rename the <boardname>-<kernelversion> directories of base-files to just <boardname>, so that the broadcom stuff can share files across kernel versions. adding back <boardname>-<kernelversion> for version specific overrides is still possible

SVN-Revision: 5427

4 files changed, 236 insertions, 0 deletions

diff --git a/package/base-files/brcm/bin/firstboot b/package/base-files/brcm/bin/firstboot
new file mode 100755
index 0000000..b65d3ee
--- /dev/null
+++ b/package/base-files/brcm/bin/firstboot
@@ -0,0 +1,90 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+rom=$(awk '/squashfs/ {print $2}' /proc/mounts)
+jffs=$(awk '/jffs2/ {print $2}' /proc/mounts)
+
+dupe() { # <new_root> <old_root>
+	cd $1
+	echo -n "creating directories... "
+	{
+		cd $2 
+		find . -xdev -type d
+		echo "./dev ./jffs ./mnt ./proc ./tmp ./sys"
+		# xdev skips mounted directories
+		cd $1 
+	} | xargs mkdir -p
+	echo "done"
+
+	echo -n "setting up symlinks... "
+	for file in $(cd $2; find . -xdev -type f;); do
+		case "$file" in
+		./rom/note) ;; #nothing
+		./etc/config*|\
+		./etc/resolv.conf|\
+		./usr/lib/ipkg/info/*) cp -af $2/$file $file;;
+		*) ln -sf /rom/${file#./*} $file;;
+		esac
+	done
+	for file in $(cd $2; find . -xdev -type l;); do
+		cp -af $2/${file#./*} $file
+	done
+	echo "done"
+}
+
+pivot() { # <new_root> <old_root>
+	mount -o move /proc $1/proc && \
+	pivot_root $1 $1$2 && {
+		mount -o move $2/dev /dev
+		mount -o move $2/tmp /tmp
+		mount -o move $2/sys /sys
+		return 0
+	}
+}
+
+mountdp() { # <device> <mount_point> <ignored> <fs>
+        dev=$1; mnt=$2; shift 2; opt=$*
+	mount $dev $mnt $opt
+	dupe $mnt $rom
+	pivot $mnt /rom
+}
+
+ramoverlay() {
+	mkdir -p /tmp/root
+	mountdp /tmp/root /mnt -o bind
+}
+
+[ "${0##*/}" = "firstboot" ] && {
+	[ -z "$rom" ] && {
+		echo "You do not have a squashfs partition; aborting"
+		echo "(firstboot cannot be run on jffs2 based firmwares)"
+		exit 1
+	}
+
+	[ "$1" = "switch2jffs" ] && {
+		mtd erase OpenWrt
+		mount -o remount,ro none / # try to avoid fs changing while copying
+		mount -o bind / /mnt
+		mount /dev/mtdblock/4 /rom/jffs -t jffs2
+		echo -n "copying files ... "
+		cp -a /mnt/* /rom/jffs
+		umount /mnt
+		echo "done"
+		pivot /rom /mnt
+		mount -o move /mnt /tmp/root
+		pivot /jffs /rom
+		jffs2root --clean
+		exit 0
+	}
+
+	# script run manually
+	[ \! -z "$jffs" ] && {
+		echo "firstboot has already been run"
+		echo "jffs2 partition is mounted, only resetting files"
+		dupe $jffs $rom
+		exit 0
+	}
+
+	mtd erase OpenWrt
+	mountdp /dev/mtdblock/4 /jffs -t jffs2
+}
diff --git a/package/base-files/brcm/etc/init.d/netconfig b/package/base-files/brcm/etc/init.d/netconfig
new file mode 100755
index 0000000..fe39f50
--- /dev/null
+++ b/package/base-files/brcm/etc/init.d/netconfig
@@ -0,0 +1,98 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+START=05
+
+start() {
+	[ -e /etc/config/network ] && exit 0
+
+	mkdir -p /etc/config
+
+	(
+		if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
+			# WGT634u
+			echo boardtype=wgt634u
+		else
+			strings /dev/mtdblock/3
+		fi
+	) | awk '
+	function p(cfgname, name) {
+		if (c[name] != "") print "	option " cfgname "	\"" c[name] "\""
+	}
+	
+	BEGIN {
+		FS="="
+		c["lan_ifname"]="eth0.0"
+		c["wan_ifname"]="eth0.1"
+		c["vlan0ports"]="1 2 3 4 5*"
+		c["vlan1ports"]="0 5"
+	}
+	
+	($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") {
+		nvram[$1] = $2
+	}
+	
+	END {
+		# v1 hardware
+		if (nvram["boardtype"] == "bcm94710dev") {
+			# Asus WL-500g
+			if (nvram["boardnum"] == "asusX") {
+				c["lan_ifname"]="eth0 eth1" # FIXME
+				c["wan_ifname"]=""
+			}
+		}
+		if (nvram["boardtype"] == "bcm94710r4") {
+			# Toshiba WRC-1000
+			c["lan_ifname"] = "eth0"
+			c["wan_ifname"] = "eth1"
+		}
+		if (nvram["boardtype"] == "wgt634u") {
+			c["vlan0ports"] = "0 1 2 3 5*"
+			c["vlan1ports"] = "4 5"
+		}
+		if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
+			if (nvram["boardnum"] == "45") {
+				c["vlan0ports"] = "1 2 3 4 5*"
+				c["vlan1ports"] = "0 5"
+			} else {
+				c["vlan0ports"] = "0 1 2 3 5*"
+				c["vlan1ports"] = "4 5"
+			}
+		}
+	
+		# WAP54G
+		if ((nvram["boardnum"] == "2") || \
+			(nvram["boardnum"] == "1024")) {
+			c["lan_ifname"]="eth0"
+			c["wan_ifname"]=""
+		}
+	
+		print "#### VLAN configuration "
+		print "config switch eth0"
+		p("vlan0", "vlan0ports")
+		p("vlan1", "vlan1ports")
+		print ""
+		print ""
+		print "#### Loopback configuration"
+		print "config interface loopback"
+		print "	option ifname	\"lo\""
+		print "	option proto	static"
+		print "	option ipaddr	127.0.0.1"
+		print "	option netmask	255.0.0.0"
+		print ""
+		print ""
+		print "#### LAN configuration"
+		print "config interface lan"
+		print "	option type 	bridge"
+		p("ifname", "lan_ifname")
+		print "	option proto	static"
+		print "	option ipaddr	192.168.1.1"
+		print "	option netmask	255.255.255.0"
+		print ""
+		print ""
+		print "#### WAN configuration"
+		print "config interface	wan"
+		p("ifname", "wan_ifname")
+		print "	option proto	dhcp"
+	}' > /etc/config/network
+}
diff --git a/package/base-files/brcm/etc/preinit b/package/base-files/brcm/etc/preinit
new file mode 100755
index 0000000..fb13e10
--- /dev/null
+++ b/package/base-files/brcm/etc/preinit
@@ -0,0 +1,13 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+export PATH=/bin:/sbin:/usr/bin:/usr/sbin
+mount none /proc -t proc
+
+[ -f /etc/preinit.arch ] && . /etc/preinit.arch
+[ -z "$FAILSAFE" ] || {
+	echo /bin/true > /proc/sys/kernel/hotplug
+	telnetd -l /bin/login <> /dev/null 2>&1
+}
+mount_root ${FAILSAFE:+failsafe}
+exec /sbin/init
diff --git a/package/base-files/brcm/sbin/mount_root b/package/base-files/brcm/sbin/mount_root
new file mode 100755
index 0000000..e73afdc
--- /dev/null
+++ b/package/base-files/brcm/sbin/mount_root
@@ -0,0 +1,35 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+is_dirty() {
+	grep Broadcom /proc/cpuinfo >&- || return 1
+	OFFSET="$(($(hexdump -v /dev/mtdblock/1 -s 20 -n 2 -e '"%d"')-1))"
+	return $(hexdump -v /dev/mtdblock/1 -s $OFFSET -n 1 -e '"%d"')
+}
+
+size=$(awk '/Mem:/ {l=5242880;print((s=$2/2)<l)?$2-l:s}' /proc/meminfo)
+mount none /tmp -t tmpfs -o size=$size
+
+if [ "$1" != "failsafe" ]; then 
+	mtd unlock linux
+	mount | grep jffs2 >&-
+	if [ $? = 0 ] ; then
+		mount -o remount,rw /dev/root /
+	else
+		. /bin/firstboot
+		is_dirty 
+		[ $? != 0 ] && {
+			echo "switching to jffs2"
+			mount /dev/mtdblock/4 /jffs -t jffs2
+			pivot /jffs /rom
+		} || {
+			echo "jffs2 unusable; using ramdisk"
+			ramoverlay
+		}
+	fi
+fi
+
+mount none /tmp -t tmpfs -o remount,nosuid,nodev,mode=1777
+mkdir -p /dev/pts
+mount none /dev/pts -t devpts
+grep sysfs /proc/filesystems >/dev/null && mount -t sysfs none /sys 2>&-