summaryrefslogtreecommitdiff
path: root/package/network
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2015-01-28 19:19:33 +0000
committerJohn Crispin <john@openwrt.org>2015-01-28 19:19:33 +0000
commit623716dd4318cd05022d5d1bb0875906ddfc12c2 (patch)
tree23a4656d291af5d8234b6263c97dedecb73d1a24 /package/network
parente25e6df2cf38de386cc5d06ec9b1e33ab3bce638 (diff)
downloadmtk-20170518-623716dd4318cd05022d5d1bb0875906ddfc12c2.zip
mtk-20170518-623716dd4318cd05022d5d1bb0875906ddfc12c2.tar.gz
mtk-20170518-623716dd4318cd05022d5d1bb0875906ddfc12c2.tar.bz2
comgt-ncm: Fix NCM protocol
This patch fixes the NCM protocol by adding the missing ifname to the netifd script and changing one unintended "send" statement to "print" in runcommand.gcom. It also cleans up logging and makes the manufacturer names case-insensitive. Furthermore, comgt-ncm should not depend on the USB-serial-related kernel modules, as the cdc-wdm control device works without them. There is also no need to depend on kmod-huawei-cdc-ncm, since other manufacturers (like Sony-Ericsson and Samsung) which use other kernel modules should also be supported. I'd appreciate if someone with Samsung or Sony-Ericsson modems could test this, I was only able to test it with Huawei E3276, E3372 and E353. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 44182
Diffstat (limited to 'package/network')
-rw-r--r--package/network/utils/comgt/Makefile2
-rw-r--r--package/network/utils/comgt/files/ncm.json4
-rw-r--r--package/network/utils/comgt/files/ncm.sh82
-rw-r--r--package/network/utils/comgt/files/runcommand.gcom9
4 files changed, 61 insertions, 36 deletions
diff --git a/package/network/utils/comgt/Makefile b/package/network/utils/comgt/Makefile
index 9ab2f14..500365a 100644
--- a/package/network/utils/comgt/Makefile
+++ b/package/network/utils/comgt/Makefile
@@ -44,7 +44,7 @@ endef
define Package/comgt-ncm
$(call Package/comgt/Default)
TITLE+=NCM 3G/4G Support
- DEPENDS:=+comgt +kmod-usb-serial +kmod-usb-serial-option +kmod-usb-net +kmod-usb-net-cdc-ncm +kmod-usb-net-huawei-cdc-ncm
+ DEPENDS:=+comgt
endef
define Package/comgt/description
diff --git a/package/network/utils/comgt/files/ncm.json b/package/network/utils/comgt/files/ncm.json
index b9b15cd..ea4f984 100644
--- a/package/network/utils/comgt/files/ncm.json
+++ b/package/network/utils/comgt/files/ncm.json
@@ -19,7 +19,7 @@
"connect": "AT^NDISDUP=1,1,\\\"${apn}\\\"${username:+,\\\"$username\\\"}${password:+,\\\"$password\\\"}${auth:+,$auth}",
"disconnect": "AT^NDISDUP=1,0"
},
- "SAMSUNG": {
+ "samsung": {
"initialize": [
"AT",
"AT+CGREG=2",
@@ -33,7 +33,7 @@
"connect": "AT+CGATT=1",
"disconnect": "AT+CGATT=0"
},
- "Sony": {
+ "sony": {
"initialize": [
"AT+CFUN=1",
"AT+CGDCONT=1,\\\"IP\\\",\\\"${apn}\\\"",
diff --git a/package/network/utils/comgt/files/ncm.sh b/package/network/utils/comgt/files/ncm.sh
index 14e421f..2c2835f 100644
--- a/package/network/utils/comgt/files/ncm.sh
+++ b/package/network/utils/comgt/files/ncm.sh
@@ -1,8 +1,10 @@
#!/bin/sh
-. /lib/functions.sh
-. ../netifd-proto.sh
-init_proto "$@"
+[ -n "$INCLUDE_ONLY" ] || {
+ . /lib/functions.sh
+ . ../netifd-proto.sh
+ init_proto "$@"
+}
proto_ncm_init_config() {
no_device=1
@@ -20,34 +22,52 @@ proto_ncm_init_config() {
proto_ncm_setup() {
local interface="$1"
- local manufacturer initialize setmode connect
+ local manufacturer initialize setmode connect ifname devname devpath
local device apn auth username password pincode delay mode
json_get_vars device apn auth username password pincode delay mode
[ -n "$device" ] || {
- echo "ncm[$$]" "No control device specified"
+ echo "No control device specified"
proto_notify_error "$interface" NO_DEVICE
proto_set_available "$interface" 0
return 1
}
[ -e "$device" ] || {
- echo "ncm[$$]" "Control device not valid"
+ echo "Control device not valid"
proto_set_available "$interface" 0
return 1
}
[ -n "$apn" ] || {
- echo "ncm[$$]" "No APN specified"
+ echo "No APN specified"
proto_notify_error "$interface" NO_APN
proto_set_available "$interface" 0
return 1
}
+ devname="$(basename "$device")"
+ case "$devname" in
+ 'tty'*)
+ devpath="$(readlink -f /sys/class/tty/$devname/device)"
+ ifname="$( ls "$devpath"/../../*/net )"
+ ;;
+ *)
+ devpath="$(readlink -f /sys/class/usbmisc/$devname/device/)"
+ ifname="$( ls "$devpath"/net )"
+ ;;
+ esac
+ [ -n "$ifname" ] || {
+ echo "The interface could not be found."
+ proto_notify_error "$interface" NO_IFACE
+ proto_set_available "$interface" 0
+ return 1
+ }
+
[ -n "$delay" ] && sleep "$delay"
- manufacturer=`gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk '/Manufacturer/ { print $2 }'`
+ manufacturer=`gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk '/Manufacturer/ { print tolower($2) }'`
[ $? -ne 0 ] && {
- echo "ncm[$$]" "Failed to get modem information"
+ echo "Failed to get modem information"
proto_notify_error "$interface" GETINFO_FAILED
proto_set_available "$interface" 0
return 1
@@ -56,7 +76,7 @@ proto_ncm_setup() {
json_load "$(cat /etc/gcom/ncm.json)"
json_select "$manufacturer"
[ $? -ne 0 ] && {
- echo "ncm[$$]" "Unsupported modem"
+ echo "Unsupported modem"
proto_notify_error "$interface" UNSUPPORTED_MODEM
proto_set_available "$interface" 0
return 1
@@ -64,7 +84,7 @@ proto_ncm_setup() {
json_get_values initialize initialize
for i in $initialize; do
eval COMMAND="$i" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
- echo "ncm[$$]" "Failed to initialize modem"
+ echo "Failed to initialize modem"
proto_notify_error "$interface" INITIALIZE_FAILED
proto_set_available "$interface" 0
return 1
@@ -73,7 +93,7 @@ proto_ncm_setup() {
[ -n "$pincode" ] && {
PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
- echo "ncm[$$]" "Unable to verify PIN"
+ echo "Unable to verify PIN"
proto_notify_error "$interface" PIN_FAILED
proto_block_restart "$interface"
return 1
@@ -83,7 +103,7 @@ proto_ncm_setup() {
json_select modes
json_get_var setmode "$mode"
COMMAND="$setmode" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
- echo "ncm[$$]" "Failed to set operating mode"
+ echo "Failed to set operating mode"
proto_notify_error "$interface" SETMODE_FAILED
proto_set_available "$interface" 0
return 1
@@ -91,66 +111,66 @@ proto_ncm_setup() {
json_select ..
}
- json_get_var connect connect
+ json_get_vars connect
eval COMMAND="$connect" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
- echo "ncm[$$]" "Failed to connect"
+ echo "Failed to connect"
proto_notify_error "$interface" CONNECT_FAILED
proto_set_available "$interface" 0
return 1
}
- echo "ncm[$$]" "Connected, starting DHCP"
- proto_init_update "*" 1
+ echo "Connected, starting DHCP"
+
+ proto_init_update "$ifname" 1
proto_send_update "$interface"
json_init
json_add_string name "${interface}_dhcp"
json_add_string ifname "@$interface"
json_add_string proto "dhcp"
- json_close_object
ubus call network add_dynamic "$(json_dump)"
json_init
json_add_string name "${interface}_dhcpv6"
json_add_string ifname "@$interface"
json_add_string proto "dhcpv6"
- json_close_object
ubus call network add_dynamic "$(json_dump)"
}
proto_ncm_teardown() {
local interface="$1"
- proto_init_update "*" 0
- proto_send_update "$interface"
-
local manufacturer disconnect
- local device
+ local device
json_get_vars device
- echo "ncm[$$]" "Stopping network"
+ echo "Stopping network"
- manufacturer=`gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk '/Manufacturer/ { print $2 }'`
+ manufacturer=`gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk '/Manufacturer/ { print tolower($2) }'`
[ $? -ne 0 ] && {
- echo "ncm[$$]" "Failed to get modem information"
+ echo "Failed to get modem information"
proto_notify_error "$interface" GETINFO_FAILED
return 1
}
json_load "$(cat /etc/gcom/ncm.json)"
json_select "$manufacturer" || {
- echo "ncm[$$]" "Unsupported modem"
+ echo "Unsupported modem"
proto_notify_error "$interface" UNSUPPORTED_MODEM
return 1
}
- json_get_var disconnect disconnect
+ json_get_vars disconnect
COMMAND="$disconnect" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
- echo "ncm[$$]" "Failed to disconnect"
+ echo "Failed to disconnect"
proto_notify_error "$interface" DISCONNECT_FAILED
return 1
}
-}
-add_protocol ncm
+ proto_init_update "*" 0
+ proto_send_update "$interface"
+}
+[ -n "$INCLUDE_ONLY" ] || {
+ add_protocol ncm
+}
diff --git a/package/network/utils/comgt/files/runcommand.gcom b/package/network/utils/comgt/files/runcommand.gcom
index ab24339..e99b6f9 100644
--- a/package/network/utils/comgt/files/runcommand.gcom
+++ b/package/network/utils/comgt/files/runcommand.gcom
@@ -6,14 +6,15 @@ opengt
flash 0.1
:start
- send "sending -> "
+ print "sending -> ",$env("COMMAND"),"\n"
send $env("COMMAND")
send "^m"
- waitfor 15 "OK","ERR","ERROR"
+ waitfor 15 "OK","ERR","ERROR","COMMAND NOT SUPPORT"
if % = 0 goto continue
if % = 1 goto error
if % = 2 goto error
+ if % = 3 goto notsupported
print "Timeout running AT-command\n"
exit 1
@@ -22,5 +23,9 @@ opengt
print "Error running AT-command\n"
exit 1
+:notsupported
+ print "AT-command not supported\n"
+ exit 1
+
:continue
exit 0