madwifi: add some beacon setup/update related fixes (based on Bruno Randolf's patchset)

SVN-Revision: 12049

5 files changed, 110 insertions, 3 deletions

diff --git a/package/madwifi/patches/374-nbtt_fix.patch b/package/madwifi/patches/374-nbtt_fix.patch
new file mode 100644
index 0000000..3b00f64
--- /dev/null
+++ b/package/madwifi/patches/374-nbtt_fix.patch
@@ -0,0 +1,22 @@
+--- a/ath/if_ath.c
++++ b/ath/if_ath.c
+@@ -5476,6 +5476,9 @@
+ 		ath_beacon_dturbo_config(vap, intval &
+ 				~(HAL_BEACON_RESET_TSF | HAL_BEACON_ENA));
+ #endif
++		if ((nexttbtt & HAL_BEACON_PERIOD) - (ath_hal_gettsf32(ah) >> 10)
++				<= ath_hal_sw_beacon_response_time)
++			nexttbtt += intval;
+ 		sc->sc_nexttbtt = nexttbtt;
+ 		ath_hal_beaconinit(ah, nexttbtt, intval);
+ 		if (intval & HAL_BEACON_RESET_TSF) {
+--- a/ath_hal/ah_os.c
++++ b/ath_hal/ah_os.c
+@@ -71,6 +71,7 @@
+ int	ath_hal_dma_beacon_response_time = 2;	/* in TUs */
+ int	ath_hal_sw_beacon_response_time = 10;	/* in TUs */
+ int	ath_hal_additional_swba_backoff = 0;	/* in TUs */
++EXPORT_SYMBOL(ath_hal_sw_beacon_response_time);
+ 
+ struct ath_hal *
+ _ath_hal_attach(u_int16_t devid, HAL_SOFTC sc,
diff --git a/package/madwifi/patches/375-atim_tsf_update.patch b/package/madwifi/patches/375-atim_tsf_update.patch
new file mode 100644
index 0000000..bbe380e
--- /dev/null
+++ b/package/madwifi/patches/375-atim_tsf_update.patch
@@ -0,0 +1,59 @@
+--- a/ath/if_ath.c
++++ b/ath/if_ath.c
+@@ -2785,6 +2785,44 @@
+ 	return 1;
+ }
+ 
++/* Fix up the ATIM window after TSF resync */
++static int
++ath_hw_check_atim(struct ath_softc *sc, int window)
++{
++#define AR5K_TIMER0_5210       0x802c  /* Next beacon time register */
++#define AR5K_TIMER0_5211       0x8028
++#define AR5K_TIMER3_5210       0x8038  /* End of ATIM window time register */
++#define AR5K_TIMER3_5211       0x8034
++	struct ath_hal *ah = sc->sc_ah;
++	unsigned int nbtt, atim;
++	int dev = ar_device(sc->devid);
++
++	switch(dev) {
++	case 5210:
++		nbtt = OS_REG_READ(ah, AR5K_TIMER0_5210);
++		atim = OS_REG_READ(ah, AR5K_TIMER3_5210);
++		if (atim - nbtt != window) {
++			OS_REG_WRITE(ah, AR5K_TIMER3_5210, nbtt + window );
++			return atim - nbtt;
++		}
++		break;
++	case 5211:
++	case 5212:
++		nbtt = OS_REG_READ(ah, AR5K_TIMER0_5211);
++		atim = OS_REG_READ(ah, AR5K_TIMER3_5211);
++		if (atim - nbtt != window) {
++			OS_REG_WRITE(ah, AR5K_TIMER3_5211, nbtt + window );
++			return atim - nbtt;
++		}
++		break;
++	/* NB: 5416+ doesn't do ATIM in hw */
++	default:
++		break;
++	}
++	return 0;
++}
++
++
+ /*
+  * Reset the hardware w/o losing operational state.  This is
+  * basically a more efficient way of doing ath_stop, ath_init,
+@@ -6391,6 +6429,11 @@
+ 			DPRINTF(sc, ATH_DEBUG_BEACON, 
+ 				"Updated beacon timers\n");
+ 		}
++		if ((sc->sc_opmode == IEEE80211_M_IBSS) &&
++				IEEE80211_ADDR_EQ(ni->ni_bssid, vap->iv_bss->ni_bssid) &&
++				ath_hw_check_atim(sc, 1)) {
++			DPRINTF(sc, ATH_DEBUG_ANY, "Fixed ATIM window after beacon recv\n");
++		}
+ 		/* NB: Fall Through */
+ 	case IEEE80211_FC0_SUBTYPE_PROBE_RESP:
+ 		if (vap->iv_opmode == IEEE80211_M_IBSS &&
diff --git a/package/madwifi/patches/376-beacon_update.patch b/package/madwifi/patches/376-beacon_update.patch
new file mode 100644
index 0000000..2b4f34b
--- /dev/null
+++ b/package/madwifi/patches/376-beacon_update.patch
@@ -0,0 +1,26 @@
+--- a/ath/if_ath.c
++++ b/ath/if_ath.c
+@@ -5495,6 +5495,8 @@
+ 		ath_hal_intrset(ah, sc->sc_imask);
+ 		ath_set_beacon_cal(sc, 0);
+ 	} else {
++		unsigned long flags;
++
+ 		ath_hal_intrset(ah, 0);
+ 		if (reset_tsf)
+ 			intval |= HAL_BEACON_RESET_TSF;
+@@ -5514,11 +5516,14 @@
+ 		ath_beacon_dturbo_config(vap, intval &
+ 				~(HAL_BEACON_RESET_TSF | HAL_BEACON_ENA));
+ #endif
++		local_irq_save(flags);
+ 		if ((nexttbtt & HAL_BEACON_PERIOD) - (ath_hal_gettsf32(ah) >> 10)
+ 				<= ath_hal_sw_beacon_response_time)
+ 			nexttbtt += intval;
+ 		sc->sc_nexttbtt = nexttbtt;
+ 		ath_hal_beaconinit(ah, nexttbtt, intval);
++		local_irq_restore(flags);
++
+ 		if (intval & HAL_BEACON_RESET_TSF) {
+ 			sc->sc_last_tsf = 0;
+ 		}
diff --git a/package/madwifi/patches/406-monitor_r3711.patch b/package/madwifi/patches/406-monitor_r3711.patch
index d44a556..9f6ef59 100644
--- a/package/madwifi/patches/406-monitor_r3711.patch
+++ b/package/madwifi/patches/406-monitor_r3711.patch
@@ -1,6 +1,6 @@
 --- a/ath/if_ath.c
 +++ b/ath/if_ath.c
-@@ -6325,7 +6325,7 @@
+@@ -6371,7 +6371,7 @@
  
  	/* Never copy the SKB, as it is ours on the RX side, and this is the 
  	 * last process on the TX side and we only modify our own headers. */
@@ -9,7 +9,7 @@
  	if (tskb == NULL) {
  		DPRINTF(sc, ATH_DEBUG_ANY,
  			"Dropping; ath_skb_removepad failed!\n");
-@@ -6333,6 +6333,8 @@
+@@ -6379,6 +6379,8 @@
  	}
  	
  	ieee80211_input_monitor(ic, tskb, bf, tx, tsf, sc);
diff --git a/package/madwifi/patches/408-changeset_r3337.patch b/package/madwifi/patches/408-changeset_r3337.patch
index de2eda2..13200ab 100644
--- a/package/madwifi/patches/408-changeset_r3337.patch
+++ b/package/madwifi/patches/408-changeset_r3337.patch
@@ -10,7 +10,7 @@
  Please let us know if you think your name should be mentioned here!
 --- a/ath/if_ath.c
 +++ b/ath/if_ath.c
-@@ -2964,7 +2964,7 @@
+@@ -3002,7 +3002,7 @@
  	struct ath_softc *sc = dev->priv;
  	struct ath_hal *ah = sc->sc_ah;
  	struct ieee80211_phy_params *ph = (struct ieee80211_phy_params *)