summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorHauke Mehrtens <hauke@hauke-m.de>2009-03-18 22:22:57 +0000
committerHauke Mehrtens <hauke@hauke-m.de>2009-03-18 22:22:57 +0000
commitc84390332f33f83d92dbcccf0a969cb2bf3a84e7 (patch)
tree44a59c0226c1e7fa82b89940f72fc0f59b9ee366
parent227399122b7cf9c95acd0d375c5aef6df2e73b57 (diff)
downloadmtk-20170518-c84390332f33f83d92dbcccf0a969cb2bf3a84e7.zip
mtk-20170518-c84390332f33f83d92dbcccf0a969cb2bf3a84e7.tar.gz
mtk-20170518-c84390332f33f83d92dbcccf0a969cb2bf3a84e7.tar.bz2
Update compat-wireless to 2009-03-18
Removing of include/net/ieee80211_radiotap.h is not needed, because it is only used by this compat-wireless. There are changes in that file and compat-wireless needs the newest version. Some more symbols are deactivated in the default config file, this will make building faster. The rt2800pci patches are up to date now. SVN-Revision: 14946
-rw-r--r--package/mac80211/Makefile5
-rw-r--r--package/mac80211/patches/007-remove_unused_stuff.patch174
-rw-r--r--package/mac80211/patches/201-ath5k_eeprom.patch494
-rw-r--r--package/mac80211/patches/202-ath5k_txpower_2413.patch672
-rw-r--r--package/mac80211/patches/300-rt2x00-Move-Move-pci_dev-specific-access-to-rt2x00p.patch150
-rw-r--r--package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch4
-rw-r--r--package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch321
-rw-r--r--package/mac80211/patches/303-rt2x00-Implement-support-for-rt2800usb.patch46
-rw-r--r--package/mac80211/patches/304-rt2x00-Detect-cypher-type-during-RX-rt2800pci.patch35
-rw-r--r--package/mac80211/patches/304-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch25
-rw-r--r--package/mac80211/patches/305-rt2x00-Detect-cypher-type-during-RX-rt2800usb.patch40
-rw-r--r--package/mac80211/patches/305-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch25
-rw-r--r--package/mac80211/patches/306-rt2x00-Fix-HW-crypto-offset-calculation-rt2800pci.patch36
-rw-r--r--package/mac80211/patches/306-rt2x00-Fix-module-loading-in-case-of-error-rt2800p.patch32
-rw-r--r--package/mac80211/patches/307-rt2x00-Add-PM-support-for-SoC-rt2800pci.patch80
-rw-r--r--package/mac80211/patches/307-rt2x00-Fix-HW-crypto-offset-calculation-rt2800usb.patch35
-rw-r--r--package/mac80211/patches/308-rt2x00-DMA-fixes-new-chipset-support-rt2800pci.patch535
-rw-r--r--package/mac80211/patches/308-rt2x00-Fix-fill_rxdone-rt2800pci.patch21
-rw-r--r--package/mac80211/patches/309-rt2x00-Fix-compile-errors-for-SoC.patch136
-rw-r--r--package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch4
-rw-r--r--package/mac80211/patches/402-ath9k-enable-debug.patch8
-rw-r--r--package/mac80211/patches/403-ath9k-fix-invalid-mac-address-handling.patch2
22 files changed, 1424 insertions, 1456 deletions
diff --git a/package/mac80211/Makefile b/package/mac80211/Makefile
index de3b4c5..b1e5a60 100644
--- a/package/mac80211/Makefile
+++ b/package/mac80211/Makefile
@@ -17,12 +17,12 @@ ifneq ($(CONFIG_LINUX_2_6_21)$(CONFIG_LINUX_2_6_23)$(CONFIG_LINUX_2_6_24)$(CONFI
PKG_MD5SUM:=9563ceeed86bca0859ad5f010623277c
PATCH_DIR:=./patches-old
else
- PKG_VERSION:=2009-03-13
+ PKG_VERSION:=2009-03-18
PKG_RELEASE:=1
PKG_SOURCE_URL:= \
http://www.orbit-lab.org/kernel/compat-wireless-2.6/2009/03 \
http://wireless.kernel.org/download/compat-wireless-2.6
- PKG_MD5SUM:=bc924e8914a78d5a40ce4c17e5d28447
+ PKG_MD5SUM:=d46d230f62aed9bdec7a1f168feb221b
endif
PKG_SOURCE:=compat-wireless-$(PKG_VERSION).tar.bz2
@@ -428,7 +428,6 @@ define Build/Prepare
$(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(ZD1211FW_NAME)-$(ZD1211FW_VERSION).tar.bz2
rm -rf $(PKG_BUILD_DIR)/include/linux/ssb
rm -f $(PKG_BUILD_DIR)/include/net/ieee80211.h
- rm $(PKG_BUILD_DIR)/include/net/ieee80211_radiotap.h
rm $(PKG_BUILD_DIR)/include/linux/eeprom_93cx6.h
endef
diff --git a/package/mac80211/patches/007-remove_unused_stuff.patch b/package/mac80211/patches/007-remove_unused_stuff.patch
index 965416d..66b5c47 100644
--- a/package/mac80211/patches/007-remove_unused_stuff.patch
+++ b/package/mac80211/patches/007-remove_unused_stuff.patch
@@ -1,10 +1,8 @@
-Index: compat-wireless-2009-03-13/config.mk
-===================================================================
---- compat-wireless-2009-03-13.orig/config.mk 2009-03-17 23:34:31.000000000 +0100
-+++ compat-wireless-2009-03-13/config.mk 2009-03-17 23:40:08.000000000 +0100
-@@ -91,10 +91,10 @@ CONFIG_MAC80211_MESH=y
+--- a/config.mk
++++ b/config.mk
+@@ -104,10 +104,10 @@ CONFIG_MAC80211_MESH=y
CONFIG_CFG80211=m
- # CONFIG_CFG80211_REG_DEBUG is not set
+ # CONFIG_CFG80211_REG_DEBUG=y
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_WEP=m
@@ -14,47 +12,80 @@ Index: compat-wireless-2009-03-13/config.mk
+# CONFIG_LIB80211_CRYPT_WEP=m
+# CONFIG_LIB80211_CRYPT_CCMP=m
+# CONFIG_LIB80211_CRYPT_TKIP=m
+ # CONFIG_LIB80211_DEBUG=y
CONFIG_NL80211=y
+@@ -128,54 +128,54 @@ CONFIG_ATH9K=m
+ # CONFIG_ATH9K_DEBUG=y
-@@ -129,18 +129,18 @@ CONFIG_IWL3945_LEDS=y
+-CONFIG_IWLWIFI=m
+-CONFIG_IWLWIFI_LEDS=y
++# CONFIG_IWLWIFI=m
++# CONFIG_IWLWIFI_LEDS=y
+ # CONFIG_IWLWIFI_RFKILL=y
+-CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
++# CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
+ # CONFIG_IWLWIFI_DEBUG=y
+ # CONFIG_IWLWIFI_DEBUGFS=y
+-CONFIG_IWLAGN=m
+-CONFIG_IWL4965=y
+-CONFIG_IWL5000=y
+-CONFIG_IWL3945=m
+-CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
++# CONFIG_IWLAGN=m
++# CONFIG_IWL4965=y
++# CONFIG_IWL5000=y
++# CONFIG_IWL3945=m
++# CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
- CONFIG_B43=m
+
+-CONFIG_B43=m
-CONFIG_B43_PCI_AUTOSELECT=y
-CONFIG_B43_PCICORE_AUTOSELECT=y
-CONFIG_B43_PCMCIA=y
-CONFIG_B43_PIO=y
-CONFIG_B43_LEDS=y
++# CONFIG_B43=m
+# CONFIG_B43_PCI_AUTOSELECT=y
+# CONFIG_B43_PCICORE_AUTOSELECT=y
+# CONFIG_B43_PCMCIA=y
+# CONFIG_B43_PIO=y
+# CONFIG_B43_LEDS=y
# CONFIG_B43_RFKILL=y
- # CONFIG_B43_DEBUG is not set
+ # CONFIG_B43_DEBUG=y
+ # CONFIG_B43_FORCE_PIO=y
- CONFIG_B43LEGACY=m
- CONFIG_B43LEGACY_PCI_AUTOSELECT=y
- CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+-CONFIG_B43LEGACY=m
+-CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+-CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
-CONFIG_B43LEGACY_LEDS=y
++# CONFIG_B43LEGACY=m
++# CONFIG_B43LEGACY_PCI_AUTOSELECT=y
++# CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+# CONFIG_B43LEGACY_LEDS=y
# CONFIG_B43LEGACY_RFKILL=y
# CONFIG_B43LEGACY_DEBUG=y
- CONFIG_B43LEGACY_DMA=y
-@@ -150,17 +150,17 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
- # CONFIG_B43LEGACY_PIO_MODE is not set
+-CONFIG_B43LEGACY_DMA=y
+-CONFIG_B43LEGACY_PIO=y
+-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
++# CONFIG_B43LEGACY_DMA=y
++# CONFIG_B43LEGACY_PIO=y
++# CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+ # CONFIG_B43LEGACY_DMA_MODE=y
+ # CONFIG_B43LEGACY_PIO_MODE=y
# The Intel ipws
-CONFIG_LIBIPW=m
+# CONFIG_LIBIPW=m
- # CONFIG_LIBIPW_DEBUG is not set
+ # CONFIG_LIBIPW_DEBUG=y
+
-CONFIG_IPW2100=m
-CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100=m
+# CONFIG_IPW2100_MONITOR=y
- # CONFIG_IPW2100_DEBUG is not set
+ # CONFIG_IPW2100_DEBUG=y
-CONFIG_IPW2200=m
-CONFIG_IPW2200_MONITOR=y
-CONFIG_IPW2200_RADIOTAP=y
@@ -65,52 +96,119 @@ Index: compat-wireless-2009-03-13/config.mk
+# CONFIG_IPW2200_RADIOTAP=y
+# CONFIG_IPW2200_PROMISCUOUS=y
+# CONFIG_IPW2200_QOS=y
- # CONFIG_IPW2200_DEBUG is not set
+ # CONFIG_IPW2200_DEBUG=y
# The above enables use a second interface prefixed 'rtap'.
# Example usage:
-@@ -176,13 +176,13 @@ CONFIG_IPW2200_QOS=y
+@@ -190,27 +190,27 @@ CONFIG_IPW2200_QOS=y
+ #
# % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
- CONFIG_SSB_BLOCKIO=y
+-CONFIG_SSB_BLOCKIO=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-+# CONFIG_SSB_PCIHOST_POSSIBLE=y
-+# CONFIG_SSB_PCIHOST=y
- CONFIG_SSB_B43_PCI_BRIDGE=y
+-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
-CONFIG_SSB_PCMCIAHOST=y
--CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
--CONFIG_SSB_DRIVER_PCICORE=y
++# CONFIG_SSB_BLOCKIO=y
++# CONFIG_SSB_PCIHOST_POSSIBLE=y
++# CONFIG_SSB_PCIHOST=y
++# CONFIG_SSB_B43_PCI_BRIDGE=y
+# CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+# CONFIG_SSB_PCMCIAHOST=y
+ # CONFIG_SSB_DEBUG=y
+-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+-CONFIG_SSB_DRIVER_PCICORE=y
+# CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+# CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_P54_PCI=m
-@@ -277,21 +277,21 @@ CONFIG_P54_COMMON=m
+-CONFIG_B44=m
+-CONFIG_B44_PCI_AUTOSELECT=y
+-CONFIG_B44_PCICORE_AUTOSELECT=y
+-CONFIG_B44_PCI=y
++# CONFIG_B44=m
++# CONFIG_B44_PCI_AUTOSELECT=y
++# CONFIG_B44_PCICORE_AUTOSELECT=y
++# CONFIG_B44_PCI=y
+
+-CONFIG_RTL8180=m
++# CONFIG_RTL8180=m
+
+-CONFIG_ADM8211=m
+-CONFIG_PCMCIA_ATMEL=m
++# CONFIG_ADM8211=m
++# CONFIG_PCMCIA_ATMEL=m
+
+ CONFIG_RT2X00_LIB_PCI=m
+ CONFIG_RT2400PCI=m
+@@ -226,16 +226,16 @@ CONFIG_RT61PCI=m
+ NEED_RT2X00_FIRMWARE=y
+ endif
+
+-CONFIG_ATMEL=m
+-CONFIG_PCI_ATMEL=m
++# CONFIG_ATMEL=m
++# CONFIG_PCI_ATMEL=m
+
+-CONFIG_MWL8K=m
++# CONFIG_MWL8K=m
+
+ endif
+ ## end of PCI
+
+ # This is required for some cards
+-CONFIG_EEPROM_93CX6=m
++# CONFIG_EEPROM_93CX6=m
+
+ # USB Drivers
+ ifneq ($(CONFIG_USB),)
+@@ -249,15 +249,15 @@ CONFIG_ZD1211RW=m
+ # is only wireless RNDIS chip known to date.
+ # Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
+ # it also requires new RNDIS_HOST and CDC_ETHER modules which we add
+-CONFIG_USB_NET_RNDIS_HOST=m
+-CONFIG_USB_NET_RNDIS_WLAN=m
+-CONFIG_USB_NET_CDCETHER=m
++# CONFIG_USB_NET_RNDIS_HOST=m
++# CONFIG_USB_NET_RNDIS_WLAN=m
++# CONFIG_USB_NET_CDCETHER=m
+
+
+ CONFIG_P54_USB=m
+-CONFIG_RTL8187=m
++# CONFIG_RTL8187=m
+
+-CONFIG_AT76C50X_USB=m
++# CONFIG_AT76C50X_USB=m
+
+ # RT2500USB does not require firmware
+ CONFIG_RT2500USB=m
+@@ -294,20 +294,20 @@ CONFIG_P54_COMMON=m
+
+
# Sonics Silicon Backplane
- CONFIG_SSB_POSSIBLE=y
- CONFIG_SSB=m
+-CONFIG_SSB_POSSIBLE=y
+-CONFIG_SSB=m
-CONFIG_SSB_SPROM=y
++# CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB=m
+# CONFIG_SSB_SPROM=y
- # CONFIG_SSB_DEBUG is not set
+ # CONFIG_SSB_DEBUG=y
ifneq ($(CONFIG_USB),)
ifneq ($(CONFIG_LIBERTAS_THINFIRM_USB),m)
- CONFIG_LIBERTAS_USB=m
+-CONFIG_LIBERTAS_USB=m
-NEED_LIBERTAS=y
-+#NEED_LIBERTAS=y
++# CONFIG_LIBERTAS_USB=m
++# NEED_LIBERTAS=y
endif
endif
ifneq ($(CONFIG_PCMCIA),)
- CONFIG_LIBERTAS_CS=m
+-CONFIG_LIBERTAS_CS=m
-NEED_LIBERTAS=y
-+#NEED_LIBERTAS=y
++# CONFIG_LIBERTAS_CS=m
++# NEED_LIBERTAS=y
endif
ifeq ($(NEED_LIBERTAS),y)
--CONFIG_LIBERTAS=m
-+#CONFIG_LIBERTAS=m
- # Libertas uses the old stack but not fully, it will soon
- # be cleaned.
- endif
+ CONFIG_LIBERTAS=m
diff --git a/package/mac80211/patches/201-ath5k_eeprom.patch b/package/mac80211/patches/201-ath5k_eeprom.patch
deleted file mode 100644
index b42110d..0000000
--- a/package/mac80211/patches/201-ath5k_eeprom.patch
+++ /dev/null
@@ -1,494 +0,0 @@
-Clean up the eeprom parsing code and prepare the pdgain
-data for 2413, which will be required for power calibration code.
-Also clean up some ugly line wrapping to make the code easier on
-the eyes.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-
---- a/drivers/net/wireless/ath5k/eeprom.c
-+++ b/drivers/net/wireless/ath5k/eeprom.c
-@@ -541,31 +541,30 @@ ath5k_eeprom_read_freq_list(struct ath5k
- {
- struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
- int o = *offset;
-- int i = 0;
-+ int i = 0 ;
- u8 freq1, freq2;
- int ret;
- u16 val;
-
-+ ee->ee_n_piers[mode] = 0;
- while(i < max) {
- AR5K_EEPROM_READ(o++, val);
-
-- freq1 = (val >> 8) & 0xff;
-- freq2 = val & 0xff;
-+ freq1 = val & 0xff;
-+ if (!freq1)
-+ break;
-
-- if (freq1) {
-- pc[i++].freq = ath5k_eeprom_bin2freq(ee,
-- freq1, mode);
-- ee->ee_n_piers[mode]++;
-- }
-+ pc[i++].freq = ath5k_eeprom_bin2freq(ee,
-+ freq1, mode);
-+ ee->ee_n_piers[mode]++;
-
-- if (freq2) {
-- pc[i++].freq = ath5k_eeprom_bin2freq(ee,
-- freq2, mode);
-- ee->ee_n_piers[mode]++;
-- }
--
-- if (!freq1 || !freq2)
-+ freq2 = (val >> 8) & 0xff;
-+ if (!freq2)
- break;
-+
-+ pc[i++].freq = ath5k_eeprom_bin2freq(ee,
-+ freq2, mode);
-+ ee->ee_n_piers[mode]++;
- }
-
- /* return new offset */
-@@ -918,84 +917,46 @@ ath5k_cal_data_offset_2413(struct ath5k_
- * curves on eeprom. The final curve (higher power) has an extra
- * point for better accuracy like RF5112.
- */
-+
- static int
--ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode)
-+ath5k_eeprom_parse_pcal_info_2413(struct ath5k_hw *ah, int mode, u32 offset,
-+ struct ath5k_chan_pcal_info *chinfo)
- {
- struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-- struct ath5k_chan_pcal_info_rf2413 *chan_pcal_info;
-- struct ath5k_chan_pcal_info *gen_chan_info;
-- unsigned int i, c;
-- u32 offset;
-+ struct ath5k_chan_pcal_info_rf2413 *pcinfo;
-+ unsigned int i;
- int ret;
- u16 val;
-- u8 pd_gains = 0;
--
-- if (ee->ee_x_gain[mode] & 0x1) pd_gains++;
-- if ((ee->ee_x_gain[mode] >> 1) & 0x1) pd_gains++;
-- if ((ee->ee_x_gain[mode] >> 2) & 0x1) pd_gains++;
-- if ((ee->ee_x_gain[mode] >> 3) & 0x1) pd_gains++;
-- ee->ee_pd_gains[mode] = pd_gains;
--
-- offset = ath5k_cal_data_offset_2413(ee, mode);
-- ee->ee_n_piers[mode] = 0;
-- switch (mode) {
-- case AR5K_EEPROM_MODE_11A:
-- if (!AR5K_EEPROM_HDR_11A(ee->ee_header))
-- return 0;
--
-- ath5k_eeprom_init_11a_pcal_freq(ah, offset);
-- offset += AR5K_EEPROM_N_5GHZ_CHAN / 2;
-- gen_chan_info = ee->ee_pwr_cal_a;
-- break;
-- case AR5K_EEPROM_MODE_11B:
-- if (!AR5K_EEPROM_HDR_11B(ee->ee_header))
-- return 0;
-+ u8 pd_gains;
-
-- ath5k_eeprom_init_11bg_2413(ah, mode, offset);
-- offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2;
-- gen_chan_info = ee->ee_pwr_cal_b;
-- break;
-- case AR5K_EEPROM_MODE_11G:
-- if (!AR5K_EEPROM_HDR_11G(ee->ee_header))
-- return 0;
--
-- ath5k_eeprom_init_11bg_2413(ah, mode, offset);
-- offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2;
-- gen_chan_info = ee->ee_pwr_cal_g;
-- break;
-- default:
-- return -EINVAL;
-- }
-+ pd_gains = ee->ee_pd_gains[mode];
-
- if (pd_gains == 0)
- return 0;
-
- for (i = 0; i < ee->ee_n_piers[mode]; i++) {
-- chan_pcal_info = &gen_chan_info[i].rf2413_info;
-+ pcinfo = &chinfo[i].rf2413_info;
-
- /*
- * Read pwr_i, pddac_i and the first
- * 2 pd points (pwr, pddac)
- */
- AR5K_EEPROM_READ(offset++, val);
-- chan_pcal_info->pwr_i[0] = val & 0x1f;
-- chan_pcal_info->pddac_i[0] = (val >> 5) & 0x7f;
-- chan_pcal_info->pwr[0][0] =
-- (val >> 12) & 0xf;
-+ pcinfo->pwr_i[0] = val & 0x1f;
-+ pcinfo->pddac_i[0] = (val >> 5) & 0x7f;
-+ pcinfo->pwr[0][0] = (val >> 12) & 0xf;
-
- AR5K_EEPROM_READ(offset++, val);
-- chan_pcal_info->pddac[0][0] = val & 0x3f;
-- chan_pcal_info->pwr[0][1] = (val >> 6) & 0xf;
-- chan_pcal_info->pddac[0][1] =
-- (val >> 10) & 0x3f;
-+ pcinfo->pddac[0][0] = val & 0x3f;
-+ pcinfo->pwr[0][1] = (val >> 6) & 0xf;
-+ pcinfo->pddac[0][1] = (val >> 10) & 0x3f;
-
- AR5K_EEPROM_READ(offset++, val);
-- chan_pcal_info->pwr[0][2] = val & 0xf;
-- chan_pcal_info->pddac[0][2] =
-- (val >> 4) & 0x3f;
-+ pcinfo->pwr[0][2] = val & 0xf;
-+ pcinfo->pddac[0][2] = (val >> 4) & 0x3f;
-
-- chan_pcal_info->pwr[0][3] = 0;
-- chan_pcal_info->pddac[0][3] = 0;
-+ pcinfo->pwr[0][3] = 0;
-+ pcinfo->pddac[0][3] = 0;
-
- if (pd_gains > 1) {
- /*
-@@ -1003,44 +964,36 @@ ath5k_eeprom_read_pcal_info_2413(struct
- * so it only has 2 pd points.
- * Continue wih pd gain 1.
- */
-- chan_pcal_info->pwr_i[1] = (val >> 10) & 0x1f;
-+ pcinfo->pwr_i[1] = (val >> 10) & 0x1f;
-
-- chan_pcal_info->pddac_i[1] = (val >> 15) & 0x1;
-+ pcinfo->pddac_i[1] = (val >> 15) & 0x1;
- AR5K_EEPROM_READ(offset++, val);
-- chan_pcal_info->pddac_i[1] |= (val & 0x3F) << 1;
-+ pcinfo->pddac_i[1] |= (val & 0x3F) << 1;
-
-- chan_pcal_info->pwr[1][0] = (val >> 6) & 0xf;
-- chan_pcal_info->pddac[1][0] =
-- (val >> 10) & 0x3f;
-+ pcinfo->pwr[1][0] = (val >> 6) & 0xf;
-+ pcinfo->pddac[1][0] = (val >> 10) & 0x3f;
-
- AR5K_EEPROM_READ(offset++, val);
-- chan_pcal_info->pwr[1][1] = val & 0xf;
-- chan_pcal_info->pddac[1][1] =
-- (val >> 4) & 0x3f;
-- chan_pcal_info->pwr[1][2] =
-- (val >> 10) & 0xf;
-+ pcinfo->pwr[1][1] = val & 0xf;
-+ pcinfo->pddac[1][1] = (val >> 4) & 0x3f;
-+ pcinfo->pwr[1][2] = (val >> 10) & 0xf;
-
-- chan_pcal_info->pddac[1][2] =
-- (val >> 14) & 0x3;
-+ pcinfo->pddac[1][2] = (val >> 14) & 0x3;
- AR5K_EEPROM_READ(offset++, val);
-- chan_pcal_info->pddac[1][2] |=
-- (val & 0xF) << 2;
-+ pcinfo->pddac[1][2] |= (val & 0xF) << 2;
-
-- chan_pcal_info->pwr[1][3] = 0;
-- chan_pcal_info->pddac[1][3] = 0;
-+ pcinfo->pwr[1][3] = 0;
-+ pcinfo->pddac[1][3] = 0;
- } else if (pd_gains == 1) {
- /*
- * Pd gain 0 is the last one so
- * read the extra point.
- */
-- chan_pcal_info->pwr[0][3] =
-- (val >> 10) & 0xf;
-+ pcinfo->pwr[0][3] = (val >> 10) & 0xf;
-
-- chan_pcal_info->pddac[0][3] =
-- (val >> 14) & 0x3;
-+ pcinfo->pddac[0][3] = (val >> 14) & 0x3;
- AR5K_EEPROM_READ(offset++, val);
-- chan_pcal_info->pddac[0][3] |=
-- (val & 0xF) << 2;
-+ pcinfo->pddac[0][3] |= (val & 0xF) << 2;
- }
-
- /*
-@@ -1048,105 +1001,159 @@ ath5k_eeprom_read_pcal_info_2413(struct
- * as above.
- */
- if (pd_gains > 2) {
-- chan_pcal_info->pwr_i[2] = (val >> 4) & 0x1f;
-- chan_pcal_info->pddac_i[2] = (val >> 9) & 0x7f;
-+ pcinfo->pwr_i[2] = (val >> 4) & 0x1f;
-+ pcinfo->pddac_i[2] = (val >> 9) & 0x7f;
-
- AR5K_EEPROM_READ(offset++, val);
-- chan_pcal_info->pwr[2][0] =
-- (val >> 0) & 0xf;
-- chan_pcal_info->pddac[2][0] =
-- (val >> 4) & 0x3f;
-- chan_pcal_info->pwr[2][1] =
-- (val >> 10) & 0xf;
--
-- chan_pcal_info->pddac[2][1] =
-- (val >> 14) & 0x3;
-- AR5K_EEPROM_READ(offset++, val);
-- chan_pcal_info->pddac[2][1] |=
-- (val & 0xF) << 2;
--
-- chan_pcal_info->pwr[2][2] =
-- (val >> 4) & 0xf;
-- chan_pcal_info->pddac[2][2] =
-- (val >> 8) & 0x3f;
-+ pcinfo->pwr[2][0] = (val >> 0) & 0xf;
-+ pcinfo->pddac[2][0] = (val >> 4) & 0x3f;
-+ pcinfo->pwr[2][1] = (val >> 10) & 0xf;
-
-- chan_pcal_info->pwr[2][3] = 0;
-- chan_pcal_info->pddac[2][3] = 0;
-+ pcinfo->pddac[2][1] = (val >> 14) & 0x3;
-+ AR5K_EEPROM_READ(offset++, val);
-+ pcinfo->pddac[2][1] |= (val & 0xF) << 2;
-+
-+ pcinfo->pwr[2][2] = (val >> 4) & 0xf;
-+ pcinfo->pddac[2][2] = (val >> 8) & 0x3f;
-+
-+ pcinfo->pwr[2][3] = 0;
-+ pcinfo->pddac[2][3] = 0;
- } else if (pd_gains == 2) {
-- chan_pcal_info->pwr[1][3] =
-- (val >> 4) & 0xf;
-- chan_pcal_info->pddac[1][3] =
-- (val >> 8) & 0x3f;
-+ pcinfo->pwr[1][3] = (val >> 4) & 0xf;
-+ pcinfo->pddac[1][3] = (val >> 8) & 0x3f;
- }
-
- if (pd_gains > 3) {
-- chan_pcal_info->pwr_i[3] = (val >> 14) & 0x3;
-+ pcinfo->pwr_i[3] = (val >> 14) & 0x3;
- AR5K_EEPROM_READ(offset++, val);
-- chan_pcal_info->pwr_i[3] |= ((val >> 0) & 0x7) << 2;
-+ pcinfo->pwr_i[3] |= ((val >> 0) & 0x7) << 2;
-
-- chan_pcal_info->pddac_i[3] = (val >> 3) & 0x7f;
-- chan_pcal_info->pwr[3][0] =
-- (val >> 10) & 0xf;
-- chan_pcal_info->pddac[3][0] =
-- (val >> 14) & 0x3;
-+ pcinfo->pddac_i[3] = (val >> 3) & 0x7f;
-+ pcinfo->pwr[3][0] = (val >> 10) & 0xf;
-+ pcinfo->pddac[3][0] = (val >> 14) & 0x3;
-
- AR5K_EEPROM_READ(offset++, val);
-- chan_pcal_info->pddac[3][0] |=
-- (val & 0xF) << 2;
-- chan_pcal_info->pwr[3][1] =
-- (val >> 4) & 0xf;
-- chan_pcal_info->pddac[3][1] =
-- (val >> 8) & 0x3f;
-+ pcinfo->pddac[3][0] |= (val & 0xF) << 2;
-+ pcinfo->pwr[3][1] = (val >> 4) & 0xf;
-+ pcinfo->pddac[3][1] = (val >> 8) & 0x3f;
-
-- chan_pcal_info->pwr[3][2] =
-- (val >> 14) & 0x3;
-+ pcinfo->pwr[3][2] = (val >> 14) & 0x3;
- AR5K_EEPROM_READ(offset++, val);
-- chan_pcal_info->pwr[3][2] |=
-- ((val >> 0) & 0x3) << 2;
-+ pcinfo->pwr[3][2] |= ((val >> 0) & 0x3) << 2;
-
-- chan_pcal_info->pddac[3][2] =
-- (val >> 2) & 0x3f;
-- chan_pcal_info->pwr[3][3] =
-- (val >> 8) & 0xf;
-+ pcinfo->pddac[3][2] = (val >> 2) & 0x3f;
-+ pcinfo->pwr[3][3] = (val >> 8) & 0xf;
-
-- chan_pcal_info->pddac[3][3] =
-- (val >> 12) & 0xF;
-+ pcinfo->pddac[3][3] = (val >> 12) & 0xF;
- AR5K_EEPROM_READ(offset++, val);
-- chan_pcal_info->pddac[3][3] |=
-- ((val >> 0) & 0x3) << 4;
-+ pcinfo->pddac[3][3] |= ((val >> 0) & 0x3) << 4;
- } else if (pd_gains == 3) {
-- chan_pcal_info->pwr[2][3] =
-- (val >> 14) & 0x3;
-+ pcinfo->pwr[2][3] = (val >> 14) & 0x3;
- AR5K_EEPROM_READ(offset++, val);
-- chan_pcal_info->pwr[2][3] |=
-- ((val >> 0) & 0x3) << 2;
-+ pcinfo->pwr[2][3] |= ((val >> 0) & 0x3) << 2;
-
-- chan_pcal_info->pddac[2][3] =
-- (val >> 2) & 0x3f;
-+ pcinfo->pddac[2][3] = (val >> 2) & 0x3f;
- }
-+ }
-+ return 0;
-+}
-+
-+static int
-+ath5k_eeprom_convert_pcal_info_2413(struct ath5k_hw *ah, int mode,
-+ struct ath5k_chan_pcal_info *chinfo,
-+ unsigned int *xgains)
-+{
-+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-+ struct ath5k_chan_pcal_info_rf2413 *pcinfo;
-+ unsigned int i, j, k;
-
-- for (c = 0; c < pd_gains; c++) {
-- /* Recreate pwr table for this channel using pwr steps */
-- chan_pcal_info->pwr[c][0] += chan_pcal_info->pwr_i[c] * 2;
-- chan_pcal_info->pwr[c][1] += chan_pcal_info->pwr[c][0];
-- chan_pcal_info->pwr[c][2] += chan_pcal_info->pwr[c][1];
-- chan_pcal_info->pwr[c][3] += chan_pcal_info->pwr[c][2];
-- if (chan_pcal_info->pwr[c][3] == chan_pcal_info->pwr[c][2])
-- chan_pcal_info->pwr[c][3] = 0;
--
-- /* Recreate pddac table for this channel using pddac steps */
-- chan_pcal_info->pddac[c][0] += chan_pcal_info->pddac_i[c];
-- chan_pcal_info->pddac[c][1] += chan_pcal_info->pddac[c][0];
-- chan_pcal_info->pddac[c][2] += chan_pcal_info->pddac[c][1];
-- chan_pcal_info->pddac[c][3] += chan_pcal_info->pddac[c][2];
-- if (chan_pcal_info->pddac[c][3] == chan_pcal_info->pddac[c][2])
-- chan_pcal_info->pddac[c][3] = 0;
-+ /* prepare the raw values */
-+ for (i = 0; i < ee->ee_n_piers[mode]; i++) {
-+ pcinfo = &chinfo[i].rf2413_info;
-+ for (j = 0; j < ee->ee_pd_gains[mode]; j++) {
-+ unsigned int idx = xgains[j];
-+ struct ath5k_pdgain_info *pd = &pcinfo->pdgains[idx];
-+
-+ /* one more point for the highest power (lowest gain) */
-+ if (j == ee->ee_pd_gains[mode] - 1) {
-+ pd->n_vpd = AR5K_EEPROM_N_PD_POINTS;
-+ } else {
-+ pd->n_vpd = AR5K_EEPROM_N_PD_POINTS - 1;
-+ }
-+
-+ pd->vpd[0] = pcinfo->pddac_i[j];
-+ pd->pwr_t4[0] = 4 * pcinfo->pwr_i[j];
-+ for (k = 1; k < pd->n_vpd; k++) {
-+ pd->pwr_t4[k] = pd->pwr_t4[k - 1] + 2 * pcinfo->pwr[j][k - 1];
-+ pd->vpd[k] = pd->vpd[k - 1] + pcinfo->pddac[j][k - 1];
-+ }
- }
- }
-
- return 0;
- }
-
-+static int
-+ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode)
-+{
-+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-+ struct ath5k_chan_pcal_info *chinfo;
-+ unsigned int xgains[AR5K_EEPROM_N_PD_GAINS];
-+ u32 offset;
-+ u8 pd_gains = 0;
-+ int i, ret;
-+
-+ memset(xgains, 0, sizeof(xgains));
-+ for (i = 0; i < AR5K_EEPROM_N_PD_GAINS; i++) {
-+ int idx = AR5K_EEPROM_N_PD_GAINS - i - 1;
-+
-+ if ((ee->ee_x_gain[mode] >> idx) & 0x1)
-+ xgains[pd_gains++] = idx;
-+ }
-+ ee->ee_pd_gains[mode] = pd_gains;
-+
-+ offset = ath5k_cal_data_offset_2413(ee, mode);
-+ switch (mode) {
-+ case AR5K_EEPROM_MODE_11A:
-+ if (!AR5K_EEPROM_HDR_11A(ee->ee_header))
-+ return 0;
-+
-+ ath5k_eeprom_init_11a_pcal_freq(ah, offset);
-+ offset += AR5K_EEPROM_N_5GHZ_CHAN / 2;
-+ chinfo = ee->ee_pwr_cal_a;
-+ break;
-+ case AR5K_EEPROM_MODE_11B:
-+ if (!AR5K_EEPROM_HDR_11B(ee->ee_header))
-+ return 0;
-+
-+ ath5k_eeprom_init_11bg_2413(ah, mode, offset);
-+ offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2;
-+ chinfo = ee->ee_pwr_cal_b;
-+ break;
-+ case AR5K_EEPROM_MODE_11G:
-+ if (!AR5K_EEPROM_HDR_11G(ee->ee_header))
-+ return 0;
-+
-+ ath5k_eeprom_init_11bg_2413(ah, mode, offset);
-+ offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2;
-+ chinfo = ee->ee_pwr_cal_g;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+
-+ ret = ath5k_eeprom_parse_pcal_info_2413(ah, mode, offset, chinfo);
-+ if (ret)
-+ return ret;
-+
-+ ret = ath5k_eeprom_convert_pcal_info_2413(ah, mode, chinfo, xgains);
-+ if (ret)
-+ return ret;
-+
-+ return 0;
-+}
-+
- /*
- * Read per rate target power (this is the maximum tx power
- * supported by the card). This info is used when setting
-@@ -1264,6 +1271,7 @@ ath5k_eeprom_read_pcal_info(struct ath5k
- else
- read_pcal = ath5k_eeprom_read_pcal_info_5111;
-
-+
- for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) {
- err = read_pcal(ah, mode);
- if (err)
---- a/drivers/net/wireless/ath5k/eeprom.h
-+++ b/drivers/net/wireless/ath5k/eeprom.h
-@@ -266,15 +266,27 @@ struct ath5k_chan_pcal_info_rf5112 {
- u8 pcdac_x3[AR5K_EEPROM_N_XPD3_POINTS];
- };
-
-+
-+struct ath5k_pdgain_info {
-+ u16 n_vpd;
-+ u16 vpd[AR5K_EEPROM_N_PD_POINTS];
-+ s16 pwr_t4[AR5K_EEPROM_N_PD_POINTS];
-+};
-+
- struct ath5k_chan_pcal_info_rf2413 {
-+ /* --- EEPROM VALUES --- */
- /* Starting pwr/pddac values */
-- s8 pwr_i[AR5K_EEPROM_N_PD_GAINS];
-- u8 pddac_i[AR5K_EEPROM_N_PD_GAINS];
-+ s8 pwr_i[AR5K_EEPROM_N_PD_GAINS];
-+ u8 pddac_i[AR5K_EEPROM_N_PD_GAINS];
- /* (pwr,pddac) points */
-- s8 pwr[AR5K_EEPROM_N_PD_GAINS]
-- [AR5K_EEPROM_N_PD_POINTS];
-- u8 pddac[AR5K_EEPROM_N_PD_GAINS]
-- [AR5K_EEPROM_N_PD_POINTS];
-+ s8 pwr[AR5K_EEPROM_N_PD_GAINS]
-+ [AR5K_EEPROM_N_PD_POINTS];
-+ u8 pddac[AR5K_EEPROM_N_PD_GAINS]
-+ [AR5K_EEPROM_N_PD_POINTS];
-+
-+ /* --- RAW VALUES --- */
-+ struct ath5k_pdgain_info pdgains
-+ [AR5K_EEPROM_N_PD_GAINS];
- };
-
- struct ath5k_chan_pcal_info {
diff --git a/package/mac80211/patches/202-ath5k_txpower_2413.patch b/package/mac80211/patches/202-ath5k_txpower_2413.patch
deleted file mode 100644
index ddecd9e..0000000
--- a/package/mac80211/patches/202-ath5k_txpower_2413.patch
+++ /dev/null
@@ -1,672 +0,0 @@
-Implement the power curve interpolation, which is required for
-proper tx on 2413 and newer RF designs.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-
---- a/drivers/net/wireless/ath5k/phy.c
-+++ b/drivers/net/wireless/ath5k/phy.c
-@@ -4,6 +4,7 @@
- * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
- * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com>
- * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
-+ * Copyright (c) 2008-2009 Felix Fietkau <nbd@openwrt.org>
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
-@@ -1438,31 +1439,449 @@ unsigned int ath5k_hw_get_def_antenna(st
- */
-
- /*
-- * Initialize the tx power table (not fully implemented)
-+ * find the lower and upper index of the values in the table surrounding the target value
- */
--static void ath5k_txpower_table(struct ath5k_hw *ah,
-- struct ieee80211_channel *channel, s16 max_power)
-+static void
-+ath5k_get_table_index(const u16 *tbl, unsigned int tbl_sz, u16 target,
-+ unsigned int idx[2])
- {
-- unsigned int i, min, max, n;
-- u16 txpower, *rates;
-+ const u16 *ti;
-
-- rates = ah->ah_txpower.txp_rates;
-+ if (target < tbl[0]) {
-+ idx[0] = idx[1] = 0;
-+ return;
-+ }
-+
-+ if (target > tbl[tbl_sz - 1]) {
-+ idx[0] = idx[1] = tbl_sz - 1;
-+ return;
-+ }
-+
-+ /* look for the surrounding values */
-+ for (ti = tbl; ti < &tbl[tbl_sz - 1]; ti++) {
-+
-+ /* if the value is equal to the target, set lo = hi = index */
-+ if (*ti == target) {
-+ idx[0] = idx[1] = ti - tbl;
-+ return;
-+ }
-+
-+ /* if the target is between the current value and the next one,
-+ * set lo = cur, hi = lo + 1 */
-+ if (target < ti[1]) {
-+ idx[0] = ti - tbl;
-+ idx[1] = idx[0] + 1;
-+ return;
-+ }
-+ }
-+}
-+
-+/* find the lower and upper frequency info */
-+static void
-+ath5k_get_freq_tables(struct ath5k_hw *ah, struct ieee80211_channel *channel,
-+ struct ath5k_chan_pcal_info **pcinfo_l,
-+ struct ath5k_chan_pcal_info **pcinfo_r,
-+ struct ath5k_rate_pcal_info *rates)
-+{
-+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-+ struct ath5k_chan_pcal_info *pcinfo;
-+ unsigned int idx_l, idx_r;
-+ int mode, max, i;
-+ unsigned int target = channel->center_freq;
-+ struct ath5k_rate_pcal_info *rpinfo;
-+
-+ if (!(channel->hw_value & CHANNEL_OFDM)) {
-+ pcinfo = ee->ee_pwr_cal_b;
-+ rpinfo = ee->ee_rate_tpwr_b;
-+ mode = AR5K_EEPROM_MODE_11B;
-+ } else if (channel->hw_value & CHANNEL_2GHZ) {
-+ pcinfo = ee->ee_pwr_cal_g;
-+ rpinfo = ee->ee_rate_tpwr_g;
-+ mode = AR5K_EEPROM_MODE_11G;
-+ } else {
-+ pcinfo = ee->ee_pwr_cal_a;
-+ rpinfo = ee->ee_rate_tpwr_a;
-+ mode = AR5K_EEPROM_MODE_11A;
-+ }
-+ max = ee->ee_n_piers[mode] - 1;
-+
-+ if (target < pcinfo[0].freq) {
-+ idx_l = idx_r = 0;
-+ goto done;
-+ }
-+
-+ if (target > pcinfo[max].freq) {
-+ idx_l = idx_r = max;
-+ goto done;
-+ }
-+
-+ /* look for the surrounding values */
-+ for (i = 0; i <= max; i++) {
-+
-+ /* if the value is equal to the target, set lo = hi = index */
-+ if (pcinfo[i].freq == target) {
-+ idx_l = idx_r = i;
-+ goto done;
-+ }
-+
-+ /* if the target is between the current value and the next one,
-+ * set lo = cur, hi = lo + 1 */
-+ if (target < pcinfo[i].freq) {
-+ idx_l = i;
-+ idx_r = idx_l + 1;
-+ goto done;
-+ }
-+ }
-+
-+done:
-+ *pcinfo_l = &pcinfo[idx_l];
-+ *pcinfo_r = &pcinfo[idx_r];
-+
-+ if (!rates)
-+ return;
-+
-+ /* rate info minimum values */
-+ rates->freq = channel->center_freq;
-+ rates->target_power_6to24 =
-+ min(rpinfo[idx_l].target_power_6to24,
-+ rpinfo[idx_r].target_power_6to24);
-+ rates->target_power_36 =
-+ min(rpinfo[idx_l].target_power_36,
-+ rpinfo[idx_r].target_power_36);
-+ rates->target_power_48 =
-+ min(rpinfo[idx_l].target_power_48,
-+ rpinfo[idx_r].target_power_48);
-+ rates->target_power_54 =
-+ min(rpinfo[idx_l].target_power_54,
-+ rpinfo[idx_r].target_power_54);
-+}
-+
-+
-+/* Fill the VPD table for all indices between pmin and pmax */
-+static void
-+ath5k_fill_vpdtable(s16 pmin, s16 pmax, const s16 *pwr,
-+ const u16 *vpd, unsigned int intercepts,
-+ u16 vpdtable[AR5K_EEPROM_POWER_TABLE_SIZE])
-+{
-+ unsigned int idx[2] = { 0, 0 };
-+ s16 cur_pwr = 2 * pmin;
-+ int i;
-+
-+ if (intercepts < 2)
-+ return;
-+
-+ for(i = 0; i <= (pmax - pmin); i++) {
-+ ath5k_get_table_index(pwr, intercepts, cur_pwr, idx);
-+
-+ if (!idx[1])
-+ idx[1] = 1;
-+
-+ if (idx[0] == intercepts - 1)
-+ idx[0] = intercepts - 2;
-+
-+ if (pwr[idx[0]] == pwr[idx[1]])
-+ vpdtable[i] = vpd[idx[0]];
-+ else
-+ vpdtable[i] = (((cur_pwr - pwr[idx[0]]) * vpd[idx[1]] +
-+ (pwr[idx[1]] - cur_pwr) * vpd[idx[0]]) /
-+ (pwr[idx[1]] - pwr[idx[0]]));
-+
-+ cur_pwr += 2;
-+ }
-+}
-+
-+static inline s16
-+ath5k_interpolate_signed(u16 ref, u16 ref_l, u16 ref_r, s16 val_l, s16 val_r)
-+{
-+ if (ref_l == ref_r)
-+ return val_l;
-+
-+ return ((ref - ref_l)*val_r + (ref_r - ref)*val_l) / (ref_r - ref_l);
-+}
-+
-+static inline s16
-+ath5k_get_min_power_2413(struct ath5k_chan_pcal_info *pcinfo)
-+{
-+ struct ath5k_pdgain_info *pd;
-+ int i;
-+
-+ /* backwards - highest pdgain == lowest power */
-+ for (i = AR5K_EEPROM_N_PD_GAINS - 1; i >= 0; i--) {
-+ pd = &pcinfo->rf2413_info.pdgains[i];
-+ if (!pd->n_vpd)
-+ continue;
-+
-+ return pd->pwr_t4[0];
-+ }
-+ return 0;
-+}
-+
-+static inline s16
-+ath5k_get_max_power_2413(struct ath5k_chan_pcal_info *pcinfo)
-+{
-+ struct ath5k_pdgain_info *pd;
-+ int i;
-+
-+ /* forwards: lowest pdgain == highest power */
-+ for (i = 0; i < AR5K_EEPROM_N_PD_GAINS; i++) {
-+ pd = &pcinfo->rf2413_info.pdgains[i];
-+ if (!pd->n_vpd)
-+ continue;
-+
-+ return pd->pwr_t4[pd->n_vpd];
-+ }
-+ return 0;
-+}
-+
-+
-+
-+static int
-+ath5k_txpower_table_2413(struct ath5k_hw *ah, struct ieee80211_channel *ch,
-+ struct ath5k_chan_pcal_info *pcinfo_l,
-+ struct ath5k_chan_pcal_info *pcinfo_r)
-+{
-+ struct ath5k_pdgain_info *pd_l, *pd_r;
-+ u16 gain_boundaries[4];
-+ u16 *xpd = ah->ah_txpower.txp_xpd;
-+ int n_xpd = 0;
-+ s16 pmin_t2[AR5K_EEPROM_N_PD_GAINS];
-+ s16 pmax_t2[AR5K_EEPROM_N_PD_GAINS];
-+ u16 *pdadc_out = ah->ah_txpower.txp_pcdac;
-+ unsigned int gain_overlap;
-+ unsigned int vpd_size, target_idx, max_idx;
-+ unsigned int n_pdadc = 0;
-+ u16 vpd_step;
-+ u16 *pcdacL;
-+ u16 *pcdacR;
-+ int i, j, s;
-+ u32 reg;
-+ s16 ch_pmin, ch_pmax;
-+
-+ gain_overlap = ath5k_hw_reg_read(ah, AR5K_PHY_TPC_RG5) &
-+ AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP;
-+
-+ /* loop backwards over pdgains (highest pdgain == lowest power) */
-+ for (i = AR5K_EEPROM_N_PD_GAINS - 1; i >= 0; i--) {
-+ pd_l = &pcinfo_l->rf2413_info.pdgains[i];
-+ pd_r = &pcinfo_r->rf2413_info.pdgains[i];
-+ pcdacL = ah->ah_txpower.txp_rfdata.rf2413.pcdacL[n_xpd];
-+ pcdacR = ah->ah_txpower.txp_rfdata.rf2413.pcdacR[n_xpd];
-+
-+ if (!pd_l->n_vpd)
-+ continue;
-+
-+ xpd[n_xpd] = i;
-+
-+ pmin_t2[n_xpd] = min(pd_l->pwr_t4[0], pd_r->pwr_t4[0]) / 2;
-+ pmax_t2[n_xpd] = min(pd_l->pwr_t4[pd_l->n_vpd - 1],
-+ pd_r->pwr_t4[pd_r->n_vpd - 1]) / 2;
-+
-+ if ((u16) (pmax_t2[n_xpd] - pmin_t2[n_xpd]) > 64)
-+ continue;
-+
-+ /* fill vpd tables for left and right frequency info */
-+ ath5k_fill_vpdtable(pmin_t2[n_xpd], pmax_t2[n_xpd],
-+ pd_l->pwr_t4, pd_l->vpd, pd_l->n_vpd, pcdacL);
-+
-+ /* check if interpolation is necessary */
-+ if (pcinfo_l == pcinfo_r)
-+ continue;
-+
-+ ath5k_fill_vpdtable(pmin_t2[n_xpd], pmax_t2[n_xpd],
-+ pd_r->pwr_t4, pd_r->vpd, pd_r->n_vpd, pcdacR);
-+
-+ /* interpolate pcdac values,
-+ * reuse pcdacL table for interpolation output */
-+ for (j = 0; j < (u16) (pmax_t2[n_xpd] - pmin_t2[n_xpd]); j++) {
-+ pcdacL[j] = ath5k_interpolate_signed(ch->center_freq,
-+ pcinfo_l->freq, pcinfo_r->freq,
-+ (s16) pcdacL[j], (s16) pcdacR[j]);
-+ }
-+ n_xpd++;
-+ }
-+
-+ if (!n_xpd)
-+ return 0;
-+
-+ /* create final table */
-+ for (i = 0, n_pdadc = 0; i < n_xpd; i++) {
-+ pcdacL = ah->ah_txpower.txp_rfdata.rf2413.pcdacL[i];
-+
-+ if (i == n_xpd - 1) {
-+ /* 2 db boundary stretch */
-+ gain_boundaries[i] = pmax_t2[i] + 4;
-+ } else {
-+ gain_boundaries[i] = (pmax_t2[i] + pmin_t2[i + 1]) / 2;
-+ }
-+
-+ if (gain_boundaries[i] > AR5K_TUNE_MAX_TXPOWER)
-+ gain_boundaries[i] = AR5K_TUNE_MAX_TXPOWER;
-+
-+ /* find starting index */
-+ if (i == 0)
-+ s = 0;
-+ else
-+ s = (gain_boundaries[i - 1] - pmin_t2[i]) -
-+ gain_overlap;
-+
-+ if (pcdacL[1] > pcdacL[0])
-+ vpd_step = pcdacL[1] - pcdacL[0];
-+ else
-+ vpd_step = 1;
-+
-+ /* if s is below 0, we need to extrapolate below this pdgain */
-+ while ((s < 0) && (n_pdadc < 128)) {
-+ s16 tmp = pcdacL[0] + s * vpd_step;
-+ pdadc_out[n_pdadc++] = (u16) ((tmp < 0) ? 0 : tmp);
-+ s++;
-+ }
-+
-+ vpd_size = pmax_t2[i] - pmin_t2[i];
-+ target_idx = gain_boundaries[i] + gain_overlap - pmin_t2[i];
-+ max_idx = (target_idx < vpd_size) ? target_idx : vpd_size;
-+
-+ while ((s < (s16) max_idx) && (n_pdadc < 128))
-+ pdadc_out[n_pdadc++] = pcdacL[s++];
-+
-+ /* need to extrapolate above this pdgain? */
-+ if (target_idx <= max_idx)
-+ continue;
-
-- txpower = AR5K_TUNE_DEFAULT_TXPOWER * 2;
-- if (max_power > txpower)
-- txpower = max_power > AR5K_TUNE_MAX_TXPOWER ?
-- AR5K_TUNE_MAX_TXPOWER : max_power;
-+ if (pcdacL[vpd_size - 1] > pcdacL[vpd_size - 2])
-+ vpd_step = pcdacL[vpd_size - 1] - pcdacL[vpd_size - 2];
-+ else
-+ vpd_step = 1;
-
-- for (i = 0; i < AR5K_MAX_RATES; i++)
-- rates[i] = txpower;
-+ while ((s < (s16) target_idx) && (n_pdadc < 128)) {
-+ int tmp = pcdacL[vpd_size - 1] +
-+ (s - max_idx) * vpd_step;
-+ pdadc_out[n_pdadc++] = (tmp > 127) ? 127 : tmp;
-+ s++;
-+ }
-+ }
-
-- /* XXX setup target powers by rate */
-+ while (i < AR5K_EEPROM_N_PD_GAINS) {
-+ gain_boundaries[i] = gain_boundaries[i - 1];
-+ i++;
-+ }
-+
-+ while (n_pdadc < 128) {
-+ pdadc_out[n_pdadc] = pdadc_out[n_pdadc - 1];
-+ n_pdadc++;
-+ }
-+
-+ /* select the right xpdgain curves */
-+ reg = ath5k_hw_reg_read(ah, AR5K_PHY_TPC_RG1);
-+ reg &= ~(AR5K_PHY_TPC_RG1_PDGAIN_1 |
-+ AR5K_PHY_TPC_RG1_PDGAIN_2 |
-+ AR5K_PHY_TPC_RG1_PDGAIN_3 |
-+ AR5K_PHY_TPC_RG1_NUM_PD_GAIN);
-+ reg |= AR5K_REG_SM(n_xpd, AR5K_PHY_TPC_RG1_NUM_PD_GAIN);
-+ switch(n_xpd) {
-+ case 3:
-+ reg |= AR5K_REG_SM(xpd[2], AR5K_PHY_TPC_RG1_PDGAIN_3);
-+ /* fall through */
-+ case 2:
-+ reg |= AR5K_REG_SM(xpd[1], AR5K_PHY_TPC_RG1_PDGAIN_2);
-+ /* fall through */
-+ case 1:
-+ reg |= AR5K_REG_SM(xpd[0], AR5K_PHY_TPC_RG1_PDGAIN_1);
-+ break;
-+ }
-+ ath5k_hw_reg_write(ah, reg, AR5K_PHY_TPC_RG1);
-
-+ /*
-+ * Write TX power values
-+ */
-+ reg = AR5K_PHY_PDADC_TXPOWER_BASE;
-+ for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) {
-+ ath5k_hw_reg_write(ah,
-+ ((pdadc_out[4*i + 0] & 0xff) << 0) |
-+ ((pdadc_out[4*i + 1] & 0xff) << 8) |
-+ ((pdadc_out[4*i + 2] & 0xff) << 16) |
-+ ((pdadc_out[4*i + 3] & 0xff) << 24), reg);
-+ reg += 4;
-+ }
-+
-+ ath5k_hw_reg_write(ah,
-+ AR5K_REG_SM(gain_overlap,
-+ AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP) |
-+ AR5K_REG_SM(gain_boundaries[0],
-+ AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1) |
-+ AR5K_REG_SM(gain_boundaries[1],
-+ AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2) |
-+ AR5K_REG_SM(gain_boundaries[2],
-+ AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3) |
-+ AR5K_REG_SM(gain_boundaries[3],
-+ AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4),
-+ AR5K_PHY_TPC_RG5);
-+
-+ ah->ah_txpower.txp_offset = pmin_t2[0];
-+
-+ /* look up power boundaries for this channel */
-+ ch_pmin = ath5k_get_min_power_2413(pcinfo_l);
-+ ch_pmax = ath5k_get_max_power_2413(pcinfo_l);
-+
-+ if (pcinfo_l != pcinfo_r) {
-+ s16 pwr_r;
-+
-+ pwr_r = ath5k_get_min_power_2413(pcinfo_r);
-+ ch_pmin = ath5k_interpolate_signed(ch->center_freq,
-+ pcinfo_l->freq, pcinfo_r->freq,
-+ ch_pmin, pwr_r);
-+
-+ pwr_r = ath5k_get_max_power_2413(pcinfo_r);
-+ ch_pmax = ath5k_interpolate_signed(ch->center_freq,
-+ pcinfo_l->freq, pcinfo_r->freq,
-+ ch_pmax, pwr_r);
-+ }
-+ ah->ah_txpower.txp_min = ch_pmin;
-+ ah->ah_txpower.txp_max = ch_pmax;
-+
-+ return 0;
-+}
-+
-+static void
-+ath5k_setup_rate_table(struct ath5k_hw *ah, u16 max_pwr,
-+ struct ath5k_rate_pcal_info *rate_info)
-+{
-+ unsigned int i;
-+ u16 *rates;
-+
-+ max_pwr *= 2;
-+ max_pwr = min(max_pwr, (u16) ah->ah_txpower.txp_max);
-+
-+ /* apply rate limits */
-+ rates = ah->ah_txpower.txp_rates;
-+ for (i = 0; i < 5; i++) {
-+ rates[i] = min(max_pwr, rate_info->target_power_6to24);
-+ }
-+ rates[5] = min(rates[0], rate_info->target_power_36);
-+ rates[6] = min(rates[0], rate_info->target_power_48);
-+ rates[7] = min(rates[0], rate_info->target_power_54);
-+ rates[8] = min(rates[0], rate_info->target_power_6to24);
-+ rates[9] = min(rates[0], rate_info->target_power_36);
-+ rates[10] = min(rates[0], rate_info->target_power_36);
-+ rates[11] = min(rates[0], rate_info->target_power_48);
-+ rates[12] = min(rates[0], rate_info->target_power_48);
-+ rates[13] = min(rates[0], rate_info->target_power_54);
-+ rates[14] = min(rates[0], rate_info->target_power_54);
-+
-+ ah->ah_txpower.txp_tpc = max_pwr;
- ah->ah_txpower.txp_min = rates[7];
-- ah->ah_txpower.txp_max = rates[0];
-- ah->ah_txpower.txp_ofdm = rates[0];
-+ ah->ah_txpower.txp_max = min(ah->ah_txpower.txp_max,
-+ (s16) rate_info->target_power_36);
-+ ah->ah_txpower.txp_ofdm = ah->ah_txpower.txp_max;
-+}
-+
-+static int
-+ath5k_txpower_table(struct ath5k_hw *ah, struct ieee80211_channel *ch,
-+ struct ath5k_chan_pcal_info *pcinfo_l,
-+ struct ath5k_chan_pcal_info *pcinfo_r,
-+ u16 max_pwr)
-+{
-+ unsigned int i, min, max, n;
-
-- /* Calculate the power table */
- n = ARRAY_SIZE(ah->ah_txpower.txp_pcdac);
- min = AR5K_EEPROM_PCDAC_START;
- max = AR5K_EEPROM_PCDAC_STOP;
-@@ -1473,51 +1892,64 @@ static void ath5k_txpower_table(struct a
- #else
- min;
- #endif
-+
-+ /*
-+ * Write TX power values
-+ */
-+ for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) {
-+ ath5k_hw_reg_write(ah,
-+ ((((ah->ah_txpower.txp_pcdac[(i << 1) + 1] << 8) |
-+ 0xff) & 0xffff) << 16) |
-+ (((ah->ah_txpower.txp_pcdac[(i << 1) ] << 8) |
-+ 0xff) & 0xffff),
-+ AR5K_PHY_PCDAC_TXPOWER(i));
-+ }
-+ return 0;
- }
-
-+
- /*
- * Set transmition power
- */
--int /*O.K. - txpower_table is unimplemented so this doesn't work*/
-+int
- ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
- unsigned int txpower)
- {
-+ struct ath5k_chan_pcal_info *pcinfo_l, *pcinfo_r;
-+ struct ath5k_rate_pcal_info rate_info;
- bool tpc = ah->ah_txpower.txp_tpc;
-- unsigned int i;
-
- ATH5K_TRACE(ah->ah_sc);
- if (txpower > AR5K_TUNE_MAX_TXPOWER) {
- ATH5K_ERR(ah->ah_sc, "invalid tx power: %u\n", txpower);
- return -EINVAL;
- }
--
-- /*
-- * RF2413 for some reason can't
-- * transmit anything if we call
-- * this funtion, so we skip it
-- * until we fix txpower.
-- *
-- * XXX: Assume same for RF2425
-- * to be safe.
-- */
-- if ((ah->ah_radio == AR5K_RF2413) || (ah->ah_radio == AR5K_RF2425))
-- return 0;
-+ if (txpower == 0)
-+ txpower = AR5K_TUNE_MAX_TXPOWER;
-
- /* Reset TX power values */
- memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower));
- ah->ah_txpower.txp_tpc = tpc;
-+ ah->ah_txpower.txp_min = 0;
-+ ah->ah_txpower.txp_max = AR5K_TUNE_MAX_TXPOWER;
-
-- /* Initialize TX power table */
-- ath5k_txpower_table(ah, channel, txpower);
-+ /* find matching frequency info */
-+ ath5k_get_freq_tables(ah, channel, &pcinfo_l, &pcinfo_r, &rate_info);
-+ ath5k_setup_rate_table(ah, txpower, &rate_info);
-
-- /*
-- * Write TX power values
-- */
-- for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) {
-- ath5k_hw_reg_write(ah,
-- ((((ah->ah_txpower.txp_pcdac[(i << 1) + 1] << 8) | 0xff) & 0xffff) << 16) |
-- (((ah->ah_txpower.txp_pcdac[(i << 1) ] << 8) | 0xff) & 0xffff),
-- AR5K_PHY_PCDAC_TXPOWER(i));
-+ /* Initialize TX power table */
-+ switch(ah->ah_radio) {
-+ case AR5K_RF2413:
-+ case AR5K_RF5413:
-+ ath5k_txpower_table_2413(ah, channel, pcinfo_l, pcinfo_r);
-+ break;
-+ case AR5K_RF2425:
-+ /* unimplemented */
-+ return 0;
-+ default:
-+ /* Default power table */
-+ ath5k_txpower_table(ah, channel, pcinfo_l, pcinfo_r, txpower);
-+ break;
- }
-
- ath5k_hw_reg_write(ah, AR5K_TXPOWER_OFDM(3, 24) |
-@@ -1536,12 +1968,19 @@ ath5k_hw_txpower(struct ath5k_hw *ah, st
- AR5K_TXPOWER_CCK(13, 16) | AR5K_TXPOWER_CCK(12, 8) |
- AR5K_TXPOWER_CCK(11, 0), AR5K_PHY_TXPOWER_RATE4);
-
-- if (ah->ah_txpower.txp_tpc)
-+ if (ah->ah_txpower.txp_tpc) {
- ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE |
- AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX);
-- else
-+
-+ ath5k_hw_reg_write(ah,
-+ AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_ACK) |
-+ AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CTS) |
-+ AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CHIRP),
-+ AR5K_TPC);
-+ } else {
- ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX |
- AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX);
-+ }
-
- return 0;
- }
---- a/drivers/net/wireless/ath5k/ath5k.h
-+++ b/drivers/net/wireless/ath5k/ath5k.h
-@@ -204,7 +204,7 @@
- #define AR5K_TUNE_CWMAX_11B 1023
- #define AR5K_TUNE_CWMAX_XR 7
- #define AR5K_TUNE_NOISE_FLOOR -72
--#define AR5K_TUNE_MAX_TXPOWER 60
-+#define AR5K_TUNE_MAX_TXPOWER 63
- #define AR5K_TUNE_DEFAULT_TXPOWER 30
- #define AR5K_TUNE_TPC_TXPOWER true
- #define AR5K_TUNE_ANT_DIVERSITY true
-@@ -1085,11 +1085,23 @@ struct ath5k_hw {
- struct ath5k_gain ah_gain;
- u8 ah_offset[AR5K_MAX_RF_BANKS];
-
-+
- struct {
-- u16 txp_pcdac[AR5K_EEPROM_POWER_TABLE_SIZE];
-+ union {
-+ struct {
-+ /* Temporary PCDAC tables for interpolation */
-+ u16 pcdacL[AR5K_EEPROM_N_PD_GAINS]
-+ [AR5K_EEPROM_POWER_TABLE_SIZE];
-+ u16 pcdacR[AR5K_EEPROM_N_PD_GAINS]
-+ [AR5K_EEPROM_POWER_TABLE_SIZE];
-+ } rf2413;
-+ } txp_rfdata;
-+ u16 txp_xpd[AR5K_EEPROM_N_XPD_PER_CHANNEL];
-+ u16 txp_pcdac[AR5K_EEPROM_POWER_TABLE_SIZE * 2];
- u16 txp_rates[AR5K_MAX_RATES];
- s16 txp_min;
- s16 txp_max;
-+ s16 txp_offset;
- bool txp_tpc;
- s16 txp_ofdm;
- } ah_txpower;
---- a/drivers/net/wireless/ath5k/reg.h
-+++ b/drivers/net/wireless/ath5k/reg.h
-@@ -1552,6 +1552,15 @@
-
-
- /*===5212 Specific PCU registers===*/
-+#define AR5K_TPC 0x80e8
-+#define AR5K_TPC_ACK 0x0000003f /* ack frames */
-+#define AR5K_TPC_ACK_S 0
-+#define AR5K_TPC_CTS 0x00003f00 /* cts frames */
-+#define AR5K_TPC_CTS_S 8
-+#define AR5K_TPC_CHIRP 0x003f0000 /* chirp frames */
-+#define AR5K_TPC_CHIRP_S 16
-+#define AR5K_TPC_DOPPLER 0x0f000000 /* doppler chirp span */
-+#define AR5K_TPC_DOPPLER_S 24
-
- /*
- * XR (eXtended Range) mode register
-@@ -2550,6 +2559,12 @@
- #define AR5K_PHY_TPC_RG1 0xa258
- #define AR5K_PHY_TPC_RG1_NUM_PD_GAIN 0x0000c000
- #define AR5K_PHY_TPC_RG1_NUM_PD_GAIN_S 14
-+#define AR5K_PHY_TPC_RG1_PDGAIN_1 0x00030000
-+#define AR5K_PHY_TPC_RG1_PDGAIN_1_S 16
-+#define AR5K_PHY_TPC_RG1_PDGAIN_2 0x000c0000
-+#define AR5K_PHY_TPC_RG1_PDGAIN_2_S 18
-+#define AR5K_PHY_TPC_RG1_PDGAIN_3 0x00300000
-+#define AR5K_PHY_TPC_RG1_PDGAIN_3_S 20
-
- #define AR5K_PHY_TPC_RG5 0xa26C
- #define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP 0x0000000F
---- a/drivers/net/wireless/ath5k/desc.c
-+++ b/drivers/net/wireless/ath5k/desc.c
-@@ -194,6 +194,10 @@ static int ath5k_hw_setup_4word_tx_desc(
- return -EINVAL;
- }
-
-+ tx_power += ah->ah_txpower.txp_offset;
-+ if (tx_power > AR5K_TUNE_MAX_TXPOWER)
-+ tx_power = AR5K_TUNE_MAX_TXPOWER;
-+
- /* Clear descriptor */
- memset(&desc->ud.ds_tx5212, 0, sizeof(struct ath5k_hw_5212_tx_desc));
-
diff --git a/package/mac80211/patches/300-rt2x00-Move-Move-pci_dev-specific-access-to-rt2x00p.patch b/package/mac80211/patches/300-rt2x00-Move-Move-pci_dev-specific-access-to-rt2x00p.patch
new file mode 100644
index 0000000..91f5a2a
--- /dev/null
+++ b/package/mac80211/patches/300-rt2x00-Move-Move-pci_dev-specific-access-to-rt2x00p.patch
@@ -0,0 +1,150 @@
+From 313314263fda19db8eed94a7d7259b595634212e Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Sat, 14 Mar 2009 20:02:51 +0100
+Subject: [PATCH] rt2x00: Move Move pci_dev specific access to rt2x00pci
+
+pci_dev->irq and pci_name(pci_dev) access should be limited
+to rt2x00pci only. This is more generic and allows a rt2x00 pci
+driver to be controlled as PCI device but also as platform driver
+(needed for rt2800pci SoC support).
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2400pci.c | 2 +-
+ drivers/net/wireless/rt2x00/rt2500pci.c | 2 +-
+ drivers/net/wireless/rt2x00/rt2x00.h | 18 ++++++++++++++++++
+ drivers/net/wireless/rt2x00/rt2x00pci.c | 16 ++++++++++++----
+ drivers/net/wireless/rt2x00/rt61pci.c | 7 +------
+ 5 files changed, 33 insertions(+), 12 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2400pci.c
++++ b/drivers/net/wireless/rt2x00/rt2400pci.c
+@@ -1361,7 +1361,7 @@ static int rt2400pci_init_eeprom(struct
+ */
+ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
+ rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
+- rt2x00_set_chip(rt2x00dev, RT2460, value, reg);
++ rt2x00_set_chip_rf(rt2x00dev, value, reg);
+
+ if (!rt2x00_rf(&rt2x00dev->chip, RF2420) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF2421)) {
+--- a/drivers/net/wireless/rt2x00/rt2500pci.c
++++ b/drivers/net/wireless/rt2x00/rt2500pci.c
+@@ -1525,7 +1525,7 @@ static int rt2500pci_init_eeprom(struct
+ */
+ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
+ rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
+- rt2x00_set_chip(rt2x00dev, RT2560, value, reg);
++ rt2x00_set_chip_rf(rt2x00dev, value, reg);
+
+ if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
+--- a/drivers/net/wireless/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/rt2x00/rt2x00.h
+@@ -672,6 +672,12 @@ struct rt2x00_dev {
+ unsigned long flags;
+
+ /*
++ * Device information, Bus IRQ and name (PCI, SoC)
++ */
++ int irq;
++ const char *name;
++
++ /*
+ * Chipset identification.
+ */
+ struct rt2x00_chip chip;
+@@ -860,6 +866,18 @@ static inline void rt2x00_set_chip(struc
+ rt2x00dev->chip.rev = rev;
+ }
+
++static inline void rt2x00_set_chip_rt(struct rt2x00_dev *rt2x00dev,
++ const u16 rt)
++{
++ rt2x00dev->chip.rt = rt;
++}
++
++static inline void rt2x00_set_chip_rf(struct rt2x00_dev *rt2x00dev,
++ const u16 rf, const u32 rev)
++{
++ rt2x00_set_chip(rt2x00dev, rt2x00dev->chip.rt, rf, rev);
++}
++
+ static inline char rt2x00_rt(const struct rt2x00_chip *chipset, const u16 chip)
+ {
+ return (chipset->rt == chip);
+--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
++++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
+@@ -170,7 +170,6 @@ static void rt2x00pci_free_queue_dma(str
+
+ int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev)
+ {
+- struct pci_dev *pci_dev = to_pci_dev(rt2x00dev->dev);
+ struct data_queue *queue;
+ int status;
+
+@@ -186,11 +185,11 @@ int rt2x00pci_initialize(struct rt2x00_d
+ /*
+ * Register interrupt handler.
+ */
+- status = request_irq(pci_dev->irq, rt2x00dev->ops->lib->irq_handler,
+- IRQF_SHARED, pci_name(pci_dev), rt2x00dev);
++ status = request_irq(rt2x00dev->irq, rt2x00dev->ops->lib->irq_handler,
++ IRQF_SHARED, rt2x00dev->name, rt2x00dev);
+ if (status) {
+ ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n",
+- pci_dev->irq, status);
++ rt2x00dev->irq, status);
+ goto exit;
+ }
+
+@@ -270,6 +269,7 @@ int rt2x00pci_probe(struct pci_dev *pci_
+ struct ieee80211_hw *hw;
+ struct rt2x00_dev *rt2x00dev;
+ int retval;
++ u16 chip;
+
+ retval = pci_request_regions(pci_dev, pci_name(pci_dev));
+ if (retval) {
+@@ -307,6 +307,14 @@ int rt2x00pci_probe(struct pci_dev *pci_
+ rt2x00dev->dev = &pci_dev->dev;
+ rt2x00dev->ops = ops;
+ rt2x00dev->hw = hw;
++ rt2x00dev->irq = pci_dev->irq;
++ rt2x00dev->name = pci_name(pci_dev);
++
++ /*
++ * Determine RT chipset by reading PCI header.
++ */
++ pci_read_config_word(pci_dev, PCI_DEVICE_ID, &chip);
++ rt2x00_set_chip_rt(rt2x00dev, chip);
+
+ retval = rt2x00pci_alloc_reg(rt2x00dev);
+ if (retval)
+--- a/drivers/net/wireless/rt2x00/rt61pci.c
++++ b/drivers/net/wireless/rt2x00/rt61pci.c
+@@ -2308,7 +2308,6 @@ static int rt61pci_init_eeprom(struct rt
+ u32 reg;
+ u16 value;
+ u16 eeprom;
+- u16 device;
+
+ /*
+ * Read EEPROM word for configuration.
+@@ -2317,14 +2316,10 @@ static int rt61pci_init_eeprom(struct rt
+
+ /*
+ * Identify RF chipset.
+- * To determine the RT chip we have to read the
+- * PCI header of the device.
+ */
+- pci_read_config_word(to_pci_dev(rt2x00dev->dev),
+- PCI_CONFIG_HEADER_DEVICE, &device);
+ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
+ rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
+- rt2x00_set_chip(rt2x00dev, device, value, reg);
++ rt2x00_set_chip_rf(rt2x00dev, value, reg);
+
+ if (!rt2x00_rf(&rt2x00dev->chip, RF5225) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF5325) &&
diff --git a/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch b/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch
index 54361a9..6106789 100644
--- a/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch
+++ b/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch
@@ -1,6 +1,6 @@
-From 48eba0e802443d417a4b011202f956b9e5a74bfb Mon Sep 17 00:00:00 2001
+From 827327792c4b0d4d4909ec27bd56cb3ba8f2b754 Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Tue, 3 Mar 2009 19:14:51 +0100
+Date: Sat, 14 Mar 2009 20:06:48 +0100
Subject: [PATCH] rt2x00: Implement support for 802.11n
Extend rt2x00lib capabilities to support 802.11n,
diff --git a/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch b/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch
index cfb8a97..9cd2289 100644
--- a/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch
+++ b/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch
@@ -1,6 +1,6 @@
-From b11cae133872a0ff531a1d2646f1e46378510fe0 Mon Sep 17 00:00:00 2001
+From a34c288f7214637f214ec17fb2b35dd5d20b0634 Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Tue, 3 Mar 2009 19:18:56 +0100
+Date: Sat, 14 Mar 2009 20:41:58 +0100
Subject: [PATCH] rt2x00: Implement support for rt2800pci
Add support for the rt2800pci chipset.
@@ -15,10 +15,10 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/Kconfig | 15 +
drivers/net/wireless/rt2x00/Makefile | 1 +
- drivers/net/wireless/rt2x00/rt2800pci.c | 2831 +++++++++++++++++++++++++++++++
- drivers/net/wireless/rt2x00/rt2800pci.h | 1867 ++++++++++++++++++++
- drivers/net/wireless/rt2x00/rt2x00.h | 4 +
- 5 files changed, 4718 insertions(+), 0 deletions(-)
+ drivers/net/wireless/rt2x00/rt2800pci.c | 3035 +++++++++++++++++++++++++++++++
+ drivers/net/wireless/rt2x00/rt2800pci.h | 1880 +++++++++++++++++++
+ drivers/net/wireless/rt2x00/rt2x00.h | 6 +
+ 5 files changed, 4937 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.c
create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.h
@@ -33,7 +33,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
obj-$(CONFIG_RT73USB) += rt73usb.o
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
-@@ -0,0 +1,2831 @@
+@@ -0,0 +1,3035 @@
+/*
+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+ <http://rt2x00.serialmonkey.com>
@@ -67,12 +67,21 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
++#include <linux/platform_device.h>
+#include <linux/eeprom_93cx6.h>
+
+#include "rt2x00.h"
+#include "rt2x00pci.h"
+#include "rt2800pci.h"
+
++/* FIXME: Make Kconfig dependent */
++#ifdef CONFIG_PCI
++#define CONFIG_RT2800PCI_PCI
++#endif
++#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
++#define CONFIG_RT2800PCI_WISOC
++#endif
++
+/*
+ * Allow hardware encryption to be disabled.
+ */
@@ -208,6 +217,44 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
++static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token)
++{
++ unsigned int i;
++ u32 reg;
++
++ for (i = 0; i < 200; i++) {
++ rt2x00pci_register_read(rt2x00dev, H2M_MAILBOX_CID, &reg);
++
++ if ((rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD0) == token) ||
++ (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD1) == token) ||
++ (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD2) == token) ||
++ (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD3) == token))
++ break;
++
++ udelay(REGISTER_BUSY_DELAY);
++ }
++
++ if (i == 200)
++ ERROR(rt2x00dev, "MCU request failed, no response from hardware\n");
++
++ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
++ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
++}
++
++#ifdef CONFIG_RT2800PCI_WISOC
++static void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
++{
++ u32 *base_addr = (u32 *) KSEG1ADDR(0x1F040000); /* XXX for RT3052 */
++
++ memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE);
++}
++#else
++static inline void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
++{
++}
++#endif /* CONFIG_RT2800PCI_WISOC */
++
++#ifdef CONFIG_RT2800PCI_PCI
+static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
+{
+ struct rt2x00_dev *rt2x00dev = eeprom->data;
@@ -238,6 +285,32 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ rt2x00pci_register_write(rt2x00dev, E2PROM_CSR, reg);
+}
+
++static void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev)
++{
++ struct eeprom_93cx6 eeprom;
++ u32 reg;
++
++ rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, &reg);
++
++ eeprom.data = rt2x00dev;
++ eeprom.register_read = rt2800pci_eepromregister_read;
++ eeprom.register_write = rt2800pci_eepromregister_write;
++ eeprom.width = !rt2x00_get_field32(reg, E2PROM_CSR_TYPE) ?
++ PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
++ eeprom.reg_data_in = 0;
++ eeprom.reg_data_out = 0;
++ eeprom.reg_data_clock = 0;
++ eeprom.reg_chip_select = 0;
++
++ eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
++ EEPROM_SIZE / sizeof(u16));
++}
++#else
++static inline void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev)
++{
++}
++#endif /* CONFIG_RT2800PCI_PCI */
++
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+static const struct rt2x00debug rt2800pci_rt2x00debug = {
+ .owner = THIS_MODULE,
@@ -372,10 +445,11 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ rt2x00pci_register_read(rt2x00dev, offset, &reg);
+ rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
+ !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
-+ rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER, crypto->cipher);
++ rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
++ (crypto->cmd == SET_KEY) * crypto->cipher);
+ rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
+ (crypto->cmd == SET_KEY) * crypto->bssidx);
-+ rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, 0);
++ rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
+ rt2x00pci_register_write(rt2x00dev, offset, reg);
+
+ offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
@@ -429,10 +503,11 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ * Using the correct defines correctly will cause overhead,
+ * so just calculate the correct offset.
+ */
-+ field.bit_offset = (4 * key->keyidx) + (16 * (crypto->bssidx & 1));
++ field.bit_offset = 4 * (key->hw_key_idx % 8);
+ field.bit_mask = 0x7 << field.bit_offset;
+
-+ offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 2);
++ offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
++
+ rt2x00pci_register_read(rt2x00dev, offset, &reg);
+ rt2x00_set_field32(&reg, field,
+ (crypto->cmd == SET_KEY) * crypto->cipher);
@@ -456,9 +531,14 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ if (crypto->cmd == SET_KEY) {
+ /*
+ * 1 pairwise key is possible per AID, this means that the AID
-+ * equals our hw_key_idx.
++ * equals our hw_key_idx. Make sure the WCID starts _after_ the
++ * last possible shared key entry.
+ */
-+ key->hw_key_idx = crypto->aid;
++ if (crypto->aid > (256 - 32))
++ return -ENOSPC;
++
++ key->hw_key_idx = 32 + crypto->aid;
++
+
+ memcpy(key_entry.key, crypto->key,
+ sizeof(key_entry.key));
@@ -929,9 +1009,9 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 1);
+ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
+
-+ rt2800pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 0);
++ rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
+ } else {
-+ rt2800pci_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0);
++ rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
+
+ rt2x00pci_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
+ rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0);
@@ -1530,8 +1610,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ * BBP was enabled after firmware was loaded,
+ * but we need to reactivate it now.
+ */
-+ rt2x00pci_register_write(rt2x00dev, H2M_BBP_AGENT, 0x00000000);
-+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0x00000000);
++ rt2x00pci_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
++ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+ msleep(1);
+
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
@@ -1747,9 +1827,10 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+{
+ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
+
-+ if (state == STATE_AWAKE)
-+ rt2800pci_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0);
-+ else
++ if (state == STATE_AWAKE) {
++ rt2800pci_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0);
++ rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKUP);
++ } else
+ rt2800pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
+
+ return 0;
@@ -2016,7 +2097,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ * decryption. This prevents us from correct providing
+ * correct statistics through debugfs.
+ */
-+ rxdesc->cipher = CIPHER_NONE;
++ rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
+ rxdesc->cipher_status =
+ rt2x00_get_field32(rxd3, RXD_W3_CIPHER_ERROR);
+ }
@@ -2055,7 +2136,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ /*
+ * Mask of 0x8 bit to remove the short preamble flag.
+ */
-+ if (rxdesc->dev_flags == RATE_MODE_CCK)
++ if (rxdesc->rate_mode == RATE_MODE_CCK)
+ rxdesc->signal &= ~0x8;
+
+ rxdesc->rssi =
@@ -2071,7 +2152,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ /*
+ * Remove TXWI descriptor from start of buffer.
+ */
-+ skb_pull(entry->skb, TXWI_DESC_SIZE);
++ skb_pull(entry->skb, RXWI_DESC_SIZE);
+ skb_trim(entry->skb, rxdesc->size);
+}
+
@@ -2195,26 +2276,22 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ */
+static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
+{
-+ struct eeprom_93cx6 eeprom;
-+ u32 reg;
+ u16 word;
+ u8 *mac;
+ u8 default_lna_gain;
+
-+ rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, &reg);
-+
-+ eeprom.data = rt2x00dev;
-+ eeprom.register_read = rt2800pci_eepromregister_read;
-+ eeprom.register_write = rt2800pci_eepromregister_write;
-+ eeprom.width = !rt2x00_get_field32(reg, E2PROM_CSR_TYPE) ?
-+ PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
-+ eeprom.reg_data_in = 0;
-+ eeprom.reg_data_out = 0;
-+ eeprom.reg_data_clock = 0;
-+ eeprom.reg_chip_select = 0;
-+
-+ eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
-+ EEPROM_SIZE / sizeof(u16));
++ /*
++ * Read EEPROM into buffer
++ */
++ switch(rt2x00dev->chip.rt) {
++ case RT2880:
++ case RT3052:
++ rt2800pci_read_eeprom_soc(rt2x00dev);
++ break;
++ default:
++ rt2800pci_read_eeprom_pci(rt2x00dev);
++ break;
++ }
+
+ /*
+ * Start validation of the data that has been read.
@@ -2320,7 +2397,6 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ u32 reg;
+ u16 value;
+ u16 eeprom;
-+ u16 device;
+
+ /*
+ * Read EEPROM word for configuration.
@@ -2329,21 +2405,18 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+
+ /*
+ * Identify RF chipset.
-+ * To determine the RT chip we have to read the
-+ * PCI header of the device.
+ */
-+ pci_read_config_word(to_pci_dev(rt2x00dev->dev),
-+ PCI_CONFIG_HEADER_DEVICE, &device);
+ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
+ rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
-+ rt2x00_set_chip(rt2x00dev, device, value, reg);
++ rt2x00_set_chip_rf(rt2x00dev, value, reg);
+
+ if (!rt2x00_rf(&rt2x00dev->chip, RF2820) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF2850) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF2720) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF2020)) {
++ !rt2x00_rf(&rt2x00dev->chip, RF2020) &&
++ !rt2x00_rf(&rt2x00dev->chip, RF3052)) {
+ ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
+ return -ENODEV;
+ }
@@ -2490,7 +2563,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
+
+ if (rt2x00_rf(&rt2x00dev->chip, RF2820) ||
-+ rt2x00_rf(&rt2x00dev->chip, RF2720)) {
++ rt2x00_rf(&rt2x00dev->chip, RF2720) ||
++ rt2x00_rf(&rt2x00dev->chip, RF3052)) {
+ spec->num_channels = 14;
+ spec->channels = rf_vals;
+ } else if (rt2x00_rf(&rt2x00dev->chip, RF2850) ||
@@ -2824,6 +2898,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+/*
+ * RT2800pci module information.
+ */
++#ifdef CONFIG_RT2800PCI_PCI
+static struct pci_device_id rt2800pci_device_table[] = {
+ { PCI_DEVICE(0x1814, 0x0601), PCI_DEVICE_DATA(&rt2800pci_ops) },
+ { PCI_DEVICE(0x1814, 0x0681), PCI_DEVICE_DATA(&rt2800pci_ops) },
@@ -2835,15 +2910,130 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ { PCI_DEVICE(0x1a3b, 0x1059), PCI_DEVICE_DATA(&rt2800pci_ops) },
+ { 0, }
+};
++MODULE_DEVICE_TABLE(pci, rt2800pci_device_table);
++#endif /* CONFIG_RT2800PCI_PCI */
+
+MODULE_AUTHOR(DRV_PROJECT);
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("Ralink RT2800 PCI & PCMCIA Wireless LAN driver.");
+MODULE_SUPPORTED_DEVICE("Ralink RT2860 PCI & PCMCIA chipset based cards");
-+MODULE_DEVICE_TABLE(pci, rt2800pci_device_table);
+MODULE_FIRMWARE(FIRMWARE_RT2860);
+MODULE_LICENSE("GPL");
+
++#ifdef CONFIG_RT2800PCI_WISOC
++
++#ifdef CONFIG_RALINK_RT288X
++#define WSOC_RT_CHIPSET RT2880
++#endif /* CONFIG_RALINK_RT288X */
++
++#ifdef CONFIG_RALINK_RT305X
++#define WSOC_RT_CHIPSET RT3052
++#endif /* CONFIG_RALINK_RT305X */
++
++static void rt2800soc_free_reg(struct rt2x00_dev *rt2x00dev)
++{
++ kfree(rt2x00dev->rf);
++ rt2x00dev->rf = NULL;
++
++ kfree(rt2x00dev->eeprom);
++ rt2x00dev->eeprom = NULL;
++}
++
++static int rt2800soc_alloc_reg(struct rt2x00_dev *rt2x00dev)
++{
++ struct platform_device *pdev = to_platform_device(rt2x00dev->dev);
++ struct resource *res;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res) {
++ ERROR_PROBE("Failed to get MMIO resource\n");
++ return -ENODEV;
++ }
++
++ rt2x00dev->csr.base = (void __iomem *) KSEG1ADDR(res->start);
++ rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL);
++ if (!rt2x00dev->eeprom)
++ goto exit;
++
++ rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL);
++ if (!rt2x00dev->rf)
++ goto exit;
++
++ return 0;
++
++exit:
++ ERROR_PROBE("Failed to allocate registers.\n");
++ rt2800soc_free_reg(rt2x00dev);
++
++ return -ENOMEM;
++}
++
++static int rt2800soc_probe(struct platform_device *pdev)
++{
++ const struct rt2x00_ops *ops = &rt2800pci_ops;
++ struct ieee80211_hw *hw;
++ struct rt2x00_dev *rt2x00dev;
++ int retval;
++
++ hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw);
++ if (!hw) {
++ ERROR_PROBE("Failed to allocate hardware.\n");
++ return -ENOMEM;
++ }
++
++ platform_set_drvdata(pdev, hw);
++
++ rt2x00dev = hw->priv;
++ rt2x00dev->dev = &pdev->dev;
++ rt2x00dev->ops = ops;
++ rt2x00dev->hw = hw;
++ rt2x00dev->irq = platform_get_irq(pdev, 0);
++ rt2x00dev->name = pdev->dev.driver->name;
++
++ rt2x00_set_chip_rt(rt2x00dev, WSOC_RT_CHIPSET);
++
++ retval = rt2800soc_alloc_reg(rt2x00dev);
++ if (retval)
++ goto exit_free_device;
++
++ retval = rt2x00lib_probe_dev(rt2x00dev);
++ if (retval)
++ goto exit_free_reg;
++
++ return 0;
++
++exit_free_reg:
++ rt2800soc_free_reg(rt2x00dev);
++
++exit_free_device:
++ ieee80211_free_hw(hw);
++
++ return retval;
++}
++
++static int rt2800soc_remove(struct platform_device *pdev)
++{
++ struct ieee80211_hw *hw = platform_get_drvdata(pdev);
++ struct rt2x00_dev *rt2x00dev = hw->priv;
++
++ /*
++ * Free all allocated data.
++ */
++ rt2x00lib_remove_dev(rt2x00dev);
++ rt2800soc_free_reg(rt2x00dev);
++ ieee80211_free_hw(hw);
++
++ return 0;
++}
++
++static struct platform_driver rt2800soc_driver = {
++ .driver.name = "rt2800_wmac",
++ .probe = rt2800soc_probe,
++ .remove = rt2800soc_remove,
++};
++#endif /* CONFIG_RT2800PCI_WISOC */
++
++#ifdef CONFIG_RT2800PCI_PCI
+static struct pci_driver rt2800pci_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = rt2800pci_device_table,
@@ -2852,22 +3042,36 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ .suspend = rt2x00pci_suspend,
+ .resume = rt2x00pci_resume,
+};
++#endif /* CONFIG_RT2800PCI_PCI */
+
+static int __init rt2800pci_init(void)
+{
-+ return pci_register_driver(&rt2800pci_driver);
++ int ret = 0;
++
++#ifdef CONFIG_RT2800PCI_WISOC
++ ret = platform_driver_register(&rt2800soc_driver);
++#endif
++#ifdef CONFIG_RT2800PCI_PCI
++ ret = pci_register_driver(&rt2800pci_driver);
++#endif
++ return ret;
+}
+
+static void __exit rt2800pci_exit(void)
+{
++#ifdef CONFIG_RT2800PCI_PCI
+ pci_unregister_driver(&rt2800pci_driver);
++#endif
++#ifdef CONFIG_RT2800PCI_WISOC
++ platform_driver_unregister(&rt2800soc_driver);
++#endif
+}
+
+module_init(rt2800pci_init);
+module_exit(rt2800pci_exit);
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800pci.h
-@@ -0,0 +1,1867 @@
+@@ -0,0 +1,1880 @@
+/*
+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+ <http://rt2x00.serialmonkey.com>
@@ -2906,6 +3110,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ * RF2750 2.4G/5G 1T2R
+ * RF3020 2.4G 1T1R
+ * RF2020 2.4G B/G
++ * RF3052 2.4G 2T2R
+ */
+#define RF2820 0x0001
+#define RF2850 0x0002
@@ -2913,6 +3118,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+#define RF2750 0x0004
+#define RF3020 0x0005
+#define RF2020 0x0006
++#define RF3052 0x0008
+
+/*
+ * RT2860 version
@@ -4233,6 +4439,10 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ * H2M_MAILBOX_CID:
+ */
+#define H2M_MAILBOX_CID 0x7014
++#define H2M_MAILBOX_CID_CMD0 FIELD32(0x000000ff)
++#define H2M_MAILBOX_CID_CMD1 FIELD32(0x0000ff00)
++#define H2M_MAILBOX_CID_CMD2 FIELD32(0x00ff0000)
++#define H2M_MAILBOX_CID_CMD3 FIELD32(0xff000000)
+
+/*
+ * H2M_MAILBOX_STATUS:
@@ -4530,6 +4740,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ */
+#define MCU_SLEEP 0x30
+#define MCU_WAKEUP 0x31
++#define MCU_RADIO_OFF 0x35
+#define MCU_LED 0x50
+#define MCU_LED_STRENGTH 0x51
+#define MCU_LED_1 0x52
@@ -4537,6 +4748,12 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+#define MCU_LED_3 0x54
+#define MCU_RADAR 0x60
+#define MCU_BOOT_SIGNAL 0x72
++#define MCU_BBP_SIGNAL 0x80
++
++/*
++ * MCU mailbox tokens
++ */
++#define TOKEN_WAKUP 3
+
+/*
+ * DMA descriptor defines.
@@ -4737,7 +4954,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+#endif /* RT2800PCI_H */
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
-@@ -138,6 +138,10 @@ struct rt2x00_chip {
+@@ -138,6 +138,12 @@ struct rt2x00_chip {
#define RT2561 0x0302
#define RT2661 0x0401
#define RT2571 0x1300
@@ -4745,6 +4962,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+#define RT2860D 0x0681 /* 2.4GHz, 5GHz PCI/CB */
+#define RT2890 0x0701 /* 2.4GHz PCIe */
+#define RT2890D 0x0781 /* 2.4GHz, 5GHz PCIe */
++#define RT2880 0x2880 /* WSOC */
++#define RT3052 0x3052 /* WSOC */
u16 rf;
u32 rev;
diff --git a/package/mac80211/patches/303-rt2x00-Implement-support-for-rt2800usb.patch b/package/mac80211/patches/303-rt2x00-Implement-support-for-rt2800usb.patch
index 7a25490..c9152fd 100644
--- a/package/mac80211/patches/303-rt2x00-Implement-support-for-rt2800usb.patch
+++ b/package/mac80211/patches/303-rt2x00-Implement-support-for-rt2800usb.patch
@@ -1,6 +1,6 @@
-From b249bc450f982cd2491448c91faf797ed37b69b8 Mon Sep 17 00:00:00 2001
+From 101b65d221593c1bdeacf0c6085d885ea5447c4c Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Tue, 3 Mar 2009 19:25:49 +0100
+Date: Sat, 14 Mar 2009 20:46:40 +0100
Subject: [PATCH] rt2x00: Implement support for rt2800usb
Add support for the rt2800usb chipset.
@@ -16,9 +16,9 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
drivers/net/wireless/rt2x00/Kconfig | 14 +
drivers/net/wireless/rt2x00/Makefile | 1 +
drivers/net/wireless/rt2x00/rt2800usb.c | 3032 +++++++++++++++++++++++++++++++
- drivers/net/wireless/rt2x00/rt2800usb.h | 1932 ++++++++++++++++++++
+ drivers/net/wireless/rt2x00/rt2800usb.h | 1934 ++++++++++++++++++++
drivers/net/wireless/rt2x00/rt2x00.h | 7 +
- 5 files changed, 4986 insertions(+), 0 deletions(-)
+ 5 files changed, 4988 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wireless/rt2x00/rt2800usb.c
create mode 100644 drivers/net/wireless/rt2x00/rt2800usb.h
@@ -397,10 +397,11 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ rt2x00usb_register_read(rt2x00dev, offset, &reg);
+ rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
+ !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
-+ rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER, crypto->cipher);
++ rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
++ (crypto->cmd == SET_KEY) * crypto->cipher);
+ rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
+ (crypto->cmd == SET_KEY) * crypto->bssidx);
-+ rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, 0);
++ rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
+ rt2x00usb_register_write(rt2x00dev, offset, reg);
+
+ offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
@@ -459,10 +460,10 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ * Using the correct defines correctly will cause overhead,
+ * so just calculate the correct offset.
+ */
-+ field.bit_offset = (4 * key->keyidx) + (16 * (crypto->bssidx & 1));
++ field.bit_offset = 4 * (key->hw_key_idx % 8);
+ field.bit_mask = 0x7 << field.bit_offset;
+
-+ offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 2);
++ offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
+
+ rt2x00usb_register_read(rt2x00dev, offset, &reg);
+ rt2x00_set_field32(&reg, field,
@@ -488,9 +489,13 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ if (crypto->cmd == SET_KEY) {
+ /*
+ * 1 pairwise key is possible per AID, this means that the AID
-+ * equals our hw_key_idx.
++ * equals our hw_key_idx. Make sure the WCID starts _after_ the
++ * last possible shared key entry.
+ */
-+ key->hw_key_idx = crypto->aid;
++ if (crypto->aid > (256 - 32))
++ return -ENOSPC;
++
++ key->hw_key_idx = 32 + crypto->aid;
+
+ memcpy(key_entry.key, crypto->key,
+ sizeof(key_entry.key));
@@ -2183,12 +2188,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
+
+ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
-+ /*
-+ * Unfortunately we don't know the cipher type used during
-+ * decryption. This prevents us from correct providing
-+ * correct statistics through debugfs.
-+ */
-+ rxdesc->cipher = CIPHER_NONE;
++ rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
+ rxdesc->cipher_status =
+ rt2x00_get_field32(rxd0, RXD_W0_CIPHER_ERROR);
+ }
@@ -2227,7 +2227,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ /*
+ * Mask of 0x8 bit to remove the short preamble flag.
+ */
-+ if (rxdesc->dev_flags == RATE_MODE_CCK)
++ if (rxdesc->rate_mode == RATE_MODE_CCK)
+ rxdesc->signal &= ~0x8;
+
+ rxdesc->rssi =
@@ -3066,7 +3066,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+module_exit(rt2800usb_exit);
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800usb.h
-@@ -0,0 +1,1932 @@
+@@ -0,0 +1,1934 @@
+/*
+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+ <http://rt2x00.serialmonkey.com>
@@ -4783,6 +4783,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ */
+#define MCU_SLEEP 0x30
+#define MCU_WAKEUP 0x31
++#define MCU_RADIO_OFF 0x35
+#define MCU_LED 0x50
+#define MCU_LED_STRENGTH 0x51
+#define MCU_LED_1 0x52
@@ -4790,6 +4791,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+#define MCU_LED_3 0x54
+#define MCU_RADAR 0x60
+#define MCU_BOOT_SIGNAL 0x72
++#define MCU_BBP_SIGNAL 0x80
+
+/*
+ * DMA descriptor defines.
@@ -5001,15 +5003,15 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+#endif /* RT2800USB_H */
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
-@@ -142,6 +142,7 @@ struct rt2x00_chip {
- #define RT2860D 0x0681 /* 2.4GHz, 5GHz PCI/CB */
- #define RT2890 0x0701 /* 2.4GHz PCIe */
+@@ -144,6 +144,7 @@ struct rt2x00_chip {
#define RT2890D 0x0781 /* 2.4GHz, 5GHz PCIe */
+ #define RT2880 0x2880 /* WSOC */
+ #define RT3052 0x3052 /* WSOC */
+#define RT2870 0x1600
u16 rf;
u32 rev;
-@@ -780,6 +781,12 @@ struct rt2x00_dev {
+@@ -788,6 +789,12 @@ struct rt2x00_dev {
u8 freq_offset;
/*
diff --git a/package/mac80211/patches/304-rt2x00-Detect-cypher-type-during-RX-rt2800pci.patch b/package/mac80211/patches/304-rt2x00-Detect-cypher-type-during-RX-rt2800pci.patch
deleted file mode 100644
index 898a209..0000000
--- a/package/mac80211/patches/304-rt2x00-Detect-cypher-type-during-RX-rt2800pci.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From f23c3d3175e55ebac81d6e29f1c1415491a78d60 Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Tue, 3 Mar 2009 20:12:44 +0100
-Subject: [PATCH] rt2x00: Detect cypher type during RX (rt2800pci)
-
-Use UDF field in WCID entry to pass the cipher type
-to the RXWI fields. This will allow keeping track of
-the number of frames received with a particular cipher type
-which is exported through debugfs.
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2800pci.c | 4 ++--
- 1 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2800pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
-@@ -339,7 +339,7 @@ static void rt2800pci_config_wcid_attr(s
- rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER, crypto->cipher);
- rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
- (crypto->cmd == SET_KEY) * crypto->bssidx);
-- rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, 0);
-+ rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
- rt2x00pci_register_write(rt2x00dev, offset, reg);
-
- offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
-@@ -1980,7 +1980,7 @@ static void rt2800pci_fill_rxdone(struct
- * decryption. This prevents us from correct providing
- * correct statistics through debugfs.
- */
-- rxdesc->cipher = CIPHER_NONE;
-+ rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
- rxdesc->cipher_status =
- rt2x00_get_field32(rxd3, RXD_W3_CIPHER_ERROR);
- }
diff --git a/package/mac80211/patches/304-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch b/package/mac80211/patches/304-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch
new file mode 100644
index 0000000..2bd4eb2
--- /dev/null
+++ b/package/mac80211/patches/304-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch
@@ -0,0 +1,25 @@
+From 6bdf6a86854bdeab9557f0ce25c3f5401c18f629 Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Sat, 14 Mar 2009 20:57:27 +0100
+Subject: [PATCH] rt2x00: rt2x00: Move Move pci_dev specific access to rt2x00pci - part 2
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt61pci.h | 6 ------
+ 1 files changed, 0 insertions(+), 6 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt61pci.h
++++ b/drivers/net/wireless/rt2x00/rt61pci.h
+@@ -63,12 +63,6 @@
+ */
+
+ /*
+- * PCI Configuration Header
+- */
+-#define PCI_CONFIG_HEADER_VENDOR 0x0000
+-#define PCI_CONFIG_HEADER_DEVICE 0x0002
+-
+-/*
+ * HOST_CMD_CSR: For HOST to interrupt embedded processor
+ */
+ #define HOST_CMD_CSR 0x0008
diff --git a/package/mac80211/patches/305-rt2x00-Detect-cypher-type-during-RX-rt2800usb.patch b/package/mac80211/patches/305-rt2x00-Detect-cypher-type-during-RX-rt2800usb.patch
deleted file mode 100644
index 831dda0..0000000
--- a/package/mac80211/patches/305-rt2x00-Detect-cypher-type-during-RX-rt2800usb.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 35c7358f5f7ba03daeecdf1fdceabd48ebcd029a Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Tue, 3 Mar 2009 20:15:17 +0100
-Subject: [PATCH] rt2x00: Detect cypher type during RX (rt2800usb)
-
-Use UDF field in WCID entry to pass the cipher type
-to the RXWI fields. This will allow keeping track of
-the number of frames received with a particular cipher type
-which is exported through debugfs.
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2800usb.c | 9 ++-------
- 1 files changed, 2 insertions(+), 7 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2800usb.c
-+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
-@@ -366,7 +366,7 @@ static void rt2800usb_config_wcid_attr(s
- rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER, crypto->cipher);
- rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
- (crypto->cmd == SET_KEY) * crypto->bssidx);
-- rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, 0);
-+ rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
- rt2x00usb_register_write(rt2x00dev, offset, reg);
-
- offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
-@@ -2149,12 +2149,7 @@ static void rt2800usb_fill_rxdone(struct
- rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
-
- if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
-- /*
-- * Unfortunately we don't know the cipher type used during
-- * decryption. This prevents us from correct providing
-- * correct statistics through debugfs.
-- */
-- rxdesc->cipher = CIPHER_NONE;
-+ rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
- rxdesc->cipher_status =
- rt2x00_get_field32(rxd0, RXD_W0_CIPHER_ERROR);
- }
diff --git a/package/mac80211/patches/305-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch b/package/mac80211/patches/305-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch
new file mode 100644
index 0000000..783a6d6
--- /dev/null
+++ b/package/mac80211/patches/305-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch
@@ -0,0 +1,25 @@
+From a3334c89fbed644bb12ee27e2d9c1dc70b1512ab Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Sat, 14 Mar 2009 20:58:12 +0100
+Subject: [PATCH] rt2x00: rt2x00: Move Move pci_dev specific access to rt2x00pci - part 2 (rt2800pci)
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2800pci.h | 6 ------
+ 1 files changed, 0 insertions(+), 6 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800pci.h
++++ b/drivers/net/wireless/rt2x00/rt2800pci.h
+@@ -83,12 +83,6 @@
+ */
+
+ /*
+- * PCI Configuration Header
+- */
+-#define PCI_CONFIG_HEADER_VENDOR 0x0000
+-#define PCI_CONFIG_HEADER_DEVICE 0x0002
+-
+-/*
+ * E2PROM_CSR: EEPROM control register.
+ * RELOAD: Write 1 to reload eeprom content.
+ * TYPE: 0: 93c46, 1:93c66.
diff --git a/package/mac80211/patches/306-rt2x00-Fix-HW-crypto-offset-calculation-rt2800pci.patch b/package/mac80211/patches/306-rt2x00-Fix-HW-crypto-offset-calculation-rt2800pci.patch
deleted file mode 100644
index 1fbef6c..0000000
--- a/package/mac80211/patches/306-rt2x00-Fix-HW-crypto-offset-calculation-rt2800pci.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From e63585e28192e854707c549547645c669e6daa2a Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Wed, 4 Mar 2009 20:25:43 +0100
-Subject: [PATCH] rt2x00: Fix HW crypto offset calculation (rt2800pci)
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2800pci.c | 8 +++++---
- 1 files changed, 5 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2800pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
-@@ -336,7 +336,8 @@ static void rt2800pci_config_wcid_attr(s
- rt2x00pci_register_read(rt2x00dev, offset, &reg);
- rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
- !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
-- rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER, crypto->cipher);
-+ rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
-+ (crypto->cmd == SET_KEY) * crypto->cipher);
- rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
- (crypto->cmd == SET_KEY) * crypto->bssidx);
- rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
-@@ -393,10 +394,11 @@ static int rt2800pci_config_shared_key(s
- * Using the correct defines correctly will cause overhead,
- * so just calculate the correct offset.
- */
-- field.bit_offset = (4 * key->keyidx) + (16 * (crypto->bssidx & 1));
-+ field.bit_offset = 4 * (key->hw_key_idx % 8);
- field.bit_mask = 0x7 << field.bit_offset;
-
-- offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 2);
-+ offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
-+
- rt2x00pci_register_read(rt2x00dev, offset, &reg);
- rt2x00_set_field32(&reg, field,
- (crypto->cmd == SET_KEY) * crypto->cipher);
diff --git a/package/mac80211/patches/306-rt2x00-Fix-module-loading-in-case-of-error-rt2800p.patch b/package/mac80211/patches/306-rt2x00-Fix-module-loading-in-case-of-error-rt2800p.patch
new file mode 100644
index 0000000..4f83293
--- /dev/null
+++ b/package/mac80211/patches/306-rt2x00-Fix-module-loading-in-case-of-error-rt2800p.patch
@@ -0,0 +1,32 @@
+From 14f870b27b836acee5f04809287175016ca16b05 Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Sun, 15 Mar 2009 15:13:58 +0100
+Subject: [PATCH] rt2x00: Fix module loading in case of error (rt2800pci)
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2800pci.c | 9 +++++++++
+ 1 files changed, 9 insertions(+), 0 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800pci.c
++++ b/drivers/net/wireless/rt2x00/rt2800pci.c
+@@ -3014,10 +3014,19 @@ static int __init rt2800pci_init(void)
+
+ #ifdef CONFIG_RT2800PCI_WISOC
+ ret = platform_driver_register(&rt2800soc_driver);
++ if (ret)
++ return ret;
+ #endif
+ #ifdef CONFIG_RT2800PCI_PCI
+ ret = pci_register_driver(&rt2800pci_driver);
++ if (ret) {
++#ifdef CONFIG_RT2800PCI_WISOC
++ platform_driver_unregister(&rt2800soc_driver);
++#endif
++ return ret;
++ }
+ #endif
++
+ return ret;
+ }
+
diff --git a/package/mac80211/patches/307-rt2x00-Add-PM-support-for-SoC-rt2800pci.patch b/package/mac80211/patches/307-rt2x00-Add-PM-support-for-SoC-rt2800pci.patch
new file mode 100644
index 0000000..d08e5fe
--- /dev/null
+++ b/package/mac80211/patches/307-rt2x00-Add-PM-support-for-SoC-rt2800pci.patch
@@ -0,0 +1,80 @@
+From aef81259a944186a120d51e4462a5f974de99fb8 Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Sun, 15 Mar 2009 15:37:29 +0100
+Subject: [PATCH] rt2x00: Add PM support for SoC (rt2800pci)
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2800pci.c | 52 +++++++++++++++++++++++++++++--
+ 1 files changed, 49 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800pci.c
++++ b/drivers/net/wireless/rt2x00/rt2800pci.c
+@@ -2934,7 +2934,7 @@ exit:
+
+ static int rt2800soc_probe(struct platform_device *pdev)
+ {
+- const struct rt2x00_ops *ops = &rt2800pci_ops;
++ struct rt2x00_ops *ops = (struct rt2x00_ops *)pdev->driver->p;
+ struct ieee80211_hw *hw;
+ struct rt2x00_dev *rt2x00dev;
+ int retval;
+@@ -2990,10 +2990,56 @@ static int rt2800soc_remove(struct platf
+ return 0;
+ }
+
++#ifdef CONFIG_PM
++int rt2x00soc_suspend(struct device *dev, pm_message_t state)
++{
++ struct ieee80211_hw *hw = dev_get_drvdata(dev);
++ struct rt2x00_dev *rt2x00dev = hw->priv;
++ int retval;
++
++ retval = rt2x00lib_suspend(rt2x00dev, state);
++ if (retval)
++ return retval;
++
++ rt2800soc_free_reg(rt2x00dev);
++
++ return 0;
++}
++
++int rt2x00soc_resume(struct device *dev)
++{
++ struct ieee80211_hw *hw = dev_get_drvdata(dev);
++ struct rt2x00_dev *rt2x00dev = hw->priv;
++ int retval;
++
++ retval = rt2x00soc_alloc_reg(rt2x00dev);
++ if (retval)
++ return retval;
++
++ retval = rt2x00lib_resume(rt2x00dev);
++ if (retval)
++ goto exit_free_reg;
++
++ return 0;
++
++exit_free_reg:
++ rt2x00pci_free_reg(rt2x00dev);
++
++ return retval;
++}
++#endif /* CONFIG_PM */
++
+ static struct platform_driver rt2800soc_driver = {
+- .driver.name = "rt2800_wmac",
++ .driver = {
++ .name = "rt2800_wmac",
++ .owner = THIS_MODULE,
++ .mod_name = KBUILD_MODNAME,
++ .p = &rt2800pci_ops;
++ }
+ .probe = rt2800soc_probe,
+- .remove = rt2800soc_remove,
++ .remove = __devexit_p(rt2800soc_remove),
++ .suspend = rt2x00soc_suspend,
++ .resume = rt2x00soc_resume,
+ };
+ #endif /* CONFIG_RT2800PCI_WISOC */
+
diff --git a/package/mac80211/patches/307-rt2x00-Fix-HW-crypto-offset-calculation-rt2800usb.patch b/package/mac80211/patches/307-rt2x00-Fix-HW-crypto-offset-calculation-rt2800usb.patch
deleted file mode 100644
index 11a915e..0000000
--- a/package/mac80211/patches/307-rt2x00-Fix-HW-crypto-offset-calculation-rt2800usb.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From d6368d8b77bb8568aa0c92adf1e507fb4198ff41 Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Wed, 4 Mar 2009 20:26:27 +0100
-Subject: [PATCH] rt2x00: Fix HW crypto offset calculation (rt2800usb)
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2800usb.c | 7 ++++---
- 1 files changed, 4 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2800usb.c
-+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
-@@ -363,7 +363,8 @@ static void rt2800usb_config_wcid_attr(s
- rt2x00usb_register_read(rt2x00dev, offset, &reg);
- rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
- !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
-- rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER, crypto->cipher);
-+ rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
-+ (crypto->cmd == SET_KEY) * crypto->cipher);
- rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
- (crypto->cmd == SET_KEY) * crypto->bssidx);
- rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
-@@ -425,10 +426,10 @@ static int rt2800usb_config_shared_key(s
- * Using the correct defines correctly will cause overhead,
- * so just calculate the correct offset.
- */
-- field.bit_offset = (4 * key->keyidx) + (16 * (crypto->bssidx & 1));
-+ field.bit_offset = 4 * (key->hw_key_idx % 8);
- field.bit_mask = 0x7 << field.bit_offset;
-
-- offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 2);
-+ offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
-
- rt2x00usb_register_read(rt2x00dev, offset, &reg);
- rt2x00_set_field32(&reg, field,
diff --git a/package/mac80211/patches/308-rt2x00-DMA-fixes-new-chipset-support-rt2800pci.patch b/package/mac80211/patches/308-rt2x00-DMA-fixes-new-chipset-support-rt2800pci.patch
new file mode 100644
index 0000000..3bb5c2e
--- /dev/null
+++ b/package/mac80211/patches/308-rt2x00-DMA-fixes-new-chipset-support-rt2800pci.patch
@@ -0,0 +1,535 @@
+From bfa282e0f525b074ec9a21372ab906156ce0aa20 Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Mon, 16 Mar 2009 20:16:59 +0100
+Subject: [PATCH] rt2x00: DMA fixes & new chipset support (rt2800pci)
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2800pci.c | 320 +++++++++++++++++++++++++++++--
+ drivers/net/wireless/rt2x00/rt2800pci.h | 57 ++++++-
+ 2 files changed, 361 insertions(+), 16 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800pci.c
++++ b/drivers/net/wireless/rt2x00/rt2800pci.c
+@@ -66,6 +66,8 @@ MODULE_PARM_DESC(nohwcrypt, "Disable har
+ */
+ #define WAIT_FOR_BBP(__dev, __reg) \
+ rt2x00pci_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
++#define WAIT_FOR_RFCSR(__dev, __reg) \
++ rt2x00pci_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
+ #define WAIT_FOR_RF(__dev, __reg) \
+ rt2x00pci_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
+ #define WAIT_FOR_MCU(__dev, __reg) \
+@@ -129,6 +131,61 @@ static void rt2800pci_bbp_read(struct rt
+ mutex_unlock(&rt2x00dev->csr_mutex);
+ }
+
++static void rt2800pci_rfcsr_write(struct rt2x00_dev *rt2x00dev,
++ const unsigned int word, const u8 value)
++{
++ u32 reg;
++
++ mutex_lock(&rt2x00dev->csr_mutex);
++
++ /*
++ * Wait until the RFCSR becomes available, afterwards we
++ * can safely write the new data into the register.
++ */
++ if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
++ reg = 0;
++ rt2x00_set_field32(&reg, RF_CSR_CFG_DATA, value);
++ rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
++ rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 1);
++ rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
++
++ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg);
++ }
++
++ mutex_unlock(&rt2x00dev->csr_mutex);
++}
++
++static void rt2800pci_rfcsr_read(struct rt2x00_dev *rt2x00dev,
++ const unsigned int word, u8 *value)
++{
++ u32 reg;
++
++ mutex_lock(&rt2x00dev->csr_mutex);
++
++ /*
++ * Wait until the RFCSR becomes available, afterwards we
++ * can safely write the read request into the register.
++ * After the data has been written, we wait until hardware
++ * returns the correct value, if at any time the register
++ * doesn't become available in time, reg will be 0xffffffff
++ * which means we return 0xff to the caller.
++ */
++ if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
++ reg = 0;
++ rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
++ rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 0);
++ rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
++
++ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg);
++
++ WAIT_FOR_RFCSR(rt2x00dev, &reg);
++ }
++
++ *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
++
++ mutex_unlock(&rt2x00dev->csr_mutex);
++}
++
+ static void rt2800pci_rf_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, const u32 value)
+ {
+@@ -160,6 +217,13 @@ static void rt2800pci_mcu_request(struct
+ {
+ u32 reg;
+
++ /*
++ * RT2880 and RT3052 don't support MCU requests.
++ */
++ if (rt2x00_rt(&rt2x00dev->chip, RT2880) ||
++ rt2x00_rt(&rt2x00dev->chip, RT3052))
++ return;
++
+ mutex_lock(&rt2x00dev->csr_mutex);
+
+ /*
+@@ -729,13 +793,11 @@ static void rt2800pci_config_lna_gain(st
+ rt2x00dev->lna_gain = lna_gain;
+ }
+
+-static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev,
+- struct ieee80211_conf *conf,
+- struct rf_channel *rf,
+- struct channel_info *info)
++static void rt2800pci_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
++ struct ieee80211_conf *conf,
++ struct rf_channel *rf,
++ struct channel_info *info)
+ {
+- u32 reg;
+- unsigned int tx_pin;
+ u16 eeprom;
+
+ rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
+@@ -745,9 +807,8 @@ static void rt2800pci_config_channel(str
+ */
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
+
+- if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) {
++ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1)
+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
+- }
+
+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) {
+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
+@@ -806,6 +867,62 @@ static void rt2800pci_config_channel(str
+ rt2800pci_rf_write(rt2x00dev, 2, rf->rf2);
+ rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
+ rt2800pci_rf_write(rt2x00dev, 4, rf->rf4);
++}
++
++static void rt2800pci_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
++ struct ieee80211_conf *conf,
++ struct rf_channel *rf,
++ struct channel_info *info)
++{
++ u8 rfcsr;
++
++ rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf1);
++ rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf3);
++
++ rt2800pci_rfcsr_read(rt2x00dev, 6, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
++ rt2800pci_rfcsr_write(rt2x00dev, 6, rfcsr);
++
++ rt2800pci_rfcsr_read(rt2x00dev, 12, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
++ TXPOWER_G_TO_DEV(info->tx_power1));
++ rt2800pci_rfcsr_write(rt2x00dev, 12, rfcsr);
++
++ rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
++ rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr);
++
++ if (conf_is_ht40(conf))
++ rt2800pci_rfcsr_write(rt2x00dev, 24,
++ rt2x00dev->calibration_bw40);
++ else
++ rt2800pci_rfcsr_write(rt2x00dev, 24,
++ rt2x00dev->calibration_bw20);
++
++ rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
++ rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr);
++}
++
++static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev,
++ struct ieee80211_conf *conf,
++ struct rf_channel *rf,
++ struct channel_info *info)
++{
++ u32 reg;
++ unsigned int tx_pin;
++ u16 eeprom;
++ u8 bbp;
++
++ /*
++ * Determine antenna settings from EEPROM
++ */
++ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
++
++ if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
++ rt2800pci_config_channel_rt2x(rt2x00dev, conf, rf, info);
++ else
++ rt2800pci_config_channel_rt3x(rt2x00dev, conf, rf, info);
+
+ /*
+ * Change BBP settings
+@@ -861,6 +978,26 @@ static void rt2800pci_config_channel(str
+
+ rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
+
++ rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
++ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
++ rt2800pci_bbp_write(rt2x00dev, 4, bbp);
++
++ rt2800pci_bbp_read(rt2x00dev, 3, &bbp);
++ rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
++ rt2800pci_bbp_write(rt2x00dev, 3, bbp);
++
++ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
++ if (conf_is_ht40(conf)) {
++ rt2800pci_bbp_write(rt2x00dev, 69, 0x1a);
++ rt2800pci_bbp_write(rt2x00dev, 70, 0x0a);
++ rt2800pci_bbp_write(rt2x00dev, 73, 0x16);
++ } else {
++ rt2800pci_bbp_write(rt2x00dev, 69, 0x16);
++ rt2800pci_bbp_write(rt2x00dev, 70, 0x08);
++ rt2800pci_bbp_write(rt2x00dev, 73, 0x11);
++ }
++ }
++
+ msleep(1);
+ }
+
+@@ -1265,7 +1402,7 @@ static int rt2800pci_init_queues(struct
+ entry_priv = rt2x00dev->rx->entries[0].priv_data;
+ rt2x00pci_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma);
+ rt2x00pci_register_write(rt2x00dev, RX_MAX_CNT, rt2x00dev->rx[0].limit);
+- rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, 0);
++ rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, rt2x00dev->rx[0].limit - 1);
+ rt2x00pci_register_write(rt2x00dev, RX_DRX_IDX, 0);
+
+ /*
+@@ -1613,7 +1750,7 @@ static int rt2800pci_init_bbp(struct rt2
+ rt2800pci_bbp_write(rt2x00dev, 91, 0x04);
+ rt2800pci_bbp_write(rt2x00dev, 92, 0x00);
+ rt2800pci_bbp_write(rt2x00dev, 103, 0x00);
+- rt2800pci_bbp_write(rt2x00dev, 105, 0x05);
++ rt2800pci_bbp_write(rt2x00dev, 105, 0x01);
+
+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+ rt2800pci_bbp_write(rt2x00dev, 69, 0x16);
+@@ -1623,6 +1760,12 @@ static int rt2800pci_init_bbp(struct rt2
+ if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION)
+ rt2800pci_bbp_write(rt2x00dev, 84, 0x19);
+
++ if (rt2x00_rt(&rt2x00dev->chip, RT3052)) {
++ rt2800pci_bbp_write(rt2x00dev, 31, 0x08);
++ rt2800pci_bbp_write(rt2x00dev, 78, 0x0e);
++ rt2800pci_bbp_write(rt2x00dev, 80, 0x08);
++ }
++
+ for (i = 0; i < EEPROM_BBP_SIZE; i++) {
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
+
+@@ -1636,6 +1779,144 @@ static int rt2800pci_init_bbp(struct rt2
+ return 0;
+ }
+
++static u8 rt2800pci_init_rx_filter(struct rt2x00_dev *rt2x00dev,
++ bool bw40, u8 rfcsr24, u8 filter_target)
++{
++ unsigned int i;
++ u8 bbp;
++ u8 rfcsr;
++ u8 passband;
++ u8 stopband;
++ u8 overtuned = 0;
++
++ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
++
++ rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
++ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
++ rt2800pci_bbp_write(rt2x00dev, 4, bbp);
++
++ rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
++ rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr);
++
++ /*
++ * Set power & frequency of passband test tone
++ */
++ rt2800pci_bbp_write(rt2x00dev, 24, 0);
++
++ for (i = 0; i < 100; i++) {
++ rt2800pci_bbp_write(rt2x00dev, 25, 0x90);
++ msleep(1);
++
++ rt2800pci_bbp_read(rt2x00dev, 55, &passband);
++ if (passband)
++ break;
++ }
++
++ /*
++ * Set power & frequency of stopband test tone
++ */
++ rt2800pci_bbp_write(rt2x00dev, 24, 0x06);
++
++ for (i = 0; i < 100; i++) {
++ rt2800pci_bbp_write(rt2x00dev, 25, 0x90);
++ msleep(1);
++
++ rt2800pci_bbp_read(rt2x00dev, 55, &stopband);
++
++ if ((passband - stopband) <= filter_target) {
++ rfcsr24++;
++ overtuned += ((passband - stopband) == filter_target);
++ } else
++ break;
++
++ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
++ }
++
++ rfcsr24 -= !!overtuned;
++
++ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
++ return rfcsr24;
++}
++
++static int rt2800pci_init_rfcsr(struct rt2x00_dev *rt2x00dev)
++{
++ u8 rfcsr;
++ u8 bbp;
++
++ if (!rt2x00_rf(&rt2x00dev->chip, RF3020) &&
++ !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
++ !rt2x00_rf(&rt2x00dev->chip, RF3022))
++ return 0;
++
++ /*
++ * Init RF calibration.
++ */
++ rt2800pci_rfcsr_read(rt2x00dev, 30, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
++ rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr);
++ msleep(1);
++ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
++ rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr);
++
++ rt2800pci_rfcsr_write(rt2x00dev, 0, 0x50);
++ rt2800pci_rfcsr_write(rt2x00dev, 1, 0x01);
++ rt2800pci_rfcsr_write(rt2x00dev, 2, 0xf7);
++ rt2800pci_rfcsr_write(rt2x00dev, 3, 0x75);
++ rt2800pci_rfcsr_write(rt2x00dev, 4, 0x40);
++ rt2800pci_rfcsr_write(rt2x00dev, 5, 0x03);
++ rt2800pci_rfcsr_write(rt2x00dev, 6, 0x02);
++ rt2800pci_rfcsr_write(rt2x00dev, 7, 0x50);
++ rt2800pci_rfcsr_write(rt2x00dev, 8, 0x39);
++ rt2800pci_rfcsr_write(rt2x00dev, 9, 0x0f);
++ rt2800pci_rfcsr_write(rt2x00dev, 10, 0x60);
++ rt2800pci_rfcsr_write(rt2x00dev, 11, 0x21);
++ rt2800pci_rfcsr_write(rt2x00dev, 12, 0x75);
++ rt2800pci_rfcsr_write(rt2x00dev, 13, 0x75);
++ rt2800pci_rfcsr_write(rt2x00dev, 14, 0x90);
++ rt2800pci_rfcsr_write(rt2x00dev, 15, 0x58);
++ rt2800pci_rfcsr_write(rt2x00dev, 16, 0xb3);
++ rt2800pci_rfcsr_write(rt2x00dev, 17, 0x92);
++ rt2800pci_rfcsr_write(rt2x00dev, 18, 0x2c);
++ rt2800pci_rfcsr_write(rt2x00dev, 19, 0x02);
++ rt2800pci_rfcsr_write(rt2x00dev, 20, 0xba);
++ rt2800pci_rfcsr_write(rt2x00dev, 21, 0xdb);
++ rt2800pci_rfcsr_write(rt2x00dev, 22, 0x00);
++ rt2800pci_rfcsr_write(rt2x00dev, 23, 0x31);
++ rt2800pci_rfcsr_write(rt2x00dev, 24, 0x08);
++ rt2800pci_rfcsr_write(rt2x00dev, 25, 0x01);
++ rt2800pci_rfcsr_write(rt2x00dev, 26, 0x25);
++ rt2800pci_rfcsr_write(rt2x00dev, 27, 0x23);
++ rt2800pci_rfcsr_write(rt2x00dev, 28, 0x13);
++ rt2800pci_rfcsr_write(rt2x00dev, 29, 0x83);
++
++ /*
++ * Set RX Filter calibration for 20MHz and 40MHz
++ */
++ rt2x00dev->calibration_bw20 =
++ rt2800pci_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
++ rt2x00dev->calibration_bw40 =
++ rt2800pci_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
++
++ /*
++ * Set back to initial state
++ */
++ rt2800pci_bbp_write(rt2x00dev, 24, 0);
++
++ rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
++ rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr);
++
++ /*
++ * set BBP back to BW20
++ */
++ rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
++ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
++ rt2800pci_bbp_write(rt2x00dev, 4, bbp);
++
++ return 0;
++}
++
+ /*
+ * Device state switch handlers.
+ */
+@@ -1718,7 +1999,8 @@ static int rt2800pci_enable_radio(struct
+ rt2800pci_init_queues(rt2x00dev) ||
+ rt2800pci_init_registers(rt2x00dev) ||
+ rt2800pci_wait_wpdma_ready(rt2x00dev) ||
+- rt2800pci_init_bbp(rt2x00dev)))
++ rt2800pci_init_bbp(rt2x00dev) ||
++ rt2800pci_init_rfcsr(rt2x00dev)))
+ return -EIO;
+
+ /*
+@@ -2114,6 +2396,12 @@ static void rt2800pci_fill_rxdone(struct
+ rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
+
+ /*
++ * Set RX IDX in register to inform hardware that we have handled
++ * this entry and it is available for reuse again.
++ */
++ rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx);
++
++ /*
+ * Remove TXWI descriptor from start of buffer.
+ */
+ skb_pull(entry->skb, RXWI_DESC_SIZE);
+@@ -2380,7 +2668,8 @@ static int rt2800pci_init_eeprom(struct
+ !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF2020) &&
+- !rt2x00_rf(&rt2x00dev->chip, RF3052)) {
++ !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
++ !rt2x00_rf(&rt2x00dev->chip, RF3022)) {
+ ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
+ return -ENODEV;
+ }
+@@ -2528,7 +2817,8 @@ static int rt2800pci_probe_hw_mode(struc
+
+ if (rt2x00_rf(&rt2x00dev->chip, RF2820) ||
+ rt2x00_rf(&rt2x00dev->chip, RF2720) ||
+- rt2x00_rf(&rt2x00dev->chip, RF3052)) {
++ rt2x00_rf(&rt2x00dev->chip, RF3021) ||
++ rt2x00_rf(&rt2x00dev->chip, RF3022)) {
+ spec->num_channels = 14;
+ spec->channels = rf_vals;
+ } else if (rt2x00_rf(&rt2x00dev->chip, RF2850) ||
+@@ -2624,7 +2914,9 @@ static int rt2800pci_probe_hw(struct rt2
+ /*
+ * This device requires firmware.
+ */
+- __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
++ if (!rt2x00_rt(&rt2x00dev->chip, RT2880) &&
++ !rt2x00_rt(&rt2x00dev->chip, RT3052))
++ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
+ if (!modparam_nohwcrypt)
+ __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
+
+--- a/drivers/net/wireless/rt2x00/rt2800pci.h
++++ b/drivers/net/wireless/rt2x00/rt2800pci.h
+@@ -36,7 +36,8 @@
+ * RF2750 2.4G/5G 1T2R
+ * RF3020 2.4G 1T1R
+ * RF2020 2.4G B/G
+- * RF3052 2.4G 2T2R
++ * RF3021 2.4G 1T2R
++ * RF3022 2.4G 2T2R
+ */
+ #define RF2820 0x0001
+ #define RF2850 0x0002
+@@ -44,7 +45,8 @@
+ #define RF2750 0x0004
+ #define RF3020 0x0005
+ #define RF2020 0x0006
+-#define RF3052 0x0008
++#define RF3021 0x0007
++#define RF3022 0x0008
+
+ /*
+ * RT2860 version
+@@ -373,6 +375,15 @@
+ #define PBF_DBG 0x043c
+
+ /*
++ * RF registers
++ */
++#define RF_CSR_CFG 0x0500
++#define RF_CSR_CFG_DATA FIELD32(0x000000ff)
++#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00)
++#define RF_CSR_CFG_WRITE FIELD32(0x00010000)
++#define RF_CSR_CFG_BUSY FIELD32(0x00020000)
++
++/*
+ * MAC Control/Status Registers(CSR).
+ * Some values are set in TU, whereas 1 TU == 1024 us.
+ */
+@@ -1465,6 +1476,48 @@ struct mac_iveiv_entry {
+ * BBP 3: RX Antenna
+ */
+ #define BBP3_RX_ANTENNA FIELD8(0x18)
++#define BBP3_HT40_PLUS FIELD8(0x20)
++
++/*
++ * BBP 4: Bandwidth
++ */
++#define BBP4_TX_BF FIELD8(0x01)
++#define BBP4_BANDWIDTH FIELD8(0x18)
++
++/*
++ * RFCSR registers
++ * The wordsize of the RFCSR is 8 bits.
++ */
++
++/*
++ * RFCSR 6:
++ */
++#define RFCSR6_R FIELD8(0x03)
++
++/*
++ * RFCSR 7:
++ */
++#define RFCSR7_RF_TUNING FIELD8(0x01)
++
++/*
++ * RFCSR 12:
++ */
++#define RFCSR12_TX_POWER FIELD8(0x1f)
++
++/*
++ * RFCSR 22:
++ */
++#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01)
++
++/*
++ * RFCSR 23:
++ */
++#define RFCSR23_FREQ_OFFSET FIELD8(0x7f)
++
++/*
++ * RFCSR 30:
++ */
++#define RFCSR30_RF_CALIBRATION FIELD8(0x80)
+
+ /*
+ * RF registers
diff --git a/package/mac80211/patches/308-rt2x00-Fix-fill_rxdone-rt2800pci.patch b/package/mac80211/patches/308-rt2x00-Fix-fill_rxdone-rt2800pci.patch
deleted file mode 100644
index 3cb6147..0000000
--- a/package/mac80211/patches/308-rt2x00-Fix-fill_rxdone-rt2800pci.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 89950075234deb1f98ff52b225487ffc5b8199b0 Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sun, 8 Mar 2009 16:47:28 +0100
-Subject: [PATCH] rt2x00: Fix fill_rxdone (rt2800pci)
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2800pci.c | 2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2800pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
-@@ -2037,7 +2037,7 @@ static void rt2800pci_fill_rxdone(struct
- /*
- * Remove TXWI descriptor from start of buffer.
- */
-- skb_pull(entry->skb, TXWI_DESC_SIZE);
-+ skb_pull(entry->skb, RXWI_DESC_SIZE);
- skb_trim(entry->skb, rxdesc->size);
- }
-
diff --git a/package/mac80211/patches/309-rt2x00-Fix-compile-errors-for-SoC.patch b/package/mac80211/patches/309-rt2x00-Fix-compile-errors-for-SoC.patch
new file mode 100644
index 0000000..25c0779
--- /dev/null
+++ b/package/mac80211/patches/309-rt2x00-Fix-compile-errors-for-SoC.patch
@@ -0,0 +1,136 @@
+From e6cbd7e05f7c1fe0a737526d20f39b4a52e03ae8 Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Tue, 17 Mar 2009 14:01:29 +0100
+Subject: [PATCH] rt2x00: Fix compile errors for SoC
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2800pci.c | 37 +++++++++++++++----------------
+ 1 files changed, 18 insertions(+), 19 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800pci.c
++++ b/drivers/net/wireless/rt2x00/rt2800pci.c
+@@ -3186,7 +3186,7 @@ MODULE_LICENSE("GPL");
+ #define WSOC_RT_CHIPSET RT3052
+ #endif /* CONFIG_RALINK_RT305X */
+
+-static void rt2800soc_free_reg(struct rt2x00_dev *rt2x00dev)
++static void rt2x00soc_free_reg(struct rt2x00_dev *rt2x00dev)
+ {
+ kfree(rt2x00dev->rf);
+ rt2x00dev->rf = NULL;
+@@ -3195,7 +3195,7 @@ static void rt2800soc_free_reg(struct rt
+ rt2x00dev->eeprom = NULL;
+ }
+
+-static int rt2800soc_alloc_reg(struct rt2x00_dev *rt2x00dev)
++static int rt2x00soc_alloc_reg(struct rt2x00_dev *rt2x00dev)
+ {
+ struct platform_device *pdev = to_platform_device(rt2x00dev->dev);
+ struct resource *res;
+@@ -3219,14 +3219,14 @@ static int rt2800soc_alloc_reg(struct rt
+
+ exit:
+ ERROR_PROBE("Failed to allocate registers.\n");
+- rt2800soc_free_reg(rt2x00dev);
++ rt2x00soc_free_reg(rt2x00dev);
+
+ return -ENOMEM;
+ }
+
+-static int rt2800soc_probe(struct platform_device *pdev)
++static int rt2x00soc_probe(struct platform_device *pdev)
+ {
+- struct rt2x00_ops *ops = (struct rt2x00_ops *)pdev->driver->p;
++ const struct rt2x00_ops *ops = &rt2800pci_ops;
+ struct ieee80211_hw *hw;
+ struct rt2x00_dev *rt2x00dev;
+ int retval;
+@@ -3248,7 +3248,7 @@ static int rt2800soc_probe(struct platfo
+
+ rt2x00_set_chip_rt(rt2x00dev, WSOC_RT_CHIPSET);
+
+- retval = rt2800soc_alloc_reg(rt2x00dev);
++ retval = rt2x00soc_alloc_reg(rt2x00dev);
+ if (retval)
+ goto exit_free_device;
+
+@@ -3259,7 +3259,7 @@ static int rt2800soc_probe(struct platfo
+ return 0;
+
+ exit_free_reg:
+- rt2800soc_free_reg(rt2x00dev);
++ rt2x00soc_free_reg(rt2x00dev);
+
+ exit_free_device:
+ ieee80211_free_hw(hw);
+@@ -3267,7 +3267,7 @@ exit_free_device:
+ return retval;
+ }
+
+-static int rt2800soc_remove(struct platform_device *pdev)
++static int rt2x00soc_remove(struct platform_device *pdev)
+ {
+ struct ieee80211_hw *hw = platform_get_drvdata(pdev);
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+@@ -3276,16 +3276,16 @@ static int rt2800soc_remove(struct platf
+ * Free all allocated data.
+ */
+ rt2x00lib_remove_dev(rt2x00dev);
+- rt2800soc_free_reg(rt2x00dev);
++ rt2x00soc_free_reg(rt2x00dev);
+ ieee80211_free_hw(hw);
+
+ return 0;
+ }
+
+ #ifdef CONFIG_PM
+-int rt2x00soc_suspend(struct device *dev, pm_message_t state)
++int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state)
+ {
+- struct ieee80211_hw *hw = dev_get_drvdata(dev);
++ struct ieee80211_hw *hw = platform_get_drvdata(pdev);
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ int retval;
+
+@@ -3293,14 +3293,14 @@ int rt2x00soc_suspend(struct device *dev
+ if (retval)
+ return retval;
+
+- rt2800soc_free_reg(rt2x00dev);
++ rt2x00soc_free_reg(rt2x00dev);
+
+ return 0;
+ }
+
+-int rt2x00soc_resume(struct device *dev)
++int rt2x00soc_resume(struct platform_device *pdev)
+ {
+- struct ieee80211_hw *hw = dev_get_drvdata(dev);
++ struct ieee80211_hw *hw = platform_get_drvdata(pdev);
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ int retval;
+
+@@ -3315,7 +3315,7 @@ int rt2x00soc_resume(struct device *dev)
+ return 0;
+
+ exit_free_reg:
+- rt2x00pci_free_reg(rt2x00dev);
++ rt2x00soc_free_reg(rt2x00dev);
+
+ return retval;
+ }
+@@ -3326,10 +3326,9 @@ static struct platform_driver rt2800soc_
+ .name = "rt2800_wmac",
+ .owner = THIS_MODULE,
+ .mod_name = KBUILD_MODNAME,
+- .p = &rt2800pci_ops;
+- }
+- .probe = rt2800soc_probe,
+- .remove = __devexit_p(rt2800soc_remove),
++ },
++ .probe = rt2x00soc_probe,
++ .remove = __devexit_p(rt2x00soc_remove),
+ .suspend = rt2x00soc_suspend,
+ .resume = rt2x00soc_resume,
+ };
diff --git a/package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch b/package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch
index 5fe8a3a..4fe0e46 100644
--- a/package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch
+++ b/package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
-@@ -1024,6 +1024,9 @@ static void ath_unregister_led(struct at
+@@ -1031,6 +1031,9 @@ static void ath_unregister_led(struct at
static void ath_deinit_leds(struct ath_softc *sc)
{
@@ -10,7 +10,7 @@
cancel_delayed_work_sync(&sc->ath_led_blink_work);
ath_unregister_led(&sc->assoc_led);
sc->sc_flags &= ~SC_OP_LED_ASSOCIATED;
-@@ -1038,6 +1041,9 @@ static void ath_init_leds(struct ath_sof
+@@ -1045,6 +1048,9 @@ static void ath_init_leds(struct ath_sof
char *trigger;
int ret;
diff --git a/package/mac80211/patches/402-ath9k-enable-debug.patch b/package/mac80211/patches/402-ath9k-enable-debug.patch
index d1e800c..24234eb 100644
--- a/package/mac80211/patches/402-ath9k-enable-debug.patch
+++ b/package/mac80211/patches/402-ath9k-enable-debug.patch
@@ -1,11 +1,11 @@
--- a/config.mk
+++ b/config.mk
-@@ -111,7 +111,7 @@ ifneq ($(CONFIG_PCI),)
+@@ -125,7 +125,7 @@ ifneq ($(CONFIG_PCI),)
CONFIG_ATH5K=m
- # CONFIG_ATH5K_DEBUG is not set
+ # CONFIG_ATH5K_DEBUG=y
CONFIG_ATH9K=m
--# CONFIG_ATH9K_DEBUG is not set
+-# CONFIG_ATH9K_DEBUG=y
+CONFIG_ATH9K_DEBUG=y
- CONFIG_IWLWIFI=m
+ # CONFIG_IWLWIFI=m
diff --git a/package/mac80211/patches/403-ath9k-fix-invalid-mac-address-handling.patch b/package/mac80211/patches/403-ath9k-fix-invalid-mac-address-handling.patch
index 8f41b5b..69d3210 100644
--- a/package/mac80211/patches/403-ath9k-fix-invalid-mac-address-handling.patch
+++ b/package/mac80211/patches/403-ath9k-fix-invalid-mac-address-handling.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath9k/hw.c
+++ b/drivers/net/wireless/ath9k/hw.c
-@@ -494,11 +494,18 @@ static int ath9k_hw_init_macaddr(struct
+@@ -513,11 +513,18 @@ static int ath9k_hw_init_macaddr(struct
ah->macaddr[2 * i] = eeval >> 8;
ah->macaddr[2 * i + 1] = eeval & 0xff;
}