6to4: add netifd support

SVN-Revision: 30949

5 files changed, 411 insertions, 134 deletions

diff --git a/package/6to4/Makefile b/package/6to4/Makefile
index 8cf66c0..4563964 100644
--- a/package/6to4/Makefile
+++ b/package/6to4/Makefile
@@ -34,11 +34,20 @@ endef
 define Build/Configure
 endef
 
-define Package/6to4/install
-	$(INSTALL_DIR) $(1)/lib/network
-	$(INSTALL_DATA) ./files/6to4.sh $(1)/lib/network/6to4.sh
+ifneq ($(CONFIG_PACKAGE_netifd),)
+  define Package/6to4/install
+	$(INSTALL_DIR) $(1)/lib/netifd/proto
+	$(INSTALL_BIN) ./files/6to4.sh $(1)/lib/netifd/proto/6to4.sh
 	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
 	$(INSTALL_DATA) ./files/6to4.hotplug $(1)/etc/hotplug.d/iface/91-6to4
-endef
+  endef
+else
+  define Package/6to4/install
+	$(INSTALL_DIR) $(1)/lib/network
+	$(INSTALL_DATA) ./files.old/6to4.sh $(1)/lib/network/6to4.sh
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
+	$(INSTALL_DATA) ./files.old/6to4.hotplug $(1)/etc/hotplug.d/iface/91-6to4
+  endef
+endif
 
 $(eval $(call BuildPackage,6to4))
diff --git a/package/6to4/files.old/6to4.hotplug b/package/6to4/files.old/6to4.hotplug
new file mode 100644
index 0000000..1e3d26c
--- /dev/null
+++ b/package/6to4/files.old/6to4.hotplug
@@ -0,0 +1,34 @@
+#!/bin/sh
+
+if [ "$ACTION" = ifup ]; then
+	. /etc/functions.sh
+
+	include /lib/network
+	scan_interfaces
+
+	update_tunnel() {
+		local cfg="$1"
+
+		local proto
+		config_get proto "$cfg" proto
+		[ "$proto" = 6to4 ] || return 0
+
+		local wandev
+		config_get wandev "$cfg" wan_device "$(find_6to4_wanif)"
+		[ "$wandev" = "$DEVICE" ] || return 0
+
+		local wanip=$(find_6to4_wanip "$wandev")
+
+		[ -n "$wanip" ] && {
+			lsmod | grep -q ^sit || {
+				logger -t 6to4 "Tunneling driver not loaded yet, deferring action"
+				exit 0
+			}
+
+			uci_set_state network "$cfg" ipaddr "$wanip"
+			( ifup "$cfg" )&
+		}
+	}
+
+	config_foreach update_tunnel interface
+fi
diff --git a/package/6to4/files.old/6to4.sh b/package/6to4/files.old/6to4.sh
new file mode 100755
index 0000000..f7f48e5
--- /dev/null
+++ b/package/6to4/files.old/6to4.sh
@@ -0,0 +1,273 @@
+# 6to4.sh - IPv6-in-IPv4 tunnel backend
+# Copyright (c) 2010-2011 OpenWrt.org
+
+find_6to4_wanif() {
+	local if=$(ip -4 r l e 0.0.0.0/0); if="${if#default* dev }"; if="${if%% *}"
+	[ -n "$if" ] && grep -qs "^ *$if:" /proc/net/dev && echo "$if"
+}
+
+find_6to4_wanip() {
+	local ip=$(ip -4 a s dev "$1"); ip="${ip#*inet }"
+	echo "${ip%%[^0-9.]*}"
+}
+
+find_6to4_prefix() {
+	local ip4="$1"
+	local oIFS="$IFS"; IFS="."; set -- $ip4; IFS="$oIFS"
+
+	printf "2002:%02x%02x:%02x%02x\n" $1 $2 $3 $4
+}
+
+test_6to4_rfc1918()
+{
+	local oIFS="$IFS"; IFS="."; set -- $1; IFS="$oIFS"
+	[ $1 -eq  10 ] && return 0
+	[ $1 -eq 192 ] && [ $2 -eq 168 ] && return 0
+	[ $1 -eq 172 ] && [ $2 -ge  16 ] && [ $2 -le  31 ] && return 0
+	return 1
+}
+
+set_6to4_radvd_interface() {
+	local cfgid="$1"
+	local lanif="${2:-lan}"
+	local ifmtu="${3:-1280}"
+	local ifsection=""
+
+	find_ifsection() {
+		local net
+		local cfg="$1"
+		config_get net "$cfg" interface
+
+		[ "$net" = "$lanif" ] && {
+			ifsection="$cfg"
+			return 1
+		}
+	}
+
+	config_foreach find_ifsection interface
+
+	[ -z "$ifsection" ] && {
+		ifsection="iface_$sid"
+		uci_set_state radvd "$ifsection" "" interface
+		uci_set_state radvd "$ifsection" interface "$lanif"
+	}
+
+	uci_set_state radvd "$ifsection" ignore            0
+	uci_set_state radvd "$ifsection" IgnoreIfMissing   1
+	uci_set_state radvd "$ifsection" AdvSendAdvert     1
+	uci_set_state radvd "$ifsection" MaxRtrAdvInterval 30
+	uci_set_state radvd "$ifsection" AdvLinkMTU        "$ifmtu"
+}
+
+set_6to4_radvd_prefix() {
+	local cfgid="$1"
+	local lanif="${2:-lan}"
+	local wanif="${3:-wan}"
+	local prefix="${4:-0:0:0:1::/64}"
+	local vlt="${5:-300}"
+	local plt="${6:-120}"
+	local pfxsection=""
+
+	find_pfxsection() {
+		local net base
+		local cfg="$1"
+		config_get net  "$cfg" interface
+		config_get base "$cfg" Base6to4Interface
+
+		[ "$net" = "$lanif" ] && [ "$base" = "$wanif" ] && {
+			pfxsection="$cfg"
+			return 1
+		}
+	}
+
+	config_foreach find_pfxsection prefix
+
+	[ -z "$pfxsection" ] && {
+		pfxsection="prefix_${sid}_${lanif}"
+		uci_set_state radvd "$pfxsection" ""                   prefix
+		uci_set_state radvd "$pfxsection" ignore               0
+		uci_set_state radvd "$pfxsection" interface            "$lanif"
+		uci_set_state radvd "$pfxsection" prefix               "$prefix"
+		uci_set_state radvd "$pfxsection" AdvOnLink            1
+		uci_set_state radvd "$pfxsection" AdvAutonomous        1
+		uci_set_state radvd "$pfxsection" AdvValidLifetime     "$vlt"
+		uci_set_state radvd "$pfxsection" AdvPreferredLifetime "$plt"
+		uci_set_state radvd "$pfxsection" Base6to4Interface    "$wanif"
+	}
+}
+
+
+# Hook into scan_interfaces() to synthesize a .device option
+# This is needed for /sbin/ifup to properly dispatch control
+# to setup_interface_6to4() even if no .ifname is set in
+# the configuration.
+scan_6to4() {
+	config_set "$1" device "6to4-$1"
+}
+
+coldplug_interface_6to4() {
+	setup_interface_6to4 "6to4-$1" "$1"
+}
+
+setup_interface_6to4() {
+	local iface="$1"
+	local cfg="$2"
+	local link="6to4-$cfg"
+
+	local local4=$(uci_get network "$cfg" ipaddr)
+
+	local mtu
+	config_get mtu "$cfg" mtu
+
+	local ttl
+	config_get ttl "$cfg" ttl
+
+	local metric
+	config_get metric "$cfg" metric
+
+	local defaultroute
+	config_get_bool defaultroute "$cfg" defaultroute 1
+
+	local wanif=$(find_6to4_wanif)
+	[ -z "$wanif" ] && {
+		logger -t "$link" "Cannot find wan interface - aborting"
+		return
+	}
+
+	local wancfg=$(find_config "$wanif")
+	[ -z "$wancfg" ] && {
+		logger -t "$link" "Cannot find wan network - aborting"
+		return
+	}
+
+	# If local4 is unset, guess local IPv4 address from the
+	# interface used by the default route.
+	[ -z "$local4" ] && {
+		[ -n "$wanif" ] && {
+			local4=$(find_6to4_wanip "$wanif")
+			uci_set_state network "$cfg" wan_device "$wanif"
+		}
+	}
+
+	test_6to4_rfc1918 "$local4" && {
+		logger -t "$link" "Local wan ip $local4 is private - aborting"
+		return
+	}
+
+	[ -n "$local4" ] && {
+		logger -t "$link" "Starting ..."
+
+		# creating the tunnel below will trigger a net subsystem event
+		# prevent it from touching or iface by disabling .auto here
+		uci_set_state network "$cfg" ifname $link
+		uci_set_state network "$cfg" auto 0
+
+		# find our local prefix
+		local prefix6=$(find_6to4_prefix "$local4")
+		local local6="$prefix6::1/16"
+
+		logger -t "$link" " * IPv4 address is $local4"
+		logger -t "$link" " * IPv6 address is $local6"
+		ip tunnel add $link mode sit remote any local $local4 ttl ${ttl:-64}
+		ip link set $link up
+		ip link set mtu ${mtu:-1280} dev $link
+		ip addr add $local6 dev $link
+
+		uci_set_state network "$cfg" ipaddr $local4
+		uci_set_state network "$cfg" ip6addr $local6
+
+		[ "$defaultroute" = 1 ] && {
+			logger -t "$link" " * Adding default route"
+			ip -6 route add ::/0 via ::192.88.99.1 metric ${metric:-1} dev $link
+			uci_set_state network "$cfg" defaultroute 1
+		}
+
+		[ -f /etc/config/radvd ] && /etc/init.d/radvd enabled && {
+			local sid="6to4_$cfg"
+
+			uci_revert_state radvd
+			config_load radvd
+
+			# find delegation target
+			local adv_interface
+			config_get adv_interface "$cfg" adv_interface
+
+			local adv_subnet=$(uci_get network "$cfg" adv_subnet)
+			      adv_subnet=$((0x${adv_subnet:-1}))
+
+			local adv_subnets=""
+
+			for adv_interface in ${adv_interface:-lan}; do
+				local adv_ifname
+				config_get adv_ifname "${adv_interface:-lan}" ifname
+
+				grep -qs "^ *$adv_ifname:" /proc/net/dev && {
+					local adv_valid_lifetime adv_preferred_lifetime
+					config_get adv_valid_lifetime     "$cfg" adv_valid_lifetime
+					config_get adv_preferred_lifetime "$cfg" adv_preferred_lifetime
+
+					local subnet6="$(printf "%s:%x::1/64" "$prefix6" $adv_subnet)"
+
+					logger -t "$link" " * Advertising IPv6 subnet $subnet6 on ${adv_interface:-lan} ($adv_ifname)"
+					ip -6 addr add $subnet6 dev $adv_ifname
+
+					set_6to4_radvd_interface "$sid" "$adv_interface" "$mtu"
+					set_6to4_radvd_prefix    "$sid" "$adv_interface" \
+						"$wancfg" "$(printf "0:0:0:%x::/64" $adv_subnet)" \
+						"$adv_valid_lifetime" "$adv_preferred_lifetime"
+
+					adv_subnets="${adv_subnets:+$adv_subnets }$adv_ifname:$subnet6"
+					adv_subnet=$(($adv_subnet + 1))
+				}
+			done
+
+			uci_set_state network "$cfg" adv_subnets "$adv_subnets"
+
+			/etc/init.d/radvd restart
+		}
+
+		logger -t "$link" "... started"
+
+		env -i ACTION="ifup" INTERFACE="$cfg" DEVICE="$link" PROTO=6to4 /sbin/hotplug-call "iface" &
+	} || {
+		echo "Cannot determine local IPv4 address for 6to4 tunnel $cfg - skipping"
+	}
+}
+
+stop_interface_6to4() {
+	local cfg="$1"
+	local link="6to4-$cfg"
+
+	local local6=$(uci_get_state network "$cfg" ip6addr)
+	local defaultroute=$(uci_get_state network "$cfg" defaultroute)
+
+	local adv_subnets=$(uci_get_state network "$cfg" adv_subnets)
+
+	grep -qs "^ *$link:" /proc/net/dev && {
+		logger -t "$link" "Shutting down ..."
+		env -i ACTION="ifdown" INTERFACE="$cfg" DEVICE="$link" PROTO=6to4 /sbin/hotplug-call "iface" &
+
+		[ -n "$adv_subnets" ] && {
+			uci_revert_state radvd
+			/etc/init.d/radvd enabled && /etc/init.d/radvd restart
+
+			local adv_subnet
+			for adv_subnet in $adv_subnets; do
+				local ifname="${adv_subnet%%:*}"
+				local subnet="${adv_subnet#*:}"
+
+				logger -t "$link" " * Removing IPv6 subnet $subnet from interface $ifname"
+				ip -6 addr del $subnet dev $ifname
+			done
+		}
+
+		[ "$defaultroute" = "1" ] && \
+			ip -6 route del ::/0 via ::192.88.99.1 dev $link
+
+		ip addr del $local6 dev $link
+		ip link set $link down
+		ip tunnel del $link
+
+		logger -t "$link" "... stopped"
+	}
+}
diff --git a/package/6to4/files/6to4.hotplug b/package/6to4/files/6to4.hotplug
index 1e3d26c..202a3c7 100644
--- a/package/6to4/files/6to4.hotplug
+++ b/package/6to4/files/6to4.hotplug
@@ -3,6 +3,9 @@
 if [ "$ACTION" = ifup ]; then
 	. /etc/functions.sh
 
+	INCLUDE_ONLY=1
+	. /lib/netifd/proto/6to4.sh
+
 	include /lib/network
 	scan_interfaces
 
@@ -19,15 +22,7 @@ if [ "$ACTION" = ifup ]; then
 
 		local wanip=$(find_6to4_wanip "$wandev")
 
-		[ -n "$wanip" ] && {
-			lsmod | grep -q ^sit || {
-				logger -t 6to4 "Tunneling driver not loaded yet, deferring action"
-				exit 0
-			}
-
-			uci_set_state network "$cfg" ipaddr "$wanip"
-			( ifup "$cfg" )&
-		}
+		[ -n "$wanip" ] && ifup "$cfg"
 	}
 
 	config_foreach update_tunnel interface
diff --git a/package/6to4/files/6to4.sh b/package/6to4/files/6to4.sh
index f7f48e5..a4ec918 100755
--- a/package/6to4/files/6to4.sh
+++ b/package/6to4/files/6to4.sh
@@ -1,5 +1,12 @@
+#!/bin/sh
 # 6to4.sh - IPv6-in-IPv4 tunnel backend
-# Copyright (c) 2010-2011 OpenWrt.org
+# Copyright (c) 2010-2012 OpenWrt.org
+
+[ -n "$INCLUDE_ONLY" ] || {
+	. /etc/functions.sh
+	. ../netifd-proto.sh
+	init_proto "$@"
+}
 
 find_6to4_wanif() {
 	local if=$(ip -4 r l e 0.0.0.0/0); if="${if#default* dev }"; if="${if%% *}"
@@ -96,178 +103,137 @@ set_6to4_radvd_prefix() {
 	}
 }
 
+tun_error() {
+	local cfg="$1"; shift;
 
-# Hook into scan_interfaces() to synthesize a .device option
-# This is needed for /sbin/ifup to properly dispatch control
-# to setup_interface_6to4() even if no .ifname is set in
-# the configuration.
-scan_6to4() {
-	config_set "$1" device "6to4-$1"
-}
-
-coldplug_interface_6to4() {
-	setup_interface_6to4 "6to4-$1" "$1"
+	[ -n "$1" ] && proto_notify_error "$cfg" "$@"
+	proto_block_restart "$cfg"
 }
 
-setup_interface_6to4() {
-	local iface="$1"
-	local cfg="$2"
+proto_6to4_setup() {
+	local cfg="$1"
+	local iface="$2"
 	local link="6to4-$cfg"
 
-	local local4=$(uci_get network "$cfg" ipaddr)
-
-	local mtu
-	config_get mtu "$cfg" mtu
-
-	local ttl
-	config_get ttl "$cfg" ttl
-
-	local metric
-	config_get metric "$cfg" metric
+	json_get_var mtu mtu
+	json_get_var ttl ttl
+	json_get_var local4 ipaddr
 
-	local defaultroute
-	config_get_bool defaultroute "$cfg" defaultroute 1
+	json_get_var adv_subnet adv_subnet
+	json_get_var adv_interface adv_interface
+	json_get_var adv_valid_lifetime adv_valid_lifetime
+	json_get_var adv_preferred_lifetime adv_preferred_lifetime
 
 	local wanif=$(find_6to4_wanif)
 	[ -z "$wanif" ] && {
-		logger -t "$link" "Cannot find wan interface - aborting"
+		tun_error "NO_WAN_LINK"
 		return
 	}
 
-	local wancfg=$(find_config "$wanif")
+	. /lib/network/config.sh
+	local wancfg="$(find_config "$wanif")"
 	[ -z "$wancfg" ] && {
-		logger -t "$link" "Cannot find wan network - aborting"
+		tun_error "NO_WAN_LINK"
 		return
 	}
 
 	# If local4 is unset, guess local IPv4 address from the
 	# interface used by the default route.
 	[ -z "$local4" ] && {
-		[ -n "$wanif" ] && {
-			local4=$(find_6to4_wanip "$wanif")
-			uci_set_state network "$cfg" wan_device "$wanif"
-		}
+		[ -n "$wanif" ] && local4=$(find_6to4_wanip "$wanif")
 	}
 
-	test_6to4_rfc1918 "$local4" && {
-		logger -t "$link" "Local wan ip $local4 is private - aborting"
+	[ -z "$local4" ] && {
+		tun_error "NO_WAN_LINK"
 		return
 	}
 
-	[ -n "$local4" ] && {
-		logger -t "$link" "Starting ..."
-
-		# creating the tunnel below will trigger a net subsystem event
-		# prevent it from touching or iface by disabling .auto here
-		uci_set_state network "$cfg" ifname $link
-		uci_set_state network "$cfg" auto 0
-
-		# find our local prefix
-		local prefix6=$(find_6to4_prefix "$local4")
-		local local6="$prefix6::1/16"
-
-		logger -t "$link" " * IPv4 address is $local4"
-		logger -t "$link" " * IPv6 address is $local6"
-		ip tunnel add $link mode sit remote any local $local4 ttl ${ttl:-64}
-		ip link set $link up
-		ip link set mtu ${mtu:-1280} dev $link
-		ip addr add $local6 dev $link
-
-		uci_set_state network "$cfg" ipaddr $local4
-		uci_set_state network "$cfg" ip6addr $local6
-
-		[ "$defaultroute" = 1 ] && {
-			logger -t "$link" " * Adding default route"
-			ip -6 route add ::/0 via ::192.88.99.1 metric ${metric:-1} dev $link
-			uci_set_state network "$cfg" defaultroute 1
-		}
+	test_6to4_rfc1918 "$local4" && {
+		tun_error "INVALID_LOCAL_ADDRESS"
+		return
+	}
 
-		[ -f /etc/config/radvd ] && /etc/init.d/radvd enabled && {
-			local sid="6to4_$cfg"
+	# find our local prefix
+	local prefix6=$(find_6to4_prefix "$local4")
+	local local6="$prefix6::1"
 
-			uci_revert_state radvd
-			config_load radvd
+	proto_init_update "$link" 1
+	proto_add_ipv6_address "$local6" 16
+	proto_add_ipv6_route "::" 0
 
-			# find delegation target
-			local adv_interface
-			config_get adv_interface "$cfg" adv_interface
+	proto_add_tunnel
+	json_add_string mode sit
+	json_add_int mtu "${mtu:-1280}"
+	json_add_int ttl "${ttl:-64}"
+	json_add_string local "$local4"
+	json_add_string remote "192.88.99.1"
+	proto_close_tunnel
 
-			local adv_subnet=$(uci_get network "$cfg" adv_subnet)
-			      adv_subnet=$((0x${adv_subnet:-1}))
+	proto_send_update "$cfg"
 
-			local adv_subnets=""
+	[ -f /etc/config/radvd ] && /etc/init.d/radvd enabled && {
+		local sid="6to4_$cfg"
 
-			for adv_interface in ${adv_interface:-lan}; do
-				local adv_ifname
-				config_get adv_ifname "${adv_interface:-lan}" ifname
+		uci_revert_state radvd
+		config_load radvd
 
-				grep -qs "^ *$adv_ifname:" /proc/net/dev && {
-					local adv_valid_lifetime adv_preferred_lifetime
-					config_get adv_valid_lifetime     "$cfg" adv_valid_lifetime
-					config_get adv_preferred_lifetime "$cfg" adv_preferred_lifetime
+		adv_subnet=$((0x${adv_subnet:-1}))
 
-					local subnet6="$(printf "%s:%x::1/64" "$prefix6" $adv_subnet)"
+		local adv_subnets=""
 
-					logger -t "$link" " * Advertising IPv6 subnet $subnet6 on ${adv_interface:-lan} ($adv_ifname)"
-					ip -6 addr add $subnet6 dev $adv_ifname
+		for adv_interface in ${adv_interface:-lan}; do
+			local adv_ifname
+			config_get adv_ifname "${adv_interface:-lan}" ifname
 
-					set_6to4_radvd_interface "$sid" "$adv_interface" "$mtu"
-					set_6to4_radvd_prefix    "$sid" "$adv_interface" \
-						"$wancfg" "$(printf "0:0:0:%x::/64" $adv_subnet)" \
-						"$adv_valid_lifetime" "$adv_preferred_lifetime"
+			grep -qs "^ *$adv_ifname:" /proc/net/dev && {
+				local subnet6="$(printf "%s:%x::1/64" "$prefix6" $adv_subnet)"
 
-					adv_subnets="${adv_subnets:+$adv_subnets }$adv_ifname:$subnet6"
-					adv_subnet=$(($adv_subnet + 1))
-				}
-			done
+				logger -t "$link" " * Advertising IPv6 subnet $subnet6 on ${adv_interface:-lan} ($adv_ifname)"
+				ip -6 addr add $subnet6 dev $adv_ifname
 
-			uci_set_state network "$cfg" adv_subnets "$adv_subnets"
+				set_6to4_radvd_interface "$sid" "$adv_interface" "$mtu"
+				set_6to4_radvd_prefix    "$sid" "$adv_interface" \
+					"$wancfg" "$(printf "0:0:0:%x::/64" $adv_subnet)" \
+					"$adv_valid_lifetime" "$adv_preferred_lifetime"
 
-			/etc/init.d/radvd restart
-		}
+				adv_subnets="${adv_subnets:+$adv_subnets }$adv_ifname:$subnet6"
+				adv_subnet=$(($adv_subnet + 1))
+			}
+		done
 
-		logger -t "$link" "... started"
+		uci_set_state network "$cfg" adv_subnets "$adv_subnets"
 
-		env -i ACTION="ifup" INTERFACE="$cfg" DEVICE="$link" PROTO=6to4 /sbin/hotplug-call "iface" &
-	} || {
-		echo "Cannot determine local IPv4 address for 6to4 tunnel $cfg - skipping"
+		/etc/init.d/radvd restart
 	}
 }
 
-stop_interface_6to4() {
+proto_6to4_teardown() {
 	local cfg="$1"
 	local link="6to4-$cfg"
 
-	local local6=$(uci_get_state network "$cfg" ip6addr)
-	local defaultroute=$(uci_get_state network "$cfg" defaultroute)
-
 	local adv_subnets=$(uci_get_state network "$cfg" adv_subnets)
 
 	grep -qs "^ *$link:" /proc/net/dev && {
-		logger -t "$link" "Shutting down ..."
-		env -i ACTION="ifdown" INTERFACE="$cfg" DEVICE="$link" PROTO=6to4 /sbin/hotplug-call "iface" &
-
 		[ -n "$adv_subnets" ] && {
 			uci_revert_state radvd
 			/etc/init.d/radvd enabled && /etc/init.d/radvd restart
-
-			local adv_subnet
-			for adv_subnet in $adv_subnets; do
-				local ifname="${adv_subnet%%:*}"
-				local subnet="${adv_subnet#*:}"
-
-				logger -t "$link" " * Removing IPv6 subnet $subnet from interface $ifname"
-				ip -6 addr del $subnet dev $ifname
-			done
 		}
+	}
+}
 
-		[ "$defaultroute" = "1" ] && \
-			ip -6 route del ::/0 via ::192.88.99.1 dev $link
-
-		ip addr del $local6 dev $link
-		ip link set $link down
-		ip tunnel del $link
+proto_6to4_init_config() {
+	no_device=1             
+	available=1
+
+	proto_config_add_string "ipaddr"
+	proto_config_add_int "mtu"
+	proto_config_add_int "ttl"
+	proto_config_add_string "adv_interface"
+	proto_config_add_string "adv_subnet"
+	proto_config_add_int "adv_valid_lifetime"
+	proto_config_add_int "adv_preferred_lifetime"
+}
 
-		logger -t "$link" "... stopped"
-	}
+[ -n "$INCLUDE_ONLY" ] || {
+	add_protocol 6to4
 }