broadcom-diag: add support for some new devices

There is still no Ethernet driver for these devices in trunk.

Thanks George Kashperko for the patch.

SVN-Revision: 29735

1 files changed, 73 insertions, 0 deletions

diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c
index 00a72e9..e60b66c 100644
--- a/package/broadcom-diag/src/diag.c
+++ b/package/broadcom-diag/src/diag.c
@@ -59,6 +59,8 @@ enum {
 	WRT600N,
 	WRT600NV11,
 	WRT610N,
+	WRT610NV2,
+	E3000V1,
 
 	/* ASUS */
 	WLHDD,
@@ -74,6 +76,7 @@ enum {
 	WL520GU,
 	ASUS_4702,
 	WL700GE,
+	RTN16,
 
 	/* Buffalo */
 	WBR2_G54,
@@ -107,6 +110,7 @@ enum {
 
 	/* Belkin */
 	BELKIN_UNKNOWN,
+	BELKIN_F7D4301,
 
 	/* Netgear */
 	WGT634U,
@@ -364,6 +368,34 @@ static struct platform_t __initdata platforms[] = {
 			{ .name = "ses_blue",   .gpio = 1 << 9,  .polarity = REVERSE }, // WiFi protected setup LED blue
 		},
 	},
+	[WRT610NV2] = {
+		.name		= "Linksys WRT610N V2",
+		.buttons	= {
+			{ .name = "reset",	.gpio = 1 << 6 },
+			{ .name = "ses",	.gpio = 1 << 4 },
+		},
+		.leds		= {
+			{ .name = "power",	.gpio = 1 << 5,	.polarity = NORMAL },	// Power LED
+			{ .name = "usb",	.gpio = 1 << 7,	.polarity = NORMAL },	// USB LED
+			{ .name = "ses_amber",	.gpio = 1 << 0,	.polarity = REVERSE },	// WiFi protected setup LED amber
+			{ .name = "ses_blue",	.gpio = 1 << 3,	.polarity = REVERSE },	// WiFi protected setup LED blue
+			{ .name = "wlan",	.gpio = 1 << 1,	.polarity = NORMAL },	// Wireless LED
+		},
+	},
+	[E3000V1] = {
+		.name		= "Linksys E3000 V1",
+		.buttons	= {
+			{ .name = "reset",	.gpio = 1 << 6 },
+			{ .name = "ses",	.gpio = 1 << 4 },
+		},
+		.leds		= {
+			{ .name = "power",	.gpio = 1 << 5,	.polarity = NORMAL },	// Power LED
+			{ .name = "usb",	.gpio = 1 << 7,	.polarity = NORMAL },	// USB LED
+			{ .name = "ses_amber",	.gpio = 1 << 0,	.polarity = REVERSE },	// WiFi protected setup LED amber
+			{ .name = "ses_blue",	.gpio = 1 << 3,	.polarity = REVERSE },	// WiFi protected setup LED blue
+			{ .name = "wlan",	.gpio = 1 << 1,	.polarity = NORMAL },	// Wireless LED
+		},
+	},
 	/* Asus */
 	[WLHDD] = {
 		.name		= "ASUS WL-HDD",
@@ -503,6 +535,17 @@ static struct platform_t __initdata platforms[] = {
 		},
 		.platform_init = bcm4780_init,
 	},
+	[RTN16] = {
+		.name		= "ASUS RT-N16",
+		.buttons	= {
+			{ .name = "reset",	.gpio = 1 << 8 },
+			{ .name = "ses",	.gpio = 1 << 5 },
+		},
+		.leds		= {
+			{ .name = "power",	.gpio = 1 << 1, .polarity = REVERSE },
+			{ .name = "wlan",	.gpio = 1 << 7, .polarity = NORMAL },
+		},
+	},
 	/* Buffalo */
 	[WHR_G54S] = {
 		.name		= "Buffalo WHR-G54S",
@@ -749,6 +792,19 @@ static struct platform_t __initdata platforms[] = {
 			{ .name = "connected",	.gpio = 1 << 0, .polarity = NORMAL },
 		},
 	},
+	[BELKIN_F7D4301] = {
+		.name		= "Belkin PlayMax F7D4301",
+		.buttons	= {
+			{ .name = "reset",	.gpio = 1 << 6 },
+			{ .name = "wps",	.gpio = 1 << 8 },
+		},
+		.leds		= {
+			{ .name = "power",	.gpio = 1 << 11, .polarity = REVERSE },
+			{ .name = "wlan",	.gpio = 1 << 13, .polarity = REVERSE },
+			{ .name = "led0",	.gpio = 1 << 14, .polarity = REVERSE },
+			{ .name = "led1",	.gpio = 1 << 15, .polarity = REVERSE },
+		},
+	},
 	/* Netgear */
 	[WGT634U] = {
 		.name		= "Netgear WGT634U",
@@ -962,6 +1018,10 @@ static struct platform_t __init *platform_detect(void)
 			return &platforms[WL520GU];
 		if (startswith(buf,"WL330GE-")) /* WL330GE-* */
 			return &platforms[WL330GE];
+		if (startswith(buf,"RT-N16-")) /* RT-N16-* */
+			return &platforms[RTN16];
+		if (startswith(buf,"F7D4301")) /* F7D4301* */
+			return &platforms[BELKIN_F7D4301];
 	}
 
 	/* Based on "ModelId" */
@@ -1011,6 +1071,19 @@ static struct platform_t __init *platform_detect(void)
 			return &platforms[WRT600N];
 	}
 
+	/*
+	 * Normally, these would go inside the "CFE based - newer hardware" block below; however, during early init, the
+	 * "pmon_ver" variable is not available on the E3000v1 (and probably the WRT610Nv2 also).  Until this is figured out,
+	 * these will need to remain here in order for platform detection to work.
+	 */
+	if (!strcmp(boardnum, "42")) { /* Linksys */
+		if (!strcmp(boardtype, "0x04cf") && !strcmp(getvar("boot_hw_model"), "E300") && !strcmp(getvar("boot_hw_ver"), "1.0"))
+			return &platforms[E3000V1];
+
+		if (!strcmp(boardtype, "0x04cf") && !strcmp(getvar("boot_hw_model"), "WRT610N") && !strcmp(getvar("boot_hw_ver"), "2.0"))
+			return &platforms[WRT610NV2];
+	}
+
 	if (startswith(getvar("pmon_ver"), "CFE")) {
 		/* CFE based - newer hardware */
 		if (!strcmp(boardnum, "42")) { /* Linksys */