */
-+static struct usba_platform_data __initdata ek_usba_udc_data = {
-+ .vbus_pin = AT91_PIN_PA8,
-+};
-+
-+
-+/*
- * MCI (SD/MMC)
- */
- static struct at91_mmc_data __initdata ek_mmc_data = {
-@@ -180,6 +183,8 @@ static void __init ek_board_init(void)
- {
- /* Serial */
- at91_add_device_serial();
-+ /* USB HS */
-+ at91_add_device_usba(&ek_usba_udc_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* NAND */
-@@ -190,6 +195,9 @@ static void __init ek_board_init(void)
- at91_add_device_mmc(0, &ek_mmc_data);
- /* LCD Controller */
- at91_add_device_lcdc(&ek_lcdc_data);
-+ /* shutdown controller, wakeup button (5 msec low) */
-+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
-+ | AT91_SHDW_RTTWKEN);
- }
-
- MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
---- /dev/null
-+++ b/arch/arm/mach-at91/board-tms.c
-@@ -0,0 +1,198 @@
-+/*
-+* linux/arch/arm/mach-at91/board-tms.c
-+*
-+* Copyright (C) 2005 SAN People
-+*
-+* Adapted from board-dk to sweda TMS-100 by Luiz de Barros <lboneto@gmail.com>
-+*
-+* This program is free software; you can redistribute it and/or modify
-+* it under the terms of the GNU General Public License as published by
-+* the Free Software Foundation; either version 2 of the License, or
-+* (at your option) any later version.
-+*
-+* This program is distributed in the hope that it will be useful,
-+* but WITHOUT ANY WARRANTY; without even the implied warranty of
-+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+* GNU General Public License for more details.
-+*
-+* You should have received a copy of the GNU General Public License
-+* along with this program; if not, write to the Free Software
-+* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+*/
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/mtd/physmap.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91rm9200_mc.h>
-+
-+#include "generic.h"
-+#include <linux/serial_8250.h>
-+
-+
-+#define SERIAL_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP| UPF_SHARE_IRQ)
-+#define SERIAL_CLK (1843200)
-+
-+
-+/*---------------------------------------------------------------------
-+ * External UART
-+ */
-+
-+#define PORT(_base, _irq) \
-+ { \
-+ .mapbase = _base, \
-+ .irq = _irq, \
-+ .uartclk = SERIAL_CLK, \
-+ .iotype = UPIO_MEM, \
-+ .regshift = 0, \
-+ .flags = SERIAL_FLAGS, \
-+ }
-+
-+static struct plat_serial8250_port tms_data[] = {
-+ PORT(0x70000000, AT91_PIN_PC3),
-+ PORT(0x80000000, AT91_PIN_PC5),
-+ { },
-+};
-+
-+static struct platform_device tms_device = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev =
-+ {
-+ .platform_data = &tms_data,
-+ },
-+};
-+
-+static void setup_external_uart(void)
-+{
-+ at91_sys_write(AT91_SMC_CSR(2),
-+ AT91_SMC_ACSS_STD
-+ | AT91_SMC_DBW_8
-+ | AT91_SMC_BAT
-+ | AT91_SMC_WSEN
-+ | AT91_SMC_NWS_(32) /* wait states */
-+ | AT91_SMC_RWSETUP_(6) /* setup time */
-+ | AT91_SMC_RWHOLD_(4) /* hold time */
-+
-+ );
-+ at91_sys_write(AT91_SMC_CSR(6),
-+ AT91_SMC_ACSS_STD
-+ | AT91_SMC_DBW_8
-+ | AT91_SMC_BAT
-+ | AT91_SMC_WSEN
-+ | AT91_SMC_NWS_(32) /* wait states */
-+ | AT91_SMC_RWSETUP_(6) /* setup time */
-+ | AT91_SMC_RWHOLD_(4) /* hold time */
-+
-+ );
-+ at91_sys_write(AT91_SMC_CSR(7),
-+ AT91_SMC_ACSS_STD
-+ | AT91_SMC_DBW_8
-+ | AT91_SMC_BAT
-+ | AT91_SMC_WSEN
-+ | AT91_SMC_NWS_(32) /* wait states */
-+ | AT91_SMC_RWSETUP_(6) /* setup time */
-+ | AT91_SMC_RWHOLD_(4) /* hold time */
-+ );
-+
-+ platform_device_register(&tms_device);
-+}
-+
-+
-+/*
-+ * Serial port configuration.
-+ * 0 .. 3 = USART0 .. USART3
-+ * 4 = DBGU
-+ */
-+static struct at91_uart_config __initdata tms_uart_config = {
-+ .console_tty = 0, /* ttyS0 */
-+ .nr_tty = 5,
-+ .tty_map = { 4, 0, 1, 2, 3 } /* ttyS0, ..., ttyS4 */
-+};
-+
-+static void __init tms_map_io(void)
-+{
-+ /* Initialize processor: 18.432 MHz crystal */
-+ at91rm9200_initialize(18432000, AT91RM9200_BGA);
-+
-+ /* Setup the LEDs */
-+ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-+
-+ /* Setup the serial ports and console */
-+ at91_init_serial(&tms_uart_config);
-+}
-+
-+static void __init tms_init_irq(void)
-+{
-+ at91rm9200_init_interrupts(NULL);
-+}
-+
-+
-+static struct at91_eth_data __initdata tms_eth_data = {
-+ .phy_irq_pin = AT91_PIN_PC4,
-+ .is_rmii = 1,
-+};
-+
-+static struct at91_usbh_data __initdata tms_usbh_data = {
-+ .ports = 2,
-+};
-+
-+static struct spi_board_info tms_spi_devices[] = {
-+ { /* DataFlash chip */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 0,
-+ .max_speed_hz = 15 * 1000 * 1000,
-+ },
-+ { /* DataFlash chip */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 1,
-+ .max_speed_hz = 15 * 1000 * 1000,
-+ }
-+};
-+
-+static struct i2c_board_info __initdata tms_i2c_devices[] = {
-+ {
-+ I2C_BOARD_INFO("isl1208", 0x6f),
-+ }
-+};
-+
-+static void __init tms_board_init(void)
-+{
-+ /* Serial */
-+ at91_add_device_serial();
-+ /* Ethernet */
-+ at91_add_device_eth(&tms_eth_data);
-+ at91_add_device_usbh(&tms_usbh_data);
-+ /* I2C */
-+ at91_add_device_i2c(tms_i2c_devices, ARRAY_SIZE(tms_i2c_devices));
-+ /* SPI */
-+ at91_add_device_spi(tms_spi_devices, ARRAY_SIZE(tms_spi_devices));
-+ /* Two port external UART */
-+ setup_external_uart();
-+}
-+
-+MACHINE_START(SWEDATMS, "Sweda TMS-100 Board")
-+ /* Maintainer: Luiz de Barros */
-+ .phys_io = AT91_BASE_SYS,
-+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+ .boot_params = AT91_SDRAM_BASE + 0x100,
-+ .timer = &at91rm9200_timer,
-+ .map_io = tms_map_io,
-+ .init_irq = tms_init_irq,
-+ .init_machine = tms_board_init,
-+MACHINE_END
---- /dev/null
-+++ b/arch/arm/mach-at91/board-tt9200.c
-@@ -0,0 +1,192 @@
-+/*
-+ * linux/arch/arm/mach-at91rm9200/board-tt9200.c
-+ * Copyright (C) 2007 Toptechnology
-+ *
-+ * Based on board-ecbat91.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/flash.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#include "generic.h"
-+
-+
-+static void __init tt9200_map_io(void)
-+{
-+ /* Initialize processor: 18.432 MHz crystal */
-+ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
-+
-+ /* Setup the LEDs */
-+ at91_init_leds(AT91_PIN_PB27, AT91_PIN_PB27);
-+
-+ /* DBGU on ttyS0. (Rx & Tx only) */
-+ at91_register_uart(0, 0, 0);
-+
-+ /* USART0 on ttyS1. (Rx & Tx only) */
-+ at91_register_uart(AT91RM9200_ID_US0, 1, 0);
-+
-+ /* USART1 on ttyS2. (Rx & Tx only) */
-+ at91_register_uart(AT91RM9200_ID_US1, 2, 0);
-+
-+ /* USART2 on ttyS3. (Rx & Tx only) */
-+ at91_register_uart(AT91RM9200_ID_US2, 3, 0);
-+
-+ /* USART3 on ttyS4. (Rx, Tx, CTS, RTS) */
-+ at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS | ATMEL_UART_RTS);
-+
-+ /* Console on ttyS0 (ie, DBGU) */
-+ at91_set_serial_console(0);
-+}
-+
-+static void __init tt9200_init_irq(void)
-+{
-+ at91rm9200_init_interrupts(NULL);
-+}
-+
-+static struct at91_eth_data __initdata tt9200_eth_data = {
-+ .phy_irq_pin = AT91_PIN_PB29,
-+ .is_rmii = 0,
-+};
-+
-+static struct at91_usbh_data __initdata tt9200_usbh_data = {
-+ .ports = 1,
-+};
-+
-+static struct i2c_board_info __initdata tt9200_i2c_devices[] = {
-+ {
-+ I2C_BOARD_INFO("rtc-m41t80", 0x68),
-+ .type = "m41t80",
-+ }
-+};
-+
-+static struct at91_mmc_data __initdata tt9200_mmc_data = {
-+ .slot_b = 0,
-+ .wire4 = 1,
-+};
-+
-+
-+#if defined(CONFIG_MTD_DATAFLASH)
-+static struct mtd_partition __initdata tt9200_flash_partitions[] =
-+{
-+ {
-+ .name = "Darrell",
-+ .offset = 0,
-+ .size = 12 * 1056,
-+ },
-+ {
-+ .name = "U-boot",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 110 * 1056,
-+ },
-+ {
-+ .name = "U-boot env",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 8 * 1056,
-+ },
-+ {
-+ .name = "Kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 1534 * 1056,
-+ },
-+ {
-+ .name = "Filesystem",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL,
-+ }
-+};
-+
-+static struct flash_platform_data __initdata tt9200_flash_platform = {
-+ .name = "SPI Dataflash",
-+ .parts = tt9200_flash_partitions,
-+ .nr_parts = ARRAY_SIZE(tt9200_flash_partitions)
-+};
-+
-+#endif
-+
-+static struct spi_board_info __initdata tt9200_spi_devices[] = {
-+ { /* DataFlash chip */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 0,
-+ /* Errata #13 */
-+ .max_speed_hz = 5 * 1000 * 1000,
-+ .bus_num = 0,
-+#if defined(CONFIG_MTD_DATAFLASH)
-+ .platform_data = &tt9200_flash_platform,
-+#endif
-+ },
-+};
-+
-+static struct gpio_led tt9200_leds[] = {
-+ {
-+ .name = "led0",
-+ .gpio = AT91_PIN_PB27,
-+ .active_low = 1,
-+ .default_trigger = "heartbeat",
-+ }
-+};
-+
-+static void __init tt9200_board_init(void)
-+{
-+ /* Serial */
-+ at91_add_device_serial();
-+
-+ /* Ethernet */
-+ at91_add_device_eth(&tt9200_eth_data);
-+
-+ /* USB Host */
-+ at91_add_device_usbh(&tt9200_usbh_data);
-+
-+ /* I2C */
-+ at91_add_device_i2c(tt9200_i2c_devices, ARRAY_SIZE(tt9200_i2c_devices));
-+
-+ /* MMC */
-+ at91_add_device_mmc(0, &tt9200_mmc_data);
-+
-+ /* LEDS */
-+ at91_gpio_leds(tt9200_leds, ARRAY_SIZE(tt9200_leds));
-+
-+ /* SPI */
-+ at91_add_device_spi(tt9200_spi_devices, ARRAY_SIZE(tt9200_spi_devices));
-+}
-+
-+MACHINE_START(TT9200, "Toptech TT9200")
-+ /* Maintainer: toptech.com.ar */
-+ .phys_io = AT91_BASE_SYS,
-+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+ .boot_params = AT91_SDRAM_BASE + 0x100,
-+ .timer = &at91rm9200_timer,
-+ .map_io = tt9200_map_io,
-+ .init_irq = tt9200_init_irq,
-+ .init_machine = tt9200_board_init,
-+MACHINE_END
---- /dev/null
-+++ b/arch/arm/mach-at91/board-usb-a9260.c
-@@ -0,0 +1,215 @@
-+/*
-+ * linux/arch/arm/mach-at91/board-usb-a9260.c
-+ *
-+ * Copyright (C) 2005 SAN People
-+ * Copyright (C) 2006 Atmel
-+ * Copyright (C) 2007 Calao-systems
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
-+#include <linux/clk.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91_shdwc.h>
-+
-+#include "generic.h"
-+
-+
-+static void __init ek_map_io(void)
-+{
-+ /* Initialize processor: 12.000 MHz crystal */
-+ at91sam9260_initialize(12000000);
-+
-+ /* DGBU on ttyS0. (Rx & Tx only) */
-+ at91_register_uart(0, 0, 0);
-+
-+ /* set serial console to ttyS0 (ie, DBGU) */
-+ at91_set_serial_console(0);
-+}
-+
-+static void __init ek_init_irq(void)
-+{
-+ at91sam9260_init_interrupts(NULL);
-+}
-+
-+
-+/*
-+ * USB Host port
-+ */
-+static struct at91_usbh_data __initdata ek_usbh_data = {
-+ .ports = 2,
-+};
-+
-+/*
-+ * USB Device port
-+ */
-+static struct at91_udc_data __initdata ek_udc_data = {
-+ .vbus_pin = AT91_PIN_PC5,
-+ .pullup_pin = 0, /* pull-up driven by UDC */
-+};
-+
-+/*
-+ * MACB Ethernet device
-+ */
-+static struct at91_eth_data __initdata ek_macb_data = {
-+ .phy_irq_pin = AT91_PIN_PA31,
-+ .is_rmii = 1,
-+};
-+
-+/*
-+ * NAND flash
-+ */
-+static struct mtd_partition __initdata ek_nand_partition[] = {
-+ {
-+ .name = "Uboot & Kernel",
-+ .offset = 0x00000000,
-+ .size = 16 * 1024 * 1024,
-+ },
-+ {
-+ .name = "Root FS",
-+ .offset = 0x01000000,
-+ .size = 120 * 1024 * 1024,
-+ },
-+ {
-+ .name = "FS",
-+ .offset = 0x08800000,
-+ .size = 120 * 1024 * 1024,
-+ }
-+};
-+
-+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-+{
-+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
-+ return ek_nand_partition;
-+}
-+
-+static struct at91_nand_data __initdata ek_nand_data = {
-+ .ale = 21,
-+ .cle = 22,
-+// .det_pin = ... not connected
-+ .rdy_pin = AT91_PIN_PC13,
-+ .enable_pin = AT91_PIN_PC14,
-+ .partition_info = nand_partitions,
-+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
-+ .bus_width_16 = 1,
-+#else
-+ .bus_width_16 = 0,
-+#endif
-+};
-+
-+/*
-+ * GPIO Buttons
-+ */
-+
-+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-+static struct gpio_keys_button ek_buttons[] = {
-+ { /* USER PUSH BUTTON */
-+ .code = KEY_ENTER,
-+ .gpio = AT91_PIN_PB10,
-+ .active_low = 1,
-+ .desc = "user_pb",
-+ .wakeup = 1,
-+ }
-+};
-+
-+static struct gpio_keys_platform_data ek_button_data = {
-+ .buttons = ek_buttons,
-+ .nbuttons = ARRAY_SIZE(ek_buttons),
-+};
-+
-+static struct platform_device ek_button_device = {
-+ .name = "gpio-keys",
-+ .id = -1,
-+ .num_resources = 0,
-+ .dev = {
-+ .platform_data = &ek_button_data,
-+ }
-+};
-+
-+static void __init ek_add_device_buttons(void)
-+{
-+ at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */
-+ at91_set_deglitch(AT91_PIN_PB10, 1);
-+
-+ platform_device_register(&ek_button_device);
-+}
-+#else
-+static void __init ek_add_device_buttons(void) {}
-+#endif
-+
-+/*
-+ * LEDs
-+ */
-+static struct gpio_led ek_leds[] = {
-+ { /* user_led (green) */
-+ .name = "user_led",
-+ .gpio = AT91_PIN_PB21,
-+ .active_low = 0,
-+ .default_trigger = "heartbeat",
-+ }
-+};
-+
-+static void __init ek_board_init(void)
-+{
-+ /* Serial */
-+ at91_add_device_serial();
-+ /* USB Host */
-+ at91_add_device_usbh(&ek_usbh_data);
-+ /* USB Device */
-+ at91_add_device_udc(&ek_udc_data);
-+ /* NAND */
-+ at91_add_device_nand(&ek_nand_data);
-+ /* I2C */
-+ at91_add_device_i2c(NULL, 0);
-+ /* Ethernet */
-+ at91_add_device_eth(&ek_macb_data);
-+ /* Push Buttons */
-+ ek_add_device_buttons();
-+ /* LEDs */
-+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-+ /* shutdown controller, wakeup button (5 msec low) */
-+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
-+ | AT91_SHDW_RTTWKEN);
-+}
-+
-+MACHINE_START(USB_A9260, "CALAO USB_A9260")
-+ /* Maintainer: calao-systems */
-+ .phys_io = AT91_BASE_SYS,
-+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+ .boot_params = AT91_SDRAM_BASE + 0x100,
-+ .timer = &at91sam926x_timer,
-+ .map_io = ek_map_io,
-+ .init_irq = ek_init_irq,
-+ .init_machine = ek_board_init,
-+MACHINE_END
---- /dev/null
-+++ b/arch/arm/mach-at91/board-usb-a9263.c
-@@ -0,0 +1,230 @@
-+/*
-+ * linux/arch/arm/mach-at91/board-usb-a9263.c
-+ *
-+ * Copyright (C) 2005 SAN People
-+ * Copyright (C) 2007 Atmel Corporation.
-+ * Copyright (C) 2007 Calao-systems
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91_shdwc.h>
-+
-+#include "generic.h"
-+
-+
-+static void __init ek_map_io(void)
-+{
-+ /* Initialize processor: 12.00 MHz crystal */
-+ at91sam9263_initialize(12000000);
-+
-+ /* DGBU on ttyS0. (Rx & Tx only) */
-+ at91_register_uart(0, 0, 0);
-+
-+ /* set serial console to ttyS0 (ie, DBGU) */
-+ at91_set_serial_console(0);
-+}
-+
-+static void __init ek_init_irq(void)
-+{
-+ at91sam9263_init_interrupts(NULL);
-+}
-+
-+
-+/*
-+ * USB Host port
-+ */
-+static struct at91_usbh_data __initdata ek_usbh_data = {
-+ .ports = 2,
-+};
-+
-+/*
-+ * USB Device port
-+ */
-+static struct at91_udc_data __initdata ek_udc_data = {
-+ .vbus_pin = AT91_PIN_PB11,
-+ .pullup_pin = 0, /* pull-up driven by UDC */
-+};
-+
-+/*
-+ * SPI devices.
-+ */
-+static struct spi_board_info ek_spi_devices[] = {
-+#if !defined(CONFIG_MMC_AT91)
-+ { /* DataFlash chip */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 0,
-+ .max_speed_hz = 15 * 1000 * 1000,
-+ .bus_num = 0,
-+ }
-+#endif
-+};
-+
-+/*
-+ * MACB Ethernet device
-+ */
-+static struct at91_eth_data __initdata ek_macb_data = {
-+ .phy_irq_pin = AT91_PIN_PE31,
-+ .is_rmii = 1,
-+};
-+
-+/*
-+ * NAND flash
-+ */
-+static struct mtd_partition __initdata ek_nand_partition[] = {
-+ {
-+ .name = "Linux Kernel",
-+ .offset = 0x00000000,
-+ .size = 16 * 1024 * 1024,
-+ },
-+ {
-+ .name = "Root FS",
-+ .offset = 0x01000000,
-+ .size = 120 * 1024 * 1024,
-+ },
-+ {
-+ .name = "FS",
-+ .offset = 0x08800000,
-+ .size = 120 * 1024 * 1024,
-+ }
-+};
-+
-+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-+{
-+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
-+ return ek_nand_partition;
-+}
-+
-+static struct at91_nand_data __initdata ek_nand_data = {
-+ .ale = 21,
-+ .cle = 22,
-+// .det_pin = ... not connected
-+ .rdy_pin = AT91_PIN_PA22,
-+ .enable_pin = AT91_PIN_PD15,
-+ .partition_info = nand_partitions,
-+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
-+ .bus_width_16 = 1,
-+#else
-+ .bus_width_16 = 0,
-+#endif
-+};
-+
-+/*
-+ * GPIO Buttons
-+ */
-+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-+static struct gpio_keys_button ek_buttons[] = {
-+ { /* USER PUSH BUTTON */
-+ .code = KEY_ENTER,
-+ .gpio = AT91_PIN_PB10,
-+ .active_low = 1,
-+ .desc = "user_pb",
-+ .wakeup = 1,
-+ }
-+};
-+
-+static struct gpio_keys_platform_data ek_button_data = {
-+ .buttons = ek_buttons,
-+ .nbuttons = ARRAY_SIZE(ek_buttons),
-+};
-+
-+static struct platform_device ek_button_device = {
-+ .name = "gpio-keys",
-+ .id = -1,
-+ .num_resources = 0,
-+ .dev = {
-+ .platform_data = &ek_button_data,
-+ }
-+};
-+
-+static void __init ek_add_device_buttons(void)
-+{
-+ at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */
-+ at91_set_deglitch(AT91_PIN_PB10, 1);
-+
-+ platform_device_register(&ek_button_device);
-+}
-+#else
-+static void __init ek_add_device_buttons(void) {}
-+#endif
-+
-+/*
-+ * LEDs
-+ */
-+static struct gpio_led ek_leds[] = {
-+ { /* user_led (green) */
-+ .name = "user_led",
-+ .gpio = AT91_PIN_PB21,
-+ .active_low = 1,
-+ .default_trigger = "heartbeat",
-+ }
-+};
-+
-+
-+static void __init ek_board_init(void)
-+{
-+ /* Serial */
-+ at91_add_device_serial();
-+ /* USB Host */
-+ at91_add_device_usbh(&ek_usbh_data);
-+ /* USB Device */
-+ at91_add_device_udc(&ek_udc_data);
-+ /* SPI */
-+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-+ /* Ethernet */
-+ at91_add_device_eth(&ek_macb_data);
-+ /* NAND */
-+ at91_add_device_nand(&ek_nand_data);
-+ /* I2C */
-+ at91_add_device_i2c(NULL, 0);
-+ /* Push Buttons */
-+ ek_add_device_buttons();
-+ /* LEDs */
-+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-+ /* shutdown controller, wakeup button (5 msec low) */
-+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
-+ | AT91_SHDW_RTTWKEN);
-+}
-+
-+MACHINE_START(USB_A9263, "CALAO USB_A9263")
-+ /* Maintainer: calao-systems */
-+ .phys_io = AT91_BASE_SYS,
-+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+ .boot_params = AT91_SDRAM_BASE + 0x100,
-+ .timer = &at91sam926x_timer,
-+ .map_io = ek_map_io,
-+ .init_irq = ek_init_irq,
-+ .init_machine = ek_board_init,
-+MACHINE_END
---- a/arch/arm/mach-at91/clock.c
-+++ b/arch/arm/mach-at91/clock.c
-@@ -32,6 +32,7 @@
- #include <asm/arch/cpu.h>
-
- #include "clock.h"
-+#include "generic.h"
-
-
- /*
-@@ -113,12 +114,34 @@ static void pmc_sys_mode(struct clk *clk
- at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask);
- }
-
-+static void pmc_uckr_mode(struct clk *clk, int is_on)
-+{
-+ unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
-+
-+ if (is_on) {
-+ is_on = AT91_PMC_LOCKU;
-+ at91_sys_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask);
-+ } else
-+ at91_sys_write(AT91_CKGR_UCKR, uckr & ~(clk->pmc_mask));
-+
-+ do {
-+ cpu_relax();
-+ } while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKU) != is_on);
-+}
-+
- /* USB function clocks (PLLB must be 48 MHz) */
- static struct clk udpck = {
- .name = "udpck",
- .parent = &pllb,
- .mode = pmc_sys_mode,
- };
-+static struct clk utmi_clk = {
-+ .name = "utmi_clk",
-+ .parent = &main_clk,
-+ .pmc_mask = AT91_PMC_UPLLEN, /* in CKGR_UCKR */
-+ .mode = pmc_uckr_mode,
-+ .type = CLK_TYPE_PLL,
-+};
- static struct clk uhpck = {
- .name = "uhpck",
- .parent = &pllb,
-@@ -254,6 +277,23 @@ EXPORT_SYMBOL(clk_get_rate);
-
- /*------------------------------------------------------------------------*/
-
-+#ifdef CONFIG_PM
-+
-+int clk_must_disable(struct clk *clk)
-+{
-+ if (!at91_suspend_entering_slow_clock())
-+ return 0;
-+
-+ while (clk->parent)
-+ clk = clk->parent;
-+ return clk != &clk32k;
-+}
-+EXPORT_SYMBOL(clk_must_disable);
-+
-+#endif
-+
-+/*------------------------------------------------------------------------*/
-+
- #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
-
- /*
-@@ -362,7 +402,7 @@ static void __init init_programmable_clo
-
- static int at91_clk_show(struct seq_file *s, void *unused)
- {
-- u32 scsr, pcsr, sr;
-+ u32 scsr, pcsr, uckr = 0, sr;
- struct clk *clk;
-
- seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR));
-@@ -370,7 +410,10 @@ static int at91_clk_show(struct seq_file
- seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR));
- seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
- seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
-- seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
-+ if (!cpu_is_at91sam9rl())
-+ seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
-+ if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
-+ seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR));
- seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
- seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
-
-@@ -383,6 +426,8 @@ static int at91_clk_show(struct seq_file
- state = (scsr & clk->pmc_mask) ? "on" : "off";
- else if (clk->mode == pmc_periph_mode)
- state = (pcsr & clk->pmc_mask) ? "on" : "off";
-+ else if (clk->mode == pmc_uckr_mode)
-+ state = (uckr & clk->pmc_mask) ? "on" : "off";
- else if (clk->pmc_mask)
- state = (sr & clk->pmc_mask) ? "on" : "off";
- else if (clk == &clk32k || clk == &main_clk)
-@@ -583,6 +628,17 @@ int __init at91_clock_init(unsigned long
- uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
-
- /*
-+ * USB HS clock init
-+ */
-+ if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) {
-+ /*
-+ * multiplier is hard-wired to 40
-+ * (obtain the USB High Speed 480 MHz when input is 12 MHz)
-+ */
-+ utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
-+ }
-+
-+ /*
- * MCK and CPU derive from one of those primary clocks.
- * For now, assume this parentage won't change.
- */
-@@ -599,6 +655,9 @@ int __init at91_clock_init(unsigned long
- for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
- list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
-
-+ if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
-+ list_add_tail(&utmi_clk.node, &clocks);
-+
- /* MCK and CPU clock are "always on" */
- clk_enable(&mck);
-
---- a/arch/arm/mach-at91/generic.h
-+++ b/arch/arm/mach-at91/generic.h
-@@ -41,6 +41,7 @@ extern void __init at91_clock_associate(
- /* Power Management */
- extern void at91_irq_suspend(void);
- extern void at91_irq_resume(void);
-+extern int at91_suspend_entering_slow_clock(void);
-
- /* GPIO */
- #define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */
---- a/arch/arm/mach-at91/gpio.c
-+++ b/arch/arm/mach-at91/gpio.c
-@@ -490,7 +490,8 @@ postcore_initcall(at91_gpio_debugfs_init
-
- /*--------------------------------------------------------------------------*/
-
--/* This lock class tells lockdep that GPIO irqs are in a different
-+/*
-+ * This lock class tells lockdep that GPIO irqs are in a different
- * category than their parents, so it won't report false recursion.
- */
- static struct lock_class_key gpio_lock_class;
-@@ -557,6 +558,7 @@ void __init at91_gpio_init(struct at91_g
- data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS;
-
- /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
-+ /* AT91CAP9_ID_PIOABCD groups PIOA, PIOB, PIOC, PIOD */
- if (last && last->id == data->id)
- last->next = data;
- }
---- /dev/null
-+++ b/arch/arm/mach-at91/ics1523.c
-@@ -0,0 +1,208 @@
-+/*
-+ * arch/arm/mach-at91rm9200/ics1523.c
-+ *
-+ * Copyright (C) 2003 ATMEL Rousset
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+
-+#include <asm/arch/ics1523.h>
-+#include <asm/arch/at91_twi.h>
-+#include <asm/arch/gpio.h>
-+
-+/* TWI Errors */
-+#define AT91_TWI_ERROR (AT91_TWI_NACK | AT91_TWI_UNRE | AT91_TWI_OVRE)
-+
-+
-+static void __iomem *twi_base;
-+
-+#define at91_twi_read(reg) __raw_readl(twi_base + (reg))
-+#define at91_twi_write(reg, val) __raw_writel((val), twi_base + (reg))
-+
-+
-+/* -----------------------------------------------------------------------------
-+ * Initialization of TWI CLOCK
-+ * ----------------------------------------------------------------------------- */
-+
-+static void at91_ics1523_SetTwiClock(unsigned int mck_khz)
-+{
-+ int sclock;
-+
-+ /* Here, CKDIV = 1 and CHDIV = CLDIV ==> CLDIV = CHDIV = 1/4*((Fmclk/FTWI) -6) */
-+ sclock = (10*mck_khz / ICS_TRANSFER_RATE);
-+ if (sclock % 10 >= 5)
-+ sclock = (sclock /10) - 5;
-+ else
-+ sclock = (sclock /10)- 6;
-+ sclock = (sclock + (4 - sclock %4)) >> 2; /* div 4 */
-+
-+ at91_twi_write(AT91_TWI_CWGR, 0x00010000 | sclock | (sclock << 8));
-+}
-+
-+/* -----------------------------------------------------------------------------
-+ * Read a byte with TWI Interface from the Clock Generator ICS1523
-+ * ----------------------------------------------------------------------------- */
-+
-+static int at91_ics1523_ReadByte(unsigned char reg_address, unsigned char *data_in)
-+{
-+ int Status, nb_trial;
-+
-+ at91_twi_write(AT91_TWI_MMR, AT91_TWI_MREAD | AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
-+ at91_twi_write(AT91_TWI_IADR, reg_address);
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
-+
-+ /* Program temporizing period (300us) */
-+ udelay(300);
-+
-+ /* Wait TXcomplete ... */
-+ nb_trial = 0;
-+ Status = at91_twi_read(AT91_TWI_SR);
-+ while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
-+ nb_trial++;
-+ Status = at91_twi_read(AT91_TWI_SR);
-+ }
-+
-+ if (Status & AT91_TWI_TXCOMP) {
-+ *data_in = (unsigned char) at91_twi_read(AT91_TWI_RHR);
-+ return ICS1523_ACCESS_OK;
-+ }
-+ else
-+ return ICS1523_ACCESS_ERROR;
-+}
-+
-+/* -----------------------------------------------------------------------------
-+ * Write a byte with TWI Interface to the Clock Generator ICS1523
-+ * ----------------------------------------------------------------------------- */
-+
-+static int at91_ics1523_WriteByte(unsigned char reg_address, unsigned char data_out)
-+{
-+ int Status, nb_trial;
-+
-+ at91_twi_write(AT91_TWI_MMR, AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
-+ at91_twi_write(AT91_TWI_IADR, reg_address);
-+ at91_twi_write(AT91_TWI_THR, data_out);
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
-+
-+ /* Program temporizing period (300us) */
-+ udelay(300);
-+
-+ nb_trial = 0;
-+ Status = at91_twi_read(AT91_TWI_SR);
-+ while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
-+ nb_trial++;
-+ if (Status & AT91_TWI_ERROR) {
-+ /* If Underrun OR NACK - Start again */
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
-+
-+ /* Program temporizing period (300us) */
-+ udelay(300);
-+ }
-+ Status = at91_twi_read(AT91_TWI_SR);
-+ };
-+
-+ if (Status & AT91_TWI_TXCOMP)
-+ return ICS1523_ACCESS_OK;
-+ else
-+ return ICS1523_ACCESS_ERROR;
-+}
-+
-+/* -----------------------------------------------------------------------------
-+ * Initialization of the Clock Generator ICS1523
-+ * ----------------------------------------------------------------------------- */
-+
-+int at91_ics1523_init(void)
-+{
-+ int nb_trial;
-+ int ack = ICS1523_ACCESS_OK;
-+ unsigned int status = 0xffffffff;
-+ struct clk *twi_clk;
-+
-+ /* Map in TWI peripheral */
-+ twi_base = ioremap(AT91RM9200_BASE_TWI, SZ_16K);
-+ if (!twi_base)
-+ return -ENOMEM;
-+
-+ /* pins used for TWI interface */
-+ at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */
-+ at91_set_multi_drive(AT91_PIN_PA25, 1);
-+ at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */
-+ at91_set_multi_drive(AT91_PIN_PA26, 1);
-+
-+ /* Enable the TWI clock */
-+ twi_clk = clk_get(NULL, "twi_clk");
-+ if (IS_ERR(twi_clk))
-+ return ICS1523_ACCESS_ERROR;
-+ clk_enable(twi_clk);
-+
-+ /* Disable interrupts */
-+ at91_twi_write(AT91_TWI_IDR, -1);
-+
-+ /* Reset peripheral */
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST);
-+
-+ /* Set Master mode */
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN);
-+
-+ /* Set TWI Clock Waveform Generator Register */
-+ at91_ics1523_SetTwiClock(60000); /* MCK in KHz = 60000 KHz */
-+
-+ /* ICS1523 Initialisation */
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) 0);
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OE, (unsigned char) (ICS_OEF | ICS_OET2 | ICS_OETCK));
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OD, (unsigned char) (ICS_INSEL | 0x7F));
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0);
-+
-+ nb_trial = 0;
-+ do {
-+ nb_trial++;
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) (ICS_ENDLS | ICS_ENPLS | ICS_PDEN /*| ICS_FUNCSEL*/));
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_LCR, (unsigned char) (ICS_PSD | ICS_PFD));
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD0, (unsigned char) 0x39) ; /* 0x7A */
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD1, (unsigned char) 0x00);
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_PLLR));
-+
-+ /* Program 1ms temporizing period */
-+ mdelay(1);
-+
-+ at91_ics1523_ReadByte ((unsigned char) ICS_SR, (char *)&status);
-+ } while (!((unsigned int) status & (unsigned int) ICS_PLLLOCK) && (nb_trial < 10));
-+
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAC, (unsigned char) 0x03) ; /* 0x01 */
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_DPAR));
-+
-+ /* Program 1ms temporizing period */
-+ mdelay(1);
-+
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0x00);
-+
-+ /* Program 1ms temporizing period */
-+ mdelay(1);
-+
-+ /* All done - cleanup */
-+ iounmap(twi_base);
-+ clk_disable(twi_clk);
-+ clk_put(twi_clk);
-+
-+ return ack;
-+}
---- a/arch/arm/mach-at91/pm.c
-+++ b/arch/arm/mach-at91/pm.c
-@@ -26,12 +26,144 @@
- #include <asm/mach-types.h>
-
- #include <asm/arch/at91_pmc.h>
--#include <asm/arch/at91rm9200_mc.h>
- #include <asm/arch/gpio.h>
- #include <asm/arch/cpu.h>
-
- #include "generic.h"
-
-+#ifdef CONFIG_ARCH_AT91RM9200
-+#include <asm/arch/at91rm9200_mc.h>
-+
-+/*
-+ * The AT91RM9200 goes into self-refresh mode with this command, and will
-+ * terminate self-refresh automatically on the next SDRAM access.
-+ */
-+#define sdram_selfrefresh_enable() at91_sys_write(AT91_SDRAMC_SRR, 1)
-+#define sdram_selfrefresh_disable() do {} while (0)
-+
-+#elif defined(CONFIG_ARCH_AT91CAP9)
-+#include <asm/arch/at91cap9_ddrsdr.h>
-+
-+static u32 saved_lpr;
-+
-+static inline void sdram_selfrefresh_enable(void)
-+{
-+ u32 lpr;
-+
-+ saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
-+
-+ lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
-+ at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
-+}
-+
-+#define sdram_selfrefresh_disable() at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
-+
-+#else
-+#include <asm/arch/at91sam9_sdramc.h>
-+
-+#ifdef CONFIG_ARCH_AT91SAM9263
-+/*
-+ * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
-+ * handle those cases both here and in the Suspend-To-RAM support.
-+ */
-+#define AT91_SDRAMC AT91_SDRAMC0
-+#warning Assuming EB1 SDRAM controller is *NOT* used
-+#endif
-+
-+static u32 saved_lpr;
-+
-+static inline void sdram_selfrefresh_enable(void)
-+{
-+ u32 lpr;
-+
-+ saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
-+
-+ lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
-+ at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
-+}
-+
-+#define sdram_selfrefresh_disable() at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
-+
-+/*
-+ * FIXME: The AT91SAM9263 has a second EBI controller which may have
-+ * additional SDRAM. pm_slowclock.S will require a similar fix.
-+ */
-+
-+#endif
-+
-+
-+/*
-+ * Show the reason for the previous system reset.
-+ */
-+#if defined(AT91_SHDWC)
-+
-+#include <asm/arch/at91_rstc.h>
-+#include <asm/arch/at91_shdwc.h>
-+
-+static void __init show_reset_status(void)
-+{
-+ static char reset[] __initdata = "reset";
-+
-+ static char general[] __initdata = "general";
-+ static char wakeup[] __initdata = "wakeup";
-+ static char watchdog[] __initdata = "watchdog";
-+ static char software[] __initdata = "software";
-+ static char user[] __initdata = "user";
-+ static char unknown[] __initdata = "unknown";
-+
-+ static char signal[] __initdata = "signal";
-+ static char rtc[] __initdata = "rtc";
-+ static char rtt[] __initdata = "rtt";
-+ static char restore[] __initdata = "power-restored";
-+
-+ char *reason, *r2 = reset;
-+ u32 reset_type, wake_type;
-+
-+ reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP;
-+ wake_type = at91_sys_read(AT91_SHDW_SR);
-+
-+ switch (reset_type) {
-+ case AT91_RSTC_RSTTYP_GENERAL:
-+ reason = general;
-+ break;
-+ case AT91_RSTC_RSTTYP_WAKEUP:
-+ /* board-specific code enabled the wakeup sources */
-+ reason = wakeup;
-+
-+ /* "wakeup signal" */
-+ if (wake_type & AT91_SHDW_WAKEUP0)
-+ r2 = signal;
-+ else {
-+ r2 = reason;
-+ if (wake_type & AT91_SHDW_RTTWK) /* rtt wakeup */
-+ reason = rtt;
-+ else if (wake_type & AT91_SHDW_RTCWK) /* rtc wakeup */
-+ reason = rtc;
-+ else if (wake_type == 0) /* power-restored wakeup */
-+ reason = restore;
-+ else /* unknown wakeup */
-+ reason = unknown;
-+ }
-+ break;
-+ case AT91_RSTC_RSTTYP_WATCHDOG:
-+ reason = watchdog;
-+ break;
-+ case AT91_RSTC_RSTTYP_SOFTWARE:
-+ reason = software;
-+ break;
-+ case AT91_RSTC_RSTTYP_USER:
-+ reason = user;
-+ break;
-+ default:
-+ reason = unknown;
-+ break;
-+ }
-+ pr_info("AT91: Starting after %s %s\n", reason, r2);
-+}
-+#else
-+static void __init show_reset_status(void) {}
-+#endif
-+
-
- static int at91_pm_valid_state(suspend_state_t state)
- {
-@@ -62,6 +194,7 @@ static int at91_pm_begin(suspend_state_t
- * Verify that all the clocks are correct before entering
- * slow-clock mode.
- */
-+#warning "This should probably be moved to clocks.c"
- static int at91_pm_verify_clocks(void)
- {
- unsigned long scsr;
-@@ -107,24 +240,24 @@ static int at91_pm_verify_clocks(void)
- }
-
- /*
-- * Call this from platform driver suspend() to see how deeply to suspend.
-+ * This is called from clk_must_disable(), to see how deeply to suspend.
- * For example, some controllers (like OHCI) need one of the PLL clocks
- * in order to act as a wakeup source, and those are not available when
- * going into slow clock mode.
-- *
-- * REVISIT: generalize as clk_will_be_available(clk)? Other platforms have
-- * the very same problem (but not using at91 main_clk), and it'd be better
-- * to add one generic API rather than lots of platform-specific ones.
- */
- int at91_suspend_entering_slow_clock(void)
- {
- return (target_state == PM_SUSPEND_MEM);
- }
--EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
-
-
- static void (*slow_clock)(void);
-
-+#ifdef CONFIG_AT91_SLOW_CLOCK
-+extern void at91_slow_clock(void);
-+extern u32 at91_slow_clock_sz;
-+#endif
-+
-
- static int at91_pm_enter(suspend_state_t state)
- {
-@@ -158,11 +291,14 @@ static int at91_pm_enter(suspend_state_t
- * turning off the main oscillator; reverse on wakeup.
- */
- if (slow_clock) {
-+#ifdef CONFIG_AT91_SLOW_CLOCK
-+ /* copy slow_clock handler to SRAM, and call it */
-+ memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
-+#endif
- slow_clock();
- break;
- } else {
-- /* DEVELOPMENT ONLY */
-- pr_info("AT91: PM - no slow clock mode yet ...\n");
-+ pr_info("AT91: PM - no slow clock mode enabled ...\n");
- /* FALLTHROUGH leaving master clock alone */
- }
-
-@@ -175,13 +311,15 @@ static int at91_pm_enter(suspend_state_t
- case PM_SUSPEND_STANDBY:
- /*
- * NOTE: the Wait-for-Interrupt instruction needs to be
-- * in icache so the SDRAM stays in self-refresh mode until
-- * the wakeup IRQ occurs.
-+ * in icache so no SDRAM accesses are needed until the
-+ * wakeup IRQ occurs and self-refresh is terminated.
- */
- asm("b 1f; .align 5; 1:");
- asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */
-- at91_sys_write(AT91_SDRAMC_SRR, 1); /* self-refresh mode */
-- /* fall though to next state */
-+ sdram_selfrefresh_enable();
-+ asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */
-+ sdram_selfrefresh_disable();
-+ break;
-
- case PM_SUSPEND_ON:
- asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */
-@@ -196,6 +334,7 @@ static int at91_pm_enter(suspend_state_t
- at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
-
- error:
-+ sdram_selfrefresh_disable();
- target_state = PM_SUSPEND_ON;
- at91_irq_resume();
- at91_gpio_resume();
-@@ -220,21 +359,20 @@ static struct platform_suspend_ops at91_
-
- static int __init at91_pm_init(void)
- {
-- printk("AT91: Power Management\n");
--
--#ifdef CONFIG_AT91_PM_SLOW_CLOCK
-- /* REVISIT allocations of SRAM should be dynamically managed.
-- * FIQ handlers and other components will want SRAM/TCM too...
-- */
-- slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K));
-- memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz);
-+#ifdef CONFIG_AT91_SLOW_CLOCK
-+ slow_clock = (void *) (AT91_IO_VIRT_BASE - at91_slow_clock_sz);
- #endif
-
-- /* Disable SDRAM low-power mode. Cannot be used with self-refresh. */
-+ pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : ""));
-+
-+#ifdef CONFIG_ARCH_AT91RM9200
-+ /* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
- at91_sys_write(AT91_SDRAMC_LPR, 0);
-+#endif
-
- suspend_set_ops(&at91_pm_ops);
-
-+ show_reset_status();
- return 0;
- }
- arch_initcall(at91_pm_init);
---- /dev/null
-+++ b/arch/arm/mach-at91/pm_slowclock.S
-@@ -0,0 +1,283 @@
-+/*
-+ * arch/arm/mach-at91/pm_slow_clock.S
-+ *
-+ * Copyright (C) 2006 Savin Zlobec
-+ *
-+ * AT91SAM9 support:
-+ * Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/linkage.h>
-+#include <asm/hardware.h>
-+#include <asm/arch/at91_pmc.h>
-+
-+#ifdef CONFIG_ARCH_AT91RM9200
-+#include <asm/arch/at91rm9200_mc.h>
-+#elif defined(CONFIG_ARCH_AT91CAP9)
-+#include <asm/arch/at91cap9_ddrsdr.h>
-+#else
-+#include <asm/arch/at91sam9_sdramc.h>
-+#endif
-+
-+
-+#ifdef CONFIG_ARCH_AT91SAM9263
-+/*
-+ * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
-+ * handle those cases both here and in the Suspend-To-RAM support.
-+ */
-+#define AT91_SDRAMC AT91_SDRAMC0
-+#warning Assuming EB1 SDRAM controller is *NOT* used
-+#endif
-+
-+/*
-+ * When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master
-+ * clock during suspend by adjusting its prescalar and divisor.
-+ * NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there
-+ * are errata regarding adjusting the prescalar and divisor.
-+ */
-+#undef SLOWDOWN_MASTER_CLOCK
-+
-+#define MCKRDY_TIMEOUT 1000
-+#define MOSCRDY_TIMEOUT 1000
-+#define PLLALOCK_TIMEOUT 1000
-+#define PLLBLOCK_TIMEOUT 1000
-+
-+
-+/*
-+ * Wait until master clock is ready (after switching master clock source)
-+ */
-+ .macro wait_mckrdy
-+ mov r4, #MCKRDY_TIMEOUT
-+1: sub r4, r4, #1
-+ cmp r4, #0
-+ beq 2f
-+ ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
-+ tst r3, #AT91_PMC_MCKRDY
-+ beq 1b
-+2:
-+ .endm
-+
-+/*
-+ * Wait until master oscillator has stabilized.
-+ */
-+ .macro wait_moscrdy
-+ mov r4, #MOSCRDY_TIMEOUT
-+1: sub r4, r4, #1
-+ cmp r4, #0
-+ beq 2f
-+ ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
-+ tst r3, #AT91_PMC_MOSCS
-+ beq 1b
-+2:
-+ .endm
-+
-+/*
-+ * Wait until PLLA has locked.
-+ */
-+ .macro wait_pllalock
-+ mov r4, #PLLALOCK_TIMEOUT
-+1: sub r4, r4, #1
-+ cmp r4, #0
-+ beq 2f
-+ ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
-+ tst r3, #AT91_PMC_LOCKA
-+ beq 1b
-+2:
-+ .endm
-+
-+/*
-+ * Wait until PLLB has locked.
-+ */
-+ .macro wait_pllblock
-+ mov r4, #PLLBLOCK_TIMEOUT
-+1: sub r4, r4, #1
-+ cmp r4, #0
-+ beq 2f
-+ ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
-+ tst r3, #AT91_PMC_LOCKB
-+ beq 1b
-+2:
-+ .endm
-+
-+ .text
-+
-+ENTRY(at91_slow_clock)
-+ /* Save registers on stack */
-+ stmfd sp!, {r0 - r12, lr}
-+
-+ /*
-+ * Register usage:
-+ * R1 = Base address of AT91_PMC
-+ * R2 = Base address of AT91_SDRAMC (or AT91_SYS on AT91RM9200)
-+ * R3 = temporary register
-+ * R4 = temporary register
-+ */
-+ ldr r1, .at91_va_base_pmc
-+ ldr r2, .at91_va_base_sdramc
-+
-+ /* Drain write buffer */
-+ mcr p15, 0, r0, c7, c10, 4
-+
-+#ifdef CONFIG_ARCH_AT91RM9200
-+ /* Put SDRAM in self-refresh mode */
-+ mov r3, #1
-+ str r3, [r2, #AT91_SDRAMC_SRR]
-+#elif defined(CONFIG_ARCH_AT91CAP9)
-+ /* Enable SDRAM self-refresh mode */
-+ ldr r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
-+ str r3, .saved_sam9_lpr
-+
-+ mov r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
-+ str r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
-+#else
-+ /* Enable SDRAM self-refresh mode */
-+ ldr r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
-+ str r3, .saved_sam9_lpr
-+
-+ mov r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
-+ str r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
-+#endif
-+
-+ /* Save Master clock setting */
-+ ldr r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
-+ str r3, .saved_mckr
-+
-+ /*
-+ * Set the Master clock source to slow clock
-+ */
-+ bic r3, r3, #AT91_PMC_CSS
-+ str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
-+
-+ wait_mckrdy
-+
-+#ifdef SLOWDOWN_MASTER_CLOCK
-+ /*
-+ * Set the Master Clock PRES and MDIV fields.
-+ *
-+ * See AT91RM9200 errata #27 and #28 for details.
-+ */
-+ mov r3, #0
-+ str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
-+
-+ wait_mckrdy
-+#endif
-+
-+ /* Save PLLA setting and disable it */
-+ ldr r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
-+ str r3, .saved_pllar
-+
-+ mov r3, #AT91_PMC_PLLCOUNT
-+ orr r3, r3, #(1 << 29) /* bit 29 always set */
-+ str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
-+
-+ wait_pllalock
-+
-+ /* Save PLLB setting and disable it */
-+ ldr r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
-+ str r3, .saved_pllbr
-+
-+ mov r3, #AT91_PMC_PLLCOUNT
-+ str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
-+
-+ wait_pllblock
-+
-+ /* Turn off the main oscillator */
-+ ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
-+ bic r3, r3, #AT91_PMC_MOSCEN
-+ str r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
-+
-+ /* Wait for interrupt */
-+ mcr p15, 0, r0, c7, c0, 4
-+
-+ /* Turn on the main oscillator */
-+ ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
-+ orr r3, r3, #AT91_PMC_MOSCEN
-+ str r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
-+
-+ wait_moscrdy
-+
-+ /* Restore PLLB setting */
-+ ldr r3, .saved_pllbr
-+ str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
-+
-+ wait_pllblock
-+
-+ /* Restore PLLA setting */
-+ ldr r3, .saved_pllar
-+ str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
-+
-+ wait_pllalock
-+
-+#ifdef SLOWDOWN_MASTER_CLOCK
-+ /*
-+ * First set PRES if it was not 0,
-+ * than set CSS and MDIV fields.
-+ *
-+ * See AT91RM9200 errata #27 and #28 for details.
-+ */
-+ ldr r3, .saved_mckr
-+ tst r3, #AT91_PMC_PRES
-+ beq 2f
-+ and r3, r3, #AT91_PMC_PRES
-+ str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
-+
-+ wait_mckrdy
-+#endif
-+
-+ /*
-+ * Restore master clock setting
-+ */
-+2: ldr r3, .saved_mckr
-+ str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
-+
-+ wait_mckrdy
-+
-+#ifdef CONFIG_ARCH_AT91RM9200
-+ /* Do nothing - self-refresh is automatically disabled. */
-+#elif defined(CONFIG_ARCH_AT91CAP9)
-+ /* Restore LPR on AT91CAP9 */
-+ ldr r3, .saved_sam9_lpr
-+ str r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
-+#else
-+ /* Restore LPR on AT91SAM9 */
-+ ldr r3, .saved_sam9_lpr
-+ str r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
-+#endif
-+
-+ /* Restore registers, and return */
-+ ldmfd sp!, {r0 - r12, pc}
-+
-+
-+.saved_mckr:
-+ .word 0
-+
-+.saved_pllar:
-+ .word 0
-+
-+.saved_pllbr:
-+ .word 0
-+
-+.saved_sam9_lpr:
-+ .word 0
-+
-+.at91_va_base_pmc:
-+ .word AT91_VA_BASE_SYS + AT91_PMC
-+
-+#ifdef CONFIG_ARCH_AT91RM9200
-+.at91_va_base_sdramc:
-+ .word AT91_VA_BASE_SYS
-+#elif defined(CONFIG_ARCH_AT91CAP9)
-+.at91_va_base_sdramc:
-+ .word AT91_VA_BASE_SYS + AT91_DDRSDRC
-+#else
-+.at91_va_base_sdramc:
-+ .word AT91_VA_BASE_SYS + AT91_SDRAMC
-+#endif
-+
-+ENTRY(at91_slow_clock_sz)
-+ .word .-at91_slow_clock
---- a/arch/arm/mach-ks8695/Makefile
-+++ b/arch/arm/mach-ks8695/Makefile
-@@ -11,5 +11,8 @@ obj- :=
- # PCI support is optional
- obj-$(CONFIG_PCI) += pci.o
-
-+# LEDs
-+obj-$(CONFIG_LEDS) += leds.o
-+
- # Board-specific support
- obj-$(CONFIG_MACH_KS8695) += board-micrel.o
---- a/arch/arm/mach-ks8695/devices.c
-+++ b/arch/arm/mach-ks8695/devices.c
-@@ -176,6 +176,27 @@ static void __init ks8695_add_device_wat
- #endif
-
-
-+/* --------------------------------------------------------------------
-+ * LEDs
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_LEDS)
-+short ks8695_leds_cpu = -1;
-+short ks8695_leds_timer = -1;
-+
-+void __init ks8695_init_leds(u8 cpu_led, u8 timer_led)
-+{
-+ /* Enable GPIO to access the LEDs */
-+ gpio_direction_output(cpu_led, 1);
-+ gpio_direction_output(timer_led, 1);
-+
-+ ks8695_leds_cpu = cpu_led;
-+ ks8695_leds_timer = timer_led;
-+}
-+#else
-+void __init ks8695_init_leds(u8 cpu_led, u8 timer_led) {}
-+#endif
-+
- /* -------------------------------------------------------------------- */
-
- /*
---- a/arch/arm/mach-ks8695/gpio.c
-+++ b/arch/arm/mach-ks8695/gpio.c
-@@ -136,9 +136,9 @@ int __init_or_module gpio_direction_outp
- /* set line state */
- x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
- if (state)
-- x |= (1 << pin);
-+ x |= IOPD_(pin);
- else
-- x &= ~(1 << pin);
-+ x &= ~IOPD_(pin);
- __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
-
- /* set pin as output */
-@@ -168,9 +168,9 @@ void gpio_set_value(unsigned int pin, un
- /* set output line state */
- x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
- if (state)
-- x |= (1 << pin);
-+ x |= IOPD_(pin);
- else
-- x &= ~(1 << pin);
-+ x &= ~IOPD_(pin);
- __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
-
- local_irq_restore(flags);
-@@ -189,7 +189,7 @@ int gpio_get_value(unsigned int pin)
- return -EINVAL;
-
- x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
-- return (x & (1 << pin)) != 0;
-+ return (x & IOPD_(pin)) != 0;
- }
- EXPORT_SYMBOL(gpio_get_value);
-
---- /dev/null
-+++ b/arch/arm/mach-ks8695/leds.c
-@@ -0,0 +1,94 @@
-+/*
-+ * LED driver for KS8695-based boards.
-+ *
-+ * Copyright (C) Andrew Victor
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/leds.h>
-+#include <asm/arch/devices.h>
-+#include <asm/arch/gpio.h>
-+
-+
-+static inline void ks8695_led_on(unsigned int led)
-+{
-+ gpio_set_value(led, 0);
-+}
-+
-+static inline void ks8695_led_off(unsigned int led)
-+{
-+ gpio_set_value(led, 1);
-+}
-+
-+static inline void ks8695_led_toggle(unsigned int led)
-+{
-+ unsigned long is_off = gpio_get_value(led);
-+ if (is_off)
-+ ks8695_led_on(led);
-+ else
-+ ks8695_led_off(led);
-+}
-+
-+
-+/*
-+ * Handle LED events.
-+ */
-+static void ks8695_leds_event(led_event_t evt)
-+{
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+
-+ switch(evt) {
-+ case led_start: /* System startup */
-+ ks8695_led_on(ks8695_leds_cpu);
-+ break;
-+
-+ case led_stop: /* System stop / suspend */
-+ ks8695_led_off(ks8695_leds_cpu);
-+ break;
-+
-+#ifdef CONFIG_LEDS_TIMER
-+ case led_timer: /* Every 50 timer ticks */
-+ ks8695_led_toggle(ks8695_leds_timer);
-+ break;
-+#endif
-+
-+#ifdef CONFIG_LEDS_CPU
-+ case led_idle_start: /* Entering idle state */
-+ ks8695_led_off(ks8695_leds_cpu);
-+ break;
-+
-+ case led_idle_end: /* Exit idle state */
-+ ks8695_led_on(ks8695_leds_cpu);
-+ break;
-+#endif
-+
-+ default:
-+ break;
-+ }
-+
-+ local_irq_restore(flags);
-+}
-+
-+
-+static int __init leds_init(void)
-+{
-+ if ((ks8695_leds_timer == -1) || (ks8695_leds_cpu == -1))
-+ return -ENODEV;
-+
-+ leds_event = ks8695_leds_event;
-+
-+ leds_event(led_start);
-+ return 0;
-+}
-+
-+__initcall(leds_init);
---- a/arch/arm/mach-ks8695/pci.c
-+++ b/arch/arm/mach-ks8695/pci.c
-@@ -141,7 +141,7 @@ static struct pci_ops ks8695_pci_ops = {
- .write = ks8695_pci_writeconfig,
- };
-
--static struct pci_bus *ks8695_pci_scan_bus(int nr, struct pci_sys_data *sys)
-+static struct pci_bus* __init ks8695_pci_scan_bus(int nr, struct pci_sys_data *sys)
- {
- return pci_scan_bus(sys->busnr, &ks8695_pci_ops, sys);
- }
---- a/drivers/char/Kconfig
-+++ b/drivers/char/Kconfig
-@@ -1056,5 +1056,21 @@ config DEVPORT
-
- source "drivers/s390/char/Kconfig"
-
-+config AT91_SPI
-+ bool "SPI driver (legacy) for AT91RM9200 processors"
-+ depends on ARCH_AT91RM9200
-+ default y
-+ help
-+ The SPI driver gives access to this serial bus on the AT91RM9200
-+ processor.
-+
-+config AT91_SPIDEV
-+ bool "SPI device interface (legacy) for AT91RM9200 processors"
-+ depends on ARCH_AT91RM9200 && AT91_SPI
-+ default n
-+ help
-+ The SPI driver gives user mode access to this serial
-+ bus on the AT91RM9200 processor.
-+
- endmenu
-
---- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -98,6 +98,8 @@ obj-$(CONFIG_GPIO_DEVICE) += gpio_dev.o
- obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
- obj-$(CONFIG_GPIO_TB0219) += tb0219.o
- obj-$(CONFIG_TELCLOCK) += tlclk.o
-+obj-$(CONFIG_AT91_SPI) += at91_spi.o
-+obj-$(CONFIG_AT91_SPIDEV) += at91_spidev.o
-
- obj-$(CONFIG_MWAVE) += mwave/
- obj-$(CONFIG_AGP) += agp/
---- /dev/null
-+++ b/drivers/char/at91_spi.c
-@@ -0,0 +1,337 @@
-+/*
-+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 (Thunder)
-+ *
-+ * Copyright (C) SAN People (Pty) Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/module.h>
-+#include <linux/sched.h>
-+#include <linux/completion.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <linux/platform_device.h>
-+#include <linux/atmel_pdc.h>
-+#include <asm/io.h>
-+#include <asm/semaphore.h>
-+
-+#include <asm/arch/at91_spi.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/spi.h>
-+
-+#undef DEBUG_SPI
-+
-+static struct spi_local spi_dev[NR_SPI_DEVICES]; /* state of the SPI devices */
-+static int spi_enabled = 0;
-+static struct semaphore spi_lock; /* protect access to SPI bus */
-+static int current_device = -1; /* currently selected SPI device */
-+static struct clk *spi_clk; /* SPI clock */
-+static void __iomem *spi_base; /* SPI peripheral base-address */
-+
-+DECLARE_COMPLETION(transfer_complete);
-+
-+
-+#define at91_spi_read(reg) __raw_readl(spi_base + (reg))
-+#define at91_spi_write(reg, val) __raw_writel((val), spi_base + (reg))
-+
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Access and enable the SPI bus.
-+ * This MUST be called before any transfers are performed.
-+ */
-+void spi_access_bus(short device)
-+{
-+ /* Ensure that requested device is valid */
-+ if ((device < 0) || (device >= NR_SPI_DEVICES))
-+ panic("at91_spi: spi_access_bus called with invalid device");
-+
-+ if (spi_enabled == 0) {
-+ clk_enable(spi_clk); /* Enable Peripheral clock */
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN); /* Enable SPI */
-+#ifdef DEBUG_SPI
-+ printk("SPI on\n");
-+#endif
-+ }
-+ spi_enabled++;
-+
-+ /* Lock the SPI bus */
-+ down(&spi_lock);
-+ current_device = device;
-+
-+ /* Configure SPI bus for device */
-+ at91_spi_write(AT91_SPI_MR, AT91_SPI_MSTR | AT91_SPI_MODFDIS | (spi_dev[device].pcs << 16));
-+}
-+
-+/*
-+ * Relinquish control of the SPI bus.
-+ */
-+void spi_release_bus(short device)
-+{
-+ if (device != current_device)
-+ panic("at91_spi: spi_release called with invalid device");
-+
-+ /* Release the SPI bus */
-+ current_device = -1;
-+ up(&spi_lock);
-+
-+ spi_enabled--;
-+ if (spi_enabled == 0) {
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS); /* Disable SPI */
-+ clk_disable(spi_clk); /* Disable Peripheral clock */
-+#ifdef DEBUG_SPI
-+ printk("SPI off\n");
-+#endif
-+ }
-+}
-+
-+/*
-+ * Perform a data transfer over the SPI bus
-+ */
-+int spi_transfer(struct spi_transfer_list* list)
-+{
-+ struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
-+ int tx_size;
-+
-+ if (!list)
-+ panic("at91_spi: spi_transfer called with NULL transfer list");
-+ if (current_device == -1)
-+ panic("at91_spi: spi_transfer called without acquiring bus");
-+
-+#ifdef DEBUG_SPI
-+ printk("SPI transfer start [%i]\n", list->nr_transfers);
-+#endif
-+
-+ /* If we are in 16-bit mode, we need to modify what we pass to the PDC */
-+ tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
-+
-+ /* Store transfer list */
-+ device->xfers = list;
-+ list->curr = 0;
-+
-+ /* Assume there must be at least one transfer */
-+ device->tx = dma_map_single(NULL, list->tx[0], list->txlen[0], DMA_TO_DEVICE);
-+ device->rx = dma_map_single(NULL, list->rx[0], list->rxlen[0], DMA_FROM_DEVICE);
-+
-+ /* Program PDC registers */
-+ at91_spi_write(ATMEL_PDC_TPR, device->tx);
-+ at91_spi_write(ATMEL_PDC_RPR, device->rx);
-+ at91_spi_write(ATMEL_PDC_TCR, list->txlen[0] / tx_size);
-+ at91_spi_write(ATMEL_PDC_RCR, list->rxlen[0] / tx_size);
-+
-+ /* Is there a second transfer? */
-+ if (list->nr_transfers > 1) {
-+ device->txnext = dma_map_single(NULL, list->tx[1], list->txlen[1], DMA_TO_DEVICE);
-+ device->rxnext = dma_map_single(NULL, list->rx[1], list->rxlen[1], DMA_FROM_DEVICE);
-+
-+ /* Program Next PDC registers */
-+ at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
-+ at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
-+ at91_spi_write(ATMEL_PDC_TNCR, list->txlen[1] / tx_size);
-+ at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[1] / tx_size);
-+ }
-+ else {
-+ device->txnext = 0;
-+ device->rxnext = 0;
-+ at91_spi_write(ATMEL_PDC_TNCR, 0);
-+ at91_spi_write(ATMEL_PDC_RNCR, 0);
-+ }
-+
-+ // TODO: If we are doing consecutive transfers (at high speed, or
-+ // small buffers), then it might be worth modifying the 'Delay between
-+ // Consecutive Transfers' in the CSR registers.
-+ // This is an issue if we cannot chain the next buffer fast enough
-+ // in the interrupt handler.
-+
-+ /* Enable transmitter and receiver */
-+ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN | ATMEL_PDC_TXTEN);
-+
-+ at91_spi_write(AT91_SPI_IER, AT91_SPI_ENDRX); /* enable buffer complete interrupt */
-+ wait_for_completion(&transfer_complete);
-+
-+#ifdef DEBUG_SPI
-+ printk("SPI transfer end\n");
-+#endif
-+
-+ return 0;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Handle interrupts from the SPI controller.
-+ */
-+static irqreturn_t at91spi_interrupt(int irq, void *dev_id)
-+{
-+ unsigned int status;
-+ struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
-+ struct spi_transfer_list *list = device->xfers;
-+
-+#ifdef DEBUG_SPI
-+ printk("SPI interrupt %i\n", current_device);
-+#endif
-+
-+ if (!list)
-+ panic("at91_spi: spi_interrupt with a NULL transfer list");
-+
-+ status = at91_spi_read(AT91_SPI_SR) & at91_spi_read(AT91_SPI_IMR); /* read status */
-+
-+ dma_unmap_single(NULL, device->tx, list->txlen[list->curr], DMA_TO_DEVICE);
-+ dma_unmap_single(NULL, device->rx, list->rxlen[list->curr], DMA_FROM_DEVICE);
-+
-+ device->tx = device->txnext; /* move next transfer to current transfer */
-+ device->rx = device->rxnext;
-+
-+ list->curr = list->curr + 1;
-+ if (list->curr == list->nr_transfers) { /* all transfers complete */
-+ at91_spi_write(AT91_SPI_IDR, AT91_SPI_ENDRX); /* disable interrupt */
-+
-+ /* Disable transmitter and receiver */
-+ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-+
-+ device->xfers = NULL;
-+ complete(&transfer_complete);
-+ }
-+ else if (list->curr+1 == list->nr_transfers) { /* no more next transfers */
-+ device->txnext = 0;
-+ device->rxnext = 0;
-+ at91_spi_write(ATMEL_PDC_TNCR, 0);
-+ at91_spi_write(ATMEL_PDC_RNCR, 0);
-+ }
-+ else {
-+ int i = (list->curr)+1;
-+
-+ /* If we are in 16-bit mode, we need to modify what we pass to the PDC */
-+ int tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
-+
-+ device->txnext = dma_map_single(NULL, list->tx[i], list->txlen[i], DMA_TO_DEVICE);
-+ device->rxnext = dma_map_single(NULL, list->rx[i], list->rxlen[i], DMA_FROM_DEVICE);
-+ at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
-+ at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
-+ at91_spi_write(ATMEL_PDC_TNCR, list->txlen[i] / tx_size);
-+ at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[i] / tx_size);
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Initialize the SPI controller
-+ */
-+static int __init at91spi_probe(struct platform_device *pdev)
-+{
-+ int i;
-+ unsigned long scbr;
-+ struct resource *res;
-+
-+ init_MUTEX(&spi_lock);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res)
-+ return -ENXIO;
-+
-+ if (!request_mem_region(res->start, res->end - res->start + 1, "at91_spi"))
-+ return -EBUSY;
-+
-+ spi_base = ioremap(res->start, res->end - res->start + 1);
-+ if (!spi_base) {
-+ release_mem_region(res->start, res->end - res->start + 1);
-+ return -ENOMEM;
-+ }
-+
-+ spi_clk = clk_get(NULL, "spi_clk");
-+ if (IS_ERR(spi_clk)) {
-+ printk(KERN_ERR "at91_spi: no clock defined\n");
-+ iounmap(spi_base);
-+ release_mem_region(res->start, res->end - res->start + 1);
-+ return -ENODEV;
-+ }
-+
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SWRST); /* software reset of SPI controller */
-+
-+ /*
-+ * Calculate the correct SPI baud-rate divisor.
-+ */
-+ scbr = clk_get_rate(spi_clk) / (2 * DEFAULT_SPI_CLK);
-+ scbr = scbr + 1; /* round up */
-+
-+ printk(KERN_INFO "at91_spi: Baud rate set to %ld\n", clk_get_rate(spi_clk) / (2 * scbr));
-+
-+ /* Set Chip Select registers to good defaults */
-+ for (i = 0; i < 4; i++) {
-+ at91_spi_write(AT91_SPI_CSR(i), AT91_SPI_CPOL | AT91_SPI_BITS_8 | (16 << 16) | (scbr << 8));
-+ }
-+
-+ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-+
-+ memset(&spi_dev, 0, sizeof(spi_dev));
-+ spi_dev[0].pcs = 0xE;
-+ spi_dev[1].pcs = 0xD;
-+ spi_dev[2].pcs = 0xB;
-+ spi_dev[3].pcs = 0x7;
-+
-+ if (request_irq(AT91RM9200_ID_SPI, at91spi_interrupt, 0, "spi", NULL)) {
-+ clk_put(spi_clk);
-+ iounmap(spi_base);
-+ release_mem_region(res->start, res->end - res->start + 1);
-+ return -EBUSY;
-+ }
-+
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN); /* Enable SPI */
-+
-+ return 0;
-+}
-+
-+static int __devexit at91spi_remove(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS); /* Disable SPI */
-+ clk_put(spi_clk);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ iounmap(spi_base);
-+ release_mem_region(res->start, res->end - res->start + 1);
-+
-+ free_irq(AT91RM9200_ID_SPI, 0);
-+ return 0;
-+}
-+
-+static struct platform_driver at91spi_driver = {
-+ .probe = at91spi_probe,
-+ .remove = __devexit_p(at91spi_remove),
-+ .driver = {
-+ .name = "at91_spi",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init at91spi_init(void)
-+{
-+ return platform_driver_register(&at91spi_driver);
-+}
-+
-+static void __exit at91spi_exit(void)
-+{
-+ platform_driver_unregister(&at91spi_driver);
-+}
-+
-+EXPORT_SYMBOL(spi_access_bus);
-+EXPORT_SYMBOL(spi_release_bus);
-+EXPORT_SYMBOL(spi_transfer);
-+
-+module_init(at91spi_init);
-+module_exit(at91spi_exit);
-+
-+MODULE_LICENSE("GPL")
-+MODULE_AUTHOR("Andrew Victor")
-+MODULE_DESCRIPTION("SPI driver for Atmel AT91RM9200")
-+MODULE_ALIAS("platform:at91_spi");
---- /dev/null
-+++ b/drivers/char/at91_spidev.c
-@@ -0,0 +1,233 @@
-+/*
-+ * User-space interface to the SPI bus on Atmel AT91RM9200
-+ *
-+ * Copyright (C) 2003 SAN People (Pty) Ltd
-+ *
-+ * Based on SPI driver by Rick Bronson
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/highmem.h>
-+#include <linux/pagemap.h>
-+#include <asm/arch/spi.h>
-+
-+#ifdef CONFIG_DEVFS_FS
-+#include <linux/devfs_fs_kernel.h>
-+#endif
-+
-+
-+#undef DEBUG_SPIDEV
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Read or Write to SPI bus.
-+ */
-+static ssize_t spidev_rd_wr(struct file *file, char *buf, size_t count, loff_t *offset)
-+{
-+ unsigned int spi_device = (unsigned int) file->private_data;
-+
-+ struct mm_struct * mm;
-+ struct page ** maplist;
-+ struct spi_transfer_list* list;
-+ int pgcount;
-+
-+ unsigned int ofs, pagelen;
-+ int res, i, err;
-+
-+ if (!count) {
-+ return 0;
-+ }
-+
-+ list = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
-+ if (!list) {
-+ return -ENOMEM;
-+ }
-+
-+ mm = current->mm;
-+
-+ pgcount = ((unsigned long)buf+count+PAGE_SIZE-1)/PAGE_SIZE - (unsigned long)buf/PAGE_SIZE;
-+
-+ if (pgcount >= MAX_SPI_TRANSFERS) {
-+ kfree(list);
-+ return -EFBIG;
-+ }
-+
-+ maplist = kmalloc (pgcount * sizeof (struct page *), GFP_KERNEL);
-+
-+ if (!maplist) {
-+ kfree(list);
-+ return -ENOMEM;
-+ }
-+ flush_cache_all();
-+ down_read(&mm->mmap_sem);
-+ err= get_user_pages(current, mm, (unsigned long)buf, pgcount, 1, 0, maplist, NULL);
-+ up_read(&mm->mmap_sem);
-+
-+ if (err < 0) {
-+ kfree(list);
-+ kfree(maplist);
-+ return err;
-+ }
-+ pgcount = err;
-+
-+#ifdef DEBUG_SPIDEV
-+ printk("spidev_rd_rw: %i %i\n", count, pgcount);
-+#endif
-+
-+ /* Set default return value = transfer length */
-+ res = count;
-+
-+ /*
-+ * At this point, the virtual area buf[0] .. buf[count-1] will have
-+ * corresponding pages mapped in the physical memory and locked until
-+ * we unmap the kiobuf. The pages cannot be swapped out or moved
-+ * around.
-+ */
-+ ofs = (unsigned long) buf & (PAGE_SIZE -1);
-+ pagelen = PAGE_SIZE - ofs;
-+ if (count < pagelen)
-+ pagelen = count;
-+
-+ for (i = 0; i < pgcount; i++) {
-+ flush_dcache_page(maplist[i]);
-+
-+ list->tx[i] = list->rx[i] = page_address(maplist[i]) + ofs;
-+ list->txlen[i] = list->rxlen[i] = pagelen;
-+
-+#ifdef DEBUG_SPIDEV
-+ printk(" %i: %x (%i)\n", i, list->tx[i], list->txlen[i]);
-+#endif
-+
-+ ofs = 0; /* all subsequent transfers start at beginning of a page */
-+ count = count - pagelen;
-+ pagelen = (count < PAGE_SIZE) ? count : PAGE_SIZE;
-+ }
-+ list->nr_transfers = pgcount;
-+
-+ /* Perform transfer on SPI bus */
-+ spi_access_bus(spi_device);
-+ spi_transfer(list);
-+ spi_release_bus(spi_device);
-+
-+ while (pgcount--) {
-+ page_cache_release (maplist[pgcount]);
-+ }
-+ flush_cache_all();
-+
-+ kfree(maplist);
-+ kfree(list);
-+
-+ return res;
-+}
-+
-+static int spidev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+ int spi_device = MINOR(inode->i_rdev);
-+
-+ if (spi_device >= NR_SPI_DEVICES)
-+ return -ENODEV;
-+
-+ // TODO: This interface can be used to configure the SPI bus.
-+ // Configurable options could include: Speed, Clock Polarity, Clock Phase
-+
-+ switch(cmd) {
-+ default:
-+ return -ENOIOCTLCMD;
-+ }
-+}
-+
-+/*
-+ * Open the SPI device
-+ */
-+static int spidev_open(struct inode *inode, struct file *file)
-+{
-+ unsigned int spi_device = MINOR(inode->i_rdev);
-+
-+ if (spi_device >= NR_SPI_DEVICES)
-+ return -ENODEV;
-+
-+ /*
-+ * 'private_data' is actually a pointer, but we overload it with the
-+ * value we want to store.
-+ */
-+ file->private_data = (void *)spi_device;
-+
-+ return 0;
-+}
-+
-+/*
-+ * Close the SPI device
-+ */
-+static int spidev_close(struct inode *inode, struct file *file)
-+{
-+ return 0;
-+}
-+
-+/* ......................................................................... */
-+
-+static struct file_operations spidev_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .read = spidev_rd_wr,
-+ .write = (int (*) (struct file *file, const char *buf, size_t count, loff_t *offset))spidev_rd_wr,
-+ .ioctl = spidev_ioctl,
-+ .open = spidev_open,
-+ .release = spidev_close,
-+};
-+
-+/*
-+ * Install the SPI /dev interface driver
-+ */
-+static int __init at91_spidev_init(void)
-+{
-+#ifdef CONFIG_DEVFS_FS
-+ int i;
-+#endif
-+
-+ if (register_chrdev(SPI_MAJOR, "spi", &spidev_fops)) {
-+ printk(KERN_ERR "at91_spidev: Unable to get major %d for SPI bus\n", SPI_MAJOR);
-+ return -EIO;
-+ }
-+
-+#ifdef CONFIG_DEVFS_FS
-+ devfs_mk_dir("spi");
-+ for (i = 0; i < NR_SPI_DEVICES; i++) {
-+ devfs_mk_cdev(MKDEV(SPI_MAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR, "spi/%d",i);
-+ }
-+#endif
-+ printk(KERN_INFO "AT91 SPI driver loaded\n");
-+
-+ return 0;
-+}
-+
-+/*
-+ * Remove the SPI /dev interface driver
-+ */
-+static void __exit at91_spidev_exit(void)
-+{
-+#ifdef CONFIG_DEVFS_FS
-+ int i;
-+ for (i = 0; i < NR_SPI_DEVICES; i++) {
-+ devfs_remove("spi/%d", i);
-+ }
-+
-+ devfs_remove("spi");
-+#endif
-+
-+ unregister_chrdev(SPI_MAJOR, "spi");
-+}
-+
-+module_init(at91_spidev_init);
-+module_exit(at91_spidev_exit);
-+
-+MODULE_LICENSE("GPL")
-+MODULE_AUTHOR("Andrew Victor")
-+MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200")
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -88,6 +88,14 @@ config I2C_AT91
- to support combined I2C messages. Use the i2c-gpio driver
- unless your system can cope with those limitations.
-
-+config I2C_AT91_CLOCKRATE
-+ prompt "Atmel AT91 I2C/TWI clock-rate"
-+ depends on I2C_AT91
-+ int
-+ default 100000
-+ help
-+ Set the AT91 I2C/TWI clock-rate.
-+
- config I2C_AU1550
- tristate "Au1550/Au1200 SMBus interface"
- depends on SOC_AU1550 || SOC_AU1200
-@@ -626,6 +634,14 @@ config I2C_VOODOO3
- This driver can also be built as a module. If so, the module
- will be called i2c-voodoo3.
-
-+config I2C_PCA
-+ tristate "PCA9564"
-+ depends on I2C
-+ select I2C_ALGOPCA
-+ help
-+ This driver support the Philips PCA 9564 Parallel bus to I2C
-+ bus controller.
-+
- config I2C_PCA_ISA
- tristate "PCA9564 on an ISA bus"
- depends on ISA
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -29,6 +29,7 @@ obj-$(CONFIG_I2C_OMAP) += i2c-omap.o
- obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
- obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
- obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
-+obj-$(CONFIG_I2C_PCA) += i2c-pca.o
- obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
- obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
- obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o
---- a/drivers/i2c/busses/i2c-at91.c
-+++ b/drivers/i2c/busses/i2c-at91.c
-@@ -31,8 +31,11 @@
- #include <asm/arch/board.h>
- #include <asm/arch/cpu.h>
-
--#define TWI_CLOCK 100000 /* Hz. max 400 Kbits/sec */
-
-+/* Clockrate is configurable - max 400 Kbits/sec */
-+static unsigned int clockrate = CONFIG_I2C_AT91_CLOCKRATE;
-+module_param(clockrate, uint, 0);
-+MODULE_PARM_DESC(clockrate, "The TWI clockrate");
-
- static struct clk *twi_clk;
- static void __iomem *twi_base;
-@@ -53,7 +56,7 @@ static void __devinit at91_twi_hwinit(vo
- at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */
-
- /* Calcuate clock dividers */
-- cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3;
-+ cdiv = (clk_get_rate(twi_clk) / (2 * clockrate)) - 3;
- cdiv = cdiv + 1; /* round up */
- ckdiv = 0;
- while (cdiv > 255) {
-@@ -61,11 +64,12 @@ static void __devinit at91_twi_hwinit(vo
- cdiv = cdiv >> 1;
- }
-
-- if (cpu_is_at91rm9200()) { /* AT91RM9200 Errata #22 */
-- if (ckdiv > 5) {
-- printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n");
-- ckdiv = 5;
-- }
-+ if (cpu_is_at91rm9200() && (ckdiv > 5)) { /* AT91RM9200 Errata #22 */
-+ printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
-+ ckdiv = 5;
-+ } else if (ckdiv > 7) {
-+ printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
-+ ckdiv = 7;
- }
-
- at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv);
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-pca.c
-@@ -0,0 +1,213 @@
-+/*
-+ * Platform driver for PCA9564 I2C bus controller.
-+ *
-+ * (C) 2006 Andrew Victor
-+ *
-+ * Based on i2c-pca-isa.c driver for PCA9564 on ISA boards
-+ * Copyright (C) 2004 Arcom Control Systems
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/delay.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/wait.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/i2c.h>
-+#include <linux/i2c-algo-pca.h>
-+
-+#include <asm/io.h>
-+
-+#include "../algos/i2c-algo-pca.h"
-+
-+#define PCA_OWN_ADDRESS 0x55 /* our address for slave mode */
-+#define PCA_CLOCK I2C_PCA_CON_59kHz
-+
-+//#define REG_SHIFT 2
-+#define REG_SHIFT 0
-+
-+//#define DEBUG_IO
-+
-+#define PCA_IO_SIZE 4
-+
-+static void __iomem *base_addr;
-+static int irq;
-+static wait_queue_head_t pca_wait;
-+
-+static int pca_getown(struct i2c_algo_pca_data *adap)
-+{
-+ return PCA_OWN_ADDRESS;
-+}
-+
-+static int pca_getclock(struct i2c_algo_pca_data *adap)
-+{
-+ return PCA_CLOCK;
-+}
-+
-+static void pca_writebyte(struct i2c_algo_pca_data *adap, int reg, int val)
-+{
-+#ifdef DEBUG_IO
-+ static char *names[] = { "T/O", "DAT", "ADR", "CON" };
-+ printk("*** write %s at %#lx <= %#04x\n", names[reg], (unsigned long) base_addr+reg, val);
-+#endif
-+ udelay(1);
-+ outb(val, base_addr + (reg << REG_SHIFT));
-+}
-+
-+static int pca_readbyte(struct i2c_algo_pca_data *adap, int reg)
-+{
-+ int res;
-+
-+ udelay(1);
-+ res = inb(base_addr + (reg << REG_SHIFT));
-+#ifdef DEBUG_IO
-+ {
-+ static char *names[] = { "STA", "DAT", "ADR", "CON" };
-+ printk("*** read %s => %#04x\n", names[reg], res);
-+ }
-+#endif
-+ return res;
-+}
-+
-+static int pca_waitforinterrupt(struct i2c_algo_pca_data *adap)
-+{
-+ int ret = 0;
-+
-+ if (irq > -1) {
-+ ret = wait_event_interruptible(pca_wait,
-+ pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI);
-+ } else {
-+ while ((pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0)
-+ udelay(100);
-+ }
-+ return ret;
-+}
-+
-+static irqreturn_t pca_handler(int this_irq, void *dev_id)
-+{
-+ wake_up_interruptible(&pca_wait);
-+ return IRQ_HANDLED;
-+}
-+
-+static struct i2c_algo_pca_data pca_i2c_data = {
-+ .get_own = pca_getown,
-+ .get_clock = pca_getclock,
-+ .write_byte = pca_writebyte,
-+ .read_byte = pca_readbyte,
-+ .wait_for_interrupt = pca_waitforinterrupt,
-+};
-+
-+static struct i2c_adapter pca_i2c_ops = {
-+ .owner = THIS_MODULE,
-+ .id = I2C_HW_A_PLAT,
-+ .algo_data = &pca_i2c_data,
-+ .name = "PCA9564",
-+ .class = I2C_CLASS_HWMON,
-+};
-+
-+static int __devinit pca_i2c_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+
-+ init_waitqueue_head(&pca_wait);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res)
-+ return -ENODEV;
-+
-+ if (!request_mem_region(res->start, PCA_IO_SIZE, "PCA9564"))
-+ return -ENXIO;
-+
-+ base_addr = ioremap(res->start, PCA_IO_SIZE);
-+ if (base_addr == NULL)
-+ goto out_region;
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq > -1) {
-+ if (request_irq(irq, pca_handler, 0, "pca9564", NULL) < 0) {
-+ printk(KERN_ERR "i2c-pca: Request irq%d failed\n", irq);
-+ goto out_remap;
-+ }
-+ }
-+
-+ /* set up the driverfs linkage to our parent device */
-+ pca_i2c_ops.dev.parent = &pdev->dev;
-+
-+ if (i2c_pca_add_bus(&pca_i2c_ops) < 0) {
-+ printk(KERN_ERR "i2c-pca: Failed to add i2c bus\n");
-+ goto out_irq;
-+ }
-+
-+ return 0;
-+
-+ out_irq:
-+ if (irq > -1)
-+ free_irq(irq, &pca_i2c_ops);
-+
-+ out_remap:
-+ iounmap(base_addr);
-+
-+ out_region:
-+ release_mem_region(res->start, PCA_IO_SIZE);
-+ return -ENODEV;
-+}
-+
-+static int __devexit pca_i2c_remove(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+
-+ i2c_del_adapter(&pca_i2c_ops);
-+
-+ if (irq > 0)
-+ free_irq(irq, NULL);
-+
-+ iounmap(base_addr);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ release_mem_region(res->start, PCA_IO_SIZE);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver pca_i2c_driver = {
-+ .probe = pca_i2c_probe,
-+ .remove = __devexit_p(pca_i2c_remove),
-+ .driver = {
-+ .name = "pca9564",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init pca_i2c_init(void)
-+{
-+ return platform_driver_register(&pca_i2c_driver);
-+}
-+
-+static void __exit pca_i2c_exit(void)
-+{
-+ platform_driver_unregister(&pca_i2c_driver);
-+}
-+
-+module_init(pca_i2c_init);
-+module_exit(pca_i2c_exit);
-+
-+MODULE_AUTHOR("Andrew Victor");
-+MODULE_DESCRIPTION("PCA9564 platform driver");
-+MODULE_LICENSE("GPL");
---- a/drivers/mmc/host/at91_mci.c
-+++ b/drivers/mmc/host/at91_mci.c
-@@ -659,13 +659,14 @@ static void at91_mci_set_ios(struct mmc_
- /* maybe switch power to the card */
- if (host->board->vcc_pin) {
- switch (ios->power_mode) {
-- case MMC_POWER_OFF:
-- gpio_set_value(host->board->vcc_pin, 0);
-- break;
-- case MMC_POWER_UP:
-- case MMC_POWER_ON:
-- gpio_set_value(host->board->vcc_pin, 1);
-- break;
-+ case MMC_POWER_OFF:
-+ gpio_set_value(host->board->vcc_pin, 0);
-+ break;
-+ case MMC_POWER_UP:
-+ gpio_set_value(host->board->vcc_pin, 1);
-+ break;
-+ default:
-+ break;
- }
- }
- }
---- a/drivers/mtd/devices/Kconfig
-+++ b/drivers/mtd/devices/Kconfig
-@@ -270,5 +270,17 @@ config MTD_DOCPROBE_55AA
- LinuxBIOS or if you need to recover a DiskOnChip Millennium on which
- you have managed to wipe the first block.
-
--endmenu
-+config MTD_AT91_DATAFLASH
-+ tristate "AT91RM9200 DataFlash AT45DBxxx (legacy driver)"
-+ depends on MTD && ARCH_AT91RM9200 && AT91_SPI
-+ help
-+ This enables access to the DataFlash (AT45DBxxx) on the AT91RM9200.
-+ If you have such a board, say 'Y'.
-+
-+config DATAFLASH_ALWAYS_ADD_DEVICE
-+ bool "Register whole DataFlash device"
-+ depends on MTD_AT91_DATAFLASH
-+ help
-+ Always add the whole DataFlash device when using MTD partitions.
-
-+endmenu
---- a/drivers/mtd/devices/Makefile
-+++ b/drivers/mtd/devices/Makefile
-@@ -17,3 +17,4 @@ obj-$(CONFIG_MTD_LART) += lart.o
- obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
- obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
- obj-$(CONFIG_MTD_M25P80) += m25p80.o
-+obj-$(CONFIG_MTD_AT91_DATAFLASH)+= at91_dataflash.o
---- /dev/null
-+++ b/drivers/mtd/devices/at91_dataflash.c
-@@ -0,0 +1,673 @@
-+/*
-+ * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder)
-+ *
-+ * Copyright (C) SAN People (Pty) Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/pci.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include <asm/mach-types.h>
-+
-+#include <asm/arch/spi.h>
-+
-+
-+#undef DEBUG_DATAFLASH
-+
-+#define DATAFLASH_MAX_DEVICES 4 /* max number of dataflash devices */
-+
-+#define OP_READ_CONTINUOUS 0xE8
-+#define OP_READ_PAGE 0xD2
-+#define OP_READ_BUFFER1 0xD4
-+#define OP_READ_BUFFER2 0xD6
-+#define OP_READ_STATUS 0xD7
-+
-+#define OP_ERASE_PAGE 0x81
-+#define OP_ERASE_BLOCK 0x50
-+
-+#define OP_TRANSFER_BUF1 0x53
-+#define OP_TRANSFER_BUF2 0x55
-+#define OP_COMPARE_BUF1 0x60
-+#define OP_COMPARE_BUF2 0x61
-+
-+#define OP_PROGRAM_VIA_BUF1 0x82
-+#define OP_PROGRAM_VIA_BUF2 0x85
-+
-+struct dataflash_local
-+{
-+ int spi; /* SPI chip-select number */
-+
-+ unsigned int page_size; /* number of bytes per page */
-+ unsigned short page_offset; /* page offset in flash address */
-+};
-+
-+
-+/* Detected DataFlash devices */
-+static struct mtd_info* mtd_devices[DATAFLASH_MAX_DEVICES];
-+static int nr_devices = 0;
-+
-+/* ......................................................................... */
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+
-+static struct mtd_partition static_partitions_2M[] =
-+{
-+ {
-+ .name = "bootloader",
-+ .offset = 0,
-+ .size = 1 * 32 * 8 * 528, /* 1st sector = 32 blocks * 8 pages * 528 bytes */
-+ .mask_flags = MTD_WRITEABLE, /* read-only */
-+ },
-+ {
-+ .name = "kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 6 * 32 * 8 * 528, /* 6 sectors */
-+ },
-+ {
-+ .name = "filesystem",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL, /* rest = 9 sectors */
-+ }
-+};
-+
-+static struct mtd_partition static_partitions_4M[] =
-+{
-+ {
-+ .name = "bootloader",
-+ .offset = 0,
-+ .size = 1 * 64 * 8 * 528, /* 1st sector = 64 blocks * 8 pages * 528 bytes */
-+ .mask_flags = MTD_WRITEABLE, /* read-only */
-+ },
-+ {
-+ .name = "kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 4 * 64 * 8 * 528, /* 4 sectors */
-+ },
-+ {
-+ .name = "filesystem",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL, /* rest = 11 sectors */
-+ }
-+};
-+
-+#if defined(CONFIG_MACH_KAFA)
-+static struct mtd_partition static_partitions_8M[] =
-+{
-+ {
-+ name: "romboot",
-+ offset: 0,
-+ size: 16 * 1056, /* 160 Kb */
-+ mask_flags: MTD_WRITEABLE, /* read-only */
-+ },
-+ {
-+ name: "uboot",
-+ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
-+ size: 128 * 1056, /* 1 MB */
-+ },
-+ {
-+ name: "kernel",
-+ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
-+ size: 1024 * 1056, /* 1 MB */
-+ },
-+ {
-+ name: "filesystem",
-+ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
-+ size: MTDPART_SIZ_FULL,
-+ }
-+};
-+
-+#elif defined(CONFIG_MACH_MULTMDP)
-+
-+static struct mtd_partition static_partitions_8M[] =
-+{
-+ {
-+ .name = "bootloader",
-+ .offset = 0,
-+ .size = 12 * 1056, /* 1st sector = 32 blocks * 8 pages * 1056 bytes */
-+ .mask_flags = MTD_WRITEABLE, /* read-only */
-+ },
-+ {
-+ .name = "configuration",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 20 * 1056,
-+ },
-+ {
-+ .name = "kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 1520 * 1056,
-+ },
-+ {
-+ .name = "filesystem",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL,
-+ }
-+};
-+
-+#else
-+
-+static struct mtd_partition static_partitions_8M[] =
-+{
-+ {
-+ .name = "bootloader",
-+ .offset = 0,
-+ .size = 1 * 32 * 8 * 1056, /* 1st sector = 32 blocks * 8 pages * 1056 bytes */
-+ .mask_flags = MTD_WRITEABLE, /* read-only */
-+ },
-+ {
-+ .name = "kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 5 * 32 * 8 * 1056, /* 5 sectors */
-+ },
-+ {
-+ .name = "filesystem",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL, /* rest = 26 sectors */
-+ }
-+};
-+#endif
-+
-+static const char *part_probes[] = { "cmdlinepart", NULL, };
-+
-+#endif
-+
-+/* ......................................................................... */
-+
-+/* Allocate a single SPI transfer descriptor. We're assuming that if multiple
-+ SPI transfers occur at the same time, spi_access_bus() will serialize them.
-+ If this is not valid, then either (i) each dataflash 'priv' structure
-+ needs it's own transfer descriptor, (ii) we lock this one, or (iii) use
-+ another mechanism. */
-+static struct spi_transfer_list* spi_transfer_desc;
-+
-+/*
-+ * Perform a SPI transfer to access the DataFlash device.
-+ */
-+static int do_spi_transfer(int nr, char* tx, int tx_len, char* rx, int rx_len,
-+ char* txnext, int txnext_len, char* rxnext, int rxnext_len)
-+{
-+ struct spi_transfer_list* list = spi_transfer_desc;
-+
-+ list->tx[0] = tx; list->txlen[0] = tx_len;
-+ list->rx[0] = rx; list->rxlen[0] = rx_len;
-+
-+ list->tx[1] = txnext; list->txlen[1] = txnext_len;
-+ list->rx[1] = rxnext; list->rxlen[1] = rxnext_len;
-+
-+ list->nr_transfers = nr;
-+
-+ return spi_transfer(list);
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Poll the DataFlash device until it is READY.
-+ */
-+static void at91_dataflash_waitready(void)
-+{
-+ char* command = kmalloc(2, GFP_KERNEL);
-+
-+ if (!command)
-+ return;
-+
-+ do {
-+ command[0] = OP_READ_STATUS;
-+ command[1] = 0;
-+
-+ do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
-+ } while ((command[1] & 0x80) == 0);
-+
-+ kfree(command);
-+}
-+
-+/*
-+ * Return the status of the DataFlash device.
-+ */
-+static unsigned short at91_dataflash_status(void)
-+{
-+ unsigned short status;
-+ char* command = kmalloc(2, GFP_KERNEL);
-+
-+ if (!command)
-+ return 0;
-+
-+ command[0] = OP_READ_STATUS;
-+ command[1] = 0;
-+
-+ do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
-+ status = command[1];
-+
-+ kfree(command);
-+ return status;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Erase blocks of flash.
-+ */
-+static int at91_dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
-+{
-+ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
-+ unsigned int pageaddr;
-+ char* command;
-+
-+#ifdef DEBUG_DATAFLASH
-+ printk("dataflash_erase: addr=%i len=%i\n", instr->addr, instr->len);
-+#endif
-+
-+ /* Sanity checks */
-+ if (instr->addr + instr->len > mtd->size)
-+ return -EINVAL;
-+ if ((instr->len % mtd->erasesize != 0) || (instr->len % priv->page_size != 0))
-+ return -EINVAL;
-+ if ((instr->addr % priv->page_size) != 0)
-+ return -EINVAL;
-+
-+ command = kmalloc(4, GFP_KERNEL);
-+ if (!command)
-+ return -ENOMEM;
-+
-+ while (instr->len > 0) {
-+ /* Calculate flash page address */
-+ pageaddr = (instr->addr / priv->page_size) << priv->page_offset;
-+
-+ command[0] = OP_ERASE_PAGE;
-+ command[1] = (pageaddr & 0x00FF0000) >> 16;
-+ command[2] = (pageaddr & 0x0000FF00) >> 8;
-+ command[3] = 0;
-+#ifdef DEBUG_DATAFLASH
-+ printk("ERASE: (%x) %x %x %x [%i]\n", command[0], command[1], command[2], command[3], pageaddr);
-+#endif
-+
-+ /* Send command to SPI device */
-+ spi_access_bus(priv->spi);
-+ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
-+
-+ at91_dataflash_waitready(); /* poll status until ready */
-+ spi_release_bus(priv->spi);
-+
-+ instr->addr += priv->page_size; /* next page */
-+ instr->len -= priv->page_size;
-+ }
-+
-+ kfree(command);
-+
-+ /* Inform MTD subsystem that erase is complete */
-+ instr->state = MTD_ERASE_DONE;
-+ if (instr->callback)
-+ instr->callback(instr);
-+
-+ return 0;
-+}
-+
-+/*
-+ * Read from the DataFlash device.
-+ * from : Start offset in flash device
-+ * len : Amount to read
-+ * retlen : About of data actually read
-+ * buf : Buffer containing the data
-+ */
-+static int at91_dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
-+{
-+ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
-+ unsigned int addr;
-+ char* command;
-+
-+#ifdef DEBUG_DATAFLASH
-+ printk("dataflash_read: %lli .. %lli\n", from, from+len);
-+#endif
-+
-+ *retlen = 0;
-+
-+ /* Sanity checks */
-+ if (!len)
-+ return 0;
-+ if (from + len > mtd->size)
-+ return -EINVAL;
-+
-+ /* Calculate flash page/byte address */
-+ addr = (((unsigned)from / priv->page_size) << priv->page_offset) + ((unsigned)from % priv->page_size);
-+
-+ command = kmalloc(8, GFP_KERNEL);
-+ if (!command)
-+ return -ENOMEM;
-+
-+ command[0] = OP_READ_CONTINUOUS;
-+ command[1] = (addr & 0x00FF0000) >> 16;
-+ command[2] = (addr & 0x0000FF00) >> 8;
-+ command[3] = (addr & 0x000000FF);
-+#ifdef DEBUG_DATAFLASH
-+ printk("READ: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+
-+ /* Send command to SPI device */
-+ spi_access_bus(priv->spi);
-+ do_spi_transfer(2, command, 8, command, 8, buf, len, buf, len);
-+ spi_release_bus(priv->spi);
-+
-+ *retlen = len;
-+ kfree(command);
-+ return 0;
-+}
-+
-+/*
-+ * Write to the DataFlash device.
-+ * to : Start offset in flash device
-+ * len : Amount to write
-+ * retlen : Amount of data actually written
-+ * buf : Buffer containing the data
-+ */
-+static int at91_dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
-+{
-+ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
-+ unsigned int pageaddr, addr, offset, writelen;
-+ size_t remaining;
-+ u_char *writebuf;
-+ unsigned short status;
-+ int res = 0;
-+ char* command;
-+ char* tmpbuf = NULL;
-+
-+#ifdef DEBUG_DATAFLASH
-+ printk("dataflash_write: %lli .. %lli\n", to, to+len);
-+#endif
-+
-+ *retlen = 0;
-+
-+ /* Sanity checks */
-+ if (!len)
-+ return 0;
-+ if (to + len > mtd->size)
-+ return -EINVAL;
-+
-+ command = kmalloc(4, GFP_KERNEL);
-+ if (!command)
-+ return -ENOMEM;
-+
-+ pageaddr = ((unsigned)to / priv->page_size);
-+ offset = ((unsigned)to % priv->page_size);
-+ if (offset + len > priv->page_size)
-+ writelen = priv->page_size - offset;
-+ else
-+ writelen = len;
-+ writebuf = (u_char *)buf;
-+ remaining = len;
-+
-+ /* Allocate temporary buffer */
-+ tmpbuf = kmalloc(priv->page_size, GFP_KERNEL);
-+ if (!tmpbuf) {
-+ kfree(command);
-+ return -ENOMEM;
-+ }
-+
-+ /* Gain access to the SPI bus */
-+ spi_access_bus(priv->spi);
-+
-+ while (remaining > 0) {
-+#ifdef DEBUG_DATAFLASH
-+ printk("write @ %i:%i len=%i\n", pageaddr, offset, writelen);
-+#endif
-+
-+ /* (1) Transfer to Buffer1 */
-+ if (writelen != priv->page_size) {
-+ addr = pageaddr << priv->page_offset;
-+ command[0] = OP_TRANSFER_BUF1;
-+ command[1] = (addr & 0x00FF0000) >> 16;
-+ command[2] = (addr & 0x0000FF00) >> 8;
-+ command[3] = 0;
-+#ifdef DEBUG_DATAFLASH
-+ printk("TRANSFER: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
-+ at91_dataflash_waitready();
-+ }
-+
-+ /* (2) Program via Buffer1 */
-+ addr = (pageaddr << priv->page_offset) + offset;
-+ command[0] = OP_PROGRAM_VIA_BUF1;
-+ command[1] = (addr & 0x00FF0000) >> 16;
-+ command[2] = (addr & 0x0000FF00) >> 8;
-+ command[3] = (addr & 0x000000FF);
-+#ifdef DEBUG_DATAFLASH
-+ printk("PROGRAM: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+ do_spi_transfer(2, command, 4, command, 4, writebuf, writelen, tmpbuf, writelen);
-+ at91_dataflash_waitready();
-+
-+ /* (3) Compare to Buffer1 */
-+ addr = pageaddr << priv->page_offset;
-+ command[0] = OP_COMPARE_BUF1;
-+ command[1] = (addr & 0x00FF0000) >> 16;
-+ command[2] = (addr & 0x0000FF00) >> 8;
-+ command[3] = 0;
-+#ifdef DEBUG_DATAFLASH
-+ printk("COMPARE: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
-+ at91_dataflash_waitready();
-+
-+ /* Get result of the compare operation */
-+ status = at91_dataflash_status();
-+ if (status & 0x40) {
-+ printk("at91_dataflash: Write error on page %i\n", pageaddr);
-+ remaining = 0;
-+ writelen = 0;
-+ res = -EIO;
-+ }
-+
-+ remaining = remaining - writelen;
-+ pageaddr++;
-+ offset = 0;
-+ writebuf += writelen;
-+ *retlen += writelen;
-+
-+ if (remaining > priv->page_size)
-+ writelen = priv->page_size;
-+ else
-+ writelen = remaining;
-+ }
-+
-+ /* Release SPI bus */
-+ spi_release_bus(priv->spi);
-+
-+ kfree(tmpbuf);
-+ kfree(command);
-+ return res;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Initialize and register DataFlash device with MTD subsystem.
-+ */
-+static int __init add_dataflash(int channel, char *name, int IDsize,
-+ int nr_pages, int pagesize, int pageoffset)
-+{
-+ struct mtd_info *device;
-+ struct dataflash_local *priv;
-+#ifdef CONFIG_MTD_PARTITIONS
-+ struct mtd_partition *mtd_parts = 0;
-+ int mtd_parts_nr = 0;
-+#endif
-+
-+ if (nr_devices >= DATAFLASH_MAX_DEVICES) {
-+ printk(KERN_ERR "at91_dataflash: Too many devices detected\n");
-+ return 0;
-+ }
-+
-+ device = kmalloc(sizeof(struct mtd_info) + strlen(name) + 8, GFP_KERNEL);
-+ if (!device)
-+ return -ENOMEM;
-+ memset(device, 0, sizeof(struct mtd_info));
-+
-+ device->name = (char *)&device[1];
-+ sprintf(device->name, "%s.spi%d", name, channel);
-+ device->size = nr_pages * pagesize;
-+ device->erasesize = pagesize;
-+ device->writesize = pagesize;
-+ device->owner = THIS_MODULE;
-+ device->type = MTD_DATAFLASH;
-+ device->flags = MTD_WRITEABLE;
-+ device->erase = at91_dataflash_erase;
-+ device->read = at91_dataflash_read;
-+ device->write = at91_dataflash_write;
-+
-+ priv = (struct dataflash_local *) kmalloc(sizeof(struct dataflash_local), GFP_KERNEL);
-+ if (!priv) {
-+ kfree(device);
-+ return -ENOMEM;
-+ }
-+ memset(priv, 0, sizeof(struct dataflash_local));
-+
-+ priv->spi = channel;
-+ priv->page_size = pagesize;
-+ priv->page_offset = pageoffset;
-+ device->priv = priv;
-+
-+ mtd_devices[nr_devices] = device;
-+ nr_devices++;
-+ printk("at91_dataflash: %s detected [spi%i] (%i bytes)\n", name, channel, device->size);
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+#ifdef CONFIG_MTD_CMDLINE_PARTS
-+ mtd_parts_nr = parse_mtd_partitions(device, part_probes, &mtd_parts, 0);
-+#endif
-+ if (mtd_parts_nr <= 0) {
-+ switch (IDsize) {
-+ case SZ_2M:
-+ mtd_parts = static_partitions_2M;
-+ mtd_parts_nr = ARRAY_SIZE(static_partitions_2M);
-+ break;
-+ case SZ_4M:
-+ mtd_parts = static_partitions_4M;
-+ mtd_parts_nr = ARRAY_SIZE(static_partitions_4M);
-+ break;
-+ case SZ_8M:
-+ mtd_parts = static_partitions_8M;
-+ mtd_parts_nr = ARRAY_SIZE(static_partitions_8M);
-+ break;
-+ }
-+ }
-+
-+ if (mtd_parts_nr > 0) {
-+#ifdef CONFIG_DATAFLASH_ALWAYS_ADD_DEVICE
-+ add_mtd_device(device);
-+#endif
-+ return add_mtd_partitions(device, mtd_parts, mtd_parts_nr);
-+ }
-+#endif
-+ return add_mtd_device(device); /* add whole device */
-+}
-+
-+/*
-+ * Detect and initialize DataFlash device connected to specified SPI channel.
-+ *
-+ * Device Density ID code Nr Pages Page Size Page offset
-+ * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9
-+ * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1025 264 9
-+ * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9
-+ * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9
-+ * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10
-+ * AT45DB0321B 32Mbit (4M) xx1101xx (0x34) 8192 528 10
-+ * AT45DB0642 64Mbit (8M) xx1111xx (0x3c) 8192 1056 11
-+ * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11
-+ */
-+static int __init at91_dataflash_detect(int channel)
-+{
-+ int res = 0;
-+ unsigned short status;
-+
-+ spi_access_bus(channel);
-+ status = at91_dataflash_status();
-+ spi_release_bus(channel);
-+ if (status != 0xff) { /* no dataflash device there */
-+ switch (status & 0x3c) {
-+ case 0x0c: /* 0 0 1 1 */
-+ res = add_dataflash(channel, "AT45DB011B", SZ_128K, 512, 264, 9);
-+ break;
-+ case 0x14: /* 0 1 0 1 */
-+ res = add_dataflash(channel, "AT45DB021B", SZ_256K, 1025, 264, 9);
-+ break;
-+ case 0x1c: /* 0 1 1 1 */
-+ res = add_dataflash(channel, "AT45DB041B", SZ_512K, 2048, 264, 9);
-+ break;
-+ case 0x24: /* 1 0 0 1 */
-+ res = add_dataflash(channel, "AT45DB081B", SZ_1M, 4096, 264, 9);
-+ break;
-+ case 0x2c: /* 1 0 1 1 */
-+ res = add_dataflash(channel, "AT45DB161B", SZ_2M, 4096, 528, 10);
-+ break;
-+ case 0x34: /* 1 1 0 1 */
-+ res = add_dataflash(channel, "AT45DB321B", SZ_4M, 8192, 528, 10);
-+ break;
-+ case 0x3c: /* 1 1 1 1 */
-+ res = add_dataflash(channel, "AT45DB642", SZ_8M, 8192, 1056, 11);
-+ break;
-+// Currently unsupported since Atmel removed the "Main Memory Program via Buffer" commands.
-+// case 0x10: /* 0 1 0 0 */
-+// res = add_dataflash(channel, "AT45DB1282", SZ_16M, 16384, 1056, 11);
-+// break;
-+ default:
-+ printk(KERN_ERR "at91_dataflash: Unknown device (%x)\n", status & 0x3c);
-+ }
-+ }
-+
-+ return res;
-+}
-+
-+static int __init at91_dataflash_init(void)
-+{
-+ spi_transfer_desc = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
-+ if (!spi_transfer_desc)
-+ return -ENOMEM;
-+
-+ /* DataFlash (SPI chip select 0) */
-+ at91_dataflash_detect(0);
-+
-+ if (machine_is_sweda_tms())
-+ at91_dataflash_detect(1); /* DataFlash device (SPI chip select 1) */
-+
-+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-+ /* DataFlash card (SPI chip select 3) */
-+ at91_dataflash_detect(3);
-+#endif
-+
-+ return 0;
-+}
-+
-+static void __exit at91_dataflash_exit(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < DATAFLASH_MAX_DEVICES; i++) {
-+ if (mtd_devices[i]) {
-+#ifdef CONFIG_MTD_PARTITIONS
-+ del_mtd_partitions(mtd_devices[i]);
-+#else
-+ del_mtd_device(mtd_devices[i]);
-+#endif
-+ kfree(mtd_devices[i]->priv);
-+ kfree(mtd_devices[i]);
-+ }
-+ }
-+ nr_devices = 0;
-+ kfree(spi_transfer_desc);
-+}
-+
-+
-+module_init(at91_dataflash_init);
-+module_exit(at91_dataflash_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Andrew Victor");
-+MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200");
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -273,12 +273,53 @@ config MTD_NAND_CS553X
- If you say "m", the module will be called "cs553x_nand.ko".
-
- config MTD_NAND_AT91
-- bool "Support for NAND Flash / SmartMedia on AT91"
-+ tristate "Support for NAND Flash / SmartMedia on AT91"
- depends on ARCH_AT91
- help
- Enables support for NAND Flash / Smart Media Card interface
- on Atmel AT91 processors.
-
-+choice
-+ prompt "ECC management for NAND Flash / SmartMedia on AT91"
-+ depends on MTD_NAND_AT91
-+
-+config MTD_NAND_AT91_ECC_SOFT
-+ bool "Software ECC"
-+ depends on MTD_NAND_AT91
-+ help
-+ Uses software ECC.
-+
-+ NB : hardware and software ECC schemes are incompatible.
-+ If you switch from one to another, you'll have to erase your
-+ mtd partition.
-+
-+config MTD_NAND_AT91_ECC_HW
-+ bool "Hardware ECC"
-+ depends on MTD_NAND_AT91 && (ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9)
-+ help
-+ Uses hardware ECC provided by the AT91 processor
-+ instead of software ECC.
-+ The hardware ECC controller is capable of single bit error
-+ correction and 2-bit random detection per page.
-+
-+ NB : hardware and software ECC schemes are incompatible.
-+ If you switch from one to another, you'll have to erase your
-+ mtd partition.
-+
-+ If unsure, say Y
-+
-+config MTD_NAND_AT91_ECC_NONE
-+ bool "No ECC (Testing Only)"
-+ depends on MTD_NAND_AT91
-+ help
-+ No ECC will be used.
-+ It's not a good idea and it should be reserved for testing
-+ purpose only.
-+
-+ If unsure, say N
-+
-+endchoice
-+
- config MTD_NAND_CM_X270
- tristate "Support for NAND Flash on CM-X270 modules"
- depends on MTD_NAND && MACH_ARMCORE
---- a/drivers/mtd/nand/at91_nand.c
-+++ b/drivers/mtd/nand/at91_nand.c
-@@ -9,6 +9,15 @@
- * Derived from drivers/mtd/spia.c
- * Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
- *
-+ *
-+ * Add Hardware ECC support for AT91SAM9260 / AT91SAM9263
-+ * Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright (C) 2007
-+ *
-+ * Derived from Das U-Boot source code
-+ * (u-boot-1.1.5/board/atmel/at91sam9263ek/nand.c)
-+ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
-+ *
-+ *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-@@ -28,15 +37,75 @@
- #include <asm/hardware.h>
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
-+#include <asm/arch/at91_ecc.h>
-+
-+#ifdef CONFIG_MTD_NAND_AT91_ECC_HW
-+#define hard_ecc 1
-+#else
-+#define hard_ecc 0
-+#endif
-+
-+#ifdef CONFIG_MTD_NAND_AT91_ECC_NONE
-+#define no_ecc 1
-+#else
-+#define no_ecc 0
-+#endif
-+
-+/* Register access macros */
-+#define ecc_readl(base, reg) __raw_readl(base + reg)
-+#define ecc_writel(base, reg, value) __raw_writel((value), base + reg)
-+
-+
-+/*
-+ * OOB layout for large page size.
-+ * bad block info is on bytes 0 and 1
-+ * the bytes must be consecutives to avoid several NAND_CMD_RNDOUT during read.
-+ */
-+static struct nand_ecclayout at91_oobinfo_large = {
-+ .eccbytes = 4,
-+ .eccpos = {60, 61, 62, 63},
-+ .oobfree = { {2, 58} },
-+};
-+
-+/*
-+ * OOB layout for small page size
-+ * bad block info is on bytes 4 and 5
-+ * the bytes must be consecutives to avoid several NAND_CMD_RNDOUT during read.
-+ */
-+static struct nand_ecclayout at91_oobinfo_small = {
-+ .eccbytes = 4,
-+ .eccpos = {0, 1, 2, 3},
-+ .oobfree = { {6, 10} },
-+};
-
- struct at91_nand_host {
- struct nand_chip nand_chip;
- struct mtd_info mtd;
- void __iomem *io_base;
- struct at91_nand_data *board;
-+ struct device *dev;
-+ void __iomem *ecc;
- };
-
- /*
-+ * Enable NAND chip-select.
-+ */
-+static void at91_nand_enable(struct at91_nand_host *host)
-+{
-+ if (host->board->enable_pin)
-+ at91_set_gpio_value(host->board->enable_pin, 0);
-+}
-+
-+/*
-+ * Disable NAND chip-select.
-+ */
-+static void at91_nand_disable(struct at91_nand_host *host)
-+{
-+ if (host->board->enable_pin)
-+ at91_set_gpio_value(host->board->enable_pin, 1);
-+}
-+
-+/*
- * Hardware specific access to control-lines
- */
- static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-@@ -44,6 +113,13 @@ static void at91_nand_cmd_ctrl(struct mt
- struct nand_chip *nand_chip = mtd->priv;
- struct at91_nand_host *host = nand_chip->priv;
-
-+ if (ctrl & NAND_CTRL_CHANGE) {
-+ if (ctrl & NAND_NCE)
-+ at91_nand_enable(host);
-+ else
-+ at91_nand_disable(host);
-+ }
-+
- if (cmd == NAND_CMD_NONE)
- return;
-
-@@ -65,27 +141,249 @@ static int at91_nand_device_ready(struct
- }
-
- /*
-- * Enable NAND.
-+ * write oob for small pages
- */
--static void at91_nand_enable(struct at91_nand_host *host)
-+static int at91_nand_write_oob_512(struct mtd_info *mtd,
-+ struct nand_chip *chip, int page)
- {
-- if (host->board->enable_pin)
-- at91_set_gpio_value(host->board->enable_pin, 0);
-+ int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
-+ int eccsize = chip->ecc.size, length = mtd->oobsize;
-+ int len, pos, status = 0;
-+ const uint8_t *bufpoi = chip->oob_poi;
-+
-+ pos = eccsize + chunk;
-+
-+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
-+ len = min_t(int, length, chunk);
-+ chip->write_buf(mtd, bufpoi, len);
-+ bufpoi += len;
-+ length -= len;
-+ if (length > 0)
-+ chip->write_buf(mtd, bufpoi, length);
-+
-+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
-+ status = chip->waitfunc(mtd, chip);
-+
-+ return status & NAND_STATUS_FAIL ? -EIO : 0;
-+
- }
-
- /*
-- * Disable NAND.
-+ * read oob for small pages
- */
--static void at91_nand_disable(struct at91_nand_host *host)
-+static int at91_nand_read_oob_512(struct mtd_info *mtd,
-+ struct nand_chip *chip, int page, int sndcmd)
- {
-- if (host->board->enable_pin)
-- at91_set_gpio_value(host->board->enable_pin, 1);
-+ if (sndcmd) {
-+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
-+ sndcmd = 0;
-+ }
-+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-+ return sndcmd;
-+}
-+
-+/*
-+ * Calculate HW ECC
-+ *
-+ * mtd: MTD block structure
-+ * dat: raw data (unused)
-+ * ecc_code: buffer for ECC
-+ */
-+static int at91_nand_calculate(struct mtd_info *mtd,
-+ const u_char *dat, unsigned char *ecc_code)
-+{
-+ struct nand_chip *nand_chip = mtd->priv;
-+ struct at91_nand_host *host = nand_chip->priv;
-+ uint32_t *eccpos = nand_chip->ecc.layout->eccpos;
-+ unsigned int ecc_value;
-+
-+ /* get the first 2 ECC bytes */
-+ ecc_value = ecc_readl(host->ecc, AT91_ECC_PR) & (AT91_ECC_BITADDR | AT91_ECC_WORDADDR);
-+
-+ ecc_code[eccpos[0]] = ecc_value & 0xFF;
-+ ecc_code[eccpos[1]] = (ecc_value >> 8) & 0xFF;
-+
-+ /* get the last 2 ECC bytes */
-+ ecc_value = ecc_readl(host->ecc, AT91_ECC_NPR) & AT91_ECC_NPARITY;
-+
-+ ecc_code[eccpos[2]] = ecc_value & 0xFF;
-+ ecc_code[eccpos[3]] = (ecc_value >> 8) & 0xFF;
-+
-+ return 0;
- }
-
-+/*
-+ * HW ECC read page function
-+ *
-+ * mtd: mtd info structure
-+ * chip: nand chip info structure
-+ * buf: buffer to store read data
-+ */
-+static int at91_nand_read_page(struct mtd_info *mtd,
-+ struct nand_chip *chip, uint8_t *buf)
-+{
-+ int eccsize = chip->ecc.size;
-+ int eccbytes = chip->ecc.bytes;
-+ uint32_t *eccpos = chip->ecc.layout->eccpos;
-+ uint8_t *p = buf;
-+ uint8_t *oob = chip->oob_poi;
-+ uint8_t *ecc_pos;
-+ int stat;
-+
-+ /* read the page */
-+ chip->read_buf(mtd, p, eccsize);
-+
-+ /* move to ECC position if needed */
-+ if (eccpos[0] != 0) {
-+ /*
-+ * This only works on large pages because the ECC controller
-+ * waits for NAND_CMD_RNDOUTSTART after the NAND_CMD_RNDOUT.
-+ * Anyway, for small pages, the eccpos[0] == 0
-+ */
-+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
-+ mtd->writesize + eccpos[0], -1);
-+ }
-+
-+ /* the ECC controller needs to read the ECC just after the data */
-+ ecc_pos = oob + eccpos[0];
-+ chip->read_buf(mtd, ecc_pos, eccbytes);
-+
-+ /* check if there's an error */
-+ stat = chip->ecc.correct(mtd, p, oob, NULL);
-+
-+ if (stat < 0)
-+ mtd->ecc_stats.failed++;
-+ else
-+ mtd->ecc_stats.corrected += stat;
-+
-+ /* get back to oob start (end of page) */
-+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
-+
-+ /* read the oob */
-+ chip->read_buf(mtd, oob, mtd->oobsize);
-+
-+ return 0;
-+}
-+
-+/*
-+ * HW ECC Correction
-+ *
-+ * mtd: MTD block structure
-+ * dat: raw data read from the chip
-+ * read_ecc: ECC from the chip (unused)
-+ * isnull: unused
-+ *
-+ * Detect and correct a 1 bit error for a page
-+ */
-+static int at91_nand_correct(struct mtd_info *mtd, u_char *dat,
-+ u_char *read_ecc, u_char *isnull)
-+{
-+ struct nand_chip *nand_chip = mtd->priv;
-+ struct at91_nand_host *host = nand_chip->priv;
-+ unsigned int ecc_status;
-+ unsigned int ecc_word, ecc_bit;
-+
-+ /* get the status from the Status Register */
-+ ecc_status = ecc_readl(host->ecc, AT91_ECC_SR);
-+
-+ /* if there's no error */
-+ if (likely(!(ecc_status & AT91_ECC_RECERR)))
-+ return 0;
-+
-+ /* get error bit offset (4 bits) */
-+ ecc_bit = ecc_readl(host->ecc, AT91_ECC_PR) & AT91_ECC_BITADDR;
-+ /* get word address (12 bits) */
-+ ecc_word = ecc_readl(host->ecc, AT91_ECC_PR) & AT91_ECC_WORDADDR;
-+ ecc_word >>= 4;
-+
-+ /* if there are multiple errors */
-+ if (ecc_status & AT91_ECC_MULERR) {
-+ /* Check if it is a freshly erased block (filled with 0xff) */
-+ if ((ecc_bit == AT91_ECC_BITADDR)
-+ && (ecc_word == (AT91_ECC_WORDADDR >> 4))) {
-+ /* the block has just been erased, return OK */
-+ return 0;
-+ }
-+ /*
-+ * It doesn't seems to be a freshly-erased block.
-+ * We can't correct so many errors.
-+ */
-+ dev_dbg(host->dev, "at91_nand : multiple errors detected."
-+ " Unable to correct.\n");
-+ return -EIO;
-+ }
-+
-+ /* if there's a single bit error : we can correct it */
-+ if (ecc_status & AT91_ECC_ECCERR) {
-+ /*
-+ * There's nothing much to do here.
-+ * The bit error is on the ECC itself.
-+ */
-+ dev_dbg(host->dev, "at91_nand : one bit error on ECC code."
-+ " Nothing to correct\n");
-+ return 0;
-+ }
-+
-+ dev_dbg(host->dev, "at91_nand : one bit error on data."
-+ " (word offset in the page :"
-+ " 0x%x bit offset : 0x%x)\n",
-+ ecc_word, ecc_bit);
-+ /* correct the error */
-+ if (nand_chip->options & NAND_BUSWIDTH_16) {
-+ /* 16 bits words */
-+ ((unsigned short *) dat)[ecc_word] ^= (1 << ecc_bit);
-+ } else {
-+ /* 8 bits words */
-+ dat[ecc_word] ^= (1 << ecc_bit);
-+ }
-+ dev_dbg(host->dev, "at91_nand : error corrected\n");
-+ return 1;
-+}
-+
-+/*
-+ * Enable HW ECC : unsused
-+ */
-+static void at91_nand_hwctl(struct mtd_info *mtd, int mode) { ; }
-+
-+/*
-+ * Over-ride the standard functions with our optimized versions.
-+ * We can use read/write blocks to move data to/from the controller.
-+ */
-+static void at91_read_buf8(struct mtd_info *mtd, u8 *buf, int len)
-+{
-+ struct nand_chip *nand_chip = mtd->priv;
-+
-+ __raw_readsb(nand_chip->IO_ADDR_R, buf, len);
-+}
-+
-+static void at91_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
-+{
-+ struct nand_chip *nand_chip = mtd->priv;
-+
-+ __raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
-+}
-+
-+static void at91_write_buf8(struct mtd_info *mtd, const u8 *buf, int len)
-+{
-+ struct nand_chip *nand_chip = mtd->priv;
-+
-+ __raw_writesb(nand_chip->IO_ADDR_W, buf, len);
-+}
-+
-+static void at91_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
-+{
-+ struct nand_chip *nand_chip = mtd->priv;
-+
-+ __raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
-+}
-+
-+
- #ifdef CONFIG_MTD_PARTITIONS
--const char *part_probes[] = { "cmdlinepart", NULL };
-+static const char *part_probes[] = { "cmdlinepart", NULL };
- #endif
-
-+static char* ecc_modes[] __initdata = { "No", "Software", "Hardware" };
-+
- /*
- * Probe for the NAND device.
- */
-@@ -94,6 +392,8 @@ static int __init at91_nand_probe(struct
- struct at91_nand_host *host;
- struct mtd_info *mtd;
- struct nand_chip *nand_chip;
-+ struct resource *regs;
-+ struct resource *mem;
- int res;
-
- #ifdef CONFIG_MTD_PARTITIONS
-@@ -108,8 +408,13 @@ static int __init at91_nand_probe(struct
- return -ENOMEM;
- }
-
-- host->io_base = ioremap(pdev->resource[0].start,
-- pdev->resource[0].end - pdev->resource[0].start + 1);
-+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!mem) {
-+ printk(KERN_ERR "at91_nand: can't get I/O resource mem\n");
-+ return -ENXIO;
-+ }
-+
-+ host->io_base = ioremap(mem->start, mem->end - mem->start + 1);
- if (host->io_base == NULL) {
- printk(KERN_ERR "at91_nand: ioremap failed\n");
- kfree(host);
-@@ -119,6 +424,7 @@ static int __init at91_nand_probe(struct
- mtd = &host->mtd;
- nand_chip = &host->nand_chip;
- host->board = pdev->dev.platform_data;
-+ host->dev = &pdev->dev;
-
- nand_chip->priv = host; /* link the private data structures */
- mtd->priv = nand_chip;
-@@ -132,11 +438,40 @@ static int __init at91_nand_probe(struct
- if (host->board->rdy_pin)
- nand_chip->dev_ready = at91_nand_device_ready;
-
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+ if (!regs && hard_ecc) {
-+ printk(KERN_ERR "at91_nand: can't get I/O resource "
-+ "regs\nFalling back on software ECC\n");
-+ }
-+
- nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */
-+ if (no_ecc)
-+ nand_chip->ecc.mode = NAND_ECC_NONE;
-+ if (hard_ecc && regs) {
-+ host->ecc = (void __force __iomem *) (AT91_VA_BASE_SYS - AT91_BASE_SYS);
-+ host->ecc += regs->start;
-+
-+ nand_chip->ecc.mode = NAND_ECC_HW_SYNDROME; /* HW SYNDROME ECC */
-+ nand_chip->ecc.calculate = at91_nand_calculate; /* function called after a write */
-+ nand_chip->ecc.correct = at91_nand_correct; /* function called after a read */
-+ nand_chip->ecc.hwctl = at91_nand_hwctl; /* unused */
-+ nand_chip->ecc.read_page = at91_nand_read_page; /* read page function */
-+ nand_chip->ecc.bytes = 4; /* 4 ECC bytes for any page size */
-+ nand_chip->ecc.prepad = 0;
-+ nand_chip->ecc.postpad = 0;
-+ }
-+
- nand_chip->chip_delay = 20; /* 20us command delay time */
-
-- if (host->board->bus_width_16) /* 16-bit bus width */
-+ if (host->board->bus_width_16) { /* 16-bit bus width */
- nand_chip->options |= NAND_BUSWIDTH_16;
-+ nand_chip->read_buf = at91_read_buf16;
-+ nand_chip->write_buf = at91_write_buf16;
-+ }
-+ else {
-+ nand_chip->read_buf = at91_read_buf8;
-+ nand_chip->write_buf = at91_write_buf8;
-+ }
-
- platform_set_drvdata(pdev, host);
- at91_nand_enable(host);
-@@ -149,8 +484,60 @@ static int __init at91_nand_probe(struct
- }
- }
-
-- /* Scan to find existance of the device */
-- if (nand_scan(mtd, 1)) {
-+ /* first scan to find the device and get the page size */
-+ if (nand_scan_ident(mtd, 1)) {
-+ res = -ENXIO;
-+ goto out;
-+ }
-+
-+ if (nand_chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
-+ /* ECC is calculated for the whole page (1 step) */
-+ nand_chip->ecc.size = mtd->writesize;
-+
-+ /* set ECC page size and oob layout */
-+ switch (mtd->writesize) {
-+ case 512:
-+ nand_chip->ecc.layout = &at91_oobinfo_small;
-+ nand_chip->ecc.read_oob = at91_nand_read_oob_512;
-+ nand_chip->ecc.write_oob = at91_nand_write_oob_512;
-+ ecc_writel(host->ecc, AT91_ECC_MR, AT91_ECC_PAGESIZE_528);
-+ break;
-+ case 1024:
-+ nand_chip->ecc.layout = &at91_oobinfo_large;
-+ ecc_writel(host->ecc, AT91_ECC_MR, AT91_ECC_PAGESIZE_1056);
-+ break;
-+ case 2048:
-+ nand_chip->ecc.layout = &at91_oobinfo_large;
-+ ecc_writel(host->ecc, AT91_ECC_MR, AT91_ECC_PAGESIZE_2112);
-+ break;
-+ case 4096:
-+ nand_chip->ecc.layout = &at91_oobinfo_large;
-+ ecc_writel(host->ecc, AT91_ECC_MR, AT91_ECC_PAGESIZE_4224);
-+ break;
-+ default:
-+ /*
-+ * Page size not supported by HW ECC.
-+ * So switch back to soft ECC
-+ */
-+ nand_chip->ecc.mode = NAND_ECC_SOFT;
-+ nand_chip->ecc.calculate = NULL;
-+ nand_chip->ecc.correct = NULL;
-+ nand_chip->ecc.hwctl = NULL;
-+ nand_chip->ecc.read_page = NULL;
-+ nand_chip->ecc.postpad = 0;
-+ nand_chip->ecc.prepad = 0;
-+ nand_chip->ecc.bytes = 0;
-+ break;
-+ }
-+ }
-+
-+ printk(KERN_INFO "AT91 NAND: %i-bit, %s ECC\n",
-+ (nand_chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
-+ ecc_modes[nand_chip->ecc.mode]
-+ );
-+
-+ /* second phase scan */
-+ if (nand_scan_tail(mtd)) {
- res = -ENXIO;
- goto out;
- }
-@@ -179,8 +566,11 @@ static int __init at91_nand_probe(struct
- if (!res)
- return res;
-
-+#ifdef CONFIG_MTD_PARTITIONS
- release:
-+#endif
- nand_release(mtd);
-+
- out:
- at91_nand_disable(host);
- platform_set_drvdata(pdev, NULL);
-@@ -192,7 +582,7 @@ out:
- /*
- * Remove a NAND device.
- */
--static int __devexit at91_nand_remove(struct platform_device *pdev)
-+static int __exit at91_nand_remove(struct platform_device *pdev)
- {
- struct at91_nand_host *host = platform_get_drvdata(pdev);
- struct mtd_info *mtd = &host->mtd;
-@@ -208,8 +598,7 @@ static int __devexit at91_nand_remove(st
- }
-
- static struct platform_driver at91_nand_driver = {
-- .probe = at91_nand_probe,
-- .remove = at91_nand_remove,
-+ .remove = __exit_p(at91_nand_remove),
- .driver = {
- .name = "at91_nand",
- .owner = THIS_MODULE,
-@@ -218,7 +607,7 @@ static struct platform_driver at91_nand_
-
- static int __init at91_nand_init(void)
- {
-- return platform_driver_register(&at91_nand_driver);
-+ return platform_driver_probe(&at91_nand_driver, at91_nand_probe);
- }
-
-
-@@ -233,4 +622,4 @@ module_exit(at91_nand_exit);
-
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Rick Bronson");
--MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200");
-+MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200 / AT91SAM9 / AT91CAP9");
---- a/drivers/net/arm/Kconfig
-+++ b/drivers/net/arm/Kconfig
-@@ -47,3 +47,10 @@ config EP93XX_ETH
- help
- This is a driver for the ethernet hardware included in EP93xx CPUs.
- Say Y if you are building a kernel for EP93xx based devices.
-+
-+config ARM_KS8695_ETHER
-+ tristate "KS8695 Ethernet support"
-+ depends on NET_ETHERNET && ARM && ARCH_KS8695
-+ help
-+ If you wish to compile a kernel for an KS8695-based board
-+ and enable Ethernet support, then select this option.
---- a/drivers/net/arm/Makefile
-+++ b/drivers/net/arm/Makefile
-@@ -9,3 +9,4 @@ obj-$(CONFIG_ARM_ETHER3) += ether3.o
- obj-$(CONFIG_ARM_ETHER1) += ether1.o
- obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
- obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
-+obj-$(CONFIG_ARM_KS8695_ETHER) += ks8695_ether.o
---- a/drivers/net/arm/at91_ether.c
-+++ b/drivers/net/arm/at91_ether.c
-@@ -220,7 +220,7 @@ static irqreturn_t at91ether_phy_interru
- if (!(phy & (1 << 0)))
- goto done;
- }
-- else if (lp->phy_type == MII_KS8721_ID) {
-+ else if ((lp->phy_type == MII_KS8721_ID) || (lp->phy_type == MII_KSZ8041_ID)) {
- read_phy(lp->phy_address, MII_TPISTATUS, &phy); /* ack interrupt in Micrel PHY */
- if (!(phy & ((1 << 2) | 1)))
- goto done;
-@@ -286,7 +286,7 @@ static void enable_phyirq(struct net_dev
- dsintr = (1 << 15) | ( 1 << 14);
- write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr);
- }
-- else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */
-+ else if ((lp->phy_type == MII_KS8721_ID) || (lp->phy_type == MII_KSZ8041_ID)) { /* for Micrel PHY */
- dsintr = (1 << 10) | ( 1 << 8);
- write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
- }
-@@ -341,7 +341,7 @@ static void disable_phyirq(struct net_de
- dsintr = ~(1 << 14);
- write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr);
- }
-- else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */
-+ else if ((lp->phy_type == MII_KS8721_ID) || (lp->phy_type == MII_KSZ8041_ID)) { /* for Micrel PHY */
- read_phy(lp->phy_address, MII_TPISTATUS, &dsintr);
- dsintr = ~((1 << 10) | (1 << 8));
- write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
-@@ -820,7 +820,7 @@ static int at91ether_tx(struct sk_buff *
- lp->skb = skb;
- lp->skb_length = skb->len;
- lp->skb_physaddr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
-- lp->stats.tx_bytes += skb->len;
-+ dev->stats.tx_bytes += skb->len;
-
- /* Set address of the data in the Transmit Address register */
- at91_emac_write(AT91_EMAC_TAR, lp->skb_physaddr);
-@@ -843,34 +843,32 @@ static int at91ether_tx(struct sk_buff *
- */
- static struct net_device_stats *at91ether_stats(struct net_device *dev)
- {
-- struct at91_private *lp = netdev_priv(dev);
-- int ale, lenerr, seqe, lcol, ecol;
-+ int ale, lenerr, seqe, ecol;
-
- if (netif_running(dev)) {
-- lp->stats.rx_packets += at91_emac_read(AT91_EMAC_OK); /* Good frames received */
-+ dev->stats.rx_packets += at91_emac_read(AT91_EMAC_OK); /* Good frames received */
- ale = at91_emac_read(AT91_EMAC_ALE);
-- lp->stats.rx_frame_errors += ale; /* Alignment errors */
-+ dev->stats.rx_frame_errors += ale; /* Alignment errors */
- lenerr = at91_emac_read(AT91_EMAC_ELR) + at91_emac_read(AT91_EMAC_USF);
-- lp->stats.rx_length_errors += lenerr; /* Excessive Length or Undersize Frame error */
-+ dev->stats.rx_length_errors += lenerr; /* Excessive Length or Undersize Frame error */
- seqe = at91_emac_read(AT91_EMAC_SEQE);
-- lp->stats.rx_crc_errors += seqe; /* CRC error */
-- lp->stats.rx_fifo_errors += at91_emac_read(AT91_EMAC_DRFC); /* Receive buffer not available */
-- lp->stats.rx_errors += (ale + lenerr + seqe
-+ dev->stats.rx_crc_errors += seqe; /* CRC error */
-+ dev->stats.rx_fifo_errors += at91_emac_read(AT91_EMAC_DRFC); /* Receive buffer not available */
-+ dev->stats.rx_errors += (ale + lenerr + seqe
- + at91_emac_read(AT91_EMAC_CDE) + at91_emac_read(AT91_EMAC_RJB));
-
-- lp->stats.tx_packets += at91_emac_read(AT91_EMAC_FRA); /* Frames successfully transmitted */
-- lp->stats.tx_fifo_errors += at91_emac_read(AT91_EMAC_TUE); /* Transmit FIFO underruns */
-- lp->stats.tx_carrier_errors += at91_emac_read(AT91_EMAC_CSE); /* Carrier Sense errors */
-- lp->stats.tx_heartbeat_errors += at91_emac_read(AT91_EMAC_SQEE);/* Heartbeat error */
-+ dev->stats.tx_packets += at91_emac_read(AT91_EMAC_FRA); /* Frames successfully transmitted */
-+ dev->stats.tx_fifo_errors += at91_emac_read(AT91_EMAC_TUE); /* Transmit FIFO underruns */
-+ dev->stats.tx_carrier_errors += at91_emac_read(AT91_EMAC_CSE); /* Carrier Sense errors */
-+ dev->stats.tx_heartbeat_errors += at91_emac_read(AT91_EMAC_SQEE);/* Heartbeat error */
-
-- lcol = at91_emac_read(AT91_EMAC_LCOL);
-+ dev->stats.tx_window_errors += at91_emac_read(AT91_EMAC_LCOL); /* Late collisions */
- ecol = at91_emac_read(AT91_EMAC_ECOL);
-- lp->stats.tx_window_errors += lcol; /* Late collisions */
-- lp->stats.tx_aborted_errors += ecol; /* 16 collisions */
-+ dev->stats.tx_aborted_errors += ecol; /* 16 collisions */
-
-- lp->stats.collisions += (at91_emac_read(AT91_EMAC_SCOL) + at91_emac_read(AT91_EMAC_MCOL) + lcol + ecol);
-+ dev->stats.collisions += (at91_emac_read(AT91_EMAC_SCOL) + at91_emac_read(AT91_EMAC_MCOL) + ecol);
- }
-- return &lp->stats;
-+ return &dev->stats;
- }
-
- /*
-@@ -896,16 +894,16 @@ static void at91ether_rx(struct net_devi
-
- skb->protocol = eth_type_trans(skb, dev);
- dev->last_rx = jiffies;
-- lp->stats.rx_bytes += pktlen;
-+ dev->stats.rx_bytes += pktlen;
- netif_rx(skb);
- }
- else {
-- lp->stats.rx_dropped += 1;
-+ dev->stats.rx_dropped += 1;
- printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
- }
-
- if (dlist->descriptors[lp->rxBuffIndex].size & EMAC_MULTICAST)
-- lp->stats.multicast++;
-+ dev->stats.multicast++;
-
- dlist->descriptors[lp->rxBuffIndex].addr &= ~EMAC_DESC_DONE; /* reset ownership bit */
- if (lp->rxBuffIndex == MAX_RX_DESCR-1) /* wrap after last buffer */
-@@ -934,7 +932,7 @@ static irqreturn_t at91ether_interrupt(i
- if (intstatus & AT91_EMAC_TCOM) { /* Transmit complete */
- /* The TCOM bit is set even if the transmission failed. */
- if (intstatus & (AT91_EMAC_TUND | AT91_EMAC_RTRY))
-- lp->stats.tx_errors += 1;
-+ dev->stats.tx_errors += 1;
-
- if (lp->skb) {
- dev_kfree_skb_irq(lp->skb);
-@@ -978,15 +976,22 @@ static int __init at91ether_setup(unsign
- struct net_device *dev;
- struct at91_private *lp;
- unsigned int val;
-- int res;
-+ struct resource *res;
-+ int ret;
- DECLARE_MAC_BUF(mac);
-
- dev = alloc_etherdev(sizeof(struct at91_private));
- if (!dev)
- return -ENOMEM;
-
-- dev->base_addr = AT91_VA_BASE_EMAC;
-- dev->irq = AT91RM9200_ID_EMAC;
-+ /* Get I/O base address and IRQ */
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res) {
-+ free_netdev(dev);
-+ return -ENODEV;
-+ }
-+ dev->base_addr = res->start;
-+ dev->irq = platform_get_irq(pdev, 0);
-
- /* Install the interrupt handler */
- if (request_irq(dev->irq, at91ether_interrupt, 0, dev->name, dev)) {
-@@ -1043,7 +1048,9 @@ static int __init at91ether_setup(unsign
- } else if (machine_is_csb337()) {
- /* mix link activity status into LED2 link state */
- write_phy(phy_address, MII_LEDCTRL_REG, 0x0d22);
-- }
-+ } else if (machine_is_ecbat91())
-+ write_phy(phy_address, MII_LEDCTRL_REG, 0x156A);
-+
- disable_mdi();
- spin_unlock_irq(&lp->lock);
-
-@@ -1058,12 +1065,12 @@ static int __init at91ether_setup(unsign
- lp->phy_address = phy_address; /* MDI address of PHY */
-
- /* Register the network interface */
-- res = register_netdev(dev);
-- if (res) {
-+ ret = register_netdev(dev);
-+ if (ret) {
- free_irq(dev->irq, dev);
- free_netdev(dev);
- dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
-- return res;
-+ return ret;
- }
-
- /* Determine current link speed */
-@@ -1101,6 +1108,8 @@ static int __init at91ether_setup(unsign
- printk(KERN_INFO "%s: National Semiconductor DP83848 PHY\n", dev->name);
- else if (phy_type == MII_AC101L_ID)
- printk(KERN_INFO "%s: Altima AC101L PHY\n", dev->name);
-+ else if (phy_type == MII_KSZ8041_ID)
-+ printk(KERN_INFO "%s: Micrel KSZ8041 PHY\n", dev->name);
- else if (phy_type == MII_KS8721_ID)
- printk(KERN_INFO "%s: Micrel KS8721 PHY\n", dev->name);
- else if (phy_type == MII_T78Q21x3_ID)
-@@ -1146,6 +1155,7 @@ static int __init at91ether_probe(struct
- case MII_DP83847_ID: /* National Semiconductor DP83847: */
- case MII_DP83848_ID: /* National Semiconductor DP83848: */
- case MII_AC101L_ID: /* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */
-+ case MII_KSZ8041_ID: /* Micrel KSZ8041: PHY_ID1 = 0x22, PHY_ID2 = 0x1512 */
- case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */
- case MII_T78Q21x3_ID: /* Teridian 78Q21x3: PHY_ID1 = 0x0E, PHY_ID2 = 7237 */
- case MII_LAN83C185_ID: /* SMSC LAN83C185: PHY_ID1 = 0x0007, PHY_ID2 = 0xC0A1 */
-@@ -1246,3 +1256,4 @@ module_exit(at91ether_exit)
- MODULE_LICENSE("GPL");
- MODULE_DESCRIPTION("AT91RM9200 EMAC Ethernet driver");
- MODULE_AUTHOR("Andrew Victor");
-+MODULE_ALIAS("platform:" DRV_NAME);
---- a/drivers/net/arm/at91_ether.h
-+++ b/drivers/net/arm/at91_ether.h
-@@ -48,6 +48,9 @@
- /* Altima AC101L PHY */
- #define MII_AC101L_ID 0x00225520
-
-+/* Micrel KSZ8041 PHY */
-+#define MII_KSZ8041_ID 0x00221510
-+
- /* Micrel KS8721 PHY */
- #define MII_KS8721_ID 0x00221610
-
-@@ -84,7 +87,6 @@ struct recv_desc_bufs
-
- struct at91_private
- {
-- struct net_device_stats stats;
- struct mii_if_info mii; /* ethtool support */
- struct at91_eth_data board_data; /* board-specific configuration */
- struct clk *ether_clk; /* clock */
---- /dev/null
-+++ b/drivers/net/arm/ks8695_ether.c
-@@ -0,0 +1,1009 @@
-+/*
-+ * Ethernet driver for the Kendin/Micrel KS8695.
-+ *
-+ * Copyright (C) 2006 Andrew Victor
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/mii.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/delay.h>
-+#include <linux/ethtool.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/io.h>
-+#include <asm/mach/irq.h>
-+#include <asm/uaccess.h>
-+#include <asm/arch/regs-wan.h>
-+#include <asm/arch/regs-lan.h>
-+#include <asm/arch/regs-hpna.h>
-+#include <asm/arch/regs-switch.h>
-+#include <asm/arch/regs-misc.h>
-+
-+#include <asm/arch/regs-irq.h>
-+
-+#include "ks8695_ether.h"
-+
-+
-+#define DRV_NAME "ks8695_ether"
-+#define DRV_VERSION "0.01"
-+
-+/* ..................................................................... */
-+
-+static inline unsigned long ks8695_read(struct net_device *dev, unsigned int reg)
-+{
-+ return __raw_readl(dev->base_addr + reg);
-+}
-+
-+static inline void ks8695_write(struct net_device *dev, unsigned int reg, unsigned long value)
-+{
-+ __raw_writel(value, dev->base_addr + reg);
-+}
-+
-+
-+/* ......................... ADDRESS MANAGEMENT ........................ */
-+
-+#define KS8695_NR_ADDRESSES 16
-+
-+/*
-+ * Add the specified multicast addresses to the Additional Station
-+ * Address registers.
-+ */
-+static void ks8695_set_mcast_address(struct net_device *dev, struct dev_mc_list *addr, int nr_addr)
-+{
-+ unsigned long low, high;
-+ int i;
-+
-+ /* Set multicast addresses in Additional Station Address registers */
-+ for (i = 0; i < nr_addr; i++, addr = addr->next) {
-+ if (!addr) break; /* unexpected end of list */
-+ else if (i == KS8695_NR_ADDRESSES) break; /* too many addresses */
-+
-+ low = (addr->dmi_addr[2] << 24) | (addr->dmi_addr[3] << 16) | (addr->dmi_addr[4] << 8) | (addr->dmi_addr[5]);
-+ high = (addr->dmi_addr[0] << 8) | (addr->dmi_addr[1]);
-+
-+ ks8695_write(dev, KS8695_WMAAL_(i), low);
-+ ks8695_write(dev, KS8695_WMAAH_(i), WMAAH_E | high);
-+ }
-+
-+ /* Clear the remaining Additional Station Addresses */
-+ for (; i < KS8695_NR_ADDRESSES; i++) {
-+ ks8695_write(dev, KS8695_WMAAL_(i), 0);
-+ ks8695_write(dev, KS8695_WMAAH_(i), 0);
-+ }
-+}
-+
-+/*
-+ * Enable/Disable promiscuous and multicast modes.
-+ */
-+static void ks8695eth_set_multi(struct net_device *dev)
-+{
-+ unsigned long ctrl;
-+
-+ ctrl = ks8695_read(dev, KS8695_WMDRXC);
-+
-+ if (dev->flags & IFF_PROMISC) /* enable promiscuous mode */
-+ ctrl |= WMDRXC_WMRA;
-+ else if (dev->flags & ~IFF_PROMISC) /* disable promiscuous mode */
-+ ctrl &= ~WMDRXC_WMRA;
-+
-+ if (dev->flags & IFF_ALLMULTI) /* enable all multicast mode */
-+ ctrl |= WMDRXC_WMRM;
-+ else if (dev->mc_count > KS8695_NR_ADDRESSES) /* more specific multicast addresses than can be handled in hardware */
-+ ctrl |= WMDRXC_WMRM;
-+ else if (dev->mc_count > 0) { /* enable specific multicasts */
-+ ctrl &= ~WMDRXC_WMRM;
-+ ks8695_set_mcast_address(dev, dev->mc_list, dev->mc_count);
-+ }
-+ else if (dev->flags & ~IFF_ALLMULTI) { /* disable multicast mode */
-+ ctrl &= ~WMDRXC_WMRM;
-+ ks8695_set_mcast_address(dev, NULL, 0);
-+ }
-+
-+ ks8695_write(dev, KS8695_WMDRXC, ctrl);
-+}
-+
-+/*
-+ * Program the hardware MAC address from dev->dev_addr.
-+ */
-+static void update_mac_address(struct net_device *dev)
-+{
-+ unsigned long low, high;
-+
-+ low = (dev->dev_addr[2] << 24) | (dev->dev_addr[3] << 16) | (dev->dev_addr[4] << 8) | (dev->dev_addr[5]);
-+ high = (dev->dev_addr[0] << 8) | (dev->dev_addr[1]);
-+
-+ ks8695_write(dev, KS8695_WMAL, low);
-+ ks8695_write(dev, KS8695_WMAH, high);
-+}
-+
-+/*
-+ * Store the new hardware address in dev->dev_addr, and update the MAC.
-+ */
-+static int ks8695eth_set_mac(struct net_device *dev, void* addr)
-+{
-+ struct sockaddr *address = addr;
-+ DECLARE_MAC_BUF(mac);
-+
-+ if (!is_valid_ether_addr(address->sa_data))
-+ return -EADDRNOTAVAIL;
-+
-+ memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
-+ update_mac_address(dev);
-+
-+ printk("%s: Setting MAC address to %s\n", dev->name, print_mac(mac, dev->dev_addr));
-+
-+ return 0;
-+}
-+
-+/*
-+ * Retrieve the MAC address set by the bootloader.
-+ */
-+static void __init get_mac_address(struct net_device *dev)
-+{
-+ unsigned char addr[6];
-+ unsigned long low, high;
-+
-+ low = ks8695_read(dev, KS8695_WMAL);
-+ high = ks8695_read(dev, KS8695_WMAH);
-+
-+ addr[0] = (high & 0xff00) >> 8;
-+ addr[1] = (high & 0xff);
-+ addr[2] = (low & 0xff000000) >> 24;
-+ addr[3] = (low & 0xff0000) >> 16;
-+ addr[4] = (low & 0xff00) >> 8;
-+ addr[5] = (low & 0xff);
-+
-+ if (is_valid_ether_addr(addr))
-+ memcpy(dev->dev_addr, &addr, 6);
-+}
-+
-+
-+/* ......................... ETHTOOL SUPPORT ........................... */
-+
-+/*
-+ * Get device-specific settings.
-+ */
-+static int ks8695eth_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-+{
-+ unsigned long ctrl;
-+
-+ /* the defaults for all ports */
-+ cmd->supported = SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full
-+ | SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full
-+ | SUPPORTED_TP | SUPPORTED_MII;
-+ cmd->advertising = ADVERTISED_TP | ADVERTISED_MII;
-+ cmd->port = PORT_MII;
-+ cmd->transceiver = XCVR_INTERNAL;
-+
-+ if (dev->base_addr == KS8695_HPNA_VA) {
-+ cmd->phy_address = 0;
-+ cmd->autoneg = AUTONEG_DISABLE; /* not supported for HPNA */
-+
-+ ctrl = __raw_readl(KS8695_MISC_VA + KS8695_HMC);
-+ cmd->speed = (ctrl & HMC_HSS) ? SPEED_100 : SPEED_10;
-+ cmd->duplex = (ctrl & HMC_HDS) ? DUPLEX_FULL : DUPLEX_HALF;
-+ }
-+ else if (dev->base_addr == KS8695_WAN_VA) {
-+ cmd->supported |= (SUPPORTED_Autoneg | SUPPORTED_Pause);
-+ cmd->phy_address = 0;
-+
-+ ctrl = __raw_readl(KS8695_MISC_VA + KS8695_WMC);
-+ if ((ctrl & WMC_WAND) == 0) { /* auto-negotiation is enabled */
-+ cmd->advertising |= ADVERTISED_Autoneg;
-+ if (ctrl & WMC_WANA100F)
-+ cmd->advertising |= ADVERTISED_100baseT_Full;
-+ if (ctrl & WMC_WANA100H)
-+ cmd->advertising |= ADVERTISED_100baseT_Half;
-+ if (ctrl & WMC_WANA10F)
-+ cmd->advertising |= ADVERTISED_10baseT_Full;
-+ if (ctrl & WMC_WANA10H)
-+ cmd->advertising |= ADVERTISED_10baseT_Half;
-+ if (ctrl & WMC_WANAP)
-+ cmd->advertising |= ADVERTISED_Pause;
-+ cmd->autoneg = AUTONEG_ENABLE;
-+
-+ cmd->speed = (ctrl & WMC_WSS) ? SPEED_100 : SPEED_10;
-+ cmd->duplex = (ctrl & WMC_WDS) ? DUPLEX_FULL : DUPLEX_HALF;
-+ }
-+ else { /* auto-negotiation is disabled */
-+ cmd->autoneg = AUTONEG_DISABLE;
-+
-+ cmd->speed = (ctrl & WMC_WANF100) ? SPEED_100 : SPEED_10;
-+ cmd->duplex = (ctrl & WMC_WANFF) ? DUPLEX_FULL : DUPLEX_HALF;
-+ }
-+ }
-+ else if (dev->base_addr == KS8695_LAN_VA) {
-+ // TODO: Implement for Switch ports
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * Set device-specific settings.
-+ */
-+static int ks8695eth_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-+{
-+ unsigned long ctrl;
-+
-+ if ((cmd->speed != SPEED_10) && (cmd->speed != SPEED_100))
-+ return -EINVAL;
-+ if ((cmd->duplex != DUPLEX_HALF) && (cmd->duplex != DUPLEX_FULL))
-+ return -EINVAL;
-+ if (cmd->port != PORT_MII)
-+ return -EINVAL;
-+ if (cmd->transceiver != XCVR_INTERNAL)
-+ return -EINVAL;
-+ if ((cmd->autoneg != AUTONEG_DISABLE) && (cmd->autoneg != AUTONEG_ENABLE))
-+ return -EINVAL;
-+
-+ if (cmd->autoneg == AUTONEG_ENABLE) {
-+ if ((cmd->advertising & (ADVERTISED_10baseT_Half |
-+ ADVERTISED_10baseT_Full |
-+ ADVERTISED_100baseT_Half |
-+ ADVERTISED_100baseT_Full)) == 0)
-+ return -EINVAL;
-+
-+ if (dev->base_addr == KS8695_HPNA_VA)
-+ return -EINVAL; /* HPNA does not support auto-negotiation. */
-+ else if (dev->base_addr == KS8695_WAN_VA) {
-+ ctrl = __raw_readl(KS8695_MISC_VA + KS8695_WMC);
-+
-+ ctrl &= ~(WMC_WAND | WMC_WANA100F | WMC_WANA100H | WMC_WANA10F | WMC_WANA10H);
-+ if (cmd->advertising & ADVERTISED_100baseT_Full)
-+ ctrl |= WMC_WANA100F;
-+ if (cmd->advertising & ADVERTISED_100baseT_Half)
-+ ctrl |= WMC_WANA100H;
-+ if (cmd->advertising & ADVERTISED_10baseT_Full)
-+ ctrl |= WMC_WANA10F;
-+ if (cmd->advertising & ADVERTISED_10baseT_Half)
-+ ctrl |= WMC_WANA10H;
-+
-+ ctrl |= WMC_WANR; /* force a re-negotiation */
-+ __raw_writel(ctrl, KS8695_MISC_VA + KS8695_WMC);
-+ }
-+ else if (dev->base_addr == KS8695_LAN_VA) {
-+ // TODO: Implement for Switch ports
-+ }
-+
-+ }
-+ else {
-+ if (dev->base_addr == KS8695_HPNA_VA) {
-+ ctrl = __raw_readl(KS8695_MISC_VA + KS8695_HMC);
-+
-+ ctrl &= ~(HMC_HSS | HMC_HDS);
-+ if (cmd->speed == SPEED_100)
-+ ctrl |= HMC_HSS;
-+ if (cmd->duplex == DUPLEX_FULL)
-+ ctrl |= HMC_HDS;
-+
-+ __raw_writel(ctrl, KS8695_MISC_VA + KS8695_HMC);
-+ }
-+ else if (dev->base_addr == KS8695_WAN_VA) {
-+ ctrl = __raw_readl(KS8695_MISC_VA + KS8695_WMC);
-+
-+ ctrl |= WMC_WAND; /* disable auto-negotiation */
-+ ctrl &= ~(WMC_WANF100 | WMC_WANFF);
-+ if (cmd->speed == SPEED_100)
-+ ctrl |= WMC_WANF100;
-+ if (cmd->duplex == DUPLEX_FULL)
-+ ctrl |= WMC_WANFF;
-+
-+ __raw_writel(ctrl, KS8695_MISC_VA + KS8695_WMC);
-+ }
-+ else if (dev->base_addr == KS8695_LAN_VA) {
-+ // TODO: Implement for Switch ports
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * Restart the auto-negotiation.
-+ */
-+static int ks8695eth_nwayreset(struct net_device *dev)
-+{
-+ unsigned long ctrl;
-+
-+ if (dev->base_addr == KS8695_HPNA_VA) /* HPNA has no auto-negotiation */
-+ return -EINVAL;
-+ else if (dev->base_addr == KS8695_WAN_VA) {
-+ ctrl = __raw_readl(KS8695_MISC_VA + KS8695_WMC);
-+
-+ if ((ctrl & WMC_WAND) == 0)
-+ __raw_writel(ctrl | WMC_WANR, KS8695_MISC_VA + KS8695_WMC);
-+ else
-+ return -EINVAL; /* auto-negitiation not enabled */
-+ }
-+ else if (dev->base_addr == KS8695_LAN_VA) {
-+ // TODO: Implement for Switch ports
-+ }
-+
-+ return 0;
-+}
-+
-+static void ks8695eth_get_pause(struct net_device *dev, struct ethtool_pauseparam *param)
-+{
-+ unsigned long ctrl;
-+
-+ if (dev->base_addr == KS8695_HPNA_VA)
-+ return;
-+ else if (dev->base_addr == KS8695_WAN_VA) {
-+ ctrl = __raw_readl(KS8695_MISC_VA + KS8695_WMC); /* advertise Pause */
-+ param->autoneg = (ctrl & WMC_WANAP);
-+
-+ ctrl = ks8695_read(dev, KS8695_WMDRXC); /* current Tx Flow-control */
-+ param->rx_pause = (ctrl & WMDRXC_WMRFCE);
-+
-+ ctrl = ks8695_read(dev, KS8695_WMDRXC); /* current Rx Flow-control */
-+ param->tx_pause = (ctrl & WMDTXC_WMTFCE);
-+ }
-+ else if (dev->base_addr == KS8695_LAN_VA) {
-+ // TODO: Implement for Switch ports
-+ }
-+}
-+
-+static int ks8695eth_set_pause(struct net_device *dev, struct ethtool_pauseparam *param)
-+{
-+ // TODO.
-+
-+ return 0;
-+}
-+
-+static u32 ks8695eth_get_link(struct net_device *dev)
-+{
-+ unsigned long ctrl;
-+
-+ if (dev->base_addr == KS8695_HPNA_VA)
-+ return 1; /* HPNA always has link */
-+ else if (dev->base_addr == KS8695_WAN_VA) {
-+ ctrl = __raw_readl(KS8695_MISC_VA + KS8695_WMC);
-+ return (ctrl & WMC_WLS);
-+ }
-+ else if (dev->base_addr == KS8695_LAN_VA) {
-+ // TODO: Implement for Switch ports
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * Report driver information.
-+ */
-+static void ks8695eth_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
-+{
-+ strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
-+ strlcpy(info->version, DRV_VERSION, sizeof(info->version));
-+ strlcpy(info->bus_info, dev->dev.parent->bus_id, sizeof(info->bus_info));
-+}
-+
-+static struct ethtool_ops ks8695eth_ethtool_ops = {
-+ .get_settings = ks8695eth_get_settings,
-+ .set_settings = ks8695eth_set_settings,
-+ .get_drvinfo = ks8695eth_get_drvinfo,
-+ .nway_reset = ks8695eth_nwayreset,
-+ .get_pauseparam = ks8695eth_get_pause,
-+ .set_pauseparam = ks8695eth_set_pause,
-+ .get_link = ks8695eth_get_link,
-+};
-+
-+
-+/* ................................ MAC ................................ */
-+
-+/*
-+ * Setup the RX DMA descriptors, and enable and start the DMA receiver.
-+ */
-+static void ks8695eth_start_rx(struct net_device *dev)
-+{
-+ struct ks8695eth_priv *lp = (struct ks8695eth_priv *) dev->priv;
-+ unsigned long ctrl;
-+ int i;
-+
-+ /* Setup the DMA descriptors */
-+ for (i = 0; i < MAX_RX_DESC; i++) {
-+ lp->rxdma[i].length = MAX_RXBUF_SIZE;
-+ lp->rxdma[i].addr = (unsigned long) lp->rxSkb[i].dma;
-+ lp->rxdma[i].next = (unsigned long) lp->rxdma_phys + (sizeof(struct rx_descriptor) * (i+1));
-+ lp->rxdma[i].status = RDES_OWN;
-+ }
-+
-+ /* Create ring of DMA descriptors */
-+ lp->rxdma[MAX_RX_DESC-1].next = (unsigned long) lp->rxdma_phys; /* phys address of 1st descriptor */
-+
-+ /* Reset receive index (since hardware was reset) */
-+ lp->rx_idx = 0;
-+
-+ /* Program address of 1st descriptor in KS8695 */
-+ ks8695_write(dev, KS8695_WRDLB, (unsigned long) lp->rxdma_phys);
-+
-+ /* Enable and start the DMA Receiver */
-+ ctrl = ks8695_read(dev, KS8695_WMDRXC);
-+ ks8695_write(dev, KS8695_WMDRXC, ctrl | WMDRXC_WMRE);
-+ ks8695_write(dev, KS8695_WMDRSC, 0);
-+}
-+
-+/*
-+ * Stop the DMA receiver.
-+ */
-+static void ks8695eth_stop_rx(struct net_device *dev)
-+{
-+ unsigned long ctrl;
-+
-+ /* Disable receive DMA */
-+ ctrl = ks8695_read(dev, KS8695_WMDRXC);
-+ ks8695_write(dev, KS8695_WMDRXC, ctrl & ~WMDRXC_WMRE);
-+}
-+
-+/*
-+ * Setup the TX DMA descriptors, and enable DMA transmitter.
-+ */
-+static void ks8695eth_start_tx(struct net_device *dev)
-+{
-+ struct ks8695eth_priv *lp = (struct ks8695eth_priv *) dev->priv;
-+ unsigned long ctrl;
-+ int i;
-+
-+ /* Setup the DMA descriptors */
-+ for (i = 0; i < MAX_TX_DESC; i++) {
-+ lp->txdma[i].ownership = 0;
-+ lp->txdma[i].status = 0;
-+ lp->txdma[i].addr = 0;
-+ lp->txdma[i].next = (unsigned long) lp->txdma_phys + (sizeof(struct tx_descriptor) * (i+1));
-+ }
-+
-+ /* Create ring of DMA descriptors */
-+ lp->txdma[MAX_TX_DESC-1].next = (unsigned long) lp->txdma_phys; /* phys address of 1st desc */
-+
-+ /* Reset transmit indexes (since hardware was reset) */
-+ lp->tx_head = 0;
-+ lp->tx_tail = 0;
-+
-+ /* Program address of 1st descriptor in KS8695 */
-+ ks8695_write(dev, KS8695_WTDLB, (unsigned long) lp->txdma_phys);
-+
-+ /* Enable the DMA transmitter (will be started on first packet) */
-+ ctrl = ks8695_read(dev, KS8695_WMDTXC);
-+ ks8695_write(dev, KS8695_WMDTXC, ctrl | WMDTXC_WMTE);
-+}
-+
-+/*
-+ * Stop the DMA transmitter.
-+ */
-+static void ks8695eth_stop_tx(struct net_device *dev)
-+{
-+ struct ks8695eth_priv *lp = (struct ks8695eth_priv *) dev->priv;
-+ unsigned long ctrl;
-+ int i;
-+
-+ /* Disable transmit DMA */
-+ ctrl = ks8695_read(dev, KS8695_WMDTXC);
-+ ks8695_write(dev, KS8695_WMDTXC, ctrl & ~WMDTXC_WMTE);
-+
-+ /* Clear any pending skb's still on transmit queue */
-+ for (i = 0; i < MAX_TX_DESC; i++) {
-+ lp->txdma[i].ownership = 0;
-+ lp->txdma[i].status = 0;
-+ lp->txdma[i].addr = 0;
-+
-+ if (lp->txSkb[i].skb) {
-+ dma_unmap_single(lp->dev, lp->txSkb[i].dma, lp->txSkb[i].length, DMA_TO_DEVICE);
-+ dev_kfree_skb_irq(lp->txSkb[i].skb);
-+ lp->txSkb[i].skb = NULL;
-+ }
-+ }
-+}
-+
-+/*
-+ * Reset the MAC hardware.
-+ */
-+static void ks8695eth_hw_reset(struct net_device *dev)
-+{
-+ /* Perform hardware reset */
-+ ks8695_write(dev, KS8695_WMDTXC, WMDTXC_WMTRST);
-+ while (ks8695_read(dev, KS8695_WMDTXC) & WMDTXC_WMTRST) { barrier(); }
-+
-+ /* Initialize the hardware */
-+ ks8695_write(dev, KS8695_WMDRXC, WMDRXC_WMRU | WMDRXC_WMRB); /* RX: receive Unicast & Broadcast */
-+ ks8695_write(dev, KS8695_WMDTXC, WMDTXC_WMTEP | WMDTXC_WMTAC); /* TX: add Padding & CRC */
-+
-+ // TODO: Can set Rx/Tx PBL: (Micrel using 8)
-+ // TODO: Enable hardware checksumming.
-+ // TODO: Enable Rx/Tx flow-control
-+}
-+
-+/*
-+ * Enable or Disable the IRQs associated with a network interface.
-+ */
-+static void ks8695eth_set_irq(struct net_device *dev, short enable)
-+{
-+ struct ks8695eth_priv *lp = (struct ks8695eth_priv *) dev->priv;
-+ int i;
-+
-+ for (i = 0; i < NR_IRQS; i++) {
-+ if (lp->irqs & (1 << i)) {
-+ if (enable)
-+ enable_irq(i);
-+ else
-+ disable_irq(i);
-+ }
-+ }
-+}
-+
-+/*
-+ * Open the ethernet interface.
-+ */
-+static int ks8695eth_open(struct net_device *dev)
-+{
-+ if (!is_valid_ether_addr(dev->dev_addr))
-+ return -EADDRNOTAVAIL;
-+
-+ /* MUST reset hardware in _open() */
-+ ks8695eth_hw_reset(dev);
-+
-+ /* Update the MAC address (incase user has changed it) */
-+ update_mac_address(dev);
-+
-+ /* Start DMA */
-+ ks8695eth_start_tx(dev);
-+ ks8695eth_start_rx(dev);
-+
-+ /* Enable interrupts */
-+ ks8695eth_set_irq(dev, 1);
-+
-+ netif_start_queue(dev);
-+ return 0;
-+}
-+
-+/*
-+ * Close the ethernet interface.
-+ */
-+static int ks8695eth_close(struct net_device *dev)
-+{
-+ /* Stop DMA */
-+ ks8695eth_stop_rx(dev);
-+ ks8695eth_stop_tx(dev);
-+
-+ /* Disable interrupts */
-+ ks8695eth_set_irq(dev, 0);
-+
-+ netif_stop_queue(dev);
-+ return 0;
-+}
-+
-+/*
-+ * Return the current statistics.
-+ */
-+static struct net_device_stats *ks8695eth_stats(struct net_device *dev)
-+{
-+ return &dev->stats;
-+}
-+
-+/*
-+ * Queue a packet for transmission in next TX DMA descriptor.
-+ */
-+static int ks8695eth_xmit_frame(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct ks8695eth_priv *lp = (struct ks8695eth_priv *) dev->priv;
-+ int i;
-+
-+ /* Packets are added to head of array */
-+ i = lp->tx_head;
-+
-+ /* Store packet information */
-+ lp->txSkb[i].skb = skb;
-+ lp->txSkb[i].length = skb->len;
-+ lp->txSkb[i].dma = dma_map_single(lp->dev, skb->data, skb->len, DMA_TO_DEVICE);
-+
-+ spin_lock_irq(&lp->tx_lock);
-+
-+ /* Set Tx descriptor information */
-+ lp->txdma[i].addr = lp->txSkb[i].dma;
-+ lp->txdma[i].status = TDES_IC | TDES_FS | TDES_LS | (lp->txSkb[i].length & TDES_TBS);
-+ lp->txdma[i].ownership = TDES_OWN;
-+
-+ /* Start the DMA transmitter (if necessary) */
-+ ks8695_write(dev, KS8695_WMDTSC, 0);
-+
-+ lp->tx_head = (lp->tx_head + 1) % MAX_TX_DESC;
-+ if (lp->tx_head == lp->tx_tail) /* no more descriptors */
-+ netif_stop_queue(dev);
-+
-+ spin_unlock_irq(&lp->tx_lock);
-+
-+ dev->trans_start = jiffies;
-+ return 0;
-+}
-+
-+/* ..................................................................... */
-+
-+/*
-+ * The link state of the WAN port has changed.
-+ * (Called from interrupt context)
-+ */
-+static void ks8695eth_wan_link(struct net_device *dev)
-+{
-+ unsigned long ctrl;
-+
-+ ctrl = __raw_readl(KS8695_MISC_VA + KS8695_WMC);
-+ if (ctrl & WMC_WLS) {
-+ netif_carrier_on(dev);
-+ printk(KERN_INFO "%s: Link is now %s-%s\n", dev->name,
-+ (ctrl & WMC_WSS) ? "100" : "10",
-+ (ctrl & WMC_WDS) ? "FullDuplex" : "HalfDuplex");
-+ }
-+ else {
-+ netif_carrier_off(dev);
-+ printk(KERN_INFO "%s: Link down.\n", dev->name);
-+ }
-+}
-+
-+/* ..................................................................... */
-+
-+/*
-+ * A frame has been received. Exteract from buffer descriptor and deliver to
-+ * upper layers.
-+ * (Called from interrupt context)
-+ */
-+static void ks8695eth_rx_interrupt(struct net_device *dev)
-+{
-+ struct ks8695eth_priv *lp = (struct ks8695eth_priv *) dev->priv;
-+ struct sk_buff *skb;
-+ unsigned long flags;
-+ unsigned int pktlen;
-+
-+ while (!(lp->rxdma[lp->rx_idx].status & RDES_OWN)) {
-+ flags = lp->rxdma[lp->rx_idx].status;
-+
-+ if ((flags & (RDES_FS | RDES_LS)) != (RDES_FS | RDES_LS)) {
-+ printk(KERN_ERR "%s: Spanning packet detected\n", dev->name);
-+ goto rx_complete;
-+ }
-+
-+ /* handle errors */
-+ if (flags & (RDES_ES | RDES_RE)) {
-+ dev->stats.rx_errors++;
-+
-+ if (flags & RDES_TL) /* Frame too long */
-+ dev->stats.rx_length_errors++;
-+ else if (flags & RDES_RF) /* Runt frame */
-+ dev->stats.rx_length_errors++;
-+ else if (flags & RDES_CE) /* CRC error */
-+ dev->stats.rx_crc_errors++;
-+ else if (flags & RDES_RE) /* MII error */
-+ dev->stats.rx_missed_errors++;
-+ // TODO: If hardware checksumming, then check IP/TCP/UDP errors.
-+
-+ goto rx_complete;
-+ }
-+
-+ pktlen = flags & RDES_FLEN;
-+ pktlen = pktlen - 4; /* remove CRC */
-+
-+ // OLD CALL: consistent_sync(lp->rxSkb[lp->rx_idx].skb->data, MAX_RXBUF_SIZE, DMA_FROM_DEVICE);
-+ dma_sync_single_for_cpu(lp->dev, lp->rxSkb[lp->rx_idx].dma, MAX_RXBUF_SIZE, DMA_FROM_DEVICE);
-+
-+ skb = dev_alloc_skb(pktlen+2); /* +2 to align IP header */
-+ if (!skb) {
-+ dev->stats.rx_dropped++;
-+ printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
-+ goto rx_complete;
-+ }
-+
-+ skb_reserve(skb, 2); /* align IP header */
-+ memcpy(skb_put(skb, pktlen), lp->rxSkb[lp->rx_idx].skb->data, pktlen);
-+
-+ skb->protocol = eth_type_trans(skb, dev);
-+ netif_rx(skb);
-+
-+ /* update statistics */
-+ dev->stats.rx_packets++;
-+ dev->stats.rx_bytes += pktlen;
-+ if (flags & RDES_MF)
-+ dev->stats.multicast++;
-+ dev->last_rx = jiffies;
-+
-+rx_complete:
-+ lp->rxdma[lp->rx_idx].status = RDES_OWN; /* reset ownership bit */
-+
-+ lp->rx_idx = (lp->rx_idx + 1) % MAX_RX_DESC; /* next descriptor */
-+ }
-+
-+ /* restart DMA receiver incase it was suspended */
-+ ks8695_write(dev, KS8695_WMDRSC, 0);
-+}
-+
-+/*
-+ * A packet has been transmitted.
-+ * (Called from interrupt context)
-+ */
-+static void ks8695eth_tx_interrupt(struct net_device *dev)
-+{
-+ struct ks8695eth_priv *lp = (struct ks8695eth_priv *) dev->priv;
-+ int i;
-+
-+ /* Packets are removed from tail of array */
-+ i = lp->tx_tail;
-+
-+ // TODO: Loop through multiple times?
-+
-+ if (lp->txSkb[i].skb) {
-+ /* update statistics */
-+ dev->stats.tx_packets++;
-+ dev->stats.tx_bytes += lp->txSkb[i].length;
-+
-+ /* free packet */
-+ dma_unmap_single(lp->dev, lp->txSkb[i].dma, lp->txSkb[i].length, DMA_TO_DEVICE);
-+ dev_kfree_skb_irq(lp->txSkb[i].skb);
-+ lp->txSkb[i].skb = NULL;
-+
-+ /* Not necessary to clear descriptor since we still own it */
-+ }
-+
-+ lp->tx_tail = (lp->tx_tail + 1) % MAX_TX_DESC;
-+
-+ netif_wake_queue(dev);
-+}
-+
-+/*
-+ * MAC interrupt handler
-+ */
-+static irqreturn_t ks8695eth_interrupt(int irq, void *dev_id)
-+{
-+ struct net_device *dev = (struct net_device *) dev_id;
-+
-+ switch (irq) {
-+ case KS8695_IRQ_LAN_RX_STATUS:
-+ case KS8695_IRQ_HPNA_RX_STATUS:
-+ case KS8695_IRQ_WAN_RX_STATUS:
-+ ks8695eth_rx_interrupt(dev);
-+ return IRQ_HANDLED;
-+
-+ case KS8695_IRQ_LAN_TX_STATUS:
-+ case KS8695_IRQ_HPNA_TX_STATUS:
-+ case KS8695_IRQ_WAN_TX_STATUS:
-+ ks8695eth_tx_interrupt(dev);
-+ return IRQ_HANDLED;
-+
-+ case KS8695_IRQ_WAN_LINK:
-+ ks8695eth_wan_link(dev);
-+ return IRQ_HANDLED;
-+
-+ default:
-+ return IRQ_NONE;
-+ }
-+}
-+
-+
-+/* ..................................................................... */
-+
-+/*
-+ * Initialize the WAN hardware to known defaults.
-+ */
-+static void __init ks8695eth_init_wan(void)
-+{
-+ unsigned long ctrl;
-+
-+ /* Support auto-negotiation */
-+ ctrl = WMC_WANAP | WMC_WANA100F | WMC_WANA100H | WMC_WANA10F | WMC_WANA10H;
-+
-+ /* LED0 = Activity , LED1 = Link */
-+ ctrl |= (WLED0S_ACTIVITY | WLED1S_LINK);
-+
-+ /* Restart Auto-negotiation */
-+ ctrl |= WMC_WANR;
-+
-+ __raw_writel(ctrl, KS8695_MISC_VA + KS8695_WMC);
-+
-+ __raw_writel(0, KS8695_MISC_VA + KS8695_WPPM);
-+ __raw_writel(0, KS8695_MISC_VA + KS8695_PPS);
-+}
-+
-+/*
-+ * Initialize the LAN Switch hardware to known defaults.
-+ */
-+static void __init ks8695eth_init_switch(void)
-+{
-+ unsigned long ctrl;
-+
-+ ctrl = 0x40819e00; /* default */
-+
-+ /* LED0 = Speed LED1 = Link/Activity */
-+ ctrl &= ~(SEC0_LLED1S | SEC0_LLED0S);
-+ ctrl |= (LLED0S_LINK | LLED1S_LINK_ACTIVITY);
-+
-+ /* Enable Switch */
-+ ctrl |= SEC0_ENABLE;
-+
-+ __raw_writel(ctrl, KS8695_SWITCH_VA + KS8695_SEC0);
-+
-+ __raw_writel(0x9400100, KS8695_SWITCH_VA + KS8695_SEC1); /* reset defaults */
-+}
-+
-+static int ks8695eth_hook_irqs(struct platform_device *pdev, struct net_device *dev, unsigned long *irqset)
-+{
-+ struct resource *res;
-+ int i = 0, ret;
-+
-+ while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, i))) {
-+ set_irq_flags(res->start, IRQF_VALID | IRQF_NOAUTOEN);
-+
-+ ret = request_irq(res->start, ks8695eth_interrupt, IRQF_DISABLED | IRQF_SHARED, res->name, dev);
-+ if (ret) {
-+ printk(KERN_ERR "%s: return_irq %u failed\n", dev->name, res->start);
-+ return -EBUSY;
-+ }
-+
-+ *irqset |= (1 << res->start);
-+
-+ // TODO: Can set different priorities for interrupts [0x BB AA FF].
-+
-+ i++;
-+ }
-+
-+ return 0;
-+}
-+
-+static int __init ks8695eth_probe(struct platform_device *pdev)
-+{
-+ struct net_device *dev;
-+ struct ks8695eth_priv *lp;
-+ struct resource *res;
-+ int i = 0, ret, size;
-+ DECLARE_MAC_BUF(mac);
-+
-+ /* Create ethernet device */
-+ dev = alloc_etherdev(sizeof(struct ks8695eth_priv));
-+ if (!dev)
-+ return -ENOMEM;
-+
-+ /* Get I/O base address */
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res) {
-+ free_netdev(dev);
-+ return -ENODEV;
-+ }
-+ dev->base_addr = res->start;
-+
-+ lp = (struct ks8695eth_priv *) dev->priv;
-+
-+ /* Retreive MAC address before the MAC registers are reset */
-+ get_mac_address(dev);
-+
-+ /* Reset the hardware */
-+ ks8695_write(dev, KS8695_WMDTXC, WMDTXC_WMTRST);
-+ while (ks8695_read(dev, KS8695_WMDTXC) & WMDTXC_WMTRST) { barrier(); }
-+
-+ /* Get IRQ's */
-+ dev->irq = platform_get_irq(pdev, 0);
-+ ret = ks8695eth_hook_irqs(pdev, dev, &lp->irqs);
-+ if (ret) {
-+ // Cleanup.
-+ }
-+
-+ /* Allocate DMA-able memory for Tx descriptor */
-+ size = sizeof(struct tx_descriptor) * MAX_TX_DESC;
-+ lp->txdma = dma_alloc_coherent(&pdev->dev, size, &lp->txdma_phys, GFP_KERNEL);
-+ if (lp->txdma == NULL) {
-+ // free IRQs
-+ free_netdev(dev);
-+ return -ENOMEM;
-+ }
-+ memset(lp->txdma, 0, size);
-+ lp->tx_head = 0;
-+ lp->tx_tail = 0;
-+
-+ /* Allocate DMA-able memory for Rx descriptor */
-+ size = sizeof(struct rx_descriptor) * MAX_RX_DESC;
-+ lp->rxdma = dma_alloc_coherent(&pdev->dev, size, &lp->rxdma_phys, GFP_KERNEL);
-+ if (lp->rxdma == NULL) {
-+ // free IRQs
-+ // Free TX descriptor memory.
-+ free_netdev(dev);
-+ return -ENOMEM;
-+ }
-+ memset(lp->rxdma, 0, size);
-+ lp->rx_idx = 0;
-+
-+ /* Allocate DMA-able memory for Rx Data */
-+ for (i = 0; i < MAX_RX_DESC; i++) {
-+ lp->rxSkb[i].skb = alloc_skb(MAX_RXBUF_SIZE, GFP_KERNEL);
-+ if (lp->rxSkb[i].skb == NULL) {
-+ // Cleanup
-+ return -ENOMEM;
-+ }
-+ lp->rxSkb[i].length = MAX_RXBUF_SIZE;
-+ lp->rxSkb[i].dma = dma_map_single(&pdev->dev, lp->rxSkb[i].skb->data, MAX_RXBUF_SIZE, DMA_FROM_DEVICE);
-+ }
-+
-+ spin_lock_init(&lp->tx_lock);
-+
-+ platform_set_drvdata(pdev, dev);
-+
-+ ether_setup(dev);
-+ dev->open = ks8695eth_open;
-+ dev->stop = ks8695eth_close;
-+ dev->hard_start_xmit = ks8695eth_xmit_frame;
-+ dev->get_stats = ks8695eth_stats;
-+ dev->set_multicast_list = ks8695eth_set_multi;
-+ dev->set_mac_address = ks8695eth_set_mac;
-+ dev->ethtool_ops = &ks8695eth_ethtool_ops;
-+
-+ SET_NETDEV_DEV(dev, &pdev->dev);
-+ lp->dev = &pdev->dev;
-+
-+ if (dev->base_addr == KS8695_WAN_VA)
-+ ks8695eth_init_wan();
-+ else if (dev->base_addr == KS8695_LAN_VA)
-+ ks8695eth_init_switch();
-+
-+ /* Register the network interface */
-+ ret = register_netdev(dev);
-+ if (ret) {
-+ // free IRQs
-+ free_netdev(dev);
-+// dma_free_coherent(&pdev->dev, sizeof(struct ks8695_tx_dma), lp->txdma, lp->txdma_phys);
-+// dma_free_coherent(&pdev->dev, sizeof(struct ks8695_rx_dma), lp->rxdma, lp->rxdma_phys);
-+ return ret;
-+ }
-+
-+ printk(KERN_INFO "%s: KS8695 ethernet (%s)\n", dev->name, print_mac(mac, dev->dev_addr));
-+
-+ return 0;
-+}
-+
-+static int __devexit ks8695eth_remove(struct platform_device *pdev)
-+{
-+ struct net_device *dev = platform_get_drvdata(pdev);
-+// struct ks8695eth_priv *lp = (struct ks8695eth_priv *) dev->priv;
-+
-+ unregister_netdev(dev);
-+
-+ // Free IRQ
-+// dma_free_coherent(&pdev->dev, sizeof(struct ks8695_tx_dma), lp->txdma, lp->txdma_phys);
-+// dma_free_coherent(&pdev->dev, sizeof(struct ks8695_rx_dma), lp->rxdma, lp->rxdma_phys);
-+
-+ platform_set_drvdata(pdev, NULL);
-+ free_netdev(dev);
-+ return 0;
-+}
-+
-+static struct platform_driver ks8695ether_driver = {
-+ .probe = ks8695eth_probe,
-+ .remove = __devexit_p(ks8695eth_remove),
-+// .suspend =
-+// .resume =
-+ .driver = {
-+ .name = DRV_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+
-+static int __init ks8695eth_init(void)
-+{
-+ return platform_driver_register(&ks8695ether_driver);
-+}
-+
-+static void __exit ks8695eth_exit(void)
-+{
-+ platform_driver_unregister(&ks8695ether_driver);
-+}
-+
-+module_init(ks8695eth_init);
-+module_exit(ks8695eth_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("KS8695 Ethernet driver");
-+MODULE_AUTHOR("Andrew Victor");
-+MODULE_ALIAS("platform:" DRV_NAME);
---- /dev/null
-+++ b/drivers/net/arm/ks8695_ether.h
-@@ -0,0 +1,92 @@
-+/*
-+ * Ethernet driver for the Micrel/Kendin KS8695 (Centaur)
-+ *
-+ * (C) 2006 Andrew Victor
-+ *
-+ */
-+
-+#ifndef KS8695_ETHERNET
-+#define KS8695_ETHERNET
-+
-+/* .... Hardware Descriptors ................................................ */
-+
-+struct rx_descriptor {
-+ unsigned long status;
-+ unsigned long length;
-+ unsigned long addr;
-+ unsigned long next;
-+};
-+
-+#define RDES_OWN (1 << 31) /* Ownership */
-+#define RDES_FS (1 << 30) /* First Descriptor */
-+#define RDES_LS (1 << 29) /* Last Descriptor */
-+#define RDES_IPE (1 << 28) /* IP Checksum error */
-+#define RDES_TCPE (1 << 27) /* TCP Checksum error */
-+#define RDES_UDPE (1 << 26) /* UDP Checksum error */
-+#define RDES_ES (1 << 25) /* Error summary */
-+#define RDES_MF (1 << 24) /* Multicast Frame */
-+#define RDES_RE (1 << 19) /* MII Error reported */
-+#define RDES_TL (1 << 18) /* Frame too Long */
-+#define RDES_RF (1 << 17) /* Runt Frame */
-+#define RDES_CE (1 << 16) /* CRC error */
-+#define RDES_FT (1 << 15) /* Frame Type */
-+#define RDES_FLEN (0x7ff) /* Frame Length */
-+
-+#define RDES_RER (1 << 25) /* Receive End of Ring */
-+#define RDES_RBS (0x7ff) /* Receive Buffer Size */
-+
-+
-+struct tx_descriptor {
-+ unsigned long ownership;
-+ unsigned long status;
-+ unsigned long addr;
-+ unsigned long next;
-+};
-+
-+#define TDES_OWN (1 << 31) /* Ownership */
-+
-+#define TDES_IC (1 << 31) /* Interrupt on Completion */
-+#define TDES_FS (1 << 30) /* First Segment */
-+#define TDES_LS (1 << 29) /* Last Segment */
-+#define TDES_IPCKG (1 << 28) /* IP Checksum generate */
-+#define TDES_TCPCKG (1 << 27) /* TCP Checksum generate */
-+#define TDES_UDPCKG (1 << 26) /* UDP Checksum generate */
-+#define TDES_TER (1 << 25) /* Transmit End of Ring */
-+#define TDES_TBS (0x7ff) /* Transmit Buffer Size */
-+
-+
-+/* .... ..................................................................... */
-+
-+#define MAX_RX_DESC 16 /* number of receive descriptors */
-+#define MAX_TX_DESC 8 /* number of transmit descriptors */
-+#define MAX_RXBUF_SIZE 0x600 /* 1518 rounded-up */
-+
-+struct ks8695_buffer
-+{
-+ struct sk_buff *skb;
-+ dma_addr_t dma;
-+ unsigned long length;
-+};
-+
-+
-+struct ks8695eth_priv
-+{
-+ struct device *dev;
-+ unsigned long irqs; /* IRQ bitset */
-+
-+ /* Transmit */
-+ struct tx_descriptor *txdma; /* Tx DMA descriptors */
-+ dma_addr_t txdma_phys; /* TX DMA descriptors (phys address) */
-+ unsigned int tx_head; /* descriptor index (add) */
-+ unsigned int tx_tail; /* descriptor index (remove) */
-+ spinlock_t tx_lock;
-+ struct ks8695_buffer txSkb[MAX_TX_DESC]; /* packets being transmitted */
-+
-+ /* Receive */
-+ struct rx_descriptor *rxdma; /* Rx DMA descriptors */
-+ dma_addr_t rxdma_phys; /* Rx DMA descriptors (phys address) */
-+ unsigned int rx_idx; /* descriptor index */
-+ struct ks8695_buffer rxSkb[MAX_RX_DESC];
-+};
-+
-+#endif
---- a/drivers/rtc/Kconfig
-+++ b/drivers/rtc/Kconfig
-@@ -487,12 +487,12 @@ config RTC_DRV_AT91RM9200
- this is powered by the backup power supply.
-
- config RTC_DRV_AT91SAM9
-- tristate "AT91SAM9x"
-+ tristate "AT91SAM9x or AT91CAP9"
- depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40)
- help
-- RTC driver for the Atmel AT91SAM9x internal RTT (Real Time Timer).
-- These timers are powered by the backup power supply (such as a
-- small coin cell battery), but do not need to be used as RTCs.
-+ RTC driver for the Atmel AT91SAM9x and AT91CAP9 internal RTT (Real
-+ Time Timer). These timers are powered by the backup power supply
-+ (such as a small coin cell battery), but do not need to be used as RTCs.
-
- (On AT91SAM9rl chips you probably want to use the dedicated RTC
- module and leave the RTT available for other uses.)
---- a/drivers/rtc/rtc-at91rm9200.c
-+++ b/drivers/rtc/rtc-at91rm9200.c
-@@ -29,9 +29,6 @@
- #include <linux/completion.h>
-
- #include <asm/uaccess.h>
--#include <asm/rtc.h>
--
--#include <asm/mach/time.h>
-
- #include <asm/arch/at91_rtc.h>
-
-@@ -307,12 +304,6 @@ static int __init at91_rtc_probe(struct
- return ret;
- }
-
-- /* cpu init code should really have flagged this device as
-- * being wake-capable; if it didn't, do that here.
-- */
-- if (!device_can_wakeup(&pdev->dev))
-- device_init_wakeup(&pdev->dev, 1);
--
- rtc = rtc_device_register(pdev->name, &pdev->dev,
- &at91_rtc_ops, THIS_MODULE);
- if (IS_ERR(rtc)) {
---- a/drivers/rtc/rtc-at91sam9.c
-+++ b/drivers/rtc/rtc-at91sam9.c
-@@ -21,6 +21,7 @@
-
- #include <asm/mach/time.h>
- #include <asm/arch/board.h>
-+#include <asm/arch/cpu.h>
- #include <asm/arch/at91_rtt.h>
-
-
-@@ -150,6 +151,9 @@ static int at91_rtc_settime(struct devic
- return 0;
- }
-
-+/*
-+ * Read alarm time and date in RTC
-+ */
- static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
- {
- struct sam9_rtc *rtc = dev_get_drvdata(dev);
-@@ -176,6 +180,9 @@ static int at91_rtc_readalarm(struct dev
- return 0;
- }
-
-+/*
-+ * Set alarm time and date in RTC
-+ */
- static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
- {
- struct sam9_rtc *rtc = dev_get_drvdata(dev);
-@@ -321,10 +328,6 @@ static int __init at91_rtc_probe(struct
- if (!rtc)
- return -ENOMEM;
-
-- /* platform setup code should have handled this; sigh */
-- if (!device_can_wakeup(&pdev->dev))
-- device_init_wakeup(&pdev->dev, 1);
--
- platform_set_drvdata(pdev, rtc);
- rtc->rtt = (void __force __iomem *) (AT91_VA_BASE_SYS - AT91_BASE_SYS);
- rtc->rtt += r->start;
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -113,6 +113,15 @@ config SPI_GPIO
-
- If unsure, say N.
-
-+config SPI_AT91
-+ tristate "AT91RM9200 Bitbang SPI Master"
-+ depends on SPI_MASTER && ARCH_AT91RM9200 && !SPI_ATMEL && EXPERIMENTAL
-+ select SPI_BITBANG
-+ help
-+ This is dumb PIO bitbanging driver for the Atmel AT91RM9200.
-+ The SPI_ATMEL driver will be its replacement, using the native
-+ SPI hardware and its DMA controller.
-+
- config SPI_IMX
- tristate "Freescale iMX SPI controller"
- depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -29,6 +29,7 @@ obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24x
- obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
- obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
- obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o
-+obj-$(CONFIG_SPI_AT91) += spi_at91_bitbang.o
- # ... add above this line ...
-
- # SPI protocol drivers (device/link on bus)
---- /dev/null
-+++ b/drivers/spi/spi_at91_bitbang.c
-@@ -0,0 +1,208 @@
-+/*
-+ * at91_spi.c - at91 SPI driver (BOOTSTRAP/BITBANG VERSION)
-+ *
-+ * Copyright (C) 2006 David Brownell
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/spi/spi.h>
-+#include <linux/spi/spi_bitbang.h>
-+
-+#include <asm/arch/gpio.h>
-+
-+
-+/*
-+ * FIXME this bitbanging version is just to help bootstrap systems until
-+ * there's a native SPI+IRQ+DMA controller driver ... such a driver should
-+ * be a drop-in replacement for this one, and much faster.
-+ *
-+ * remember:
-+ *
-+ * - other at91 parts (like at91sam9) have multiple controllers
-+ * and different pin muxing; this version is at91rm9200 specfic.
-+ *
-+ * - at91sam9261 SPI0 pins are directly muxed with MMC/SD pins.
-+ *
-+ * - rm9200 spi chipselects drop wrongly, so the native driver
-+ * will need to use gpios much like this does.
-+ *
-+ * - real hardware only allows 8..16 bits per word, while this
-+ * bitbanger allows 1..32 (incompatible superset).
-+ *
-+ * - this disregards clock parameters. with inlined gpio calls,
-+ * gcc 3.4.4 produces about 1.5 mbit/sec, more than 2x faster
-+ * than using the subroutined veresion from txrx_word().
-+ *
-+ * - suspend/resume and <linux/clk.h> support is missing ...
-+ */
-+
-+#define spi_miso_bit AT91_PIN_PA0
-+#define spi_mosi_bit AT91_PIN_PA1
-+#define spi_sck_bit AT91_PIN_PA2
-+
-+struct at91_spi {
-+ struct spi_bitbang bitbang;
-+ struct platform_device *pdev;
-+};
-+
-+/*----------------------------------------------------------------------*/
-+
-+static inline void setsck(struct spi_device *spi, int is_on)
-+{
-+ at91_set_gpio_value(spi_sck_bit, is_on);
-+}
-+
-+static inline void setmosi(struct spi_device *spi, int is_on)
-+{
-+ at91_set_gpio_value(spi_mosi_bit, is_on);
-+}
-+
-+static inline int getmiso(struct spi_device *spi)
-+{
-+ return at91_get_gpio_value(spi_miso_bit);
-+}
-+
-+static void at91_spi_chipselect(struct spi_device *spi, int is_active)
-+{
-+ unsigned long cs = (unsigned long) spi->controller_data;
-+
-+ /* set default clock polarity */
-+ if (is_active)
-+ setsck(spi, spi->mode & SPI_CPOL);
-+
-+ /* only support active-low (default) */
-+ at91_set_gpio_value(cs, !is_active);
-+}
-+
-+/*
-+ * NOTE: this is "as fast as we can"; it should be a function of
-+ * the device clock ...
-+ */
-+#define spidelay(X) do{} while(0)
-+
-+#define EXPAND_BITBANG_TXRX
-+#include <linux/spi/spi_bitbang.h>
-+
-+static u32 at91_spi_txrx_word_mode0(struct spi_device *spi,
-+ unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, 8);
-+}
-+
-+static u32 at91_spi_txrx_word_mode1(struct spi_device *spi,
-+ unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, 8);
-+}
-+
-+static u32 at91_spi_txrx_word_mode2(struct spi_device *spi,
-+ unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, 8);
-+}
-+
-+static u32 at91_spi_txrx_word_mode3(struct spi_device *spi,
-+ unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, 8);
-+}
-+
-+/*----------------------------------------------------------------------*/
-+
-+static int __init at91_spi_probe(struct platform_device *pdev)
-+{
-+ int status;
-+ struct spi_master *master;
-+ struct at91_spi *at91_spi;
-+
-+ if (pdev->id != 0) /* SPI0 bus */
-+ return -EINVAL;
-+
-+ master = spi_alloc_master(&pdev->dev, sizeof *at91_spi);
-+ if (!master)
-+ return -ENOMEM;
-+
-+ at91_spi = spi_master_get_devdata(master);
-+ at91_spi->pdev = pdev;
-+ platform_set_drvdata(pdev, at91_spi);
-+
-+ /* SPI and bitbang hookup */
-+ master->bus_num = 0;
-+ master->num_chipselect = 4;
-+
-+ at91_spi->bitbang.master = spi_master_get(master);
-+ at91_spi->bitbang.chipselect = at91_spi_chipselect;
-+ at91_spi->bitbang.txrx_word[SPI_MODE_0] = at91_spi_txrx_word_mode0;
-+ at91_spi->bitbang.txrx_word[SPI_MODE_1] = at91_spi_txrx_word_mode1;
-+ at91_spi->bitbang.txrx_word[SPI_MODE_2] = at91_spi_txrx_word_mode2;
-+ at91_spi->bitbang.txrx_word[SPI_MODE_3] = at91_spi_txrx_word_mode3;
-+
-+ status = spi_bitbang_start(&at91_spi->bitbang);
-+ if (status < 0)
-+ (void) spi_master_put(at91_spi->bitbang.master);
-+
-+ return status;
-+}
-+
-+static int __exit at91_spi_remove(struct platform_device *pdev)
-+{
-+ struct at91_spi *at91_spi = platform_get_drvdata(pdev);
-+ int status;
-+
-+ /* stop() unregisters child devices too */
-+ status = spi_bitbang_stop(&at91_spi->bitbang);
-+ (void) spi_master_put(at91_spi->bitbang.master);
-+
-+ platform_set_drvdata(pdev, NULL);
-+ return status;
-+}
-+
-+static struct platform_driver at91_spi_driver = {
-+ .probe = at91_spi_probe,
-+ .remove = __exit_p(at91_spi_remove),
-+ .driver = {
-+ .name = "at91_spi",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init at91_spi_init(void)
-+{
-+ at91_set_gpio_output(spi_sck_bit, 0);
-+ at91_set_gpio_output(spi_mosi_bit, 0);
-+ at91_set_gpio_input(spi_miso_bit, 1 /* pullup */);
-+
-+ /* register driver */
-+ return platform_driver_register(&at91_spi_driver);
-+}
-+
-+static void __exit at91_spi_exit(void)
-+{
-+ platform_driver_unregister(&at91_spi_driver);
-+}
-+
-+device_initcall(at91_spi_init);
-+module_exit(at91_spi_exit);
-+
-+MODULE_ALIAS("at91_spi.0");
-+
-+MODULE_DESCRIPTION("AT91 SPI support (BOOTSTRAP/BITBANG VERSION)");
-+MODULE_AUTHOR("David Brownell");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:at91_spi");
---- a/drivers/usb/gadget/Kconfig
-+++ b/drivers/usb/gadget/Kconfig
-@@ -118,10 +118,10 @@ config USB_AMD5536UDC
- config USB_GADGET_ATMEL_USBA
- boolean "Atmel USBA"
- select USB_GADGET_DUALSPEED
-- depends on AVR32
-+ depends on AVR32 || ARCH_AT91CAP9 || ARCH_AT91SAM9RL
- help
- USBA is the integrated high-speed USB Device controller on
-- the AT32AP700x processors from Atmel.
-+ the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
-
- config USB_ATMEL_USBA
- tristate
---- a/drivers/usb/gadget/at91_udc.c
-+++ b/drivers/usb/gadget/at91_udc.c
-@@ -1827,7 +1827,7 @@ static int at91udc_suspend(struct platfo
- */
- if ((!udc->suspended && udc->addr)
- || !wake
-- || at91_suspend_entering_slow_clock()) {
-+ || clk_must_disable(udc->fclk)) {
- pullup(udc, 0);
- wake = 0;
- } else
---- a/drivers/usb/gadget/atmel_usba_udc.c
-+++ b/drivers/usb/gadget/atmel_usba_udc.c
-@@ -18,6 +18,7 @@
- #include <linux/platform_device.h>
- #include <linux/usb/ch9.h>
- #include <linux/usb/gadget.h>
-+#include <linux/usb/atmel_usba_udc.h>
- #include <linux/delay.h>
-
- #include <asm/gpio.h>
-@@ -27,6 +28,7 @@
-
-
- static struct usba_udc the_udc;
-+static struct usba_ep *usba_ep;
-
- #ifdef CONFIG_USB_GADGET_DEBUG_FS
- #include <linux/debugfs.h>
-@@ -324,53 +326,6 @@ static int vbus_is_present(struct usba_u
- return 1;
- }
-
--static void copy_to_fifo(void __iomem *fifo, const void *buf, int len)
--{
-- unsigned long tmp;
--
-- DBG(DBG_FIFO, "copy to FIFO (len %d):\n", len);
-- for (; len > 0; len -= 4, buf += 4, fifo += 4) {
-- tmp = *(unsigned long *)buf;
-- if (len >= 4) {
-- DBG(DBG_FIFO, " -> %08lx\n", tmp);
-- __raw_writel(tmp, fifo);
-- } else {
-- do {
-- DBG(DBG_FIFO, " -> %02lx\n", tmp >> 24);
-- __raw_writeb(tmp >> 24, fifo);
-- fifo++;
-- tmp <<= 8;
-- } while (--len);
-- break;
-- }
-- }
--}
--
--static void copy_from_fifo(void *buf, void __iomem *fifo, int len)
--{
-- union {
-- unsigned long *w;
-- unsigned char *b;
-- } p;
-- unsigned long tmp;
--
-- DBG(DBG_FIFO, "copy from FIFO (len %d):\n", len);
-- for (p.w = buf; len > 0; len -= 4, p.w++, fifo += 4) {
-- if (len >= 4) {
-- tmp = __raw_readl(fifo);
-- *p.w = tmp;
-- DBG(DBG_FIFO, " -> %08lx\n", tmp);
-- } else {
-- do {
-- tmp = __raw_readb(fifo);
-- *p.b = tmp;
-- DBG(DBG_FIFO, " -> %02lx\n", tmp);
-- fifo++, p.b++;
-- } while (--len);
-- }
-- }
--}
--
- static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req)
- {
- unsigned int transaction_len;
-@@ -387,7 +342,7 @@ static void next_fifo_transaction(struct
- ep->ep.name, req, transaction_len,
- req->last_transaction ? ", done" : "");
-
-- copy_to_fifo(ep->fifo, req->req.buf + req->req.actual, transaction_len);
-+ memcpy_toio(ep->fifo, req->req.buf + req->req.actual, transaction_len);
- usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
- req->req.actual += transaction_len;
- }
-@@ -476,7 +431,7 @@ static void receive_data(struct usba_ep
- bytecount = req->req.length - req->req.actual;
- }
-
-- copy_from_fifo(req->req.buf + req->req.actual,
-+ memcpy_fromio(req->req.buf + req->req.actual,
- ep->fifo, bytecount);
- req->req.actual += bytecount;
-
-@@ -1029,33 +984,6 @@ static const struct usb_gadget_ops usba_
- .set_selfpowered = usba_udc_set_selfpowered,
- };
-
--#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
--{ \
-- .ep = { \
-- .ops = &usba_ep_ops, \
-- .name = nam, \
-- .maxpacket = maxpkt, \
-- }, \
-- .udc = &the_udc, \
-- .queue = LIST_HEAD_INIT(usba_ep[idx].queue), \
-- .fifo_size = maxpkt, \
-- .nr_banks = maxbk, \
-- .index = idx, \
-- .can_dma = dma, \
-- .can_isoc = isoc, \
--}
--
--static struct usba_ep usba_ep[] = {
-- EP("ep0", 0, 64, 1, 0, 0),
-- EP("ep1in-bulk", 1, 512, 2, 1, 1),
-- EP("ep2out-bulk", 2, 512, 2, 1, 1),
-- EP("ep3in-int", 3, 64, 3, 1, 0),
-- EP("ep4out-int", 4, 64, 3, 1, 0),
-- EP("ep5in-iso", 5, 1024, 3, 1, 1),
-- EP("ep6out-iso", 6, 1024, 3, 1, 1),
--};
--#undef EP
--
- static struct usb_endpoint_descriptor usba_ep0_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-@@ -1074,7 +1002,6 @@ static void nop_release(struct device *d
- static struct usba_udc the_udc = {
- .gadget = {
- .ops = &usba_udc_ops,
-- .ep0 = &usba_ep[0].ep,
- .ep_list = LIST_HEAD_INIT(the_udc.gadget.ep_list),
- .is_dualspeed = 1,
- .name = "atmel_usba_udc",
-@@ -1231,7 +1158,7 @@ static int do_test_mode(struct usba_udc
- } else {
- usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
- usba_writel(udc, TST, USBA_TST_PKT_MODE);
-- copy_to_fifo(ep->fifo, test_packet_buffer,
-+ memcpy_toio(ep->fifo, test_packet_buffer,
- sizeof(test_packet_buffer));
- usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
- dev_info(dev, "Entering Test_Packet mode...\n");
-@@ -1530,13 +1457,13 @@ restart:
- DBG(DBG_HW, "Packet length: %u\n", pkt_len);
- if (pkt_len != sizeof(crq)) {
- pr_warning("udc: Invalid packet length %u "
-- "(expected %lu)\n", pkt_len, sizeof(crq));
-+ "(expected %zu)\n", pkt_len, sizeof(crq));
- set_protocol_stall(udc, ep);
- return;
- }
-
- DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo);
-- copy_from_fifo(crq.data, ep->fifo, sizeof(crq));
-+ memcpy_fromio(crq.data, ep->fifo, sizeof(crq));
-
- /* Free up one bank in the FIFO so that we can
- * generate or receive a reply right away. */
-@@ -1908,7 +1835,7 @@ static int __init usba_udc_probe(struct
-
- regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
- fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
-- if (!regs || !fifo)
-+ if (!regs || !fifo || !pdata)
- return -ENXIO;
-
- irq = platform_get_irq(pdev, 0);
-@@ -1956,16 +1883,44 @@ static int __init usba_udc_probe(struct
- usba_writel(udc, CTRL, 0);
- clk_disable(pclk);
-
-+ usba_ep = kmalloc(sizeof(struct usba_ep) * pdata->num_ep,
-+ GFP_KERNEL);
-+ if (!usba_ep)
-+ goto err_alloc_ep;
-+
-+ the_udc.gadget.ep0 = &usba_ep[0].ep;
-+
- INIT_LIST_HEAD(&usba_ep[0].ep.ep_list);
- usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0);
- usba_ep[0].dma_regs = udc->regs + USBA_DMA_BASE(0);
- usba_ep[0].fifo = udc->fifo + USBA_FIFO_BASE(0);
-- for (i = 1; i < ARRAY_SIZE(usba_ep); i++) {
-+ usba_ep[0].ep.ops = &usba_ep_ops;
-+ usba_ep[0].ep.name = pdata->ep[0].name;
-+ usba_ep[0].ep.maxpacket = pdata->ep[0].fifo_size;
-+ usba_ep[0].udc = &the_udc;
-+ INIT_LIST_HEAD(&usba_ep[0].queue);
-+ usba_ep[0].fifo_size = pdata->ep[0].fifo_size;
-+ usba_ep[0].nr_banks = pdata->ep[0].nr_banks;
-+ usba_ep[0].index = pdata->ep[0].index;
-+ usba_ep[0].can_dma = pdata->ep[0].can_dma;
-+ usba_ep[0].can_isoc = pdata->ep[0].can_isoc;
-+
-+ for (i = 1; i < pdata->num_ep; i++) {
- struct usba_ep *ep = &usba_ep[i];
-
- ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
- ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
- ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
-+ ep->ep.ops = &usba_ep_ops;
-+ ep->ep.name = pdata->ep[i].name;
-+ ep->ep.maxpacket = pdata->ep[i].fifo_size;
-+ ep->udc = &the_udc;
-+ INIT_LIST_HEAD(&ep->queue);
-+ ep->fifo_size = pdata->ep[i].fifo_size;
-+ ep->nr_banks = pdata->ep[i].nr_banks;
-+ ep->index = pdata->ep[i].index;
-+ ep->can_dma = pdata->ep[i].can_dma;
-+ ep->can_isoc = pdata->ep[i].can_isoc;
-
- list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
- }
-@@ -1984,7 +1939,7 @@ static int __init usba_udc_probe(struct
- goto err_device_add;
- }
-
-- if (pdata && pdata->vbus_pin != GPIO_PIN_NONE) {
-+ if (pdata->vbus_pin >= 0) {
- if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
- udc->vbus_pin = pdata->vbus_pin;
-
-@@ -2004,7 +1959,7 @@ static int __init usba_udc_probe(struct
- }
-
- usba_init_debugfs(udc);
-- for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
-+ for (i = 1; i < pdata->num_ep; i++)
- usba_ep_init_debugfs(udc, &usba_ep[i]);
-
- return 0;
-@@ -2012,6 +1967,8 @@ static int __init usba_udc_probe(struct
- err_device_add:
- free_irq(irq, udc);
- err_request_irq:
-+ kfree(usba_ep);
-+err_alloc_ep:
- iounmap(udc->fifo);
- err_map_fifo:
- iounmap(udc->regs);
-@@ -2029,10 +1986,11 @@ static int __exit usba_udc_remove(struct
- {
- struct usba_udc *udc;
- int i;
-+ struct usba_platform_data *pdata = pdev->dev.platform_data;
-
- udc = platform_get_drvdata(pdev);
-
-- for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
-+ for (i = 1; i < pdata->num_ep; i++)
- usba_ep_cleanup_debugfs(&usba_ep[i]);
- usba_cleanup_debugfs(udc);
-
---- a/drivers/usb/host/ohci-at91.c
-+++ b/drivers/usb/host/ohci-at91.c
-@@ -330,7 +330,7 @@ ohci_hcd_at91_drv_suspend(struct platfor
- *
- * REVISIT: some boards will be able to turn VBUS off...
- */
-- if (at91_suspend_entering_slow_clock()) {
-+ if (clk_must_disable(fclk)) {
- ohci_usb_reset (ohci);
- at91_stop_clock();
- }
---- a/drivers/video/Kconfig
-+++ b/drivers/video/Kconfig
-@@ -889,6 +889,17 @@ config FB_EPSON1355
- framebuffer. Product specs at
- <http://www.erd.epson.com/vdc/html/products.htm>.
-
-+config FB_S1D15605
-+ tristate "Epson S1D15605 framebuffer support"
-+ depends on FB
-+ default m if MACH_KB9200
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ help
-+ Build in support for the S1D15605 Epson Research 128x64
-+ LCD controller as a framebuffer.
-+
- config FB_S1D13XXX
- tristate "Epson S1D13XXX framebuffer support"
- depends on FB
---- a/drivers/video/Makefile
-+++ b/drivers/video/Makefile
-@@ -87,7 +87,8 @@ obj-$(CONFIG_FB_G364) += g36
- obj-$(CONFIG_FB_SA1100) += sa1100fb.o
- obj-$(CONFIG_FB_HIT) += hitfb.o
- obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o
--obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
-+obj-$(CONFIG_FB_S1D15605) += s1d15605fb.o
-+obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
- obj-$(CONFIG_FB_PVR2) += pvr2fb.o
- obj-$(CONFIG_FB_VOODOO1) += sstfb.o
- obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
---- a/drivers/video/atmel_lcdfb.c
-+++ b/drivers/video/atmel_lcdfb.c
-@@ -31,7 +31,7 @@
- #define ATMEL_LCDC_CVAL_DEFAULT 0xc8
- #define ATMEL_LCDC_DMA_BURST_LEN 8
-
--#if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9)
-+#if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9) || defined(CONFIG_ARCH_AT91SAM9RL)
- #define ATMEL_LCDC_FIFO_SIZE 2048
- #else
- #define ATMEL_LCDC_FIFO_SIZE 512
-@@ -903,11 +903,45 @@ static int __exit atmel_lcdfb_remove(str
- return 0;
- }
-
--static struct platform_driver atmel_lcdfb_driver = {
-- .remove = __exit_p(atmel_lcdfb_remove),
-+#ifdef CONFIG_PM
-+
-+static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg)
-+{
-+ struct fb_info *info = platform_get_drvdata(pdev);
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+
-+ sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
-+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
-+ if (sinfo->atmel_lcdfb_power_control)
-+ sinfo->atmel_lcdfb_power_control(0);
-+ atmel_lcdfb_stop_clock(sinfo);
-
--// FIXME need suspend, resume
-+ return 0;
-+}
-+
-+static int atmel_lcdfb_resume(struct platform_device *pdev)
-+{
-+ struct fb_info *info = platform_get_drvdata(pdev);
-+ struct atmel_lcdfb_info *sinfo = info->par;
-
-+ atmel_lcdfb_start_clock(sinfo);
-+ if (sinfo->atmel_lcdfb_power_control)
-+ sinfo->atmel_lcdfb_power_control(1);
-+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon);
-+
-+ return 0;
-+}
-+
-+#else
-+#define atmel_lcdfb_suspend NULL
-+#define atmel_lcdfb_resume NULL
-+#endif
-+
-+
-+static struct platform_driver atmel_lcdfb_driver = {
-+ .remove = __exit_p(atmel_lcdfb_remove),
-+ .suspend = atmel_lcdfb_suspend,
-+ .resume = atmel_lcdfb_resume,
- .driver = {
- .name = "atmel_lcdfb",
- .owner = THIS_MODULE,
---- a/drivers/video/backlight/Kconfig
-+++ b/drivers/video/backlight/Kconfig
-@@ -112,3 +112,11 @@ config BACKLIGHT_CARILLO_RANCH
- help
- If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
- backlight driver.
-+
-+config BACKLIGHT_KB920x
-+ tristate "KwikByte KB9202 Backlight Driver"
-+ depends on BACKLIGHT_CLASS_DEVICE && MACH_KB9200
-+ default y
-+ help
-+ If you have a KwikByte KB9202 board, say Y to enable the
-+ backlight driver.
---- a/drivers/video/backlight/Makefile
-+++ b/drivers/video/backlight/Makefile
-@@ -10,3 +10,4 @@ obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomo
- obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o
- obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
- obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
-+obj-$(CONFIG_BACKLIGHT_KB920x) += kb920x_bl.o
---- /dev/null
-+++ b/drivers/video/backlight/kb920x_bl.c
-@@ -0,0 +1,164 @@
-+/*
-+ * Backlight Driver for KB9202
-+ *
-+ * Copyright (c) 2006 KwikByte
-+ *
-+ * Based on Sharp's Corgi Backlight Driver
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/spinlock.h>
-+#include <linux/fb.h>
-+#include <linux/backlight.h>
-+
-+#include <asm/arch/gpio.h>
-+
-+/* The backlight is on(1)/off(0) */
-+#define KB9202_DEFAULT_INTENSITY 1
-+#define KB9202_MAX_INTENSITY 1
-+
-+static int kb9202bl_suspended;
-+static int current_intensity = 0;
-+static DEFINE_SPINLOCK(bl_lock);
-+
-+static int kb9202bl_set_intensity(struct backlight_device *bd)
-+{
-+ unsigned long flags;
-+ int intensity = bd->props.brightness;
-+
-+ if (bd->props.power != FB_BLANK_UNBLANK)
-+ intensity = 0;
-+ if (bd->props.fb_blank != FB_BLANK_UNBLANK)
-+ intensity = 0;
-+ if (kb9202bl_suspended)
-+ intensity = 0;
-+
-+ if ((!current_intensity) && (bd->props.power == FB_BLANK_UNBLANK))
-+ intensity = 1;
-+
-+ spin_lock_irqsave(&bl_lock, flags);
-+ if (intensity)
-+ gpio_set_value(AT91_PIN_PC23, 1);
-+ else
-+ gpio_set_value(AT91_PIN_PC23, 0);
-+ spin_unlock_irqrestore(&bl_lock, flags);
-+
-+ current_intensity = intensity;
-+
-+ return 0;
-+}
-+
-+static int kb9202bl_get_intensity(struct backlight_device *bd)
-+{
-+ return current_intensity;
-+}
-+
-+static struct backlight_ops kb9202bl_ops = {
-+ .get_brightness = kb9202bl_get_intensity,
-+ .update_status = kb9202bl_set_intensity,
-+};
-+
-+static int __init kb9202bl_probe(struct platform_device *pdev)
-+{
-+ struct backlight_device *bd;
-+
-+ bd = backlight_device_register ("kb9202-bl", &pdev->dev, NULL, &kb9202bl_ops);
-+ if (IS_ERR(bd))
-+ return PTR_ERR(bd);
-+
-+ platform_set_drvdata(pdev, bd);
-+
-+ bd->props.max_brightness = KB9202_MAX_INTENSITY;
-+ bd->props.brightness = KB9202_DEFAULT_INTENSITY;
-+ (void) kb9202bl_set_intensity(bd);
-+
-+ return 0;
-+}
-+
-+static int kb9202bl_remove(struct platform_device *pdev)
-+{
-+ struct backlight_device *bd = platform_get_drvdata(pdev);
-+
-+ bd->props.brightness = 0;
-+ bd->props.power = 0;
-+ (void) kb9202bl_set_intensity(bd);
-+
-+ backlight_device_unregister(bd);
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int kb9202bl_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+ struct backlight_device *bd = platform_get_drvdata(pdev);
-+
-+ kb9202bl_suspended = 1;
-+ (void) kb9202bl_set_intensity(bd);
-+ return 0;
-+}
-+
-+static int kb9202bl_resume(struct platform_device *pdev)
-+{
-+ struct backlight_device *bd = platform_get_drvdata(pdev);
-+
-+ kb9202bl_suspended = 0;
-+ (void) kb9202bl_set_intensity(bd);
-+ return 0;
-+}
-+#else
-+#define kb9202bl_suspend NULL
-+#define kb9202bl_resume NULL
-+#endif
-+
-+static struct platform_driver kb9202bl_driver = {
-+ .probe = kb9202bl_probe,
-+ .remove = kb9202bl_remove,
-+ .suspend = kb9202bl_suspend,
-+ .resume = kb9202bl_resume,
-+ .driver = {
-+ .name = "kb9202-bl",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static struct platform_device *kb9202bl_device;
-+
-+static int __init kb9202bl_init(void)
-+{
-+ int ret;
-+
-+ ret = platform_driver_register(&kb9202bl_driver);
-+ if (!ret) {
-+ kb9202bl_device = platform_device_alloc("kb9202-bl", -1);
-+ if (!kb9202bl_device)
-+ return -ENOMEM;
-+
-+ ret = platform_device_add(kb9202bl_device);
-+ if (ret) {
-+ platform_device_put(kb9202bl_device);
-+ platform_driver_unregister(&kb9202bl_driver);
-+ }
-+ }
-+ return ret;
-+}
-+
-+static void __exit kb9202bl_exit(void)
-+{
-+ platform_device_unregister(kb9202bl_device);
-+ platform_driver_unregister(&kb9202bl_driver);
-+}
-+
-+module_init(kb9202bl_init);
-+module_exit(kb9202bl_exit);
-+
-+MODULE_AUTHOR("KwikByte <kb9200_dev@kwikbyte.com>");
-+MODULE_DESCRIPTION("KB9202 Backlight Driver");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/video/s1d15605fb.c
-@@ -0,0 +1,655 @@
-+/*
-+ * drivers/video/s1d15605.c
-+ *
-+ * Adapted from several sources including:
-+ * 1) Driver for AT91 LCD Controller
-+ * Copyright (C) 2006 Atmel
-+ *
-+ * 2) Copyright (C) 2005 S. Kevin Hester
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive for
-+ * more details.
-+ *
-+ * This is a basic framebuffer driver for the Optrex F-51320 128x64 mono LCD
-+ * display. This display uses a clone of the common Epson SED 1531 display
-+ * controller.
-+ *
-+ * I've heavily borrowed code from the vfb.c driver.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifdef DEBUG
-+#define MSG(string, args...) printk("s1d15605fb:" string, ##args)
-+#else
-+#define MSG(string, args...)
-+#endif
-+
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+
-+#include <asm/uaccess.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#ifdef CONFIG_PMAC_BACKLIGHT
-+#include <asm/backlight.h>
-+#endif
-+
-+#define VIDEOWIDTH 128
-+#define VIDEOHEIGHT 64
-+#define VIDEODEPTH 1 /* bits/pixel */
-+#define VIDEOWIDTH_BYTES ((VIDEOWIDTH * VIDEODEPTH) / 8)
-+
-+/* The number of bytes that actually go to the device */
-+#define ACTUALVIDEOMEMSIZE (VIDEOWIDTH_BYTES * VIDEOHEIGHT)
-+#define VIDEOMEMSIZE PAGE_SIZE
-+
-+static struct fb_var_screeninfo s1d15605_default __initdata = {
-+ .xres = VIDEOWIDTH,
-+ .yres = VIDEOHEIGHT,
-+ .xres_virtual = VIDEOWIDTH,
-+ .yres_virtual = VIDEOHEIGHT,
-+ .bits_per_pixel = VIDEODEPTH,
-+ .red = { 0, 1, 0 },
-+ .green = { 0, 1, 0 },
-+ .blue = { 0, 1, 0 },
-+ .activate = FB_ACTIVATE_NOW,
-+ .pixclock = 20000,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+};
-+
-+static struct fb_fix_screeninfo s1d15605_fix __initdata = {
-+ .id = "s1d15605",
-+ .type = FB_TYPE_PACKED_PIXELS,
-+ .visual = FB_VISUAL_MONO10,
-+ .xpanstep = 0,
-+ .ypanstep = 0,
-+ .ywrapstep = 0,
-+ .accel = FB_ACCEL_NONE,
-+};
-+
-+struct s1d15605fb_info {
-+ struct fb_info *info;
-+ char *mmio;
-+ unsigned long reset_pin;
-+ struct platform_device *pdev;
-+};
-+
-+/*
-+ * LCD device interface
-+ */
-+#define RESET_DISPLAY 0xE2
-+#define LCD_BIAS_1_9 0xA2
-+#define ADC_SELECT_REVERSE 0xA1
-+#define COMMON_OUTPUT_NORMAL 0xC0
-+#define V5_RESISTOR_RATIO 0x26
-+#define ELECTRONIC_VOLUME_SET 0x81
-+#define ELECTRONIC_VOLUME_INIT 0x20
-+#define POWER_CONTROL_SET 0x28
-+#define VOLTAGE_REGULATOR 0x02
-+#define VOLTAGE_FOLLOWER 0x01
-+#define BOOSTER_CIRCUIT 0x04
-+#define DISPLAY_ON 0xAF
-+#define START_LINE_SET 0x40
-+#define PAGE_ADDRESS_SET 0xB0
-+#define COLUMN_ADDRESS_HIGH 0x10
-+#define COLUMN_ADDRESS_LOW 0x00
-+#define RESISTOR_RATIO_START 0x20
-+
-+#define NUM_OF_PAGES 8
-+#define NUM_OF_COLUMNS 128
-+
-+#define WRITE_COMMAND(x) __raw_writeb((x), (sinfo)->mmio)
-+#define READ_COMMAND __raw_readb((sinfo)->mmio)
-+#define WRITE_DATA(x) __raw_writeb((x), (sinfo)->mmio + (0x10000))
-+#define READ_DATA __raw_readb((sinfo)->mmio + (0x10000))
-+
-+
-+/*
-+ * s1d15605fb_resize_framebuffer
-+ *
-+ * Free allocated space if different. Allocate on new of changed.
-+ * Returns -ENOMEM if the new framebuffer can not be allocated,
-+ * zero on success.
-+ */
-+static int s1d15605fb_resize_framebuffer(struct s1d15605fb_info *sinfo)
-+{
-+ struct fb_info *info = sinfo->info;
-+ struct fb_fix_screeninfo *fix = &info->fix;
-+ struct fb_var_screeninfo *var = &info->var;
-+ unsigned int new_size;
-+ void *new_vaddr;
-+
-+ new_size = ((var->xres_virtual * var->yres_virtual * var->bits_per_pixel) / 8);
-+
-+ MSG("%s: x (%d) y (%d) bpp (%d): new size 0x%08x\n", __FUNCTION__,
-+ var->xres_virtual, var->yres_virtual, var->bits_per_pixel, new_size);
-+
-+ if (new_size == fix->smem_len)
-+ return 0;
-+
-+ if (fix->smem_len) {
-+ kfree(info->screen_base);
-+ }
-+
-+ new_vaddr = kmalloc(new_size, GFP_KERNEL);
-+
-+ if (!new_vaddr) {
-+ fix->smem_len = 0;
-+ return -ENOMEM;
-+ }
-+
-+ info->screen_base = new_vaddr;
-+ fix->smem_start = (unsigned)new_vaddr;
-+ fix->smem_len = new_size;
-+ fix->line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
-+
-+ dev_info(info->device,
-+ "%luKiB frame buffer at %08lx (mapped at %p)\n",
-+ (unsigned long)info->fix.smem_len / 1024,
-+ (unsigned long)info->fix.smem_start,
-+ info->screen_base);
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * The s1d15605 seems to be divided into eight 128 pixel wide pages (from top to
-+ * bottom) each page seems to be eight pixels high, where these eight pixels are
-+ * one byte
-+ */
-+static void s1d15605_update(struct fb_info *info)
-+{
-+ struct s1d15605fb_info *sinfo = info->par;
-+ int page, i, row, colmask;
-+ u8 retVal, *rowPtr;
-+
-+ WRITE_COMMAND(START_LINE_SET);
-+ for (page = 0; page < NUM_OF_PAGES; ++page) {
-+ WRITE_COMMAND(PAGE_ADDRESS_SET + page);
-+ WRITE_COMMAND(COLUMN_ADDRESS_HIGH);
-+ WRITE_COMMAND(COLUMN_ADDRESS_LOW);
-+
-+ for (i = 0; i < NUM_OF_COLUMNS; ++i)
-+ {
-+ /* point of opportunity: optimization */
-+ colmask = (1 << (i & 0x7));
-+ rowPtr = (u8*)(info->screen_base);
-+ rowPtr += (VIDEOWIDTH_BYTES * 8 * page);
-+ rowPtr += (i >> 3);
-+ retVal = 0;
-+ for (row = 0; row < 8; ++row)
-+ {
-+ retVal = (retVal >> 1) | (((*rowPtr) & colmask) ? 0x80 : 0);
-+ rowPtr += VIDEOWIDTH_BYTES;
-+ }
-+ WRITE_DATA(retVal);
-+ }
-+ }
-+
-+ WRITE_COMMAND(DISPLAY_ON);
-+}
-+
-+
-+/*
-+ * Setting the video mode has been split into two parts.
-+ * First part, xxxfb_check_var, must not write anything
-+ * to hardware, it should only verify and adjust var.
-+ * This means it doesn't alter par but it does use hardware
-+ * data from it to check this var.
-+ */
-+static int s1d15605_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
-+{
-+ /*
-+ * Some very basic checks
-+ */
-+ if (!var->xres)
-+ var->xres = 1;
-+ if (!var->yres)
-+ var->yres = 1;
-+ if (var->xres > var->xres_virtual)
-+ var->xres_virtual = var->xres;
-+ if (var->yres > var->yres_virtual)
-+ var->yres_virtual = var->yres;
-+
-+ if(var->bits_per_pixel > VIDEODEPTH)
-+ return -EINVAL;
-+
-+ /*
-+ * Memory limit
-+ */
-+ if (((var->yres_virtual * var->bits_per_pixel * var->yres_virtual) >> 3) >
-+ ACTUALVIDEOMEMSIZE)
-+ return -ENOMEM;
-+
-+ /*
-+ * Now that we checked it we alter var. The reason being is that the video
-+ * mode passed in might not work but slight changes to it might make it
-+ * work. This way we let the user know what is acceptable.
-+ */
-+ switch (var->bits_per_pixel) {
-+ case 1:
-+ var->red.offset = var->green.offset = var->blue.offset = 0;
-+ var->red.length = var->green.length = var->blue.length
-+ = var->bits_per_pixel;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ var->xoffset = var->yoffset = 0;
-+ var->red.msb_right = var->green.msb_right = var->blue.msb_right =
-+ var->transp.msb_right = 0;
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * This routine actually sets the video mode. It's in here where we
-+ * the hardware state info->par and fix which can be affected by the
-+ * change in par. For this driver it doesn't do much.
-+ */
-+static int s1d15605_set_par(struct fb_info *info)
-+{
-+ int ret;
-+
-+ MSG("%s:\n", __func__);
-+ MSG(" * resolution: %ux%u (%ux%u virtual)\n",
-+ info->var.xres, info->var.yres,
-+ info->var.xres_virtual, info->var.yres_virtual);
-+
-+ ret = s1d15605fb_resize_framebuffer(info->par);
-+
-+ info->fix.visual = FB_VISUAL_MONO10;
-+ return ret;
-+}
-+
-+
-+/*
-+ * Set a single color register. The values supplied are already
-+ * rounded down to the hardware's capabilities (according to the
-+ * entries in the var structure). Return != 0 for invalid regno.
-+ */
-+static int s1d15605_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
-+ u_int transp, struct fb_info *info)
-+{
-+ if (regno > 1) /* no. of hw registers - we only do mono now */
-+ return 1;
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * Currently, the routine will simply shut-off the backlight and prevent
-+ * updates/refreshes. Modify according to application.
-+ *
-+ * 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off
-+ */
-+static int s1d15605_blank(int blank, struct fb_info *info)
-+{
-+#ifdef CONFIG_PMAC_BACKLIGHT
-+ if (blank)
-+ pmac_backlight->props.power = FB_BLANK_POWERDOWN;
-+ else
-+ pmac_backlight->props.power = FB_BLANK_UNBLANK;
-+ backlight_update_status(pmac_backlight);
-+#endif
-+ return 1;
-+}
-+
-+
-+/*
-+ * Pan or Wrap the Display
-+ *
-+ * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag
-+ */
-+/*
-+static int s1d15605_pan_display(struct fb_var_screeninfo *var,
-+ struct fb_info *info)
-+{
-+ if (var->vmode & FB_VMODE_YWRAP) {
-+ if (var->yoffset < 0
-+ || var->yoffset >= info->var.yres_virtual
-+ || var->xoffset)
-+ return -EINVAL;
-+ } else {
-+ if (var->xoffset + var->xres > info->var.xres_virtual ||
-+ var->yoffset + var->yres > info->var.yres_virtual)
-+ return -EINVAL;
-+ }
-+ info->var.xoffset = var->xoffset;
-+ info->var.yoffset = var->yoffset;
-+ if (var->vmode & FB_VMODE_YWRAP)
-+ info->var.vmode |= FB_VMODE_YWRAP;
-+ else
-+ info->var.vmode &= ~FB_VMODE_YWRAP;
-+ return 0;
-+}
-+*/
-+
-+
-+static void s1d15605_copyarea(struct fb_info *info, const struct fb_copyarea *region)
-+{
-+ cfb_copyarea(info, region);
-+ s1d15605_update(info);
-+}
-+
-+
-+static void s1d15605_fillrect (struct fb_info *info, const struct fb_fillrect *rect)
-+{
-+ cfb_fillrect(info, rect);
-+ s1d15605_update(info);
-+}
-+
-+
-+static void s1d15605_imageblit(struct fb_info *p, const struct fb_image *image)
-+{
-+ cfb_imageblit(p, image);
-+ s1d15605_update(p);
-+}
-+
-+
-+/*
-+ * Write the users data to our framebuffer, and then trigger a psuedo DMA
-+ */
-+static ssize_t s1d15605_write(struct fb_info *info, const char *buf,
-+ size_t count, loff_t *ppos)
-+{
-+ unsigned long p = *ppos;
-+ int err;
-+
-+ if (p > info->fix.smem_len)
-+ return -ENOSPC;
-+ if (count >= info->fix.smem_len)
-+ count = info->fix.smem_len;
-+ err = 0;
-+ if (count + p > info->fix.smem_len) {
-+ count = info->fix.smem_len - p;
-+ err = -ENOSPC;
-+ }
-+ if (count) {
-+ char *base_addr;
-+
-+ base_addr = info->screen_base;
-+ count -= copy_from_user(base_addr+p, buf, count);
-+ *ppos += count;
-+ err = -EFAULT;
-+ }
-+
-+ s1d15605_update(info);
-+
-+ if (count)
-+ return count;
-+
-+ return err;
-+}
-+
-+#ifdef USE_PRIVATE_VMA_FXS
-+static void s1d15605_vma_open(struct vm_area_struct *vma)
-+{
-+ // FIXME - store stats in the device data via vm_private_data
-+}
-+
-+
-+static void s1d15605_vma_close(struct vm_area_struct *vma)
-+{
-+ // FIXME - store stats in the device data via vm_private_data
-+}
-+
-+
-+static struct page *s1d15605_vma_nopage(struct vm_area_struct *vma,
-+ unsigned long address, int *type)
-+{
-+ struct page *page;
-+ struct fb_info *info = vma->vm_private_data;
-+
-+ page = virt_to_page(info->screen_base);
-+ get_page(page);
-+
-+ // FIXME - now someone has a link to our page, start periodically blitting
-+ // latest updates to the actual device.
-+
-+ return page;
-+}
-+
-+
-+static struct vm_operations_struct s1d15605_vm_ops = {
-+ .open = s1d15605_vma_open,
-+ .close = s1d15605_vma_close,
-+ .nopage = s1d15605_vma_nopage
-+};
-+
-+
-+/* We don't do much here - because we have special vm_ops */
-+static int s1d15605_mmap(struct fb_info *info, struct vm_area_struct *vma)
-+{
-+ vma->vm_ops = &s1d15605_vm_ops;
-+ vma->vm_flags |= VM_RESERVED;
-+ vma->vm_private_data = info;
-+ s1d15605_vma_open(vma);
-+
-+ return 0;
-+}
-+#endif /* USE_PRIVATE_VMA_FXS */
-+
-+
-+static struct fb_ops s1d15605fb_ops = {
-+ .owner = THIS_MODULE,
-+ .fb_check_var = s1d15605_check_var,
-+ .fb_set_par = s1d15605_set_par,
-+ .fb_setcolreg = s1d15605_setcolreg,
-+ .fb_blank = s1d15605_blank,
-+// .fb_pan_display = s1d15605_pan_display,
-+ .fb_fillrect = s1d15605_fillrect,
-+ .fb_copyarea = s1d15605_copyarea,
-+ .fb_imageblit = s1d15605_imageblit,
-+ .fb_write = s1d15605_write,
-+#ifdef USE_PRIVATE_VMA_FXS
-+ .fb_mmap = s1d15605_mmap,
-+#endif
-+};
-+
-+
-+static void s1d15605_device_init(struct s1d15605fb_info *sinfo) {
-+
-+ char value;
-+
-+ /* release the reset line by reading the device - proto hardware */
-+ value = READ_COMMAND;
-+ value = READ_COMMAND;
-+
-+#ifdef CONFIG_MACH_KB9200
-+ /* new boards have dedicated reset line */
-+ gpio_set_value(sinfo->reset_pin, 1);
-+#endif
-+
-+ /* initialize the device within 5ms */
-+ WRITE_COMMAND(RESET_DISPLAY);
-+ WRITE_COMMAND(LCD_BIAS_1_9);
-+ WRITE_COMMAND(ADC_SELECT_REVERSE);
-+ WRITE_COMMAND(COMMON_OUTPUT_NORMAL);
-+ WRITE_COMMAND(V5_RESISTOR_RATIO);
-+ WRITE_COMMAND(ELECTRONIC_VOLUME_SET);
-+ WRITE_COMMAND(ELECTRONIC_VOLUME_INIT);
-+ WRITE_COMMAND(POWER_CONTROL_SET | VOLTAGE_REGULATOR | VOLTAGE_FOLLOWER | BOOSTER_CIRCUIT);
-+ WRITE_COMMAND(DISPLAY_ON);
-+
-+ WRITE_COMMAND(RESISTOR_RATIO_START + 4);
-+ WRITE_COMMAND(ELECTRONIC_VOLUME_SET);
-+ WRITE_COMMAND(0x33);
-+}
-+
-+
-+static int __init s1d15605fb_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct fb_info *info;
-+ struct s1d15605fb_info *sinfo;
-+ int ret;
-+
-+ MSG("%s\n", __func__);
-+
-+ if (!(info = framebuffer_alloc(sizeof(struct s1d15605fb_info), dev))) {
-+ dev_err(dev, "Cannot allocate framebuffer struct\n");
-+ return -ENOMEM;
-+ }
-+
-+ sinfo = info->par;
-+ sinfo->info = info;
-+ sinfo->pdev = pdev;
-+
-+ if (pdev->num_resources < 2) {
-+ dev_err(dev, "Resources unusable\n");
-+ ret = -ENODEV;
-+ goto free_info;
-+ }
-+
-+ info->fbops = &s1d15605fb_ops;
-+ strcpy(info->fix.id, pdev->name);
-+
-+ info->fix.mmio_start = pdev->resource[0].start;
-+ info->fix.mmio_len = pdev->resource[0].end - pdev->resource[0].start + 1;
-+ sinfo->reset_pin = pdev->resource[1].start;
-+
-+ ret = s1d15605fb_resize_framebuffer(sinfo);
-+ if (ret < 0) {
-+ dev_err(dev, "Cannot resize framebuffer: %d\n", ret);
-+ goto free_fb;
-+ }
-+
-+ if (!request_mem_region(info->fix.mmio_start,
-+ info->fix.mmio_len, pdev->name)) {
-+ ret = -EBUSY;
-+ goto free_fb;
-+ }
-+
-+ sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
-+ if (!sinfo->mmio) {
-+ dev_err(dev, "Cannot map LCD memory region\n");
-+ goto release_mem;
-+ }
-+
-+ s1d15605_device_init(sinfo);
-+
-+ ret = fb_find_mode(&info->var, info, NULL, NULL, 0, NULL, 1);
-+
-+ if (!ret || (ret == 4))
-+ info->var = s1d15605_default;
-+
-+ info->fix = s1d15605_fix;
-+ info->flags = FBINFO_FLAG_DEFAULT |
-+/* FBINFO_HWACCEL_YPAN | */
-+ FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA;
-+
-+ ret = register_framebuffer(info);
-+ if (ret < 0) {
-+ dev_err(dev, "Failed to register framebuffer device: %d\n", ret);
-+ goto unmap_mmio;
-+ }
-+
-+ dev_set_drvdata(dev, info);
-+
-+ memset(info->screen_base, 0, info->fix.smem_len);
-+ info->var.activate |= FB_ACTIVATE_NOW;
-+ ret = fb_set_var(info, &info->var);
-+ if (ret) {
-+ dev_warn(dev, "Unable to set display parameters\n");
-+ }
-+
-+ info->var.activate &= ~(FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW);
-+
-+ dev_dbg(dev, "%s SUCCESS\n", __func__);
-+
-+ dev_info(dev, "Driver $Revision: 1.1 $\n");
-+
-+ return 0;
-+
-+unmap_mmio:
-+ iounmap(sinfo->mmio);
-+release_mem:
-+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+free_fb:
-+ kfree(info->screen_base);
-+
-+free_info:
-+ framebuffer_release(info);
-+
-+ dev_dbg(dev, "%s FAILED\n", __func__);
-+ return ret;
-+}
-+
-+
-+static int __exit s1d15605fb_remove(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct fb_info *info = dev_get_drvdata(dev);
-+ struct s1d15605fb_info *sinfo = info->par;
-+
-+ if (!sinfo)
-+ return 0;
-+
-+ unregister_framebuffer(info);
-+
-+ iounmap(sinfo->mmio);
-+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+
-+ kfree(info->screen_base);
-+
-+ dev_set_drvdata(dev, NULL);
-+ framebuffer_release(info);
-+ return 0;
-+}
-+
-+
-+static struct platform_driver s1d15605fb_driver = {
-+ .remove = __exit_p(s1d15605fb_remove),
-+ .driver = {
-+ .name = "s1d15605fb",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+
-+static int __init s1d15605fb_init(void)
-+{
-+ return platform_driver_probe(&s1d15605fb_driver, s1d15605fb_probe);
-+}
-+
-+
-+static void __exit s1d15605fb_exit(void)
-+{
-+ platform_driver_unregister(&s1d15605fb_driver);
-+}
-+
-+
-+module_init(s1d15605fb_init);
-+module_exit(s1d15605fb_exit);
-+
-+
-+MODULE_AUTHOR("KwikByte");
-+MODULE_DESCRIPTION("Epson S1D15605 LCD Controller framebuffer driver");
-+MODULE_LICENSE("GPL");
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -66,6 +66,14 @@ config AT91RM9200_WATCHDOG
- Watchdog timer embedded into AT91RM9200 chips. This will reboot your
- system when the timeout is reached.
-
-+config AT91SAM9_WATCHDOG
-+ tristate "AT91SAM9 watchdog"
-+ depends on ARCH_AT91 && !ARCH_AT91RM9200
-+ select WATCHDOG_NOWAYOUT
-+ help
-+ Watchdog timer embedded into AT91SAM9 chips. This will reboot your
-+ system when the timeout is reached.
-+
- config 21285_WATCHDOG
- tristate "DC21285 watchdog"
- depends on FOOTBRIDGE
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -26,6 +26,7 @@ obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.
-
- # ARM Architecture
- obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
-+obj-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o
- obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
- obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
- obj-$(CONFIG_977_WATCHDOG) += wdt977.o
---- /dev/null
-+++ b/drivers/watchdog/at91sam9_wdt.c
-@@ -0,0 +1,259 @@
-+/*
-+ * Watchdog driver for Atmel AT91SAM9x processors.
-+ *
-+ * Copyright (C) 2007 Renaud CERRATO r.cerrato@til-technologies.fr
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+/*
-+ * The Watchdog Timer Mode Register can be only written to once. If the
-+ * timeout need to be set from Linux, be sure that the bootstrap or the
-+ * bootloader doesn't write to this register.
-+ */
-+
-+#include <linux/errno.h>
-+#include <linux/fs.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/miscdevice.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/platform_device.h>
-+#include <linux/types.h>
-+#include <linux/watchdog.h>
-+#include <linux/bitops.h>
-+#include <linux/uaccess.h>
-+
-+#include <asm/arch/at91_wdt.h>
-+
-+
-+#define WDT_MAX_TIME 16 /* seconds */
-+
-+static int wdt_timeout = -1; /* invalid */
-+
-+module_param(wdt_timeout, int, 0);
-+MODULE_PARM_DESC(wdt_timeout, "Watchdog time in seconds. (default = disabled)");
-+
-+
-+static unsigned long at91wdt_busy;
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Reload the watchdog timer. (ie, pat the watchdog)
-+ */
-+static void inline at91_wdt_reload(void)
-+{
-+ at91_sys_write(AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT);
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Watchdog device is opened, and watchdog starts running.
-+ */
-+static int at91_wdt_open(struct inode *inode, struct file *file)
-+{
-+ if (test_and_set_bit(0, &at91wdt_busy))
-+ return -EBUSY;
-+
-+ return nonseekable_open(inode, file);
-+}
-+
-+/*
-+ * Close the watchdog device.
-+ */
-+static int at91_wdt_close(struct inode *inode, struct file *file)
-+{
-+ clear_bit(0, &at91wdt_busy);
-+ return 0;
-+}
-+
-+/*
-+ * Change the watchdog time interval.
-+ */
-+static int at91_wdt_settimeout(int new_time)
-+{
-+ unsigned int reg, mr;
-+ /*
-+ * All counting occurs at SLOW_CLOCK / 128 = 256 Hz
-+ *
-+ * Since WDV is a 12-bit counter, the maximum period is
-+ * 4096 / 256 = 16 seconds.
-+ */
-+ if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
-+ return -EINVAL;
-+
-+ wdt_timeout = new_time;
-+
-+ /* Program the Watchdog */
-+ reg = AT91_WDT_WDRSTEN /* causes watchdog reset */
-+ | AT91_WDT_WDRPROC /* causes processor reset */
-+ | AT91_WDT_WDDBGHLT /* disabled in debug mode */
-+ | AT91_WDT_WDD /* restart at any time */
-+ | (((wdt_timeout * 256) - 1) & AT91_WDT_WDV); /* timer value */
-+ at91_sys_write(AT91_WDT_MR, reg);
-+
-+ /* Check if watchdog could be programmed */
-+ mr = at91_sys_read(AT91_WDT_MR);
-+ if (mr != reg) {
-+ printk(KERN_ERR "at91sam9_wdt: Watchdog register already programmed.\n");
-+ return -EIO;
-+ }
-+
-+ at91_wdt_reload();
-+
-+ printk(KERN_INFO "AT91SAM9 Watchdog enabled (%d seconds, nowayout)\n", wdt_timeout);
-+ return 0;
-+}
-+
-+static struct watchdog_info at91_wdt_info = {
-+ .identity = "at91sam9 watchdog",
-+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
-+};
-+
-+/*
-+ * Handle commands from user-space.
-+ */
-+static int at91_wdt_ioctl(struct inode *inode, struct file *file,
-+ unsigned int cmd, unsigned long arg)
-+{
-+ void __user *argp = (void __user *)arg;
-+ int __user *p = argp;
-+ int new_value, err;
-+
-+ switch (cmd) {
-+ case WDIOC_KEEPALIVE:
-+ at91_wdt_reload(); /* pat the watchdog */
-+ return 0;
-+
-+ case WDIOC_GETSUPPORT:
-+ return copy_to_user(argp, &at91_wdt_info, sizeof(at91_wdt_info)) ? -EFAULT : 0;
-+
-+ case WDIOC_SETTIMEOUT:
-+ if (get_user(new_value, p))
-+ return -EFAULT;
-+
-+ err = at91_wdt_settimeout(new_value);
-+ if (err)
-+ return err;
-+
-+ return put_user(wdt_timeout, p); /* return current value */
-+
-+ case WDIOC_GETTIMEOUT:
-+ return put_user(wdt_timeout, p);
-+
-+ case WDIOC_GETSTATUS:
-+ case WDIOC_GETBOOTSTATUS:
-+ return put_user(0, p);
-+ }
-+ return -ENOTTY;
-+}
-+
-+/*
-+ * Pat the watchdog whenever device is written to.
-+ */
-+static ssize_t at91_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
-+{
-+ at91_wdt_reload(); /* pat the watchdog */
-+ return len;
-+}
-+
-+/* ......................................................................... */
-+
-+static const struct file_operations at91wdt_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .ioctl = at91_wdt_ioctl,
-+ .open = at91_wdt_open,
-+ .release = at91_wdt_close,
-+ .write = at91_wdt_write,
-+};
-+
-+static struct miscdevice at91wdt_miscdev = {
-+ .minor = WATCHDOG_MINOR,
-+ .name = "watchdog",
-+ .fops = &at91wdt_fops,
-+};
-+
-+static int __init at91wdt_probe(struct platform_device *pdev)
-+{
-+ int res;
-+
-+ if (at91wdt_miscdev.parent)
-+ return -EBUSY;
-+ at91wdt_miscdev.parent = &pdev->dev;
-+
-+ res = misc_register(&at91wdt_miscdev);
-+ if (res)
-+ return res;
-+
-+ /* Set watchdog */
-+ if (at91_wdt_settimeout(wdt_timeout) == -EINVAL) {
-+ pr_info("at91sam9_wdt: invalid timeout (must be between 1 and %d)\n", WDT_MAX_TIME);
-+ return 0;
-+ }
-+
-+ return 0;
-+}
-+
-+static int __exit at91wdt_remove(struct platform_device *pdev)
-+{
-+ int res;
-+
-+ res = misc_deregister(&at91wdt_miscdev);
-+ if (!res)
-+ at91wdt_miscdev.parent = NULL;
-+
-+ return res;
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int at91wdt_suspend(struct platform_device *pdev, pm_message_t message)
-+{
-+ return 0;
-+}
-+
-+static int at91wdt_resume(struct platform_device *pdev)
-+{
-+ return 0;
-+}
-+
-+#else
-+#define at91wdt_suspend NULL
-+#define at91wdt_resume NULL
-+#endif
-+
-+static struct platform_driver at91wdt_driver = {
-+ .remove = __exit_p(at91wdt_remove),
-+ .suspend = at91wdt_suspend,
-+ .resume = at91wdt_resume,
-+ .driver = {
-+ .name = "at91_wdt",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init at91sam_wdt_init(void)
-+{
-+ return platform_driver_probe(&at91wdt_driver, at91wdt_probe);
-+}
-+
-+static void __exit at91sam_wdt_exit(void)
-+{
-+ platform_driver_unregister(&at91wdt_driver);
-+}
-+
-+module_init(at91sam_wdt_init);
-+module_exit(at91sam_wdt_exit);
-+
-+MODULE_AUTHOR("Renaud CERRATO");
-+MODULE_DESCRIPTION("Watchdog driver for Atmel AT91SAM9x processors");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-+MODULE_ALIAS("platform:at91_wdt");
---- a/include/asm-arm/arch-at91/at91_ecc.h
-+++ b/include/asm-arm/arch-at91/at91_ecc.h
-@@ -1,6 +1,9 @@
- /*
- * include/asm-arm/arch-at91/at91_ecc.h
- *
-+ * Copyright (C) 2007 Andrew Victor
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
- * Error Corrected Code Controller (ECC) - System peripherals regsters.
- * Based on AT91SAM9260 datasheet revision B.
- *
-@@ -13,26 +16,26 @@
- #ifndef AT91_ECC_H
- #define AT91_ECC_H
-
--#define AT91_ECC_CR (AT91_ECC + 0x00) /* Control register */
-+#define AT91_ECC_CR 0x00 /* Control register */
- #define AT91_ECC_RST (1 << 0) /* Reset parity */
-
--#define AT91_ECC_MR (AT91_ECC + 0x04) /* Mode register */
-+#define AT91_ECC_MR 0x04 /* Mode register */
- #define AT91_ECC_PAGESIZE (3 << 0) /* Page Size */
- #define AT91_ECC_PAGESIZE_528 (0)
- #define AT91_ECC_PAGESIZE_1056 (1)
- #define AT91_ECC_PAGESIZE_2112 (2)
- #define AT91_ECC_PAGESIZE_4224 (3)
-
--#define AT91_ECC_SR (AT91_ECC + 0x08) /* Status register */
-+#define AT91_ECC_SR 0x08 /* Status register */
- #define AT91_ECC_RECERR (1 << 0) /* Recoverable Error */
- #define AT91_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */
- #define AT91_ECC_MULERR (1 << 2) /* Multiple Errors */
-
--#define AT91_ECC_PR (AT91_ECC + 0x0c) /* Parity register */
-+#define AT91_ECC_PR 0x0c /* Parity register */
- #define AT91_ECC_BITADDR (0xf << 0) /* Bit Error Address */
- #define AT91_ECC_WORDADDR (0xfff << 4) /* Word Error Address */
-
--#define AT91_ECC_NPR (AT91_ECC + 0x10) /* NParity register */
-+#define AT91_ECC_NPR 0x10 /* NParity register */
- #define AT91_ECC_NPARITY (0xffff << 0) /* NParity */
-
- #endif
---- a/include/asm-arm/arch-at91/at91_pit.h
-+++ b/include/asm-arm/arch-at91/at91_pit.h
-@@ -1,6 +1,9 @@
- /*
- * include/asm-arm/arch-at91/at91_pit.h
- *
-+ * Copyright (C) 2007 Andrew Victor
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
- * Periodic Interval Timer (PIT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
---- a/include/asm-arm/arch-at91/at91_pmc.h
-+++ b/include/asm-arm/arch-at91/at91_pmc.h
-@@ -23,6 +23,7 @@
- #define AT91_PMC_PCK (1 << 0) /* Processor Clock */
- #define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
- #define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-+#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [AT91CAP9 revC only] */
- #define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
- #define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
- #define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */
-@@ -39,10 +40,14 @@
- #define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
-
- #define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */
-+#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */
-+#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */
-+#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */
-+#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */
-
- #define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
- #define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
--#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */
-+#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */
- #define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
-
- #define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */
-@@ -56,6 +61,7 @@
- #define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
- #define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */
- #define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */
-+#define AT91CAP9_PMC_USBDIV (0xf << 28) /* USB Divisor (PLLB only) [AT91CAP9 revC only] */
- #define AT91_PMC_USBDIV_1 (0 << 28)
- #define AT91_PMC_USBDIV_2 (1 << 28)
- #define AT91_PMC_USBDIV_4 (2 << 28)
-@@ -76,10 +82,13 @@
- #define AT91_PMC_PRES_32 (5 << 2)
- #define AT91_PMC_PRES_64 (6 << 2)
- #define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */
--#define AT91_PMC_MDIV_1 (0 << 8)
--#define AT91_PMC_MDIV_2 (1 << 8)
--#define AT91_PMC_MDIV_3 (2 << 8)
--#define AT91_PMC_MDIV_4 (3 << 8)
-+#define AT91RM9200_PMC_MDIV_1 (0 << 8) /* [AT91RM9200 only] */
-+#define AT91RM9200_PMC_MDIV_2 (1 << 8)
-+#define AT91RM9200_PMC_MDIV_3 (2 << 8)
-+#define AT91RM9200_PMC_MDIV_4 (3 << 8)
-+#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */
-+#define AT91SAM9_PMC_MDIV_2 (1 << 8)
-+#define AT91SAM9_PMC_MDIV_4 (2 << 8)
-
- #define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */
-
-@@ -90,10 +99,17 @@
- #define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
- #define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
- #define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
-+#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [AT91CAP9 only] */
-+#define AT91_PMC_OSCSEL (1 << 7) /* Slow Clock Oscillator [AT91CAP9 revC only] */
- #define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
- #define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
- #define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
- #define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */
- #define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */
-
-+#define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Protect Register [AT91CAP9 revC only] */
-+#define AT91_PMC_PROTKEY 0x504d4301 /* Activation Code */
-+
-+#define AT91_PMC_VER (AT91_PMC + 0xfc) /* PMC Module Version [AT91CAP9 only] */
-+
- #endif
---- a/include/asm-arm/arch-at91/at91_rstc.h
-+++ b/include/asm-arm/arch-at91/at91_rstc.h
-@@ -1,6 +1,9 @@
- /*
- * include/asm-arm/arch-at91/at91_rstc.h
- *
-+ * Copyright (C) 2007 Andrew Victor
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
- * Reset Controller (RSTC) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
---- a/include/asm-arm/arch-at91/at91_rtt.h
-+++ b/include/asm-arm/arch-at91/at91_rtt.h
-@@ -1,6 +1,9 @@
- /*
- * include/asm-arm/arch-at91/at91_rtt.h
- *
-+ * Copyright (C) 2007 Andrew Victor
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
- * Real-time Timer (RTT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
---- a/include/asm-arm/arch-at91/at91_shdwc.h
-+++ b/include/asm-arm/arch-at91/at91_shdwc.h
-@@ -1,6 +1,9 @@
- /*
- * include/asm-arm/arch-at91/at91_shdwc.h
- *
-+ * Copyright (C) 2007 Andrew Victor
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
- * Shutdown Controller (SHDWC) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
-@@ -24,10 +27,12 @@
- #define AT91_SHDW_WKMODE0_LOW 2
- #define AT91_SHDW_WKMODE0_ANYLEVEL 3
- #define AT91_SHDW_CPTWK0 (0xf << 4) /* Counter On Wake Up 0 */
-+#define AT91_SHDW_CPTWK0_(x) ((x) << 4)
- #define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */
-
- #define AT91_SHDW_SR (AT91_SHDWC + 0x08) /* Shut Down Status Register */
- #define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */
- #define AT91_SHDW_RTTWK (1 << 16) /* Real-time Timer Wake-up */
-+#define AT91_SHDW_RTCWK (1 << 17) /* Real-time Clock Wake-up [SAM9RL] */
-
- #endif
---- /dev/null
-+++ b/include/asm-arm/arch-at91/at91_tsc.h
-@@ -0,0 +1,76 @@
-+/*
-+ * include/asm-arm/arch-at91/at91_tsc.h
-+ *
-+ * Copyright (C) 2008 Andrew Victor
-+ *
-+ * Touch Screen ADC Controller (TSC)
-+ * Based on AT91SAM9RL64 preliminary draft datasheet.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef AT91_TSC_H
-+#define AT91_TSC_H
-+
-+#define AT91_TSADCC_CR 0x00 /* Control register */
-+#define AT91_TSADCC_SWRST (1 << 0) /* Software Reset*/
-+#define AT91_TSADCC_START (1 << 1) /* Start conversion */
-+
-+#define AT91_TSADCC_MR 0x04 /* Mode register */
-+#define AT91_TSADCC_TSAMOD (3 << 0) /* ADC mode */
-+#define AT91_TSADCC_LOWRES (1 << 4) /* Resolution selection */
-+#define AT91_TSADCC_SLEEP (1 << 5) /* Sleep mode */
-+#define AT91_TSADCC_PENDET (1 << 6) /* Pen Detect selection */
-+#define AT91_TSADCC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */
-+#define AT91_TSADCC_STARTUP (0x7f << 16) /* Start Up time */
-+#define AT91_TSADCC_SHTIM (0xf << 24) /* Sample & Hold time */
-+#define AT91_TSADCC_PENDBC (0xf << 28) /* Pen Detect debouncing time */
-+
-+#define AT91_TSADCC_TRGR 0x08 /* Trigger register */
-+#define AT91_TSADCC_TRGMOD (7 << 0) /* Trigger mode */
-+#define AT91_TSADCC_TRGMOD_NONE (0 << 0)
-+#define AT91_TSADCC_TRGMOD_EXT_RISING (1 << 0)
-+#define AT91_TSADCC_TRGMOD_EXT_FALLING (2 << 0)
-+#define AT91_TSADCC_TRGMOD_EXT_ANY (3 << 0)
-+#define AT91_TSADCC_TRGMOD_PENDET (4 << 0)
-+#define AT91_TSADCC_TRGMOD_PERIOD (5 << 0)
-+#define AT91_TSADCC_TRGMOD_CONTINUOUS (6 << 0)
-+#define AT91_TSADCC_TRGPER (0xffff << 16) /* Trigger period */
-+
-+#define AT91_TSADCC_TSR 0x0C /* Touch Screen register */
-+#define AT91_TSADCC_TSFREQ (0xf << 0) /* TS Frequency in Interleaved mode */
-+#define AT91_TSADCC_TSSHTIM (0xf << 24) /* Sample & Hold time */
-+
-+#define AT91_TSADCC_CHER 0x10 /* Channel Enable register */
-+#define AT91_TSADCC_CHDR 0x14 /* Channel Disable register */
-+#define AT91_TSADCC_CHSR 0x18 /* Channel Status register */
-+#define AT91_TSADCC_CH(n) (1 << (n)) /* Channel number */
-+
-+#define AT91_TSADCC_SR 0x1C /* Status register */
-+#define AT91_TSADCC_EOC(n) (1 << ((n)+0)) /* End of conversion for channel N */
-+#define AT91_TSADCC_OVRE(n) (1 << ((n)+8)) /* Overrun error for channel N */
-+#define AT91_TSADCC_DRDY (1 << 16) /* Data Ready */
-+#define AT91_TSADCC_GOVRE (1 << 17) /* General Overrun Error */
-+#define AT91_TSADCC_ENDRX (1 << 18) /* End of RX Buffer */
-+#define AT91_TSADCC_RXBUFF (1 << 19) /* TX Buffer full */
-+#define AT91_TSADCC_PENCNT (1 << 20) /* Pen contact */
-+#define AT91_TSADCC_NOCNT (1 << 21) /* No contact */
-+
-+#define AT91_TSADCC_LCDR 0x20 /* Last Converted Data register */
-+#define AT91_TSADCC_DATA (0x3ff << 0) /* Channel data */
-+
-+#define AT91_TSADCC_IER 0x24 /* Interrupt Enable register */
-+#define AT91_TSADCC_IDR 0x28 /* Interrupt Disable register */
-+#define AT91_TSADCC_IMR 0x2C /* Interrupt Mask register */
-+#define AT91_TSADCC_CDR0 0x30 /* Channel Data 0 */
-+#define AT91_TSADCC_CDR1 0x34 /* Channel Data 1 */
-+#define AT91_TSADCC_CDR2 0x38 /* Channel Data 2 */
-+#define AT91_TSADCC_CDR3 0x3C /* Channel Data 3 */
-+#define AT91_TSADCC_CDR4 0x40 /* Channel Data 4 */
-+#define AT91_TSADCC_CDR5 0x44 /* Channel Data 5 */
-+
-+#endif
-+
---- a/include/asm-arm/arch-at91/at91_wdt.h
-+++ b/include/asm-arm/arch-at91/at91_wdt.h
-@@ -1,6 +1,9 @@
- /*
- * include/asm-arm/arch-at91/at91_wdt.h
- *
-+ * Copyright (C) 2007 Andrew Victor
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
- * Watchdog Timer (WDT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
---- a/include/asm-arm/arch-at91/at91cap9.h
-+++ b/include/asm-arm/arch-at91/at91cap9.h
-@@ -101,7 +101,10 @@
- #define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
- #define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
- #define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
--#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
-+#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS)
-+#define AT91_GPBR (cpu_is_at91cap9_revB() ? \
-+ (0xfffffd50 - AT91_BASE_SYS) : \
-+ (0xfffffd60 - AT91_BASE_SYS))
-
- #define AT91_USART0 AT91CAP9_BASE_US0
- #define AT91_USART1 AT91CAP9_BASE_US1
-@@ -118,7 +121,7 @@
- #define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */
-
- #define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */
--#define AT91CAP9_UDPHS_BASE 0x00600000 /* USB High Speed Device Port */
-+#define AT91CAP9_UDPHS_FIFO 0x00600000 /* USB High Speed Device Port */
- #define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */
-
- #define CONFIG_DRAM_BASE AT91_CHIPSELECT_6
---- /dev/null
-+++ b/include/asm-arm/arch-at91/at91cap9_ddrsdr.h
-@@ -0,0 +1,102 @@
-+/*
-+ * include/asm-arm/arch-at91/at91cap9_ddrsdr.h
-+ *
-+ * (C) 2008 Andrew Victor
-+ *
-+ * DDR/SDR Controller (DDRSDRC) - System peripherals registers.
-+ * Based on AT91CAP9 datasheet revision B.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91CAP9_DDRSDR_H
-+#define AT91CAP9_DDRSDR_H
-+
-+#define AT91_DDRSDRC_MR (AT91_DDRSDRC + 0x00) /* Mode Register */
-+#define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */
-+#define AT91_DDRSDRC_MODE_NORMAL 0
-+#define AT91_DDRSDRC_MODE_NOP 1
-+#define AT91_DDRSDRC_MODE_PRECHARGE 2
-+#define AT91_DDRSDRC_MODE_LMR 3
-+#define AT91_DDRSDRC_MODE_REFRESH 4
-+#define AT91_DDRSDRC_MODE_EXT_LMR 5
-+#define AT91_DDRSDRC_MODE_DEEP 6
-+
-+#define AT91_DDRSDRC_RTR (AT91_DDRSDRC + 0x04) /* Refresh Timer Register */
-+#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */
-+
-+#define AT91_DDRSDRC_CR (AT91_DDRSDRC + 0x08) /* Configuration Register */
-+#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */
-+#define AT91_DDRSDRC_NC_SDR8 (0 << 0)
-+#define AT91_DDRSDRC_NC_SDR9 (1 << 0)
-+#define AT91_DDRSDRC_NC_SDR10 (2 << 0)
-+#define AT91_DDRSDRC_NC_SDR11 (3 << 0)
-+#define AT91_DDRSDRC_NC_DDR9 (0 << 0)
-+#define AT91_DDRSDRC_NC_DDR10 (1 << 0)
-+#define AT91_DDRSDRC_NC_DDR11 (2 << 0)
-+#define AT91_DDRSDRC_NC_DDR12 (3 << 0)
-+#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */
-+#define AT91_DDRSDRC_NR_11 (0 << 2)
-+#define AT91_DDRSDRC_NR_12 (1 << 2)
-+#define AT91_DDRSDRC_NR_13 (2 << 2)
-+#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */
-+#define AT91_DDRSDRC_CAS_2 (2 << 4)
-+#define AT91_DDRSDRC_CAS_3 (3 << 4)
-+#define AT91_DDRSDRC_CAS_25 (6 << 4)
-+#define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */
-+#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */
-+
-+#define AT91_DDRSDRC_T0PR (AT91_DDRSDRC + 0x0C) /* Timing 0 Register */
-+#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */
-+#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */
-+#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */
-+#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */
-+#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */
-+#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */
-+#define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */
-+#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */
-+
-+#define AT91_DDRSDRC_T1PR (AT91_DDRSDRC + 0x10) /* Timing 1 Register */
-+#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */
-+#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */
-+#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */
-+#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */
-+
-+#define AT91_DDRSDRC_LPR (AT91_DDRSDRC + 0x18) /* Low Power Register */
-+#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */
-+#define AT91_DDRSDRC_LPCB_DISABLE 0
-+#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1
-+#define AT91_DDRSDRC_LPCB_POWER_DOWN 2
-+#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3
-+#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */
-+#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */
-+#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
-+#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */
-+#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
-+#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12)
-+#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12)
-+#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12)
-+
-+#define AT91_DDRSDRC_MDR (AT91_DDRSDRC + 0x1C) /* Memory Device Register */
-+#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */
-+#define AT91_DDRSDRC_MD_SDR 0
-+#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
-+#define AT91_DDRSDRC_MD_DDR 2
-+#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3
-+
-+#define AT91_DDRSDRC_DLLR (AT91_DDRSDRC + 0x20) /* DLL Information Register */
-+#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */
-+#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */
-+#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */
-+#define AT91_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */
-+#define AT91_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */
-+#define AT91_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */
-+#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */
-+#define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */
-+#define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */
-+
-+
-+#endif
---- a/include/asm-arm/arch-at91/at91cap9_matrix.h
-+++ b/include/asm-arm/arch-at91/at91cap9_matrix.h
-@@ -106,6 +106,11 @@
- #define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */
- #define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */
-
-+#define AT91_MATRIX_UDPHS (AT91_MATRIX + 0x118) /* USBHS Special Function Register [AT91CAP9 only] */
-+#define AT91_MATRIX_SELECT_UDPHS (0 << 31) /* select High Speed UDP */
-+#define AT91_MATRIX_SELECT_UDP (1 << 31) /* select standard UDP */
-+#define AT91_MATRIX_UDPHS_BYPASS_LOCK (1 << 30) /* bypass lock bit */
-+
- #define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
- #define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
- #define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
---- a/include/asm-arm/arch-at91/at91sam9260_matrix.h
-+++ b/include/asm-arm/arch-at91/at91sam9260_matrix.h
-@@ -1,6 +1,8 @@
- /*
- * include/asm-arm/arch-at91/at91sam9260_matrix.h
- *
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9260 datasheet revision B.
- *
---- a/include/asm-arm/arch-at91/at91sam9261_matrix.h
-+++ b/include/asm-arm/arch-at91/at91sam9261_matrix.h
-@@ -1,6 +1,8 @@
- /*
- * include/asm-arm/arch-at91/at91sam9261_matrix.h
- *
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
---- a/include/asm-arm/arch-at91/at91sam926x_mc.h
-+++ /dev/null
-@@ -1,141 +0,0 @@
--/*
-- * include/asm-arm/arch-at91/at91sam926x_mc.h
-- *
-- * Memory Controllers (SMC, SDRAMC) - System peripherals registers.
-- * Based on AT91SAM9261 datasheet revision D.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- */
--
--#ifndef AT91SAM926x_MC_H
--#define AT91SAM926x_MC_H
--
--/* SDRAM Controller (SDRAMC) registers */
--#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */
--#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
--#define AT91_SDRAMC_MODE_NORMAL 0
--#define AT91_SDRAMC_MODE_NOP 1
--#define AT91_SDRAMC_MODE_PRECHARGE 2
--#define AT91_SDRAMC_MODE_LMR 3
--#define AT91_SDRAMC_MODE_REFRESH 4
--#define AT91_SDRAMC_MODE_EXT_LMR 5
--#define AT91_SDRAMC_MODE_DEEP 6
--
--#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */
--#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */
--
--#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */
--#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
--#define AT91_SDRAMC_NC_8 (0 << 0)
--#define AT91_SDRAMC_NC_9 (1 << 0)
--#define AT91_SDRAMC_NC_10 (2 << 0)
--#define AT91_SDRAMC_NC_11 (3 << 0)
--#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
--#define AT91_SDRAMC_NR_11 (0 << 2)
--#define AT91_SDRAMC_NR_12 (1 << 2)
--#define AT91_SDRAMC_NR_13 (2 << 2)
--#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
--#define AT91_SDRAMC_NB_2 (0 << 4)
--#define AT91_SDRAMC_NB_4 (1 << 4)
--#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
--#define AT91_SDRAMC_CAS_1 (1 << 5)
--#define AT91_SDRAMC_CAS_2 (2 << 5)
--#define AT91_SDRAMC_CAS_3 (3 << 5)
--#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */
--#define AT91_SDRAMC_DBW_32 (0 << 7)
--#define AT91_SDRAMC_DBW_16 (1 << 7)
--#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */
--#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */
--#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */
--#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */
--#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */
--#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */
--
--#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */
--#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */
--#define AT91_SDRAMC_LPCB_DISABLE 0
--#define AT91_SDRAMC_LPCB_SELF_REFRESH 1
--#define AT91_SDRAMC_LPCB_POWER_DOWN 2
--#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3
--#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */
--#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
--#define AT91_SDRAMC_DS (3 << 10) /* Drive Strenght */
--#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
--#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12)
--#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12)
--#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12)
--
--#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */
--#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */
--#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */
--#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */
--#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */
--
--#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */
--#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */
--#define AT91_SDRAMC_MD_SDRAM 0
--#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1
--
--
--/* Static Memory Controller (SMC) registers */
--#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
--#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
--#define AT91_SMC_NWESETUP_(x) ((x) << 0)
--#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */
--#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8)
--#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */
--#define AT91_SMC_NRDSETUP_(x) ((x) << 16)
--#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */
--#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24)
--
--#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
--#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */
--#define AT91_SMC_NWEPULSE_(x) ((x) << 0)
--#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */
--#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
--#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */
--#define AT91_SMC_NRDPULSE_(x) ((x) << 16)
--#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */
--#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
--
--#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
--#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */
--#define AT91_SMC_NWECYCLE_(x) ((x) << 0)
--#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */
--#define AT91_SMC_NRDCYCLE_(x) ((x) << 16)
--
--#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
--#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
--#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
--#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */
--#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
--#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
--#define AT91_SMC_EXNWMODE_READY (3 << 4)
--#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */
--#define AT91_SMC_BAT_SELECT (0 << 8)
--#define AT91_SMC_BAT_WRITE (1 << 8)
--#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */
--#define AT91_SMC_DBW_8 (0 << 12)
--#define AT91_SMC_DBW_16 (1 << 12)
--#define AT91_SMC_DBW_32 (2 << 12)
--#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */
--#define AT91_SMC_TDF_(x) ((x) << 16)
--#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */
--#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */
--#define AT91_SMC_PS (3 << 28) /* Page Size */
--#define AT91_SMC_PS_4 (0 << 28)
--#define AT91_SMC_PS_8 (1 << 28)
--#define AT91_SMC_PS_16 (2 << 28)
--#define AT91_SMC_PS_32 (3 << 28)
--
--#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */
--#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
--#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
--#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
--#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
--#endif
--
--#endif
---- /dev/null
-+++ b/include/asm-arm/arch-at91/at91sam9_sdramc.h
-@@ -0,0 +1,86 @@
-+/*
-+ * include/asm-arm/arch-at91/at91sam9_sdramc.h
-+ *
-+ * Copyright (C) 2007 Andrew Victor
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
-+ * SDRAM Controllers (SDRAMC) - System peripherals registers.
-+ * Based on AT91SAM9261 datasheet revision D.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91SAM9_SDRAMC_H
-+#define AT91SAM9_SDRAMC_H
-+
-+/* SDRAM Controller (SDRAMC) registers */
-+#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */
-+#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
-+#define AT91_SDRAMC_MODE_NORMAL 0
-+#define AT91_SDRAMC_MODE_NOP 1
-+#define AT91_SDRAMC_MODE_PRECHARGE 2
-+#define AT91_SDRAMC_MODE_LMR 3
-+#define AT91_SDRAMC_MODE_REFRESH 4
-+#define AT91_SDRAMC_MODE_EXT_LMR 5
-+#define AT91_SDRAMC_MODE_DEEP 6
-+
-+#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */
-+#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */
-+
-+#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */
-+#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
-+#define AT91_SDRAMC_NC_8 (0 << 0)
-+#define AT91_SDRAMC_NC_9 (1 << 0)
-+#define AT91_SDRAMC_NC_10 (2 << 0)
-+#define AT91_SDRAMC_NC_11 (3 << 0)
-+#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
-+#define AT91_SDRAMC_NR_11 (0 << 2)
-+#define AT91_SDRAMC_NR_12 (1 << 2)
-+#define AT91_SDRAMC_NR_13 (2 << 2)
-+#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
-+#define AT91_SDRAMC_NB_2 (0 << 4)
-+#define AT91_SDRAMC_NB_4 (1 << 4)
-+#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
-+#define AT91_SDRAMC_CAS_1 (1 << 5)
-+#define AT91_SDRAMC_CAS_2 (2 << 5)
-+#define AT91_SDRAMC_CAS_3 (3 << 5)
-+#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */
-+#define AT91_SDRAMC_DBW_32 (0 << 7)
-+#define AT91_SDRAMC_DBW_16 (1 << 7)
-+#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */
-+#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */
-+#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */
-+#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */
-+#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */
-+#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */
-+
-+#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */
-+#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */
-+#define AT91_SDRAMC_LPCB_DISABLE 0
-+#define AT91_SDRAMC_LPCB_SELF_REFRESH 1
-+#define AT91_SDRAMC_LPCB_POWER_DOWN 2
-+#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3
-+#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */
-+#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
-+#define AT91_SDRAMC_DS (3 << 10) /* Drive Strength */
-+#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
-+#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12)
-+#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12)
-+#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12)
-+
-+#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */
-+#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */
-+#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */
-+#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */
-+#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */
-+
-+#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */
-+#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */
-+#define AT91_SDRAMC_MD_SDRAM 0
-+#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-at91/at91sam9_smc.h
-@@ -0,0 +1,76 @@
-+/*
-+ * include/asm-arm/arch-at91/at91sam9_smc.h
-+ *
-+ * Copyright (C) 2007 Andrew Victor
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
-+ * Static Memory Controllers (SMC) - System peripherals registers.
-+ * Based on AT91SAM9261 datasheet revision D.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91SAM9_SMC_H
-+#define AT91SAM9_SMC_H
-+
-+#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
-+#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
-+#define AT91_SMC_NWESETUP_(x) ((x) << 0)
-+#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */
-+#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8)
-+#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */
-+#define AT91_SMC_NRDSETUP_(x) ((x) << 16)
-+#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */
-+#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24)
-+
-+#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
-+#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */
-+#define AT91_SMC_NWEPULSE_(x) ((x) << 0)
-+#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */
-+#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
-+#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */
-+#define AT91_SMC_NRDPULSE_(x) ((x) << 16)
-+#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */
-+#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
-+
-+#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
-+#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */
-+#define AT91_SMC_NWECYCLE_(x) ((x) << 0)
-+#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */
-+#define AT91_SMC_NRDCYCLE_(x) ((x) << 16)
-+
-+#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
-+#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
-+#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
-+#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */
-+#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
-+#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
-+#define AT91_SMC_EXNWMODE_READY (3 << 4)
-+#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */
-+#define AT91_SMC_BAT_SELECT (0 << 8)
-+#define AT91_SMC_BAT_WRITE (1 << 8)
-+#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */
-+#define AT91_SMC_DBW_8 (0 << 12)
-+#define AT91_SMC_DBW_16 (1 << 12)
-+#define AT91_SMC_DBW_32 (2 << 12)
-+#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */
-+#define AT91_SMC_TDF_(x) ((x) << 16)
-+#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */
-+#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */
-+#define AT91_SMC_PS (3 << 28) /* Page Size */
-+#define AT91_SMC_PS_4 (0 << 28)
-+#define AT91_SMC_PS_8 (1 << 28)
-+#define AT91_SMC_PS_16 (2 << 28)
-+#define AT91_SMC_PS_32 (3 << 28)
-+
-+#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */
-+#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
-+#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
-+#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
-+#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
-+#endif
-+
-+#endif
---- a/include/asm-arm/arch-at91/at91sam9rl.h
-+++ b/include/asm-arm/arch-at91/at91sam9rl.h
-@@ -110,6 +110,6 @@
- #define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */
-
- #define AT91SAM9RL_LCDC_BASE 0x00500000 /* LCD Controller */
--#define AT91SAM9RL_UDPHS_BASE 0x00600000 /* USB Device HS controller */
-+#define AT91SAM9RL_UDPHS_FIFO 0x00600000 /* USB Device HS controller */
-
- #endif
---- a/include/asm-arm/arch-at91/board.h
-+++ b/include/asm-arm/arch-at91/board.h
-@@ -36,6 +36,7 @@
- #include <linux/i2c.h>
- #include <linux/leds.h>
- #include <linux/spi/spi.h>
-+#include <linux/usb/atmel_usba_udc.h>
-
- /* USB Device */
- struct at91_udc_data {
-@@ -45,6 +46,9 @@ struct at91_udc_data {
- };
- extern void __init at91_add_device_udc(struct at91_udc_data *data);
-
-+ /* USB High Speed Device */
-+extern void __init at91_add_device_usba(struct usba_platform_data *data);
-+
- /* Compact Flash */
- struct at91_cf_data {
- u8 irq_pin; /* I/O IRQ */
-@@ -158,6 +162,9 @@ extern void __init at91_add_device_ac97(
- /* ISI */
- extern void __init at91_add_device_isi(void);
-
-+ /* Touchscreen Controller */
-+extern void __init at91_add_device_tsadcc(void);
-+
- /* LEDs */
- extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
- extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
---- a/include/asm-arm/arch-at91/cpu.h
-+++ b/include/asm-arm/arch-at91/cpu.h
-@@ -48,6 +48,17 @@ static inline unsigned long at91_arch_id
- return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
- }
-
-+#ifdef CONFIG_ARCH_AT91CAP9
-+#include <asm/arch/at91_pmc.h>
-+
-+#define ARCH_REVISION_CAP9_B 0x399
-+#define ARCH_REVISION_CAP9_C 0x601
-+
-+static inline unsigned long at91cap9_rev_identify(void)
-+{
-+ return (at91_sys_read(AT91_PMC_VER));
-+}
-+#endif
-
- #ifdef CONFIG_ARCH_AT91RM9200
- #define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200)
-@@ -83,8 +94,12 @@ static inline unsigned long at91_arch_id
-
- #ifdef CONFIG_ARCH_AT91CAP9
- #define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9)
-+#define cpu_is_at91cap9_revB() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_B)
-+#define cpu_is_at91cap9_revC() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_C)
- #else
- #define cpu_is_at91cap9() (0)
-+#define cpu_is_at91cap9_revB() (0)
-+#define cpu_is_at91cap9_revC() (0)
- #endif
-
- /*
---- /dev/null
-+++ b/include/asm-arm/arch-at91/ics1523.h
-@@ -0,0 +1,154 @@
-+//*----------------------------------------------------------------------------
-+//* ATMEL Microcontroller Software Support - ROUSSET -
-+//*----------------------------------------------------------------------------
-+//* The software is delivered "AS IS" without warranty or condition of any
-+//* kind, either express, implied or statutory. This includes without
-+//* limitation any warranty or condition with respect to merchantability or
-+//* fitness for any particular purpose, or against the infringements of
-+//* intellectual property rights of others.
-+//*----------------------------------------------------------------------------
-+//* File Name : ics1523.h
-+//* Object : Clock Generator Prototyping File.
-+//*
-+//* 1.0 08/28/02 ED : Creation
-+//* 1.2 13/01/03 FB : Update on lib V3
-+//*----------------------------------------------------------------------------
-+
-+#ifndef ics1523_h
-+#define ics1523_h
-+
-+/*-------------------------------------------*/
-+/* ICS1523 TWI Serial Clock Definition */
-+/*-------------------------------------------*/
-+
-+#define ICS_MIN_CLOCK 100 /* Min Frequency Access Clock KHz */
-+#define ICS_MAX_CLOCK 400 /* Max Frequency Access Clock KHz */
-+#define ICS_TRANSFER_RATE ICS_MAX_CLOCK /* Transfer speed to apply */
-+
-+#define ICS_WRITE_CLK_PNB 30 /* TWCK Clock Periods required to write */
-+#define ICS_READ_CLK_PNB 40 /* TWCK Clock Periods required to read */
-+
-+/*-------------------------------------------*/
-+/* ICS1523 Write Operation Definition */
-+/*-------------------------------------------*/
-+
-+#define ICS1523_ACCESS_OK 0 /* OK */
-+#define ICS1523_ACCESS_ERROR -1 /* NOK */
-+
-+/*-------------------------------------------*/
-+/* ICS1523 Device Addresses Definition */
-+/*-------------------------------------------*/
-+
-+#define ICS_ADDR 0x26 /* Device Address */
-+
-+/*--------------------------------------------------*/
-+/* ICS1523 Registers Internal Addresses Definition */
-+/*--------------------------------------------------*/
-+
-+#define ICS_ICR 0x0 /* Input Control Register */
-+#define ICS_LCR 0x1 /* Loop Control Register */
-+#define ICS_FD0 0x2 /* PLL FeedBack Divider LSBs */
-+#define ICS_FD1 0x3 /* PLL FeedBack Divider MSBs */
-+#define ICS_DPAO 0x4 /* Dynamic Phase Aligner Offset */
-+#define ICS_DPAC 0x5 /* Dynamic Phase Aligner Resolution */
-+#define ICS_OE 0x6 /* Output Enables Register */
-+#define ICS_OD 0x7 /* Osc Divider Register */
-+#define ICS_SWRST 0x8 /* DPA & PLL Reset Register */
-+#define ICS_VID 0x10 /* Chip Version Register */
-+#define ICS_RID 0x11 /* Chip Revision Register */
-+#define ICS_SR 0x12 /* Status Register */
-+
-+/*------------------------------------------------------*/
-+/* ICS1523 Input Control Register Bits Definition */
-+/*------------------------------------------------------*/
-+
-+#define ICS_PDEN 0x1 /* Phase Detector Enable */
-+#define ICS_PDPOL 0x2 /* Phase Detector Enable Polarity */
-+#define ICS_REFPOL 0x4 /* External Reference Polarity */
-+#define ICS_FBKPOL 0x8 /* External Feedback Polarity */
-+#define ICS_FBKSEL 0x10 /* External Feedback Select */
-+#define ICS_FUNCSEL 0x20 /* Function Out Select */
-+#define ICS_ENPLS 0x40 /* Enable PLL Lock/Ref Status Output */
-+#define ICS_ENDLS 0x80 /* Enable DPA Lock/Ref Status Output */
-+
-+/*-----------------------------------------------------*/
-+/* ICS1523 Loop Control Register Bits Definition */
-+/*-----------------------------------------------------*/
-+
-+#define ICS_PFD 0x7 /* Phase Detector Gain */
-+#define ICS_PSD 0x30 /* Post-Scaler Divider */
-+
-+/*----------------------------------------------------*/
-+/* ICS1523 PLL FeedBack Divider LSBs Definition */
-+/*----------------------------------------------------*/
-+
-+#define ICS_FBDL 0xFF /* PLL FeedBack Divider LSBs */
-+
-+/*----------------------------------------------------*/
-+/* ICS1523 PLL FeedBack Divider MSBs Definition */
-+/*----------------------------------------------------*/
-+
-+#define ICS_FBDM 0xF /* PLL FeedBack Divider MSBs */
-+
-+/*------------------------------------------------------------*/
-+/* ICS1523 Dynamic Phase Aligner Offset Bits Definition */
-+/*------------------------------------------------------------*/
-+
-+#define ICS_DPAOS 0x2F /* Dynamic Phase Aligner Offset */
-+#define ICS_FILSEL 0x80 /* Loop Filter Select */
-+
-+/*----------------------------------------------------------------*/
-+/* ICS1523 Dynamic Phase Aligner Resolution Bits Definition */
-+/*----------------------------------------------------------------*/
-+
-+#define ICS_DPARES 0x3 /* Dynamic Phase Aligner Resolution */
-+#define ICS_MMREV 0xFC /* Metal Mask Revision Number */
-+
-+/*-------------------------------------------------------*/
-+/* ICS1523 Output Enables Register Bits Definition */
-+/*-------------------------------------------------------*/
-+
-+#define ICS_OEPCK 0x1 /* Output Enable for PECL PCLK Outputs */
-+#define ICS_OETCK 0x2 /* Output Enable for STTL CLK Output */
-+#define ICS_OEP2 0x4 /* Output Enable for PECL CLK/2 Outputs */
-+#define ICS_OET2 0x8 /* Output Enable for STTL CLK/2 Output */
-+#define ICS_OEF 0x10 /* Output Enable for STTL FUNC Output */
-+#define ICS_CLK2INV 0x20 /* CLK/2 Invert */
-+#define ICS_OSCL 0xC0 /* SSTL Clock Scaler */
-+
-+/*----------------------------------------------------*/
-+/* ICS1523 Osc Divider Register Bits Definition */
-+/*----------------------------------------------------*/
-+
-+#define ICS_OSCDIV 0x7F /* Oscillator Divider Modulus */
-+#define ICS_INSEL 0x80 /* Input Select */
-+
-+/*---------------------------------------------------*/
-+/* ICS1523 DPA & PLL Reset Register Definition */
-+/*---------------------------------------------------*/
-+
-+#define ICS_DPAR 0x0A /* DPA Reset Command */
-+#define ICS_PLLR 0x50 /* PLL Reset Command */
-+
-+/*------------------------------------------------*/
-+/* ICS1523 Chip Version Register Definition */
-+/*------------------------------------------------*/
-+
-+#define ICS_CHIPV 0xFF /* Chip Version */
-+
-+/*-------------------------------------------------*/
-+/* ICS1523 Chip Revision Register Definition */
-+/*-------------------------------------------------*/
-+
-+#define ICS_CHIPR 0xFF /* Chip Revision */
-+
-+/*------------------------------------------*/
-+/* ICS1523 Status Register Definition */
-+/*------------------------------------------*/
-+
-+#define ICS_DPALOCK 0x1 /* DPA Lock Status */
-+#define ICS_PLLLOCK 0x2 /* PLL Lock Status */
-+
-+int at91_ics1523_init(void);
-+
-+#endif /* ics1523_h */
---- /dev/null
-+++ b/include/asm-arm/arch-at91/spi.h
-@@ -0,0 +1,54 @@
-+/*
-+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200
-+ *
-+ * (c) SAN People (Pty) Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#ifndef AT91_LEGACY_SPI_H
-+#define AT91_LEGACY_SPI_H
-+
-+#define SPI_MAJOR 153 /* registered device number */
-+
-+#define DEFAULT_SPI_CLK 6000000
-+
-+
-+/* Maximum number of buffers in a single SPI transfer.
-+ * DataFlash uses maximum of 2
-+ * spidev interface supports up to 8.
-+ */
-+#define MAX_SPI_TRANSFERS 8
-+#define NR_SPI_DEVICES 4 /* number of devices on SPI bus */
-+
-+/*
-+ * Describes the buffers for a SPI transfer.
-+ * A transmit & receive buffer must be specified for each transfer
-+ */
-+struct spi_transfer_list {
-+ void* tx[MAX_SPI_TRANSFERS]; /* transmit */
-+ int txlen[MAX_SPI_TRANSFERS];
-+ void* rx[MAX_SPI_TRANSFERS]; /* receive */
-+ int rxlen[MAX_SPI_TRANSFERS];
-+ int nr_transfers; /* number of transfers */
-+ int curr; /* current transfer */
-+};
-+
-+struct spi_local {
-+ unsigned int pcs; /* Peripheral Chip Select value */
-+
-+ struct spi_transfer_list *xfers; /* current transfer list */
-+ dma_addr_t tx, rx; /* DMA address for current transfer */
-+ dma_addr_t txnext, rxnext; /* DMA address for next transfer */
-+};
-+
-+
-+/* Exported functions */
-+extern void spi_access_bus(short device);
-+extern void spi_release_bus(short device);
-+extern int spi_transfer(struct spi_transfer_list* list);
-+
-+#endif
---- a/include/asm-arm/arch-at91/timex.h
-+++ b/include/asm-arm/arch-at91/timex.h
-@@ -27,14 +27,29 @@
-
- #define CLOCK_TICK_RATE (AT91_SLOW_CLOCK)
-
--#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9261)
-+#elif defined(CONFIG_ARCH_AT91SAM9260)
-+
-+#if defined(CONFIG_MACH_USB_A9260) || defined(CONFIG_MACH_QIL_A9260)
-+#define AT91SAM9_MASTER_CLOCK 90000000
-+#else
-+#define AT91SAM9_MASTER_CLOCK 99300000
-+#endif
-+
-+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
-+
-+#elif defined(CONFIG_ARCH_AT91SAM9261)
-
- #define AT91SAM9_MASTER_CLOCK 99300000
- #define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
-
- #elif defined(CONFIG_ARCH_AT91SAM9263)
-
-+#if defined(CONFIG_MACH_USB_A9263)
-+#define AT91SAM9_MASTER_CLOCK 90000000
-+#else
- #define AT91SAM9_MASTER_CLOCK 99959500
-+#endif
-+
- #define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
-
- #elif defined(CONFIG_ARCH_AT91SAM9RL)
---- a/include/asm-arm/arch-ks8695/devices.h
-+++ b/include/asm-arm/arch-ks8695/devices.h
-@@ -18,6 +18,11 @@ extern void __init ks8695_add_device_wan
- extern void __init ks8695_add_device_lan(void);
- extern void __init ks8695_add_device_hpna(void);
-
-+ /* LEDs */
-+extern short ks8695_leds_cpu;
-+extern short ks8695_leds_timer;
-+extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led);
-+
- /* PCI */
- #define KS8695_MODE_PCI 0
- #define KS8695_MODE_MINIPCI 1
---- a/include/linux/clk.h
-+++ b/include/linux/clk.h
-@@ -121,4 +121,24 @@ int clk_set_parent(struct clk *clk, stru
- */
- struct clk *clk_get_parent(struct clk *clk);
-
-+/**
-+ * clk_must_disable - report whether a clock's users must disable it
-+ * @clk: one node in the clock tree
-+ *
-+ * This routine returns true only if the upcoming system state requires
-+ * disabling the specified clock.
-+ *
-+ * It's common for platform power states to constrain certain clocks (and
-+ * their descendants) to be unavailable, while other states allow that
-+ * clock to be active. A platform's power states often include an "all on"
-+ * mode; system wide sleep states like "standby" or "suspend-to-RAM"; and
-+ * operating states which sacrifice functionality for lower power usage.
-+ *
-+ * The constraint value is commonly tested in device driver suspend(), to
-+ * leave clocks active if they are needed for features like wakeup events.
-+ * On platforms that support reduced functionality operating states, the
-+ * constraint may also need to be tested during resume() and probe() calls.
-+ */
-+int clk_must_disable(struct clk *clk);
-+
- #endif
---- a/include/linux/i2c-id.h
-+++ b/include/linux/i2c-id.h
-@@ -131,6 +131,7 @@
-
- /* --- PCA 9564 based algorithms */
- #define I2C_HW_A_ISA 0x1a0000 /* generic ISA Bus interface card */
-+#define I2C_HW_A_PLAT 0x1a0001 /* generic platform_bus interface */
-
- /* --- PowerPC on-chip adapters */
- #define I2C_HW_OCP 0x120000 /* IBM on-chip I2C adapter */
---- /dev/null
-+++ b/include/linux/usb/atmel_usba_udc.h
-@@ -0,0 +1,23 @@
-+/*
-+* Platform data definitions for Atmel USBA gadget driver.
-+*/
-+#ifndef __LINUX_USB_USBA_H
-+#define __LINUX_USB_USBA_H
-+
-+struct usba_ep_data {
-+ char* name;
-+ int index;
-+ int fifo_size;
-+ int nr_banks;
-+ int can_dma;
-+ int can_isoc;
-+};
-+
-+struct usba_platform_data {
-+ int vbus_pin;
-+ int num_ep;
-+ struct usba_ep_data ep[0];
-+};
-+
-+#endif /* __LINUX_USB_USBA_H */
-+
---- a/include/video/atmel_lcdc.h
-+++ b/include/video/atmel_lcdc.h
-@@ -39,6 +39,7 @@ struct atmel_lcdfb_info {
- u8 bl_power;
- #endif
- bool lcdcon_is_backlight;
-+ u8 saved_lcdcon;
-
- u8 default_bpp;
- unsigned int default_lcdcon2;
---- a/sound/soc/at91/eti_b1_wm8731.c
-+++ b/sound/soc/at91/eti_b1_wm8731.c
-@@ -33,8 +33,7 @@
- #include <sound/soc.h>
- #include <sound/soc-dapm.h>
-
--#include <asm/arch/hardware.h>
--#include <asm/arch/at91_pio.h>
-+#include <asm/hardware.h>
- #include <asm/arch/gpio.h>
-
- #include "../codecs/wm8731.h"
-@@ -47,13 +46,6 @@
- #define DBG(x...)
- #endif
-
--#define AT91_PIO_TF1 (1 << (AT91_PIN_PB6 - PIN_BASE) % 32)
--#define AT91_PIO_TK1 (1 << (AT91_PIN_PB7 - PIN_BASE) % 32)
--#define AT91_PIO_TD1 (1 << (AT91_PIN_PB8 - PIN_BASE) % 32)
--#define AT91_PIO_RD1 (1 << (AT91_PIN_PB9 - PIN_BASE) % 32)
--#define AT91_PIO_RK1 (1 << (AT91_PIN_PB10 - PIN_BASE) % 32)
--#define AT91_PIO_RF1 (1 << (AT91_PIN_PB11 - PIN_BASE) % 32)
--
- static struct clk *pck1_clk;
- static struct clk *pllb_clk;
-
-@@ -276,7 +268,6 @@ static struct platform_device *eti_b1_sn
- static int __init eti_b1_init(void)
- {
- int ret;
-- u32 ssc_pio_lines;
- struct at91_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data;
-
- if (!request_mem_region(AT91RM9200_BASE_SSC1, SZ_16K, "soc-audio")) {
-@@ -310,19 +301,12 @@ static int __init eti_b1_init(void)
- goto fail_io_unmap;
- }
-
-- ssc_pio_lines = AT91_PIO_TF1 | AT91_PIO_TK1 | AT91_PIO_TD1
-- | AT91_PIO_RD1 /* | AT91_PIO_RK1 */ | AT91_PIO_RF1;
--
-- /* Reset all PIO registers and assign lines to peripheral A */
-- at91_sys_write(AT91_PIOB + PIO_PDR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_ODR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_IFDR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_CODR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_IDR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_MDDR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_PUDR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_ASR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_OWDR, ssc_pio_lines);
-+ at91_set_A_periph(AT91_PIN_PB6, 0); /* TF1 */
-+ at91_set_A_periph(AT91_PIN_PB7, 0); /* TK1 */
-+ at91_set_A_periph(AT91_PIN_PB8, 0); /* TD1 */
-+ at91_set_A_periph(AT91_PIN_PB9, 0); /* RD1 */
-+/* at91_set_A_periph(AT91_PIN_PB10, 0);*/ /* RK1 */
-+ at91_set_A_periph(AT91_PIN_PB11, 0); /* RF1 */
-
- /*
- * Set PCK1 parent to PLLB and its rate to 12 Mhz.
---- a/sound/spi/at73c213.c
-+++ b/sound/spi/at73c213.c
-@@ -114,7 +114,11 @@ snd_at73c213_write_reg(struct snd_at73c2
- static struct snd_pcm_hardware snd_at73c213_playback_hw = {
- .info = SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER,
-+#ifdef __BIG_ENDIAN
- .formats = SNDRV_PCM_FMTBIT_S16_BE,
-+#else
-+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
-+#endif
- .rates = SNDRV_PCM_RATE_CONTINUOUS,
- .rate_min = 8000, /* Replaced by chip->bitrate later. */
- .rate_max = 50000, /* Replaced by chip->bitrate later. */
diff --git a/target/linux/at91/patches-2.6.25/001-vlink-machine.patch b/target/linux/at91/patches-2.6.25/001-vlink-machine.patch
deleted file mode 100644
index 76e3698..0000000
--- a/target/linux/at91/patches-2.6.25/001-vlink-machine.patch
+++ /dev/null
@@ -1,229 +0,0 @@
---- a/arch/arm/mach-at91/Kconfig
-+++ b/arch/arm/mach-at91/Kconfig
-@@ -151,6 +151,12 @@ config MACH_TT9200
- help
- Select this if you are using Toptech's TT9200 board.
-
-+config MACH_VLINK
-+ bool "Figment Design Labs VersaLink"
-+ depends on ARCH_AT91RM9200
-+ help
-+ Select this if you are using FDL's VersaLink board
-+
- endif
-
- # ----------------------------------------------------------
---- a/arch/arm/mach-at91/Makefile
-+++ b/arch/arm/mach-at91/Makefile
-@@ -29,6 +29,7 @@ obj-$(CONFIG_MACH_KB9200) += board-kb920
- obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
- obj-$(CONFIG_MACH_KAFA) += board-kafa.o
- obj-$(CONFIG_MACH_CHUB) += board-chub.o
-+obj-$(CONFIG_MACH_VLINK) += board-vlink.o
- obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o
- obj-$(CONFIG_MACH_HOMEMATIC) += board-homematic.o
- obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o
---- /dev/null
-+++ b/arch/arm/mach-at91/board-vlink.c
-@@ -0,0 +1,201 @@
-+/*
-+ * linux/arch/arm/mach-at91/board-vlink.c
-+ *
-+ * Copyright (C) 2005 SAN People
-+ * Copyright (C) 2006,2007 Guthrie Consulting
-+ *
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/mtd/physmap.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91rm9200_mc.h>
-+
-+#include "generic.h"
-+
-+
-+static void __init vlink_map_io(void)
-+{
-+ /* Initialize processor: 18.432 MHz crystal */
-+ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
-+
-+ /* Setup the LEDs */
-+ at91_init_leds(AT91_PIN_PC14, AT91_PIN_PC15);
-+
-+ /* Setup serial ports */
-+
-+ /* DBGU on ttyS0. (RX and TX only) */
-+ at91_register_uart(0, 0, 0);
-+
-+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DSR, DTR, DCD, RI) */
-+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS
-+ | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR
-+ | ATMEL_UART_DCD | ATMEL_UART_RI);
-+
-+ /* USART0 on ttys2. (Rx, Tx, CTS, RTS, DTR, DCD, RI) */
-+ at91_register_uart(AT91RM9200_ID_US0, 2, ATMEL_UART_CTS
-+ | ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
-+
-+ /* USART3 on ttyS3. (Rx, Tx, CTS, RTS, DTR, DCD, RI) */
-+ at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS
-+ | ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
-+
-+ /* USART2 on ttyS4. (Rx and Tx only) */
-+ at91_register_uart(AT91RM9200_ID_US2, 4, 0);
-+
-+ /* Console on ttyS0 (ie DBGU) */
-+ at91_set_serial_console(0);
-+}
-+
-+static void __init vlink_init_irq(void)
-+{
-+ at91rm9200_init_interrupts(NULL);
-+}
-+
-+static struct at91_eth_data __initdata vlink_eth_data = {
-+ .phy_irq_pin = AT91_PIN_PC4,
-+ .is_rmii = 1,
-+};
-+
-+static struct at91_usbh_data __initdata vlink_usbh_data = {
-+ .ports = 1,
-+};
-+
-+/*
-+static struct at91_udc_data __initdata vlink_udc_data = {
-+ .vbus_pin = AT91_PIN_PD4,
-+ .pullup_pin = AT91_PIN_PD5,
-+};
-+*/
-+
-+static struct at91_mmc_data __initdata vlink_mmc_data = {
-+// .det_pin = AT91_PIN_PB27,
-+ .slot_b = 0,
-+ .wire4 = 1,
-+// .wp_pin = AT91_PIN_PA17,
-+};
-+
-+static struct spi_board_info vlink_spi_devices[] = {
-+ { /* DataFlash chip */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 0,
-+ .max_speed_hz = 15 * 1000 * 1000,
-+ },
-+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-+ { /* DataFlash card */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 3,
-+ .max_speed_hz = 15 * 1000 * 1000,
-+ },
-+#endif
-+};
-+
-+/*static struct at91_gpio_led vlink_leds[] = {
-+ {
-+ .name = "led0",
-+ .gpio = AT91_PIN_PC14,
-+ .trigger = "heartbeat",
-+ },
-+ {
-+ .name = "led1",
-+ .gpio = AT91_PIN_PC15,
-+ .trigger = "timer",
-+ }
-+};
-+*/
-+
-+static void __init vlink_board_init(void)
-+{
-+ /* Serial */
-+ at91_add_device_serial();
-+ /* Ethernet */
-+ at91_add_device_eth(&vlink_eth_data);
-+ /* USB Host */
-+ at91_add_device_usbh(&vlink_usbh_data);
-+ /* USB Device */
-+// at91_add_device_udc(&vlink_udc_data);
-+// at91_set_multi_drive(vlink_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
-+ /* I2C */
-+// at91_add_device_i2c();
-+ /* SPI */
-+ at91_add_device_spi(vlink_spi_devices, ARRAY_SIZE(vlink_spi_devices));
-+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-+ /* DataFlash card */
-+// at91_set_gpio_output(AT91_PIN_PB22, 0);
-+#else
-+ /* MMC */
-+// at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
-+ at91_add_device_mmc(0, &vlink_mmc_data);
-+#endif
-+ /* LEDs */
-+// at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds));
-+
-+/* Other LED's */
-+ at91_set_gpio_output(AT91_PIN_PC7, 1); // LED FRONT AP1
-+ at91_set_gpio_output(AT91_PIN_PC8, 1); // LED FRONT BP1
-+ at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1
-+ at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1
-+ at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2
-+ at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2
-+
-+/* SIM Cards */
-+ at91_set_gpio_output(AT91_PIN_PB9, 1); // ENBSC3
-+ at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2
-+ at91_set_gpio_output(AT91_PIN_PB11, 1); // ENBSC1
-+
-+/* GSM Module Control */
-+ at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF
-+
-+/* Test jig presence detection */
-+ at91_set_gpio_input(AT91_PIN_PB8, 1); // JIGPRESENT
-+
-+/* Power indicator */
-+ at91_set_gpio_input(AT91_PIN_PB22, 1); // PWR_IND
-+
-+/* USB Device control */
-+ at91_set_gpio_input(AT91_PIN_PB27, 1); // UDB_CNX
-+ at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
-+ at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive
-+
-+}
-+
-+MACHINE_START(VLINK, "FDL VersaLink")
-+ /* Maintainer: Guthrie Consulting */
-+ .phys_io = AT91_BASE_SYS,
-+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+ .boot_params = AT91_SDRAM_BASE + 0x100,
-+ .timer = &at91rm9200_timer,
-+ .map_io = vlink_map_io,
-+ .init_irq = vlink_init_irq,
-+ .init_machine = vlink_board_init,
-+MACHINE_END
diff --git a/target/linux/at91/patches-2.6.25/002-led-driver.patch b/target/linux/at91/patches-2.6.25/002-led-driver.patch
deleted file mode 100644
index 595720d..0000000
--- a/target/linux/at91/patches-2.6.25/002-led-driver.patch
+++ /dev/null
@@ -1,167 +0,0 @@
---- a/arch/arm/mach-at91/at91rm9200_devices.c
-+++ b/arch/arm/mach-at91/at91rm9200_devices.c
-@@ -717,6 +717,26 @@ static void __init at91_add_device_watch
- static void __init at91_add_device_watchdog(void) {}
- #endif
-
-+/* --------------------------------------------------------------------
-+ * LEDs
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_LEDS)
-+u8 at91_leds_cpu;
-+u8 at91_leds_timer;
-+
-+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-+{
-+ /* Enable GPIO to access the LEDs */
-+ at91_set_gpio_output(cpu_led, 1);
-+ at91_set_gpio_output(timer_led, 1);
-+
-+ at91_leds_cpu = cpu_led;
-+ at91_leds_timer = timer_led;
-+}
-+#else
-+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-+#endif
-
- /* --------------------------------------------------------------------
- * SSC -- Synchronous Serial Controller
---- a/arch/arm/mach-at91/Makefile
-+++ b/arch/arm/mach-at91/Makefile
-@@ -60,7 +60,12 @@ obj-$(CONFIG_MACH_AT91CAP9ADK) += board-
- obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
-
- # Drivers
--obj-y += leds.o
-+ifeq ($(CONFIG_MACH_VLINK),y)
-+led-$(CONFIG_MACH_VLINK) += vlink_leds.o
-+else
-+led-y += leds.o
-+endif
-+obj-y += $(led-y)
- obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
-
- # Power Management
---- /dev/null
-+++ b/arch/arm/mach-at91/vlink_leds.c
-@@ -0,0 +1,105 @@
-+/*
-+ * LED driver for Atmel AT91-based boards.
-+ *
-+ * Copyright (C) SAN People (Pty) Ltd
-+ * Modified for FDL VersaLink Copyright (C) Guthrie Consulting
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+*/
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/leds.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+
-+static inline void at91_led_on(unsigned int led)
-+{
-+ at91_set_gpio_value(led, 0);
-+}
-+
-+static inline void at91_led_off(unsigned int led)
-+{
-+ at91_set_gpio_value(led, 1);
-+}
-+
-+static inline void at91_led_toggle(unsigned int led)
-+{
-+ unsigned long is_off = at91_get_gpio_value(led);
-+ if (is_off) {
-+ at91_led_on(led);
-+ at91_led_off(at91_leds_cpu);
-+ }
-+ else {
-+ at91_led_on(at91_leds_cpu);
-+ at91_led_off(led);
-+ }
-+}
-+
-+
-+/*
-+ * Handle LED events.
-+ */
-+
-+/*
-+ * VersaLink has a single bi-coloured LED which changes colour when the
-+ * polarity is reversed
-+ */
-+static void at91_leds_event(led_event_t evt)
-+{
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+
-+ switch(evt) {
-+ case led_start: /* System startup */
-+ at91_led_toggle(at91_leds_timer);
-+ break;
-+
-+ case led_stop: /* System stop / suspend */
-+ at91_led_toggle(at91_leds_timer);
-+ break;
-+
-+#ifdef CONFIG_LEDS_TIMER
-+ case led_timer: /* Every 50 timer ticks */
-+ at91_led_toggle(at91_leds_timer);
-+ break;
-+#endif
-+
-+#ifdef CONFIG_LEDS_CPU
-+ case led_idle_start: /* Entering idle state */
-+ at91_led_toggle(at91_leds_timer);
-+ break;
-+
-+ case led_idle_end: /* Exit idle state */
-+ at91_led_toggle(at91_leds_timer);
-+ break;
-+#endif
-+
-+ default:
-+ break;
-+ }
-+
-+ local_irq_restore(flags);
-+}
-+
-+
-+static int __init leds_init(void)
-+{
-+ if (!at91_leds_timer || !at91_leds_cpu)
-+ return -ENODEV;
-+
-+ leds_event = at91_leds_event;
-+
-+ leds_event(led_start);
-+ return 0;
-+}
-+
-+__initcall(leds_init);
---- a/include/asm-arm/arch-at91/board.h
-+++ b/include/asm-arm/arch-at91/board.h
-@@ -162,6 +162,11 @@ extern void __init at91_add_device_ac97(
- /* ISI */
- extern void __init at91_add_device_isi(void);
-
-+ /* LEDs */
-+extern u8 at91_leds_cpu;
-+extern u8 at91_leds_timer;
-+extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
-+
- /* Touchscreen Controller */
- extern void __init at91_add_device_tsadcc(void);
-
diff --git a/target/linux/at91/patches-2.6.25/003-gpio-driver.patch b/target/linux/at91/patches-2.6.25/003-gpio-driver.patch
deleted file mode 100644
index 3968c6b..0000000
--- a/target/linux/at91/patches-2.6.25/003-gpio-driver.patch
+++ /dev/null
@@ -1,546 +0,0 @@
---- a/arch/arm/mach-at91/board-vlink.c
-+++ b/arch/arm/mach-at91/board-vlink.c
-@@ -99,7 +99,7 @@ static struct at91_udc_data __initdata v
- */
-
- static struct at91_mmc_data __initdata vlink_mmc_data = {
--// .det_pin = AT91_PIN_PB27,
-+// .det_pin = AT91_PIN_PC10,
- .slot_b = 0,
- .wire4 = 1,
- // .wp_pin = AT91_PIN_PA17,
-@@ -136,6 +136,7 @@ static struct spi_board_info vlink_spi_d
-
- static void __init vlink_board_init(void)
- {
-+ int v100;
- /* Serial */
- at91_add_device_serial();
- /* Ethernet */
-@@ -157,36 +158,66 @@ static void __init vlink_board_init(void
- // at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
- at91_add_device_mmc(0, &vlink_mmc_data);
- #endif
-+
-+// Set VLink version PIN as an input with pull-up (V1.5 = GND)
-+ at91_set_gpio_input(AT91_PIN_PC2, 1);
-+ v100 = at91_get_gpio_value(AT91_PIN_PC2);
-+
- /* LEDs */
- // at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds));
-
- /* Other LED's */
-- at91_set_gpio_output(AT91_PIN_PC7, 1); // LED FRONT AP1
-- at91_set_gpio_output(AT91_PIN_PC8, 1); // LED FRONT BP1
-- at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1
-- at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1
-- at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2
-- at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2
-+ at91_set_gpio_output(AT91_PIN_PC7, 1); // LED FRONT AP1
-+ at91_set_gpio_output(AT91_PIN_PC8, 1); // LED FRONT BP1
-+ at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1
-+ at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1
-+ at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2
-+ at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2
-+
-+/* Test jig presence detection */
-+ at91_set_gpio_input(AT91_PIN_PB8, 1); // JIGPRESENT
-
- /* SIM Cards */
-- at91_set_gpio_output(AT91_PIN_PB9, 1); // ENBSC3
-- at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2
-- at91_set_gpio_output(AT91_PIN_PB11, 1); // ENBSC1
-+ if (at91_get_gpio_value(AT91_PIN_PB8)) {
-+ at91_set_gpio_output(AT91_PIN_PB11, 0);
-+ if (v100)
-+ at91_set_gpio_output(AT91_PIN_PB9, 1);
-+ else
-+ at91_set_gpio_output(AT91_PIN_PC13, 1);
-+ } else {
-+ at91_set_gpio_output(AT91_PIN_PB11, 1);
-+ if (v100)
-+ at91_set_gpio_output(AT91_PIN_PB9, 0);
-+ else
-+ at91_set_gpio_output(AT91_PIN_PC13, 0);
-+ }
-
--/* GSM Module Control */
-- at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF
-+ at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2
-
--/* Test jig presence detection */
-- at91_set_gpio_input(AT91_PIN_PB8, 1); // JIGPRESENT
-+/* GSM Module Control */
-+ at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF
-
- /* Power indicator */
-- at91_set_gpio_input(AT91_PIN_PB22, 1); // PWR_IND
-+ at91_set_gpio_input(AT91_PIN_PB22, 1); // PWR_IND
-
- /* USB Device control */
-- at91_set_gpio_input(AT91_PIN_PB27, 1); // UDB_CNX
-- at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
-- at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive
--
-+ at91_set_gpio_input(AT91_PIN_PB27, 1); // UDB_CNX
-+ at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
-+ at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive
-+
-+/* USB Power controls */
-+
-+ if (v100)
-+ { // V100
-+ at91_set_gpio_input (AT91_PIN_PC12, 1); // SD Card present
-+ }
-+ else
-+ { // DO special things for V1.5
-+ at91_set_gpio_output(AT91_PIN_PB9 , 0); // USB suspend
-+ at91_set_gpio_input (AT91_PIN_PC10, 1); // SD Card present
-+ at91_set_gpio_output(AT91_PIN_PC11, 0); // USB Vin CTRL for modules onboard
-+ at91_set_gpio_output(AT91_PIN_PC12, 0); // SIM control
-+ }
- }
-
- MACHINE_START(VLINK, "FDL VersaLink")
---- a/arch/arm/mach-at91/gpio.c
-+++ b/arch/arm/mach-at91/gpio.c
-@@ -29,6 +29,7 @@
-
- static struct at91_gpio_bank *gpio;
- static int gpio_banks;
-+static u32 pio_gpio_pin[4] = { 0, 0, 0, 0 };
-
-
- static inline void __iomem *pin_to_controller(unsigned pin)
-@@ -71,9 +72,13 @@ int __init_or_module at91_set_GPIO_perip
- {
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-+ int bank = (pin - PIN_BASE) / 32;
-
- if (!pio)
- return -EINVAL;
-+
-+ pio_gpio_pin[bank] |= mask;
-+
- __raw_writel(mask, pio + PIO_IDR);
- __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
- __raw_writel(mask, pio + PIO_PER);
-@@ -130,10 +135,13 @@ int __init_or_module at91_set_gpio_input
- {
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-+ int bank = (pin - PIN_BASE) / 32;
-
- if (!pio)
- return -EINVAL;
-
-+ pio_gpio_pin[bank] |= mask;
-+
- __raw_writel(mask, pio + PIO_IDR);
- __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
- __raw_writel(mask, pio + PIO_ODR);
-@@ -151,10 +159,13 @@ int __init_or_module at91_set_gpio_outpu
- {
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-+ int bank = (pin - PIN_BASE) / 32;
-
- if (!pio)
- return -EINVAL;
-
-+ pio_gpio_pin[bank] |= mask;
-+
- __raw_writel(mask, pio + PIO_IDR);
- __raw_writel(mask, pio + PIO_PUDR);
- __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
-@@ -262,6 +273,18 @@ int at91_get_gpio_value(unsigned pin)
- }
- EXPORT_SYMBOL(at91_get_gpio_value);
-
-+int at91_is_pin_gpio(unsigned pin)
-+{
-+ void __iomem *pio = pin_to_controller(pin);
-+ unsigned mask = pin_to_mask(pin);
-+ int bank = (pin - PIN_BASE) / 32;
-+
-+ if (!pio)
-+ return -EINVAL;
-+ return (pio_gpio_pin[bank] & mask) != 0;
-+}
-+EXPORT_SYMBOL(at91_is_pin_gpio);
-+
- /*--------------------------------------------------------------------------*/
-
- #ifdef CONFIG_PM
---- a/drivers/char/Kconfig
-+++ b/drivers/char/Kconfig
-@@ -1072,5 +1072,12 @@ config AT91_SPIDEV
- The SPI driver gives user mode access to this serial
- bus on the AT91RM9200 processor.
-
-+config AT91_VLIO
-+ tristate "Versalink LED and GPIO interface"
-+ depends on ARCH_AT91RM9200 && MACH_VLINK
-+ default n
-+ help
-+ Provides a handler GPIO's in userspace
-+
- endmenu
-
---- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -100,6 +100,7 @@ obj-$(CONFIG_GPIO_TB0219) += tb0219.o
- obj-$(CONFIG_TELCLOCK) += tlclk.o
- obj-$(CONFIG_AT91_SPI) += at91_spi.o
- obj-$(CONFIG_AT91_SPIDEV) += at91_spidev.o
-+obj-$(CONFIG_AT91_VLIO) += vlink_giu.o
-
- obj-$(CONFIG_MWAVE) += mwave/
- obj-$(CONFIG_AGP) += agp/
---- /dev/null
-+++ b/drivers/char/vlink_giu.c
-@@ -0,0 +1,333 @@
-+/*
-+ * Driver for FDL Versalink GPIO
-+ *
-+ * Copyright (C) 2005 Guthrie Consulting
-+ * Author: Hamish Guthrie <hamish@prodigi.ch>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/fs.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/types.h>
-+#include <linux/proc_fs.h>
-+#include <linux/fcntl.h>
-+#include <linux/seq_file.h>
-+#include <linux/cdev.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/uaccess.h>
-+
-+static int major; /* default is dynamic major device number */
-+module_param(major, int, 0);
-+MODULE_PARM_DESC(major, "Major device number");
-+
-+#define VIO_NR_DEVS 96
-+
-+struct vio_dev {
-+ struct cdev cdev;
-+};
-+
-+struct vio_dev *vio_devices;
-+static struct class *vio_class;
-+
-+#define MAX_VIO_NAMES 24
-+typedef struct
-+{
-+ char port;
-+ char pin;
-+ char name100[10];
-+ char name150[10];
-+} VIO_NAMES;
-+
-+VIO_NAMES VioName[MAX_VIO_NAMES] =
-+{ // Port, Pin, V100, V150
-+ {'A',19,"port1DTR" ,"port1DTR"},
-+ {'A',24,"port2DTR" ,"port2DTR"},
-+ {'B',8, "jigOn" ,"jigOn"} ,
-+ {'B',9, "enbSC3" ,"usbSUSPND"},
-+ {'B',10,"enbSC2" ,"enbSC2"},
-+ {'B',11,"enbSC1" ,"enbSC1"},
-+ {'B',12,"gsmONOFF" ,"gsmONOFF"},
-+ {'B',14,"ledBAP1" ,"ledBAP1"},
-+ {'B',15,"ledBBP1" ,"ledBBP1"},
-+ {'B',16,"ledBAP2" ,"ledBAP2"},
-+ {'B',17,"ledBBP2" ,"ledBBP2"},
-+ {'B',27,"udpCNX" ,"udpCNX"},
-+ {'B',28,"udpPUP" ,"udpPUP"},
-+ {'B',29,"port2DCD" ,"port2DCD"},
-+ {'C',2, "vlVer100" ,"vlVer150"},
-+ {'C',7, "ledFAP1" ,"ledFAP1"},
-+ {'C',8, "ledFBP1" ,"ledFBP1"},
-+ {'C',10,"vioC10" ,"sdCardON"},
-+ {'C',11,"vioC11" ,"vusbCTRL"},
-+ {'C',12,"sdCardON" ,"simCTRL"},
-+ {'C',13,"vioC13" ,"enbSC3"},
-+ {'C',14,"ledFBP2" ,"ledFBP2"},
-+ {'C',15,"ledFAP2" ,"ledFAP2"},
-+ {0,0,"",""}
-+};
-+
-+/*
-+{'B',18,"gsmRIO" ,"gsmRIO"},
-+{'B',20,"gsmTX" ,"gsmTX"},
-+{'B',21,"gsmRX" ,"gsmRX"},
-+{'B',22,"gsmPIND" ,"gsmPIND"},
-+{'B',23,"gsmDCD" ,"gsmDCD"},
-+{'B',24,"gsmCTS" ,"gsmCTS"},
-+{'B',25,"gsmDSR" ,"gsmDSR"},
-+{'B',26,"gsmRTS" ,"gsmRTS"},
-+*/
-+static void lookupPINName(char version100, char *devName, char port, char pin);
-+// EOF KWJ + AJE
-+
-+static ssize_t gpio_read(struct file *file, char __user *buf, size_t len,
-+ loff_t *ppos)
-+{
-+ unsigned int pin;
-+ int retval;
-+ char value = '0';
-+
-+ pin = iminor(file->f_dentry->d_inode);
-+
-+ retval = at91_get_gpio_value(PIN_BASE + pin);
-+ if (retval < 0)
-+ return -EFAULT;
-+
-+ value = retval + 0x30;
-+ if (put_user(value, buf))
-+ return -EFAULT;
-+
-+ return 1;
-+}
-+
-+static ssize_t gpio_write(struct file *file, const char __user *data,
-+ size_t len, loff_t *ppos)
-+{
-+ unsigned int pin;
-+ size_t i;
-+ char c;
-+ int retval = 0;
-+
-+ pin = iminor(file->f_dentry->d_inode);
-+
-+ for (i = 0; i < len; i++) {
-+ if (get_user(c, data + i))
-+ return -EFAULT;
-+
-+ switch (c) {
-+ case '0':
-+ case '1':
-+ retval = at91_set_gpio_value(PIN_BASE + pin, (int)c - 0x30);
-+ if (retval < 0)
-+ return -EFAULT;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ if (retval < 0)
-+ break;
-+ }
-+
-+ return i;
-+}
-+
-+static int gpio_open(struct inode *inode, struct file *file)
-+{
-+ return nonseekable_open(inode, file);
-+}
-+
-+static int gpio_release(struct inode *inode, struct file *file)
-+{
-+ return 0;
-+}
-+
-+static struct file_operations vio_fops = {
-+ .owner = THIS_MODULE,
-+ .read = gpio_read,
-+ .write = gpio_write,
-+ .open = gpio_open,
-+ .release = gpio_release,
-+};
-+
-+static void vio_setup_cdev(struct vio_dev *dev, int index)
-+{
-+ int err, devno = MKDEV(major, index);
-+
-+ cdev_init(&dev->cdev, &vio_fops);
-+ dev->cdev.owner = THIS_MODULE;
-+ dev->cdev.ops = &vio_fops;
-+ err = cdev_add (&dev->cdev, devno, 1);
-+ if (err)
-+ printk(KERN_NOTICE "vio: Error %d adding vio%d", err, index);
-+}
-+
-+static int vio_remove(struct platform_device *dev)
-+{
-+ int i;
-+ dev_t devno = MKDEV(major, 0);
-+
-+ if (vio_devices) {
-+ for(i=0; i<VIO_NR_DEVS; i++) {
-+ int iodev = at91_is_pin_gpio(PIN_BASE + i);
-+ if (iodev) {
-+ cdev_del(&vio_devices[i].cdev);
-+ class_device_destroy(vio_class, MKDEV(major, i));
-+ }
-+ }
-+ kfree(vio_devices);
-+ }
-+
-+ class_destroy(vio_class);
-+ unregister_chrdev_region(devno, VIO_NR_DEVS);
-+
-+ platform_set_drvdata(dev, NULL);
-+
-+ return 0;
-+}
-+
-+static int vio_probe(struct platform_device *dev)
-+{
-+ int retval, i, j;
-+ dev_t vdev = 0;
-+ char devName[30];
-+ int vlinkV100;
-+
-+ if (major) {
-+ vdev = MKDEV(major, 0);
-+ retval = register_chrdev_region(vdev, VIO_NR_DEVS, "vio");
-+ } else {
-+ retval = alloc_chrdev_region(&vdev, 0, VIO_NR_DEVS, "vio");
-+ major = MAJOR(vdev);
-+ }
-+ if (retval < 0) {
-+ printk(KERN_WARNING "vio: can't get major %d\n", major);
-+ return retval;
-+ }
-+
-+ if (major == 0) {
-+ major = retval;
-+ printk(KERN_INFO "vio: major number %d\n", major);
-+ }
-+
-+ vio_class = class_create(THIS_MODULE, "vio");
-+
-+ if (IS_ERR(vio_class)) {
-+ printk(KERN_ERR "vio: Error creating vio class\n");
-+ vio_remove(dev);
-+ return PTR_ERR(vio_class);
-+ }
-+
-+ vlinkV100 = at91_get_gpio_value(AT91_PIN_PC2); // Denotes V1.5 if GND
-+
-+ vio_devices = kmalloc(VIO_NR_DEVS * sizeof(struct vio_dev), GFP_KERNEL);
-+ if (!vio_devices) {
-+ retval = -ENOMEM;
-+ goto fail;
-+ }
-+ memset(vio_devices, 0, VIO_NR_DEVS * sizeof(struct vio_dev));
-+
-+ for (i=0; i<VIO_NR_DEVS/32; i++)
-+ for(j=0; j<32; j++) {
-+ int iodev = at91_is_pin_gpio(PIN_BASE + i*32 + j);
-+ if (iodev) {
-+ vio_setup_cdev(&vio_devices[i*32 + j], i*32 + j);
-+ // Lookup name of vio to create
-+ lookupPINName(vlinkV100, devName, i, j);
-+ class_device_create(vio_class, NULL, MKDEV(major, i*32 + j), NULL, devName);
-+ }
-+ }
-+
-+ platform_set_drvdata(dev, vio_devices);
-+
-+ return 0;
-+
-+fail:
-+ vio_remove(dev);
-+ return retval;
-+}
-+
-+static void lookupPINName(char version100, char *devName, char port, char pin)
-+{
-+ int i = -1;
-+ char found = 0;
-+ while (!found)
-+ {
-+ i++;
-+ if (i >= MAX_VIO_NAMES)
-+ break;
-+ if (VioName[i].port == port+'A' && VioName[i].pin == pin)
-+ {
-+ printk(KERN_ERR "vio++: %c%d=%s\n",VioName[i].port,VioName[i].pin,VioName[i].name150);
-+ if (version100)
-+ strcpy(devName, VioName[i].name100);
-+ else
-+ strcpy(devName, VioName[i].name150);
-+ found = 1;
-+ }
-+ }
-+ if (!found)
-+ sprintf(devName, "vio%c%d", port + 'A', pin);
-+}
-+
-+static struct platform_device *vio_platform_device;
-+
-+static struct platform_driver vio_driver = {
-+ .probe = vio_probe,
-+ .remove = vio_remove,
-+ .driver = {
-+ .name = "vio",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init vio_init(void)
-+{
-+ int retval;
-+
-+ vio_platform_device = platform_device_register_simple("vio", -1, NULL, 0);
-+ if (IS_ERR(vio_platform_device)) {
-+ printk(KERN_WARNING "vio: device registration failed\n");
-+ return PTR_ERR(vio_platform_device);
-+ }
-+
-+ retval = platform_driver_register(&vio_driver);
-+ if (retval < 0) {
-+ printk(KERN_WARNING "vio: driver registration failed\n");
-+ platform_device_unregister(vio_platform_device);
-+ }
-+
-+ return retval;
-+}
-+
-+static void __exit vio_exit(void)
-+{
-+ platform_driver_unregister(&vio_driver);
-+ platform_device_unregister(vio_platform_device);
-+}
-+
-+module_init(vio_init);
-+module_exit(vio_exit);
-+
-+MODULE_AUTHOR("Hamish Guthrie <hamish@prodigi.ch>");
-+MODULE_DESCRIPTION("FDL Versalink GPIO Driver");
---- a/include/asm-arm/arch-at91/gpio.h
-+++ b/include/asm-arm/arch-at91/gpio.h
-@@ -199,6 +199,7 @@ extern int __init_or_module at91_set_mul
- /* callable at any time */
- extern int at91_set_gpio_value(unsigned pin, int value);
- extern int at91_get_gpio_value(unsigned pin);
-+extern int at91_is_pin_gpio(unsigned pin);
-
- /* callable only from core power-management code */
- extern void at91_gpio_suspend(void);
diff --git a/target/linux/at91/patches-2.6.25/007-mtd-partition.patch b/target/linux/at91/patches-2.6.25/007-mtd-partition.patch
deleted file mode 100644
index 503c892..0000000
--- a/target/linux/at91/patches-2.6.25/007-mtd-partition.patch
+++ /dev/null
@@ -1,36 +0,0 @@
---- a/drivers/mtd/devices/at91_dataflash.c
-+++ b/drivers/mtd/devices/at91_dataflash.c
-@@ -175,7 +175,7 @@ static struct mtd_partition static_parti
- };
- #endif
-
--static const char *part_probes[] = { "cmdlinepart", NULL, };
-+static const char *part_probes[] = { "cmdlinepart", "at91part", NULL, };
-
- #endif
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -168,6 +168,12 @@ config MTD_OF_PARTS
- the partition map from the children of the flash node,
- as described in Documentation/powerpc/booting-without-of.txt.
-
-+config MTD_AT91_PARTS
-+ tristate "Atmel AT91 partitioning support"
-+ depends on MTD_PARTITIONS && ARCH_AT91RM9200 && AT91_SPI
-+ ---help---
-+ Atmel AT91 partitioning support
-+
- comment "User Modules And Translation Layers"
-
- config MTD_CHAR
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
- obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
-+obj-$(CONFIG_MTD_AT91_PARTS) += at91part.o
-
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_CHAR) += mtdchar.o
diff --git a/target/linux/at91/patches-2.6.25/008-fdl-serial.patch b/target/linux/at91/patches-2.6.25/008-fdl-serial.patch
deleted file mode 100644
index cf11ac0..0000000
--- a/target/linux/at91/patches-2.6.25/008-fdl-serial.patch
+++ /dev/null
@@ -1,161 +0,0 @@
---- a/drivers/serial/atmel_serial.c
-+++ b/drivers/serial/atmel_serial.c
-@@ -214,6 +214,34 @@ static void atmel_set_mctrl(struct uart_
- at91_set_gpio_value(AT91_PIN_PA21, 0);
- else
- at91_set_gpio_value(AT91_PIN_PA21, 1);
-+
-+ /*
-+ * FDL VersaLink adds GPIOS to provide full modem
-+ * control on USART 0 - Drive DTR and RI pins manually
-+ */
-+ if (mctrl & TIOCM_DTR)
-+ at91_set_gpio_value(AT91_PIN_PB6, 0);
-+ else
-+ at91_set_gpio_value(AT91_PIN_PB6, 1);
-+ if (mctrl & TIOCM_RI)
-+ at91_set_gpio_value(AT91_PIN_PB7, 0);
-+ else
-+ at91_set_gpio_value(AT91_PIN_PB7, 1);
-+ }
-+
-+ /*
-+ * FDL VersaLink adds GPIOS to provide full modem control on
-+ * USART 3 - Drive DTR and RI pins manually
-+ */
-+ if (port->mapbase == AT91RM9200_BASE_US3) {
-+ if (mctrl & TIOCM_DTR)
-+ at91_set_gpio_value(AT91_PIN_PB29, 0);
-+ else
-+ at91_set_gpio_value(AT91_PIN_PB29, 1);
-+ if (mctrl & TIOCM_RI)
-+ at91_set_gpio_value(AT91_PIN_PB2, 0);
-+ else
-+ at91_set_gpio_value(AT91_PIN_PB2, 1);
- }
- }
- #endif
-@@ -251,8 +279,10 @@ static u_int atmel_get_mctrl(struct uart
- /*
- * The control signals are active low.
- */
-- if (!(status & ATMEL_US_DCD))
-- ret |= TIOCM_CD;
-+
-+ if (!(port->mapbase == AT91RM9200_BASE_US0 || port->mapbase == AT91RM9200_BASE_US3))
-+ if (!(status & ATMEL_US_DCD))
-+ ret |= TIOCM_CD;
- if (!(status & ATMEL_US_CTS))
- ret |= TIOCM_CTS;
- if (!(status & ATMEL_US_DSR))
-@@ -260,6 +290,16 @@ static u_int atmel_get_mctrl(struct uart
- if (!(status & ATMEL_US_RI))
- ret |= TIOCM_RI;
-
-+ /*
-+ * Read the GPIO's for the FDL VersaLink special case
-+ */
-+ if (port->mapbase == AT91RM9200_BASE_US0)
-+ if (!(at91_get_gpio_value(AT91_PIN_PA19)))
-+ ret |= TIOCM_CD;
-+ if (port->mapbase == AT91RM9200_BASE_US3)
-+ if (!(at91_get_gpio_value(AT91_PIN_PA24)))
-+ ret |= TIOCM_CD;
-+
- return ret;
- }
-
-@@ -453,6 +493,34 @@ static void atmel_tx_chars(struct uart_p
- }
-
- /*
-+ * USART0 DCD Interrupt handler
-+ */
-+
-+static irqreturn_t atmel_u0_DCD_interrupt(int irq, void *dev_id)
-+{
-+ struct uart_port *port = dev_id;
-+ int status = at91_get_gpio_value(irq);
-+
-+ uart_handle_dcd_change(port, !(status));
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/*
-+ * USART3 DCD Interrupt handler
-+ */
-+
-+static irqreturn_t atmel_u3_DCD_interrupt(int irq, void *dev_id)
-+{
-+ struct uart_port *port = dev_id;
-+ int status = at91_get_gpio_value(irq);
-+
-+ uart_handle_dcd_change(port, !(status));
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/*
- * receive interrupt handler.
- */
- static void
-@@ -815,6 +883,23 @@ static int atmel_startup(struct uart_por
- return retval;
- }
-
-+ if (port->mapbase == AT91RM9200_BASE_US0) {
-+ retval = request_irq(AT91_PIN_PA19, atmel_u0_DCD_interrupt, 0, "atmel_serial", port);
-+ if (retval) {
-+ printk("atmel_serial: atmel_startup - Can't get u0DCD irq\n");
-+ free_irq(port->irq, port);
-+ return retval;
-+ }
-+ }
-+ if (port->mapbase == AT91RM9200_BASE_US3) {
-+ retval = request_irq(AT91_PIN_PA24, atmel_u3_DCD_interrupt, 0, "atmel_serial", port);
-+ if (retval) {
-+ printk("atmel_serial: atmel_startup - Can't get u3DCD irq\n");
-+ free_irq(port->irq, port);
-+ return retval;
-+ }
-+ }
-+
- /*
- * Initialize DMA (if necessary)
- */
-@@ -834,6 +919,10 @@ static int atmel_startup(struct uart_por
- kfree(atmel_port->pdc_rx[0].buf);
- }
- free_irq(port->irq, port);
-+ if (port->mapbase == AT91RM9200_BASE_US0)
-+ free_irq(AT91_PIN_PA19, port);
-+ if (port->mapbase == AT91RM9200_BASE_US3)
-+ free_irq(AT91_PIN_PA24, port);
- return -ENOMEM;
- }
- pdc->dma_addr = dma_map_single(port->dev,
-@@ -873,7 +962,11 @@ static int atmel_startup(struct uart_por
- retval = atmel_open_hook(port);
- if (retval) {
- free_irq(port->irq, port);
-- return retval;
-+ if (port->mapbase == AT91RM9200_BASE_US0)
-+ free_irq(AT91_PIN_PA19, port);
-+ if (port->mapbase == AT91RM9200_BASE_US3)
-+ free_irq(AT91_PIN_PA24, port);
-+ return retval;
- }
- }
-
-@@ -947,6 +1040,10 @@ static void atmel_shutdown(struct uart_p
- * Free the interrupt
- */
- free_irq(port->irq, port);
-+ if (port->mapbase == AT91RM9200_BASE_US0)
-+ free_irq(AT91_PIN_PA19, port);
-+ if (port->mapbase == AT91RM9200_BASE_US3)
-+ free_irq(AT91_PIN_PA24, port);
-
- /*
- * If there is a specific "close" function (to unregister
diff --git a/target/linux/at91/patches-2.6.25/009-fdl-uartinit.patch b/target/linux/at91/patches-2.6.25/009-fdl-uartinit.patch
deleted file mode 100644
index d300231..0000000
--- a/target/linux/at91/patches-2.6.25/009-fdl-uartinit.patch
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/arch/arm/mach-at91/at91rm9200_devices.c
-+++ b/arch/arm/mach-at91/at91rm9200_devices.c
-@@ -1001,7 +1001,15 @@ static inline void configure_usart0_pins
- * We need to drive the pin manually. Default is off (RTS is active low).
- */
- at91_set_gpio_output(AT91_PIN_PA21, 1);
-- }
-+ }
-+ if (pins & ATMEL_UART_DTR)
-+ at91_set_gpio_output(AT91_PIN_PB6, 1); /* DTR0 */
-+ if (pins & ATMEL_UART_RI)
-+ at91_set_gpio_output(AT91_PIN_PB7, 1); /* RI0 */
-+ if (pins & ATMEL_UART_DCD) {
-+ at91_set_gpio_input(AT91_PIN_PA19, 1); /* DCD0 */
-+ at91_set_deglitch(AT91_PIN_PA19, 1);
-+ }
- }
-
- static struct resource uart1_resources[] = {
-@@ -1139,6 +1147,14 @@ static inline void configure_usart3_pins
- at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */
-+ if (pins & ATMEL_UART_DTR)
-+ at91_set_gpio_output(AT91_PIN_PB29, 1); /* DTR0 */
-+ if (pins & ATMEL_UART_RI)
-+ at91_set_gpio_output(AT91_PIN_PB2, 1); /* RI0 */
-+ if (pins & ATMEL_UART_DCD) {
-+ at91_set_gpio_input(AT91_PIN_PA24, 1); /* DCD0 */
-+ at91_set_deglitch(AT91_PIN_PA24, 1);
-+ }
- }
-
- static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
diff --git a/target/linux/at91/patches-2.6.25/010-dm9161a-phyfix.patch b/target/linux/at91/patches-2.6.25/010-dm9161a-phyfix.patch
deleted file mode 100644
index 756e014..0000000
--- a/target/linux/at91/patches-2.6.25/010-dm9161a-phyfix.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/drivers/net/arm/at91_ether.c
-+++ b/drivers/net/arm/at91_ether.c
-@@ -146,6 +146,7 @@ static void update_linkspeed(struct net_
- struct at91_private *lp = netdev_priv(dev);
- unsigned int bmsr, bmcr, lpa, mac_cfg;
- unsigned int speed, duplex;
-+ unsigned long timeout = jiffies + HZ;
-
- if (!mii_link_ok(&lp->mii)) { /* no link */
- netif_carrier_off(dev);
-@@ -158,8 +159,15 @@ static void update_linkspeed(struct net_
- read_phy(lp->phy_address, MII_BMSR, &bmsr);
- read_phy(lp->phy_address, MII_BMCR, &bmcr);
- if (bmcr & BMCR_ANENABLE) { /* AutoNegotiation is enabled */
-- if (!(bmsr & BMSR_ANEGCOMPLETE))
-- return; /* Do nothing - another interrupt generated when negotiation complete */
-+ while (!(bmsr & BMSR_ANEGCOMPLETE)) {
-+ if (time_after(jiffies, timeout)) {
-+ printk("at91_ether: Auto-negotiate timeout\n");
-+ return;
-+ }
-+ read_phy(lp->phy_address, MII_BMSR, &bmsr);
-+ read_phy(lp->phy_address, MII_BMCR, &bmcr);
-+ cpu_relax();
-+ }
-
- read_phy(lp->phy_address, MII_LPA, &lpa);
- if ((lpa & LPA_100FULL) || (lpa & LPA_100HALF)) speed = SPEED_100;
diff --git a/target/linux/at91/patches-2.6.25/014-initpartition.patch b/target/linux/at91/patches-2.6.25/014-initpartition.patch
deleted file mode 100644
index 554c149..0000000
--- a/target/linux/at91/patches-2.6.25/014-initpartition.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- a/drivers/mtd/devices/at91_dataflash.c
-+++ b/drivers/mtd/devices/at91_dataflash.c
-@@ -163,12 +163,12 @@ static struct mtd_partition static_parti
- .mask_flags = MTD_WRITEABLE, /* read-only */
- },
- {
-- .name = "kernel",
-+ .name = "knlroot",
- .offset = MTDPART_OFS_NXTBLK,
-- .size = 5 * 32 * 8 * 1056, /* 5 sectors */
-+ .size = 0x320400,
- },
- {
-- .name = "filesystem",
-+ .name = "jffs2",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL, /* rest = 26 sectors */
- }
diff --git a/target/linux/at91/patches-2.6.25/017-usb_serial_endpoint_size.patch b/target/linux/at91/patches-2.6.25/017-usb_serial_endpoint_size.patch
deleted file mode 100644
index 7bd38b4..0000000
--- a/target/linux/at91/patches-2.6.25/017-usb_serial_endpoint_size.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/usb/serial/usb-serial.c
-+++ b/drivers/usb/serial/usb-serial.c
-@@ -904,7 +904,7 @@ int usb_serial_probe(struct usb_interfac
- dev_err(&interface->dev, "No free urbs available\n");
- goto probe_error;
- }
-- buffer_size = (endpoint->wMaxPacketSize > maxSize) ? endpoint->wMaxPacketSize : maxSize;
-+ buffer_size = 2048;
- port->bulk_in_size = buffer_size;
- port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
- port->bulk_in_buffer = kmalloc (buffer_size, GFP_KERNEL);