firmware: add IPQ fritz-tools FW extraction tool

Adds tools to access tffs3 and pre-calibration data required for ipq4019
based FritBoxes.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

5 files changed, 726 insertions, 0 deletions

diff --git a/package/firmware/fritz-tools/Makefile b/package/firmware/fritz-tools/Makefile
new file mode 100644
index 0000000..4891dca
--- /dev/null
+++ b/package/firmware/fritz-tools/Makefile
@@ -0,0 +1,30 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=fritz-tools
+PKG_RELEASE:=1
+CMAKE_INSTALL:=1
+PKG_FLAGS:=nonshared
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/cmake.mk
+
+define Package/fritz-tools
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  DEPENDS:=@TARGET_ipq806x +zlib
+  TITLE:=Utilites for accessing AVM Calibration data and TFFS
+endef
+
+define Package/fritz-tools/description
+ This package contains:
+ fritz_cal_extract.c: tool to extract WLAN calibration data.
+ fritz_tffs_read.c: partially read the TFFS filesystems.
+endef
+
+define Package/fritz-tools/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/fritz_cal_extract $(1)/usr/bin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/fritz_tffs_read $(1)/usr/bin/
+endef
+
+$(eval $(call BuildPackage,fritz-tools))
diff --git a/package/firmware/fritz-tools/README.md b/package/firmware/fritz-tools/README.md
new file mode 100644
index 0000000..def237b
--- /dev/null
+++ b/package/firmware/fritz-tools/README.md
@@ -0,0 +1,50 @@
+Userspace utilties for accessing TFFS (a name-value storage usually found in AVM Fritz!Box based devices)
+
+## Building
+
+```
+mkdir build
+cd build
+cmake /path/to/fritz_tffs_tools
+make
+```
+
+## Usage
+
+All command line parameters are documented:
+```
+fritz_tffs_read -h
+```
+
+Show all entries from a TFFS partition dump  (in the format: name=value):
+```
+fritz_tffs_read -i /path/to/tffs.dump -a
+```
+
+Read a TFFS partition and show all entries (in the format: name=value):
+```
+fritz_tffs_read -i /dev/mtdX -a
+```
+
+Output only the value of a specific key (this will only show the value):
+```
+fritz_tffs_read -i /dev/mtdX -n my_ipaddress
+```
+
+## LICENSE
+
+See `LICENSE`:
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License along
+    with this program; if not, write to the Free Software Foundation, Inc.,
+    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
diff --git a/package/firmware/fritz-tools/src/CMakeLists.txt b/package/firmware/fritz-tools/src/CMakeLists.txt
new file mode 100644
index 0000000..116bca9
--- /dev/null
+++ b/package/firmware/fritz-tools/src/CMakeLists.txt
@@ -0,0 +1,12 @@
+cmake_minimum_required(VERSION 2.6)
+
+PROJECT(fritz-tools C)
+ADD_DEFINITIONS(-Wall -Werror --std=gnu99 -Wmissing-declarations)
+
+SET(CMAKE_SHARED_LIBRARY_LINK_C_FLAGS "")
+
+ADD_EXECUTABLE(fritz_tffs_read fritz_tffs_read.c)
+ADD_EXECUTABLE(fritz_cal_extract fritz_cal_extract.c)
+TARGET_LINK_LIBRARIES(fritz_cal_extract z)
+
+INSTALL(TARGETS fritz_tffs_read fritz_cal_extract RUNTIME DESTINATION bin)
diff --git a/package/firmware/fritz-tools/src/fritz_cal_extract.c b/package/firmware/fritz-tools/src/fritz_cal_extract.c
new file mode 100644
index 0000000..8156dfd
--- /dev/null
+++ b/package/firmware/fritz-tools/src/fritz_cal_extract.c
@@ -0,0 +1,259 @@
+/*
+ * A tool for reading the zlib compressed calibration data
+ * found in AVM Fritz!Box based devices).
+ *
+ * Copyright (c) 2017 Christian Lamparter <chunkeey@googlemail.com>
+ *
+ * Based on zpipe, which is an example of proper use of zlib's inflate().
+ * that is Not copyrighted -- provided to the public domain
+ * Version 1.4  11 December 2005  Mark Adler
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <assert.h>
+#include <unistd.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <endian.h>
+#include <errno.h>
+#include "zlib.h"
+
+#define CHUNK 1024
+
+static inline size_t special_min(size_t a, size_t b)
+{
+	return a == 0 ? b : (a < b ? a : b);
+}
+
+/* Decompress from file source to file dest until stream ends or EOF.
+   inf() returns Z_OK on success, Z_MEM_ERROR if memory could not be
+   allocated for processing, Z_DATA_ERROR if the deflate data is
+   invalid or incomplete, Z_VERSION_ERROR if the version of zlib.h and
+   the version of the library linked do not match, or Z_ERRNO if there
+   is an error reading or writing the files. */
+static int inf(FILE *source, FILE *dest, size_t limit, size_t skip)
+{
+    int ret;
+    size_t have;
+    z_stream strm;
+    unsigned char in[CHUNK];
+    unsigned char out[CHUNK];
+
+    /* allocate inflate state */
+    strm.zalloc = Z_NULL;
+    strm.zfree = Z_NULL;
+    strm.opaque = Z_NULL;
+    strm.avail_in = 0;
+    strm.next_in = Z_NULL;
+    ret = inflateInit(&strm);
+    if (ret != Z_OK)
+        return ret;
+
+    /* decompress until deflate stream ends or end of file */
+    do {
+        strm.avail_in = fread(in, 1, CHUNK, source);
+        if (ferror(source)) {
+            (void)inflateEnd(&strm);
+            return Z_ERRNO;
+        }
+        if (strm.avail_in == 0)
+            break;
+        strm.next_in = in;
+
+        /* run inflate() on input until output buffer not full */
+        do {
+            strm.avail_out = CHUNK;
+            strm.next_out = out;
+            ret = inflate(&strm, Z_NO_FLUSH);
+            assert(ret != Z_STREAM_ERROR);  /* state not clobbered */
+            switch (ret) {
+            case Z_NEED_DICT:
+                ret = Z_DATA_ERROR;     /* and fall through */
+            case Z_DATA_ERROR:
+            case Z_MEM_ERROR:
+                (void)inflateEnd(&strm);
+                return ret;
+            }
+            have = special_min(limit, CHUNK - strm.avail_out) - skip;
+            if (fwrite(&out[skip], have, 1, dest) != 1 || ferror(dest)) {
+                (void)inflateEnd(&strm);
+                return Z_ERRNO;
+            }
+	    skip = 0;
+	    limit -= have;
+        } while (strm.avail_out == 0 && limit > 0);
+
+        /* done when inflate() says it's done */
+    } while (ret != Z_STREAM_END && limit > 0);
+
+    /* clean up and return */
+    (void)inflateEnd(&strm);
+    return (limit == 0 ? Z_OK : (ret == Z_STREAM_END ? Z_OK : Z_DATA_ERROR));
+}
+
+/* report a zlib or i/o error */
+static void zerr(int ret)
+{
+    switch (ret) {
+    case Z_ERRNO:
+        if (ferror(stdin))
+            fputs("error reading stdin\n", stderr);
+        if (ferror(stdout))
+            fputs("error writing stdout\n", stderr);
+        break;
+    case Z_STREAM_ERROR:
+        fputs("invalid compression level\n", stderr);
+        break;
+    case Z_DATA_ERROR:
+        fputs("invalid or incomplete deflate data\n", stderr);
+        break;
+    case Z_MEM_ERROR:
+        fputs("out of memory\n", stderr);
+        break;
+    case Z_VERSION_ERROR:
+        fputs("zlib version mismatch!\n", stderr);
+    }
+}
+
+static unsigned int get_num(char *str)
+{
+	if (!strncmp("0x", str, 2))
+		return strtoul(str+2, NULL, 16);
+	else
+		return strtoul(str, NULL, 10);
+}
+
+static void usage(void)
+{
+	fprintf(stderr, "Usage: fritz_cal_extract [-s seek offset] [-i skip] [-o output file] [-l limit] [infile] -e entry_id\n"
+			"Finds and extracts zlib compressed calibration data in the EVA loader\n");
+	exit(EXIT_FAILURE);
+}
+
+struct cal_entry {
+	uint16_t id;
+	uint16_t len;
+} __attribute__((packed));
+
+/* compress or decompress from stdin to stdout */
+int main(int argc, char **argv)
+{
+	struct cal_entry cal = { .len = 0 };
+	FILE *in = stdin;
+	FILE *out = stdout;
+	size_t limit = 0, skip = 0;
+	int initial_offset = 0;
+	int entry = -1;
+	int ret;
+	int opt;
+
+	while ((opt = getopt(argc, argv, "s:e:o:l:i:")) != -1) {
+		switch (opt) {
+		case 's':
+			initial_offset = (int)get_num(optarg);
+			if (errno) {
+				perror("Failed to parse seek offset");
+				goto out_bad;
+			}
+			break;
+		case 'e':
+			entry = (int) htobe16(get_num(optarg));
+			if (errno) {
+				perror("Failed to entry id");
+				goto out_bad;
+			}
+			break;
+		case 'o':
+			out = fopen(optarg, "w");
+			if (!out) {
+				perror("Failed to create output file");
+				goto out_bad;
+			}
+			break;
+		case 'l':
+			limit = (size_t)get_num(optarg);
+			if (errno) {
+				perror("Failed to parse limit");
+				goto out_bad;
+			}
+			break;
+		case 'i':
+			skip = (size_t)get_num(optarg);
+			if (errno) {
+				perror("Failed to parse skip");
+				goto out_bad;
+			}
+			break;
+		default: /* '?' */
+			usage();
+		}
+	}
+
+	if (entry == -1)
+		usage();
+
+	if (argc > 1 && optind <= argc) {
+		in = fopen(argv[optind], "r");
+		if (!in) {
+			perror("Failed to create output file");
+			goto out_bad;
+		}
+	}
+
+	if (initial_offset) {
+		ret = fseek(in, initial_offset, SEEK_CUR);
+		if (ret) {
+			perror("Failed to seek to calibration table");
+			goto out_bad;
+		}
+	}
+
+	do {
+		ret = fseek(in, be16toh(cal.len), SEEK_CUR);
+		if (feof(in)) {
+			fprintf(stderr, "Reached end of file, but didn't find the matching entry\n");
+			goto out_bad;
+		} else if (ferror(in)) {
+			perror("Failure during seek");
+			goto out_bad;
+		}
+
+		ret = fread(&cal, 1, sizeof cal, in);
+		if (ret != sizeof cal)
+			goto out_bad;
+	} while (entry != cal.id || cal.id == 0xffff);
+
+	if (cal.id == 0xffff) {
+		fprintf(stderr, "Reached end of filesystem, but didn't find the matching entry\n");
+		goto out_bad;
+	}
+
+	ret = inf(in, out, limit, skip);
+	if (ret == Z_OK)
+		goto out;
+
+	zerr(ret);
+
+out_bad:
+	ret = EXIT_FAILURE;
+
+out:
+	fclose(in);
+	fclose(out);
+	return ret;
+}
diff --git a/package/firmware/fritz-tools/src/fritz_tffs_read.c b/package/firmware/fritz-tools/src/fritz_tffs_read.c
new file mode 100644
index 0000000..f367e02
--- /dev/null
+++ b/package/firmware/fritz-tools/src/fritz_tffs_read.c
@@ -0,0 +1,375 @@
+/*
+ * A tool for reading the TFFS partitions (a name-value storage usually
+ * found in AVM Fritz!Box based devices).
+ *
+ * Copyright (c) 2015-2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ *
+ * Based on the TFFS 2.0 kernel driver from AVM:
+ *     Copyright (c) 2004-2007 AVM GmbH <fritzbox_info@avm.de>
+ * and the OpenWrt TFFS kernel driver:
+ *     Copyright (c) 2013 John Crispin <blogic@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <string.h>
+#include <libgen.h>
+#include <getopt.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <arpa/inet.h>
+
+#define DEFAULT_TFFS_SIZE	(256 * 1024)
+
+#define TFFS_ID_END		0xffff
+#define TFFS_ID_TABLE_NAME	0x01ff
+
+static char *progname;
+static char *input_file;
+static unsigned long tffs_size = DEFAULT_TFFS_SIZE;
+static char *name_filter = NULL;
+static bool show_all = false;
+static bool print_all_key_names = false;
+static bool swap_bytes = false;
+
+struct tffs_entry_header {
+	uint16_t id;
+	uint16_t len;
+};
+
+struct tffs_entry {
+	const struct tffs_entry_header *header;
+	char *name;
+	uint8_t *val;
+};
+
+struct tffs_name_table_entry {
+	const uint32_t *id;
+	const char *val;
+};
+
+struct tffs_key_name_table {
+	uint32_t size;
+	struct tffs_name_table_entry *entries;
+};
+
+static inline uint16_t get_header_len(const struct tffs_entry_header *header)
+{
+	if (swap_bytes)
+		return ntohs(header->len);
+
+	return header->len;
+}
+
+static inline uint16_t get_header_id(const struct tffs_entry_header *header)
+{
+	if (swap_bytes)
+		return ntohs(header->id);
+
+	return header->id;
+}
+
+static inline uint16_t to_entry_header_id(uint32_t name_id)
+{
+	if (swap_bytes)
+		return ntohl(name_id) & 0xffff;
+
+	return name_id & 0xffff;
+}
+
+static inline uint32_t get_walk_size(uint32_t entry_len)
+{
+	return (entry_len + 3) & ~0x03;
+}
+
+static void print_entry_value(const struct tffs_entry *entry)
+{
+	int i;
+
+	/* These are NOT NULL terminated. */
+	for (i = 0; i < get_header_len(entry->header); i++)
+		fprintf(stdout, "%c", entry->val[i]);
+}
+
+static void parse_entry(uint8_t *buffer, uint32_t pos,
+			struct tffs_entry *entry)
+{
+	entry->header = (struct tffs_entry_header *) &buffer[pos];
+	entry->val = &buffer[pos + sizeof(struct tffs_entry_header)];
+}
+
+static int find_entry(uint8_t *buffer, uint16_t id, struct tffs_entry *entry)
+{
+	uint32_t pos = 0;
+
+	do {
+		parse_entry(buffer, pos, entry);
+
+		if (get_header_id(entry->header) == id)
+			return 1;
+
+		pos += sizeof(struct tffs_entry_header);
+		pos += get_walk_size(get_header_len(entry->header));
+	} while (pos < tffs_size && entry->header->id != TFFS_ID_END);
+
+	return 0;
+}
+
+static void parse_key_names(struct tffs_entry *names_entry,
+			    struct tffs_key_name_table *key_names)
+{
+	uint32_t pos = 0, i = 0;
+	struct tffs_name_table_entry *name_item;
+
+	key_names->entries = calloc(sizeof(*name_item), 1);
+
+	do {
+		name_item = &key_names->entries[i];
+
+		name_item->id = (uint32_t *) &names_entry->val[pos];
+		pos += sizeof(*name_item->id);
+		name_item->val = (const char *) &names_entry->val[pos];
+
+		/*
+		 * There is no "length" field because the string values are
+		 * simply NULL-terminated -> strlen() gives us the size.
+		 */
+		pos += get_walk_size(strlen(name_item->val) + 1);
+
+		++i;
+		key_names->entries = realloc(key_names->entries,
+						sizeof(*name_item) * (i + 1));
+	} while (pos < get_header_len(names_entry->header));
+
+	key_names->size = i;
+}
+
+static void show_all_key_names(struct tffs_key_name_table *key_names)
+{
+	int i;
+
+	for (i = 0; i < key_names->size; i++)
+		printf("%s\n", key_names->entries[i].val);
+}
+
+static int show_all_key_value_pairs(uint8_t *buffer,
+				    struct tffs_key_name_table *key_names)
+{
+	int i, has_value = 0;
+	uint16_t id;
+	struct tffs_entry tmp;
+
+	for (i = 0; i < key_names->size; i++) {
+		id = to_entry_header_id(*key_names->entries[i].id);
+
+		if (find_entry(buffer, id, &tmp)) {
+			printf("%s=", key_names->entries[i].val);
+			print_entry_value(&tmp);
+			printf("\n");
+			has_value++;
+		}
+	}
+
+	if (!has_value) {
+		fprintf(stderr, "ERROR: no values found!\n");
+		return EXIT_FAILURE;
+	}
+
+	return EXIT_SUCCESS;
+}
+
+static int show_matching_key_value(uint8_t *buffer,
+				   struct tffs_key_name_table *key_names)
+{
+	int i;
+	uint16_t id;
+	struct tffs_entry tmp;
+	const char *name;
+
+	for (i = 0; i < key_names->size; i++) {
+		name = key_names->entries[i].val;
+
+		if (strncmp(name, name_filter, strlen(name)) == 0) {
+			id = to_entry_header_id(*key_names->entries[i].id);
+
+			if (find_entry(buffer, id, &tmp)) {
+				print_entry_value(&tmp);
+				printf("\n");
+				return EXIT_SUCCESS;
+			} else {
+				fprintf(stderr,
+					"ERROR: no value found for name %s!\n",
+					name);
+				return EXIT_FAILURE;
+			}
+		}
+	}
+
+	fprintf(stderr, "ERROR: Unknown key name %s!\n", name_filter);
+	return EXIT_FAILURE;
+}
+
+static void usage(int status)
+{
+	FILE *stream = (status != EXIT_SUCCESS) ? stderr : stdout;
+
+	fprintf(stream, "Usage: %s [OPTIONS...]\n", progname);
+	fprintf(stream,
+	"\n"
+	"Options:\n"
+	"  -a              list all key value pairs found in the TFFS file/device\n"
+	"  -b              swap bytes while parsing the TFFS file/device\n"
+	"  -h              show this screen\n"
+	"  -i <file>       inspect the given TFFS file/device <file>\n"
+	"  -l              list all supported keys\n"
+	"  -n <key name>   display the value of the given key\n"
+	"  -s <size>       the (max) size of the TFFS file/device <size>\n"
+	);
+
+	exit(status);
+}
+
+static int file_exist(char *filename)
+{
+	struct stat buffer;
+
+	return stat(filename, &buffer) == 0;
+}
+
+static void parse_options(int argc, char *argv[])
+{
+	while (1)
+	{
+		int c;
+
+		c = getopt(argc, argv, "abhi:ln:s");
+		if (c == -1)
+			break;
+
+		switch (c) {
+			case 'a':
+				show_all = true;
+				name_filter = NULL;
+				print_all_key_names = false;
+				break;
+			case 'b':
+				swap_bytes = 1;
+				break;
+			case 'h':
+				usage(EXIT_SUCCESS);
+				break;
+			case 'i':
+				input_file = optarg;
+				break;
+			case 'l':
+				print_all_key_names = true;
+				show_all = false;
+				name_filter = NULL;
+				break;
+			case 'n':
+				name_filter = optarg;
+				show_all = false;
+				print_all_key_names = false;
+				break;
+			case 's':
+				tffs_size = strtoul(optarg, NULL, 0);
+				break;
+			default:
+				usage(EXIT_FAILURE);
+				break;
+		}
+	}
+
+	if (!input_file) {
+		fprintf(stderr, "ERROR: No input file (-i <file>) given!\n");
+		exit(EXIT_FAILURE);
+	}
+
+	if (!file_exist(input_file)) {
+		fprintf(stderr, "ERROR: %s does not exist\n", input_file);
+		exit(EXIT_FAILURE);
+	}
+
+	if (!show_all && !name_filter && !print_all_key_names) {
+		fprintf(stderr,
+			"ERROR: either -l, -a or -n <key name> is required!\n");
+		exit(EXIT_FAILURE);
+	}
+}
+
+int main(int argc, char *argv[])
+{
+	int ret = EXIT_FAILURE;
+	uint8_t *buffer;
+	FILE *fp;
+	struct tffs_entry name_table;
+	struct tffs_key_name_table key_names;
+
+	progname = basename(argv[0]);
+
+	parse_options(argc, argv);
+
+	fp = fopen(input_file, "r");
+
+	if (!fp) {
+		fprintf(stderr, "ERROR: Failed to open tffs input file %s\n",
+			input_file);
+		goto out;
+	}
+
+	buffer = malloc(tffs_size);
+
+	if (fread(buffer, 1, tffs_size, fp) != tffs_size) {
+		fprintf(stderr, "ERROR: Failed read tffs file %s\n",
+			input_file);
+		goto out_free;
+	}
+
+	if (!find_entry(buffer, TFFS_ID_TABLE_NAME, &name_table)) {
+		fprintf(stderr,"ERROR: No name table found in tffs file %s\n",
+			input_file);
+		fprintf(stderr,"       Is byte-swapping (-b) required?\n");
+		goto out_free;
+	}
+
+	parse_key_names(&name_table, &key_names);
+	if (key_names.size < 1) {
+		fprintf(stderr, "ERROR: No name table found in tffs file %s\n",
+			input_file);
+		goto out_free_names;
+	}
+
+	if (print_all_key_names) {
+		show_all_key_names(&key_names);
+		ret = EXIT_SUCCESS;
+	} else if (show_all) {
+		ret = show_all_key_value_pairs(buffer, &key_names);
+	} else {
+		ret = show_matching_key_value(buffer, &key_names);
+	}
+
+out_free_names:
+	free(key_names.entries);
+out_free:
+	fclose(fp);
+	free(buffer);
+out:
+	return ret;
+}