summaryrefslogtreecommitdiff
path: root/package/boot/uboot-sunxi/patches
diff options
context:
space:
mode:
authorZoltan Herpai <wigyori@uid0.hu>2016-03-29 11:42:14 +0000
committerZoltan Herpai <wigyori@uid0.hu>2016-03-29 11:42:14 +0000
commit2d4ebff3ad9b298837782b790ac5aea941c2a255 (patch)
tree8febe14ffb923147afec2dfe978760bfbc9882a2 /package/boot/uboot-sunxi/patches
parentd1aa4bfe1ddd52c52eb6314155245121078399a1 (diff)
downloadmtk-20170518-2d4ebff3ad9b298837782b790ac5aea941c2a255.zip
mtk-20170518-2d4ebff3ad9b298837782b790ac5aea941c2a255.tar.gz
mtk-20170518-2d4ebff3ad9b298837782b790ac5aea941c2a255.tar.bz2
package: uboot-sunxi: various changes - bump to 2016.03 - add bugfixes related to 2016.03 update - sync DTS files with mainline - add support for non-standard uEnv.txt - add initial support for Theobroma A31-yQ7 devboard
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 49089
Diffstat (limited to 'package/boot/uboot-sunxi/patches')
-rw-r--r--package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch394
-rw-r--r--package/boot/uboot-sunxi/patches/010-dt-sync-files-with-kernel.patch1411
-rw-r--r--package/boot/uboot-sunxi/patches/010-sunxi-support-smta.patch60
-rw-r--r--package/boot/uboot-sunxi/patches/011-dt-sync-dts-files-with-kernel.patch7354
-rw-r--r--package/boot/uboot-sunxi/patches/011-sunxi-support-h3-ccu.patch83
-rw-r--r--package/boot/uboot-sunxi/patches/012-sun6i-fix-clock_twi_onoff.patch40
-rw-r--r--package/boot/uboot-sunxi/patches/012-sunxi-support-psci-on-h3.patch22
-rw-r--r--package/boot/uboot-sunxi/patches/013-enable-realtek-phy.patch26
-rw-r--r--package/boot/uboot-sunxi/patches/013-sunxi-enable-booting-nonsec_HYP-on-h3.patch16
-rw-r--r--package/boot/uboot-sunxi/patches/014-fix-gmac-init.patch135
-rw-r--r--package/boot/uboot-sunxi/patches/015-fix-2nd-usb-ctrler-on-sun47i.patch82
-rw-r--r--package/boot/uboot-sunxi/patches/016-spl-print-mmc-slot.patch33
-rw-r--r--package/boot/uboot-sunxi/patches/017-usb-add-support-for-usb3-vbus-pin.patch43
-rw-r--r--package/boot/uboot-sunxi/patches/018-usb-specify-vbus-pins-on-orangepis.patch35
-rw-r--r--package/boot/uboot-sunxi/patches/019-sid-add-efuse-support-for-h3-a83t.patch35
-rw-r--r--package/boot/uboot-sunxi/patches/020-boot-display-board-model-on-startup.patch25
-rw-r--r--package/boot/uboot-sunxi/patches/020-fix-bananapro-sata-LDO4.patch25
-rw-r--r--package/boot/uboot-sunxi/patches/091-sun6i-sync-PLL1-multdiv-with-Boot1.patch37
-rw-r--r--package/boot/uboot-sunxi/patches/093-sun6i-fix-PLL-LDO-voltselect.patch77
-rw-r--r--package/boot/uboot-sunxi/patches/100-sun6i-alternate-on-UART2.patch21
-rw-r--r--package/boot/uboot-sunxi/patches/101-sun6i-support-console-on-UART2.patch37
-rw-r--r--package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch28
22 files changed, 9813 insertions, 206 deletions
diff --git a/package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch b/package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch
new file mode 100644
index 0000000..2bf5778
--- /dev/null
+++ b/package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch
@@ -0,0 +1,394 @@
+diff -ruN a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
+--- a/arch/arm/dts/Makefile 2016-01-12 15:06:54.000000000 +0100
++++ b/arch/arm/dts/Makefile 2016-01-30 15:31:50.000000000 +0100
+@@ -142,6 +142,7 @@
+ sun6i-a31-m9.dtb \
+ sun6i-a31-mele-a1000g-quad.dtb \
+ sun6i-a31-mixtile-loftq.dtb \
++ sun6i-a31-pangolin.dtb \
+ sun6i-a31s-cs908.dtb \
+ sun6i-a31s-primo81.dtb \
+ sun6i-a31s-sinovoip-bpi-m2.dtb
+diff -ruN a/arch/arm/dts/sun6i-a31.dtsi b/arch/arm/dts/sun6i-a31.dtsi
+--- a/arch/arm/dts/sun6i-a31.dtsi 2016-01-12 15:06:54.000000000 +0100
++++ b/arch/arm/dts/sun6i-a31.dtsi 2016-01-31 15:06:47.000000000 +0100
+@@ -643,6 +643,13 @@
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
++ i2c3_pins_a: i2c3@0 {
++ allwinner,pins = "PB5", "PB6";
++ allwinner,function = "i2c3";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0", "PF1", "PF2",
+ "PF3", "PF4", "PF5";
+diff -ruN a/arch/arm/dts/sun6i-a31-pangolin.dts b/arch/arm/dts/sun6i-a31-pangolin.dts
+--- a/arch/arm/dts/sun6i-a31-pangolin.dts 1970-01-01 01:00:00.000000000 +0100
++++ b/arch/arm/dts/sun6i-a31-pangolin.dts 2016-02-09 01:21:44.965168099 +0100
+@@ -0,0 +1,292 @@
++/*
++ * Copyright 2015, Theobroma Systems Design und Consulting GmbH
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++#include "sun6i-a31.dtsi"
++#include "sunxi-common-regulators.dtsi"
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/pinctrl/sun4i-a10.h>
++
++/ {
++ model = "Theobroma Systems A31 Pangolin";
++ compatible = "tsd,a31-pangolin", "allwinner,sun6i-a31";
++
++ aliases {
++ serial0 = &uart0;
++ serial2 = &uart2;
++ spi0 = &spi0;
++ spi1 = &spi1;
++ spi2 = &spi2;
++ spi3 = &spi3;
++ };
++
++ chosen {
++ stdout-path = "serial2:115200n8";
++ };
++};
++
++&ehci0 {
++ status = "okay";
++};
++
++&ohci0 {
++ status = "okay";
++};
++
++&ehci1 {
++ status = "okay";
++};
++
++&ohci1 {
++ status = "okay";
++};
++
++&ohci2 {
++ status = "okay";
++};
++
++&gmac {
++ pinctrl-names = "default";
++ pinctrl-0 = <&gmac_pins_rgmii_a>;
++ phy = <&phy1>;
++ phy-mode = "rgmii";
++ snps,reset-gpio = <&pio 0 7 GPIO_ACTIVE_LOW>;
++ snps,reset-active-low;
++ snps,reset-delays-us = <0 10000 30000>;
++ status = "okay";
++
++ phy1: ethernet-phy@4 {
++ reg = <4>;
++ };
++};
++
++&i2c0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c0_pins_a>;
++ status = "okay";
++};
++
++&i2c1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c1_pins_a>;
++ status = "okay";
++};
++
++&i2c2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c2_pins_a>;
++ status = "okay";
++};
++
++&i2c3 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c3_pins_a>;
++ status = "okay";
++
++ rtc_twi: rtc@6f {
++ compatible = "isil,isl1208";
++ reg = <0x6f>;
++ };
++ fan: fan@18 {
++ compatible = "ti,amc6821";
++ reg = <0x18>;
++ cooling-min-state = <0>;
++ cooling-max-state = <9>;
++ #cooling-cells = <2>;
++ };
++};
++
++&spi0 {
++ status = "okay";
++
++ flash: flash@0 {
++ compatible = "spansion,m25p40";
++ spi-max-frequency = <16000000>;
++ spi-cpol;
++ spi-cpha;
++ };
++};
++
++&spi1 {
++ status = "okay";
++};
++
++&ir {
++ pinctrl-names = "default";
++ pinctrl-0 = <&ir_pins_a>;
++ status = "okay";
++};
++
++&mmc0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_pangolin>;
++ vmmc-supply = <&reg_vcc3v0>;
++ bus-width = <4>;
++ cd-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */
++ status = "okay";
++};
++
++&mmc0_pins_a {
++ /* external pull-ups missing for some pins */
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++};
++
++&mmc2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc2_pins_a>;
++ vmmc-supply = <&reg_vcc3v0>;
++ bus-width = <8>;
++ non-removable;
++ status = "okay";
++};
++
++&pio {
++ mmc0_cd_pin_pangolin: mmc0_cd_pin@0 {
++ allwinner,pins = "PC19";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
++
++ leds_pins_pangolin: led_pins@0 {
++ allwinner,pins = "PH7", "PC16";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
++ mmc2_pins_a: mmc2@0 {
++ allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11",
++ "PC12","PC13","PC14","PC15";
++ allwinner,function = "mmc2";
++ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++};
++
++&p2wi {
++ status = "okay";
++
++ axp221: pmic@68 {
++ compatible = "x-powers,axp221";
++ reg = <0x68>;
++ interrupt-parent = <&nmi_intc>;
++ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
++ interrupt-controller;
++ #interrupt-cells = <1>;
++ dcdc1-supply = <&vcc_3v0>;
++ dcdc5-supply = <&vcc_dram>;
++
++ regulators {
++ x-powers,dcdc-freq = <3000>;
++
++ vcc_3v0: dcdc1 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "vcc-3v0";
++ };
++
++ vdd_cpu: dcdc2 {
++ regulator-always-on;
++ regulator-min-microvolt = <700000>;
++ regulator-max-microvolt = <1320000>;
++ regulator-name = "vdd-cpu";
++ };
++
++ vdd_gpu: dcdc3 {
++ regulator-always-on;
++ regulator-min-microvolt = <700000>;
++ regulator-max-microvolt = <1320000>;
++ regulator-name = "vdd-gpu";
++ };
++
++ vdd_sys_dll: dcdc4 {
++ regulator-always-on;
++ regulator-min-microvolt = <1100000>;
++ regulator-max-microvolt = <1100000>;
++ regulator-name = "vdd-sys-dll";
++ };
++
++ vcc_dram: dcdc5 {
++ regulator-always-on;
++ regulator-min-microvolt = <1500000>;
++ regulator-max-microvolt = <1500000>;
++ regulator-name = "vcc-dram";
++ };
++
++ vcc_wifi: aldo1 {
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc_wifi";
++ };
++
++ avcc: aldo3 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "avcc";
++ };
++ };
++ };
++};
++
++&uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pins_a>;
++ status = "okay";
++};
++
++&usb1_vbus_pin_a {
++ allwinner,pins = "PD23";
++};
++
++&reg_usb1_vbus {
++ gpio = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD 23 */
++ status = "okay";
++};
++
++&usbphy {
++ status = "okay";
++ usb1_vbus-supply = <&reg_usb1_vbus>;
++};
+diff -ruN a/configs/pangolin_defconfig b/configs/pangolin_defconfig
+--- a/configs/pangolin_defconfig 1970-01-01 01:00:00.000000000 +0100
++++ b/configs/pangolin_defconfig 2016-01-30 14:43:59.000000000 +0100
+@@ -0,0 +1,36 @@
++CONFIG_SUNXI_PANGOLIN=y
++CONFIG_SPL=y
++CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII"
++CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-pangolin"
++CONFIG_VIDEO_VGA_VIA_LCD=y
++CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25"
++CONFIG_ARM=y
++CONFIG_ARCH_SUNXI=y
++CONFIG_MACH_SUN6I=y
++CONFIG_DRAM_CHANNELS=1
++CONFIG_DRAM_CLK=360
++CONFIG_DRAM_ZQ=70
++CONFIG_AXP_DCDC1_VOLT=3300
++CONFIG_AXP_ALDO1_VOLT=0
++CONFIG_AXP_ALDO2_VOLT=1800
++CONFIG_AXP_ALDO3_VOLT=3000
++CONFIG_AXP_DLDO4_VOLT=3300
++CONFIG_AXP_ELDO1_VOLT=1200
++CONFIG_AXP_ELDO2_VOLT=2500
++CONFIG_AXP_ELDO3_VOLT=3300
++CONFIG_MMC_SUNXI_SLOT_EXTRA=2
++CONFIG_CONS_INDEX=3
++# Vbus gpio for usb1
++CONFIG_USB1_VBUS_PIN=""
++# No Vbus gpio for usb2
++CONFIG_USB2_VBUS_PIN=""
++CONFIG_USB=y
++CONFIG_DM_USB=y
++CONFIG_USB_EHCI=y
++CONFIG_USB_KEYBOARD=y
++CONFIG_DM_ETH=y
++CONFIG_CMD_IMLS=n
++CONFIG_ETH_DESIGNWARE=y
++CONFIG_DM_SPI=y
++CONFIG_DM_SPI_FLASH=y
++CONFIG_SUNXI_SPI=y
+diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
+index e155c4c..1b147b2 100644
+--- a/board/sunxi/Kconfig
++++ b/board/sunxi/Kconfig
+@@ -15,7 +15,6 @@ config SUNXI_GEN_SUN6I
+ separate ahb reset control registers, custom pmic bus, new style
+ watchdog, etc.
+
+-
+ choice
+ prompt "Sunxi SoC Variant"
+ optional
+@@ -80,6 +79,14 @@ config MACH_SUN8I
+ bool
+ default y if MACH_SUN8I_A23 || MACH_SUN8I_A33
+
++choice
++ prompt "Sunxi Board Variant"
++ optional
++
++config SUNXI_PANGOLIN
++ bool "Theobroma A31 uQ7 Board"
++
++endchoice
+
+ config DRAM_CLK
+ int "sunxi dram clock speed"
+--
+cgit v0.10.2
+
diff --git a/package/boot/uboot-sunxi/patches/010-dt-sync-files-with-kernel.patch b/package/boot/uboot-sunxi/patches/010-dt-sync-files-with-kernel.patch
new file mode 100644
index 0000000..7092568
--- /dev/null
+++ b/package/boot/uboot-sunxi/patches/010-dt-sync-files-with-kernel.patch
@@ -0,0 +1,1411 @@
+From 4bb656e9dde2019cb42ac4c27b3a114a801ad127 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Wed, 16 Mar 2016 13:41:23 +0100
+Subject: [PATCH] include/dt-bindings: Sync some files with the kernel
+
+This commit syncs the dt-bindings/input/* headers with the kernel (v4.5)
+and adds dt-bindings/clock/sun4i-a10-pll2.h, both are necessary for newer
+sunxi dts files to build.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+Reviewed-by: Tom Rini <trini@konsulko.com>
+Acked-by: Ian Campbell <ijc@hellion.org.uk>
+---
+ include/dt-bindings/clock/sun4i-a10-pll2.h | 53 ++
+ include/dt-bindings/input/input.h | 510 +---------------
+ include/dt-bindings/input/linux-event-codes.h | 805 ++++++++++++++++++++++++++
+ 3 files changed, 859 insertions(+), 509 deletions(-)
+ create mode 100644 include/dt-bindings/clock/sun4i-a10-pll2.h
+ create mode 100644 include/dt-bindings/input/linux-event-codes.h
+
+diff --git a/include/dt-bindings/clock/sun4i-a10-pll2.h b/include/dt-bindings/clock/sun4i-a10-pll2.h
+new file mode 100644
+index 0000000..071c811
+--- /dev/null
++++ b/include/dt-bindings/clock/sun4i-a10-pll2.h
+@@ -0,0 +1,53 @@
++/*
++ * Copyright 2015 Maxime Ripard
++ *
++ * Maxime Ripard <maxime.ripard@free-electrons.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++#ifndef __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_
++#define __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_
++
++#define SUN4I_A10_PLL2_1X 0
++#define SUN4I_A10_PLL2_2X 1
++#define SUN4I_A10_PLL2_4X 2
++#define SUN4I_A10_PLL2_8X 3
++
++#endif /* __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_ */
+diff --git a/include/dt-bindings/input/input.h b/include/dt-bindings/input/input.h
+index 042e7b3..a214133 100644
+--- a/include/dt-bindings/input/input.h
++++ b/include/dt-bindings/input/input.h
+@@ -9,515 +9,7 @@
+ #ifndef _DT_BINDINGS_INPUT_INPUT_H
+ #define _DT_BINDINGS_INPUT_INPUT_H
+
+-#define KEY_RESERVED 0
+-#define KEY_ESC 1
+-#define KEY_1 2
+-#define KEY_2 3
+-#define KEY_3 4
+-#define KEY_4 5
+-#define KEY_5 6
+-#define KEY_6 7
+-#define KEY_7 8
+-#define KEY_8 9
+-#define KEY_9 10
+-#define KEY_0 11
+-#define KEY_MINUS 12
+-#define KEY_EQUAL 13
+-#define KEY_BACKSPACE 14
+-#define KEY_TAB 15
+-#define KEY_Q 16
+-#define KEY_W 17
+-#define KEY_E 18
+-#define KEY_R 19
+-#define KEY_T 20
+-#define KEY_Y 21
+-#define KEY_U 22
+-#define KEY_I 23
+-#define KEY_O 24
+-#define KEY_P 25
+-#define KEY_LEFTBRACE 26
+-#define KEY_RIGHTBRACE 27
+-#define KEY_ENTER 28
+-#define KEY_LEFTCTRL 29
+-#define KEY_A 30
+-#define KEY_S 31
+-#define KEY_D 32
+-#define KEY_F 33
+-#define KEY_G 34
+-#define KEY_H 35
+-#define KEY_J 36
+-#define KEY_K 37
+-#define KEY_L 38
+-#define KEY_SEMICOLON 39
+-#define KEY_APOSTROPHE 40
+-#define KEY_GRAVE 41
+-#define KEY_LEFTSHIFT 42
+-#define KEY_BACKSLASH 43
+-#define KEY_Z 44
+-#define KEY_X 45
+-#define KEY_C 46
+-#define KEY_V 47
+-#define KEY_B 48
+-#define KEY_N 49
+-#define KEY_M 50
+-#define KEY_COMMA 51
+-#define KEY_DOT 52
+-#define KEY_SLASH 53
+-#define KEY_RIGHTSHIFT 54
+-#define KEY_KPASTERISK 55
+-#define KEY_LEFTALT 56
+-#define KEY_SPACE 57
+-#define KEY_CAPSLOCK 58
+-#define KEY_F1 59
+-#define KEY_F2 60
+-#define KEY_F3 61
+-#define KEY_F4 62
+-#define KEY_F5 63
+-#define KEY_F6 64
+-#define KEY_F7 65
+-#define KEY_F8 66
+-#define KEY_F9 67
+-#define KEY_F10 68
+-#define KEY_NUMLOCK 69
+-#define KEY_SCROLLLOCK 70
+-#define KEY_KP7 71
+-#define KEY_KP8 72
+-#define KEY_KP9 73
+-#define KEY_KPMINUS 74
+-#define KEY_KP4 75
+-#define KEY_KP5 76
+-#define KEY_KP6 77
+-#define KEY_KPPLUS 78
+-#define KEY_KP1 79
+-#define KEY_KP2 80
+-#define KEY_KP3 81
+-#define KEY_KP0 82
+-#define KEY_KPDOT 83
+-
+-#define KEY_ZENKAKUHANKAKU 85
+-#define KEY_102ND 86
+-#define KEY_F11 87
+-#define KEY_F12 88
+-#define KEY_RO 89
+-#define KEY_KATAKANA 90
+-#define KEY_HIRAGANA 91
+-#define KEY_HENKAN 92
+-#define KEY_KATAKANAHIRAGANA 93
+-#define KEY_MUHENKAN 94
+-#define KEY_KPJPCOMMA 95
+-#define KEY_KPENTER 96
+-#define KEY_RIGHTCTRL 97
+-#define KEY_KPSLASH 98
+-#define KEY_SYSRQ 99
+-#define KEY_RIGHTALT 100
+-#define KEY_LINEFEED 101
+-#define KEY_HOME 102
+-#define KEY_UP 103
+-#define KEY_PAGEUP 104
+-#define KEY_LEFT 105
+-#define KEY_RIGHT 106
+-#define KEY_END 107
+-#define KEY_DOWN 108
+-#define KEY_PAGEDOWN 109
+-#define KEY_INSERT 110
+-#define KEY_DELETE 111
+-#define KEY_MACRO 112
+-#define KEY_MUTE 113
+-#define KEY_VOLUMEDOWN 114
+-#define KEY_VOLUMEUP 115
+-#define KEY_POWER 116 /* SC System Power Down */
+-#define KEY_KPEQUAL 117
+-#define KEY_KPPLUSMINUS 118
+-#define KEY_PAUSE 119
+-#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */
+-
+-#define KEY_KPCOMMA 121
+-#define KEY_HANGEUL 122
+-#define KEY_HANGUEL KEY_HANGEUL
+-#define KEY_HANJA 123
+-#define KEY_YEN 124
+-#define KEY_LEFTMETA 125
+-#define KEY_RIGHTMETA 126
+-#define KEY_COMPOSE 127
+-
+-#define KEY_STOP 128 /* AC Stop */
+-#define KEY_AGAIN 129
+-#define KEY_PROPS 130 /* AC Properties */
+-#define KEY_UNDO 131 /* AC Undo */
+-#define KEY_FRONT 132
+-#define KEY_COPY 133 /* AC Copy */
+-#define KEY_OPEN 134 /* AC Open */
+-#define KEY_PASTE 135 /* AC Paste */
+-#define KEY_FIND 136 /* AC Search */
+-#define KEY_CUT 137 /* AC Cut */
+-#define KEY_HELP 138 /* AL Integrated Help Center */
+-#define KEY_MENU 139 /* Menu (show menu) */
+-#define KEY_CALC 140 /* AL Calculator */
+-#define KEY_SETUP 141
+-#define KEY_SLEEP 142 /* SC System Sleep */
+-#define KEY_WAKEUP 143 /* System Wake Up */
+-#define KEY_FILE 144 /* AL Local Machine Browser */
+-#define KEY_SENDFILE 145
+-#define KEY_DELETEFILE 146
+-#define KEY_XFER 147
+-#define KEY_PROG1 148
+-#define KEY_PROG2 149
+-#define KEY_WWW 150 /* AL Internet Browser */
+-#define KEY_MSDOS 151
+-#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */
+-#define KEY_SCREENLOCK KEY_COFFEE
+-#define KEY_DIRECTION 153
+-#define KEY_CYCLEWINDOWS 154
+-#define KEY_MAIL 155
+-#define KEY_BOOKMARKS 156 /* AC Bookmarks */
+-#define KEY_COMPUTER 157
+-#define KEY_BACK 158 /* AC Back */
+-#define KEY_FORWARD 159 /* AC Forward */
+-#define KEY_CLOSECD 160
+-#define KEY_EJECTCD 161
+-#define KEY_EJECTCLOSECD 162
+-#define KEY_NEXTSONG 163
+-#define KEY_PLAYPAUSE 164
+-#define KEY_PREVIOUSSONG 165
+-#define KEY_STOPCD 166
+-#define KEY_RECORD 167
+-#define KEY_REWIND 168
+-#define KEY_PHONE 169 /* Media Select Telephone */
+-#define KEY_ISO 170
+-#define KEY_CONFIG 171 /* AL Consumer Control Configuration */
+-#define KEY_HOMEPAGE 172 /* AC Home */
+-#define KEY_REFRESH 173 /* AC Refresh */
+-#define KEY_EXIT 174 /* AC Exit */
+-#define KEY_MOVE 175
+-#define KEY_EDIT 176
+-#define KEY_SCROLLUP 177
+-#define KEY_SCROLLDOWN 178
+-#define KEY_KPLEFTPAREN 179
+-#define KEY_KPRIGHTPAREN 180
+-#define KEY_NEW 181 /* AC New */
+-#define KEY_REDO 182 /* AC Redo/Repeat */
+-
+-#define KEY_F13 183
+-#define KEY_F14 184
+-#define KEY_F15 185
+-#define KEY_F16 186
+-#define KEY_F17 187
+-#define KEY_F18 188
+-#define KEY_F19 189
+-#define KEY_F20 190
+-#define KEY_F21 191
+-#define KEY_F22 192
+-#define KEY_F23 193
+-#define KEY_F24 194
+-
+-#define KEY_PLAYCD 200
+-#define KEY_PAUSECD 201
+-#define KEY_PROG3 202
+-#define KEY_PROG4 203
+-#define KEY_DASHBOARD 204 /* AL Dashboard */
+-#define KEY_SUSPEND 205
+-#define KEY_CLOSE 206 /* AC Close */
+-#define KEY_PLAY 207
+-#define KEY_FASTFORWARD 208
+-#define KEY_BASSBOOST 209
+-#define KEY_PRINT 210 /* AC Print */
+-#define KEY_HP 211
+-#define KEY_CAMERA 212
+-#define KEY_SOUND 213
+-#define KEY_QUESTION 214
+-#define KEY_EMAIL 215
+-#define KEY_CHAT 216
+-#define KEY_SEARCH 217
+-#define KEY_CONNECT 218
+-#define KEY_FINANCE 219 /* AL Checkbook/Finance */
+-#define KEY_SPORT 220
+-#define KEY_SHOP 221
+-#define KEY_ALTERASE 222
+-#define KEY_CANCEL 223 /* AC Cancel */
+-#define KEY_BRIGHTNESSDOWN 224
+-#define KEY_BRIGHTNESSUP 225
+-#define KEY_MEDIA 226
+-
+-#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video
+- outputs (Monitor/LCD/TV-out/etc) */
+-#define KEY_KBDILLUMTOGGLE 228
+-#define KEY_KBDILLUMDOWN 229
+-#define KEY_KBDILLUMUP 230
+-
+-#define KEY_SEND 231 /* AC Send */
+-#define KEY_REPLY 232 /* AC Reply */
+-#define KEY_FORWARDMAIL 233 /* AC Forward Msg */
+-#define KEY_SAVE 234 /* AC Save */
+-#define KEY_DOCUMENTS 235
+-
+-#define KEY_BATTERY 236
+-
+-#define KEY_BLUETOOTH 237
+-#define KEY_WLAN 238
+-#define KEY_UWB 239
+-
+-#define KEY_UNKNOWN 240
+-
+-#define KEY_VIDEO_NEXT 241 /* drive next video source */
+-#define KEY_VIDEO_PREV 242 /* drive previous video source */
+-#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */
+-#define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */
+-#define KEY_DISPLAY_OFF 245 /* display device to off state */
+-
+-#define KEY_WIMAX 246
+-#define KEY_RFKILL 247 /* Key that controls all radios */
+-
+-#define KEY_MICMUTE 248 /* Mute / unmute the microphone */
+-
+-/* Code 255 is reserved for special needs of AT keyboard driver */
+-
+-#define BTN_MISC 0x100
+-#define BTN_0 0x100
+-#define BTN_1 0x101
+-#define BTN_2 0x102
+-#define BTN_3 0x103
+-#define BTN_4 0x104
+-#define BTN_5 0x105
+-#define BTN_6 0x106
+-#define BTN_7 0x107
+-#define BTN_8 0x108
+-#define BTN_9 0x109
+-
+-#define BTN_MOUSE 0x110
+-#define BTN_LEFT 0x110
+-#define BTN_RIGHT 0x111
+-#define BTN_MIDDLE 0x112
+-#define BTN_SIDE 0x113
+-#define BTN_EXTRA 0x114
+-#define BTN_FORWARD 0x115
+-#define BTN_BACK 0x116
+-#define BTN_TASK 0x117
+-
+-#define BTN_JOYSTICK 0x120
+-#define BTN_TRIGGER 0x120
+-#define BTN_THUMB 0x121
+-#define BTN_THUMB2 0x122
+-#define BTN_TOP 0x123
+-#define BTN_TOP2 0x124
+-#define BTN_PINKIE 0x125
+-#define BTN_BASE 0x126
+-#define BTN_BASE2 0x127
+-#define BTN_BASE3 0x128
+-#define BTN_BASE4 0x129
+-#define BTN_BASE5 0x12a
+-#define BTN_BASE6 0x12b
+-#define BTN_DEAD 0x12f
+-
+-#define BTN_GAMEPAD 0x130
+-#define BTN_SOUTH 0x130
+-#define BTN_A BTN_SOUTH
+-#define BTN_EAST 0x131
+-#define BTN_B BTN_EAST
+-#define BTN_C 0x132
+-#define BTN_NORTH 0x133
+-#define BTN_X BTN_NORTH
+-#define BTN_WEST 0x134
+-#define BTN_Y BTN_WEST
+-#define BTN_Z 0x135
+-#define BTN_TL 0x136
+-#define BTN_TR 0x137
+-#define BTN_TL2 0x138
+-#define BTN_TR2 0x139
+-#define BTN_SELECT 0x13a
+-#define BTN_START 0x13b
+-#define BTN_MODE 0x13c
+-#define BTN_THUMBL 0x13d
+-#define BTN_THUMBR 0x13e
+-
+-#define BTN_DIGI 0x140
+-#define BTN_TOOL_PEN 0x140
+-#define BTN_TOOL_RUBBER 0x141
+-#define BTN_TOOL_BRUSH 0x142
+-#define BTN_TOOL_PENCIL 0x143
+-#define BTN_TOOL_AIRBRUSH 0x144
+-#define BTN_TOOL_FINGER 0x145
+-#define BTN_TOOL_MOUSE 0x146
+-#define BTN_TOOL_LENS 0x147
+-#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */
+-#define BTN_TOUCH 0x14a
+-#define BTN_STYLUS 0x14b
+-#define BTN_STYLUS2 0x14c
+-#define BTN_TOOL_DOUBLETAP 0x14d
+-#define BTN_TOOL_TRIPLETAP 0x14e
+-#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */
+-
+-#define BTN_WHEEL 0x150
+-#define BTN_GEAR_DOWN 0x150
+-#define BTN_GEAR_UP 0x151
+-
+-#define KEY_OK 0x160
+-#define KEY_SELECT 0x161
+-#define KEY_GOTO 0x162
+-#define KEY_CLEAR 0x163
+-#define KEY_POWER2 0x164
+-#define KEY_OPTION 0x165
+-#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */
+-#define KEY_TIME 0x167
+-#define KEY_VENDOR 0x168
+-#define KEY_ARCHIVE 0x169
+-#define KEY_PROGRAM 0x16a /* Media Select Program Guide */
+-#define KEY_CHANNEL 0x16b
+-#define KEY_FAVORITES 0x16c
+-#define KEY_EPG 0x16d
+-#define KEY_PVR 0x16e /* Media Select Home */
+-#define KEY_MHP 0x16f
+-#define KEY_LANGUAGE 0x170
+-#define KEY_TITLE 0x171
+-#define KEY_SUBTITLE 0x172
+-#define KEY_ANGLE 0x173
+-#define KEY_ZOOM 0x174
+-#define KEY_MODE 0x175
+-#define KEY_KEYBOARD 0x176
+-#define KEY_SCREEN 0x177
+-#define KEY_PC 0x178 /* Media Select Computer */
+-#define KEY_TV 0x179 /* Media Select TV */
+-#define KEY_TV2 0x17a /* Media Select Cable */
+-#define KEY_VCR 0x17b /* Media Select VCR */
+-#define KEY_VCR2 0x17c /* VCR Plus */
+-#define KEY_SAT 0x17d /* Media Select Satellite */
+-#define KEY_SAT2 0x17e
+-#define KEY_CD 0x17f /* Media Select CD */
+-#define KEY_TAPE 0x180 /* Media Select Tape */
+-#define KEY_RADIO 0x181
+-#define KEY_TUNER 0x182 /* Media Select Tuner */
+-#define KEY_PLAYER 0x183
+-#define KEY_TEXT 0x184
+-#define KEY_DVD 0x185 /* Media Select DVD */
+-#define KEY_AUX 0x186
+-#define KEY_MP3 0x187
+-#define KEY_AUDIO 0x188 /* AL Audio Browser */
+-#define KEY_VIDEO 0x189 /* AL Movie Browser */
+-#define KEY_DIRECTORY 0x18a
+-#define KEY_LIST 0x18b
+-#define KEY_MEMO 0x18c /* Media Select Messages */
+-#define KEY_CALENDAR 0x18d
+-#define KEY_RED 0x18e
+-#define KEY_GREEN 0x18f
+-#define KEY_YELLOW 0x190
+-#define KEY_BLUE 0x191
+-#define KEY_CHANNELUP 0x192 /* Channel Increment */
+-#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */
+-#define KEY_FIRST 0x194
+-#define KEY_LAST 0x195 /* Recall Last */
+-#define KEY_AB 0x196
+-#define KEY_NEXT 0x197
+-#define KEY_RESTART 0x198
+-#define KEY_SLOW 0x199
+-#define KEY_SHUFFLE 0x19a
+-#define KEY_BREAK 0x19b
+-#define KEY_PREVIOUS 0x19c
+-#define KEY_DIGITS 0x19d
+-#define KEY_TEEN 0x19e
+-#define KEY_TWEN 0x19f
+-#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */
+-#define KEY_GAMES 0x1a1 /* Media Select Games */
+-#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */
+-#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */
+-#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */
+-#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */
+-#define KEY_EDITOR 0x1a6 /* AL Text Editor */
+-#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */
+-#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */
+-#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */
+-#define KEY_DATABASE 0x1aa /* AL Database App */
+-#define KEY_NEWS 0x1ab /* AL Newsreader */
+-#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */
+-#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */
+-#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */
+-#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */
+-#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */
+-#define KEY_LOGOFF 0x1b1 /* AL Logoff */
+-
+-#define KEY_DOLLAR 0x1b2
+-#define KEY_EURO 0x1b3
+-
+-#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */
+-#define KEY_FRAMEFORWARD 0x1b5
+-#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
+-#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */
+-#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */
+-#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */
+-#define KEY_IMAGES 0x1ba /* AL Image Browser */
+-
+-#define KEY_DEL_EOL 0x1c0
+-#define KEY_DEL_EOS 0x1c1
+-#define KEY_INS_LINE 0x1c2
+-#define KEY_DEL_LINE 0x1c3
+-
+-#define KEY_FN 0x1d0
+-#define KEY_FN_ESC 0x1d1
+-#define KEY_FN_F1 0x1d2
+-#define KEY_FN_F2 0x1d3
+-#define KEY_FN_F3 0x1d4
+-#define KEY_FN_F4 0x1d5
+-#define KEY_FN_F5 0x1d6
+-#define KEY_FN_F6 0x1d7
+-#define KEY_FN_F7 0x1d8
+-#define KEY_FN_F8 0x1d9
+-#define KEY_FN_F9 0x1da
+-#define KEY_FN_F10 0x1db
+-#define KEY_FN_F11 0x1dc
+-#define KEY_FN_F12 0x1dd
+-#define KEY_FN_1 0x1de
+-#define KEY_FN_2 0x1df
+-#define KEY_FN_D 0x1e0
+-#define KEY_FN_E 0x1e1
+-#define KEY_FN_F 0x1e2
+-#define KEY_FN_S 0x1e3
+-#define KEY_FN_B 0x1e4
+-
+-#define KEY_BRL_DOT1 0x1f1
+-#define KEY_BRL_DOT2 0x1f2
+-#define KEY_BRL_DOT3 0x1f3
+-#define KEY_BRL_DOT4 0x1f4
+-#define KEY_BRL_DOT5 0x1f5
+-#define KEY_BRL_DOT6 0x1f6
+-#define KEY_BRL_DOT7 0x1f7
+-#define KEY_BRL_DOT8 0x1f8
+-#define KEY_BRL_DOT9 0x1f9
+-#define KEY_BRL_DOT10 0x1fa
+-
+-#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */
+-#define KEY_NUMERIC_1 0x201 /* and other keypads */
+-#define KEY_NUMERIC_2 0x202
+-#define KEY_NUMERIC_3 0x203
+-#define KEY_NUMERIC_4 0x204
+-#define KEY_NUMERIC_5 0x205
+-#define KEY_NUMERIC_6 0x206
+-#define KEY_NUMERIC_7 0x207
+-#define KEY_NUMERIC_8 0x208
+-#define KEY_NUMERIC_9 0x209
+-#define KEY_NUMERIC_STAR 0x20a
+-#define KEY_NUMERIC_POUND 0x20b
+-
+-#define KEY_CAMERA_FOCUS 0x210
+-#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
+-
+-#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */
+-#define KEY_TOUCHPAD_ON 0x213
+-#define KEY_TOUCHPAD_OFF 0x214
+-
+-#define KEY_CAMERA_ZOOMIN 0x215
+-#define KEY_CAMERA_ZOOMOUT 0x216
+-#define KEY_CAMERA_UP 0x217
+-#define KEY_CAMERA_DOWN 0x218
+-#define KEY_CAMERA_LEFT 0x219
+-#define KEY_CAMERA_RIGHT 0x21a
+-
+-#define KEY_ATTENDANT_ON 0x21b
+-#define KEY_ATTENDANT_OFF 0x21c
+-#define KEY_ATTENDANT_TOGGLE 0x21d /* Attendant call on or off */
+-#define KEY_LIGHTS_TOGGLE 0x21e /* Reading light on or off */
+-
+-#define BTN_DPAD_UP 0x220
+-#define BTN_DPAD_DOWN 0x221
+-#define BTN_DPAD_LEFT 0x222
+-#define BTN_DPAD_RIGHT 0x223
++#include "linux-event-codes.h"
+
+ #define MATRIX_KEY(row, col, code) \
+ ((((row) & 0xFF) << 24) | (((col) & 0xFF) << 16) | ((code) & 0xFFFF))
+diff --git a/include/dt-bindings/input/linux-event-codes.h b/include/dt-bindings/input/linux-event-codes.h
+new file mode 100644
+index 0000000..87cf351
+--- /dev/null
++++ b/include/dt-bindings/input/linux-event-codes.h
+@@ -0,0 +1,805 @@
++/*
++ * Input event codes
++ *
++ * *** IMPORTANT ***
++ * This file is not only included from C-code but also from devicetree source
++ * files. As such this file MUST only contain comments and defines.
++ *
++ * Copyright (c) 1999-2002 Vojtech Pavlik
++ * Copyright (c) 2015 Hans de Goede <hdegoede@redhat.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ */
++#ifndef _UAPI_INPUT_EVENT_CODES_H
++#define _UAPI_INPUT_EVENT_CODES_H
++
++/*
++ * Device properties and quirks
++ */
++
++#define INPUT_PROP_POINTER 0x00 /* needs a pointer */
++#define INPUT_PROP_DIRECT 0x01 /* direct input devices */
++#define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */
++#define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */
++#define INPUT_PROP_TOPBUTTONPAD 0x04 /* softbuttons at top of pad */
++#define INPUT_PROP_POINTING_STICK 0x05 /* is a pointing stick */
++#define INPUT_PROP_ACCELEROMETER 0x06 /* has accelerometer */
++
++#define INPUT_PROP_MAX 0x1f
++#define INPUT_PROP_CNT (INPUT_PROP_MAX + 1)
++
++/*
++ * Event types
++ */
++
++#define EV_SYN 0x00
++#define EV_KEY 0x01
++#define EV_REL 0x02
++#define EV_ABS 0x03
++#define EV_MSC 0x04
++#define EV_SW 0x05
++#define EV_LED 0x11
++#define EV_SND 0x12
++#define EV_REP 0x14
++#define EV_FF 0x15
++#define EV_PWR 0x16
++#define EV_FF_STATUS 0x17
++#define EV_MAX 0x1f
++#define EV_CNT (EV_MAX+1)
++
++/*
++ * Synchronization events.
++ */
++
++#define SYN_REPORT 0
++#define SYN_CONFIG 1
++#define SYN_MT_REPORT 2
++#define SYN_DROPPED 3
++#define SYN_MAX 0xf
++#define SYN_CNT (SYN_MAX+1)
++
++/*
++ * Keys and buttons
++ *
++ * Most of the keys/buttons are modeled after USB HUT 1.12
++ * (see http://www.usb.org/developers/hidpage).
++ * Abbreviations in the comments:
++ * AC - Application Control
++ * AL - Application Launch Button
++ * SC - System Control
++ */
++
++#define KEY_RESERVED 0
++#define KEY_ESC 1
++#define KEY_1 2
++#define KEY_2 3
++#define KEY_3 4
++#define KEY_4 5
++#define KEY_5 6
++#define KEY_6 7
++#define KEY_7 8
++#define KEY_8 9
++#define KEY_9 10
++#define KEY_0 11
++#define KEY_MINUS 12
++#define KEY_EQUAL 13
++#define KEY_BACKSPACE 14
++#define KEY_TAB 15
++#define KEY_Q 16
++#define KEY_W 17
++#define KEY_E 18
++#define KEY_R 19
++#define KEY_T 20
++#define KEY_Y 21
++#define KEY_U 22
++#define KEY_I 23
++#define KEY_O 24
++#define KEY_P 25
++#define KEY_LEFTBRACE 26
++#define KEY_RIGHTBRACE 27
++#define KEY_ENTER 28
++#define KEY_LEFTCTRL 29
++#define KEY_A 30
++#define KEY_S 31
++#define KEY_D 32
++#define KEY_F 33
++#define KEY_G 34
++#define KEY_H 35
++#define KEY_J 36
++#define KEY_K 37
++#define KEY_L 38
++#define KEY_SEMICOLON 39
++#define KEY_APOSTROPHE 40
++#define KEY_GRAVE 41
++#define KEY_LEFTSHIFT 42
++#define KEY_BACKSLASH 43
++#define KEY_Z 44
++#define KEY_X 45
++#define KEY_C 46
++#define KEY_V 47
++#define KEY_B 48
++#define KEY_N 49
++#define KEY_M 50
++#define KEY_COMMA 51
++#define KEY_DOT 52
++#define KEY_SLASH 53
++#define KEY_RIGHTSHIFT 54
++#define KEY_KPASTERISK 55
++#define KEY_LEFTALT 56
++#define KEY_SPACE 57
++#define KEY_CAPSLOCK 58
++#define KEY_F1 59
++#define KEY_F2 60
++#define KEY_F3 61
++#define KEY_F4 62
++#define KEY_F5 63
++#define KEY_F6 64
++#define KEY_F7 65
++#define KEY_F8 66
++#define KEY_F9 67
++#define KEY_F10 68
++#define KEY_NUMLOCK 69
++#define KEY_SCROLLLOCK 70
++#define KEY_KP7 71
++#define KEY_KP8 72
++#define KEY_KP9 73
++#define KEY_KPMINUS 74
++#define KEY_KP4 75
++#define KEY_KP5 76
++#define KEY_KP6 77
++#define KEY_KPPLUS 78
++#define KEY_KP1 79
++#define KEY_KP2 80
++#define KEY_KP3 81
++#define KEY_KP0 82
++#define KEY_KPDOT 83
++
++#define KEY_ZENKAKUHANKAKU 85
++#define KEY_102ND 86
++#define KEY_F11 87
++#define KEY_F12 88
++#define KEY_RO 89
++#define KEY_KATAKANA 90
++#define KEY_HIRAGANA 91
++#define KEY_HENKAN 92
++#define KEY_KATAKANAHIRAGANA 93
++#define KEY_MUHENKAN 94
++#define KEY_KPJPCOMMA 95
++#define KEY_KPENTER 96
++#define KEY_RIGHTCTRL 97
++#define KEY_KPSLASH 98
++#define KEY_SYSRQ 99
++#define KEY_RIGHTALT 100
++#define KEY_LINEFEED 101
++#define KEY_HOME 102
++#define KEY_UP 103
++#define KEY_PAGEUP 104
++#define KEY_LEFT 105
++#define KEY_RIGHT 106
++#define KEY_END 107
++#define KEY_DOWN 108
++#define KEY_PAGEDOWN 109
++#define KEY_INSERT 110
++#define KEY_DELETE 111
++#define KEY_MACRO 112
++#define KEY_MUTE 113
++#define KEY_VOLUMEDOWN 114
++#define KEY_VOLUMEUP 115
++#define KEY_POWER 116 /* SC System Power Down */
++#define KEY_KPEQUAL 117
++#define KEY_KPPLUSMINUS 118
++#define KEY_PAUSE 119
++#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */
++
++#define KEY_KPCOMMA 121
++#define KEY_HANGEUL 122
++#define KEY_HANGUEL KEY_HANGEUL
++#define KEY_HANJA 123
++#define KEY_YEN 124
++#define KEY_LEFTMETA 125
++#define KEY_RIGHTMETA 126
++#define KEY_COMPOSE 127
++
++#define KEY_STOP 128 /* AC Stop */
++#define KEY_AGAIN 129
++#define KEY_PROPS 130 /* AC Properties */
++#define KEY_UNDO 131 /* AC Undo */
++#define KEY_FRONT 132
++#define KEY_COPY 133 /* AC Copy */
++#define KEY_OPEN 134 /* AC Open */
++#define KEY_PASTE 135 /* AC Paste */
++#define KEY_FIND 136 /* AC Search */
++#define KEY_CUT 137 /* AC Cut */
++#define KEY_HELP 138 /* AL Integrated Help Center */
++#define KEY_MENU 139 /* Menu (show menu) */
++#define KEY_CALC 140 /* AL Calculator */
++#define KEY_SETUP 141
++#define KEY_SLEEP 142 /* SC System Sleep */
++#define KEY_WAKEUP 143 /* System Wake Up */
++#define KEY_FILE 144 /* AL Local Machine Browser */
++#define KEY_SENDFILE 145
++#define KEY_DELETEFILE 146
++#define KEY_XFER 147
++#define KEY_PROG1 148
++#define KEY_PROG2 149
++#define KEY_WWW 150 /* AL Internet Browser */
++#define KEY_MSDOS 151
++#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */
++#define KEY_SCREENLOCK KEY_COFFEE
++#define KEY_ROTATE_DISPLAY 153 /* Display orientation for e.g. tablets */
++#define KEY_DIRECTION KEY_ROTATE_DISPLAY
++#define KEY_CYCLEWINDOWS 154
++#define KEY_MAIL 155
++#define KEY_BOOKMARKS 156 /* AC Bookmarks */
++#define KEY_COMPUTER 157
++#define KEY_BACK 158 /* AC Back */
++#define KEY_FORWARD 159 /* AC Forward */
++#define KEY_CLOSECD 160
++#define KEY_EJECTCD 161
++#define KEY_EJECTCLOSECD 162
++#define KEY_NEXTSONG 163
++#define KEY_PLAYPAUSE 164
++#define KEY_PREVIOUSSONG 165
++#define KEY_STOPCD 166
++#define KEY_RECORD 167
++#define KEY_REWIND 168
++#define KEY_PHONE 169 /* Media Select Telephone */
++#define KEY_ISO 170
++#define KEY_CONFIG 171 /* AL Consumer Control Configuration */
++#define KEY_HOMEPAGE 172 /* AC Home */
++#define KEY_REFRESH 173 /* AC Refresh */
++#define KEY_EXIT 174 /* AC Exit */
++#define KEY_MOVE 175
++#define KEY_EDIT 176
++#define KEY_SCROLLUP 177
++#define KEY_SCROLLDOWN 178
++#define KEY_KPLEFTPAREN 179
++#define KEY_KPRIGHTPAREN 180
++#define KEY_NEW 181 /* AC New */
++#define KEY_REDO 182 /* AC Redo/Repeat */
++
++#define KEY_F13 183
++#define KEY_F14 184
++#define KEY_F15 185
++#define KEY_F16 186
++#define KEY_F17 187
++#define KEY_F18 188
++#define KEY_F19 189
++#define KEY_F20 190
++#define KEY_F21 191
++#define KEY_F22 192
++#define KEY_F23 193
++#define KEY_F24 194
++
++#define KEY_PLAYCD 200
++#define KEY_PAUSECD 201
++#define KEY_PROG3 202
++#define KEY_PROG4 203
++#define KEY_DASHBOARD 204 /* AL Dashboard */
++#define KEY_SUSPEND 205
++#define KEY_CLOSE 206 /* AC Close */
++#define KEY_PLAY 207
++#define KEY_FASTFORWARD 208
++#define KEY_BASSBOOST 209
++#define KEY_PRINT 210 /* AC Print */
++#define KEY_HP 211
++#define KEY_CAMERA 212
++#define KEY_SOUND 213
++#define KEY_QUESTION 214
++#define KEY_EMAIL 215
++#define KEY_CHAT 216
++#define KEY_SEARCH 217
++#define KEY_CONNECT 218
++#define KEY_FINANCE 219 /* AL Checkbook/Finance */
++#define KEY_SPORT 220
++#define KEY_SHOP 221
++#define KEY_ALTERASE 222
++#define KEY_CANCEL 223 /* AC Cancel */
++#define KEY_BRIGHTNESSDOWN 224
++#define KEY_BRIGHTNESSUP 225
++#define KEY_MEDIA 226
++
++#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video
++ outputs (Monitor/LCD/TV-out/etc) */
++#define KEY_KBDILLUMTOGGLE 228
++#define KEY_KBDILLUMDOWN 229
++#define KEY_KBDILLUMUP 230
++
++#define KEY_SEND 231 /* AC Send */
++#define KEY_REPLY 232 /* AC Reply */
++#define KEY_FORWARDMAIL 233 /* AC Forward Msg */
++#define KEY_SAVE 234 /* AC Save */
++#define KEY_DOCUMENTS 235
++
++#define KEY_BATTERY 236
++
++#define KEY_BLUETOOTH 237
++#define KEY_WLAN 238
++#define KEY_UWB 239
++
++#define KEY_UNKNOWN 240
++
++#define KEY_VIDEO_NEXT 241 /* drive next video source */
++#define KEY_VIDEO_PREV 242 /* drive previous video source */
++#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */
++#define KEY_BRIGHTNESS_AUTO 244 /* Set Auto Brightness: manual
++ brightness control is off,
++ rely on ambient */
++#define KEY_BRIGHTNESS_ZERO KEY_BRIGHTNESS_AUTO
++#define KEY_DISPLAY_OFF 245 /* display device to off state */
++
++#define KEY_WWAN 246 /* Wireless WAN (LTE, UMTS, GSM, etc.) */
++#define KEY_WIMAX KEY_WWAN
++#define KEY_RFKILL 247 /* Key that controls all radios */
++
++#define KEY_MICMUTE 248 /* Mute / unmute the microphone */
++
++/* Code 255 is reserved for special needs of AT keyboard driver */
++
++#define BTN_MISC 0x100
++#define BTN_0 0x100
++#define BTN_1 0x101
++#define BTN_2 0x102
++#define BTN_3 0x103
++#define BTN_4 0x104
++#define BTN_5 0x105
++#define BTN_6 0x106
++#define BTN_7 0x107
++#define BTN_8 0x108
++#define BTN_9 0x109
++
++#define BTN_MOUSE 0x110
++#define BTN_LEFT 0x110
++#define BTN_RIGHT 0x111
++#define BTN_MIDDLE 0x112
++#define BTN_SIDE 0x113
++#define BTN_EXTRA 0x114
++#define BTN_FORWARD 0x115
++#define BTN_BACK 0x116
++#define BTN_TASK 0x117
++
++#define BTN_JOYSTICK 0x120
++#define BTN_TRIGGER 0x120
++#define BTN_THUMB 0x121
++#define BTN_THUMB2 0x122
++#define BTN_TOP 0x123
++#define BTN_TOP2 0x124
++#define BTN_PINKIE 0x125
++#define BTN_BASE 0x126
++#define BTN_BASE2 0x127
++#define BTN_BASE3 0x128
++#define BTN_BASE4 0x129
++#define BTN_BASE5 0x12a
++#define BTN_BASE6 0x12b
++#define BTN_DEAD 0x12f
++
++#define BTN_GAMEPAD 0x130
++#define BTN_SOUTH 0x130
++#define BTN_A BTN_SOUTH
++#define BTN_EAST 0x131
++#define BTN_B BTN_EAST
++#define BTN_C 0x132
++#define BTN_NORTH 0x133
++#define BTN_X BTN_NORTH
++#define BTN_WEST 0x134
++#define BTN_Y BTN_WEST
++#define BTN_Z 0x135
++#define BTN_TL 0x136
++#define BTN_TR 0x137
++#define BTN_TL2 0x138
++#define BTN_TR2 0x139
++#define BTN_SELECT 0x13a
++#define BTN_START 0x13b
++#define BTN_MODE 0x13c
++#define BTN_THUMBL 0x13d
++#define BTN_THUMBR 0x13e
++
++#define BTN_DIGI 0x140
++#define BTN_TOOL_PEN 0x140
++#define BTN_TOOL_RUBBER 0x141
++#define BTN_TOOL_BRUSH 0x142
++#define BTN_TOOL_PENCIL 0x143
++#define BTN_TOOL_AIRBRUSH 0x144
++#define BTN_TOOL_FINGER 0x145
++#define BTN_TOOL_MOUSE 0x146
++#define BTN_TOOL_LENS 0x147
++#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */
++#define BTN_TOUCH 0x14a
++#define BTN_STYLUS 0x14b
++#define BTN_STYLUS2 0x14c
++#define BTN_TOOL_DOUBLETAP 0x14d
++#define BTN_TOOL_TRIPLETAP 0x14e
++#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */
++
++#define BTN_WHEEL 0x150
++#define BTN_GEAR_DOWN 0x150
++#define BTN_GEAR_UP 0x151
++
++#define KEY_OK 0x160
++#define KEY_SELECT 0x161
++#define KEY_GOTO 0x162
++#define KEY_CLEAR 0x163
++#define KEY_POWER2 0x164
++#define KEY_OPTION 0x165
++#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */
++#define KEY_TIME 0x167
++#define KEY_VENDOR 0x168
++#define KEY_ARCHIVE 0x169
++#define KEY_PROGRAM 0x16a /* Media Select Program Guide */
++#define KEY_CHANNEL 0x16b
++#define KEY_FAVORITES 0x16c
++#define KEY_EPG 0x16d
++#define KEY_PVR 0x16e /* Media Select Home */
++#define KEY_MHP 0x16f
++#define KEY_LANGUAGE 0x170
++#define KEY_TITLE 0x171
++#define KEY_SUBTITLE 0x172
++#define KEY_ANGLE 0x173
++#define KEY_ZOOM 0x174
++#define KEY_MODE 0x175
++#define KEY_KEYBOARD 0x176
++#define KEY_SCREEN 0x177
++#define KEY_PC 0x178 /* Media Select Computer */
++#define KEY_TV 0x179 /* Media Select TV */
++#define KEY_TV2 0x17a /* Media Select Cable */
++#define KEY_VCR 0x17b /* Media Select VCR */
++#define KEY_VCR2 0x17c /* VCR Plus */
++#define KEY_SAT 0x17d /* Media Select Satellite */
++#define KEY_SAT2 0x17e
++#define KEY_CD 0x17f /* Media Select CD */
++#define KEY_TAPE 0x180 /* Media Select Tape */
++#define KEY_RADIO 0x181
++#define KEY_TUNER 0x182 /* Media Select Tuner */
++#define KEY_PLAYER 0x183
++#define KEY_TEXT 0x184
++#define KEY_DVD 0x185 /* Media Select DVD */
++#define KEY_AUX 0x186
++#define KEY_MP3 0x187
++#define KEY_AUDIO 0x188 /* AL Audio Browser */
++#define KEY_VIDEO 0x189 /* AL Movie Browser */
++#define KEY_DIRECTORY 0x18a
++#define KEY_LIST 0x18b
++#define KEY_MEMO 0x18c /* Media Select Messages */
++#define KEY_CALENDAR 0x18d
++#define KEY_RED 0x18e
++#define KEY_GREEN 0x18f
++#define KEY_YELLOW 0x190
++#define KEY_BLUE 0x191
++#define KEY_CHANNELUP 0x192 /* Channel Increment */
++#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */
++#define KEY_FIRST 0x194
++#define KEY_LAST 0x195 /* Recall Last */
++#define KEY_AB 0x196
++#define KEY_NEXT 0x197
++#define KEY_RESTART 0x198
++#define KEY_SLOW 0x199
++#define KEY_SHUFFLE 0x19a
++#define KEY_BREAK 0x19b
++#define KEY_PREVIOUS 0x19c
++#define KEY_DIGITS 0x19d
++#define KEY_TEEN 0x19e
++#define KEY_TWEN 0x19f
++#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */
++#define KEY_GAMES 0x1a1 /* Media Select Games */
++#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */
++#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */
++#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */
++#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */
++#define KEY_EDITOR 0x1a6 /* AL Text Editor */
++#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */
++#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */
++#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */
++#define KEY_DATABASE 0x1aa /* AL Database App */
++#define KEY_NEWS 0x1ab /* AL Newsreader */
++#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */
++#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */
++#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */
++#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */
++#define KEY_BRIGHTNESS_TOGGLE KEY_DISPLAYTOGGLE
++#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */
++#define KEY_LOGOFF 0x1b1 /* AL Logoff */
++
++#define KEY_DOLLAR 0x1b2
++#define KEY_EURO 0x1b3
++
++#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */
++#define KEY_FRAMEFORWARD 0x1b5
++#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
++#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */
++#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */
++#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */
++#define KEY_IMAGES 0x1ba /* AL Image Browser */
++
++#define KEY_DEL_EOL 0x1c0
++#define KEY_DEL_EOS 0x1c1
++#define KEY_INS_LINE 0x1c2
++#define KEY_DEL_LINE 0x1c3
++
++#define KEY_FN 0x1d0
++#define KEY_FN_ESC 0x1d1
++#define KEY_FN_F1 0x1d2
++#define KEY_FN_F2 0x1d3
++#define KEY_FN_F3 0x1d4
++#define KEY_FN_F4 0x1d5
++#define KEY_FN_F5 0x1d6
++#define KEY_FN_F6 0x1d7
++#define KEY_FN_F7 0x1d8
++#define KEY_FN_F8 0x1d9
++#define KEY_FN_F9 0x1da
++#define KEY_FN_F10 0x1db
++#define KEY_FN_F11 0x1dc
++#define KEY_FN_F12 0x1dd
++#define KEY_FN_1 0x1de
++#define KEY_FN_2 0x1df
++#define KEY_FN_D 0x1e0
++#define KEY_FN_E 0x1e1
++#define KEY_FN_F 0x1e2
++#define KEY_FN_S 0x1e3
++#define KEY_FN_B 0x1e4
++
++#define KEY_BRL_DOT1 0x1f1
++#define KEY_BRL_DOT2 0x1f2
++#define KEY_BRL_DOT3 0x1f3
++#define KEY_BRL_DOT4 0x1f4
++#define KEY_BRL_DOT5 0x1f5
++#define KEY_BRL_DOT6 0x1f6
++#define KEY_BRL_DOT7 0x1f7
++#define KEY_BRL_DOT8 0x1f8
++#define KEY_BRL_DOT9 0x1f9
++#define KEY_BRL_DOT10 0x1fa
++
++#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */
++#define KEY_NUMERIC_1 0x201 /* and other keypads */
++#define KEY_NUMERIC_2 0x202
++#define KEY_NUMERIC_3 0x203
++#define KEY_NUMERIC_4 0x204
++#define KEY_NUMERIC_5 0x205
++#define KEY_NUMERIC_6 0x206
++#define KEY_NUMERIC_7 0x207
++#define KEY_NUMERIC_8 0x208
++#define KEY_NUMERIC_9 0x209
++#define KEY_NUMERIC_STAR 0x20a
++#define KEY_NUMERIC_POUND 0x20b
++#define KEY_NUMERIC_A 0x20c /* Phone key A - HUT Telephony 0xb9 */
++#define KEY_NUMERIC_B 0x20d
++#define KEY_NUMERIC_C 0x20e
++#define KEY_NUMERIC_D 0x20f
++
++#define KEY_CAMERA_FOCUS 0x210
++#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
++
++#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */
++#define KEY_TOUCHPAD_ON 0x213
++#define KEY_TOUCHPAD_OFF 0x214
++
++#define KEY_CAMERA_ZOOMIN 0x215
++#define KEY_CAMERA_ZOOMOUT 0x216
++#define KEY_CAMERA_UP 0x217
++#define KEY_CAMERA_DOWN 0x218
++#define KEY_CAMERA_LEFT 0x219
++#define KEY_CAMERA_RIGHT 0x21a
++
++#define KEY_ATTENDANT_ON 0x21b
++#define KEY_ATTENDANT_OFF 0x21c
++#define KEY_ATTENDANT_TOGGLE 0x21d /* Attendant call on or off */
++#define KEY_LIGHTS_TOGGLE 0x21e /* Reading light on or off */
++
++#define BTN_DPAD_UP 0x220
++#define BTN_DPAD_DOWN 0x221
++#define BTN_DPAD_LEFT 0x222
++#define BTN_DPAD_RIGHT 0x223
++
++#define KEY_ALS_TOGGLE 0x230 /* Ambient light sensor */
++
++#define KEY_BUTTONCONFIG 0x240 /* AL Button Configuration */
++#define KEY_TASKMANAGER 0x241 /* AL Task/Project Manager */
++#define KEY_JOURNAL 0x242 /* AL Log/Journal/Timecard */
++#define KEY_CONTROLPANEL 0x243 /* AL Control Panel */
++#define KEY_APPSELECT 0x244 /* AL Select Task/Application */
++#define KEY_SCREENSAVER 0x245 /* AL Screen Saver */
++#define KEY_VOICECOMMAND 0x246 /* Listening Voice Command */
++
++#define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */
++#define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */
++
++#define KEY_KBDINPUTASSIST_PREV 0x260
++#define KEY_KBDINPUTASSIST_NEXT 0x261
++#define KEY_KBDINPUTASSIST_PREVGROUP 0x262
++#define KEY_KBDINPUTASSIST_NEXTGROUP 0x263
++#define KEY_KBDINPUTASSIST_ACCEPT 0x264
++#define KEY_KBDINPUTASSIST_CANCEL 0x265
++
++#define BTN_TRIGGER_HAPPY 0x2c0
++#define BTN_TRIGGER_HAPPY1 0x2c0
++#define BTN_TRIGGER_HAPPY2 0x2c1
++#define BTN_TRIGGER_HAPPY3 0x2c2
++#define BTN_TRIGGER_HAPPY4 0x2c3
++#define BTN_TRIGGER_HAPPY5 0x2c4
++#define BTN_TRIGGER_HAPPY6 0x2c5
++#define BTN_TRIGGER_HAPPY7 0x2c6
++#define BTN_TRIGGER_HAPPY8 0x2c7
++#define BTN_TRIGGER_HAPPY9 0x2c8
++#define BTN_TRIGGER_HAPPY10 0x2c9
++#define BTN_TRIGGER_HAPPY11 0x2ca
++#define BTN_TRIGGER_HAPPY12 0x2cb
++#define BTN_TRIGGER_HAPPY13 0x2cc
++#define BTN_TRIGGER_HAPPY14 0x2cd
++#define BTN_TRIGGER_HAPPY15 0x2ce
++#define BTN_TRIGGER_HAPPY16 0x2cf
++#define BTN_TRIGGER_HAPPY17 0x2d0
++#define BTN_TRIGGER_HAPPY18 0x2d1
++#define BTN_TRIGGER_HAPPY19 0x2d2
++#define BTN_TRIGGER_HAPPY20 0x2d3
++#define BTN_TRIGGER_HAPPY21 0x2d4
++#define BTN_TRIGGER_HAPPY22 0x2d5
++#define BTN_TRIGGER_HAPPY23 0x2d6
++#define BTN_TRIGGER_HAPPY24 0x2d7
++#define BTN_TRIGGER_HAPPY25 0x2d8
++#define BTN_TRIGGER_HAPPY26 0x2d9
++#define BTN_TRIGGER_HAPPY27 0x2da
++#define BTN_TRIGGER_HAPPY28 0x2db
++#define BTN_TRIGGER_HAPPY29 0x2dc
++#define BTN_TRIGGER_HAPPY30 0x2dd
++#define BTN_TRIGGER_HAPPY31 0x2de
++#define BTN_TRIGGER_HAPPY32 0x2df
++#define BTN_TRIGGER_HAPPY33 0x2e0
++#define BTN_TRIGGER_HAPPY34 0x2e1
++#define BTN_TRIGGER_HAPPY35 0x2e2
++#define BTN_TRIGGER_HAPPY36 0x2e3
++#define BTN_TRIGGER_HAPPY37 0x2e4
++#define BTN_TRIGGER_HAPPY38 0x2e5
++#define BTN_TRIGGER_HAPPY39 0x2e6
++#define BTN_TRIGGER_HAPPY40 0x2e7
++
++/* We avoid low common keys in module aliases so they don't get huge. */
++#define KEY_MIN_INTERESTING KEY_MUTE
++#define KEY_MAX 0x2ff
++#define KEY_CNT (KEY_MAX+1)
++
++/*
++ * Relative axes
++ */
++
++#define REL_X 0x00
++#define REL_Y 0x01
++#define REL_Z 0x02
++#define REL_RX 0x03
++#define REL_RY 0x04
++#define REL_RZ 0x05
++#define REL_HWHEEL 0x06
++#define REL_DIAL 0x07
++#define REL_WHEEL 0x08
++#define REL_MISC 0x09
++#define REL_MAX 0x0f
++#define REL_CNT (REL_MAX+1)
++
++/*
++ * Absolute axes
++ */
++
++#define ABS_X 0x00
++#define ABS_Y 0x01
++#define ABS_Z 0x02
++#define ABS_RX 0x03
++#define ABS_RY 0x04
++#define ABS_RZ 0x05
++#define ABS_THROTTLE 0x06
++#define ABS_RUDDER 0x07
++#define ABS_WHEEL 0x08
++#define ABS_GAS 0x09
++#define ABS_BRAKE 0x0a
++#define ABS_HAT0X 0x10
++#define ABS_HAT0Y 0x11
++#define ABS_HAT1X 0x12
++#define ABS_HAT1Y 0x13
++#define ABS_HAT2X 0x14
++#define ABS_HAT2Y 0x15
++#define ABS_HAT3X 0x16
++#define ABS_HAT3Y 0x17
++#define ABS_PRESSURE 0x18
++#define ABS_DISTANCE 0x19
++#define ABS_TILT_X 0x1a
++#define ABS_TILT_Y 0x1b
++#define ABS_TOOL_WIDTH 0x1c
++
++#define ABS_VOLUME 0x20
++
++#define ABS_MISC 0x28
++
++#define ABS_MT_SLOT 0x2f /* MT slot being modified */
++#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */
++#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */
++#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */
++#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */
++#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */
++#define ABS_MT_POSITION_X 0x35 /* Center X touch position */
++#define ABS_MT_POSITION_Y 0x36 /* Center Y touch position */
++#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
++#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
++#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */
++#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */
++#define ABS_MT_DISTANCE 0x3b /* Contact hover distance */
++#define ABS_MT_TOOL_X 0x3c /* Center X tool position */
++#define ABS_MT_TOOL_Y 0x3d /* Center Y tool position */
++
++
++#define ABS_MAX 0x3f
++#define ABS_CNT (ABS_MAX+1)
++
++/*
++ * Switch events
++ */
++
++#define SW_LID 0x00 /* set = lid shut */
++#define SW_TABLET_MODE 0x01 /* set = tablet mode */
++#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */
++#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any"
++ set = radio enabled */
++#define SW_RADIO SW_RFKILL_ALL /* deprecated */
++#define SW_MICROPHONE_INSERT 0x04 /* set = inserted */
++#define SW_DOCK 0x05 /* set = plugged into dock */
++#define SW_LINEOUT_INSERT 0x06 /* set = inserted */
++#define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */
++#define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */
++#define SW_CAMERA_LENS_COVER 0x09 /* set = lens covered */
++#define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */
++#define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */
++#define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */
++#define SW_LINEIN_INSERT 0x0d /* set = inserted */
++#define SW_MUTE_DEVICE 0x0e /* set = device disabled */
++#define SW_MAX 0x0f
++#define SW_CNT (SW_MAX+1)
++
++/*
++ * Misc events
++ */
++
++#define MSC_SERIAL 0x00
++#define MSC_PULSELED 0x01
++#define MSC_GESTURE 0x02
++#define MSC_RAW 0x03
++#define MSC_SCAN 0x04
++#define MSC_TIMESTAMP 0x05
++#define MSC_MAX 0x07
++#define MSC_CNT (MSC_MAX+1)
++
++/*
++ * LEDs
++ */
++
++#define LED_NUML 0x00
++#define LED_CAPSL 0x01
++#define LED_SCROLLL 0x02
++#define LED_COMPOSE 0x03
++#define LED_KANA 0x04
++#define LED_SLEEP 0x05
++#define LED_SUSPEND 0x06
++#define LED_MUTE 0x07
++#define LED_MISC 0x08
++#define LED_MAIL 0x09
++#define LED_CHARGING 0x0a
++#define LED_MAX 0x0f
++#define LED_CNT (LED_MAX+1)
++
++/*
++ * Autorepeat values
++ */
++
++#define REP_DELAY 0x00
++#define REP_PERIOD 0x01
++#define REP_MAX 0x01
++#define REP_CNT (REP_MAX+1)
++
++/*
++ * Sounds
++ */
++
++#define SND_CLICK 0x00
++#define SND_BELL 0x01
++#define SND_TONE 0x02
++#define SND_MAX 0x07
++#define SND_CNT (SND_MAX+1)
++
++#endif
diff --git a/package/boot/uboot-sunxi/patches/010-sunxi-support-smta.patch b/package/boot/uboot-sunxi/patches/010-sunxi-support-smta.patch
deleted file mode 100644
index 87d3815..0000000
--- a/package/boot/uboot-sunxi/patches/010-sunxi-support-smta.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile
-index dfb0a3e..7a6a3cc 100644
---- a/arch/arm/cpu/armv7/sunxi/Makefile
-+++ b/arch/arm/cpu/armv7/sunxi/Makefile
-@@ -33,6 +33,7 @@ obj-$(CONFIG_MACH_SUN8I) += clock_sun6i.o
- endif
- obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o
- obj-$(CONFIG_MACH_SUN6I) += tzpc.o
-+obj-$(CONFIG_MACH_SUN8I) += tzpc.o
-
- obj-$(CONFIG_AXP152_POWER) += pmic_bus.o
- obj-$(CONFIG_AXP209_POWER) += pmic_bus.o
-diff --git a/arch/arm/cpu/armv7/sunxi/tzpc.c b/arch/arm/cpu/armv7/sunxi/tzpc.c
-index 5c9c69b..6c8a0fd 100644
---- a/arch/arm/cpu/armv7/sunxi/tzpc.c
-+++ b/arch/arm/cpu/armv7/sunxi/tzpc.c
-@@ -13,6 +13,15 @@ void tzpc_init(void)
- {
- struct sunxi_tzpc *tzpc = (struct sunxi_tzpc *)SUNXI_TZPC_BASE;
-
-+#ifdef CONFIG_MACH_SUN6I
- /* Enable non-secure access to the RTC */
-- writel(SUNXI_TZPC_DECPORT0_RTC, &tzpc->decport0_set);
-+ writel(SUN6I_TZPC_DECPORT0_RTC, &tzpc->decport0_set);
-+#endif
-+
-+#ifdef CONFIG_MACH_SUN8I_H3
-+ /* Enable non-secure access to all peripherals */
-+ writel(SUN8I_H3_TZPC_DECPORT0_ALL, &tzpc->decport0_set);
-+ writel(SUN8I_H3_TZPC_DECPORT1_ALL, &tzpc->decport1_set);
-+ writel(SUN8I_H3_TZPC_DECPORT2_ALL, &tzpc->decport2_set);
-+#endif
- }
-diff --git a/arch/arm/include/asm/arch-sunxi/tzpc.h b/arch/arm/include/asm/arch-sunxi/tzpc.h
-index ba4d43b..95c55cd 100644
---- a/arch/arm/include/asm/arch-sunxi/tzpc.h
-+++ b/arch/arm/include/asm/arch-sunxi/tzpc.h
-@@ -13,10 +13,21 @@ struct sunxi_tzpc {
- u32 decport0_status; /* 0x04 Status of decode protection port 0 */
- u32 decport0_set; /* 0x08 Set decode protection port 0 */
- u32 decport0_clear; /* 0x0c Clear decode protection port 0 */
-+ /* For A80 and later SoCs */
-+ u32 decport1_status; /* 0x10 Status of decode protection port 1 */
-+ u32 decport1_set; /* 0x14 Set decode protection port 1 */
-+ u32 decport1_clear; /* 0x18 Clear decode protection port 1 */
-+ u32 decport2_status; /* 0x1c Status of decode protection port 2 */
-+ u32 decport2_set; /* 0x20 Set decode protection port 2 */
-+ u32 decport2_clear; /* 0x24 Clear decode protection port 2 */
- };
- #endif
-
--#define SUNXI_TZPC_DECPORT0_RTC (1 << 1)
-+#define SUN6I_TZPC_DECPORT0_RTC (1 << 1)
-+
-+#define SUN8I_H3_TZPC_DECPORT0_ALL 0xbe
-+#define SUN8I_H3_TZPC_DECPORT1_ALL 0xff
-+#define SUN8I_H3_TZPC_DECPORT2_ALL 0x7f
-
- void tzpc_init(void);
-
diff --git a/package/boot/uboot-sunxi/patches/011-dt-sync-dts-files-with-kernel.patch b/package/boot/uboot-sunxi/patches/011-dt-sync-dts-files-with-kernel.patch
new file mode 100644
index 0000000..1b7a059
--- /dev/null
+++ b/package/boot/uboot-sunxi/patches/011-dt-sync-dts-files-with-kernel.patch
@@ -0,0 +1,7354 @@
+From 80e5f83c0fc4bf42110cc55ce671ad7ddc7b08a4 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Mon, 14 Mar 2016 17:37:09 +0100
+Subject: [PATCH] sunxi: Sync dts files with the upstream kernel
+
+Sync dts files with the upstream kernel including
+changes queued for 4.6:
+
+https://git.kernel.org/cgit/linux/kernel/git/mripard/linux.git/commit/?h=sunxi/dt-for-4.6
+
+Note this adds a number of new unused board dts files. I've asked the
+authors of the kernel commits adding these to submit a matching defconfig
+to u-boot.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+Acked-by: Ian Campbell <ijc@hellion.org.uk>
+---
+ arch/arm/dts/Makefile | 8 +-
+ arch/arm/dts/axp22x.dtsi | 145 ++++++++++++
+ arch/arm/dts/sun4i-a10-a1000.dts | 4 +
+ arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts | 22 ++
+ arch/arm/dts/sun4i-a10-cubieboard.dts | 4 +
+ arch/arm/dts/sun4i-a10-gemei-g9.dts | 63 +++++-
+ arch/arm/dts/sun4i-a10-inet1.dts | 48 ++++
+ arch/arm/dts/sun4i-a10-inet97fv2.dts | 127 ++++++++++-
+ arch/arm/dts/sun4i-a10-inet9f-rev03.dts | 181 +++++++++++++++
+ arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts | 86 +------
+ arch/arm/dts/sun4i-a10-jesurun-q5.dts | 15 ++
+ arch/arm/dts/sun4i-a10-marsboard.dts | 23 ++
+ arch/arm/dts/sun4i-a10-mk802.dts | 37 +++
+ arch/arm/dts/sun4i-a10-olinuxino-lime.dts | 12 +
+ arch/arm/dts/sun4i-a10-pcduino.dts | 58 ++++-
+ arch/arm/dts/sun4i-a10-pcduino2.dts | 78 +++++++
+ arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts | 69 ++++++
+ arch/arm/dts/sun4i-a10.dtsi | 153 +++++++++++--
+ arch/arm/dts/sun5i-a10s-auxtek-t004.dts | 14 ++
+ arch/arm/dts/sun5i-a10s-olinuxino-micro.dts | 2 +-
+ arch/arm/dts/sun5i-a13-empire-electronix-d709.dts | 19 +-
+ arch/arm/dts/sun5i-a13-inet-98v-rev2.dts | 26 +--
+ arch/arm/dts/sun5i-a13-utoo-p66.dts | 30 +++
+ arch/arm/dts/sun5i-q8-common.dtsi | 10 +
+ arch/arm/dts/sun5i-r8-chip.dts | 47 +++-
+ arch/arm/dts/sun5i.dtsi | 31 +++
+ arch/arm/dts/sun6i-a31-colombus.dts | 24 ++
+ arch/arm/dts/sun6i-a31-hummingbird.dts | 132 ++++++-----
+ arch/arm/dts/sun6i-a31.dtsi | 65 +++++-
+ arch/arm/dts/sun6i-a31s-primo81.dts | 247 ++++++++++++++++++++-
+ arch/arm/dts/sun6i-a31s-sina31s-core.dtsi | 142 ++++++++++++
+ arch/arm/dts/sun6i-a31s-sina31s.dts | 153 +++++++++++++
+ .../arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts | 205 +++++++++++++++++
+ arch/arm/dts/sun7i-a20-bananapi.dts | 78 ++++++-
+ arch/arm/dts/sun7i-a20-cubieboard2.dts | 23 ++
+ arch/arm/dts/sun7i-a20-cubietruck.dts | 4 +
+ arch/arm/dts/sun7i-a20-icnova-swac.dts | 169 ++++++++++++++
+ arch/arm/dts/sun7i-a20-itead-ibox.dts | 125 +++++++++++
+ arch/arm/dts/sun7i-a20-lamobo-r1.dts | 10 -
+ arch/arm/dts/sun7i-a20-mk808c.dts | 39 ++++
+ arch/arm/dts/sun7i-a20-olimex-som-evb.dts | 95 ++++++--
+ arch/arm/dts/sun7i-a20-olinuxino-lime.dts | 12 +
+ arch/arm/dts/sun7i-a20-olinuxino-lime2.dts | 47 ++++
+ arch/arm/dts/sun7i-a20-olinuxino-micro.dts | 6 +
+ arch/arm/dts/sun7i-a20-orangepi-mini.dts | 33 +++
+ arch/arm/dts/sun7i-a20-orangepi.dts | 29 +++
+ arch/arm/dts/sun7i-a20-pcduino3-nano.dts | 69 +++++-
+ arch/arm/dts/sun7i-a20-pcduino3.dts | 58 ++++-
+ arch/arm/dts/sun7i-a20-wexler-tab7200.dts | 90 +++++++-
+ arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts | 187 +++++++++++++++-
+ arch/arm/dts/sun7i-a20.dtsi | 113 +++++++++-
+ arch/arm/dts/sun8i-a23-a33.dtsi | 71 ++++--
+ arch/arm/dts/sun8i-a23-gt90h-v4.dts | 120 +++++++++-
+ arch/arm/dts/sun8i-a23.dtsi | 25 +++
+ arch/arm/dts/sun8i-a33-sinlinx-sina33.dts | 83 ++++++-
+ arch/arm/dts/sun8i-a33.dtsi | 45 ++++
+ arch/arm/dts/sun8i-a83t-cubietruck-plus.dts | 65 ++++++
+ arch/arm/dts/sun8i-a83t.dtsi | 125 +++++------
+ arch/arm/dts/sun8i-h3-orangepi-pc.dts | 69 ++++++
+ arch/arm/dts/sun8i-h3-orangepi-plus.dts | 63 ++++++
+ arch/arm/dts/sun8i-h3.dtsi | 189 +++++++++++-----
+ arch/arm/dts/sun8i-q8-common.dtsi | 96 +++++++-
+ arch/arm/dts/sun9i-a80-cubieboard4.dts | 36 +++
+ arch/arm/dts/sun9i-a80-optimus.dts | 48 ++--
+ arch/arm/dts/sun9i-a80.dtsi | 204 +++++++++++++++--
+ arch/arm/dts/sunxi-itead-core-common.dtsi | 136 ++++++++++++
+ arch/arm/dts/sunxi-q8-common.dtsi | 6 +
+ 67 files changed, 4351 insertions(+), 497 deletions(-)
+ create mode 100644 arch/arm/dts/axp22x.dtsi
+ create mode 100644 arch/arm/dts/sun4i-a10-pcduino2.dts
+ create mode 100644 arch/arm/dts/sun6i-a31s-sina31s-core.dtsi
+ create mode 100644 arch/arm/dts/sun6i-a31s-sina31s.dts
+ create mode 100644 arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
+ create mode 100644 arch/arm/dts/sun7i-a20-icnova-swac.dts
+ create mode 100644 arch/arm/dts/sun7i-a20-itead-ibox.dts
+ create mode 100644 arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
+ create mode 100644 arch/arm/dts/sunxi-itead-core-common.dtsi
+
+diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
+index 578038b..0cea4b4 100644
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -126,6 +126,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
+ sun4i-a10-mk802ii.dtb \
+ sun4i-a10-olinuxino-lime.dtb \
+ sun4i-a10-pcduino.dtb \
++ sun4i-a10-pcduino2.dtb \
+ sun4i-a10-pov-protab2-ips9.dtb
+ dtb-$(CONFIG_MACH_SUN5I) += \
+ sun5i-a10s-auxtek-t003.dtb \
+@@ -154,7 +155,9 @@ dtb-$(CONFIG_MACH_SUN6I) += \
+ sun6i-a31-mixtile-loftq.dtb \
+ sun6i-a31s-cs908.dtb \
+ sun6i-a31s-primo81.dtb \
+- sun6i-a31s-sinovoip-bpi-m2.dtb
++ sun6i-a31s-sina31s.dtb \
++ sun6i-a31s-sinovoip-bpi-m2.dtb \
++ sun6i-a31s-yones-toptech-bs1078-v2.dtb
+ dtb-$(CONFIG_MACH_SUN7I) += \
+ sun7i-a20-ainol-aw1.dtb \
+ sun7i-a20-bananapi.dtb \
+@@ -163,6 +166,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \
+ sun7i-a20-cubietruck.dtb \
+ sun7i-a20-hummingbird.dtb \
+ sun7i-a20-i12-tvbox.dtb \
++ sun7i-a20-icnova-swac.dtb \
++ sun7i-a20-itead-ibox.dtb \
+ sun7i-a20-lamobo-r1.dtb \
+ sun7i-a20-m3.dtb \
+ sun7i-a20-m5.dtb \
+@@ -189,6 +194,7 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \
+ sun8i-a33-sinlinx-sina33.dtb
+ dtb-$(CONFIG_MACH_SUN8I_A83T) += \
+ sun8i-a83t-allwinner-h8homlet-v2.dtb \
++ sun8i-a83t-cubietruck-plus.dtb \
+ sun8i-a83t-sinovoip-bpi-m3.dtb
+ dtb-$(CONFIG_MACH_SUN8I_H3) += \
+ sun8i-h3-orangepi-pc.dtb \
+diff --git a/arch/arm/dts/axp22x.dtsi b/arch/arm/dts/axp22x.dtsi
+new file mode 100644
+index 0000000..0cfec50
+--- /dev/null
++++ b/arch/arm/dts/axp22x.dtsi
+@@ -0,0 +1,145 @@
++/*
++ * Copyright 2015 Chen-Yu Tsai
++ *
++ * Chen-Yu Tsai <wens@csie.org>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/*
++ * AXP221/221s/223 Integrated Power Management Chip
++ * http://www.x-powers.com/product/AXP22X.php
++ * http://dl.linux-sunxi.org/AXP/AXP221%20Datasheet%20V1.2%2020130326%20.pdf
++ */
++
++&axp22x {
++ interrupt-controller;
++ #interrupt-cells = <1>;
++
++ regulators {
++ /* Default work frequency for buck regulators */
++ x-powers,dcdc-freq = <3000>;
++
++ reg_dcdc1: dcdc1 {
++ regulator-name = "dcdc1";
++ };
++
++ reg_dcdc2: dcdc2 {
++ regulator-name = "dcdc2";
++ };
++
++ reg_dcdc3: dcdc3 {
++ regulator-name = "dcdc3";
++ };
++
++ reg_dcdc4: dcdc4 {
++ regulator-name = "dcdc4";
++ };
++
++ reg_dcdc5: dcdc5 {
++ regulator-name = "dcdc5";
++ };
++
++ reg_dc1sw: dc1sw {
++ regulator-name = "dc1sw";
++ };
++
++ reg_dc5ldo: dc5ldo {
++ regulator-name = "dc5ldo";
++ };
++
++ reg_aldo1: aldo1 {
++ regulator-name = "aldo1";
++ };
++
++ reg_aldo2: aldo2 {
++ regulator-name = "aldo2";
++ };
++
++ reg_aldo3: aldo3 {
++ regulator-name = "aldo3";
++ };
++
++ reg_dldo1: dldo1 {
++ regulator-name = "dldo1";
++ };
++
++ reg_dldo2: dldo2 {
++ regulator-name = "dldo2";
++ };
++
++ reg_dldo3: dldo3 {
++ regulator-name = "dldo3";
++ };
++
++ reg_dldo4: dldo4 {
++ regulator-name = "dldo4";
++ };
++
++ reg_eldo1: eldo1 {
++ regulator-name = "eldo1";
++ };
++
++ reg_eldo2: eldo2 {
++ regulator-name = "eldo2";
++ };
++
++ reg_eldo3: eldo3 {
++ regulator-name = "eldo3";
++ };
++
++ reg_ldo_io0: ldo_io0 {
++ regulator-name = "ldo_io0";
++ status = "disabled";
++ };
++
++ reg_ldo_io1: ldo_io1 {
++ regulator-name = "ldo_io1";
++ status = "disabled";
++ };
++
++ reg_rtc_ldo: rtc_ldo {
++ /* RTC_LDO is a fixed, always-on regulator */
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "rtc_ldo";
++ };
++ };
++};
+diff --git a/arch/arm/dts/sun4i-a10-a1000.dts b/arch/arm/dts/sun4i-a10-a1000.dts
+index 2630d78..97570cb 100644
+--- a/arch/arm/dts/sun4i-a10-a1000.dts
++++ b/arch/arm/dts/sun4i-a10-a1000.dts
+@@ -93,6 +93,10 @@
+ status = "okay";
+ };
+
++&codec {
++ status = "okay";
++};
++
+ &ehci0 {
+ status = "okay";
+ };
+diff --git a/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts
+index 1430568..023b03e 100644
+--- a/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts
++++ b/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts
+@@ -45,6 +45,7 @@
+ #include "sunxi-common-regulators.dtsi"
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/input/input.h>
++#include <dt-bindings/interrupt-controller/irq.h>
+
+ / {
+ model = "Chuwi V7 CW0825";
+@@ -78,6 +79,27 @@
+ };
+ };
+
++&i2c1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c1_pins_a>;
++ status = "okay";
++};
++
++&i2c2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c2_pins_a>;
++ status = "okay";
++
++ ft5306de4: touchscreen@38 {
++ compatible = "edt,edt-ft5406";
++ reg = <0x38>;
++ interrupt-parent = <&pio>;
++ interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
++ touchscreen-size-x = <1024>;
++ touchscreen-size-y = <768>;
++ };
++};
++
+ &lradc {
+ vref-supply = <&reg_vcc3v0>;
+ status = "okay";
+diff --git a/arch/arm/dts/sun4i-a10-cubieboard.dts b/arch/arm/dts/sun4i-a10-cubieboard.dts
+index 046a84d..710e2ef 100644
+--- a/arch/arm/dts/sun4i-a10-cubieboard.dts
++++ b/arch/arm/dts/sun4i-a10-cubieboard.dts
+@@ -83,6 +83,10 @@
+ status = "okay";
+ };
+
++&codec {
++ status = "okay";
++};
++
+ &cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+ };
+diff --git a/arch/arm/dts/sun4i-a10-gemei-g9.dts b/arch/arm/dts/sun4i-a10-gemei-g9.dts
+index 570754d..ac64781 100644
+--- a/arch/arm/dts/sun4i-a10-gemei-g9.dts
++++ b/arch/arm/dts/sun4i-a10-gemei-g9.dts
+@@ -47,6 +47,7 @@
+ #include "sunxi-common-regulators.dtsi"
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/input/input.h>
++#include <dt-bindings/interrupt-controller/irq.h>
+
+ / {
+ model = "Gemei G9 Tablet";
+@@ -64,12 +65,22 @@
+ /*
+ * TODO:
+ * 2x cameras via CSI
+- * bma250 IRQs
+ * AXP battery management
+ * NAND
+ * OTG
+ * Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48
+ */
++&codec {
++ /* PH15 controls power to external amplifier (ft2012q) */
++ pinctrl-names = "default";
++ pinctrl-0 = <&codec_pa_pin>;
++ allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>;
++ status = "okay";
++};
++
++&cpu0 {
++ cpu-supply = <&reg_dcdc2>;
++};
+
+ &ehci0 {
+ status = "okay";
+@@ -85,15 +96,13 @@
+ status = "okay";
+
+ axp209: pmic@34 {
+- compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+-
+- interrupt-controller;
+- #interrupt-cells = <1>;
+ };
+ };
+
++#include "axp209.dtsi"
++
+ &i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+@@ -103,17 +112,13 @@
+ bma250@18 {
+ compatible = "bosch,bma250";
+ reg = <0x18>;
+-
+- /*
+- * TODO: interrupt pins:
+- * int1 - PH00
+- * int2 - PI10
+- */
++ interrupt-parent = <&pio>;
++ interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH00 / EINT0 */
+ };
+ };
+
+ &lradc {
+- vref-supply = <&reg_vcc3v0>;
++ vref-supply = <&reg_ldo2>;
+
+ status = "okay";
+
+@@ -149,6 +154,40 @@
+ status = "okay";
+ };
+
++&pio {
++ codec_pa_pin: codec_pa_pin@0 {
++ allwinner,pins = "PH15";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++};
++
++&reg_dcdc2 {
++ regulator-always-on;
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-cpu";
++};
++
++&reg_dcdc3 {
++ regulator-always-on;
++ regulator-min-microvolt = <1250000>;
++ regulator-max-microvolt = <1250000>;
++ regulator-name = "vdd-int-dll";
++};
++
++&reg_ldo1 {
++ regulator-name = "vdd-rtc";
++};
++
++&reg_ldo2 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "avcc";
++};
++
+ &reg_usb1_vbus {
+ status = "okay";
+ };
+diff --git a/arch/arm/dts/sun4i-a10-inet1.dts b/arch/arm/dts/sun4i-a10-inet1.dts
+index 487ce63..e09053b 100644
+--- a/arch/arm/dts/sun4i-a10-inet1.dts
++++ b/arch/arm/dts/sun4i-a10-inet1.dts
+@@ -47,6 +47,7 @@
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
++#include <dt-bindings/pwm/pwm.h>
+
+ / {
+ model = "iNet-1";
+@@ -56,11 +57,25 @@
+ serial0 = &uart0;
+ };
+
++ backlight: backlight {
++ compatible = "pwm-backlight";
++ pinctrl-names = "default";
++ pinctrl-0 = <&bl_en_pin_inet>;
++ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
++ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
++ default-brightness-level = <8>;
++ enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
++ };
++
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+ };
+
++&codec {
++ status = "okay";
++};
++
+ &cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+ };
+@@ -104,6 +119,19 @@
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
++
++ ft5x: touchscreen@38 {
++ compatible = "edt,edt-ft5406";
++ reg = <0x38>;
++ interrupt-parent = <&pio>;
++ interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&touchscreen_wake_pin>;
++ wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */
++ touchscreen-size-x = <600>;
++ touchscreen-size-y = <1024>;
++ touchscreen-swapped-x-y;
++ };
+ };
+
+ &lradc {
+@@ -151,6 +179,20 @@
+ };
+
+ &pio {
++ bl_en_pin_inet: bl_en_pin@0 {
++ allwinner,pins = "PH7";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
++ touchscreen_wake_pin: touchscreen_wake_pin@0 {
++ allwinner,pins = "PB13";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+@@ -166,6 +208,12 @@
+ };
+ };
+
++&pwm {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pwm0_pins_a>;
++ status = "okay";
++};
++
+ &reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+diff --git a/arch/arm/dts/sun4i-a10-inet97fv2.dts b/arch/arm/dts/sun4i-a10-inet97fv2.dts
+index 6c927a8..04b0d2d 100644
+--- a/arch/arm/dts/sun4i-a10-inet97fv2.dts
++++ b/arch/arm/dts/sun4i-a10-inet97fv2.dts
+@@ -47,6 +47,8 @@
+ #include "sunxi-common-regulators.dtsi"
+
+ #include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/interrupt-controller/irq.h>
+
+ / {
+ model = "INet-97F Rev 02";
+@@ -61,8 +63,8 @@
+ };
+ };
+
+-&ehci0 {
+- status = "okay";
++&cpu0 {
++ cpu-supply = <&reg_dcdc2>;
+ };
+
+ &ehci1 {
+@@ -75,12 +77,71 @@
+ status = "okay";
+
+ axp209: pmic@34 {
+- compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
++ };
++};
++
++#include "axp209.dtsi"
++
++&i2c1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c1_pins_a>;
++ status = "okay";
++};
++
++&i2c2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c2_pins_a>;
++ status = "okay";
++
++ ft5406ee8: touchscreen@38 {
++ compatible = "edt,edt-ft5406";
++ reg = <0x38>;
++ interrupt-parent = <&pio>;
++ interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
++ touchscreen-size-x = <800>;
++ touchscreen-size-y = <480>;
++ };
++};
++
++&lradc {
++ vref-supply = <&reg_ldo2>;
++ status = "okay";
++
++ button@200 {
++ label = "Menu";
++ linux,code = <KEY_MENU>;
++ channel = <0>;
++ voltage = <200000>;
++ };
++
++ button@600 {
++ label = "Volume Up";
++ linux,code = <KEY_VOLUMEUP>;
++ channel = <0>;
++ voltage = <600000>;
++ };
+
+- interrupt-controller;
+- #interrupt-cells = <1>;
++ button@800 {
++ label = "Volume Down";
++ linux,code = <KEY_VOLUMEDOWN>;
++ channel = <0>;
++ voltage = <800000>;
++ };
++
++ button@1000 {
++ label = "Home";
++ linux,code = <KEY_HOMEPAGE>;
++ channel = <0>;
++ voltage = <1000000>;
++ };
++
++ button@1200 {
++ label = "Esc";
++ linux,code = <KEY_ESC>;
++ channel = <0>;
++ voltage = <1200000>;
+ };
+ };
+
+@@ -94,15 +155,52 @@
+ status = "okay";
+ };
+
+-&ohci0 {
++&otg_sram {
+ status = "okay";
+ };
+
+-&ohci1 {
+- status = "okay";
++&pio {
++ usb0_id_detect_pin: usb0_id_detect_pin@0 {
++ allwinner,pins = "PH4";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
++
++ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
++ allwinner,pins = "PH5";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
++ };
++};
++
++&reg_dcdc2 {
++ regulator-always-on;
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-cpu";
+ };
+
+-&reg_usb1_vbus {
++&reg_dcdc3 {
++ regulator-always-on;
++ regulator-min-microvolt = <1250000>;
++ regulator-max-microvolt = <1250000>;
++ regulator-name = "vdd-int-dll";
++};
++
++&reg_ldo1 {
++ regulator-name = "vdd-rtc";
++};
++
++&reg_ldo2 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "avcc";
++};
++
++&reg_usb0_vbus {
+ status = "okay";
+ };
+
+@@ -116,8 +214,17 @@
+ status = "okay";
+ };
+
++&usb_otg {
++ dr_mode = "otg";
++ status = "okay";
++};
++
+ &usbphy {
+- usb1_vbus-supply = <&reg_usb1_vbus>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
++ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
++ usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
++ usb0_vbus-supply = <&reg_usb0_vbus>;
+ usb2_vbus-supply = <&reg_usb2_vbus>;
+ status = "okay";
+ };
+diff --git a/arch/arm/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/dts/sun4i-a10-inet9f-rev03.dts
+index 8446465..bba4f9c 100644
+--- a/arch/arm/dts/sun4i-a10-inet9f-rev03.dts
++++ b/arch/arm/dts/sun4i-a10-inet9f-rev03.dts
+@@ -59,6 +59,159 @@
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
++
++ gpio_keys {
++ compatible = "gpio-keys-polled";
++ pinctrl-names = "default";
++ pinctrl-0 = <&key_pins_inet9f>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ poll-interval = <20>;
++
++ button@0 {
++ label = "Left Joystick Left";
++ linux,code = <ABS_X>;
++ linux,input-type = <EV_ABS>;
++ linux,input-value = <0xffffffff>; /* -1 */
++ gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
++ };
++
++ button@1 {
++ label = "Left Joystick Right";
++ linux,code = <ABS_X>;
++ linux,input-type = <EV_ABS>;
++ linux,input-value = <1>;
++ gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
++ };
++
++ button@2 {
++ label = "Left Joystick Up";
++ linux,code = <ABS_Y>;
++ linux,input-type = <EV_ABS>;
++ linux,input-value = <0xffffffff>; /* -1 */
++ gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
++ };
++
++ button@3 {
++ label = "Left Joystick Down";
++ linux,code = <ABS_Y>;
++ linux,input-type = <EV_ABS>;
++ linux,input-value = <1>;
++ gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
++ };
++
++ button@4 {
++ label = "Right Joystick Left";
++ linux,code = <ABS_Z>;
++ linux,input-type = <EV_ABS>;
++ linux,input-value = <0xffffffff>; /* -1 */
++ gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
++ };
++
++ button@5 {
++ label = "Right Joystick Right";
++ linux,code = <ABS_Z>;
++ linux,input-type = <EV_ABS>;
++ linux,input-value = <1>;
++ gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
++ };
++
++ button@6 {
++ label = "Right Joystick Up";
++ linux,code = <ABS_RZ>;
++ linux,input-type = <EV_ABS>;
++ linux,input-value = <0xffffffff>; /* -1 */
++ gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
++ };
++
++ button@7 {
++ label = "Right Joystick Down";
++ linux,code = <ABS_RZ>;
++ linux,input-type = <EV_ABS>;
++ linux,input-value = <1>;
++ gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
++ };
++
++ button@8 {
++ label = "DPad Left";
++ linux,code = <ABS_HAT0X>;
++ linux,input-type = <EV_ABS>;
++ linux,input-value = <0xffffffff>; /* -1 */
++ gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */
++ };
++
++ button@9 {
++ label = "DPad Right";
++ linux,code = <ABS_HAT0X>;
++ linux,input-type = <EV_ABS>;
++ linux,input-value = <1>;
++ gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
++ };
++
++ button@10 {
++ label = "DPad Up";
++ linux,code = <ABS_HAT0Y>;
++ linux,input-type = <EV_ABS>;
++ linux,input-value = <0xffffffff>; /* -1 */
++ gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
++ };
++
++ button@11 {
++ label = "DPad Down";
++ linux,code = <ABS_HAT0Y>;
++ linux,input-type = <EV_ABS>;
++ linux,input-value = <1>;
++ gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
++ };
++
++ button@12 {
++ label = "Button X";
++ linux,code = <BTN_X>;
++ gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */
++ };
++
++ button@13 {
++ label = "Button Y";
++ linux,code = <BTN_Y>;
++ gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */
++ };
++
++ button@14 {
++ label = "Button A";
++ linux,code = <BTN_A>;
++ gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
++ };
++
++ button@15 {
++ label = "Button B";
++ linux,code = <BTN_B>;
++ gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */
++ };
++
++ button@16 {
++ label = "Select Button";
++ linux,code = <BTN_SELECT>;
++ gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
++ };
++
++ button@17 {
++ label = "Start Button";
++ linux,code = <BTN_START>;
++ gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
++ };
++
++ button@18 {
++ label = "Top Left Button";
++ linux,code = <BTN_TL>;
++ gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
++ };
++
++ button@19 {
++ label = "Top Right Button";
++ linux,code = <BTN_TR>;
++ gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */
++ };
++ };
+ };
+
+ &cpu0 {
+@@ -86,12 +239,29 @@
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
++
++ /* Accelerometer */
++ bma250@18 {
++ compatible = "bosch,bma250";
++ reg = <0x18>;
++ interrupt-parent = <&pio>;
++ interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
++ };
+ };
+
+ &i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
++
++ ft5406ee8: touchscreen@38 {
++ compatible = "edt,edt-ft5406";
++ reg = <0x38>;
++ interrupt-parent = <&pio>;
++ interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
++ touchscreen-size-x = <800>;
++ touchscreen-size-y = <480>;
++ };
+ };
+
+ &lradc {
+@@ -149,6 +319,17 @@
+ };
+
+ &pio {
++ key_pins_inet9f: key_pins@0 {
++ allwinner,pins = "PA0", "PA1", "PA3", "PA4",
++ "PA5", "PA6", "PA8", "PA9",
++ "PA11", "PA12", "PA13",
++ "PA14", "PA15", "PA16", "PA17",
++ "PH22", "PH23", "PH24", "PH25", "PH26";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
++
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+diff --git a/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts
+index 985e155..4e798f0 100644
+--- a/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts
++++ b/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts
+@@ -1,5 +1,6 @@
+ /*
+ * Copyright 2015 Josef Gajdusek <atx@atx.name>
++ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+@@ -42,22 +43,11 @@
+
+ /dts-v1/;
+ #include "sun4i-a10.dtsi"
+-#include "sunxi-common-regulators.dtsi"
+-
+-#include <dt-bindings/gpio/gpio.h>
+-#include <dt-bindings/pinctrl/sun4i-a10.h>
++#include "sunxi-itead-core-common.dtsi"
+
+ / {
+ model = "Iteaduino Plus A10";
+ compatible = "itead,iteaduino-plus-a10", "allwinner,sun4i-a10";
+-
+- aliases {
+- serial0 = &uart0;
+- };
+-
+- chosen {
+- stdout-path = "serial0:115200n8";
+- };
+ };
+
+ &ahci {
+@@ -65,18 +55,6 @@
+ status = "okay";
+ };
+
+-&cpu0 {
+- cpu-supply = <&reg_dcdc2>;
+-};
+-
+-&ehci0 {
+- status = "okay";
+-};
+-
+-&ehci1 {
+- status = "okay";
+-};
+-
+ &emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+@@ -89,12 +67,7 @@
+ };
+
+ &i2c0 {
+- pinctrl-names = "default";
+- pinctrl-0 = <&i2c0_pins_a>;
+- status = "okay";
+-
+ axp209: pmic@34 {
+- reg = <0x34>;
+ interrupts = <0>;
+ };
+ };
+@@ -135,68 +108,13 @@
+ status = "okay";
+ };
+
+-&ohci0 {
+- status = "okay";
+-};
+-
+-&ohci1 {
+- status = "okay";
+-};
+-
+ &reg_ahci_5v {
+ status = "okay";
+ };
+
+-#include "axp209.dtsi"
+-
+-&reg_dcdc2 {
+- regulator-always-on;
+- regulator-min-microvolt = <1000000>;
+- regulator-max-microvolt = <1450000>;
+- regulator-name = "vdd-cpu";
+-};
+-
+-&reg_dcdc3 {
+- regulator-always-on;
+- regulator-min-microvolt = <1000000>;
+- regulator-max-microvolt = <1400000>;
+- regulator-name = "vdd-int-dll";
+-};
+-
+-&reg_ldo1 {
+- regulator-name = "vdd-rtc";
+-};
+-
+-&reg_ldo2 {
+- regulator-always-on;
+- regulator-min-microvolt = <3000000>;
+- regulator-max-microvolt = <3000000>;
+- regulator-name = "avcc";
+-};
+-
+-&reg_usb1_vbus {
+- status = "okay";
+-};
+-
+-&reg_usb2_vbus {
+- status = "okay";
+-};
+-
+ &spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>,
+ <&spi0_cs0_pins_a>;
+ status = "okay";
+ };
+-
+-&uart0 {
+- pinctrl-names = "default";
+- pinctrl-0 = <&uart0_pins_a>;
+- status = "okay";
+-};
+-
+-&usbphy {
+- usb1_vbus-supply = <&reg_usb1_vbus>;
+- usb2_vbus-supply = <&reg_usb2_vbus>;
+- status = "okay";
+-};
+diff --git a/arch/arm/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/dts/sun4i-a10-jesurun-q5.dts
+index dc2f2ae..7afc7a6 100644
+--- a/arch/arm/dts/sun4i-a10-jesurun-q5.dts
++++ b/arch/arm/dts/sun4i-a10-jesurun-q5.dts
+@@ -156,6 +156,10 @@
+ status = "okay";
+ };
+
++&otg_sram {
++ status = "okay";
++};
++
+ &pio {
+ emac_power_pin_q5: emac_power_pin@0 {
+ allwinner,pins = "PH19";
+@@ -172,6 +176,11 @@
+ };
+ };
+
++&reg_usb0_vbus {
++ regulator-boot-on;
++ status = "okay";
++};
++
+ &reg_usb1_vbus {
+ status = "okay";
+ };
+@@ -186,7 +195,13 @@
+ status = "okay";
+ };
+
++&usb_otg {
++ dr_mode = "host";
++ status = "okay";
++};
++
+ &usbphy {
++ usb0_vbus-supply = <&reg_usb0_vbus>;
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ usb2_vbus-supply = <&reg_usb2_vbus>;
+ status = "okay";
+diff --git a/arch/arm/dts/sun4i-a10-marsboard.dts b/arch/arm/dts/sun4i-a10-marsboard.dts
+index 02158bc..8e50723 100644
+--- a/arch/arm/dts/sun4i-a10-marsboard.dts
++++ b/arch/arm/dts/sun4i-a10-marsboard.dts
+@@ -91,6 +91,10 @@
+ status = "okay";
+ };
+
++&codec {
++ status = "okay";
++};
++
+ &ehci0 {
+ status = "okay";
+ };
+@@ -154,6 +158,10 @@
+ status = "okay";
+ };
+
++&otg_sram {
++ status = "okay";
++};
++
+ &pio {
+ led_pins_marsboard: led_pins@0 {
+ allwinner,pins = "PB5", "PB6", "PB7", "PB8";
+@@ -161,6 +169,13 @@
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
++
++ usb0_id_detect_pin: usb0_id_detect_pin@0 {
++ allwinner,pins = "PH4";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
+ };
+
+ &reg_usb1_vbus {
+@@ -184,7 +199,15 @@
+ status = "okay";
+ };
+
++&usb_otg {
++ dr_mode = "otg";
++ status = "okay";
++};
++
+ &usbphy {
++ pinctrl-names = "default";
++ pinctrl-0 = <&usb0_id_detect_pin>;
++ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ usb2_vbus-supply = <&reg_usb2_vbus>;
+ status = "okay";
+diff --git a/arch/arm/dts/sun4i-a10-mk802.dts b/arch/arm/dts/sun4i-a10-mk802.dts
+index 3c7eebe..ee46ea8 100644
+--- a/arch/arm/dts/sun4i-a10-mk802.dts
++++ b/arch/arm/dts/sun4i-a10-mk802.dts
+@@ -44,6 +44,7 @@
+ #include "sun4i-a10.dtsi"
+ #include "sunxi-common-regulators.dtsi"
+ #include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+ / {
+ model = "MK802";
+@@ -58,6 +59,10 @@
+ };
+ };
+
++&codec {
++ status = "okay";
++};
++
+ &ehci0 {
+ status = "okay";
+ };
+@@ -80,7 +85,25 @@
+ status = "okay";
+ };
+
++&otg_sram {
++ status = "okay";
++};
++
+ &pio {
++ usb0_id_detect_pin: usb0_id_detect_pin@0 {
++ allwinner,pins = "PH4";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
++ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
++ allwinner,pins = "PH5";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
+ usb2_vbus_pin_mk802: usb2_vbus_pin@0 {
+ allwinner,pins = "PH12";
+ allwinner,function = "gpio_out";
+@@ -89,6 +112,10 @@
+ };
+ };
+
++&reg_usb0_vbus {
++ status = "okay";
++};
++
+ &reg_usb1_vbus {
+ status = "okay";
+ };
+@@ -105,7 +132,17 @@
+ status = "okay";
+ };
+
++&usb_otg {
++ dr_mode = "otg";
++ status = "okay";
++};
++
+ &usbphy {
++ pinctrl-names = "default";
++ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
++ usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
++ usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
++ usb0_vbus-supply = <&reg_usb0_vbus>;
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ usb2_vbus-supply = <&reg_usb2_vbus>;
+ status = "okay";
+diff --git a/arch/arm/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/dts/sun4i-a10-olinuxino-lime.dts
+index 28e32ad..b350448 100644
+--- a/arch/arm/dts/sun4i-a10-olinuxino-lime.dts
++++ b/arch/arm/dts/sun4i-a10-olinuxino-lime.dts
+@@ -124,6 +124,18 @@
+ };
+ };
+
++&i2c1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c1_pins_a>;
++ status = "okay";
++
++ eeprom: eeprom@50 {
++ compatible = "atmel,24c16";
++ reg = <0x50>;
++ pagesize = <16>;
++ };
++};
++
+ &mdio {
+ status = "okay";
+
+diff --git a/arch/arm/dts/sun4i-a10-pcduino.dts b/arch/arm/dts/sun4i-a10-pcduino.dts
+index 4e3e1b9..39034aa 100644
+--- a/arch/arm/dts/sun4i-a10-pcduino.dts
++++ b/arch/arm/dts/sun4i-a10-pcduino.dts
+@@ -104,6 +104,10 @@
+ };
+ };
+
++&cpu0 {
++ cpu-supply = <&reg_dcdc2>;
++};
++
+ &ehci0 {
+ status = "okay";
+ };
+@@ -129,12 +133,8 @@
+ status = "okay";
+
+ axp209: pmic@34 {
+- compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+-
+- interrupt-controller;
+- #interrupt-cells = <1>;
+ };
+ };
+
+@@ -164,6 +164,10 @@
+ status = "okay";
+ };
+
++&otg_sram {
++ status = "okay";
++};
++
+ &pio {
+ led_pins_pcduino: led_pins@0 {
+ allwinner,pins = "PH15", "PH16";
+@@ -178,14 +182,40 @@
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
++
++ usb0_id_detect_pin: usb0_id_detect_pin@0 {
++ allwinner,pins = "PH4";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
+ };
+
+-&reg_usb1_vbus {
+- status = "okay";
++#include "axp209.dtsi"
++
++&reg_dcdc2 {
++ regulator-always-on;
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-cpu";
+ };
+
+-&reg_usb2_vbus {
+- status = "okay";
++&reg_dcdc3 {
++ regulator-always-on;
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-int-dll";
++};
++
++&reg_ldo1 {
++ regulator-name = "vdd-rtc";
++};
++
++&reg_ldo2 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "avcc";
+ };
+
+ &uart0 {
+@@ -194,8 +224,16 @@
+ status = "okay";
+ };
+
++&usb_otg {
++ dr_mode = "otg";
++ status = "okay";
++};
++
+ &usbphy {
+- usb1_vbus-supply = <&reg_usb1_vbus>;
+- usb2_vbus-supply = <&reg_usb2_vbus>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&usb0_id_detect_pin>;
++ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
++ usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */
++ usb2_vbus-supply = <&reg_vcc5v0>; /* USB2 VBUS is always on */
+ status = "okay";
+ };
+diff --git a/arch/arm/dts/sun4i-a10-pcduino2.dts b/arch/arm/dts/sun4i-a10-pcduino2.dts
+new file mode 100644
+index 0000000..de483a1
+--- /dev/null
++++ b/arch/arm/dts/sun4i-a10-pcduino2.dts
+@@ -0,0 +1,78 @@
++/*
++ * Copyright 2015 Siarhei Siamashka <siarhei.siamashka@gmail.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/*
++ * The LinkSprite pcDuino2 board is almost identical to the older
++ * LinkSprite pcDuino1 board. The only software visible difference
++ * is that the pcDuino2 board got a USB VBUS voltage regulator, which
++ * is controlled by the PD2 pin (pulled-up by default). Also one of
++ * the USB host ports has been replaced with a USB WIFI chip.
++ */
++
++#include "sun4i-a10-pcduino.dts"
++
++/ {
++ model = "LinkSprite pcDuino2";
++ compatible = "linksprite,a10-pcduino2", "allwinner,sun4i-a10";
++};
++
++&pio {
++ usb2_vbus_pin_pcduino2: usb2_vbus_pin@0 {
++ allwinner,pins = "PD2";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++};
++
++&reg_usb2_vbus {
++ pinctrl-names = "default";
++ pinctrl-0 = <&usb2_vbus_pin_pcduino2>;
++ gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>;
++ status = "okay";
++};
++
++&usbphy {
++ usb1_vbus-supply = <&reg_vcc3v3>; /* USB WIFI is always on */
++ usb2_vbus-supply = <&reg_usb2_vbus>;
++ status = "okay";
++};
+diff --git a/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts
+index 223515e..ea90634 100644
+--- a/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts
++++ b/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts
+@@ -47,6 +47,7 @@
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
++#include <dt-bindings/pwm/pwm.h>
+
+ / {
+ model = "Point of View Protab2-IPS9";
+@@ -56,11 +57,28 @@
+ serial0 = &uart0;
+ };
+
++ backlight: backlight {
++ compatible = "pwm-backlight";
++ pinctrl-names = "default";
++ pinctrl-0 = <&bl_en_pin_protab>;
++ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
++ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
++ default-brightness-level = <8>;
++ enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
++ };
++
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+ };
+
++&codec {
++ pinctrl-names = "default";
++ pinctrl-0 = <&codec_pa_pin>;
++ allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
++ status = "okay";
++};
++
+ &cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+ };
+@@ -86,12 +104,36 @@
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
++
++ /* Accelerometer */
++ bma250@18 {
++ compatible = "bosch,bma250";
++ reg = <0x18>;
++ interrupt-parent = <&pio>;
++ interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
++ };
+ };
+
+ &i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
++
++ pixcir_ts@5c {
++ pinctrl-names = "default";
++ pinctrl-0 = <&touchscreen_pins>;
++ compatible = "pixcir,pixcir_tangoc";
++ reg = <0x5c>;
++ interrupt-parent = <&pio>;
++ interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
++ attb-gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
++ enable-gpios = <&pio 0 5 GPIO_ACTIVE_LOW>;
++ wake-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
++ touchscreen-size-x = <1024>;
++ touchscreen-size-y = <768>;
++ touchscreen-inverted-x;
++ touchscreen-inverted-y;
++ };
+ };
+
+ &lradc {
+@@ -128,6 +170,27 @@
+ };
+
+ &pio {
++ bl_en_pin_protab: bl_en_pin@0 {
++ allwinner,pins = "PH7";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
++ codec_pa_pin: codec_pa_pin@0 {
++ allwinner,pins = "PH15";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
++ touchscreen_pins: touchscreen_pins@0 {
++ allwinner,pins = "PA5", "PB13";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+@@ -143,6 +206,12 @@
+ };
+ };
+
++&pwm {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pwm0_pins_a>;
++ status = "okay";
++};
++
+ &reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+diff --git a/arch/arm/dts/sun4i-a10.dtsi b/arch/arm/dts/sun4i-a10.dtsi
+index 463bacd..2c8f5e6 100644
+--- a/arch/arm/dts/sun4i-a10.dtsi
++++ b/arch/arm/dts/sun4i-a10.dtsi
+@@ -45,6 +45,7 @@
+
+ #include <dt-bindings/thermal/thermal.h>
+
++#include <dt-bindings/clock/sun4i-a10-pll2.h>
+ #include <dt-bindings/dma/sun4i-a10.h>
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
+
+@@ -65,7 +66,7 @@
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0-hdmi";
+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+- <&ahb_gates 44>;
++ <&ahb_gates 44>, <&dram_gates 26>;
+ status = "disabled";
+ };
+
+@@ -74,7 +75,8 @@
+ "simple-framebuffer";
+ allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+- <&ahb_gates 44>, <&ahb_gates 46>;
++ <&ahb_gates 44>, <&ahb_gates 46>,
++ <&dram_gates 25>, <&dram_gates 26>;
+ status = "disabled";
+ };
+
+@@ -83,7 +85,8 @@
+ "simple-framebuffer";
+ allwinner,pipeline = "de_fe0-de_be0-lcd0";
+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
+- <&ahb_gates 46>;
++ <&ahb_gates 46>, <&dram_gates 25>,
++ <&dram_gates 26>;
+ status = "disabled";
+ };
+
+@@ -92,7 +95,8 @@
+ "simple-framebuffer";
+ allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
+ clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
+- <&ahb_gates 44>, <&ahb_gates 46>;
++ <&ahb_gates 44>, <&ahb_gates 46>,
++ <&dram_gates 25>, <&dram_gates 26>;
+ status = "disabled";
+ };
+ };
+@@ -195,6 +199,15 @@
+ clock-output-names = "pll1";
+ };
+
++ pll2: clk@01c20008 {
++ #clock-cells = <1>;
++ compatible = "allwinner,sun4i-a10-pll2-clk";
++ reg = <0x01c20008 0x8>;
++ clocks = <&osc24M>;
++ clock-output-names = "pll2-1x", "pll2-2x",
++ "pll2-4x", "pll2-8x";
++ };
++
+ pll4: clk@01c20018 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-pll1-clk";
+@@ -241,6 +254,7 @@
+ compatible = "allwinner,sun4i-a10-axi-gates-clk";
+ reg = <0x01c2005c 0x4>;
+ clocks = <&axi>;
++ clock-indices = <0>;
+ clock-output-names = "axi_dram";
+ };
+
+@@ -257,17 +271,36 @@
+ compatible = "allwinner,sun4i-a10-ahb-gates-clk";
+ reg = <0x01c20060 0x8>;
+ clocks = <&ahb>;
++ clock-indices = <0>, <1>,
++ <2>, <3>,
++ <4>, <5>, <6>,
++ <7>, <8>, <9>,
++ <10>, <11>, <12>,
++ <13>, <14>, <16>,
++ <17>, <18>, <20>,
++ <21>, <22>, <23>,
++ <24>, <25>, <26>,
++ <32>, <33>, <34>,
++ <35>, <36>, <37>,
++ <40>, <41>, <43>,
++ <44>, <45>,
++ <46>, <47>,
++ <50>, <52>;
+ clock-output-names = "ahb_usb0", "ahb_ehci0",
+- "ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss",
+- "ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1",
+- "ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand",
+- "ahb_sdram", "ahb_ace", "ahb_emac", "ahb_ts",
+- "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3",
+- "ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve",
+- "ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0",
+- "ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi",
+- "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
+- "ahb_de_fe1", "ahb_mp", "ahb_mali400";
++ "ahb_ohci0", "ahb_ehci1",
++ "ahb_ohci1", "ahb_ss", "ahb_dma",
++ "ahb_bist", "ahb_mmc0", "ahb_mmc1",
++ "ahb_mmc2", "ahb_mmc3", "ahb_ms",
++ "ahb_nand", "ahb_sdram", "ahb_ace",
++ "ahb_emac", "ahb_ts", "ahb_spi0",
++ "ahb_spi1", "ahb_spi2", "ahb_spi3",
++ "ahb_pata", "ahb_sata", "ahb_gps",
++ "ahb_ve", "ahb_tvd", "ahb_tve0",
++ "ahb_tve1", "ahb_lcd0", "ahb_lcd1",
++ "ahb_csi0", "ahb_csi1", "ahb_hdmi",
++ "ahb_de_be0", "ahb_de_be1",
++ "ahb_de_fe0", "ahb_de_fe1",
++ "ahb_mp", "ahb_mali400";
+ };
+
+ apb0: apb0@01c20054 {
+@@ -283,9 +316,14 @@
+ compatible = "allwinner,sun4i-a10-apb0-gates-clk";
+ reg = <0x01c20068 0x4>;
+ clocks = <&apb0>;
++ clock-indices = <0>, <1>,
++ <2>, <3>,
++ <5>, <6>,
++ <7>, <10>;
+ clock-output-names = "apb0_codec", "apb0_spdif",
+- "apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0",
+- "apb0_ir1", "apb0_keypad";
++ "apb0_ac97", "apb0_iis",
++ "apb0_pio", "apb0_ir0",
++ "apb0_ir1", "apb0_keypad";
+ };
+
+ apb1: clk@01c20058 {
+@@ -301,12 +339,22 @@
+ compatible = "allwinner,sun4i-a10-apb1-gates-clk";
+ reg = <0x01c2006c 0x4>;
+ clocks = <&apb1>;
++ clock-indices = <0>, <1>,
++ <2>, <4>,
++ <5>, <6>,
++ <7>, <16>,
++ <17>, <18>,
++ <19>, <20>,
++ <21>, <22>,
++ <23>;
+ clock-output-names = "apb1_i2c0", "apb1_i2c1",
+- "apb1_i2c2", "apb1_can", "apb1_scr",
+- "apb1_ps20", "apb1_ps21", "apb1_uart0",
+- "apb1_uart1", "apb1_uart2", "apb1_uart3",
+- "apb1_uart4", "apb1_uart5", "apb1_uart6",
+- "apb1_uart7";
++ "apb1_i2c2", "apb1_can",
++ "apb1_scr", "apb1_ps20",
++ "apb1_ps21", "apb1_uart0",
++ "apb1_uart1", "apb1_uart2",
++ "apb1_uart3", "apb1_uart4",
++ "apb1_uart5", "apb1_uart6",
++ "apb1_uart7";
+ };
+
+ nand_clk: clk@01c20080 {
+@@ -446,6 +494,48 @@
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi3";
+ };
++
++ dram_gates: clk@01c20100 {
++ #clock-cells = <1>;
++ compatible = "allwinner,sun4i-a10-dram-gates-clk";
++ reg = <0x01c20100 0x4>;
++ clocks = <&pll5 0>;
++ clock-indices = <0>,
++ <1>, <2>,
++ <3>,
++ <4>,
++ <5>, <6>,
++ <15>,
++ <24>, <25>,
++ <26>, <27>,
++ <28>, <29>;
++ clock-output-names = "dram_ve",
++ "dram_csi0", "dram_csi1",
++ "dram_ts",
++ "dram_tvd",
++ "dram_tve0", "dram_tve1",
++ "dram_output",
++ "dram_de_fe1", "dram_de_fe0",
++ "dram_de_be0", "dram_de_be1",
++ "dram_de_mp", "dram_ace";
++ };
++
++ ve_clk: clk@01c2013c {
++ #clock-cells = <0>;
++ #reset-cells = <0>;
++ compatible = "allwinner,sun4i-a10-ve-clk";
++ reg = <0x01c2013c 0x4>;
++ clocks = <&pll4>;
++ clock-output-names = "ve";
++ };
++
++ codec_clk: clk@01c20140 {
++ #clock-cells = <0>;
++ compatible = "allwinner,sun4i-a10-codec-clk";
++ reg = <0x01c20140 0x4>;
++ clocks = <&pll2 SUN4I_A10_PLL2_1X>;
++ clock-output-names = "codec";
++ };
+ };
+
+ soc@01c00000 {
+@@ -656,6 +746,14 @@
+ status = "disabled";
+ };
+
++ crypto: crypto-engine@01c15000 {
++ compatible = "allwinner,sun4i-a10-crypto";
++ reg = <0x01c15000 0x1000>;
++ interrupts = <86>;
++ clocks = <&ahb_gates 5>, <&ss_clk>;
++ clock-names = "ahb", "mod";
++ };
++
+ spi2: spi@01c17000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c17000 0x1000>;
+@@ -961,6 +1059,19 @@
+ status = "disabled";
+ };
+
++ codec: codec@01c22c00 {
++ #sound-dai-cells = <0>;
++ compatible = "allwinner,sun4i-a10-codec";
++ reg = <0x01c22c00 0x40>;
++ interrupts = <30>;
++ clocks = <&apb0_gates 0>, <&codec_clk>;
++ clock-names = "apb", "codec";
++ dmas = <&dma SUN4I_DMA_NORMAL 19>,
++ <&dma SUN4I_DMA_NORMAL 19>;
++ dma-names = "rx", "tx";
++ status = "disabled";
++ };
++
+ sid: eeprom@01c23800 {
+ compatible = "allwinner,sun4i-a10-sid";
+ reg = <0x01c23800 0x10>;
+diff --git a/arch/arm/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/dts/sun5i-a10s-auxtek-t004.dts
+index 2b3511e..a790ec8 100644
+--- a/arch/arm/dts/sun5i-a10s-auxtek-t004.dts
++++ b/arch/arm/dts/sun5i-a10s-auxtek-t004.dts
+@@ -86,6 +86,20 @@
+ status = "okay";
+ };
+
++&i2c0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c0_pins_a>;
++ status = "okay";
++
++ axp152: pmic@30 {
++ compatible = "x-powers,axp152";
++ reg = <0x30>;
++ interrupts = <0>;
++ interrupt-controller;
++ #interrupt-cells = <1>;
++ };
++};
++
+ &mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>;
+diff --git a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
+index 5a422c1..86d046a 100644
+--- a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
++++ b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
+@@ -111,7 +111,7 @@
+ status = "okay";
+
+ at24@50 {
+- compatible = "at,24c16";
++ compatible = "atmel,24c16";
+ pagesize = <16>;
+ reg = <0x50>;
+ read-only;
+diff --git a/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts
+index 7fbb0b0..6efbba6 100644
+--- a/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts
++++ b/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts
+@@ -123,7 +123,7 @@
+
+ &mmc0 {
+ pinctrl-names = "default";
+- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet98fv2>;
++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>;
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+@@ -131,27 +131,12 @@
+ status = "okay";
+ };
+
+-&mmc2 {
+- pinctrl-names = "default";
+- pinctrl-0 = <&mmc2_pins_a>;
+- vmmc-supply = <&reg_vcc3v3>;
+- bus-width = <8>;
+- non-removable;
+- status = "okay";
+-
+- mmccard: mmccard@0 {
+- reg = <0>;
+- compatible = "mmc-card";
+- broken-hpi;
+- };
+-};
+-
+ &otg_sram {
+ status = "okay";
+ };
+
+ &pio {
+- mmc0_cd_pin_inet98fv2: mmc0_cd_pin@0 {
++ mmc0_cd_pin_d709: mmc0_cd_pin@0 {
+ allwinner,pins = "PG0";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+diff --git a/arch/arm/dts/sun5i-a13-inet-98v-rev2.dts b/arch/arm/dts/sun5i-a13-inet-98v-rev2.dts
+index 6d466a2..1b11ec9 100644
+--- a/arch/arm/dts/sun5i-a13-inet-98v-rev2.dts
++++ b/arch/arm/dts/sun5i-a13-inet-98v-rev2.dts
+@@ -123,21 +123,6 @@
+ status = "okay";
+ };
+
+-&mmc2 {
+- pinctrl-names = "default";
+- pinctrl-0 = <&mmc2_pins_a>;
+- vmmc-supply = <&reg_vcc3v3>;
+- bus-width = <8>;
+- non-removable;
+- status = "okay";
+-
+- mmccard: mmccard@0 {
+- reg = <0>;
+- compatible = "mmc-card";
+- broken-hpi;
+- };
+-};
+-
+ &otg_sram {
+ status = "okay";
+ };
+@@ -201,11 +186,6 @@
+ status = "okay";
+ };
+
+-&reg_usb1_vbus {
+- gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+- status = "okay";
+-};
+-
+ &uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_b>;
+@@ -221,16 +201,12 @@
+ allwinner,pins = "PG12";
+ };
+
+-&usb1_vbus_pin_a {
+- allwinner,pins = "PG11";
+-};
+-
+ &usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+ usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ usb0_vbus-supply = <&reg_usb0_vbus>;
+- usb1_vbus-supply = <&reg_usb1_vbus>;
++ usb1_vbus-supply = <&reg_ldo3>;
+ status = "okay";
+ };
+diff --git a/arch/arm/dts/sun5i-a13-utoo-p66.dts b/arch/arm/dts/sun5i-a13-utoo-p66.dts
+index eb793d5..fa9ddfd 100644
+--- a/arch/arm/dts/sun5i-a13-utoo-p66.dts
++++ b/arch/arm/dts/sun5i-a13-utoo-p66.dts
+@@ -47,11 +47,21 @@
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
++#include <dt-bindings/pwm/pwm.h>
+
+ / {
+ model = "Utoo P66";
+ compatible = "utoo,p66", "allwinner,sun5i-a13";
+
++ backlight: backlight {
++ compatible = "pwm-backlight";
++ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
++ /* Note levels of 10 / 20% result in backlight off */
++ brightness-levels = <0 30 40 50 60 70 80 90 100>;
++ default-brightness-level = <6>;
++ /* TODO: backlight uses axp gpio1 as enable pin */
++ };
++
+ i2c_lcd: i2c@0 {
+ /* The lcd panel i2c interface is hooked up via gpios */
+ compatible = "i2c-gpio";
+@@ -63,6 +73,13 @@
+ };
+ };
+
++&codec {
++ pinctrl-names = "default";
++ pinctrl-0 = <&codec_pa_pin>;
++ allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */
++ status = "okay";
++};
++
+ &cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+ };
+@@ -158,6 +175,13 @@
+ };
+
+ &pio {
++ codec_pa_pin: codec_pa_pin@0 {
++ allwinner,pins = "PG3";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
+ mmc0_cd_pin_p66: mmc0_cd_pin@0 {
+ allwinner,pins = "PG0";
+ allwinner,function = "gpio_in";
+@@ -201,6 +225,12 @@
+ };
+ };
+
++&pwm {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pwm0_pins>;
++ status = "okay";
++};
++
+ &reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+diff --git a/arch/arm/dts/sun5i-q8-common.dtsi b/arch/arm/dts/sun5i-q8-common.dtsi
+index 0641d68..a78e189 100644
+--- a/arch/arm/dts/sun5i-q8-common.dtsi
++++ b/arch/arm/dts/sun5i-q8-common.dtsi
+@@ -41,11 +41,21 @@
+ */
+ #include "sunxi-q8-common.dtsi"
+
++#include <dt-bindings/pwm/pwm.h>
++
+ / {
+ aliases {
+ serial0 = &uart1;
+ };
+
++ backlight: backlight {
++ compatible = "pwm-backlight";
++ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
++ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
++ default-brightness-level = <8>;
++ /* TODO: backlight uses axp gpio1 as enable pin */
++ };
++
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+diff --git a/arch/arm/dts/sun5i-r8-chip.dts b/arch/arm/dts/sun5i-r8-chip.dts
+index abf3ccb..6ad19e2 100644
+--- a/arch/arm/dts/sun5i-r8-chip.dts
++++ b/arch/arm/dts/sun5i-r8-chip.dts
+@@ -64,6 +64,26 @@
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
++
++ wifi_reg_on: wifi_reg_on {
++ compatible = "regulator-fixed";
++ pinctrl-names = "default";
++ pinctrl-0 = <&chip_wifi_reg_on_pin>;
++
++ regulator-name = "wifi-reg-on";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&pio 2 19 GPIO_ACTIVE_HIGH>; /* PC19 */
++ enable-active-high;
++ };
++};
++
++&codec {
++ status = "okay";
++};
++
++&cpu0 {
++ cpu-supply = <&reg_dcdc2>;
+ };
+
+ &ehci0 {
+@@ -109,10 +129,14 @@
+ };
+ };
+
++&mmc0_pins_a {
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++};
++
+ &mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>;
+- vmmc-supply = <&reg_vcc3v3>;
++ vmmc-supply = <&wifi_reg_on>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+@@ -134,6 +158,13 @@
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
++ chip_wifi_reg_on_pin: chip_wifi_reg_on_pin@0 {
++ allwinner,pins = "PC19";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
+ chip_id_det_pin: chip_id_det_pin@0 {
+ allwinner,pins = "PG2";
+ allwinner,function = "gpio_in";
+@@ -167,6 +198,20 @@
+ regulator-always-on;
+ };
+
++&reg_ldo3 {
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vdd-wifi1";
++ regulator-always-on;
++};
++
++&reg_ldo4 {
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vdd-wifi2";
++ regulator-always-on;
++};
++
+ &reg_ldo5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+diff --git a/arch/arm/dts/sun5i.dtsi b/arch/arm/dts/sun5i.dtsi
+index 9ffee9b..59a9426 100644
+--- a/arch/arm/dts/sun5i.dtsi
++++ b/arch/arm/dts/sun5i.dtsi
+@@ -44,6 +44,7 @@
+
+ #include "skeleton.dtsi"
+
++#include <dt-bindings/clock/sun4i-a10-pll2.h>
+ #include <dt-bindings/dma/sun4i-a10.h>
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
+
+@@ -102,6 +103,15 @@
+ clock-output-names = "pll1";
+ };
+
++ pll2: clk@01c20008 {
++ #clock-cells = <1>;
++ compatible = "allwinner,sun5i-a13-pll2-clk";
++ reg = <0x01c20008 0x8>;
++ clocks = <&osc24M>;
++ clock-output-names = "pll2-1x", "pll2-2x",
++ "pll2-4x", "pll2-8x";
++ };
++
+ pll4: clk@01c20018 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-pll1-clk";
+@@ -285,6 +295,14 @@
+ clock-output-names = "usb_ohci0", "usb_phy";
+ };
+
++ codec_clk: clk@01c20140 {
++ #clock-cells = <0>;
++ compatible = "allwinner,sun4i-a10-codec-clk";
++ reg = <0x01c20140 0x4>;
++ clocks = <&pll2 SUN4I_A10_PLL2_1X>;
++ clock-output-names = "codec";
++ };
++
+ mbus_clk: clk@01c2015c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun5i-a13-mbus-clk";
+@@ -571,6 +589,19 @@
+ status = "disabled";
+ };
+
++ codec: codec@01c22c00 {
++ #sound-dai-cells = <0>;
++ compatible = "allwinner,sun4i-a10-codec";
++ reg = <0x01c22c00 0x40>;
++ interrupts = <30>;
++ clocks = <&apb0_gates 0>, <&codec_clk>;
++ clock-names = "apb", "codec";
++ dmas = <&dma SUN4I_DMA_NORMAL 19>,
++ <&dma SUN4I_DMA_NORMAL 19>;
++ dma-names = "rx", "tx";
++ status = "disabled";
++ };
++
+ sid: eeprom@01c23800 {
+ compatible = "allwinner,sun4i-a10-sid";
+ reg = <0x01c23800 0x10>;
+diff --git a/arch/arm/dts/sun6i-a31-colombus.dts b/arch/arm/dts/sun6i-a31-colombus.dts
+index 0d0b6f2..f9cf368 100644
+--- a/arch/arm/dts/sun6i-a31-colombus.dts
++++ b/arch/arm/dts/sun6i-a31-colombus.dts
+@@ -60,6 +60,16 @@
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
++
++ i2c_lcd: i2c@0 {
++ /* The lcd panel i2c interface is hooked up via gpios */
++ compatible = "i2c-gpio";
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c_lcd_pins>;
++ gpios = <&pio 0 23 GPIO_ACTIVE_HIGH>, /* PA23, sda */
++ <&pio 0 24 GPIO_ACTIVE_HIGH>; /* PA24, scl */
++ i2c-gpio,delay-us = <5>;
++ };
+ };
+
+ &ehci1 {
+@@ -94,6 +104,13 @@
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
++
++ mma8452: mma8452@1d {
++ compatible = "fsl,mma8452";
++ reg = <0x1d>;
++ interrupt-parent = <&pio>;
++ interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PA9 */
++ };
+ };
+
+ &mmc0 {
+@@ -124,6 +141,13 @@
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
++
++ i2c_lcd_pins: i2c_lcd_pin@0 {
++ allwinner,pins = "PA23", "PA24";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
+ };
+
+ &reg_usb2_vbus {
+diff --git a/arch/arm/dts/sun6i-a31-hummingbird.dts b/arch/arm/dts/sun6i-a31-hummingbird.dts
+index d0cfada..9a74637 100644
+--- a/arch/arm/dts/sun6i-a31-hummingbird.dts
++++ b/arch/arm/dts/sun6i-a31-hummingbird.dts
+@@ -54,6 +54,8 @@
+ compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
+
+ aliases {
++ rtc0 = &pcf8563;
++ rtc1 = &rtc;
+ serial0 = &uart0;
+ };
+
+@@ -67,13 +69,17 @@
+ };
+ };
+
++&cpu0 {
++ cpu-supply = <&reg_dcdc3>;
++};
++
+ &ehci0 {
+ status = "okay";
+ };
+
+ &gmac {
+ pinctrl-names = "default";
+- pinctrl-0 = <&gmac_pins_rgmii_a>;
++ pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_hummingbird>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>;
+@@ -119,7 +125,7 @@
+ &mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
+- vmmc-supply = <&vcc_3v0>;
++ vmmc-supply = <&reg_dcdc1>;
+ bus-width = <4>;
+ cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+ cd-inverted;
+@@ -134,7 +140,7 @@
+ &mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>;
+- vmmc-supply = <&vcc_wifi>;
++ vmmc-supply = <&reg_aldo1>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+@@ -146,6 +152,13 @@
+ };
+
+ &pio {
++ gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 {
++ allwinner,pins = "PA21";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
+ mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
+ allwinner,pins = "PA8";
+ allwinner,function = "gpio_in";
+@@ -164,70 +177,69 @@
+ &p2wi {
+ status = "okay";
+
+- axp221: pmic@68 {
++ axp22x: pmic@68 {
+ compatible = "x-powers,axp221";
+ reg = <0x68>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+- interrupt-controller;
+- #interrupt-cells = <1>;
+- dcdc1-supply = <&vcc_3v0>;
+- dcdc5-supply = <&vcc_dram>;
+-
+- regulators {
+- x-powers,dcdc-freq = <3000>;
+-
+- vcc_3v0: dcdc1 {
+- regulator-always-on;
+- regulator-min-microvolt = <3000000>;
+- regulator-max-microvolt = <3000000>;
+- regulator-name = "vcc-3v0";
+- };
+-
+- vdd_cpu: dcdc2 {
+- regulator-always-on;
+- regulator-min-microvolt = <700000>;
+- regulator-max-microvolt = <1320000>;
+- regulator-name = "vdd-cpu";
+- };
+-
+- vdd_gpu: dcdc3 {
+- regulator-always-on;
+- regulator-min-microvolt = <700000>;
+- regulator-max-microvolt = <1320000>;
+- regulator-name = "vdd-gpu";
+- };
+-
+- vdd_sys_dll: dcdc4 {
+- regulator-always-on;
+- regulator-min-microvolt = <1100000>;
+- regulator-max-microvolt = <1100000>;
+- regulator-name = "vdd-sys-dll";
+- };
+-
+- vcc_dram: dcdc5 {
+- regulator-always-on;
+- regulator-min-microvolt = <1500000>;
+- regulator-max-microvolt = <1500000>;
+- regulator-name = "vcc-dram";
+- };
+-
+- vcc_wifi: aldo1 {
+- regulator-min-microvolt = <3300000>;
+- regulator-max-microvolt = <3300000>;
+- regulator-name = "vcc_wifi";
+- };
+-
+- avcc: aldo3 {
+- regulator-always-on;
+- regulator-min-microvolt = <3000000>;
+- regulator-max-microvolt = <3000000>;
+- regulator-name = "avcc";
+- };
+- };
+ };
+ };
+
++#include "axp22x.dtsi"
++
++&reg_aldo1 {
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-wifi";
++};
++
++&reg_aldo3 {
++ regulator-always-on;
++ regulator-min-microvolt = <2700000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "avcc";
++};
++
++&reg_dc5ldo {
++ regulator-min-microvolt = <700000>;
++ regulator-max-microvolt = <1320000>;
++ regulator-name = "vdd-cpus";
++};
++
++&reg_dcdc1 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "vcc-3v0";
++};
++
++&reg_dcdc2 {
++ regulator-min-microvolt = <700000>;
++ regulator-max-microvolt = <1320000>;
++ regulator-name = "vdd-gpu";
++};
++
++&reg_dcdc3 {
++ regulator-always-on;
++ regulator-min-microvolt = <700000>;
++ regulator-max-microvolt = <1320000>;
++ regulator-name = "vdd-cpu";
++};
++
++&reg_dcdc4 {
++ regulator-always-on;
++ regulator-min-microvolt = <700000>;
++ regulator-max-microvolt = <1320000>;
++ regulator-name = "vdd-sys-dll";
++};
++
++&reg_dcdc5 {
++ regulator-always-on;
++ regulator-min-microvolt = <1500000>;
++ regulator-max-microvolt = <1500000>;
++ regulator-name = "vcc-dram";
++};
++
+ &reg_usb1_vbus {
+ gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+ status = "okay";
+diff --git a/arch/arm/dts/sun6i-a31.dtsi b/arch/arm/dts/sun6i-a31.dtsi
+index 44f889f..1867af2 100644
+--- a/arch/arm/dts/sun6i-a31.dtsi
++++ b/arch/arm/dts/sun6i-a31.dtsi
+@@ -61,7 +61,7 @@
+ #size-cells = <1>;
+ ranges;
+
+- framebuffer@0 {
++ simplefb_hdmi: framebuffer@0 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0-hdmi";
+@@ -69,7 +69,7 @@
+ status = "disabled";
+ };
+
+- framebuffer@1 {
++ simplefb_lcd: framebuffer@1 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0";
+@@ -252,6 +252,20 @@
+ compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
+ reg = <0x01c20060 0x8>;
+ clocks = <&ahb1>;
++ clock-indices = <1>, <5>,
++ <6>, <8>, <9>,
++ <10>, <11>, <12>,
++ <13>, <14>,
++ <17>, <18>, <19>,
++ <20>, <21>, <22>,
++ <23>, <24>, <26>,
++ <27>, <29>,
++ <30>, <31>, <32>,
++ <36>, <37>, <40>,
++ <43>, <44>, <45>,
++ <46>, <47>, <50>,
++ <52>, <55>, <56>,
++ <57>, <58>;
+ clock-output-names = "ahb1_mipidsi", "ahb1_ss",
+ "ahb1_dma", "ahb1_mmc0", "ahb1_mmc1",
+ "ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1",
+@@ -281,6 +295,9 @@
+ compatible = "allwinner,sun6i-a31-apb1-gates-clk";
+ reg = <0x01c20068 0x4>;
+ clocks = <&apb1>;
++ clock-indices = <0>, <4>,
++ <5>, <12>,
++ <13>;
+ clock-output-names = "apb1_codec", "apb1_digital_mic",
+ "apb1_pio", "apb1_daudio0",
+ "apb1_daudio1";
+@@ -299,6 +316,10 @@
+ compatible = "allwinner,sun6i-a31-apb2-gates-clk";
+ reg = <0x01c2006c 0x4>;
+ clocks = <&apb2>;
++ clock-indices = <0>, <1>,
++ <2>, <3>, <16>,
++ <17>, <18>, <19>,
++ <20>, <21>;
+ clock-output-names = "apb2_i2c0", "apb2_i2c1",
+ "apb2_i2c2", "apb2_i2c3",
+ "apb2_uart0", "apb2_uart1",
+@@ -346,6 +367,14 @@
+ "mmc3_sample";
+ };
+
++ ss_clk: clk@01c2009c {
++ #clock-cells = <0>;
++ compatible = "allwinner,sun4i-a10-mod0-clk";
++ reg = <0x01c2009c 0x4>;
++ clocks = <&osc24M>, <&pll6 0>;
++ clock-output-names = "ss";
++ };
++
+ spi0_clk: clk@01c200a0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+@@ -384,6 +413,9 @@
+ compatible = "allwinner,sun6i-a31-usb-clk";
+ reg = <0x01c200cc 0x4>;
+ clocks = <&osc24M>;
++ clock-indices = <8>, <9>, <10>,
++ <16>, <17>,
++ <18>;
+ clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
+ "usb_ohci0", "usb_ohci1",
+ "usb_ohci2";
+@@ -677,6 +709,16 @@
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
++ mmc3_8bit_emmc_pins: mmc3@1 {
++ allwinner,pins = "PC6", "PC7", "PC8", "PC9",
++ "PC10", "PC11", "PC12",
++ "PC13", "PC14", "PC15",
++ "PC24";
++ allwinner,function = "mmc3";
++ allwinner,drive = <SUN4I_PINCTRL_40_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
+ gmac_pins_mii_a: gmac_mii@0 {
+ allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+ "PA8", "PA9", "PA11",
+@@ -754,6 +796,13 @@
+ reg = <0x01c20ca0 0x20>;
+ };
+
++ lradc: lradc@01c22800 {
++ compatible = "allwinner,sun4i-a10-lradc-keys";
++ reg = <0x01c22800 0x100>;
++ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
++ status = "disabled";
++ };
++
+ rtp: rtp@01c25000 {
+ compatible = "allwinner,sun6i-a31-ts";
+ reg = <0x01c25000 0x100>;
+@@ -900,6 +949,16 @@
+ #size-cells = <0>;
+ };
+
++ crypto: crypto-engine@01c15000 {
++ compatible = "allwinner,sun4i-a10-crypto";
++ reg = <0x01c15000 0x1000>;
++ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ahb1_gates 5>, <&ss_clk>;
++ clock-names = "ahb", "mod";
++ resets = <&ahb1_rst 5>;
++ reset-names = "ahb";
++ };
++
+ timer@01c60000 {
+ compatible = "allwinner,sun6i-a31-hstimer",
+ "allwinner,sun7i-a20-hstimer";
+@@ -1061,7 +1120,7 @@
+ resets = <&apb0_rst 0>;
+ gpio-controller;
+ interrupt-controller;
+- #interrupt-cells = <2>;
++ #interrupt-cells = <3>;
+ #size-cells = <0>;
+ #gpio-cells = <3>;
+
+diff --git a/arch/arm/dts/sun6i-a31s-primo81.dts b/arch/arm/dts/sun6i-a31s-primo81.dts
+index cfdc03e..379746a 100644
+--- a/arch/arm/dts/sun6i-a31s-primo81.dts
++++ b/arch/arm/dts/sun6i-a31s-primo81.dts
+@@ -1,16 +1,57 @@
+ /*
+- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
++ * Copyright 2014 Siarhei Siamashka <siarhei.siamashka@gmail.com>
++ * Copyright 2015 Karsten Merker <merker@debian.org>
++ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+- * Minimal dts file for the MSI Primo81 for u-boot only
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
+ *
+- * SPDX-License-Identifier: GPL-2.0+ or X11
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+ /dts-v1/;
+ #include "sun6i-a31s.dtsi"
++#include "sunxi-common-regulators.dtsi"
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+ / {
+- model = "MSI Primo81";
++ model = "MSI Primo81 tablet";
+ compatible = "msi,primo81", "allwinner,sun6i-a31s";
+
+ aliases {
+@@ -22,8 +63,202 @@
+ };
+ };
+
+-&uart0 {
++&cpu0 {
++ cpu-supply = <&reg_dcdc3>;
++};
++
++&ehci0 {
++ /* rtl8188etv wifi is connected here */
++ status = "okay";
++};
++
++&i2c0 {
++ /* pull-ups and device VDDIO use AXP221 DLDO3 */
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c0_pins_a>;
++ status = "failed";
++};
++
++&i2c1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c1_pins_a>;
++ status = "okay";
++
++ ctp@5d {
++ pinctrl-names = "default";
++ pinctrl-0 = <&gt911_int_primo81>;
++ compatible = "goodix,gt911";
++ reg = <0x5d>;
++ interrupt-parent = <&pio>;
++ interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */
++ touchscreen-swapped-x-y;
++ };
++};
++
++&i2c2 {
+ pinctrl-names = "default";
+- pinctrl-0 = <&uart0_pins_a>;
++ pinctrl-0 = <&i2c2_pins_a>;
++ status = "okay";
++
++ accelerometer@1c {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mma8452_int_primo81>;
++ compatible = "fsl,mma8452";
++ reg = <0x1c>;
++ interrupt-parent = <&pio>;
++ interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */
++ #io-channel-cells = <1>;
++ };
++};
++
++&lradc {
++ vref-supply = <&reg_aldo3>;
++ status = "okay";
++
++ button@158 {
++ label = "Volume Up";
++ linux,code = <KEY_VOLUMEUP>;
++ channel = <0>;
++ voltage = <158730>;
++ };
++
++ button@349 {
++ label = "Volume Down";
++ linux,code = <KEY_VOLUMEDOWN>;
++ channel = <0>;
++ voltage = <349206>;
++ };
++};
++
++&mmc0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>;
++ vmmc-supply = <&reg_dcdc1>;
++ bus-width = <4>;
++ cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
++ cd-inverted;
++ status = "okay";
++};
++
++&pio {
++ gt911_int_primo81: gt911_int_pin@0 {
++ allwinner,pins = "PA3";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
++ mma8452_int_primo81: mma8452_int_pin@0 {
++ allwinner,pins = "PA9";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
++
++ mmc0_cd_pin_primo81: mmc0_cd_pin@0 {
++ allwinner,pins = "PA8";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
++};
++
++&p2wi {
++ status = "okay";
++
++ axp22x: pmic@68 {
++ compatible = "x-powers,axp221";
++ reg = <0x68>;
++ interrupt-parent = <&nmi_intc>;
++ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
++ };
++};
++
++#include "axp22x.dtsi"
++
++&reg_aldo3 {
++ regulator-always-on;
++ regulator-min-microvolt = <2700000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "avcc";
++};
++
++&reg_dc1sw {
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "vcc-lcd";
++};
++
++&reg_dc5ldo {
++ regulator-min-microvolt = <700000>;
++ regulator-max-microvolt = <1320000>;
++ regulator-name = "vdd-cpus"; /* This is an educated guess */
++};
++
++&reg_dcdc1 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "vcc-3v0";
++};
++
++&reg_dcdc2 {
++ regulator-min-microvolt = <700000>;
++ regulator-max-microvolt = <1320000>;
++ regulator-name = "vdd-gpu";
++};
++
++&reg_dcdc3 {
++ regulator-always-on;
++ regulator-min-microvolt = <700000>;
++ regulator-max-microvolt = <1320000>;
++ regulator-name = "vdd-cpu";
++};
++
++&reg_dcdc4 {
++ regulator-always-on;
++ regulator-min-microvolt = <700000>;
++ regulator-max-microvolt = <1320000>;
++ regulator-name = "vdd-sys-dll";
++};
++
++&reg_dcdc5 {
++ regulator-always-on;
++ regulator-min-microvolt = <1500000>;
++ regulator-max-microvolt = <1500000>;
++ regulator-name = "vcc-dram";
++};
++
++&reg_dldo1 {
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-wifi";
++};
++
++&reg_dldo3 {
++ regulator-min-microvolt = <2800000>;
++ regulator-max-microvolt = <2800000>;
++ regulator-name = "vddio-csi";
++};
++
++&reg_eldo3 {
++ regulator-min-microvolt = <1080000>;
++ regulator-max-microvolt = <1320000>;
++ regulator-name = "vdd-mipi-bridge";
++};
++
++&simplefb_lcd {
++ vcc-lcd-supply = <&reg_dc1sw>;
++ vdd-mipi-bridge-supply = <&reg_eldo3>;
++};
++
++&usb_otg {
++ /* otg support requires support for AXP221 usb-power-supply and GPIO */
++ dr_mode = "host";
++ status = "okay";
++};
++
++&usbphy {
++ usb1_vbus-supply = <&reg_dldo1>;
+ status = "okay";
+ };
+diff --git a/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi
+new file mode 100644
+index 0000000..4ec0c86
+--- /dev/null
++++ b/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi
+@@ -0,0 +1,142 @@
++/*
++ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++#include "sun6i-a31s.dtsi"
++#include "sunxi-common-regulators.dtsi"
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/pinctrl/sun4i-a10.h>
++
++/ {
++ model = "Sinlinx SinA31s Core Board";
++ compatible = "sinlinx,sina31s", "allwinner,sun6i-a31s";
++
++ aliases {
++ serial0 = &uart0;
++ };
++};
++
++&cpu0 {
++ cpu-supply = <&reg_dcdc3>;
++};
++
++/* eMMC on core board */
++&mmc3 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc3_8bit_emmc_pins>;
++ vmmc-supply = <&reg_dcdc1>;
++ vqmmc-supply = <&reg_dcdc1>;
++ bus-width = <8>;
++ non-removable;
++ cap-mmc-hw-reset;
++ status = "okay";
++};
++
++/* AXP221s PMIC on core board */
++&p2wi {
++ status = "okay";
++
++ axp22x: pmic@68 {
++ compatible = "x-powers,axp221";
++ reg = <0x68>;
++ interrupt-parent = <&nmi_intc>;
++ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
++ };
++};
++
++#include "axp22x.dtsi"
++
++&reg_aldo3 {
++ regulator-always-on;
++ regulator-min-microvolt = <2700000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "avcc";
++};
++
++&reg_dc5ldo {
++ regulator-min-microvolt = <700000>;
++ regulator-max-microvolt = <1320000>;
++ regulator-name = "vdd-cpus";
++};
++
++&reg_dcdc1 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "vcc-3v0";
++};
++
++&reg_dcdc2 {
++ regulator-min-microvolt = <700000>;
++ regulator-max-microvolt = <1320000>;
++ regulator-name = "vdd-gpu";
++};
++
++&reg_dcdc3 {
++ regulator-always-on;
++ regulator-min-microvolt = <700000>;
++ regulator-max-microvolt = <1320000>;
++ regulator-name = "vdd-cpu";
++};
++
++&reg_dcdc4 {
++ regulator-always-on;
++ regulator-min-microvolt = <700000>;
++ regulator-max-microvolt = <1320000>;
++ regulator-name = "vdd-sys-dll";
++};
++
++&reg_dcdc5 {
++ regulator-always-on;
++ regulator-min-microvolt = <1500000>;
++ regulator-max-microvolt = <1500000>;
++ regulator-name = "vcc-dram";
++};
++
++/* UART0 pads available on core board */
++&uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pins_a>;
++ status = "okay";
++};
++
+diff --git a/arch/arm/dts/sun6i-a31s-sina31s.dts b/arch/arm/dts/sun6i-a31s-sina31s.dts
+new file mode 100644
+index 0000000..6ead2f5
+--- /dev/null
++++ b/arch/arm/dts/sun6i-a31s-sina31s.dts
+@@ -0,0 +1,153 @@
++/*
++ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/* The SinA31s development board has the SinA31s core board soldered on */
++#include "sun6i-a31s-sina31s-core.dtsi"
++
++#include <dt-bindings/input/input.h>
++
++/ {
++ model = "Sinlinx SinA31s Development Board";
++ compatible = "sinlinx,sina31s-sdk", "allwinner,sun6i-a31s";
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ leds {
++ compatible = "gpio-leds";
++ pinctrl-names = "default";
++ pinctrl-0 = <&led_pin_sina31s>;
++
++ status {
++ label = "sina31s:status:usr";
++ gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
++ };
++ };
++};
++
++&ehci0 {
++ /* USB 2.0 4 port hub IC */
++ status = "okay";
++};
++
++&ehci1 {
++ status = "okay";
++};
++
++&gmac {
++ pinctrl-names = "default";
++ pinctrl-0 = <&gmac_pins_mii_a>;
++ phy = <&phy1>;
++ phy-mode = "mii";
++ phy-supply = <&reg_dldo1>;
++ status = "okay";
++
++ phy1: ethernet-phy@1 {
++ reg = <1>;
++ };
++};
++
++&ir {
++ pinctrl-names = "default";
++ pinctrl-0 = <&ir_pins_a>;
++ status = "okay";
++};
++
++&lradc {
++ vref-supply = <&reg_aldo3>;
++ status = "okay";
++
++ button@158 {
++ label = "Volume Up";
++ linux,code = <KEY_VOLUMEUP>;
++ channel = <0>;
++ voltage = <158730>;
++ };
++
++ button@349 {
++ label = "Volume Down";
++ linux,code = <KEY_VOLUMEDOWN>;
++ channel = <0>;
++ voltage = <349206>;
++ };
++};
++
++&mmc0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>;
++ vmmc-supply = <&reg_dcdc1>;
++ bus-width = <4>;
++ cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */
++ cd-inverted;
++ status = "okay";
++};
++
++&ohci1 {
++ status = "okay";
++};
++
++&pio {
++ led_pin_sina31s: led_pin@0 {
++ allwinner,pins = "PH13";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
++ mmc0_cd_pin_sina31s: mmc0_cd_pin@0 {
++ allwinner,pins = "PA4";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
++};
++
++&reg_dldo1 {
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-gmac-phy";
++};
++
++&usbphy {
++ status = "okay";
++};
+diff --git a/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
+new file mode 100644
+index 0000000..360adfb
+--- /dev/null
++++ b/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
+@@ -0,0 +1,205 @@
++/*
++ * Copyright 2015 Lawrence Yu <lyu@micile.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++#include "sun6i-a31s.dtsi"
++#include "sunxi-common-regulators.dtsi"
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/pinctrl/sun4i-a10.h>
++
++/ {
++ model = "Yones TopTech BS1078 v2 Tablet";
++ compatible = "yones-toptech,bs1078-v2", "allwinner,sun6i-a31s";
++
++ aliases {
++ serial0 = &uart0;
++ i2c1 = &i2c1;
++ i2c2 = &i2c2;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++};
++
++&i2c1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c1_pins_a>;
++ status = "okay";
++};
++
++&i2c2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c2_pins_a>;
++ status = "okay";
++};
++
++&ehci0 {
++ status = "okay";
++};
++
++&ehci1 {
++ status = "okay";
++};
++
++&ohci0 {
++ status = "okay";
++};
++
++&ohci1 {
++ status = "okay";
++};
++
++&pio {
++ mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 {
++ allwinner,pins = "PA8";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
++};
++
++&mmc0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>;
++ vmmc-supply = <&reg_vcc3v0>;
++ bus-width = <4>;
++ cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
++ cd-inverted;
++ status = "okay";
++};
++
++&mmc0_pins_a {
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++};
++
++&p2wi {
++ status = "okay";
++
++ axp22x: pmic@68 {
++ compatible = "x-powers,axp221";
++ reg = <0x68>;
++ interrupt-parent = <&nmi_intc>;
++ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
++ };
++};
++
++#include "axp22x.dtsi"
++
++&reg_aldo3 {
++ regulator-always-on;
++ regulator-min-microvolt = <2700000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "avcc";
++};
++
++&reg_dc1sw {
++ regulator-name = "vcc-lcd-usb2";
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++};
++
++&reg_dc5ldo {
++ regulator-min-microvolt = <700000>;
++ regulator-max-microvolt = <1320000>;
++ regulator-name = "vdd-cpus";
++};
++
++&reg_dcdc1 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "vcc-3v0";
++};
++
++&reg_dcdc2 {
++ regulator-min-microvolt = <700000>;
++ regulator-max-microvolt = <1320000>;
++ regulator-name = "vdd-gpu";
++};
++
++&reg_dcdc3 {
++ regulator-always-on;
++ regulator-min-microvolt = <700000>;
++ regulator-max-microvolt = <1320000>;
++ regulator-name = "vdd-cpu";
++};
++
++&reg_dcdc4 {
++ regulator-always-on;
++ regulator-min-microvolt = <700000>;
++ regulator-max-microvolt = <1320000>;
++ regulator-name = "vdd-sys-dll";
++};
++
++&reg_dcdc5 {
++ regulator-always-on;
++ regulator-min-microvolt = <1500000>;
++ regulator-max-microvolt = <1500000>;
++ regulator-name = "vcc-dram";
++};
++
++&reg_dldo1 {
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-wifi";
++};
++
++/* Voltage source for I2C pullup resistors for I2C Bus 0 */
++&reg_dldo3 {
++ regulator-min-microvolt = <2800000>;
++ regulator-max-microvolt = <2800000>;
++ regulator-name = "vddio-csi";
++};
++
++&uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pins_a>;
++ status = "okay";
++};
++
++&usbphy {
++ usb1_vbus-supply = <&reg_dldo1>;
++ usb2_vbus-supply = <&reg_dc1sw>;
++ status = "okay";
++};
+diff --git a/arch/arm/dts/sun7i-a20-bananapi.dts b/arch/arm/dts/sun7i-a20-bananapi.dts
+index 9f7b472..67c8a76 100644
+--- a/arch/arm/dts/sun7i-a20-bananapi.dts
++++ b/arch/arm/dts/sun7i-a20-bananapi.dts
+@@ -92,6 +92,24 @@
+ status = "okay";
+ };
+
++&codec {
++ status = "okay";
++};
++
++&cpu0 {
++ cpu-supply = <&reg_dcdc2>;
++ operating-points = <
++ /* kHz uV */
++ 960000 1400000
++ 912000 1400000
++ 864000 1350000
++ 720000 1250000
++ 528000 1150000
++ 312000 1100000
++ 144000 1050000
++ >;
++};
++
+ &ehci0 {
+ status = "okay";
+ };
+@@ -119,13 +137,9 @@
+ status = "okay";
+
+ axp209: pmic@34 {
+- compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+-
+- interrupt-controller;
+- #interrupt-cells = <1>;
+ };
+ };
+
+@@ -159,7 +173,18 @@
+ status = "okay";
+ };
+
++&otg_sram {
++ status = "okay";
++};
++
+ &pio {
++ usb0_id_detect_pin: usb0_id_detect_pin@0 {
++ allwinner,pins = "PH4";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
++
+ mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
+ allwinner,pins = "PH10";
+ allwinner,function = "gpio_in";
+@@ -182,6 +207,37 @@
+ };
+ };
+
++#include "axp209.dtsi"
++
++&reg_dcdc2 {
++ regulator-always-on;
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-cpu";
++};
++
++&reg_dcdc3 {
++ regulator-always-on;
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-int-dll";
++};
++
++&reg_ldo1 {
++ regulator-name = "vdd-rtc";
++};
++
++&reg_ldo2 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "avcc";
++};
++
++&reg_usb0_vbus {
++ status = "okay";
++};
++
+ &reg_usb1_vbus {
+ status = "okay";
+ };
+@@ -216,7 +272,21 @@
+ status = "okay";
+ };
+
++&usb_otg {
++ dr_mode = "otg";
++ status = "okay";
++};
++
++&usb_power_supply {
++ status = "okay";
++};
++
+ &usbphy {
++ pinctrl-names = "default";
++ pinctrl-0 = <&usb0_id_detect_pin>;
++ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
++ usb0_vbus_power-supply = <&usb_power_supply>;
++ usb0_vbus-supply = <&reg_usb0_vbus>;
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ usb2_vbus-supply = <&reg_usb2_vbus>;
+ status = "okay";
+diff --git a/arch/arm/dts/sun7i-a20-cubieboard2.dts b/arch/arm/dts/sun7i-a20-cubieboard2.dts
+index 39a51d5..1fa832d 100644
+--- a/arch/arm/dts/sun7i-a20-cubieboard2.dts
++++ b/arch/arm/dts/sun7i-a20-cubieboard2.dts
+@@ -84,6 +84,10 @@
+ status = "okay";
+ };
+
++&codec {
++ status = "okay";
++};
++
+ &cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+ };
+@@ -150,6 +154,10 @@
+ status = "okay";
+ };
+
++&otg_sram {
++ status = "okay";
++};
++
+ &pio {
+ led_pins_cubieboard2: led_pins@0 {
+ allwinner,pins = "PH20", "PH21";
+@@ -157,12 +165,24 @@
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
++
++ usb0_id_detect_pin: usb0_id_detect_pin@0 {
++ allwinner,pins = "PH4";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
+ };
+
+ &reg_ahci_5v {
+ status = "okay";
+ };
+
++&usb_otg {
++ dr_mode = "otg";
++ status = "okay";
++};
++
+ #include "axp209.dtsi"
+
+ &reg_dcdc2 {
+@@ -205,6 +225,9 @@
+ };
+
+ &usbphy {
++ pinctrl-names = "default";
++ pinctrl-0 = <&usb0_id_detect_pin>;
++ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ usb2_vbus-supply = <&reg_usb2_vbus>;
+ status = "okay";
+diff --git a/arch/arm/dts/sun7i-a20-cubietruck.dts b/arch/arm/dts/sun7i-a20-cubietruck.dts
+index e6b0192..8da939a 100644
+--- a/arch/arm/dts/sun7i-a20-cubietruck.dts
++++ b/arch/arm/dts/sun7i-a20-cubietruck.dts
+@@ -101,6 +101,10 @@
+ status = "okay";
+ };
+
++&codec {
++ status = "okay";
++};
++
+ &cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+ };
+diff --git a/arch/arm/dts/sun7i-a20-icnova-swac.dts b/arch/arm/dts/sun7i-a20-icnova-swac.dts
+new file mode 100644
+index 0000000..f5b5325
+--- /dev/null
++++ b/arch/arm/dts/sun7i-a20-icnova-swac.dts
+@@ -0,0 +1,169 @@
++/*
++ * Copyright 2015 Stefan Roese <sr@denx.de>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++#include "sun7i-a20.dtsi"
++#include "sunxi-common-regulators.dtsi"
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/interrupt-controller/irq.h>
++#include <dt-bindings/pinctrl/sun4i-a10.h>
++
++/ {
++ model = "ICnova-A20 SWAC";
++ compatible = "swac,icnova-a20-swac", "incircuit,icnova-a20", "allwinner,sun7i-a20";
++
++ aliases {
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++};
++
++&cpu0 {
++ cpu-supply = <&reg_dcdc2>;
++};
++
++&ehci0 {
++ status = "okay";
++};
++
++&ehci1 {
++ status = "okay";
++};
++
++&gmac {
++ pinctrl-names = "default";
++ pinctrl-0 = <&gmac_pins_mii_a>;
++ phy = <&phy1>;
++ phy-mode = "mii";
++ status = "okay";
++
++ phy1: ethernet-phy@1 {
++ reg = <1>;
++ };
++};
++
++&i2c0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c0_pins_a>;
++ status = "okay";
++
++ axp209: pmic@34 {
++ reg = <0x34>;
++ interrupt-parent = <&nmi_intc>;
++ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
++ };
++};
++
++&i2c1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c1_pins_a>;
++ status = "okay";
++};
++
++&mmc0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
++ vmmc-supply = <&reg_vcc3v3>;
++ bus-width = <4>;
++ cd-gpios = <&pio 8 5 GPIO_ACTIVE_HIGH>; /* PI5 */
++ cd-inverted;
++ status = "okay";
++};
++
++&ohci0 {
++ status = "okay";
++};
++
++&ohci1 {
++ status = "okay";
++};
++
++#include "axp209.dtsi"
++
++&reg_dcdc2 {
++ regulator-always-on;
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-cpu";
++};
++
++&reg_dcdc3 {
++ regulator-always-on;
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-int-dll";
++};
++
++&reg_ldo1 {
++ regulator-name = "vdd-rtc";
++};
++
++&reg_ldo2 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "avcc";
++};
++
++&reg_usb1_vbus {
++ status = "okay";
++};
++
++&reg_usb2_vbus {
++ status = "okay";
++};
++
++&uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pins_a>;
++ status = "okay";
++};
++
++&usbphy {
++ usb1_vbus-supply = <&reg_usb1_vbus>;
++ usb2_vbus-supply = <&reg_usb2_vbus>;
++ status = "okay";
++};
+diff --git a/arch/arm/dts/sun7i-a20-itead-ibox.dts b/arch/arm/dts/sun7i-a20-itead-ibox.dts
+new file mode 100644
+index 0000000..661c21d
+--- /dev/null
++++ b/arch/arm/dts/sun7i-a20-itead-ibox.dts
+@@ -0,0 +1,125 @@
++/*
++ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++#include "sun7i-a20.dtsi"
++#include "sunxi-itead-core-common.dtsi"
++
++/ {
++ model = "Itead Ibox A20";
++ compatible = "itead,itead-ibox-a20", "allwinner,sun7i-a20";
++
++ leds {
++ compatible = "gpio-leds";
++ pinctrl-names = "default";
++ pinctrl-0 = <&led_pins_itead_core>;
++
++ green {
++ label = "itead_core:green:usr";
++ gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
++ default-state = "on";
++ };
++
++ blue {
++ label = "itead_core:blue:usr";
++ gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
++ default-state = "on";
++ };
++ };
++};
++
++&ahci {
++ target-supply = <&reg_ahci_5v>;
++ status = "okay";
++};
++
++&codec {
++ status = "okay";
++};
++
++&gmac {
++ pinctrl-names = "default";
++ pinctrl-0 = <&gmac_pins_mii_a>;
++ phy = <&phy1>;
++ phy-mode = "mii";
++ status = "okay";
++
++ phy1: ethernet-phy@1 {
++ reg = <1>;
++ };
++};
++
++&i2c0 {
++ axp209: pmic@34 {
++ interrupt-parent = <&nmi_intc>;
++ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
++ };
++};
++
++&ir0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&ir0_rx_pins_a>;
++ status = "okay";
++};
++
++&mmc0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
++ vmmc-supply = <&reg_vcc3v3>;
++ bus-width = <4>;
++ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
++ cd-inverted;
++ status = "okay";
++};
++
++&pio {
++ led_pins_itead_core: led_pins@0 {
++ allwinner,pins = "PH20","PH21";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++};
++
++&reg_ahci_5v {
++ status = "okay";
++};
+diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
+index 975b0b2..5ee43d8 100644
+--- a/arch/arm/dts/sun7i-a20-lamobo-r1.dts
++++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
+@@ -97,16 +97,6 @@
+
+ &cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+- operating-points = <
+- /* kHz uV */
+- 960000 1400000
+- 912000 1400000
+- 864000 1350000
+- 720000 1250000
+- 528000 1150000
+- 312000 1100000
+- 144000 1050000
+- >;
+ };
+
+ &ehci0 {
+diff --git a/arch/arm/dts/sun7i-a20-mk808c.dts b/arch/arm/dts/sun7i-a20-mk808c.dts
+index 4f432f8..90ff4a2 100644
+--- a/arch/arm/dts/sun7i-a20-mk808c.dts
++++ b/arch/arm/dts/sun7i-a20-mk808c.dts
+@@ -53,6 +53,7 @@
+
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
++#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+ / {
+ model = "mk808c";
+@@ -68,6 +69,10 @@
+ };
+ };
+
++&codec {
++ status = "okay";
++};
++
+ &ehci0 {
+ status = "okay";
+ };
+@@ -121,6 +126,30 @@
+ status = "okay";
+ };
+
++&otg_sram {
++ status = "okay";
++};
++
++&pio {
++ usb0_id_detect_pin: usb0_id_detect_pin@0 {
++ allwinner,pins = "PH4";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
++ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
++ allwinner,pins = "PH5";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++};
++
++&reg_usb0_vbus {
++ status = "okay";
++};
++
+ &reg_usb1_vbus {
+ status = "okay";
+ };
+@@ -141,7 +170,17 @@
+ status = "okay";
+ };
+
++&usb_otg {
++ dr_mode = "otg";
++ status = "okay";
++};
++
+ &usbphy {
++ pinctrl-names = "default";
++ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
++ usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
++ usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
++ usb0_vbus-supply = <&reg_usb0_vbus>;
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ usb2_vbus-supply = <&reg_usb2_vbus>;
+ status = "okay";
+diff --git a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
+index 6904dbd..23aacce 100644
+--- a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
++++ b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
+@@ -1,5 +1,6 @@
+ /*
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
++ * Copyright 2015 - Karsten Merker <merker@debian.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+@@ -45,6 +46,7 @@
+ #include "sunxi-common-regulators.dtsi"
+
+ #include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
+
+@@ -71,14 +73,6 @@
+ default-state = "on";
+ };
+ };
+-
+- reg_axp_ipsout: axp_ipsout {
+- compatible = "regulator-fixed";
+- regulator-name = "axp-ipsout";
+- regulator-min-microvolt = <5000000>;
+- regulator-max-microvolt = <5000000>;
+- regulator-always-on;
+- };
+ };
+
+ &ahci {
+@@ -94,6 +88,10 @@
+ status = "okay";
+ };
+
++&codec {
++ status = "okay";
++};
++
+ &gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+@@ -118,10 +116,58 @@
+ };
+ };
+
+-&i2c1 {
+- pinctrl-names = "default";
+- pinctrl-0 = <&i2c1_pins_a>;
++&lradc {
++ vref-supply = <&reg_vcc3v0>;
+ status = "okay";
++
++ button@190 {
++ label = "Volume Up";
++ linux,code = <KEY_VOLUMEUP>;
++ channel = <0>;
++ voltage = <190000>;
++ };
++
++ button@390 {
++ label = "Volume Down";
++ linux,code = <KEY_VOLUMEDOWN>;
++ channel = <0>;
++ voltage = <390000>;
++ };
++
++ button@600 {
++ label = "Menu";
++ linux,code = <KEY_MENU>;
++ channel = <0>;
++ voltage = <600000>;
++ };
++
++ button@800 {
++ label = "Search";
++ linux,code = <KEY_SEARCH>;
++ channel = <0>;
++ voltage = <800000>;
++ };
++
++ button@980 {
++ label = "Home";
++ linux,code = <KEY_HOMEPAGE>;
++ channel = <0>;
++ voltage = <980000>;
++ };
++
++ button@1180 {
++ label = "Esc";
++ linux,code = <KEY_ESC>;
++ channel = <0>;
++ voltage = <1180000>;
++ };
++
++ button@1400 {
++ label = "Enter";
++ linux,code = <KEY_ENTER>;
++ channel = <0>;
++ voltage = <1400000>;
++ };
+ };
+
+ &mmc0 {
+@@ -134,6 +180,16 @@
+ status = "okay";
+ };
+
++&mmc3 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olimex_som_evb>;
++ vmmc-supply = <&reg_vcc3v3>;
++ bus-width = <4>;
++ cd-gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
++ cd-inverted;
++ status = "okay";
++};
++
+ &ohci0 {
+ status = "okay";
+ };
+@@ -161,15 +217,22 @@
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
++ mmc3_cd_pin_olimex_som_evb: mmc3_cd_pin@0 {
++ allwinner,pins = "PH0";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
++
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+- allwinner,pins = "PH04";
++ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+- allwinner,pins = "PH05";
++ allwinner,pins = "PH5";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+@@ -187,7 +250,7 @@
+ &reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+- regulator-max-microvolt = <1425000>;
++ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+ };
+
+@@ -235,8 +298,8 @@
+ &usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+- usb0_id_det-gpios = <&pio 7 04 GPIO_ACTIVE_HIGH>; /* PH04 */
+- usb0_vbus_det-gpios = <&pio 7 05 GPIO_ACTIVE_HIGH>; /* PH05 */
++ usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */
++ usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH05 */
+ usb0_vbus-supply = <&reg_usb0_vbus>;
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ usb2_vbus-supply = <&reg_usb2_vbus>;
+diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
+index 0423708..35ad700 100644
+--- a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
++++ b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
+@@ -117,6 +117,18 @@
+ };
+ };
+
++&i2c1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c1_pins_a>;
++ status = "okay";
++
++ eeprom: eeprom@50 {
++ compatible = "atmel,24c16";
++ reg = <0x50>;
++ pagesize = <16>;
++ };
++};
++
+ &mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
+index 8acff78..d5c796c 100644
+--- a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
++++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
+@@ -170,6 +170,12 @@
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
++
++ eeprom: eeprom@50 {
++ compatible = "atmel,24c16";
++ reg = <0x50>;
++ pagesize = <16>;
++ };
+ };
+
+ &mmc0 {
+@@ -190,6 +196,10 @@
+ status = "okay";
+ };
+
++&otg_sram {
++ status = "okay";
++};
++
+ &pio {
+ ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+ allwinner,pins = "PC3";
+@@ -204,6 +214,27 @@
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
++
++ usb0_id_detect_pin: usb0_id_detect_pin@0 {
++ allwinner,pins = "PH4";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
++
++ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
++ allwinner,pins = "PH5";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
++ };
++
++ usb0_vbus_pin_lime2: usb0_vbus_pin@0 {
++ allwinner,pins = "PC17";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
+ };
+
+ &reg_ahci_5v {
+@@ -212,6 +243,12 @@
+ status = "okay";
+ };
+
++&reg_usb0_vbus {
++ pinctrl-0 = <&usb0_vbus_pin_lime2>;
++ gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
++ status = "okay";
++};
++
+ &reg_usb1_vbus {
+ status = "okay";
+ };
+@@ -226,7 +263,17 @@
+ status = "okay";
+ };
+
++&usb_otg {
++ dr_mode = "otg";
++ status = "okay";
++};
++
+ &usbphy {
++ pinctrl-names = "default";
++ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
++ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
++ usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
++ usb0_vbus-supply = <&reg_usb0_vbus>;
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ usb2_vbus-supply = <&reg_usb2_vbus>;
+ status = "okay";
+diff --git a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
+index c5d70ca..7e3006f 100644
+--- a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
++++ b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
+@@ -125,6 +125,12 @@
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
++
++ eeprom: eeprom@50 {
++ compatible = "atmel,24c16";
++ reg = <0x50>;
++ pagesize = <16>;
++ };
+ };
+
+ &i2c2 {
+diff --git a/arch/arm/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
+index 73cd81e..2be04c4 100644
+--- a/arch/arm/dts/sun7i-a20-orangepi-mini.dts
++++ b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
+@@ -95,6 +95,10 @@
+ status = "okay";
+ };
+
++&codec {
++ status = "okay";
++};
++
+ &ehci0 {
+ status = "okay";
+ };
+@@ -156,7 +160,18 @@
+ status = "okay";
+ };
+
++&otg_sram {
++ status = "okay";
++};
++
+ &pio {
++ usb0_id_detect_pin: usb0_id_detect_pin@0 {
++ allwinner,pins = "PH4";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
++
+ mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
+ allwinner,pins = "PH10";
+ allwinner,function = "gpio_in";
+@@ -225,6 +240,10 @@
+ regulator-name = "avcc";
+ };
+
++&reg_usb0_vbus {
++ status = "okay";
++};
++
+ &reg_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_bananapro>;
+ gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
+@@ -243,7 +262,21 @@
+ status = "okay";
+ };
+
++&usb_otg {
++ dr_mode = "otg";
++ status = "okay";
++};
++
++&usb_power_supply {
++ status = "okay";
++};
++
+ &usbphy {
++ pinctrl-names = "default";
++ pinctrl-0 = <&usb0_id_detect_pin>;
++ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
++ usb0_vbus_power-supply = <&usb_power_supply>;
++ usb0_vbus-supply = <&reg_usb0_vbus>;
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ usb2_vbus-supply = <&reg_usb2_vbus>;
+ status = "okay";
+diff --git a/arch/arm/dts/sun7i-a20-orangepi.dts b/arch/arm/dts/sun7i-a20-orangepi.dts
+index 55a06ce..71125bf 100644
+--- a/arch/arm/dts/sun7i-a20-orangepi.dts
++++ b/arch/arm/dts/sun7i-a20-orangepi.dts
+@@ -141,7 +141,18 @@
+ status = "okay";
+ };
+
++&otg_sram {
++ status = "okay";
++};
++
+ &pio {
++ usb0_id_detect_pin: usb0_id_detect_pin@0 {
++ allwinner,pins = "PH4";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
++
+ mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
+ allwinner,pins = "PH10";
+ allwinner,function = "gpio_in";
+@@ -203,6 +214,10 @@
+ regulator-name = "avcc";
+ };
+
++&reg_usb0_vbus {
++ status = "okay";
++};
++
+ &reg_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_bananapro>;
+ gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
+@@ -221,7 +236,21 @@
+ status = "okay";
+ };
+
++&usb_otg {
++ dr_mode = "otg";
++ status = "okay";
++};
++
++&usb_power_supply {
++ status = "okay";
++};
++
+ &usbphy {
++ pinctrl-names = "default";
++ pinctrl-0 = <&usb0_id_detect_pin>;
++ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
++ usb0_vbus_power-supply = <&usb_power_supply>;
++ usb0_vbus-supply = <&reg_usb0_vbus>;
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ usb2_vbus-supply = <&reg_usb2_vbus>;
+ status = "okay";
+diff --git a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
+index 5361fce..ddac732 100644
+--- a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
++++ b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
+@@ -82,6 +82,14 @@
+ status = "okay";
+ };
+
++&codec {
++ status = "okay";
++};
++
++&cpu0 {
++ cpu-supply = <&reg_dcdc2>;
++};
++
+ &ehci0 {
+ status = "okay";
+ };
+@@ -108,13 +116,9 @@
+ status = "okay";
+
+ axp209: pmic@34 {
+- compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+-
+- interrupt-controller;
+- #interrupt-cells = <1>;
+ };
+ };
+
+@@ -142,6 +146,10 @@
+ status = "okay";
+ };
+
++&otg_sram {
++ status = "okay";
++};
++
+ &pio {
+ ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 {
+ allwinner,pins = "PH2";
+@@ -157,8 +165,15 @@
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
++ usb0_id_detect_pin: usb0_id_detect_pin@0 {
++ allwinner,pins = "PH4";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
++
+ usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 {
+- allwinner,pins = "PH11";
++ allwinner,pins = "PD2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+@@ -171,13 +186,37 @@
+ status = "okay";
+ };
+
+-&reg_usb1_vbus {
+- pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>;
+- gpio = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+- status = "okay";
++#include "axp209.dtsi"
++
++&reg_dcdc2 {
++ regulator-always-on;
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-cpu";
++};
++
++&reg_dcdc3 {
++ regulator-always-on;
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-int-pll";
++};
++
++&reg_ldo1 {
++ regulator-name = "vdd-rtc";
++};
++
++&reg_ldo2 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "avcc";
+ };
+
+-&reg_usb2_vbus {
++/* A single regulator (U24) powers both USB host ports. */
++&reg_usb1_vbus {
++ pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>;
++ gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
+ status = "okay";
+ };
+
+@@ -187,8 +226,16 @@
+ status = "okay";
+ };
+
++&usb_otg {
++ dr_mode = "otg";
++ status = "okay";
++};
++
+ &usbphy {
++ pinctrl-names = "default";
++ pinctrl-0 = <&usb0_id_detect_pin>;
++ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+- usb2_vbus-supply = <&reg_usb2_vbus>;
++ usb2_vbus-supply = <&reg_usb1_vbus>;
+ status = "okay";
+ };
+diff --git a/arch/arm/dts/sun7i-a20-pcduino3.dts b/arch/arm/dts/sun7i-a20-pcduino3.dts
+index afc9ece..1a8b39b 100644
+--- a/arch/arm/dts/sun7i-a20-pcduino3.dts
++++ b/arch/arm/dts/sun7i-a20-pcduino3.dts
+@@ -111,6 +111,14 @@
+ allwinner,pins = "PH2";
+ };
+
++&codec {
++ status = "okay";
++};
++
++&cpu0 {
++ cpu-supply = <&reg_dcdc2>;
++};
++
+ &ehci0 {
+ status = "okay";
+ };
+@@ -137,16 +145,14 @@
+ status = "okay";
+
+ axp209: pmic@34 {
+- compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+-
+- interrupt-controller;
+- #interrupt-cells = <1>;
+ };
+ };
+
++#include "axp209.dtsi"
++
+ &ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+@@ -171,6 +177,10 @@
+ status = "okay";
+ };
+
++&otg_sram {
++ status = "okay";
++};
++
+ &pio {
+ led_pins_pcduino3: led_pins@0 {
+ allwinner,pins = "PH15", "PH16";
+@@ -185,6 +195,13 @@
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
++
++ usb0_id_detect_pin: usb0_id_detect_pin@0 {
++ allwinner,pins = "PH4";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
+ };
+
+ &reg_ahci_5v {
+@@ -192,6 +209,31 @@
+ status = "okay";
+ };
+
++&reg_dcdc2 {
++ regulator-always-on;
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-cpu";
++};
++
++&reg_dcdc3 {
++ regulator-always-on;
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-int-pll";
++};
++
++&reg_ldo1 {
++ regulator-name = "vdd-rtc";
++};
++
++&reg_ldo2 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "avcc";
++};
++
+ &reg_usb1_vbus {
+ status = "okay";
+ };
+@@ -206,7 +248,15 @@
+ status = "okay";
+ };
+
++&usb_otg {
++ dr_mode = "otg";
++ status = "okay";
++};
++
+ &usbphy {
++ pinctrl-names = "default";
++ pinctrl-0 = <&usb0_id_detect_pin>;
++ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ usb2_vbus-supply = <&reg_usb2_vbus>;
+ status = "okay";
+diff --git a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
+index 83c6d3f..2f6b21a 100644
+--- a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
++++ b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
+@@ -48,6 +48,7 @@
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
++#include <dt-bindings/pwm/pwm.h>
+
+ / {
+ model = "Wexler TAB7200";
+@@ -57,11 +58,28 @@
+ serial0 = &uart0;
+ };
+
++ backlight {
++ compatible = "pwm-backlight";
++ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
++ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
++ default-brightness-level = <8>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&bl_enable_pin>;
++ enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
++ };
++
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+ };
+
++&codec {
++ pinctrl-names = "default";
++ pinctrl-0 = <&codec_pa_pin>;
++ allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
++ status = "okay";
++};
++
+ &cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+ };
+@@ -86,6 +104,8 @@
+ };
+ };
+
++#include "axp209.dtsi"
++
+ &i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+@@ -96,6 +116,18 @@
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
++
++ gt911: touchscreen@5d {
++ compatible = "goodix,gt911";
++ reg = <0x5d>;
++ interrupt-parent = <&pio>;
++ interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
++ pinctrl-names = "default";
++ pinctrl-0 = <&ts_reset_pin>;
++ irq-gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* INT (PH21) */
++ reset-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* RST (PB13) */
++ touchscreen-swapped-x-y;
++ };
+ };
+
+ &lradc {
+@@ -135,7 +167,45 @@
+ status = "okay";
+ };
+
+-#include "axp209.dtsi"
++&otg_sram {
++ status = "okay";
++};
++
++&pio {
++ bl_enable_pin: bl_enable_pin@0 {
++ allwinner,pins = "PH7";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
++ codec_pa_pin: codec_pa_pin@0 {
++ allwinner,pins = "PH15";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
++ ts_reset_pin: ts_reset_pin@0 {
++ allwinner,pins = "PB13";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
++ usb0_id_detect_pin: usb0_id_detect_pin@0 {
++ allwinner,pins = "PH4";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
++};
++
++&pwm {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pwm0_pins_a>;
++ status = "okay";
++};
+
+ &reg_dcdc2 {
+ regulator-always-on;
+@@ -162,6 +232,10 @@
+ regulator-name = "avcc";
+ };
+
++&reg_usb0_vbus {
++ status = "okay";
++};
++
+ &reg_usb1_vbus {
+ status = "okay";
+ };
+@@ -176,7 +250,21 @@
+ status = "okay";
+ };
+
++&usb_otg {
++ dr_mode = "otg";
++ status = "okay";
++};
++
++&usb_power_supply {
++ status = "okay";
++};
++
+ &usbphy {
++ pinctrl-names = "default";
++ pinctrl-0 = <&usb0_id_detect_pin>;
++ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
++ usb0_vbus_power-supply = <&usb_power_supply>;
++ usb0_vbus-supply = <&reg_usb0_vbus>;
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ usb2_vbus-supply = <&reg_usb2_vbus>;
+ status = "okay";
+diff --git a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
+index e7d84fe..dc31d47 100644
+--- a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
++++ b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
+@@ -1,13 +1,52 @@
+ /*
+- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
++ * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
+ *
+- * Minimal dts file for the Wits Pro A20 DKT for u-boot only
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
+ *
+- * SPDX-License-Identifier: GPL-2.0+ or X11
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+ /dts-v1/;
+ #include "sun7i-a20.dtsi"
++#include "sunxi-common-regulators.dtsi"
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/interrupt-controller/irq.h>
+
+ / {
+ model = "Wits Pro A20 DKT";
+@@ -20,6 +59,17 @@
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
++
++ mmc3_pwrseq: mmc3_pwrseq {
++ compatible = "mmc-pwrseq-simple";
++ pinctrl-names = "default";
++ pinctrl-0 = <&vmmc3_pin_ap6xxx_wl_regon>;
++ reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
++ };
++};
++
++&cpu0 {
++ cpu-supply = <&reg_dcdc2>;
+ };
+
+ &ehci0 {
+@@ -42,6 +92,60 @@
+ };
+ };
+
++&i2c0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c0_pins_a>;
++ status = "okay";
++
++ axp209: pmic@34 {
++ reg = <0x34>;
++ interrupt-parent = <&nmi_intc>;
++ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
++ };
++};
++
++&i2c1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c1_pins_a>;
++ status = "okay";
++};
++
++&i2c2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c2_pins_a>;
++ status = "okay";
++};
++
++#include "axp209.dtsi"
++
++&mmc0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
++ vmmc-supply = <&reg_vcc3v3>;
++ bus-width = <4>;
++ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
++ cd-inverted;
++ status = "okay";
++};
++
++&mmc3 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc3_pins_a>;
++ vmmc-supply = <&reg_vcc3v3>;
++ mmc-pwrseq = <&mmc3_pwrseq>;
++ bus-width = <4>;
++ non-removable;
++ status = "okay";
++
++ brcmf: bcrmf@1 {
++ reg = <1>;
++ compatible = "brcm,bcm4329-fmac";
++ interrupt-parent = <&pio>;
++ interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
++ interrupt-names = "host-wake";
++ };
++};
++
+ &ohci0 {
+ status = "okay";
+ };
+@@ -50,8 +154,85 @@
+ status = "okay";
+ };
+
++&otg_sram {
++ status = "okay";
++};
++
++&pio {
++ vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 {
++ allwinner,pins = "PH9";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
++ usb0_id_detect_pin: usb0_id_detect_pin@0 {
++ allwinner,pins = "PH4";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
++};
++
++&reg_dcdc2 {
++ regulator-always-on;
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1450000>;
++ regulator-name = "vdd-cpu";
++};
++
++&reg_dcdc3 {
++ regulator-always-on;
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-int-dll";
++};
++
++&reg_ldo1 {
++ regulator-name = "vdd-rtc";
++};
++
++&reg_ldo2 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "avcc";
++};
++
++&reg_usb0_vbus {
++ status = "okay";
++};
++
++&reg_usb1_vbus {
++ status = "okay";
++};
++
++&reg_usb2_vbus {
++ status = "okay";
++};
++
+ &uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+ };
++
++&usb_otg {
++ dr_mode = "otg";
++ status = "okay";
++};
++
++&usb_power_supply {
++ status = "okay";
++};
++
++&usbphy {
++ pinctrl-names = "default";
++ pinctrl-0 = <&usb0_id_detect_pin>;
++ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
++ usb0_vbus_power-supply = <&usb_power_supply>;
++ usb0_vbus-supply = <&reg_usb0_vbus>;
++ usb1_vbus-supply = <&reg_usb1_vbus>;
++ usb2_vbus-supply = <&reg_usb2_vbus>;
++ status = "okay";
++};
+diff --git a/arch/arm/dts/sun7i-a20.dtsi b/arch/arm/dts/sun7i-a20.dtsi
+index 71ab6b8..0940a78 100644
+--- a/arch/arm/dts/sun7i-a20.dtsi
++++ b/arch/arm/dts/sun7i-a20.dtsi
+@@ -47,6 +47,7 @@
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/thermal/thermal.h>
+
++#include <dt-bindings/clock/sun4i-a10-pll2.h>
+ #include <dt-bindings/dma/sun4i-a10.h>
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
+
+@@ -67,7 +68,7 @@
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0-hdmi";
+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+- <&ahb_gates 44>;
++ <&ahb_gates 44>, <&dram_gates 26>;
+ status = "disabled";
+ };
+
+@@ -75,7 +76,8 @@
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0";
+- clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
++ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
++ <&dram_gates 26>;
+ status = "disabled";
+ };
+
+@@ -84,7 +86,7 @@
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0-tve0";
+ clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
+- <&ahb_gates 44>;
++ <&ahb_gates 44>, <&dram_gates 26>;
+ status = "disabled";
+ };
+ };
+@@ -107,7 +109,7 @@
+ 720000 1200000
+ 528000 1100000
+ 312000 1000000
+- 144000 900000
++ 144000 1000000
+ >;
+ #cooling-cells = <2>;
+ cooling-min-level = <0>;
+@@ -199,6 +201,15 @@
+ clock-output-names = "pll1";
+ };
+
++ pll2: clk@01c20008 {
++ #clock-cells = <1>;
++ compatible = "allwinner,sun4i-a10-pll2-clk";
++ reg = <0x01c20008 0x8>;
++ clocks = <&osc24M>;
++ clock-output-names = "pll2-1x", "pll2-2x",
++ "pll2-4x", "pll2-8x";
++ };
++
+ pll4: clk@01c20018 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun7i-a20-pll4-clk";
+@@ -267,6 +278,19 @@
+ compatible = "allwinner,sun7i-a20-ahb-gates-clk";
+ reg = <0x01c20060 0x8>;
+ clocks = <&ahb>;
++ clock-indices = <0>, <1>,
++ <2>, <3>, <4>,
++ <5>, <6>, <7>, <8>,
++ <9>, <10>, <11>, <12>,
++ <13>, <14>, <16>,
++ <17>, <18>, <20>, <21>,
++ <22>, <23>, <25>,
++ <28>, <32>, <33>, <34>,
++ <35>, <36>, <37>, <40>,
++ <41>, <42>, <43>,
++ <44>, <45>, <46>,
++ <47>, <49>, <50>,
++ <52>;
+ clock-output-names = "ahb_usb0", "ahb_ehci0",
+ "ahb_ohci0", "ahb_ehci1", "ahb_ohci1",
+ "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
+@@ -295,6 +319,10 @@
+ compatible = "allwinner,sun7i-a20-apb0-gates-clk";
+ reg = <0x01c20068 0x4>;
+ clocks = <&apb0>;
++ clock-indices = <0>, <1>,
++ <2>, <3>, <4>,
++ <5>, <6>, <7>,
++ <8>, <10>;
+ clock-output-names = "apb0_codec", "apb0_spdif",
+ "apb0_ac97", "apb0_iis0", "apb0_iis1",
+ "apb0_pio", "apb0_ir0", "apb0_ir1",
+@@ -314,6 +342,12 @@
+ compatible = "allwinner,sun7i-a20-apb1-gates-clk";
+ reg = <0x01c2006c 0x4>;
+ clocks = <&apb1>;
++ clock-indices = <0>, <1>,
++ <2>, <3>, <4>,
++ <5>, <6>, <7>,
++ <15>, <16>, <17>,
++ <18>, <19>, <20>,
++ <21>, <22>, <23>;
+ clock-output-names = "apb1_i2c0", "apb1_i2c1",
+ "apb1_i2c2", "apb1_i2c3", "apb1_can",
+ "apb1_scr", "apb1_ps20", "apb1_ps21",
+@@ -442,6 +476,14 @@
+ clock-output-names = "ir1";
+ };
+
++ keypad_clk: clk@01c200c4 {
++ #clock-cells = <0>;
++ compatible = "allwinner,sun4i-a10-mod0-clk";
++ reg = <0x01c200c4 0x4>;
++ clocks = <&osc24M>;
++ clock-output-names = "keypad";
++ };
++
+ usb_clk: clk@01c200cc {
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+@@ -460,6 +502,48 @@
+ clock-output-names = "spi3";
+ };
+
++ dram_gates: clk@01c20100 {
++ #clock-cells = <1>;
++ compatible = "allwinner,sun4i-a10-dram-gates-clk";
++ reg = <0x01c20100 0x4>;
++ clocks = <&pll5 0>;
++ clock-indices = <0>,
++ <1>, <2>,
++ <3>,
++ <4>,
++ <5>, <6>,
++ <15>,
++ <24>, <25>,
++ <26>, <27>,
++ <28>, <29>;
++ clock-output-names = "dram_ve",
++ "dram_csi0", "dram_csi1",
++ "dram_ts",
++ "dram_tvd",
++ "dram_tve0", "dram_tve1",
++ "dram_output",
++ "dram_de_fe1", "dram_de_fe0",
++ "dram_de_be0", "dram_de_be1",
++ "dram_de_mp", "dram_ace";
++ };
++
++ ve_clk: clk@01c2013c {
++ #clock-cells = <0>;
++ #reset-cells = <0>;
++ compatible = "allwinner,sun4i-a10-ve-clk";
++ reg = <0x01c2013c 0x4>;
++ clocks = <&pll4>;
++ clock-output-names = "ve";
++ };
++
++ codec_clk: clk@01c20140 {
++ #clock-cells = <0>;
++ compatible = "allwinner,sun4i-a10-codec-clk";
++ reg = <0x01c20140 0x4>;
++ clocks = <&pll2 SUN4I_A10_PLL2_1X>;
++ clock-output-names = "codec";
++ };
++
+ mbus_clk: clk@01c2015c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun5i-a13-mbus-clk";
+@@ -744,6 +828,14 @@
+ status = "disabled";
+ };
+
++ crypto: crypto-engine@01c15000 {
++ compatible = "allwinner,sun4i-a10-crypto";
++ reg = <0x01c15000 0x1000>;
++ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ahb_gates 5>, <&ss_clk>;
++ clock-names = "ahb", "mod";
++ };
++
+ spi2: spi@01c17000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c17000 0x1000>;
+@@ -1159,6 +1251,19 @@
+ status = "disabled";
+ };
+
++ codec: codec@01c22c00 {
++ #sound-dai-cells = <0>;
++ compatible = "allwinner,sun7i-a20-codec";
++ reg = <0x01c22c00 0x40>;
++ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&apb0_gates 0>, <&codec_clk>;
++ clock-names = "apb", "codec";
++ dmas = <&dma SUN4I_DMA_NORMAL 19>,
++ <&dma SUN4I_DMA_NORMAL 19>;
++ dma-names = "rx", "tx";
++ status = "disabled";
++ };
++
+ sid: eeprom@01c23800 {
+ compatible = "allwinner,sun7i-a20-sid";
+ reg = <0x01c23800 0x200>;
+diff --git a/arch/arm/dts/sun8i-a23-a33.dtsi b/arch/arm/dts/sun8i-a23-a33.dtsi
+index 9c4a55c..7e05e09 100644
+--- a/arch/arm/dts/sun8i-a23-a33.dtsi
++++ b/arch/arm/dts/sun8i-a23-a33.dtsi
+@@ -56,7 +56,7 @@
+ #size-cells = <1>;
+ ranges;
+
+- framebuffer@0 {
++ simplefb_lcd: framebuffer@0 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0";
+@@ -175,27 +175,13 @@
+ clock-output-names = "apb1";
+ };
+
+- ahb1_gates: clk@01c20060 {
+- #clock-cells = <1>;
+- compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
+- reg = <0x01c20060 0x8>;
+- clocks = <&ahb1>;
+- clock-output-names = "ahb1_mipidsi", "ahb1_dma",
+- "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
+- "ahb1_nand", "ahb1_sdram",
+- "ahb1_hstimer", "ahb1_spi0",
+- "ahb1_spi1", "ahb1_otg", "ahb1_ehci",
+- "ahb1_ohci", "ahb1_ve", "ahb1_lcd",
+- "ahb1_csi", "ahb1_be", "ahb1_fe",
+- "ahb1_gpu", "ahb1_spinlock",
+- "ahb1_drc";
+- };
+-
+ apb1_gates: clk@01c20068 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun8i-a23-apb1-gates-clk";
+ reg = <0x01c20068 0x4>;
+ clocks = <&apb1>;
++ clock-indices = <0>, <5>,
++ <12>, <13>;
+ clock-output-names = "apb1_codec", "apb1_pio",
+ "apb1_daudio0", "apb1_daudio1";
+ };
+@@ -213,6 +199,10 @@
+ compatible = "allwinner,sun8i-a23-apb2-gates-clk";
+ reg = <0x01c2006c 0x4>;
+ clocks = <&apb2>;
++ clock-indices = <0>, <1>,
++ <2>, <16>,
++ <17>, <18>,
++ <19>, <20>;
+ clock-output-names = "apb2_i2c0", "apb2_i2c1",
+ "apb2_i2c2", "apb2_uart0",
+ "apb2_uart1", "apb2_uart2",
+@@ -391,12 +381,19 @@
+ allwinner,pins = "PC5", "PC6", "PC8",
+ "PC9", "PC10", "PC11",
+ "PC12", "PC13", "PC14",
+- "PC15";
++ "PC15", "PC16";
+ allwinner,function = "mmc2";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
++ pwm0_pins: pwm0 {
++ allwinner,pins = "PH0";
++ allwinner,function = "pwm0";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
+ i2c0_pins_a: i2c0@0 {
+ allwinner,pins = "PH2", "PH3";
+ allwinner,function = "i2c0";
+@@ -451,6 +448,14 @@
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
++ pwm: pwm@01c21400 {
++ compatible = "allwinner,sun7i-a20-pwm";
++ reg = <0x01c21400 0xc>;
++ clocks = <&osc24M>;
++ #pwm-cells = <3>;
++ status = "disabled";
++ };
++
+ lradc: lradc@01c22800 {
+ compatible = "allwinner,sun4i-a10-lradc-keys";
+ reg = <0x01c22800 0x100>;
+@@ -574,6 +579,14 @@
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
++ nmi_intc: interrupt-controller@01f00c0c {
++ compatible = "allwinner,sun6i-a31-sc-nmi";
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ reg = <0x01f00c0c 0x38>;
++ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
++ };
++
+ prcm@01f01400 {
+ compatible = "allwinner,sun8i-a23-prcm";
+ reg = <0x01f01400 0x200>;
+@@ -642,10 +655,18 @@
+ resets = <&apb0_rst 0>;
+ gpio-controller;
+ interrupt-controller;
++ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #gpio-cells = <3>;
+
++ r_rsb_pins: r_rsb {
++ allwinner,pins = "PL0", "PL1";
++ allwinner,function = "s_rsb";
++ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
++
+ r_uart_pins_a: r_uart@0 {
+ allwinner,pins = "PL2", "PL3";
+ allwinner,function = "s_uart";
+@@ -653,5 +674,19 @@
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+ };
++
++ r_rsb: rsb@01f03400 {
++ compatible = "allwinner,sun8i-a23-rsb";
++ reg = <0x01f03400 0x400>;
++ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&apb0_gates 3>;
++ clock-frequency = <3000000>;
++ resets = <&apb0_rst 3>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&r_rsb_pins>;
++ status = "disabled";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
+ };
+ };
+diff --git a/arch/arm/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/dts/sun8i-a23-gt90h-v4.dts
+index 1aeb06c..b2ce284 100644
+--- a/arch/arm/dts/sun8i-a23-gt90h-v4.dts
++++ b/arch/arm/dts/sun8i-a23-gt90h-v4.dts
+@@ -47,15 +47,26 @@
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
++#include <dt-bindings/pwm/pwm.h>
+
+ / {
+- model = "Allwinner GT90H Quad Core Tablet (v4)";
+- compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a33";
++ model = "Allwinner GT90H Dual Core Tablet (v4)";
++ compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a23";
+
+ aliases {
+ serial0 = &r_uart;
+ };
+
++ backlight: backlight {
++ compatible = "pwm-backlight";
++ pinctrl-names = "default";
++ pinctrl-0 = <&bl_en_pin_gt90h>;
++ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
++ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
++ default-brightness-level = <8>;
++ enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
++ };
++
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+@@ -106,8 +117,7 @@
+ &mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gt90h>;
+- /* FIXME this really is aldo1, correct once we've pmic support */
+- vmmc-supply = <&reg_vcc3v0>;
++ vmmc-supply = <&reg_aldo1>;
+ bus-width = <4>;
+ cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+ cd-inverted;
+@@ -115,6 +125,13 @@
+ };
+
+ &pio {
++ bl_en_pin_gt90h: bl_en_pin@0 {
++ allwinner,pins = "PH6";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
+ mmc0_cd_pin_gt90h: mmc0_cd_pin@0 {
+ allwinner,pins = "PB4";
+ allwinner,function = "gpio_in";
+@@ -123,12 +140,106 @@
+ };
+ };
+
++&pwm {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pwm0_pins>;
++ status = "okay";
++};
++
++&r_rsb {
++ status = "okay";
++
++ axp22x: pmic@3a3 {
++ compatible = "x-powers,axp223";
++ reg = <0x3a3>;
++ interrupt-parent = <&nmi_intc>;
++ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
++ eldoin-supply = <&reg_dcdc1>;
++ };
++};
++
+ &r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins_a>;
+ status = "okay";
+ };
+
++#include "axp22x.dtsi"
++
++&reg_aldo1 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "vcc-io";
++};
++
++&reg_aldo2 {
++ regulator-always-on;
++ regulator-min-microvolt = <2350000>;
++ regulator-max-microvolt = <2650000>;
++ regulator-name = "vdd-dll";
++};
++
++&reg_aldo3 {
++ regulator-always-on;
++ regulator-min-microvolt = <2700000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-pll-avcc";
++};
++
++&reg_dc1sw {
++ regulator-name = "vcc-lcd";
++};
++
++&reg_dc5ldo {
++ regulator-always-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-cpus";
++};
++
++&reg_dcdc1 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "vcc-3v0";
++};
++
++&reg_dcdc2 {
++ regulator-always-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-sys";
++};
++
++&reg_dcdc3 {
++ regulator-always-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-cpu";
++};
++
++&reg_dcdc5 {
++ regulator-always-on;
++ regulator-min-microvolt = <1500000>;
++ regulator-max-microvolt = <1500000>;
++ regulator-name = "vcc-dram";
++};
++
++&reg_dldo1 {
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-wifi";
++};
++
++&reg_rtc_ldo {
++ regulator-name = "vcc-rtc";
++};
++
++&simplefb_lcd {
++ vcc-lcd-supply = <&reg_dc1sw>;
++};
++
+ /*
+ * FIXME for now we only support host mode and rely on u-boot to have
+ * turned on Vbus which is controlled by the axp223 pmic on the board.
+@@ -141,5 +252,6 @@
+ };
+
+ &usbphy {
++ usb1_vbus-supply = <&reg_dldo1>;
+ status = "okay";
+ };
+diff --git a/arch/arm/dts/sun8i-a23.dtsi b/arch/arm/dts/sun8i-a23.dtsi
+index 2cc27c7..92e6616 100644
+--- a/arch/arm/dts/sun8i-a23.dtsi
++++ b/arch/arm/dts/sun8i-a23.dtsi
+@@ -50,6 +50,31 @@
+ };
+
+ clocks {
++ ahb1_gates: clk@01c20060 {
++ #clock-cells = <1>;
++ compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
++ reg = <0x01c20060 0x8>;
++ clocks = <&ahb1>;
++ clock-indices = <1>, <6>,
++ <8>, <9>, <10>,
++ <13>, <14>,
++ <19>, <20>,
++ <21>, <24>, <26>,
++ <29>, <32>, <36>,
++ <40>, <44>, <46>,
++ <52>, <53>,
++ <54>, <57>;
++ clock-output-names = "ahb1_mipidsi", "ahb1_dma",
++ "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
++ "ahb1_nand", "ahb1_sdram",
++ "ahb1_hstimer", "ahb1_spi0",
++ "ahb1_spi1", "ahb1_otg", "ahb1_ehci",
++ "ahb1_ohci", "ahb1_ve", "ahb1_lcd",
++ "ahb1_csi", "ahb1_be", "ahb1_fe",
++ "ahb1_gpu", "ahb1_msgbox",
++ "ahb1_spinlock", "ahb1_drc";
++ };
++
+ mbus_clk: clk@01c2015c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun8i-a23-mbus-clk";
+diff --git a/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts
+index 1d5390d..fef6abc 100644
+--- a/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts
++++ b/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts
+@@ -68,7 +68,7 @@
+ };
+
+ &lradc {
+- vref-supply = <&reg_vcc3v0>;
++ vref-supply = <&reg_dcdc1>;
+ status = "okay";
+
+ button@200 {
+@@ -96,7 +96,7 @@
+ &mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>;
+- vmmc-supply = <&reg_vcc3v0>;
++ vmmc-supply = <&reg_dcdc1>;
+ bus-width = <4>;
+ cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+ cd-inverted;
+@@ -106,13 +106,16 @@
+ &mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+- vmmc-supply = <&reg_vcc3v0>;
++ vmmc-supply = <&reg_dcdc1>;
+ bus-width = <8>;
+ non-removable;
++ cap-mmc-hw-reset;
+ status = "okay";
+ };
+
+ &mmc2_8bit_pins {
++ /* Increase drive strength for DDR modes */
++ allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+ /* eMMC is missing pull-ups */
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+@@ -130,6 +133,80 @@
+ };
+ };
+
++&r_rsb {
++ status = "okay";
++
++ axp22x: pmic@3a3 {
++ compatible = "x-powers,axp223";
++ reg = <0x3a3>;
++ interrupt-parent = <&nmi_intc>;
++ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
++ eldoin-supply = <&reg_dcdc1>;
++ };
++};
++
++#include "axp22x.dtsi"
++
++&reg_aldo1 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "vcc-io";
++};
++
++&reg_aldo2 {
++ regulator-always-on;
++ regulator-min-microvolt = <2350000>;
++ regulator-max-microvolt = <2650000>;
++ regulator-name = "vdd-dll";
++};
++
++&reg_aldo3 {
++ regulator-always-on;
++ regulator-min-microvolt = <2700000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-pll-avcc";
++};
++
++&reg_dc5ldo {
++ regulator-always-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-cpus";
++};
++
++&reg_dcdc1 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "vcc-3v0";
++};
++
++&reg_dcdc2 {
++ regulator-always-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-sys";
++};
++
++&reg_dcdc3 {
++ regulator-always-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-cpu";
++};
++
++&reg_dcdc5 {
++ regulator-always-on;
++ regulator-min-microvolt = <1500000>;
++ regulator-max-microvolt = <1500000>;
++ regulator-name = "vcc-dram";
++};
++
++&reg_rtc_ldo {
++ regulator-name = "vcc-rtc";
++};
++
+ &uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_b>;
+diff --git a/arch/arm/dts/sun8i-a33.dtsi b/arch/arm/dts/sun8i-a33.dtsi
+index faa7d3c..001d840 100644
+--- a/arch/arm/dts/sun8i-a33.dtsi
++++ b/arch/arm/dts/sun8i-a33.dtsi
+@@ -72,6 +72,41 @@
+ clock-output-names = "pll11";
+ };
+
++ ahb1_gates: clk@01c20060 {
++ #clock-cells = <1>;
++ compatible = "allwinner,sun8i-a33-ahb1-gates-clk";
++ reg = <0x01c20060 0x8>;
++ clocks = <&ahb1>;
++ clock-indices = <1>, <5>,
++ <6>, <8>, <9>,
++ <10>, <13>, <14>,
++ <19>, <20>,
++ <21>, <24>, <26>,
++ <29>, <32>, <36>,
++ <40>, <44>, <46>,
++ <52>, <53>,
++ <54>, <57>,
++ <58>;
++ clock-output-names = "ahb1_mipidsi", "ahb1_ss",
++ "ahb1_dma","ahb1_mmc0", "ahb1_mmc1",
++ "ahb1_mmc2", "ahb1_nand", "ahb1_sdram",
++ "ahb1_hstimer", "ahb1_spi0",
++ "ahb1_spi1", "ahb1_otg", "ahb1_ehci",
++ "ahb1_ohci", "ahb1_ve", "ahb1_lcd",
++ "ahb1_csi", "ahb1_be", "ahb1_fe",
++ "ahb1_gpu", "ahb1_msgbox",
++ "ahb1_spinlock", "ahb1_drc",
++ "ahb1_sat";
++ };
++
++ ss_clk: clk@01c2009c {
++ #clock-cells = <0>;
++ compatible = "allwinner,sun4i-a10-mod0-clk";
++ reg = <0x01c2009c 0x4>;
++ clocks = <&osc24M>, <&pll6 0>;
++ clock-output-names = "ss";
++ };
++
+ mbus_clk: clk@01c2015c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun8i-a23-mbus-clk";
+@@ -82,6 +117,16 @@
+ };
+
+ soc@01c00000 {
++ crypto: crypto-engine@01c15000 {
++ compatible = "allwinner,sun4i-a10-crypto";
++ reg = <0x01c15000 0x1000>;
++ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ahb1_gates 5>, <&ss_clk>;
++ clock-names = "ahb", "mod";
++ resets = <&ahb1_rst 5>;
++ reset-names = "ahb";
++ };
++
+ usb_otg: usb@01c19000 {
+ compatible = "allwinner,sun8i-a33-musb";
+ reg = <0x01c19000 0x0400>;
+diff --git a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
+new file mode 100644
+index 0000000..88b1e09
+--- /dev/null
++++ b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
+@@ -0,0 +1,65 @@
++/*
++ * Copyright 2015 Chen-Yu Tsai
++ *
++ * Chen-Yu Tsai <wens@csie.org>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++#include "sun8i-a83t.dtsi"
++
++/ {
++ model = "Cubietech Cubietruck Plus";
++ compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t";
++
++ aliases {
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++};
++
++&uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pins_b>;
++ status = "okay";
++};
+diff --git a/arch/arm/dts/sun8i-a83t.dtsi b/arch/arm/dts/sun8i-a83t.dtsi
+index 245b819..d3473f8 100644
+--- a/arch/arm/dts/sun8i-a83t.dtsi
++++ b/arch/arm/dts/sun8i-a83t.dtsi
+@@ -52,12 +52,6 @@
+ / {
+ interrupt-parent = <&gic>;
+
+- chosen {
+- #address-cells = <1>;
+- #size-cells = <1>;
+- ranges;
+- };
+-
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+@@ -85,6 +79,7 @@
+ device_type = "cpu";
+ reg = <3>;
+ };
++
+ cpu@100 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+@@ -96,6 +91,7 @@
+ device_type = "cpu";
+ reg = <0x101>;
+ };
++
+ cpu@102 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+@@ -109,18 +105,12 @@
+ };
+ };
+
+- memory {
+- reg = <0x40000000 0x80000000>;
+- };
+-
+ timer {
+ compatible = "arm,armv7-timer";
+- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+- clock-frequency = <24000000>;
+- arm,cpu-registers-not-fw-configured;
++ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ clocks {
+@@ -128,6 +118,7 @@
+ #size-cells = <1>;
+ ranges;
+
++ /* TODO: PRCM block has a mux for this. */
+ osc24M: osc24M_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+@@ -135,36 +126,39 @@
+ clock-output-names = "osc24M";
+ };
+
+- osc32k: osc32k_clk {
++ /*
++ * This is called "internal OSC" in some places.
++ * It is an internal RC-based oscillator.
++ * TODO: Its controls are in the PRCM block.
++ */
++ osc16M: osc16M_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+- clock-frequency = <32768>;
+- clock-output-names = "osc32k";
++ clock-frequency = <16000000>;
++ clock-output-names = "osc16M";
++ };
++
++ osc16Md512: osc16Md512_clk {
++ #clock-cells = <0>;
++ compatible = "fixed-factor-clock";
++ clock-div = <512>;
++ clock-mult = <1>;
++ clocks = <&osc16M>;
++ clock-output-names = "osc16M-d512";
+ };
+ };
+
+- soc@01c00000 {
++ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+- gic: interrupt-controller@01c81000 {
+- compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+- reg = <0x01c81000 0x1000>,
+- <0x01c82000 0x1000>,
+- <0x01c84000 0x2000>,
+- <0x01c86000 0x2000>;
+- interrupt-controller;
+- #interrupt-cells = <3>;
+- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+- };
+-
+ pio: pinctrl@01c20800 {
+ compatible = "allwinner,sun8i-a83t-pinctrl";
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+- <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+- <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
++ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x01c20800 0x400>;
+ clocks = <&osc24M>;
+ gpio-controller;
+@@ -172,27 +166,6 @@
+ #interrupt-cells = <3>;
+ #gpio-cells = <3>;
+
+- i2c0_pins_a: i2c0@0 {
+- allwinner,pins = "PH0", "PH1";
+- allwinner,function = "i2c0";
+- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+- };
+-
+- i2c1_pins_a: i2c1@0 {
+- allwinner,pins = "PH2", "PH3";
+- allwinner,function = "i2c1";
+- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+- };
+-
+- i2c2_pins_a: i2c2@0 {
+- allwinner,pins = "PH4", "PH5";
+- allwinner,function = "i2c2";
+- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+- };
+-
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0", "PF1", "PF2",
+ "PF3", "PF4", "PF5";
+@@ -201,24 +174,6 @@
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+- mmc1_pins_a: mmc1@0 {
+- allwinner,pins = "PG0", "PG1", "PG2",
+- "PG3", "PG4", "PG5";
+- allwinner,function = "mmc1";
+- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+- };
+-
+- mmc2_8bit_pins: mmc2_8bit {
+- allwinner,pins = "PC5", "PC6", "PC8",
+- "PC9", "PC10", "PC11",
+- "PC12", "PC13", "PC14",
+- "PC15";
+- allwinner,function = "mmc2";
+- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+- };
+-
+ uart0_pins_a: uart0@0 {
+ allwinner,pins = "PF2", "PF4";
+ allwinner,function = "uart0";
+@@ -234,6 +189,21 @@
+ };
+ };
+
++ timer@01c20c00 {
++ compatible = "allwinner,sun4i-a10-timer";
++ reg = <0x01c20c00 0xa0>;
++ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&osc24M>;
++ };
++
++ watchdog@01c20ca0 {
++ compatible = "allwinner,sun6i-a31-wdt";
++ reg = <0x01c20ca0 0x20>;
++ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&osc24M>;
++ };
++
+ uart0: serial@01c28000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28000 0x400>;
+@@ -243,5 +213,16 @@
+ clocks = <&osc24M>;
+ status = "disabled";
+ };
++
++ gic: interrupt-controller@01c81000 {
++ compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
++ reg = <0x01c81000 0x1000>,
++ <0x01c82000 0x1000>,
++ <0x01c84000 0x2000>,
++ <0x01c86000 0x2000>;
++ interrupt-controller;
++ #interrupt-cells = <3>;
++ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
++ };
+ };
+ };
+diff --git a/arch/arm/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/dts/sun8i-h3-orangepi-pc.dts
+index 4b25dcc..30ccca0 100644
+--- a/arch/arm/dts/sun8i-h3-orangepi-pc.dts
++++ b/arch/arm/dts/sun8i-h3-orangepi-pc.dts
+@@ -45,6 +45,7 @@
+ #include "sunxi-common-regulators.dtsi"
+
+ #include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
+
+ / {
+@@ -58,6 +59,43 @@
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
++
++ leds {
++ compatible = "gpio-leds";
++ pinctrl-names = "default";
++ pinctrl-0 = <&leds_opc>;
++
++ status_led {
++ label = "status:red:user";
++ gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
++ r_leds {
++ compatible = "gpio-leds";
++ pinctrl-names = "default";
++ pinctrl-0 = <&leds_r_opc>;
++
++ tx {
++ label = "pwr:green:user";
++ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
++ default-state = "on";
++ };
++ };
++
++ r_gpio_keys {
++ compatible = "gpio-keys";
++ input-name = "sw4";
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&sw_r_opc>;
++
++ sw4@0 {
++ label = "sw4";
++ linux,code = <BTN_0>;
++ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
++ };
++ };
+ };
+
+ &ehci1 {
+@@ -72,6 +110,12 @@
+ status = "okay";
+ };
+
++&ir {
++ pinctrl-names = "default";
++ pinctrl-0 = <&ir_pins_a>;
++ status = "okay";
++};
++
+ &mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+@@ -94,6 +138,31 @@
+ status = "okay";
+ };
+
++&pio {
++ leds_opc: led_pins@0 {
++ allwinner,pins = "PA15";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++};
++
++&r_pio {
++ leds_r_opc: led_pins@0 {
++ allwinner,pins = "PL10";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
++ sw_r_opc: key_pins@0 {
++ allwinner,pins = "PL03";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++};
++
+ &uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-plus.dts
+index 1cb6c66..900ec4f 100644
+--- a/arch/arm/dts/sun8i-h3-orangepi-plus.dts
++++ b/arch/arm/dts/sun8i-h3-orangepi-plus.dts
+@@ -45,6 +45,7 @@
+ #include "sunxi-common-regulators.dtsi"
+
+ #include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
+
+ / {
+@@ -70,6 +71,68 @@
+ enable-active-high;
+ gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+ };
++
++ leds {
++ compatible = "gpio-leds";
++ pinctrl-names = "default";
++ pinctrl-0 = <&leds_opc>;
++
++ status_led {
++ label = "status:red:user";
++ gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
++ r_leds {
++ compatible = "gpio-leds";
++ pinctrl-names = "default";
++ pinctrl-0 = <&leds_r_opc>;
++
++ tx {
++ label = "pwr:green:user";
++ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
++ default-state = "on";
++ };
++ };
++
++ r_gpio_keys {
++ compatible = "gpio-keys";
++ input-name = "sw4";
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&sw_r_opc>;
++
++ sw4@0 {
++ label = "sw4";
++ linux,code = <BTN_0>;
++ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
++
++&pio {
++ leds_opc: led_pins@0 {
++ allwinner,pins = "PA15";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++};
++
++&r_pio {
++ leds_r_opc: led_pins@0 {
++ allwinner,pins = "PL10";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
++ sw_r_opc: key_pins@0 {
++ allwinner,pins = "PL03";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
+ };
+
+ &ehci1 {
+diff --git a/arch/arm/dts/sun8i-h3.dtsi b/arch/arm/dts/sun8i-h3.dtsi
+index 0faa38a..c2f63c5 100644
+--- a/arch/arm/dts/sun8i-h3.dtsi
++++ b/arch/arm/dts/sun8i-h3.dtsi
+@@ -83,12 +83,6 @@
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+- clock-frequency = <24000000>;
+- arm,cpu-registers-not-fw-configured;
+- };
+-
+- memory {
+- reg = <0x40000000 0x80000000>;
+ };
+
+ clocks {
+@@ -131,15 +125,24 @@
+ compatible = "allwinner,sun6i-a31-pll6-clk";
+ reg = <0x01c20028 0x4>;
+ clocks = <&osc24M>;
+- clock-output-names = "pll6", "pll6x2", "pll6d2";
++ clock-output-names = "pll6", "pll6x2";
+ };
+
+- pll8: clk@01c20044 {
+- #clock-cells = <1>;
+- compatible = "allwinner,sun6i-a31-pll6-clk";
+- reg = <0x01c20044 0x4>;
+- clocks = <&osc24M>;
+- clock-output-names = "pll8", "pll8x2";
++ pll6d2: pll6d2_clk {
++ #clock-cells = <0>;
++ compatible = "fixed-factor-clock";
++ clock-div = <2>;
++ clock-mult = <1>;
++ clocks = <&pll6 0>;
++ clock-output-names = "pll6d2";
++ };
++
++ /* dummy clock until pll6 can be reused */
++ pll8: pll8_clk {
++ #clock-cells = <0>;
++ compatible = "fixed-clock";
++ clock-frequency = <1>;
++ clock-output-names = "pll8";
+ };
+
+ cpu: cpu_clk@01c20050 {
+@@ -170,7 +173,7 @@
+ #clock-cells = <0>;
+ compatible = "allwinner,sun8i-h3-ahb2-clk";
+ reg = <0x01c2005c 0x4>;
+- clocks = <&ahb1>, <&pll6 2>;
++ clocks = <&ahb1>, <&pll6d2>;
+ clock-output-names = "ahb2";
+ };
+
+@@ -213,34 +216,34 @@
+ <76>, <77>, <78>,
+ <96>, <97>, <98>,
+ <112>, <113>,
+- <114>, <115>, <116>,
+- <128>, <135>;
+- clock-output-names = "ahb1_ce", "ahb1_dma", "ahb1_mmc0",
+- "ahb1_mmc1", "ahb1_mmc2", "ahb1_nand",
+- "ahb1_sdram", "ahb2_gmac", "ahb1_ts",
+- "ahb1_hstimer", "ahb1_spi0",
+- "ahb1_spi1", "ahb1_otg",
+- "ahb1_otg_ehci0", "ahb1_ehic1",
+- "ahb1_ehic2", "ahb1_ehic3",
+- "ahb1_otg_ohci0", "ahb2_ohic1",
+- "ahb2_ohic2", "ahb2_ohic3", "ahb1_ve",
+- "ahb1_lcd0", "ahb1_lcd1", "ahb1_deint",
+- "ahb1_csi", "ahb1_tve", "ahb1_hdmi",
+- "ahb1_de", "ahb1_gpu", "ahb1_msgbox",
+- "ahb1_spinlock", "apb1_codec",
+- "apb1_spdif", "apb1_pio", "apb1_ths",
+- "apb1_i2s0", "apb1_i2s1", "apb1_i2s2",
+- "apb2_i2c0", "apb2_i2c1", "apb2_i2c2",
+- "apb2_uart0", "apb2_uart1",
+- "apb2_uart2", "apb2_uart3", "apb2_scr",
+- "ahb1_ephy", "ahb1_dbg";
++ <114>, <115>,
++ <116>, <128>, <135>;
++ clock-output-names = "bus_ce", "bus_dma", "bus_mmc0",
++ "bus_mmc1", "bus_mmc2", "bus_nand",
++ "bus_sdram", "bus_gmac", "bus_ts",
++ "bus_hstimer", "bus_spi0",
++ "bus_spi1", "bus_otg",
++ "bus_otg_ehci0", "bus_ehci1",
++ "bus_ehci2", "bus_ehci3",
++ "bus_otg_ohci0", "bus_ohci1",
++ "bus_ohci2", "bus_ohci3", "bus_ve",
++ "bus_lcd0", "bus_lcd1", "bus_deint",
++ "bus_csi", "bus_tve", "bus_hdmi",
++ "bus_de", "bus_gpu", "bus_msgbox",
++ "bus_spinlock", "bus_codec",
++ "bus_spdif", "bus_pio", "bus_ths",
++ "bus_i2s0", "bus_i2s1", "bus_i2s2",
++ "bus_i2c0", "bus_i2c1", "bus_i2c2",
++ "bus_uart0", "bus_uart1",
++ "bus_uart2", "bus_uart3",
++ "bus_scr", "bus_ephy", "bus_dbg";
+ };
+
+ mmc0_clk: clk@01c20088 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-mmc-clk";
+ reg = <0x01c20088 0x4>;
+- clocks = <&osc24M>, <&pll6 0>, <&pll8 0>;
++ clocks = <&osc24M>, <&pll6 0>, <&pll8>;
+ clock-output-names = "mmc0",
+ "mmc0_output",
+ "mmc0_sample";
+@@ -250,7 +253,7 @@
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-mmc-clk";
+ reg = <0x01c2008c 0x4>;
+- clocks = <&osc24M>, <&pll6 0>, <&pll8 0>;
++ clocks = <&osc24M>, <&pll6 0>, <&pll8>;
+ clock-output-names = "mmc1",
+ "mmc1_output",
+ "mmc1_sample";
+@@ -260,7 +263,7 @@
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-mmc-clk";
+ reg = <0x01c20090 0x4>;
+- clocks = <&osc24M>, <&pll6 0>, <&pll8 0>;
++ clocks = <&osc24M>, <&pll6 0>, <&pll8>;
+ clock-output-names = "mmc2",
+ "mmc2_output",
+ "mmc2_sample";
+@@ -285,6 +288,33 @@
+ clocks = <&osc24M>, <&pll6 1>, <&pll5>;
+ clock-output-names = "mbus";
+ };
++
++ apb0: apb0_clk {
++ compatible = "fixed-factor-clock";
++ #clock-cells = <0>;
++ clock-div = <1>;
++ clock-mult = <1>;
++ clocks = <&osc24M>;
++ clock-output-names = "apb0";
++ };
++
++ apb0_gates: clk@01f01428 {
++ compatible = "allwinner,sun8i-h3-apb0-gates-clk",
++ "allwinner,sun4i-a10-gates-clk";
++ reg = <0x01f01428 0x4>;
++ #clock-cells = <1>;
++ clocks = <&apb0>;
++ clock-indices = <0>, <1>;
++ clock-output-names = "apb0_pio", "apb0_ir";
++ };
++
++ ir_clk: ir_clk@01f01454 {
++ compatible = "allwinner,sun4i-a10-mod0-clk";
++ reg = <0x01f01454 0x4>;
++ #clock-cells = <0>;
++ clocks = <&osc32k>, <&osc24M>;
++ clock-output-names = "ir";
++ };
+ };
+
+ soc {
+@@ -298,7 +328,7 @@
+ reg = <0x01c02000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bus_gates 6>;
+- resets = <&bus_rst 6>;
++ resets = <&ahb_rst 6>;
+ #dma-cells = <1>;
+ };
+
+@@ -313,7 +343,7 @@
+ "mmc",
+ "output",
+ "sample";
+- resets = <&bus_rst 8>;
++ resets = <&ahb_rst 8>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+@@ -332,7 +362,7 @@
+ "mmc",
+ "output",
+ "sample";
+- resets = <&bus_rst 9>;
++ resets = <&ahb_rst 9>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+@@ -351,7 +381,7 @@
+ "mmc",
+ "output",
+ "sample";
+- resets = <&bus_rst 10>;
++ resets = <&ahb_rst 10>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+@@ -396,7 +426,7 @@
+ reg = <0x01c1b000 0x100>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bus_gates 25>, <&bus_gates 29>;
+- resets = <&bus_rst 25>, <&bus_rst 29>;
++ resets = <&ahb_rst 25>, <&ahb_rst 29>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+@@ -408,7 +438,7 @@
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bus_gates 29>, <&bus_gates 25>,
+ <&usb_clk 17>;
+- resets = <&bus_rst 29>, <&bus_rst 25>;
++ resets = <&ahb_rst 29>, <&ahb_rst 25>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+@@ -419,7 +449,7 @@
+ reg = <0x01c1c000 0x100>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bus_gates 26>, <&bus_gates 30>;
+- resets = <&bus_rst 26>, <&bus_rst 30>;
++ resets = <&ahb_rst 26>, <&ahb_rst 30>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+@@ -431,7 +461,7 @@
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bus_gates 30>, <&bus_gates 26>,
+ <&usb_clk 18>;
+- resets = <&bus_rst 30>, <&bus_rst 26>;
++ resets = <&ahb_rst 30>, <&ahb_rst 26>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+@@ -442,7 +472,7 @@
+ reg = <0x01c1d000 0x100>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bus_gates 27>, <&bus_gates 31>;
+- resets = <&bus_rst 27>, <&bus_rst 31>;
++ resets = <&ahb_rst 27>, <&ahb_rst 31>;
+ phys = <&usbphy 3>;
+ phy-names = "usb";
+ status = "disabled";
+@@ -454,7 +484,7 @@
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bus_gates 31>, <&bus_gates 27>,
+ <&usb_clk 19>;
+- resets = <&bus_rst 31>, <&bus_rst 27>;
++ resets = <&ahb_rst 31>, <&ahb_rst 27>;
+ phys = <&usbphy 3>;
+ phy-names = "usb";
+ status = "disabled";
+@@ -469,7 +499,7 @@
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupt-controller;
+- #interrupt-cells = <2>;
++ #interrupt-cells = <3>;
+
+ uart0_pins_a: uart0@0 {
+ allwinner,pins = "PA4", "PA5";
+@@ -502,10 +532,22 @@
+ };
+ };
+
+- bus_rst: reset@01c202c0 {
++ ahb_rst: reset@01c202c0 {
+ #reset-cells = <1>;
+- compatible = "allwinner,sun8i-h3-bus-reset";
+- reg = <0x01c202c0 0x1c>;
++ compatible = "allwinner,sun6i-a31-ahb1-reset";
++ reg = <0x01c202c0 0xc>;
++ };
++
++ apb1_rst: reset@01c202d0 {
++ #reset-cells = <1>;
++ compatible = "allwinner,sun6i-a31-clock-reset";
++ reg = <0x01c202d0 0x4>;
++ };
++
++ apb2_rst: reset@01c202d8 {
++ #reset-cells = <1>;
++ compatible = "allwinner,sun6i-a31-clock-reset";
++ reg = <0x01c202d8 0x4>;
+ };
+
+ timer@01c20c00 {
+@@ -529,7 +571,7 @@
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&bus_gates 112>;
+- resets = <&bus_rst 144>;
++ resets = <&apb2_rst 16>;
+ dmas = <&dma 6>, <&dma 6>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+@@ -542,7 +584,7 @@
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&bus_gates 113>;
+- resets = <&bus_rst 145>;
++ resets = <&apb2_rst 17>;
+ dmas = <&dma 7>, <&dma 7>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+@@ -555,7 +597,7 @@
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&bus_gates 114>;
+- resets = <&bus_rst 146>;
++ resets = <&apb2_rst 18>;
+ dmas = <&dma 8>, <&dma 8>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+@@ -568,7 +610,7 @@
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&bus_gates 115>;
+- resets = <&bus_rst 147>;
++ resets = <&apb2_rst 19>;
+ dmas = <&dma 9>, <&dma 9>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+@@ -591,5 +633,40 @@
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ };
++
++ apb0_reset: reset@01f014b0 {
++ reg = <0x01f014b0 0x4>;
++ compatible = "allwinner,sun6i-a31-clock-reset";
++ #reset-cells = <1>;
++ };
++
++ ir: ir@01f02000 {
++ compatible = "allwinner,sun5i-a13-ir";
++ clocks = <&apb0_gates 1>, <&ir_clk>;
++ clock-names = "apb", "ir";
++ resets = <&apb0_reset 1>;
++ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
++ reg = <0x01f02000 0x40>;
++ status = "disabled";
++ };
++
++ r_pio: pinctrl@01f02c00 {
++ compatible = "allwinner,sun8i-h3-r-pinctrl";
++ reg = <0x01f02c00 0x400>;
++ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&apb0_gates 0>;
++ resets = <&apb0_reset 0>;
++ gpio-controller;
++ #gpio-cells = <3>;
++ interrupt-controller;
++ #interrupt-cells = <3>;
++
++ ir_pins_a: ir@0 {
++ allwinner,pins = "PL11";
++ allwinner,function = "s_cir_rx";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++ };
+ };
+ };
+diff --git a/arch/arm/dts/sun8i-q8-common.dtsi b/arch/arm/dts/sun8i-q8-common.dtsi
+index 07cd268..346a49d 100644
+--- a/arch/arm/dts/sun8i-q8-common.dtsi
++++ b/arch/arm/dts/sun8i-q8-common.dtsi
+@@ -41,11 +41,23 @@
+ */
+ #include "sunxi-q8-common.dtsi"
+
++#include <dt-bindings/pwm/pwm.h>
++
+ / {
+ aliases {
+ serial0 = &r_uart;
+ };
+
++ backlight: backlight {
++ compatible = "pwm-backlight";
++ pinctrl-names = "default";
++ pinctrl-0 = <&bl_en_pin_q8>;
++ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
++ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
++ default-brightness-level = <8>;
++ enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
++ };
++
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+@@ -54,7 +66,7 @@
+ &mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>;
+- vmmc-supply = <&reg_vcc3v0>;
++ vmmc-supply = <&reg_dcdc1>;
+ bus-width = <4>;
+ cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+ cd-inverted;
+@@ -77,8 +89,90 @@
+ };
+ };
+
++&r_rsb {
++ status = "okay";
++
++ axp22x: pmic@3a3 {
++ compatible = "x-powers,axp223";
++ reg = <0x3a3>;
++ interrupt-parent = <&nmi_intc>;
++ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
++ eldoin-supply = <&reg_dcdc1>;
++ };
++};
++
++#include "axp22x.dtsi"
++
++&reg_aldo1 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "vcc-io";
++};
++
++&reg_aldo2 {
++ regulator-always-on;
++ regulator-min-microvolt = <2350000>;
++ regulator-max-microvolt = <2650000>;
++ regulator-name = "vdd-dll";
++};
++
++&reg_aldo3 {
++ regulator-always-on;
++ regulator-min-microvolt = <2700000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-pll-avcc";
++};
++
++&reg_dc1sw {
++ regulator-name = "vcc-lcd";
++};
++
++&reg_dc5ldo {
++ regulator-always-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-cpus";
++};
++
++&reg_dcdc1 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "vcc-3v0";
++};
++
++&reg_dcdc2 {
++ regulator-always-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-sys";
++};
++
++&reg_dcdc3 {
++ regulator-always-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-cpu";
++};
++
++&reg_dcdc5 {
++ regulator-always-on;
++ regulator-min-microvolt = <1500000>;
++ regulator-max-microvolt = <1500000>;
++ regulator-name = "vcc-dram";
++};
++
++&reg_rtc_ldo {
++ regulator-name = "vcc-rtc";
++};
++
+ &r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins_a>;
+ status = "okay";
+ };
++
++&simplefb_lcd {
++ vcc-lcd-supply = <&reg_dc1sw>;
++};
+diff --git a/arch/arm/dts/sun9i-a80-cubieboard4.dts b/arch/arm/dts/sun9i-a80-cubieboard4.dts
+index 6484dcf..eb2ccd0 100644
+--- a/arch/arm/dts/sun9i-a80-cubieboard4.dts
++++ b/arch/arm/dts/sun9i-a80-cubieboard4.dts
+@@ -62,9 +62,31 @@
+ stdout-path = "serial0:115200n8";
+ };
+
++ leds {
++ compatible = "gpio-leds";
++ pinctrl-names = "default";
++ pinctrl-0 = <&led_pins_cubieboard4>;
++
++ green {
++ label = "cubieboard4:green:usr";
++ gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>; /* PH17 */
++ };
++
++ red {
++ label = "cubieboard4:red:usr";
++ gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
++ };
++ };
+ };
+
+ &pio {
++ led_pins_cubieboard4: led-pins@0 {
++ allwinner,pins = "PH6", "PH17";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
+ mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
+ allwinner,pins = "PH18";
+ allwinner,function = "gpio_in";
+@@ -89,6 +111,20 @@
+ vmmc-supply = <&reg_vcc3v0>;
+ bus-width = <8>;
+ non-removable;
++ cap-mmc-hw-reset;
++ status = "okay";
++};
++
++&mmc2_8bit_pins {
++ /* Increase drive strength for DDR modes */
++ allwinner,drive = <SUN4I_PINCTRL_40_MA>;
++};
++
++&r_ir {
++ status = "okay";
++};
++
++&r_rsb {
+ status = "okay";
+ };
+
+diff --git a/arch/arm/dts/sun9i-a80-optimus.dts b/arch/arm/dts/sun9i-a80-optimus.dts
+index 6ce4b5e..d7a20d9 100644
+--- a/arch/arm/dts/sun9i-a80-optimus.dts
++++ b/arch/arm/dts/sun9i-a80-optimus.dts
+@@ -65,7 +65,7 @@
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+- pinctrl-0 = <&led_pins_optimus>;
++ pinctrl-0 = <&led_pins_optimus>, <&led_r_pins_optimus>;
+
+ /* The LED names match those found on the board */
+
+@@ -74,7 +74,10 @@
+ gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
+ };
+
+- /* led3 is on PM15, in R_PIO */
++ led3 {
++ label = "optimus:led3:usr";
++ gpios = <&r_pio 1 15 GPIO_ACTIVE_HIGH>; /* PM15 */
++ };
+
+ led4 {
+ label = "optimus:led4:usr";
+@@ -106,17 +109,6 @@
+ status = "okay";
+ };
+
+-&i2c3 {
+- pinctrl-names = "default";
+- pinctrl-0 = <&i2c3_pins_a>;
+- status = "okay";
+-};
+-
+-&i2c3_pins_a {
+- /* Enable internal pull-up */
+- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+-};
+-
+ &ohci0 {
+ status = "okay";
+ };
+@@ -171,30 +163,42 @@
+ vmmc-supply = <&reg_vcc3v0>;
+ bus-width = <8>;
+ non-removable;
++ cap-mmc-hw-reset;
+ status = "okay";
+ };
+
++&mmc2_8bit_pins {
++ /* Increase drive strength for DDR modes */
++ allwinner,drive = <SUN4I_PINCTRL_40_MA>;
++};
++
+ &reg_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_optimus>;
+ gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ status = "okay";
+ };
+
+-&uart0 {
+- pinctrl-names = "default";
+- pinctrl-0 = <&uart0_pins_a>;
++&r_ir {
+ status = "okay";
+ };
+
+-&uart4 {
+- pinctrl-names = "default";
+- pinctrl-0 = <&uart4_pins_a>;
++&r_pio {
++ led_r_pins_optimus: led-pins@1 {
++ allwinner,pins = "PM15";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++};
++
++&r_rsb {
+ status = "okay";
+ };
+
+-&uart4_pins_a {
+- /* Enable internal pull-up */
+- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++&uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pins_a>;
++ status = "okay";
+ };
+
+ &usbphy1 {
+diff --git a/arch/arm/dts/sun9i-a80.dtsi b/arch/arm/dts/sun9i-a80.dtsi
+index a43ad77..f68b324 100644
+--- a/arch/arm/dts/sun9i-a80.dtsi
++++ b/arch/arm/dts/sun9i-a80.dtsi
+@@ -128,6 +128,17 @@
+ */
+ ranges = <0 0 0 0x20000000>;
+
++ /*
++ * This clock is actually configurable from the PRCM address
++ * space. The external 24M oscillator can be turned off, and
++ * the clock switched to an internal 16M RC oscillator. Under
++ * normal operation there's no reason to do this, and the
++ * default is to use the external good one, so just model this
++ * as a fixed clock. Also it is not entirely clear if the
++ * osc24M mux in the PRCM affects the entire clock tree, which
++ * would also throw all the PLL clock rates off, or just the
++ * downstream clocks in the PRCM.
++ */
+ osc24M: osc24M_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+@@ -135,6 +146,13 @@
+ clock-output-names = "osc24M";
+ };
+
++ /*
++ * The 32k clock is from an external source, normally the
++ * AC100 codec/RTC chip. This clock is by default enabled
++ * and clocked at 32768 Hz, from the oscillator connected
++ * to the AC100. It is configurable, but no such driver or
++ * bindings exist yet.
++ */
+ osc32k: osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+@@ -164,6 +182,14 @@
+ "usb_phy2", "usb_hsic_12M";
+ };
+
++ pll3: clk@06000008 {
++ /* placeholder until implemented */
++ #clock-cells = <0>;
++ compatible = "fixed-clock";
++ clock-rate = <0>;
++ clock-output-names = "pll3";
++ };
++
+ pll4: clk@0600000c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun9i-a80-pll4-clk";
+@@ -277,9 +303,12 @@
+ compatible = "allwinner,sun9i-a80-ahb0-gates-clk";
+ reg = <0x06000580 0x4>;
+ clocks = <&ahb0>;
+- clock-indices = <0>, <1>, <3>, <5>, <8>, <12>, <13>,
+- <14>, <15>, <16>, <18>, <20>, <21>,
+- <22>, <23>;
++ clock-indices = <0>, <1>, <3>,
++ <5>, <8>, <12>,
++ <13>, <14>,
++ <15>, <16>, <18>,
++ <20>, <21>, <22>,
++ <23>;
+ clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu",
+ "ahb0_ss", "ahb0_sd", "ahb0_nand1",
+ "ahb0_nand0", "ahb0_sdram",
+@@ -293,7 +322,10 @@
+ compatible = "allwinner,sun9i-a80-ahb1-gates-clk";
+ reg = <0x06000584 0x4>;
+ clocks = <&ahb1>;
+- clock-indices = <0>, <1>, <17>, <21>, <22>, <23>, <24>;
++ clock-indices = <0>, <1>,
++ <17>, <21>,
++ <22>, <23>,
++ <24>;
+ clock-output-names = "ahb1_usbotg", "ahb1_usbhci",
+ "ahb1_gmac", "ahb1_msgbox",
+ "ahb1_spinlock", "ahb1_hstimer",
+@@ -305,8 +337,9 @@
+ compatible = "allwinner,sun9i-a80-ahb2-gates-clk";
+ reg = <0x06000588 0x4>;
+ clocks = <&ahb2>;
+- clock-indices = <0>, <1>, <2>, <4>, <5>, <7>, <8>,
+- <11>;
++ clock-indices = <0>, <1>,
++ <2>, <4>, <5>,
++ <7>, <8>, <11>;
+ clock-output-names = "ahb2_lcd0", "ahb2_lcd1",
+ "ahb2_edp", "ahb2_csi", "ahb2_hdmi",
+ "ahb2_de", "ahb2_mp", "ahb2_mipi_dsi";
+@@ -317,8 +350,10 @@
+ compatible = "allwinner,sun9i-a80-apb0-gates-clk";
+ reg = <0x06000590 0x4>;
+ clocks = <&apb0>;
+- clock-indices = <1>, <5>, <11>, <12>, <13>, <15>,
+- <17>, <18>, <19>;
++ clock-indices = <1>, <5>,
++ <11>, <12>, <13>,
++ <15>, <17>, <18>,
++ <19>;
+ clock-output-names = "apb0_spdif", "apb0_pio",
+ "apb0_ac97", "apb0_i2s0", "apb0_i2s1",
+ "apb0_lradc", "apb0_gpadc", "apb0_twd",
+@@ -330,14 +365,79 @@
+ compatible = "allwinner,sun9i-a80-apb1-gates-clk";
+ reg = <0x06000594 0x4>;
+ clocks = <&apb1>;
+- clock-indices = <0>, <1>, <2>, <3>, <4>,
+- <16>, <17>, <18>, <19>, <20>, <21>;
++ clock-indices = <0>, <1>,
++ <2>, <3>, <4>,
++ <16>, <17>,
++ <18>, <19>,
++ <20>, <21>;
+ clock-output-names = "apb1_i2c0", "apb1_i2c1",
+ "apb1_i2c2", "apb1_i2c3", "apb1_i2c4",
+ "apb1_uart0", "apb1_uart1",
+ "apb1_uart2", "apb1_uart3",
+ "apb1_uart4", "apb1_uart5";
+ };
++
++ cpus_clk: clk@08001410 {
++ compatible = "allwinner,sun9i-a80-cpus-clk";
++ reg = <0x08001410 0x4>;
++ #clock-cells = <0>;
++ clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>;
++ clock-output-names = "cpus";
++ };
++
++ ahbs: ahbs_clk {
++ compatible = "fixed-factor-clock";
++ #clock-cells = <0>;
++ clock-div = <1>;
++ clock-mult = <1>;
++ clocks = <&cpus_clk>;
++ clock-output-names = "ahbs";
++ };
++
++ apbs: clk@0800141c {
++ compatible = "allwinner,sun8i-a23-apb0-clk";
++ reg = <0x0800141c 0x4>;
++ #clock-cells = <0>;
++ clocks = <&ahbs>;
++ clock-output-names = "apbs";
++ };
++
++ apbs_gates: clk@08001428 {
++ compatible = "allwinner,sun9i-a80-apbs-gates-clk";
++ reg = <0x08001428 0x4>;
++ #clock-cells = <1>;
++ clocks = <&apbs>;
++ clock-indices = <0>, <1>,
++ <2>, <3>,
++ <4>, <5>,
++ <6>, <7>,
++ <12>, <13>,
++ <16>, <17>,
++ <18>, <20>;
++ clock-output-names = "apbs_pio", "apbs_ir",
++ "apbs_timer", "apbs_rsb",
++ "apbs_uart", "apbs_1wire",
++ "apbs_i2c0", "apbs_i2c1",
++ "apbs_ps2_0", "apbs_ps2_1",
++ "apbs_dma", "apbs_i2s0",
++ "apbs_i2s1", "apbs_twd";
++ };
++
++ r_1wire_clk: clk@08001450 {
++ reg = <0x08001450 0x4>;
++ #clock-cells = <0>;
++ compatible = "allwinner,sun4i-a10-mod0-clk";
++ clocks = <&osc32k>, <&osc24M>;
++ clock-output-names = "r_1wire";
++ };
++
++ r_ir_clk: clk@08001454 {
++ reg = <0x08001454 0x4>;
++ #clock-cells = <0>;
++ compatible = "allwinner,sun4i-a10-mod0-clk";
++ clocks = <&osc32k>, <&osc24M>;
++ clock-output-names = "r_ir";
++ };
+ };
+
+ soc {
+@@ -443,7 +543,7 @@
+ };
+
+ mmc0: mmc@01c0f000 {
+- compatible = "allwinner,sun5i-a13-mmc";
++ compatible = "allwinner,sun9i-a80-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>,
+ <&mmc0_clk 1>, <&mmc0_clk 2>;
+@@ -457,7 +557,7 @@
+ };
+
+ mmc1: mmc@01c10000 {
+- compatible = "allwinner,sun5i-a13-mmc";
++ compatible = "allwinner,sun9i-a80-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>,
+ <&mmc1_clk 1>, <&mmc1_clk 2>;
+@@ -471,7 +571,7 @@
+ };
+
+ mmc2: mmc@01c11000 {
+- compatible = "allwinner,sun5i-a13-mmc";
++ compatible = "allwinner,sun9i-a80-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>,
+ <&mmc2_clk 1>, <&mmc2_clk 2>;
+@@ -485,7 +585,7 @@
+ };
+
+ mmc3: mmc@01c12000 {
+- compatible = "allwinner,sun5i-a13-mmc";
++ compatible = "allwinner,sun9i-a80-mmc";
+ reg = <0x01c12000 0x1000>;
+ clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>,
+ <&mmc3_clk 1>, <&mmc3_clk 2>;
+@@ -582,7 +682,7 @@
+ clocks = <&apb0_gates 5>;
+ gpio-controller;
+ interrupt-controller;
+- #interrupt-cells = <2>;
++ #interrupt-cells = <3>;
+ #size-cells = <0>;
+ #gpio-cells = <3>;
+
+@@ -604,7 +704,8 @@
+ mmc2_8bit_pins: mmc2_8bit {
+ allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+ "PC10", "PC11", "PC12",
+- "PC13", "PC14", "PC15";
++ "PC13", "PC14", "PC15",
++ "PC16";
+ allwinner,function = "mmc2";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+@@ -752,14 +853,83 @@
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
++ apbs_rst: reset@080014b0 {
++ reg = <0x080014b0 0x4>;
++ compatible = "allwinner,sun6i-a31-clock-reset";
++ #reset-cells = <1>;
++ };
++
++ nmi_intc: interrupt-controller@080015a0 {
++ compatible = "allwinner,sun9i-a80-nmi";
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ reg = <0x080015a0 0xc>;
++ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
++ };
++
++ r_ir: ir@08002000 {
++ compatible = "allwinner,sun5i-a13-ir";
++ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&r_ir_pins>;
++ clocks = <&apbs_gates 1>, <&r_ir_clk>;
++ clock-names = "apb", "ir";
++ resets = <&apbs_rst 1>;
++ reg = <0x08002000 0x40>;
++ status = "disabled";
++ };
++
+ r_uart: serial@08002800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x08002800 0x400>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+- clocks = <&osc24M>;
++ clocks = <&apbs_gates 4>;
++ resets = <&apbs_rst 4>;
+ status = "disabled";
+ };
++
++ r_pio: pinctrl@08002c00 {
++ compatible = "allwinner,sun9i-a80-r-pinctrl";
++ reg = <0x08002c00 0x400>;
++ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&apbs_gates 0>;
++ resets = <&apbs_rst 0>;
++ gpio-controller;
++ interrupt-controller;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ #gpio-cells = <3>;
++
++ r_ir_pins: r_ir {
++ allwinner,pins = "PL6";
++ allwinner,function = "s_cir_rx";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
++ r_rsb_pins: r_rsb {
++ allwinner,pins = "PN0", "PN1";
++ allwinner,function = "s_rsb";
++ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
++ };
++
++ r_rsb: i2c@08003400 {
++ compatible = "allwinner,sun8i-a23-rsb";
++ reg = <0x08003400 0x400>;
++ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&apbs_gates 3>;
++ clock-frequency = <3000000>;
++ resets = <&apbs_rst 3>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&r_rsb_pins>;
++ status = "disabled";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
+ };
+ };
+diff --git a/arch/arm/dts/sunxi-itead-core-common.dtsi b/arch/arm/dts/sunxi-itead-core-common.dtsi
+new file mode 100644
+index 0000000..2565d51
+--- /dev/null
++++ b/arch/arm/dts/sunxi-itead-core-common.dtsi
+@@ -0,0 +1,136 @@
++/*
++ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++#include "sunxi-common-regulators.dtsi"
++
++/ {
++ aliases {
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++};
++
++&cpu0 {
++ cpu-supply = <&reg_dcdc2>;
++};
++
++&ehci0 {
++ status = "okay";
++};
++
++&ehci1 {
++ status = "okay";
++};
++
++&i2c0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c0_pins_a>;
++ status = "okay";
++
++ axp209: pmic@34 {
++ reg = <0x34>;
++ };
++};
++
++&i2c1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c1_pins_a>;
++ status = "okay";
++};
++
++&ohci0 {
++ status = "okay";
++};
++
++&ohci1 {
++ status = "okay";
++};
++
++#include "axp209.dtsi"
++
++&reg_dcdc2 {
++ regulator-always-on;
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-cpu";
++};
++
++&reg_dcdc3 {
++ regulator-always-on;
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-int-dll";
++};
++
++&reg_ldo1 {
++ regulator-name = "vdd-rtc";
++};
++
++&reg_ldo2 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "avcc";
++};
++
++&reg_usb1_vbus {
++ status = "okay";
++};
++
++&reg_usb2_vbus {
++ status = "okay";
++};
++
++&uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pins_a>;
++ status = "okay";
++};
++
++&usbphy {
++ usb1_vbus-supply = <&reg_usb1_vbus>;
++ usb2_vbus-supply = <&reg_usb2_vbus>;
++ status = "okay";
++};
+diff --git a/arch/arm/dts/sunxi-q8-common.dtsi b/arch/arm/dts/sunxi-q8-common.dtsi
+index 17b26ff..b824146 100644
+--- a/arch/arm/dts/sunxi-q8-common.dtsi
++++ b/arch/arm/dts/sunxi-q8-common.dtsi
+@@ -75,3 +75,9 @@
+ voltage = <400000>;
+ };
+ };
++
++&pwm {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pwm0_pins>;
++ status = "okay";
++};
diff --git a/package/boot/uboot-sunxi/patches/011-sunxi-support-h3-ccu.patch b/package/boot/uboot-sunxi/patches/011-sunxi-support-h3-ccu.patch
deleted file mode 100644
index 495b3a9..0000000
--- a/package/boot/uboot-sunxi/patches/011-sunxi-support-h3-ccu.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-diff --git a/arch/arm/cpu/armv7/sunxi/clock.c b/arch/arm/cpu/armv7/sunxi/clock.c
-index 47fb70f..5cc5d25 100644
---- a/arch/arm/cpu/armv7/sunxi/clock.c
-+++ b/arch/arm/cpu/armv7/sunxi/clock.c
-@@ -14,12 +14,17 @@
- #include <asm/arch/gpio.h>
- #include <asm/arch/sys_proto.h>
-
-+__weak void clock_init_sec(void)
-+{
-+}
-+
- int clock_init(void)
- {
- #ifdef CONFIG_SPL_BUILD
- clock_init_safe();
- #endif
- clock_init_uart();
-+ clock_init_sec();
-
- return 0;
- }
-diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
-index 4501884..d0085e8 100644
---- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
-+++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
-@@ -45,6 +45,19 @@ void clock_init_safe(void)
- }
- #endif
-
-+void clock_init_sec(void)
-+{
-+ struct sunxi_ccm_reg * const ccm =
-+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-+
-+#ifdef CONFIG_MACH_SUN8I_H3
-+ setbits_le32(&ccm->ccu_sec_switch,
-+ CCM_SEC_SWITCH_MBUS_NONSEC |
-+ CCM_SEC_SWITCH_BUS_NONSEC |
-+ CCM_SEC_SWITCH_PLL_NONSEC);
-+#endif
-+}
-+
- void clock_init_uart(void)
- {
- #if CONFIG_CONS_INDEX < 5
-diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h
-index 8ca58ae..6c0573f 100644
---- a/arch/arm/include/asm/arch-sunxi/clock.h
-+++ b/arch/arm/include/asm/arch-sunxi/clock.h
-@@ -30,6 +30,7 @@ int clock_init(void);
- int clock_twi_onoff(int port, int state);
- void clock_set_de_mod_clock(u32 *clk_cfg, unsigned int hz);
- void clock_init_safe(void);
-+void clock_init_sec(void);
- void clock_init_uart(void);
- #endif
-
-diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
-index 5c76275..554d858 100644
---- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
-+++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
-@@ -137,6 +137,8 @@ struct sunxi_ccm_reg {
- u32 apb1_reset_cfg; /* 0x2d0 APB1 Reset config */
- u32 reserved24;
- u32 apb2_reset_cfg; /* 0x2d8 APB2 Reset config */
-+ u32 reserved25[5];
-+ u32 ccu_sec_switch; /* 0x2f0 CCU Security Switch, H3 only */
- };
-
- /* apb2 bit field */
-@@ -375,6 +377,11 @@ struct sunxi_ccm_reg {
- #define CCM_DE_CTRL_PLL10 (5 << 24)
- #define CCM_DE_CTRL_GATE (1 << 31)
-
-+/* CCU security switch, H3 only */
-+#define CCM_SEC_SWITCH_MBUS_NONSEC (1 << 2)
-+#define CCM_SEC_SWITCH_BUS_NONSEC (1 << 1)
-+#define CCM_SEC_SWITCH_PLL_NONSEC (1 << 0)
-+
- #ifndef __ASSEMBLY__
- void clock_set_pll1(unsigned int hz);
- void clock_set_pll3(unsigned int hz);
diff --git a/package/boot/uboot-sunxi/patches/012-sun6i-fix-clock_twi_onoff.patch b/package/boot/uboot-sunxi/patches/012-sun6i-fix-clock_twi_onoff.patch
new file mode 100644
index 0000000..9471b39
--- /dev/null
+++ b/package/boot/uboot-sunxi/patches/012-sun6i-fix-clock_twi_onoff.patch
@@ -0,0 +1,40 @@
+From 730d2f3a41c5ccae71b5008fffdf697d143be68c Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Wed, 16 Mar 2016 20:44:51 +0100
+Subject: [PATCH] sunxi: Fix clock_twi_onoff for sun6i
+
+The clock_sun6i.c implementation was not deasserting the reset for
+the regular i2c controllers, this commit fixes this.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+Acked-by: Ian Campbell <ijc@hellion.org.uk>
+---
+ arch/arm/cpu/armv7/sunxi/clock_sun6i.c | 11 ++++++++---
+ 1 file changed, 8 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
+index 700b605..4e1e1a4 100644
+--- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
++++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
+@@ -100,13 +100,18 @@ int clock_twi_onoff(int port, int state)
+ return 0;
+ }
+
+- /* set the apb clock gate for twi */
+- if (state)
++ /* set the apb clock gate and reset for twi */
++ if (state) {
+ setbits_le32(&ccm->apb2_gate,
+ CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port));
+- else
++ setbits_le32(&ccm->apb2_reset_cfg,
++ 1 << (APB2_RESET_TWI_SHIFT + port));
++ } else {
++ clrbits_le32(&ccm->apb2_reset_cfg,
++ 1 << (APB2_RESET_TWI_SHIFT + port));
+ clrbits_le32(&ccm->apb2_gate,
+ CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port));
++ }
+
+ return 0;
+ }
diff --git a/package/boot/uboot-sunxi/patches/012-sunxi-support-psci-on-h3.patch b/package/boot/uboot-sunxi/patches/012-sunxi-support-psci-on-h3.patch
deleted file mode 100644
index 78d784f..0000000
--- a/package/boot/uboot-sunxi/patches/012-sunxi-support-psci-on-h3.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-diff --git a/arch/arm/cpu/armv7/sunxi/psci_sun6i.S b/arch/arm/cpu/armv7/sunxi/psci_sun6i.S
-index 4ff46e4..90b5bfd 100644
---- a/arch/arm/cpu/armv7/sunxi/psci_sun6i.S
-+++ b/arch/arm/cpu/armv7/sunxi/psci_sun6i.S
-@@ -106,7 +106,7 @@ psci_fiq_enter:
- str r10, [r8, #0x100]
- timer_wait r10, ONE_MS
-
--#ifdef CONFIG_MACH_SUN6I
-+#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I_H3)
- @ Activate power clamp
- lsl r12, r9, #2 @ x4
- add r12, r12, r8
-@@ -170,7 +170,7 @@ psci_cpu_on:
- movw r0, #(SUNXI_PRCM_BASE & 0xffff)
- movt r0, #(SUNXI_PRCM_BASE >> 16)
-
--#ifdef CONFIG_MACH_SUN6I
-+#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I_H3)
- @ Release power clamp
- lsl r5, r1, #2 @ 1 register per CPU
- add r5, r5, r0 @ PRCM
diff --git a/package/boot/uboot-sunxi/patches/013-enable-realtek-phy.patch b/package/boot/uboot-sunxi/patches/013-enable-realtek-phy.patch
new file mode 100644
index 0000000..521750c
--- /dev/null
+++ b/package/boot/uboot-sunxi/patches/013-enable-realtek-phy.patch
@@ -0,0 +1,26 @@
+From 1eae8f66ff749409eb96e2f3f3387c56232d0b8a Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Wed, 16 Mar 2016 13:46:22 +0100
+Subject: [PATCH] sunxi: Enable realtek phy support
+
+Enable building of drivers/net/phy/realtek.c so that realtek phys
+get properly initialized.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+Acked-by: Ian Campbell <ijc@hellion.org.uk>
+---
+ include/configs/sunxi-common.h | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
+index b26363d..ea15e37 100644
+--- a/include/configs/sunxi-common.h
++++ b/include/configs/sunxi-common.h
+@@ -310,6 +310,7 @@ extern int soft_i2c_gpio_scl;
+ #define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY */
+ #define CONFIG_PHY_ADDR 1
+ #define CONFIG_MII /* MII PHY management */
++#define CONFIG_PHY_REALTEK
+ #endif
+
+ #ifdef CONFIG_USB_EHCI_HCD
diff --git a/package/boot/uboot-sunxi/patches/013-sunxi-enable-booting-nonsec_HYP-on-h3.patch b/package/boot/uboot-sunxi/patches/013-sunxi-enable-booting-nonsec_HYP-on-h3.patch
deleted file mode 100644
index dfde4e8..0000000
--- a/package/boot/uboot-sunxi/patches/013-sunxi-enable-booting-nonsec_HYP-on-h3.patch
+++ /dev/null
@@ -1,16 +0,0 @@
-diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
-index 9d67847..28e6bb4 100644
---- a/board/sunxi/Kconfig
-+++ b/board/sunxi/Kconfig
-@@ -71,8 +71,11 @@ config MACH_SUN8I_A33
- config MACH_SUN8I_H3
- bool "sun8i (Allwinner H3)"
- select CPU_V7
-+ select CPU_V7_HAS_NONSEC
-+ select CPU_V7_HAS_VIRT
- select SUNXI_GEN_SUN6I
- select SUPPORT_SPL
-+ select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
-
- config MACH_SUN8I_A83T
- bool "sun8i (Allwinner A83T)"
diff --git a/package/boot/uboot-sunxi/patches/014-fix-gmac-init.patch b/package/boot/uboot-sunxi/patches/014-fix-gmac-init.patch
new file mode 100644
index 0000000..a4e4386
--- /dev/null
+++ b/package/boot/uboot-sunxi/patches/014-fix-gmac-init.patch
@@ -0,0 +1,135 @@
+From fc8991c61c393ce6a9d3dfc97cb56dbbd9e8cbba Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Thu, 17 Mar 2016 13:53:03 +0100
+Subject: [PATCH] sunxi: Fix gmac not working due to cpu_eth_init no longer
+ being called
+
+cpu_eth_init is no longer called for dm enabled eth drivers, this
+was causing the sunxi gmac eth controller to no longer work in u-boot.
+
+This commit fixes this by calling the clock, reset and pinmux setup
+function from s_init() and enabling the phy power pin (if any) from
+board_init().
+
+The enabling of phy power cannot be done from s_init because it uses dm
+and dm is not ready yet at this point.
+
+Note that the mdelay is dropped as the phy gets enabled much earlier
+now, so it is no longer needed.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+Acked-by: Ian Campbell <ijc@hellion.org.uk>
+Tested-by: Karsten Merker <merker@debian.org>
+Tested-by: Michael Haas <haas@computerlinguist.org>
+---
+ arch/arm/cpu/armv7/sunxi/board.c | 28 +---------------------------
+ arch/arm/include/asm/arch-sunxi/sys_proto.h | 6 +++++-
+ board/sunxi/board.c | 5 +++++
+ board/sunxi/gmac.c | 14 +-------------
+ 4 files changed, 12 insertions(+), 41 deletions(-)
+
+diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
+index e80785b..7653148 100644
+--- a/arch/arm/cpu/armv7/sunxi/board.c
++++ b/arch/arm/cpu/armv7/sunxi/board.c
+@@ -152,6 +152,7 @@ void s_init(void)
+ timer_init();
+ gpio_init();
+ i2c_init_board();
++ eth_init_board();
+ }
+
+ #ifdef CONFIG_SPL_BUILD
+@@ -259,30 +260,3 @@ void enable_caches(void)
+ dcache_enable();
+ }
+ #endif
+-
+-#ifdef CONFIG_CMD_NET
+-/*
+- * Initializes on-chip ethernet controllers.
+- * to override, implement board_eth_init()
+- */
+-int cpu_eth_init(bd_t *bis)
+-{
+- __maybe_unused int rc;
+-
+-#ifdef CONFIG_MACPWR
+- gpio_request(CONFIG_MACPWR, "macpwr");
+- gpio_direction_output(CONFIG_MACPWR, 1);
+- mdelay(200);
+-#endif
+-
+-#ifdef CONFIG_SUNXI_GMAC
+- rc = sunxi_gmac_initialize(bis);
+- if (rc < 0) {
+- printf("sunxi: failed to initialize gmac\n");
+- return rc;
+- }
+-#endif
+-
+- return 0;
+-}
+-#endif
+diff --git a/arch/arm/include/asm/arch-sunxi/sys_proto.h b/arch/arm/include/asm/arch-sunxi/sys_proto.h
+index 9df3744..a373319 100644
+--- a/arch/arm/include/asm/arch-sunxi/sys_proto.h
++++ b/arch/arm/include/asm/arch-sunxi/sys_proto.h
+@@ -24,6 +24,10 @@ void sdelay(unsigned long);
+ void return_to_fel(uint32_t lr, uint32_t sp);
+
+ /* Board / SoC level designware gmac init */
+-int sunxi_gmac_initialize(bd_t *bis);
++#if !defined CONFIG_SPL_BUILD && defined CONFIG_SUNXI_GMAC
++void eth_init_board(void);
++#else
++static inline void eth_init_board(void) {}
++#endif
+
+ #endif
+diff --git a/board/sunxi/board.c b/board/sunxi/board.c
+index 80eae9c..e16718f 100644
+--- a/board/sunxi/board.c
++++ b/board/sunxi/board.c
+@@ -90,6 +90,11 @@ int board_init(void)
+ if (ret)
+ return ret;
+
++#ifdef CONFIG_MACPWR
++ gpio_request(CONFIG_MACPWR, "macpwr");
++ gpio_direction_output(CONFIG_MACPWR, 1);
++#endif
++
+ /* Uses dm gpio code so do this here and not in i2c_init_board() */
+ return soft_i2c_board_init();
+ }
+diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c
+index 4e222d8..69eb8ff 100644
+--- a/board/sunxi/gmac.c
++++ b/board/sunxi/gmac.c
+@@ -6,7 +6,7 @@
+ #include <asm/arch/clock.h>
+ #include <asm/arch/gpio.h>
+
+-int sunxi_gmac_initialize(bd_t *bis)
++void eth_init_board(void)
+ {
+ int pin;
+ struct sunxi_ccm_reg *const ccm =
+@@ -79,16 +79,4 @@ int sunxi_gmac_initialize(bd_t *bis)
+ for (pin = SUNXI_GPA(26); pin <= SUNXI_GPA(27); pin++)
+ sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
+ #endif
+-
+-#ifdef CONFIG_DM_ETH
+- return 0;
+-#else
+-# ifdef CONFIG_RGMII
+- return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_RGMII);
+-# elif defined CONFIG_GMII
+- return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_GMII);
+-# else
+- return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_MII);
+-# endif
+-#endif
+ }
diff --git a/package/boot/uboot-sunxi/patches/015-fix-2nd-usb-ctrler-on-sun47i.patch b/package/boot/uboot-sunxi/patches/015-fix-2nd-usb-ctrler-on-sun47i.patch
new file mode 100644
index 0000000..2d49194
--- /dev/null
+++ b/package/boot/uboot-sunxi/patches/015-fix-2nd-usb-ctrler-on-sun47i.patch
@@ -0,0 +1,82 @@
+From 948603d4d637a0e04a3214253b911cfc4ed11220 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Mon, 21 Mar 2016 14:44:35 +0100
+Subject: [PATCH] sunxi: Fix 2nd usb controller on sun4i/sun7i no longer
+ working
+
+The 2nd usb controller on sun4i/sun7i has its base address 0x8000
+bytes from the 1st one, rather then 0x1000. Also the ahb clk gates
+are interleaved with the ohci clk-gates introducing a hole between
+the clks for usb1 and usb2.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+Acked-by: Ian Campbell <ijc@hellion.org.uk>
+---
+ drivers/usb/host/ehci-sunxi.c | 13 +++++++++++--
+ drivers/usb/host/ohci-sunxi.c | 15 ++++++++++++---
+ 2 files changed, 23 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c
+index cf3dcc4..677a5d3 100644
+--- a/drivers/usb/host/ehci-sunxi.c
++++ b/drivers/usb/host/ehci-sunxi.c
+@@ -17,6 +17,14 @@
+ #include <dm.h>
+ #include "ehci.h"
+
++#ifdef CONFIG_SUNXI_GEN_SUN4I
++#define BASE_DIST 0x8000
++#define AHB_CLK_DIST 2
++#else
++#define BASE_DIST 0x1000
++#define AHB_CLK_DIST 1
++#endif
++
+ struct ehci_sunxi_priv {
+ struct ehci_ctrl ehci;
+ int ahb_gate_mask; /* Mask of ahb_gate0 clk gate bits for this hcd */
+@@ -39,8 +47,9 @@ static int ehci_usb_probe(struct udevice *dev)
+ #ifdef CONFIG_MACH_SUN8I_H3
+ priv->ahb_gate_mask |= 1 << AHB_GATE_OFFSET_USB_OHCI0;
+ #endif
+- priv->phy_index = ((u32)hccr - SUNXI_USB1_BASE) / 0x1000 + 1;
+- priv->ahb_gate_mask <<= priv->phy_index - 1;
++ priv->phy_index = ((u32)hccr - SUNXI_USB1_BASE) / BASE_DIST;
++ priv->ahb_gate_mask <<= priv->phy_index * AHB_CLK_DIST;
++ priv->phy_index++; /* Non otg phys start at 1 */
+
+ setbits_le32(&ccm->ahb_gate0, priv->ahb_gate_mask);
+ #ifdef CONFIG_SUNXI_GEN_SUN6I
+diff --git a/drivers/usb/host/ohci-sunxi.c b/drivers/usb/host/ohci-sunxi.c
+index 1b1f651..d4fb95a 100644
+--- a/drivers/usb/host/ohci-sunxi.c
++++ b/drivers/usb/host/ohci-sunxi.c
+@@ -17,6 +17,14 @@
+ #include <usb.h>
+ #include "ohci.h"
+
++#ifdef CONFIG_SUNXI_GEN_SUN4I
++#define BASE_DIST 0x8000
++#define AHB_CLK_DIST 2
++#else
++#define BASE_DIST 0x1000
++#define AHB_CLK_DIST 1
++#endif
++
+ struct ohci_sunxi_priv {
+ ohci_t ohci;
+ int ahb_gate_mask; /* Mask of ahb_gate0 clk gate bits for this hcd */
+@@ -42,9 +50,10 @@ static int ohci_usb_probe(struct udevice *dev)
+ priv->ahb_gate_mask |= 1 << AHB_GATE_OFFSET_USB_EHCI0;
+ #endif
+ priv->usb_gate_mask = CCM_USB_CTRL_OHCI0_CLK;
+- priv->phy_index = ((u32)regs - (SUNXI_USB1_BASE + 0x400)) / 0x1000 + 1;
+- priv->ahb_gate_mask <<= priv->phy_index - 1;
+- priv->usb_gate_mask <<= priv->phy_index - 1;
++ priv->phy_index = ((u32)regs - (SUNXI_USB1_BASE + 0x400)) / BASE_DIST;
++ priv->ahb_gate_mask <<= priv->phy_index * AHB_CLK_DIST;
++ priv->usb_gate_mask <<= priv->phy_index;
++ priv->phy_index++; /* Non otg phys start at 1 */
+
+ setbits_le32(&ccm->ahb_gate0, priv->ahb_gate_mask);
+ setbits_le32(&ccm->usb_clk_cfg, priv->usb_gate_mask);
diff --git a/package/boot/uboot-sunxi/patches/016-spl-print-mmc-slot.patch b/package/boot/uboot-sunxi/patches/016-spl-print-mmc-slot.patch
new file mode 100644
index 0000000..65b1fd1
--- /dev/null
+++ b/package/boot/uboot-sunxi/patches/016-spl-print-mmc-slot.patch
@@ -0,0 +1,33 @@
+From 8f10b5c65611e6c15a113bf63289b6696452f90d Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Sun, 20 Mar 2016 14:17:10 +0100
+Subject: [PATCH] spl: Print from which mmc slot spl is trying to boot
+
+On some sunxi boards (and presumably also non sunxi boards) u-boot can
+be either loaded from a sdcard in a micro-sd slot, or from eMMC.
+
+Print which MMC spl tries to boot from, to help debugging.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+Reviewed-by: Tom Rini <trini@konsulko.com>
+---
+ common/spl/spl.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/common/spl/spl.c b/common/spl/spl.c
+index e5167bf..82e7f58 100644
+--- a/common/spl/spl.c
++++ b/common/spl/spl.c
+@@ -210,9 +210,9 @@ struct boot_device_name boot_name_table[] = {
+ { BOOT_DEVICE_RAM, "RAM" },
+ #endif
+ #ifdef CONFIG_SPL_MMC_SUPPORT
+- { BOOT_DEVICE_MMC1, "MMC" },
+- { BOOT_DEVICE_MMC2, "MMC" },
+- { BOOT_DEVICE_MMC2_2, "MMC" },
++ { BOOT_DEVICE_MMC1, "MMC1" },
++ { BOOT_DEVICE_MMC2, "MMC2" },
++ { BOOT_DEVICE_MMC2_2, "MMC2_2" },
+ #endif
+ #ifdef CONFIG_SPL_NAND_SUPPORT
+ { BOOT_DEVICE_NAND, "NAND" },
diff --git a/package/boot/uboot-sunxi/patches/017-usb-add-support-for-usb3-vbus-pin.patch b/package/boot/uboot-sunxi/patches/017-usb-add-support-for-usb3-vbus-pin.patch
new file mode 100644
index 0000000..8c67063
--- /dev/null
+++ b/package/boot/uboot-sunxi/patches/017-usb-add-support-for-usb3-vbus-pin.patch
@@ -0,0 +1,43 @@
+From 60fa63012fcdc3c4ec1497bf5e358f0a90b40949 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Fri, 18 Mar 2016 08:42:01 +0100
+Subject: [PATCH] sunxi: Add support for USB vbus pin for USB3
+
+The H3 has USB0 - USB3, add support for having a USB vbus pin for USB3.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+Acked-by: Ian Campbell <ijc@hellion.org.uk>
+---
+ arch/arm/cpu/armv7/sunxi/usb_phy.c | 1 +
+ board/sunxi/Kconfig | 6 ++++++
+ 2 files changed, 7 insertions(+)
+
+diff --git a/arch/arm/cpu/armv7/sunxi/usb_phy.c b/arch/arm/cpu/armv7/sunxi/usb_phy.c
+index 6ac96cc..0749fbd 100644
+--- a/arch/arm/cpu/armv7/sunxi/usb_phy.c
++++ b/arch/arm/cpu/armv7/sunxi/usb_phy.c
+@@ -76,6 +76,7 @@ static int get_vbus_gpio(int index)
+ case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_PIN);
+ case 1: return sunxi_name_to_gpio(CONFIG_USB1_VBUS_PIN);
+ case 2: return sunxi_name_to_gpio(CONFIG_USB2_VBUS_PIN);
++ case 3: return sunxi_name_to_gpio(CONFIG_USB3_VBUS_PIN);
+ }
+ return -EINVAL;
+ }
+diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
+index 5e9d3af..5e72fac 100644
+--- a/board/sunxi/Kconfig
++++ b/board/sunxi/Kconfig
+@@ -342,6 +342,12 @@ config USB2_VBUS_PIN
+ ---help---
+ See USB1_VBUS_PIN help text.
+
++config USB3_VBUS_PIN
++ string "Vbus enable pin for usb3 (ehci2)"
++ default ""
++ ---help---
++ See USB1_VBUS_PIN help text.
++
+ config I2C0_ENABLE
+ bool "Enable I2C/TWI controller 0"
+ default y if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
diff --git a/package/boot/uboot-sunxi/patches/018-usb-specify-vbus-pins-on-orangepis.patch b/package/boot/uboot-sunxi/patches/018-usb-specify-vbus-pins-on-orangepis.patch
new file mode 100644
index 0000000..4d2a583
--- /dev/null
+++ b/package/boot/uboot-sunxi/patches/018-usb-specify-vbus-pins-on-orangepis.patch
@@ -0,0 +1,35 @@
+From ce0d0926758f631fdd655d438acd32d5935d43a4 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Fri, 18 Mar 2016 08:45:21 +0100
+Subject: [PATCH] sunxi: Specify USB vbus pins for orangepi boards
+
+This fixes the USB ports not working on the orangepi_plus and stops us
+from messing with gpio-s which we should not touch on the orangepi_pc.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+Acked-by: Ian Campbell <ijc@hellion.org.uk>
+---
+ configs/orangepi_pc_defconfig | 3 +++
+ configs/orangepi_plus_defconfig | 1 +
+ 2 files changed, 4 insertions(+)
+
+diff --git a/configs/orangepi_pc_defconfig b/configs/orangepi_pc_defconfig
+index aaf0f68..4e9051d 100644
+--- a/configs/orangepi_pc_defconfig
++++ b/configs/orangepi_pc_defconfig
+@@ -14,3 +14,6 @@ CONFIG_SPL=y
+ CONFIG_CMD_GPIO=y
+ CONFIG_SY8106A_POWER=y
+ CONFIG_USB_EHCI_HCD=y
++CONFIG_USB1_VBUS_PIN=""
++CONFIG_USB2_VBUS_PIN=""
++CONFIG_USB3_VBUS_PIN=""
+diff --git a/configs/orangepi_plus_defconfig b/configs/orangepi_plus_defconfig
+index e52dcfc..6ecb30e 100644
+--- a/configs/orangepi_plus_defconfig
++++ b/configs/orangepi_plus_defconfig
+@@ -14,3 +14,4 @@ CONFIG_SPL=y
+ CONFIG_CMD_GPIO=y
+ CONFIG_SY8106A_POWER=y
+ CONFIG_USB_EHCI_HCD=y
++CONFIG_USB1_VBUS_PIN="PG13"
diff --git a/package/boot/uboot-sunxi/patches/019-sid-add-efuse-support-for-h3-a83t.patch b/package/boot/uboot-sunxi/patches/019-sid-add-efuse-support-for-h3-a83t.patch
new file mode 100644
index 0000000..6ceccbd
--- /dev/null
+++ b/package/boot/uboot-sunxi/patches/019-sid-add-efuse-support-for-h3-a83t.patch
@@ -0,0 +1,35 @@
+From 70fe24ed93fa90eb407d18a5fc9d9ad85ac9184c Mon Sep 17 00:00:00 2001
+From: Chen-Yu Tsai <wens@csie.org>
+Date: Wed, 27 Jan 2016 16:34:43 +0800
+Subject: [PATCH] sunxi: Support SID e-fuses on A83T and H3
+
+On the A83T and H3, the SID block is at a different address.
+Furthurmore, the e-fuses are at an offset of 0x200 within the
+hardware's address space.
+
+Signed-off-by: Chen-Yu Tsai <wens@csie.org>
+Acked-by: Hans de Goede <hdegoede@redhat.com>
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
+index b6e11eb..65c0441 100644
+--- a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
++++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
+@@ -82,7 +82,14 @@
+ #define SUNXI_AD_DA_BASE 0x01c22c00
+ #define SUNXI_KEYPAD_BASE 0x01c23000
+ #define SUNXI_TZPC_BASE 0x01c23400
++
++#if defined(CONFIG_MACH_SUN8I_A83T) || defined(CONFIG_MACH_SUN8I_H3)
++/* SID address space starts at 0x01c1400, but e-fuse is at offset 0x200 */
++#define SUNXI_SID_BASE 0x01c14200
++#else
+ #define SUNXI_SID_BASE 0x01c23800
++#endif
++
+ #define SUNXI_SJTAG_BASE 0x01c23c00
+
+ #define SUNXI_TP_BASE 0x01c25000
diff --git a/package/boot/uboot-sunxi/patches/020-boot-display-board-model-on-startup.patch b/package/boot/uboot-sunxi/patches/020-boot-display-board-model-on-startup.patch
new file mode 100644
index 0000000..64dff48
--- /dev/null
+++ b/package/boot/uboot-sunxi/patches/020-boot-display-board-model-on-startup.patch
@@ -0,0 +1,25 @@
+From 2af25b747340c6c8f6a6b9e27632db577bf4da52 Mon Sep 17 00:00:00 2001
+From: Simon Glass <sjg@chromium.org>
+Date: Mon, 22 Feb 2016 22:55:46 -0700
+Subject: [PATCH] sunxi: Display the board model on start-up
+
+It is useful to know which sunxi board you are booting. Display this on
+start-up to avoid confusion.
+
+Signed-off-by: Simon Glass <sjg@chromium.org>
+---
+ include/configs/sunxi-common.h | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
+index ff356e3..b26363d 100644
+--- a/include/configs/sunxi-common.h
++++ b/include/configs/sunxi-common.h
+@@ -174,6 +174,7 @@
+
+ #define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */
+ #define CONFIG_IDENT_STRING " Allwinner Technology"
++#define CONFIG_DISPLAY_BOARDINFO
+
+ #define CONFIG_ENV_OFFSET (544 << 10) /* (8 + 24 + 512) KiB */
+ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
diff --git a/package/boot/uboot-sunxi/patches/020-fix-bananapro-sata-LDO4.patch b/package/boot/uboot-sunxi/patches/020-fix-bananapro-sata-LDO4.patch
deleted file mode 100644
index ce131a3..0000000
--- a/package/boot/uboot-sunxi/patches/020-fix-bananapro-sata-LDO4.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 54be0f057825b886af008d8d43a97802e5537ab6 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Fri, 22 Jan 2016 14:55:47 +0100
-Subject: [PATCH] sunxi: Bananapro: Set LDO4 to 2.5V
-
-According to the Bananapro schematic VDD25-SATA either comes from a
-dedicated WL2003E25-5 LTO, or it is connected to LDO4 via a
-0 Ohm resistor.
-
-In practice it seems that LDO4 is used, so enable it and set it to 2.5V.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- configs/Bananapro_defconfig | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig
-index 40588b9..4f4a07b 100644
---- a/configs/Bananapro_defconfig
-+++ b/configs/Bananapro_defconfig
-@@ -17,3 +17,4 @@ CONFIG_CMD_GPIO=y
- CONFIG_NETCONSOLE=y
- CONFIG_ETH_DESIGNWARE=y
- CONFIG_USB_EHCI_HCD=y
-+CONFIG_AXP_ALDO4_VOLT=2500
diff --git a/package/boot/uboot-sunxi/patches/091-sun6i-sync-PLL1-multdiv-with-Boot1.patch b/package/boot/uboot-sunxi/patches/091-sun6i-sync-PLL1-multdiv-with-Boot1.patch
new file mode 100644
index 0000000..f782994
--- /dev/null
+++ b/package/boot/uboot-sunxi/patches/091-sun6i-sync-PLL1-multdiv-with-Boot1.patch
@@ -0,0 +1,37 @@
+From a58eb20fb80f478038243e9e0f30f6984725e265 Mon Sep 17 00:00:00 2001
+From: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
+Date: Tue, 6 Jan 2015 15:47:18 +0100
+Subject: sun6i: Sync PLL1 multipliers/dividers with Boot1
+
+This change syncs up the multipliers and dividers used to initialize
+PLL1 (i.e. the fast clock driving the ARM cores) with the values used
+in Allwinner's Boot1 on sun6i.
+
+More specifically, the following settings are now used:
+ * up to 768MHz: mul=2, div=2 (was: mul=1, div=1)
+ * up to 1152MHz: mul=3, div=2 (unchanged)
+ * above 1152MHz: mul=4, div=2 (was: mul=2, div=1)
+
+diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
+index cfb32b4..2986539 100644
+--- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
++++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
+@@ -102,11 +102,12 @@ void clock_set_pll1(unsigned int clk)
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ const int p = 0;
+- int k = 1;
+- int m = 1;
++ int k = 2;
++ int m = 2;
+
+ if (clk > 1152000000) {
+- k = 2;
++ k = 4;
++ m = 2;
+ } else if (clk > 768000000) {
+ k = 3;
+ m = 2;
+--
+cgit v0.10.2
+
diff --git a/package/boot/uboot-sunxi/patches/093-sun6i-fix-PLL-LDO-voltselect.patch b/package/boot/uboot-sunxi/patches/093-sun6i-fix-PLL-LDO-voltselect.patch
new file mode 100644
index 0000000..e6af765
--- /dev/null
+++ b/package/boot/uboot-sunxi/patches/093-sun6i-fix-PLL-LDO-voltselect.patch
@@ -0,0 +1,77 @@
+From b2b385df5095fff80b4655142f58a2a6801e6c80 Mon Sep 17 00:00:00 2001
+From: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
+Date: Tue, 6 Jan 2015 21:26:44 +0100
+Subject: sun6i: Fix and document PLL LDO voltage selection
+
+The PRCM_PLL_CTRL_LDO_OUT_L and PRCM_PLL_CTRL_LDO_OUT_H macros had
+their meaning reversed. This is fixed by this change-set. With this
+changed, the PRCM_PLL_CTRL_LDO_OUT_L(1370) now becomes self-evident
+as setting the voltage to 1.37v (which it had done all along, even
+though stating a different target voltage).
+
+After changing the PLL LDO setting, it will take a little while for
+the voltage output to settle. A sdelay()-based loop waits the same
+order of magnitude as Boot1.
+
+Furthermore, a bit of documentation is added to clarify that the
+required setting for the PLL LDO is 1.37v as per the A31 manual.
+
+diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
+index fa7ebd8..3a6e56e 100644
+--- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
++++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
+@@ -24,14 +24,27 @@ void clock_init_safe(void)
+ struct sunxi_prcm_reg * const prcm =
+ (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
+
+- /* Set PLL ldo voltage without this PLL6 does not work properly */
++ /* Set PLL ldo voltage without this PLL6 does not work properly.
++ *
++ * As the A31 manual states, that "before enable PLL, PLLVDD
++ * LDO should be set to 1.37v", we need to configure this to 2.5v
++ * in the "PLL Input Power Select" (0 << 15) and (7 << 16).
++ */
+ clrsetbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK,
+ PRCM_PLL_CTRL_LDO_KEY);
+ clrsetbits_le32(&prcm->pll_ctrl1, ~PRCM_PLL_CTRL_LDO_KEY_MASK,
+ PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN |
+- PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140));
++ PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1370) );
+ clrbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK);
+
++ /* Give the PLL LDO voltage setting some time to take hold.
++ * Notes:
++ * 1) We need to use sdelay() as the timers aren't set up yet.
++ * 2) The 100k iterations come from Boot1, which spin's for 100k
++ * iterations through a loop.
++ */
++ sdelay(100000);
++
+ clock_set_pll1(408000000);
+
+ writel(AHB1_ABP1_DIV_DEFAULT, &ccm->ahb1_apb1_div);
+diff --git a/arch/arm/include/asm/arch-sunxi/prcm.h b/arch/arm/include/asm/arch-sunxi/prcm.h
+index 82ed541..41a62a4 100644
+--- a/arch/arm/include/asm/arch-sunxi/prcm.h
++++ b/arch/arm/include/asm/arch-sunxi/prcm.h
+@@ -111,13 +111,13 @@
+ #define PRCM_PLL_CTRL_LDO_OUT_MASK \
+ __PRCM_PLL_CTRL_LDO_OUT(0x7)
+ /* When using the low voltage 20 mV steps, and high voltage 30 mV steps */
+-#define PRCM_PLL_CTRL_LDO_OUT_L(n) \
+- __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1000) / 20) & 0x7)
+ #define PRCM_PLL_CTRL_LDO_OUT_H(n) \
++ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1000) / 20) & 0x7)
++#define PRCM_PLL_CTRL_LDO_OUT_L(n) \
+ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1160) / 30) & 0x7)
+-#define PRCM_PLL_CTRL_LDO_OUT_LV(n) \
+- __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 20) + 1000)
+ #define PRCM_PLL_CTRL_LDO_OUT_HV(n) \
++ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 20) + 1000)
++#define PRCM_PLL_CTRL_LDO_OUT_LV(n) \
+ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 30) + 1160)
+ #define PRCM_PLL_CTRL_LDO_KEY (0xa7 << 24)
+ #define PRCM_PLL_CTRL_LDO_KEY_MASK (0xff << 24)
+--
+cgit v0.10.2
+
diff --git a/package/boot/uboot-sunxi/patches/100-sun6i-alternate-on-UART2.patch b/package/boot/uboot-sunxi/patches/100-sun6i-alternate-on-UART2.patch
new file mode 100644
index 0000000..46c4972
--- /dev/null
+++ b/package/boot/uboot-sunxi/patches/100-sun6i-alternate-on-UART2.patch
@@ -0,0 +1,21 @@
+From d7311b6e7cdd1fc0e92665188e650934718cb2b1 Mon Sep 17 00:00:00 2001
+From: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
+Date: Tue, 16 Jun 2015 10:52:01 +0200
+Subject: sun6i: define alternate-function for UART2 on GPG
+
+
+diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
+index 8e67b3b..1fbf494 100644
+--- a/arch/arm/include/asm/arch-sunxi/gpio.h
++++ b/arch/arm/include/asm/arch-sunxi/gpio.h
+@@ -177,6 +177,7 @@ enum sunxi_gpio_number {
+ #define SUN6I_GPG_SDC1 2
+ #define SUN8I_GPG_SDC1 2
+ #define SUN6I_GPG_TWI3 2
++#define SUN6I_GPG_UART2 2
+ #define SUN5I_GPG_UART1 4
+
+ #define SUN4I_GPH_SDC1 5
+--
+cgit v0.10.2
+
diff --git a/package/boot/uboot-sunxi/patches/101-sun6i-support-console-on-UART2.patch b/package/boot/uboot-sunxi/patches/101-sun6i-support-console-on-UART2.patch
new file mode 100644
index 0000000..2b17999
--- /dev/null
+++ b/package/boot/uboot-sunxi/patches/101-sun6i-support-console-on-UART2.patch
@@ -0,0 +1,37 @@
+From c058dfb69136d62f88ae8b121104bdb7ce2df03f Mon Sep 17 00:00:00 2001
+From: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
+Date: Tue, 16 Jun 2015 10:53:11 +0200
+Subject: ARM: sun6i: Support console on UART2 (GPG6/GPG7)
+
+
+diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
+index 5f39aa0..99675c3 100644
+--- a/arch/arm/cpu/armv7/sunxi/board.c
++++ b/arch/arm/cpu/armv7/sunxi/board.c
+@@ -76,6 +76,10 @@ static int gpio_init(void)
+ sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG_UART1);
+ sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG_UART1);
+ sunxi_gpio_set_pull(SUNXI_GPG(4), SUNXI_GPIO_PULL_UP);
++#elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN6I)
++ sunxi_gpio_set_cfgpin(SUNXI_GPG(6), SUN6I_GPG_UART2);
++ sunxi_gpio_set_cfgpin(SUNXI_GPG(7), SUN6I_GPG_UART2);
++ sunxi_gpio_set_pull(SUNXI_GPG(7), SUNXI_GPIO_PULL_UP);
+ #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN8I_GPB_UART2);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_GPB_UART2);
+diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
+index 9576bc1..bda4059 100644
+--- a/include/configs/sunxi-common.h
++++ b/include/configs/sunxi-common.h
+@@ -260,6 +260,8 @@ extern int soft_i2c_gpio_scl;
+ #endif
+ #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
+ #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200"
++#elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN6I)
++#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200"
+ #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
+ #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200"
+ #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
+--
+cgit v0.10.2
+
diff --git a/package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch b/package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch
new file mode 100644
index 0000000..bf00343
--- /dev/null
+++ b/package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch
@@ -0,0 +1,28 @@
+From 78d5fab8e345b1273ec8c22d06f1a1d27670b518 Mon Sep 17 00:00:00 2001
+From: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
+Date: Tue, 16 Jun 2015 10:59:38 +0200
+Subject: ARM: sunxi: Make CONS_INDEX configurable
+
+
+diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
+index 2a1cd3c..e155c4c 100644
+--- a/board/sunxi/Kconfig
++++ b/board/sunxi/Kconfig
+@@ -209,6 +209,14 @@ config SYS_BOARD
+ config SYS_SOC
+ default "sunxi"
+
++config CONS_INDEX
++ int "UART used for console"
++ range 1 5
++ default 1
++ ---help---
++ Defines the UART port used for serial output. It starts at 1 so UART0 is 1,
++ UART1 is 2 and so on.
++
+ config UART0_PORT_F
+ bool "UART0 on MicroSD breakout board"
+ default n
+--
+cgit v0.10.2
+