packages: clean up the package folder

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37007

1 files changed, 892 insertions, 0 deletions

diff --git a/package/kernel/switch/src/switch-robo.c b/package/kernel/switch/src/switch-robo.c
new file mode 100644
index 0000000..f715972
--- /dev/null
+++ b/package/kernel/switch/src/switch-robo.c
@@ -0,0 +1,892 @@
+/*
+ * Broadcom BCM5325E/536x switch configuration module
+ *
+ * Copyright (C) 2005 Felix Fietkau <nbd@nbd.name>
+ * Copyright (C) 2008 Michael Buesch <mb@bu3sch.de>
+ * Copyright (C) 2013 Hauke Mehrtens <hauke@hauke-m.de>
+ * Based on 'robocfg' by Oleg I. Vdovikin
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/if.h>
+#include <linux/if_arp.h>
+#include <linux/sockios.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <asm/uaccess.h>
+
+#include "switch-core.h"
+#include "etc53xx.h"
+
+#ifdef CONFIG_BCM47XX
+#include <bcm47xx_nvram.h>
+#endif
+
+#define DRIVER_NAME		"bcm53xx"
+#define DRIVER_VERSION		"0.03"
+#define PFX			"roboswitch: "
+
+#define ROBO_PHY_ADDR		0x1E	/* robo switch phy address */
+#define ROBO_PHY_ADDR_TG3	0x01	/* Tigon3 PHY address */
+#define ROBO_PHY_ADDR_BCM63XX	0x00	/* BCM63XX PHY address */
+
+/* MII registers */
+#define REG_MII_PAGE	0x10	/* MII Page register */
+#define REG_MII_ADDR	0x11	/* MII Address register */
+#define REG_MII_DATA0	0x18	/* MII Data register 0 */
+
+#define REG_MII_PAGE_ENABLE	1
+#define REG_MII_ADDR_WRITE	1
+#define REG_MII_ADDR_READ	2
+
+/* Robo device ID register (in ROBO_MGMT_PAGE) */
+#define ROBO_DEVICE_ID		0x30
+#define  ROBO_DEVICE_ID_5325	0x25 /* Faked */
+#define  ROBO_DEVICE_ID_5395	0x95
+#define  ROBO_DEVICE_ID_5397	0x97
+#define  ROBO_DEVICE_ID_5398	0x98
+#define  ROBO_DEVICE_ID_53115	0x3115
+#define  ROBO_DEVICE_ID_53125	0x3125
+
+/* Private et.o ioctls */
+#define SIOCGETCPHYRD           (SIOCDEVPRIVATE + 9)
+#define SIOCSETCPHYWR           (SIOCDEVPRIVATE + 10)
+
+/* Data structure for a Roboswitch device. */
+struct robo_switch {
+	char *device;			/* The device name string (ethX) */
+	u16 devid;			/* ROBO_DEVICE_ID_53xx */
+	bool is_5365;
+	bool gmii;			/* gigabit mii */
+	u8 corerev;
+	int gpio_robo_reset;
+	int gpio_lanports_enable;
+	struct ifreq ifr;
+	struct net_device *dev;
+	unsigned char port[9];
+};
+
+/* Currently we can only have one device in the system. */
+static struct robo_switch robo;
+
+
+static int do_ioctl(int cmd)
+{
+	mm_segment_t old_fs = get_fs();
+	int ret;
+
+	set_fs(KERNEL_DS);
+	ret = robo.dev->netdev_ops->ndo_do_ioctl(robo.dev, &robo.ifr, cmd);
+	set_fs(old_fs);
+
+	return ret;
+}
+
+static u16 mdio_read(__u16 phy_id, __u8 reg)
+{
+	struct mii_ioctl_data *mii = if_mii(&robo.ifr);
+	int err;
+
+	mii->phy_id = phy_id;
+	mii->reg_num = reg;
+
+	err = do_ioctl(SIOCGMIIREG);
+	if (err < 0) {
+		printk(KERN_ERR PFX "failed to read mdio reg %i with err %i.\n", reg, err);
+
+		return 0xffff;
+	}
+
+	return mii->val_out;
+}
+
+static void mdio_write(__u16 phy_id, __u8 reg, __u16 val)
+{
+	struct mii_ioctl_data *mii = if_mii(&robo.ifr);
+	int err;
+
+	mii->phy_id = phy_id;
+	mii->reg_num = reg;
+	mii->val_in = val;
+
+	err = do_ioctl(SIOCSMIIREG);
+	if (err < 0) {
+		printk(KERN_ERR PFX "failed to write mdio reg: %i with err %i.\n", reg, err);
+		return;
+	}
+}
+
+static int robo_reg(__u8 page, __u8 reg, __u8 op)
+{
+	int i = 3;
+
+	/* set page number */
+	mdio_write(ROBO_PHY_ADDR, REG_MII_PAGE,
+		(page << 8) | REG_MII_PAGE_ENABLE);
+
+	/* set register address */
+	mdio_write(ROBO_PHY_ADDR, REG_MII_ADDR,
+		(reg << 8) | op);
+
+	/* check if operation completed */
+	while (i--) {
+		if ((mdio_read(ROBO_PHY_ADDR, REG_MII_ADDR) & 3) == 0)
+			return 0;
+	}
+
+	printk(KERN_ERR PFX "timeout in robo_reg on page %i and reg %i with op %i.\n", page, reg, op);
+
+	return 1;
+}
+
+/*
+static void robo_read(__u8 page, __u8 reg, __u16 *val, int count)
+{
+	int i;
+
+	robo_reg(page, reg, REG_MII_ADDR_READ);
+
+	for (i = 0; i < count; i++)
+		val[i] = mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0 + i);
+}
+*/
+
+static __u16 robo_read16(__u8 page, __u8 reg)
+{
+	robo_reg(page, reg, REG_MII_ADDR_READ);
+
+	return mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0);
+}
+
+static __u32 robo_read32(__u8 page, __u8 reg)
+{
+	robo_reg(page, reg, REG_MII_ADDR_READ);
+
+	return mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0) |
+		(mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0 + 1) << 16);
+}
+
+static void robo_write16(__u8 page, __u8 reg, __u16 val16)
+{
+	/* write data */
+	mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0, val16);
+
+	robo_reg(page, reg, REG_MII_ADDR_WRITE);
+}
+
+static void robo_write32(__u8 page, __u8 reg, __u32 val32)
+{
+	/* write data */
+	mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0, val32 & 0xFFFF);
+	mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0 + 1, val32 >> 16);
+
+	robo_reg(page, reg, REG_MII_ADDR_WRITE);
+}
+
+/* checks that attached switch is 5365 */
+static bool robo_bcm5365(void)
+{
+	/* set vlan access id to 15 and read it back */
+	__u16 val16 = 15;
+	robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16);
+
+	/* 5365 will refuse this as it does not have this reg */
+	return robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS) != val16;
+}
+
+static bool robo_gmii(void)
+{
+	if (mdio_read(0, ROBO_MII_STAT) & 0x0100)
+		return ((mdio_read(0, 0x0f) & 0xf000) != 0);
+	return false;
+}
+
+static int robo_switch_enable(void)
+{
+	unsigned int i, last_port;
+	u16 val;
+#ifdef CONFIG_BCM47XX
+	char buf[20];
+#endif
+
+	val = robo_read16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE);
+	if (!(val & (1 << 1))) {
+		/* Unmanaged mode */
+		val &= ~(1 << 0);
+		/* With forwarding */
+		val |= (1 << 1);
+		robo_write16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE, val);
+		val = robo_read16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE);
+		if (!(val & (1 << 1))) {
+			printk(KERN_ERR PFX "Failed to enable switch\n");
+			return -EBUSY;
+		}
+
+		/* No spanning tree for unmanaged mode */
+		last_port = (robo.devid == ROBO_DEVICE_ID_5398) ?
+				ROBO_PORT7_CTRL : ROBO_PORT4_CTRL;
+		for (i = ROBO_PORT0_CTRL; i <= last_port; i++)
+			robo_write16(ROBO_CTRL_PAGE, i, 0);
+
+		/* No spanning tree on IMP port too */
+		robo_write16(ROBO_CTRL_PAGE, ROBO_IM_PORT_CTRL, 0);
+	}
+
+	if (robo.devid == ROBO_DEVICE_ID_53125) {
+		/* Make IM port status link by default */
+		val = robo_read16(ROBO_CTRL_PAGE, ROBO_PORT_OVERRIDE_CTRL) | 0xb1;
+		robo_write16(ROBO_CTRL_PAGE, ROBO_PORT_OVERRIDE_CTRL, val);
+		// TODO: init EEE feature
+	}
+
+#ifdef CONFIG_BCM47XX
+	/* WAN port LED, except for Netgear WGT634U */
+	if (bcm47xx_nvram_getenv("nvram_type", buf, sizeof(buf)) >= 0) {
+		if (strcmp(buf, "cfe") != 0)
+			robo_write16(ROBO_CTRL_PAGE, 0x16, 0x1F);
+	}
+#endif
+	return 0;
+}
+
+static void robo_switch_reset(void)
+{
+	if ((robo.devid == ROBO_DEVICE_ID_5395) ||
+	    (robo.devid == ROBO_DEVICE_ID_5397) ||
+	    (robo.devid == ROBO_DEVICE_ID_5398)) {
+		/* Trigger a software reset. */
+		robo_write16(ROBO_CTRL_PAGE, 0x79, 0x83);
+		mdelay(500);
+		robo_write16(ROBO_CTRL_PAGE, 0x79, 0);
+	}
+}
+
+#ifdef CONFIG_BCM47XX
+static int get_gpio_pin(const char *name)
+{
+	int i, err;
+	char nvram_var[10];
+	char buf[30];
+
+	for (i = 0; i < 16; i++) {
+		err = snprintf(nvram_var, sizeof(nvram_var), "gpio%i", i);
+		if (err <= 0)
+			continue;
+		err = bcm47xx_nvram_getenv(nvram_var, buf, sizeof(buf));
+		if (err <= 0)
+			continue;
+		if (!strcmp(name, buf))
+			return i;
+	}
+	return -1;
+}
+#endif
+
+static int robo_probe(char *devname)
+{
+	__u32 phyid;
+	unsigned int i;
+	int err = -1;
+	struct mii_ioctl_data *mii;
+
+	printk(KERN_INFO PFX "Probing device '%s'\n", devname);
+	strcpy(robo.ifr.ifr_name, devname);
+
+	if ((robo.dev = dev_get_by_name(&init_net, devname)) == NULL) {
+		printk(KERN_ERR PFX "No such device\n");
+		err = -ENODEV;
+		goto err_done;
+	}
+	if (!robo.dev->netdev_ops || !robo.dev->netdev_ops->ndo_do_ioctl) {
+		printk(KERN_ERR PFX "ndo_do_ioctl not implemented in ethernet driver\n");
+		err = -ENXIO;
+		goto err_put;
+	}
+
+	robo.device = devname;
+
+	/* try access using MII ioctls - get phy address */
+	err = do_ioctl(SIOCGMIIPHY);
+	if (err < 0) {
+		printk(KERN_ERR PFX "error (%i) while accessing MII phy registers with ioctls\n", err);
+		goto err_put;
+	}
+
+	/* got phy address check for robo address */
+	mii = if_mii(&robo.ifr);
+	if ((mii->phy_id != ROBO_PHY_ADDR) &&
+	    (mii->phy_id != ROBO_PHY_ADDR_BCM63XX) &&
+	    (mii->phy_id != ROBO_PHY_ADDR_TG3)) {
+		printk(KERN_ERR PFX "Invalid phy address (%d)\n", mii->phy_id);
+		err = -ENODEV;
+		goto err_put;
+	}
+
+#ifdef CONFIG_BCM47XX
+	robo.gpio_lanports_enable = get_gpio_pin("lanports_enable");
+	if (robo.gpio_lanports_enable >= 0) {
+		err = gpio_request(robo.gpio_lanports_enable, "lanports_enable");
+		if (err) {
+			printk(KERN_ERR PFX "error (%i) requesting lanports_enable gpio (%i)\n",
+			       err, robo.gpio_lanports_enable);
+			goto err_put;
+		}
+		gpio_direction_output(robo.gpio_lanports_enable, 1);
+		mdelay(5);
+	}
+
+	robo.gpio_robo_reset = get_gpio_pin("robo_reset");
+	if (robo.gpio_robo_reset >= 0) {
+		err = gpio_request(robo.gpio_robo_reset, "robo_reset");
+		if (err) {
+			printk(KERN_ERR PFX "error (%i) requesting robo_reset gpio (%i)\n",
+			       err, robo.gpio_robo_reset);
+			goto err_gpio_robo;
+		}
+		gpio_set_value(robo.gpio_robo_reset, 0);
+		gpio_direction_output(robo.gpio_robo_reset, 1);
+		gpio_set_value(robo.gpio_robo_reset, 0);
+		mdelay(50);
+
+		gpio_set_value(robo.gpio_robo_reset, 1);
+		mdelay(20);
+	} else {
+		// TODO: reset the internal robo switch
+	}
+#endif
+
+	phyid = mdio_read(ROBO_PHY_ADDR, 0x2) |
+		(mdio_read(ROBO_PHY_ADDR, 0x3) << 16);
+
+	if (phyid == 0xffffffff || phyid == 0x55210022) {
+		printk(KERN_ERR PFX "No Robo switch in managed mode found, phy_id = 0x%08x\n", phyid);
+		err = -ENODEV;
+		goto err_gpio_lanports;
+	}
+
+	/* Get the device ID */
+	for (i = 0; i < 10; i++) {
+		robo.devid = robo_read16(ROBO_MGMT_PAGE, ROBO_DEVICE_ID);
+		if (robo.devid)
+			break;
+		udelay(10);
+	}
+	if (!robo.devid)
+		robo.devid = ROBO_DEVICE_ID_5325; /* Fake it */
+	if (robo.devid == ROBO_DEVICE_ID_5325)
+		robo.is_5365 = robo_bcm5365();
+	else
+		robo.is_5365 = false;
+
+	robo.gmii = robo_gmii();
+	if (robo.devid == ROBO_DEVICE_ID_5325) {
+		for (i = 0; i < 5; i++)
+			robo.port[i] = i;
+	} else {
+		for (i = 0; i < 8; i++)
+			robo.port[i] = i;
+	}
+	robo.port[i] = ROBO_IM_PORT_CTRL;
+
+	robo_switch_reset();
+	err = robo_switch_enable();
+	if (err)
+		goto err_gpio_lanports;
+
+	printk(KERN_INFO PFX "found a 5%s%x!%s at %s\n", robo.devid & 0xff00 ? "" : "3", robo.devid,
+		robo.is_5365 ? " It's a BCM5365." : "", devname);
+
+	return 0;
+
+err_gpio_lanports:
+	if (robo.gpio_lanports_enable >= 0)
+		gpio_free(robo.gpio_lanports_enable);
+err_gpio_robo:
+	if (robo.gpio_robo_reset >= 0)
+		gpio_free(robo.gpio_robo_reset);
+err_put:
+	dev_put(robo.dev);
+	robo.dev = NULL;
+err_done:
+	return err;
+}
+
+static int handle_vlan_port_read_old(switch_driver *d, char *buf, int nr)
+{
+	__u16 val16;
+	int len = 0;
+	int j;
+
+	val16 = (nr) /* vlan */ | (0 << 12) /* read */ | (1 << 13) /* enable */;
+
+	if (robo.is_5365) {
+		robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5365, val16);
+		/* actual read */
+		val16 = robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_READ);
+		if ((val16 & (1 << 14)) /* valid */) {
+			for (j = 0; j < d->ports; j++) {
+				if (val16 & (1 << j)) {
+					len += sprintf(buf + len, "%d", j);
+					if (val16 & (1 << (j + 7))) {
+						if (j == d->cpuport)
+							buf[len++] = 'u';
+					} else {
+						buf[len++] = 't';
+						if (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1)) == nr)
+							buf[len++] = '*';
+					}
+					buf[len++] = '\t';
+				}
+			}
+			len += sprintf(buf + len, "\n");
+		}
+	} else {
+		u32 val32;
+		robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16);
+		/* actual read */
+		val32 = robo_read32(ROBO_VLAN_PAGE, ROBO_VLAN_READ);
+		if ((val32 & (1 << 20)) /* valid */) {
+			for (j = 0; j < d->ports; j++) {
+				if (val32 & (1 << j)) {
+					len += sprintf(buf + len, "%d", j);
+					if (val32 & (1 << (j + d->ports))) {
+						if (j == d->cpuport)
+							buf[len++] = 'u';
+					} else {
+						buf[len++] = 't';
+						if (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1)) == nr)
+							buf[len++] = '*';
+					}
+					buf[len++] = '\t';
+				}
+			}
+			len += sprintf(buf + len, "\n");
+		}
+	}
+
+	buf[len] = '\0';
+
+	return len;
+}
+
+static int handle_vlan_port_read_new(switch_driver *d, char *buf, int nr)
+{
+	__u8 vtbl_entry, vtbl_index, vtbl_access;
+	__u32 val32;
+	int len = 0;
+	int j;
+
+	if ((robo.devid == ROBO_DEVICE_ID_5395) ||
+	    (robo.devid == ROBO_DEVICE_ID_53115) ||
+	    (robo.devid == ROBO_DEVICE_ID_53125)) {
+		vtbl_access = ROBO_VTBL_ACCESS_5395;
+		vtbl_index = ROBO_VTBL_INDX_5395;
+		vtbl_entry = ROBO_VTBL_ENTRY_5395;
+	} else {
+		vtbl_access = ROBO_VTBL_ACCESS;
+		vtbl_index = ROBO_VTBL_INDX;
+		vtbl_entry = ROBO_VTBL_ENTRY;
+	}
+
+	robo_write16(ROBO_ARLIO_PAGE, vtbl_index, nr);
+	robo_write16(ROBO_ARLIO_PAGE, vtbl_access, (1 << 7) | (1 << 0));
+	val32 = robo_read32(ROBO_ARLIO_PAGE, vtbl_entry);
+	for (j = 0; j < d->ports; j++) {
+		if (val32 & (1 << j)) {
+			len += sprintf(buf + len, "%d", j);
+			if (val32 & (1 << (j + d->ports))) {
+				if (j == d->cpuport)
+					buf[len++] = 'u';
+			} else {
+				buf[len++] = 't';
+				if (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1)) == nr)
+					buf[len++] = '*';
+			}
+			buf[len++] = '\t';
+		}
+	}
+	len += sprintf(buf + len, "\n");
+	buf[len] = '\0';
+	return len;
+}
+
+static int handle_vlan_port_read(void *driver, char *buf, int nr)
+{
+	switch_driver *d = (switch_driver *) driver;
+
+	if (robo.devid != ROBO_DEVICE_ID_5325)
+		return handle_vlan_port_read_new(d, buf, nr);
+	else
+		return handle_vlan_port_read_old(d, buf, nr);
+}
+
+static void handle_vlan_port_write_old(switch_driver *d, switch_vlan_config *c, int nr)
+{
+	__u16 val16;
+	__u32 val32;
+	__u32 untag = ((c->untag  & ~(1 << d->cpuport)) << d->ports);
+
+	/* write config now */
+	val16 = (nr) /* vlan */ | (1 << 12) /* write */ | (1 << 13) /* enable */;
+	if (robo.is_5365) {
+		robo_write32(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE_5365,
+			(1 << 14)  /* valid */ | (untag << 1 ) | c->port);
+		robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5365, val16);
+	} else {
+		if (robo.corerev < 3)
+			val32 = (1 << 20) | ((nr >> 4) << 12) | untag | c->port;
+		else
+			val32 = (1 << 24) | (nr << 12) | untag | c->port;
+		robo_write32(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE, val32);
+		robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16);
+	}
+}
+
+static void handle_vlan_port_write_new(switch_driver *d, switch_vlan_config *c, int nr)
+{
+	__u8 vtbl_entry, vtbl_index, vtbl_access;
+	__u32 untag = ((c->untag  & ~(1 << d->cpuport)) << d->ports);
+
+	/* write config now */
+	if ((robo.devid == ROBO_DEVICE_ID_5395) ||
+	    (robo.devid == ROBO_DEVICE_ID_53115) ||
+	    (robo.devid == ROBO_DEVICE_ID_53125)) {
+		vtbl_access = ROBO_VTBL_ACCESS_5395;
+		vtbl_index = ROBO_VTBL_INDX_5395;
+		vtbl_entry = ROBO_VTBL_ENTRY_5395;
+	} else {
+		vtbl_access = ROBO_VTBL_ACCESS;
+		vtbl_index = ROBO_VTBL_INDX;
+		vtbl_entry = ROBO_VTBL_ENTRY;
+	}
+
+	robo_write32(ROBO_ARLIO_PAGE, vtbl_entry, untag | c->port);
+	robo_write16(ROBO_ARLIO_PAGE, vtbl_index, nr);
+	robo_write16(ROBO_ARLIO_PAGE, vtbl_access, 1 << 7);
+}
+
+static int handle_vlan_port_write(void *driver, char *buf, int nr)
+{
+	switch_driver *d = (switch_driver *)driver;
+	switch_vlan_config *c = switch_parse_vlan(d, buf);
+	int j;
+
+	if (c == NULL)
+		return -EINVAL;
+
+	for (j = 0; j < d->ports; j++) {
+		if ((c->untag | c->pvid) & (1 << j)) {
+			/* change default vlan tag */
+			robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1), nr);
+		}
+	}
+
+	if (robo.devid != ROBO_DEVICE_ID_5325)
+		handle_vlan_port_write_new(d, c, nr);
+	else
+		handle_vlan_port_write_old(d, c, nr);
+
+	kfree(c);
+	return 0;
+}
+
+#define set_switch(state) \
+	robo_write16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE, (robo_read16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE) & ~2) | (state ? 2 : 0));
+
+static int handle_enable_read(void *driver, char *buf, int nr)
+{
+	return sprintf(buf, "%d\n", (((robo_read16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE) & 2) == 2) ? 1 : 0));
+}
+
+static int handle_enable_write(void *driver, char *buf, int nr)
+{
+	set_switch(buf[0] == '1');
+
+	return 0;
+}
+
+static int handle_port_enable_read(void *driver, char *buf, int nr)
+{
+	return sprintf(buf, "%d\n", ((robo_read16(ROBO_CTRL_PAGE, robo.port[nr]) & 3) == 3 ? 0 : 1));
+}
+
+static int handle_port_enable_write(void *driver, char *buf, int nr)
+{
+	u16 val16;
+
+	if (buf[0] == '0')
+		val16 = 3; /* disabled */
+	else if (buf[0] == '1')
+		val16 = 0; /* enabled */
+	else
+		return -EINVAL;
+
+	robo_write16(ROBO_CTRL_PAGE, robo.port[nr],
+		(robo_read16(ROBO_CTRL_PAGE, robo.port[nr]) & ~3) | val16);
+
+	return 0;
+}
+
+static int handle_port_media_read(void *driver, char *buf, int nr)
+{
+	u16 bmcr = mdio_read(robo.port[nr], MII_BMCR);
+	int media, len;
+
+	if (bmcr & BMCR_ANENABLE)
+		media = SWITCH_MEDIA_AUTO;
+	else {
+		if (bmcr & BMCR_SPEED1000)
+			media = SWITCH_MEDIA_1000;
+		else if (bmcr & BMCR_SPEED100)
+			media = SWITCH_MEDIA_100;
+		else
+			media = 0;
+
+		if (bmcr & BMCR_FULLDPLX)
+			media |= SWITCH_MEDIA_FD;
+	}
+
+	len = switch_print_media(buf, media);
+	return len + sprintf(buf + len, "\n");
+}
+
+static int handle_port_media_write(void *driver, char *buf, int nr)
+{
+	int media = switch_parse_media(buf);
+	u16 bmcr, bmcr_mask;
+
+	if (media & SWITCH_MEDIA_AUTO)
+		bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
+	else {
+		if (media & SWITCH_MEDIA_1000) {
+			if (!robo.gmii)
+				return -EINVAL;
+			bmcr = BMCR_SPEED1000;
+		}
+		else if (media & SWITCH_MEDIA_100)
+			bmcr = BMCR_SPEED100;
+		else
+			bmcr = 0;
+
+		if (media & SWITCH_MEDIA_FD)
+			bmcr |= BMCR_FULLDPLX;
+	}
+
+	bmcr_mask = ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX | BMCR_ANENABLE | BMCR_ANRESTART);
+	mdio_write(robo.port[nr], MII_BMCR,
+		(mdio_read(robo.port[nr], MII_BMCR) & bmcr_mask) | bmcr);
+
+	return 0;
+}
+
+static int handle_enable_vlan_read(void *driver, char *buf, int nr)
+{
+	return sprintf(buf, "%d\n", (((robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0) & (1 << 7)) == (1 << 7)) ? 1 : 0));
+}
+
+static int handle_enable_vlan_write(void *driver, char *buf, int nr)
+{
+	__u16 val16;
+	int disable = ((buf[0] != '1') ? 1 : 0);
+
+	val16 = robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0);
+	robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0, disable ? 0 :
+		val16 | (1 << 7) /* 802.1Q VLAN */ | (3 << 5) /* mac check and hash */);
+
+	val16 = robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL1);
+	robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL1, disable ? 0 :
+		val16 | (robo.devid == ROBO_DEVICE_ID_5325 ? (1 << 1) :
+		0) | (1 << 2) | (1 << 3)); /* RSV multicast */
+
+	if (robo.devid != ROBO_DEVICE_ID_5325)
+		return 0;
+
+	robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL4, disable ? 0 :
+		(1 << 6) /* drop invalid VID frames */);
+	robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL5, disable ? 0 :
+		(1 << 3) /* drop miss V table frames */);
+
+	return 0;
+}
+
+static void handle_reset_old(switch_driver *d, char *buf, int nr)
+{
+	int j;
+	__u16 val16;
+
+	/* reset vlans */
+	for (j = 0; j <= ((robo.is_5365) ? VLAN_ID_MAX_5365 : VLAN_ID_MAX); j++) {
+		/* write config now */
+		val16 = (j) /* vlan */ | (1 << 12) /* write */ | (1 << 13) /* enable */;
+		if (robo.is_5365)
+			robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE_5365, 0);
+		else
+			robo_write32(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE, 0);
+		robo_write16(ROBO_VLAN_PAGE, robo.is_5365 ? ROBO_VLAN_TABLE_ACCESS_5365 :
+							    ROBO_VLAN_TABLE_ACCESS,
+			     val16);
+	}
+}
+
+static void handle_reset_new(switch_driver *d, char *buf, int nr)
+{
+	int j;
+	__u8 vtbl_entry, vtbl_index, vtbl_access;
+
+	if ((robo.devid == ROBO_DEVICE_ID_5395) ||
+	    (robo.devid == ROBO_DEVICE_ID_53115) ||
+	    (robo.devid == ROBO_DEVICE_ID_53125)) {
+		vtbl_access = ROBO_VTBL_ACCESS_5395;
+		vtbl_index = ROBO_VTBL_INDX_5395;
+		vtbl_entry = ROBO_VTBL_ENTRY_5395;
+	} else {
+		vtbl_access = ROBO_VTBL_ACCESS;
+		vtbl_index = ROBO_VTBL_INDX;
+		vtbl_entry = ROBO_VTBL_ENTRY;
+	}
+
+	for (j = 0; j <= VLAN_ID_MAX; j++) {
+		/* write config now */
+		robo_write32(ROBO_ARLIO_PAGE, vtbl_entry, 0);
+		robo_write16(ROBO_ARLIO_PAGE, vtbl_index, j);
+		robo_write16(ROBO_ARLIO_PAGE, vtbl_access, 1 << 7);
+	}
+}
+
+static int handle_reset(void *driver, char *buf, int nr)
+{
+	int j;
+	switch_driver *d = (switch_driver *) driver;
+
+	/* disable switching */
+	set_switch(0);
+
+	if (robo.devid != ROBO_DEVICE_ID_5325)
+		handle_reset_new(d, buf, nr);
+	else
+		handle_reset_old(d, buf, nr);
+
+	/* reset ports to a known good state */
+	for (j = 0; j < d->ports; j++) {
+		robo_write16(ROBO_CTRL_PAGE, robo.port[j], 0x0000);
+		robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1), 0);
+	}
+
+	/* enable switching */
+	set_switch(1);
+
+	/* enable vlans */
+	handle_enable_vlan_write(driver, "1", 0);
+
+	return 0;
+}
+
+static int __init robo_init(void)
+{
+	int notfound = 1;
+	char *device;
+
+	device = strdup("ethX");
+	for (device[3] = '0'; (device[3] <= '3') && notfound; device[3]++) {
+		if (! switch_device_registered (device))
+			notfound = robo_probe(device);
+	}
+	device[3]--;
+
+	if (notfound) {
+		kfree(device);
+		return -ENODEV;
+	} else {
+		static const switch_config cfg[] = {
+			{
+				.name	= "enable",
+				.read	= handle_enable_read,
+				.write	= handle_enable_write
+			}, {
+				.name	= "enable_vlan",
+				.read	= handle_enable_vlan_read,
+				.write	= handle_enable_vlan_write
+			}, {
+				.name	= "reset",
+				.read	= NULL,
+				.write	= handle_reset
+			}, { NULL, },
+		};
+		static const switch_config port[] = {
+			{
+				.name	= "enable",
+				.read	= handle_port_enable_read,
+				.write	= handle_port_enable_write
+			}, {
+				.name	= "media",
+				.read	= handle_port_media_read,
+				.write	= handle_port_media_write
+			}, { NULL, },
+		};
+		static const switch_config vlan[] = {
+			{
+				.name	= "ports",
+				.read	= handle_vlan_port_read,
+				.write	= handle_vlan_port_write
+			}, { NULL, },
+		};
+		switch_driver driver = {
+			.name			= DRIVER_NAME,
+			.version		= DRIVER_VERSION,
+			.interface		= device,
+			.cpuport		= 5,
+			.ports			= 6,
+			.vlans			= 16,
+			.driver_handlers	= cfg,
+			.port_handlers		= port,
+			.vlan_handlers		= vlan,
+		};
+		if (robo.devid != ROBO_DEVICE_ID_5325) {
+			driver.ports = 9;
+			driver.cpuport = 8;
+		}
+		if (robo.is_5365)
+			snprintf(driver.dev_name, SWITCH_NAME_BUFSZ, "BCM5365");
+		else
+			snprintf(driver.dev_name, SWITCH_NAME_BUFSZ, "BCM5%s%x", robo.devid & 0xff00 ? "" : "3", robo.devid);
+
+		return switch_register_driver(&driver);
+	}
+}
+
+static void __exit robo_exit(void)
+{
+	switch_unregister_driver(DRIVER_NAME);
+	if (robo.dev)
+		dev_put(robo.dev);
+	if (robo.gpio_robo_reset >= 0)
+		gpio_free(robo.gpio_robo_reset);
+	if (robo.gpio_lanports_enable >= 0)
+		gpio_free(robo.gpio_lanports_enable);
+	kfree(robo.device);
+}
+
+
+MODULE_AUTHOR("Felix Fietkau <openwrt@nbd.name>");
+MODULE_LICENSE("GPL");
+
+module_init(robo_init);
+module_exit(robo_exit);