mac80211: ath10k fix vht160 firmware crash

When the 160mhz width is selected the ath10k firmware crash. This fix this problem.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
(cherry picked from commit 134e832814f1986c7ee06ac00806ebb6e762fd15)

2 files changed, 182 insertions, 0 deletions

diff --git a/package/kernel/mac80211/patches/972-ath10k_fix-crash-due-to-wrong-handling-of-peer_bw_rxnss_override-parameter.patch b/package/kernel/mac80211/patches/972-ath10k_fix-crash-due-to-wrong-handling-of-peer_bw_rxnss_override-parameter.patch
new file mode 100644
index 0000000..9dceea8
--- /dev/null
+++ b/package/kernel/mac80211/patches/972-ath10k_fix-crash-due-to-wrong-handling-of-peer_bw_rxnss_override-parameter.patch
@@ -0,0 +1,132 @@
+From: Sebastian Gottschall <s.gottsch...@dd-wrt.com>
+
+current handling of peer_bw_rxnss_override parameter is based on guessing the 
+VHT160/8080 capability by rx rate. this is wrong and may lead
+to a non initialized peer_bw_rxnss_override parameter which is required since 
+VHT160 operation mode only supports 2x2 chainmasks in addition the original code
+initialized the parameter with wrong masked values.
+This patch uses the peer phymode and peer nss information for correct 
+initialisation of the peer_bw_rxnss_override parameter.
+if this peer information is not available, we initialize the parameter by 
+minimum nss which is suggested by QCA as temporary workaround according
+to the QCA sourcecodes.
+
+Signed-off-by: Sebastian Gottschall <s.gottsch...@dd-wrt.com>
+
+v2: remove debug messages
+v3: apply some cosmetics, update documentation
+v4: fix compile warning and truncate nss to maximum of 2x2 since current 
+chipsets only support 2x2 at vht160
+v5: handle maximum nss for chipsets supportig vht160 with 1x1 only
+v7: use more simple code variant and take care about hw/sw chainmask 
+configuration
+---
+ drivers/net/wireless/ath/ath10k/mac.c | 40 +++++++++++++++------------
+ drivers/net/wireless/ath/ath10k/wmi.c |  7 +----
+ drivers/net/wireless/ath/ath10k/wmi.h | 14 +++++++++-
+ 3 files changed, 36 insertions(+), 25 deletions(-)
+
+--- a/drivers/net/wireless/ath/ath10k/mac.c
++++ b/drivers/net/wireless/ath/ath10k/mac.c
+@@ -2466,7 +2466,7 @@ static void ath10k_peer_assoc_h_vht(stru
+ 	const u16 *vht_mcs_mask;
+ 	u8 ampdu_factor;
+ 	u8 max_nss, vht_mcs;
+-	int i;
++	int i, nss160;
+ 
+ 	if (WARN_ON(ath10k_mac_vif_chan(vif, &def)))
+ 		return;
+@@ -2526,23 +2526,27 @@ static void ath10k_peer_assoc_h_vht(stru
+ 		__le16_to_cpu(vht_cap->vht_mcs.tx_highest);
+ 	arg->peer_vht_rates.tx_mcs_set = ath10k_peer_assoc_h_vht_limit(
+ 		__le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map), vht_mcs_mask);
++	arg->peer_bw_rxnss_override = 0;
++	nss160 = 1; /* 1x1 default config for VHT160 */
+ 
+-	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vht peer %pM max_mpdu %d flags 0x%x\n",
+-		   sta->addr, arg->peer_max_mpdu, arg->peer_flags);
+-
+-	if (arg->peer_vht_rates.rx_max_rate &&
+-	    (sta->vht_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK)) {
+-		switch (arg->peer_vht_rates.rx_max_rate) {
+-		case 1560:
+-			/* Must be 2x2 at 160Mhz is all it can do. */
+-			arg->peer_bw_rxnss_override = 2;
+-			break;
+-		case 780:
+-			/* Can only do 1x1 at 160Mhz (Long Guard Interval) */
+-			arg->peer_bw_rxnss_override = 1;
+-			break;
+-		}
++	/* only 4x4 configuration do support 2x2 for VHT160, everything else must use 1x1 */
++	if (ar->cfg_rx_chainmask == 15)
++		nss160 = arg->peer_num_spatial_streams <= 2 ? arg->peer_num_spatial_streams : 2;
++
++	/* in case if peer is connected with vht160 or vht80+80, we need to properly adjust rxnss parameters otherwise firmware will raise a assert */
++	switch(arg->peer_phymode) {
++	case MODE_11AC_VHT80_80:
++		arg->peer_bw_rxnss_override = BW_NSS_FWCONF_80_80(nss160);
++	/* fall through */
++	case MODE_11AC_VHT160:
++		arg->peer_bw_rxnss_override |= BW_NSS_FWCONF_160(nss160);
++	break;
++	default:
++	break;
+ 	}
++
++	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vht peer %pM max_mpdu %d flags 0x%x peer_bw_rxnss_override 0x%x\n",
++		   sta->addr, arg->peer_max_mpdu, arg->peer_flags, arg->peer_bw_rxnss_override);
+ }
+ 
+ static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
+@@ -2694,9 +2698,9 @@ static int ath10k_peer_assoc_prepare(str
+ 	ath10k_peer_assoc_h_crypto(ar, vif, sta, arg);
+ 	ath10k_peer_assoc_h_rates(ar, vif, sta, arg);
+ 	ath10k_peer_assoc_h_ht(ar, vif, sta, arg);
++	ath10k_peer_assoc_h_phymode(ar, vif, sta, arg);
+ 	ath10k_peer_assoc_h_vht(ar, vif, sta, arg);
+ 	ath10k_peer_assoc_h_qos(ar, vif, sta, arg);
+-	ath10k_peer_assoc_h_phymode(ar, vif, sta, arg);
+ 
+ 	return 0;
+ }
+--- a/drivers/net/wireless/ath/ath10k/wmi.c
++++ b/drivers/net/wireless/ath/ath10k/wmi.c
+@@ -6760,12 +6760,7 @@ ath10k_wmi_peer_assoc_fill_10_4(struct a
+ 	struct wmi_10_4_peer_assoc_complete_cmd *cmd = buf;
+ 
+ 	ath10k_wmi_peer_assoc_fill_10_2(ar, buf, arg);
+-	if (arg->peer_bw_rxnss_override)
+-		cmd->peer_bw_rxnss_override =
+-			__cpu_to_le32((arg->peer_bw_rxnss_override - 1) |
+-				      BIT(PEER_BW_RXNSS_OVERRIDE_OFFSET));
+-	else
+-		cmd->peer_bw_rxnss_override = 0;
++	cmd->peer_bw_rxnss_override = __cpu_to_le32(arg->peer_bw_rxnss_override);
+ }
+ 
+ static int
+--- a/drivers/net/wireless/ath/ath10k/wmi.h
++++ b/drivers/net/wireless/ath/ath10k/wmi.h
+@@ -6209,7 +6209,19 @@ struct wmi_10_2_peer_assoc_complete_cmd
+ 	__le32 info0; /* WMI_PEER_ASSOC_INFO0_ */
+ } __packed;
+ 
+-#define PEER_BW_RXNSS_OVERRIDE_OFFSET  31
++#define BW_NSS_FWCONF_MAP_ENABLE             (1 << 31)
++#define BW_NSS_FWCONF_MAP_160MHZ_S           (0)
++#define BW_NSS_FWCONF_MAP_160MHZ_M           (0x00000007)
++#define BW_NSS_FWCONF_MAP_80_80MHZ_S         (3)
++#define BW_NSS_FWCONF_MAP_80_80MHZ_M         (0x00000038)
++#define BW_NSS_FWCONF_MAP_M                  (0x0000003F)
++
++#define GET_BW_NSS_FWCONF_160(x)             ((((x) & BW_NSS_FWCONF_MAP_160MHZ_M) >> BW_NSS_FWCONF_MAP_160MHZ_S) + 1)
++#define GET_BW_NSS_FWCONF_80_80(x)           ((((x) & BW_NSS_FWCONF_MAP_80_80MHZ_M) >> BW_NSS_FWCONF_MAP_80_80MHZ_S) + 1)
++
++/* Values defined to set 160 MHz Bandwidth NSS Mapping into FW*/
++#define BW_NSS_FWCONF_160(x)          (BW_NSS_FWCONF_MAP_ENABLE | (((x - 1) << BW_NSS_FWCONF_MAP_160MHZ_S) & BW_NSS_FWCONF_MAP_160MHZ_M))
++#define BW_NSS_FWCONF_80_80(x)        (BW_NSS_FWCONF_MAP_ENABLE | (((x - 1) << BW_NSS_FWCONF_MAP_80_80MHZ_S) & BW_NSS_FWCONF_MAP_80_80MHZ_M))
+ 
+ struct wmi_10_4_peer_assoc_complete_cmd {
+ 	struct wmi_10_2_peer_assoc_complete_cmd cmd;
diff --git a/package/kernel/mac80211/patches/973-ath10k_fix-band_center_freq-handling-for-VHT160-in-recent-firmwares.patch b/package/kernel/mac80211/patches/973-ath10k_fix-band_center_freq-handling-for-VHT160-in-recent-firmwares.patch
new file mode 100644
index 0000000..c8f79b8
--- /dev/null
+++ b/package/kernel/mac80211/patches/973-ath10k_fix-band_center_freq-handling-for-VHT160-in-recent-firmwares.patch
@@ -0,0 +1,50 @@
+From: Sebastian Gottschall <s.gottschall@dd-wrt.com>
+
+starting with firmware 10.4.3.4.x series QCA changed the handling of the channel property band_center_freq1 and band_center_freq2 in vht160 operation mode
+likelly for backward compatiblity with vht80 only capable clients.
+this patch adjusts the handling to get vht160 to work again with official qca firmwares newer than 3.3
+consider that this patch will not work with older firmwares anymore. to avoid undefined behaviour this we disable vht160 capability for outdated firmwares
+---
+ drivers/net/wireless/ath/ath10k/mac.c |  7 -------
+ drivers/net/wireless/ath/ath10k/wmi.c | 11 ++++++++---
+ 2 files changed, 8 insertions(+), 10 deletions(-)
+--- a/drivers/net/wireless/ath/ath10k/mac.c
++++ b/drivers/net/wireless/ath/ath10k/mac.c
+@@ -4416,13 +4416,6 @@ static struct ieee80211_sta_vht_cap ath1
+ 		vht_cap.cap |= val;
+ 	}
+ 
+-	/* Currently the firmware seems to be buggy, don't enable 80+80
+-	 * mode until that's resolved.
+-	 */
+-	if ((ar->vht_cap_info & IEEE80211_VHT_CAP_SHORT_GI_160) &&
+-	    (ar->vht_cap_info & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) == 0)
+-		vht_cap.cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
+-
+ 	mcs_map = 0;
+ 	for (i = 0; i < 8; i++) {
+ 		if ((i < ar->num_rf_chains) && (ar->cfg_tx_chainmask & BIT(i)))
+--- a/drivers/net/wireless/ath/ath10k/wmi.c
++++ b/drivers/net/wireless/ath/ath10k/wmi.c
+@@ -1660,13 +1660,18 @@ void ath10k_wmi_put_wmi_channel(struct w
+ 		flags |= WMI_CHAN_FLAG_HT40_PLUS;
+ 	if (arg->chan_radar)
+ 		flags |= WMI_CHAN_FLAG_DFS;
+-
++	ch->band_center_freq2 = 0;
+ 	ch->mhz = __cpu_to_le32(arg->freq);
+ 	ch->band_center_freq1 = __cpu_to_le32(arg->band_center_freq1);
+ 	if (arg->mode == MODE_11AC_VHT80_80)
+ 		ch->band_center_freq2 = __cpu_to_le32(arg->band_center_freq2);
+-	else
+-		ch->band_center_freq2 = 0;
++	if (arg->mode == MODE_11AC_VHT160)  {
++		if (arg->freq < arg->band_center_freq1)
++			ch->band_center_freq1 = __cpu_to_le32(arg->band_center_freq1 - 40);
++		else
++			ch->band_center_freq1 = __cpu_to_le32(arg->band_center_freq1 + 40);		
++		ch->band_center_freq2 = __cpu_to_le32(arg->band_center_freq1);
++	}
+ 	ch->min_power = arg->min_power;
+ 	ch->max_power = arg->max_power;
+ 	ch->reg_power = arg->max_reg_power;