ath10k-ct: activate user space firmware loading again

This backports a patch from kernel 4.14 to the ath10k-ct version based
on kernel 4.13.
Some devices are using a user space script to load the calibration data
from the flash and this was not trigged any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

4 files changed, 46 insertions, 10 deletions

diff --git a/package/kernel/ath10k-ct/patches/100-kernel_compat.patch b/package/kernel/ath10k-ct/patches/100-kernel_compat.patch
index 58d6b54..beb0abf 100644
--- a/package/kernel/ath10k-ct/patches/100-kernel_compat.patch
+++ b/package/kernel/ath10k-ct/patches/100-kernel_compat.patch
@@ -17,7 +17,7 @@
  
  	firmware = ar->normal_mode_fw.fw_file.firmware;
  	if (firmware)
-@@ -3413,7 +3413,7 @@ int ath10k_debug_register(struct ath10k
+@@ -3422,7 +3422,7 @@ int ath10k_debug_register(struct ath10k
  	debugfs_create_file("nf_cal_period", S_IRUSR | S_IWUSR,
  			    ar->debug.debugfs_phy, ar, &fops_nf_cal_period);
  
@@ -28,7 +28,7 @@
  				    &fops_simulate_radar);
 --- a/ath10k/mac.c
 +++ b/ath10k/mac.c
-@@ -3596,7 +3596,7 @@ static void ath10k_regd_update(struct at
+@@ -3604,7 +3604,7 @@ static void ath10k_regd_update(struct at
  
  	regpair = ar->ath_common.regulatory.regpair;
  
@@ -37,7 +37,7 @@
  		nl_dfs_reg = ar->dfs_detector->region;
  		wmi_dfs_reg = ath10k_mac_get_dfs_region(nl_dfs_reg);
  		ath10k_dbg(ar, ATH10K_DBG_REGULATORY,
-@@ -3630,7 +3630,7 @@ static void ath10k_reg_notifier(struct w
+@@ -3638,7 +3638,7 @@ static void ath10k_reg_notifier(struct w
  
  	ath_reg_notifier_apply(wiphy, request, &ar->ath_common.regulatory);
  
@@ -46,7 +46,7 @@
  		ath10k_dbg(ar, ATH10K_DBG_REGULATORY, "reg-notifier: dfs region 0x%x\n",
  			   request->dfs_region);
  		result = ar->dfs_detector->set_dfs_domain(ar->dfs_detector,
-@@ -8925,7 +8925,7 @@ int ath10k_mac_register(struct ath10k *a
+@@ -8938,7 +8938,7 @@ int ath10k_mac_register(struct ath10k *a
  	if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags))
  		ar->hw->netdev_features = NETIF_F_HW_CSUM;
  
@@ -55,7 +55,7 @@
  		/* Init ath dfs pattern detector */
  		ar->ath_common.debug_mask = ATH_DBG_DFS;
  		ar->dfs_detector = dfs_pattern_detector_init(&ar->ath_common,
-@@ -8970,7 +8970,7 @@ err_unregister:
+@@ -8983,7 +8983,7 @@ err_unregister:
  	ieee80211_unregister_hw(ar->hw);
  
  err_dfs_detector_exit:
@@ -64,7 +64,7 @@
  		ar->dfs_detector->exit(ar->dfs_detector);
  
  err_free:
-@@ -8985,7 +8985,7 @@ void ath10k_mac_unregister(struct ath10k
+@@ -8998,7 +8998,7 @@ void ath10k_mac_unregister(struct ath10k
  {
  	ieee80211_unregister_hw(ar->hw);
  
diff --git a/package/kernel/ath10k-ct/patches/110-api_fix.patch b/package/kernel/ath10k-ct/patches/110-api_fix.patch
index 5f7de4a..9439dd7 100644
--- a/package/kernel/ath10k-ct/patches/110-api_fix.patch
+++ b/package/kernel/ath10k-ct/patches/110-api_fix.patch
@@ -1,6 +1,6 @@
 --- a/ath10k/htt_rx.c
 +++ b/ath10k/htt_rx.c
-@@ -2497,7 +2497,7 @@ bool ath10k_htt_t2h_msg_handler(struct a
+@@ -2514,7 +2514,7 @@ bool ath10k_htt_t2h_msg_handler(struct a
  		u32 freq = __le32_to_cpu(resp->chan_change.freq);
  
  		ar->tgt_oper_chan =
diff --git a/package/kernel/ath10k-ct/patches/120-mac80211-4-14-api.patch b/package/kernel/ath10k-ct/patches/120-mac80211-4-14-api.patch
index 032a0bc..d587632 100644
--- a/package/kernel/ath10k-ct/patches/120-mac80211-4-14-api.patch
+++ b/package/kernel/ath10k-ct/patches/120-mac80211-4-14-api.patch
@@ -51,7 +51,7 @@
  		break;
  	default:
  		break;
-@@ -883,13 +883,10 @@ static void ath10k_htt_rx_h_ppdu(struct
+@@ -900,13 +900,10 @@ static void ath10k_htt_rx_h_ppdu(struct
  		/* New PPDU starts so clear out the old per-PPDU status. */
  		status->freq = 0;
  		status->rate_idx = 0;
@@ -69,7 +69,7 @@
  		status->flag |= RX_FLAG_NO_SIGNAL_VAL;
  
  		ath10k_htt_rx_h_signal(ar, status, rxd);
-@@ -942,7 +939,7 @@ static void ath10k_process_rx(struct ath
+@@ -959,7 +956,7 @@ static void ath10k_process_rx(struct ath
  	*status = *rx_status;
  
  	ath10k_dbg(ar, ATH10K_DBG_DATA,
@@ -78,7 +78,7 @@
  		   skb,
  		   skb->len,
  		   ieee80211_get_SA(hdr),
-@@ -950,15 +947,15 @@ static void ath10k_process_rx(struct ath
+@@ -967,15 +964,15 @@ static void ath10k_process_rx(struct ath
  		   is_multicast_ether_addr(ieee80211_get_DA(hdr)) ?
  							"mcast" : "ucast",
  		   (__le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4,
diff --git a/package/kernel/ath10k-ct/patches/130-ath10k-activate-user-space-firmware-loading-again.patch b/package/kernel/ath10k-ct/patches/130-ath10k-activate-user-space-firmware-loading-again.patch
new file mode 100644
index 0000000..dc02a9d
--- /dev/null
+++ b/package/kernel/ath10k-ct/patches/130-ath10k-activate-user-space-firmware-loading-again.patch
@@ -0,0 +1,36 @@
+From c0cc00f250e19c717fc9cdbdb7f55aaa569c7498 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Thu, 24 Aug 2017 23:06:41 +0200
+Subject: [PATCH] ath10k: activate user space firmware loading again
+
+In commit 9f5bcfe93315 ("ath10k: silence firmware file probing
+warnings") the firmware loading was changed from request_firmware() to
+request_firmware_direct() to silence some warnings in case it fails.
+request_firmware_direct() directly searches in the file system only and
+does not send a hotplug event to user space in case it could not find
+the firmware directly.
+In LEDE we use a user space script to extract the calibration data from
+the flash memory which gets triggered by the hotplug event. This way the
+firmware gets extracted from some vendor specific partition when the
+driver requests this firmware. This mechanism does not work any more
+after this change.
+
+Fixes: 9f5bcfe93315 ("ath10k: silence firmware file probing warnings")
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+Cc: Michal Kazior <michal.kazior@tieto.com>
+Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
+---
+ ath10k-4.13/core.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/ath10k-4.13/core.c
++++ b/ath10k-4.13/core.c
+@@ -556,7 +556,7 @@ static const struct firmware *ath10k_fet
+ 		dir = ".";
+ 
+ 	snprintf(filename, sizeof(filename), "%s/%s", dir, file);
+-	ret = request_firmware_direct(&fw, filename, ar->dev);
++	ret = request_firmware(&fw, filename, ar->dev);
+ 	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot fw request '%s': %d\n",
+ 		   filename, ret);
+