layerscape: uboot-layerscape: prefer github over git.freescale.com

In order to prevent the impact of the merger of the company and the potential
rebase of the SDK repositories, migrate the u-boot source to github.

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>

1 files changed, 0 insertions, 56 deletions

diff --git a/package/boot/uboot-layerscape/patches/0058-mmc-fsl_esdhc-disable-sdhc2-when-no-card-inserted-fo.patch b/package/boot/uboot-layerscape/patches/0058-mmc-fsl_esdhc-disable-sdhc2-when-no-card-inserted-fo.patch
deleted file mode 100644
index 45366ca..0000000
--- a/package/boot/uboot-layerscape/patches/0058-mmc-fsl_esdhc-disable-sdhc2-when-no-card-inserted-fo.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 0499ca266f668c9d72217631151f3b6e15350134 Mon Sep 17 00:00:00 2001
-From: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-Date: Wed, 15 Jun 2016 17:42:51 +0530
-Subject: [PATCH 58/93] mmc: fsl_esdhc: disable sdhc2 when no card inserted
- for ls1012ardb
-
-This is a temporary workaround patch for ls1012ardb becasue there
-was host controller hardware issue found on some RDB boards when
-there was no eMMC adapter card inserted. This would cause below
-continious error messages in linux. So this patch is to disable
-sdhc2 when finding there isn't card inserted.
-"mmc1: Controller never released inhibit bit(s)."
-
-Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
----
- board/freescale/ls1012ardb/ls1012ardb.c |   24 ++++++++++++++++++++++++
- 1 file changed, 24 insertions(+)
-
-diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c
-index 90cbd5e..ad4d8ee 100644
---- a/board/freescale/ls1012ardb/ls1012ardb.c
-+++ b/board/freescale/ls1012ardb/ls1012ardb.c
-@@ -171,6 +171,30 @@ int board_early_init_f(void)
- 	return 0;
- }
- 
-+int mmc_check_sdhc2_card(void)
-+{
-+	u8 io = 0;
-+	u8 is_card = 0;
-+
-+	/* Initialize i2c early for Serial flash bank information */
-+	i2c_set_bus_num(0);
-+
-+	if (i2c_read(I2C_MUX_IO1_ADDR, 0, 1, &io, 1) < 0) {
-+		printf("Error reading i2c boot information!\n");
-+		return 0; /* Don't want to hang() on this error */
-+	}
-+
-+	io = io & 0x0c;
-+
-+	switch (io) {
-+	case 0:
-+	case 8:
-+		is_card = 1;
-+	}
-+
-+	return is_card;
-+}
-+
- int board_init(void)
- {
- 	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
--- 
-1.7.9.5
-