add uboot-lantiq (based on a patch contributed by Lantiq)

SVN-Revision: 20561

33 files changed, 5903 insertions, 0 deletions

diff --git a/package/uboot-lantiq/Makefile b/package/uboot-lantiq/Makefile
new file mode 100644
index 0000000..fb9b668
--- /dev/null
+++ b/package/uboot-lantiq/Makefile
@@ -0,0 +1,82 @@
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=u-boot
+PKG_VERSION:=2009.11.1
+PKG_MD5SUM:=6086421c9e2f3a0d0dbc5f706b551dbc
+PKG_RELEASE:=1
+
+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
+PKG_SOURCE_URL:=ftp://ftp.denx.de/pub/u-boot
+PKG_TARGETS:=bin
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/uboot-lantiq
+  SECTION:=boot
+  CATEGORY:=Boot Loaders
+  DEPENDS:=@TARGET_ifxmips
+  TITLE:=U-Boot for Lantiq reference boards
+  URL:=http://www.denx.de/wiki/UBoot/WebHome
+endef
+
+define Build/Prepare
+	$(PKG_UNPACK)
+	cp -r $(CP_OPTS) $(FILES_DIR)/* $(PKG_BUILD_DIR)/
+	$(Build/Patch)
+	find $(PKG_BUILD_DIR) -name .svn | $(XARGS) rm -rf
+endef
+
+UBOOT_CONFIG:=easy50712_DDR166M
+UBOOT_MAKE_OPTS:= \
+	CROSS_COMPILE=$(TARGET_CROSS) \
+	ENDIANNESS= \
+	V=1
+
+define Build/Configure/Target
+	$(MAKE) -s -C $(PKG_BUILD_DIR) \
+		$(UBOOT_MAKE_OPTS) \
+		O=$(PKG_BUILD_DIR)/$(1) \
+		$(1)_config
+endef
+
+define Build/Configure
+	$(call Build/Configure/Target,$(UBOOT_CONFIG))
+	$(call Build/Configure/Target,$(UBOOT_CONFIG)_ramboot)
+endef
+
+define Build/Compile/Target
+	$(MAKE) -s -C $(PKG_BUILD_DIR) \
+		$(UBOOT_MAKE_OPTS) \
+		O=$(PKG_BUILD_DIR)/$(1) \
+		all
+endef
+
+define Build/Compile
+	$(call Build/Compile/Target,$(UBOOT_CONFIG))
+	$(call Build/Compile/Target,$(UBOOT_CONFIG)_ramboot)
+endef
+
+define Package/uboot-lantiq/install
+	mkdir -p $(1)/$(UBOOT_CONFIG)
+	dd \
+		if=$(PKG_BUILD_DIR)/$(UBOOT_CONFIG)/u-boot.bin \
+		of=$(1)/$(UBOOT_CONFIG)/u-boot.bin \
+		bs=64k conv=sync
+	if [ -e $(UBOOT_CONFIG).conf ]; then \
+		perl ./gct \
+			$(UBOOT_CONFIG).conf \
+			$(PKG_BUILD_DIR)/$(UBOOT_CONFIG)_ramboot/u-boot.srec \
+			$(1)/$(UBOOT_CONFIG)/u-boot.asc; \
+	fi
+endef
+
+$(eval $(call BuildPackage,uboot-lantiq))
diff --git a/package/uboot-lantiq/easy50712_DDR166M.conf b/package/uboot-lantiq/easy50712_DDR166M.conf
new file mode 100644
index 0000000..351d6a1
--- /dev/null
+++ b/package/uboot-lantiq/easy50712_DDR166M.conf
@@ -0,0 +1,134 @@
+ 0xbf800060  0x7
+ 0xbf800010  0x0
+ 0xbf800020  0x0
+ 0xbf800200  0x02
+ 0xbf800210  0x0
+
+;REG32(MC_DC0) = 0x00001B1B;
+ 0xbf801000  0x1b1b
+;REG32(MC_DC1) = 0x00000000;
+ 0xbf801010  0x0
+;REG32(MC_DC2) = 0x00000000;
+ 0xbf801020  0x0
+;REG32(MC_DC3) = 0x00000000;
+ 0xbf801030  0x0
+;REG32(MC_DC4) = 0x00000000;
+ 0xbf801040  0x0
+;REG32(MC_DC5) = 0x00000200;
+ 0xbf801050  0x200
+;REG32(MC_DC6) = 0x00000306;
+; 0xbf801060  0x0306
+ 0xbf801060  0x0605
+;REG32(MC_DC7) = 0x00000303;
+ 0xbf801070  0x302
+; 0xbf801070  0x0203
+;REG32(MC_DC8) = 0x00000102;
+ 0xbf801080  0x102
+;REG32(MC_DC9) = 0x0000070A;
+ 0xbf801090  0x70a
+; 0xbf801090  0x608
+;REG32(MC_DC10) = 0x00000203;
+ 0xbf8010a0  0x203
+;REG32(MC_DC11) = 0x00000C02;
+ 0xbf8010b0  0xc02
+; 0xbf8010b0  0x0a02
+;REG32(MC_DC12) = 0x000001C8;
+ 0xbf8010c0  0x1c8
+;REG32(MC_DC13) = 0x00000001;
+ 0xbf8010d0  0x1
+;REG32(MC_DC14) = 0x00000000;
+ 0xbf8010e0  0x0
+;REG32(MC_DC15) = 0x00000F5F;
+; 0xbf8010f0  0xf5f
+ 0xbf8010f0  0xf3c
+;REG32(MC_DC16) = 0x0000C800;
+ 0xbf801100  0xc800
+;REG32(MC_DC17) = 0x0000000D; 
+; 0xbf801110  0xd
+ 0xbf801110  0xd
+;REG32(MC_DC18) = 0x00000300;
+ 0xbf801120  0x300
+;REG32(MC_DC19) = 0x00000300;
+; 0xbf801130  0x300
+ 0xbf801130  0x200
+;REG32(MC_DC20) = 0x00000A04;
+; 0xbf801140  0xa04
+ 0xbf801140  0xa04
+;REG32(MC_DC21) = 0x00001c00;
+ 0xbf801150  0xd00
+; 0xbf801150  0x1f00
+;REG32(MC_DC22) = 0x00001E1E;
+ 0xbf801160  0xd0d
+; 0xbf801160  0x1f1f
+;REG32(MC_DC23) = 0x00000000;
+ 0xbf801170  0x0
+;//Disable ECC
+;REG32(MC_DC24) = 0x0000007F;
+; 0xbf801180  0x7f
+ 0xbf801180  0x062
+; 0xbf801180  0x37f
+;REG32(MC_DC25) = 0x00000000;
+ 0xbf801190  0x0
+;REG32(MC_DC26) = 0x00000000;
+ 0xbf8011a0  0x0
+;REG32(MC_DC27) = 0x00000000;
+ 0xbf8011b0  0x0
+;REG32(MC_DC28) = 0x00000A24;
+; 0xbf8011c0  0xa24
+ 0xbf8011c0  0x510
+;REG32(MC_DC29) = 0x00002D89;
+ 0xbf8011d0  0x2d89
+; 0xbf8011d0  0x2d92
+;REG32(MC_DC30) = 0x00000022;
+ 0xbf8011e0  0x8300
+; 0xbf8011e0  0x8235
+;REG32(MC_DC31) = 0x00000000;
+ 0xbf8011f0  0x0
+;REG32(MC_DC32) = 0x00000000;
+ 0xbf801200  0x0
+;REG32(MC_DC33) = 0x00000000;
+ 0xbf801210  0x0
+;REG32(MC_DC34) = 0x00000000;
+ 0xbf801220  0x0
+;REG32(MC_DC35) = 0x00000000;
+ 0xbf801230  0x0
+;REG32(MC_DC36) = 0x00000000;
+ 0xbf801240  0x0
+;REG32(MC_DC37) = 0x00000000;
+ 0xbf801250  0x0
+;REG32(MC_DC38) = 0x00000000;
+ 0xbf801260  0x0
+;REG32(MC_DC39) = 0x00000000;
+ 0xbf801270  0x0
+;REG32(MC_DC40) = 0x00000000;
+ 0xbf801280  0x0
+;REG32(MC_DC41) = 0x00000000;
+ 0xbf801290  0x0
+;REG32(MC_DC42) = 0x00000000;
+ 0xbf8012a0  0x0
+;REG32(MC_DC43) = 0x00000000;
+ 0xbf8012b0  0x0
+;REG32(MC_DC44) = 0x00000000;
+ 0xbf8012c0  0x0
+;REG32(MC_DC45) = 0x00000600;
+ 0xbf8012d0  0x500
+;REG32(MC_DC46) = 0x00000000;
+ 0xbf8012e0  0x0
+
+ 0xbf800060  0x05
+ 0xbf801030  0x100
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/Makefile b/package/uboot-lantiq/files/board/infineon/easy50712/Makefile
new file mode 100644
index 0000000..b57ff19
--- /dev/null
+++ b/package/uboot-lantiq/files/board/infineon/easy50712/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+#COBJS	:= $(BOARD).o
+COBJS-y	+= danube.o
+
+SOBJS	= lowlevel_init.o pmuenable.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/config.mk b/package/uboot-lantiq/files/board/infineon/easy50712/config.mk
new file mode 100644
index 0000000..c0e5d82
--- /dev/null
+++ b/package/uboot-lantiq/files/board/infineon/easy50712/config.mk
@@ -0,0 +1,60 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Danube board with MIPS 24Kc CPU core
+#
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifdef CONFIG_LZMA_BOOTSTRAP
+
+ifdef BUILD_BOOTSTRAP
+
+$(info BUILD_BOOTSTRAP )
+#TEXT_BASE = 0xB0000000
+TEXT_BASE = 0x80010000
+
+else # BUILD_BOOTSTRAP
+
+ifndef TEXT_BASE
+$(info redefine TEXT_BASE = 0x80040000 )
+TEXT_BASE = 0x80040000
+endif
+
+endif # BUILD_BOOTSTRAP
+
+else
+
+ifdef BUILD_BOOTSTRAP
+$(error BUILD_BOOTSTRAP but not enabled in config)
+endif
+
+ifndef TEXT_BASE
+## Standard: boot from ebu
+$(info redefine TEXT_BASE = 0xB0000000 )
+TEXT_BASE = 0xB0000000
+## For testing: boot from RAM
+# TEXT_BASE = 0x80100000
+endif
+
+endif # CONFIG_LZMA_BOOTSTRAP
diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/danube.c b/package/uboot-lantiq/files/board/infineon/easy50712/danube.c
new file mode 100644
index 0000000..4734366
--- /dev/null
+++ b/package/uboot-lantiq/files/board/infineon/easy50712/danube.c
@@ -0,0 +1,338 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2010
+ * Thomas Langer, Ralph Hempel
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <miiphy.h>
+#include <asm/addrspace.h>
+#include <asm/danube.h>
+#include <asm/reboot.h>
+#include <asm/io.h>
+
+extern ulong ifx_get_ddr_hz(void);
+extern ulong ifx_get_cpuclk(void);
+
+/* definitions for external PHYs / Switches */
+/* Split values into phy address and register address */
+#define PHYADDR(_reg)	((_reg >> 5) & 0xff), (_reg & 0x1f)
+
+/* IDs and registers of known external switches */
+#define ID_SAMURAI_0	0x1020
+#define ID_SAMURAI_1	0x0007
+#define SAMURAI_ID_REG0	0xA0
+#define SAMURAI_ID_REG1	0xA1
+
+#define ID_TANTOS	0x2599
+
+void _machine_restart(void)
+{
+	*DANUBE_RCU_RST_REQ |=1<<30;
+}
+
+#ifdef CONFIG_SYS_RAMBOOT
+phys_size_t initdram(int board_type)
+{
+	return get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM);
+}
+#elif defined(CONFIG_USE_DDR_RAM)
+phys_size_t initdram(int board_type)
+{
+	return (CONFIG_SYS_MAX_RAM);
+}
+#else
+
+static ulong max_sdram_size(void)     /* per Chip Select */
+{
+	/* The only supported SDRAM data width is 16bit.
+	 */
+#define CFG_DW	4
+
+	/* The only supported number of SDRAM banks is 4.
+	 */
+#define CFG_NB	4
+
+	ulong cfgpb0 = *DANUBE_SDRAM_MC_CFGPB0;
+	int   cols   = cfgpb0 & 0xF;
+	int   rows   = (cfgpb0 & 0xF0) >> 4;
+	ulong size   = (1 << (rows + cols)) * CFG_DW * CFG_NB;
+
+	return size;
+}
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'.
+ */
+
+static long int dram_size(long int *base, long int maxsize)
+{
+	volatile long int *addr;
+	ulong cnt, val;
+	ulong save[32];			/* to make test non-destructive */
+	unsigned char i = 0;
+
+	for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		save[i++] = *addr;
+		*addr = ~cnt;
+	}
+
+	/* write 0 to base address */
+	addr = base;
+	save[i] = *addr;
+	*addr = 0;
+
+	/* check at base address */
+	if ((val = *addr) != 0) {
+		*addr = save[i];
+		return (0);
+	}
+
+	for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		val = *addr;
+		*addr = save[--i];
+
+		if (val != (~cnt)) {
+			return (cnt * sizeof (long));
+		}
+	}
+	return (maxsize);
+}
+
+phys_size_t initdram(int board_type)
+{
+	int   rows, cols, best_val = *DANUBE_SDRAM_MC_CFGPB0;
+	ulong size, max_size       = 0;
+	ulong our_address;
+
+	/* load t9 into our_address */
+	asm volatile ("move %0, $25" : "=r" (our_address) :);
+
+	/* Can't probe for RAM size unless we are running from Flash.
+	 * find out whether running from DRAM or Flash.
+	 */
+	if (CPHYSADDR(our_address) < CPHYSADDR(PHYS_FLASH_1))
+	{
+		return max_sdram_size();
+	}
+
+	for (cols = 0x8; cols <= 0xC; cols++)
+	{
+		for (rows = 0xB; rows <= 0xD; rows++)
+		{
+			*DANUBE_SDRAM_MC_CFGPB0 = (0x14 << 8) |
+			                          (rows << 4) | cols;
+			size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
+			                          max_sdram_size());
+
+			if (size > max_size)
+			{
+				best_val = *DANUBE_SDRAM_MC_CFGPB0;
+				max_size = size;
+			}
+		}
+	}
+
+	*DANUBE_SDRAM_MC_CFGPB0 = best_val;
+	return max_size;
+}
+#endif
+
+int checkboard (void)
+{
+	unsigned long chipid = *DANUBE_MPS_CHIPID;
+	int part_num;
+
+	puts ("Board: ");
+
+	part_num = DANUBE_MPS_CHIPID_PARTNUM_GET(chipid);
+	switch (part_num)
+	{
+	case 0x129:
+	case 0x12D:
+		puts("Danube/Twinpass/Vinax-VE ");
+		break;
+	default:
+		printf ("unknown, chip part number 0x%03X ", part_num);
+		break;
+	}
+	printf ("V1.%ld, ", DANUBE_MPS_CHIPID_VERSION_GET(chipid));
+
+	printf("DDR Speed %ld MHz, ", ifx_get_ddr_hz()/1000000);
+	printf("CPU Speed %ld MHz\n", ifx_get_cpuclk()/1000000);
+
+	return 0;
+}
+
+#ifdef CONFIG_SKIP_LOWLEVEL_INIT
+int board_early_init_f(void)
+{
+#ifdef CONFIG_EBU_ADDSEL0
+	(*DANUBE_EBU_ADDSEL0) = CONFIG_EBU_ADDSEL0;
+#endif
+#ifdef CONFIG_EBU_ADDSEL1
+	(*DANUBE_EBU_ADDSEL1) = CONFIG_EBU_ADDSEL1;
+#endif
+#ifdef CONFIG_EBU_ADDSEL2
+	(*DANUBE_EBU_ADDSEL2) = CONFIG_EBU_ADDSEL2;
+#endif
+#ifdef CONFIG_EBU_ADDSEL3
+	(*DANUBE_EBU_ADDSEL3) = CONFIG_EBU_ADDSEL3;
+#endif
+#ifdef CONFIG_EBU_BUSCON0
+	(*DANUBE_EBU_BUSCON0) = CONFIG_EBU_BUSCON0;
+#endif
+#ifdef CONFIG_EBU_BUSCON1
+	(*DANUBE_EBU_BUSCON1) = CONFIG_EBU_BUSCON1;
+#endif
+#ifdef CONFIG_EBU_BUSCON2
+	(*DANUBE_EBU_BUSCON2) = CONFIG_EBU_BUSCON2;
+#endif
+#ifdef CONFIG_EBU_BUSCON3
+	(*DANUBE_EBU_BUSCON3) = CONFIG_EBU_BUSCON3;
+#endif
+
+	return 0;
+}
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
+
+#ifdef CONFIG_EXTRA_SWITCH
+static int external_switch_init(void)
+{
+	unsigned short chipid0=0xdead, chipid1=0xbeef;
+	static char * const name = "lq_cpe_eth";
+
+#ifdef CLK_OUT2_25MHZ
+	*DANUBE_GPIO_P0_DIR=0x0000ae78;
+	*DANUBE_GPIO_P0_ALTSEL0=0x00008078;
+	//joelin for Mii-1       *DANUBE_GPIO_P0_ALTSEL1=0x80000080;
+	*DANUBE_GPIO_P0_ALTSEL1=0x80000000; //joelin for Mii-1
+	*DANUBE_CGU_IFCCR=0x00400010;
+	*DANUBE_GPIO_P0_OD=0x0000ae78;
+#endif
+
+	/* earlier no valid response is available, at least on Twinpass & Tantos @ 111MHz, M4530 platform */
+	udelay(100000);
+
+	debug("\nsearching for Samurai switch ... ");
+	if ( (miiphy_read(name, PHYADDR(SAMURAI_ID_REG0), &chipid0)==0) &&
+	     (miiphy_read(name, PHYADDR(SAMURAI_ID_REG1), &chipid1)==0) ) {
+		if (((chipid0 & 0xFFF0) == ID_SAMURAI_0) &&
+		    ((chipid1 & 0x000F) == ID_SAMURAI_1)) {
+			debug("found");
+
+			/* enable "Crossover Auto Detect" + defaults */
+			/* P0 */
+			miiphy_write(name, PHYADDR(0x01), 0x840F);
+			/* P1 */
+			miiphy_write(name, PHYADDR(0x03), 0x840F);
+			/* P2 */
+			miiphy_write(name, PHYADDR(0x05), 0x840F);
+			/* P3 */
+			miiphy_write(name, PHYADDR(0x07), 0x840F);
+			/* P4 */
+			miiphy_write(name, PHYADDR(0x08), 0x840F);
+			/* P5 */
+			miiphy_write(name, PHYADDR(0x09), 0x840F);
+			/* System Control 4: CPU on port 1 and other */
+			miiphy_write(name, PHYADDR(0x12), 0x3602);
+			#ifdef CLK_OUT2_25MHZ
+			/* Bandwidth Control Enable Register: enable */
+			miiphy_write(name, PHYADDR(0x33), 0x4000);
+			#endif
+		}
+	}
+
+	debug("\nsearching for TANTOS switch ... ");
+	if (miiphy_read(name, PHYADDR(0x101), &chipid0) == 0) {
+		if (chipid0 == ID_TANTOS) {
+			debug("found");
+
+			/* P5 Basic Control: Force Link Up */
+			miiphy_write(name, PHYADDR(0xA1), 0x0004);
+			/* P6 Basic Control: Force Link Up */
+			miiphy_write(name, PHYADDR(0xC1), 0x0004);
+			/* RGMII/MII Port Control (P4/5/6) */
+			miiphy_write(name, PHYADDR(0xF5), 0x0773);
+
+			/* Software workaround. */
+			/* PHY reset from P0 to P4. */
+
+			/* set data for indirect write */
+			miiphy_write(name, PHYADDR(0x121), 0x8000);
+
+			/* P0 */
+			miiphy_write(name, PHYADDR(0x120), 0x0400);
+			udelay(1000);
+			/* P1 */
+			miiphy_write(name, PHYADDR(0x120), 0x0420);
+			udelay(1000);
+			/* P2 */
+			miiphy_write(name, PHYADDR(0x120), 0x0440);
+			udelay(1000);
+			/* P3 */
+			miiphy_write(name, PHYADDR(0x120), 0x0460);
+			udelay(1000);
+			/* P4 */
+			miiphy_write(name, PHYADDR(0x120), 0x0480);
+			udelay(1000);
+		}
+	}
+	debug("\n");
+
+	return 0;
+}
+#endif /* CONFIG_EXTRA_SWITCH */
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_IFX_ETOP)
+
+	*DANUBE_PMU_PWDCR &= 0xFFFFEFDF;
+	*DANUBE_PMU_PWDCR &=~(1<<DANUBE_PMU_DMA_SHIFT);/*enable DMA from PMU*/
+
+	if (lq_eth_initialize(bis)<0)
+		return -1;
+
+	*DANUBE_RCU_RST_REQ |=1;
+	udelay(200000);
+	*DANUBE_RCU_RST_REQ &=(unsigned long)~1;
+	udelay(1000);
+
+#ifdef CONFIG_EXTRA_SWITCH
+	if (external_switch_init()<0)
+		return -1;
+#endif /* CONFIG_EXTRA_SWITCH */
+#endif /* CONFIG_IFX_ETOP */
+
+	return 0;
+}
+
diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings.h b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings.h
new file mode 100644
index 0000000..3a4b135
--- /dev/null
+++ b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings.h
@@ -0,0 +1,50 @@
+/* Settings for Denali DDR SDRAM controller */
+/* Optimise for Danube Eval Board DDR 167 Mhz - by Ng Aik Ann 29th April */
+#define MC_DC0_VALUE	0x1B1B
+#define MC_DC1_VALUE	0x0
+#define MC_DC2_VALUE	0x0
+#define MC_DC3_VALUE	0x0
+#define MC_DC4_VALUE	0x0
+#define MC_DC5_VALUE	0x200
+#define MC_DC6_VALUE	0x605
+#define MC_DC7_VALUE	0x303
+#define MC_DC8_VALUE	0x102
+#define MC_DC9_VALUE	0x70a
+#define MC_DC10_VALUE	0x203
+#define MC_DC11_VALUE	0xc02
+#define MC_DC12_VALUE	0x1C8
+#define MC_DC13_VALUE	0x1
+#define MC_DC14_VALUE	0x0
+#define MC_DC15_VALUE	0xf3c
+#define MC_DC16_VALUE	0xC800
+#define MC_DC17_VALUE	0xd
+#define MC_DC18_VALUE	0x300
+#define MC_DC19_VALUE	0x200
+#define MC_DC20_VALUE	0xA03
+#define MC_DC21_VALUE	0x1d00
+#define MC_DC22_VALUE	0x1d1d
+#define MC_DC23_VALUE	0x0
+#define MC_DC24_VALUE	0x5e   /* was 0x7f */
+#define MC_DC25_VALUE	0x0
+#define MC_DC26_VALUE	0x0
+#define MC_DC27_VALUE	0x0
+#define MC_DC28_VALUE	0x510
+#define MC_DC29_VALUE	0x2d89
+#define MC_DC30_VALUE	0x8300
+#define MC_DC31_VALUE	0x0
+#define MC_DC32_VALUE	0x0
+#define MC_DC33_VALUE	0x0
+#define MC_DC34_VALUE	0x0
+#define MC_DC35_VALUE	0x0
+#define MC_DC36_VALUE	0x0
+#define MC_DC37_VALUE	0x0
+#define MC_DC38_VALUE	0x0
+#define MC_DC39_VALUE	0x0
+#define MC_DC40_VALUE	0x0
+#define MC_DC41_VALUE	0x0
+#define MC_DC42_VALUE	0x0
+#define MC_DC43_VALUE	0x0
+#define MC_DC44_VALUE	0x0
+#define MC_DC45_VALUE	0x500
+//#define MC_DC45_VALUE	0x400
+#define MC_DC46_VALUE	0x0
diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_PROMOSDDR400.h b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_PROMOSDDR400.h
new file mode 100644
index 0000000..54bb6c9
--- /dev/null
+++ b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_PROMOSDDR400.h
@@ -0,0 +1,50 @@
+/* Settings for Denali DDR SDRAM controller */
+/* Optimise for Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 29th April */
+#define MC_DC0_VALUE	0x1B1B
+#define MC_DC1_VALUE	0x0
+#define MC_DC2_VALUE	0x0
+#define MC_DC3_VALUE	0x0
+#define MC_DC4_VALUE	0x0
+#define MC_DC5_VALUE	0x200
+#define MC_DC6_VALUE	0x605
+#define MC_DC7_VALUE	0x303
+#define MC_DC8_VALUE	0x102
+#define MC_DC9_VALUE	0x70a
+#define MC_DC10_VALUE	0x203
+#define MC_DC11_VALUE	0xa02
+#define MC_DC12_VALUE	0x1C8
+#define MC_DC13_VALUE	0x0
+#define MC_DC14_VALUE	0x0
+#define MC_DC15_VALUE	0xf3c  /* WDQS tuning for clk_wr*/
+#define MC_DC16_VALUE	0xC800
+#define MC_DC17_VALUE	0xd
+#define MC_DC18_VALUE	0x300
+#define MC_DC19_VALUE	0x200
+#define MC_DC20_VALUE	0xA04  /* A04 for reference board, A03 for Eval board */
+#define MC_DC21_VALUE	0x1200
+#define MC_DC22_VALUE	0x1212
+#define MC_DC23_VALUE	0x0
+#define MC_DC24_VALUE	0x62   /* WDQS Tuning for DQS */
+#define MC_DC25_VALUE	0x0
+#define MC_DC26_VALUE	0x0
+#define MC_DC27_VALUE	0x0
+#define MC_DC28_VALUE	0x510
+#define MC_DC29_VALUE	0x4e20
+#define MC_DC30_VALUE	0x8300
+#define MC_DC31_VALUE	0x0
+#define MC_DC32_VALUE	0x0
+#define MC_DC33_VALUE	0x0
+#define MC_DC34_VALUE	0x0
+#define MC_DC35_VALUE	0x0
+#define MC_DC36_VALUE	0x0
+#define MC_DC37_VALUE	0x0
+#define MC_DC38_VALUE	0x0
+#define MC_DC39_VALUE	0x0
+#define MC_DC40_VALUE	0x0
+#define MC_DC41_VALUE	0x0
+#define MC_DC42_VALUE	0x0
+#define MC_DC43_VALUE	0x0
+#define MC_DC44_VALUE	0x0
+#define MC_DC45_VALUE	0x500
+//#define MC_DC45_VALUE	0x400
+#define MC_DC46_VALUE	0x0
diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_Samsung_166.h b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_Samsung_166.h
new file mode 100644
index 0000000..7975c3e
--- /dev/null
+++ b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_Samsung_166.h
@@ -0,0 +1,51 @@
+/* Settings for Denali DDR SDRAM controller */
+/* Optimise for Samsung DDR K4H561638H Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 27th Nov 2006 */
+
+#define MC_DC0_VALUE	0x1B1B
+#define MC_DC1_VALUE	0x0
+#define MC_DC2_VALUE	0x0
+#define MC_DC3_VALUE	0x0
+#define MC_DC4_VALUE	0x0
+#define MC_DC5_VALUE	0x200
+#define MC_DC6_VALUE	0x605
+#define MC_DC7_VALUE	0x303
+#define MC_DC8_VALUE	0x102
+#define MC_DC9_VALUE	0x70a
+#define MC_DC10_VALUE	0x203
+#define MC_DC11_VALUE	0xc02
+#define MC_DC12_VALUE	0x1C8
+#define MC_DC13_VALUE	0x1
+#define MC_DC14_VALUE	0x0
+#define MC_DC15_VALUE	0x120  /* WDQS tuning for clk_wr*/
+#define MC_DC16_VALUE	0xC800
+#define MC_DC17_VALUE	0xd
+#define MC_DC18_VALUE	0x301
+#define MC_DC19_VALUE	0x200
+#define MC_DC20_VALUE	0xA04  /* A04 for reference board, A03 for Eval board */
+#define MC_DC21_VALUE	0x1400
+#define MC_DC22_VALUE	0x1414
+#define MC_DC23_VALUE	0x0
+#define MC_DC24_VALUE	0x4e   /* WDQS Tuning for DQS */
+#define MC_DC25_VALUE	0x0
+#define MC_DC26_VALUE	0x0
+#define MC_DC27_VALUE	0x0
+#define MC_DC28_VALUE	0x510
+#define MC_DC29_VALUE	0x2d93
+#define MC_DC30_VALUE	0x8235
+#define MC_DC31_VALUE	0x0
+#define MC_DC32_VALUE	0x0
+#define MC_DC33_VALUE	0x0
+#define MC_DC34_VALUE	0x0
+#define MC_DC35_VALUE	0x0
+#define MC_DC36_VALUE	0x0
+#define MC_DC37_VALUE	0x0
+#define MC_DC38_VALUE	0x0
+#define MC_DC39_VALUE	0x0
+#define MC_DC40_VALUE	0x0
+#define MC_DC41_VALUE	0x0
+#define MC_DC42_VALUE	0x0
+#define MC_DC43_VALUE	0x0
+#define MC_DC44_VALUE	0x0
+#define MC_DC45_VALUE	0x500
+//#define MC_DC45_VALUE	0x400
+#define MC_DC46_VALUE	0x0
diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_e111.h b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_e111.h
new file mode 100644
index 0000000..b655ca2
--- /dev/null
+++ b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_e111.h
@@ -0,0 +1,50 @@
+/* Settings for Denali DDR SDRAM controller */
+/* Optimise for Danube Eval Board DDR 167 Mhz - by Ng Aik Ann 29th April */
+#define MC_DC0_VALUE	0x1B1B
+#define MC_DC1_VALUE	0x0
+#define MC_DC2_VALUE	0x0
+#define MC_DC3_VALUE	0x0
+#define MC_DC4_VALUE	0x0
+#define MC_DC5_VALUE	0x200
+#define MC_DC6_VALUE	0x605
+#define MC_DC7_VALUE	0x303
+#define MC_DC8_VALUE	0x102
+#define MC_DC9_VALUE	0x70a
+#define MC_DC10_VALUE	0x203
+#define MC_DC11_VALUE	0xc02
+#define MC_DC12_VALUE	0x1C8
+#define MC_DC13_VALUE	0x1
+#define MC_DC14_VALUE	0x0
+#define MC_DC15_VALUE	0xf3c  /* WDQS tuning for clk_wr*/
+#define MC_DC16_VALUE	0xC800
+#define MC_DC17_VALUE	0xd
+#define MC_DC18_VALUE	0x300
+#define MC_DC19_VALUE	0x200
+#define MC_DC20_VALUE	0xA03  /* A04 for reference board, A03 for Eval board */
+#define MC_DC21_VALUE	0x1800
+#define MC_DC22_VALUE	0x1818
+#define MC_DC23_VALUE	0x0
+#define MC_DC24_VALUE	0x5e   /* WDQS Tuning for DQS */
+#define MC_DC25_VALUE	0x0
+#define MC_DC26_VALUE	0x0
+#define MC_DC27_VALUE	0x0
+#define MC_DC28_VALUE	0x510
+#define MC_DC29_VALUE	0x2d89
+#define MC_DC30_VALUE	0x8300
+#define MC_DC31_VALUE	0x0
+#define MC_DC32_VALUE	0x0
+#define MC_DC33_VALUE	0x0
+#define MC_DC34_VALUE	0x0
+#define MC_DC35_VALUE	0x0
+#define MC_DC36_VALUE	0x0
+#define MC_DC37_VALUE	0x0
+#define MC_DC38_VALUE	0x0
+#define MC_DC39_VALUE	0x0
+#define MC_DC40_VALUE	0x0
+#define MC_DC41_VALUE	0x0
+#define MC_DC42_VALUE	0x0
+#define MC_DC43_VALUE	0x0
+#define MC_DC44_VALUE	0x0
+#define MC_DC45_VALUE	0x500
+//#define MC_DC45_VALUE	0x400
+#define MC_DC46_VALUE	0x0
diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_e166.h b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_e166.h
new file mode 100644
index 0000000..b655ca2
--- /dev/null
+++ b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_e166.h
@@ -0,0 +1,50 @@
+/* Settings for Denali DDR SDRAM controller */
+/* Optimise for Danube Eval Board DDR 167 Mhz - by Ng Aik Ann 29th April */
+#define MC_DC0_VALUE	0x1B1B
+#define MC_DC1_VALUE	0x0
+#define MC_DC2_VALUE	0x0
+#define MC_DC3_VALUE	0x0
+#define MC_DC4_VALUE	0x0
+#define MC_DC5_VALUE	0x200
+#define MC_DC6_VALUE	0x605
+#define MC_DC7_VALUE	0x303
+#define MC_DC8_VALUE	0x102
+#define MC_DC9_VALUE	0x70a
+#define MC_DC10_VALUE	0x203
+#define MC_DC11_VALUE	0xc02
+#define MC_DC12_VALUE	0x1C8
+#define MC_DC13_VALUE	0x1
+#define MC_DC14_VALUE	0x0
+#define MC_DC15_VALUE	0xf3c  /* WDQS tuning for clk_wr*/
+#define MC_DC16_VALUE	0xC800
+#define MC_DC17_VALUE	0xd
+#define MC_DC18_VALUE	0x300
+#define MC_DC19_VALUE	0x200
+#define MC_DC20_VALUE	0xA03  /* A04 for reference board, A03 for Eval board */
+#define MC_DC21_VALUE	0x1800
+#define MC_DC22_VALUE	0x1818
+#define MC_DC23_VALUE	0x0
+#define MC_DC24_VALUE	0x5e   /* WDQS Tuning for DQS */
+#define MC_DC25_VALUE	0x0
+#define MC_DC26_VALUE	0x0
+#define MC_DC27_VALUE	0x0
+#define MC_DC28_VALUE	0x510
+#define MC_DC29_VALUE	0x2d89
+#define MC_DC30_VALUE	0x8300
+#define MC_DC31_VALUE	0x0
+#define MC_DC32_VALUE	0x0
+#define MC_DC33_VALUE	0x0
+#define MC_DC34_VALUE	0x0
+#define MC_DC35_VALUE	0x0
+#define MC_DC36_VALUE	0x0
+#define MC_DC37_VALUE	0x0
+#define MC_DC38_VALUE	0x0
+#define MC_DC39_VALUE	0x0
+#define MC_DC40_VALUE	0x0
+#define MC_DC41_VALUE	0x0
+#define MC_DC42_VALUE	0x0
+#define MC_DC43_VALUE	0x0
+#define MC_DC44_VALUE	0x0
+#define MC_DC45_VALUE	0x500
+//#define MC_DC45_VALUE	0x400
+#define MC_DC46_VALUE	0x0
diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_psc_166.h b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_psc_166.h
new file mode 100644
index 0000000..445b7da
--- /dev/null
+++ b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_psc_166.h
@@ -0,0 +1,51 @@
+/* Settings for Denali DDR SDRAM controller */
+/* Optimise for PSC DDR A2S56D40CTP for Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 27th Nov 2006 */
+
+#define MC_DC0_VALUE	0x1B1B
+#define MC_DC1_VALUE	0x0
+#define MC_DC2_VALUE	0x0
+#define MC_DC3_VALUE	0x0
+#define MC_DC4_VALUE	0x0
+#define MC_DC5_VALUE	0x200
+#define MC_DC6_VALUE	0x605
+#define MC_DC7_VALUE	0x303
+#define MC_DC8_VALUE	0x102
+#define MC_DC9_VALUE	0x70a
+#define MC_DC10_VALUE	0x203
+#define MC_DC11_VALUE	0xc02
+#define MC_DC12_VALUE	0x1C8
+#define MC_DC13_VALUE	0x1
+#define MC_DC14_VALUE	0x0
+#define MC_DC15_VALUE	0x120  /* WDQS tuning for clk_wr*/
+#define MC_DC16_VALUE	0xC800
+#define MC_DC17_VALUE	0xd
+#define MC_DC18_VALUE	0x301
+#define MC_DC19_VALUE	0x200
+#define MC_DC20_VALUE	0xA04  /* A04 for reference board, A03 for Eval board */
+#define MC_DC21_VALUE	0x1700
+#define MC_DC22_VALUE	0x1717
+#define MC_DC23_VALUE	0x0
+#define MC_DC24_VALUE	0x52   /* WDQS Tuning for DQS */
+#define MC_DC25_VALUE	0x0
+#define MC_DC26_VALUE	0x0
+#define MC_DC27_VALUE	0x0
+#define MC_DC28_VALUE	0x510
+#define MC_DC29_VALUE	0x4e20
+#define MC_DC30_VALUE	0x8235
+#define MC_DC31_VALUE	0x0
+#define MC_DC32_VALUE	0x0
+#define MC_DC33_VALUE	0x0
+#define MC_DC34_VALUE	0x0
+#define MC_DC35_VALUE	0x0
+#define MC_DC36_VALUE	0x0
+#define MC_DC37_VALUE	0x0
+#define MC_DC38_VALUE	0x0
+#define MC_DC39_VALUE	0x0
+#define MC_DC40_VALUE	0x0
+#define MC_DC41_VALUE	0x0
+#define MC_DC42_VALUE	0x0
+#define MC_DC43_VALUE	0x0
+#define MC_DC44_VALUE	0x0
+#define MC_DC45_VALUE	0x500
+//#define MC_DC45_VALUE	0x400
+#define MC_DC46_VALUE	0x0
diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_r111.h b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_r111.h
new file mode 100644
index 0000000..fd15597
--- /dev/null
+++ b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_r111.h
@@ -0,0 +1,50 @@
+/* Settings for Denali DDR SDRAM controller */
+/* Optimise for Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 29th April */
+#define MC_DC0_VALUE	0x1B1B
+#define MC_DC1_VALUE	0x0
+#define MC_DC2_VALUE	0x0
+#define MC_DC3_VALUE	0x0
+#define MC_DC4_VALUE	0x0
+#define MC_DC5_VALUE	0x200
+#define MC_DC6_VALUE	0x605
+#define MC_DC7_VALUE	0x303
+#define MC_DC8_VALUE	0x102
+#define MC_DC9_VALUE	0x70a
+#define MC_DC10_VALUE	0x203
+#define MC_DC11_VALUE	0xc02
+#define MC_DC12_VALUE	0x1C8
+#define MC_DC13_VALUE	0x1
+#define MC_DC14_VALUE	0x0
+#define MC_DC15_VALUE	0xf3c  /* WDQS tuning for clk_wr*/
+#define MC_DC16_VALUE	0xC800
+#define MC_DC17_VALUE	0xd
+#define MC_DC18_VALUE	0x300
+#define MC_DC19_VALUE	0x200
+#define MC_DC20_VALUE	0xA04  /* A04 for reference board, A03 for Eval board */
+#define MC_DC21_VALUE	0x1200
+#define MC_DC22_VALUE	0x1212
+#define MC_DC23_VALUE	0x0
+#define MC_DC24_VALUE	0x5e   /* WDQS Tuning for DQS */
+#define MC_DC25_VALUE	0x0
+#define MC_DC26_VALUE	0x0
+#define MC_DC27_VALUE	0x0
+#define MC_DC28_VALUE	0x510
+#define MC_DC29_VALUE	0x2d89
+#define MC_DC30_VALUE	0x8300
+#define MC_DC31_VALUE	0x0
+#define MC_DC32_VALUE	0x0
+#define MC_DC33_VALUE	0x0
+#define MC_DC34_VALUE	0x0
+#define MC_DC35_VALUE	0x0
+#define MC_DC36_VALUE	0x0
+#define MC_DC37_VALUE	0x0
+#define MC_DC38_VALUE	0x0
+#define MC_DC39_VALUE	0x0
+#define MC_DC40_VALUE	0x0
+#define MC_DC41_VALUE	0x0
+#define MC_DC42_VALUE	0x0
+#define MC_DC43_VALUE	0x0
+#define MC_DC44_VALUE	0x0
+#define MC_DC45_VALUE	0x500
+//#define MC_DC45_VALUE	0x400
+#define MC_DC46_VALUE	0x0
diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_r166.h b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_r166.h
new file mode 100644
index 0000000..742d34f
--- /dev/null
+++ b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_r166.h
@@ -0,0 +1,50 @@
+/* Settings for Denali DDR SDRAM controller */
+/* Optimise for Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 29th April */
+#define MC_DC0_VALUE	0x1B1B
+#define MC_DC1_VALUE	0x0
+#define MC_DC2_VALUE	0x0
+#define MC_DC3_VALUE	0x0
+#define MC_DC4_VALUE	0x0
+#define MC_DC5_VALUE	0x200
+#define MC_DC6_VALUE	0x605
+#define MC_DC7_VALUE	0x303
+#define MC_DC8_VALUE	0x102
+#define MC_DC9_VALUE	0x70a
+#define MC_DC10_VALUE	0x203
+#define MC_DC11_VALUE	0xc02
+#define MC_DC12_VALUE	0x1C8
+#define MC_DC13_VALUE	0x1
+#define MC_DC14_VALUE	0x0
+#define MC_DC15_VALUE	0xf3c  /* WDQS tuning for clk_wr*/
+#define MC_DC16_VALUE	0xC800
+#define MC_DC17_VALUE	0xd
+#define MC_DC18_VALUE	0x300
+#define MC_DC19_VALUE	0x200
+#define MC_DC20_VALUE	0xA04  /* A04 for reference board, A03 for Eval board */
+#define MC_DC21_VALUE	0xd00
+#define MC_DC22_VALUE	0xd0d
+#define MC_DC23_VALUE	0x0
+#define MC_DC24_VALUE	0x62   /* WDQS Tuning for DQS */
+#define MC_DC25_VALUE	0x0
+#define MC_DC26_VALUE	0x0
+#define MC_DC27_VALUE	0x0
+#define MC_DC28_VALUE	0x510
+#define MC_DC29_VALUE	0x2d89
+#define MC_DC30_VALUE	0x8300
+#define MC_DC31_VALUE	0x0
+#define MC_DC32_VALUE	0x0
+#define MC_DC33_VALUE	0x0
+#define MC_DC34_VALUE	0x0
+#define MC_DC35_VALUE	0x0
+#define MC_DC36_VALUE	0x0
+#define MC_DC37_VALUE	0x0
+#define MC_DC38_VALUE	0x0
+#define MC_DC39_VALUE	0x0
+#define MC_DC40_VALUE	0x0
+#define MC_DC41_VALUE	0x0
+#define MC_DC42_VALUE	0x0
+#define MC_DC43_VALUE	0x0
+#define MC_DC44_VALUE	0x0
+#define MC_DC45_VALUE	0x500
+//#define MC_DC45_VALUE	0x400
+#define MC_DC46_VALUE	0x0
diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/lowlevel_init.S b/package/uboot-lantiq/files/board/infineon/easy50712/lowlevel_init.S
new file mode 100644
index 0000000..4dc179f
--- /dev/null
+++ b/package/uboot-lantiq/files/board/infineon/easy50712/lowlevel_init.S
@@ -0,0 +1,613 @@
+/*
+ *  Memory sub-system initialization code for Danube board.
+ *  Andre Messerschmidt
+ *  Copyright (c) 2005	Infineon Technologies AG
+ *
+ *  Based on Inca-IP code
+ *  Copyright (c) 2003	Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/* History:
+      peng liu May 25, 2006, for PLL setting after reset, 05252006
+ */
+#include <config.h>
+#include <version.h>
+#include <asm/regdef.h>
+
+#if defined(CONFIG_USE_DDR_RAM)
+
+#if defined(CONFIG_USE_DDR_RAM_CFG_111M)
+#include "ddr_settings_r111.h"
+#define DDR111
+#elif defined(CONFIG_USE_DDR_RAM_CFG_166M)
+#include "ddr_settings_r166.h"
+#define DDR166
+#elif defined(CONFIG_USE_DDR_RAM_CFG_e111M)
+#include "ddr_settings_e111.h"
+#define DDR111
+#elif defined(CONFIG_USE_DDR_RAM_CFG_e166M)
+#include "ddr_settings_e166.h"
+#define DDR166
+#elif defined(CONFIG_USE_DDR_RAM_CFG_promos400)
+#include "ddr_settings_PROMOSDDR400.h"
+#define DDR166
+#elif defined(CONFIG_USE_DDR_RAM_CFG_samsung166)
+#include "ddr_settings_Samsung_166.h"
+#define DDR166
+#elif defined(CONFIG_USE_DDR_RAM_CFG_psc166)
+#include "ddr_settings_psc_166.h"
+#define DDR166
+#else
+#warning "missing definition for ddr_settings.h, use default!"
+#include "ddr_settings.h"
+#endif
+#endif /* CONFIG_USE_DDR_RAM */
+
+#if defined(CONFIG_USE_DDR_RAM) &&  !defined(MC_DC0_VALUE)
+#error "missing include of ddr_settings.h"
+#endif
+
+#define EBU_MODUL_BASE		0xBE105300
+#define EBU_CLC(value)		0x0000(value)
+#define EBU_CON(value)		0x0010(value)
+#define EBU_ADDSEL0(value)	0x0020(value)
+#define EBU_ADDSEL1(value)	0x0024(value)
+#define EBU_ADDSEL2(value)	0x0028(value)
+#define EBU_ADDSEL3(value)	0x002C(value)
+#define EBU_BUSCON0(value)	0x0060(value)
+#define EBU_BUSCON1(value)	0x0064(value)
+#define EBU_BUSCON2(value)	0x0068(value)
+#define EBU_BUSCON3(value)	0x006C(value)
+
+#define MC_MODUL_BASE		0xBF800000
+#define MC_ERRCAUSE(value)	0x0010(value)
+#define MC_ERRADDR(value)	0x0020(value)
+#define MC_CON(value)		0x0060(value)
+
+#define MC_SRAM_ENABLE		0x00000004
+#define MC_SDRAM_ENABLE		0x00000002
+#define MC_DDRRAM_ENABLE	0x00000001
+
+#define MC_SDR_MODUL_BASE	0xBF800200
+#define MC_IOGP(value)		0x0000(value)
+#define MC_CTRLENA(value)	0x0010(value)
+#define MC_MRSCODE(value)	0x0020(value)
+#define MC_CFGDW(value)		0x0030(value)
+#define MC_CFGPB0(value)	0x0040(value)
+#define MC_LATENCY(value)	0x0080(value)
+#define MC_TREFRESH(value)	0x0090(value)
+#define MC_SELFRFSH(value)	0x00A0(value)
+
+#define MC_DDR_MODUL_BASE	0xBF801000
+#define MC_DC00(value)		0x0000(value)
+#define MC_DC01(value)		0x0010(value)
+#define MC_DC02(value)		0x0020(value)
+#define MC_DC03(value)		0x0030(value)
+#define MC_DC04(value)		0x0040(value)
+#define MC_DC05(value)		0x0050(value)
+#define MC_DC06(value)		0x0060(value)
+#define MC_DC07(value)		0x0070(value)
+#define MC_DC08(value)		0x0080(value)
+#define MC_DC09(value)		0x0090(value)
+#define MC_DC10(value)		0x00A0(value)
+#define MC_DC11(value)		0x00B0(value)
+#define MC_DC12(value)		0x00C0(value)
+#define MC_DC13(value)		0x00D0(value)
+#define MC_DC14(value)		0x00E0(value)
+#define MC_DC15(value)		0x00F0(value)
+#define MC_DC16(value)		0x0100(value)
+#define MC_DC17(value)		0x0110(value)
+#define MC_DC18(value)		0x0120(value)
+#define MC_DC19(value)		0x0130(value)
+#define MC_DC20(value)		0x0140(value)
+#define MC_DC21(value)		0x0150(value)
+#define MC_DC22(value)		0x0160(value)
+#define MC_DC23(value)		0x0170(value)
+#define MC_DC24(value)		0x0180(value)
+#define MC_DC25(value)		0x0190(value)
+#define MC_DC26(value)		0x01A0(value)
+#define MC_DC27(value)		0x01B0(value)
+#define MC_DC28(value)		0x01C0(value)
+#define MC_DC29(value)		0x01D0(value)
+#define MC_DC30(value)		0x01E0(value)
+#define MC_DC31(value)		0x01F0(value)
+#define MC_DC32(value)		0x0200(value)
+#define MC_DC33(value)		0x0210(value)
+#define MC_DC34(value)		0x0220(value)
+#define MC_DC35(value)		0x0230(value)
+#define MC_DC36(value)		0x0240(value)
+#define MC_DC37(value)		0x0250(value)
+#define MC_DC38(value)		0x0260(value)
+#define MC_DC39(value)		0x0270(value)
+#define MC_DC40(value)		0x0280(value)
+#define MC_DC41(value)		0x0290(value)
+#define MC_DC42(value)		0x02A0(value)
+#define MC_DC43(value)		0x02B0(value)
+#define MC_DC44(value)		0x02C0(value)
+#define MC_DC45(value)		0x02D0(value)
+#define MC_DC46(value)		0x02E0(value)
+
+#define RCU_OFFSET  0xBF203000
+#define RCU_RST_REQ      (RCU_OFFSET + 0x0010)
+#define RCU_STS          (RCU_OFFSET + 0x0014)
+
+#define CGU_OFFSET  0xBF103000
+#define  PLL0_CFG     (CGU_OFFSET + 0x0004)
+#define  PLL1_CFG     (CGU_OFFSET + 0x0008)
+#define  PLL2_CFG     (CGU_OFFSET + 0x000C)
+#define  CGU_SYS      (CGU_OFFSET + 0x0010)
+#define  CGU_UPDATE   (CGU_OFFSET + 0x0014)
+#define  IF_CLK       (CGU_OFFSET + 0x0018)
+#define  CGU_SMD      (CGU_OFFSET + 0x0020)
+#define  CGU_CT1SR    (CGU_OFFSET + 0x0028)
+#define  CGU_CT2SR    (CGU_OFFSET + 0x002C)
+#define  CGU_PCMCR    (CGU_OFFSET + 0x0030)
+#define  PCI_CR_PCI   (CGU_OFFSET + 0x0034)
+#define  CGU_OSC_CTRL (CGU_OFFSET + 0x001C)
+#define  CGU_MIPS_PWR_DWN (CGU_OFFSET + 0x0038)
+#define  CLK_MEASURE  (CGU_OFFSET + 0x003C)
+
+//05252006
+#define  pll0_35MHz_CONFIG 0x9D861059
+#define  pll1_35MHz_CONFIG 0x1A260CD9
+#define  pll2_35MHz_CONFIG 0x8000f1e5
+#define  pll0_36MHz_CONFIG 0x1000125D
+#define  pll1_36MHz_CONFIG 0x1B1E0C99
+#define  pll2_36MHz_CONFIG 0x8002f2a1
+//05252006
+
+//06063001-joelin disable the PCI CFRAME mask -start
+/*CFRAME is an I/O signal, in the chip, the output CFRAME is selected via GPIO altsel pins, so if you select MII1 RXD1, the CFRAME will not come out.
+But the CFRAME input still take the signal from the pad and not disabled when altsel choose other function. So when MII1_RXD1 is low from other device, the EBU interface will be disabled.
+
+The chip function in such a way that disable the CFRAME mask mean EBU not longer check CFRAME to be the device using the bus.
+The side effect is the entire PCI block will see CFRAME low all the time meaning PCI cannot use the bus at all so no more PCI function.
+*/
+#define PCI_CR_PR_OFFSET  0xBE105400
+#define PCI_CR_PCI_MOD_REG          (PCI_CR_PR_OFFSET + 0x0030)
+#define PCI_CONFIG_SPACE  0xB7000000
+#define CS_CFM		(PCI_CONFIG_SPACE + 0x6C)
+//06063001-joelin disable the PCI CFRAME mask -end
+	.set	noreorder
+
+
+/*
+ * void ebu_init(void)
+ */
+	.globl	ebu_init
+	.ent	ebu_init
+ebu_init:
+
+#if defined(CONFIG_EBU_ADDSEL0) || defined(CONFIG_EBU_ADDSEL1) || \
+	defined(CONFIG_EBU_ADDSEL2) || defined(CONFIG_EBU_ADDSEL3) || \
+	defined(CONFIG_EBU_BUSCON0) || defined(CONFIG_EBU_BUSCON1) || \
+	defined(CONFIG_EBU_BUSCON2) || defined(CONFIG_EBU_BUSCON3)
+
+	li	t1, EBU_MODUL_BASE
+#if defined(CONFIG_EBU_ADDSEL0)
+	li	t2, CONFIG_EBU_ADDSEL0
+	sw	t2, EBU_ADDSEL0(t1)
+#endif
+#if defined(CONFIG_EBU_ADDSEL1)
+	li	t2, CONFIG_EBU_ADDSEL1
+	sw	t2, EBU_ADDSEL1(t1)
+#endif
+#if defined(CONFIG_EBU_ADDSEL2)
+	li	t2, CONFIG_EBU_ADDSEL2
+	sw	t2, EBU_ADDSEL2(t1)
+#endif
+#if defined(CONFIG_EBU_ADDSEL3)
+	li	t2, CONFIG_EBU_ADDSEL3
+	sw	t2, EBU_ADDSEL3(t1)
+#endif
+
+#if defined(CONFIG_EBU_BUSCON0)
+	li	t2, CONFIG_EBU_BUSCON0
+	sw	t2, EBU_BUSCON0(t1)
+#endif
+#if defined(CONFIG_EBU_BUSCON1)
+	li	t2, CONFIG_EBU_BUSCON1
+	sw	t2, EBU_BUSCON1(t1)
+#endif
+#if defined(CONFIG_EBU_BUSCON2)
+	li	t2, CONFIG_EBU_BUSCON2
+	sw	t2, EBU_BUSCON2(t1)
+#endif
+#if defined(CONFIG_EBU_BUSCON3)
+	li	t2, CONFIG_EBU_BUSCON3
+	sw	t2, EBU_BUSCON3(t1)
+#endif
+
+#endif
+
+	j	ra
+	nop
+
+	.end	ebu_init
+
+
+/*
+ * void cgu_init(long)
+ *
+ * a0 has the clock value
+ */
+	.globl	cgu_init
+	.ent	cgu_init
+cgu_init:
+	li  t2, CGU_SYS
+	lw  t2,0(t2)
+	beq t2,a0,freq_up2date
+	nop
+
+	li  t2, RCU_STS
+	lw  t2, 0(t2)
+	and t2,0x00020000
+	beq t2,0x00020000,boot_36MHZ
+	nop
+//05252006
+	li  t1, PLL0_CFG
+	li  t2, pll0_35MHz_CONFIG
+	sw	t2,0(t1)
+	li  t1, PLL1_CFG
+	li  t2, pll1_35MHz_CONFIG
+	sw	t2,0(t1)
+	li  t1, PLL2_CFG
+	li  t2, pll2_35MHz_CONFIG
+	sw	t2,0(t1)
+	li  t1, CGU_SYS
+	sw	a0,0(t1)
+	li  t1, RCU_RST_REQ
+	li  t2, 0x40000008
+	sw	t2,0(t1)
+	b   wait_reset
+	nop
+boot_36MHZ:
+	li  t1, PLL0_CFG
+	li  t2, pll0_36MHz_CONFIG
+	sw	t2,0(t1)
+	li  t1, PLL1_CFG
+	li  t2, pll1_36MHz_CONFIG
+	sw	t2,0(t1)
+	li  t1, PLL2_CFG
+	li  t2, pll2_36MHz_CONFIG
+	sw	t2,0(t1)
+	li  t1, CGU_SYS
+	sw	a0,0(t1)
+	li  t1, RCU_RST_REQ
+	li  t2, 0x40000008
+	sw	t2,0(t1)
+//05252006
+
+wait_reset:
+	b   wait_reset
+	nop
+freq_up2date:
+	j ra
+	nop
+
+	.end	cgu_init
+
+#ifndef CONFIG_USE_DDR_RAM
+/*
+ * void sdram_init(long)
+ *
+ * a0 has the clock value
+ */
+	.globl	sdram_init
+	.ent	sdram_init
+sdram_init:
+
+	/* SDRAM Initialization
+	 */
+	li	t1, MC_MODUL_BASE
+
+	/* Clear Error log registers */
+	sw	zero, MC_ERRCAUSE(t1)
+	sw	zero, MC_ERRADDR(t1)
+
+	/* Enable SDRAM module in memory controller */
+	li	t3, MC_SDRAM_ENABLE
+	lw	t2, MC_CON(t1)
+	or	t3, t2, t3
+	sw	t3, MC_CON(t1)
+
+	li	t1, MC_SDR_MODUL_BASE
+
+	/* disable the controller */
+	li	t2, 0
+	sw	t2, MC_CTRLENA(t1)
+
+	li	t2, 0x822
+	sw	t2, MC_IOGP(t1)
+
+	li	t2, 0x2
+	sw	t2, MC_CFGDW(t1)
+
+	/* Set CAS Latency */
+	li	t2, 0x00000020
+	sw	t2, MC_MRSCODE(t1)
+
+	/* Set CS0 to SDRAM parameters */
+	li	t2, 0x000014d8
+	sw	t2, MC_CFGPB0(t1)
+
+	/* Set SDRAM latency parameters */
+	li  	t2, 0x00036325;   /* BC PC100 */
+	sw	t2, MC_LATENCY(t1)
+
+	/* Set SDRAM refresh rate */
+	li	t2, 0x00000C30
+	sw	t2, MC_TREFRESH(t1)
+
+	/* Clear Power-down registers */
+	sw	zero, MC_SELFRFSH(t1)
+
+	/* Finally enable the controller */
+	li	t2, 1
+	sw	t2, MC_CTRLENA(t1)
+
+	j	ra
+	nop
+
+	.end	sdram_init
+
+#endif /* !CONFIG_USE_DDR_RAM */
+
+#ifdef CONFIG_USE_DDR_RAM
+/*
+ * void ddrram_init(long)
+ *
+ * a0 has the clock value
+ */
+	.globl	ddrram_init
+	.ent	ddrram_init
+ddrram_init:
+
+	/* DDR-DRAM Initialization
+	 */
+	li	t1, MC_MODUL_BASE
+
+	/* Clear Error log registers */
+	sw	zero, MC_ERRCAUSE(t1)
+	sw	zero, MC_ERRADDR(t1)
+
+	/* Enable DDR module in memory controller */
+	li	t3, MC_DDRRAM_ENABLE
+	lw	t2, MC_CON(t1)
+	or	t3, t2, t3
+	sw	t3, MC_CON(t1)
+
+	li	t1, MC_DDR_MODUL_BASE
+
+	/* Write configuration to DDR controller registers */
+	li	t2, MC_DC0_VALUE
+	sw	t2, MC_DC00(t1)
+
+	li	t2, MC_DC1_VALUE
+	sw	t2, MC_DC01(t1)
+
+	li	t2, MC_DC2_VALUE
+	sw	t2, MC_DC02(t1)
+
+	li	t2, MC_DC3_VALUE
+	sw	t2, MC_DC03(t1)
+
+	li	t2, MC_DC4_VALUE
+	sw	t2, MC_DC04(t1)
+
+	li	t2, MC_DC5_VALUE
+	sw	t2, MC_DC05(t1)
+
+	li	t2, MC_DC6_VALUE
+	sw	t2, MC_DC06(t1)
+
+	li	t2, MC_DC7_VALUE
+	sw	t2, MC_DC07(t1)
+
+	li	t2, MC_DC8_VALUE
+	sw	t2, MC_DC08(t1)
+
+	li	t2, MC_DC9_VALUE
+	sw	t2, MC_DC09(t1)
+
+	li	t2, MC_DC10_VALUE
+	sw	t2, MC_DC10(t1)
+
+	li	t2, MC_DC11_VALUE
+	sw	t2, MC_DC11(t1)
+
+	li	t2, MC_DC12_VALUE
+	sw	t2, MC_DC12(t1)
+
+	li	t2, MC_DC13_VALUE
+	sw	t2, MC_DC13(t1)
+
+	li	t2, MC_DC14_VALUE
+	sw	t2, MC_DC14(t1)
+
+	li	t2, MC_DC15_VALUE
+	sw	t2, MC_DC15(t1)
+
+	li	t2, MC_DC16_VALUE
+	sw	t2, MC_DC16(t1)
+
+	li	t2, MC_DC17_VALUE
+	sw	t2, MC_DC17(t1)
+
+	li	t2, MC_DC18_VALUE
+	sw	t2, MC_DC18(t1)
+
+	li	t2, MC_DC19_VALUE
+	sw	t2, MC_DC19(t1)
+
+	li	t2, MC_DC20_VALUE
+	sw	t2, MC_DC20(t1)
+
+	li	t2, MC_DC21_VALUE
+	sw	t2, MC_DC21(t1)
+
+	li	t2, MC_DC22_VALUE
+	sw	t2, MC_DC22(t1)
+
+	li	t2, MC_DC23_VALUE
+	sw	t2, MC_DC23(t1)
+
+	li	t2, MC_DC24_VALUE
+	sw	t2, MC_DC24(t1)
+
+	li	t2, MC_DC25_VALUE
+	sw	t2, MC_DC25(t1)
+
+	li	t2, MC_DC26_VALUE
+	sw	t2, MC_DC26(t1)
+
+	li	t2, MC_DC27_VALUE
+	sw	t2, MC_DC27(t1)
+
+	li	t2, MC_DC28_VALUE
+	sw	t2, MC_DC28(t1)
+
+	li	t2, MC_DC29_VALUE
+	sw	t2, MC_DC29(t1)
+
+	li	t2, MC_DC30_VALUE
+	sw	t2, MC_DC30(t1)
+
+	li	t2, MC_DC31_VALUE
+	sw	t2, MC_DC31(t1)
+
+	li	t2, MC_DC32_VALUE
+	sw	t2, MC_DC32(t1)
+
+	li	t2, MC_DC33_VALUE
+	sw	t2, MC_DC33(t1)
+
+	li	t2, MC_DC34_VALUE
+	sw	t2, MC_DC34(t1)
+
+	li	t2, MC_DC35_VALUE
+	sw	t2, MC_DC35(t1)
+
+	li	t2, MC_DC36_VALUE
+	sw	t2, MC_DC36(t1)
+
+	li	t2, MC_DC37_VALUE
+	sw	t2, MC_DC37(t1)
+
+	li	t2, MC_DC38_VALUE
+	sw	t2, MC_DC38(t1)
+
+	li	t2, MC_DC39_VALUE
+	sw	t2, MC_DC39(t1)
+
+	li	t2, MC_DC40_VALUE
+	sw	t2, MC_DC40(t1)
+
+	li	t2, MC_DC41_VALUE
+	sw	t2, MC_DC41(t1)
+
+	li	t2, MC_DC42_VALUE
+	sw	t2, MC_DC42(t1)
+
+	li	t2, MC_DC43_VALUE
+	sw	t2, MC_DC43(t1)
+
+	li	t2, MC_DC44_VALUE
+	sw	t2, MC_DC44(t1)
+
+	li	t2, MC_DC45_VALUE
+	sw	t2, MC_DC45(t1)
+
+	li	t2, MC_DC46_VALUE
+	sw	t2, MC_DC46(t1)
+
+	li	t2, 0x00000100
+	sw	t2, MC_DC03(t1)
+
+	j	ra
+	nop
+
+	.end	ddrram_init
+#endif /* CONFIG_USE_DDR_RAM */
+
+	.globl	lowlevel_init
+	.ent	lowlevel_init
+lowlevel_init:
+	/* EBU, CGU and SDRAM/DDR-RAM Initialization.
+	 */
+	move	t0, ra
+	/* We rely on the fact that non of the following ..._init() functions
+	 * modify t0
+	 */
+#if defined(CONFIG_SYS_EBU_BOOT)
+#if defined(DDR166)
+	/* 0xe8 means CPU0/CPU1 333M, DDR 167M, FPI 83M, PPE 240M */
+	li  a0,0xe8
+#elif defined(DDR133)
+	/* 0xe9 means CPU0/CPU1 333M, DDR 133M, FPI 83M, PPE 240M */
+	li  a0,0xe9
+#else /* defined(DDR111) */
+	/* 0xea means CPU0/CPU1 333M, DDR 111M, FPI 83M, PPE 240M */
+	li  a0,0xea
+#endif
+	bal	cgu_init
+	nop
+#endif /* CONFIG_SYS_EBU_BOOT */
+
+	bal	ebu_init
+	nop
+
+//06063001-joelin disable the PCI CFRAME mask-start
+#ifdef DISABLE_CFRAME
+	li  t1, PCI_CR_PCI	//mw bf103034 80000000
+	li  t2, 0x80000000
+	sw	t2,0(t1)
+
+	li  t1, PCI_CR_PCI_MOD_REG	//mw be105430 103
+	li  t2, 0x103
+	sw  t2,0(t1)
+
+	li  t1, CS_CFM			//mw b700006c 0
+	li  t2, 0x00
+	sw  t2, 0(t1)
+
+	li  t1, PCI_CR_PCI_MOD_REG	//mw be105430 103
+	li  t2, 0x1000103
+	sw  t2, 0(t1)
+#endif
+//06063001-joelin disable the PCI CFRAME mask-end
+
+#ifdef CONFIG_SYS_EBU_BOOT
+#ifndef CONFIG_SYS_RAMBOOT
+#ifdef CONFIG_USE_DDR_RAM
+	bal	ddrram_init
+	nop
+#else
+	bal	sdram_init
+	nop
+#endif
+#endif /* CONFIG_SYS_RAMBOOT */
+#endif /* CONFIG_SYS_EBU_BOOT */
+
+	move	ra, t0
+	j	ra
+	nop
+
+	.end	lowlevel_init
diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/pmuenable.S b/package/uboot-lantiq/files/board/infineon/easy50712/pmuenable.S
new file mode 100644
index 0000000..e0d7971
--- /dev/null
+++ b/package/uboot-lantiq/files/board/infineon/easy50712/pmuenable.S
@@ -0,0 +1,48 @@
+/*
+ *  Power Management unit initialization code for AMAZON development board.
+ *
+ *  Copyright (c) 2003	Ou Ke, Infineon.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/regdef.h>
+
+#define PMU_PWDCR 		0xBF10201C
+#define PMU_SR			0xBF102020
+
+	.globl	pmuenable
+
+pmuenable:
+	li      t0, PMU_PWDCR
+	li      t1, 0x2		/* enable everything */
+	sw      t1, 0(t0)
+#if 0
+1:
+	li	t0, PMU_SR
+	lw      t2, 0(t0)
+	bne     t1, t2, 1b
+	nop
+#endif
+	j	ra
+	nop
+
+
diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/u-boot.lds b/package/uboot-lantiq/files/board/infineon/easy50712/u-boot.lds
new file mode 100644
index 0000000..9a6cd1b
--- /dev/null
+++ b/package/uboot-lantiq/files/board/infineon/easy50712/u-boot.lds
@@ -0,0 +1,70 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk Engineering, <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
+*/
+OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradbigmips")
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text       :
+	{
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata  : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+	. = ALIGN(4);
+	.data  : { *(.data) }
+
+	. = .;
+	_gp = ALIGN(16) + 0x7ff0;
+
+	.got : {
+	  __got_start = .;
+	  *(.got)
+	  __got_end = .;
+	}
+
+	.sdata  : { *(.sdata) }
+
+	.u_boot_cmd : {
+	  __u_boot_cmd_start = .;
+	  *(.u_boot_cmd)
+	  __u_boot_cmd_end = .;
+	}
+
+	uboot_end_data = .;
+	num_got_entries = (__got_end - __got_start) >> 2;
+
+	. = ALIGN(4);
+	.sbss (NOLOAD)  : { *(.sbss) }
+	.bss (NOLOAD)  : { *(.bss) . = ALIGN(4); }
+	uboot_end = .;
+}
diff --git a/package/uboot-lantiq/files/cpu/mips/danube/Makefile b/package/uboot-lantiq/files/cpu/mips/danube/Makefile
new file mode 100644
index 0000000..c48d02e
--- /dev/null
+++ b/package/uboot-lantiq/files/cpu/mips/danube/Makefile
@@ -0,0 +1,46 @@
+#########################################################################
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(SOC).a
+
+COBJS	= clock.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+all:	$(obj).depend $(LIB)
+
+$(LIB):	$(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/package/uboot-lantiq/files/cpu/mips/danube/clock.c b/package/uboot-lantiq/files/cpu/mips/danube/clock.c
new file mode 100644
index 0000000..4219f8f
--- /dev/null
+++ b/package/uboot-lantiq/files/cpu/mips/danube/clock.c
@@ -0,0 +1,65 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/danube.h>
+
+ulong ifx_get_ddr_hz(void)
+{
+	static const ulong ddr_freq[] = {166666667,133333333,111111111,83333333};
+	return ddr_freq[((*DANUBE_CGU_SYS) & 0x3)];
+}
+
+ulong ifx_get_cpuclk(void)
+{
+#ifdef CONFIG_USE_EMULATOR
+	return EMULATOR_CPU_SPEED;
+#else //NOT CONFIG_USE_EMULATOR
+	unsigned int ddr_clock=ifx_get_ddr_hz();
+	switch((*DANUBE_CGU_SYS) & 0xc){
+		case 0:
+		default:
+			return 323333333;
+		case 4:
+			return ddr_clock;
+		case 8:
+			return ddr_clock << 1;
+	}
+#endif
+}
+
+ulong get_bus_freq(ulong dummy)
+{
+#ifdef CONFIG_USE_EMULATOR
+	unsigned int  clkCPU;
+	clkCPU = ifx_get_cpuclk();
+	return clkCPU >> 2;
+#else //NOT CONFIG_USE_EMULATOR
+	unsigned int ddr_clock=ifx_get_ddr_hz();
+	if ((*DANUBE_CGU_SYS) & 0x40){
+		return ddr_clock >> 1;
+	}
+	return ddr_clock;
+#endif
+}
+
diff --git a/package/uboot-lantiq/files/cpu/mips/danube/ifx_cache.S b/package/uboot-lantiq/files/cpu/mips/danube/ifx_cache.S
new file mode 100644
index 0000000..fc482dc
--- /dev/null
+++ b/package/uboot-lantiq/files/cpu/mips/danube/ifx_cache.S
@@ -0,0 +1,60 @@
+
+#define IFX_CACHE_EXTRA_INVALID_TAG						\
+	mtc0	zero, CP0_TAGLO, 1;						\
+	mtc0	zero, CP0_TAGLO, 2;						\
+	mtc0	zero, CP0_TAGLO, 3;						\
+	mtc0	zero, CP0_TAGLO, 4;
+
+#define IFX_CACHE_EXTRA_OPERATION						\
+	/* set WST bit */							\
+	mfc0	a0, CP0_ECC;							\
+	li	a1, ECCF_WST;							\
+	or	a0, a1;								\
+	mtc0	a0, CP0_ECC;							\
+										\
+	li	a0, K0BASE;							\
+	move	a2, t2;		/* icacheSize */				\
+	move	a3, t4;		/* icacheLineSize */				\
+	move	a1, a2;								\
+	icacheop(a0,a1,a2,a3,(Index_Store_Tag_I));				\
+										\
+	/* clear WST bit */							\
+	mfc0	a0, CP0_ECC;							\
+	li	a1, ~ECCF_WST;							\
+	and	a0, a1;								\
+	mtc0	a0, CP0_ECC;							\
+										\
+	/* 1: initialise dcache tags. */					\
+										\
+	/* cache line size */							\
+	li	a2, CFG_CACHELINE_SIZE;						\
+	/* kseg0 mem address */							\
+	li	a1, 0;								\
+	li	a3, CFG_CACHE_SETS * CFG_CACHE_WAYS;				\
+1:										\
+	/* store tag (invalid, not locked) */					\
+	cache 0x8, 0(a1);							\
+	cache 0x9, 0(a1);							\
+										\
+	add	a3, -1;								\
+	bne	a3, zero, 1b;							\
+	add	a1, a2;								\
+										\
+	/* set WST bit */							\
+	mfc0	a0, CP0_ECC;							\
+	li	a1, ECCF_WST;							\
+	or	a0, a1;								\
+	mtc0	a0, CP0_ECC;							\
+										\
+	li	a0, K0BASE;							\
+	move	a2, t3;		/* dcacheSize */				\
+	move	a3, t5;		/* dcacheLineSize */				\
+	move	a1, a2;								\
+	icacheop(a0,a1,a2,a3,(Index_Store_Tag_D));				\
+										\
+	/* clear WST bit */							\
+	mfc0	a0, CP0_ECC;							\
+	li	a1, ~ECCF_WST;							\
+	and	a0, a1;								\
+	mtc0	a0, CP0_ECC;
+
diff --git a/package/uboot-lantiq/files/drivers/net/ifx_etop.c b/package/uboot-lantiq/files/drivers/net/ifx_etop.c
new file mode 100644
index 0000000..9a9e51f
--- /dev/null
+++ b/package/uboot-lantiq/files/drivers/net/ifx_etop.c
@@ -0,0 +1,374 @@
+/*
+ * Lantiq CPE device ethernet driver.
+ * Supposed to work on Twinpass/Danube.
+ *
+ * Based on INCA-IP driver:
+ * (C) Copyright 2003-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2010
+ * Thomas Langer, Ralph Hempel 
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#include <malloc.h>
+#include <net.h>
+#include <miiphy.h>
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/addrspace.h>
+
+#include "ifx_etop.h"
+
+#define TX_CHAN_NO   7
+#define RX_CHAN_NO   6
+
+#define NUM_RX_DESC	PKTBUFSRX
+#define NUM_TX_DESC	8
+#define TOUT_LOOP	100
+
+typedef struct
+{
+	union
+	{
+		struct
+		{
+			volatile u32 OWN	:1;
+			volatile u32 C		:1;
+			volatile u32 Sop	:1;
+			volatile u32 Eop	:1;
+			volatile u32 reserved	:3;
+			volatile u32 Byteoffset	:2;
+			volatile u32 reserve	:7;
+			volatile u32 DataLen	:16;
+		}field;
+
+		volatile u32 word;
+	}status;
+
+	volatile u32 DataPtr;
+} dma_rx_descriptor_t;
+
+typedef struct
+{
+	union
+	{
+		struct
+		{
+			volatile u32 OWN	:1;
+			volatile u32 C		:1;
+			volatile u32 Sop	:1;
+			volatile u32 Eop	:1;
+			volatile u32 Byteoffset	:5;
+			volatile u32 reserved	:7;
+			volatile u32 DataLen	:16;
+		}field;
+
+		volatile u32 word;
+	}status;
+
+	volatile u32 DataPtr;
+} dma_tx_descriptor_t;
+
+static volatile dma_rx_descriptor_t rx_des_ring[NUM_RX_DESC] __attribute__ ((aligned(8)));
+static volatile dma_tx_descriptor_t tx_des_ring[NUM_TX_DESC] __attribute__ ((aligned(8)));
+static int tx_num, rx_num;
+
+static volatile IfxDMA_t *pDma = (IfxDMA_t *)CKSEG1ADDR(DANUBE_DMA_BASE);
+
+static int lq_eth_init(struct eth_device *dev, bd_t * bis);
+static int lq_eth_send(struct eth_device *dev, volatile void *packet,int length);
+static int lq_eth_recv(struct eth_device *dev);
+static void lq_eth_halt(struct eth_device *dev);
+static void lq_eth_init_chip(void);
+static void lq_eth_init_dma(void);
+
+static int lq_eth_miiphy_read(char *devname, u8 phyAddr, u8 regAddr, u16 * retVal)
+{
+	u32 timeout = 50000;
+	u32 phy, reg;
+
+	if ((phyAddr > 0x1F) || (regAddr > 0x1F) || (retVal == NULL))
+		return -1;
+
+	phy = (phyAddr & 0x1F) << 21;
+	reg = (regAddr & 0x1F) << 16;
+
+	*ETOP_MDIO_ACC = 0xC0000000 | phy | reg;
+	while ((timeout--) && (*ETOP_MDIO_ACC & 0x80000000))
+		udelay(10);
+
+	if (timeout==0) {
+		*retVal = 0;
+		return -1;
+	}
+	*retVal = *ETOP_MDIO_ACC & 0xFFFF;
+	return 0;
+}
+
+static int lq_eth_miiphy_write(char *devname, u8 phyAddr, u8 regAddr, u16 data)
+{
+	u32 timeout = 50000;
+	u32 phy, reg;
+
+	if ((phyAddr > 0x1F) || (regAddr > 0x1F))
+		return -1;
+
+	phy = (phyAddr & 0x1F) << 21;
+	reg = (regAddr & 0x1F) << 16;
+
+	*ETOP_MDIO_ACC = 0x80000000 | phy | reg | data;
+	while ((timeout--) && (*ETOP_MDIO_ACC & 0x80000000))
+		udelay(10);
+
+	if (timeout==0)
+		return -1;
+	return 0;
+}
+
+
+int lq_eth_initialize(bd_t * bis)
+{
+	struct eth_device *dev;
+
+	debug("Entered lq_eth_initialize()\n");
+
+	if (!(dev = malloc (sizeof *dev))) {
+		printf("Failed to allocate memory\n");
+		return -1;
+	}
+	memset(dev, 0, sizeof(*dev));
+
+	sprintf(dev->name, "lq_cpe_eth");
+	dev->init = lq_eth_init;
+	dev->halt = lq_eth_halt;
+	dev->send = lq_eth_send;
+	dev->recv = lq_eth_recv;
+
+	eth_register(dev);
+
+#if defined (CONFIG_MII) || defined(CONFIG_CMD_MII)
+	/* register mii command access routines */
+	miiphy_register(dev->name,
+			lq_eth_miiphy_read, lq_eth_miiphy_write);
+#endif
+
+	lq_eth_init_dma();
+	lq_eth_init_chip();
+
+	return 0;
+}
+
+static int lq_eth_init(struct eth_device *dev, bd_t * bis)
+{
+	int i;
+	uchar *enetaddr = dev->enetaddr;
+
+	debug("lq_eth_init %x:%x:%x:%x:%x:%x\n",
+		enetaddr[0], enetaddr[1], enetaddr[2], enetaddr[3], enetaddr[4], enetaddr[5]);
+
+	*ENET_MAC_DA0 = (enetaddr[0]<<24) + (enetaddr[1]<<16) + (enetaddr[2]<< 8) + enetaddr[3];
+	*ENET_MAC_DA1 = (enetaddr[4]<<24) + (enetaddr[5]<<16);
+	*ENETS_CFG |= 1<<28;	/* enable filter for unicast packets */
+
+	tx_num=0;
+	rx_num=0;
+
+	for(i=0;i < NUM_RX_DESC; i++) {
+		dma_rx_descriptor_t * rx_desc = (dma_rx_descriptor_t *)CKSEG1ADDR(&rx_des_ring[i]);
+		rx_desc->status.word=0;
+		rx_desc->status.field.OWN=1;
+		rx_desc->status.field.DataLen=PKTSIZE_ALIGN;   /* 1536  */
+		rx_desc->DataPtr=(u32)CKSEG1ADDR(NetRxPackets[i]);
+		NetRxPackets[i][0] = 0xAA;
+	}
+
+	/* Reset DMA */
+	dma_writel(dma_cs, RX_CHAN_NO);
+	dma_writel(dma_cctrl, 0x2);/*fix me, need to reset this channel first?*/
+	dma_writel(dma_cpoll, 0x80000040);
+	/*set descriptor base*/
+	dma_writel(dma_cdba, (u32)rx_des_ring);
+	dma_writel(dma_cdlen, NUM_RX_DESC);
+	dma_writel(dma_cie, 0);
+	dma_writel(dma_cctrl, 0x30000);
+
+	for(i=0;i < NUM_TX_DESC; i++) {
+		dma_tx_descriptor_t * tx_desc = (dma_tx_descriptor_t *)CKSEG1ADDR(&tx_des_ring[i]);
+		memset(tx_desc, 0, sizeof(tx_des_ring[0]));
+	}
+
+	dma_writel(dma_cs, TX_CHAN_NO);
+	dma_writel(dma_cctrl, 0x2);/*fix me, need to reset this channel first?*/
+	dma_writel(dma_cpoll, 0x80000040);
+	dma_writel(dma_cdba, (u32)tx_des_ring);
+	dma_writel(dma_cdlen, NUM_TX_DESC);
+	dma_writel(dma_cie, 0);
+	dma_writel(dma_cctrl, 0x30100);
+
+	/* turn on DMA rx & tx channel
+	*/
+	dma_writel(dma_cs, RX_CHAN_NO);
+	dma_writel(dma_cctrl, dma_readl(dma_cctrl) | 1); /*reset and turn on the channel*/
+
+	return 0;
+}
+
+static void lq_eth_halt(struct eth_device *dev)
+{
+	int i;
+
+	debug("lq_eth_halt()\n");
+
+	for(i=0;i<8;i++) {
+		dma_writel(dma_cs, i);
+		dma_writel(dma_cctrl, dma_readl(dma_cctrl) & ~1);/*stop the dma channel*/
+	}
+}
+
+static int lq_eth_send(struct eth_device *dev, volatile void *packet,int length)
+{
+	int i;
+	int res = -1;
+	volatile dma_tx_descriptor_t * tx_desc = (dma_tx_descriptor_t *)CKSEG1ADDR(&tx_des_ring[tx_num]);
+
+	if (length <= 0) {
+		printf ("%s: bad packet size: %d\n", dev->name, length);
+		goto Done;
+	}
+
+	for(i=0; tx_desc->status.field.OWN==1; i++) {
+		if (i>=TOUT_LOOP) {
+			printf("NO Tx Descriptor...");
+			goto Done;
+		}
+	}
+
+	tx_desc->status.field.Sop=1;
+	tx_desc->status.field.Eop=1;
+	tx_desc->status.field.C=0;
+	tx_desc->DataPtr = (u32)CKSEG1ADDR(packet);
+	if (length<60)
+		tx_desc->status.field.DataLen = 60;
+	else
+		tx_desc->status.field.DataLen = (u32)length;
+
+	flush_cache((u32)packet, tx_desc->status.field.DataLen);
+	tx_desc->status.field.OWN=1;
+
+	res=length;
+	tx_num++;
+	if (tx_num==NUM_TX_DESC) tx_num=0;
+
+	dma_writel(dma_cs, TX_CHAN_NO);
+	if (!(dma_readl(dma_cctrl) & 1)) {
+		dma_writel(dma_cctrl, dma_readl(dma_cctrl) | 1);
+	}
+
+Done:
+	return res;
+}
+
+static int lq_eth_recv(struct eth_device *dev)
+{
+	int length  = 0;
+	volatile dma_rx_descriptor_t * rx_desc;
+
+	rx_desc = (dma_rx_descriptor_t *)CKSEG1ADDR(&rx_des_ring[rx_num]);
+
+	if ((rx_desc->status.field.C == 0) || (rx_desc->status.field.OWN == 1)) {
+		return 0;
+	}
+	length = rx_desc->status.field.DataLen;
+	if (length > 4) {
+		invalidate_dcache_range((u32)CKSEG0ADDR(rx_desc->DataPtr), (u32) CKSEG0ADDR(rx_desc->DataPtr) + length);
+		NetReceive(NetRxPackets[rx_num], length);
+	} else {
+		printf("ERROR: Invalid rx packet length.\n");
+	}
+
+	rx_desc->status.field.Sop=0;
+	rx_desc->status.field.Eop=0;
+	rx_desc->status.field.C=0;
+	rx_desc->status.field.DataLen=PKTSIZE_ALIGN;
+	rx_desc->status.field.OWN=1;
+
+	rx_num++;
+	if (rx_num == NUM_RX_DESC)
+		rx_num=0;
+
+	return length;
+}
+
+static void lq_eth_init_chip(void)
+{
+	*ETOP_MDIO_CFG &= ~0x6;
+	*ENET_MAC_CFG = 0x187;
+
+	// turn on port0, set to rmii and turn off port1.
+#ifdef CONFIG_RMII
+	*ETOP_CFG = (*ETOP_CFG & 0xFFFFFFFC) | 0x0000000A;
+#else
+	*ETOP_CFG = (*ETOP_CFG & 0xFFFFFFFC) | 0x00000008;
+#endif
+
+	*ETOP_IG_PLEN_CTRL = 0x004005EE; // set packetlen.
+	*ENET_MAC_CFG |= 1<<11; /*enable the crc*/
+	return;
+}
+
+static void lq_eth_init_dma(void)
+{
+	/* Reset DMA */
+	dma_writel(dma_ctrl, dma_readl(dma_ctrl) | 1);
+	dma_writel(dma_irnen, 0);/*disable all the interrupts first*/
+
+	/* Clear Interrupt Status Register */
+	dma_writel(dma_irncr, 0xfffff);
+	/*disable all the dma interrupts*/
+	dma_writel(dma_irnen, 0);
+	/*disable channel 0 and channel 1 interrupts*/
+
+	dma_writel(dma_cs, RX_CHAN_NO);
+	dma_writel(dma_cctrl, 0x2);/*fix me, need to reset this channel first?*/
+	dma_writel(dma_cpoll, 0x80000040);
+	/*set descriptor base*/
+	dma_writel(dma_cdba, (u32)rx_des_ring);
+	dma_writel(dma_cdlen, NUM_RX_DESC);
+	dma_writel(dma_cie, 0);
+	dma_writel(dma_cctrl, 0x30000);
+
+	dma_writel(dma_cs, TX_CHAN_NO);
+	dma_writel(dma_cctrl, 0x2);/*fix me, need to reset this channel first?*/
+	dma_writel(dma_cpoll, 0x80000040);
+	dma_writel(dma_cdba, (u32)tx_des_ring);
+	dma_writel(dma_cdlen, NUM_TX_DESC);
+	dma_writel(dma_cie, 0);
+	dma_writel(dma_cctrl, 0x30100);
+	/*enable the poll function and set the poll counter*/
+	//dma_writel(DMA_CPOLL=DANUBE_DMA_POLL_EN | (DANUBE_DMA_POLL_COUNT<<4);
+	/*set port properties, enable endian conversion for switch*/
+	dma_writel(dma_ps, 0);
+	dma_writel(dma_pctrl, dma_readl(dma_pctrl) | (0xf<<8));/*enable 32 bit endian conversion*/
+
+	return;
+}
diff --git a/package/uboot-lantiq/files/drivers/net/ifx_etop.h b/package/uboot-lantiq/files/drivers/net/ifx_etop.h
new file mode 100644
index 0000000..9970868
--- /dev/null
+++ b/package/uboot-lantiq/files/drivers/net/ifx_etop.h
@@ -0,0 +1,91 @@
+/*
+ * Lantiq switch ethernet driver for Danube family.
+ *
+ * Based on INCA-IP driver:
+ * (C) Copyright 2003-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __DRIVERS_IFX_SW_H__
+#define __DRIVERS_IFX_SW_H__
+
+#define DANUBE_PPE32_BASE  0xBE180000
+#define DANUBE_PPE32_DATA_MEM_MAP_REG_BASE   (DANUBE_PPE32_BASE + (0x4000 * 4))
+
+#define ETOP_MDIO_CFG           ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0600 * 4)))
+#define ETOP_MDIO_ACC           ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0601 * 4)))
+#define ETOP_CFG                ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0602 * 4)))
+#define ETOP_IG_VLAN_COS        ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0603 * 4)))
+#define ETOP_IG_DSCP_COS3       ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0604 * 4)))
+#define ETOP_IG_DSCP_COS2       ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0605 * 4)))
+#define ETOP_IG_DSCP_COS1       ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0606 * 4)))
+#define ETOP_IG_DSCP_COS0       ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0607 * 4)))
+#define ETOP_IG_PLEN_CTRL       ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0608 * 4)))
+#define ETOP_ISR                ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060A * 4)))
+#define ETOP_IER                ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060B * 4)))
+#define ETOP_VPID               ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060C * 4)))
+#define ENET_MAC_CFG            ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0610 * 4)))
+#define ENETS_DBA               ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0612 * 4)))
+#define ENETS_CBA               ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0613 * 4)))
+#define ENETS_CFG               ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0614 * 4)))
+#define ENETS_PGCNT             ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0615 * 4)))
+#define ENETS_PKTCNT            ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0616 * 4)))
+#define ENETS_BUF_CTRL          ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0617 * 4)))
+#define ENETS_COS_CFG           ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0618 * 4)))
+#define ENETS_IGDROP            ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0619 * 4)))
+#define ENETS_IGERR             ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x061A * 4)))
+#define ENET_MAC_DA0            ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x061B * 4)))
+#define ENET_MAC_DA1            ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x061C * 4)))
+
+
+
+#define DANUBE_DMA_BASE                 0xBE104100
+
+typedef struct IfxDMA_s
+{
+	unsigned long  dma_clc;                            /*0x0000*/
+	unsigned long  dma_rsvd1[1];   /* for mapping */   /*0x0004*/
+	unsigned long  dma_id;                             /*0x0008*/
+	unsigned long  dma_rsvd2[1];   /* for mapping */   /*0x000C*/
+	unsigned long  dma_ctrl;                           /*0x0010*/
+	unsigned long  dma_cpoll;                          /*0x0014*/
+	unsigned long  dma_cs;                             /*0x0018*/
+	unsigned long  dma_cctrl;                          /*0x001C*/
+	unsigned long  dma_cdba;                           /*0x0020*/
+	unsigned long  dma_cdlen;                          /*0x0024*/
+	unsigned long  dma_cis;                            /*0x0028*/
+	unsigned long  dma_cie;                            /*0x002C*/
+	unsigned long  dma_rsvd3[4];   /* for mapping */   /*0x0030*/
+	unsigned long  dma_ps;                             /*0x0040*/
+	unsigned long  dma_pctrl;                          /*0x0044*/
+	unsigned long  dma_rsvd4[43];  /* for mapping */   /*0x0048*/
+	unsigned long  dma_irnen;                          /*0x00F4*/
+	unsigned long  dma_irncr;                          /*0x00F8*/
+	unsigned long  dma_irnicr;                         /*0x00FC*/
+} IfxDMA_t;
+
+/* Register access macros */
+#define dma_readl(reg)				\
+	readl(&pDma->reg)
+#define dma_writel(reg,value)			\
+	writel((value), &pDma->reg)
+
+int lq_eth_initialize(bd_t * bis);
+
+#endif /* __DRIVERS_IFX_SW_H__ */
diff --git a/package/uboot-lantiq/files/drivers/serial/ifx_asc.c b/package/uboot-lantiq/files/drivers/serial/ifx_asc.c
new file mode 100644
index 0000000..5c13f26
--- /dev/null
+++ b/package/uboot-lantiq/files/drivers/serial/ifx_asc.c
@@ -0,0 +1,218 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * (C) Copyright 2009
+ * Infineon Technologies AG, http://www.infineon.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/addrspace.h>
+
+#include "ifx_asc.h"
+
+#define SET_BIT(reg, mask)			asc_writel(reg, asc_readl(reg) | (mask))
+#define CLEAR_BIT(reg, mask)			asc_writel(reg, asc_readl(reg) & (~mask))
+#define SET_BITFIELD(reg, mask, off, val)	asc_writel(reg, (asc_readl(reg) & (~mask)) | (val << off) )
+
+#undef DEBUG_ASC_RAW
+#ifdef DEBUG_ASC_RAW
+#define DEBUG_ASC_RAW_RX_BUF			0xA0800000
+#define DEBUG_ASC_RAW_TX_BUF			0xA0900000
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static IfxAsc_t *pAsc = (IfxAsc_t *)CKSEG1ADDR(CONFIG_SYS_IFX_ASC_BASE);
+
+/*
+ *             FDV            fASC
+ * BaudRate = ----- * --------------------
+ *             512    16 * (ReloadValue+1)
+ */
+
+/*
+ *                  FDV          fASC
+ * ReloadValue = ( ----- * --------------- ) - 1
+ *                  512     16 * BaudRate
+ */
+static void serial_divs(u32 baudrate, u32 fasc, u32 *pfdv, u32 *preload)
+{
+   u32 clock = fasc / 16;
+
+   u32 fdv; /* best fdv */
+   u32 reload = 0; /* best reload */
+   u32 diff; /* smallest diff */
+   u32 idiff; /* current diff */
+   u32 ireload; /* current reload */
+   u32 i; /* current fdv */
+   u32 result; /* current resulting baudrate */
+
+   if (clock > 0x7FFFFF)
+      clock /= 512;
+   else
+      baudrate *= 512;
+
+   fdv = 512; /* start with 1:1 fraction */
+   diff = baudrate; /* highest possible */
+
+   /* i is the test fdv value -- start with the largest possible */
+   for (i = 512; i > 0; i--)
+   {
+      ireload = (clock * i) / baudrate;
+      if (ireload < 1)
+         break; /* already invalid */
+      result = (clock * i) / ireload;
+
+      idiff = (result > baudrate) ? (result - baudrate) : (baudrate - result);
+      if (idiff == 0)
+      {
+         fdv = i;
+         reload = ireload;
+         break; /* can't do better */
+      }
+      else if (idiff < diff)
+      {
+         fdv = i; /* best so far */
+         reload = ireload;
+         diff = idiff; /* update lowest diff*/
+      }
+   }
+
+   *pfdv = (fdv == 512) ? 0 : fdv;
+   *preload = reload - 1;
+}
+
+
+void serial_setbrg (void)
+{
+	u32 ReloadValue, fdv;
+
+	serial_divs(gd->baudrate, get_bus_freq(0), &fdv, &ReloadValue);
+
+	/* Disable Baud Rate Generator; BG should only be written when R=0 */
+	CLEAR_BIT(asc_con, ASCCON_R);
+
+	/* Enable Fractional Divider */
+	SET_BIT(asc_con, ASCCON_FDE);	/* FDE = 1 */
+
+	/* Set fractional divider value */
+	asc_writel(asc_fdv, fdv & ASCFDV_VALUE_MASK);
+
+	/* Set reload value in BG */
+	asc_writel(asc_bg, ReloadValue);
+
+	/* Enable Baud Rate Generator */
+	SET_BIT(asc_con, ASCCON_R);	/* R = 1 */
+}
+
+
+int serial_init (void)
+{
+
+	/* and we have to set CLC register*/
+	CLEAR_BIT(asc_clc, ASCCLC_DISS);
+	SET_BITFIELD(asc_clc, ASCCLC_RMCMASK, ASCCLC_RMCOFFSET, 0x0001);
+
+	/* initialy we are in async mode */
+	asc_writel(asc_con, ASCCON_M_8ASYNC);
+
+	/* select input port */
+	asc_writel(asc_pisel, CONSOLE_TTY & 0x1);
+
+	/* TXFIFO's filling level */
+	SET_BITFIELD(asc_txfcon, ASCTXFCON_TXFITLMASK,
+			ASCTXFCON_TXFITLOFF, ASC_TXFIFO_FL);
+	/* enable TXFIFO */
+	SET_BIT(asc_txfcon, ASCTXFCON_TXFEN);
+
+	/* RXFIFO's filling level */
+	SET_BITFIELD(asc_txfcon, ASCRXFCON_RXFITLMASK,
+			ASCRXFCON_RXFITLOFF, ASC_RXFIFO_FL);
+	/* enable RXFIFO */
+	SET_BIT(asc_rxfcon, ASCRXFCON_RXFEN);
+
+	/* set baud rate */
+	serial_setbrg();
+
+	/* enable error signals &  Receiver enable  */
+	SET_BIT(asc_whbstate, ASCWHBSTATE_SETREN|ASCCON_FEN|ASCCON_TOEN|ASCCON_ROEN);
+
+	return 0;
+}
+
+
+void serial_putc (const char c)
+{
+	u32 txFl = 0;
+#ifdef DEBUG_ASC_RAW
+	static u8 * debug = (u8 *) DEBUG_ASC_RAW_TX_BUF;
+	*debug++=c;
+#endif
+	if (c == '\n')
+		serial_putc ('\r');
+	/* check do we have a free space in the TX FIFO */
+	/* get current filling level */
+	do {
+		txFl = ( asc_readl(asc_fstat) & ASCFSTAT_TXFFLMASK ) >> ASCFSTAT_TXFFLOFF;
+	}
+	while ( txFl == ASC_TXFIFO_FULL );
+
+	asc_writel(asc_tbuf, c); /* write char to Transmit Buffer Register */
+
+	/* check for errors */
+	if ( asc_readl(asc_state) & ASCSTATE_TOE ) {
+		SET_BIT(asc_whbstate, ASCWHBSTATE_CLRTOE);
+		return;
+	}
+}
+
+void serial_puts (const char *s)
+{
+	while (*s) {
+		serial_putc (*s++);
+	}
+}
+
+int serial_getc (void)
+{
+	char c;
+	while ((asc_readl(asc_fstat) & ASCFSTAT_RXFFLMASK) == 0 );
+	c = (char)(asc_readl(asc_rbuf) & 0xff);
+
+#ifdef 	DEBUG_ASC_RAW
+	static u8* debug=(u8*)(DEBUG_ASC_RAW_RX_BUF);
+	*debug++=c;
+#endif
+	return c;
+}
+
+
+int serial_tstc (void)
+{
+	int res = 1;
+
+	if ( (asc_readl(asc_fstat) & ASCFSTAT_RXFFLMASK) == 0 ) {
+		res = 0;
+	}
+	return res;
+}
diff --git a/package/uboot-lantiq/files/drivers/serial/ifx_asc.h b/package/uboot-lantiq/files/drivers/serial/ifx_asc.h
new file mode 100644
index 0000000..2d3a49e
--- /dev/null
+++ b/package/uboot-lantiq/files/drivers/serial/ifx_asc.h
@@ -0,0 +1,199 @@
+/*****************************************************************************
+ * DANUBE BootROM
+ * Copyright (c) 2005, Infineon Technologies AG, All rights reserved
+ * IFAP DC COM SD
+ *****************************************************************************/
+#ifndef __ASC_H
+#define __ASC_H
+
+/* channel operating modes */
+#define	ASCOPT_CSIZE		0x00000003
+#define	ASCOPT_CS7		0x00000001
+#define	ASCOPT_CS8		0x00000002
+#define	ASCOPT_PARENB		0x00000004
+#define	ASCOPT_STOPB		0x00000008
+#define	ASCOPT_PARODD		0x00000010
+#define	ASCOPT_CREAD		0x00000020
+
+#define ASC_OPTIONS		(ASCOPT_CREAD | ASCOPT_CS8)
+
+/* ASC input select (0 or 1) */
+#define CONSOLE_TTY		0
+
+#define ASC_TXFIFO_FL		1
+#define ASC_RXFIFO_FL		1
+#define ASC_TXFIFO_FULL		16
+
+/* CLC register's bits and bitfields */
+#define ASCCLC_DISR		0x00000001
+#define ASCCLC_DISS		0x00000002
+#define ASCCLC_RMCMASK		0x0000FF00
+#define ASCCLC_RMCOFFSET	8
+
+/* CON register's bits and bitfields */
+#define ASCCON_MODEMASK		0x0000000f
+#define ASCCON_M_8ASYNC		0x0
+#define ASCCON_M_8IRDA		0x1
+#define ASCCON_M_7ASYNC		0x2
+#define ASCCON_M_7IRDA		0x3
+#define ASCCON_WLSMASK		0x0000000c
+#define ASCCON_WLSOFFSET	2
+#define ASCCON_WLS_8BIT		0x0
+#define ASCCON_WLS_7BIT		0x1
+#define ASCCON_PEN		0x00000010
+#define ASCCON_ODD		0x00000020
+#define ASCCON_SP		0x00000040
+#define ASCCON_STP		0x00000080
+#define ASCCON_BRS		0x00000100
+#define ASCCON_FDE		0x00000200
+#define ASCCON_ERRCLK		0x00000400
+#define ASCCON_EMMASK		0x00001800
+#define ASCCON_EMOFFSET		11
+#define ASCCON_EM_ECHO_OFF	0x0
+#define ASCCON_EM_ECHO_AB	0x1
+#define ASCCON_EM_ECHO_ON	0x2
+#define ASCCON_LB		0x00002000
+#define ASCCON_ACO 		0x00004000
+#define ASCCON_R		0x00008000
+#define ASCCON_PAL		0x00010000
+#define ASCCON_FEN		0x00020000
+#define ASCCON_RUEN		0x00040000
+#define ASCCON_ROEN		0x00080000
+#define ASCCON_TOEN		0x00100000
+#define ASCCON_BEN		0x00200000
+#define ASCCON_TXINV		0x01000000
+#define ASCCON_RXINV		0x02000000
+#define ASCCON_TXMSB		0x04000000
+#define ASCCON_RXMSB		0x08000000
+
+/* STATE register's bits and bitfields */
+#define ASCSTATE_REN		0x00000001
+#define ASCSTATE_PE		0x00010000
+#define ASCSTATE_FE		0x00020000
+#define ASCSTATE_RUE		0x00040000
+#define ASCSTATE_ROE		0x00080000
+#define ASCSTATE_TOE		0x00100000
+#define ASCSTATE_BE		0x00200000
+#define ASCSTATE_TXBVMASK	0x07000000
+#define ASCSTATE_TXBVOFFSET	24
+#define ASCSTATE_TXEOM		0x08000000
+#define ASCSTATE_RXBVMASK	0x70000000
+#define ASCSTATE_RXBVOFFSET	28
+#define ASCSTATE_RXEOM		0x80000000
+
+/* WHBSTATE register's bits and bitfields */
+#define ASCWHBSTATE_CLRREN	0x00000001
+#define ASCWHBSTATE_SETREN	0x00000002
+#define ASCWHBSTATE_CLRPE	0x00000004
+#define ASCWHBSTATE_CLRFE	0x00000008
+#define ASCWHBSTATE_CLRRUE	0x00000010
+#define ASCWHBSTATE_CLRROE	0x00000020
+#define ASCWHBSTATE_CLRTOE	0x00000040
+#define ASCWHBSTATE_CLRBE	0x00000080
+#define ASCWHBSTATE_SETPE	0x00000100
+#define ASCWHBSTATE_SETFE	0x00000200
+#define ASCWHBSTATE_SETRUE	0x00000400
+#define ASCWHBSTATE_SETROE	0x00000800
+#define ASCWHBSTATE_SETTOE	0x00001000
+#define ASCWHBSTATE_SETBE	0x00002000
+
+/* ABCON register's bits and bitfields */
+#define ASCABCON_ABEN		0x0001
+#define ASCABCON_AUREN		0x0002
+#define ASCABCON_ABSTEN		0x0004
+#define ASCABCON_ABDETEN	0x0008
+#define ASCABCON_FCDETEN	0x0010
+
+/* FDV register mask, offset and bitfields*/
+#define ASCFDV_VALUE_MASK	0x000001FF
+
+/* WHBABCON register's bits and bitfields */
+#define ASCWHBABCON_CLRABEN	0x0001
+#define ASCWHBABCON_SETABEN	0x0002
+
+/* ABSTAT register's bits and bitfields */
+#define ASCABSTAT_FCSDET	0x0001
+#define ASCABSTAT_FCCDET	0x0002
+#define ASCABSTAT_SCSDET	0x0004
+#define ASCABSTAT_SCCDET	0x0008
+#define ASCABSTAT_DETWAIT	0x0010
+
+/* WHBABSTAT register's bits and bitfields */
+#define ASCWHBABSTAT_CLRFCSDET	0x0001
+#define ASCWHBABSTAT_SETFCSDET	0x0002
+#define ASCWHBABSTAT_CLRFCCDET	0x0004
+#define ASCWHBABSTAT_SETFCCDET	0x0008
+#define ASCWHBABSTAT_CLRSCSDET	0x0010
+#define ASCWHBABSTAT_SETSCSDET	0x0020
+#define ASCWHBABSTAT_CLRSCCDET	0x0040
+#define ASCWHBABSTAT_SETSCCDET	0x0080
+#define ASCWHBABSTAT_CLRDETWAIT	0x0100
+#define ASCWHBABSTAT_SETDETWAIT	0x0200
+
+/* TXFCON register's bits and bitfields */
+#define ASCTXFCON_TXFIFO1       0x00000400
+#define ASCTXFCON_TXFEN         0x0001
+#define ASCTXFCON_TXFFLU        0x0002
+#define ASCTXFCON_TXFITLMASK    0x3F00
+#define ASCTXFCON_TXFITLOFF     8
+
+/* RXFCON register's bits and bitfields */
+#define ASCRXFCON_RXFIFO1       0x00000400
+#define ASCRXFCON_RXFEN         0x0001
+#define ASCRXFCON_RXFFLU        0x0002
+#define ASCRXFCON_RXFITLMASK    0x3F00
+#define ASCRXFCON_RXFITLOFF     8
+
+/* FSTAT register's bits and bitfields */
+#define ASCFSTAT_RXFFLMASK      0x003F
+#define ASCFSTAT_TXFFLMASK      0x3F00
+#define ASCFSTAT_TXFFLOFF       8
+
+typedef struct IfxAsc_s
+{
+	unsigned long  asc_clc;                            /*0x0000*/
+	unsigned long  asc_pisel;                          /*0x0004*/
+	unsigned long  asc_id;                             /*0x0008*/
+	unsigned long  asc_rsvd1[1];   /* for mapping */   /*0x000C*/
+	unsigned long  asc_con;                            /*0x0010*/
+	unsigned long  asc_state;                          /*0x0014*/
+	unsigned long  asc_whbstate;                       /*0x0018*/
+	unsigned long  asc_rsvd2[1];   /* for mapping */   /*0x001C*/
+	unsigned long  asc_tbuf;                           /*0x0020*/
+	unsigned long  asc_rbuf;                           /*0x0024*/
+	unsigned long  asc_rsvd3[2];   /* for mapping */   /*0x0028*/
+	unsigned long  asc_abcon;                          /*0x0030*/
+	unsigned long  asc_abstat;     /* not used */      /*0x0034*/
+	unsigned long  asc_whbabcon;                       /*0x0038*/
+	unsigned long  asc_whbabstat;  /* not used */      /*0x003C*/
+	unsigned long  asc_rxfcon;                         /*0x0040*/
+	unsigned long  asc_txfcon;                         /*0x0044*/
+	unsigned long  asc_fstat;                          /*0x0048*/
+	unsigned long  asc_rsvd4[1];   /* for mapping */   /*0x004C*/
+	unsigned long  asc_bg;                             /*0x0050*/
+	unsigned long  asc_bg_timer;                       /*0x0054*/
+	unsigned long  asc_fdv;                            /*0x0058*/
+	unsigned long  asc_pmw;                            /*0x005C*/
+	unsigned long  asc_modcon;                         /*0x0060*/
+	unsigned long  asc_modstat;                        /*0x0064*/
+	unsigned long  asc_rsvd5[2];   /* for mapping */   /*0x0068*/
+	unsigned long  asc_sfcc;                           /*0x0070*/
+	unsigned long  asc_rsvd6[3];   /* for mapping */   /*0x0074*/
+	unsigned long  asc_eomcon;                         /*0x0080*/
+	unsigned long  asc_rsvd7[26];   /* for mapping */  /*0x0084*/
+	unsigned long  asc_dmacon;                         /*0x00EC*/
+	unsigned long  asc_rsvd8[1];   /* for mapping */   /*0x00F0*/
+	unsigned long  asc_irnen;                          /*0x00F4*/
+	unsigned long  asc_irnicr;                         /*0x00F8*/
+	unsigned long  asc_irncr;                          /*0x00FC*/
+} IfxAsc_t;
+
+
+/* Register access macros */
+#define asc_readl(reg)				\
+	readl(&pAsc->reg)
+#define asc_writel(reg,value)			\
+	writel((value), &pAsc->reg)
+
+
+#endif /* __ASC_H */
diff --git a/package/uboot-lantiq/files/include/asm-mips/danube.h b/package/uboot-lantiq/files/include/asm-mips/danube.h
new file mode 100644
index 0000000..7caf8f7
--- /dev/null
+++ b/package/uboot-lantiq/files/include/asm-mips/danube.h
@@ -0,0 +1,2015 @@
+#ifndef DANUBE_H
+#define DANUBE_H
+/******************************************************************************
+       Copyright (c) 2002, Infineon Technologies.  All rights reserved.
+
+                               No Warranty
+   Because the program is licensed free of charge, there is no warranty for
+   the program, to the extent permitted by applicable law.  Except when
+   otherwise stated in writing the copyright holders and/or other parties
+   provide the program "as is" without warranty of any kind, either
+   expressed or implied, including, but not limited to, the implied
+   warranties of merchantability and fitness for a particular purpose. The
+   entire risk as to the quality and performance of the program is with
+   you.  should the program prove defective, you assume the cost of all
+   necessary servicing, repair or correction.
+
+   In no event unless required by applicable law or agreed to in writing
+   will any copyright holder, or any other party who may modify and/or
+   redistribute the program as permitted above, be liable to you for
+   damages, including any general, special, incidental or consequential
+   damages arising out of the use or inability to use the program
+   (including but not limited to loss of data or data being rendered
+   inaccurate or losses sustained by you or third parties or a failure of
+   the program to operate with any other programs), even if such holder or
+   other party has been advised of the possibility of such damages.
+******************************************************************************/
+
+/***********************************************************************/
+/*  Module      :  MEI register address and bits                       */
+/***********************************************************************/
+#define MEI_SPACE_ACCESS	0xB0100C00
+#define MEI_DATA_XFR				(0x0000 + MEI_SPACE_ACCESS)
+#define	MEI_VERSION				(0x0200 + MEI_SPACE_ACCESS)
+#define	ARC_GP_STAT				(0x0204 + MEI_SPACE_ACCESS)
+#define	MEI_XFR_ADDR				(0x020C + MEI_SPACE_ACCESS)
+#define	MEI_TO_ARC_INT				(0x021C + MEI_SPACE_ACCESS)
+#define	ARC_TO_MEI_INT				(0x0220 + MEI_SPACE_ACCESS)
+#define	ARC_TO_MEI_INT_MASK			(0x0224 + MEI_SPACE_ACCESS)
+#define	MEI_DEBUG_WAD				(0x0228 + MEI_SPACE_ACCESS)
+#define MEI_DEBUG_RAD				(0x022C + MEI_SPACE_ACCESS)
+#define	MEI_DEBUG_DATA				(0x0230 + MEI_SPACE_ACCESS)
+#define	MEI_DEBUG_DEC				(0x0234 + MEI_SPACE_ACCESS)
+#define	MEI_CONTROL				(0x0238 + MEI_SPACE_ACCESS)
+#define	AT_CELLRDY_BC0				(0x023C + MEI_SPACE_ACCESS)
+#define	AT_CELLRDY_BC1				(0x0240 + MEI_SPACE_ACCESS)
+#define	AR_CELLRDY_BC0				(0x0244 + MEI_SPACE_ACCESS)
+#define	AR_CELLRDY_BC1				(0x0248 + MEI_SPACE_ACCESS)
+#define	AAI_ACCESS				(0x024C + MEI_SPACE_ACCESS)
+#define	AAITXCB0				(0x0300 + MEI_SPACE_ACCESS)
+#define	AAITXCB1				(0x0304 + MEI_SPACE_ACCESS)
+#define	AAIRXCB0				(0x0308 + MEI_SPACE_ACCESS)
+#define	AAIRXCB1				(0x030C + MEI_SPACE_ACCESS)
+
+
+/***********************************************************************/
+/*  Module      :  WDT register address and bits                       */
+/***********************************************************************/
+#define DANUBE_BIU_WDT_BASE             (0xBf8803F0)
+#define DANUBE_BIU_WDT_CR     		(0x0000 + DANUBE_BIU_WDT_BASE)
+#define DANUBE_BIU_WDT_SR     		(0x0008 + DANUBE_BIU_WDT_BASE)
+
+
+/***********************************************************************/
+/*  Module      :  PMU register address and bits                       */
+/***********************************************************************/
+#define DANUBE_PMU_BASE_ADDR 				(KSEG1+0x1F102000)
+
+/***PM Control Register***/
+#define DANUBE_PMU_CR 					((volatile u32*)(0x001C + DANUBE_PMU_BASE_ADDR))
+#define DANUBE_PMU_PWDCR				DANUBE_PMU_CR
+#define DANUBE_PMU_SR 					((volatile u32*)(0x0020 + DANUBE_PMU_BASE_ADDR))
+
+#define DANUBE_PMU_DMA_SHIFT                    5
+#define DANUBE_PMU_PPE_SHIFT                    13
+#define DANUBE_PMU_ETOP_SHIFT                   22
+#define DANUBE_PMU_ENET0_SHIFT                  24
+#define DANUBE_PMU_ENET1_SHIFT                  25
+
+
+#define DANUBE_PMU 					DANUBE_PMU_BASE_ADDR
+/***PM Global Enable Register***/
+#define DANUBE_PMU_PM_GEN                       ((volatile u32*)(DANUBE_PMU+ 0x0000))
+#define DANUBE_PMU_PM_GEN_EN16                            (1 << 16)
+#define DANUBE_PMU_PM_GEN_EN15                            (1 << 15)
+#define DANUBE_PMU_PM_GEN_EN14                            (1 << 14)
+#define DANUBE_PMU_PM_GEN_EN13                            (1 << 13)
+#define DANUBE_PMU_PM_GEN_EN12                            (1 << 12)
+#define DANUBE_PMU_PM_GEN_EN11                            (1 << 11)
+#define DANUBE_PMU_PM_GEN_EN10                            (1 << 10)
+#define DANUBE_PMU_PM_GEN_EN9                              (1 << 9)
+#define DANUBE_PMU_PM_GEN_EN8                              (1 << 8)
+#define DANUBE_PMU_PM_GEN_EN7                              (1 << 7)
+#define DANUBE_PMU_PM_GEN_EN6                              (1 << 6)
+#define DANUBE_PMU_PM_GEN_EN5                              (1 << 5)
+#define DANUBE_PMU_PM_GEN_EN4                              (1 << 4)
+#define DANUBE_PMU_PM_GEN_EN3                              (1 << 3)
+#define DANUBE_PMU_PM_GEN_EN2                              (1 << 2)
+#define DANUBE_PMU_PM_GEN_EN0                              (1 << 0)
+
+/***PM Power Down Enable Register***/
+#define DANUBE_PMU_PM_PDEN                      ((volatile u32*)(DANUBE_PMU+ 0x0008))
+#define DANUBE_PMU_PM_PDEN_EN16                            (1 << 16)
+#define DANUBE_PMU_PM_PDEN_EN15                            (1 << 15)
+#define DANUBE_PMU_PM_PDEN_EN14                            (1 << 14)
+#define DANUBE_PMU_PM_PDEN_EN13                            (1 << 13)
+#define DANUBE_PMU_PM_PDEN_EN12                            (1 << 12)
+#define DANUBE_PMU_PM_PDEN_EN11                            (1 << 11)
+#define DANUBE_PMU_PM_PDEN_EN10                            (1 << 10)
+#define DANUBE_PMU_PM_PDEN_EN9                              (1 << 9)
+#define DANUBE_PMU_PM_PDEN_EN8                              (1 << 8)
+#define DANUBE_PMU_PM_PDEN_EN7                              (1 << 7)
+#define DANUBE_PMU_PM_PDEN_EN5                              (1 << 5)
+#define DANUBE_PMU_PM_PDEN_EN4                              (1 << 4)
+#define DANUBE_PMU_PM_PDEN_EN3                              (1 << 3)
+#define DANUBE_PMU_PM_PDEN_EN2                              (1 << 2)
+#define DANUBE_PMU_PM_PDEN_EN0                              (1 << 0)
+
+/***PM Wake-Up from Power Down Register***/
+#define DANUBE_PMU_PM_WUP                       ((volatile u32*)(DANUBE_PMU+ 0x0010))
+#define DANUBE_PMU_PM_WUP_WUP16                          (1 << 16)
+#define DANUBE_PMU_PM_WUP_WUP15                          (1 << 15)
+#define DANUBE_PMU_PM_WUP_WUP14                          (1 << 14)
+#define DANUBE_PMU_PM_WUP_WUP13                          (1 << 13)
+#define DANUBE_PMU_PM_WUP_WUP12                          (1 << 12)
+#define DANUBE_PMU_PM_WUP_WUP11                          (1 << 11)
+#define DANUBE_PMU_PM_WUP_WUP10                          (1 << 10)
+#define DANUBE_PMU_PM_WUP_WUP9                            (1 << 9)
+#define DANUBE_PMU_PM_WUP_WUP8                            (1 << 8)
+#define DANUBE_PMU_PM_PDEN_EN7                              (1 << 7)
+#define DANUBE_PMU_PM_PDEN_EN5                              (1 << 5)
+#define DANUBE_PMU_PM_PDEN_EN4                              (1 << 4)
+#define DANUBE_PMU_PM_PDEN_EN3                              (1 << 3)
+#define DANUBE_PMU_PM_PDEN_EN2                              (1 << 2)
+#define DANUBE_PMU_PM_PDEN_EN0                              (1 << 0)
+
+/***PM Wake-Up from Power Down Register***/
+#define DANUBE_PMU_PM_WUP                       ((volatile u32*)(DANUBE_PMU+ 0x0010))
+#define DANUBE_PMU_PM_WUP_WUP16                          (1 << 16)
+#define DANUBE_PMU_PM_WUP_WUP15                          (1 << 15)
+#define DANUBE_PMU_PM_WUP_WUP14                          (1 << 14)
+#define DANUBE_PMU_PM_WUP_WUP13                          (1 << 13)
+#define DANUBE_PMU_PM_WUP_WUP12                          (1 << 12)
+#define DANUBE_PMU_PM_WUP_WUP11                          (1 << 11)
+#define DANUBE_PMU_PM_WUP_WUP10                          (1 << 10)
+#define DANUBE_PMU_PM_WUP_WUP9                            (1 << 9)
+#define DANUBE_PMU_PM_WUP_WUP8                            (1 << 8)
+#define DANUBE_PMU_PM_WUP_WUP7                            (1 << 7)
+#define DANUBE_PMU_PM_WUP_WUP5                            (1 << 5)
+#define DANUBE_PMU_PM_WUP_WUP4                            (1 << 4)
+#define DANUBE_PMU_PM_WUP_WUP3                            (1 << 3)
+#define DANUBE_PMU_PM_WUP_WUP2                            (1 << 2)
+#define DANUBE_PMU_PM_WUP_WUP0                            (1 << 0)
+
+/***PM Control Register***/
+#define DANUBE_PMU_PM_CR                        ((volatile u32*)(DANUBE_PMU+ 0x0014))
+#define DANUBE_PMU_PM_CR_AWEN                            (1 << 31)
+#define DANUBE_PMU_PM_CR_SWRST                          (1 << 30)
+#define DANUBE_PMU_PM_CR_SWCR                            (1 << 2)
+#define DANUBE_PMU_PM_CR_CRD (value)                (((( 1 << 2) - 1) & (value)) << 0)
+
+/***********************************************************************/
+/*  Module      :  RCU register address and bits                       */
+/***********************************************************************/
+#define DANUBE_RCU_BASE_ADDR 		(0xBF203000)
+
+#define DANUBE_RCU_REQ 			(0x0010 + DANUBE_RCU_BASE_ADDR)
+#define DANUBE_RCU_RST_REQ                      ((volatile u32*)(DANUBE_RCU_REQ))
+#define DANUBE_RCU_STAT		        (0x0014 + DANUBE_RCU_BASE_ADDR)
+#define DANUBE_RCU_RST_SR	        ( (volatile u32 *)(DANUBE_RCU_STAT))
+#define DANUBE_RCU_PCI_RDY	        ( (volatile u32 *)(DANUBE_RCU_BASE_ADDR+0x28))
+#define DANUBE_RCU_MON                  (0x0030 + DANUBE_RCU_BASE_ADDR)
+
+
+/***********************************************************************/
+/*  Module      :  BCU  register address and bits                       */
+/***********************************************************************/
+#define DANUBE_BCU_BASE_ADDR 	(0xB0100000)
+/***BCU Control Register (0010H)***/
+#define DANUBE_BCU_CON 		(0x0010 + DANUBE_BCU_BASE_ADDR)
+#define DANUBE_BCU_BCU_CON_SPC (value)                (((( 1 << 8) - 1) & (value)) << 24)
+#define DANUBE_BCU_BCU_CON_SPE                              (1 << 19)
+#define DANUBE_BCU_BCU_CON_PSE                              (1 << 18)
+#define DANUBE_BCU_BCU_CON_DBG                              (1 << 16)
+#define DANUBE_BCU_BCU_CON_TOUT (value)               (((( 1 << 16) - 1) & (value)) << 0)
+
+
+/***BCU Error Control Capture Register (0020H)***/
+#define DANUBE_BCU_ECON 	(0x0020 + DANUBE_BCU_BASE_ADDR)
+#define DANUBE_BCU_BCU_ECON_TAG (value)                (((( 1 << 4) - 1) & (value)) << 24)
+#define DANUBE_BCU_BCU_ECON_RDN                              (1 << 23)
+#define DANUBE_BCU_BCU_ECON_WRN                              (1 << 22)
+#define DANUBE_BCU_BCU_ECON_SVM                              (1 << 21)
+#define DANUBE_BCU_BCU_ECON_ACK (value)                (((( 1 << 2) - 1) & (value)) << 19)
+#define DANUBE_BCU_BCU_ECON_ABT                              (1 << 18)
+#define DANUBE_BCU_BCU_ECON_RDY                              (1 << 17)
+#define DANUBE_BCU_BCU_ECON_TOUT                            (1 << 16)
+#define DANUBE_BCU_BCU_ECON_ERRCNT (value)             (((( 1 << 16) - 1) & (value)) << 0)
+#define DANUBE_BCU_BCU_ECON_OPC (value)                (((( 1 << 4) - 1) & (value)) << 28)
+
+/***BCU Error Address Capture Register (0024 H)***/
+#define DANUBE_BCU_EADD 	(0x0024 + DANUBE_BCU_BASE_ADDR)
+
+/***BCU Error Data Capture Register (0028H)***/
+#define DANUBE_BCU_EDAT 	(0x0028 + DANUBE_BCU_BASE_ADDR)
+
+#define DANUBE_BCU_IRNEN 	(0x00F4 + DANUBE_BCU_BASE_ADDR)
+#define DANUBE_BCU_IRNICR 	(0x00F8 + DANUBE_BCU_BASE_ADDR)
+#define DANUBE_BCU_IRNCR 	(0x00FC + DANUBE_BCU_BASE_ADDR)
+
+
+/***********************************************************************/
+/*  Module      :  MBC register address and bits                       */
+/***********************************************************************/
+
+#define DANUBE_MBC                          (0xBF103000)
+/***********************************************************************/
+
+
+/***Mailbox CPU Configuration Register***/
+#define DANUBE_MBC_MBC_CFG                      ((volatile u32*)(DANUBE_MBC+ 0x0080))
+#define DANUBE_MBC_MBC_CFG_SWAP (value)               (((( 1 << 2) - 1) & (value)) << 6)
+#define DANUBE_MBC_MBC_CFG_RES                              (1 << 5)
+#define DANUBE_MBC_MBC_CFG_FWID (value)               (((( 1 << 4) - 1) & (value)) << 1)
+#define DANUBE_MBC_MBC_CFG_SIZE                            (1 << 0)
+
+/***Mailbox CPU Interrupt Status Register***/
+#define DANUBE_MBC_MBC_ISR                      ((volatile u32*)(DANUBE_MBC+ 0x0084))
+#define DANUBE_MBC_MBC_ISR_B3DA                            (1 << 31)
+#define DANUBE_MBC_MBC_ISR_B2DA                            (1 << 30)
+#define DANUBE_MBC_MBC_ISR_B1E                              (1 << 29)
+#define DANUBE_MBC_MBC_ISR_B0E                              (1 << 28)
+#define DANUBE_MBC_MBC_ISR_WDT                              (1 << 27)
+#define DANUBE_MBC_MBC_ISR_DS260 (value)             (((( 1 << 27) - 1) & (value)) << 0)
+
+/***Mailbox CPU Mask Register***/
+#define DANUBE_MBC_MBC_MSK                      ((volatile u32*)(DANUBE_MBC+ 0x0088))
+#define DANUBE_MBC_MBC_MSK_B3DA                            (1 << 31)
+#define DANUBE_MBC_MBC_MSK_B2DA                            (1 << 30)
+#define DANUBE_MBC_MBC_MSK_B1E                              (1 << 29)
+#define DANUBE_MBC_MBC_MSK_B0E                              (1 << 28)
+#define DANUBE_MBC_MBC_MSK_WDT                              (1 << 27)
+#define DANUBE_MBC_MBC_MSK_DS260 (value)             (((( 1 << 27) - 1) & (value)) << 0)
+
+/***Mailbox CPU Mask 01 Register***/
+#define DANUBE_MBC_MBC_MSK01                    ((volatile u32*)(DANUBE_MBC+ 0x008C))
+#define DANUBE_MBC_MBC_MSK01_B3DA                            (1 << 31)
+#define DANUBE_MBC_MBC_MSK01_B2DA                            (1 << 30)
+#define DANUBE_MBC_MBC_MSK01_B1E                              (1 << 29)
+#define DANUBE_MBC_MBC_MSK01_B0E                              (1 << 28)
+#define DANUBE_MBC_MBC_MSK01_WDT                              (1 << 27)
+#define DANUBE_MBC_MBC_MSK01_DS260 (value)             (((( 1 << 27) - 1) & (value)) << 0)
+
+/***Mailbox CPU Mask 10 Register***/
+#define DANUBE_MBC_MBC_MSK10                    ((volatile u32*)(DANUBE_MBC+ 0x0090))
+#define DANUBE_MBC_MBC_MSK10_B3DA                            (1 << 31)
+#define DANUBE_MBC_MBC_MSK10_B2DA                            (1 << 30)
+#define DANUBE_MBC_MBC_MSK10_B1E                              (1 << 29)
+#define DANUBE_MBC_MBC_MSK10_B0E                              (1 << 28)
+#define DANUBE_MBC_MBC_MSK10_WDT                              (1 << 27)
+#define DANUBE_MBC_MBC_MSK10_DS260 (value)             (((( 1 << 27) - 1) & (value)) << 0)
+
+/***Mailbox CPU Short Command Register***/
+#define DANUBE_MBC_MBC_CMD                      ((volatile u32*)(DANUBE_MBC+ 0x0094))
+#define DANUBE_MBC_MBC_CMD_CS270 (value)             (((( 1 << 28) - 1) & (value)) << 0)
+
+/***Mailbox CPU Input Data of Buffer 0***/
+#define DANUBE_MBC_MBC_ID0                      ((volatile u32*)(DANUBE_MBC+ 0x0000))
+#define DANUBE_MBC_MBC_ID0_INDATA
+
+/***Mailbox CPU Input Data of Buffer 1***/
+#define DANUBE_MBC_MBC_ID1                      ((volatile u32*)(DANUBE_MBC+ 0x0020))
+#define DANUBE_MBC_MBC_ID1_INDATA
+
+/***Mailbox CPU Output Data of Buffer 2***/
+#define DANUBE_MBC_MBC_OD2                      ((volatile u32*)(DANUBE_MBC+ 0x0040))
+#define DANUBE_MBC_MBC_OD2_OUTDATA
+
+/***Mailbox CPU Output Data of Buffer 3***/
+#define DANUBE_MBC_MBC_OD3                      ((volatile u32*)(DANUBE_MBC+ 0x0060))
+#define DANUBE_MBC_MBC_OD3_OUTDATA
+
+/***Mailbox CPU Control Register of Buffer 0***/
+#define DANUBE_MBC_MBC_CR0                      ((volatile u32*)(DANUBE_MBC+ 0x0004))
+#define DANUBE_MBC_MBC_CR0_RDYABTFLS (value)          (((( 1 << 3) - 1) & (value)) << 0)
+
+/***Mailbox CPU Control Register of Buffer 1***/
+#define DANUBE_MBC_MBC_CR1                      ((volatile u32*)(DANUBE_MBC+ 0x0024))
+#define DANUBE_MBC_MBC_CR1_RDYABTFLS (value)          (((( 1 << 3) - 1) & (value)) << 0)
+
+/***Mailbox CPU Control Register of Buffer 2***/
+#define DANUBE_MBC_MBC_CR2                      ((volatile u32*)(DANUBE_MBC+ 0x0044))
+#define DANUBE_MBC_MBC_CR2_RDYABTFLS (value)          (((( 1 << 3) - 1) & (value)) << 0)
+
+/***Mailbox CPU Control Register of Buffer 3***/
+#define DANUBE_MBC_MBC_CR3                      ((volatile u32*)(DANUBE_MBC+ 0x0064))
+#define DANUBE_MBC_MBC_CR3_RDYABTFLS (value)          (((( 1 << 3) - 1) & (value)) << 0)
+
+/***Mailbox CPU Free Space of Buffer 0***/
+#define DANUBE_MBC_MBC_FS0                      ((volatile u32*)(DANUBE_MBC+ 0x0008))
+#define DANUBE_MBC_MBC_FS0_FS
+
+/***Mailbox CPU Free Space of Buffer 1***/
+#define DANUBE_MBC_MBC_FS1                      ((volatile u32*)(DANUBE_MBC+ 0x0028))
+#define DANUBE_MBC_MBC_FS1_FS
+
+/***Mailbox CPU Free Space of Buffer 2***/
+#define DANUBE_MBC_MBC_FS2                      ((volatile u32*)(DANUBE_MBC+ 0x0048))
+#define DANUBE_MBC_MBC_FS2_FS
+
+/***Mailbox CPU Free Space of Buffer 3***/
+#define DANUBE_MBC_MBC_FS3                      ((volatile u32*)(DANUBE_MBC+ 0x0068))
+#define DANUBE_MBC_MBC_FS3_FS
+
+/***Mailbox CPU Data Available in Buffer 0***/
+#define DANUBE_MBC_MBC_DA0                      ((volatile u32*)(DANUBE_MBC+ 0x000C))
+#define DANUBE_MBC_MBC_DA0_DA
+
+/***Mailbox CPU Data Available in Buffer 1***/
+#define DANUBE_MBC_MBC_DA1                      ((volatile u32*)(DANUBE_MBC+ 0x002C))
+#define DANUBE_MBC_MBC_DA1_DA
+
+/***Mailbox CPU Data Available in Buffer 2***/
+#define DANUBE_MBC_MBC_DA2                      ((volatile u32*)(DANUBE_MBC+ 0x004C))
+#define DANUBE_MBC_MBC_DA2_DA
+
+/***Mailbox CPU Data Available in Buffer 3***/
+#define DANUBE_MBC_MBC_DA3                      ((volatile u32*)(DANUBE_MBC+ 0x006C))
+#define DANUBE_MBC_MBC_DA3_DA
+
+/***Mailbox CPU Input Absolute Pointer of Buffer 0***/
+#define DANUBE_MBC_MBC_IABS0                    ((volatile u32*)(DANUBE_MBC+ 0x0010))
+#define DANUBE_MBC_MBC_IABS0_IABS
+
+/***Mailbox CPU Input Absolute Pointer of Buffer 1***/
+#define DANUBE_MBC_MBC_IABS1                    ((volatile u32*)(DANUBE_MBC+ 0x0030))
+#define DANUBE_MBC_MBC_IABS1_IABS
+
+/***Mailbox CPU Input Absolute Pointer of Buffer 2***/
+#define DANUBE_MBC_MBC_IABS2                    ((volatile u32*)(DANUBE_MBC+ 0x0050))
+#define DANUBE_MBC_MBC_IABS2_IABS
+
+/***Mailbox CPU Input Absolute Pointer of Buffer 3***/
+#define DANUBE_MBC_MBC_IABS3                    ((volatile u32*)(DANUBE_MBC+ 0x0070))
+#define DANUBE_MBC_MBC_IABS3_IABS
+
+/***Mailbox CPU Input Temporary Pointer of Buffer 0***/
+#define DANUBE_MBC_MBC_ITMP0                    ((volatile u32*)(DANUBE_MBC+ 0x0014))
+#define DANUBE_MBC_MBC_ITMP0_ITMP
+
+/***Mailbox CPU Input Temporary Pointer of Buffer 1***/
+#define DANUBE_MBC_MBC_ITMP1                    ((volatile u32*)(DANUBE_MBC+ 0x0034))
+#define DANUBE_MBC_MBC_ITMP1_ITMP
+
+/***Mailbox CPU Input Temporary Pointer of Buffer 2***/
+#define DANUBE_MBC_MBC_ITMP2                    ((volatile u32*)(DANUBE_MBC+ 0x0054))
+#define DANUBE_MBC_MBC_ITMP2_ITMP
+
+/***Mailbox CPU Input Temporary Pointer of Buffer 3***/
+#define DANUBE_MBC_MBC_ITMP3                    ((volatile u32*)(DANUBE_MBC+ 0x0074))
+#define DANUBE_MBC_MBC_ITMP3_ITMP
+
+/***Mailbox CPU Output Absolute Pointer of Buffer 0***/
+#define DANUBE_MBC_MBC_OABS0                    ((volatile u32*)(DANUBE_MBC+ 0x0018))
+#define DANUBE_MBC_MBC_OABS0_OABS
+
+/***Mailbox CPU Output Absolute Pointer of Buffer 1***/
+#define DANUBE_MBC_MBC_OABS1                    ((volatile u32*)(DANUBE_MBC+ 0x0038))
+#define DANUBE_MBC_MBC_OABS1_OABS
+
+/***Mailbox CPU Output Absolute Pointer of Buffer 2***/
+#define DANUBE_MBC_MBC_OABS2                    ((volatile u32*)(DANUBE_MBC+ 0x0058))
+#define DANUBE_MBC_MBC_OABS2_OABS
+
+/***Mailbox CPU Output Absolute Pointer of Buffer 3***/
+#define DANUBE_MBC_MBC_OABS3                    ((volatile u32*)(DANUBE_MBC+ 0x0078))
+#define DANUBE_MBC_MBC_OABS3_OABS
+
+/***Mailbox CPU Output Temporary Pointer of Buffer 0***/
+#define DANUBE_MBC_MBC_OTMP0                    ((volatile u32*)(DANUBE_MBC+ 0x001C))
+#define DANUBE_MBC_MBC_OTMP0_OTMP
+
+/***Mailbox CPU Output Temporary Pointer of Buffer 1***/
+#define DANUBE_MBC_MBC_OTMP1                    ((volatile u32*)(DANUBE_MBC+ 0x003C))
+#define DANUBE_MBC_MBC_OTMP1_OTMP
+
+/***Mailbox CPU Output Temporary Pointer of Buffer 2***/
+#define DANUBE_MBC_MBC_OTMP2                    ((volatile u32*)(DANUBE_MBC+ 0x005C))
+#define DANUBE_MBC_MBC_OTMP2_OTMP
+
+/***Mailbox CPU Output Temporary Pointer of Buffer 3***/
+#define DANUBE_MBC_MBC_OTMP3                    ((volatile u32*)(DANUBE_MBC+ 0x007C))
+#define DANUBE_MBC_MBC_OTMP3_OTMP
+
+/***DSP Control Register***/
+#define DANUBE_MBC_DCTRL                        ((volatile u32*)(DANUBE_MBC+ 0x00A0))
+#define DANUBE_MBC_DCTRL_BA                              (1 << 0)
+#define DANUBE_MBC_DCTRL_BMOD (value)               (((( 1 << 3) - 1) & (value)) << 1)
+#define DANUBE_MBC_DCTRL_IDL                              (1 << 4)
+#define DANUBE_MBC_DCTRL_RES                              (1 << 15)
+
+/***DSP Status Register***/
+#define DANUBE_MBC_DSTA                         ((volatile u32*)(DANUBE_MBC+ 0x00A4))
+#define DANUBE_MBC_DSTA_IDLE                            (1 << 0)
+#define DANUBE_MBC_DSTA_PD                              (1 << 1)
+
+/***DSP Test 1 Register***/
+#define DANUBE_MBC_DTST1                        ((volatile u32*)(DANUBE_MBC+ 0x00A8))
+#define DANUBE_MBC_DTST1_ABORT                          (1 << 0)
+#define DANUBE_MBC_DTST1_HWF32                          (1 << 1)
+#define DANUBE_MBC_DTST1_HWF4M                          (1 << 2)
+#define DANUBE_MBC_DTST1_HWFOP                          (1 << 3)
+
+
+/***********************************************************************/
+/*  Module      :  SSC1 register address and bits                      */
+/***********************************************************************/
+#define DANUBE_SSC1                       	(KSEG1+0x1e100800)
+/***********************************************************************/
+/***SSC Clock Control Register***/
+#define DANUBE_SSC_CLC                      	(0x0000)
+#define DANUBE_SSC_CLC_RMC(value)               (((( 1 << 8) - 1) & (value)) << 8)
+#define DANUBE_SSC_CLC_DISS                     (1 << 1)
+#define DANUBE_SSC_CLC_DISR                     (1 << 0)
+/***SSC Port Input Selection Register***/
+#define DANUBE_SSC_PISEL                        (0x0004)
+/***SSC Identification Register***/
+#define DANUBE_SSC_ID                           (0x0008)
+/***Control Register (Programming Mode)***/
+#define DANUBE_SSC_CON                  		(0x0010)
+#define DANUBE_SSC_CON_RUEN                            (1 << 12)
+#define DANUBE_SSC_CON_TUEN                              (1 << 11)
+#define DANUBE_SSC_CON_AEN                              (1 << 10)
+#define DANUBE_SSC_CON_REN                              (1 << 9)
+#define DANUBE_SSC_CON_TEN                              (1 << 8)
+#define DANUBE_SSC_CON_LB                              (1 << 7)
+#define DANUBE_SSC_CON_PO                              (1 << 6)
+#define DANUBE_SSC_CON_PH                              (1 << 5)
+#define DANUBE_SSC_CON_HB                              (1 << 4)
+#define DANUBE_SSC_CON_BM(value)                	(((( 1 << 5) - 1) & (value)) << 16)
+#define DANUBE_SSC_CON_RX_OFF                          (1 << 1)
+#define DANUBE_SSC_CON_TX_OFF                          (1 << 0)
+/***SCC Status Register***/
+#define DANUBE_SSC_STATE                  (0x0014)
+#define DANUBE_SSC_STATE_EN                              (1 << 0)
+#define DANUBE_SSC_STATE_MS                              (1 << 1)
+#define DANUBE_SSC_STATE_BSY                              (1 << 13)
+#define DANUBE_SSC_STATE_RUE                              (1 << 12)
+#define DANUBE_SSC_STATE_TUE                              (1 << 11)
+#define DANUBE_SSC_STATE_AE                              (1 << 10)
+#define DANUBE_SSC_STATE_RE                              (1 << 9)
+#define DANUBE_SSC_STATE_TE                              (1 << 8)
+#define DANUBE_SSC_STATE_BC(value)                (((( 1 << 5) - 1) & (value)) << 16)
+/***SSC Write Hardware Modified Control Register***/
+#define DANUBE_SSC_WHBSTATE                   ( 0x0018)
+#define DANUBE_SSC_WHBSTATE_SETBE                          (1 << 15)
+#define DANUBE_SSC_WHBSTATE_SETPE                          (1 << 14)
+#define DANUBE_SSC_WHBSTATE_SETRE                          (1 << 13)
+#define DANUBE_SSC_WHBSTATE_SETTE                          (1 << 12)
+#define DANUBE_SSC_WHBSTATE_CLRBE                          (1 << 11)
+#define DANUBE_SSC_WHBSTATE_CLRPE                          (1 << 10)
+#define DANUBE_SSC_WHBSTATE_CLRRE                          (1 << 9)
+#define DANUBE_SSC_WHBSTATE_CLRTE                          (1 << 8)
+/***SSC Transmitter Buffer Register***/
+#define DANUBE_SSC_TB                       (0x0020)
+#define DANUBE_SSC_TB_TB_VALUE(value)          (((( 1 << 16) - 1) & (value)) << 0)
+/***SSC Receiver Buffer Register***/
+#define DANUBE_SSC_RB                       (0x0024)
+#define DANUBE_SSC_RB_RB_VALUE(value)          (((( 1 << 16) - 1) & (value)) << 0)
+/***SSC Receive FIFO Control Register***/
+#define DANUBE_SSC_RXFCON                   (0x0030)
+#define DANUBE_SSC_RXFCON_RXFITL(value)             (((( 1 << 6) - 1) & (value)) << 8)
+#define DANUBE_SSC_RXFCON_RXTMEN                        (1 << 2)
+#define DANUBE_SSC_RXFCON_RXFLU                          (1 << 1)
+#define DANUBE_SSC_RXFCON_RXFEN                          (1 << 0)
+/***SSC Transmit FIFO Control Register***/
+#define DANUBE_SSC_TXFCON                   ( 0x0034)
+#define DANUBE_SSC_TXFCON_RXFITL(value)             (((( 1 << 6) - 1) & (value)) << 8)
+#define DANUBE_SSC_TXFCON_TXTMEN                        (1 << 2)
+#define DANUBE_SSC_TXFCON_TXFLU                          (1 << 1)
+#define DANUBE_SSC_TXFCON_TXFEN                          (1 << 0)
+/***SSC FIFO Status Register***/
+#define DANUBE_SSC_FSTAT                    (0x0038)
+#define DANUBE_SSC_FSTAT_TXFFL(value)              (((( 1 << 6) - 1) & (value)) << 8)
+#define DANUBE_SSC_FSTAT_RXFFL(value)              (((( 1 << 6) - 1) & (value)) << 0)
+/***SSC Baudrate Timer Reload Register***/
+#define DANUBE_SSC_BR                       (0x0040)
+#define DANUBE_SSC_BR_BR_VALUE(value)          (((( 1 << 16) - 1) & (value)) << 0)
+#define DANUBE_SSC_BRSTAT                       (0x0044)
+#define DANUBE_SSC_SFCON                        (0x0060)
+#define DANUBE_SSC_SFSTAT                       (0x0064)
+#define DANUBE_SSC_GPOCON                       (0x0070)
+#define DANUBE_SSC_GPOSTAT                      (0x0074)
+#define DANUBE_SSC_WHBGPOSTAT                   (0x0078)
+#define DANUBE_SSC_RXREQ                        (0x0080)
+#define DANUBE_SSC_RXCNT                        (0x0084)
+/*DMA Registers in Bus Clock Domain*/
+#define DANUBE_SSC_DMA_CON                      (0x00EC)
+/*interrupt Node Registers in Bus Clock Domain*/
+#define DANUBE_SSC_IRNEN                        (0x00F4)
+#define DANUBE_SSC_IRNCR                        (0x00F8)
+#define DANUBE_SSC_IRNICR                       (0x00FC)
+#define DANUBE_SSC_IRN_FIR			0x8
+#define DANUBE_SSC_IRN_EIR			0x4
+#define DANUBE_SSC_IRN_RIR			0x2
+#define DANUBE_SSC_IRN_TIR			0x1
+
+
+#define	DANUBE_SSC1_CLC			((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_CLC))
+#define	DANUBE_SSC1_ID			((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_ID))
+#define	DANUBE_SSC1_CON			((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_CON))
+#define	DANUBE_SSC1_STATE			((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_STATE))
+#define	DANUBE_SSC1_WHBSTATE			((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_WHBSTATE))
+#define	DANUBE_SSC1_TB			((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_TB))
+#define	DANUBE_SSC1_RB			((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_RB))
+#define	DANUBE_SSC1_FSTAT			((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_FSTAT))
+#define	DANUBE_SSC1_PISEL			((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_PISEL))
+#define	DANUBE_SSC1_RXFCON			((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_RXFCON))
+#define	DANUBE_SSC1_TXFCON			((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_TXFCON))
+#define	DANUBE_SSC1_BR			((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_BR))
+#define	DANUBE_SSC1_BRSTAT			((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_BRSTAT))
+#define	DANUBE_SSC1_SFCON			((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_SFCON))
+#define	DANUBE_SSC1_SFSTAT			((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_SFSTAT))
+#define	DANUBE_SSC1_GPOCON			((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_GPOCON))
+#define	DANUBE_SSC1_GPOSTAT			((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_GPOSTAT))
+#define	DANUBE_SSC1_WHBGPOSTAT			((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_WHBGPOSTAT))
+#define	DANUBE_SSC1_RXREQ			((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_RXREQ))
+#define	DANUBE_SSC1_RXCNT			((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_RXCNT))
+#define	DANUBE_SSC1_DMA_CON			((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_DMA_CON))
+#define	DANUBE_SSC1_IRNEN			((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_IRNEN))
+#define	DANUBE_SSC1_IRNICR			((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_IRNICR))
+#define	DANUBE_SSC1_IRNCR			((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_IRNCR))
+
+/***********************************************************************/
+/*  Module      :  GPIO register address and bits                       */
+/***********************************************************************/
+#define DANUBE_GPIO                     (0xBE100B00)
+/***Port 0 Data Output Register (0010H)***/
+#define DANUBE_GPIO_P0_OUT              ((volatile u32 *)(DANUBE_GPIO+ 0x0010))
+/***Port 1 Data Output Register (0040H)***/
+#define DANUBE_GPIO_P1_OUT              ((volatile u32 *)(DANUBE_GPIO+ 0x0040))
+/***Port 0 Data Input Register (0014H)***/
+#define DANUBE_GPIO_P0_IN               ((volatile u32 *)(DANUBE_GPIO+ 0x0014))
+/***Port 1 Data Input Register (0044H)***/
+#define DANUBE_GPIO_P1_IN               ((volatile u32 *)(DANUBE_GPIO+ 0x0044))
+/***Port 0 Direction Register (0018H)***/
+#define DANUBE_GPIO_P0_DIR              ((volatile u32 *)(DANUBE_GPIO+ 0x0018))
+/***Port 1 Direction Register (0048H)***/
+#define DANUBE_GPIO_P1_DIR              ((volatile u32 *)(DANUBE_GPIO+ 0x0048))
+/***Port 0 Alternate Function Select Register 0 (001C H) ***/
+#define DANUBE_GPIO_P0_ALTSEL0          ((volatile u32 *)(DANUBE_GPIO+ 0x001C))
+/***Port 1 Alternate Function Select Register 0 (004C H) ***/
+#define DANUBE_GPIO_P1_ALTSEL0          ((volatile u32 *)(DANUBE_GPIO+ 0x004C))
+/***Port 0 Alternate Function Select Register 1 (0020 H) ***/
+#define DANUBE_GPIO_P0_ALTSEL1          ((volatile u32 *)(DANUBE_GPIO+ 0x0020))
+/***Port 1 Alternate Function Select Register 0 (0050 H) ***/
+#define DANUBE_GPIO_P1_ALTSEL1          ((volatile u32 *)(DANUBE_GPIO+ 0x0050))
+/***Port 0 Open Drain Control Register (0024H)***/
+#define DANUBE_GPIO_P0_OD               ((volatile u32 *)(DANUBE_GPIO+ 0x0024))
+/***Port 1 Open Drain Control Register (0054H)***/
+#define DANUBE_GPIO_P1_OD               ((volatile u32 *)(DANUBE_GPIO+ 0x0054))
+/***Port 0 Input Schmitt-Trigger Off Register (0028 H) ***/
+#define DANUBE_GPIO_P0_STOFF            ((volatile u32 *)(DANUBE_GPIO+ 0x0028))
+/***Port 1 Input Schmitt-Trigger Off Register (0058 H) ***/
+#define DANUBE_GPIO_P1_STOFF            ((volatile u32 *)(DANUBE_GPIO+ 0x0058))
+/***Port 0 Pull Up/Pull Down Select Register (002C H)***/
+#define DANUBE_GPIO_P0_PUDSEL           ((volatile u32 *)(DANUBE_GPIO+ 0x002C))
+/***Port 1 Pull Up/Pull Down Select Register (005C H)***/
+#define DANUBE_GPIO_P1_PUDSEL           ((volatile u32 *)(DANUBE_GPIO+ 0x005C))
+/***Port 0 Pull Up Device Enable Register (0030 H)***/
+#define DANUBE_GPIO_P0_PUDEN            ((volatile u32 *)(DANUBE_GPIO+ 0x0030))
+/***Port 1 Pull Up Device Enable Register (0060 H)***/
+#define DANUBE_GPIO_P1_PUDEN            ((volatile u32 *)(DANUBE_GPIO+ 0x0060))
+/***********************************************************************/
+/*  Module      :  CGU register address and bits                       */
+/***********************************************************************/
+
+#define DANUBE_CGU                          (0xBF103000)
+/***********************************************************************/
+
+/***CGU Clock PLL0 ***/
+#define DANUBE_CGU_PLL0_CFG                	((volatile u32*)(DANUBE_CGU+ 0x0004))
+/***CGU Clock PLL1 ***/
+#define DANUBE_CGU_PLL1_CFG                	((volatile u32*)(DANUBE_CGU+ 0x0008))
+/***CGU Clock SYS Mux Register***/
+#define DANUBE_CGU_SYS                   	((volatile u32*)(DANUBE_CGU+ 0x0010))
+/***CGU Interface Clock Control Register***/
+#define DANUBE_CGU_IFCCR                        ((volatile u32*)(DANUBE_CGU+ 0x0018))
+/***CGU PCI Clock Control Register**/
+#define DANUBE_CGU_PCICR                          ((volatile u32*)(DANUBE_CGU+ 0x0034))
+
+
+/***********************************************************************/
+/*  Module      :  PCI register address and bits                       */
+/***********************************************************************/
+#define PCI_CR_PR_OFFSET  0xBE105400
+#define PCI_CR_CLK_CTRL_REG         (PCI_CR_PR_OFFSET + 0x0000)
+
+#define PCI_CR_PCI_ID_REG           (PCI_CR_PR_OFFSET + 0x0004)
+#define PCI_CR_SFT_RST_REG          (PCI_CR_PR_OFFSET + 0x0010)
+#define PCI_CR_PCI_FPI_ERR_ADDR_REG (PCI_CR_PR_OFFSET + 0x0014)
+#define PCI_CR_FCI_PCI_ERR_ADDR_REG (PCI_CR_PR_OFFSET + 0x0018)
+#define PCI_CR_FPI_ERR_TAG_REG      (PCI_CR_PR_OFFSET + 0x001C)
+#define PCI_CR_PCI_IRR_REG          (PCI_CR_PR_OFFSET + 0x0020)
+#define PCI_CR_PCI_IRA_REG          (PCI_CR_PR_OFFSET + 0x0024)
+#define PCI_CR_PCI_IRM_REG          (PCI_CR_PR_OFFSET + 0x0028)
+#define PCI_CR_PCI_EOI_REG          (PCI_CR_PR_OFFSET + 0x002C)
+#define PCI_CR_PCI_MOD_REG          (PCI_CR_PR_OFFSET + 0x0030)
+#define PCI_CR_DV_ID_REG            (PCI_CR_PR_OFFSET + 0x0034)
+#define PCI_CR_SUBSYS_ID_REG        (PCI_CR_PR_OFFSET + 0x0038)
+#define PCI_CR_PCI_PM_REG           (PCI_CR_PR_OFFSET + 0x003C)
+#define PCI_CR_CLASS_CODE1_REG      (PCI_CR_PR_OFFSET + 0x0040)
+#define PCI_CR_BAR11MASK_REG        (PCI_CR_PR_OFFSET + 0x0044)
+#define PCI_CR_BAR12MASK_REG        (PCI_CR_PR_OFFSET + 0x0048)
+#define PCI_CR_BAR13MASK_REG        (PCI_CR_PR_OFFSET + 0x004C)
+#define PCI_CR_BAR14MASK_REG        (PCI_CR_PR_OFFSET + 0x0050)
+#define PCI_CR_BAR15MASK_REG        (PCI_CR_PR_OFFSET + 0x0054)
+#define PCI_CR_BAR16MASK_REG        (PCI_CR_PR_OFFSET + 0x0058)
+#define PCI_CR_CIS_PT1_REG          (PCI_CR_PR_OFFSET + 0x005C)
+#define PCI_CR_SUBSYS_ID1_REG       (PCI_CR_PR_OFFSET + 0x0060)
+#define PCI_CR_PCI_ADDR_MAP11_REG   (PCI_CR_PR_OFFSET + 0x0064)
+#define PCI_CR_PCI_ADDR_MAP12_REG   (PCI_CR_PR_OFFSET + 0x0068)
+#define PCI_CR_PCI_ADDR_MAP13_REG   (PCI_CR_PR_OFFSET + 0x006C)
+#define PCI_CR_PCI_ADDR_MAP14_REG   (PCI_CR_PR_OFFSET + 0x0070)
+#define PCI_CR_PCI_ADDR_MAP15_REG   (PCI_CR_PR_OFFSET + 0x0074)
+#define PCI_CR_PCI_ADDR_MAP16_REG   (PCI_CR_PR_OFFSET + 0x0078)
+#define PCI_CR_FPI_SEG_EN_REG       (PCI_CR_PR_OFFSET + 0x007C)
+#define PCI_CR_PC_ARB_REG           (PCI_CR_PR_OFFSET + 0x0080)
+#define PCI_CR_BAR21MASK_REG        (PCI_CR_PR_OFFSET + 0x0084)
+#define PCI_CR_BAR22MASK_REG        (PCI_CR_PR_OFFSET + 0x0088)
+#define PCI_CR_BAR23MASK_REG        (PCI_CR_PR_OFFSET + 0x008C)
+#define PCI_CR_BAR24MASK_REG        (PCI_CR_PR_OFFSET + 0x0090)
+#define PCI_CR_BAR25MASK_REG        (PCI_CR_PR_OFFSET + 0x0094)
+#define PCI_CR_BAR26MASK_REG        (PCI_CR_PR_OFFSET + 0x0098)
+#define PCI_CR_CIS_PT2_REG          (PCI_CR_PR_OFFSET + 0x009C)
+#define PCI_CR_SUBSYS_ID2_REG       (PCI_CR_PR_OFFSET + 0x00A0)
+#define PCI_CR_PCI_ADDR_MAP21_REG   (PCI_CR_PR_OFFSET + 0x00A4)
+#define PCI_CR_PCI_ADDR_MAP22_REG   (PCI_CR_PR_OFFSET + 0x00A8)
+#define PCI_CR_PCI_ADDR_MAP23_REG   (PCI_CR_PR_OFFSET + 0x00AC)
+
+
+/***********************************************************************/
+/*  Module      :  MCD register address and bits                       */
+/***********************************************************************/
+#define DANUBE_MCD                          		(KSEG1+0x1F106000)
+
+/***Manufacturer Identification Register***/
+#define DANUBE_MCD_MANID                        	((volatile u32*)(DANUBE_MCD+ 0x0024))
+#define DANUBE_MCD_MANID_MANUF(value)              	(((( 1 << 11) - 1) & (value)) << 5)
+
+/***Chip Identification Register***/
+#define DANUBE_MCD_CHIPID                       	((volatile u32*)(DANUBE_MCD+ 0x0028))
+#define DANUBE_MCD_CHIPID_VERSION_GET(value)             (((value) >> 28) & ((1 << 4) - 1))
+#define DANUBE_MCD_CHIPID_VERSION_SET(value)             (((( 1 << 4) - 1) & (value)) << 28)
+#define DANUBE_MCD_CHIPID_PART_NUMBER_GET(value)         (((value) >> 12) & ((1 << 16) - 1))
+#define DANUBE_MCD_CHIPID_PART_NUMBER_SET(value)         (((( 1 << 16) - 1) & (value)) << 12)
+#define DANUBE_MCD_CHIPID_MANID_GET(value)               (((value) >> 1) & ((1 << 11) - 1))
+#define DANUBE_MCD_CHIPID_MANID_SET(value)               (((( 1 << 11) - 1) & (value)) << 1)
+
+#define DANUBE_CHIPID_STANDARD				0x00EB
+#define DANUBE_CHIPID_YANGTSE				0x00ED
+
+/***Redesign Tracing Identification Register***/
+#define DANUBE_MCD_RTID                         	((volatile u32*)(DANUBE_MCD+ 0x002C))
+#define DANUBE_MCD_RTID_LC                              (1 << 15)
+#define DANUBE_MCD_RTID_RIX(value)                	(((( 1 << 3) - 1) & (value)) << 0)
+
+
+/***********************************************************************/
+/*  Module      :  EBU register address and bits                       */
+/***********************************************************************/
+
+#define DANUBE_EBU                          (0xBE105300)
+#define EBU_NAND_CON       (volatile u32*)(DANUBE_EBU + 0xB0)
+#define EBU_NAND_WAIT      (volatile u32*)(DANUBE_EBU + 0xB4)
+#define EBU_NAND_ECC0      (volatile u32*)(DANUBE_EBU + 0xB8)
+#define EBU_NAND_ECC_AC    (volatile u32*)(DANUBE_EBU + 0xBC)
+
+/***********************************************************************/
+
+
+/***EBU Clock Control Register***/
+#define DANUBE_EBU_CLC                      ((volatile u32*)(DANUBE_EBU+ 0x0000))
+#define DANUBE_EBU_CLC_DISS                            (1 << 1)
+#define DANUBE_EBU_CLC_DISR                            (1 << 0)
+
+/***EBU Global Control Register***/
+#define DANUBE_EBU_CON                      ((volatile u32*)(DANUBE_EBU+ 0x0010))
+#define DANUBE_EBU_CON_DTACS (value)              (((( 1 << 3) - 1) & (value)) << 20)
+#define DANUBE_EBU_CON_DTARW (value)              (((( 1 << 3) - 1) & (value)) << 16)
+#define DANUBE_EBU_CON_TOUTC (value)              (((( 1 << 8) - 1) & (value)) << 8)
+#define DANUBE_EBU_CON_ARBMODE (value)            (((( 1 << 2) - 1) & (value)) << 6)
+#define DANUBE_EBU_CON_ARBSYNC                      (1 << 5)
+#define DANUBE_EBU_CON_1                              (1 << 3)
+
+/***EBU Address Select Register 0***/
+#define DANUBE_EBU_ADDSEL0                  ((volatile u32*)(DANUBE_EBU+ 0x0020))
+#define DANUBE_EBU_ADDSEL0_BASE (value)               (((( 1 << 20) - 1) & (value)) << 12)
+#define DANUBE_EBU_ADDSEL0_MASK (value)               (((( 1 << 4) - 1) & (value)) << 4)
+#define DANUBE_EBU_ADDSEL0_MIRRORE                      (1 << 1)
+#define DANUBE_EBU_ADDSEL0_REGEN                          (1 << 0)
+
+/***EBU Address Select Register 1***/
+#define DANUBE_EBU_ADDSEL1                  ((volatile u32*)(DANUBE_EBU+ 0x0024))
+#define DANUBE_EBU_ADDSEL1_BASE (value)               (((( 1 << 20) - 1) & (value)) << 12)
+#define DANUBE_EBU_ADDSEL1_MASK (value)               (((( 1 << 4) - 1) & (value)) << 4)
+#define DANUBE_EBU_ADDSEL1_MIRRORE                      (1 << 1)
+#define DANUBE_EBU_ADDSEL1_REGEN                          (1 << 0)
+
+/***EBU Address Select Register 2***/
+#define DANUBE_EBU_ADDSEL2                  ((volatile u32*)(DANUBE_EBU+ 0x0028))
+#define DANUBE_EBU_ADDSEL2_BASE (value)               (((( 1 << 20) - 1) & (value)) << 12)
+#define DANUBE_EBU_ADDSEL2_MASK (value)               (((( 1 << 4) - 1) & (value)) << 4)
+#define DANUBE_EBU_ADDSEL2_MIRRORE                      (1 << 1)
+#define DANUBE_EBU_ADDSEL2_REGEN                          (1 << 0)
+
+/***EBU Address Select Register 3***/
+#define DANUBE_EBU_ADDSEL3                  ((volatile u32*)(DANUBE_EBU+ 0x002C))
+#define DANUBE_EBU_ADDSEL3_BASE (value)               (((( 1 << 20) - 1) & (value)) << 12)
+#define DANUBE_EBU_ADDSEL3_MASK (value)               (((( 1 << 4) - 1) & (value)) << 4)
+#define DANUBE_EBU_ADDSEL3_MIRRORE                      (1 << 1)
+#define DANUBE_EBU_ADDSEL3_REGEN                          (1 << 0)
+
+/***EBU Bus Configuration Register 0***/
+#define DANUBE_EBU_BUSCON0                  ((volatile u32*)(DANUBE_EBU+ 0x0060))
+#define DANUBE_EBU_BUSCON0_WRDIS                          (1 << 31)
+#define DANUBE_EBU_BUSCON0_ALEC (value)               (((( 1 << 2) - 1) & (value)) << 29)
+#define DANUBE_EBU_BUSCON0_BCGEN (value)              (((( 1 << 2) - 1) & (value)) << 27)
+#define DANUBE_EBU_BUSCON0_AGEN (value)               (((( 1 << 2) - 1) & (value)) << 24)
+#define DANUBE_EBU_BUSCON0_CMULTR (value)             (((( 1 << 2) - 1) & (value)) << 22)
+#define DANUBE_EBU_BUSCON0_WAIT (value)               (((( 1 << 2) - 1) & (value)) << 20)
+#define DANUBE_EBU_BUSCON0_WAITINV                      (1 << 19)
+#define DANUBE_EBU_BUSCON0_SETUP                          (1 << 18)
+#define DANUBE_EBU_BUSCON0_PORTW (value)              (((( 1 << 2) - 1) & (value)) << 16)
+#define DANUBE_EBU_BUSCON0_WAITRDC (value)            (((( 1 << 7) - 1) & (value)) << 9)
+#define DANUBE_EBU_BUSCON0_WAITWRC (value)            (((( 1 << 3) - 1) & (value)) << 6)
+#define DANUBE_EBU_BUSCON0_HOLDC (value)              (((( 1 << 2) - 1) & (value)) << 4)
+#define DANUBE_EBU_BUSCON0_RECOVC (value)             (((( 1 << 2) - 1) & (value)) << 2)
+#define DANUBE_EBU_BUSCON0_CMULT (value)              (((( 1 << 2) - 1) & (value)) << 0)
+
+/***EBU Bus Configuration Register 1***/
+#define DANUBE_EBU_BUSCON1                  ((volatile u32*)(DANUBE_EBU+ 0x0064))
+#define DANUBE_EBU_BUSCON1_WRDIS                          (1 << 31)
+#define DANUBE_EBU_BUSCON1_ALEC (value)               (((( 1 << 2) - 1) & (value)) << 29)
+#define DANUBE_EBU_BUSCON1_BCGEN (value)              (((( 1 << 2) - 1) & (value)) << 27)
+#define DANUBE_EBU_BUSCON1_AGEN (value)               (((( 1 << 2) - 1) & (value)) << 24)
+#define DANUBE_EBU_BUSCON1_CMULTR (value)             (((( 1 << 2) - 1) & (value)) << 22)
+#define DANUBE_EBU_BUSCON1_WAIT (value)               (((( 1 << 2) - 1) & (value)) << 20)
+#define DANUBE_EBU_BUSCON1_WAITINV                      (1 << 19)
+#define DANUBE_EBU_BUSCON1_SETUP                          (1 << 18)
+#define DANUBE_EBU_BUSCON1_PORTW (value)              (((( 1 << 2) - 1) & (value)) << 16)
+#define DANUBE_EBU_BUSCON1_WAITRDC (value)            (((( 1 << 7) - 1) & (value)) << 9)
+#define DANUBE_EBU_BUSCON1_WAITWRC (value)            (((( 1 << 3) - 1) & (value)) << 6)
+#define DANUBE_EBU_BUSCON1_HOLDC (value)              (((( 1 << 2) - 1) & (value)) << 4)
+#define DANUBE_EBU_BUSCON1_RECOVC (value)             (((( 1 << 2) - 1) & (value)) << 2)
+#define DANUBE_EBU_BUSCON1_CMULT (value)              (((( 1 << 2) - 1) & (value)) << 0)
+
+/***EBU Bus Configuration Register 2***/
+#define DANUBE_EBU_BUSCON2                  ((volatile u32*)(DANUBE_EBU+ 0x0068))
+#define DANUBE_EBU_BUSCON2_WRDIS                          (1 << 31)
+#define DANUBE_EBU_BUSCON2_ALEC (value)               (((( 1 << 2) - 1) & (value)) << 29)
+#define DANUBE_EBU_BUSCON2_BCGEN (value)              (((( 1 << 2) - 1) & (value)) << 27)
+#define DANUBE_EBU_BUSCON2_AGEN (value)               (((( 1 << 2) - 1) & (value)) << 24)
+#define DANUBE_EBU_BUSCON2_CMULTR (value)             (((( 1 << 2) - 1) & (value)) << 22)
+#define DANUBE_EBU_BUSCON2_WAIT (value)               (((( 1 << 2) - 1) & (value)) << 20)
+#define DANUBE_EBU_BUSCON2_WAITINV                      (1 << 19)
+#define DANUBE_EBU_BUSCON2_SETUP                          (1 << 18)
+#define DANUBE_EBU_BUSCON2_PORTW (value)              (((( 1 << 2) - 1) & (value)) << 16)
+#define DANUBE_EBU_BUSCON2_WAITRDC (value)            (((( 1 << 7) - 1) & (value)) << 9)
+#define DANUBE_EBU_BUSCON2_WAITWRC (value)            (((( 1 << 3) - 1) & (value)) << 6)
+#define DANUBE_EBU_BUSCON2_HOLDC (value)              (((( 1 << 2) - 1) & (value)) << 4)
+#define DANUBE_EBU_BUSCON2_RECOVC (value)             (((( 1 << 2) - 1) & (value)) << 2)
+#define DANUBE_EBU_BUSCON2_CMULT (value)              (((( 1 << 2) - 1) & (value)) << 0)
+
+/***********************************************************************/
+/*  Module      :  SDRAM register address and bits                     */
+/***********************************************************************/
+
+#define DANUBE_SDRAM                        (0xBF800000)
+/***********************************************************************/
+
+
+/***MC Access Error Cause Register***/
+#define DANUBE_SDRAM_MC_ERRCAUSE                  ((volatile u32*)(DANUBE_SDRAM+ 0x0100))
+#define DANUBE_SDRAM_MC_ERRCAUSE_ERR                              (1 << 31)
+#define DANUBE_SDRAM_MC_ERRCAUSE_PORT (value)               (((( 1 << 4) - 1) & (value)) << 16)
+#define DANUBE_SDRAM_MC_ERRCAUSE_CAUSE (value)              (((( 1 << 2) - 1) & (value)) << 0)
+#define DANUBE_SDRAM_MC_ERRCAUSE_Res (value)                (((( 1 << NaN) - 1) & (value)) << NaN)
+
+/***MC Access Error Address Register***/
+#define DANUBE_SDRAM_MC_ERRADDR                   ((volatile u32*)(DANUBE_SDRAM+ 0x0108))
+#define DANUBE_SDRAM_MC_ERRADDR_ADDR
+
+/***MC I/O General Purpose Register***/
+#define DANUBE_SDRAM_MC_IOGP                      ((volatile u32*)(DANUBE_SDRAM+ 0x0800))
+#define DANUBE_SDRAM_MC_IOGP_GPR6 (value)               (((( 1 << 4) - 1) & (value)) << 28)
+#define DANUBE_SDRAM_MC_IOGP_GPR5 (value)               (((( 1 << 4) - 1) & (value)) << 24)
+#define DANUBE_SDRAM_MC_IOGP_GPR4 (value)               (((( 1 << 4) - 1) & (value)) << 20)
+#define DANUBE_SDRAM_MC_IOGP_GPR3 (value)               (((( 1 << 4) - 1) & (value)) << 16)
+#define DANUBE_SDRAM_MC_IOGP_GPR2 (value)               (((( 1 << 4) - 1) & (value)) << 12)
+#define DANUBE_SDRAM_MC_IOGP_CPS                              (1 << 11)
+#define DANUBE_SDRAM_MC_IOGP_CLKDELAY (value)          (((( 1 << 3) - 1) & (value)) << 8)
+#define DANUBE_SDRAM_MC_IOGP_CLKRAT (value)             (((( 1 << 4) - 1) & (value)) << 4)
+#define DANUBE_SDRAM_MC_IOGP_RDDEL (value)              (((( 1 << 4) - 1) & (value)) << 0)
+
+/***MC Self Refresh Register***/
+#define DANUBE_SDRAM_MC_SELFRFSH                  ((volatile u32*)(DANUBE_SDRAM+ 0x0A00))
+#define DANUBE_SDRAM_MC_SELFRFSH_PWDS                            (1 << 1)
+#define DANUBE_SDRAM_MC_SELFRFSH_PWD                              (1 << 0)
+#define DANUBE_SDRAM_MC_SELFRFSH_Res (value)                (((( 1 << 30) - 1) & (value)) << 2)
+
+/***MC Enable Register***/
+#define DANUBE_SDRAM_MC_CTRLENA                   ((volatile u32*)(DANUBE_SDRAM+ 0x1000))
+#define DANUBE_SDRAM_MC_CTRLENA_ENA                              (1 << 0)
+#define DANUBE_SDRAM_MC_CTRLENA_Res (value)                (((( 1 << 31) - 1) & (value)) << 1)
+
+/***MC Mode Register Setup Code***/
+#define DANUBE_SDRAM_MC_MRSCODE                   ((volatile u32*)(DANUBE_SDRAM+ 0x1008))
+#define DANUBE_SDRAM_MC_MRSCODE_UMC (value)                (((( 1 << 5) - 1) & (value)) << 7)
+#define DANUBE_SDRAM_MC_MRSCODE_CL (value)                (((( 1 << 3) - 1) & (value)) << 4)
+#define DANUBE_SDRAM_MC_MRSCODE_WT                              (1 << 3)
+#define DANUBE_SDRAM_MC_MRSCODE_BL (value)                (((( 1 << 3) - 1) & (value)) << 0)
+
+/***MC Configuration Data-word Width Register***/
+#define DANUBE_SDRAM_MC_CFGDW                    ((volatile u32*)(DANUBE_SDRAM+ 0x1010))
+#define DANUBE_SDRAM_MC_CFGDW_DW (value)                (((( 1 << 4) - 1) & (value)) << 0)
+#define DANUBE_SDRAM_MC_CFGDW_Res (value)                (((( 1 << 28) - 1) & (value)) << 4)
+
+/***MC Configuration Physical Bank 0 Register***/
+#define DANUBE_SDRAM_MC_CFGPB0                    ((volatile u32*)(DANUBE_SDRAM+ 0x1018))
+#define DANUBE_SDRAM_MC_CFGPB0_MCSEN0 (value)             (((( 1 << 4) - 1) & (value)) << 12)
+#define DANUBE_SDRAM_MC_CFGPB0_BANKN0 (value)             (((( 1 << 4) - 1) & (value)) << 8)
+#define DANUBE_SDRAM_MC_CFGPB0_ROWW0 (value)              (((( 1 << 4) - 1) & (value)) << 4)
+#define DANUBE_SDRAM_MC_CFGPB0_COLW0 (value)              (((( 1 << 4) - 1) & (value)) << 0)
+#define DANUBE_SDRAM_MC_CFGPB0_Res (value)                (((( 1 << 16) - 1) & (value)) << 16)
+
+/***MC Latency Register***/
+#define DANUBE_SDRAM_MC_LATENCY                   ((volatile u32*)(DANUBE_SDRAM+ 0x1038))
+#define DANUBE_SDRAM_MC_LATENCY_TRP (value)                (((( 1 << 4) - 1) & (value)) << 16)
+#define DANUBE_SDRAM_MC_LATENCY_TRAS (value)               (((( 1 << 4) - 1) & (value)) << 12)
+#define DANUBE_SDRAM_MC_LATENCY_TRCD (value)               (((( 1 << 4) - 1) & (value)) << 8)
+#define DANUBE_SDRAM_MC_LATENCY_TDPL (value)               (((( 1 << 4) - 1) & (value)) << 4)
+#define DANUBE_SDRAM_MC_LATENCY_TDAL (value)               (((( 1 << 4) - 1) & (value)) << 0)
+#define DANUBE_SDRAM_MC_LATENCY_Res (value)                (((( 1 << 12) - 1) & (value)) << 20)
+
+/***MC Refresh Cycle Time Register***/
+#define DANUBE_SDRAM_MC_TREFRESH                  ((volatile u32*)(DANUBE_SDRAM+ 0x1040))
+#define DANUBE_SDRAM_MC_TREFRESH_TREF (value)               (((( 1 << 13) - 1) & (value)) << 0)
+#define DANUBE_SDRAM_MC_TREFRESH_Res (value)                (((( 1 << 19) - 1) & (value)) << 13)
+
+
+/***********************************************************************/
+/*  Module      :  GPTU register address and bits                      */
+/***********************************************************************/
+
+#define DANUBE_GPTU                         (0xB8000300)
+/***********************************************************************/
+
+
+/***GPT Clock Control Register***/
+#define DANUBE_GPTU_GPT_CLC                      ((volatile u32*)(DANUBE_GPTU+ 0x0000))
+#define DANUBE_GPTU_GPT_CLC_RMC (value)                (((( 1 << 8) - 1) & (value)) << 8)
+#define DANUBE_GPTU_GPT_CLC_DISS                            (1 << 1)
+#define DANUBE_GPTU_GPT_CLC_DISR                            (1 << 0)
+
+/***GPT Timer 3 Control Register***/
+#define DANUBE_GPTU_GPT_T3CON                    ((volatile u32*)(DANUBE_GPTU+ 0x0014))
+#define DANUBE_GPTU_GPT_T3CON_T3RDIR                        (1 << 15)
+#define DANUBE_GPTU_GPT_T3CON_T3CHDIR                      (1 << 14)
+#define DANUBE_GPTU_GPT_T3CON_T3EDGE                        (1 << 13)
+#define DANUBE_GPTU_GPT_T3CON_BPS1 (value)               (((( 1 << 2) - 1) & (value)) << 11)
+#define DANUBE_GPTU_GPT_T3CON_T3OTL                          (1 << 10)
+#define DANUBE_GPTU_GPT_T3CON_T3UD                            (1 << 7)
+#define DANUBE_GPTU_GPT_T3CON_T3R                              (1 << 6)
+#define DANUBE_GPTU_GPT_T3CON_T3M (value)                (((( 1 << 3) - 1) & (value)) << 3)
+#define DANUBE_GPTU_GPT_T3CON_T3I (value)                (((( 1 << 3) - 1) & (value)) << 0)
+
+/***GPT Write Hardware Modified Timer 3 Control Register
+If set and clear bit are written concurrently with 1, the associated bit is not changed.***/
+#define DANUBE_GPTU_GPT_WHBT3CON                 ((volatile u32*)(DANUBE_GPTU+ 0x004C))
+#define DANUBE_GPTU_GPT_WHBT3CON_SETT3CHDIR                (1 << 15)
+#define DANUBE_GPTU_GPT_WHBT3CON_CLRT3CHDIR                (1 << 14)
+#define DANUBE_GPTU_GPT_WHBT3CON_SETT3EDGE                  (1 << 13)
+#define DANUBE_GPTU_GPT_WHBT3CON_CLRT3EDGE                  (1 << 12)
+#define DANUBE_GPTU_GPT_WHBT3CON_SETT3OTL                  (1 << 11)
+#define DANUBE_GPTU_GPT_WHBT3CON_CLRT3OTL                  (1 << 10)
+
+/***GPT Timer 2 Control Register***/
+#define DANUBE_GPTU_GPT_T2CON                    ((volatile u32*)(DANUBE_GPTU+ 0x0010))
+#define DANUBE_GPTU_GPT_T2CON_TxRDIR                        (1 << 15)
+#define DANUBE_GPTU_GPT_T2CON_TxCHDIR                      (1 << 14)
+#define DANUBE_GPTU_GPT_T2CON_TxEDGE                        (1 << 13)
+#define DANUBE_GPTU_GPT_T2CON_TxIRDIS                      (1 << 12)
+#define DANUBE_GPTU_GPT_T2CON_TxRC                            (1 << 9)
+#define DANUBE_GPTU_GPT_T2CON_TxUD                            (1 << 7)
+#define DANUBE_GPTU_GPT_T2CON_TxR                              (1 << 6)
+#define DANUBE_GPTU_GPT_T2CON_TxM (value)                (((( 1 << 3) - 1) & (value)) << 3)
+#define DANUBE_GPTU_GPT_T2CON_TxI (value)                (((( 1 << 3) - 1) & (value)) << 0)
+
+/***GPT Timer 4 Control Register***/
+#define DANUBE_GPTU_GPT_T4CON                    ((volatile u32*)(DANUBE_GPTU+ 0x0018))
+#define DANUBE_GPTU_GPT_T4CON_TxRDIR                        (1 << 15)
+#define DANUBE_GPTU_GPT_T4CON_TxCHDIR                      (1 << 14)
+#define DANUBE_GPTU_GPT_T4CON_TxEDGE                        (1 << 13)
+#define DANUBE_GPTU_GPT_T4CON_TxIRDIS                      (1 << 12)
+#define DANUBE_GPTU_GPT_T4CON_TxRC                            (1 << 9)
+#define DANUBE_GPTU_GPT_T4CON_TxUD                            (1 << 7)
+#define DANUBE_GPTU_GPT_T4CON_TxR                              (1 << 6)
+#define DANUBE_GPTU_GPT_T4CON_TxM (value)                (((( 1 << 3) - 1) & (value)) << 3)
+#define DANUBE_GPTU_GPT_T4CON_TxI (value)                (((( 1 << 3) - 1) & (value)) << 0)
+
+/***GPT Write HW Modified Timer 2 Control Register If set
+ and clear bit are written concurrently with 1, the associated bit is not changed.***/
+#define DANUBE_GPTU_GPT_WHBT2CON                 ((volatile u32*)(DANUBE_GPTU+ 0x0048))
+#define DANUBE_GPTU_GPT_WHBT2CON_SETTxCHDIR                (1 << 15)
+#define DANUBE_GPTU_GPT_WHBT2CON_CLRTxCHDIR                (1 << 14)
+#define DANUBE_GPTU_GPT_WHBT2CON_SETTxEDGE                  (1 << 13)
+#define DANUBE_GPTU_GPT_WHBT2CON_CLRTxEDGE                  (1 << 12)
+
+/***GPT Write HW Modified Timer 4 Control Register If set
+ and clear bit are written concurrently with 1, the associated bit is not changed.***/
+#define DANUBE_GPTU_GPT_WHBT4CON                 ((volatile u32*)(DANUBE_GPTU+ 0x0050))
+#define DANUBE_GPTU_GPT_WHBT4CON_SETTxCHDIR                (1 << 15)
+#define DANUBE_GPTU_GPT_WHBT4CON_CLRTxCHDIR                (1 << 14)
+#define DANUBE_GPTU_GPT_WHBT4CON_SETTxEDGE                  (1 << 13)
+#define DANUBE_GPTU_GPT_WHBT4CON_CLRTxEDGE                  (1 << 12)
+
+/***GPT Capture Reload Register***/
+#define DANUBE_GPTU_GPT_CAPREL                   ((volatile u32*)(DANUBE_GPTU+ 0x0030))
+#define DANUBE_GPTU_GPT_CAPREL_CAPREL (value)             (((( 1 << 16) - 1) & (value)) << 0)
+
+/***GPT Timer 2 Register***/
+#define DANUBE_GPTU_GPT_T2                       ((volatile u32*)(DANUBE_GPTU+ 0x0034))
+#define DANUBE_GPTU_GPT_T2_TVAL (value)               (((( 1 << 16) - 1) & (value)) << 0)
+
+/***GPT Timer 3 Register***/
+#define DANUBE_GPTU_GPT_T3                       ((volatile u32*)(DANUBE_GPTU+ 0x0038))
+#define DANUBE_GPTU_GPT_T3_TVAL (value)               (((( 1 << 16) - 1) & (value)) << 0)
+
+/***GPT Timer 4 Register***/
+#define DANUBE_GPTU_GPT_T4                       ((volatile u32*)(DANUBE_GPTU+ 0x003C))
+#define DANUBE_GPTU_GPT_T4_TVAL (value)               (((( 1 << 16) - 1) & (value)) << 0)
+
+/***GPT Timer 5 Register***/
+#define DANUBE_GPTU_GPT_T5                       ((volatile u32*)(DANUBE_GPTU+ 0x0040))
+#define DANUBE_GPTU_GPT_T5_TVAL (value)               (((( 1 << 16) - 1) & (value)) << 0)
+
+/***GPT Timer 6 Register***/
+#define DANUBE_GPTU_GPT_T6                       ((volatile u32*)(DANUBE_GPTU+ 0x0044))
+#define DANUBE_GPTU_GPT_T6_TVAL (value)               (((( 1 << 16) - 1) & (value)) << 0)
+
+/***GPT Timer 6 Control Register***/
+#define DANUBE_GPTU_GPT_T6CON                    ((volatile u32*)(DANUBE_GPTU+ 0x0020))
+#define DANUBE_GPTU_GPT_T6CON_T6SR                            (1 << 15)
+#define DANUBE_GPTU_GPT_T6CON_T6CLR                          (1 << 14)
+#define DANUBE_GPTU_GPT_T6CON_BPS2 (value)               (((( 1 << 2) - 1) & (value)) << 11)
+#define DANUBE_GPTU_GPT_T6CON_T6OTL                          (1 << 10)
+#define DANUBE_GPTU_GPT_T6CON_T6UD                            (1 << 7)
+#define DANUBE_GPTU_GPT_T6CON_T6R                              (1 << 6)
+#define DANUBE_GPTU_GPT_T6CON_T6M (value)                (((( 1 << 3) - 1) & (value)) << 3)
+#define DANUBE_GPTU_GPT_T6CON_T6I (value)                (((( 1 << 3) - 1) & (value)) << 0)
+
+/***GPT Write HW Modified Timer 6 Control Register If set
+ and clear bit are written concurrently with 1, the associated bit is not changed.***/
+#define DANUBE_GPTU_GPT_WHBT6CON                 ((volatile u32*)(DANUBE_GPTU+ 0x0054))
+#define DANUBE_GPTU_GPT_WHBT6CON_SETT6OTL                  (1 << 11)
+#define DANUBE_GPTU_GPT_WHBT6CON_CLRT6OTL                  (1 << 10)
+
+/***GPT Timer 5 Control Register***/
+#define DANUBE_GPTU_GPT_T5CON                    ((volatile u32*)(DANUBE_GPTU+ 0x001C))
+#define DANUBE_GPTU_GPT_T5CON_T5SC                            (1 << 15)
+#define DANUBE_GPTU_GPT_T5CON_T5CLR                          (1 << 14)
+#define DANUBE_GPTU_GPT_T5CON_CI (value)                (((( 1 << 2) - 1) & (value)) << 12)
+#define DANUBE_GPTU_GPT_T5CON_T5CC                            (1 << 11)
+#define DANUBE_GPTU_GPT_T5CON_CT3                              (1 << 10)
+#define DANUBE_GPTU_GPT_T5CON_T5RC                            (1 << 9)
+#define DANUBE_GPTU_GPT_T5CON_T5UDE                          (1 << 8)
+#define DANUBE_GPTU_GPT_T5CON_T5UD                            (1 << 7)
+#define DANUBE_GPTU_GPT_T5CON_T5R                              (1 << 6)
+#define DANUBE_GPTU_GPT_T5CON_T5M (value)                (((( 1 << 3) - 1) & (value)) << 3)
+#define DANUBE_GPTU_GPT_T5CON_T5I (value)                (((( 1 << 3) - 1) & (value)) << 0)
+
+
+/***********************************************************************/
+/*  Module      :  IOM register address and bits                       */
+/***********************************************************************/
+
+#define DANUBE_IOM                          (0xBF105000)
+/***********************************************************************/
+
+
+/***Receive FIFO***/
+#define DANUBE_IOM_RFIFO                        ((volatile u32*)(DANUBE_IOM+ 0x0000))
+#define DANUBE_IOM_RFIFO_RXD (value)                (((( 1 << 8) - 1) & (value)) << 0)
+
+/***Transmit FIFO***/
+#define DANUBE_IOM_XFIFO                        ((volatile u32*)(DANUBE_IOM+ 0x0000))
+#define DANUBE_IOM_XFIFO_TXD (value)                (((( 1 << 8) - 1) & (value)) << 0)
+
+/***Interrupt Status Register HDLC***/
+#define DANUBE_IOM_ISTAH                        ((volatile u32*)(DANUBE_IOM+ 0x0080))
+#define DANUBE_IOM_ISTAH_RME                              (1 << 7)
+#define DANUBE_IOM_ISTAH_RPF                              (1 << 6)
+#define DANUBE_IOM_ISTAH_RFO                              (1 << 5)
+#define DANUBE_IOM_ISTAH_XPR                              (1 << 4)
+#define DANUBE_IOM_ISTAH_XMR                              (1 << 3)
+#define DANUBE_IOM_ISTAH_XDU                              (1 << 2)
+
+/***Interrupt Mask Register HDLC***/
+#define DANUBE_IOM_MASKH                        ((volatile u32*)(DANUBE_IOM+ 0x0080))
+#define DANUBE_IOM_MASKH_RME                              (1 << 7)
+#define DANUBE_IOM_MASKH_RPF                              (1 << 6)
+#define DANUBE_IOM_MASKH_RFO                              (1 << 5)
+#define DANUBE_IOM_MASKH_XPR                              (1 << 4)
+#define DANUBE_IOM_MASKH_XMR                              (1 << 3)
+#define DANUBE_IOM_MASKH_XDU                              (1 << 2)
+
+/***Status Register***/
+#define DANUBE_IOM_STAR                         ((volatile u32*)(DANUBE_IOM+ 0x0084))
+#define DANUBE_IOM_STAR_XDOV                            (1 << 7)
+#define DANUBE_IOM_STAR_XFW                              (1 << 6)
+#define DANUBE_IOM_STAR_RACI                            (1 << 3)
+#define DANUBE_IOM_STAR_XACI                            (1 << 1)
+
+/***Command Register***/
+#define DANUBE_IOM_CMDR                         ((volatile u32*)(DANUBE_IOM+ 0x0084))
+#define DANUBE_IOM_CMDR_RMC                              (1 << 7)
+#define DANUBE_IOM_CMDR_RRES                            (1 << 6)
+#define DANUBE_IOM_CMDR_XTF                              (1 << 3)
+#define DANUBE_IOM_CMDR_XME                              (1 << 1)
+#define DANUBE_IOM_CMDR_XRES                            (1 << 0)
+
+/***Mode Register***/
+#define DANUBE_IOM_MODEH                        ((volatile u32*)(DANUBE_IOM+ 0x0088))
+#define DANUBE_IOM_MODEH_MDS2                            (1 << 7)
+#define DANUBE_IOM_MODEH_MDS1                            (1 << 6)
+#define DANUBE_IOM_MODEH_MDS0                            (1 << 5)
+#define DANUBE_IOM_MODEH_RAC                              (1 << 3)
+#define DANUBE_IOM_MODEH_DIM2                            (1 << 2)
+#define DANUBE_IOM_MODEH_DIM1                            (1 << 1)
+#define DANUBE_IOM_MODEH_DIM0                            (1 << 0)
+
+/***Extended Mode Register***/
+#define DANUBE_IOM_EXMR                         ((volatile u32*)(DANUBE_IOM+ 0x008C))
+#define DANUBE_IOM_EXMR_XFBS                            (1 << 7)
+#define DANUBE_IOM_EXMR_RFBS (value)               (((( 1 << 2) - 1) & (value)) << 5)
+#define DANUBE_IOM_EXMR_SRA                              (1 << 4)
+#define DANUBE_IOM_EXMR_XCRC                            (1 << 3)
+#define DANUBE_IOM_EXMR_RCRC                            (1 << 2)
+#define DANUBE_IOM_EXMR_ITF                              (1 << 0)
+
+/***SAPI1 Register***/
+#define DANUBE_IOM_SAP1                         ((volatile u32*)(DANUBE_IOM+ 0x0094))
+#define DANUBE_IOM_SAP1_SAPI1 (value)              (((( 1 << 6) - 1) & (value)) << 2)
+#define DANUBE_IOM_SAP1_MHA                              (1 << 0)
+
+/***Receive Frame Byte Count Low***/
+#define DANUBE_IOM_RBCL                         ((volatile u32*)(DANUBE_IOM+ 0x0098))
+#define DANUBE_IOM_RBCL_RBC(value)              (1 << value)
+
+
+/***SAPI2 Register***/
+#define DANUBE_IOM_SAP2                         ((volatile u32*)(DANUBE_IOM+ 0x0098))
+#define DANUBE_IOM_SAP2_SAPI2 (value)              (((( 1 << 6) - 1) & (value)) << 2)
+#define DANUBE_IOM_SAP2_MLA                              (1 << 0)
+
+/***Receive Frame Byte Count High***/
+#define DANUBE_IOM_RBCH                         ((volatile u32*)(DANUBE_IOM+ 0x009C))
+#define DANUBE_IOM_RBCH_OV                              (1 << 4)
+#define DANUBE_IOM_RBCH_RBC11                          (1 << 3)
+#define DANUBE_IOM_RBCH_RBC10                          (1 << 2)
+#define DANUBE_IOM_RBCH_RBC9                            (1 << 1)
+#define DANUBE_IOM_RBCH_RBC8                            (1 << 0)
+
+/***TEI1 Register 1***/
+#define DANUBE_IOM_TEI1                         ((volatile u32*)(DANUBE_IOM+ 0x009C))
+#define DANUBE_IOM_TEI1_TEI1 (value)               (((( 1 << 7) - 1) & (value)) << 1)
+#define DANUBE_IOM_TEI1_EA                              (1 << 0)
+
+/***Receive Status Register***/
+#define DANUBE_IOM_RSTA                         ((volatile u32*)(DANUBE_IOM+ 0x00A0))
+#define DANUBE_IOM_RSTA_VFR                              (1 << 7)
+#define DANUBE_IOM_RSTA_RDO                              (1 << 6)
+#define DANUBE_IOM_RSTA_CRC                              (1 << 5)
+#define DANUBE_IOM_RSTA_RAB                              (1 << 4)
+#define DANUBE_IOM_RSTA_SA1                              (1 << 3)
+#define DANUBE_IOM_RSTA_SA0                              (1 << 2)
+#define DANUBE_IOM_RSTA_TA                              (1 << 0)
+#define DANUBE_IOM_RSTA_CR                              (1 << 1)
+
+/***TEI2 Register***/
+#define DANUBE_IOM_TEI2                         ((volatile u32*)(DANUBE_IOM+ 0x00A0))
+#define DANUBE_IOM_TEI2_TEI2 (value)               (((( 1 << 7) - 1) & (value)) << 1)
+#define DANUBE_IOM_TEI2_EA                              (1 << 0)
+
+/***Test Mode Register HDLC***/
+#define DANUBE_IOM_TMH                          ((volatile u32*)(DANUBE_IOM+ 0x00A4))
+#define DANUBE_IOM_TMH_TLP                              (1 << 0)
+
+/***Command/Indication Receive 0***/
+#define DANUBE_IOM_CIR0                         ((volatile u32*)(DANUBE_IOM+ 0x00B8))
+#define DANUBE_IOM_CIR0_CODR0 (value)              (((( 1 << 4) - 1) & (value)) << 4)
+#define DANUBE_IOM_CIR0_CIC0                            (1 << 3)
+#define DANUBE_IOM_CIR0_CIC1                            (1 << 2)
+#define DANUBE_IOM_CIR0_SG                              (1 << 1)
+#define DANUBE_IOM_CIR0_BAS                              (1 << 0)
+
+/***Command/Indication Transmit 0***/
+#define DANUBE_IOM_CIX0                         ((volatile u32*)(DANUBE_IOM+ 0x00B8))
+#define DANUBE_IOM_CIX0_CODX0 (value)              (((( 1 << 4) - 1) & (value)) << 4)
+#define DANUBE_IOM_CIX0_TBA2                            (1 << 3)
+#define DANUBE_IOM_CIX0_TBA1                            (1 << 2)
+#define DANUBE_IOM_CIX0_TBA0                            (1 << 1)
+#define DANUBE_IOM_CIX0_BAC                              (1 << 0)
+
+/***Command/Indication Receive 1***/
+#define DANUBE_IOM_CIR1                         ((volatile u32*)(DANUBE_IOM+ 0x00BC))
+#define DANUBE_IOM_CIR1_CODR1 (value)              (((( 1 << 6) - 1) & (value)) << 2)
+
+/***Command/Indication Transmit 1***/
+#define DANUBE_IOM_CIX1                         ((volatile u32*)(DANUBE_IOM+ 0x00BC))
+#define DANUBE_IOM_CIX1_CODX1 (value)              (((( 1 << 6) - 1) & (value)) << 2)
+#define DANUBE_IOM_CIX1_CICW                            (1 << 1)
+#define DANUBE_IOM_CIX1_CI1E                            (1 << 0)
+
+/***Controller Data Access Reg. (CH10)***/
+#define DANUBE_IOM_CDA10                        ((volatile u32*)(DANUBE_IOM+ 0x0100))
+#define DANUBE_IOM_CDA10_CDA (value)                (((( 1 << 8) - 1) & (value)) << 0)
+
+/***Controller Data Access Reg. (CH11)***/
+#define DANUBE_IOM_CDA11                        ((volatile u32*)(DANUBE_IOM+ 0x0104))
+#define DANUBE_IOM_CDA11_CDA (value)                (((( 1 << 8) - 1) & (value)) << 0)
+
+/***Controller Data Access Reg. (CH20)***/
+#define DANUBE_IOM_CDA20                        ((volatile u32*)(DANUBE_IOM+ 0x0108))
+#define DANUBE_IOM_CDA20_CDA (value)                (((( 1 << 8) - 1) & (value)) << 0)
+
+/***Controller Data Access Reg. (CH21)***/
+#define DANUBE_IOM_CDA21                        ((volatile u32*)(DANUBE_IOM+ 0x010C))
+#define DANUBE_IOM_CDA21_CDA (value)                (((( 1 << 8) - 1) & (value)) << 0)
+
+/***Time Slot and Data Port Sel. (CH10)***/
+#define DANUBE_IOM_CDA_TSDP10                   ((volatile u32*)(DANUBE_IOM+ 0x0110))
+#define DANUBE_IOM_CDA_TSDP10_DPS                              (1 << 7)
+#define DANUBE_IOM_CDA_TSDP10_TSS (value)                (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Time Slot and Data Port Sel. (CH11)***/
+#define DANUBE_IOM_CDA_TSDP11                   ((volatile u32*)(DANUBE_IOM+ 0x0114))
+#define DANUBE_IOM_CDA_TSDP11_DPS                              (1 << 7)
+#define DANUBE_IOM_CDA_TSDP11_TSS (value)                (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Time Slot and Data Port Sel. (CH20)***/
+#define DANUBE_IOM_CDA_TSDP20                   ((volatile u32*)(DANUBE_IOM+ 0x0118))
+#define DANUBE_IOM_CDA_TSDP20_DPS                              (1 << 7)
+#define DANUBE_IOM_CDA_TSDP20_TSS (value)                (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Time Slot and Data Port Sel. (CH21)***/
+#define DANUBE_IOM_CDA_TSDP21                   ((volatile u32*)(DANUBE_IOM+ 0x011C))
+#define DANUBE_IOM_CDA_TSDP21_DPS                              (1 << 7)
+#define DANUBE_IOM_CDA_TSDP21_TSS (value)                (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Time Slot and Data Port Sel. (CH10)***/
+#define DANUBE_IOM_CO_TSDP10                    ((volatile u32*)(DANUBE_IOM+ 0x0120))
+#define DANUBE_IOM_CO_TSDP10_DPS                              (1 << 7)
+#define DANUBE_IOM_CO_TSDP10_TSS (value)                (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Time Slot and Data Port Sel. (CH11)***/
+#define DANUBE_IOM_CO_TSDP11                    ((volatile u32*)(DANUBE_IOM+ 0x0124))
+#define DANUBE_IOM_CO_TSDP11_DPS                              (1 << 7)
+#define DANUBE_IOM_CO_TSDP11_TSS (value)                (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Time Slot and Data Port Sel. (CH20)***/
+#define DANUBE_IOM_CO_TSDP20                    ((volatile u32*)(DANUBE_IOM+ 0x0128))
+#define DANUBE_IOM_CO_TSDP20_DPS                              (1 << 7)
+#define DANUBE_IOM_CO_TSDP20_TSS (value)                (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Time Slot and Data Port Sel. (CH21)***/
+#define DANUBE_IOM_CO_TSDP21                    ((volatile u32*)(DANUBE_IOM+ 0x012C))
+#define DANUBE_IOM_CO_TSDP21_DPS                              (1 << 7)
+#define DANUBE_IOM_CO_TSDP21_TSS (value)                (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Ctrl. Reg. Contr. Data Access CH1x***/
+#define DANUBE_IOM_CDA1_CR                      ((volatile u32*)(DANUBE_IOM+ 0x0138))
+#define DANUBE_IOM_CDA1_CR_EN_TBM                        (1 << 5)
+#define DANUBE_IOM_CDA1_CR_EN_I1                          (1 << 4)
+#define DANUBE_IOM_CDA1_CR_EN_I0                          (1 << 3)
+#define DANUBE_IOM_CDA1_CR_EN_O1                          (1 << 2)
+#define DANUBE_IOM_CDA1_CR_EN_O0                          (1 << 1)
+#define DANUBE_IOM_CDA1_CR_SWAP                            (1 << 0)
+
+/***Ctrl. Reg. Contr. Data Access CH1x***/
+#define DANUBE_IOM_CDA2_CR                      ((volatile u32*)(DANUBE_IOM+ 0x013C))
+#define DANUBE_IOM_CDA2_CR_EN_TBM                        (1 << 5)
+#define DANUBE_IOM_CDA2_CR_EN_I1                          (1 << 4)
+#define DANUBE_IOM_CDA2_CR_EN_I0                          (1 << 3)
+#define DANUBE_IOM_CDA2_CR_EN_O1                          (1 << 2)
+#define DANUBE_IOM_CDA2_CR_EN_O0                          (1 << 1)
+#define DANUBE_IOM_CDA2_CR_SWAP                            (1 << 0)
+
+/***Control Register B-Channel Data***/
+#define DANUBE_IOM_BCHA_CR                      ((volatile u32*)(DANUBE_IOM+ 0x0144))
+#define DANUBE_IOM_BCHA_CR_EN_BC2                        (1 << 4)
+#define DANUBE_IOM_BCHA_CR_EN_BC1                        (1 << 3)
+
+/***Control Register B-Channel Data***/
+#define DANUBE_IOM_BCHB_CR                      ((volatile u32*)(DANUBE_IOM+ 0x0148))
+#define DANUBE_IOM_BCHB_CR_EN_BC2                        (1 << 4)
+#define DANUBE_IOM_BCHB_CR_EN_BC1                        (1 << 3)
+
+/***Control Reg. for HDLC and CI1 Data***/
+#define DANUBE_IOM_DCI_CR                       ((volatile u32*)(DANUBE_IOM+ 0x014C))
+#define DANUBE_IOM_DCI_CR_DPS_CI1                      (1 << 7)
+#define DANUBE_IOM_DCI_CR_EN_CI1                        (1 << 6)
+#define DANUBE_IOM_DCI_CR_EN_D                            (1 << 5)
+
+/***Control Reg. for HDLC and CI1 Data***/
+#define DANUBE_IOM_DCIC_CR                      ((volatile u32*)(DANUBE_IOM+ 0x014C))
+#define DANUBE_IOM_DCIC_CR_DPS_CI0                      (1 << 7)
+#define DANUBE_IOM_DCIC_CR_EN_CI0                        (1 << 6)
+#define DANUBE_IOM_DCIC_CR_DPS_D                          (1 << 5)
+
+/***Control Reg. Serial Data Strobe x***/
+#define DANUBE_IOM_SDS_CR                       ((volatile u32*)(DANUBE_IOM+ 0x0154))
+#define DANUBE_IOM_SDS_CR_ENS_TSS                      (1 << 7)
+#define DANUBE_IOM_SDS_CR_ENS_TSS_1                  (1 << 6)
+#define DANUBE_IOM_SDS_CR_ENS_TSS_3                  (1 << 5)
+#define DANUBE_IOM_SDS_CR_TSS (value)                (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Control Register IOM Data***/
+#define DANUBE_IOM_IOM_CR                       ((volatile u32*)(DANUBE_IOM+ 0x015C))
+#define DANUBE_IOM_IOM_CR_SPU                              (1 << 7)
+#define DANUBE_IOM_IOM_CR_CI_CS                          (1 << 5)
+#define DANUBE_IOM_IOM_CR_TIC_DIS                      (1 << 4)
+#define DANUBE_IOM_IOM_CR_EN_BCL                        (1 << 3)
+#define DANUBE_IOM_IOM_CR_CLKM                            (1 << 2)
+#define DANUBE_IOM_IOM_CR_Res                              (1 << 1)
+#define DANUBE_IOM_IOM_CR_DIS_IOM                      (1 << 0)
+
+/***Synchronous Transfer Interrupt***/
+#define DANUBE_IOM_STI                          ((volatile u32*)(DANUBE_IOM+ 0x0160))
+#define DANUBE_IOM_STI_STOV21                        (1 << 7)
+#define DANUBE_IOM_STI_STOV20                        (1 << 6)
+#define DANUBE_IOM_STI_STOV11                        (1 << 5)
+#define DANUBE_IOM_STI_STOV10                        (1 << 4)
+#define DANUBE_IOM_STI_STI21                          (1 << 3)
+#define DANUBE_IOM_STI_STI20                          (1 << 2)
+#define DANUBE_IOM_STI_STI11                          (1 << 1)
+#define DANUBE_IOM_STI_STI10                          (1 << 0)
+
+/***Acknowledge Synchronous Transfer Interrupt***/
+#define DANUBE_IOM_ASTI                         ((volatile u32*)(DANUBE_IOM+ 0x0160))
+#define DANUBE_IOM_ASTI_ACK21                          (1 << 3)
+#define DANUBE_IOM_ASTI_ACK20                          (1 << 2)
+#define DANUBE_IOM_ASTI_ACK11                          (1 << 1)
+#define DANUBE_IOM_ASTI_ACK10                          (1 << 0)
+
+/***Mask Synchronous Transfer Interrupt***/
+#define DANUBE_IOM_MSTI                         ((volatile u32*)(DANUBE_IOM+ 0x0164))
+#define DANUBE_IOM_MSTI_STOV21                        (1 << 7)
+#define DANUBE_IOM_MSTI_STOV20                        (1 << 6)
+#define DANUBE_IOM_MSTI_STOV11                        (1 << 5)
+#define DANUBE_IOM_MSTI_STOV10                        (1 << 4)
+#define DANUBE_IOM_MSTI_STI21                          (1 << 3)
+#define DANUBE_IOM_MSTI_STI20                          (1 << 2)
+#define DANUBE_IOM_MSTI_STI11                          (1 << 1)
+#define DANUBE_IOM_MSTI_STI10                          (1 << 0)
+
+/***Configuration Register for Serial Data Strobes***/
+#define DANUBE_IOM_SDS_CONF                    ((volatile u32*)(DANUBE_IOM+ 0x0168))
+#define DANUBE_IOM_SDS_CONF_SDS_BCL                      (1 << 0)
+
+/***Monitoring CDA Bits***/
+#define DANUBE_IOM_MCDA                         ((volatile u32*)(DANUBE_IOM+ 0x016C))
+#define DANUBE_IOM_MCDA_MCDA21 (value)             (((( 1 << 2) - 1) & (value)) << 6)
+#define DANUBE_IOM_MCDA_MCDA20 (value)             (((( 1 << 2) - 1) & (value)) << 4)
+#define DANUBE_IOM_MCDA_MCDA11 (value)             (((( 1 << 2) - 1) & (value)) << 2)
+#define DANUBE_IOM_MCDA_MCDA10 (value)             (((( 1 << 2) - 1) & (value)) << 0)
+
+/***********************************************************************/
+/*  Module      :  ASC0 register address and bits                      */
+/***********************************************************************/
+#define DANUBE_ASC0                          (KSEG1+0x1E100400)
+/***********************************************************************/
+#define DANUBE_ASC0_TBUF                        ((volatile u32*)(DANUBE_ASC0 + 0x0020))
+#define DANUBE_ASC0_RBUF                        ((volatile u32*)(DANUBE_ASC0 + 0x0024))
+#define DANUBE_ASC0_FSTAT                       ((volatile u32*)(DANUBE_ASC0 + 0x0048))
+#define DANUBE_ASC0_FSTAT_TXFREE_GET(value)     (((value) >> 24) & ((1 << 6) - 1))
+#define DANUBE_ASC0_FSTAT_TXFREE_SET(value)     (((( 1 << 6) - 1) & (value)) << 24)
+#define DANUBE_ASC0_FSTAT_RXFREE_GET(value)     (((value) >> 16) & ((1 << 6) - 1))
+#define DANUBE_ASC0_FSTAT_RXFREE_SET(value)     (((( 1 << 6) - 1) & (value)) << 16)
+#define DANUBE_ASC0_FSTAT_TXFFL_GET(value)      (((value) >> 8) & ((1 << 6) - 1))
+#define DANUBE_ASC0_FSTAT_TXFFL_SET(value)      (((( 1 << 6) - 1) & (value)) << 8)
+#define DANUBE_ASC0_FSTAT_RXFFL_GET(value)      (((value) >> 0) & ((1 << 6) - 1))
+#define DANUBE_ASC0_FSTAT_RXFFL_SET(value)      (((( 1 << 6) - 1) & (value)) << 0)
+
+
+/***********************************************************************/
+/*  Module      :  ASC1 register address and bits                      */
+/***********************************************************************/
+
+#define DANUBE_ASC1                          (KSEG1+0x1E100C00)
+	/***********************************************************************/
+
+#define DANUBE_ASC1_TBUF                        ((volatile u32*)(DANUBE_ASC1 + 0x0020))
+#define DANUBE_ASC1_RBUF                        ((volatile u32*)(DANUBE_ASC1 + 0x0024))
+#define DANUBE_ASC1_FSTAT                       ((volatile u32*)(DANUBE_ASC1 + 0x0048))
+#define DANUBE_ASC1_FSTAT_TXFREE_GET(value)     (((value) >> 24) & ((1 << 6) - 1))
+#define DANUBE_ASC1_FSTAT_TXFREE_SET(value)     (((( 1 << 6) - 1) & (value)) << 24)
+#define DANUBE_ASC1_FSTAT_RXFREE_GET(value)     (((value) >> 16) & ((1 << 6) - 1))
+#define DANUBE_ASC1_FSTAT_RXFREE_SET(value)     (((( 1 << 6) - 1) & (value)) << 16)
+#define DANUBE_ASC1_FSTAT_TXFFL_GET(value)      (((value) >> 8) & ((1 << 6) - 1))
+#define DANUBE_ASC1_FSTAT_TXFFL_SET(value)      (((( 1 << 6) - 1) & (value)) << 8)
+#define DANUBE_ASC1_FSTAT_RXFFL_GET(value)      (((value) >> 0) & ((1 << 6) - 1))
+#define DANUBE_ASC1_FSTAT_RXFFL_SET(value)      (((( 1 << 6) - 1) & (value)) << 0)
+
+/***********************************************************************/
+/*  Module      :  DMA register address and bits                       */
+/***********************************************************************/
+
+#define DANUBE_DMA                          (0xBE104100)
+/***********************************************************************/
+
+#define DANUBE_DMA_BASE                 DANUBE_DMA
+#define DANUBE_DMA_CLC                  (volatile u32*)DANUBE_DMA_BASE
+#define DANUBE_DMA_ID                   (volatile u32*)(DANUBE_DMA_BASE+0x08)
+#define DANUBE_DMA_CTRL                 (volatile u32*)(DANUBE_DMA_BASE+0x10)
+#define DANUBE_DMA_CPOLL                (volatile u32*)(DANUBE_DMA_BASE+0x14)
+#define DANUBE_DMA_CS                   (volatile u32*)(DANUBE_DMA_BASE+0x18)
+#define DANUBE_DMA_CCTRL                (volatile u32*)(DANUBE_DMA_BASE+0x1C)
+#define DANUBE_DMA_CDBA                 (volatile u32*)(DANUBE_DMA_BASE+0x20)
+#define DANUBE_DMA_CDLEN                (volatile u32*)(DANUBE_DMA_BASE+0x24)
+#define DANUBE_DMA_CIS                  (volatile u32*)(DANUBE_DMA_BASE+0x28)
+#define DANUBE_DMA_CIE                  (volatile u32*)(DANUBE_DMA_BASE+0x2C)
+
+#define DANUBE_DMA_PS                   (volatile u32*)(DANUBE_DMA_BASE+0x40)
+#define DANUBE_DMA_PCTRL                (volatile u32*)(DANUBE_DMA_BASE+0x44)
+
+#define DANUBE_DMA_IRNEN                (volatile u32*)(DANUBE_DMA_BASE+0xf4)
+#define DANUBE_DMA_IRNCR                (volatile u32*)(DANUBE_DMA_BASE+0xf8)
+#define DANUBE_DMA_IRNICR               (volatile u32*)(DANUBE_DMA_BASE+0xfc)
+/***********************************************************************/
+/*  Module      :  Debug register address and bits                     */
+/***********************************************************************/
+
+#define DANUBE_Debug                        (0xBF106000)
+/***********************************************************************/
+
+
+/***MCD Break Bus Switch Register***/
+#define DANUBE_Debug_MCD_BBS                      ((volatile u32*)(DANUBE_Debug+ 0x0000))
+#define DANUBE_Debug_MCD_BBS_BTP1                            (1 << 19)
+#define DANUBE_Debug_MCD_BBS_BTP0                            (1 << 18)
+#define DANUBE_Debug_MCD_BBS_BSP1                            (1 << 17)
+#define DANUBE_Debug_MCD_BBS_BSP0                            (1 << 16)
+#define DANUBE_Debug_MCD_BBS_BT5EN                          (1 << 15)
+#define DANUBE_Debug_MCD_BBS_BT4EN                          (1 << 14)
+#define DANUBE_Debug_MCD_BBS_BT5                              (1 << 13)
+#define DANUBE_Debug_MCD_BBS_BT4                              (1 << 12)
+#define DANUBE_Debug_MCD_BBS_BS5EN                          (1 << 7)
+#define DANUBE_Debug_MCD_BBS_BS4EN                          (1 << 6)
+#define DANUBE_Debug_MCD_BBS_BS5                              (1 << 5)
+#define DANUBE_Debug_MCD_BBS_BS4                              (1 << 4)
+
+/***MCD Multiplexer Control Register***/
+#define DANUBE_Debug_MCD_MCR                      ((volatile u32*)(DANUBE_Debug+ 0x0008))
+#define DANUBE_Debug_MCD_MCR_MUX5                            (1 << 4)
+#define DANUBE_Debug_MCD_MCR_MUX4                            (1 << 3)
+#define DANUBE_Debug_MCD_MCR_MUX1                            (1 << 0)
+
+
+/***********************************************************************/
+/*  Module      :  SRAM register address and bits                      */
+/***********************************************************************/
+
+#define DANUBE_SRAM                         (0xBF980000)
+/***********************************************************************/
+
+
+/***SRAM Size Register***/
+#define DANUBE_SRAM_SRAM_SIZE                    ((volatile u32*)(DANUBE_SRAM+ 0x0800))
+#define DANUBE_SRAM_SRAM_SIZE_SIZE (value)               (((( 1 << 23) - 1) & (value)) << 0)
+
+/***********************************************************************/
+/*  Module      :  BIU register address and bits                       */
+/***********************************************************************/
+
+#define DANUBE_BIU                          (0xBFA80000)
+/***********************************************************************/
+
+
+/***BIU Identification Register***/
+#define DANUBE_BIU_BIU_ID                       ((volatile u32*)(DANUBE_BIU+ 0x0000))
+#define DANUBE_BIU_BIU_ID_ARCH                            (1 << 16)
+#define DANUBE_BIU_BIU_ID_ID (value)                (((( 1 << 8) - 1) & (value)) << 8)
+#define DANUBE_BIU_BIU_ID_REV (value)                (((( 1 << 8) - 1) & (value)) << 0)
+
+/***BIU Access Error Cause Register***/
+#define DANUBE_BIU_BIU_ERRCAUSE                 ((volatile u32*)(DANUBE_BIU+ 0x0100))
+#define DANUBE_BIU_BIU_ERRCAUSE_ERR                              (1 << 31)
+#define DANUBE_BIU_BIU_ERRCAUSE_PORT (value)               (((( 1 << 4) - 1) & (value)) << 16)
+#define DANUBE_BIU_BIU_ERRCAUSE_CAUSE (value)              (((( 1 << 2) - 1) & (value)) << 0)
+
+/***BIU Access Error Address Register***/
+#define DANUBE_BIU_BIU_ERRADDR                  ((volatile u32*)(DANUBE_BIU+ 0x0108))
+#define DANUBE_BIU_BIU_ERRADDR_ADDR
+
+
+/***********************************************************************/
+/*  Module      :  ICU register address and bits                       */
+/***********************************************************************/
+
+#define DANUBE_ICU                          (0xBF880200)
+#define DANUBE_ICU                          (0xBF880200)
+#define DANUBE_ICU_EXI                      (0xBF101000)
+/***********************************************************************/
+
+
+/***IM0 Interrupt Status Register***/
+#define DANUBE_ICU_IM0_ISR                      ((volatile u32*)(DANUBE_ICU+ 0x0000))
+#define DANUBE_ICU_IM0_ISR_IR(value)               (1 << (value))
+
+
+/***IM1 Interrupt Status Register***/
+#define DANUBE_ICU_IM1_ISR                      ((volatile u32*)(DANUBE_ICU+ 0x0020))
+#define DANUBE_ICU_IM1_ISR_IR(value)               (1 << (value))
+
+
+/***IM2 Interrupt Status Register***/
+#define DANUBE_ICU_IM2_ISR                      ((volatile u32*)(DANUBE_ICU+ 0x0040))
+#define DANUBE_ICU_IM2_ISR_IR(value)               (1 << (value))
+
+/***IM3 Interrupt Status Register***/
+#define DANUBE_ICU_IM3_ISR                      ((volatile u32*)(DANUBE_ICU+ 0x0060))
+#define DANUBE_ICU_IM3_ISR_IR(value)               (1 << (value))
+
+/***IM4 Interrupt Status Register***/
+#define DANUBE_ICU_IM4_ISR                      ((volatile u32*)(DANUBE_ICU+ 0x0080))
+#define DANUBE_ICU_IM4_ISR_IR(value)               (1 << (value))
+
+
+/***IM0 Interrupt Enable Register***/
+#define DANUBE_ICU_IM0_IER                      ((volatile u32*)(DANUBE_ICU+ 0x0008))
+#define DANUBE_ICU_IM0_IER_IR(value)               (1 << (value))
+
+
+/***IM1 Interrupt Enable Register***/
+#define DANUBE_ICU_IM1_IER                      ((volatile u32*)(DANUBE_ICU+ 0x0028))
+#define DANUBE_ICU_IM1_IER_IR(value)               (1 << (value))
+
+
+/***IM2 Interrupt Enable Register***/
+#define DANUBE_ICU_IM2_IER                      ((volatile u32*)(DANUBE_ICU+ 0x0048))
+#define DANUBE_ICU_IM2_IER_IR(value)               (1 << (value)8
+
+/***IM3 Interrupt Enable Register***/
+#define DANUBE_ICU_IM3_IER                      ((volatile u32*)(DANUBE_ICU+ 0x0068))
+#define DANUBE_ICU_IM3_IER_IR(value)               (1 << (value))
+
+/***IM4 Interrupt Enable Register***/
+#define DANUBE_ICU_IM4_IER                      ((volatile u32*)(DANUBE_ICU+ 0x0088))
+#define DANUBE_ICU_IM4_IER_IR(value)               (1 << (value))
+
+
+/***IM0 Interrupt Output Status Register***/
+#define DANUBE_ICU_IM0_IOSR                    ((volatile u32*)(DANUBE_ICU+ 0x0010))
+#define DANUBE_ICU_IM0_IOSR_IR(value)               (1 << (value))
+
+
+/***IM1 Interrupt Output Status Register***/
+#define DANUBE_ICU_IM1_IOSR                    ((volatile u32*)(DANUBE_ICU+ 0x0030))
+#define DANUBE_ICU_IM1_IOSR_IR(value)               (1 << (value))
+
+
+/***IM2 Interrupt Output Status Register***/
+#define DANUBE_ICU_IM2_IOSR                    ((volatile u32*)(DANUBE_ICU+ 0x0050))
+#define DANUBE_ICU_IM2_IOSR_IR(value)               (1 << (value))
+
+/***IM3 Interrupt Output Status Register***/
+#define DANUBE_ICU_IM3_IOSR                    ((volatile u32*)(DANUBE_ICU+ 0x0070))
+#define DANUBE_ICU_IM3_IOSR_IR(value)               (1 << (value))
+
+/***IM4 Interrupt Output Status Register***/
+#define DANUBE_ICU_IM4_IOSR                    ((volatile u32*)(DANUBE_ICU+ 0x0090))
+#define DANUBE_ICU_IM4_IOSR_IR(value)               (1 << (value))
+
+
+/***IM0 Interrupt Request Set Register***/
+#define DANUBE_ICU_IM0_IRSR                    ((volatile u32*)(DANUBE_ICU+ 0x0018))
+#define DANUBE_ICU_IM0_IRSR_IR(value)               (1 << (value))
+
+
+/***IM1 Interrupt Request Set Register***/
+#define DANUBE_ICU_IM1_IRSR                    ((volatile u32*)(DANUBE_ICU+ 0x0038))
+#define DANUBE_ICU_IM1_IRSR_IR(value)               (1 << (value))
+
+
+/***IM2 Interrupt Request Set Register***/
+#define DANUBE_ICU_IM2_IRSR                    ((volatile u32*)(DANUBE_ICU+ 0x0058))
+#define DANUBE_ICU_IM2_IRSR_IR(value)               (1 << (value))
+
+/***IM3 Interrupt Request Set Register***/
+#define DANUBE_ICU_IM3_IRSR                    ((volatile u32*)(DANUBE_ICU+ 0x0078))
+#define DANUBE_ICU_IM3_IRSR_IR(value)               (1 << (value))
+
+/***IM4 Interrupt Request Set Register***/
+#define DANUBE_ICU_IM4_IRSR                    ((volatile u32*)(DANUBE_ICU+ 0x0098))
+#define DANUBE_ICU_IM4_IRSR_IR(value)               (1 << (value))
+
+/***Interrupt Vector Value Register***/
+#define DANUBE_ICU_IM_VEC                      ((volatile u32*)(DANUBE_ICU+ 0x0060))
+
+/***Interrupt Vector Value Mask***/
+#define DANUBE_ICU_IM0_VEC_MASK                0x0000001f
+#define DANUBE_ICU_IM1_VEC_MASK                0x000003e0
+#define DANUBE_ICU_IM2_VEC_MASK                0x00007c00
+#define DANUBE_ICU_IM3_VEC_MASK                0x000f8000
+#define DANUBE_ICU_IM4_VEC_MASK                0x01f00000
+
+/***DMA Interrupt Mask Value***/
+#define DANUBE_DMA_H_MASK			0x00000fff
+
+/***External Interrupt Control Register***/
+#define DANUBE_ICU_EXTINTCR                ((volatile u32*)(DANUBE_ICU_EXI+ 0x0000))
+#define DANUBE_ICU_IRNICR                  ((volatile u32*)(DANUBE_ICU_EXI+ 0x0004))
+#define DANUBE_ICU_IRNCR                   ((volatile u32*)(DANUBE_ICU_EXI+ 0x0008))
+#define DANUBE_ICU_IRNEN                   ((volatile u32*)(DANUBE_ICU_EXI+ 0x000c))
+#define DANUBE_ICU_NMI_CR                   ((volatile u32*)(DANUBE_ICU_EXI+ 0x00f0))
+#define DANUBE_ICU_NMI_SR                   ((volatile u32*)(DANUBE_ICU_EXI+ 0x00f4))
+
+/***********************************************************************/
+/*  Module      :  MPS register address and bits                       */
+/***********************************************************************/
+
+#define DANUBE_MPS                          (KSEG1+0x1F107000)
+/***********************************************************************/
+
+#define DANUBE_MPS_CHIPID                       ((volatile u32*)(DANUBE_MPS + 0x0344))
+#define DANUBE_MPS_CHIPID_VERSION_GET(value)    (((value) >> 28) & ((1 << 4) - 1))
+#define DANUBE_MPS_CHIPID_VERSION_SET(value)    (((( 1 << 4) - 1) & (value)) << 28)
+#define DANUBE_MPS_CHIPID_PARTNUM_GET(value)    (((value) >> 12) & ((1 << 16) - 1))
+#define DANUBE_MPS_CHIPID_PARTNUM_SET(value)    (((( 1 << 16) - 1) & (value)) << 12)
+#define DANUBE_MPS_CHIPID_MANID_GET(value)      (((value) >> 1) & ((1 << 10) - 1))
+#define DANUBE_MPS_CHIPID_MANID_SET(value)      (((( 1 << 10) - 1) & (value)) << 1)
+
+
+/* voice channel 0 ... 3 interrupt enable register */
+#define DANUBE_MPS_VC0ENR ((volatile u32*)(DANUBE_MPS + 0x0000))
+#define DANUBE_MPS_VC1ENR ((volatile u32*)(DANUBE_MPS + 0x0004))
+#define DANUBE_MPS_VC2ENR ((volatile u32*)(DANUBE_MPS + 0x0008))
+#define DANUBE_MPS_VC3ENR ((volatile u32*)(DANUBE_MPS + 0x000C))
+/* voice channel 0 ... 3 interrupt status read register */
+#define DANUBE_MPS_RVC0SR ((volatile u32*)(DANUBE_MPS + 0x0010))
+#define DANUBE_MPS_RVC1SR ((volatile u32*)(DANUBE_MPS + 0x0014))
+#define DANUBE_MPS_RVC2SR ((volatile u32*)(DANUBE_MPS + 0x0018))
+#define DANUBE_MPS_RVC3SR ((volatile u32*)(DANUBE_MPS + 0x001C))
+/* voice channel 0 ... 3 interrupt status set register */
+#define DANUBE_MPS_SVC0SR ((volatile u32*)(DANUBE_MPS + 0x0020))
+#define DANUBE_MPS_SVC1SR ((volatile u32*)(DANUBE_MPS + 0x0024))
+#define DANUBE_MPS_SVC2SR ((volatile u32*)(DANUBE_MPS + 0x0028))
+#define DANUBE_MPS_SVC3SR ((volatile u32*)(DANUBE_MPS + 0x002C))
+/* voice channel 0 ... 3 interrupt status clear register */
+#define DANUBE_MPS_CVC0SR ((volatile u32*)(DANUBE_MPS + 0x0030))
+#define DANUBE_MPS_CVC1SR ((volatile u32*)(DANUBE_MPS + 0x0034))
+#define DANUBE_MPS_CVC2SR ((volatile u32*)(DANUBE_MPS + 0x0038))
+#define DANUBE_MPS_CVC3SR ((volatile u32*)(DANUBE_MPS + 0x003C))
+/* common status 0 and 1 read register */
+#define DANUBE_MPS_RAD0SR ((volatile u32*)(DANUBE_MPS + 0x0040))
+#define DANUBE_MPS_RAD1SR ((volatile u32*)(DANUBE_MPS + 0x0044))
+/* common status 0 and 1 set register */
+#define DANUBE_MPS_SAD0SR ((volatile u32*)(DANUBE_MPS + 0x0048))
+#define DANUBE_MPS_SAD1SR ((volatile u32*)(DANUBE_MPS + 0x004C))
+/* common status 0 and 1 clear register */
+#define DANUBE_MPS_CAD0SR ((volatile u32*)(DANUBE_MPS + 0x0050))
+#define DANUBE_MPS_CAD1SR ((volatile u32*)(DANUBE_MPS + 0x0054))
+/* common status 0 and 1 enable register */
+#define DANUBE_MPS_AD0ENR ((volatile u32*)(DANUBE_MPS + 0x0058))
+#define DANUBE_MPS_AD1ENR ((volatile u32*)(DANUBE_MPS + 0x005C))
+/* notification enable register */
+#define DANUBE_MPS_CPU0_NFER ((volatile u32*)(DANUBE_MPS + 0x0060))
+#define DANUBE_MPS_CPU1_NFER ((volatile u32*)(DANUBE_MPS + 0x0064))
+/* CPU to CPU interrup request register */
+#define DANUBE_MPS_CPU0_2_CPU1_IRR ((volatile u32*)(DANUBE_MPS + 0x0070))
+#define DANUBE_MPS_CPU0_2_CPU1_IER ((volatile u32*)(DANUBE_MPS + 0x0074))
+/* Global interrupt request and request enable register */
+#define DANUBE_MPS_GIRR ((volatile u32*)(DANUBE_MPS + 0x0078))
+#define DANUBE_MPS_GIER ((volatile u32*)(DANUBE_MPS + 0x007C))
+
+
+#define DANUBE_MPS_CPU0_SMP0 ((volatile u32*)(DANUBE_MPS + 0x00100))
+
+#define DANUBE_MPS_CPU1_SMP0 ((volatile u32*)(DANUBE_MPS + 0x00200))
+
+/************************************************************************/
+/*   Module       :   DEU register address and bits        		*/
+/************************************************************************/
+#define DANUBE_DEU_BASE_ADDR               (0xBE102000)
+/*   DEU Control Register */
+#define DANUBE_DEU_CLK                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0000))
+#define DANUBE_DEU_ID                      ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0008))
+
+/*   DEU control register */
+#define DANUBE_DEU_CON                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0010))
+#define DANUBE_DEU_IHR                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0014))
+#define DANUBE_DEU_ILR                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0018))
+#define DANUBE_DEU_K1HR                    ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x001C))
+#define DANUBE_DEU_K1LR                    ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0020))
+#define DANUBE_DEU_K3HR                    ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0024))
+#define DANUBE_DEU_K3LR                    ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0028))
+#define DANUBE_DEU_IVHR                    ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x002C))
+#define DANUBE_DEU_IVLR                    ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0030))
+#define DANUBE_DEU_OHR                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0040))
+#define DANUBE_DEU_OLR                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0050))
+
+/* AES DEU register */
+#define DANUBE_AES_CON 			   ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0050))
+#define DANUBE_AES_ID3R                    ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0054))
+#define DANUBE_AES_ID2R                    ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0058))
+#define DANUBE_AES_ID1R                    ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x005C))
+#define DANUBE_AES_ID0R                    ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0060))
+
+/* AES Key register */
+#define DANUBE_AES_K7R                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0064))
+#define DANUBE_AES_K6R                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0068))
+#define DANUBE_AES_K5R                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x006C))
+#define DANUBE_AES_K4R                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0070))
+#define DANUBE_AES_K3R                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0074))
+#define DANUBE_AES_K2R                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0078))
+#define DANUBE_AES_K1R                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x007C))
+#define DANUBE_AES_K0R                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0080))
+
+/* AES vector register */
+#define DANUBE_AES_IV3R                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0084))
+#define DANUBE_AES_IV2R                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0088))
+#define DANUBE_AES_IV1R                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x008C))
+#define DANUBE_AES_IV0R                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0090))
+#define DANUBE_AES_0D3R                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0094))
+#define DANUBE_AES_0D2R                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0098))
+#define DANUBE_AES_OD1R                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x009C))
+#define DANUBE_AES_OD0R                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00A0))
+
+/* hash control registe */
+#define DANUBE_HASH_CON                    ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00B0))
+#define DANUBE_HASH_MR                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00B4))
+#define DANUBE_HASH_D1R                    ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00B8 ))
+#define DANUBE_HASH_D2R                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00BC ))
+#define DANUBE_HASH_D3R                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00C0 ))
+#define DANUBE_HASH_D4R                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00C4))
+#define DANUBE_HASH_D5R                     ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00C8))
+
+#define DANUBE_CON                         ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00EC))
+
+
+
+
+/************************************************************************/
+/*   Module       :   PPE register address and bits        		*/
+/************************************************************************/
+#define DANUBE_PPE_BASE_ADDR                (KSEG1 + 0x1E180000)
+#define DANUBE_PPE_PP32_DEBUG_REG_ADDR(x)          ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x0000) << 2)))
+#define DANUBE_PPE_PPM_INT_REG_ADDR(x)             ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x0030) << 2)))
+#define DANUBE_PPE_PP32_INTERNAL_RES_ADDR(x)       ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x0040) << 2)))
+#define DANUBE_PPE_PPE_CLOCK_CONTROL_ADDR(x)       ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x0100) << 2)))
+#define DANUBE_PPE_CDM_CODE_MEMORY_RAM0_ADDR(x)    ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x1000) << 2)))
+#define DANUBE_PPE_CDM_CODE_MEMORY_RAM1_ADDR(x)    ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x2000) << 2)))
+#define DANUBE_PPE_REG_ADDR(x)                     ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x4000) << 2)))
+#define DANUBE_PPE_PP32_DATA_MEMORY_RAM1_ADDR(x)   ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x5000) << 2)))
+#define DANUBE_PPE_PPM_INT_UNIT_ADDR(x)            ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x6000) << 2)))
+#define DANUBE_PPE_PPM_TIMER0_ADDR(x)              ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x6100) << 2)))
+#define DANUBE_PPE_PPM_TASK_IND_REG_ADDR(x)        ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x6200) << 2)))
+#define DANUBE_PPE_PPS_BRK_ADDR(x)                 ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x6300) << 2)))
+#define DANUBE_PPE_PPM_TIMER1_ADDR(x)              ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x6400) << 2)))
+#define DANUBE_PPE_SB_RAM0_ADDR(x)                 ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x8000) << 2)))
+#define DANUBE_PPE_SB_RAM1_ADDR(x)                 ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x8400) << 2)))
+#define DANUBE_PPE_SB_RAM2_ADDR(x)                 ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x8C00) << 2)))
+#define DANUBE_PPE_SB_RAM3_ADDR(x)                 ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x9600) << 2)))
+
+#define DANUBE_PPE_PP32_SLEEP                      DANUBE_PPE_REG_ADDR(0x0010) /* PP32 Power Saving Register */
+#define DANUBE_PPE_CDM_CFG                         DANUBE_PPE_REG_ADDR(0x0100) /* Code/Data Memory (CDM) Register */
+
+/* Mailbox Registers */
+#define DANUBE_PPE_MBOX_IGU0_ISRS                  DANUBE_PPE_REG_ADDR(0x0200)
+#define DANUBE_PPE_MBOX_IGU0_ISRC                  DANUBE_PPE_REG_ADDR(0x0201)
+#define DANUBE_PPE_MBOX_IGU0_ISR                   DANUBE_PPE_REG_ADDR(0x0202)
+#define DANUBE_PPE_MBOX_IGU0_IER                   DANUBE_PPE_REG_ADDR(0x0203)
+#define DANUBE_PPE_MBOX_IGU1_ISRS0                 DANUBE_PPE_REG_ADDR(0x0204)
+#define DANUBE_PPE_MBOX_IGU1_ISRC0                 DANUBE_PPE_REG_ADDR(0x0205)
+#define DANUBE_PPE_MBOX_IGU1_ISR0                  DANUBE_PPE_REG_ADDR(0x0206)
+#define DANUBE_PPE_MBOX_IGU1_IER0                  DANUBE_PPE_REG_ADDR(0x0207)
+#define DANUBE_PPE_MBOX_IGU1_ISRS1                 DANUBE_PPE_REG_ADDR(0x0208)
+#define DANUBE_PPE_MBOX_IGU1_ISRC1                 DANUBE_PPE_REG_ADDR(0x0209)
+#define DANUBE_PPE_MBOX_IGU1_ISR1                  DANUBE_PPE_REG_ADDR(0x020A)
+#define DANUBE_PPE_MBOX_IGU1_IER1                  DANUBE_PPE_REG_ADDR(0x020B)
+#define DANUBE_PPE_MBOX_IGU1_ISRS2                 DANUBE_PPE_REG_ADDR(0x020C)
+#define DANUBE_PPE_MBOX_IGU1_ISRC2                 DANUBE_PPE_REG_ADDR(0x020D)
+#define DANUBE_PPE_MBOX_IGU1_ISR2                  DANUBE_PPE_REG_ADDR(0x020E)
+#define DANUBE_PPE_MBOX_IGU1_IER2                  DANUBE_PPE_REG_ADDR(0x020F)
+#define DANUBE_PPE_MBOX_IGU2_ISRS                  DANUBE_PPE_REG_ADDR(0x0210)
+#define DANUBE_PPE_MBOX_IGU2_ISRC                  DANUBE_PPE_REG_ADDR(0x0211)
+#define DANUBE_PPE_MBOX_IGU2_ISR                   DANUBE_PPE_REG_ADDR(0x0212)
+#define DANUBE_PPE_MBOX_IGU2_IER                   DANUBE_PPE_REG_ADDR(0x0213)
+#define DANUBE_PPE_MBOX_IGU3_ISRS                  DANUBE_PPE_REG_ADDR(0x0214)
+#define DANUBE_PPE_MBOX_IGU3_ISRC                  DANUBE_PPE_REG_ADDR(0x0215)
+#define DANUBE_PPE_MBOX_IGU3_ISR                   DANUBE_PPE_REG_ADDR(0x0216)
+#define DANUBE_PPE_MBOX_IGU3_IER                   DANUBE_PPE_REG_ADDR(0x0217)
+#define DANUBE_PPE_MBOX_IGU4_ISRS                  DANUBE_PPE_REG_ADDR(0x0218)
+#define DANUBE_PPE_MBOX_IGU4_ISRC                  DANUBE_PPE_REG_ADDR(0x0219)
+#define DANUBE_PPE_MBOX_IGU4_ISR                   DANUBE_PPE_REG_ADDR(0x021A)
+#define DANUBE_PPE_MBOX_IGU4_IER                   DANUBE_PPE_REG_ADDR(0x021B)
+/*
+ *    Shared Buffer (SB) Registers
+ */
+#define DANUBE_PPE_SB_MST_PRI0                     DANUBE_PPE_REG_ADDR(0x0300)
+#define DANUBE_PPE_SB_MST_PRI1                     DANUBE_PPE_REG_ADDR(0x0301)
+#define DANUBE_PPE_SB_MST_PRI2                     DANUBE_PPE_REG_ADDR(0x0302)
+#define DANUBE_PPE_SB_MST_PRI3                     DANUBE_PPE_REG_ADDR(0x0303)
+#define DANUBE_PPE_SB_MST_PRI4                     DANUBE_PPE_REG_ADDR(0x0304)
+#define DANUBE_PPE_SB_MST_SEL                      DANUBE_PPE_REG_ADDR(0x0305)
+/*
+ *    RTHA Registers
+ */
+#define DANUBE_PPE_RFBI_CFG                        DANUBE_PPE_REG_ADDR(0x0400)
+#define DANUBE_PPE_RBA_CFG0                        DANUBE_PPE_REG_ADDR(0x0404)
+#define DANUBE_PPE_RBA_CFG1                        DANUBE_PPE_REG_ADDR(0x0405)
+#define DANUBE_PPE_RCA_CFG0                        DANUBE_PPE_REG_ADDR(0x0408)
+#define DANUBE_PPE_RCA_CFG1                        DANUBE_PPE_REG_ADDR(0x0409)
+#define DANUBE_PPE_RDES_CFG0                       DANUBE_PPE_REG_ADDR(0x040C)
+#define DANUBE_PPE_RDES_CFG1                       DANUBE_PPE_REG_ADDR(0x040D)
+#define DANUBE_PPE_SFSM_STATE0                     DANUBE_PPE_REG_ADDR(0x0410)
+#define DANUBE_PPE_SFSM_STATE1                     DANUBE_PPE_REG_ADDR(0x0411)
+#define DANUBE_PPE_SFSM_DBA0                       DANUBE_PPE_REG_ADDR(0x0412)
+#define DANUBE_PPE_SFSM_DBA1                       DANUBE_PPE_REG_ADDR(0x0413)
+#define DANUBE_PPE_SFSM_CBA0                       DANUBE_PPE_REG_ADDR(0x0414)
+#define DANUBE_PPE_SFSM_CBA1                       DANUBE_PPE_REG_ADDR(0x0415)
+#define DANUBE_PPE_SFSM_CFG0                       DANUBE_PPE_REG_ADDR(0x0416)
+#define DANUBE_PPE_SFSM_CFG1                       DANUBE_PPE_REG_ADDR(0x0417)
+#define DANUBE_PPE_SFSM_PGCNT0                     DANUBE_PPE_REG_ADDR(0x041C)
+#define DANUBE_PPE_SFSM_PGCNT1                     DANUBE_PPE_REG_ADDR(0x041D)
+/*
+ *    TTHA Registers
+ */
+#define DANUBE_PPE_FFSM_DBA0                       DANUBE_PPE_REG_ADDR(0x0508)
+#define DANUBE_PPE_FFSM_DBA1                       DANUBE_PPE_REG_ADDR(0x0509)
+#define DANUBE_PPE_FFSM_CFG0                       DANUBE_PPE_REG_ADDR(0x050A)
+#define DANUBE_PPE_FFSM_CFG1                       DANUBE_PPE_REG_ADDR(0x050B)
+#define DANUBE_PPE_FFSM_IDLE_HEAD_BC0              DANUBE_PPE_REG_ADDR(0x050E)
+#define DANUBE_PPE_FFSM_IDLE_HEAD_BC1              DANUBE_PPE_REG_ADDR(0x050F)
+#define DANUBE_PPE_FFSM_PGCNT0                     DANUBE_PPE_REG_ADDR(0x0514)
+#define DANUBE_PPE_FFSM_PGCNT1                     DANUBE_PPE_REG_ADDR(0x0515)
+/*
+ *    ETOP MDIO Registers
+ */
+#define DANUBE_PPE_ETOP_MDIO_CFG                   DANUBE_PPE_REG_ADDR(0x0600)
+#define DANUBE_PPE_ETOP_MDIO_ACC                   DANUBE_PPE_REG_ADDR(0x0601)
+#define DANUBE_PPE_ETOP_CFG                        DANUBE_PPE_REG_ADDR(0x0602)
+#define DANUBE_PPE_ETOP_IG_VLAN_COS                DANUBE_PPE_REG_ADDR(0x0603)
+#define DANUBE_PPE_ETOP_IG_DSCP_COS3               DANUBE_PPE_REG_ADDR(0x0604)
+#define DANUBE_PPE_ETOP_IG_DSCP_COS2               DANUBE_PPE_REG_ADDR(0x0605)
+#define DANUBE_PPE_ETOP_IG_DSCP_COS1               DANUBE_PPE_REG_ADDR(0x0606)
+#define DANUBE_PPE_ETOP_IG_DSCP_COS0               DANUBE_PPE_REG_ADDR(0x0607)
+#define DANUBE_PPE_ETOP_IG_PLEN_CTRL0              DANUBE_PPE_REG_ADDR(0x0608)
+#define DANUBE_PPE_ETOP_IG_PLEN_CTRL1              DANUBE_PPE_REG_ADDR(0x0609)
+#define DANUBE_PPE_ETOP_ISR                        DANUBE_PPE_REG_ADDR(0x060A)
+#define DANUBE_PPE_ETOP_IER                        DANUBE_PPE_REG_ADDR(0x060B)
+#define DANUBE_PPE_ETOP_VPID                       DANUBE_PPE_REG_ADDR(0x060C)
+#define DANUBE_PPE_ENET_MAC_CFG                    DANUBE_PPE_REG_ADDR(0x0610)
+#define DANUBE_PPE_ENETS_DBA                       DANUBE_PPE_REG_ADDR(0x0612)
+#define DANUBE_PPE_ENETS_CBA                       DANUBE_PPE_REG_ADDR(0x0613)
+#define DANUBE_PPE_ENETS_CFG                       DANUBE_PPE_REG_ADDR(0x0614)
+#define DANUBE_PPE_ENETS_PGCNT                     DANUBE_PPE_REG_ADDR(0x0615)
+#define DANUBE_PPE_ENETS_PGCNT_DSRC_PP32	   (0x00020000)
+#define DANUBE_PPE_ENETS_PGCNT_DVAL_SHIFT	   (9)
+#define DANUBE_PPE_ENETS_PGCNT_DCMD	           (0x00000100)
+#define DANUBE_PPE_ENETS_PKTCNT                    DANUBE_PPE_REG_ADDR(0x0616)
+#define DANUBE_PPE_ENETS_PKTCNT_DSRC_PP32	   (0x00000200)
+#define DANUBE_PPE_ENETS_PKTCNT_DCMD	           (0x00000100)
+#define DANUBE_PPE_ENETS_PKTCNT_UPKT	           (0x000000FF)
+#define DANUBE_PPE_ENETS_BUF_CTRL                  DANUBE_PPE_REG_ADDR(0x0617)
+#define DANUBE_PPE_ENETS_COS_CFG                   DANUBE_PPE_REG_ADDR(0x0618)
+#define DANUBE_PPE_ENETS_IGDROP                    DANUBE_PPE_REG_ADDR(0x0619)
+#define DANUBE_PPE_ENETF_DBA                       DANUBE_PPE_REG_ADDR(0x0630)
+#define DANUBE_PPE_ENETF_CBA                       DANUBE_PPE_REG_ADDR(0x0631)
+#define DANUBE_PPE_ENETF_CFG                       DANUBE_PPE_REG_ADDR(0x0632)
+#define DANUBE_PPE_ENETF_PGCNT                     DANUBE_PPE_REG_ADDR(0x0633)
+#define DANUBE_PPE_ENETF_PGCNT_ISRC_PP32	   (0x00020000)
+#define DANUBE_PPE_ENETF_PGCNT_IVAL_SHIFT	   (9)
+#define DANUBE_PPE_ENETF_PGCNT_ICMD	           (0x00000100)
+#define DANUBE_PPE_ENETF_PKTCNT                    DANUBE_PPE_REG_ADDR(0x0634)
+#define DANUBE_PPE_ENETF_PKTCNT_ISRC_PP32	   (0x00000200)
+#define DANUBE_PPE_ENETF_PKTCNT_ICMD	           (0x00000100)
+#define DANUBE_PPE_ENETF_PKTCNT_VPKT	           (0x000000FF)
+#define DANUBE_PPE_ENETF_HFCTRL                    DANUBE_PPE_REG_ADDR(0x0635)
+#define DANUBE_PPE_ENETF_TXCTRL                    DANUBE_PPE_REG_ADDR(0x0636)
+#define DANUBE_PPE_ENETF_VLCOS0                    DANUBE_PPE_REG_ADDR(0x0638)
+#define DANUBE_PPE_ENETF_VLCOS1                    DANUBE_PPE_REG_ADDR(0x0639)
+#define DANUBE_PPE_ENETF_VLCOS2                    DANUBE_PPE_REG_ADDR(0x063A)
+#define DANUBE_PPE_ENETF_VLCOS3                    DANUBE_PPE_REG_ADDR(0x063B)
+#define DANUBE_PPE_ENETF_EGERR                     DANUBE_PPE_REG_ADDR(0x063C)
+#define DANUBE_PPE_ENETF_EGDROP                    DANUBE_PPE_REG_ADDR(0x063D)
+/*
+ *    DPLUS Registers
+ */
+#define DANUBE_PPE_DPLUS_TXDB                      DANUBE_PPE_REG_ADDR(0x0700)
+#define DANUBE_PPE_DPLUS_TXCB                      DANUBE_PPE_REG_ADDR(0x0701)
+#define DANUBE_PPE_DPLUS_TXCFG                     DANUBE_PPE_REG_ADDR(0x0702)
+#define DANUBE_PPE_DPLUS_TXPGCNT                   DANUBE_PPE_REG_ADDR(0x0703)
+#define DANUBE_PPE_DPLUS_RXDB                      DANUBE_PPE_REG_ADDR(0x0710)
+#define DANUBE_PPE_DPLUS_RXCB                      DANUBE_PPE_REG_ADDR(0x0711)
+#define DANUBE_PPE_DPLUS_RXCFG                     DANUBE_PPE_REG_ADDR(0x0712)
+#define DANUBE_PPE_DPLUS_RXPGCNT                   DANUBE_PPE_REG_ADDR(0x0713)
+/*
+ *    BMC Registers
+ */
+#define DANUBE_PPE_BMC_CMD3                        DANUBE_PPE_REG_ADDR(0x0800)
+#define DANUBE_PPE_BMC_CMD2                        DANUBE_PPE_REG_ADDR(0x0801)
+#define DANUBE_PPE_BMC_CMD1                        DANUBE_PPE_REG_ADDR(0x0802)
+#define DANUBE_PPE_BMC_CMD0                        DANUBE_PPE_REG_ADDR(0x0803)
+#define DANUBE_PPE_BMC_CFG0                        DANUBE_PPE_REG_ADDR(0x0804)
+#define DANUBE_PPE_BMC_CFG1                        DANUBE_PPE_REG_ADDR(0x0805)
+#define DANUBE_PPE_BMC_POLY0                       DANUBE_PPE_REG_ADDR(0x0806)
+#define DANUBE_PPE_BMC_POLY1                       DANUBE_PPE_REG_ADDR(0x0807)
+#define DANUBE_PPE_BMC_CRC0                        DANUBE_PPE_REG_ADDR(0x0808)
+#define DANUBE_PPE_BMC_CRC1                        DANUBE_PPE_REG_ADDR(0x0809)
+/*
+ *    SLL Registers
+ */
+#define DANUBE_PPE_SLL_CMD1                        DANUBE_PPE_REG_ADDR(0x0900)
+#define DANUBE_PPE_SLL_CMD0                        DANUBE_PPE_REG_ADDR(0x0901)
+#define DANUBE_PPE_SLL_KEY0                        DANUBE_PPE_REG_ADDR(0x0910)
+#define DANUBE_PPE_SLL_KEY1                        DANUBE_PPE_REG_ADDR(0x0911)
+#define DANUBE_PPE_SLL_KEY2                        DANUBE_PPE_REG_ADDR(0x0912)
+#define DANUBE_PPE_SLL_KEY3                        DANUBE_PPE_REG_ADDR(0x0913)
+#define DANUBE_PPE_SLL_KEY4                        DANUBE_PPE_REG_ADDR(0x0914)
+#define DANUBE_PPE_SLL_KEY5                        DANUBE_PPE_REG_ADDR(0x0915)
+#define DANUBE_PPE_SLL_RESULT                      DANUBE_PPE_REG_ADDR(0x0920)
+/*
+ *    EMA Registers
+ */
+#define DANUBE_PPE_EMA_CMD2                        DANUBE_PPE_REG_ADDR(0x0A00)
+#define DANUBE_PPE_EMA_CMD1                        DANUBE_PPE_REG_ADDR(0x0A01)
+#define DANUBE_PPE_EMA_CMD0                        DANUBE_PPE_REG_ADDR(0x0A02)
+#define DANUBE_PPE_EMA_ISR                         DANUBE_PPE_REG_ADDR(0x0A04)
+#define DANUBE_PPE_EMA_IER                         DANUBE_PPE_REG_ADDR(0x0A05)
+#define DANUBE_PPE_EMA_CFG                         DANUBE_PPE_REG_ADDR(0x0A06)
+/*
+ *    UTPS Registers
+ */
+#define DANUBE_PPE_UTP_TXCA0                       DANUBE_PPE_REG_ADDR(0x0B00)
+#define DANUBE_PPE_UTP_TXNA0                       DANUBE_PPE_REG_ADDR(0x0B01)
+#define DANUBE_PPE_UTP_TXCA1                       DANUBE_PPE_REG_ADDR(0x0B02)
+#define DANUBE_PPE_UTP_TXNA1                       DANUBE_PPE_REG_ADDR(0x0B03)
+#define DANUBE_PPE_UTP_RXCA0                       DANUBE_PPE_REG_ADDR(0x0B10)
+#define DANUBE_PPE_UTP_RXNA0                       DANUBE_PPE_REG_ADDR(0x0B11)
+#define DANUBE_PPE_UTP_RXCA1                       DANUBE_PPE_REG_ADDR(0x0B12)
+#define DANUBE_PPE_UTP_RXNA1                       DANUBE_PPE_REG_ADDR(0x0B13)
+#define DANUBE_PPE_UTP_CFG                         DANUBE_PPE_REG_ADDR(0x0B20)
+#define DANUBE_PPE_UTP_ISR                         DANUBE_PPE_REG_ADDR(0x0B30)
+#define DANUBE_PPE_UTP_IER                         DANUBE_PPE_REG_ADDR(0x0B31)
+/*
+ *    QSB Registers
+ */
+#define DANUBE_PPE_QSB_RELOG                       DANUBE_PPE_REG_ADDR(0x0C00)
+#define DANUBE_PPE_QSB_EMIT0                       DANUBE_PPE_REG_ADDR(0x0C01)
+#define DANUBE_PPE_QSB_EMIT1                       DANUBE_PPE_REG_ADDR(0x0C02)
+#define DANUBE_PPE_QSB_ICDV                        DANUBE_PPE_REG_ADDR(0x0C07)
+#define DANUBE_PPE_QSB_SBL                         DANUBE_PPE_REG_ADDR(0x0C09)
+#define DANUBE_PPE_QSB_CFG                         DANUBE_PPE_REG_ADDR(0x0C0A)
+#define DANUBE_PPE_QSB_RTM                         DANUBE_PPE_REG_ADDR(0x0C0B)
+#define DANUBE_PPE_QSB_RTD                         DANUBE_PPE_REG_ADDR(0x0C0C)
+#define DANUBE_PPE_QSB_RAMAC                       DANUBE_PPE_REG_ADDR(0x0C0D)
+#define DANUBE_PPE_QSB_ISTAT                       DANUBE_PPE_REG_ADDR(0x0C0E)
+#define DANUBE_PPE_QSB_IMR                         DANUBE_PPE_REG_ADDR(0x0C0F)
+#define DANUBE_PPE_QSB_SRC                         DANUBE_PPE_REG_ADDR(0x0C10)
+/*
+ *    DSP User Registers
+ */
+#define DANUBE_PPE_DREG_A_VERSION                  DANUBE_PPE_REG_ADDR(0x0D00)
+#define DANUBE_PPE_DREG_A_CFG                      DANUBE_PPE_REG_ADDR(0x0D01)
+#define DANUBE_PPE_DREG_AT_CTRL                    DANUBE_PPE_REG_ADDR(0x0D02)
+#define DANUBE_PPE_DREG_AR_CTRL                    DANUBE_PPE_REG_ADDR(0x0D08)
+#define DANUBE_PPE_DREG_A_UTPCFG                   DANUBE_PPE_REG_ADDR(0x0D0E)
+#define DANUBE_PPE_DREG_A_STATUS                   DANUBE_PPE_REG_ADDR(0x0D0F)
+#define DANUBE_PPE_DREG_AT_CFG0                    DANUBE_PPE_REG_ADDR(0x0D20)
+#define DANUBE_PPE_DREG_AT_CFG1                    DANUBE_PPE_REG_ADDR(0x0D21)
+#define DANUBE_PPE_DREG_FB_SIZE0                   DANUBE_PPE_REG_ADDR(0x0D22)
+#define DANUBE_PPE_DREG_FB_SIZE1                   DANUBE_PPE_REG_ADDR(0x0D23)
+#define DANUBE_PPE_DREG_AT_CELL0                   DANUBE_PPE_REG_ADDR(0x0D24)
+#define DANUBE_PPE_DREG_AT_CELL1                   DANUBE_PPE_REG_ADDR(0x0D25)
+#define DANUBE_PPE_DREG_AT_IDLE_CNT0               DANUBE_PPE_REG_ADDR(0x0D26)
+#define DANUBE_PPE_DREG_AT_IDLE_CNT1               DANUBE_PPE_REG_ADDR(0x0D27)
+#define DANUBE_PPE_DREG_AT_IDLE0                   DANUBE_PPE_REG_ADDR(0x0D28)
+#define DANUBE_PPE_DREG_AT_IDLE1                   DANUBE_PPE_REG_ADDR(0x0D29)
+#define DANUBE_PPE_DREG_AR_CFG0                    DANUBE_PPE_REG_ADDR(0x0D60)
+#define DANUBE_PPE_DREG_AR_CFG1                    DANUBE_PPE_REG_ADDR(0x0D61)
+#define DANUBE_PPE_DREG_AR_FB_START0               DANUBE_PPE_REG_ADDR(0x0D62)
+#define DANUBE_PPE_DREG_AR_FB_START1               DANUBE_PPE_REG_ADDR(0x0D63)
+#define DANUBE_PPE_DREG_AR_FB_END0                 DANUBE_PPE_REG_ADDR(0x0D64)
+#define DANUBE_PPE_DREG_AR_FB_END1                 DANUBE_PPE_REG_ADDR(0x0D65)
+#define DANUBE_PPE_DREG_AR_ATM_STAT0               DANUBE_PPE_REG_ADDR(0x0D66)
+#define DANUBE_PPE_DREG_AR_ATM_STAT1               DANUBE_PPE_REG_ADDR(0x0D67)
+#define DANUBE_PPE_DREG_AR_CELL0                   DANUBE_PPE_REG_ADDR(0x0D68)
+#define DANUBE_PPE_DREG_AR_CELL1                   DANUBE_PPE_REG_ADDR(0x0D69)
+#define DANUBE_PPE_DREG_AR_IDLE_CNT0               DANUBE_PPE_REG_ADDR(0x0D6A)
+#define DANUBE_PPE_DREG_AR_IDLE_CNT1               DANUBE_PPE_REG_ADDR(0x0D6B)
+#define DANUBE_PPE_DREG_AR_AIIDLE_CNT0             DANUBE_PPE_REG_ADDR(0x0D6C)
+#define DANUBE_PPE_DREG_AR_AIIDLE_CNT1             DANUBE_PPE_REG_ADDR(0x0D6D)
+#define DANUBE_PPE_DREG_AR_BE_CNT0                 DANUBE_PPE_REG_ADDR(0x0D6E)
+#define DANUBE_PPE_DREG_AR_BE_CNT1                 DANUBE_PPE_REG_ADDR(0x0D6F)
+#define DANUBE_PPE_DREG_AR_HEC_CNT0                DANUBE_PPE_REG_ADDR(0x0D70)
+#define DANUBE_PPE_DREG_AR_HEC_CNT1                DANUBE_PPE_REG_ADDR(0x0D71)
+#define DANUBE_PPE_DREG_AR_CD_CNT0                 DANUBE_PPE_REG_ADDR(0x0D72)
+#define DANUBE_PPE_DREG_AR_CD_CNT1                 DANUBE_PPE_REG_ADDR(0x0D73)
+#define DANUBE_PPE_DREG_AR_IDLE0                   DANUBE_PPE_REG_ADDR(0x0D74)
+#define DANUBE_PPE_DREG_AR_IDLE1                   DANUBE_PPE_REG_ADDR(0x0D75)
+#define DANUBE_PPE_DREG_AR_DELIN0                  DANUBE_PPE_REG_ADDR(0x0D76)
+#define DANUBE_PPE_DREG_AR_DELIN1                  DANUBE_PPE_REG_ADDR(0x0D77)
+#define DANUBE_PPE_DREG_RESV0                      DANUBE_PPE_REG_ADDR(0x0D78)
+#define DANUBE_PPE_DREG_RESV1                      DANUBE_PPE_REG_ADDR(0x0D79)
+#define DANUBE_PPE_DREG_RX_MIB_CMD0                DANUBE_PPE_REG_ADDR(0x0D80)
+#define DANUBE_PPE_DREG_RX_MIB_CMD1                DANUBE_PPE_REG_ADDR(0x0D81)
+#define DANUBE_PPE_DREG_AR_OVDROP_CNT0             DANUBE_PPE_REG_ADDR(0x0D98)
+#define DANUBE_PPE_DREG_AR_OVDROP_CNT1             DANUBE_PPE_REG_ADDR(0x0D99)
+
+
+/************************************************************************/
+/*   Module       :   PPE register address and bits        		*/
+/************************************************************************/
+#define DANUBE_PPE32_BASE  0xBE180000
+#define DANUBE_PPE32_DEBUG_BREAK_TRACE_REG   (DANUBE_PPE32_BASE + (0x0000 * 4))
+#define DANUBE_PPE32_INT_MASK_STATUS_REG     (DANUBE_PPE32_BASE + (0x0030 * 4))
+#define DANUBE_PPE32_INT_RESOURCE_REG        (DANUBE_PPE32_BASE + (0x0040 * 4))
+#define DANUBE_PPE32_CDM_CODE_MEM_B0         (DANUBE_PPE32_BASE + (0x1000 * 4))
+#define DANUBE_PPE32_CDM_CODE_MEM_B1         (DANUBE_PPE32_BASE + (0x2000 * 4))
+#define DANUBE_PPE32_DATA_MEM_MAP_REG_BASE   (DANUBE_PPE32_BASE + (0x4000 * 4))
+
+/*
+ *    ETOP MDIO Registers
+ */
+#define ETOP_MDIO_CFG           ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0600 * 4)))
+#define ETOP_MDIO_ACC           ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0601 * 4)))
+#define ETOP_CFG                ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0602 * 4)))
+#define ETOP_IG_VLAN_COS        ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0603 * 4)))
+#define ETOP_IG_DSCP_COS3       ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0604 * 4)))
+#define ETOP_IG_DSCP_COS2       ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0605 * 4)))
+#define ETOP_IG_DSCP_COS1       ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0606 * 4)))
+#define ETOP_IG_DSCP_COS0       ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0607 * 4)))
+#define ETOP_IG_PLEN_CTRL       ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0608 * 4)))
+#define ETOP_ISR                ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060A * 4)))
+#define ETOP_IER                ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060B * 4)))
+#define ETOP_VPID               ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060C * 4)))
+#define ENET_MAC_CFG            ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0610 * 4)))
+#define ENETS_DBA               ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0612 * 4)))
+#define ENETS_CBA               ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0613 * 4)))
+#define ENETS_CFG               ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0614 * 4)))
+#define ENETS_PGCNT             ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0615 * 4)))
+#define ENETS_PKTCNT            ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0616 * 4)))
+#define ENETS_BUF_CTRL          ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0617 * 4)))
+#define ENETS_COS_CFG           ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0618 * 4)))
+#define ENETS_IGDROP            ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0619 * 4)))
+#define ENETS_IGERR             ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x061A * 4)))
+#define ENET_MAC_DA0           ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x061B * 4)))
+#define ENET_MAC_DA1           ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x061C * 4)))
+
+#define ENETF_DBA               ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0630 * 4)))
+#define ENETF_CBA               ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0631 * 4)))
+#define ENETF_CFG               ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0632 * 4)))
+#define ENETF_PGCNT             ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0633 * 4)))
+#define ENETF_PKTCNT            ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0634 * 4)))
+#define ENETF_HFCTRL            ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0635 * 4)))
+#define ENETF_TXCTRL            ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0636 * 4)))
+
+#define ENETF_VLCOS0            ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0638 * 4)))
+#define ENETF_VLCOS1            ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0639 * 4)))
+#define ENETF_VLCOS2            ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x063A * 4)))
+#define ENETF_VLCOS3            ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x063B * 4)))
+#define ENETF_EGERR             ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x063C * 4)))
+#define ENETF_EGDROP            ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x063D * 4)))
+
+
+/*
+ *    ETOP MDIO Registers
+ */
+#define DANUBE_PPE32_ETOP_MDIO_CFG           ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0600 * 4)))
+#define DANUBE_PPE32_ETOP_MDIO_ACC           ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0601 * 4)))
+#define DANUBE_PPE32_ETOP_CFG                ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0602 * 4)))
+#define DANUBE_PPE32_ETOP_IG_VLAN_COS        ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0603 * 4)))
+#define DANUBE_PPE32_ETOP_IG_DSCP_COS3       ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0604 * 4)))
+#define DANUBE_PPE32_ETOP_IG_DSCP_COS2       ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0605 * 4)))
+#define DANUBE_PPE32_ETOP_IG_DSCP_COS1       ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0606 * 4)))
+#define DANUBE_PPE32_ETOP_IG_DSCP_COS0       ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0607 * 4)))
+#define DANUBE_PPE32_ETOP_IG_PLEN_CTRL       ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0608 * 4)))
+#define DANUBE_PPE32_ETOP_ISR                ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060A * 4)))
+#define DANUBE_PPE32_ETOP_IER                ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060B * 4)))
+#define DANUBE_PPE32_ETOP_VPID               ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060C * 4)))
+
+
+/* ENET Register */
+#define DANUBE_PPE32_ENET_MAC_CFG            	((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0610 * 4)))
+#define DANUBE_PPE32_ENET_IG_PKTDROP          	((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0619 * 4)))
+#define DANUBE_PPE32_ENET_CoS_CFG          	((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0618 * 4)))
+
+/*********LED register definition****************/
+
+#define DANUBE_LED                      0xBE100BB0
+#define DANUBE_LED_CON0                 ((volatile u32*)(DANUBE_LED + 0x0000))
+#define DANUBE_LED_CON1                 ((volatile u32*)(DANUBE_LED + 0x0004))
+#define DANUBE_LED_CPU0                 ((volatile u32*)(DANUBE_LED + 0x0008))
+#define DANUBE_LED_CPU1                 ((volatile u32*)(DANUBE_LED + 0x000C))
+#define DANUBE_LED_AR                   ((volatile u32*)(DANUBE_LED + 0x0010))
+
+
+
+
+/***********************************************************************/
+#define DANUBE_REG32(addr)		   *((volatile u32 *)(addr))
+/***********************************************************************/
+#endif //DANUBE_H
diff --git a/package/uboot-lantiq/files/include/configs/easy50712.h b/package/uboot-lantiq/files/include/configs/easy50712.h
new file mode 100644
index 0000000..e061b83
--- /dev/null
+++ b/package/uboot-lantiq/files/include/configs/easy50712.h
@@ -0,0 +1,115 @@
+/*
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file contains the configuration parameters for the Danube reference board.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* #define DEBUG */
+
+#define CONFIG_MIPS32		1	/* MIPS32 CPU compatible		*/
+#define CONFIG_MIPS24KEC	1	/* MIPS 24KEc CPU core			*/
+#define CONFIG_DANUBE		1	/* in a Danube/Twinpass Chip		*/
+#define CONFIG_EASY50712	1	/* on the Danube Reference Board	*/
+
+#define CONFIG_SYS_MIPS_MULTI_CPU	1	/* This is a multi cpu system */
+
+#define CONFIG_SYS_MAX_RAM	32*1024*1024
+
+#define CONFIG_FLASH_CFI_DRIVER	1
+
+#define CONFIG_SYS_INIT_RAM_LOCK_MIPS
+#ifdef CONFIG_SYS_RAMBOOT
+	//#warning CONFIG_SYS_RAMBOOT
+	#define CONFIG_SKIP_LOWLEVEL_INIT
+#else /* CONFIG_SYS_RAMBOOT */
+
+	#define CONFIG_SYS_EBU_BOOT
+
+	#ifdef CONFIG_USE_DDR_RAM
+		/* FIXME: should not need these workarounds */
+		#define DANUBE_DDR_RAM_SIZE	32	/* 32M DDR-DRAM for reference board */
+	#endif
+
+	#define INFINEON_EBU_BOOTCFG	0x688C688C	/* CMULT = 8 for 150 MHz */
+
+#endif /* CONFIG_SYS_RAMBOOT */
+
+#if 1
+#ifndef	CPU_CLOCK_RATE
+#define CPU_CLOCK_RATE	(ifx_get_cpuclk())
+#endif
+#endif
+
+#define	CONFIG_SYS_PROMPT	"DANUBE => "	/* Monitor Command Prompt */
+
+#undef CONFIG_SYS_HUSH_PARSER		/* Use the HUSH parser		*/
+
+/*
+ * Include common defines/options for all Infineon boards
+ */
+#include "ifx-common.h"
+
+/*
+ * Cache Configuration (cpu/chip specific, Danube)
+ */
+#define CONFIG_SYS_DCACHE_SIZE		16384
+#define CONFIG_SYS_ICACHE_SIZE		16384
+#define CONFIG_SYS_CACHELINE_SIZE	32
+#define CONFIG_SYS_MIPS_CACHE_OPER_MODE	CONF_CM_CACHABLE_NO_WA
+
+#define CONFIG_NET_MULTI
+#if 0
+#define CONFIG_M4530_ETH
+#define CONFIG_M4530_FPGA
+#endif
+
+#define CONFIG_IFX_ETOP
+#define CLK_OUT2_25MHZ
+#define CONFIG_EXTRA_SWITCH
+
+#define CONFIG_RMII			/*  use interface in RMII mode */
+
+#define CONFIG_MII
+#define CONFIG_CMD_MII
+
+#define CONFIG_IFX_ASC
+
+#ifdef CONFIG_USE_ASC0
+#define CONFIG_SYS_IFX_ASC_BASE		0x1E100400
+#else
+#define CONFIG_SYS_IFX_ASC_BASE		0x1E100C00
+#endif
+
+#ifdef CONFIG_SYS_RAMBOOT
+/* Configuration of EBU: */
+/* starting address from 0xb0000000 */
+/* make the flash available from RAM boot */
+#	define CONFIG_EBU_ADDSEL0		0x10000031
+#	define CONFIG_EBU_BUSCON0		0x0001D7FF
+#endif
+
+#endif	/* __CONFIG_H */
diff --git a/package/uboot-lantiq/files/include/configs/ifx-common.h b/package/uboot-lantiq/files/include/configs/ifx-common.h
new file mode 100644
index 0000000..88569ad
--- /dev/null
+++ b/package/uboot-lantiq/files/include/configs/ifx-common.h
@@ -0,0 +1,192 @@
+/*
+ * (C) Copyright 2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Common configuration options for all AMCC boards
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __IFX_COMMON_H
+#define __IFX_COMMON_H
+
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+
+#define CONFIG_BAUDRATE		115200
+
+/* valid baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_TIMESTAMP		/* Print image info with timestamp */
+
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"ram_addr=0x80500000\0"						\
+	"kernel_addr=0xb0050000\0"					\
+	"mtdparts=mtdparts=ifx-nor:256k(uboot)ro,64k(uboot_env)ro,64k(kernel),-(rootfs)\0" \
+	"flashargs=setenv bootargs rootfstype=squashfs,jffs2\0"		\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath} \0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off\0"				\
+	"addmisc=setenv bootargs ${bootargs} init=/etc/preinit "	\
+		"console=ttyS1,115200 ethaddr=${ethaddr} ${mtdparts}"		\
+		"${mtdparts}\0"						\
+	"flash_flash=run flashargs addip addmisc;"			\
+		"bootm ${kernel_addr}\0"				\
+	"flash_nfs=run nfsargs addip addmisc;bootm ${kernel_addr}\0"	\
+	"net_flash=run load_kernel flashargs addip addmisc;"		\
+		"bootm ${ram_addr}\0"					\
+	"net_nfs=run load_kernel nfsargs addip addmisc;"		\
+		"bootm ${ram_addr}\0"					\
+	"load_kernel=tftp ${ram_addr} "					\
+		"${tftppath}openwrt-ifxmips-uImage\0"			\
+	"update_uboot=tftp 0x80500000 ${tftppath}u-boot.bin;era 0xb0000000 +${filesize};" \
+		"cp.b 0x80500000 0xb0000000 ${filesize}\0" \
+	"update_openwrt=tftp ${ram_addr} "				\
+		"${tftppath}openwrt-ifxmips-squashfs.image;"		\
+		"era ${kernel_addr} +${filesize};"			\
+		"cp.b ${ram_addr} ${kernel_addr} ${filesize}\0"
+
+#define CONFIG_BOOTCOMMAND	"run flash_flash"
+
+/*
+ * TFTP is using fragmented packets
+*/
+#define CONFIG_IP_DEFRAG
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_CONSOLE
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_XIMG
+
+//#define CONFIG_CMD_ASKENV
+//#define CONFIG_CMD_DHCP
+//#define CONFIG_CMD_ELF
+#define CONFIG_CMD_PING
+//#define CONFIG_CMD_JFFS2
+//#define CONFIG_CMD_SNTP
+
+
+/*
+ * Miscellaneous configurable options
+ */
+
+#define CONFIG_LZMA
+
+#define CONFIG_SYS_LONGHELP				/* undef to save memory */
+#ifndef CONFIG_SYS_PROMPT
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
+#endif
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)  /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+
+#define CONFIG_SYS_MALLOC_LEN		1024*1024
+#define CONFIG_SYS_BOOTPARAMS_LEN	128*1024
+
+#define CONFIG_SYS_MIPS_TIMER_FREQ	(CPU_CLOCK_RATE/2)
+#define CONFIG_SYS_HZ			1000
+
+#define CONFIG_SYS_SDRAM_BASE		0x80000000
+#define CONFIG_SYS_LOAD_ADDR		0x80100000	/* default load address	*/
+#define CONFIG_SYS_MEMTEST_START	0x80100000
+#define CONFIG_SYS_MEMTEST_END		0x80800000
+
+#define CONFIG_CMDLINE_EDITING		/* add command line history	*/
+#define CONFIG_AUTO_COMPLETE		/* add autocompletion support	*/
+
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE		/* include version env variable */
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup*/
+
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#endif
+
+#define CONFIG_LOADS_ECHO		/* echo on for serial download	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change	*/
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+ 
+#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT	1
+
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	(140)	/* max number of sectors on one chip */
+
+#define PHYS_FLASH_1			0xB0000000 /* Flash Bank #1 */
+#define PHYS_FLASH_2			0xB0800000 /* Flash Bank #2 */
+
+/* The following #defines are needed to get flash environment right */
+#define CONFIG_SYS_MONITOR_BASE		TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)
+
+#define CONFIG_SYS_INIT_SP_OFFSET	0x400000
+
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
+
+#define CONFIG_ENV_OVERWRITE		1
+#define CONFIG_ENV_IS_IN_FLASH		1
+
+/* Address and size of Primary Environment Sector	*/
+#define CONFIG_ENV_ADDR			0xB0040000
+#define CONFIG_ENV_SIZE			0x10000
+
+#ifdef CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_SWAP_ADDR
+#define CONFIG_FLASH_SHOW_PROGRESS	45
+
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+
+#define FLASH_FIXUP_ADDR_8(addr)	((void*)((ulong)(addr)^2))
+#define FLASH_FIXUP_ADDR_16(addr)	((void*)((ulong)(addr)^2))
+
+#endif
+
+#define CONFIG_NR_DRAM_BANKS		1
+
+#ifdef CONFIG_SYS_EBU_BOOT
+#ifndef INFINEON_EBU_BOOTCFG
+#error Please define INFINEON_EBU_BOOTCFG
+#endif
+#endif
+
+#endif /* __IFX_COMMON_H */
diff --git a/package/uboot-lantiq/gct b/package/uboot-lantiq/gct
new file mode 100755
index 0000000..4054c15
--- /dev/null
+++ b/package/uboot-lantiq/gct
@@ -0,0 +1,165 @@
+#!/usr/bin/perl 
+
+#use strict;
+#use Cwd;
+#use Env;
+
+my $aline;
+my $lineid;
+my $length;
+my $address;
+my @bytes;
+my $addstr;
+my $chsum=0;
+my $count=0;
+my $firstime=1;
+my $i;
+my $currentaddr;
+my $tmp;
+my $holder="";
+my $loadaddr;
+
+if(@ARGV < 2){
+	die("\n Syntax: ./program_SDRAM input1(memory setup) input2(*\.srec) output\n");
+}
+
+open(INFILE1, "<$ARGV[0]") || die("\ninput1 open fail\n");
+open(INFILE2, "<$ARGV[1]") || die("\ninput2 open fail\n");
+open(OUTFILE, ">$ARGV[2]") || die("\nOutput file open fail\n");
+
+$i=0;
+while ($line = <INFILE1>){
+	if($line=~/\w/){
+		if($line!~/[;#\*]/){
+			if($i eq 0){
+				printf OUTFILE ("33333333");
+			}
+			chomp($line);
+			$line=~s/\t//;
+			@array=split(/ +/,$line);
+			$j=0;
+			while(@array[$j]!~/\w/){
+				$j=$j+1;
+			}
+			$addr=@array[$j];
+			$regval=@array[$j+1];
+			$addr=~s/0x//;
+			$regval=~s/0x//;
+			printf OUTFILE ("%08x%08x",hex($addr),hex($regval));
+			$i=$i+1;
+			if($i eq 8){
+				$i=0;
+				printf OUTFILE ("\n");
+			}
+		}
+	}
+}
+
+while($i lt 8 && $i gt 0){
+	printf OUTFILE "00"x8;
+	$i=$i+1;
+}
+
+if($i eq 8){
+	printf OUTFILE ("\n");
+}
+
+while($aline=<INFILE2>){
+	$aline=uc($aline);
+	chomp($aline);
+	next if(($aline=~/^S0/) || ($aline=~/^S7/));
+	($lineid, $length, $address, @bytes) = unpack"A2A2A8"."A2"x300, $aline;
+	$length = hex($length);
+	$address = hex($address);
+	$length -=5;
+	$i=0;
+
+	while($length>0){
+		if($firstime==1){
+			$addstr = sprintf("%x", $address);
+			$addstr = "0"x(8-length($addstr)).$addstr;
+			print OUTFILE $addstr;
+			addchsum($addstr);
+			$firstime=0;
+			$currentaddr=$address;
+			$loadaddr = $addstr;
+		}
+		else{
+			if($count==64){
+				$addstr = sprintf("%x", $currentaddr);
+				$addstr = "0"x(8-length($addstr)).$addstr;
+				print OUTFILE $addstr;
+				addchsum($addstr);
+				$count=0;
+			}
+			#printf("*** %x != %x\n", $address, $currentaddr) if $address != $currentaddr;
+		}
+		if($currentaddr < $address) {
+			print OUTFILE "00";
+			addchsum("00");
+			$count++;
+			$currentaddr++;
+		}
+		else {
+			while($count<64){
+				$bytes[$i]=~tr/ABCDEF/abcdef/;
+				print OUTFILE "$bytes[$i]";
+				addchsum($bytes[$i]);
+				$i++;
+				$count++;
+				$currentaddr++;
+				$length--;
+				last if($length==0);
+			}
+		}
+		if($count==64){
+			print OUTFILE "\n";
+			#print OUTFILE "\r";
+		}
+	}
+}
+if($count != 64){
+	$tmp = "00";
+	for($i=0;$i<(64-$count);$i++){
+		print OUTFILE "00";
+		addchsum($tmp);
+	}
+	print OUTFILE "\n";
+	#print OUTFILE "\r";
+}
+
+
+print OUTFILE "11"x4;
+use integer;
+$chsum=$chsum & 0xffffffff;
+$chsum = sprintf("%X", $chsum);
+$chsum = "0"x(8-length($chsum)).$chsum;
+$chsum =~tr/ABCDEF/abcdef/;
+print OUTFILE $chsum;
+print OUTFILE "00"x60;
+print OUTFILE "\n";
+#print OUTFILE "\r";
+
+print OUTFILE "99"x4;
+print OUTFILE $loadaddr;
+print OUTFILE "00"x60;
+print OUTFILE "\n";
+#print OUTFILE "\r";
+
+
+close OUTFILE;
+#END of Program
+
+
+
+sub addchsum{
+	my $cc=$_[0];
+	$holder=$holder.$cc;
+	if(length($holder)==8){
+		$holder = hex($holder);
+		$chsum+=$holder;
+		$holder="";
+	}
+}
+#END
+
diff --git a/package/uboot-lantiq/patches/000-build-infos.patch b/package/uboot-lantiq/patches/000-build-infos.patch
new file mode 100644
index 0000000..2afcc4c
--- /dev/null
+++ b/package/uboot-lantiq/patches/000-build-infos.patch
@@ -0,0 +1,54 @@
+Add output like in linux kernel for current compiled file
+Used normaly in combination with make option -s
+
+Like in following example:
+
+$ make -s V=1
+[CC] tools/img2srec.c
+[CC] tools/bmp_logo.c
+[CC] examples/hello_world.c
+--- a/config.mk
++++ b/config.mk
+@@ -206,17 +206,42 @@ export	TEXT_BASE PLATFORM_CPPFLAGS PLATF
+ 
+ #########################################################################
+ 
++ifndef KBUILD_VERBOSE
++  KBUILD_VERBOSE:=0
++endif
++ifeq ("$(origin V)", "command line")
++  KBUILD_VERBOSE:=$(V)
++endif
++ifeq (,$(findstring s,$(MAKEFLAGS)))
++  KBUILD_VERBOSE:=0
++endif
++
++ifneq ($(KBUILD_VERBOSE),0)
++  define MESSAGE
++    @printf " %s %s/%s\n" $(1) $(2) $(3)
++  endef
++else
++  define MESSAGE
++  endef
++endif
++
+ # Allow boards to use custom optimize flags on a per dir/file basis
+ BCURDIR := $(notdir $(CURDIR))
++
+ $(obj)%.s:	%.S
++	$(call MESSAGE, [CPP],$(subst $(SRCTREE)/,,$(CURDIR)),$<)
+ 	$(CPP) $(AFLAGS) $(AFLAGS_$(@F)) $(AFLAGS_$(BCURDIR)) -o $@ $<
+ $(obj)%.o:	%.S
++	$(call MESSAGE, [AS], $(subst $(SRCTREE)/,,$(CURDIR)),$<)
+ 	$(CC)  $(AFLAGS) $(AFLAGS_$(@F)) $(AFLAGS_$(BCURDIR)) -o $@ $< -c
+ $(obj)%.o:	%.c
++	$(call MESSAGE, [CC], $(subst $(SRCTREE)/,,$(CURDIR)),$<)
+ 	$(CC)  $(CFLAGS) $(CFLAGS_$(@F)) $(CFLAGS_$(BCURDIR)) -o $@ $< -c
+ $(obj)%.i:	%.c
++	$(call MESSAGE, [CPP],$(subst $(SRCTREE)/,,$(CURDIR)),$<)
+ 	$(CPP) $(CFLAGS) $(CFLAGS_$(@F)) $(CFLAGS_$(BCURDIR)) -o $@ $< -c
+ $(obj)%.s:	%.c
++	$(call MESSAGE, [CC], $(subst $(SRCTREE)/,,$(CURDIR)),$<)
+ 	$(CC)  $(CFLAGS) $(CFLAGS_$(@F)) $(CFLAGS_$(BCURDIR)) -o $@ $< -c -S
+ 
+ #########################################################################
diff --git a/package/uboot-lantiq/patches/010-fix-mips-flags.patch b/package/uboot-lantiq/patches/010-fix-mips-flags.patch
new file mode 100644
index 0000000..4c706a7
--- /dev/null
+++ b/package/uboot-lantiq/patches/010-fix-mips-flags.patch
@@ -0,0 +1,23 @@
+--- a/cpu/mips/config.mk
++++ b/cpu/mips/config.mk
+@@ -23,16 +23,18 @@
+ v=$(shell $(AS) --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' | cut -d. -f2)
+ MIPSFLAGS:=$(shell \
+ if [ "$v" -lt "14" ]; then \
+-	echo "-mcpu=4kc"; \
++	echo "-mcpu=mips32"; \
+ else \
+-	echo "-march=4kc -mtune=4kc"; \
++	echo "-mips32 -march=mips32 -mtune=mips32"; \
+ fi)
+ 
++ifndef ENDIANNESS
+ ifneq (,$(findstring 4KCle,$(CROSS_COMPILE)))
+ ENDIANNESS = -EL
+ else
+ ENDIANNESS = -EB
+ endif
++endif
+ 
+ MIPSFLAGS += $(ENDIANNESS)
+ 
diff --git a/package/uboot-lantiq/patches/050-mips-enhancements.patch b/package/uboot-lantiq/patches/050-mips-enhancements.patch
new file mode 100644
index 0000000..d056467
--- /dev/null
+++ b/package/uboot-lantiq/patches/050-mips-enhancements.patch
@@ -0,0 +1,124 @@
+--- a/cpu/mips/start.S
++++ b/cpu/mips/start.S
+@@ -69,6 +69,9 @@ _start:
+ #elif defined(CONFIG_PURPLE)
+ 	.word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */
+ 	.word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */
++#elif defined(CONFIG_SYS_EBU_BOOT)
++	.word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */
++	.word 0x00000000           /* phase of the flash                    */
+ #else
+ 	RVECENT(romReserved,2)
+ #endif
+@@ -202,7 +205,25 @@ _start:
+ 	 * 128 * 8 == 1024 == 0x400
+ 	 * so this is address R_VEC+0x400 == 0xbfc00400
+ 	 */
+-#ifdef CONFIG_PURPLE
++#ifndef CONFIG_PURPLE
++	XVECENT(romExcHandle,0x400);	/* bfc00400: Int, CauseIV=1 */
++	RVECENT(romReserved,129);
++	RVECENT(romReserved,130);
++	RVECENT(romReserved,131);
++	RVECENT(romReserved,132);
++	RVECENT(romReserved,133);
++	RVECENT(romReserved,134);
++	RVECENT(romReserved,135);
++	RVECENT(romReserved,136);
++	RVECENT(romReserved,137);
++	RVECENT(romReserved,138);
++	RVECENT(romReserved,139);
++	RVECENT(romReserved,140);
++	RVECENT(romReserved,141);
++	RVECENT(romReserved,142);
++	RVECENT(romReserved,143);
++	XVECENT(romExcHandle,0x480);	/* bfc00480: EJTAG debug exception */
++#else /* CONFIG_PURPLE */
+ /* 0xbfc00400 */
+ 	.word	0xdc870000
+ 	.word	0xfca70000
+@@ -228,6 +249,12 @@ _start:
+ #endif /* CONFIG_PURPLE */
+ 	.align 4
+ reset:
++#ifdef CONFIG_SYS_MIPS_MULTI_CPU
++	mfc0	k0, CP0_EBASE
++	and	k0, EBASEF_CPUNUM
++	bne	k0, zero, ifx_mips_handler_cpux
++	nop
++#endif
+ 
+ 	/* Clear watch registers.
+ 	 */
+@@ -239,6 +266,16 @@ reset:
+ 
+ 	setup_c0_status_reset
+ 
++#if defined(CONFIG_MIPS24KEC) || defined(CONFIG_MIPS34KC)
++	/* CONFIG7 register */
++	/* Erratum "RPS May Cause Incorrect Instruction Execution"
++	 * for 24KEC and 34KC */
++	mfc0	k0, CP0_CONFIG, 7
++	li	k1, MIPS_CONF7_RPS
++	or	k0, k1
++	mtc0	k0, CP0_CONFIG, 7
++#endif
++
+ 	/* Init Timer */
+ 	mtc0	zero, CP0_COUNT
+ 	mtc0	zero, CP0_COMPARE
+@@ -270,9 +307,12 @@ reset:
+ 	jalr	t9
+ 	nop
+ 
++#ifndef CONFIG_SYS_MIPS_CACHE_OPER_MODE
++#define CONFIG_SYS_MIPS_CACHE_OPER_MODE CONF_CM_CACHABLE_NONCOHERENT
++#endif
+ 	/* ... and enable them.
+ 	 */
+-	li	t0, CONF_CM_CACHABLE_NONCOHERENT
++	li	t0, CONFIG_SYS_MIPS_CACHE_OPER_MODE
+ 	mtc0	t0, CP0_CONFIG
+ #endif /* !CONFIG_SKIP_LOWLEVEL_INIT */
+ 
+@@ -419,3 +459,15 @@ romReserved:
+ 
+ romExcHandle:
+ 	b	romExcHandle
++
++	/* Additional handlers.
++	 */
++#ifdef CONFIG_SYS_MIPS_MULTI_CPU
++/*
++ * Stop Slave CPUs
++ */
++ifx_mips_handler_cpux:
++	wait;
++	b ifx_mips_handler_cpux;
++	nop;
++#endif
+--- a/include/asm-mips/mipsregs.h
++++ b/include/asm-mips/mipsregs.h
+@@ -57,6 +57,7 @@
+ #define CP0_CAUSE $13
+ #define CP0_EPC $14
+ #define CP0_PRID $15
++#define CP0_EBASE $15,1
+ #define CP0_CONFIG $16
+ #define CP0_LLADDR $17
+ #define CP0_WATCHLO $18
+@@ -395,6 +396,14 @@
+ #define  CAUSEF_BD		(_ULCAST_(1)   << 31)
+ 
+ /*
++ * Bits in the coprocessor 0 EBase register
++ */
++#define EBASEB_CPUNUM		0
++#define EBASEF_CPUNUM		(0x3ff << EBASEB_CPUNUM)
++#define EBASEB_EXPBASE		12
++#define EBASEF_EXPBASE		(0x3ffff << EBASEB_EXPBASE)
++
++/*
+  * Bits in the coprocessor 0 config register.
+  */
+ /* Generic bits.  */
diff --git a/package/uboot-lantiq/patches/062-cfi-addr-fixup.patch b/package/uboot-lantiq/patches/062-cfi-addr-fixup.patch
new file mode 100644
index 0000000..8f95da1
--- /dev/null
+++ b/package/uboot-lantiq/patches/062-cfi-addr-fixup.patch
@@ -0,0 +1,225 @@
+--- a/drivers/mtd/cfi_flash.c
++++ b/drivers/mtd/cfi_flash.c
+@@ -85,6 +85,22 @@ flash_info_t flash_info[CFI_MAX_FLASH_BA
+ #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
+ #endif
+ 
++/*
++ * Check if address fixup macros are defined, define defaults otherwise
++ */
++#ifndef FLASH_FIXUP_ADDR_8
++#define FLASH_FIXUP_ADDR_8(addr)	(addr)
++#endif
++#ifndef FLASH_FIXUP_ADDR_16
++#define FLASH_FIXUP_ADDR_16(addr)	(addr)
++#endif
++#ifndef FLASH_FIXUP_ADDR_32
++#define FLASH_FIXUP_ADDR_32(addr)	(addr)
++#endif
++#ifndef FLASH_FIXUP_ADDR_64
++#define FLASH_FIXUP_ADDR_64(addr)	(addr)
++#endif
++
+ static void __flash_write8(u8 value, void *addr)
+ {
+ 	__raw_writeb(value, addr);
+@@ -264,9 +280,9 @@ static inline uchar flash_read_uchar (fl
+ 
+ 	cp = flash_map (info, 0, offset);
+ #if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
+-	retval = flash_read8(cp);
++	retval = flash_read8(FLASH_FIXUP_ADDR_8(cp));
+ #else
+-	retval = flash_read8(cp + info->portwidth - 1);
++	retval = flash_read8(FLASH_FIXUP_ADDR_8(cp) + info->portwidth - 1);
+ #endif
+ 	flash_unmap (info, 0, offset, cp);
+ 	return retval;
+@@ -280,7 +296,7 @@ static inline ushort flash_read_word (fl
+ 	ushort *addr, retval;
+ 
+ 	addr = flash_map (info, 0, offset);
+-	retval = flash_read16 (addr);
++	retval = flash_read16 (FLASH_FIXUP_ADDR_16(addr));
+ 	flash_unmap (info, 0, offset, addr);
+ 	return retval;
+ }
+@@ -305,19 +321,28 @@ static ulong flash_read_long (flash_info
+ 	debug ("long addr is at %p info->portwidth = %d\n", addr,
+ 	       info->portwidth);
+ 	for (x = 0; x < 4 * info->portwidth; x++) {
+-		debug ("addr[%x] = 0x%x\n", x, flash_read8(addr + x));
++		debug ("addr[%x] = 0x%x\n", x,
++			flash_read8(FLASH_FIXUP_ADDR_32(addr) + x));
+ 	}
+ #endif
+ #if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
+-	retval = ((flash_read8(addr) << 16) |
+-		  (flash_read8(addr + info->portwidth) << 24) |
+-		  (flash_read8(addr + 2 * info->portwidth)) |
+-		  (flash_read8(addr + 3 * info->portwidth) << 8));
++	retval = ((flash_read8(FLASH_FIXUP_ADDR_8
++			      (addr) << 16) |
++		  (flash_read8(FLASH_FIXUP_ADDR_8
++			      (addr + info->portwidth)) << 24) |
++		  (flash_read8(FLASH_FIXUP_ADDR_8
++			      (addr + 2 * info->portwidth))) |
++		  (flash_read8(FLASH_FIXUP_ADDR_8
++			      (addr + 3 * info->portwidth)) << 8));
+ #else
+-	retval = ((flash_read8(addr + 2 * info->portwidth - 1) << 24) |
+-		  (flash_read8(addr + info->portwidth - 1) << 16) |
+-		  (flash_read8(addr + 4 * info->portwidth - 1) << 8) |
+-		  (flash_read8(addr + 3 * info->portwidth - 1)));
++	retval = ((flash_read8(FLASH_FIXUP_ADDR_8
++			      (addr + 2 * info->portwidth - 1)) << 24) |
++		  (flash_read8(FLASH_FIXUP_ADDR_8
++			      (addr + info->portwidth - 1)) << 16) |
++		  (flash_read8(FLASH_FIXUP_ADDR_8
++			      (addr + 4 * info->portwidth - 1)) << 8) |
++		  (flash_read8(FLASH_FIXUP_ADDR_8
++			      (addr + 3 * info->portwidth - 1))));
+ #endif
+ 	flash_unmap(info, sect, offset, addr);
+ 
+@@ -338,21 +363,22 @@ void flash_write_cmd (flash_info_t * inf
+ 	flash_make_cmd (info, cmd, &cword);
+ 	switch (info->portwidth) {
+ 	case FLASH_CFI_8BIT:
+-		debug ("fwc addr %p cmd %x %x 8bit x %d bit\n", addr, cmd,
+-		       cword.c, info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+-		flash_write8(cword.c, addr);
++		debug ("fwc addr %p cmd %x %x 8bit x %d bit\n",
++		       FLASH_FIXUP_ADDR_8(addr), cmd, cword.c,
++		       info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
++		flash_write8(cword.c, FLASH_FIXUP_ADDR_8(addr));
+ 		break;
+ 	case FLASH_CFI_16BIT:
+-		debug ("fwc addr %p cmd %x %4.4x 16bit x %d bit\n", addr,
+-		       cmd, cword.w,
++		debug ("fwc addr %p cmd %x %4.4x 16bit x %d bit\n",
++		       FLASH_FIXUP_ADDR_16(addr), cmd, cword.w,
+ 		       info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+-		flash_write16(cword.w, addr);
++		flash_write16(cword.w, FLASH_FIXUP_ADDR_16(addr));
+ 		break;
+ 	case FLASH_CFI_32BIT:
+-		debug ("fwc addr %p cmd %x %8.8lx 32bit x %d bit\n", addr,
+-		       cmd, cword.l,
++		debug ("fwc addr %p cmd %x %8.8lx 32bit x %d bit\n",
++		       FLASH_FIXUP_ADDR_32(addr), cmd, cword.l,
+ 		       info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+-		flash_write32(cword.l, addr);
++		flash_write32(cword.l, FLASH_FIXUP_ADDR_32(addr));
+ 		break;
+ 	case FLASH_CFI_64BIT:
+ #ifdef DEBUG
+@@ -362,11 +388,11 @@ void flash_write_cmd (flash_info_t * inf
+ 			print_longlong (str, cword.ll);
+ 
+ 			debug ("fwrite addr %p cmd %x %s 64 bit x %d bit\n",
+-			       addr, cmd, str,
++			       FLASH_FIXUP_ADDR_64(addr), cmd, str,
+ 			       info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+ 		}
+ #endif
+-		flash_write64(cword.ll, addr);
++		flash_write64(cword.ll, FLASH_FIXUP_ADDR_64(addr));
+ 		break;
+ 	}
+ 
+@@ -397,16 +423,19 @@ static int flash_isequal (flash_info_t *
+ 	debug ("is= cmd %x(%c) addr %p ", cmd, cmd, addr);
+ 	switch (info->portwidth) {
+ 	case FLASH_CFI_8BIT:
+-		debug ("is= %x %x\n", flash_read8(addr), cword.c);
+-		retval = (flash_read8(addr) == cword.c);
++		debug ("is= %x %x\n",
++		       flash_read8(FLASH_FIXUP_ADDR_8(addr)), cword.c);
++		retval = (flash_read8(FLASH_FIXUP_ADDR_8(addr)) == cword.c);
+ 		break;
+ 	case FLASH_CFI_16BIT:
+-		debug ("is= %4.4x %4.4x\n", flash_read16(addr), cword.w);
+-		retval = (flash_read16(addr) == cword.w);
++		debug ("is= %4.4x %4.4x\n",
++		       flash_read16(FLASH_FIXUP_ADDR_16(addr)), cword.w);
++		retval = (flash_read16(FLASH_FIXUP_ADDR_16(addr)) == cword.w);
+ 		break;
+ 	case FLASH_CFI_32BIT:
+-		debug ("is= %8.8x %8.8lx\n", flash_read32(addr), cword.l);
+-		retval = (flash_read32(addr) == cword.l);
++		debug ("is= %8.8x %8.8lx\n",
++		       flash_read32(FLASH_FIXUP_ADDR_32(addr)), cword.l);
++		retval = (flash_read32(FLASH_FIXUP_ADDR_32(addr)) == cword.l);
+ 		break;
+ 	case FLASH_CFI_64BIT:
+ #ifdef DEBUG
+@@ -414,12 +443,13 @@ static int flash_isequal (flash_info_t *
+ 			char str1[20];
+ 			char str2[20];
+ 
+-			print_longlong (str1, flash_read64(addr));
++			print_longlong (str1, flash_read64(FLASH_FIXUP_ADDR_64
++							  (addr)));
+ 			print_longlong (str2, cword.ll);
+ 			debug ("is= %s %s\n", str1, str2);
+ 		}
+ #endif
+-		retval = (flash_read64(addr) == cword.ll);
++		retval = (flash_read64(FLASH_FIXUP_ADDR_64(addr)) == cword.ll);
+ 		break;
+ 	default:
+ 		retval = 0;
+@@ -443,16 +473,20 @@ static int flash_isset (flash_info_t * i
+ 	flash_make_cmd (info, cmd, &cword);
+ 	switch (info->portwidth) {
+ 	case FLASH_CFI_8BIT:
+-		retval = ((flash_read8(addr) & cword.c) == cword.c);
++		retval = ((flash_read8(FLASH_FIXUP_ADDR_8(addr))
++			    & cword.c) == cword.c);
+ 		break;
+ 	case FLASH_CFI_16BIT:
+-		retval = ((flash_read16(addr) & cword.w) == cword.w);
++		retval = ((flash_read16(FLASH_FIXUP_ADDR_16(addr))
++			    & cword.w) == cword.w);
+ 		break;
+ 	case FLASH_CFI_32BIT:
+-		retval = ((flash_read32(addr) & cword.l) == cword.l);
++		retval = ((flash_read32(FLASH_FIXUP_ADDR_32(addr))
++			    & cword.l) == cword.l);
+ 		break;
+ 	case FLASH_CFI_64BIT:
+-		retval = ((flash_read64(addr) & cword.ll) == cword.ll);
++		retval = ((flash_read64(FLASH_FIXUP_ADDR_64(addr))
++			    & cword.ll) == cword.ll);
+ 		break;
+ 	default:
+ 		retval = 0;
+@@ -476,17 +510,22 @@ static int flash_toggle (flash_info_t * 
+ 	flash_make_cmd (info, cmd, &cword);
+ 	switch (info->portwidth) {
+ 	case FLASH_CFI_8BIT:
+-		retval = flash_read8(addr) != flash_read8(addr);
++		retval = flash_read8(FLASH_FIXUP_ADDR_8(addr)) !=
++			 flash_read8(FLASH_FIXUP_ADDR_8(addr));
+ 		break;
+ 	case FLASH_CFI_16BIT:
+-		retval = flash_read16(addr) != flash_read16(addr);
++		retval = flash_read16(FLASH_FIXUP_ADDR_16(addr)) !=
++			 flash_read16(FLASH_FIXUP_ADDR_16(addr));
+ 		break;
+ 	case FLASH_CFI_32BIT:
+-		retval = flash_read32(addr) != flash_read32(addr);
++		retval = flash_read32(FLASH_FIXUP_ADDR_32(addr)) !=
++			 flash_read32(FLASH_FIXUP_ADDR_32(addr));
+ 		break;
+ 	case FLASH_CFI_64BIT:
+-		retval = ( (flash_read32( addr ) != flash_read32( addr )) ||
+-			   (flash_read32(addr+4) != flash_read32(addr+4)) );
++		retval = ( (flash_read32(FLASH_FIXUP_ADDR_64( addr )) !=
++			    flash_read32(FLASH_FIXUP_ADDR_64( addr ))) ||
++			   (flash_read32(FLASH_FIXUP_ADDR_64(addr+4)) !=
++			    flash_read32(FLASH_FIXUP_ADDR_64(addr+4))) );
+ 		break;
+ 	default:
+ 		retval = 0;
diff --git a/package/uboot-lantiq/patches/100-ifx_targets.patch b/package/uboot-lantiq/patches/100-ifx_targets.patch
new file mode 100644
index 0000000..9c313e0
--- /dev/null
+++ b/package/uboot-lantiq/patches/100-ifx_targets.patch
@@ -0,0 +1,112 @@
+--- a/MAKEALL
++++ b/MAKEALL
+@@ -709,6 +709,12 @@ LIST_arm="			\
+ ## MIPS Systems		(default = big endian)
+ #########################################################################
+ 
++LIST_ifxcpe="		\
++	easy50712	\
++	easy50712_DDR166M	\
++	easy50712_DDR166M_ramboot	\
++"
++
+ LIST_mips4kc="		\
+ 	incaip		\
+ 	qemu_mips	\
+@@ -740,6 +746,7 @@ LIST_au1xx0="		\
+ "
+ 
+ LIST_mips="		\
++	${LIST_ifxcpe}	\
+ 	${LIST_mips4kc}	\
+ 	${LIST_mips5kc}	\
+ 	${LIST_au1xx0}	\
+--- a/Makefile
++++ b/Makefile
+@@ -474,7 +475,7 @@ $(obj)include/autoconf.mk: $(obj)include
+ 	set -e ; \
+ 	: Extract the config macros ; \
+ 	$(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
+-		sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
++		sed -n -f tools/scripts/define2mk.sed |sort > $@.tmp && \
+ 	mv $@.tmp $@
+ 
+ #########################################################################
+@@ -3354,7 +3355,7 @@ incaip_config: unconfig
+ 		{ echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \
+ 		  $(XECHO) "... with 150MHz system clock" ; \
+ 		}
+-	@$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip
++	@$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip infineon
+ 
+ tb0229_config: unconfig
+ 	@$(MKCONFIG) $(@:_config=) mips mips tb0229
+@@ -3395,6 +3396,30 @@ vct_platinumavc_onenand_small_config: un
+ 	@$(MKCONFIG) -a vct mips mips vct micronas
+ 
+ #########################################################################
++## MIPS32 ifxcpe
++#########################################################################
++
++easy50712%config	: unconfig
++	@mkdir -p $(obj)include
++	@mkdir -p $(obj)board/infineon/easy50712
++	@[ -z "$(findstring ramboot,$@)" ] || \
++		{ echo "TEXT_BASE = 0xA0400000" >$(obj)board/infineon/easy50712/config.tmp ; \
++			echo "#define CONFIG_SYS_RAMBOOT" >>$(obj)include/config.h ; \
++			$(XECHO) "... with ramboot configuration" ; \
++		}
++	@if [ "$(findstring _DDR,$@)" ] ; then \
++		echo "#define CONFIG_USE_DDR_RAM"  >>$(obj)include/config.h ; \
++		DDR=$(subst DDR,,$(filter DDR%,$(subst _, ,$@))); \
++		case "$${DDR}" in \
++		111M|166M|e111M|e166M|promos400|samsung166|psc166) \
++			$(XECHO) "... with DDR RAM config $${DDR}" ; \
++			echo "#define CONFIG_USE_DDR_RAM_CFG_$${DDR}" >>$(obj)include/config.h ;; \
++		*)	$(XECHO) "... DDR RAM config \\\"$${DDR}\\\" unknown, use default"; \
++		esac; \
++	fi
++	@$(MKCONFIG) -a $(word 1,$(subst _, ,$@)) mips mips easy50712 infineon danube
++
++#########################################################################
+ ## MIPS32 AU1X00
+ #########################################################################
+ 
+--- a/drivers/serial/Makefile
++++ b/drivers/serial/Makefile
+@@ -28,6 +28,7 @@ LIB	:= $(obj)libserial.a
+ COBJS-$(CONFIG_ARM_DCC) += arm_dcc.o
+ COBJS-$(CONFIG_AT91RM9200_USART) += at91rm9200_usart.o
+ COBJS-$(CONFIG_ATMEL_USART) += atmel_usart.o
++COBJS-$(CONFIG_IFX_ASC) += ifx_asc.o
+ COBJS-$(CONFIG_MCFUART) += mcfuart.o
+ COBJS-$(CONFIG_NS9750_UART) += ns9750_serial.o
+ COBJS-$(CONFIG_SYS_NS16550) += ns16550.o
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -41,6 +41,7 @@ COBJS-$(CONFIG_FEC_MXC) += fec_mxc.o
+ COBJS-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o
+ COBJS-$(CONFIG_FTMAC100) += ftmac100.o
+ COBJS-$(CONFIG_GRETH) += greth.o
++COBJS-$(CONFIG_IFX_ETOP) += ifx_etop.o
+ COBJS-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o
+ COBJS-$(CONFIG_KIRKWOOD_EGIGA) += kirkwood_egiga.o
+ COBJS-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o
+--- a/include/netdev.h
++++ b/include/netdev.h
+@@ -55,6 +55,7 @@ int fecmxc_initialize (bd_t *bis);
+ int ftmac100_initialize(bd_t *bits);
+ int greth_initialize(bd_t *bis);
+ void gt6426x_eth_initialize(bd_t *bis);
++int ifx_etop_initialize(bd_t *bis);
+ int inca_switch_initialize(bd_t *bis);
+ int kirkwood_egiga_initialize(bd_t *bis);
+ int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
+@@ -82,6 +83,7 @@ int uec_standard_init(bd_t *bis);
+ int uli526x_initialize(bd_t *bis);
+ int sh_eth_initialize(bd_t *bis);
+ int dm9000_initialize(bd_t *bis);
++int lq_eth_initialize(bd_t * bis);
+ 
+ /* Boards with PCI network controllers can call this from their board_eth_init()
+  * function to initialize whatever's on board.
diff --git a/package/uboot-lantiq/patches/200-portability.patch b/package/uboot-lantiq/patches/200-portability.patch
new file mode 100644
index 0000000..ae38ad6
--- /dev/null
+++ b/package/uboot-lantiq/patches/200-portability.patch
@@ -0,0 +1,31 @@
+--- a/tools/kwbimage.c
++++ b/tools/kwbimage.c
+@@ -206,6 +206,28 @@ INVL_DATA:
+ 	exit (EXIT_FAILURE);
+ }
+ 
++#ifndef __GLIBC__
++static ssize_t
++getline(char **line, size_t *len, FILE *fd)
++{
++	char *tmp;
++	int tmplen;
++
++	tmp = fgetln(fd, &tmplen);
++	if (!tmp)
++		return -1;
++
++	if (!*line || tmplen > *len) {
++		*len = tmplen + 1;
++		*line = realloc(*line, *len);
++	}
++
++	strncpy(*line, tmp, tmplen);
++	line[tmplen] = 0;
++	return tmplen;
++}
++#endif
++
+ /*
+  * this function sets the kwbimage header by-
+  * 	1. Abstracting input command line arguments data