packages: clean up the package folder

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37007

1 files changed, 0 insertions, 309 deletions

diff --git a/package/px5g/src/polarssl/rsa.h b/package/px5g/src/polarssl/rsa.h
deleted file mode 100644
index b31dc2f..0000000
--- a/package/px5g/src/polarssl/rsa.h
+++ /dev/null
@@ -1,309 +0,0 @@
-/**
- * \file rsa.h
- *
- *  Based on XySSL: Copyright (C) 2006-2008  Christophe Devine
- *
- *  Copyright (C) 2009  Paul Bakker <polarssl_maintainer at polarssl dot org>
- *
- *  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *  
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in the
- *      documentation and/or other materials provided with the distribution.
- *    * Neither the names of PolarSSL or XySSL nor the names of its contributors
- *      may be used to endorse or promote products derived from this software
- *      without specific prior written permission.
- *  
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- *  FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- *  TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- *  PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#ifndef POLARSSL_RSA_H
-#define POLARSSL_RSA_H
-
-#include "polarssl/bignum.h"
-
-#define POLARSSL_ERR_RSA_BAD_INPUT_DATA                    -0x0400
-#define POLARSSL_ERR_RSA_INVALID_PADDING                   -0x0410
-#define POLARSSL_ERR_RSA_KEY_GEN_FAILED                    -0x0420
-#define POLARSSL_ERR_RSA_KEY_CHECK_FAILED                  -0x0430
-#define POLARSSL_ERR_RSA_PUBLIC_FAILED                     -0x0440
-#define POLARSSL_ERR_RSA_PRIVATE_FAILED                    -0x0450
-#define POLARSSL_ERR_RSA_VERIFY_FAILED                     -0x0460
-#define POLARSSL_ERR_RSA_OUTPUT_TO_LARGE                   -0x0470
-
-/*
- * PKCS#1 constants
- */
-#define RSA_RAW         0
-#define RSA_MD2         2
-#define RSA_MD4         3
-#define RSA_MD5         4
-#define RSA_SHA1        5
-#define RSA_SHA256      6
-
-#define RSA_PUBLIC      0
-#define RSA_PRIVATE     1
-
-#define RSA_PKCS_V15    0
-#define RSA_PKCS_V21    1
-
-#define RSA_SIGN        1
-#define RSA_CRYPT       2
-
-/*
- * DigestInfo ::= SEQUENCE {
- *   digestAlgorithm DigestAlgorithmIdentifier,
- *   digest Digest }
- *
- * DigestAlgorithmIdentifier ::= AlgorithmIdentifier
- *
- * Digest ::= OCTET STRING
- */
-#define ASN1_HASH_MDX                       \
-    "\x30\x20\x30\x0C\x06\x08\x2A\x86\x48"  \
-    "\x86\xF7\x0D\x02\x00\x05\x00\x04\x10"
-
-#define ASN1_HASH_SHA1                      \
-    "\x30\x21\x30\x09\x06\x05\x2B\x0E\x03"  \
-    "\x02\x1A\x05\x00\x04\x14"
-
-/**
- * \brief          RSA context structure
- */
-typedef struct
-{
-    int ver;                    /*!<  always 0          */
-    int len;                    /*!<  size(N) in chars  */
-
-    mpi N;                      /*!<  public modulus    */
-    mpi E;                      /*!<  public exponent   */
-
-    mpi D;                      /*!<  private exponent  */
-    mpi P;                      /*!<  1st prime factor  */
-    mpi Q;                      /*!<  2nd prime factor  */
-    mpi DP;                     /*!<  D % (P - 1)       */
-    mpi DQ;                     /*!<  D % (Q - 1)       */
-    mpi QP;                     /*!<  1 / (Q % P)       */
-
-    mpi RN;                     /*!<  cached R^2 mod N  */
-    mpi RP;                     /*!<  cached R^2 mod P  */
-    mpi RQ;                     /*!<  cached R^2 mod Q  */
-
-    int padding;                /*!<  1.5 or OAEP/PSS   */
-    int hash_id;                /*!<  hash identifier   */
-    int (*f_rng)(void *);       /*!<  RNG function      */
-    void *p_rng;                /*!<  RNG parameter     */
-}
-rsa_context;
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * \brief          Initialize an RSA context
- *
- * \param ctx      RSA context to be initialized
- * \param padding  RSA_PKCS_V15 or RSA_PKCS_V21
- * \param hash_id  RSA_PKCS_V21 hash identifier
- * \param f_rng    RNG function
- * \param p_rng    RNG parameter
- *
- * \note           The hash_id parameter is actually ignored
- *                 when using RSA_PKCS_V15 padding.
- *
- * \note           Currently (xyssl-0.8), RSA_PKCS_V21 padding
- *                 is not supported.
- */
-void rsa_init( rsa_context *ctx,
-               int padding,
-               int hash_id,
-               int (*f_rng)(void *),
-               void *p_rng );
-
-/**
- * \brief          Generate an RSA keypair
- *
- * \param ctx      RSA context that will hold the key
- * \param nbits    size of the public key in bits
- * \param exponent public exponent (e.g., 65537)
- *
- * \note           rsa_init() must be called beforehand to setup
- *                 the RSA context (especially f_rng and p_rng).
- *
- * \return         0 if successful, or an POLARSSL_ERR_RSA_XXX error code
- */
-int rsa_gen_key( rsa_context *ctx, int nbits, int exponent );
-
-/**
- * \brief          Check a public RSA key
- *
- * \param ctx      RSA context to be checked
- *
- * \return         0 if successful, or an POLARSSL_ERR_RSA_XXX error code
- */
-int rsa_check_pubkey( rsa_context *ctx );
-
-/**
- * \brief          Check a private RSA key
- *
- * \param ctx      RSA context to be checked
- *
- * \return         0 if successful, or an POLARSSL_ERR_RSA_XXX error code
- */
-int rsa_check_privkey( rsa_context *ctx );
-
-/**
- * \brief          Do an RSA public key operation
- *
- * \param ctx      RSA context
- * \param input    input buffer
- * \param output   output buffer
- *
- * \return         0 if successful, or an POLARSSL_ERR_RSA_XXX error code
- *
- * \note           This function does NOT take care of message
- *                 padding. Also, be sure to set input[0] = 0.
- *
- * \note           The input and output buffers must be large
- *                 enough (eg. 128 bytes if RSA-1024 is used).
- */
-int rsa_public( rsa_context *ctx,
-                unsigned char *input,
-                unsigned char *output );
-
-/**
- * \brief          Do an RSA private key operation
- *
- * \param ctx      RSA context
- * \param input    input buffer
- * \param output   output buffer
- *
- * \return         0 if successful, or an POLARSSL_ERR_RSA_XXX error code
- *
- * \note           The input and output buffers must be large
- *                 enough (eg. 128 bytes if RSA-1024 is used).
- */
-int rsa_private( rsa_context *ctx,
-                 unsigned char *input,
-                 unsigned char *output );
-
-/**
- * \brief          Add the message padding, then do an RSA operation
- *
- * \param ctx      RSA context
- * \param mode     RSA_PUBLIC or RSA_PRIVATE
- * \param ilen     contains the the plaintext length
- * \param input    buffer holding the data to be encrypted
- * \param output   buffer that will hold the ciphertext
- *
- * \return         0 if successful, or an POLARSSL_ERR_RSA_XXX error code
- *
- * \note           The output buffer must be as large as the size
- *                 of ctx->N (eg. 128 bytes if RSA-1024 is used).
- */
-int rsa_pkcs1_encrypt( rsa_context *ctx,
-                       int mode, int  ilen,
-                       unsigned char *input,
-                       unsigned char *output );
-
-/**
- * \brief          Do an RSA operation, then remove the message padding
- *
- * \param ctx      RSA context
- * \param mode     RSA_PUBLIC or RSA_PRIVATE
- * \param input    buffer holding the encrypted data
- * \param output   buffer that will hold the plaintext
- * \param olen     will contain the plaintext length
- * \param output_max_len	maximum length of the output buffer
- *
- * \return         0 if successful, or an POLARSSL_ERR_RSA_XXX error code
- *
- * \note           The output buffer must be as large as the size
- *                 of ctx->N (eg. 128 bytes if RSA-1024 is used) otherwise
- *                 an error is thrown.
- */
-int rsa_pkcs1_decrypt( rsa_context *ctx,
-                       int mode, int *olen,
-                       unsigned char *input,
-                       unsigned char *output,
-		       int output_max_len);
-
-/**
- * \brief          Do a private RSA to sign a message digest
- *
- * \param ctx      RSA context
- * \param mode     RSA_PUBLIC or RSA_PRIVATE
- * \param hash_id  RSA_RAW, RSA_MD{2,4,5} or RSA_SHA{1,256}
- * \param hashlen  message digest length (for RSA_RAW only)
- * \param hash     buffer holding the message digest
- * \param sig      buffer that will hold the ciphertext
- *
- * \return         0 if the signing operation was successful,
- *                 or an POLARSSL_ERR_RSA_XXX error code
- *
- * \note           The "sig" buffer must be as large as the size
- *                 of ctx->N (eg. 128 bytes if RSA-1024 is used).
- */
-int rsa_pkcs1_sign( rsa_context *ctx,
-                    int mode,
-                    int hash_id,
-                    int hashlen,
-                    unsigned char *hash,
-                    unsigned char *sig );
-
-/**
- * \brief          Do a public RSA and check the message digest
- *
- * \param ctx      points to an RSA public key
- * \param mode     RSA_PUBLIC or RSA_PRIVATE
- * \param hash_id  RSA_RAW, RSA_MD{2,4,5} or RSA_SHA{1,256}
- * \param hashlen  message digest length (for RSA_RAW only)
- * \param hash     buffer holding the message digest
- * \param sig      buffer holding the ciphertext
- *
- * \return         0 if the verify operation was successful,
- *                 or an POLARSSL_ERR_RSA_XXX error code
- *
- * \note           The "sig" buffer must be as large as the size
- *                 of ctx->N (eg. 128 bytes if RSA-1024 is used).
- */
-int rsa_pkcs1_verify( rsa_context *ctx,
-                      int mode,
-                      int hash_id,
-                      int hashlen,
-                      unsigned char *hash,
-                      unsigned char *sig );
-
-/**
- * \brief          Free the components of an RSA key
- */
-void rsa_free( rsa_context *ctx );
-
-/**
- * \brief          Checkup routine
- *
- * \return         0 if successful, or 1 if the test failed
- */
-int rsa_self_test( int verbose );
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* rsa.h */