summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2007-12-10 20:26:15 +0000
committerJohn Crispin <john@openwrt.org>2007-12-10 20:26:15 +0000
commit6e2b3bc158ea27c8e8dd2aa717df138cba8c274a (patch)
tree48d1f5851c3a528a3e4a06c64c75186bd051e446
parentf02869b17a56881d47f255546f3a1b992e7f0a8a (diff)
downloadmtk-20170518-6e2b3bc158ea27c8e8dd2aa717df138cba8c274a.zip
mtk-20170518-6e2b3bc158ea27c8e8dd2aa717df138cba8c274a.tar.gz
mtk-20170518-6e2b3bc158ea27c8e8dd2aa717df138cba8c274a.tar.bz2
added CONFIG_DANUBE_PCI_HW_SWAP
SVN-Revision: 9705
-rw-r--r--target/linux/danube/files/arch/mips/danube/pci.c19
1 files changed, 17 insertions, 2 deletions
diff --git a/target/linux/danube/files/arch/mips/danube/pci.c b/target/linux/danube/files/arch/mips/danube/pci.c
index 3f7b7f8..1896336 100644
--- a/target/linux/danube/files/arch/mips/danube/pci.c
+++ b/target/linux/danube/files/arch/mips/danube/pci.c
@@ -77,15 +77,25 @@ danube_pci_config_access(unsigned char access_type,
/* Perform access */
if (access_type == PCI_ACCESS_WRITE)
{
+#ifdef CONFIG_DANUBE_PCI_HW_SWAP
+ writel(swab32(*data), ((u32*)cfg_base));
+#else
writel(*data, ((u32*)cfg_base));
+#endif
} else {
*data = readl(((u32*)(cfg_base)));
+#ifdef CONFIG_DANUBE_PCI_HW_SWAP
+ *data = swab32(*data);
+#endif
}
wmb();
/* clean possible Master abort */
cfg_base = (danube_pci_mapped_cfg | (0x0 << DANUBE_PCI_CFG_FUNNUM_SHF)) + 4;
temp = readl(((u32*)(cfg_base)));
+#ifdef CONFIG_DANUBE_PCI_HW_SWAP
+ temp = swab32 (temp);
+#endif
cfg_base = (danube_pci_mapped_cfg | (0x68 << DANUBE_PCI_CFG_FUNNUM_SHF)) + 4;
writel(temp, ((u32*)cfg_base));
@@ -250,9 +260,14 @@ static void __init danube_pci_startup (void){
writel(0x0e000008, PCI_CR_BAR11MASK);
writel(0, PCI_CR_PCI_ADDR_MAP11);
writel(0, PCI_CS_BASE_ADDR1);
+#ifdef CONFIG_DANUBE_PCI_HW_SWAP
+ /* both TX and RX endian swap are enabled */
+ DANUBE_PCI_REG32 (PCI_CR_PCI_EOI_REG) |= 3;
+ wmb ();
+#endif
/*TODO: disable BAR2 & BAR3 - why was this in the origianl infineon code */
- // writel(readl(PCI_CR_BAR12MASK) | 0x80000000, PCI_CR_BAR12MASK);
- // writel(readl(PCI_CR_BAR13MASK) | 0x80000000, PCI_CR_BAR13MASK);
+ writel(readl(PCI_CR_BAR12MASK) | 0x80000000, PCI_CR_BAR12MASK);
+ writel(readl(PCI_CR_BAR13MASK) | 0x80000000, PCI_CR_BAR13MASK);
/*use 8 dw burse length */
writel(0x303, PCI_CR_FCI_BURST_LENGTH);