ramips: rename Digineo AC1200 Pro to ZBT-WG3526 32MB

The Digineo AC1200 Pro is the 32MB flash variant of the ZBT-WG3526 with
unpopulated/exposed sdhci slot. Rename to board to the OEM/ODM name and
add the sdhci kernel module to use it for multiple clones.

Signed-off-by: Mathias Kresin <dev@kresin.me>

8 files changed, 23 insertions, 29 deletions

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 391a8b6..016d293 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -72,7 +72,6 @@ ramips_setup_interfaces()
 		ucidef_set_interface_lan "eth0.2"
 		;;
 	3g-6200n|\
-	ac1200pro|\
 	ai-br100|\
 	d240|\
 	db-wrt01|\
@@ -116,6 +115,7 @@ ramips_setup_interfaces()
 	zbt-we826|\
 	zbt-wg2626|\
 	zbt-wg3526-16M|\
+	zbt-wg3526-32M|\
 	zbt-wr8305rt)
 		ucidef_add_switch "switch0" \
 			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 999ad9f..8b5e260 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -58,7 +58,10 @@ get_status_led() {
 	wn3000rpv3)
 		status_led="$board:red:power"
 		;;
-	ac1200pro|\
+	ai-br100|\
+	ht-tm02)
+		status_led="$board:blue:wlan"
+		;;
 	all0239-3g|\
 	dcs-930|\
 	dir-300-b1|\
@@ -82,10 +85,6 @@ get_status_led() {
 	zbt-wg2626)
 		status_led="$board:green:status"
 		;;
-	ai-br100|\
-	ht-tm02)
-		status_led="$board:blue:wlan"
-		;;
 	asl26555-8M|\
 	asl26555-16M)
 		status_led="asl26555:green:power"
@@ -274,7 +273,8 @@ get_status_led() {
 	zbt-cpe102)
 		status_led="$board:green:4g-0"
 		;;
-	zbt-wg3526-16M)
+	zbt-wg3526-16M|\
+	zbt-wg3526-32M)
 		status_led="zbt-wg3526:green:status"
 		;;
 	esac
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index d0abd2d..3342a8f 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -130,9 +130,6 @@ ramips_board_detect() {
 	*"DCS-930L B1")
 		name="dcs-930l-b1"
 		;;
-	*"Digineo AC1200 Pro")
-		name="ac1200pro"
-		;;
 	*"DIR-300 B1")
 		name="dir-300-b1"
 		;;
@@ -664,6 +661,9 @@ ramips_board_detect() {
 	*"ZBT-WG3526 (16M)")
 		name="zbt-wg3526-16M"
 		;;
+	*"ZBT-WG3526 (32M)")
+		name="zbt-wg3526-32M"
+		;;
 	*"ZBT-WR8305RT")
 		name="zbt-wr8305rt"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index f329b43..8c7f959 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -17,7 +17,6 @@ platform_check_image() {
 	3g150b|\
 	3g300m|\
 	a5-v11|\
-	ac1200pro|\
 	ai-br100|\
 	air3gii|\
 	all0239-3g|\
@@ -197,6 +196,7 @@ platform_check_image() {
 	zbt-we826|\
 	zbt-wg2626|\
 	zbt-wg3526-16M|\
+	zbt-wg3526-32M|\
 	zbt-wr8305rt|\
 	zte-q7|\
 	youku-yk1)
diff --git a/target/linux/ramips/dts/ZBT-WG3526-16M.dts b/target/linux/ramips/dts/ZBT-WG3526-16M.dts
index fb64450..1e2f152 100644
--- a/target/linux/ramips/dts/ZBT-WG3526-16M.dts
+++ b/target/linux/ramips/dts/ZBT-WG3526-16M.dts
@@ -9,7 +9,3 @@
 &firmware {
 	reg = <0x50000 0xfb0000>;
 };
-
-&status_led {
-	label = "zbt-wg3526:green:status";
-};
diff --git a/target/linux/ramips/dts/AC1200pro.dts b/target/linux/ramips/dts/ZBT-WG3526-32M.dts
index fbec818..99a4b45 100644
--- a/target/linux/ramips/dts/AC1200pro.dts
+++ b/target/linux/ramips/dts/ZBT-WG3526-32M.dts
@@ -3,13 +3,9 @@
 #include "ZBT-WG3526.dtsi"
 
 / {
-	model = "Digineo AC1200 Pro";
+	model = "ZBT-WG3526 (32M)";
 };
 
 &firmware {
 	reg = <0x50000 0x1fb0000>;
 };
-
-&status_led {
-	label = "ac1200pro:green:status";
-};
diff --git a/target/linux/ramips/dts/ZBT-WG3526.dtsi b/target/linux/ramips/dts/ZBT-WG3526.dtsi
index 582e420..5e195fb 100644
--- a/target/linux/ramips/dts/ZBT-WG3526.dtsi
+++ b/target/linux/ramips/dts/ZBT-WG3526.dtsi
@@ -35,7 +35,8 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		status_led: status {
+		status {
+			label = "zbt-wg3526:green:status";
 			gpios = <&gpio0 24 1>;
 		};
 	};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index ae5bf5e..b57552a 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -34,14 +34,6 @@ define Device/11acnas
 endef
 TARGET_DEVICES += 11acnas
 
-define Device/ac1200pro
-  DTS := AC1200pro
-  IMAGE_SIZE := $(ralink_default_fw_size_32M)
-  DEVICE_TITLE := Digineo AC1200 Pro
-  DEVICE_PACKAGES := kmod-usb3 kmod-ata-core kmod-ata-ahci
-endef
-TARGET_DEVICES += ac1200pro
-
 define Device/dir-860l-b1
   DTS := DIR-860L-B1
   BLOCKSIZE := 64k
@@ -270,6 +262,15 @@ define Device/zbt-wg3526-16M
 endef
 TARGET_DEVICES += zbt-wg3526-16M
 
+define Device/zbt-wg3526-32M
+  DTS := ZBT-WG3526-32M
+  IMAGE_SIZE := $(ralink_default_fw_size_32M)
+  SUPPORTED_DEVICES += ac1200pro
+  DEVICE_TITLE := ZBT WG3526 (32MB flash)
+  DEVICE_PACKAGES := kmod-usb3 kmod-usb-ledtrig-usbport kmod-ata-core kmod-ata-ahci kmod-sdhci-mt7620
+endef
+TARGET_DEVICES += zbt-wg3526-32M
+
 # FIXME: is this still needed?
 define Image/Prepare
 #define Build/Compile