diff options
author | Felix Fietkau <nbd@openwrt.org> | 2011-11-15 14:53:21 +0000 |
---|---|---|
committer | Felix Fietkau <nbd@openwrt.org> | 2011-11-15 14:53:21 +0000 |
commit | 817c72ef02d9c16b3a0021404aa9c6781382b74e (patch) | |
tree | 6646b976d56bc5a93431531cc4f0479351b53efb /package/mac80211/patches/561-ath9k_fix_ps_idle_handling.patch | |
parent | 215239a470a353cf6b9e39a13052af294f7e95c7 (diff) | |
download | mtk-20170518-817c72ef02d9c16b3a0021404aa9c6781382b74e.zip mtk-20170518-817c72ef02d9c16b3a0021404aa9c6781382b74e.tar.gz mtk-20170518-817c72ef02d9c16b3a0021404aa9c6781382b74e.tar.bz2 |
ath9k: reorganize patches, reset hardware after full sleep (fixes #10349)
SVN-Revision: 29155
Diffstat (limited to 'package/mac80211/patches/561-ath9k_fix_ps_idle_handling.patch')
-rw-r--r-- | package/mac80211/patches/561-ath9k_fix_ps_idle_handling.patch | 273 |
1 files changed, 273 insertions, 0 deletions
diff --git a/package/mac80211/patches/561-ath9k_fix_ps_idle_handling.patch b/package/mac80211/patches/561-ath9k_fix_ps_idle_handling.patch new file mode 100644 index 0000000..40f24e1 --- /dev/null +++ b/package/mac80211/patches/561-ath9k_fix_ps_idle_handling.patch @@ -0,0 +1,273 @@ +--- a/drivers/net/wireless/ath/ath9k/main.c ++++ b/drivers/net/wireless/ath/ath9k/main.c +@@ -883,82 +883,6 @@ chip_reset: + #undef SCHED_INTR + } + +-static void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw) +-{ +- struct ath_hw *ah = sc->sc_ah; +- struct ath_common *common = ath9k_hw_common(ah); +- struct ieee80211_channel *channel = hw->conf.channel; +- int r; +- +- ath9k_ps_wakeup(sc); +- spin_lock_bh(&sc->sc_pcu_lock); +- atomic_set(&ah->intr_ref_cnt, -1); +- +- ath9k_hw_configpcipowersave(ah, false); +- +- if (!ah->curchan) +- ah->curchan = ath9k_cmn_get_curchannel(sc->hw, ah); +- +- r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false); +- if (r) { +- ath_err(common, +- "Unable to reset channel (%u MHz), reset status %d\n", +- channel->center_freq, r); +- } +- +- ath_complete_reset(sc, true); +- +- /* Enable LED */ +- ath9k_hw_cfg_output(ah, ah->led_pin, +- AR_GPIO_OUTPUT_MUX_AS_OUTPUT); +- ath9k_hw_set_gpio(ah, ah->led_pin, 0); +- +- spin_unlock_bh(&sc->sc_pcu_lock); +- +- ath9k_ps_restore(sc); +-} +- +-void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw) +-{ +- struct ath_hw *ah = sc->sc_ah; +- struct ieee80211_channel *channel = hw->conf.channel; +- int r; +- +- ath9k_ps_wakeup(sc); +- +- ath_cancel_work(sc); +- +- spin_lock_bh(&sc->sc_pcu_lock); +- +- /* +- * Keep the LED on when the radio is disabled +- * during idle unassociated state. +- */ +- if (!sc->ps_idle) { +- ath9k_hw_set_gpio(ah, ah->led_pin, 1); +- ath9k_hw_cfg_gpio_input(ah, ah->led_pin); +- } +- +- ath_prepare_reset(sc, false, true); +- +- if (!ah->curchan) +- ah->curchan = ath9k_cmn_get_curchannel(hw, ah); +- +- r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false); +- if (r) { +- ath_err(ath9k_hw_common(sc->sc_ah), +- "Unable to reset channel (%u MHz), reset status %d\n", +- channel->center_freq, r); +- } +- +- ath9k_hw_phy_disable(ah); +- +- ath9k_hw_configpcipowersave(ah, true); +- +- spin_unlock_bh(&sc->sc_pcu_lock); +- ath9k_ps_restore(sc); +-} +- + static int ath_reset(struct ath_softc *sc, bool retry_tx) + { + int r; +@@ -1094,6 +1018,9 @@ static int ath9k_start(struct ieee80211_ + * and then setup of the interrupt mask. + */ + spin_lock_bh(&sc->sc_pcu_lock); ++ ++ atomic_set(&ah->intr_ref_cnt, -1); ++ + r = ath9k_hw_reset(ah, init_channel, ah->caldata, false); + if (r) { + ath_err(common, +@@ -1132,6 +1059,18 @@ static int ath9k_start(struct ieee80211_ + goto mutex_unlock; + } + ++ if (ah->led_pin >= 0) { ++ ath9k_hw_cfg_output(ah, ah->led_pin, ++ AR_GPIO_OUTPUT_MUX_AS_OUTPUT); ++ ath9k_hw_set_gpio(ah, ah->led_pin, 0); ++ } ++ ++ /* ++ * Reset key cache to sane defaults (all entries cleared) instead of ++ * semi-random values after suspend/resume. ++ */ ++ ath9k_cmn_init_crypto(sc->sc_ah); ++ + spin_unlock_bh(&sc->sc_pcu_lock); + + if ((ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE) && +@@ -1229,6 +1168,7 @@ static void ath9k_stop(struct ieee80211_ + struct ath_softc *sc = hw->priv; + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); ++ bool prev_idle; + + mutex_lock(&sc->mutex); + +@@ -1258,35 +1198,45 @@ static void ath9k_stop(struct ieee80211_ + * before setting the invalid flag. */ + ath9k_hw_disable_interrupts(ah); + +- if (!(sc->sc_flags & SC_OP_INVALID)) { +- ath_drain_all_txq(sc, false); +- ath_stoprecv(sc); +- ath9k_hw_phy_disable(ah); +- } else +- sc->rx.rxlink = NULL; ++ spin_unlock_bh(&sc->sc_pcu_lock); ++ ++ /* we can now sync irq and kill any running tasklets, since we already ++ * disabled interrupts and not holding a spin lock */ ++ synchronize_irq(sc->irq); ++ tasklet_kill(&sc->intr_tq); ++ tasklet_kill(&sc->bcon_tasklet); ++ ++ prev_idle = sc->ps_idle; ++ sc->ps_idle = true; ++ ++ spin_lock_bh(&sc->sc_pcu_lock); ++ ++ if (ah->led_pin >= 0) { ++ ath9k_hw_set_gpio(ah, ah->led_pin, 1); ++ ath9k_hw_cfg_gpio_input(ah, ah->led_pin); ++ } ++ ++ ath_prepare_reset(sc, false, true); + + if (sc->rx.frag) { + dev_kfree_skb_any(sc->rx.frag); + sc->rx.frag = NULL; + } + +- /* disable HAL and put h/w to sleep */ +- ath9k_hw_disable(ah); ++ if (!ah->curchan) ++ ah->curchan = ath9k_cmn_get_curchannel(hw, ah); + +- spin_unlock_bh(&sc->sc_pcu_lock); ++ ath9k_hw_reset(ah, ah->curchan, ah->caldata, false); ++ ath9k_hw_phy_disable(ah); + +- /* we can now sync irq and kill any running tasklets, since we already +- * disabled interrupts and not holding a spin lock */ +- synchronize_irq(sc->irq); +- tasklet_kill(&sc->intr_tq); +- tasklet_kill(&sc->bcon_tasklet); ++ ath9k_hw_configpcipowersave(ah, true); + +- ath9k_ps_restore(sc); ++ spin_unlock_bh(&sc->sc_pcu_lock); + +- sc->ps_idle = true; +- ath_radio_disable(sc, hw); ++ ath9k_ps_restore(sc); + + sc->sc_flags |= SC_OP_INVALID; ++ sc->ps_idle = prev_idle; + + mutex_unlock(&sc->mutex); + +@@ -1608,8 +1558,8 @@ static int ath9k_config(struct ieee80211 + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); + struct ieee80211_conf *conf = &hw->conf; +- bool disable_radio = false; + ++ ath9k_ps_wakeup(sc); + mutex_lock(&sc->mutex); + + /* +@@ -1618,16 +1568,8 @@ static int ath9k_config(struct ieee80211 + * of the changes. Likewise we must only disable the radio towards + * the end. + */ +- if (changed & IEEE80211_CONF_CHANGE_IDLE) { ++ if (changed & IEEE80211_CONF_CHANGE_IDLE) + sc->ps_idle = !!(conf->flags & IEEE80211_CONF_IDLE); +- if (!sc->ps_idle) { +- ath_radio_enable(sc, hw); +- ath_dbg(common, ATH_DBG_CONFIG, +- "not-idle: enabling radio\n"); +- } else { +- disable_radio = true; +- } +- } + + /* + * We just prepare to enable PS. We have to wait until our AP has +@@ -1752,19 +1694,13 @@ static int ath9k_config(struct ieee80211 + ath_dbg(common, ATH_DBG_CONFIG, + "Set power: %d\n", conf->power_level); + sc->config.txpowlimit = 2 * conf->power_level; +- ath9k_ps_wakeup(sc); + ath9k_cmn_update_txpow(ah, sc->curtxpow, + sc->config.txpowlimit, &sc->curtxpow); +- ath9k_ps_restore(sc); + conf->cur_power_level = sc->curtxpow / 2; + } + +- if (disable_radio) { +- ath_dbg(common, ATH_DBG_CONFIG, "idle: disabling radio\n"); +- ath_radio_disable(sc, hw); +- } +- + mutex_unlock(&sc->mutex); ++ ath9k_ps_restore(sc); + + return 0; + } +--- a/drivers/net/wireless/ath/ath9k/pci.c ++++ b/drivers/net/wireless/ath/ath9k/pci.c +@@ -306,12 +306,11 @@ static int ath_pci_suspend(struct device + struct ieee80211_hw *hw = pci_get_drvdata(pdev); + struct ath_softc *sc = hw->priv; + +- ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1); +- + /* The device has to be moved to FULLSLEEP forcibly. + * Otherwise the chip never moved to full sleep, + * when no interface is up. + */ ++ ath9k_hw_disable(sc->sc_ah); + ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP); + + return 0; +@@ -333,22 +332,6 @@ static int ath_pci_resume(struct device + if ((val & 0x0000ff00) != 0) + pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); + +- ath9k_ps_wakeup(sc); +- /* Enable LED */ +- ath9k_hw_cfg_output(sc->sc_ah, sc->sc_ah->led_pin, +- AR_GPIO_OUTPUT_MUX_AS_OUTPUT); +- ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 0); +- +- /* +- * Reset key cache to sane defaults (all entries cleared) instead of +- * semi-random values after suspend/resume. +- */ +- ath9k_cmn_init_crypto(sc->sc_ah); +- ath9k_ps_restore(sc); +- +- sc->ps_idle = true; +- ath_radio_disable(sc, hw); +- + return 0; + } + |