add patches for 2.6.30, remove config-default

SVN-Revision: 15743

9 files changed, 42 insertions, 498 deletions

diff --git a/target/linux/etrax/config-2.6.29 b/target/linux/etrax/config-2.6.29
deleted file mode 100644
index a902188..0000000
--- a/target/linux/etrax/config-2.6.29
+++ /dev/null
@@ -1,132 +0,0 @@
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_BASE_SMALL=0
-CONFIG_BITREVERSE=y
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BOUNCE=y
-# CONFIG_BRIDGE is not set
-# CONFIG_CFG80211 is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_CRIS=y
-# CONFIG_CRIS_MACH_ARTPEC3 is not set
-# CONFIG_DCB is not set
-CONFIG_DEFAULT_VEGAS=y
-# CONFIG_DEFAULT_WESTWOOD is not set
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-# CONFIG_ETRAX100LX is not set
-CONFIG_ETRAX100LX_V2=y
-# CONFIG_ETRAXFS is not set
-CONFIG_ETRAX_ARCH_V10=y
-# CONFIG_ETRAX_ARCH_V32 is not set
-CONFIG_ETRAX_AXISFLASHMAP=y
-CONFIG_ETRAX_CMDLINE="root=/dev/mtdblock1 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200"
-# CONFIG_ETRAX_CSP0_LEDS is not set
-# CONFIG_ETRAX_DEBUG_PORT0 is not set
-# CONFIG_ETRAX_DEBUG_PORT1 is not set
-# CONFIG_ETRAX_DEBUG_PORT2 is not set
-# CONFIG_ETRAX_DEBUG_PORT3 is not set
-CONFIG_ETRAX_DEBUG_PORT_NULL=y
-CONFIG_ETRAX_DEF_R_BUS_CONFIG=0x4
-CONFIG_ETRAX_DEF_R_PORT_PA_DATA=0xf0
-CONFIG_ETRAX_DEF_R_PORT_PA_DIR=0x1c
-CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG=0x00
-CONFIG_ETRAX_DEF_R_PORT_PB_DATA=0x03
-CONFIG_ETRAX_DEF_R_PORT_PB_DIR=0xce
-CONFIG_ETRAX_DEF_R_SDRAM_CONFIG=0x09603737
-CONFIG_ETRAX_DEF_R_SDRAM_TIMING=0x80008002
-CONFIG_ETRAX_DEF_R_WAITSTATES=0x95f8
-CONFIG_ETRAX_DRAM_SIZE=32
-CONFIG_ETRAX_DRAM_VIRTUAL_BASE=c0000000
-CONFIG_ETRAX_ETHERNET=y
-CONFIG_ETRAX_FAST_TIMER=y
-CONFIG_ETRAX_FLASH1_SIZE=0
-CONFIG_ETRAX_FLASH_BUSWIDTH=2
-CONFIG_ETRAX_GPIO=y
-# CONFIG_ETRAX_I2C is not set
-# CONFIG_ETRAX_I2C_GVC is not set
-# CONFIG_ETRAX_KMALLOCED_MODULES is not set
-CONFIG_ETRAX_LED1G=2
-CONFIG_ETRAX_LED1R=2
-CONFIG_ETRAX_LED2G=3
-CONFIG_ETRAX_LED2R=3
-CONFIG_ETRAX_LED3G=2
-CONFIG_ETRAX_LED3R=2
-CONFIG_ETRAX_NANDFLASH_BUSWIDTH=1
-CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y
-# CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set
-# CONFIG_ETRAX_NO_LEDS is not set
-CONFIG_ETRAX_PA_BUTTON_BITMASK=02
-CONFIG_ETRAX_PA_CHANGEABLE_BITS=0xFF
-CONFIG_ETRAX_PA_CHANGEABLE_DIR=0xFF
-CONFIG_ETRAX_PA_LEDS=y
-CONFIG_ETRAX_PB_CHANGEABLE_BITS=0xFF
-CONFIG_ETRAX_PB_CHANGEABLE_DIR=0xFF
-# CONFIG_ETRAX_PB_LEDS is not set
-CONFIG_ETRAX_PTABLE_SECTOR=0
-CONFIG_ETRAX_RESCUE_SER0=y
-# CONFIG_ETRAX_RESCUE_SER1 is not set
-# CONFIG_ETRAX_RESCUE_SER2 is not set
-# CONFIG_ETRAX_RESCUE_SER3 is not set
-CONFIG_ETRAX_SDRAM=y
-# CONFIG_ETRAX_SERIAL is not set
-# CONFIG_ETRAX_SOFT_SHUTDOWN is not set
-# CONFIG_ETRAX_SYNCHRONOUS_SERIAL is not set
-CONFIG_ETRAX_USB_HOST=y
-CONFIG_ETRAX_USB_HOST_PORT1=y
-CONFIG_ETRAX_USB_HOST_PORT2=y
-# CONFIG_ETRAX_VCS_SIM is not set
-# CONFIG_ETRAX_WATCHDOG is not set
-CONFIG_EXT2_FS=y
-CONFIG_FORCE_MAX_ZONEORDER=6
-# CONFIG_FREEZER is not set
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_IOMAP=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_I2C is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_MTDRAM_ABS_POS=0x0
-CONFIG_MTDRAM_ERASE_SIZE=128
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_MTDRAM=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NET_SCH_DRR is not set
-# CONFIG_NF_DEFRAG_IPV4 is not set
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NO_IOPORT=y
-# CONFIG_OOM_REBOOT is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_RTC is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-# CONFIG_SVINTO_SIM is not set
-# CONFIG_SYSTEM_PROFILER is not set
-CONFIG_UID16=y
-CONFIG_USB=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WLAN_80211 is not set
diff --git a/target/linux/etrax/config-default b/target/linux/etrax/config-2.6.30
index fc68fec..6bff760 100644
--- a/target/linux/etrax/config-default
+++ b/target/linux/etrax/config-2.6.30
@@ -1,19 +1,17 @@
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_BINARY_PRINTF is not set
 CONFIG_BITREVERSE=y
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_BOUNCE=y
-CONFIG_CLASSIC_RCU=y
+# CONFIG_BRIDGE is not set
+# CONFIG_CFG80211 is not set
 CONFIG_CRIS=y
 # CONFIG_CRIS_MACH_ARTPEC3 is not set
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_AUTHENC=m
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO is not set
+CONFIG_DEFAULT_VEGAS=y
+# CONFIG_DEFAULT_WESTWOOD is not set
 # CONFIG_ETRAX100LX is not set
 CONFIG_ETRAX100LX_V2=y
 # CONFIG_ETRAXFS is not set
@@ -22,11 +20,11 @@ CONFIG_ETRAX_ARCH_V10=y
 CONFIG_ETRAX_AXISFLASHMAP=y
 CONFIG_ETRAX_CMDLINE="root=/dev/mtdblock1 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200"
 # CONFIG_ETRAX_CSP0_LEDS is not set
-# CONFIG_ETRAX_DEBUG_PORT0 is not set
+CONFIG_ETRAX_DEBUG_PORT0=y
 # CONFIG_ETRAX_DEBUG_PORT1 is not set
 # CONFIG_ETRAX_DEBUG_PORT2 is not set
 # CONFIG_ETRAX_DEBUG_PORT3 is not set
-CONFIG_ETRAX_DEBUG_PORT_NULL=y
+# CONFIG_ETRAX_DEBUG_PORT_NULL is not set
 CONFIG_ETRAX_DEF_R_BUS_CONFIG=0x4
 CONFIG_ETRAX_DEF_R_PORT_PA_DATA=0xf0
 CONFIG_ETRAX_DEF_R_PORT_PA_DIR=0x1c
@@ -38,22 +36,13 @@ CONFIG_ETRAX_DEF_R_SDRAM_TIMING=0x80008002
 CONFIG_ETRAX_DEF_R_WAITSTATES=0x95f8
 CONFIG_ETRAX_DRAM_SIZE=32
 CONFIG_ETRAX_DRAM_VIRTUAL_BASE=c0000000
-CONFIG_ETRAX_DS1302=y
-CONFIG_ETRAX_DS1302_RSTBIT=2
-CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT=y
-CONFIG_ETRAX_DS1302_SCLBIT=1
-CONFIG_ETRAX_DS1302_SDABIT=0
-CONFIG_ETRAX_DS1302_TRICKLE_CHARGE=0
 CONFIG_ETRAX_ETHERNET=y
 CONFIG_ETRAX_FAST_TIMER=y
 CONFIG_ETRAX_FLASH1_SIZE=0
 CONFIG_ETRAX_FLASH_BUSWIDTH=2
 CONFIG_ETRAX_GPIO=y
-CONFIG_ETRAX_I2C=y
-CONFIG_ETRAX_I2C_CLK_PORT=1
-CONFIG_ETRAX_I2C_DATA_PORT=0
-# CONFIG_ETRAX_I2C_EEPROM is not set
-CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C=y
+# CONFIG_ETRAX_I2C is not set
+# CONFIG_ETRAX_I2C_GVC is not set
 # CONFIG_ETRAX_KMALLOCED_MODULES is not set
 CONFIG_ETRAX_LED1G=2
 CONFIG_ETRAX_LED1R=2
@@ -72,14 +61,12 @@ CONFIG_ETRAX_PA_LEDS=y
 CONFIG_ETRAX_PB_CHANGEABLE_BITS=0xFF
 CONFIG_ETRAX_PB_CHANGEABLE_DIR=0xFF
 # CONFIG_ETRAX_PB_LEDS is not set
-# CONFIG_ETRAX_PCF8563 is not set
 CONFIG_ETRAX_PTABLE_SECTOR=0
 CONFIG_ETRAX_RESCUE_SER0=y
 # CONFIG_ETRAX_RESCUE_SER1 is not set
 # CONFIG_ETRAX_RESCUE_SER2 is not set
 # CONFIG_ETRAX_RESCUE_SER3 is not set
 # CONFIG_ETRAX_RS485 is not set
-CONFIG_ETRAX_RTC=y
 CONFIG_ETRAX_SDRAM=y
 CONFIG_ETRAX_SER0_CD_ON_PA_BIT=-1
 CONFIG_ETRAX_SER0_CD_ON_PB_BIT=-1
@@ -93,17 +80,17 @@ CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE=y
 # CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PB is not set
 CONFIG_ETRAX_SER0_RI_ON_PA_BIT=-1
 CONFIG_ETRAX_SER0_RI_ON_PB_BIT=-1
-CONFIG_ETRAX_SER2_CD_ON_PA_BIT=7
+CONFIG_ETRAX_SER2_CD_ON_PA_BIT=-1
 CONFIG_ETRAX_SER2_CD_ON_PB_BIT=-1
-CONFIG_ETRAX_SER2_DSR_ON_PA_BIT=6
+CONFIG_ETRAX_SER2_DSR_ON_PA_BIT=-1
 CONFIG_ETRAX_SER2_DSR_ON_PB_BIT=-1
-CONFIG_ETRAX_SER2_DTR_ON_PA_BIT=4
+CONFIG_ETRAX_SER2_DTR_ON_PA_BIT=-1
 CONFIG_ETRAX_SER2_DTR_ON_PB_BIT=-1
 # CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED is not set
-# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE is not set
-CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PA=y
+CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE=y
+# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PA is not set
 # CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PB is not set
-CONFIG_ETRAX_SER2_RI_ON_PA_BIT=5
+CONFIG_ETRAX_SER2_RI_ON_PA_BIT=-1
 CONFIG_ETRAX_SER2_RI_ON_PB_BIT=-1
 CONFIG_ETRAX_SER3_CD_ON_PA_BIT=-1
 CONFIG_ETRAX_SER3_CD_ON_PB_BIT=-1
@@ -144,7 +131,7 @@ CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN=y
 # CONFIG_ETRAX_SERIAL_PORT3_DMA9_IN is not set
 # CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_IN is not set
 # CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_OUT is not set
-CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS=1
+CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS=5
 # CONFIG_ETRAX_SOFT_SHUTDOWN is not set
 # CONFIG_ETRAX_SYNCHRONOUS_SERIAL is not set
 CONFIG_ETRAX_USB_HOST=y
@@ -152,37 +139,24 @@ CONFIG_ETRAX_USB_HOST_PORT1=y
 CONFIG_ETRAX_USB_HOST_PORT2=y
 # CONFIG_ETRAX_VCS_SIM is not set
 # CONFIG_ETRAX_WATCHDOG is not set
-CONFIG_FAT_FS=y
+# CONFIG_FILE_LOCKING is not set
 CONFIG_FORCE_MAX_ZONEORDER=6
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FREEZER is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_IOMAP=y
 # CONFIG_GEN_RTC is not set
+# CONFIG_HAMRADIO is not set
 CONFIG_HAS_DMA=y
 CONFIG_HAS_IOMEM=y
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_HAVE_IDE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HOSTAP is not set
+CONFIG_HAVE_MLOCK=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_I2C is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IDE is not set
-CONFIG_IEEE80211=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_DEBUG=y
-CONFIG_IEEE80211_SOFTMAC=m
-CONFIG_IEEE80211_SOFTMAC_DEBUG=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_MSDOS_FS=y
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
 CONFIG_MTDRAM_ABS_POS=0x0
 CONFIG_MTDRAM_ERASE_SIZE=128
 CONFIG_MTDRAM_TOTAL_SIZE=0
@@ -192,15 +166,22 @@ CONFIG_MTD_CFI_ADV_OPTIONS=y
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_MTDRAM=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NF_DEFRAG_IPV4 is not set
+CONFIG_NLATTR=y
 CONFIG_NO_IOPORT=y
 # CONFIG_OOM_REBOOT is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_RTC is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250 is not set
-CONFIG_SLABINFO=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_SVINTO_SIM is not set
 # CONFIG_SYSTEM_PROFILER is not set
 CONFIG_UID16=y
@@ -208,7 +189,8 @@ CONFIG_USB=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_R8A66597_HCD is not set
 CONFIG_USB_SUPPORT=y
-CONFIG_VFAT_FS=y
 # CONFIG_VLAN_8021Q is not set
+# CONFIG_WIRELESS_EXT_SYSFS is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WLAN_80211 is not set
diff --git a/target/linux/etrax/patches-2.6.29/300-sysfs.patch b/target/linux/etrax/patches-2.6.29/300-sysfs.patch
deleted file mode 100644
index ffaec36..0000000
--- a/target/linux/etrax/patches-2.6.29/300-sysfs.patch
+++ /dev/null
@@ -1,43 +0,0 @@
---- a/drivers/serial/crisv10.c
-+++ b/drivers/serial/crisv10.c
-@@ -27,6 +27,7 @@ static char *serial_version = "$Revision
- #include <linux/kernel.h>
- #include <linux/mutex.h>
- #include <linux/bitops.h>
-+#include <linux/device.h>
- 
- #include <asm/io.h>
- #include <asm/irq.h>
-@@ -4393,6 +4394,7 @@ static const struct tty_operations rs_op
- 	.tiocmset = rs_tiocmset
- };
- 
-+static struct class *rs_class;
- static int __init
- rs_init(void)
- {
-@@ -4527,6 +4529,24 @@ rs_init(void)
- #endif
- #endif /* CONFIG_SVINTO_SIM */
- 
-+	rs_class = class_create(THIS_MODULE, "rs_tty");
-+#ifdef CONFIG_ETRAX_SERIAL_PORT0 
-+	device_create(rs_class, NULL,
-+		MKDEV(TTY_MAJOR, 64), NULL, "ttyS0");
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT1 
-+	device_create(rs_class, NULL,
-+		MKDEV(TTY_MAJOR, 65), NULL, "ttyS1");
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2 
-+	device_create(rs_class, NULL,
-+		MKDEV(TTY_MAJOR, 66), NULL, "ttyS2");
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT3 
-+	device_create(rs_class, NULL,
-+		MKDEV(TTY_MAJOR, 67), NULL, "ttyS3");
-+#endif
-+
- 	return 0;
- }
- 
diff --git a/target/linux/etrax/patches-2.6.29/600-fix_serial_cris.patch b/target/linux/etrax/patches-2.6.29/600-fix_serial_cris.patch
deleted file mode 100644
index 4032550..0000000
--- a/target/linux/etrax/patches-2.6.29/600-fix_serial_cris.patch
+++ /dev/null
@@ -1,263 +0,0 @@
---- a/drivers/serial/crisv10.c
-+++ b/drivers/serial/crisv10.c
-@@ -28,12 +28,15 @@ static char *serial_version = "$Revision
- #include <linux/mutex.h>
- #include <linux/bitops.h>
- #include <linux/device.h>
-+#include <linux/seq_file.h>
-+#include <linux/delay.h>
-+#include <linux/module.h>
-+#include <linux/uaccess.h>
-+#include <linux/io.h>
- 
--#include <asm/io.h>
- #include <asm/irq.h>
- #include <asm/dma.h>
- #include <asm/system.h>
--#include <linux/delay.h>
- 
- #include <arch/svinto.h>
- 
-@@ -457,7 +460,6 @@ static struct e100_serial rs_table[] = {
- 
- #define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial))
- 
--static struct ktermios *serial_termios[NR_PORTS];
- #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
- static struct fast_timer fast_timers[NR_PORTS];
- #endif
-@@ -4221,151 +4223,132 @@ rs_open(struct tty_struct *tty, struct f
- 	return 0;
- }
- 
-+#ifdef CONFIG_PROC_FS
- /*
-  * /proc fs routines....
-  */
- 
--static int line_info(char *buf, struct e100_serial *info)
-+static void seq_line_info(struct seq_file *m, struct e100_serial *info)
- {
--	char	stat_buf[30];
--	int	ret;
- 	unsigned long tmp;
- 
--	ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d",
--		      info->line, (unsigned long)info->ioport, info->irq);
-+	seq_printf(m, "%d: uart:E100 port:%lX irq:%d",
-+		   info->line, (unsigned long)info->ioport, info->irq);
- 
- 	if (!info->ioport || (info->type == PORT_UNKNOWN)) {
--		ret += sprintf(buf+ret, "\n");
--		return ret;
-+		seq_printf(m, "\n");
-+		return;
- 	}
- 
--	stat_buf[0] = 0;
--	stat_buf[1] = 0;
--	if (!E100_RTS_GET(info))
--		strcat(stat_buf, "|RTS");
--	if (!E100_CTS_GET(info))
--		strcat(stat_buf, "|CTS");
--	if (!E100_DTR_GET(info))
--		strcat(stat_buf, "|DTR");
--	if (!E100_DSR_GET(info))
--		strcat(stat_buf, "|DSR");
--	if (!E100_CD_GET(info))
--		strcat(stat_buf, "|CD");
--	if (!E100_RI_GET(info))
--		strcat(stat_buf, "|RI");
--
--	ret += sprintf(buf+ret, " baud:%d", info->baud);
--
--	ret += sprintf(buf+ret, " tx:%lu rx:%lu",
-+	seq_printf(m, " baud:%d", info->baud);
-+	seq_printf(m, " tx:%lu rx:%lu",
- 		       (unsigned long)info->icount.tx,
- 		       (unsigned long)info->icount.rx);
- 	tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
--	if (tmp) {
--		ret += sprintf(buf+ret, " tx_pend:%lu/%lu",
--			       (unsigned long)tmp,
--			       (unsigned long)SERIAL_XMIT_SIZE);
--	}
--
--	ret += sprintf(buf+ret, " rx_pend:%lu/%lu",
--		       (unsigned long)info->recv_cnt,
--		       (unsigned long)info->max_recv_cnt);
-+	if (tmp)
-+		seq_printf(m, " tx_pend:%lu/%lu",
-+			   (unsigned long)tmp,
-+			   (unsigned long)SERIAL_XMIT_SIZE);
-+
-+	seq_printf(m, " rx_pend:%lu/%lu",
-+		   (unsigned long)info->recv_cnt,
-+		   (unsigned long)info->max_recv_cnt);
- 
- #if 1
- 	if (info->port.tty) {
--
- 		if (info->port.tty->stopped)
--			ret += sprintf(buf+ret, " stopped:%i",
--				       (int)info->port.tty->stopped);
-+			seq_printf(m, " stopped:%i",
-+				   (int)info->port.tty->stopped);
- 		if (info->port.tty->hw_stopped)
--			ret += sprintf(buf+ret, " hw_stopped:%i",
--				       (int)info->port.tty->hw_stopped);
-+			seq_printf(m, " hw_stopped:%i",
-+				   (int)info->port.tty->hw_stopped);
- 	}
- 
- 	{
- 		unsigned char rstat = info->ioport[REG_STATUS];
--		if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) )
--			ret += sprintf(buf+ret, " xoff_detect:1");
-+		if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect))
-+			seq_printf(m, " xoff_detect:1");
- 	}
- 
- #endif
- 
--
--
--
- 	if (info->icount.frame)
--		ret += sprintf(buf+ret, " fe:%lu",
--			       (unsigned long)info->icount.frame);
-+		seq_printf(m, " fe:%lu", (unsigned long)info->icount.frame);
- 
- 	if (info->icount.parity)
--		ret += sprintf(buf+ret, " pe:%lu",
--			       (unsigned long)info->icount.parity);
-+		seq_printf(m, " pe:%lu", (unsigned long)info->icount.parity);
- 
- 	if (info->icount.brk)
--		ret += sprintf(buf+ret, " brk:%lu",
--			       (unsigned long)info->icount.brk);
-+		seq_printf(m, " brk:%lu", (unsigned long)info->icount.brk);
- 
- 	if (info->icount.overrun)
--		ret += sprintf(buf+ret, " oe:%lu",
--			       (unsigned long)info->icount.overrun);
-+		seq_printf(m, " oe:%lu", (unsigned long)info->icount.overrun);
- 
- 	/*
- 	 * Last thing is the RS-232 status lines
- 	 */
--	ret += sprintf(buf+ret, " %s\n", stat_buf+1);
--	return ret;
-+	if (!E100_RTS_GET(info))
-+		seq_puts(m, "|RTS");
-+	if (!E100_CTS_GET(info))
-+		seq_puts(m, "|CTS");
-+	if (!E100_DTR_GET(info))
-+		seq_puts(m, "|DTR");
-+	if (!E100_DSR_GET(info))
-+		seq_puts(m, "|DSR");
-+	if (!E100_CD_GET(info))
-+		seq_puts(m, "|CD");
-+	if (!E100_RI_GET(info))
-+		seq_puts(m, "|RI");
-+	seq_puts(m, "\n");
- }
- 
--int rs_read_proc(char *page, char **start, off_t off, int count,
--		 int *eof, void *data)
-+
-+static int crisv10_proc_show(struct seq_file *m, void *v)
- {
--	int i, len = 0, l;
--	off_t	begin = 0;
-+	int i;
-+
-+	seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version);
- 
--	len += sprintf(page, "serinfo:1.0 driver:%s\n",
--		       serial_version);
--	for (i = 0; i < NR_PORTS && len < 4000; i++) {
-+	for (i = 0; i < NR_PORTS; i++) {
- 		if (!rs_table[i].enabled)
- 			continue;
--		l = line_info(page + len, &rs_table[i]);
--		len += l;
--		if (len+begin > off+count)
--			goto done;
--		if (len+begin < off) {
--			begin += len;
--			len = 0;
--		}
-+		seq_line_info(m, &rs_table[i]);
- 	}
- #ifdef DEBUG_LOG_INCLUDED
- 	for (i = 0; i < debug_log_pos; i++) {
--		len += sprintf(page + len, "%-4i %lu.%lu ", i, debug_log[i].time, timer_data_to_ns(debug_log[i].timer_data));
--		len += sprintf(page + len, debug_log[i].string, debug_log[i].value);
--		if (len+begin > off+count)
--			goto done;
--		if (len+begin < off) {
--			begin += len;
--			len = 0;
--		}
-+		seq_printf(m, "%-4i %lu.%lu ",
-+			 i, debug_log[i].time,
-+			 timer_data_to_ns(debug_log[i].timer_data));
-+		seq_printf(m, debug_log[i].string, debug_log[i].value);
- 	}
--	len += sprintf(page + len, "debug_log %i/%i  %li bytes\n",
--		       i, DEBUG_LOG_SIZE, begin+len);
-+	seq_printf(m, "debug_log %i/%i\n", i, DEBUG_LOG_SIZE);
- 	debug_log_pos = 0;
- #endif
-+	return 0;
-+}
- 
--	*eof = 1;
--done:
--	if (off >= len+begin)
--		return 0;
--	*start = page + (off-begin);
--	return ((count < begin+len-off) ? count : begin+len-off);
-+static int crisv10_proc_open(struct inode *inode, struct file *file)
-+{
-+	return single_open(file, crisv10_proc_show, NULL);
- }
- 
-+static const struct file_operations crisv10_proc_fops = {
-+	.owner		= THIS_MODULE,
-+	.open		= crisv10_proc_open,
-+	.read		= seq_read,
-+	.llseek		= seq_lseek,
-+	.release	= single_release,
-+};
-+#endif
-+
-+
- /* Finally, routines used to initialize the serial driver. */
- 
--static void
--show_serial_version(void)
-+static void show_serial_version(void)
- {
- 	printk(KERN_INFO
--	       "ETRAX 100LX serial-driver %s, (c) 2000-2004 Axis Communications AB\r\n",
-+	       "ETRAX 100LX serial-driver %s, "
-+	       "(c) 2000-2004 Axis Communications AB\r\n",
- 	       &serial_version[11]); /* "$Revision: x.yy" */
- }
- 
-@@ -4389,9 +4372,11 @@ static const struct tty_operations rs_op
- 	.break_ctl = rs_break,
- 	.send_xchar = rs_send_xchar,
- 	.wait_until_sent = rs_wait_until_sent,
--	.read_proc = rs_read_proc,
- 	.tiocmget = rs_tiocmget,
--	.tiocmset = rs_tiocmset
-+	.tiocmset = rs_tiocmset,
-+#ifdef CONFIG_PROC_FS
-+	.proc_fops = &crisv10_proc_fops,
-+#endif
- };
- 
- static struct class *rs_class;
diff --git a/target/linux/etrax/patches-2.6.29/100-cris-makefiles.patch b/target/linux/etrax/patches-2.6.30/100-cris-makefiles.patch
index bf43914..bf43914 100644
--- a/target/linux/etrax/patches-2.6.29/100-cris-makefiles.patch
+++ b/target/linux/etrax/patches-2.6.30/100-cris-makefiles.patch
diff --git a/target/linux/etrax/patches-2.6.29/200-samsung_flash.patch b/target/linux/etrax/patches-2.6.30/200-samsung_flash.patch
index d04c279..d04c279 100644
--- a/target/linux/etrax/patches-2.6.29/200-samsung_flash.patch
+++ b/target/linux/etrax/patches-2.6.30/200-samsung_flash.patch
diff --git a/target/linux/etrax/patches-2.6.29/201-flashsize.patch b/target/linux/etrax/patches-2.6.30/201-flashsize.patch
index 42a467f..42a467f 100644
--- a/target/linux/etrax/patches-2.6.29/201-flashsize.patch
+++ b/target/linux/etrax/patches-2.6.30/201-flashsize.patch
diff --git a/target/linux/etrax/patches-2.6.29/400-Kconfig_source.patch b/target/linux/etrax/patches-2.6.30/400-Kconfig_source.patch
index ed2bfe4..ed2bfe4 100644
--- a/target/linux/etrax/patches-2.6.29/400-Kconfig_source.patch
+++ b/target/linux/etrax/patches-2.6.30/400-Kconfig_source.patch
diff --git a/target/linux/etrax/patches-2.6.29/500-i2c_gvc.patch b/target/linux/etrax/patches-2.6.30/500-i2c_gvc.patch
index dc63165..dc63165 100644
--- a/target/linux/etrax/patches-2.6.29/500-i2c_gvc.patch
+++ b/target/linux/etrax/patches-2.6.30/500-i2c_gvc.patch