mac80211: oops, add missing patches

SVN-Revision: 13926

3 files changed, 900 insertions, 0 deletions

diff --git a/package/mac80211/patches/403-ath9k-introduce-bus-specific-cache-size-routine.patch b/package/mac80211/patches/403-ath9k-introduce-bus-specific-cache-size-routine.patch
new file mode 100644
index 0000000..4fd49691
--- /dev/null
+++ b/package/mac80211/patches/403-ath9k-introduce-bus-specific-cache-size-routine.patch
@@ -0,0 +1,85 @@
+From 1306e6b6d72b2bc0b91bcdd15b1d982965210bda Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 5 Jan 2009 10:57:42 +0100
+Subject: [PATCH 03/11] ath9k: introduce bus specific cache size routine
+
+The PCI specific bus_read_cachesize routine won't work on the AHB bus,
+we have to replace it with a suitable one later.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+---
+ drivers/net/wireless/ath9k/core.h |   10 ++++++++++
+ drivers/net/wireless/ath9k/main.c |    9 +++++++--
+ 2 files changed, 17 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/wireless/ath9k/core.h
++++ b/drivers/net/wireless/ath9k/core.h
+@@ -693,6 +693,10 @@ enum PROT_MODE {
+ #define SC_OP_RFKILL_SW_BLOCKED	BIT(12)
+ #define SC_OP_RFKILL_HW_BLOCKED	BIT(13)
+ 
++struct ath_bus_ops {
++	void		(*read_cachesize)(struct ath_softc *sc, int *csz);
++};
++
+ struct ath_softc {
+ 	struct ieee80211_hw *hw;
+ 	struct device *dev;
+@@ -743,6 +747,7 @@ struct ath_softc {
+ #ifdef CONFIG_ATH9K_DEBUG
+ 	struct ath9k_debug sc_debug;
+ #endif
++	struct ath_bus_ops *bus_ops;
+ };
+ 
+ int ath_reset(struct ath_softc *sc, bool retry_tx);
+@@ -750,4 +755,9 @@ int ath_get_hal_qnum(u16 queue, struct a
+ int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc);
+ int ath_cabq_update(struct ath_softc *);
+ 
++static inline void ath_read_cachesize(struct ath_softc *sc, int *csz)
++{
++	sc->bus_ops->read_cachesize(sc, csz);
++}
++
+ #endif /* CORE_H */
+--- a/drivers/net/wireless/ath9k/main.c
++++ b/drivers/net/wireless/ath9k/main.c
+@@ -42,7 +42,7 @@ static void ath_detach(struct ath_softc 
+ 
+ /* return bus cachesize in 4B word units */
+ 
+-static void bus_read_cachesize(struct ath_softc *sc, int *csz)
++static void ath_pci_read_cachesize(struct ath_softc *sc, int *csz)
+ {
+ 	u8 u8tmp;
+ 
+@@ -1338,7 +1338,7 @@ static int ath_init(u16 devid, struct at
+ 	 * Cache line size is used to size and align various
+ 	 * structures used to communicate with the hardware.
+ 	 */
+-	bus_read_cachesize(sc, &csz);
++	ath_read_cachesize(sc, &csz);
+ 	/* XXX assert csz is non-zero */
+ 	sc->sc_cachelsz = csz << 2;	/* convert to bytes */
+ 
+@@ -2529,6 +2529,10 @@ ath_rf_name(u16 rf_version)
+ 	return "????";
+ }
+ 
++static struct ath_bus_ops ath_pci_bus_ops = {
++	.read_cachesize = ath_pci_read_cachesize,
++};
++
+ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+ {
+ 	void __iomem *mem;
+@@ -2617,6 +2621,7 @@ static int ath_pci_probe(struct pci_dev 
+ 	sc->hw = hw;
+ 	sc->dev = &pdev->dev;
+ 	sc->mem = mem;
++	sc->bus_ops = &ath_pci_bus_ops;
+ 
+ 	if (ath_attach(id->device, sc) != 0) {
+ 		ret = -ENODEV;
diff --git a/package/mac80211/patches/404-ath9k-introduce-bus-specific-cleanup-routine.patch b/package/mac80211/patches/404-ath9k-introduce-bus-specific-cleanup-routine.patch
new file mode 100644
index 0000000..d1b2f3c
--- /dev/null
+++ b/package/mac80211/patches/404-ath9k-introduce-bus-specific-cleanup-routine.patch
@@ -0,0 +1,90 @@
+From 4167fb37cceda6a5ebfbfc4431abc69a1857ce43 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 5 Jan 2009 10:59:29 +0100
+Subject: [PATCH 04/11] ath9k: introduce bus specific cleanup routine
+
+We have left only some PCI specific cleanup code. We have to convert
+them as well.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+---
+ drivers/net/wireless/ath9k/core.h |    6 ++++++
+ drivers/net/wireless/ath9k/main.c |   30 ++++++++++++++++--------------
+ 2 files changed, 22 insertions(+), 14 deletions(-)
+
+--- a/drivers/net/wireless/ath9k/core.h
++++ b/drivers/net/wireless/ath9k/core.h
+@@ -695,6 +695,7 @@ enum PROT_MODE {
+ 
+ struct ath_bus_ops {
+ 	void		(*read_cachesize)(struct ath_softc *sc, int *csz);
++	void		(*cleanup)(struct ath_softc *sc);
+ };
+ 
+ struct ath_softc {
+@@ -760,4 +761,9 @@ static inline void ath_read_cachesize(st
+ 	sc->bus_ops->read_cachesize(sc, csz);
+ }
+ 
++static inline void ath_bus_cleanup(struct ath_softc *sc)
++{
++	sc->bus_ops->cleanup(sc);
++}
++
+ #endif /* CORE_H */
+--- a/drivers/net/wireless/ath9k/main.c
++++ b/drivers/net/wireless/ath9k/main.c
+@@ -1267,13 +1267,7 @@ static int ath_start_rfkill_poll(struct 
+ 			rfkill_free(sc->rf_kill.rfkill);
+ 
+ 			/* Deinitialize the device */
+-			ath_detach(sc);
+-			if (to_pci_dev(sc->dev)->irq)
+-				free_irq(to_pci_dev(sc->dev)->irq, sc);
+-			pci_iounmap(to_pci_dev(sc->dev), sc->mem);
+-			pci_release_region(to_pci_dev(sc->dev), 0);
+-			pci_disable_device(to_pci_dev(sc->dev));
+-			ieee80211_free_hw(sc->hw);
++			ath_bus_cleanup(sc);
+ 			return -EIO;
+ 		} else {
+ 			sc->sc_flags |= SC_OP_RFKILL_REGISTERED;
+@@ -2529,8 +2523,22 @@ ath_rf_name(u16 rf_version)
+ 	return "????";
+ }
+ 
++static void ath_pci_cleanup(struct ath_softc *sc)
++{
++	struct pci_dev *pdev = to_pci_dev(sc->dev);
++
++	ath_detach(sc);
++	if (pdev->irq)
++		free_irq(pdev->irq, sc);
++	pci_iounmap(pdev, sc->mem);
++	pci_release_region(pdev, 0);
++	pci_disable_device(pdev);
++	ieee80211_free_hw(sc->hw);
++}
++
+ static struct ath_bus_ops ath_pci_bus_ops = {
+ 	.read_cachesize = ath_pci_read_cachesize,
++	.cleanup = ath_pci_cleanup,
+ };
+ 
+ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+@@ -2667,13 +2675,7 @@ static void ath_pci_remove(struct pci_de
+ 	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+ 	struct ath_softc *sc = hw->priv;
+ 
+-	ath_detach(sc);
+-	if (pdev->irq)
+-		free_irq(pdev->irq, sc);
+-	pci_iounmap(pdev, sc->mem);
+-	pci_release_region(pdev, 0);
+-	pci_disable_device(pdev);
+-	ieee80211_free_hw(hw);
++	ath_pci_cleanup(sc);
+ }
+ 
+ #ifdef CONFIG_PM
diff --git a/package/mac80211/patches/405-ath9k-move-PCI-code-into-separate-file.patch b/package/mac80211/patches/405-ath9k-move-PCI-code-into-separate-file.patch
new file mode 100644
index 0000000..0cdf4da
--- /dev/null
+++ b/package/mac80211/patches/405-ath9k-move-PCI-code-into-separate-file.patch
@@ -0,0 +1,725 @@
+From d95e670cd1395ffd8410bed809b6d060f2183d6b Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 5 Jan 2009 11:01:09 +0100
+Subject: [PATCH 05/11] ath9k: move PCI code into separate file
+
+Now that we have converted all bus specific routines to replaceable, we
+can move the PCI specific codes into a separate file.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+---
+ drivers/net/wireless/ath9k/Makefile |    1 +
+ drivers/net/wireless/ath9k/core.h   |   18 ++-
+ drivers/net/wireless/ath9k/main.c   |  299 +++--------------------------------
+ drivers/net/wireless/ath9k/pci.c    |  289 +++++++++++++++++++++++++++++++++
+ 4 files changed, 328 insertions(+), 279 deletions(-)
+
+--- a/drivers/net/wireless/ath9k/Makefile
++++ b/drivers/net/wireless/ath9k/Makefile
+@@ -11,6 +11,7 @@ ath9k-y +=	hw.o \
+ 		xmit.o \
+ 		rc.o
+ 
++ath9k-$(CONFIG_PCI) += pci.o
+ ath9k-$(CONFIG_ATH9K_DEBUG) += debug.o
+ 
+ obj-$(CONFIG_ATH9K) += ath9k.o
+--- a/drivers/net/wireless/ath9k/core.h
++++ b/drivers/net/wireless/ath9k/core.h
+@@ -18,7 +18,7 @@
+ #define CORE_H
+ 
+ #include <linux/etherdevice.h>
+-#include <linux/pci.h>
++#include <linux/device.h>
+ #include <net/mac80211.h>
+ #include <linux/leds.h>
+ #include <linux/rfkill.h>
+@@ -766,4 +766,20 @@ static inline void ath_bus_cleanup(struc
+ 	sc->bus_ops->cleanup(sc);
+ }
+ 
++extern struct ieee80211_ops ath9k_ops;
++
++irqreturn_t ath_isr(int irq, void *dev);
++int ath_attach(u16 devid, struct ath_softc *sc);
++void ath_detach(struct ath_softc *sc);
++const char *ath_mac_bb_name(u32 mac_bb_version);
++const char *ath_rf_name(u16 rf_version);
++
++#ifdef CONFIG_PCI
++int ath_pci_init(void);
++void ath_pci_exit(void);
++#else
++static inline int ath_pci_init(void) { return 0; };
++static inline void ath_pci_exit(void) {};
++#endif
++
+ #endif /* CORE_H */
+--- a/drivers/net/wireless/ath9k/main.c
++++ b/drivers/net/wireless/ath9k/main.c
+@@ -28,38 +28,6 @@ MODULE_DESCRIPTION("Support for Atheros 
+ MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards");
+ MODULE_LICENSE("Dual BSD/GPL");
+ 
+-static struct pci_device_id ath_pci_id_table[] __devinitdata = {
+-	{ PCI_VDEVICE(ATHEROS, 0x0023) }, /* PCI   */
+-	{ PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
+-	{ PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI   */
+-	{ PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI   */
+-	{ PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
+-	{ PCI_VDEVICE(ATHEROS, 0x002B) }, /* PCI-E */
+-	{ 0 }
+-};
+-
+-static void ath_detach(struct ath_softc *sc);
+-
+-/* return bus cachesize in 4B word units */
+-
+-static void ath_pci_read_cachesize(struct ath_softc *sc, int *csz)
+-{
+-	u8 u8tmp;
+-
+-	pci_read_config_byte(to_pci_dev(sc->dev), PCI_CACHE_LINE_SIZE,
+-			     (u8 *)&u8tmp);
+-	*csz = (int)u8tmp;
+-
+-	/*
+-	 * This check was put in to avoid "unplesant" consequences if
+-	 * the bootrom has not fully initialized all PCI devices.
+-	 * Sometimes the cache line size register is not set
+-	 */
+-
+-	if (*csz == 0)
+-		*csz = DEFAULT_CACHELINE >> 2;   /* Use the default size */
+-}
+-
+ static void ath_cache_conf_rate(struct ath_softc *sc,
+ 				struct ieee80211_conf *conf)
+ {
+@@ -497,7 +465,7 @@ static void ath9k_tasklet(unsigned long 
+ 	ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask);
+ }
+ 
+-static irqreturn_t ath_isr(int irq, void *dev)
++irqreturn_t ath_isr(int irq, void *dev)
+ {
+ 	struct ath_softc *sc = dev;
+ 	struct ath_hal *ah = sc->sc_ah;
+@@ -1278,7 +1246,7 @@ static int ath_start_rfkill_poll(struct 
+ }
+ #endif /* CONFIG_RFKILL */
+ 
+-static void ath_detach(struct ath_softc *sc)
++void ath_detach(struct ath_softc *sc)
+ {
+ 	struct ieee80211_hw *hw = sc->hw;
+ 	int i = 0;
+@@ -1529,7 +1497,7 @@ bad:
+ 	return error;
+ }
+ 
+-static int ath_attach(u16 devid, struct ath_softc *sc)
++int ath_attach(u16 devid, struct ath_softc *sc)
+ {
+ 	struct ieee80211_hw *hw = sc->hw;
+ 	int error = 0;
+@@ -2448,7 +2416,7 @@ static int ath9k_ampdu_action(struct iee
+ 	return ret;
+ }
+ 
+-static struct ieee80211_ops ath9k_ops = {
++struct ieee80211_ops ath9k_ops = {
+ 	.tx 		    = ath9k_tx,
+ 	.start 		    = ath9k_start,
+ 	.stop 		    = ath9k_stop,
+@@ -2492,7 +2460,7 @@ static struct {
+ /*
+  * Return the MAC/BB name. "????" is returned if the MAC/BB is unknown.
+  */
+-static const char *
++const char *
+ ath_mac_bb_name(u32 mac_bb_version)
+ {
+ 	int i;
+@@ -2509,7 +2477,7 @@ ath_mac_bb_name(u32 mac_bb_version)
+ /*
+  * Return the RF name. "????" is returned if the RF is unknown.
+  */
+-static const char *
++const char *
+ ath_rf_name(u16 rf_version)
+ {
+ 	int i;
+@@ -2523,236 +2491,7 @@ ath_rf_name(u16 rf_version)
+ 	return "????";
+ }
+ 
+-static void ath_pci_cleanup(struct ath_softc *sc)
+-{
+-	struct pci_dev *pdev = to_pci_dev(sc->dev);
+-
+-	ath_detach(sc);
+-	if (pdev->irq)
+-		free_irq(pdev->irq, sc);
+-	pci_iounmap(pdev, sc->mem);
+-	pci_release_region(pdev, 0);
+-	pci_disable_device(pdev);
+-	ieee80211_free_hw(sc->hw);
+-}
+-
+-static struct ath_bus_ops ath_pci_bus_ops = {
+-	.read_cachesize = ath_pci_read_cachesize,
+-	.cleanup = ath_pci_cleanup,
+-};
+-
+-static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+-{
+-	void __iomem *mem;
+-	struct ath_softc *sc;
+-	struct ieee80211_hw *hw;
+-	u8 csz;
+-	u32 val;
+-	int ret = 0;
+-	struct ath_hal *ah;
+-
+-	if (pci_enable_device(pdev))
+-		return -EIO;
+-
+-	ret =  pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+-
+-	if (ret) {
+-		printk(KERN_ERR "ath9k: 32-bit DMA not available\n");
+-		goto bad;
+-	}
+-
+-	ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+-
+-	if (ret) {
+-		printk(KERN_ERR "ath9k: 32-bit DMA consistent "
+-			"DMA enable failed\n");
+-		goto bad;
+-	}
+-
+-	/*
+-	 * Cache line size is used to size and align various
+-	 * structures used to communicate with the hardware.
+-	 */
+-	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
+-	if (csz == 0) {
+-		/*
+-		 * Linux 2.4.18 (at least) writes the cache line size
+-		 * register as a 16-bit wide register which is wrong.
+-		 * We must have this setup properly for rx buffer
+-		 * DMA to work so force a reasonable value here if it
+-		 * comes up zero.
+-		 */
+-		csz = L1_CACHE_BYTES / sizeof(u32);
+-		pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
+-	}
+-	/*
+-	 * The default setting of latency timer yields poor results,
+-	 * set it to the value used by other systems. It may be worth
+-	 * tweaking this setting more.
+-	 */
+-	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
+-
+-	pci_set_master(pdev);
+-
+-	/*
+-	 * Disable the RETRY_TIMEOUT register (0x41) to keep
+-	 * PCI Tx retries from interfering with C3 CPU state.
+-	 */
+-	pci_read_config_dword(pdev, 0x40, &val);
+-	if ((val & 0x0000ff00) != 0)
+-		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+-
+-	ret = pci_request_region(pdev, 0, "ath9k");
+-	if (ret) {
+-		dev_err(&pdev->dev, "PCI memory region reserve error\n");
+-		ret = -ENODEV;
+-		goto bad;
+-	}
+-
+-	mem = pci_iomap(pdev, 0, 0);
+-	if (!mem) {
+-		printk(KERN_ERR "PCI memory map error\n") ;
+-		ret = -EIO;
+-		goto bad1;
+-	}
+-
+-	hw = ieee80211_alloc_hw(sizeof(struct ath_softc), &ath9k_ops);
+-	if (hw == NULL) {
+-		printk(KERN_ERR "ath_pci: no memory for ieee80211_hw\n");
+-		goto bad2;
+-	}
+-
+-	SET_IEEE80211_DEV(hw, &pdev->dev);
+-	pci_set_drvdata(pdev, hw);
+-
+-	sc = hw->priv;
+-	sc->hw = hw;
+-	sc->dev = &pdev->dev;
+-	sc->mem = mem;
+-	sc->bus_ops = &ath_pci_bus_ops;
+-
+-	if (ath_attach(id->device, sc) != 0) {
+-		ret = -ENODEV;
+-		goto bad3;
+-	}
+-
+-	/* setup interrupt service routine */
+-
+-	if (request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath", sc)) {
+-		printk(KERN_ERR "%s: request_irq failed\n",
+-			wiphy_name(hw->wiphy));
+-		ret = -EIO;
+-		goto bad4;
+-	}
+-
+-	ah = sc->sc_ah;
+-	printk(KERN_INFO
+-	       "%s: Atheros AR%s MAC/BB Rev:%x "
+-	       "AR%s RF Rev:%x: mem=0x%lx, irq=%d\n",
+-	       wiphy_name(hw->wiphy),
+-	       ath_mac_bb_name(ah->ah_macVersion),
+-	       ah->ah_macRev,
+-	       ath_rf_name((ah->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR)),
+-	       ah->ah_phyRev,
+-	       (unsigned long)mem, pdev->irq);
+-
+-	return 0;
+-bad4:
+-	ath_detach(sc);
+-bad3:
+-	ieee80211_free_hw(hw);
+-bad2:
+-	pci_iounmap(pdev, mem);
+-bad1:
+-	pci_release_region(pdev, 0);
+-bad:
+-	pci_disable_device(pdev);
+-	return ret;
+-}
+-
+-static void ath_pci_remove(struct pci_dev *pdev)
+-{
+-	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+-	struct ath_softc *sc = hw->priv;
+-
+-	ath_pci_cleanup(sc);
+-}
+-
+-#ifdef CONFIG_PM
+-
+-static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+-{
+-	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+-	struct ath_softc *sc = hw->priv;
+-
+-	ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
+-
+-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
+-	if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
+-		cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll);
+-#endif
+-
+-	pci_save_state(pdev);
+-	pci_disable_device(pdev);
+-	pci_set_power_state(pdev, 3);
+-
+-	return 0;
+-}
+-
+-static int ath_pci_resume(struct pci_dev *pdev)
+-{
+-	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+-	struct ath_softc *sc = hw->priv;
+-	u32 val;
+-	int err;
+-
+-	err = pci_enable_device(pdev);
+-	if (err)
+-		return err;
+-	pci_restore_state(pdev);
+-	/*
+-	 * Suspend/Resume resets the PCI configuration space, so we have to
+-	 * re-disable the RETRY_TIMEOUT register (0x41) to keep
+-	 * PCI Tx retries from interfering with C3 CPU state
+-	 */
+-	pci_read_config_dword(pdev, 0x40, &val);
+-	if ((val & 0x0000ff00) != 0)
+-		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+-
+-	/* Enable LED */
+-	ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
+-			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+-	ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
+-
+-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
+-	/*
+-	 * check the h/w rfkill state on resume
+-	 * and start the rfkill poll timer
+-	 */
+-	if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
+-		queue_delayed_work(sc->hw->workqueue,
+-				   &sc->rf_kill.rfkill_poll, 0);
+-#endif
+-
+-	return 0;
+-}
+-
+-#endif /* CONFIG_PM */
+-
+-MODULE_DEVICE_TABLE(pci, ath_pci_id_table);
+-
+-static struct pci_driver ath_pci_driver = {
+-	.name       = "ath9k",
+-	.id_table   = ath_pci_id_table,
+-	.probe      = ath_pci_probe,
+-	.remove     = ath_pci_remove,
+-#ifdef CONFIG_PM
+-	.suspend    = ath_pci_suspend,
+-	.resume     = ath_pci_resume,
+-#endif /* CONFIG_PM */
+-};
+-
+-static int __init init_ath_pci(void)
++static int __init ath9k_init(void)
+ {
+ 	int error;
+ 
+@@ -2764,26 +2503,30 @@ static int __init init_ath_pci(void)
+ 		printk(KERN_ERR
+ 			"Unable to register rate control algorithm: %d\n",
+ 			error);
+-		ath_rate_control_unregister();
+-		return error;
++		goto err_out;
+ 	}
+ 
+-	if (pci_register_driver(&ath_pci_driver) < 0) {
++	error = ath_pci_init();
++	if (error < 0) {
+ 		printk(KERN_ERR
+ 			"ath_pci: No devices found, driver not installed.\n");
+-		ath_rate_control_unregister();
+-		pci_unregister_driver(&ath_pci_driver);
+-		return -ENODEV;
++		error = -ENODEV;
++		goto err_rate_unregister;
+ 	}
+ 
+ 	return 0;
++
++ err_rate_unregister:
++	ath_rate_control_unregister();
++ err_out:
++	return error;
+ }
+-module_init(init_ath_pci);
++module_init(ath9k_init);
+ 
+-static void __exit exit_ath_pci(void)
++static void __exit ath9k_exit(void)
+ {
++	ath_pci_exit();
+ 	ath_rate_control_unregister();
+-	pci_unregister_driver(&ath_pci_driver);
+ 	printk(KERN_INFO "%s: Driver unloaded\n", dev_info);
+ }
+-module_exit(exit_ath_pci);
++module_exit(ath9k_exit);
+--- /dev/null
++++ b/drivers/net/wireless/ath9k/pci.c
+@@ -0,0 +1,289 @@
++/*
++ * Copyright (c) 2008 Atheros Communications Inc.
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++
++#include <linux/nl80211.h>
++#include <linux/pci.h>
++#include "core.h"
++#include "reg.h"
++#include "hw.h"
++
++static struct pci_device_id ath_pci_id_table[] __devinitdata = {
++	{ PCI_VDEVICE(ATHEROS, 0x0023) }, /* PCI   */
++	{ PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
++	{ PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI   */
++	{ PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI   */
++	{ PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
++	{ PCI_VDEVICE(ATHEROS, 0x002B) }, /* PCI-E */
++	{ 0 }
++};
++
++/* return bus cachesize in 4B word units */
++static void ath_pci_read_cachesize(struct ath_softc *sc, int *csz)
++{
++	u8 u8tmp;
++
++	pci_read_config_byte(to_pci_dev(sc->dev), PCI_CACHE_LINE_SIZE,
++			     (u8 *)&u8tmp);
++	*csz = (int)u8tmp;
++
++	/*
++	 * This check was put in to avoid "unplesant" consequences if
++	 * the bootrom has not fully initialized all PCI devices.
++	 * Sometimes the cache line size register is not set
++	 */
++
++	if (*csz == 0)
++		*csz = DEFAULT_CACHELINE >> 2;   /* Use the default size */
++}
++
++static void ath_pci_cleanup(struct ath_softc *sc)
++{
++	struct pci_dev *pdev = to_pci_dev(sc->dev);
++
++	ath_detach(sc);
++	if (pdev->irq)
++		free_irq(pdev->irq, sc);
++	pci_iounmap(pdev, sc->mem);
++	pci_release_region(pdev, 0);
++	pci_disable_device(pdev);
++	ieee80211_free_hw(sc->hw);
++}
++
++static struct ath_bus_ops ath_pci_bus_ops = {
++	.read_cachesize = ath_pci_read_cachesize,
++	.cleanup = ath_pci_cleanup,
++};
++
++static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
++{
++	void __iomem *mem;
++	struct ath_softc *sc;
++	struct ieee80211_hw *hw;
++	u8 csz;
++	u32 val;
++	int ret = 0;
++	struct ath_hal *ah;
++
++	if (pci_enable_device(pdev))
++		return -EIO;
++
++	ret =  pci_set_dma_mask(pdev, DMA_32BIT_MASK);
++
++	if (ret) {
++		printk(KERN_ERR "ath9k: 32-bit DMA not available\n");
++		goto bad;
++	}
++
++	ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
++
++	if (ret) {
++		printk(KERN_ERR "ath9k: 32-bit DMA consistent "
++			"DMA enable failed\n");
++		goto bad;
++	}
++
++	/*
++	 * Cache line size is used to size and align various
++	 * structures used to communicate with the hardware.
++	 */
++	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
++	if (csz == 0) {
++		/*
++		 * Linux 2.4.18 (at least) writes the cache line size
++		 * register as a 16-bit wide register which is wrong.
++		 * We must have this setup properly for rx buffer
++		 * DMA to work so force a reasonable value here if it
++		 * comes up zero.
++		 */
++		csz = L1_CACHE_BYTES / sizeof(u32);
++		pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
++	}
++	/*
++	 * The default setting of latency timer yields poor results,
++	 * set it to the value used by other systems. It may be worth
++	 * tweaking this setting more.
++	 */
++	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
++
++	pci_set_master(pdev);
++
++	/*
++	 * Disable the RETRY_TIMEOUT register (0x41) to keep
++	 * PCI Tx retries from interfering with C3 CPU state.
++	 */
++	pci_read_config_dword(pdev, 0x40, &val);
++	if ((val & 0x0000ff00) != 0)
++		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
++
++	ret = pci_request_region(pdev, 0, "ath9k");
++	if (ret) {
++		dev_err(&pdev->dev, "PCI memory region reserve error\n");
++		ret = -ENODEV;
++		goto bad;
++	}
++
++	mem = pci_iomap(pdev, 0, 0);
++	if (!mem) {
++		printk(KERN_ERR "PCI memory map error\n") ;
++		ret = -EIO;
++		goto bad1;
++	}
++
++	hw = ieee80211_alloc_hw(sizeof(struct ath_softc), &ath9k_ops);
++	if (hw == NULL) {
++		printk(KERN_ERR "ath_pci: no memory for ieee80211_hw\n");
++		goto bad2;
++	}
++
++	SET_IEEE80211_DEV(hw, &pdev->dev);
++	pci_set_drvdata(pdev, hw);
++
++	sc = hw->priv;
++	sc->hw = hw;
++	sc->dev = &pdev->dev;
++	sc->mem = mem;
++	sc->bus_ops = &ath_pci_bus_ops;
++
++	if (ath_attach(id->device, sc) != 0) {
++		ret = -ENODEV;
++		goto bad3;
++	}
++
++	/* setup interrupt service routine */
++
++	if (request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath", sc)) {
++		printk(KERN_ERR "%s: request_irq failed\n",
++			wiphy_name(hw->wiphy));
++		ret = -EIO;
++		goto bad4;
++	}
++
++	ah = sc->sc_ah;
++	printk(KERN_INFO
++	       "%s: Atheros AR%s MAC/BB Rev:%x "
++	       "AR%s RF Rev:%x: mem=0x%lx, irq=%d\n",
++	       wiphy_name(hw->wiphy),
++	       ath_mac_bb_name(ah->ah_macVersion),
++	       ah->ah_macRev,
++	       ath_rf_name((ah->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR)),
++	       ah->ah_phyRev,
++	       (unsigned long)mem, pdev->irq);
++
++	return 0;
++bad4:
++	ath_detach(sc);
++bad3:
++	ieee80211_free_hw(hw);
++bad2:
++	pci_iounmap(pdev, mem);
++bad1:
++	pci_release_region(pdev, 0);
++bad:
++	pci_disable_device(pdev);
++	return ret;
++}
++
++static void ath_pci_remove(struct pci_dev *pdev)
++{
++	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
++	struct ath_softc *sc = hw->priv;
++
++	ath_pci_cleanup(sc);
++}
++
++#ifdef CONFIG_PM
++
++static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state)
++{
++	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
++	struct ath_softc *sc = hw->priv;
++
++	ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
++
++#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
++	if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
++		cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll);
++#endif
++
++	pci_save_state(pdev);
++	pci_disable_device(pdev);
++	pci_set_power_state(pdev, 3);
++
++	return 0;
++}
++
++static int ath_pci_resume(struct pci_dev *pdev)
++{
++	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
++	struct ath_softc *sc = hw->priv;
++	u32 val;
++	int err;
++
++	err = pci_enable_device(pdev);
++	if (err)
++		return err;
++	pci_restore_state(pdev);
++	/*
++	 * Suspend/Resume resets the PCI configuration space, so we have to
++	 * re-disable the RETRY_TIMEOUT register (0x41) to keep
++	 * PCI Tx retries from interfering with C3 CPU state
++	 */
++	pci_read_config_dword(pdev, 0x40, &val);
++	if ((val & 0x0000ff00) != 0)
++		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
++
++	/* Enable LED */
++	ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
++			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
++	ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
++
++#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
++	/*
++	 * check the h/w rfkill state on resume
++	 * and start the rfkill poll timer
++	 */
++	if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
++		queue_delayed_work(sc->hw->workqueue,
++				   &sc->rf_kill.rfkill_poll, 0);
++#endif
++
++	return 0;
++}
++
++#endif /* CONFIG_PM */
++
++MODULE_DEVICE_TABLE(pci, ath_pci_id_table);
++
++static struct pci_driver ath_pci_driver = {
++	.name       = "ath9k",
++	.id_table   = ath_pci_id_table,
++	.probe      = ath_pci_probe,
++	.remove     = ath_pci_remove,
++#ifdef CONFIG_PM
++	.suspend    = ath_pci_suspend,
++	.resume     = ath_pci_resume,
++#endif /* CONFIG_PM */
++};
++
++int __init ath_pci_init(void)
++{
++	return pci_register_driver(&ath_pci_driver);
++}
++
++void ath_pci_exit(void)
++{
++	pci_unregister_driver(&ath_pci_driver);
++}