move ltq-adsl-tool

SVN-Revision: 34694

4 files changed, 0 insertions, 467 deletions

diff --git a/package/network/config/ltq-dsl-app/Config.in b/package/network/config/ltq-dsl-app/Config.in
deleted file mode 100644
index 728fe65..0000000
--- a/package/network/config/ltq-dsl-app/Config.in
+++ /dev/null
@@ -1,9 +0,0 @@
-config LTQ_DSL_ENABLE_SOAP
-	bool "Enable SOAP support"
-	depends on PACKAGE_ltq-dsl-app
-	default n
-
-config LTQ_DSL_ENABLE_DSL_EVENT_POLLING
-	bool "Include Event Polling support"
-	depends on PACKAGE_ltq-dsl-app
-	default n
diff --git a/package/network/config/ltq-dsl-app/Makefile b/package/network/config/ltq-dsl-app/Makefile
deleted file mode 100644
index 37a72ee..0000000
--- a/package/network/config/ltq-dsl-app/Makefile
+++ /dev/null
@@ -1,99 +0,0 @@
-#
-# Copyright (C) 2011-2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=dsl_cpe_control_danube
-PKG_VERSION:=3.24.4.4
-PKG_RELEASE:=2
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_BUILD_DIR:=$(BUILD_DIR)/dsl_cpe_control-$(PKG_VERSION)
-PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources/
-PKG_MD5SUM:=ee315306626b68794d3d3636dabfe161
-PKG_MAINTAINER:=John Crispin <blogic@openwrt.org>
-
-PKG_FIXUP:=autoreconf
-
-PKG_CONFIG_DEPENDS:=\
-	CONFIG_LTQ_DSL_ENABLE_SOAP \
-	CONFIG_LTQ_DSL_ENABLE_DSL_EVENT_POLLING
-
-include $(INCLUDE_DIR)/package.mk
-
-PKG_BUILD_DEPENDS:=TARGET_lantiq_danube:kmod-ltq-dsl-danube TARGET_lantiq_ar9:kmod-ltq-dsl-ar9 \
-	TARGET_lantiq_vr9:kmod-ltq-dsl-vr9 TARGET_lantiq_ase:kmod-ltq-dsl-ase
-
-define Package/ltq-dsl-app
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=Lantiq DSL userland tool
-  URL:=http://www.lantiq.com/
-  DEPENDS:=@TARGET_lantiq&&!(TARGET_lantiq_falcon||TARGET_lantiq_falcon_stable) +libpthread
-  MENU:=1
-endef
-
-define Package/ltq-dsl-app/description
-	Infineon DSL CPE API for Amazon SE, Danube and Vinax.
-endef
-
-define Package/ltq-dsl-app/config
-	source "$(SOURCE)/Config.in"
-endef
-
-LTQ_DSL_MAX_DEVICE=1
-LTQ_DSL_LINES_PER_DEVICE=1
-LTQ_DSL_CHANNELS_PER_LINE=1
-
-CONFIGURE_ARGS += \
-	--with-max-device="$(LTQ_DSL_MAX_DEVICE)" \
-	--with-lines-per-device="$(LTQ_DSL_LINES_PER_DEVICE)" \
-	--with-channels-per-line="$(LTQ_DSL_CHANNELS_PER_LINE)" \
-	--enable-danube \
-	--enable-driver-include="-I$(STAGING_DIR)/usr/include" \
-	--enable-debug-prints \
-	--enable-add-appl-cflags="-DMAX_CLI_PIPES=2" \
-	--enable-cli-support \
-	--enable-cmv-scripts \
-	--enable-debug-tool-interface \
-	--enable-adsl-led \
-	--enable-dsl-ceoc \
-	--enable-script-notification \
-	--enable-dsl-pm \
-	--enable-dsl-pm-total \
-	--enable-dsl-pm-history \
-	--enable-dsl-pm-showtime \
-	--enable-dsl-pm-channel-counters \
-	--enable-dsl-pm-datapath-counters \
-	--enable-dsl-pm-line-counters \
-	--enable-dsl-pm-channel-thresholds \
-	--enable-dsl-pm-datapath-thresholds \
-	--enable-dsl-pm-line-thresholds \
-	--enable-dsl-pm-optional-parameters
-
-ifeq ($(CONFIG_LTQ_DSL_ENABLE_SOAP),y)
-CONFIGURE_ARGS += \
-	--enable-soap-support
-endif
-
-ifeq ($(CONFIG_LTQ_DSL_ENABLE_DSL_EVENT_POLLING),y)
-CONFIGURE_ARGS += \
-	--enable-dsl-event-polling
-endif
-
-TARGET_CFLAGS += -I$(LINUX_DIR)/include
-
-define Package/ltq-dsl-app/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) ./files/dsl_control $(1)/etc/init.d/
-
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dsl_cpe_control $(1)/sbin
-	$(INSTALL_BIN) ./files/dsl_notify.sh $(1)/sbin
-endef
-
-$(eval $(call BuildPackage,ltq-dsl-app))
diff --git a/package/network/config/ltq-dsl-app/files/dsl_control b/package/network/config/ltq-dsl-app/files/dsl_control
deleted file mode 100644
index 79961aa..0000000
--- a/package/network/config/ltq-dsl-app/files/dsl_control
+++ /dev/null
@@ -1,315 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2012 OpenWrt.org
-
-START=99
-
-EXTRA_COMMANDS="status lucistat"
-EXTRA_HELP="	status  Get DSL status information
-	lucistat  Get status information if lua friendly format"
-
-SERVICE_DAEMONIZE=1
-SERVICE_WRITE_PID=1
-
-#
-# Basic functions to send CLI commands to the dsl_cpe_control daemon
-#
-dsl_cmd() {
-	killall -0 dsl_cpe_control && (
-		echo "$@" > /tmp/pipe/dsl_cpe0_cmd
-		cat /tmp/pipe/dsl_cpe0_ack
-	)
-}
-dsl_val() {
-	echo $(expr "$1" : '.*'$2'=\([-\.[:alnum:]]*\).*')
-}
-
-#
-# Simple divide by 10 routine to cope with one decimal place
-#
-dbt() {
-	local a=$(expr $1 / 10)
-	local b=$(expr $1 % 10)
-	echo "${a}.${b}"
-}
-#
-# Take a number and convert to k or meg
-#
-scale() {
-	local val=$1
-	local a
-	local b
-
-	if [ "$val" -gt 1000000 ]; then
-		a=$(expr $val / 1000)
-		b=$(expr $a % 1000)
-		a=$(expr $a / 1000)
-		printf "%d.%03d Mb" ${a} ${b}
-	elif [ "$val" -gt 1000 ]; then
-		a=$(expr $val / 1000)
-		printf "%d Kb" ${a}
-	else
-		echo "${val} b"
-	fi
-}
-
-#
-# Read the data rates for both directions
-#
-data_rates() {
-	local csg
-	local dru
-	local drd
-	local sdru
-	local sdrd
-
-	csg=$(dsl_cmd g997csg 0 1)
-	drd=$(dsl_val "$csg" ActualDataRate)
-
-	csg=$(dsl_cmd g997csg 0 0)
-	dru=$(dsl_val "$csg" ActualDataRate)
-
-	[ -z "$drd" ] && drd=0
-	[ -z "$dru" ] && dru=0
-
-	sdrd=$(scale $drd)
-	sdru=$(scale $dru)
-
-	if [ "$action" = "lucistat" ]; then
-		echo "dsl.data_rate_down=$drd"
-		echo "dsl.data_rate_up=$dru"
-		echo "dsl.data_rate_down_s=\"$sdrd\""
-		echo "dsl.data_rate_up_s=\"$sdru\""
-	else
-		echo "Data Rate:		${sdrd}/s / ${sdru}/s"
-	fi
-}
-
-#
-# Chipset
-#
-chipset() {
-	local vig
-	local cs
-	local csv
-
-	vig=$(dsl_cmd vig)
-	cs=$(dsl_val "$vig" DSL_ChipSetType)
-	csv=$(dsl_val "$vig" DSL_ChipSetHWVersion)
-
-	if [ "$action" = "lucistat" ]; then
-		echo "dsl.chipset=\"${cs} ${csv}\""
-	else
-		echo "Chipset:		${cs} ${csv}"
-	fi
-}
-
-#
-# Work out how long the line has been up
-#
-line_uptime() {
-	local ccsg
-	local et
-	local etr
-	local d
-	local h
-	local m
-	local s
-	local rc=""
-
-	ccsg=$(dsl_cmd pmccsg 0 0 0)
-	et=$(dsl_val "$ccsg" nElapsedTime)
-
-	[ -z "$et" ] && et=0
-
-	if [ "$action" = "lucistat" ]; then
-		echo "dsl.line_uptime=${et}"
-		return
-	fi
-
-	d=$(expr $et / 86400)
-	etr=$(expr $et % 86400)
-	h=$(expr $etr / 3600)
-	etr=$(expr $etr % 3600)
-	m=$(expr $etr / 60)
-	s=$(expr $etr % 60)
-
-
-	[ "${d}${h}${m}${s}" -ne 0 ] && rc="${s}s"
-	[ "${d}${h}${m}" -ne 0 ] && rc="${m}m ${rc}"
-	[ "${d}${h}" -ne 0 ] && rc="${h}h ${rc}"
-	[ "${d}" -ne 0 ] && rc="${d}d ${rc}"
-
-	[ -z "$rc" ] && rc="down"
-	echo "Line Uptime:		${rc}"
-}
-
-#
-# Get noise and attenuation figures
-#
-line_data() {
-	local lsg
-	local latnu
-	local latnd
-	local snru
-	local snrd
-
-	lsg=$(dsl_cmd g997lsg 1 1)
-	latnd=$(dsl_val "$lsg" LATN)
-	snrd=$(dsl_val "$lsg" SNR)
-
-	lsg=$(dsl_cmd g997lsg 0 1)
-	latnu=$(dsl_val "$lsg" LATN)
-	snru=$(dsl_val "$lsg" SNR)
-
-	[ -z "$latnd" ] && latnd=0
-	[ -z "$latnu" ] && latnu=0
-	[ -z "$snrd" ] && snrd=0
-	[ -z "$snru" ] && snru=0
-
-	latnd=$(dbt $latnd)
-	latnu=$(dbt $latnu)
-	snrd=$(dbt $snrd)
-	snru=$(dbt $snru)
-	
-	if [ "$action" = "lucistat" ]; then
-		echo "dsl.line_attenuation_down=$latnd"
-		echo "dsl.line_attenuation_up=$latnu"
-		echo "dsl.noise_margin_down=$snrd"
-		echo "dsl.noise_margin_up=$snru"
-	else
-		echo "Line Attenuation:	${latnd}dB / ${latnu}dB"
-		echo "Noise Margin:		${snrd}dB / ${snru}dB"
-	fi
-}
-
-#
-# Is the line up? Or what state is it in?
-#
-line_state() {
-	local lsg=$(dsl_cmd lsg)
-	local ls=$(dsl_val "$lsg" nLineState);
-	local s;
-
-	case "$ls" in
-		"0x0")		s="not initialized" ;;
-		"0x1")		s="exception" ;;
-		"0x10")		s="not updated" ;;
-		"0xff")		s="idle request" ;;
-		"0x100")	s="idle" ;;
-		"0x1ff")	s="silent request" ;;
-		"0x200")	s="silent" ;;
-		"0x300")	s="handshake" ;;
-		"0x380")	s="full_init" ;;
-		"0x400")	s="discovery" ;;
-		"0x500")	s="training" ;;
-		"0x600")	s="analysis" ;;
-		"0x700")	s="exchange" ;;
-		"0x800")	s="showtime_no_sync" ;;
-		"0x801")	s="showtime_tc_sync" ;;
-		"0x900")	s="fastretrain" ;;
-		"0xa00")	s="lowpower_l2" ;;
-		"0xb00")	s="loopdiagnostic active" ;;
-		"0xb10")	s="loopdiagnostic data exchange" ;;
-		"0xb20")	s="loopdiagnostic data request" ;;
-		"0xc00")	s="loopdiagnostic complete" ;;
-		"0x1000000")	s="test" ;;
-		"0xd00")	s="resync" ;;
-		"0x3c0")	s="short init entry" ;;
-		"")		s="not running daemon"; ls="0xfff" ;;
-		*)		s="unknown" ;;
-	esac
-
-	if [ $action = "lucistat" ]; then
-		echo "dsl.line_state_num=$ls"
-		echo "dsl.line_state_detail=\"$s\""
-		if [ "$ls" = "0x801" ]; then
-			echo "dsl.line_state=\"UP\""
-		else
-			echo "dsl.line_state=\"DOWN\""
-		fi
-	else
-		if [ "$ls" = "0x801" ]; then
-			echo "Line State:		UP [$ls: $s]"
-		else
-			echo "Line State:		DOWN [$ls: $s]"
-		fi
-	fi
-}
-
-#
-# Main status routine
-#
-status() {
-	chipset
-	line_state
-	data_rates
-	line_data
-	line_uptime
-}
-
-#
-# Luci (lua) compatible version that's easy to parse
-#
-lucistat() {
-	echo "local dsl={}"
-	status
-	echo "return dsl"
-}
-
-
-annex_b=10_00_10_00_00_04_00_00
-annex_bdmt=10_00_00_00_00_00_00_00
-annex_b2=00_00_10_00_00_00_00_00
-annex_b2p=00_00_00_00_00_04_00_00
-annex_a=04_01_04_00_00_01_00_00
-annex_at1=01_00_00_00_00_00_00_00
-annex_alite=00_01_00_00_00_00_00_00
-annex_admt=04_00_00_00_00_00_00_00
-annex_a2=00_00_04_00_00_00_00_00
-annex_a2p=00_00_00_00_00_01_00_00
-annex_l=00_00_00_00_04_00_00_00
-annex_m=00_00_00_00_40_00_04_00
-annex_m2=00_00_00_00_40_00_00_00
-annex_m2p=00_00_00_00_00_00_04_00
-
-#
-# Simple start routine
-#
-start() {
-	local annex
-	local fwannex
-	local xtu
-	config_load network
-	config_get annex adsl annex
-	config_get fwannex adsl fwannex
-
-	# get xtu
-	eval "xtu=\"\${annex_$annex}\""
-
-	# check for invalid annex mode
-	[ -n "${annex}" -a -z "${xtu}" ] &&
-		echo "unknown annex mode $annex"
-
-	# check for invalid fw annex mode
-	[[ "$fwannex" != "a" && "$fwannex" != "b" ]] &&
-		echo "invalid fwannex: $fwannex"
-
-	# start CPE dsl daemon in the background
-	service_start /sbin/dsl_cpe_control -i${xtu} \
-			-n /sbin/dsl_notify.sh \
-			-f /lib/firmware/dsl-fw-${fwannex}.bin
-}
-
-#
-# For stop we want to simulate the notification call for when
-# the line goes down, so that we can stop the ppp link before
-# we die.
-#
-stop() {
-	DSL_NOTIFICATION_TYPE="DSL_INTERFACE_STATUS" \
-	DSL_INTERFACE_STATUS="DOWN" \
-	/sbin/dsl_notify.sh
-
-	service_stop /sbin/dsl_cpe_control
-}
-
diff --git a/package/network/config/ltq-dsl-app/files/dsl_notify.sh b/package/network/config/ltq-dsl-app/files/dsl_notify.sh
deleted file mode 100644
index 5e9f396..0000000
--- a/package/network/config/ltq-dsl-app/files/dsl_notify.sh
+++ /dev/null
@@ -1,44 +0,0 @@
-#!/bin/sh
-#
-# This script is called by dsl_cpe_control whenever there is a DSL event,
-# we only actually care about the DSL_INTERFACE_STATUS events as these
-# tell us the line has either come up or gone down.
-#
-# The rest of the code is basically the same at the atm hotplug code
-#
-
-[ "$DSL_NOTIFICATION_TYPE" = "DSL_INTERFACE_STATUS" ] || exit 0
-
-. /lib/functions.sh
-
-include /lib/network
-scan_interfaces
-
-local found=0
-local ifc
-for ifc in $interfaces; do
-	local up
-	config_get_bool up "$ifc" up 0
-
-	local auto
-	config_get_bool auto "$ifc" auto 1
-
-	local proto
-	config_get proto "$ifc" proto
-
-	if [ "$DSL_INTERFACE_STATUS" = "UP" ]; then
-		if [ "$proto" = "pppoa" ] && [ "$up" != 1 ] && [ "$auto" = 1 ]; then
-			found=1
-			( sleep 1; ifup "$ifc" ) &
-		fi
-	else
-		if [ "$proto" = "pppoa" ] && [ "$up" = 1 ] && [ "$auto" = 1 ]; then
-			found=1
-			( sleep 1; ifdown "$ifc" ) &
-		fi
-	fi
-done
-
-if [ "$found" != 1 ]; then
-	logger "Found no matching interface for DSL notification ($DSL_INTERFACE_STATUS)"
-fi