adds voip support

SVN-Revision: 20637

5 files changed, 285 insertions, 0 deletions

diff --git a/package/ifx-tapidemo/Config.in b/package/ifx-tapidemo/Config.in
new file mode 100644
index 0000000..32594ba
--- /dev/null
+++ b/package/ifx-tapidemo/Config.in
@@ -0,0 +1,36 @@
+choice
+	prompt "board selection"
+	default VOICE_CPE_TAPIDEMO_BOARD_EASY50712_V3  if TARGET_ifxmips_platform_danube
+	default VOICE_CPE_TAPIDEMO_BOARD_EASY508xx     if TARGET_ifxmips_platform_ar9
+	default VOICE_CPE_TAPIDEMO_BOARD_EASY80910     if TARGET_ifxmips_platform_vr9
+	default VOICE_CPE_TAPIDEMO_BOARD_EASY50812
+	help
+		Select the target platform.
+
+	config VOICE_CPE_TAPIDEMO_BOARD_EASY50712
+		bool "Danube reference board"
+
+	config VOICE_CPE_TAPIDEMO_BOARD_EASY50712_V3
+		bool "Danube reference board V3"
+
+	config VOICE_CPE_TAPIDEMO_BOARD_EASY508xx
+		bool "AR9/GR9 reference board"
+
+	config VOICE_CPE_TAPIDEMO_BOARD_EASY80910
+		bool "VR9 reference board"
+endchoice
+
+config VOICE_CPE_TAPIDEMO_QOS
+	bool "enable QOS support"
+	default n
+	help
+		Option to enable the KPI2UDP RTP packet acceleration path
+		(highly recommended for VoIP).
+
+config  VOICE_CPE_TAPIDEMO_FAX_T.38_FW
+	bool "enable T.38 fax relay"
+	depends on (TARGET_ifxmips_platform_ar9 || TARGET_ifxmips_platform_vr9)
+	default n
+	help
+		enable T.38 fax relay demo.
+
diff --git a/package/ifx-tapidemo/Makefile b/package/ifx-tapidemo/Makefile
new file mode 100644
index 0000000..217d464
--- /dev/null
+++ b/package/ifx-tapidemo/Makefile
@@ -0,0 +1,70 @@
+#
+# Copyright (C) 2008 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+# $Id: $
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=tapidemo
+PKG_VERSION:=5.0.1.27
+PKG_RELEASE:=1
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources
+PKG_MD5SUM:=a38a7bf3242aad607f50f57b988bc87c
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ifx-tapidemo
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=TAPIdemo application for Lantiq boards
+  URL:=http://www.lantiq.com/
+  MAINTAINER:=Lantiq
+  DEPENDS:=+kmod-ifx-tapi +kmod-ifx-vmmc @BROKEN
+endef
+
+define Package/ifx-tapidemo/description
+	Voice Access mini-PBX Demo Application
+endef
+
+define Package/ifx-tapidemo/config
+	if PACKAGE_ifx-tapidemo
+		source "$(SOURCE)/Config.in"
+	endif
+endef
+
+CONFIGURE_ARGS += \
+	ARCH=$(LINUX_KARCH) \
+	--enable-linux-26 \
+	--enable-kernelincl="$(LINUX_DIR)/include" \
+	--with-drvincl="$(STAGING_DIR)/usr/include" \
+	$(call autoconf_bool,CONFIG_VOICE_CPE_TAPI_QOS,qos) \
+	$(call autoconf_bool,CONFIG_VOICE_CPE_TAPIDEMO_FAX_T,fax-t38) \
+	--enable-trace \
+	--enable-fs
+
+ifeq ($(CONFIG_VOICE_CPE_TAPIDEMO_BOARD_EASY50712),y)
+  CONFIGURE_ARGS += --enable-boardname=EASY50712
+endif
+ifeq ($(CONFIG_VOICE_CPE_TAPIDEMO_BOARD_EASY50712_V3),y)
+  CONFIGURE_ARGS += --enable-boardname=EASY50712_V3
+endif
+ifeq ($(CONFIG_VOICE_CPE_TAPIDEMO_BOARD_EASY508xx),y)
+  CONFIGURE_ARGS += --enable-boardname=EASY508XX
+endif
+ifeq ($(CONFIG_VOICE_CPE_TAPIDEMO_BOARD_EASY80910),y)
+  CONFIGURE_ARGS += --enable-boardname=EASY508XX
+endif
+
+define Package/ifx-tapidemo/install
+	$(INSTALL_DIR) $(1)/usr/sbin $(1)/etc/init.d/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/tapidemo $(1)/usr/sbin
+	$(INSTALL_BIN) ./files/bringup_tapidemo $(1)/etc/init.d/tapidemo
+endef
+
+$(eval $(call BuildPackage,ifx-tapidemo))
diff --git a/package/ifx-tapidemo/files/bringup_tapidemo b/package/ifx-tapidemo/files/bringup_tapidemo
new file mode 100644
index 0000000..e3abd56
--- /dev/null
+++ b/package/ifx-tapidemo/files/bringup_tapidemo
@@ -0,0 +1,89 @@
+#!/bin/sh /etc/rc.common
+# (C) 2008 openwrt.org
+
+START=96
+
+[ ! -f /dev/vmmc10 ] && {
+	mknod /dev/vmmc10 c 122 10
+	mknod /dev/vmmc11 c 122 11
+	mknod /dev/vmmc12 c 122 12
+	mknod /dev/vmmc13 c 122 13
+	mknod /dev/vmmc14 c 122 14
+	mknod /dev/vmmc15 c 122 15
+	mknod /dev/vmmc16 c 122 16
+	mknod /dev/vmmc17 c 122 17
+	mknod /dev/vmmc18 c 122 18
+}
+
+TD_EXTRA_FLAGS_FXO=
+TD_EXTRA_FLAGS_KPI2UDP=
+TD_DOWNLOAD_PATH=/opt/lantiq/downloads/
+DEV_NODE_TERIDIAN=ter10
+
+ # Show help
+help()
+{
+	 echo "Usage:"
+	 echo " - $0 WAN-IF-NAME - start TAPIDEMO without FXO support"
+	 echo " - $0 WAN-IF-NAME fxo - start TAPIDEMO with FXO support."
+	 echo " - $0 stop - stop TAPIDEMO"
+}
+
+# Check if device node for Teridian exists
+checkFxoSupport()
+{
+	if [ ! -e /dev/$DEV_NODE_TERIDIAN ];then
+		echo "FXO support is disabled. Can not find required driver's device node."
+	else
+		TD_EXTRA_FLAGS_FXO="-x"
+	fi
+}
+
+# Check if module drv_kpi2udp is loaded
+checkKpi2UdpSupport()
+{
+	tmp=`cat /proc/modules | grep 'drv_kpi2udp '`
+	if [ "$tmp" != "" ]; then
+		TD_EXTRA_FLAGS_KPI2UDP="-q"
+	fi
+}
+
+start()
+{
+	TD_WANIF=$1
+
+	TD_WANIF_IP=`ifconfig $TD_WANIF | grep 'inet addr:' | cut -f2 -d: | cut -f1 -d' '`
+	if [ "$TD_WANIF_IP" = "" ]; then
+		echo "Error, getting IP address for network device $TD_WANIF failed."
+		exit 1
+	fi
+
+	if [ "$2" = "" ];then
+		# FXO support is disabled.
+	  continue
+	elif [ "$2" = "fxo" ];then
+	  checkFxoSupport
+	else
+	  echo "Error, unknown second parameter."
+	  help
+	  exit 1
+	fi
+
+	checkKpi2UdpSupport
+
+	if [ -r /etc/rc.conf ]; then
+		. /etc/rc.conf
+	fi
+
+	TD_DEBUG_LEVEL=$tapiDebugLevel
+	if [ "$TD_DEBUG_LEVEL" = "" ]; then
+		TD_DEBUG_LEVEL=3
+	fi
+
+	/usr/sbin/tapidemo -d $TD_DEBUG_LEVEL $TD_EXTRA_FLAGS_FXO $TD_EXTRA_FLAGS_KPI2UDP -i $TD_WANIF_IP -l $TD_DOWNLOAD_PATH &
+}
+
+stop()
+{
+	 killall tapidemo > /dev/null 2> /dev/null
+}
diff --git a/package/ifx-tapidemo/patches/100-ifxmips.patch b/package/ifx-tapidemo/patches/100-ifxmips.patch
new file mode 100644
index 0000000..43fa988
--- /dev/null
+++ b/package/ifx-tapidemo/patches/100-ifxmips.patch
@@ -0,0 +1,78 @@
+--- a/src/board_easy50712.c	Mon Mar 15 14:47:53 2010 +0300
++++ b/src/board_easy50712.c	Tue Mar 16 17:25:55 2010 +0300
+@@ -40,7 +40,9 @@
+    #endif /* DUSLIC_FXO */
+ #endif /* EASY50712_V3 */
+ 
+-#include "asm/ifx/ifx_gpio.h"
++#ifdef FXO
++#  include "asm/ifx/ifx_gpio.h"
++#endif
+ 
+ /* ============================= */
+ /* Defines                       */
+@@ -896,6 +898,7 @@
+ /* Global function definition    */
+ /* ============================= */
+ 
++#ifdef FXO
+ /**
+    Set direction of GPIO pin to out which is used for set/clear reset.
+ 
+@@ -944,7 +947,7 @@
+          return IFX_SUCCESS;
+       }
+       break;
+-      
++
+       case GPIO_DUSLIC_EASY50510:
+       {
+          TRACE(TAPIDEMO, DBG_LEVEL_LOW,
+@@ -982,8 +985,9 @@
+ 
+    return IFX_SUCCESS;
+ };
++#endif
+ 
+-
++#ifdef FXO
+ /*
+    Set/Clear reset of device by using GPIO port.
+ 
+@@ -1086,7 +1090,9 @@
+    /* usleep(100000); karol - workaround, */
+    return ret;
+ }
++#endif
+ 
++#ifdef EASY50510
+ /**
+    Set PCM master mode.
+ 
+@@ -1178,15 +1184,16 @@
+ 
+    return ret;
+ }
++#endif
+ 
+ /**
+    Register board.
+ 
+    \param pBoard - pointer to board
+- 
++
+    \return IFX_SUCCESS if successful, otherwise IFX_ERROR.
+ 
+-   \remarks 
++   \remarks
+ */
+ IFX_return_t BOARD_Easy50712_Register(BOARD_t* pBoard)
+ {
+@@ -1204,7 +1211,3 @@
+    pBoard->RemoveBoard = BOARD_Easy50712_RemoveBoard;
+    return IFX_SUCCESS;
+ }
+-
+-
+-
+-
diff --git a/package/ifx-tapidemo/patches/110-no_echo_cancelation.patch b/package/ifx-tapidemo/patches/110-no_echo_cancelation.patch
new file mode 100644
index 0000000..d424d48
--- /dev/null
+++ b/package/ifx-tapidemo/patches/110-no_echo_cancelation.patch
@@ -0,0 +1,12 @@
+Index: tapidemo-5.0.1.27/src/device_vmmc.c
+===================================================================
+--- tapidemo-5.0.1.27.orig/src/device_vmmc.c	2009-11-09 15:40:31.000000000 +0100
++++ tapidemo-5.0.1.27/src/device_vmmc.c	2010-03-30 21:32:51.000000000 +0200
+@@ -240,7 +240,6 @@
+       TRACE(TAPIDEMO, DBG_LEVEL_HIGH,
+             ("Error, BBD file %s is not found.\n(File: %s, line: %d)\n",
+              pCpuDevice->pszBBD_CRAM_File, __FILE__, __LINE__));
+-      return IFX_ERROR;
+    }
+ 
+ #endif /* USE_FILESYSTEM */