mac80211: update to wireless-testing 2013-06-27, fix ATH_USER_REGD handling

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37097

1 files changed, 208 insertions, 9 deletions

diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch
index e025a67..c621eb6 100644
--- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch
+++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch
@@ -1,16 +1,38 @@
 --- a/nl80211.h
 +++ b/nl80211.h
-@@ -1724,8 +1724,7 @@ enum nl80211_attrs {
- 	NL80211_ATTR_MDID,
- 	NL80211_ATTR_IE_RIC,
+@@ -27,6 +27,8 @@
  
--	NL80211_ATTR_CRIT_PROT_ID,
--	NL80211_ATTR_MAX_CRIT_PROT_DURATION,
-+	NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+ #include <linux/types.h>
+ 
++#define NL80211_GENL_NAME "nl80211"
++
+ /**
+  * DOC: Station handling
+  *
+@@ -1429,6 +1431,11 @@ enum nl80211_commands {
+  * @NL80211_ATTR_MAX_CRIT_PROT_DURATION: duration in milliseconds in which
+  *      the connection should have increased reliability (u16).
+  *
++ * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16).
++ *	This is similar to @NL80211_ATTR_STA_AID but with a difference of being
++ *	allowed to be used with the first @NL80211_CMD_SET_STATION command to
++ *	update a TDLS peer STA entry.
++ *
+  * @NL80211_ATTR_MAX: highest attribute number currently defined
+  * @__NL80211_ATTR_AFTER_LAST: internal use
+  */
+@@ -1727,6 +1734,10 @@ enum nl80211_attrs {
+ 	NL80211_ATTR_CRIT_PROT_ID,
+ 	NL80211_ATTR_MAX_CRIT_PROT_DURATION,
  
++	NL80211_ATTR_PEER_AID,
++
++	NL80211_ATTR_WIPHY_ANTENNA_GAIN,
++
  	/* add attributes here, update the policy in nl80211.c */
  
-@@ -1991,6 +1990,10 @@ enum nl80211_sta_bss_param {
+ 	__NL80211_ATTR_AFTER_LAST,
+@@ -1991,6 +2002,10 @@ enum nl80211_sta_bss_param {
   * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode
   * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards
   *	non-peer STA
@@ -21,7 +43,7 @@
   * @__NL80211_STA_INFO_AFTER_LAST: internal
   * @NL80211_STA_INFO_MAX: highest possible station info attribute
   */
-@@ -2020,6 +2023,8 @@ enum nl80211_sta_info {
+@@ -2020,6 +2035,8 @@ enum nl80211_sta_info {
  	NL80211_STA_INFO_NONPEER_PM,
  	NL80211_STA_INFO_RX_BYTES64,
  	NL80211_STA_INFO_TX_BYTES64,
@@ -30,7 +52,16 @@
  
  	/* keep last */
  	__NL80211_STA_INFO_AFTER_LAST,
-@@ -2424,6 +2429,7 @@ enum nl80211_mntr_flags {
+@@ -2413,6 +2430,8 @@ enum nl80211_survey_info {
+  * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
+  * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
+  *	overrides all other flags.
++ * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address
++ *	and ACK incoming unicast packets.
+  *
+  * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
+  * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
+@@ -2424,6 +2443,7 @@ enum nl80211_mntr_flags {
  	NL80211_MNTR_FLAG_CONTROL,
  	NL80211_MNTR_FLAG_OTHER_BSS,
  	NL80211_MNTR_FLAG_COOK_FRAMES,
@@ -38,3 +69,171 @@
  
  	/* keep last */
  	__NL80211_MNTR_FLAG_AFTER_LAST,
+@@ -2559,6 +2579,10 @@ enum nl80211_mesh_power_mode {
+  *
+  * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs)
+  *
++ * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've
++ *	established peering with for longer than this time (in seconds), then
++ *	remove it from the STA's list of peers.  Default is 30 minutes.
++ *
+  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
+  */
+ enum nl80211_meshconf_params {
+@@ -2590,6 +2614,7 @@ enum nl80211_meshconf_params {
+ 	NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
+ 	NL80211_MESHCONF_POWER_MODE,
+ 	NL80211_MESHCONF_AWAKE_WINDOW,
++	NL80211_MESHCONF_PLINK_TIMEOUT,
+ 
+ 	/* keep last */
+ 	__NL80211_MESHCONF_ATTR_AFTER_LAST,
+@@ -2637,6 +2662,10 @@ enum nl80211_meshconf_params {
+  * @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will
+  *	implement an MPM which handles peer allocation and state.
+  *
++ * @NL80211_MESH_SETUP_AUTH_PROTOCOL: Inform the kernel of the authentication
++ *	method (u8, as defined in IEEE 8.4.2.100.6, e.g. 0x1 for SAE).
++ *	Default is no authentication method required.
++ *
+  * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
+  *
+  * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
+@@ -2650,6 +2679,7 @@ enum nl80211_mesh_setup_params {
+ 	NL80211_MESH_SETUP_USERSPACE_AMPE,
+ 	NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC,
+ 	NL80211_MESH_SETUP_USERSPACE_MPM,
++	NL80211_MESH_SETUP_AUTH_PROTOCOL,
+ 
+ 	/* keep last */
+ 	__NL80211_MESH_SETUP_ATTR_AFTER_LAST,
+@@ -2730,6 +2760,8 @@ enum nl80211_channel_type {
+  *	and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well
+  * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
+  *	attribute must be provided as well
++ * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel
++ * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel
+  */
+ enum nl80211_chan_width {
+ 	NL80211_CHAN_WIDTH_20_NOHT,
+@@ -2738,6 +2770,8 @@ enum nl80211_chan_width {
+ 	NL80211_CHAN_WIDTH_80,
+ 	NL80211_CHAN_WIDTH_80P80,
+ 	NL80211_CHAN_WIDTH_160,
++	NL80211_CHAN_WIDTH_5,
++	NL80211_CHAN_WIDTH_10,
+ };
+ 
+ /**
+@@ -3028,11 +3062,11 @@ enum nl80211_tx_power_setting {
+ };
+ 
+ /**
+- * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute
+- * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute
+- * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has
++ * enum nl80211_packet_pattern_attr - packet pattern attribute
++ * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
++ * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has
+  *	a zero bit are ignored
+- * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have
++ * @NL80211_PKTPAT_MASK: pattern mask, must be long enough to have
+  *	a bit for each byte in the pattern. The lowest-order bit corresponds
+  *	to the first byte of the pattern, but the bytes of the pattern are
+  *	in a little-endian-like format, i.e. the 9th byte of the pattern
+@@ -3043,23 +3077,23 @@ enum nl80211_tx_power_setting {
+  *	Note that the pattern matching is done as though frames were not
+  *	802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
+  *	first (including SNAP header unpacking) and then matched.
+- * @NL80211_WOWLAN_PKTPAT_OFFSET: packet offset, pattern is matched after
++ * @NL80211_PKTPAT_OFFSET: packet offset, pattern is matched after
+  *	these fixed number of bytes of received packet
+- * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes
+- * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number
++ * @NUM_NL80211_PKTPAT: number of attributes
++ * @MAX_NL80211_PKTPAT: max attribute number
+  */
+-enum nl80211_wowlan_packet_pattern_attr {
+-	__NL80211_WOWLAN_PKTPAT_INVALID,
+-	NL80211_WOWLAN_PKTPAT_MASK,
+-	NL80211_WOWLAN_PKTPAT_PATTERN,
+-	NL80211_WOWLAN_PKTPAT_OFFSET,
++enum nl80211_packet_pattern_attr {
++	__NL80211_PKTPAT_INVALID,
++	NL80211_PKTPAT_MASK,
++	NL80211_PKTPAT_PATTERN,
++	NL80211_PKTPAT_OFFSET,
+ 
+-	NUM_NL80211_WOWLAN_PKTPAT,
+-	MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1,
++	NUM_NL80211_PKTPAT,
++	MAX_NL80211_PKTPAT = NUM_NL80211_PKTPAT - 1,
+ };
+ 
+ /**
+- * struct nl80211_wowlan_pattern_support - pattern support information
++ * struct nl80211_pattern_support - packet pattern support information
+  * @max_patterns: maximum number of patterns supported
+  * @min_pattern_len: minimum length of each pattern
+  * @max_pattern_len: maximum length of each pattern
+@@ -3069,13 +3103,22 @@ enum nl80211_wowlan_packet_pattern_attr 
+  * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
+  * capability information given by the kernel to userspace.
+  */
+-struct nl80211_wowlan_pattern_support {
++struct nl80211_pattern_support {
+ 	__u32 max_patterns;
+ 	__u32 min_pattern_len;
+ 	__u32 max_pattern_len;
+ 	__u32 max_pkt_offset;
+ } __attribute__((packed));
+ 
++/* only for backward compatibility */
++#define __NL80211_WOWLAN_PKTPAT_INVALID __NL80211_PKTPAT_INVALID
++#define NL80211_WOWLAN_PKTPAT_MASK NL80211_PKTPAT_MASK
++#define NL80211_WOWLAN_PKTPAT_PATTERN NL80211_PKTPAT_PATTERN
++#define NL80211_WOWLAN_PKTPAT_OFFSET NL80211_PKTPAT_OFFSET
++#define NUM_NL80211_WOWLAN_PKTPAT NUM_NL80211_PKTPAT
++#define MAX_NL80211_WOWLAN_PKTPAT MAX_NL80211_PKTPAT
++#define nl80211_wowlan_pattern_support nl80211_pattern_support
++
+ /**
+  * enum nl80211_wowlan_triggers - WoWLAN trigger definitions
+  * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
+@@ -3095,7 +3138,7 @@ struct nl80211_wowlan_pattern_support {
+  *	pattern matching is done after the packet is converted to the MSDU.
+  *
+  *	In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
+- *	carrying a &struct nl80211_wowlan_pattern_support.
++ *	carrying a &struct nl80211_pattern_support.
+  *
+  *	When reporting wakeup. it is a u32 attribute containing the 0-based
+  *	index of the pattern that caused the wakeup, in the patterns passed
+@@ -3252,7 +3295,7 @@ struct nl80211_wowlan_tcp_data_token_fea
+  * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a
+  *	u32 attribute holding the maximum length
+  * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for
+- *	feature advertising. The mask works like @NL80211_WOWLAN_PKTPAT_MASK
++ *	feature advertising. The mask works like @NL80211_PKTPAT_MASK
+  *	but on the TCP payload only.
+  * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes
+  * @MAX_NL80211_WOWLAN_TCP: highest attribute number
+@@ -3556,6 +3599,10 @@ enum nl80211_ap_sme_features {
+  *	Peering Management entity which may be implemented by registering for
+  *	beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is
+  *	still generated by the driver.
++ * @NL80211_FEATURE_ACTIVE_MONITOR: This driver supports an active monitor
++ *	interface. An active monitor interface behaves like a normal monitor
++ *	interface, but gets added to the driver. It ensures that incoming
++ *	unicast packets directed at the configured interface address get ACKed.
+  */
+ enum nl80211_feature_flags {
+ 	NL80211_FEATURE_SK_TX_STATUS			= 1 << 0,
+@@ -3575,6 +3622,7 @@ enum nl80211_feature_flags {
+ 	NL80211_FEATURE_ADVERTISE_CHAN_LIMITS		= 1 << 14,
+ 	NL80211_FEATURE_FULL_AP_CLIENT_STATE		= 1 << 15,
+ 	NL80211_FEATURE_USERSPACE_MPM			= 1 << 16,
++	NL80211_FEATURE_ACTIVE_MONITOR			= 1 << 17,
+ };
+ 
+ /**