packages: clean up the package folder

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37007

3 files changed, 562 insertions, 0 deletions

diff --git a/package/kernel/hostap-driver/Makefile b/package/kernel/hostap-driver/Makefile
new file mode 100644
index 0000000..d08fd9c
--- /dev/null
+++ b/package/kernel/hostap-driver/Makefile
@@ -0,0 +1,117 @@
+# 
+# Copyright (C) 2006-2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=hostap-driver
+PKG_VERSION:=0.4.9
+PKG_RELEASE:=2
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=http://hostap.epitest.fi/releases/
+PKG_MD5SUM:=c7534dc040ab90218257a78488ecd378
+
+include $(INCLUDE_DIR)/package.mk
+
+define KernelPackage/hostap/Default
+  VERSION:=$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE)
+  SUBMENU:=Wireless Drivers
+  URL:=http://hostap.epitest.fi/
+endef
+
+define KernelPackage/hostap/Default/description
+ Host AP is a driver for 802.11b wireless cards based on Intersil 
+ Prism2/2.5/3 chipset. It supports so called Host AP mode that allows the 
+ card to act as an IEEE 802.11 access point.
+endef
+
+
+define KernelPackage/hostap
+$(call KernelPackage/hostap/Default)
+  TITLE:=Host AP support for Prism2/2.5/3
+  DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT +kmod-lib80211 +wireless-tools
+  KCONFIG:=CONFIG_HOSTAP CONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+  FILES:=$(LINUX_DIR)/drivers/net/wireless/hostap/hostap.ko
+  AUTOLOAD:=$(call AutoLoad,60,hostap)
+endef
+
+define KernelPackage/hostap/description
+$(call KernelPackage/hostap/Default/description)
+ This package contains the base Host AP driver code that is shared by 
+ different hardware models. You will also need to enable support for 
+ PLX/PCI/CS version of the driver to actually use the driver.
+endef
+
+
+define KernelPackage/hostap-cs
+$(call KernelPackage/hostap/Default)
+  TITLE:=Host AP driver for PCMCIA adaptors
+  DEPENDS:=@PCMCIA_SUPPORT +kmod-hostap +kmod-pcmcia-core
+  KCONFIG:=CONFIG_HOSTAP_CS
+  FILES:=$(LINUX_DIR)/drivers/net/wireless/hostap/hostap_cs.ko
+  AUTOLOAD:=$(call AutoLoad,60,hostap_cs)
+endef
+
+define KernelPackage/hostap-cs/description
+$(call KernelPackage/hostap/Default/description)
+ This package contains the Host AP driver for Prism2/2.5/3 PC cards.
+endef
+
+
+define KernelPackage/hostap-pci
+$(call KernelPackage/hostap/Default)
+  TITLE:=Host AP driver for PCI adaptors
+  DEPENDS:=@PCI_SUPPORT +kmod-hostap
+  KCONFIG:=CONFIG_HOSTAP_PCI
+  FILES:=$(LINUX_DIR)/drivers/net/wireless/hostap/hostap_pci.ko
+  AUTOLOAD:=$(call AutoLoad,60,hostap_pci)
+endef
+
+define KernelPackage/hostap-pci/description
+$(call KernelPackage/hostap/Default/description)
+ This package contains the Host AP driver for Prism2.5 PCI adaptors.
+endef
+
+
+define KernelPackage/hostap-plx
+$(call KernelPackage/hostap/Default)
+  TITLE:=Host AP driver for PLX9052 based PCI adaptors
+  DEPENDS:=@PCI_SUPPORT +kmod-hostap
+  KCONFIG:=CONFIG_HOSTAP_PLX
+  FILES:=$(LINUX_DIR)/drivers/net/wireless/hostap/hostap_plx.ko
+  AUTOLOAD:=$(call AutoLoad,60,hostap_plx)
+endef
+
+define KernelPackage/hostap-plx/description
+$(call KernelPackage/hostap/Default/description)
+ This package contains the Host AP driver for Prism2/2.5/3 in PLX9052 
+ based PCI adaptors.
+endef
+
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+endef
+
+define Build/Configure
+
+endef
+
+define Build/Compile
+
+endef
+
+define KernelPackage/hostap/install
+	$(INSTALL_DIR) $(1)/lib/wifi
+	$(INSTALL_DATA) ./files/lib/wifi/hostap.sh $(1)/lib/wifi
+endef
+
+$(eval $(call KernelPackage,hostap))
+$(eval $(call KernelPackage,hostap-cs))
+$(eval $(call KernelPackage,hostap-pci))
+$(eval $(call KernelPackage,hostap-plx))
diff --git a/package/kernel/hostap-driver/files/lib/wifi/hostap.sh b/package/kernel/hostap-driver/files/lib/wifi/hostap.sh
new file mode 100755
index 0000000..62d2e7e
--- /dev/null
+++ b/package/kernel/hostap-driver/files/lib/wifi/hostap.sh
@@ -0,0 +1,270 @@
+#!/bin/sh
+append DRIVERS "prism2"
+
+find_prism2_phy() {
+	local device="$1"
+
+	local macaddr="$(config_get "$device" macaddr | tr 'A-Z' 'a-z')"
+	config_get phy "$device" phy
+	[ -z "$phy" -a -n "$macaddr" ] && {
+		cd /proc/net/hostap
+		for phy in $(ls -d wlan* 2>&-); do
+			[ "$macaddr" = "$(cat /sys/class/net/${phy}/address)" ] || continue
+			config_set "$device" phy "$phy"
+			break
+		done
+		config_get phy "$device" phy
+	}
+	[ -n "$phy" -a -d "/proc/net/hostap/$phy" ] || {
+		echo "phy for wifi device $1 not found"
+		return 1
+	}
+	[ -z "$macaddr" ] && {
+		config_set "$device" macaddr "$(cat /sys/class/net/${phy}/address)"
+	}
+	return 0
+}
+
+scan_prism2() {
+	local device="$1"
+	local mainvif
+	local wds
+
+	[ ${device%[0-9]} = "wlan" ] && config_set "$device" phy "$device" || find_prism2_phy "$device" || {
+		config_unset "$device" vifs
+		return 0
+	}
+	config_get phy "$device" phy
+
+	config_get vifs "$device" vifs
+	local _c=0
+	for vif in $vifs; do
+		config_get_bool disabled "$vif" disabled 0
+		[ $disabled = 0 ] || continue
+
+		config_get mode "$vif" mode
+		case "$mode" in
+			adhoc|sta|ap|monitor)
+				# Only one vif is allowed on AP, station, Ad-hoc or monitor mode
+				[ -z "$mainvif" ] && {
+					mainvif="$vif"
+					config_set "$vif" ifname "$phy"
+				}
+			;;
+			wds)
+				config_get ssid "$vif" ssid
+				[ -z "$ssid" ] && continue
+				config_set "$vif" ifname "${phy}wds${_c}"
+				_c=$(($_c + 1))
+				addr="$ssid"
+				${addr:+append wds "$vif"}
+			;;
+			*) echo "$device($vif): Invalid mode, ignored."; continue;;
+		esac
+	done
+	config_set "$device" vifs "${mainvif:+$mainvif }${wds:+$wds}"
+}
+
+disable_prism2() (
+	local device="$1"
+
+	find_prism2_phy "$device" || return 0
+	config_get phy "$device" phy
+
+	set_wifi_down "$device"
+
+	include /lib/network
+	while read line < /proc/net/hostap/${phy}/wds; do
+		set $line
+		[ -f "/var/run/wifi-${1}.pid" ] &&
+			kill "$(cat "/var/run/wifi-${1}.pid")"
+		ifconfig "$1" down
+		unbridge "$1"
+		iwpriv "$phy" wds_del "$2"
+	done
+	unbridge "$phy"
+	return 0
+)
+
+enable_prism2() {
+	local device="$1"
+
+	find_prism2_phy "$device" || return 0
+	config_get phy "$device" phy
+
+	config_get rxantenna "$device" rxantenna
+	config_get txantenna "$device" txantenna
+	config_get_bool diversity "$device" diversity
+	[ -n "$diversity" ] && {
+		rxantenna="1"
+		txantenna="1"
+	}
+	[ -n "$rxantenna" ] && iwpriv "$phy" antsel_rx "$rxantenna"
+	[ -n "$txantenna" ] && iwpriv "$phy" antsel_tx "$txantenna"
+
+	config_get channel "$device" channel
+	[ -n "$channel" ] && iwconfig "$phy" channel "$channel" >/dev/null 2>/dev/null
+
+	config_get txpower "$device" txpower
+	[ -n "$txpower" ] && iwconfig "$phy" txpower "${txpower%%.*}"
+
+	config_get vifs "$device" vifs
+	local first=1
+	for vif in $vifs; do
+		config_get ifname "$vif" ifname
+		config_get ssid "$vif" ssid
+		config_get mode "$vif" mode
+
+		[ "$mode" = "wds" ] || iwconfig "$phy" essid ${ssid:+-- }"${ssid:-any}"
+
+		case "$mode" in
+			sta)
+				iwconfig "$phy" mode managed
+				config_get addr "$device" bssid
+				[ -z "$addr" ] || { 
+					iwconfig "$phy" ap "$addr"
+				}
+			;;
+			ap) iwconfig "$phy" mode master;;
+			wds) iwpriv "$phy" wds_add "$ssid";;
+			adhoc) iwconfig "$phy" mode ad-hoc;;
+			*) iwconfig "$phy" mode "$mode";;
+		esac
+
+		[ "$first" = 1 ] && {
+			config_get rate "$vif" rate
+			[ -n "$rate" ] && iwconfig "$phy" rate "${rate%%.*}"
+
+			config_get_bool hidden "$vif" hidden 0
+			iwpriv "$phy" enh_sec "$hidden"
+
+			config_get frag "$vif" frag
+			[ -n "$frag" ] && iwconfig "$phy" frag "${frag%%.*}"
+
+			config_get rts "$vif" rts
+			[ -n "$rts" ] && iwconfig "$phy" rts "${rts%%.*}"
+
+			config_get maclist "$vif" maclist
+			[ -n "$maclist" ] && {
+				# flush MAC list
+				iwpriv "$phy" maccmd 3
+				for mac in $maclist; do
+					iwpriv "$phy" addmac "$mac"
+				done
+			}
+			config_get macpolicy "$vif" macpolicy
+			case "$macpolicy" in
+				allow)
+					iwpriv "$phy" maccmd 2
+				;;
+				deny)
+					iwpriv "$phy" maccmd 1
+				;;
+				*)
+					# default deny policy if mac list exists
+					[ -n "$maclist" ] && iwpriv "$phy" maccmd 1
+				;;
+			esac
+			# kick all stations if we have policy explicitly set
+			[ -n "$macpolicy" ] && iwpriv "$phy" maccmd 4
+		}
+
+		config_get enc "$vif" encryption
+		case "$enc" in
+			WEP|wep)
+				for idx in 1 2 3 4; do
+					config_get key "$vif" "key${idx}"
+					iwconfig "$ifname" enc "[$idx]" "${key:-off}"
+				done
+				config_get key "$vif" key
+				key="${key:-1}"
+				case "$key" in
+					[1234]) iwconfig "$ifname" enc "[$key]";;
+					*) iwconfig "$ifname" enc "$key";;
+				esac
+			;;
+			psk*|wpa*)
+				start_hostapd=1
+				config_get key "$vif" key
+			;;
+		esac
+
+		local net_cfg bridge
+		net_cfg="$(find_net_config "$vif")"
+		[ -z "$net_cfg" ] || {
+			bridge="$(bridge_interface "$net_cfg")"
+			config_set "$vif" bridge "$bridge"
+			start_net "$ifname" "$net_cfg"
+		}
+		set_wifi_up "$vif" "$ifname"
+
+		case "$mode" in
+			ap)
+				if [ -n "$start_hostapd" ] && eval "type hostapd_setup_vif" 2>/dev/null >/dev/null; then
+					hostapd_setup_vif "$vif" hostap || {
+						echo "enable_prism2($device): Failed to set up hostapd for interface $ifname" >&2
+						# make sure this wifi interface won't accidentally stay open without encryption
+						ifconfig "$ifname" down
+						continue
+					}
+				fi
+			;;
+			wds|sta)
+				if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
+					wpa_supplicant_setup_vif "$vif" wext || {
+						echo "enable_prism2($device): Failed to set up wpa_supplicant for interface $ifname" >&2
+						ifconfig "$ifname" down
+						continue
+					}
+				fi
+			;;
+		esac
+		first=0
+	done
+
+}
+
+check_prism2_device() {
+	[ ${1%[0-9]} = "wlan" ] && config_set "$1" phy "$1"
+	config_get phy "$1" phy
+	[ -z "$phy" ] && {
+		find_prism2_phy "$1" >/dev/null || return 0
+		config_get phy "$1" phy
+	}
+	[ "$phy" = "$dev" ] && found=1
+}
+
+detect_prism2() {
+	devidx=0
+	config_load wireless
+	while :; do
+		config_get type "radio$devidx" type
+		[ -n "$type" ] || break
+		devidx=$(($devidx + 1))
+	done
+	cd /proc/net/hostap
+	[ -d wlan* ] || return
+	for dev in $(ls -d wlan* 2>&-); do
+		found=0
+		config_foreach check_prism2_device wifi-device
+		[ "$found" -gt 0 ] && continue
+		cat <<EOF
+config wifi-device radio$devidx
+	option type	prism2
+	option channel  11
+	option macaddr	$(cat /sys/class/net/${dev}/address)
+
+	# REMOVE THIS LINE TO ENABLE WIFI:
+	option disabled 1
+
+config wifi-iface
+	option device	radio$devidx
+	option network	lan
+	option mode	ap
+	option ssid	OpenWrt
+	option encryption none
+
+EOF
+	devidx=$(($devidx + 1))
+	done
+}
diff --git a/package/kernel/hostap-driver/patches/001-fix-txpower.patch b/package/kernel/hostap-driver/patches/001-fix-txpower.patch
new file mode 100644
index 0000000..94ca344
--- /dev/null
+++ b/package/kernel/hostap-driver/patches/001-fix-txpower.patch
@@ -0,0 +1,175 @@
+diff -Naur hostap-driver-0.3.7/driver/modules/hostap.c hostap-driver-0.3.7-patched/driver/modules/hostap.c
+--- hostap-driver-0.3.7/driver/modules/hostap.c	2004-08-28 06:26:46.000000000 +0300
++++ hostap-driver-0.3.7-patched/driver/modules/hostap.c	2005-04-20 17:20:56.000000000 +0300
+@@ -1164,6 +1164,36 @@
+ 	return ret;
+ }
+ 
++/* BUG FIX: Restore power setting value when lost due to F/W bug */
++
++int hostap_restore_power(struct net_device *dev)
++{
++        struct hostap_interface *iface = dev->priv;
++       local_info_t *local = iface->local;
++               
++       u16 val;
++       int ret = 0;
++
++       if (local->txpower_type == PRISM2_TXPOWER_OFF) {
++                       val = 0xff; /* use all standby and sleep modes */
++                       ret = local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF,
++                                              HFA386X_CR_A_D_TEST_MODES2,
++                                              &val, NULL);
++       }
++
++#ifdef RAW_TXPOWER_SETTING
++       if (local->txpower_type == PRISM2_TXPOWER_FIXED) {
++               val = HFA384X_TEST_CFG_BIT_ALC;
++               local->func->cmd(dev, HFA384X_CMDCODE_TEST |
++                                (HFA384X_TEST_CFG_BITS << 8), 0, &val, NULL);
++               val = prism2_txpower_dBm_to_hfa386x(local->txpower);
++               ret = (local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF,
++                            HFA386X_CR_MANUAL_TX_POWER, &val, NULL));
++       }
++#endif /* RAW_TXPOWER_SETTING */
++       return (ret ? -EOPNOTSUPP : 0);
++}
++
+ 
+ struct proc_dir_entry *hostap_proc;
+ 
+@@ -1214,6 +1244,7 @@
+ EXPORT_SYMBOL(hostap_set_hostapd_sta);
+ EXPORT_SYMBOL(hostap_add_interface);
+ EXPORT_SYMBOL(hostap_remove_interface);
++EXPORT_SYMBOL(hostap_restore_power);
+ EXPORT_SYMBOL(prism2_update_comms_qual);
+ 
+ module_init(hostap_init);
+diff -Naur hostap-driver-0.3.7/driver/modules/hostap.h hostap-driver-0.3.7-patched/driver/modules/hostap.h
+--- hostap-driver-0.3.7/driver/modules/hostap.h	2003-11-30 04:14:26.000000000 +0200
++++ hostap-driver-0.3.7-patched/driver/modules/hostap.h	2005-04-20 17:21:23.000000000 +0300
+@@ -36,6 +36,7 @@
+ 					 const char *prefix, const char *name);
+ void hostap_remove_interface(struct net_device *dev, int rtnl_locked,
+ 			     int remove_from_list);
++int hostap_restore_power(struct net_device *dev);
+ int prism2_update_comms_qual(struct net_device *dev);
+ int prism2_sta_send_mgmt(local_info_t *local, u8 *dst, u8 stype,
+ 			 u8 *body, size_t bodylen);
+diff -Naur hostap-driver-0.3.7/driver/modules/hostap_ap.c hostap-driver-0.3.7-patched/driver/modules/hostap_ap.c
+--- hostap-driver-0.3.7/driver/modules/hostap_ap.c	2005-01-24 04:52:00.000000000 +0200
++++ hostap-driver-0.3.7-patched/driver/modules/hostap_ap.c	2005-04-21 20:06:12.000000000 +0300
+@@ -2346,13 +2346,13 @@
+ 		addr[count].sa_family = ARPHRD_ETHER;
+ 		memcpy(addr[count].sa_data, sta->addr, ETH_ALEN);
+ 		if (sta->last_rx_silence == 0)
+-			qual[count].qual = sta->last_rx_signal < 27 ?
+-				0 : (sta->last_rx_signal - 27) * 92 / 127;
++                        qual[count].qual = (sta->last_rx_signal - 156) == 0 ?
++                                0 : (sta->last_rx_signal - 156) * 92 / 64;
+ 		else
+-			qual[count].qual = sta->last_rx_signal -
+-				sta->last_rx_silence - 35;
+-		qual[count].level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal);
+-		qual[count].noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
++                        qual[count].qual = (sta->last_rx_signal -
++                                sta->last_rx_silence) * 92 / 64;
++                qual[count].level = sta->last_rx_signal;
++                qual[count].noise = sta->last_rx_silence;
+ 		qual[count].updated = sta->last_rx_updated;
+ 
+ 		sta->last_rx_updated = 0;
+@@ -2413,13 +2413,13 @@
+ 		memset(&iwe, 0, sizeof(iwe));
+ 		iwe.cmd = IWEVQUAL;
+ 		if (sta->last_rx_silence == 0)
+-			iwe.u.qual.qual = sta->last_rx_signal < 27 ?
+-				0 : (sta->last_rx_signal - 27) * 92 / 127;
++	                iwe.u.qual.qual = (sta->last_rx_signal -156) == 0 ?
++	                        0 : (sta->last_rx_signal - 156) * 92 / 64;
+ 		else
+-			iwe.u.qual.qual = sta->last_rx_signal -
+-				sta->last_rx_silence - 35;
+-		iwe.u.qual.level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal);
+-		iwe.u.qual.noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
++                        iwe.u.qual.qual = (sta->last_rx_signal -
++                                sta->last_rx_silence) * 92 / 64;
++                iwe.u.qual.level = sta->last_rx_signal;
++                iwe.u.qual.noise = sta->last_rx_silence;
+ 		iwe.u.qual.updated = sta->last_rx_updated;
+ 		iwe.len = IW_EV_QUAL_LEN;
+ 		current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
+diff -Naur hostap-driver-0.3.7/driver/modules/hostap_config.h hostap-driver-0.3.7-patched/driver/modules/hostap_config.h
+--- hostap-driver-0.3.7/driver/modules/hostap_config.h	2005-02-12 18:12:56.000000000 +0200
++++ hostap-driver-0.3.7-patched/driver/modules/hostap_config.h	2005-04-20 17:25:23.000000000 +0300
+@@ -94,6 +94,12 @@
+  */
+ /* #define PRISM2_NO_STATION_MODES */
+ 
++/* Enable TX power Setting functions
++ * (min att = -128 , max att =  127)
++ */
++
++#define RAW_TXPOWER_SETTING
++
+ /* Use Linux crypto API instead of own encryption implementation whenever
+  * possible. */
+ /* #define HOSTAP_USE_CRYPTO_API */
+diff -Naur hostap-driver-0.3.7/driver/modules/hostap_hw.c hostap-driver-0.3.7-patched/driver/modules/hostap_hw.c
+--- hostap-driver-0.3.7/driver/modules/hostap_hw.c	2005-02-05 09:20:09.000000000 +0200
++++ hostap-driver-0.3.7-patched/driver/modules/hostap_hw.c	2005-04-20 17:25:55.000000000 +0300
+@@ -1039,6 +1039,7 @@
+ 		       dev->name, local->fragm_threshold);
+ 	}
+ 
++	hostap_restore_power(dev);
+ 	return res;
+ }
+ 
+diff -Naur hostap-driver-0.3.7/driver/modules/hostap_info.c hostap-driver-0.3.7-patched/driver/modules/hostap_info.c
+--- hostap-driver-0.3.7/driver/modules/hostap_info.c	2004-02-29 20:05:44.000000000 +0200
++++ hostap-driver-0.3.7-patched/driver/modules/hostap_info.c	2005-04-20 17:26:36.000000000 +0300
+@@ -418,6 +418,11 @@
+ 	}
+ 
+ 	/* Get BSSID if we have a valid AP address */
++
++	if ( val == HFA384X_LINKSTATUS_CONNECTED ||
++	     val == HFA384X_LINKSTATUS_DISCONNECTED ) 
++			hostap_restore_power(local->dev);
++
+ 	if (connected) {
+ 		netif_carrier_on(local->dev);
+ 		netif_carrier_on(local->ddev);
+diff -Naur hostap-driver-0.3.7/driver/modules/hostap_ioctl.c hostap-driver-0.3.7-patched/driver/modules/hostap_ioctl.c
+--- hostap-driver-0.3.7/driver/modules/hostap_ioctl.c	2004-11-22 08:03:05.000000000 +0200
++++ hostap-driver-0.3.7-patched/driver/modules/hostap_ioctl.c	2005-04-20 17:42:41.000000000 +0300
+@@ -1453,23 +1453,20 @@
+ 		val = 255;
+ 
+ 	tmp = val;
+-	tmp >>= 2;
+ 
+-	return -12 - tmp;
++	return tmp;
+ }
+ 
+ static u16 prism2_txpower_dBm_to_hfa386x(int val)
+ {
+ 	signed char tmp;
+ 
+-	if (val > 20)
+-		return 128;
+-	else if (val < -43)
++	if (val > 127)
+ 		return 127;
++	else if (val < -128)
++		return 128;
+ 
+ 	tmp = val;
+-	tmp = -12 - tmp;
+-	tmp <<= 2;
+ 
+ 	return (unsigned char) tmp;
+ }