add diag and switch support for brcm47xx-2.6

SVN-Revision: 6562

3 files changed, 106 insertions, 55 deletions

diff --git a/package/switch/src/gpio-bcm947xx.h b/package/switch/src/gpio-bcm947xx.h
new file mode 100644
index 0000000..384ea3e
--- /dev/null
+++ b/package/switch/src/gpio-bcm947xx.h
@@ -0,0 +1,86 @@
+#ifndef __SWITCH_GPIO_H
+#define __SWITCH_GPIO_H
+#include <linux/interrupt.h>
+
+#ifndef BCMDRIVER
+#include <linux/ssb/ssb.h>
+#include <linux/ssb/ssb_driver_chipcommon.h>
+#include <linux/ssb/ssb_driver_extif.h>
+
+extern struct ssb_bus ssb;
+
+#define gpio_op(op, param...) \
+	do { \
+		if (ssb.chipco.dev) \
+			return ssb_chipco_gpio_##op(&ssb.chipco, param); \
+		else if (ssb.extif.dev) \
+			return ssb_extif_gpio_##op(&ssb.extif, param); \
+		else \
+			return 0; \
+	} while (0);
+		
+
+static inline u32 gpio_in(void)
+{
+	gpio_op(in, ~0);
+}
+
+static inline u32 gpio_out(u32 mask, u32 value)
+{
+	gpio_op(out, mask, value);
+}
+
+static inline u32 gpio_outen(u32 mask, u32 value)
+{
+	gpio_op(outen, mask, value);
+}
+
+static inline u32 gpio_control(u32 mask, u32 value)
+{
+	if (ssb.chipco.dev)
+		return ssb_chipco_gpio_control(&ssb.chipco, mask, value);
+	else
+		return 0;
+}
+
+static inline u32 gpio_intmask(u32 mask, u32 value)
+{
+	gpio_op(intmask, mask, value);
+}
+
+static inline u32 gpio_intpolarity(u32 mask, u32 value)
+{
+	gpio_op(polarity, mask, value);
+}
+
+#else
+
+#include <typedefs.h>
+#include <osl.h>
+#include <bcmdevs.h>
+#include <sbutils.h>
+#include <sbconfig.h>
+#include <sbchipc.h>
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+#include <sbmips.h>
+#else
+#include <hndcpu.h>
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
+#define sbh bcm947xx_sbh
+#define sbh_lock bcm947xx_sbh_lock
+#endif
+
+extern void *sbh;
+extern spinlock_t sbh_lock;
+
+#define gpio_in()	sb_gpioin(sbh)
+#define gpio_out(mask, value) 	sb_gpioout(sbh, mask, ((value) & (mask)), GPIO_DRV_PRIORITY)
+#define gpio_outen(mask, value) 	sb_gpioouten(sbh, mask, value, GPIO_DRV_PRIORITY)
+#define gpio_control(mask, value) 	sb_gpiocontrol(sbh, mask, value, GPIO_DRV_PRIORITY)
+#define gpio_intmask(mask, value) 	sb_gpiointmask(sbh, mask, value, GPIO_DRV_PRIORITY)
+#define gpio_intpolarity(mask, value) 	sb_gpiointpolarity(sbh, mask, value, GPIO_DRV_PRIORITY)
+
+#endif /* BCMDRIVER */
+#endif /* __SWITCH_GPIO_H */
diff --git a/package/switch/src/gpio.h b/package/switch/src/gpio.h
index 800ae25..f4fadfc 100644
--- a/package/switch/src/gpio.h
+++ b/package/switch/src/gpio.h
@@ -8,45 +8,10 @@
 #ifndef __GPIO_H
 #define __GPIO_H
 
-#if defined(BCMGPIO2)
-
-#ifdef LINUX_2_4
-#define sbh bcm947xx_sbh
-extern void *bcm947xx_sbh;
-#else
-extern void *sbh;
-#endif
-
-extern __u32 sb_gpioin(void *sbh);
-extern __u32 sb_gpiointpolarity(void *sbh, __u32 mask, __u32 val, __u8 prio);
-extern __u32 sb_gpiointmask(void *sbh, __u32 mask, __u32 val, __u8 prio);
-extern __u32 sb_gpioouten(void *sbh, __u32 mask, __u32 val, __u8 prio);
-extern __u32 sb_gpioout(void *sbh, __u32 mask, __u32 val, __u8 prio);
-
-#define gpioin() sb_gpioin(sbh)
-#define gpiointpolarity(mask,val) sb_gpiointpolarity(sbh, mask, val, 0)
-#define gpiointmask(mask,val) sb_gpiointmask(sbh, mask, val, 0)
-#define gpioouten(mask,val) sb_gpioouten(sbh, mask, val, 0)
-#define gpioout(mask,val) sb_gpioout(sbh, mask, val, 0)
-
-#elif defined(BCMGPIO)
-
-#define sbh bcm947xx_sbh
-extern void *bcm947xx_sbh;
-extern __u32 sb_gpioin(void *sbh);
-extern __u32 sb_gpiointpolarity(void *sbh, __u32 mask, __u32 val);
-extern __u32 sb_gpiointmask(void *sbh, __u32 mask, __u32 val);
-extern __u32 sb_gpioouten(void *sbh, __u32 mask, __u32 val);
-extern __u32 sb_gpioout(void *sbh, __u32 mask, __u32 val);
-
-#define gpioin() sb_gpioin(sbh)
-#define gpiointpolarity(mask,val) sb_gpiointpolarity(sbh, mask, val)
-#define gpiointmask(mask,val) sb_gpiointmask(sbh, mask, val)
-#define gpioouten(mask,val) sb_gpioouten(sbh, mask, val)
-#define gpioout(mask,val) sb_gpioout(sbh, mask, val)
-
+#ifdef BROADCOM
+#include "gpio-bcm947xx.h"
 #else
-#error Unsupported/unknown GPIO configuration
+#error "Unsupported configuration."
 #endif
 
 #endif /* __GPIO_H */
diff --git a/package/switch/src/switch-adm.c b/package/switch/src/switch-adm.c
index 85805f6..8d96316 100644
--- a/package/switch/src/switch-adm.c
+++ b/package/switch/src/switch-adm.c
@@ -109,7 +109,7 @@ static void adm_write(int cs, char *buf, unsigned int bits)
 	int i, len = (bits + 7) / 8;
 	__u8 mask;
 
-	gpioout(eecs, (cs ? eecs : 0));
+	gpio_out(eecs, (cs ? eecs : 0));
 	udelay(EECK_EDGE_TIME);
 
 	/* Byte assemble from MSB to LSB */
@@ -117,25 +117,25 @@ static void adm_write(int cs, char *buf, unsigned int bits)
 		/* Bit bang from MSB to LSB */
 		for (mask = 0x80; mask && bits > 0; mask >>= 1, bits --) {
 			/* Clock low */
-			gpioout(eesk, 0);
+			gpio_out(eesk, 0);
 			udelay(EECK_EDGE_TIME);
 
 			/* Output on rising edge */
-			gpioout(eedi, ((mask & buf[i]) ? eedi : 0));
+			gpio_out(eedi, ((mask & buf[i]) ? eedi : 0));
 			udelay(EEDI_SETUP_TIME);
 
 			/* Clock high */
-			gpioout(eesk, eesk);
+			gpio_out(eesk, eesk);
 			udelay(EECK_EDGE_TIME);
 		}
 	}
 
 	/* Clock low */
-	gpioout(eesk, 0);
+	gpio_out(eesk, 0);
 	udelay(EECK_EDGE_TIME);
 
 	if (cs)
-		gpioout(eecs, 0);
+		gpio_out(eecs, 0);
 }
 
 
@@ -144,7 +144,7 @@ static void adm_read(int cs, char *buf, unsigned int bits)
 	int i, len = (bits + 7) / 8;
 	__u8 mask;
 
-	gpioout(eecs, (cs ? eecs : 0));
+	gpio_out(eecs, (cs ? eecs : 0));
 	udelay(EECK_EDGE_TIME);
 
 	/* Byte assemble from MSB to LSB */
@@ -156,16 +156,16 @@ static void adm_read(int cs, char *buf, unsigned int bits)
 			__u8 gp;
 
 			/* Clock low */
-			gpioout(eesk, 0);
+			gpio_out(eesk, 0);
 			udelay(EECK_EDGE_TIME);
 
 			/* Input on rising edge */
-			gp = gpioin();
+			gp = gpio_in();
 			if (gp & eedi)
 				byte |= mask;
 
 			/* Clock high */
-			gpioout(eesk, eesk);
+			gpio_out(eesk, eesk);
 			udelay(EECK_EDGE_TIME);
 		}
 
@@ -173,11 +173,11 @@ static void adm_read(int cs, char *buf, unsigned int bits)
 	}
 
 	/* Clock low */
-	gpioout(eesk, 0);
+	gpio_out(eesk, 0);
 	udelay(EECK_EDGE_TIME);
 
 	if (cs)
-		gpioout(eecs, 0);
+		gpio_out(eecs, 0);
 }
 
 
@@ -185,10 +185,10 @@ static void adm_read(int cs, char *buf, unsigned int bits)
 static void adm_enout(__u8 pins, __u8 val)
 {   
 	/* Prepare GPIO output value */
-	gpioout(pins, val);
+	gpio_out(pins, val);
 	
 	/* Enable GPIO outputs */
-	gpioouten(pins, pins);
+	gpio_outen(pins, pins);
 	udelay(EECK_EDGE_TIME);
 }
 
@@ -197,7 +197,7 @@ static void adm_enout(__u8 pins, __u8 val)
 static void adm_disout(__u8 pins)
 {   
 	/* Disable GPIO outputs */
-	gpioouten(pins, 0);
+	gpio_outen(pins, 0);
 	udelay(EECK_EDGE_TIME);
 }
 
@@ -208,11 +208,11 @@ static void adm_adclk(int clocks)
 	int i;
 	for (i = 0; i < clocks; i++) {
 		/* Clock high */
-		gpioout(eesk, eesk);
+		gpio_out(eesk, eesk);
 		udelay(EECK_EDGE_TIME);
 
 		/* Clock low */
-		gpioout(eesk, 0);
+		gpio_out(eesk, 0);
 		udelay(EECK_EDGE_TIME);
 	}
 }