summaryrefslogtreecommitdiff
path: root/docs/adding.tex
diff options
context:
space:
mode:
authorFlorian Fainelli <florian@openwrt.org>2008-01-06 12:21:28 +0000
committerFlorian Fainelli <florian@openwrt.org>2008-01-06 12:21:28 +0000
commitd6acc295bd84f556117711361c20b2ce40be5a38 (patch)
tree3f9e59cffa1eb822dfe6d79d3a57a63754ac1d58 /docs/adding.tex
parentc9a70962ecbf189644c9caf694192af2db7bdf29 (diff)
downloadmtk-20170518-d6acc295bd84f556117711361c20b2ce40be5a38.zip
mtk-20170518-d6acc295bd84f556117711361c20b2ce40be5a38.tar.gz
mtk-20170518-d6acc295bd84f556117711361c20b2ce40be5a38.tar.bz2
Trivial patch to correct typos and spelling errors in OpenWRT documentation.\nPlease Apply.\nSigned-off-by: Jesper Dangaard Brouer <hawk@diku.dk>
SVN-Revision: 10129
Diffstat (limited to 'docs/adding.tex')
-rw-r--r--docs/adding.tex20
1 files changed, 10 insertions, 10 deletions
diff --git a/docs/adding.tex b/docs/adding.tex
index 2b47e6a..ec14eae 100644
--- a/docs/adding.tex
+++ b/docs/adding.tex
@@ -15,7 +15,7 @@ when they do, you will most likely not be able to complete the firmware creation
This is one of the reasons why OpenWrt and other firmware exists: providing a
version independent, and tools independent firmware, that can be run on various
-platforms, known to be running Linux originaly.
+platforms, known to be running Linux originally.
\subsection{Which Operating System does this device run?}
@@ -135,7 +135,7 @@ OpenWrt target.
By using a serial port and a level shifter, you may reach the console that is being shown by the device
for debugging or flashing purposes. By analysing the output of this device, you can
-easily notice if the device uses a Linux kenrel or something different.
+easily notice if the device uses a Linux kernel or something different.
\subsection{Finding and using the manufacturer SDK}
@@ -238,11 +238,11 @@ your specific device. Of course, the content produced by the \textbf{diff -urN}
may not always be relevant, so that you have to clean up those patches to only
let the "must have" code into them.
-The fist patch will contain all the code that is needed by the board to be
+The first patch will contain all the code that is needed by the board to be
initialized at startup, as well as processor detection and other boot time
specific fixes.
-The second patch will contain all useful definitions for that board: adresses,
+The second patch will contain all useful definitions for that board: addresses,
kernel granularity, redefinitions, processor family and features ...
The third patch may contain drivers for: serial console, ethernet NIC, wireless
@@ -256,7 +256,7 @@ this hardware.
The bootloader is the first program that is started right after your device has
been powered on. This program, can be more or less sophisticated, some do let you
do network booting, USB mass storage booting ... The bootloader is device and
-architeture specific, some bootloaders were designed to be universal such as
+architecture specific, some bootloaders were designed to be universal such as
RedBoot or U-Boot so that you can meet those loaders on totally different
platforms and expect them to behave the same way.
@@ -331,10 +331,10 @@ You might want to understand the firmware format, even if you are not yet capabl
of running a custom firmware on your device, because this is sometimes a blocking
part of the flashing process.
-A firmare format is most of the time composed of the following fields:
+A firmware format is most of the time composed of the following fields:
\begin{itemize}
-\item header, containing a firmare version and additional fields: Vendor, Hardware version ...
+\item header, containing a firmware version and additional fields: Vendor, Hardware version ...
\item CRC32 checksum on either the whole file or just part of it
\item Binary and/or compressed kernel image
\item Binary and/or compressed root filesystem image
@@ -342,7 +342,7 @@ A firmare format is most of the time composed of the following fields:
\end{itemize}
Once you have figured out how the firmware format is partitioned, you will have
-to write your own tool that produces valid firmare binaries. One thing to be very
+to write your own tool that produces valid firmware binaries. One thing to be very
careful here is the endianness of either the machine that produces the binary
firmware and the device that will be flashed using this binary firmware.
@@ -418,7 +418,7 @@ static int __init device_mtd_init(void)
return -EIO;
}
- // Initlialise the device map
+ // Initialize the device map
simple_map_init(&device_map);
/* MTD informations are closely linked to the flash map device
@@ -474,7 +474,7 @@ module_init(device_mtd_init);
module_exit(device_mtd_cleanup);
-// Macros defining licence and author, parameters can be defined here too.
+// Macros defining license and author, parameters can be defined here too.
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Me, myself and I <memyselfandi@domain.tld");
\end{verbatim}