summaryrefslogtreecommitdiff
path: root/package/firmware/linux-firmware
diff options
context:
space:
mode:
authorChristian Lamparter <chunkeey@googlemail.com>2016-10-05 14:53:11 +0200
committerJohn Crispin <john@phrozen.org>2016-10-15 11:36:50 +0200
commit098f7156cc68d07a8eed9574c76b90c7ade77026 (patch)
tree57d71f1eef6e8fa33320a617dee42309ebbf41c3 /package/firmware/linux-firmware
parente9455c561d4af68840421e3d442e4ad5ebfbedc6 (diff)
downloadmtk-20170518-098f7156cc68d07a8eed9574c76b90c7ade77026.zip
mtk-20170518-098f7156cc68d07a8eed9574c76b90c7ade77026.tar.gz
mtk-20170518-098f7156cc68d07a8eed9574c76b90c7ade77026.tar.bz2
ar71xx: add support for the Airtight C-60
This patch adds support for the Airtight C-60. SOC: Atheros AR9344 rev 2 (CPU:560.000MHz) RAM: 128 MiB NOR: MX25L3205D 4MiB NAND: ST Micro NAND 32MiB 3,3V 8-bit SW-NET: AR8327N (2 Ports) WLAN1: Dual-Band AR9340 Rev:2 (built-in SoC) WLAN2: Dual-Band AR9300 Rev:4 PCIe Chip The switch is setup for an accesspoint: LAN1: (gigabit) is the wan-port. LAN2: (fast ethernet) is bridged with the br-lan. Flashing Guide (via initramfs): 1. Connect a PC to the serial port of the C-60. power up the C-60. Enter u-boot command prompt: #> nand erase #> setenv bootcmd "bootm 0x9f060000" #> saveenv #> setenv ipaddr 192.168.1.1 #> setenv netmask 255.255.255.0 #> setenv serverip 192.168.1.100 #> setenv bootfile lede-ar71xx-nand-c-60-initramfs-kernel.bin #> tftpboot #> bootm 2. Wait for the C-60 to boot LEDE. On the root prompt. Enter: # ubiformat /dev/mtd4 # ubiattach -p /dev/mtd4 3. After that copy the sysupgrade.tar onto the router and run: # sysupgrade sysupgrade.tar to flash the image. Special thanks to Chris Blake <chrisrblake93@gmail.com>. He provided a C-60 unit and he helped with debugging the switch, LEDs and platfrom support. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Diffstat (limited to 'package/firmware/linux-firmware')
0 files changed, 0 insertions, 0 deletions