uboot-omap35xx: Add uboot package for omap35xx platform

SVN-Revision: 25337

2 files changed, 405 insertions, 0 deletions

diff --git a/package/uboot-omap35xx/Makefile b/package/uboot-omap35xx/Makefile
new file mode 100644
index 0000000..928acc7
--- /dev/null
+++ b/package/uboot-omap35xx/Makefile
@@ -0,0 +1,89 @@
+#
+# Copyright (C) 2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=u-boot
+PKG_VERSION:=2010.12
+PKG_RELEASE:=1
+
+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
+PKG_SOURCE_URL:=ftp://ftp.denx.de/pub/u-boot
+PKG_MD5SUM:=
+PKG_TARGETS:=bin
+
+include $(INCLUDE_DIR)/package.mk
+
+define uboot/Default
+  TITLE:=
+  CONFIG:=
+  IMAGE:=
+endef
+
+define uboot/omap3_overo
+  TITLE:=U-boot for the gumstix board
+endef
+
+UBOOTS:=omap3_overo
+
+define Package/uboot/template
+define Package/uboot-omap35xx-$(1)
+  SECTION:=boot
+  CATEGORY:=Boot Loaders
+  DEPENDS:=@TARGET_omap35xx
+  TITLE:=$(2)
+  URL:=http://www.denx.de/wiki/U-Boot
+  VARIANT:=$(1)
+endef
+endef
+
+define BuildUbootPackage
+	$(eval $(uboot/Default))
+	$(eval $(uboot/$(1)))
+	$(call Package/uboot/template,$(1),$(TITLE))
+endef
+
+
+ifdef BUILD_VARIANT
+$(eval $(call uboot/$(BUILD_VARIANT)))
+UBOOT_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT))
+UBOOT_IMAGE:=$(if $(IMAGE),$(IMAGE),openwrt-$(BOARD)-$(BUILD_VARIANT)-u-boot.bin)
+endif
+
+define Build/Prepare
+	$(call Build/Prepare/Default)
+	$(CP) ./files/* $(PKG_BUILD_DIR)
+	find $(PKG_BUILD_DIR) -name .svn | $(XARGS) rm -rf
+endef
+
+define Build/Configure
+	$(MAKE) -C $(PKG_BUILD_DIR) \
+		$(UBOOT_CONFIG)_config
+endef
+
+define Build/Compile
+	$(MAKE) -C $(PKG_BUILD_DIR) \
+		CROSS_COMPILE=$(TARGET_CROSS)
+endef
+
+define Package/uboot/install/template
+define Package/uboot-omap35xx-$(1)/install
+	$(INSTALL_DIR) $$(1)
+	$(CP) $(PKG_BUILD_DIR)/u-boot.bin $(BIN_DIR)/$(2)
+endef
+endef
+
+$(foreach u,$(UBOOTS), \
+	$(eval $(call Package/uboot/install/template,$(u),openwrt-$(BOARD)-$(u)-u-boot.bin)) \
+)
+
+$(foreach u,$(UBOOTS), \
+	$(eval $(call BuildUbootPackage,$(u))) \
+	$(eval $(call BuildPackage,uboot-omap35xx-$(u))) \
+)
diff --git a/package/uboot-omap35xx/files/include/configs/omap3_overo.h b/package/uboot-omap35xx/files/include/configs/omap3_overo.h
new file mode 100644
index 0000000..1faafc5
--- /dev/null
+++ b/package/uboot-omap35xx/files/include/configs/omap3_overo.h
@@ -0,0 +1,316 @@
+/*
+ * Configuration settings for the Gumstix Overo board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
+#define CONFIG_OMAP		1	/* in a TI OMAP core */
+#define CONFIG_OMAP34XX		1	/* which is a 34XX */
+#define CONFIG_OMAP3430		1	/* which is in a 3430 */
+#define CONFIG_OMAP3_OVERO	1	/* working with overo */
+
+#define CONFIG_SDRC	/* The chip has SDRC controller */
+
+#include <asm/arch/cpu.h>	/* get chip and board defs */
+#include <asm/arch/omap3.h>
+
+/*
+ * Display CPU and Board information
+ */
+#define CONFIG_DISPLAY_CPUINFO		1
+#define CONFIG_DISPLAY_BOARDINFO	1
+
+/* Clock Defines */
+#define V_OSCK			26000000	/* Clock output from T2 */
+#define V_SCLK			(V_OSCK >> 1)
+
+#undef CONFIG_USE_IRQ		/* no support for IRQs */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+#define CONFIG_REVISION_TAG		1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
+						/* Sector */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
+						/* initial data */
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * NS16550 Configuration
+ */
+#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_CONS_INDEX		3
+#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
+#define CONFIG_SERIAL3			3
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600, \
+					115200}
+#define CONFIG_GENERIC_MMC		1
+#define CONFIG_MMC			1
+#define CONFIG_OMAP_HSMMC		1
+#define CONFIG_DOS_PARTITION		1
+
+/* DDR - I use Micron DDR */
+#define CONFIG_OMAP3_MICRON_DDR		1
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
+#define CONFIG_CMD_FAT		/* FAT support			*/
+#define CONFIG_CMD_JFFS2	/* JFFS2 Support		*/
+
+#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
+#define CONFIG_CMD_MMC		/* MMC support			*/
+#define CONFIG_CMD_NAND		/* NAND support			*/
+
+#undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
+#undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
+#undef CONFIG_CMD_IMI		/* iminfo			*/
+#undef CONFIG_CMD_IMLS		/* List all found images	*/
+#undef CONFIG_CMD_NFS		/* NFS support			*/
+#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_HARD_I2C			1
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_SLAVE		1
+#define CONFIG_SYS_I2C_BUS		0
+#define CONFIG_SYS_I2C_BUS_SELECT	1
+#define CONFIG_I2C_MULTI_BUS		1
+#define CONFIG_DRIVER_OMAP34XX_I2C	1
+
+/*
+ * TWL4030
+ */
+#define CONFIG_TWL4030_POWER		1
+#define CONFIG_TWL4030_LED		1
+
+/*
+ * Board NAND Info.
+ */
+#define CONFIG_SYS_NAND_QUIET_TEST	1
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
+							/* to access nand */
+#define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
+							/* to access nand */
+							/* at CS0 */
+#define GPMC_NAND_ECC_LP_x16_LAYOUT	1
+
+#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND */
+						/* devices */
+#define CONFIG_JFFS2_NAND
+/* nand device jffs2 lives on */
+#define CONFIG_JFFS2_DEV		"nand0"
+/* start of jffs2 partition */
+#define CONFIG_JFFS2_PART_OFFSET	0x680000
+#define CONFIG_JFFS2_PART_SIZE		0xf980000	/* size of jffs2 */
+							/* partition */
+
+/* Environment information */
+#define CONFIG_BOOTDELAY		5
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"loadaddr=0x82000000\0" \
+	"console=ttyS2,115200n8\0" \
+	"mpurate=500\0" \
+	"vram=12M\0" \
+	"dvimode=1024x768MR-16@60\0" \
+	"defaultdisplay=dvi\0" \
+	"mmcdev=0\0" \
+	"mmcroot=/dev/mmcblk0p2 rw\0" \
+	"mmcrootfstype=ext3 rootwait\0" \
+	"nandroot='ubi0:rootfs ubi.mtd=4'\0" \
+	"nandrootfstype=ubifs\0" \
+	"mmcargs=setenv bootargs console=${console} " \
+		"mpurate=${mpurate} " \
+		"vram=${vram} " \
+		"omapfb.mode=dvi:${dvimode} " \
+		"omapfb.debug=y " \
+		"omapdss.def_disp=${defaultdisplay} " \
+		"root=${mmcroot} " \
+		"rootfstype=${mmcrootfstype}\0" \
+	"nandargs=setenv bootargs console=${console} " \
+		"mpurate=${mpurate} " \
+		"vram=${vram} " \
+		"omapfb.mode=dvi:${dvimode} " \
+		"omapfb.debug=y " \
+		"omapdss.def_disp=${defaultdisplay} " \
+		"root=${nandroot} " \
+		"rootfstype=${nandrootfstype}\0" \
+	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+	"bootscript=echo Running bootscript from mmc ...; " \
+		"source ${loadaddr}\0" \
+	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"bootm ${loadaddr}\0" \
+	"nandboot=echo Booting from nand ...; " \
+		"run nandargs; " \
+		"nand read ${loadaddr} 280000 400000; " \
+		"bootm ${loadaddr}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+	"if mmc rescan ${mmcdev}; then " \
+		"if run loadbootscript; then " \
+			"run bootscript; " \
+		"else " \
+			"if run loaduimage; then " \
+				"run mmcboot; " \
+			"else run nandboot; " \
+			"fi; " \
+		"fi; " \
+	"else run nandboot; fi"
+
+#define CONFIG_AUTO_COMPLETE	1
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT		"Overo # "
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16	/* max number of command */
+						/* args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
+#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
+					0x01F00000) /* 31MB */
+
+#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0) /* default load */
+								/* address */
+/*
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
+#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ			1000
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128 << 10)	/* regular stack 128 KiB */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4 << 10)	/* IRQ stack 4 KiB */
+#define CONFIG_STACKSIZE_FIQ	(4 << 10)	/* FIQ stack 4 KiB */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
+#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
+#define PHYS_SDRAM_1_SIZE	(32 << 20)	/* at least 32 MiB */
+#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
+
+/* SDRAM Bank Allocation method */
+#define SDRC_R_B_C		1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+/* **** PISMO SUPPORT *** */
+
+/* Configure the PISMO */
+#define PISMO1_NAND_SIZE		GPMC_SIZE_128M
+#define PISMO1_ONEN_SIZE		GPMC_SIZE_128M
+
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
+
+#define CONFIG_SYS_FLASH_BASE		boot_flash_base
+
+/* Monitor at start of flash */
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
+
+#define CONFIG_ENV_IS_IN_NAND		1
+#define ONENAND_ENV_OFFSET		0x240000 /* environment starts here */
+#define SMNAND_ENV_OFFSET		0x240000 /* environment starts here */
+
+#define CONFIG_SYS_ENV_SECT_SIZE	boot_flash_sec
+#define CONFIG_ENV_OFFSET		boot_flash_off
+#define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
+
+#ifndef __ASSEMBLY__
+extern unsigned int boot_flash_base;
+extern volatile unsigned int boot_flash_env_addr;
+extern unsigned int boot_flash_off;
+extern unsigned int boot_flash_sec;
+extern unsigned int boot_flash_type;
+#endif
+
+#if defined(CONFIG_CMD_NET)
+/*----------------------------------------------------------------------------
+ * SMSC9211 Ethernet from SMSC9118 family
+ *----------------------------------------------------------------------------
+ */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X		1
+#define CONFIG_SMC911X_32_BIT
+#define CONFIG_SMC911X_BASE     0x2C000000
+
+#endif /* (CONFIG_CMD_NET) */
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE	0x800
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
+
+#endif				/* __CONFIG_H */