diff options
| author | Felix Fietkau <nbd@openwrt.org> | 2008-06-15 11:11:28 +0000 |
|---|---|---|
| committer | Felix Fietkau <nbd@openwrt.org> | 2008-06-15 11:11:28 +0000 |
| commit | ddd809f9e56e3a30d459d6189a1582808d204821 (patch) | |
| tree | 42452684184365d849557d88c0a7155f32287ad3 /package/broadcom-57xx/src/Makefile | |
| parent | 20937ce81a7807fb3506728edaaff731cee7e18c (diff) | |
| download | mtk-20170518-ddd809f9e56e3a30d459d6189a1582808d204821.zip mtk-20170518-ddd809f9e56e3a30d459d6189a1582808d204821.tar.gz mtk-20170518-ddd809f9e56e3a30d459d6189a1582808d204821.tar.bz2 | |
(6/6) bcm57xx: package
This is the bcm57xx package. I have tested default vlan functions,
but I dont have the equipment to test more advanced setups. The default
vlan setup seems to be working fine. I also added the activate_gpio
parameter which will make the driver activate the switch via gpio before
probing for it.
I'm not sure which method is best for autoload. For the wrt350n, I
need the activate_gpio parameter. But its probably not a good idea
to add that to the autoload file. On a system without a bcm57xx switch,
isn't it a bad idea to mess with the gpios looking for the switch? Ideally,
wouldn't it be best to load the bcm57xx module from broadcom-diag, after
it has determined which router its on? I tried using 'request_module' from
there, but had no success. For now, I am relying on preinit to load
the bcm57xx module with activate_gpio param, after it has failed to load
switch_robo and switch_adm.
Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>
SVN-Revision: 11471
Diffstat (limited to 'package/broadcom-57xx/src/Makefile')
| -rw-r--r-- | package/broadcom-57xx/src/Makefile | 17 |
1 files changed, 17 insertions, 0 deletions
diff --git a/package/broadcom-57xx/src/Makefile b/package/broadcom-57xx/src/Makefile new file mode 100644 index 0000000..08a7914 --- /dev/null +++ b/package/broadcom-57xx/src/Makefile @@ -0,0 +1,17 @@ +# +# Broadcom BCM57XX Gigabit Ethernet driver make file. +# +# $Id: Makefile,v 1.1.1.4 2006/09/26 02:17:12 michael Exp $ +# + +O_TARGET = bcm57xx.o + +EXTRA_CFLAGS += -DDBG=0 -DBCM_PROC_FS=1 -DT3_JUMBO_RCV_RCB_ENTRY_COUNT=256 +EXTRA_CFLAGS += -DPCIX_TARGET_WORKAROUND=1 -DINCLUDE_TBI_SUPPORT=1 -DINCLUDE_5701_AX_FIX=1 + +export-objs := + +obj-y := b57um.o tigon3.o autoneg.o 5701rls.o tcp_seg.o hndgige.o bcmrobo.o +obj-m := $(O_TARGET) + +include $(TOPDIR)/Rules.make |