Add strongswan (#1330)

SVN-Revision: 6429

6 files changed, 200 insertions, 0 deletions

diff --git a/package/strongswan/files/ipsec.button b/package/strongswan/files/ipsec.button
new file mode 100644
index 0000000..9bd9023
--- /dev/null
+++ b/package/strongswan/files/ipsec.button
@@ -0,0 +1,34 @@
+#!/bin/sh
+
+# snarf the code that loads the config values
+# since we also load the functions, might as well save the shell calls
+. /etc/init.d/ipsec
+
+[ -n "$IPSEC_RESET_BUTTON" -a "$BUTTON" = "$IPSEC_RESET_BUTTON" ] || exit
+
+if [ ! -e /var/run/pluto.pid ] ; then
+
+	[ "$ACTION" = "pressed" ] && start
+	
+else
+
+	if   [ "$ACTION" = "pressed"  ] ; then
+	
+		stop 
+		
+	elif [ "$ACTION" = "released" ] ; then
+
+		while [ -e /var/run/pluto.pid ] ; do
+			sleep 1
+		done
+
+		while ps auxww | grep ipsec | grep -v grep ; do
+			sleep 1
+		done
+
+		start
+		
+	fi
+	
+fi
+
diff --git a/package/strongswan/files/ipsec.conf b/package/strongswan/files/ipsec.conf
new file mode 100644
index 0000000..8f59008
--- /dev/null
+++ b/package/strongswan/files/ipsec.conf
@@ -0,0 +1,34 @@
+
+version 2.0
+
+config setup
+        interfaces=%defaultroute
+        nat_traversal=yes		# required on both ends
+        uniqueids=yes			# makes sense on client, not server
+        hidetos=no
+
+conn %default
+        authby=rsasig
+        keyingtries=3
+        keyexchange=ike
+        left=%defaultroute
+        leftrsasigkey=%cert
+        rightrsasigkey=%cert
+        dpdtimeout=30			# keepalive must arrive within
+        dpddelay=5			# secs before keepalives start
+        compress=no			# breaks double nat installations
+        pfs=yes
+
+conn sample
+        leftca=%same
+        leftcert=my.certificate.crt
+        leftsourceip=192.168.10.1
+        leftsubnet=192.168.10.0/24
+        right=my.vpn.concentrator.net.
+        rightca=%same
+        rightid="C=??, ST=??, O=??, OU=??, CN=my.vpn.concentrator.net, E=root@concentrator.net"
+        rightsourceip=192.168.11.1
+        rightsubnet=192.168.11.0/24
+        dpdaction=hold
+        auto=start
+
diff --git a/package/strongswan/files/ipsec.config b/package/strongswan/files/ipsec.config
new file mode 100644
index 0000000..b4865e4
--- /dev/null
+++ b/package/strongswan/files/ipsec.config
@@ -0,0 +1,21 @@
+
+# Configure button/light behavior here.
+config device
+	option reset_button	ses
+	option status_start	ses_orange
+	option status_valid	ses_white
+
+# iptables setup for traffic to/from this host
+config filter
+	option rule_in		input_rule
+	option dest_in		ACCEPT
+	option rule_out		output_rule
+	option dest_out		ACCEPT
+
+# iptables setup for traffic to/from another host
+config forward
+	option rule_in		forwarding_rule
+	option dest_in		forwarding_vpn_in
+	option rule_out		forwarding_rule
+	option dest_out		forwarding_vpn_out
+
diff --git a/package/strongswan/files/ipsec.cron b/package/strongswan/files/ipsec.cron
new file mode 100644
index 0000000..d8c7dcc
--- /dev/null
+++ b/package/strongswan/files/ipsec.cron
@@ -0,0 +1,2 @@
+#!/bin/sh
+/usr/sbin/ipsec wakeup
diff --git a/package/strongswan/files/ipsec.iface b/package/strongswan/files/ipsec.iface
new file mode 100644
index 0000000..95e0958
--- /dev/null
+++ b/package/strongswan/files/ipsec.iface
@@ -0,0 +1,8 @@
+NAME=ipsec
+CTLFILE="/var/run/pluto.ctl"
+
+[ "$ACTION" = "ifup" -a "$INTERFACE" = "wan" ] || exit
+
+[ -e "$CTLFILE" ] || exit
+
+/etc/init.d/ipsec restart
diff --git a/package/strongswan/files/ipsec.init b/package/strongswan/files/ipsec.init
new file mode 100644
index 0000000..4e8b8a2
--- /dev/null
+++ b/package/strongswan/files/ipsec.init
@@ -0,0 +1,101 @@
+#!/bin/sh /etc/rc.common
+
+START=65
+
+config_cb() {
+	local cfg="$CONFIG_SECTION"
+	local cfgt
+	config_get cfgt "$cfg" TYPE
+
+	case "$cfgt" in
+		device)
+			config_get IPSEC_RESET_BUTTON		$cfg reset_button
+			config_get IPSEC_STATUS_LED_START	$cfg status_start
+			config_get IPSEC_STATUS_LED_VALID	$cfg status_valid
+			;;
+		filter)
+			config_get IPSEC_UPDOWN_RULE_IN		$cfg rule_in
+			config_get IPSEC_UPDOWN_DEST_IN		$cfg dest_in
+			config_get IPSEC_UPDOWN_RULE_OUT	$cfg rule_out
+			config_get IPSEC_UPDOWN_DEST_OUT	$cfg dest_out
+			;;
+		forward)
+			config_get IPSEC_UPDOWN_FWD_RULE_IN	$cfg rule_in
+			config_get IPSEC_UPDOWN_FWD_DEST_IN	$cfg dest_in
+			config_get IPSEC_UPDOWN_FWD_RULE_OUT	$cfg rule_out
+			config_get IPSEC_UPDOWN_FWD_DEST_OUT	$cfg dest_out
+			;;
+		*)
+			;;
+	esac
+}
+
+config_load ipsec
+
+export IPSEC_RESET_BUTTON
+export IPSEC_STATUS_LED_START
+export IPSEC_STATUS_LED_VALID
+
+export IPSEC_UPDOWN_RULE_IN
+export IPSEC_UPDOWN_DEST_IN
+export IPSEC_UPDOWN_RULE_OUT
+export IPSEC_UPDOWN_DEST_OUT
+
+export IPSEC_UPDOWN_FWD_RULE_IN
+export IPSEC_UPDOWN_FWD_DEST_IN
+export IPSEC_UPDOWN_FWD_RULE_OUT
+export IPSEC_UPDOWN_FWD_DEST_OUT
+
+
+start() {
+
+	[ -f /etc/ipsec.conf      ] || exit
+	[ -e /var/run/starter.pid ] && exit
+
+	/usr/sbin/ipsec _showstatus start
+	
+	# stuff the dnsmasq cache in case dns is on our own subnet
+	for peer in `grep left= /etc/ipsec.conf | \
+				cut -f 1 -d% | cut -f 2 -d=` ; do
+		ping -c 1 $peer > /dev/null 2>&1
+	done
+	
+	/usr/sbin/ipsec start || exit
+	
+	# work around broken routing behavior:
+	# a route to the local wan segment will appear
+	# the need was removed in the patched _updown script
+
+	while ! route -n | grep -q ipsec ; do sleep 1 ; done
+
+	defint=`route -n | awk '/^0.0.0.0/{print $8}'`
+	defnet=`route -n | grep $defint | awk  '!/^0.0.0.0/{print $1}'`
+	dnmask=`route -n | grep $defint | awk  '!/^0.0.0.0/{print $3}'`
+	tundev=`route -n | grep $defnet | awk '/ipsec/{print $8}'`
+	
+	route del -net $defnet netmask $dnmask dev $tundev
+}
+
+
+stop() {
+
+	/usr/sbin/ipsec stop 2> /dev/null
+
+	# wait until the shutdown actually happens
+	while [ -e /var/run/starter.pid ] ; do
+		if [ -d /proc/`cat /var/run/starter.pid` ] ; then
+			sleep 1
+		else
+			rm /var/run/starter.pid
+		fi
+	done
+
+	# kill any lingering processes
+	while ps auxww | grep -q ipsec | grep -v init.d; do
+		kill `ps auxww | grep -v init.d | awk '/\/ipsec\//{print $1}'` 2> /dev/null
+		sleep 1
+	done
+
+ 	ipsec _showstatus stop
+}
+