diff options
| author | Yutang Jiang <yutang.jiang@nxp.com> | 2016-10-29 00:18:23 +0800 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2016-10-31 17:00:10 +0100 |
| commit | 15a14cf1665ef3d8b5c77cce69b52d131340e3b3 (patch) | |
| tree | bd544b24bd3e7fc7efc61f80e1755274971c5582 /package/boot/uboot-layerscape/patches/0035-armv8-ls1012a-enable-two-esdhc-host-controllers-supp.patch | |
| parent | c6c731fe311f7da42777ffd31804a4f6aa3f8e19 (diff) | |
| download | mtk-20170518-15a14cf1665ef3d8b5c77cce69b52d131340e3b3.zip mtk-20170518-15a14cf1665ef3d8b5c77cce69b52d131340e3b3.tar.gz mtk-20170518-15a14cf1665ef3d8b5c77cce69b52d131340e3b3.tar.bz2 | |
layerscape: add 64b/32b target for ls1012ardb device
The QorIQ LS1012A processor, optimized for battery-backed or
USB-powered, integrates a single ARM Cortex-A53 core with a hardware
packet forwarding engine and high-speed interfaces to deliver
line-rate networking performance.
QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance
development platform, with a complete debugging environment.
The LS1012ARDB board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.
LEDE/OPENWRT will auto strip executable program file while make. So we
need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network
fiemware be destroyed, then run make to build ls1012ardb firmware.
The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message.
This issue have noticed the IP owner for investigate, hope he can solve it
earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default
firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4"
bootargs.
Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
Diffstat (limited to 'package/boot/uboot-layerscape/patches/0035-armv8-ls1012a-enable-two-esdhc-host-controllers-supp.patch')
| -rw-r--r-- | package/boot/uboot-layerscape/patches/0035-armv8-ls1012a-enable-two-esdhc-host-controllers-supp.patch | 43 |
1 files changed, 43 insertions, 0 deletions
diff --git a/package/boot/uboot-layerscape/patches/0035-armv8-ls1012a-enable-two-esdhc-host-controllers-supp.patch b/package/boot/uboot-layerscape/patches/0035-armv8-ls1012a-enable-two-esdhc-host-controllers-supp.patch new file mode 100644 index 0000000..2099d40 --- /dev/null +++ b/package/boot/uboot-layerscape/patches/0035-armv8-ls1012a-enable-two-esdhc-host-controllers-supp.patch @@ -0,0 +1,43 @@ +From 7d3d85483a6c4085de5c016b86838681e97e6577 Mon Sep 17 00:00:00 2001 +From: Yangbo Lu <yangbo.lu@nxp.com> +Date: Fri, 20 May 2016 11:31:17 +0800 +Subject: [PATCH 35/93] armv8: ls1012a: enable two esdhc host controllers + support + +LS1012A chip has two esdhc host controllers, and this patch +is to enable two controllers support for it. + +Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> +--- + .../include/asm/arch-fsl-layerscape/immap_lsch2.h | 1 + + include/configs/ls1012a_common.h | 2 ++ + 2 files changed, 3 insertions(+) + +diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h +index 24add1a..6918757 100644 +--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h ++++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h +@@ -19,6 +19,7 @@ + #define CONFIG_SYS_GIC400_ADDR (CONFIG_SYS_IMMR + 0x00400000) + #define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x00530000) + #define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x00560000) ++#define CONFIG_SYS_FSL_ESDHC_1_ADDR (CONFIG_SYS_IMMR + 0x00580000) + #define CONFIG_SYS_FSL_CSU_ADDR (CONFIG_SYS_IMMR + 0x00510000) + #define CONFIG_SYS_FSL_GUTS_ADDR (CONFIG_SYS_IMMR + 0x00ee0000) + #define CONFIG_SYS_FSL_RST_ADDR (CONFIG_SYS_IMMR + 0x00ee00b0) +diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h +index 121824c..89d1370 100644 +--- a/include/configs/ls1012a_common.h ++++ b/include/configs/ls1012a_common.h +@@ -94,6 +94,8 @@ + #ifdef CONFIG_MMC + #define CONFIG_CMD_MMC + #define CONFIG_FSL_ESDHC ++#define CONFIG_FSL_ESDHC_TWO_CONTROLLERS_SUPPORT ++#define CONFIG_FSL_ESDHC_1_NON_REMOVABLE_CARD + #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 + #define CONFIG_GENERIC_MMC + #define CONFIG_CMD_FAT +-- +1.7.9.5 + |