diff options
| author | Travis Kemen <thepeople@openwrt.org> | 2009-01-22 22:00:07 +0000 |
|---|---|---|
| committer | Travis Kemen <thepeople@openwrt.org> | 2009-01-22 22:00:07 +0000 |
| commit | 4337de497757ad101c871935a9559171ce4c4a52 (patch) | |
| tree | e15b1e8c0abb05b49896cf036d118941bfd2946c /package/madwifi/files | |
| parent | 2332708af1f4baace1847a1662f8f806c76577d4 (diff) | |
| download | mtk-20170518-4337de497757ad101c871935a9559171ce4c4a52.zip mtk-20170518-4337de497757ad101c871935a9559171ce4c4a52.tar.gz mtk-20170518-4337de497757ad101c871935a9559171ce4c4a52.tar.bz2 | |
Allow changing country code for madwifi driver. Thanks alisonken1
SVN-Revision: 14148
Diffstat (limited to 'package/madwifi/files')
| -rwxr-xr-x | package/madwifi/files/lib/wifi/madwifi.sh | 18 |
1 files changed, 14 insertions, 4 deletions
diff --git a/package/madwifi/files/lib/wifi/madwifi.sh b/package/madwifi/files/lib/wifi/madwifi.sh index d53bc06..550bba7 100755 --- a/package/madwifi/files/lib/wifi/madwifi.sh +++ b/package/madwifi/files/lib/wifi/madwifi.sh @@ -67,6 +67,15 @@ disable_atheros() ( enable_atheros() { local device="$1" + # Can only set the country code to one setting for the entire system. The last country code is the one that will be applied. + config_get country "$device" country + [ -z "$country" ] && country="0" + local cc="0" + [ -e /proc/sys/dev/$device/countrycode ] && cc="$(cat /proc/sys/dev/$device/countrycode)" + if [ ! "$cc" = "$country" ] ; then + rmmod ath_pci + insmod ath_pci countrycode=$country + fi config_get channel "$device" channel config_get vifs "$device" vifs @@ -278,10 +287,6 @@ enable_atheros() { ifconfig "$ifname" up - # TXPower settings only work if device is up already - config_get txpwr "$vif" txpower - [ -n "$txpwr" ] && iwconfig "$ifname" txpower "${txpwr%%.*}" - local net_cfg bridge net_cfg="$(find_net_config "$vif")" [ -z "$net_cfg" ] || { @@ -292,6 +297,11 @@ enable_atheros() { [ -n "$ssid" ] && iwconfig "$ifname" essid on iwconfig "$ifname" essid "$ssid" set_wifi_up "$vif" "$ifname" + + # TXPower settings only work if device is up already + config_get txpwr "$vif" txpower + [ -n "$txpwr" ] && iwconfig "$ifname" txpower "${txpwr%%.*}" + case "$mode" in ap) config_get_bool isolate "$vif" isolate 0 |